language-pack-gnome-hr-base/0000755000000000000000000000000012704126312013063 5ustar language-pack-gnome-hr-base/debian/0000755000000000000000000000000012704126312014305 5ustar language-pack-gnome-hr-base/debian/rules0000755000000000000000000000165312704126312015372 0ustar #!/usr/bin/make -f # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 PKGNAME=$(shell grep "^Package: " debian/control | head -1 | cut -f 2 -d\ ) PKG=$(shell pwd)/debian/$(PKGNAME) LOCALEDIR=$(PKG)/usr/share/locale-langpack build: dh_testdir clean: dh_testdir dh_testroot dh_clean binary-arch: binary-indep: dh_testdir dh_testroot mkdir -p $(LOCALEDIR) cd data; \ find -type d -exec mkdir -p "$(LOCALEDIR)/{}" \; ; \ find -type f -name "*.po" -exec sh -c "N='{}'; msgfmt -o $(LOCALEDIR)/\$${N%.po}.mo \$$N" \; ; \ [ ! -e data/extra.tar ] || tar -C $(PKG) -xf data/extra.tar [ ! -e data/static.tar ] || tar -C $(PKG) -xf data/static.tar dh_installdocs -i dh_installchangelogs -i dh_compress -i dh_fixperms -i dh_installdeb -i dh_gencontrol -i dh_md5sums -i dh_builddeb -i -- -Z xz binary: binary-arch binary-indep .PHONY: build build-arch build-indep clean binary-indep binary-arch binary language-pack-gnome-hr-base/debian/postinst0000644000000000000000000000021512704126312016111 0ustar #!/bin/sh -e if [ "$1" = "configure" ]; then /usr/share/locales/install-language-pack "hr" "gnome" "$2" || true fi #DEBHELPER# exit 0 language-pack-gnome-hr-base/debian/control0000644000000000000000000000216312704126312015712 0ustar Source: language-pack-gnome-hr-base Section: translations Priority: optional Maintainer: Language pack maintainers Build-Depends-Indep: gettext Build-Depends: debhelper (>= 8) Standards-Version: 3.9.6 Package: language-pack-gnome-hr-base Architecture: all Pre-Depends: dpkg (>= 1.16.1), ${misc:Pre-Depends} Depends: ${misc:Depends}, locales (>= 2.3.6), language-pack-gnome-hr (>= ${binary:Version}) Recommends: Conflicts: language-pack-gnome-hr (<< ${binary:Version}) Replaces: language-pack-gnome-hr (<< ${binary:Version}), language-pack-hr-base (<< ${binary:Version}), language-pack-hr (<< ${binary:Version}), language-pack-gnome-hr (<< ${binary:Version}), language-pack-gnome-hr-base (<< ${binary:Version}), language-pack-kde-hr (<< ${binary:Version}), language-pack-kde-hr-base (<< ${binary:Version}) Description: GNOME translations for language Croatian Translation data for all supported GNOME packages for: Croatian . This package provides the bulk of translation data and is updated only seldom. language-pack-gnome-hr provides frequent translation updates, so you should install this as well. language-pack-gnome-hr-base/debian/copyright0000644000000000000000000000174312704126312016245 0ustar This package is developed and maintained by the Ubuntu language pack maintainers . The original source can always be found at: http://archive.ubuntu.com/ubuntu/ Copyright (C) 2004 - 2008 Canonical Ltd. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . On Debian systems, the complete text of the GNU General Public License can be found in `/usr/share/common-licenses/GPL'. language-pack-gnome-hr-base/debian/compat0000644000000000000000000000000212704126312015503 0ustar 8 language-pack-gnome-hr-base/debian/postrm0000644000000000000000000000021112704126312015546 0ustar #!/bin/sh -e if [ "$1" = "remove" ]; then /usr/share/locales/remove-language-pack "hr" "gnome" "$2" || true fi #DEBHELPER# exit 0 language-pack-gnome-hr-base/debian/changelog0000644000000000000000000000030312704126312016153 0ustar language-pack-gnome-hr-base (1:16.04+20160415) xenial; urgency=low * Initial Release. -- Ubuntu automatic language-pack builder Fri, 15 Apr 2016 08:56:42 +0000 language-pack-gnome-hr-base/debian/source/0000755000000000000000000000000012704126312015605 5ustar language-pack-gnome-hr-base/debian/source/format0000644000000000000000000000001512704126312017014 0ustar 3.0 (native) language-pack-gnome-hr-base/data/0000755000000000000000000000000012704126312013774 5ustar language-pack-gnome-hr-base/data/static.tar0000644000000000000000000365000012704125413016000 0ustar usr/share/help-langpack/hr/ubuntu-help/shell-windows-maximize.page0000644000373100047300000000342512701706776027243 0ustar langpacklangpack00000000000000 Double-click or drag a titlebar to maximize or restore a window. Shaun McCance shaunm@gnome.org Maximize and unmaximize a window

You can maximize a window to take up all of the space on your desktop and unmaximize a window to restore it to its normal size. You can also maximize windows vertically along the left and right sides of the screen, so you can look at two windows at once. See for details.

To maximize a window, grab the titlebar and drag it to the top of the screen, or double-click the titlebar. To maximize a window using the keyboard, hold down Ctrl and Super and press ↑.

To restore a window to its unmaximized size, drag it away from the edges of the screen. If the window is fully maximized, you can double-click the titlebar to restore it. You can also use the keyboard shortcut Ctrl Super ↓.

Hold down the Alt key and drag anywhere in a window to move it.

 usr/share/help-langpack/hr/ubuntu-help/net-what-is-ip-address.page0000644000373100047300000000323312701706772027005 0ustar langpacklangpack00000000000000 Jim Campbell jwcampbell@gmail.com An IP Address is like a phone number for your computer. What is an IP address?

"IP address" stands for Internet Protocol address, and each device that is connected to a network (like the internet) has one.

An IP address is similar to your phone number. Your phone number is a unique set of numbers that identifies your phone so that other people can call you. Similarly, an IP address is a unique set of numbers that identifies your computer so that it can send and receive data with other computers.

Currently, most IP addresses consist of four sets of numbers, each separated by a period. 192.168.1.42 is an example of an IP address.

An IP address can either be dynamic or static. Dynamic IP addresses are temporarily assigned each time your computer connects to a network. Static IP addresses are fixed, and do not change. Dynamic IP addresses are more common that static addresses - static addresses are typically only used when there is a special need for them, such as administering a server.

 usr/share/help-langpack/hr/ubuntu-help/nautilus-views.page0000644000373100047300000001302212701706776025614 0ustar langpacklangpack00000000000000 Specify the default view, sort order, and zoom levels for the file manager. Tiffany Antopolski tiffany.antopolski@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com Views preferences in <app>Files</app>

You can change the default view for new folders, how files and folders are sorted by default, the zoom level for the icon and compact views, and whether files are displayed in the tree sidebar. Select Files Preferences in the top bar while Files is open and select the Views tab.

Default view <gui>View new folders using</gui>

By default, new folders are shown in icon view. If you prefer the list view, you can set it here as the default. Alternatively, you can select a different view for each folder as you browse by clicking the View items as a list or View items as a grid of icons button in the toolbar.

 <gui>Arrange items</gui>

You can change the default sort order that is used in folders using the Arrange items drop-down list in the preferences to sort by name, file size, file type, when they were last modified, when they were last accessed or when they were trashed.

You can change how files are sorted in an individual folder by clicking the View options button in the toolbar and choosing By Name, By Size, By Type or By Modification Date, or by clicking the list column headers in list view. This menu only affects the current folder.

 <gui>Sort folders before files</gui>

By default, the file manager no longer shows all folders before files. To see all folders listed before files, enable this option.

 <gui>Show hidden and backup files</gui>

The file manager does not display hidden files and folders by default. You can always show hidden files by selecting this option.

You can also show hidden files in an individual window by selecting Show Hidden Files, from the View options menu in the toolbar.
Icon view defaults <gui>Default zoom level</gui>

You can make the icons and text larger or smaller by default in icon view using this option. You can also change this setting in an individual folder by clicking the View options button in the toolbar and selecting Zoom In, Zoom Out or Normal Size. If you frequently use a larger or smaller zoom level, you can set the default with this option.

In icon view, more or fewer captions are shown based on your zoom level.
List view defaults <gui>Default zoom level</gui>

You can make the icons and text larger or smaller in list view using this option. You can also do this in an individual folder by clicking the View options button in the toolbar and selecting Zoom In, Zoom Out or Normal Size.
usr/share/help-langpack/hr/ubuntu-help/documents-print.page0000644000373100047300000000234712701706770025752 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 Print documents that are stored locally or online. Print a document

To print a document:

Click the ✓ button.

In selection mode, check the document to be printed.

Click the Print button in the button bar. The Print dialog opens.

Printing is not available when more than one document is selected, or when a collection is selected.

 usr/share/help-langpack/hr/ubuntu-help/startup-applications.page0000644000373100047300000000307012701706772027001 0ustar langpacklangpack00000000000000 Choose what applications to start when you log in. Ubuntu Documentation Team Startup Applications

You can configure what applications should be started at login, in addition to the default startup applications configured on the system.

Use the Dash to find and open Startup Applications. Alternatively you can press AltF2 and run the gnome-session-properties command.

Click Add and enter the command to be executed at login (name and comment are optional). For example, to make Firefox start automatically, it's sufficient to type firefox in the Command field and confirm with Add.

You can either type the command, or click the Browse... button and select a command. Applications to autostart are typically located in the /usr/bin folder.

 usr/share/help-langpack/hr/ubuntu-help/files-search.page0000644000373100047300000000713112701706767025166 0ustar langpacklangpack00000000000000 Locate files based on file name and type. Save your searches for later use. GNOME Documentation Project gnome-doc-list@gnome.org Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Search for files

You can search for files based on their name or file type directly within the file manager. You can even save common searches, and they will appear as special folders in your home folder.

Other search applications Search

Open the file manager

If you know the files you want are under a particular folder, go to that folder.

Click the magnifying glass in the toolbar, or press CtrlF.

Type a word or words that you know appear in the file name. For example, if you name all your invoices with the word "Invoice", type invoice. Press Enter. Words are matched regardless of case.

You can narrow your results by location and file type.

Click Home to restrict the search results to your Home folder, or All Files to search everywhere.

Click + and pick a File Type from the drop-down list to narrow the search results based on file type. Click the x button to remove this option and widen the search results.

You can open, copy, delete, or otherwise work with your files from the search results, just as you would from any folder in the file manager.

Click the magnifying glass in the toolbar again to exit the search and return to the folder.

If you perform certain searches often, you can save them to access them quickly.

Save a search

Start a search as above.

When you're happy with the search parameters, click File in the menu bar and select Save Search As....

Give the search a name and click Save. If you like, select a different folder to save the search in. When you view that folder, you will see your saved search as an orange folder icon with a magnifying glass on it.

To remove the search file when you are done with it, simply delete the search as you would any other file. When you delete a saved search, it does not delete the files that the search matched.

 usr/share/help-langpack/hr/ubuntu-help/bluetooth-remove-connection.page0000644000373100047300000000346012701706776030257 0ustar langpacklangpack00000000000000 Remove a device from the list of Bluetooth devices. Jim Campbell jwcampbell@gmail.com Paul W. Frields stickster@gmail.com Remove a connection between Bluetooth devices

If you don't want to be connected to a Bluetooth device anymore, you can remove the connection. This is useful if you no longer want to use a device like a mouse or headset, or if you no longer wish to transfer files to or from a device.

Click the Bluetooth icon in the menu bar and select Bluetooth Settings.

Click the Bluetooth icon on the top bar and select Bluetooth Settings.

Select the device you want to disconnect in the left pane, then click the - icon underneath the list.

Click Remove in the confirmation window.

You can reconnect a Bluetooth device later if desired.

 usr/share/help-langpack/hr/ubuntu-help/files-preview.page0000644000373100047300000000245012701706771025374 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Quickly show and hide previews for documents, images, videos, and more. Preview files and folders

You can quickly preview files without opening them in a full-blown application. Select any file and press the space bar. The file will open in a simple preview window. Press the space bar again to dismiss the preview.

The built-in preview supports most file formats for documents, images, video, and audio. In the preview, you can scroll through your documents or seek through your video and audio.

To view a preview full-screen press f. Press f again to leave full-screen, or press the space bar to exit the preview completely.

 usr/share/help-langpack/hr/ubuntu-help/color.page0000644000373100047300000000177412701706775023745 0ustar langpacklangpack00000000000000 Richard Hughes richard@hughsie.com Why is this important, Color profiles, How to calibrate a device… Color management
Color profiles
Calibration
Problems
usr/share/help-langpack/hr/ubuntu-help/app-cheese.page0000644000373100047300000000161612701706775024634 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com It is like your own personal photo booth. Create fun photos and videos with your webcam

With the Cheese application and your webcam, you can take photos and videos, apply fun special effects and share the fun with others.

For help with using Cheese, read the Cheese user guide.

usr/share/help-langpack/hr/ubuntu-help/video-dvd-restricted.page0000644000373100047300000000420612701706770026642 0ustar langpacklangpack00000000000000 Most commercial DVDs are encrypted and will not play without decryption software. Ubuntu Documentation Project ubuntu-doc@lists.ubuntu.com How do I enable restricted codecs to play DVDs?

DVD support cannot be provided by default in Ubuntu due to legal and technical restrictions. Most commercial DVDs are encrypted and so require the use of decryption software in order to play them.

Use Fluendo to legally play DVDs

You can buy a commercial DVD decoder that can handle copy protection from Fluendo. It works with Linux and should be legal to use in all countries.

Use alternative decryption software

In some countries, the use of the below unlicensed decryption software is not permitted by law. Verify that you are within your rights to use it.

Install libdvdnav4, libdvdread4, gstreamer0.10-plugins-bad, and gstreamer0.10-plugins-ugly.

If you would like to play encrypted DVDs (see the legal note above), open the Dash and launch a Terminal.

Type the following into the screen which appears, then press Enter:

sudo /usr/share/doc/libdvdread4/install-css.sh

Enter your password to complete the installation.
usr/share/help-langpack/hr/ubuntu-help/documents-filter.page0000644000373100047300000000255512701706774026110 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Choose which documents to display. Filter documents

Click the down button next to the search bar to limit the scope of the search in these categories:

Sources: Local, Google, SkyDrive, or All.

Type: Collections, PDF Documents, Presentations, Spreadsheets, Text Documents, or All.

Title, Author, or All.

In order for Google or SkyDrive to appear in the filter list, it is necessary to configure Google or Windows Live as an online account.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless-troubleshooting.page0000644000373100047300000000432412701706774030466 0ustar langpacklangpack00000000000000 Contributors to the Ubuntu documentation wiki GNOME Documentation Project gnome-doc-list@gnome.org Identify and fix problems with wireless connections Wireless network troubleshooter

This is a step-by step troubleshooting guide to help you identify and fix wireless problems. If you cannot connect to a wireless network for some reason, try following the instructions here.

We will proceed through the following steps to get your computer connected to the internet:

Performing an initial check

Gathering information about your hardware

Checking your hardware

Attempting to create a connection to your wireless router

Performing a check of your modem and router

To get started, click on the Next link at the top right of the page. This link, and others like it on following pages, will take you through each step in the guide.

Using the command line

Some of the instructions in this guide ask you to type commands into the command line (Terminal). You can find the Terminal application in the Dash.

If you are not familiar with using a command line, don't worry - this guide will direct you at each step. All you need to remember is that commands are case-sensitive (so you must type them exactly as they appear here), and to press Enter after typing each command to run it.

 usr/share/help-langpack/hr/ubuntu-help/net-chat-video.page0000644000373100047300000000220012701706776025420 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team What applications can I use to make video calls? Video calls

You can make video calls from Ubuntu without installing any additional software using Empathy - via the Google Talk, MSN , Jabber , and SIP networks. See the Empathy manual for help on making video calls with Empathy.

Other applications which support video calls include

Skype

Ekiga

usr/share/help-langpack/hr/ubuntu-help/unity-scrollbars-intro.page0000644000373100047300000000357412701706774027273 0ustar langpacklangpack00000000000000 Overlay scrollbars are the thin orange strips on long documents. Jeremy Bicha jbicha@ubuntu.com What are overlay scrollbars?

Ubuntu includes overlay scrollbars which take up less screen space than traditional scrollbars, giving you more room for your content. While inspired by mobile devices where traditional scrollbars aren't needed, Ubuntu's overlay scrollbars are designed to work just as well with a mouse.

Some apps like Firefox and LibreOffice don't support the new scrollbars yet.

Use the scrollbars

The overlay scrollbar appears as a thin orange strip at the edge of a scrollable area. The position of the scrollbar corresponds with your screen's position in the scrollable content. The strip length corresponds with the content length; the shorter the strip, the longer the content.

Move your mouse pointer over any point on the scrollable edge of the content to reveal the thumb slider.

Ways to use the scrollbars:

Drag the thumb slider up or down to move the screen's position exactly where you want it.

Click the scrollbar to move the screen's position exactly where you want it.

usr/share/help-langpack/hr/ubuntu-help/shell-workspaces-movewindow.page0000644000373100047300000000431012701706767030277 0ustar langpacklangpack00000000000000 Open the workspace switcher and drag the window to a different workspace. GNOME Documentation Project gnome-doc-list@gnome.org Move a window to a different workspace

Please see about enabling workspaces.

Using the mouse:

Open the Launcher and click the workspace switcher button near the bottom.

Drag the window to the workspace you choose.

Using the keyboard:

Select the window you want to move.

Press CtrlAltShift→ to move the window to a workspace which is to the right of the current workspace on the workspace switcher.

Press CtrlAltShift← to move the window to a workspace which is to the left of the current workspace on the workspace switcher.

Press CtrlAltShift↓ to move the window to a workspace which is below the current workspace on the workspace switcher.

Press CtrlAltShift↑ to move the window to a workspace which is above the current workspace on the workspace switcher.

 usr/share/help-langpack/hr/ubuntu-help/color-calibrationdevices.page0000644000373100047300000000431312701706771027561 0ustar langpacklangpack00000000000000 We support a large number of calibration devices. Richard Hughes richard@hughsie.com What color measuring instruments are supported?

GNOME relies on the Argyll color management system to support color instruments. Thus the following display measuring instruments are supported:

Gretag-Macbeth i1 Pro (spectrometer)

Gretag-Macbeth i1 Monitor (spectrometer)

Gretag-Macbeth i1 Display 1, 2 or LT (colorimeter)

X-Rite i1 Display Pro (colorimeter)

X-Rite ColorMunki Design or Photo (spectrometer)

X-Rite ColorMunki Create (colorimeter)

X-Rite ColorMunki Display (colorimeter)

Pantone Huey (colorimeter)

MonacoOPTIX (colorimeter)

ColorVision Spyder 2 and 3 (colorimeter)

Colorimètre HCFR (colorimeter)

The Pantone Huey is currently the cheapest and best supported hardware in Linux.

Thanks to Argyll there's also a number of spot and strip reading reflective spectrometers supported to help you calibrating and characterizing your printers:

X-Rite DTP20 "Pulse" ("swipe" type reflective spectrometer)

X-Rite DTP22 Digital Swatchbook (spot type reflective spectrometer)

X-Rite DTP41 (spot and strip reading reflective spectrometer)

X-Rite DTP41T (spot and strip reading reflective spectrometer)

X-Rite DTP51 (spot reading reflective spectrometer)

 usr/share/help-langpack/hr/ubuntu-help/color-why-calibrate.page0000644000373100047300000000263112701706776026470 0ustar langpacklangpack00000000000000 Calibrating is important if you care about the colors you display or print. Richard Hughes richard@hughsie.com Why do I need to do calibration myself?

Generic profiles are usually bad. When a manufacturer creates a new model, they just take a few items from the production line and average them together:

Averaged profiles

Display panels differ quite a lot from unit to unit and change substantially as the display ages. It is also more difficult for printers, as just changing the type or weight of paper can invalidate the characterization state and make the profile inaccurate.

The best way of ensuring the profile you have is accurate is by doing the calibration yourself, or by letting an external company supply you with a profile based on your exact characterization state.

usr/share/help-langpack/hr/ubuntu-help/disk-partitions.page0000644000373100047300000000631012701706775025742 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Understand what volumes and partitions are and use the disk utility to manage them. Manage volumes and partitions

The word volume is used to describe a storage device, like a hard disk. It can also refer to a part of the storage on that device, because you can split the storage up into chunks. The computer makes this storage accessible via your file system in a process referred to as mounting. Mounted volumes may be hard drives, USB drives, DVD-RWs, SD cards, and other media. If a volume is currently mounted, you can read (and possibly write) files on it.

Often, a mounted volume is called a partition, though they are not necessarily the same thing. A “partition” refers to a physical area of storage on a single disk drive. Once a partition has been mounted, it can be referred to as a volume because you can access the files on it. You can think of volumes as the labeled, accessible “storefronts” to the functional “back rooms” of partitions and drives.

View and manage volumes and partitions using the disk utility

You can check and modify your computer's storage volumes with the disk utility.

Open the Dash and start the Disk Utility application.

In the pane marked Storage Devices, you will find hard disks, CD/DVD drives, and other physical devices. Click the device you want to inspect.

In the right pane, the area labeled Volumes provides a visual breakdown of the volumes and partitions present on the selected device. It also contains a variety of tools used to manage these volumes.

Be careful: it is possible to completely erase the data on your disk with these utilities.

Your computer most likely has at least one primary partition and a single swap partition. The swap partition is used by the operating system for memory management, and is rarely mounted. The primary partition contains your operating system, applications, settings, and personal files. These files can also be distributed among multiple partitions for security or convenience.

One primary partition must contain information that your computer uses to start up, or boot. For this reason it is sometimes called a boot partition, or boot volume. To determine if a volume is bootable, look at its Partition Flags in the disk utility. External media such as USB drives and CDs may also contain a bootable volume.

 usr/share/help-langpack/hr/ubuntu-help/clock-set.page0000644000373100047300000000546712701706772024513 0ustar langpacklangpack00000000000000 Update the time/date displayed at the top of the screen. GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Project ubuntu-doc@lists.ubuntu.com Michael Hill mdhillca@gmail.com Change the date and time

If the date and time displayed on the menu bar are incorrect or in the wrong format, you can change them:

If the date and time displayed on the top bar are incorrect or in the wrong format, you can change them:

To adjust the time and date, click on the clock located in the menu bar and select Date & Time Settings.

Change the system time zone by clicking on the map or entering your city into the Location box.

By default, Ubuntu periodically synchronizes the clock with a very accurate clock on the Internet so you don't have to set your clock manually.

Click on the clock at the right side of the top bar and select Date and Time Settings.

You may need to click Unlock and type the admin password.

Adjust the date and time by clicking on the arrows to choose the hour and minute. You can choose the year, month and day from the drop-down lists.

If you like, you can have the clock update itself automatically by switching Network Time on.

When Network Time is switched on, the computer will periodically synchronize its clock with a very accurate clock on the internet, so you don't have to do it manually. This will only work if you are connected to the internet.

You can also change how the hour is displayed by selecting 24-hour or AM/PM format.

 usr/share/help-langpack/hr/ubuntu-help/sound-crackle.page0000644000373100047300000000367412701706776025363 0ustar langpacklangpack00000000000000 Check your audio cables and sound card drivers. GNOME Documentation Project gnome-doc-list@gnome.org I hear crackling or buzzing when sounds are playing

If you hear crackling or buzzing when sounds are playing on your computer, you may have a problem with the audio cables or connectors, or a problem with the drivers for the sound card.

Check that the speakers are plugged in correctly.

If the speakers aren't fully plugged in, or if they are plugged into the wrong socket, you might hear a buzzing sound.

Make sure the speaker/headphone cable isn't damaged.

Audio cables and connectors can gradually wear with use. Try plugging the cable or headphones into another audio device (like an MP3 player or a CD player) to check if there is still a crackling sound. If there is, you may need to replace the cable or headphones.

Check if the sound drivers aren't very good.

Some sound cards don't work very well on Linux because they don't have very good drivers. This problem is more difficult to identify. Try searching for the make and model of your sound card on the internet, plus the search term "Ubuntu", to see if other people are having the same problem.

You can run sudo lspci -v in the Terminal to get more information about your sound card.

 usr/share/help-langpack/hr/ubuntu-help/nautilus-bookmarks-edit.page0000644000373100047300000000426112701706772027373 0ustar langpacklangpack00000000000000 Add, delete, and rename bookmarks in the file manager. Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com Edit folder bookmarks

Your bookmarks are listed in the sidebar of the file manager.

Add a bookmark:

Open the folder (or location) that you want to bookmark.

Click Bookmarks in the menu bar and select Bookmark this Location.

 Delete a bookmark:

Click Bookmarks in the menu bar and select Bookmarks... from the app menu.

In the Bookmarks window, select the bookmark you wish to delete and click the - button.

 Rename a bookmark:

Click on Files in the top bar and pick Bookmarks from the app menu.

In the Bookmarks window, select the bookmark you wish to rename.

In the Name text box, type the new name for the bookmark.

Renaming a bookmark does not rename the folder. If you have bookmarks to two different folders in two different locations, but which each have the same name, the bookmarks will have the same name, and you won't be able to tell them apart. In these cases, it is useful to give a bookmark a name other than the name of the folder it points to.

 usr/share/help-langpack/hr/ubuntu-help/a11y-right-click.page0000644000373100047300000000627612701706770025575 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org 2012 Michael Hill mdhillca@gmail.com Press and hold the left mouse button to right-click. Simulate a right mouse click

You can right-click by holding down the left mouse button. This is useful if you find it difficult to move your fingers individually on one hand, or if your pointing device only has a single button.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Click your name on the menu bar and select System Settings.

Open Universal Access and select the Pointing and Clicking tab.

Switch Simulated Secondary Click on.

You can change how long you must hold down the left mouse button before it is registered as a right click. On the Pointing and Clicking tab, change the Acceptance delay under Simulated Secondary Click.

To right-click with simulated secondary click, hold down the left mouse button where you would normally right-click, then release. The pointer fills with blue as you hold down the left mouse button. Once it is entirely blue, release the mouse button to right-click.

Some special pointers, such as the resize pointers, do not change colors. You can still use simulated secondary click as normal, even if you don't get visual feedback from the pointer.

If you use Mouse Keys, this also allows you to right-click by holding down the 5 key on your keypad.

In the Activities overview, you are always able to long-press to right-click, even with this feature disabled. Long-press works slightly differently in the overview: You do not have to release the button to right-click.

usr/share/help-langpack/hr/ubuntu-help/clock-calendar.page0000644000373100047300000000365512701706775025471 0ustar langpacklangpack00000000000000 Display your appointments on the calendar at the top of the screen. GNOME Documentation Project gnome-doc-list@gnome.org Michael Hill mdhillca@gmail.com Calendar appointments

A built in calendar application called Calendar allows you to organize your calendar appointments or events. Up to five of these, over a four-week duration, will appear by clicking on the clock in the menu bar.

Calendar appointment integration is also supported with a mail and calendar application called Evolution, which may be installed separately.
Launch the Calendar application

Appointments and events may be managed through the built in Calendar application.

Click on the Dash icon in the Launcher.

Type calendar in the Search your computer to locate the Calendar application.

Click the Calendar application icon.

Alternatively, you may also type gnome-calendar in the Terminal application.

 usr/share/help-langpack/hr/ubuntu-help/mouse-sensitivity.page0000644000373100047300000000442412701706775026342 0ustar langpacklangpack00000000000000 Change how quickly the pointer moves when you use your mouse or touchpad. Phil Bull philbull@gmail.com Tiffany Antopolski tiffany.antopolski@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Adjust speed of the mouse and touchpad

If your pointer moves too fast or slow when you move your mouse or use your touchpad, you can adjust the pointer speed for these devices.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Mouse & Touchpad.

Adjust the Pointer Speed slider until the pointer motion is comfortable for you.

You can set the pointer speed differently for your mouse and touchpad. Sometimes the most comfortable settings for one type of device aren't the most comfortable for another. Just set the sliders on both the Mouse and Touchpad sections.

The Touchpad section only appears if your system has a touchpad.

 usr/share/help-langpack/hr/ubuntu-help/net-firewall-ports.page0000644000373100047300000000475312701706774026364 0ustar langpacklangpack00000000000000 You need to specify the right network port to enable/disable network access for a program with your firewall. Paul W. Frields stickster@gmail.com Commonly-used network ports

This is a list of network ports commonly used by applications that provide network services, like file sharing or remote desktop viewing. You can change your system's firewall to block or allow access to these applications. There are thousands of ports in use, so this table isn't complete.

Port

Name

Description

5353/udp

mDNS, Avahi

Allows systems to find each other, and describe which services they offer, without you having to specify the details manually.

631/udp

Printing

Allows you to send print jobs to a printer over the network.

631/tcp

Printing

Allows you to share your printer with other people over the network.

5298/tcp

Presence

Allows you to advertise your instant messaging status to other people on the network, such as "online" or "busy".

5900/tcp

Remote desktop

Allows you to share your desktop so other people can view it or provide remote assistance.

3689/tcp

Music sharing (DAAP)

Allows you to share your music library with others on your network.
usr/share/help-langpack/hr/ubuntu-help/net-firewall-on-off.page0000644000373100047300000000557412701706773026402 0ustar langpacklangpack00000000000000 You can control which programs can access the network. This helps to keep your computer secure. Paul W. Frields stickster@gmail.com Jeremy Bicha jbicha@ubuntu.com Enable or block firewall access

Ubuntu comes equipped with the Uncomplicated Firewall (ufw) but the firewall is not enabled by default. Because Ubuntu does not have any open network services (except for basic network infrastructure) in the default installation, a firewall is not needed to block incoming attempted malicious connections.

For more information about how to use ufw, see the online documentation.

Turn the firewall on or off

To turn on the firewall, enter sudo ufw enable in a terminal. To turn off ufw, enter sudo ufw disable.

Allow or block specific network activity

Many programs are built to offer network services. For instance, you can share content, or let someone view your desktop remotely. Depending on which additional programs you install, you may need to adjust the firewall to allow these services to work as intended. UfW comes with a number of rules already pre-configured. For instance, to allow SSH connections, enter sudo ufw allow ssh in a terminal. To block ssh, enter sudo ufw block ssh.

Each program that provides services uses a specific network port. To enable access to that program's services, you may need to allow access to its assigned port on the firewall. To allow connections on port 53, enter sudo ufw allow 53 in a terminal. To block port 53, enter sudo ufw block 53.

To check the current status of ufw, enter sudo ufw status in a terminal.

Use ufw without a terminal

You can also install gufw if you prefer to set up the firewall without using a terminal. To install, click this link.

You can launch this program by searching for Firewall Configuration in the Dash. The program does not need to be kept open for the firewall to work.

 usr/share/help-langpack/hr/ubuntu-help/power-othercountry.page0000644000373100047300000000410212701706776026513 0ustar langpacklangpack00000000000000 Your computer will work, but you might need a different power cable or a travel adapter. GNOME Documentation Project gnome-doc-list@gnome.org Phil Bull philbull@gmail.com Will my computer work with a power supply in another country?

Different countries use power supplies at different voltages (usually 110V or 220-240V) and AC frequencies (usually 50 Hz or 60 Hz). Your computer should work with a power supply in a different country as long as you have an appropriate power adapter. You may also need to flip a switch.

If you have a laptop, all you should need to do is get the right plug for your power adapter. Some laptops come packaged with more than one plug for their adapter, so you may already have the right one. If not, plugging your existing one into a standard travel adapter will suffice.

If you have a desktop computer, you can also get a cable with a different plug, or use a travel adapter. In this case, however, you may need to change the voltage switch on the computer's power supply, if there is one. Many computers don't have a switch like this, and will happily work with either voltage. Look at the back of the computer and find the socket that the power cable plugs into. Somewhere nearby, there may be a small switch marked "110V" or "230V" (for example). Switch it if you need to.

Be careful when changing power cables or using travel adapters. Switch everything off first if you can.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless-hidden.page0000644000373100047300000000410512701706775026470 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Team Click the network menu on the menu bar and select Connect to Hidden Wireless Network. Connect to a hidden wireless network

It is possible to set up a wireless network so that it is "hidden." Hidden networks won't show up in the list of networks that are displayed when you click the network menu in the menu bar (or the list of wireless networks on any other computer). To connect to a hidden wireless network:

Click the network menu on the menu bar and select Connect to Hidden Wireless Network.

In the window that appears, type the network name, choose the type of wireless security, and click Connect.

You may have to check the settings of the wireless base station or router to see what the network name is. It is sometimes called the BSSID (Basic Service Set Identifier), and looks something like this: 02:00:01:02:03:04.

You should also check the wireless base station's security settings. Look for terms like WEP and WPA.

You may think that hiding your wireless network will improve security by preventing people who don't know about it from connecting. In practice, this is not the case; the network is slightly harder to find but it is still detectable.

 usr/share/help-langpack/hr/ubuntu-help/files-browse.page0000644000373100047300000000615512701706771025222 0ustar langpacklangpack00000000000000 Manage and organize files with the file manager. Tiffany Antopolski tiffany.antopolski@gmail.com Shaun McCance shaunm@gnome.org Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com Ubuntu Documentation Team Browse files and folders

Use the Files file manager to browse and organize the files on your computer. You can also use it to manage files on storage devices (like external hard disks), on file servers, and on network shares.

To start the file manager, open Files in the Launcher. You can also search for files and folders with the Dash in the same way you would search for applications. They will appear under the heading Files and Folders.

Exploring the contents of folders

In the file manager, double-click any folder to view its contents, and double-click any file to open it with the default application for that file. You can also right-click a folder to open it in a new tab or new window.

The path bar above the list of files and folders shows you which folder you're viewing, including the parent folders of the current folder. Click a parent folder in the path bar to go to that folder. Right-click any folder in the path bar to open it in a new tab or window, copy or move it, or access its properties.

If you want to quickly skip to a file in the folder you're viewing, start typing its name. A search box will appear at the top of the window and the first file which matches your search will be highlighted. Press the down arrow key, or scroll with the mouse, to skip to the next file that matches your search.

You can quickly access common places from the sidebar. If you do not see the sidebar, click the down button in the toolbar and pick Show Sidebar. You can add bookmarks to folders that you use often and they will appear in the sidebar. Use the Bookmarks menu to do this, or simply drag a folder into the sidebar.

 usr/share/help-langpack/hr/ubuntu-help/backup-check.page0000644000373100047300000000330112701706775025133 0ustar langpacklangpack00000000000000 Verify your backup was successful. GNOME Documentation Project gnome-doc-list@gnome.org Check your backup

After you have backed up your files, you should make sure that the backup was successful. If it didn't work properly, you could lose important data since some files could be missing from the backup.

When you use the file manager to copy or move files, the computer checks to make sure that all of the data transferred correctly. However, if you are transferring data that is very important to you, you may want to perform additional checks to confirm that your data has been transferred properly.

You can do an extra check by looking through the copied files and folders on the destination media. By checking to make sure that the files and folders you transferred are actually there in the backup, you can have extra confidence that the process was successful.

If you find that you do regular backups of large amounts of data, you may find it easier to use a dedicated backup program, such as Déjà Dup. Such a program is more powerful and more reliable than just copying and pasting files.

 usr/share/help-langpack/hr/ubuntu-help/sound-alert.page0000644000373100047300000000277512701706775025066 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Choose the sound to play for messages, set the alert volume, or disable alert sounds. Choose or disable the alert sound

Your computer will play a simple alert sound for certain types of messages and events. You can choose different sound clips for alerts, set the alert volume independently of your system volume, or disable alert sounds entirely.

Click the sound menu in the menu bar and click Sound Settings.

On the Sound Effects tab, select an alert sound. Each sound will play when you click on it so you can hear how it sounds.

Use the volume slider on the Sound Effects tab to set the volume of the alert sound. This won't affect the volume of your music, movies, or other sound files.

To disable alert sounds entirely, just select Mute next to Alert volume.

 usr/share/help-langpack/hr/ubuntu-help/shell-windows.page0000644000373100047300000000445612701706776025427 0ustar langpacklangpack00000000000000 Move and organize your windows. GNOME Documentation Project gnome-doc-list@gnome.org Windows and workspaces

Like other desktops, Unity uses windows to display your running applications. Using both the Dash and the Launcher, you can launch new applications and control which window is active.

In addition to windows, you can also group your applications together within workspaces. Visit the window and workspace help topics below to better learn how to use these features.

Windows Working with windows
Workspaces Working with workspaces
usr/share/help-langpack/hr/ubuntu-help/user-forgottenpassword.page0000644000373100047300000001703312701706772027365 0ustar langpacklangpack00000000000000 Advanced techniques for resetting your password GNOME Documentation Project gnome-doc-list@gnome.org I forgot my password!

It is important to choose not only a good and secure password, but also one that you can remember. If you have forgotten the password to log in to your computer account, you can follow the following steps to reset it.

If you have an encrypted home directory, you will not be able to reset a forgotten password.

If you simply want to change your password, see .

Reset password using Grub

Restart your computer, and hold down Shift during bootup to get into the Grub menu.

If you have a dual-boot machine and you choose at boot time which operating system to boot into, the Grub menu should appear without the need to hold down Shift.

If you are unable to get into the Grub boot menu, and therefore cannot choose to boot into recovery mode, you can use a live CD to reset your user password.

Press the down arrow on your keyboard to highlight the line that ends with the words 'recovery mode', then press Enter.

Your computer will now begin the boot process. After a few moments, a Recovery Menu will appear. Use your down arrow key to highlight root and press Enter.

At the # symbol, type:

passwd username, where username is the username of the account you're changing the password for.

You will be prompted to enter a new UNIX password, and to confirm the new password.

Then type:

# reboot

After you successfully log in, you will not be able to access your keyring (since you don't remember the old password). This means that all your saved passwords for wireless networks, jabber accounts, etc. will no longer be accessible. You will need to delete the old keyring and start a new one.

Reset password using a Live CD or USB

Boot the Live CD or USB.

Mount your drive.

Press AltF2 to get the Run Application window.

Type gksu nautilus to launch the file manager with system-wide privileges.

Within the drive you just mounted, you can check that it is the right drive by clicking home and then your username.

Go to the top-level directory of the mounted drive. Then go into the etc directory.

Locate the 'shadow' file and make a backup copy:

Right-click on the shadow file and select copy.

Then right-click in the empty space and select paste.

Rename the backup "shadow.bak".

Edit the original "shadow" file with a text editor.

Find your username for which you have forgotten the password. It should look something like this (the characters after the colon will be different):

username:$1$2abCd0E or

username:$1$2abCd0E:13721a:0:99999:7:::

Delete the characters after the first colon and before the second colon. This will remove the password for the account.

Save the file, exit out of everything and reboot your computer without the live CD or USB.

When you boot back into your installation, click your name in the menu bar. Open My Account and reset your password.

For Current password do not enter anything, as your current password is blank. Just click Authenticate and enter a new password.

After you successfully log in, you will not be able to access your keyring (since you don't remember the old password). This means that all your saved passwords for wireless networks, jabber accounts, etc. will no longer be accessible. You will need to delete the old keyring and start a new one.

Get rid of the keyring

This will delete all your saved passwords for wireless networks, instant messaging accounts, etc. Only do this if you can't remember the password you used for your keyring.

Go to your Home folder by typing 'home' in the Dash.

Press Ctrlh (or click ViewShow Hidden Files.)

Double click on the folder ~/.local/share.

Double click on the folder called keyrings.

Delete any files you find in the keyrings folder.

Restart the computer.

After you restart and log in you will be asked to enter your wireless networks password.

usr/share/help-langpack/hr/ubuntu-help/bluetooth-problem-connecting.page0000644000373100047300000000530212701706776030407 0ustar langpacklangpack00000000000000 The adapter could be turned off or may not have drivers, or Bluetooth might be disabled or blocked. Phil Bull philbull@gmail.com I can't connect my Bluetooth device

There are a number of reasons why you may not be able to connect to a Bluetooth device, such as a phone or headset.

Connection blocked or untrusted

Some Bluetooth devices block connections by default, or require you to change a setting to allow connections to be made. Make sure that your device is set up to allow connections.

 Bluetooth hardware not recognized

Your Bluetooth adapter/dongle may not have been recognized by the computer. This could be because drivers for the adapter aren't installed. Some Bluetooth adapters aren't supported on Linux, so you may not be able to get the right drivers for them. In this case, you will probably have to get a different Bluetooth adapter.

 Adapter not switched on

Make sure that your Bluetooth adapter is switched on. Click the Bluetooth icon in the menu bar and check that it's not disabled.

Make sure that your Bluetooth adapter is switched on. Click the Bluetooth icon on the top bar and check that it's not disabled.

 Device Bluetooth connection switched off

Check that Bluetooth is turned on on the device you're trying to connect to. For example, if you're trying to connect to a phone, make sure that it's not in airplane mode.

 No Bluetooth adapter in your computer

Many computers do not have Bluetooth adapters. You can buy an adapter if you want to use Bluetooth.

 usr/share/help-langpack/hr/ubuntu-help/look-background.page0000644000373100047300000000541112701706772025675 0ustar langpacklangpack00000000000000 Set an image, color, or gradient as your desktop background. GNOME Documentation Project gnome-doc-list@gnome.org April Gonzales loonycookie@gmail.com Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Shaun McCance shaunm@gnome.org Andre Klapper ak-47@gmx.net Michael Hill mdhillca@gmail.com Change the desktop background

You can change the image used for your desktop background, or set it to a simple color or gradient.

Right click on the desktop and select Change Desktop Background.

Select an image or color. The settings are applied immediately.

There are three choices in the drop-down list on the top right.

Select Wallpapers to use one of the many professional background images that ship with Ubuntu. With the exception of the Ubuntu wallpaper, all of the default wallpaper choices were created by winners of a Community Wallpaper Contest.

Some wallpapers are partially transparent and allow a background color to show through. For these wallpapers, there will be a color selector button in the bottom-right corner.

Select Pictures Folder to use one of your own photos from your Pictures folder. Most photo management applications store photos there.

Select Colors & Gradients to just use a flat color or a linear gradient. Color selector buttons will appear in the bottom right corner.

You can also browse for any picture on your computer by clicking the + button. Any picture you add this way will show up under Pictures Folder. You can remove it from the list by selecting it and clicking the - button. Removing a picture from the list will not delete the original file.

 usr/share/help-langpack/hr/ubuntu-help/unity-launcher-shapes.page0000644000373100047300000000445512701706767027057 0ustar langpacklangpack00000000000000 Jeremy Bicha jbicha@ubuntu.com The triangles show you your currently running applications. What do the different shapes and colors in Launcher icons mean?

When you start an app, the Launcher icon pulses to let you know that Ubuntu is starting your application. This is useful because while some applications start immediately, others may take a minute to load.

Once the application has finished starting, a set of small white triangles will show to the left and right of the Launcher square. Additional triangles will appear on the left of the Launcher square as additional windows of the same application are open (i.e. two triangles means that you have two windows of the same application open; three triangles means three windows). If you have more than three windows of the same application open, only three triangles will show.

Applications that aren't currently running have translucent Launcher icon squares. When an application is running, the Launcher icon square is full of color.
Notifications

If an application wants your attention to notify you of something (like a finished download), the Launcher icon will wiggle and glow and the white triangle will become blue. Click the Launcher icon to dismiss the notification.

Applications can also show a number on their Launcher icon. Messaging applications use the number to tell you how many unread messages you have. Software Updater uses it to tell you how many updates are available.

Finally, applications can use a progress bar to let you know how long a process is taking without you needing to keep the application window in view.

 usr/share/help-langpack/hr/ubuntu-help/about-this-guide.page0000644000373100047300000000406112701706776025772 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Team A few tips on using the Ubuntu Desktop Guide. About this guide

This guide gives you a tour of Ubuntu desktop features, answers your computer-related questions, and provides tips on using your computer effectively.

The guide is divided into small, task-oriented topics - not chapters. This means that you don't need to skim through an entire manual to find answers to your questions.

Related items are linked together. "See Also" links at the bottom of some pages direct you to related topics.

The text input box at the top of this guide acts as a search bar, and relevant results will appear beneath it as soon as you start typing. Left-click on any result to open its page.

The guide is constantly being improved. Although we attempt to provide you with a comprehensive collection of helpful information, we know we won't answer all of your questions here. We will keep adding more information to make things more helpful, though.

Thank you for taking the time to read the Ubuntu Desktop Guide.

-- The Ubuntu Documentation team

usr/share/help-langpack/hr/ubuntu-help/a11y-bouncekeys.page0000644000373100047300000000375412701706771025543 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Zanemari brze višestruke pritiske na istu tipku. Uključite odbijanje tipki

Turn on bounce keys to ignore key presses that are rapidly repeated. For example, if you have hand tremors which cause you to press a key multiple times when you only want to press it once, you should turn on bounce keys.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Otvorite Univerzalni pristup i odaberite Tipkanje tab.

Uključite Odbijanje tipki.

Use the Acceptance delay slider to change how long bounce keys waits before it registers another key press after you pressed the key for the first time. Select Beep when a key is rejected if you want the computer to make a sound each time it ignores a key press because it happened too soon after the previous key press.

usr/share/help-langpack/hr/ubuntu-help/video-dvd.page0000644000373100047300000000434612701706773024504 0ustar langpacklangpack00000000000000 You might not have the right codecs installed, or the DVD might be the wrong region. GNOME Documentation Project gnome-doc-list@gnome.org Why won't DVDs play?

If you insert a DVD into your computer and it doesn't play, you may not have the right DVD codecs installed, or the DVD might be from a different region.

Installing the right codecs for DVD playback

In order to play DVDs, you need to have the right codecs installed. A codec is a piece of software that allows applications to read a video or audio format. If you try to play a DVD and don't have the right codecs installed, the Movie Player should tell you about this and offer to install them for you.

DVDs are also copy-protected using a system called CSS. This prevents you from copying DVDs, but it also prevents you from playing them unless you have extra software to handle the copy protection.

Checking the DVD region

DVDs have a region code, which tells you in which region of the world they are allowed to be played. If the region of your computer's DVD player doesn't match the region of the DVD you are trying to play, you won't be able to play the DVD. For example, if you have a Region 1 DVD player, you will only be allowed to play DVDs from North America.

It is often possible to change the region used by your DVD player, but it can only be done a few times before it locks into one region permanently. To change the DVD region of your computer's DVD player, use regionset.

 usr/share/help-langpack/hr/ubuntu-help/files-copy.page0000644000373100047300000000764012701706767024700 0ustar langpacklangpack00000000000000 Copy or move items to a new folder. Cristopher Thomas crisnoh@gmail.com Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com Copy or move files and folders

A file or folder can be copied or moved to a new location by dragging and dropping with the mouse, using the copy and paste commands, or using keyboard shortcuts.

For example, you might want to copy a presentation onto a memory stick so you can take it to work with you. Or, you could make a back-up copy of a document before you make changes to it (and then use the old copy if you don't like your changes).

These instructions apply to both files and folders. You copy and move files and folders in exactly the same way.

Copy and paste files

Select the file you want to copy by clicking on it once.

Right-click and pick Copy, or press CtrlC.

Navigate to another folder, where you want to put the copy of the file.

Right-click and pick Paste to finish copying the file, or press CtrlV. There will now be a copy of the file in the original folder and the other folder.

 Cut and paste files to move them

Select the file you want to move by clicking on it once.

Right-click and pick Cut, or press CtrlX.

Navigate to another folder, where you want to move the file.

Right-click and pick Paste to finish moving the file, or press CtrlV. The file will be taken out of its original folder and moved to the other folder.

 Drag files to copy or move

Open the file manager and go to the folder which contains the file you want to copy.

Click Files in the top bar, select New Window (or press CtrlN) to open a second window. In the new window, navigate to the folder where you want to move or copy the file.

Click and drag the file from one window to another. This will move it if the destination is on the same device, or copy it if the destination is on a different device.

For example, if you drag a file from a USB memory stick to your Home folder, it will be copied because you're dragging from one device to another.

You can force the file to be copied by holding down the Ctrl key while dragging, or force it to be moved by holding down the Shift key while dragging.

You can't copy or move a file into a folder that is read-only. Some folders are read-only to prevent you from making changes to their contents. You can change things from being read-only by changing file permissions .

 usr/share/help-langpack/hr/ubuntu-help/net.page0000644000373100047300000000235512701706770023404 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Wireless, wired, connection problems, web browsing, email accounts, instant messaging… Networking, web, email & chat usr/share/help-langpack/hr/ubuntu-help/net-email-virus.page0000644000373100047300000000352112701706776025641 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Viruses are unlikely to infect your computer, but could infect the computers of people you email. Do I need to scan my emails for viruses?

Viruses are programs that cause problems if they manage to find their way onto your computer. A common way of them getting onto your computer is through email messages.

Viruses that can affect computers running Linux are quite rare, so you are unlikely to get a virus through email or otherwise. If you receive an email with a virus hidden in it, it will probably have no effect on your computer. As such, you probably don't need to scan your email for viruses.

You may, however, wish to scan your email for viruses in case you happen to forward a virus from one person to another. For example, if one of your friends has a Windows computer with a virus and sends you a virus-infected email, and you then forward that email to another friend with a Windows computer, then the second friend might get the virus too. You could install an anti-virus application to scan your emails to prevent this, but it's unlikely to happen and most people using Windows and Mac OS have anti-virus software of their own anyway.

 usr/share/help-langpack/hr/ubuntu-help/files-rename.page0000644000373100047300000001041412701706773025163 0ustar langpacklangpack00000000000000 Change file or folder name. GNOME Documentation Project gnome-doc-list@gnome.org Shaun McCance shaunm@gnome.org Jim Campbell jwcampbell@gmail.com Michael Hill mdhillca@gmail.com Rename a file or folder

You can use the file manager to change the name of a file or folder.

To rename a file or folder:

Right-click on the item and select Rename, or select the file and press F2.

Type the new name and press Enter.

You can also rename a file from the properties window.

When you rename a file, only the first part of the name of the file is selected, not the file extension (the part after the "."). The extension normally denotes what type of file it is (e.g. file.pdf is a PDF document), and you usually do not want to change that. If you need to change the extension as well, select the entire file name and change it.

If you renamed the wrong file, or named your file improperly, you can undo the rename. To revert the action and restore the former name, immediately click Edit in the menu bar and select Undo Rename.
Valid characters for file names

You can use any character except the / (slash) character in file names. Some devices, however, use a file system that has more restrictions on file names. Therefore, it is a best practice to avoid the following characters in your file names: |, \, ?, *, <, ", :, >, /.

If you name a file with a . as the first character, the file will be hidden when you attempt to view it in the file manager.
Common problems The file name is already in use

You can't have two files or folders with the same name in the same folder. If you try to rename a file to a name that already exists in the folder you are working in, the file manager will not allow it.

File and folder names are case sensitive, so the file name File.txt is not the same as FILE.txt. Using different file names like this is allowed, though it is not recommended.

 The file name is too long

On some file systems, file names can have no more than 255 characters in their names. This 255 character limit includes both the file name and the path to the file (e.g., /home/wanda/Documents/work/business-proposals/… ), so you should avoid long file and folder names where possible.

 The option to rename is grayed out

If Rename is grayed out, you do not have permission to rename the file. You should use caution with renaming such files, as renaming some protected files may cause your system to become unstable. See for more information.
usr/share/help-langpack/hr/ubuntu-help/keyboard-shortcuts-set.page0000644000373100047300000000557012701706772027247 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com Julita Inca yrazes@gmail.com Define or change keyboard shortcuts in Keyboard settings. Set keyboard shortcuts

To change the key or keys to be pressed for a keyboard shortcut:

Click the icon at the very right of the menu bar and select System Settings.

Open Keyboard and select the Shortcuts tab.

Select a category in the left pane, and the row for the desired action on the right. The current shortcut definition will change to New accelerator…

Hold down the desired key combination, or press Backspace to clear.
Custom shortcuts

To create your own keyboard shortcut:

Select Custom Shortcuts in the left pane, and click the + button (or click the + button in any category). The Custom Shortcut window will appear.

Type a Name to identify the shortcut, and a Command to run an application, then click Apply. For example, if you wanted the shortcut to open Rhythmbox, you could name it Music and use the rhythmbox command.

Click Disabled in the row that was just added. When it changes to New accelerator…, hold down the desired shortcut key combination.

The command name that you type should be a valid system command. You can check that the command works by opening a Terminal and typing it in there. The command that opens an application may not have exactly the same name as the application itself.

If you want to change the command that is associated with a custom keyboard shortcut, double-click the name of the shortcut. The Custom Shortcut window will appear, and you can edit the command.

 usr/share/help-langpack/hr/ubuntu-help/bluetooth.page0000644000373100047300000000236312701706767024630 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Connect, send files, turn on and off… Bluetooth

Bluetooth is a wireless protocol that allows you to connect many different types of devices to your computer. Bluetooth is commonly used for headsets and input devices like mice and keyboards. You can also use Bluetooth to send files between devices, such as from your computer to your cell phone.

Bluetooth problems Problems
usr/share/help-langpack/hr/ubuntu-help/hardware-driver.page0000644000373100047300000000330712701706771025703 0ustar langpacklangpack00000000000000 A hardware/device driver allows your computer to use devices that are attached to it. GNOME Documentation Project gnome-doc-list@gnome.org What is a driver?

Devices are the physical "parts" of your computer. They may be external like printers and monitor or internal like graphics and audio cards.

In order for your computer to be able to use these devices, it needs to know how to communicate with them. This is done by a piece of software called a device driver.

When you attach a device to your computer, you must have the correct driver installed for that device to work. For example, if you plug in a printer but the correct driver isn't available, you won't be able to use the printer. Normally, each model of device uses a driver that is not compatible with any other model.

On Linux, the drivers for most devices are installed by default, so everything should work when you plug it in. However, the drivers may need to be installed manually or may not be available at all.

In addition, some existing drivers are incomplete or partially non-functional. For example, you might find that your printer can't do double-sided printing, but is otherwise completely functional.

 usr/share/help-langpack/hr/ubuntu-help/mouse-mousekeys.page0000644000373100047300000000662712701706770025776 0ustar langpacklangpack00000000000000 Enable mouse keys to control the mouse with the keypad. Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Click and move mouse pointer using the keypad

If you have difficulties using a mouse or other pointing device, you can control the mouse pointer using the numeric keypad on your keyboard. This feature is called mouse keys.

Tap the Super key to open the Dash.

Type Universal Access and press Enter to open the Universal Access settings.

Press Tab once to select the Seeing tab.

Press ← once to switch to the Pointing and Clicking tab.

Press ↓ once to select the Mouse Keys switch then press Enter to switch it on.

Make sure that Num Lock is turned off. You will now be able to move the mouse pointer using the keypad.

These instructions provide the shortest way to enable mouse keys using only the keyboard. Select Universal Access Settings to see more accessibility options.

The keypad is a set of numerical buttons on your keyboard, usually arranged into a square grid. If you have a keyboard without a keypad (such as a laptop keyboard), you may need to hold down the function (Fn) key and use certain other keys on your keyboard as a keypad. If you use this feature often on a laptop, you can purchase external USB keypads.

Each number on the keypad corresponds to a direction. For example, pressing 8 will move the pointer upwards and pressing 2 will move it downwards. Press the 5 key to click once with the mouse, or quickly press it twice to double-click.

Most keyboards have a special key which allows you to right-click; it is often near to the space bar. Note, however, that this key responds to where your keyboard focus is, not where your mouse pointer is. See for information on how to right-click by holding down 5 or the left mouse button.

If you want to use the keypad to type numbers while mouse keys is enabled, turn Num Lock on. The mouse cannot be controlled with the keypad when Num Lock is turned on, though.

The normal number keys, in a line at the top of the keyboard, will not control the mouse pointer. Only the keypad number keys can be used.

usr/share/help-langpack/hr/ubuntu-help/backup-what.page0000644000373100047300000000475312701706776025036 0ustar langpacklangpack00000000000000 Back up anything that you can't bear to lose if something goes wrong. GNOME Documentation Project gnome-doc-list@gnome.org Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com What to back up

Your priority should be to back up your most important files as well as those that are difficult to recreate. For example, ranked from most important to least important:

Your personal files

This may include documents, spreadsheets, email, calendar appointments, financial data, family photos, or any other personal files that you would consider irreplaceable.

 Your personal settings

This includes changes you may have made to colors, backgrounds, screen resolution and mouse settings on your desktop. This also includes application preferences, such as settings for LibreOffice, your music player, and your email program. These are replaceable, but may take a while to recreate.

 System settings

Most people never change the system settings that are created during installation. If you do customize your system settings for some reason, or if you use your computer as a server, then you may wish to back up these settings.

 Installed software

The software you use can normally be restored quite quickly after a serious computer problem by reinstalling it.

In general, you will want to back up files that are irreplaceable and files that require a great time investment to replace without a backup. If things are easy to replace, on the other hand, you may not want to use up disk space by having backups of them.

 usr/share/help-langpack/hr/ubuntu-help/power-nowireless.page0000644000373100047300000000407512701706773026146 0ustar langpacklangpack00000000000000 Some wireless devices have problems handling when your computer is suspended and doesn't resume properly. GNOME Documentation Project gnome-doc-list@gnome.org Ekaterina Gerasimova kittykat3756@gmail.com Michael Hill mdhillca@gmail.com I have no wireless network when I wake up my computer

If you have suspended your computer, or it has hibernated, you may find that your wireless internet connection does not work when you resume it again. This happens when the driver for the wireless device does not fully support certain power saving features. Typically, the wireless connection fails to turn on properly when the computer is resumed.

If this happens, try switching your wireless off and then back on again:

Click the icon at the very right of the menu bar and select System Settings

Open Network and select the Wireless tab

Switch the wireless off and then on again

If the wireless still does not work, switch on Airplane Mode and then switch it off again

If this doesn't work, restarting your computer should make the wireless work again.

 usr/share/help-langpack/hr/ubuntu-help/nautilus-list.page0000644000373100047300000000675112701706770025437 0ustar langpacklangpack00000000000000 Control what information is displayed in columns in list view. Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com File manager list columns preferences

There are nine columns of information that you can display in the file manager's list view. Click Files in the menu bar, pick Preferences and choose the List Columns tab to select which columns will be visible.

Use the Move Up and Move Down buttons to choose the order in which the selected columns will appear.

<gui>Name</gui>

The name of folders and files in the folder being viewed.

 <gui>Size</gui>

The size of a folder is given as the number of items contained in the folder. The size of a file is given as bytes, KB, or MB.

 <gui>Type</gui>

Displayed as folder, or file type such as PDF document, JPEG image, MP3 audio, and more.

 <gui>Modified</gui>

Gives the date and time of the last time the file was modified.

 <gui>Owner</gui>

The name of the user the folder or file is owned by.

 <gui>Group</gui>

The group the file is owned by. On my home computers, each user is in their own group. Groups are sometimes used in corporate environments, where users might be in groups according to department or project.

 <gui>Permissions</gui>

Displays the file access permissions e.g. drwxrw-r--

The first character - is the file type. - means regular file and d means directory (folder).

The next three characters rwx specify permissions for the user who owns the file.

The next three rw- specify permissions for all members of the group that owns the file.

The last three characters in the column r-- specify permissions for all other users on the system.

Each character has the following meanings:

r : Read permission.

w : Write permission.

x : Execute permission.

- : No permission.

<gui>MIME Type</gui>

Displays the MIME type of the item.

 <gui>Location</gui>

The path to the location of the file.

 usr/share/help-langpack/hr/ubuntu-help/a11y-dwellclick.page0000644000373100047300000000626512701706774025514 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com The Hover Click (Dwell Click) feature allows you to click by holding the mouse still. Simulate clicking by hovering

You can click or drag simply by hovering your mouse pointer over a control or object on the screen. This is useful if you find it difficult to move the mouse and click at the same time. This feature is called Hover Click or Dwell Click.

When Hover Click is enabled, you can move your mouse pointer over a control, let go of the mouse, and then wait for a while before the button will be clicked for you.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Click your name on the menu bar and select System Settings.

Open Universal Access and select the Pointing and Clicking tab.

Switch Hover Click on.

The Hover Click window will open, and will stay above all of your other windows. You can use this to choose what sort of click should happen when you hover. For example, if you select Secondary Click, you will right-click when you hover. After you double-click, right-click, or drag, you will be automatically returned to clicking.

When you hover your mouse pointer over a button and don't move it, it will gradually change color. When it has fully changed color, the button will be clicked.

Adjust the Delay setting to change how long you have to hold the mouse pointer still before clicking.

You don't need to hold the mouse perfectly still when hovering to click. The pointer is allowed to move a little bit and will still click after a while. If it moves too much, however, the click will not happen.

Adjust the Motion threshold setting to change how much the pointer can move and still be considered to be hovering.

usr/share/help-langpack/hr/ubuntu-help/color-calibrationcharacterization.page0000644000373100047300000000523412701706773031476 0ustar langpacklangpack00000000000000 Calibration and characterization are different things entirely. Richard Hughes richard@hughsie.com What's the difference between calibration and characterization?

Many people are initially confused about the difference between calibration and characterization. Calibration is the process of modifying the color behavior of a device. This is typically done using two mechanisms:

Changing controls or internal settings that it has

Applying curves to its color channels

The idea of calibration is to put a device in a defined state with regard to its color response. Often this is used as a day to day means of maintaining reproducible behavior. Typically calibration will be stored in device or systems specific file formats that record the device settings or per-channel calibration curves.

Characterization (or profiling) is recording the way a device reproduces or responds to color. Typically the result is stored in a device ICC profile. Such a profile does not in itself modify color in any way. It allows a system such as a CMM (Color Management Module) or a color aware application to modify color when combined with another device profile. Only by knowing the characteristics of two devices, can a way of transferring color from one device representation to another be achieved.

Note that a characterization (profile) will only be valid for a device if it's in the same state of calibration as it was when it was characterized.

In the case of display profiles there is some additional confusion because often the calibration information is stored in the profile for convenience. By convention it is stored in a tag called the vcgt tag. Although it is stored in the profile, none of the normal ICC based tools or applications are aware of it, or do anything with it. Similarly, typical display calibration tools and applications will not be aware of, or do anything with the ICC characterization (profile) information.

usr/share/help-langpack/hr/ubuntu-help/power.page0000644000373100047300000000226012701706767023753 0ustar langpacklangpack00000000000000 Natalia Ruz nruz@alumnos.inf.utfsm.cl Suspend, energy savings, power off, screen dimming… Power & battery
Battery settings
Power problems Troubleshoot problems with power and batteries. Problems
usr/share/help-langpack/hr/ubuntu-help/net-mobile.page0000644000373100047300000000551612701706771024654 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Connect to the internet using mobile broadband Connect to mobile broadband

Mobile Broadband refers to any kind of high speed Internet connection which is provided by an external device such as a 3G USB stick or mobile phone with built-in HSPA/UMTS/GPRS data connection. Some laptops have recently been produced with mobile broadband devices already inside them.

Most mobile broadband devices should be recognized automatically when you connect them to your computer. Ubuntu will prompt you to configure the device.

The New Mobile Broadband Connection wizard will open automatically when you connect the device.

Click Forward and enter your details, including the country where your Mobile Broadband device was issued, the network provider and type of connection (for example, Contract or pre-pay).

Give your connection a name and click Apply.

Your connection is now ready to use. To connect, click the network menu in the menu bar and select your new connection.

To disconnect, click the network menu in the menu bar and click Disconnect.

If you are not prompted to configure the device when you connect it, it may still be recognized by Ubuntu. In such cases you can add the connection manually.

Click the network menu in the menu bar and select Edit Connections...

Switch to the Mobile Broadband tab.

Click Add.

This should open the New Mobile Broadband Connection wizard. Enter your details as described above.

usr/share/help-langpack/hr/ubuntu-help/files-templates.page0000644000373100047300000000412212701706773025711 0ustar langpacklangpack00000000000000 Quickly create new documents from custom file templates. Anita Reitere nitalynx@gmail.com Michael Hill mdhillca@gmail.com Templates for commonly-used document types

If you often create documents based on the same content, you might benefit from using file templates. A file template can be a document of any type with the formatting or content you would like to reuse. For example, you could create a template document with your letterhead.

Make a new template

Create a document that you are going to use as a template. For example, you could make your letterhead in a word processing application.

Save the file with the template content in the Templates folder in your Home folder. If the Templates folder doesn't exist, you will need to create it first.

 Use a template to create a document

Open the folder where you want to place the new document.

Right-click anywhere in the empty space in the folder, then choose New Document. The names of available templates will be listed in the submenu.

Choose your desired template from the list.

Enter a filename for the newly-created document.

Double-click the file to open it and start editing.

 usr/share/help-langpack/hr/ubuntu-help/shell-windows-switching.page0000644000373100047300000000602512701706775027415 0ustar langpacklangpack00000000000000 Press AltTab. GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Project ubuntu-doc@lists.ubuntu.com Switch between windows
From the Launcher

Show the Launcher by moving your mouse to the top left corner of your screen.

Applications that are running have a small white triangle arrow on the left. Click on a running application icon to switch to it.

If a running application has multiple windows open, there will be multiple white arrows on the left. Click the application icon a second time to show all open windows zoomed out. Click the window you want to switch to.

From the keyboard

Press AltTab to bring up the window switcher.

Release Alt to select the next (highlighted) window in the switcher.

Otherwise, still holding down the Alt key, press Tab to cycle through the list of open windows, or ShiftTab to cycle backwards.

Windows in the window switcher are grouped by application. Previews of applications with multiple windows pop up as you click through.

You can also move between the application icons in the window switcher with the → or ← keys, or select one by clicking it with the mouse.

Previews of applications with a single window can be displayed with the ↓ key.

Only windows from the current workspace will be shown. To show windows from all workspaces, hold down the Ctrl and Alt keys and press Tab or ShiftTab.

Press SuperW to show all open windows zoomed out.

Click the window you want to switch to.

usr/share/help-langpack/hr/ubuntu-help/net-wireless-troubleshooting-hardware-info.page0000644000373100047300000000506112701706770033205 0ustar langpacklangpack00000000000000 Contributors to the Ubuntu documentation wiki GNOME Documentation Project gnome-doc-list@gnome.org You may need details such as the model number of your wireless adapter in subsequent troubleshooting steps. Wireless network troubleshooter Gather information about your network hardware

In this step, you will collect information about your wireless network device. The way you fix many wireless problems depends on the make and model number of the wireless adapter, so you will need to make a note of these details. It can also be helpful to have some of the items that came with your computer too, like device driver installation discs. Look for the following items, if you still have them:

The packaging and instructions for your wireless devices (especially the user guide for your router)

The disc containing drivers for your wireless adapter (even if it only contains Windows drivers)

The manufacturers and model numbers of your computer, wireless adapter and router. This information can usually be found on the underside/reverse of the device.

Any version/revision numbers that may be printed on your wireless network devices or their packaging. These can be especially helpful, so look carefully.

Anything on the driver disc that identifies either the device itself, its "firmware" version, or the components (chipset) it uses.

If possible, try to get access to an alternative working internet connection so that you can download software and drivers if necessary. (Plugging your computer directly into the router with an Ethernet network cable is one way of providing this, but only plug it in when you need to.)

Once you have as many of these items as possible, click Next.

 usr/share/help-langpack/hr/ubuntu-help/color-calibrate-screen.page0000644000373100047300000000446412701706772027142 0ustar langpacklangpack00000000000000 Calibrating your screen is important to display accurate colors. Richard Hughes richard@hughsie.com Michael Hill mdhillca@gmail.com How do I calibrate my screen?

Calibrating your screen should be a requirement if you're involved in computer design or artwork.

By using a device called colorimeter you accurately measure the different colors that your screen is able to display. By running System SettingsColor you can create a profile, and the wizard will show you how to attach the colorimeter device and what settings to adjust.

By using a device called colorimeter you accurately measure the different colors that your screen is able to display. By running System SettingsColor you can create a profile, and the wizard will show you how to attach the colorimeter device and what settings to adjust.

Screens change all the time - the backlight in a TFT will half in brightness approximately every 18 months, and will get yellower as it gets older. This means you should recalibrate your screen when the [!] icon appears in the color control panel.

LED screens also change over time, but a much slower rate than TFTs.

usr/share/help-langpack/hr/ubuntu-help/nautilus-connect.page0000644000373100047300000001467612701706770026122 0ustar langpacklangpack00000000000000 View and edit files on another computer over FTP, SSH, Windows shares, or WebDAV. Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Browse files on a server or network share

You can connect to a server or network share to browse and view files on that server, exactly as if they were on your own computer. This is a convenient way to download or upload files on the internet, or to share files with other people on your local network.

To browse files over the network, open the Files application from the Dash, and click Browse Network in the sidebar. The file manager will find any computers on your local area network that advertise their ability to serve files. If you want to connect to a server on the internet, or if you do not see the computer you're looking for, you can manually connect to a server by typing in its internet/network address.

Connect to a file server

In the file manager, click Files in the menu bar and pick Connect to Server from the app menu.

Enter the address of the server, in the form of a URL. Details on supported URLs are listed below.

If you have connected to the server before, you can click on it in the Recent Servers list.

Click Connect. A new window will open showing you the files on the server. You can browse the files just as you would for those on your own computer. The server will also be added to the sidebar so you can access it quickly in the future
Writing URLs

A URL, or uniform resource locator, is a form of address that refers to a location or file on a network. The address is formatted like this:

scheme://servername.example.com/folder

The scheme specifies the protocol or type of server. The example.com portion of the address is called the domain name. If a username is required, it is inserted before the server name:

scheme://username@servername.example.com/folder

Some schemes require the port number to be specified. Insert it after the domain name:

scheme://servername.example.com:port/folder

Below are specific examples for the various server types that are supported.

Types of servers

You can connect to different types of servers. Some servers are public, and allow anybody to connect. Other servers require you to log in with a username and password.

You may not have permissions to perform certain actions on files on a server. For example, on public FTP sites, you will probably not be able to delete files.

The URL you enter depends on the protocol that the server uses to export its file shares.

SSH

If you have a secure shell account on a server, you can connect using this method. Many web hosts provide SSH accounts to members so they can securely upload files. SSH servers always require you to log in.

A typical SSH URL looks like this:

ssh://username@servername.example.com/folder

When using SSH, all the data you send (including your password) is encrypted so that other users on your network can't see it.

 FTP (with login)

FTP is a popular way to exchange files on the Internet. Because data is not encrypted over FTP, many servers now provide access through SSH. Some servers, however, still allow or require you to use FTP to upload or download files. FTP sites with logins will usually allow you to delete and upload files.

A typical FTP URL looks like this:

ftp://username@ftp.example.com/path/

 Public FTP

Sites that allow you to download files will sometimes provide public or anonymous FTP access. These servers do not require a username and password, and will usually not allow you to delete or upload files.

A typical anonymous FTP URL looks like this:

ftp://ftp.example.com/path/

Some anonymous FTP sites require you to log in with a public username and password, or with a public username using your email address as the password. For these servers, use the FTP (with login) method, and use the credentials specified by the FTP site.

 Windows share

Windows computers use a proprietary protocol to share files over a local area network. Computers on a Windows network are sometimes grouped into domains for organization and to better control access. If you have the right permissions on the remote computer, you can connect to a Windows share from the file manager.

A typical Windows share URL looks like this:

smb://servername/Share

 WebDAV and Secure WebDAV

Based on the HTTP protocol used on the web, WebDAV is sometimes used to share files on a local network and to store files on the internet. If the server you're connecting to supports secure connections, you should choose this option. Secure WebDAV uses strong SSL encryption, so that other users can't see your password.

A typical WebDAV URL looks like this:

http://example.hostname.com/path
usr/share/help-langpack/hr/ubuntu-help/accounts-remove.page0000644000373100047300000000330012701706773025722 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com Greg Beam ki7mt@yahoo.com Remove online account services Remove an account

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Select Online Accounts.

From the left windowpane, select the account you wish to remove.

Click the Remove Account button in the lower-right portion of the window.

Removing the selection from Online Accounts in no way affects the account from your service provider.

Click Remove.

Instead of deleting the account completely, you can restrict the service from being accessed by your desktop.

usr/share/help-langpack/hr/ubuntu-help/video-sending.page0000644000373100047300000000542112701706771025347 0ustar langpacklangpack00000000000000 Check that they have the right video codecs installed. GNOME Documentation Project gnome-doc-list@gnome.org Other people can't play the videos I made

If you made a video on your Linux computer and sent it to someone using Windows or Mac OS, you may find that they have problems playing the video.

To be able to play your video, the person you sent it to must have the right codecs installed. A codec is a little piece of software that knows how to take the video and display it on the screen. There are lots of different video formats and each requires a different codec to play it back. You can check which format your video is by doing:

Open the file manager.

Right-click on video file and select Properties.

Go to the Audio/Video tab and look at which codec is listed under Video.

Ask the person having problems with playback if they have the right codec installed. They may find it helpful to search the web for the name of the codec plus the name of their video playback application. For example, if your video uses the Theora format and you have a friend using Windows Media Player to try and watch it, search for "theora windows media player". You will often be able to download the right codec for free if it's not installed.

If you can't find the right codec, try the VLC media player. It works on Windows and Mac OS as well as Linux, and supports a lot of different video formats. Otherwise, try converting your video into a different format. Most video editors are able to do this, and specific video converter applications are available. Check Software to see what's available.

There are a few other problems which might prevent someone from playing your video. The video could have been damaged when you sent it to them (sometimes big files aren't copied across perfectly), they could have problems with their video playback application, or the video may not have been created properly (there could have been some errors when you saved the video).

 usr/share/help-langpack/hr/ubuntu-help/power-batterywindows.page0000644000373100047300000000364612701706775027046 0ustar langpacklangpack00000000000000 Tweaks from the manufacturer and differing battery life estimates may be the cause of this problem. GNOME Documentation Project gnome-doc-list@gnome.org Phil Bull philbull@gmail.com Why do I have less battery life than I did on Windows/Mac OS?

Some computers appear to have a shorter battery life when running on Linux than they do when running Windows or Mac OS. One reason for this is that computer vendors install special software for Windows/Mac OS that optimizes various hardware/software settings for a given model of computer. These tweaks are often highly specific, and may not be documented, so including them in Linux is difficult.

Unfortunately, there is not an easy way of applying these tweaks yourself without knowing exactly what they are. You may find that using some power-saving methods helps, though. If your computer has a variable-speed processor, you might find that changing its settings is also useful.

Another possible reason for the discrepancy is that the method of estimating battery life is different on Windows/Mac OS than on Linux. The actual battery life could be exactly the same, but the different methods give different estimates.

 usr/share/help-langpack/hr/ubuntu-help/accounts-whyadd.page0000644000373100047300000000255412701706770025714 0ustar langpacklangpack00000000000000 Susanna Huhtanen ihmis.suski@gmail.com 2012 Michael Hill mdhillca@gmail.com Greg Beam ki7mt@yahoo.com Why add your email or social media accounts to your desktop? Why should I add an account?

Adding your accounts brings a choice of services like calendar, chat, and e-mail straight to your desktop, making services a seamless part of your user experience. By adding accounts, you can keep in touch with services of different accounts, like chats, at the same time. Just set your account once and every time you start your computer all the accounts and services you've added will be ready for you.

usr/share/help-langpack/hr/ubuntu-help/power-lowpower.page0000644000373100047300000000373512701706772025633 0ustar langpacklangpack00000000000000 Allowing the battery to completely discharge is bad for it. GNOME Documentation Project gnome-doc-list@gnome.org Ekaterina Gerasimova kittykat3756@gmail.com Why did my computer turn off/suspend when the battery got to 10%?

When the charge level of the battery gets too low, your computer will automatically suspend. It does this to make sure that the battery doesn't completely discharge, since this is bad for the battery. If the battery just ran out, the computer wouldn't have time to shut down properly either.

You can change what happens when the battery level gets too low. First, click the battery menu in the menu bar and select Power Settings. At the 'When power is critically low' setting, you can choose for the computer to suspend, hibernate, or shut down. If you choose shut down, your applications and documents will not be saved when the computer turns off.

Some computers have problems suspending, and may not be able to recover the applications and documents you had open when you turn on the computer again. In this case, it is possible that you could lose some of your work if you didn't save it before the computer suspended. You may be able to fix problems with suspend though.

 usr/share/help-langpack/hr/ubuntu-help/net-antivirus.page0000644000373100047300000000350312701706775025427 0ustar langpacklangpack00000000000000 There are few Linux viruses, so you probably don't need anti-virus software. GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Team Do I need anti-virus software?

If you are used to Windows or Mac OS, you are probably also used to having anti-virus software running all of the time. Anti-virus software runs in the background, constantly checking for computer viruses that might find their way onto your computer and cause problems.

Anti-virus software does exist for Linux, but you probably don't need to use it. Viruses that affect Linux are still very rare. Some argue that this is because Linux is not as widely used as other operating systems, so no-one writes viruses for it. Others argue that Linux is intrinsically more secure, and security problems that viruses could make use of are fixed very quickly.

Whatever the reason, Linux viruses are so rare that you don't really need to worry about them at the moment.

If you want to be extra-safe, or if you want to check for viruses in files that you are passing between yourself and people using Windows and Mac OS, you can still install anti-virus software. Check in Software where a number of applications are available.

 usr/share/help-langpack/hr/ubuntu-help/net-chat.page0000644000373100047300000000141612701706770024316 0ustar langpacklangpack00000000000000 Chat on any network using Empathy, make video calls, install skype, social networking apps The Ubuntu Documentation Team Chat & Social Networking usr/share/help-langpack/hr/ubuntu-help/sharing.page0000644000373100047300000000141512701706773024250 0ustar langpacklangpack00000000000000 Desktop sharing, Share files… Ekaterina Gerasimova kittykat3756@gmail.com Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Sharing usr/share/help-langpack/hr/ubuntu-help/unity-dash-friends.page0000644000373100047300000000272712701706774026342 0ustar langpacklangpack00000000000000 Browse messages from your online social media accounts. Jeremy Bicha jbicha@ubuntu.com Friends scope

The Friends scope is the sixth lens after the Dash home in the lens bar and is represented by a speaking bubble. The Friends scope gives you access to your social media accounts.

You can use SuperG to open the Dash directly at the Friends Scope icon.

The lens will be blank until you enter your credentials in Online Accounts.
Previews

Right click on a search result to open a preview. The preview gives you more information and allows you to "like" or reshare posts.

Filters

Click Filter results to filter by account.

 usr/share/help-langpack/hr/ubuntu-help/disk-benchmark.page0000644000373100047300000000544212701706776025506 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Michael Hill mdhillca@gmail.com Run benchmarks on your hard disk to check how fast it is. Test the performance of your hard disk

To test the speed of your hard disk:

Open the Disks application from the Dash.

Open the Disks application from the activities overview.

Choose the hard disk from the Disk Drives list.

Click the gear button and select Benchmark Drive.

Click Start Benchmark and adjust the Transfer Rate and Access Time parameters as desired.

Click Start Benchmarking to test how fast data can be read from the disk. Administrative privileges may be required. Enter your password, or the password for the requested administrator account.

If Also perform write-benchmark is checked, the benchmark will test how fast data can be read from and written to the disk. This will take longer to complete.

When the test is finished, the results will appear on the graph. The green points and connecting lines indicate the samples taken; these correspond to the right axis, showing access time, plotted against the bottom axis, representing percentage time elapsed during the benchmark. The blue line represents read rates, while the red line represents write rates; these are shown as access data rates on the left axis, plotted against percentage of the disk traveled, from the outside to the spindle, along the bottom axis.

Below the graph, values are displayed for minimum, maximum and average read and write rates, average access time and time elapsed since the last benchmark test.

 usr/share/help-langpack/hr/ubuntu-help/net-macaddress.page0000644000373100047300000000400612701706767025511 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Jim Campbell jwcampbell@gmail.com Michael Hill mdhillca@gmail.com The unique identifier assigned to network hardware. What is a MAC address?

A MAC address is the unique identifier that is assigned by the manufacturer to a piece of network hardware (like a wireless card or an Ethernet card). MAC stands for Media Access Control, and each identifier is intended to be unique to a particular device.

A MAC address consists of six sets of two characters, each separated by a colon. 00:1B:44:11:3A:B7 is an example of a MAC address.

To identify the MAC address of your own network hardware:

Click the network menu on the menu bar.

Select Connection Information.

Your MAC address will be displayed as the Hardware Address.

In practice, you may need to modify or "spoof" a MAC address. For example, some internet service providers may require that a specific MAC address be used to access their service. If the network card stops working, and you need to swap a new card in, the service won't work anymore. In such cases, you would need to spoof the MAC address.

 usr/share/help-langpack/hr/ubuntu-help/printing-select.page0000644000373100047300000000241112701706770025716 0ustar langpacklangpack00000000000000 Print only specific pages, or only a range of pages. Phil Bull philbull@gmail.com Print only certain pages

To only print certain pages from the document:

Click FilePrint

In the General tab in the Print window choose Pages from the Range section.

Type the numbers of the pages you want to print in the text box, separated by commas. Use a dash to denote a range of pages.

For example, if you enter "1,3,5-7,9" in the Pages text box, pages 1,3,5,6,7 and 9 will be printed.

usr/share/help-langpack/hr/ubuntu-help/power-batteryoptimal.page0000644000373100047300000000414512701706771027010 0ustar langpacklangpack00000000000000 Tips such as "Do not let the battery charge get too low" GNOME Documentation Project gnome-doc-list@gnome.org Phil Bull philbull@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com Get the most out of your laptop battery

As laptop batteries age, they get worse at storing charge and their capacity gradually decreases. There are a few techniques that you can use to prolong their useful lifetime, although you should not expect a big difference.

Do not let the battery run all the way down. Always recharge before the battery gets very low, although most batteries have built-in safeguards to prevent the battery running too low. Recharging when it is only partially discharged is more efficient, but recharging when it is only slightly discharged is worse for the battery.

Heat has a detrimental effect on the charging efficiency of the battery. Do not let the battery get any warmer than it has to.

Batteries age even if you leave them in storage. There is little advantage in buying a replacement battery at the same time as you get the original battery - always buy replacements when you need them.

This advice applies specifically to Lithium-Ion (Li-Ion) batteries, which are the most common type. Other types of battery may benefit from different treatment.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless-adhoc.page0000644000373100047300000000351412701706776026317 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Use an ad-hoc network to allow other devices to connect to your computer and its network connections. Create a wireless hotspot

You can use your computer as a wireless hotspot. This allows other devices to connect to you without a separate network, and allows you to share an internet connection you've made with another interface, such as to a wired network or over the cellular network.

Click the icon at the very right of the menu bar and select System Settings.

Open Network and select Wireless on the left.

Click the Use as Hotspot button.

If you are already connected to a wireless network, you will be asked if you want to disconnect from that network. A single wireless adapter can only connect to or create one network at a time. Click Create Hotspot to confirm.

A network name (SSID) and security key are automatically generated. The network name will be based on the name of your computer. Other devices will need this information to connect to the hotspot you've just created.

 usr/share/help-langpack/hr/ubuntu-help/power-batteryestimate.page0000644000373100047300000000470612701706776027166 0ustar langpacklangpack00000000000000 The battery life displayed when you click on the battery icon is an estimate. GNOME Documentation Project gnome-doc-list@gnome.org Phil Bull philbull@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com The estimated battery life is wrong

When you check the remaining battery life, you may find that the time remaining that it reports is different to how long the battery actually lasts. This is because the amount of remaining battery life can only be estimated. Normally, the estimates improve over time.

In order to estimate the remaining battery life, a number of factors must be taken into account. One is the amount of power currently being used by the computer: power consumption varies depending on how many programs you have open, which devices are plugged in, and whether you are running any intensive tasks (like watching a DVD or converting music files, for example). This changes from moment to moment, and is difficult to predict.

Another factor is how the battery discharges. Some batteries lose charge faster the emptier they get. Without precise knowledge of how the battery discharges, only a rough estimate of remaining battery life can be made.

As the battery discharges, the power manager will figure out its discharge properties and will learn how to make better estimates of battery life. They will never be completely accurate, though.

If you get a completely ridiculous battery life estimate (say, hundreds of days), the power manager is probably missing some of the data it needs to make a sensible estimate.

If you unplug the power and run the laptop on battery for a while, then plug it in and let it recharge again, the power manager should be able to get the data it needs.

 usr/share/help-langpack/hr/ubuntu-help/keyboard-repeat-keys.page0000644000373100047300000000377112701706772026652 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Julita Inca yrazes@gmail.com Michael Hill mdhillca@gmail.com Make the keyboard not repeat letters when you hold down a key, or change the delay and speed of repeat keys. Turn off repeated key presses

By default, when you hold down a key on your keyboard, the letter or symbol will be repeated until you release the key. If you have difficulty picking your finger back up quickly enough, you can disable this feature, or change how long it takes before key presses start repeating.

Click the icon at the very right of the menu bar and select System Settings.

In the Hardware section, click Keyboard.

Turn off Key presses repeat when key is held down to disable repeated keys entirely.

Alternatively, adjust the Delay slider to control how long you have to hold a key down to begin repeating it, and adjust the Speed slider to control how quickly key presses repeat.

 usr/share/help-langpack/hr/ubuntu-help/shell-windows-states.page0000644000373100047300000000767412701706774026733 0ustar langpacklangpack00000000000000 Restore, resize, arrange and hide. Shaun McCance shaunm@gnome.org 2012 Window operations

Windows can be resized or concealed to suit workflow.

Minimize, restore and close

To minimize or hide a window:

Click the - in the top left hand corner of the application's menu bar. If the application is maximized (taking up your whole screen), the menu bar will appear at the very top of the screen. Otherwise, the minimize button will appear at the top of the application window.

Or press AltSpace to bring up the window menu. Then press n. The window 'disappears' into the Launcher.

To restore the window:

Click on it in the Launcher or retrieve it from the window switcher by pressing AltTab.

To close the window:

Click the x in the top left hand corner of the window, or

Press AltF4, or

Press AltSpace to bring up the window menu. Then press c.
Resize

A window cannot be resized if it is maximized.

To resize your window horizontally and/or vertically:

Move the mouse pointer into any corner of the window until it changes into a 'corner-pointer'. Click+hold+drag to resize the window in any direction.

To resize only in the horizontal direction:

Move the mouse pointer to either side of the window until it changes into a 'side-pointer'. Click+hold+drag to resize the window horizontally.

To resize only in the vertical direction:

Move the mouse pointer to the top or bottom of the window until it changes into a 'top-pointer' or 'bottom-pointer' respectively. Click+hold+drag to resize the window vertically.
Arranging windows in your workspace

To place two windows side by side:

Click on the title bar of a window and drag it toward the left edge of the screen. When the mouse pointer touches the edge, the left half of the screen becomes highlighted. Release the mouse button and the window will fill the left half of the screen.

Drag another window to the right side: when the right half of the screen is highlighted, release. Each of the two windows fills half the screen.

Pressing Alt + click anywhere in a window will allow you to move the window. Some people may find this easier than clicking on the title bar of an application.
usr/share/help-langpack/hr/ubuntu-help/addremove-ppa.page0000644000373100047300000000444012701706772025341 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Add PPAs to help test pre-release or specialty software. Add a Personal Package Archive (PPA)

Personal Package Archives (PPAs) are software repositories designed for Ubuntu users and are easier to install than other third-party repositories.

Only add software repositories from sources that you trust!

Third-party software repositories are not checked for security or reliability by Ubuntu members, and may contain software which is harmful to your computer.

Install a PPA

On the PPA's overview page, look for the heading Adding this PPA to your system. Make a note of the PPA's location, which should look similar to: ppa:mozillateam/firefox-next.

Click the Software icon in the Launcher, or search for Software in the Dash.

When Software launches, click Software & Updates

Switch to the Other Software tab.

Click Add and enter the ppa: location.

Click Add Source. Enter your password in the Authenticate window.

Close the Software & Updates window. Software will then check your software sources for new software.

usr/share/help-langpack/hr/ubuntu-help/color-calibrate-camera.page0000644000373100047300000000320312701706775027104 0ustar langpacklangpack00000000000000 Calibrating your camera is important to capture accurate colors. Richard Hughes richard@hughsie.com How do I calibrate my camera?

Camera devices are calibrated by taking a photograph of a target under the desired lighting conditions. By converting the RAW file to a TIFF file, it can be used to calibrate the camera device in the color control panel.

You will need to crop the TIFF file so that just the target is visible. Ensure the white or black borders are still visible. Calibration will not work if the image is upside-down or is distorted by a large amount.

The resulting profile is only valid under the lighting condition that you acquired the original image from. This means you might need to profile several times for studio, bright sunlight and cloudy lighting conditions.

usr/share/help-langpack/hr/ubuntu-help/user-delete.page0000644000373100047300000000364712701706771025042 0ustar langpacklangpack00000000000000 Remove users that no longer use your computer. Tiffany Antopolski tiffany@antopolski.com GNOME Documentation Project gnome-doc-list@gnome.org Shaun McCance shaunm@gnome.org Delete a user account

You can add multiple user accounts to your computer. See to learn how. If somebody is no longer using your computer, you can delete that user's account.

Click the icon at the far right of the menu bar and select System Settings.

Open User Accounts.

Click Unlock in the top right corner and type your password to make changes. You must be an administrative user to delete user accounts.

Select the user you want to delete and click the - button.

Each user has their own home folder for their files and settings. You can choose to keep or delete the user's home folder. Click Delete Files if you're sure they won't be used anymore and you need to free up disk space. These files are permanently deleted. They can't be recovered. You may want to back up the files to an external drive or CD before deleting them.

 usr/share/help-langpack/hr/ubuntu-help/power-suspend.page0000644000373100047300000000337112701706773025433 0ustar langpacklangpack00000000000000 Suspend sends your computer to sleep so it uses less power. GNOME Documentation Project gnome-doc-list@gnome.org Ekaterina Gerasimova kittykat3756@gmail.com What happens when I suspend my computer?

When you suspend the computer, you send it to sleep. All of your applications and documents remain open, but the screen and other parts of the computer switch off to save power. The computer is still switched on though, and it will still be using a small amount of power. You can wake it up by pressing a key or clicking the mouse. If that does not work, try pressing the power button.

Some computers have problems with hardware support which mean that they may not be able to suspend or hibernate properly. It is a good idea to test suspend on your computer to see if it does work before relying on it.

Always save your work before suspending

You should save all of your work before suspending the computer, just in case something goes wrong and your open applications and documents cannot be recovered when you resume the computer again.

 usr/share/help-langpack/hr/ubuntu-help/disk.page0000644000373100047300000000141012701706767023545 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Disk space, performance, problems, volumes and partitions… Disks & storage usr/share/help-langpack/hr/ubuntu-help/prefs.page0000644000373100047300000000154512701706773023740 0ustar langpacklangpack00000000000000 Settings Shaun McCance shaunm@gnome.org Keyboard, mouse, display, languages, user accounts… User & system settings usr/share/help-langpack/hr/ubuntu-help/contacts.page0000644000373100047300000000140712701706770024431 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Access your contacts. Contacts

Use Contacts to store, access or edit information for your contacts, locally or in your Online Accounts.

 usr/share/help-langpack/hr/ubuntu-help/color-gettingprofiles.page0000644000373100047300000000310212701706771027127 0ustar langpacklangpack00000000000000 Color profiles are provided by vendors and can be generated yourself. Richard Hughes richard@hughsie.com Where do I get color profiles?

The best way to get profiles is to generate them yourself, although this does require some initial outlay.

Many manufacturers do try to provide color profiles for devices, although sometimes they are wrapped up in driver bundles which you may need to download, extract and then search for the color profiles.

Some manufacturers do not provide accurate profiles for the hardware and the profiles are best avoided. A good clue is to download the profile, and if the creation date is more than a year before the date you bought the device then it's likely dummy data generated that is useless.

See for information on why vendor-supplied profiles are often worse than useless.

usr/share/help-langpack/hr/ubuntu-help/nautilus-file-properties-permissions.page0000644000373100047300000001043412701706770032137 0ustar langpacklangpack00000000000000 Control who can view and edit your files and folders. Tiffany Antopolski tiffany@antopolski.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Set file permissions

You can use file permissions to control who can view and edit files that you own. To view and set the permissions for a file, right click it and select Properties, then select the Permissions tab.

See and below for details on the types of permissions you can set.

Files

You can set the permissions for the file owner, the group owner, and all other users of the system. For your files, you are the owner, and you can give yourself read-only or read-and-write permission. Set a file to read-only if you don't want to accidentally change it.

Every user on your computer belongs to a group. On home computers, it is common for each user to have their own group, and group permissions are not often used. In corporate environments, groups are sometimes used for departments or projects. As well as having an owner, each file belongs to a group. You can set the file's group and control the permissions for all users in that group. You can only set the file's group to a group you belong to.

You can also set the permissions for users other than the owner and those in the file's group.

If the file is a program, such as a script, you must select Allow executing file as program to run it. Even with this option selected, the file manager may still open the file in an application or ask you what to do. See for more information.

Folders

You can set permissions on folders for the owner, group, and other users. See the details of file permissions above for an explanation of owners, groups, and other users.

The permissions you can set for a folder are different from those you can set for a file.

<gui>None</gui>

The user will not even be able to see what files are in the folder.

 <gui>List files only</gui>

The user will be able to see what files are in the folder, but will not be able to open, create, or delete files.

 <gui>Access files</gui>

The user will be able to open files in the folder (provided they have permission to do so on the particular file), but will not be able to create new files or delete files.

 <gui>Create and delete files</gui>

The user will have full access to the folder, including opening, creating, and deleting files.

You can also quickly set the file permissions for all the files in the folder by clicking Change Permissions for Enclosed Files. Use the drop-down lists to adjust the permissions of contained files or folders, and click Change. Permissions are applied to files and folders in subfolders as well, to any depth.

 usr/share/help-langpack/hr/ubuntu-help/documents-search.page0000644000373100047300000000247612701706771026067 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 Find your documents by title or author. Search for files

To start a search in Documents:

Press CtrlF.

Click the magnifying glass icon.

Start typing. Documents will match by title or author.

You can restrict or filter the search results by clicking the down button and selecting various filters.

 usr/share/help-langpack/hr/ubuntu-help/net-othersconnect.page0000644000373100047300000000415212701706773026260 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com You can save settings (like the password) for a network connection so that everyone who uses the computer will be able to connect to it. Other users can't connect to the internet

If you have set up a network connection but other users on your computer can't connect to it, they probably aren't entering the right settings when they try to connect. For example, if you have a wireless connection, they may not be entering the right wireless security password.

You can make it so that everyone can share the settings for a network connection once you have set it up. This means that you only need to set it up once, and everyone else on the computer will be able to connect to it without being asked any questions. To do this:

Click the network menu on the menu bar and click Edit Connections.

Find the connection you want everyone to be able to use. You will probably need to switch to the Wireless tab. Select the network name and then click Edit.

Check Available to all users and click Save. You will have to enter your admin password to save the changes. Only admin users can do this.

Other users of the computer will now be able to use this connection without entering any further details.

 usr/share/help-langpack/hr/ubuntu-help/music-player-newipod.page0000644000373100047300000000247712701706771026701 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Brand-new iPods need to be set-up using the iTunes software before you can use them. My new iPod won't work

If you have a new iPod that has never been connected to a computer before, it won't be recognized properly when you connect it to a Linux computer. This is because iPods need to be set up and updated using the iTunes software, which only runs on Windows and Mac OS X.

To set up your iPod, install iTunes on a Windows or Mac computer and plug it in. You will be led through a few steps to set it up. If asked for the Volume Format, choose MS-DOS (FAT), Windows or similar. The other format (HFS/Mac) does not work as well with Linux.

Once you have finished setup, the iPod should work normally when you plug it into a Linux computer.

 usr/share/help-langpack/hr/ubuntu-help/net-vpn-connect.page0000644000373100047300000000631412701706774025637 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org VPNs allow you to connect to a local network over the internet. Learn how to set up a VPN connection. Connect to a VPN

A VPN (or Virtual Private Network) is a way of connecting to a local network over the internet. For example, say you want to connect to the local network at your workplace while you're on a business trip. You would find an internet connection somewhere (like at a hotel) and then connect to your workplace's VPN. It would be as if you were directly connected to the network at work, but the actual network connection would be through the hotel's internet connection. VPN connections are usually encrypted to prevent people from accessing the local network you're connecting to without logging in.

There are a number of different types of VPN. You may have to install some extra software depending on what type of VPN you're connecting to. Find out the connection details from whoever is in charge of the VPN and see which VPN client you need to use. Then, open Software and search for the network-manager package which works with your VPN (if there is one) and install it.

If there isn't a NetworkManager package for your type of VPN, you will probably have to download and install some client software from the company that provides the VPN software. You'll probably have to follow some different instructions to get that working.

Once that's done, you can set up the VPN connection:

Click the network menu on the menu bar and, under VPN Connections, select Configure VPN.

Click Add and choose which kind of VPN connection you have.

Click Create and follow the instructions on the screen, entering details like your username and password as you go.

When you've finished setting-up the VPN, click the network menu on the menu bar, go to VPN Connections and click on the connection you just created. It will try to establish a VPN connection - the network icon will change as it tries to connect.

Hopefully, you will successfully connect to the VPN. If not, you may need to double-check the VPN settings you entered. You can do this by clicking the network menu, selecting Edit Connections and going to the VPN tab.

To disconnect from the VPN, click the network menu and select Disconnect under the name of your VPN connection.

 usr/share/help-langpack/hr/ubuntu-help/net-othersedit.page0000644000373100047300000000457512701706770025562 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com You need to uncheck the Available to all users option in the network connection settings. Other users can't edit the network connections

If you can edit a network connection but other users on your computer can't, you may have set the connection to be available to all users. This makes it so that everyone on the computer can connect using that connection, but only users with administrative rights are allowed to change its settings.

The reason for this is that, since everyone is affected if the settings are changed, only highly-trusted (admin) users should be allowed to modify the connection.

If other users really need to be able to change the connection themselves, make it so the connection is not set to be available to everyone on the computer. This way, everyone will be able to manage their own connection settings rather than relying on one set of shared, system-wide settings for the connection.

Make it so that the connection isn't shared any more

Click the network menu on the menu bar and click Edit Connections.

Find the connection you want everyone to be able to manage/edit themselves. Click to select it and then click Edit.

You will have to enter your admin password to change the connection. Only admin users can do this.

Uncheck Available to all users and click Save. Other users of the computer will now be able to manage the connection themselves.

 usr/share/help-langpack/hr/ubuntu-help/look-display-fuzzy.page0000644000373100047300000000516412701706775026420 0ustar langpacklangpack00000000000000 The screen resolution may be set incorrectly. GNOME Documentation Project gnome-doc-list@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com Why do things look fuzzy/pixelated on my screen?

This can happen because the display resolution that you have set it is not the right one for your screen.

To solve this, click the icon at the very right of the menu bar and go to System Settings. In the Hardware section, choose Displays. Try some of the Resolution options and set the one that makes the screen look better.

When multiple displays are connected

If you have two displays connected to the computer (for example, a normal monitor and a projector), the displays might have different resolutions. However, the computer's graphics card can only display the screen in one resolution at a time, so at least one of the displays might look fuzzy.

You can set it so that the two displays have different resolutions, but you won't be able to display the same thing on both screens simultaneously. In effect, you will have two independent screens connected at the same time. You can move windows from one screen to another, but you can't show the same window on both screens at once.

To set up the displays so that they each have their own resolution:

Click the icon at the very right of the menu bar and select System Settings. Open Displays.

Uncheck Mirror Displays.

Select each display in turn from the gray box at the top of the Displays window. Change the Resolution until that display looks right.
usr/share/help-langpack/hr/ubuntu-help/accounts-disable-service.page0000644000373100047300000000400412701706774027471 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Greg Beam ki7mt@yahoo.com Some online accounts allow you to use multiple services (like calendar and email). You can control which of these services can be used by local applications. Disable account services

Some types of online accounts allow access to several services from a single user account. For example, Google accounts provide access to email, calendar, code, contacts, among others. You can choose Google for email and Yahoo! for chat, or any combination the service provider allows.

To disable services:

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Select Online Accounts.

Select the account you want to change from left windowpane.

Services available for this account are listed in the right windowpane.

Switch off the services you do not want used.

Once a service has been disabled, local applications no longer have access to it. To regain access, go back into Online Accounts and switch it on.

usr/share/help-langpack/hr/ubuntu-help/net-nonm.page0000644000373100047300000000310712701706773024350 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Press AltF2. Type nm-applet There's no network menu in the menu bar

If the network menu has disappeared from the menu bar, your Network Manager may not be running. To start it up again:

Press AltF2

Type nm-applet and press Enter.

The Wireless Network Authentication box may pop up. Enter your password in the appropriate box and click Connect.

If this doesn't work, there could be a problem with the Network Manager. To see if this is the case, go to the Dash and open the Terminal. Type nm-applet and press Enter and see if the network menu appears. If it doesn't, you should see some error messages appear in the Terminal. These should tell you what is going wrong, but they may be quite technical in nature. If so, ask for help on a support forum and quote these error messages.

 usr/share/help-langpack/hr/ubuntu-help/windows-key.page0000644000373100047300000000432412701706770025074 0ustar langpacklangpack00000000000000 The Super key provides access to the Dash and the Launcher. GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com What is the "Super" key?

This key can usually be found on the bottom-left of your keyboard, next to the Alt key, and usually has a window/squares icon on it. It is sometimes called the Windows key, logo key, or system key.

If you have an Apple keyboard, there will not be a Windows key on your keyboard. The ⌘ (Command) key can be used instead.

The Super key serves a special function in Unity. If you press the Super key, the Dash is displayed. If you press and hold the Super key, an overlay showing many of Unity's keyboard shortcuts appears until you release the Super key.

The Super key can help you do even more than that, though. To learn about more uses for the Super key, see the keyboard shortcuts page.

 usr/share/help-langpack/hr/ubuntu-help/wacom.page0000644000373100047300000000117512701706770023723 0ustar langpacklangpack00000000000000 Adjust the settings of your Wacom tablet. Michael Hill mdhillca@gmail.com Wacom Graphics Tablet usr/share/help-langpack/hr/ubuntu-help/files.page0000644000373100047300000000346312701706767023727 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Files Searching, delete files, backups, removable drives, documents… Files, folders & search

Nautilus file manager

 Common tasks More topics
Removable drives and external disks
Backing up
Documents
Tips and questions
usr/share/help-langpack/hr/ubuntu-help/mouse-doubleclick.page0000644000373100047300000000431212701706770026217 0ustar langpacklangpack00000000000000 Control how quickly you need to press the mouse button a second time to double-click. Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Adjust the double-click speed

Double-clicking only happens when you press the mouse button twice quickly enough. If the second press is too long after the first, you'll just get two separate clicks, not a double click. If you have difficulty pressing the mouse button quickly, you should increase the timeout.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Mouse & Touchpad.

Under General, adjust the Double-click slider to a value you find comfortable.

Click the Test Your Settings button to test. A single click in the window will highlight the outer circle. A double-click will highlight the inside circle.

If your mouse double-clicks when you want it to single-click even though you have increased the double-click timeout, your mouse may be faulty. Try plugging a different mouse into your computer and see if that works properly. Alternatively, plug your mouse into a different computer and see if it still has the same problem.

This setting will affect both your mouse and touchpad, as well as any other pointing device.

 usr/share/help-langpack/hr/ubuntu-help/tips.page0000644000373100047300000000117612701706767023603 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Special characters, middle click shortcuts… Tips & tricks usr/share/help-langpack/hr/ubuntu-help/sound-nosound.page0000644000373100047300000001226712701706767025442 0ustar langpacklangpack00000000000000 Check that it's not muted, that cables are plugged in properly, and that the sound card is detected. GNOME Documentation Project gnome-doc-list@gnome.org I can't hear any sounds on the computer

If you can't hear any sounds on your computer, for example when you try to play music, try these troubleshooting steps to see if you can fix the problem.

Make sure that the sound is not muted

Click the sound menu on the menu bar (it looks like a speaker) and make sure that the sound is not muted or turned down.

Some laptops have mute switches or keys on their keyboards—try pressing that key to see if it unmutes the sound.

You should also check that you haven't muted the application that you're using to play sound (e.g. your music player or movie player). The application may have a mute or volume button in its main window, so check that. Also, click the sound menu on the menu bar and choose Sound Settings. When the Sound window appears, go to the Applications tab and check that your application is not muted.

Check that the speakers are turned on and connected properly

If your computer has external speakers, make sure that they are turned on and that the volume is turned up. Make sure that the speaker cable is securely plugged into the "output" audio socket on the back of the computer. This socket is usually light green in color.

Some sound cards are able to switch which socket they use for output (to the speakers) and input (from a microphone, for instance). The output socket may be different when running Linux than on Windows or Mac OS. Try connecting the speaker cable to the different audio sockets on the computer in turn to see if that works.

A final thing to check is that the audio cable is securely plugged into the back of the speakers. Some speakers have more than one input too.

Check that the right sound device is selected

Some computers have multiple "sound devices" installed. Some of these are capable of outputting sound and some are not, so you should check that you have the correct one selected. This might involve some trial-and-error to choose the right one.

Click the sound menu in the menu bar and click Sound Settings.

In the Sound window that appears, try selecting a different output from the Play sound through list.

For the selected device, click Test Sound. In the pop-up window, click the button for each speaker. Each button will speak its position only to the channel corresponding to that speaker.

If that doesn't work, you might want to try doing the same for any other devices that are listed.
Check that the sound card was detected properly

Your sound card may not have been detected properly. If this has happened, your computer will think that it isn't able to play sound. A possible reason for the card not being detected properly is that the drivers for the card are not installed.

Go to the Dash and open the Terminal.

Type aplay -l and press Enter.

A list of devices will be shown. If there are no playback hardware devices, your sound card has not been detected.

If your sound card is not detected, you may need to manually install the drivers for it. How you do this will depend on the card you have.

You can see what sound card you have by using the lspci command in the Terminal. You can get more complete results if you run lspci as superuser; enter sudo lspci and type your password. See if an audio controller or audio device is listed—it should have the sound card's make and model number. sudo lspci -v will show a list with more detailed information.

You may be able to find and install drivers for your card by searching the Internet. Otherwise, you can file a bug.

If you can't get drivers for your sound card, you might prefer to buy a new sound card. You can get sound cards that can be installed inside the computer and external USB sound cards.

 usr/share/help-langpack/hr/ubuntu-help/accounts-add.page0000644000373100047300000000555012701706776025171 0ustar langpacklangpack00000000000000 Jim Campbell jwcampbell@gmail.com Michael Hill mdhillca@gmail.com Greg Beam ki7mt@yahoo.com Connect to online accounts Add an account

Adding an account will help link your online accounts with your Ubuntu desktop. Thus, your email, chat, and other related applications will be set up for you.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Select Online Accounts.

Select an Account Type from the right hand windowpane.

If you want to configure more accounts, you can repeat this process afterwards.

A small web user interface will open where you can enter your online account credentials. For example, if you are setting up a Google account, enter your Google username, password and sign in.

If you entered your credentials correctly, you will be prompted to accept the terms. Select Accept to continue. Once accepted, Ubuntu needs permission to access your account. To allow access, click on the Grant Access button. When prompted, enter the current users password.

Now you can select the applications you want linked to your online account. For example, if you want to use an online account for chat, but do not want the calendar, turn the calendar option off.

After you have added the accounts, each application you have selected will automatically use those credentials when you log into your account.

For security reasons, Ubuntu will not store your password on your computer. Instead, it stores a token that is provided by the online service. If you want to fully revoke the link between your desktop and the online service, remove it.

usr/share/help-langpack/hr/ubuntu-help/files-recover.page0000644000373100047300000000365012701706773025365 0ustar langpacklangpack00000000000000 Deleted files are normally sent to the Trash, but can be recovered. GNOME Documentation Project gnome-doc-list@gnome.org Recover a file from the Trash

If you delete a file with the file manager, the file is normally placed into the Trash, and should be able to be restored.

To restore a file from the Trash:

Open the Launcher and then click the Trash shortcut which is located at the bottom of the Launcher.

If your deleted file is there, right-click on it and select Restore. It will be restored to the folder it was deleted from.

If you deleted the file by pressing ShiftDelete , or by using the command line, the file has been permanently deleted. Files that have been permanently deleted can't be recovered from the Trash.

There are a number of recovery tools available that are sometimes able to recover files that were permanently deleted. These tools are generally not very easy to use, however. If you accidentally permanently deleted a file, it's probably best to ask for advice on a support forum to see if you can recover it.

 usr/share/help-langpack/hr/ubuntu-help/sharing-bluetooth.page0000644000373100047300000000261512701706775026260 0ustar langpacklangpack00000000000000 Bluetooth file sharing and receiving options. Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Control sharing over Bluetooth

You can allow access to your Public and Downloads folders for Bluetooth file sharing, and also restrict that access to only trusted devices. Configure Personal File Sharing Preferences to control access to the shared folders on your computer.

A Bluetooth device is trusted if you have paired, or connected your computer to it. See .

 Share your <file>Public</file> folder over Bluetooth

In the Dash, open Personal File Sharing.

Select the desired Bluetooth file sharing and receiving options from the list.

 usr/share/help-langpack/hr/ubuntu-help/color-virtualdevice.page0000644000373100047300000000405712701706775026606 0ustar langpacklangpack00000000000000 A virtual device is a color managed device that is not connected to the computer. Richard Hughes richard@hughsie.com Michael Hill mdhillca@gmail.com What's a virtual color managed device?

A virtual device is a color managed device that is not connected to the computer. Examples of this might be:

An online print-shop where photos are uploaded, printed and sent to you

Photos from a digital camera stored on a memory card

To create a virtual profile for a digital camera just drag and drop one of the image files onto the System Settings Color dialog. You can then assign profiles to it like any other device or even calibrate it.

To create a virtual profile for a digital camera just drag and drop one of the image files onto the System Settings Color dialog. You can then assign profiles to it like any other device or even calibrate it.

usr/share/help-langpack/hr/ubuntu-help/display-lock.page0000644000373100047300000000370212701706772025210 0ustar langpacklangpack00000000000000 Prevent other people from using your desktop when you go away from your computer. Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Automatically lock your screen

When you leave your computer, you should lock the screen to prevent other people from using your desktop and accessing your files. You will still be logged in and all your applications will keep running, but you will have to enter your password to use your computer again. You can lock the screen manually, but you can also have the screen lock automatically.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Select Brightness & Lock.

Make sure Lock is switched on, then select a timeout from the drop-down list below. The screen will automatically lock after you have been inactive for this long. You can also select Screen turns off to lock the screen after the screen is automatically turned off, controlled with the Turn screen off when inactive for drop-down list above.

 usr/share/help-langpack/hr/ubuntu-help/color-whatisprofile.page0000644000373100047300000000257112701706771026613 0ustar langpacklangpack00000000000000 A color profile is a simple file that expresses a color space or device response. Richard Hughes richard@hughsie.com What is a color profile?

A color profile is a set of data that characterizes either a device such as a projector or a color space such as sRGB.

Most color profiles are in the form of an ICC profile, which is a small file with a .ICC or .ICM file extension.

Color profiles can be embedded into images to specify the gamut range of the data. This ensures that users see the same colors on different devices.

Every device that is processing color should have it's own ICC profile and when this is achieved the system is said to have an end-to-end color-managed workflow. With this kind of workflow you can be sure that colors are not being lost or modified.

usr/share/help-langpack/hr/ubuntu-help/display-dimscreen.page0000644000373100047300000000521212701706771026226 0ustar langpacklangpack00000000000000 Dim the screen to save power or increase the brightness to make it more readable in bright light. GNOME Documentation Project gnome-doc-list@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Shaun McCance shaunm@gnome.org Ekaterina Gerasimova kittykat3756@gmail.com Set screen brightness

You can change the brightness of your screen to save power or to make the screen more readable in bright light. You can also have the screen dim automatically when on battery power and have it turn off automatically when not in use.

Set the brightness

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Select Brightness & Lock.

Adjust the Brightness slider to a comfortable value.

Many laptop keyboards have special keys to adjust the brightness. These have a picture that looks like the sun and are located on the function keys at the top. Hold down the Fn key to use these keys.

Select Dim screen to save power to have the brightness automatically lowered when you're on battery power. The backlight of your screen can take a lot of power and significantly reduce how long your battery will last before it needs to be recharged.

The screen will automatically turn off after you haven't used it for a while. This only affects the display, and doesn't turn off your computer. You can adjust how long you have to be inactive with the Turn screen off when inactive for option.

 usr/share/help-langpack/hr/ubuntu-help/user-add.page0000644000373100047300000000655212701706775024332 0ustar langpacklangpack00000000000000 Add new users so that other people can log in to the computer. GNOME Documentation Project gnome-doc-list@gnome.org Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Add a new user account

You can add multiple user accounts to your computer. Give one account to each person in your household or company. Every user has their own home folder, documents, and settings.

Click the icon at the far right of the menu bar and select System Settings.

Open User Accounts.

You need administrator privileges to add user accounts. Click Unlock in the top right corner and type your password.

In the list of accounts on the left, click the + button to add a new user account.

If you want the new user to have administrative access to the computer, select Administrator for the account type. Administrators can do things like add and delete users, install software and drivers, and change the date and time.

Enter the new user's full name. The username will be filled in automatically based on the full name. The default is probably OK, but you can change it if you like.

Click Create.

The account is initially disabled until you choose what to do about the user's password. Under Login Options click Account disabled next to Password. Select Set a password now from the Action drop-down list, and have the user type their password in the New password and Confirm password fields. See .

You can also click the button next to the New password field to select a randomly generated secure password. These passwords are hard for others to guess, but they can be hard to remember, so be careful.

Click Change.

In the User Accounts window you can click the image next to the user's name on the right to set an image for the account. This image will be shown in the login window. GNOME provides some stock photos you can use, or you can select your own or take a picture with your webcam.

 usr/share/help-langpack/hr/ubuntu-help/accounts-provider-not-available.page0000644000373100047300000000335012701706775031002 0ustar langpacklangpack00000000000000 Baptiste Mille-Mathias baptistem@gnome.org Kevin M. Godby kevin@godby.org Michael Hill mdhillca@gmail.com Greg Beam ki7mt@yahoo.com Why aren't service providers listed? Why is my account type not on the list?

Support for your favorite online service provider needs someone to develop it. Currently, the following types of online accounts are supported:

Facebook

Flickr

Google

Twitter

AIM

Windows Live

Salut

Jabber

Yahoo

If you're interested in adding support for other services, contact the developers on the bug tracker.

usr/share/help-langpack/hr/ubuntu-help/power-hotcomputer.page0000644000373100047300000000522212701706773026320 0ustar langpacklangpack00000000000000 Computers usually get warm, but if they get too hot they can overheat, which can be damaging. GNOME Documentation Project gnome-doc-list@gnome.org My computer gets really hot

Most computers get warm after a while, and some can get quite hot. This is normal: it's simply part of the way that the computer cools itself. However, if your computer gets very warm it could be a sign that it is overheating, which can potentially cause damage.

Most laptops get reasonably warm once you have been using them for a while. It's generally nothing to worry about - computers produce a lot of heat and laptops are very compact, so they need to remove their heat rapidly and their outer casing warms up as a result. Some laptops do get too hot, however, and may be uncomfortable to use. This is normally the result of a poorly-designed cooling system. You can sometimes get additional cooling accessories which fit to the bottom of the laptop and provide more efficient cooling.

If you have a desktop computer which feels hot to the touch, it may have insufficient cooling. If this concerns you, you can buy extra cooling fans or check that the cooling fans and vents are free from dust and other blockages. You might want to consider putting the computer in a better-ventilated area too - if kept in confined spaces (e.g. in a cupboard), the computer's cooling system may not be able to remove heat and circulate cool air fast enough.

Some people are concerned about the health risks of using hot laptops. There are suggestions that prolonged use of a hot laptop on your lap might possibly reduce (male) fertility, and there are reports of minor burns being suffered too (in extreme cases). If you are concerned about these potential problems, you may wish to consult a medical practitioner for advice. Of course, you can simply choose not to rest the laptop on your lap.

Most modern computers will shut themselves down if they get too hot, to prevent themselves from becoming damaged. If your computer keeps shutting down, this might be the reason. If your computer is overheating, you will probably need to get it repaired.

 usr/share/help-langpack/hr/ubuntu-help/shell-workspaces.page0000644000373100047300000000534112701706773026105 0ustar langpacklangpack00000000000000 Workspaces are a way of grouping windows on your desktop. GNOME Documentation Project gnome-doc-list@gnome.org What is a workspace, and how will it help me?

Workspace switcher button

Workspaces refer to the grouping of windows on your desktop. These virtual desktops increase the size of your working area. Workspaces are meant to reduce clutter and make the desktop easier to navigate.

Workspaces can be used to organize your work. For example, you could have all your communication windows, such as e-mail and your chat program, on one workspace, and the work you are doing on a different workspace. Your music manager could be on a third workspace.

Enable workspaces

Click the icon at the very right of the menu bar and select System Settings.

In the Personal section, click Appearance and select the Behavior tab.

Tick the Enable workspaces checkbox.

Now you can open the Launcher and click the workspace switcher icon near the bottom. By default, Ubuntu shows 4 workspaces, arranged in 2 rows and 2 columns. You can change the number of workspaces:

Change the number of workspaces

Go to the Dash and open the Terminal.

To change the number of rows, type the following command, changing the final number to the number you wish. Press Enter.

gsettings set org.compiz.core:/org/compiz/profiles/unity/plugins/core/ vsize 2

To change the number of columns, type the following command, changing the final number to the number you wish. Press Enter.

gsettings set org.compiz.core:/org/compiz/profiles/unity/plugins/core/ hsize 3 usr/share/help-langpack/hr/ubuntu-help/keyboard-layouts.page0000644000373100047300000001567412701706776026132 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org 2012 Julita Inca yrazes@gmail.com Michael Hill mdhillca@gmail.com Juanjo Marín juanj.marin@juntadeandalucia.es Ubuntu Documentation Team Add input sources and switch between them. Use alternative input sources

Keyboards come in hundreds of different layouts for different languages. Even for a single language, there are often multiple keyboard layouts, such as the Dvorak layout for English. You can make your keyboard behave like a keyboard with a different layout, regardless of the letters and symbols printed on the keys. This is useful if you often switch between multiple languages.

Some languages, such as Chinese or Korean, require a more complex input method than just a simple key to character mapping. Consequently some of the input sources you can choose between enable such a method. More about that in the section Complex input methods.

Add input sources

You can preview an image of any layout by selecting it in the list and clicking preview.

Click the icon at the very right of the menu bar and select System Settings.

In the Personal section, click Text Entry.

Click the + button, select an input source, and click Add.

The default source is the source at the top of the list. Use the ↑ and ↓ buttons to move sources up and down in the list.

If you select a source with an input method, you can click preferences to access that method's preferences dialog if any.
Input source indicator

You can quickly switch between selected sources using the input source indicator in the menu bar. The menu will display a short identifier for the current source, such as En for the standard English layout or a symbol in case of a source that uses a special input method, e.g. Chinese (Chewing). Click the input source indicator and select from the menu the source you want to use.

Keyboard shortcuts

You can also use keyboard shortcuts to quickly switch between your selected input sources. By default the shortcut for switching to next source is SuperSpace, but you can change it:

Click the icon at the very right of the menu bar and select System Settings.

In the Personal section, click Text Entry.

Click the current shortcut definition below the label Switch to next source using.

When the shortcut definition has changed to New accelerator..., press the keys you want to use as the new shortcut.
Set input source for all windows or individually for each window

When you use multiple sources, you can choose to have all windows use the same source or to set a different source for each window. Using a different source for each window is useful, for example, if you're writing an article in another language in a word processor window. Your input source selection will be remembered for each window as you switch between windows.

By default, new windows will use the default input source. You can instead choose to have them use the source of the window you were last using.

Complex input methods

Recommended frameworks for input methods are IBus and Fcitx. The latter is the default framework in Ubuntu for Chinese, Japanese, Korean and Vietnamese.

Input source options with input methods are only available if respective input method (IM) engine is installed. When you install a language, a suitable IM engine is automatically installed if applicable.

For example, to prepare for typing Korean (Hangul) on an English system, follow these steps:

Install Korean. One of the installed packages is fcitx-hangul, the Hangul IM engine for Fcitx.

Close Language Support and open it again.

Select fcitx as the Keyboard input method system.

Log out and log in again.

Click the icon at the very right of the menu bar and select System Settings.

In the Personal section, click Text Entry.

Click the + button, select Hangul (Fcitx), and click Add.

This will make Hangul available in the Fcitx input source indicator in the menu bar. (The design differs from the IBus equivalent.)

If you prefer some other IM engine than the one which is installed automatically when you install a language, you can install the IBus or Fcitx IM engine of your choice separately.

 usr/share/help-langpack/hr/ubuntu-help/sharing-desktop.page0000644000373100047300000000735112701706774025725 0ustar langpacklangpack00000000000000 Ekaterina Gerasimova kittykat3756@gmail.com Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Let other people view and interact with your desktop using VNC. Share your desktop

You can let other people view and control your desktop from another computer with a desktop viewing application. Configure Desktop Sharing to allow others to access your desktop and set the security preferences.

In the Dash, open Desktop Sharing.

To let others view your desktop, select Allow other users to view your desktop. This means that other people will be able to attempt to connect to your computer and view what's on your screen.

To let others interact with your desktop, select Allow other users to control your desktop. This may allow the other person to move your mouse, run applications, and browse files on your computer, depending on the security settings which you are currently using.
Security

It is important that you consider the full extent of what each security option means before changing it.

Confirm access to your machine

If you want to be able to choose whether to allow someone to access your desktop, select You must confirm each access to this machine. If you disable this option, you will not be asked whether you want to allow someone to connect to your computer.

This option is enabled by default.

 Enable password

To require other people to use a password when connecting to your desktop, select Require the user to enter this password. If you do not use this option, anyone can attempt to view your desktop.

This option is disabled by default, but you should enable it and set a secure password.

 Allow access to your desktop over the Internet

If your router supports UPnP Internet Gateway Device Protocol and it is enabled, you can allow other people who are not on your local network to view your desktop. To allow this, select Automatically configure UPnP router to open and forward ports. Alternatively, you can configure your router manually.

This option is disabled by default.
Show notification area icon

To be able to disconnect someone who is viewing your desktop, you need to enable this option. If you select Always, this icon will be visible regardless of whether someone is viewing your desktop or not.

If this option is disabled, it is possible for someone to connect to your desktop without your knowledge, depending on the security settings.
usr/share/help-langpack/hr/ubuntu-help/power-batterybroken.page0000644000373100047300000000313612701706770026621 0ustar langpacklangpack00000000000000 Your battery is probably not broken; it's more likely that it's just old. GNOME Documentation Project gnome-doc-list@gnome.org An error reports my battery has low capacity

When you first log in, you might see a message that says:

Battery may be broken. Your battery has a very low capacity which means that it may be old or broken.

This message is displayed when the computer detects that your battery is not capable of storing much charge. The most likely reason for this is that your battery is old; it's probably not broken, so there's no need to worry.

Over time, all laptop batteries lose their ability to store charge. After a while (normally a year or more), the battery will only be able to store a fraction of the charge that it could when it was new. The message above is shown when this happens.

If your computer or battery is relatively new, it should be capable of holding a high percentage of its design charge. If it can't, then your battery may be broken and you might need to seek a replacement.

 usr/share/help-langpack/hr/ubuntu-help/net-install-moonlight.page0000644000373100047300000000301012701706771027034 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Some websites use Silverlight to display web pages. The Moonlight plug-in lets you view these pages. Install the Silverlight plug-in

Silverlight is a plug-in for your web browser which allows you to watch videos and use interactive web pages on some websites. Some websites won't work without Silverlight.

If you view a Silverlight-enabled website but don't have the plug-in installed, you will probably see a message telling you so. This message should have instructions telling you how to get the plug-in, but these instructions might not be suitable for your web browser or version of Linux.

If you want to view Silverlight-enabled websites, you should install the Moonlight plug-in instead. This is a free, open-source version of Silverlight which runs on Linux.

Please see the Moonlight website for more information and installation instructions.

 usr/share/help-langpack/hr/ubuntu-help/legal.xml0000644000373100047300000000050012701706776023562 0ustar langpacklangpack00000000000000

Ovaj rad je licenciran pod Creative Commons Attribution-ShareAlike 3.0 Unported License.

 usr/share/help-langpack/hr/ubuntu-help/hardware-driver-proprietary.page0000644000373100047300000000330612701706775030264 0ustar langpacklangpack00000000000000 Proprietary device drivers are not freely available or open source. Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com What are proprietary drivers?

Most of the devices (hardware) attached to your computer should function properly in Ubuntu. These devices are likely to have open source drivers, which means that the drivers can be modified by the Ubuntu developers and problems with them can be fixed.

Some hardware does not have open source drivers, usually because the hardware manufacturer has not released details of their hardware which would make it possible to create such a driver. These devices may have limited functionality or may not work at all.

If a proprietary driver is available for a certain device, you can install it in order to allow your device to function properly, or to add new features. For example, installing a proprietary driver for certain graphics cards may allow you to use more advanced visual effects.

Many computers do not need proprietary drivers at all because the open source drivers fully support the hardware.

Most problems with proprietary drivers cannot be fixed by Ubuntu developers.

 usr/share/help-langpack/hr/ubuntu-help/shell-workspaces-switch.page0000644000373100047300000000372012701706772027402 0ustar langpacklangpack00000000000000 Open the workspace switcher and double-click one of the workspaces. GNOME Documentation Project gnome-doc-list@gnome.org Switch between workspaces

Please see about enabling workspaces.

 Using the mouse:

Open the Launcher and click the workspace switcher button near the bottom. Double-click on any window or workspace to switch to it, or press the workspace switcher button again to return to your previous workspace.

 Using the keyboard:

Press CtrlAlt→ to move to a workspace which is to the right of the current workspace.

Press CtrlAlt← to move to a workspace which is to the left of the current workspace.

Press CtrlAlt↓ to move to a workspace which is below the current workspace.

Press CtrlAlt↑ to move to a workspace which is above the current workspace.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless-wepwpa.page0000644000373100047300000000261512701706772026541 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org WEP and WPA are ways of encrypting data on wireless networks. What do WEP and WPA mean?

WEP and WPA (along with WPA2) are names for different encryption tools used to secure your wireless connection. Encryption scrambles the network connection so that no one can "listen in" to it and look at which web pages you are viewing, for example. WEP stands for Wired Equivalent Privacy, and WPA stands for Wireless Protected Access. WPA2 is the second version of the WPA standard.

Using some encryption is always better than using none, but WEP is the least secure of these standards, and you should not use it if you can avoid it. WPA2 is the most secure of the three. If your wireless card and router support WPA2, that is what you should use when setting up your wireless network.

 usr/share/help-langpack/hr/ubuntu-help/display-dual-monitors.page0000644000373100047300000000562112701706770027055 0ustar langpacklangpack00000000000000 Set up dual monitors on your laptop. Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Connect an external monitor to your laptop
Set up an external monitor

To set up an external monitor with your laptop, connect the monitor to your laptop. If your system doesn't recognize it immediately, or you would like to adjust the settings:

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Displays.

Click on the image of the monitor you would like to activate or deactivate, then switch it ON/OFF.

By default, the Launcher only shows on the primary monitor. To change which monitor is "primary", change the monitor in the Launcher Placement drop-down box. You could also drag the Launcher in the preview to the monitor you want to set as the "primary" monitor.

If you want the Launcher to show on all monitors, change Launcher Placement to All Displays.

To change the "position" of a monitor, click on it and drag it to the desired position.

If you would like both monitors to display the same content, check the Mirror displays box.

When you are happy with your settings, click Apply and then click Keep This Configuration.

To close the Displays click on the x in the top corner.

Sticky Edges

A typical problem with dual monitors is that it's easy for the mouse pointer to "slip" to the other monitor when you don't want it to. Unity's Sticky Edges feature helps with that problem by requiring you to push a little bit harder to move the mouse pointer from one monitor to the other.

You can switch Sticky Edges off if you don't like this feature.

 usr/share/help-langpack/hr/ubuntu-help/report-ubuntu-bug.page0000644000373100047300000000575412701706767026240 0ustar langpacklangpack00000000000000 How and where to report problems with Ubuntu. Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Report a problem in Ubuntu

If you notice a problem in Ubuntu, you can file a bug report.

Type AltF2 and type ubuntu-bug nameofprogram

If you have a hardware issue or don't know the name of the program affected, just type ubuntu-bug

After running one of the above commands, Ubuntu will gather information about the bug. This may take a few minutes. Review the collected information if you wish. Click Send to continue.

A new web browser tab will open to continue processing the bug data. Ubuntu uses the website Launchpad to manage its bug reports. If you do not have a Launchpad account, you will need to register for one to file a bug and receive email updates about its status. You can do this by clicking Create a new account.

After logging in to Launchpad, enter a description of the problem in the summary field.

After clicking Next Launchpad will search for similar bugs in case the bug you are reporting has already been reported. If the bug has already been reported, you can mark that bug as also affecting you. You can also subscribe to the bug report to receive updates about progress with fixing it. If the bug has not already been reported, click No, I need to report a new bug.

Fill in the description field with as much information as you can. It's important that you specify three things:

What you expected to happen

What actually happened

If possible, a minimal series of steps necessary to make it happen, where step 1 is "start the program"

Your report will be given an ID number, and its status will be updated as it is being dealt with. Thanks for helping make Ubuntu better!

If you get the "This is not a genuine Ubuntu package" error, it means that the software you are trying to report a bug about is not from the official Ubuntu repositories. In this case, you cannot use Ubuntu's built-in bug reporting tool.

For more information about reporting bugs in Ubuntu, please read the extensive online documentation.

 usr/share/help-langpack/hr/ubuntu-help/files-removedrive.page0000644000373100047300000000553112701706772026246 0ustar langpacklangpack00000000000000 Jim Campbell jwcampbell@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com 2012 Eject or unmount a USB flash drive, CD, DVD, or other device. Safely remove an external drive

When you use external storage devices like USB flash drives, you should safely remove them before unplugging them. If you just unplug a device, you run the risk of unplugging while an application is still using it. This could result in some of your files being lost or damaged. When you use an optical disc like a CD or DVD, you can use the same steps to eject the disc from your computer.

To eject a removable device:

Open the file manager.

Locate the device in the sidebar. It should have a small eject icon next to the name. Click the eject icon to safely remove or eject the device.

Alternately, you can right-click the name of the device in the sidebar and select Eject.
Safely remove a device that is in use

If any of the files on the device are open and in use by an application, you will not be able to safely remove the device. You will be prompted with a window telling you that "the volume is busy," and listing all the open files on the device. Once you close all the files on the device, the device will automatically be safe to remove. At that time you can unplug or eject it.

If you can't close one of the files, for example if the application using the file is locked up, you can right-click the file in the Volume is busy window and select End Process. This will force the entire locked up application to close, which could close other files you have open with that application.

You can also choose Eject Anyway to remove the device without closing the files. This may cause errors in applications that have those files open.
usr/share/help-langpack/hr/ubuntu-help/screen-shot-record.page0000644000373100047300000000374712701706772026334 0ustar langpacklangpack00000000000000 Take a picture of what's happening on your screen. Tiffany Antopolski tiffany.antopolski@gmail.com 2011 Shaun McCance shaunm@gnome.org 2012 Screenshots

You can take a picture of your screen (a screenshot). This is useful if you want to show someone how to do something on the computer, for example. Screenshots are just normal picture files, so you can email them and share them on the web.

Take a screenshot

To take a picture of what's on your screen:

Go to the Dash and open the Screenshot tool.

In the Take Screenshot window, select whether to grab the entire desktop, a single window, or an area of the screen. Set a delay if you need to select a window or otherwise set up your desktop for the screenshot. Then choose any effects you want.

Click Take Screenshot.

If you selected Select area to grab, the pointer changes into a crosshair. Click and drag the area you want for the screenshot.

In the Save Screenshot window, enter a file name and choose a folder, then click Save.
usr/share/help-langpack/hr/ubuntu-help/color-calibrate-scanner.page0000644000373100047300000000346212701706771027310 0ustar langpacklangpack00000000000000 Calibrating your scanner is important to capture accurate colors. Richard Hughes richard@hughsie.com Michael Hill mdhillca@gmail.com How do I calibrate my scanner?

You scan in your target file and save it as an uncompressed TIFF file. You can then click Calibrate… from System SettingsColor to create a profile for the device.

You scan in your target file and save it as an uncompressed TIFF file. You can then click Calibrate… from System SettingsColor to create a profile for the device.

Scanner devices are incredibly stable over time and temperature and do not usually need to be recalibrated.

usr/share/help-langpack/hr/ubuntu-help/nautilus-behavior.page0000644000373100047300000001065512701706771026262 0ustar langpacklangpack00000000000000 Single-click to open files, run or view executable text files, and specify trash behavior. Tiffany Antopolski tiffany@antopolski.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Sindhu S sindhus@live.in File manager behavior preferences

You can control whether you single-click or double-click files, how executable text files are handled, and the trash behavior. Click Files in the menu bar, pick Preferences and select the Behavior tab.

Behavior <gui>Single click to open items</gui> <gui>Double click to open items</gui>

By default, clicking selects files and double-clicking opens them. You can instead choose to have files and folders open when you click on them once. When you use single-click mode, you can hold down the Ctrl key while clicking to select one or more files.
Executable text files

An executable text file is a file that contains a program that you can run (execute). The file permissions must also allow for the file to run as a program. The most common are Shell, Python and Perl scripts. These have extensions .sh, .py and .pl, respectively.

When you open an executable text file, you can select from:

Run executable text files when they are opened

View executable text files when they are opened

Ask each time

If Ask each time is selected, a dialog will pop up asking if you wish to run or view the selected text file.

Executable text files are also called scripts. All scripts in ~/.local/share/nautilus/scripts folder will appear in the context menu for a file under the Scripts submenu. When a script is executed from a local folder, all selected files will be pasted to the script as parameters. To execute a script on a file:

Navigate to the desired folder.

Select the desired file.

Right click on the file to open the context menu and select the desired script to execute from the Scripts menu.

A script will not be passed any parameters when executed from a remote folder such as a folder showing web or ftp content.
File manager trash preferences Trash <gui>Ask before emptying the Trash or deleting files</gui>

This option is selected by default. When emptying the trash, a message will be displayed confirming that you would like to empty the trash or delete files.

 <gui>Include a Delete command that bypasses Trash</gui>

Selecting this option will add a Delete item to the menu that pops up when you right-click on an item in the Files application.

Deleting an item using the Delete menu option bypasses the Trash altogether. The item is removed from the system completely. There is no way to recover the deleted item.
usr/share/help-langpack/hr/ubuntu-help/backup-frequency.page0000644000373100047300000000375712701706774026075 0ustar langpacklangpack00000000000000 Learn how often you should backup your important files to make sure that they're safe. Tiffany Antopolski tiffany.antopolski@gmail.com GNOME Documentation Project gnome-doc-list@gnome.org Frequency of backups

How often you make backups will depend on the type of data to be backed up. For example, if you are running a network environment with critical data stored on your servers, then even nightly backups may not be enough.

On the other hand, if you are backing up the data on your home computer then hourly backups would likely be unnecessary. You may find it helpful to consider the following points when planning your backup schedule:

The amount of time you spend on the computer.

How often and by how much the data on the computer changes.

If the data you want to back up is lower priority, or subject to few changes, like music, e-mails and family photos, then weekly or even monthly backups may suffice. However, if you happen to be in the middle of a tax audit, more frequent backups may be necessary.

As a general rule, the amount of time in between backups should be no more than the amount of time you are willing to spend re-doing any lost work. For example, if spending a week re-writing lost documents is too long for you, you should back up at least once per week.

 usr/share/help-langpack/hr/ubuntu-help/printing-envelopes.page0000644000373100047300000000427212701706767026454 0ustar langpacklangpack00000000000000 Make sure that you have the envelope/label the right way up, and have chosen the correct paper size. Phil Bull philbull@gmail.com Jim Campbell jwcampbell@gmail.com Print envelopes and labels

Most printers will allow you to print directly onto an envelope or sheet of labels. This is especially useful if you have a lot of letters to send, for example.

Printing onto envelopes

There are two things you need to check when trying to print onto an envelope. The first is that your printer knows what size the envelope is. After you click Print and the Print window appears, go to the Page Setup tab and choose the Paper type as "Envelope" if you can. If you can't do this, see if you can change the Paper size to an envelope size (e.g. "C5"). The pack of envelopes will say what size they are; most envelopes come in standard sizes.

Secondly, you need to make sure that the envelopes are loaded with the right side up in the printer's in-tray. Check the printer's manual for this, or try to print a single envelope and check which side is printed on to see which way is the right way up.

Some printers are not designed to be able to print envelopes, especially some laser printers. Check your printer's manual to see if it accepts envelopes; otherwise, you could damage the printer by feeding an envelope in.
usr/share/help-langpack/hr/ubuntu-help/files-autorun.page0000644000373100047300000001275012701706772025415 0ustar langpacklangpack00000000000000 Automatically run applications for CDs and DVDs, cameras, audio players, and other devices and media. GNOME Documentation Project gnome-doc-list@gnome.org Michael Hill mdhillca@gmail.com Open applications for devices or discs

You can have an application automatically start when you plug in a device or insert a disc or media card. For example, you might want your photo organizer to start when you plug in a digital camera. You can also turn this off, so that nothing happens when you plug something in.

To decide which applications should start when you plug in various devices:

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Select DetailsRemovable Media.

Find your desired device or media type, and then choose an application or action for that media type. See below for a description of the different types of devices and media.

Instead of starting an application, you can also set it so that the device will be shown in the file manager. When that happens, you will be asked what to do, or nothing will happen automatically.

The Software option is slightly different from the others - if the computer detects that there is software on a disk that you inserted, it can try to automatically run the software if you like. This is good if you have an application installed on a CD and want it to start when the disc is inserted (for example, a slideshow).

If you don't see the device or media type that you want to change in the list (such as Blu-ray discs or E-book readers), click Other Media to see a more detailed list of devices. Select the type of device or media from the Type drop-down and the application or action from the Action drop-down.

If you don't want any applications to be opened automatically, whatever you plug in, select Never prompt or start programs on media insertion at the bottom of the Removable Media window.
Types of devices and media Audio discs

Choose your favorite music application or CD audio extractor to handle audio CDs. If you use audio DVDs (DVD-A), select how to open them under Other Media. If you open an audio disc with the file manager, the tracks will appear as WAV files that you can play in any audio player application.

 Video discs

Choose your favorite video application to handle video DVDs. Use the Other Media button to set an application for Blu-ray, HD DVD, video CD (VCD), and super video CD (SVCD). If DVDs or other video discs do not work correctly when you insert them, see .

Blank discs

Use the Other Media button to select a disc-writing application for blank CDs, blank DVDs, blank Blu-ray discs, and blank HD DVDs.

 Cameras and photos

Use the Photos drop-down to choose a photo-management application to run when you plug in your digital camera, or when you insert a media card from a camera, such as a CF, SD, MMC, or MS card. You can also simply browse your photos using the file manager.

Under Other Media, you can select an application to open Kodak picture CDs, such as those you might have made in a store. These are regular data CDs with JPEG images in a folder called PICTURES.

 Music players

Choose an application to manage the music library on your portable music player, or manage the files yourself using the file manager.

 E-book readers

Use the Other Media button to choose an application to manage the books on your e-book reader, or manage the files yourself using the file manager.

 Software

Some discs and removable media contain software that is supposed to be run automatically when the media is inserted. Use the Software option to control what to do when media with autorun software is inserted. You will always be prompted for a confirmation before software is run.

Never run software from media you don't trust.
usr/share/help-langpack/hr/ubuntu-help/contacts-setup.page0000644000373100047300000000264412701706770025573 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Store your contacts in a local address book or in an online account. Starting Contacts for the first time

When you run Contacts for the first time, the Contacts Setup window opens.

If you have online accounts configured, they are listed with Local Address Book. Select an item from the list and click Select.

Click the Online Account Settings to edit existing account settings.

If you have no online accounts configured, click Online Accounts to begin the setup. If you don't wish to set up online accounts at this time, click Local Address Book.

 usr/share/help-langpack/hr/ubuntu-help/documents-tracker.page0000644000373100047300000000230212701706772026242 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 Local or remote documents do not appear. My documents cannot be seen

If your documents fail to display in Documents, Tracker may not be running or properly configured. Make sure Tracker is running in your session. The default configuration, set to index files in your home directory (non-recursively) and XDG folders (recursively), should be adequate. Ensure that your documents are in one of these paths.

 usr/share/help-langpack/hr/ubuntu-help/addremove-install.page0000644000373100047300000000455712701706767026244 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Use Software to add programs and make Ubuntu more useful. Install additional software

The Ubuntu development team has chosen a default set of applications that we think makes Ubuntu very useful for most day-to-day tasks. However, you will certainly want to install more software to make Ubuntu more useful to you.

To install additional software, complete the following steps:

Connect to the Internet using a wireless or wired connection.

Click the Software icon in the Launcher, or search for Software in the Dash.

When Software launches, search for an application, or select a category and find an application from the list.

Select the application that you are interested in and click Install.

You will be asked to enter your password. Once you have done that the installation will begin.

The installation usually finishes quickly, but could take a while if you have a slow Internet connection.

A shortcut to your new app will be added to the Launcher. To disable this feature, uncheck ViewNew Applications in Launcher.

usr/share/help-langpack/hr/ubuntu-help/music-player-notrecognized.page0000644000373100047300000000446012701706774030103 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Add a .is_audio_player file to tell your computer that it's an audio player. Why isn't my audio player recognized when I plug it in?

If your audio player (MP3 player etc.) is plugged in to the computer but you can't see it in your music organizer application, it may not have been properly recognized as an audio player.

Try unplugging the player and then plugging it in again. If that doesn't help, open the file manager. You should see the player listed under Devices in the sidebar - click it to open the folder for the audio player. Now, click FileNew DocumentEmpty Document, type .is_audio_player and press Enter (the period and underscores are important, and it should be all lower-case). This file tells your computer to recognize the device as an audio player.

Now, find the audio player in the file manager sidebar and eject it (right-click and click Eject). Unplug it, then plug it back in. This time it should have been recognized as an audio player by your music organizer. If not, try closing the music organizer and then re-opening it.

These instructions won't work for iPods and some other audio players. They should work if your player is a USB Mass Storage device, though; it should say in its manual if it is.

When you look in the audio player folder again, you won't see the .is_audio_player file. This is because the period in the file's name tells the file manager to hide the file. You can check that it is still there by clicking ViewShow Hidden Files.

 usr/share/help-langpack/hr/ubuntu-help/bluetooth-turn-on-off.page0000644000373100047300000000445612701706772027001 0ustar langpacklangpack00000000000000 Enable or disable the Bluetooth device on your computer. Jim Campbell jwcampbell@gmail.com Shaun McCance shaunm@gnome.org Ubuntu Documentation Team Turn Bluetooth on or off

The Bluetooth icon in the menu bar

You can turn Bluetooth on to use Bluetooth devices and send and receive files, but turn it off to conserve power. To turn Bluetooth on, click the Bluetooth icon on the top bar and switch Bluetooth on.

Many laptop computers have a hardware switch or key combination to turn Bluetooth on and off. If the Bluetooth hardware is turned off, you will not see a Bluetooth icon in the menu bar. Look for a switch on your computer or a key on your keyboard. The keyboard key is often accessed with the help of the Fn key.

Many laptop computers have a hardware switch or key combination to turn Bluetooth on and off. If the Bluetooth hardware is turned off, you will not see a Bluetooth icon in the top bar. Look for a switch on your computer or a key on your keyboard. The keyboard key is often accessed with the help of the Fn key.

To turn Bluetooth off, click the Bluetooth icon and switch Bluetooth off.

You only need to switch Visible on if you are connecting to this computer from another device. See for more information.

 usr/share/help-langpack/hr/ubuntu-help/mouse-middleclick.page0000644000373100047300000000703112701706767026212 0ustar langpacklangpack00000000000000 Use the middle mouse button to open applications, paste text, open tabs, and more. Tiffany Antopolski tiffany.antopolski@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Middle-click

Many mice and some touchpads have a middle mouse button. On a mouse with a scroll wheel, you can usually press directly down on the scroll wheel to middle-click. If you don't have a middle mouse button, you can press the left and right mouse buttons at the same time to middle-click. If you find you are unable to middle-click this way you can try following these instructions.

On touchpads that support multi-finger taps, you can tap with three fingers at once to middle-click. You have to enable tap clicking in the touchpad settings for this to work.

Many applications use middle-click for advanced click shortcuts.

One common shortcut is to paste selected text. (This is sometimes called primary selection paste.) Select the text you want to paste, then go to where you want to paste it and middle-click. The selected text is pasted at the mouse position.

Pasting text with your middle mouse button is completely separate from the normal clipboard. Selecting text does not copy it to your clipboard. This quick method of pasting only works with the middle mouse button.

On scrollbars and sliders, a regular click in the empty space moves by a set amount (such as one page) in the direction you clicked. You can also middle-click in the empty space to move to exactly the location you clicked.

You can quickly open a new window for an application with middle-click. Simply middle-click on the application's icon, either in the Launcher on the left, or in the Dash.

Most web browsers allow you to open links in tabs quickly with the middle mouse button. Just click any link with your middle mouse button, and it will open in a new tab. Be careful clicking the link in the Firefox web browser, though. In Firefox, if you middle-click anywhere except on a link, it will try to load your selected text as a URL, as if you used middle-click to paste it to the location bar and pressed Enter.

In the file manager, middle-click serves two roles. If you middle-click a folder, it will open in a new tab. This mimics the behavior of popular web browsers. If you middle-click a file, it will open the file, just as if you had double-clicked.

Some specialized applications allow you to use the middle mouse button for other functions. Search your application's help for middle-click or middle mouse button.

 usr/share/help-langpack/hr/ubuntu-help/mouse-lefthanded.page0000644000373100047300000000267012701706767026050 0ustar langpacklangpack00000000000000 Reverse the left and right mouse buttons in the mouse settings. Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Use your mouse left-handed

You can swap the behavior of the left and right buttons on your mouse or touchpad to make it more comfortable for left-handed use.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Mouse & Touchpad.

In the General section, switch Primary button to Right.

This setting will affect both your mouse and touchpad, as well as any other pointing device.

 usr/share/help-langpack/hr/ubuntu-help/files-open.page0000644000373100047300000000635412701706770024662 0ustar langpacklangpack00000000000000 Open files using an application that isn't the default one for that type of file. You can change the default too. Cristopher Thomas crisnoh@gmail.com Shaun McCance shaunm@gnome.org Open files with other applications

When you double-click a file in the file manager, it will be opened with the default application for that file type. You can open it in a different application, search online for applications, or set the default application for all files of the same type.

To open a file with an application other than the default, right-click the file and select the application you want from the top of the menu. If you don't see the application you want, click Open With Other Application. By default, the file manager only shows applications it knows can handle the file. To look through all the applications on your computer, click Show other applications.

If you still can't find the application you want, you can search for more applications by clicking Find applications online. The file manager will search online for packages containing applications that are known to handle files of that type.

Change the default application

You can change the default application that is used to open files of a given type. This will allow you to open your preferred application when you double-click to open a file. For example, you might want your favorite music player to open when you double-click an MP3 file.

Select a file of the type whose default application you want to change. For example, to change which application is used to open MP3 files, select a .mp3 file.

Right-click the file and select Properties.

Select the Open With tab.

Select the application you want and click Set as default. By default, the file manager only shows applications it knows can handle the file. To look through all the applications on your computer, click Show other applications.

If Other Applications contains an application you sometimes want to use, but don't want to make the default, select that application and click Add. This will add it to Recommended Applications. You will then be able to use this application by right-clicking the file and selecting it from the list.

This changes the default application not just for the selected file, but for all files with the same type.

 usr/share/help-langpack/hr/ubuntu-help/media.page0000644000373100047300000000306112701706772023672 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Digital cameras, iPods, playing videos… Sound, video & pictures
Sound Sound Sound Volume, speakers and headphones, microphones… Basic sound
Music and players Music and portable audio players
Photos Photos and digital cameras
Videos Videos and video cameras
usr/share/help-langpack/hr/ubuntu-help/keyboard.page0000644000373100047300000000231212701706772024411 0ustar langpacklangpack00000000000000 Input sources, cursor blinking, super key, keyboard accessibility… Shaun McCance shaunm@gnome.org Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Keyboard Region & Language Universal access Other topics usr/share/help-langpack/hr/ubuntu-help/color-howtoimport.page0000644000373100047300000000302412701706774026323 0ustar langpacklangpack00000000000000 Color profiles can be imported by opening them. Richard Hughes richard@hughsie.com Michael Hill mdhillca@gmail.com How do I import color profiles?

The profile can be imported by double clicking on the .ICC or .ICM file in the file browser.

Alternatively you can select Import profile… from System SettingsColor when selecting a profile for a device.

Alternatively you can select Import profile… from System SettingsColor when selecting a profile for a device.

usr/share/help-langpack/hr/ubuntu-help/unity-dash-music.page0000644000373100047300000000264512701706770026023 0ustar langpacklangpack00000000000000 Find and play music from your computer or the internet. Jeremy Bicha jbicha@ubuntu.com Music lens

The music lens is the fourth lens after the Dash home in the lens bar and is represented by a music note. The music lens gives you access to your music or music available online.

You can use SuperM to open the Dash directly at the music lens.

Previews

Right click on a search result to open a preview. The preview shows the cover art and the tracks.

Click the track number to play the song right from the preview. Click the track number again to pause the song.

Filters

Click Filter results to filter by decade or genre.

 usr/share/help-langpack/hr/ubuntu-help/hardware.page0000644000373100047300000000235412701706775024417 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Hardware Hardware problems, printers, power settings, color management, Bluetooth, disks… Hardware & drivers More topics
Problems Hardware problems Common problems
usr/share/help-langpack/hr/ubuntu-help/accounts.page0000644000373100047300000000223512701706772024434 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Greg Beam ki7mt@yahoo.com Add accounts, Remove accounts, Disable services Online accounts

You can enter your login details for online services, such as Google and Facebook, into the Online Accounts application. This will let you access your calendar, mail, chat accounts, and similar applications without having to enter your account details again.

usr/share/help-langpack/hr/ubuntu-help/net-default-browser.page0000644000373100047300000000340012701706771026500 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com Change the default web browser by going to Details in the System Settings. Change which web browser websites are opened in

When you click a link to a web page in any application, a web browser will automatically open up to that page. If you have more than one browser installed, however, the page may not open up in the browser you wanted it to open in. To fix this, change the default web browser:

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Details and choose Default Applications from the list on the left side of the window.

Choose which web browser you would like links to be opened in by changing the Web option.

When you open up a different web browser, it might tell you that it's not the default browser any more. If this happens, click the Cancel button (or similar) so that it doesn't try to set itself as the default browser again.

 usr/share/help-langpack/hr/ubuntu-help/user-changepicture.page0000644000373100047300000000301312701706771026404 0ustar langpacklangpack00000000000000 Add your photo to the login and user screens. GNOME Documentation Project gnome-doc-list@gnome.org Shaun McCance shaunm@gnome.org Change your login screen photo

When you log in or switch users, you will see a list of users with their login photos. You can change your photo to a stock image or an image of your own. You can even take a new login photo with your webcam.

Click the icon at the far right of the menu bar and select System Settings.

Open User Accounts.

Click the picture next to your name. A drop-down gallery will be shown with some stock login photos. If you like one of them, click it to use it for yourself.

If you'd rather use a picture you already have on your computer, click Browse for more pictures.

 usr/share/help-langpack/hr/ubuntu-help/backup-thinkabout.page0000644000373100047300000000602312701706772026227 0ustar langpacklangpack00000000000000 A list of folders where you can find documents, files and settings that you may want to back up. Tiffany Antopolski tiffany.antopolski@gmail.com GNOME Documentation Project gnome-doc-list@gnome.org Michael Hill mdhillca@gmail.com Where can I find the files I want to back up?

Listed below are the most common locations of important files and settings that you may want to back up.

Personal files (documents, music, photos and videos)

These are usually stored in your home folder (/home/your_name). They could be in subfolders such as Desktop, Documents, Pictures, Music, and Videos.

If your backup medium has sufficient space (if it's an external hard disk, for example), consider backing up the entire Home folder. You can find out how much disk space your Home folder takes up by using the Disk Usage Analyzer.

Hidden files

Any file or folder name that starts with a period (.) is hidden by default. To view hidden files, click ViewShow Hidden Files or press CtrlH. You can copy these to a backup location like any other file.

Personal settings (desktop preferences, themes, and software settings)

Most applications store their settings in hidden folders inside your Home folder (see above for information on hidden files).

Most of your application settings will be stored in the hidden folders .config, .gconf, .gnome2, and .local in your Home folder.

System-wide settings

Settings for important parts of the system aren't stored in your Home folder. There are a number of locations that they could be stored, but most are stored in the /etc folder. In general, you won't need to back up these files on a home computer. If you are running a server, however, you should back up the files for the services that it is running.

 usr/share/help-langpack/hr/ubuntu-help/clock.page0000644000373100047300000000136712701706771023714 0ustar langpacklangpack00000000000000 Set time and date, timezone, calendar and appointments… Shaun McCance shaunm@gnome.org Time & date usr/share/help-langpack/hr/ubuntu-help/net-browser.page0000644000373100047300000000151512701706770025062 0ustar langpacklangpack00000000000000 Change the default browser, install Flash, install the java plugin, Silverlight support… The Ubuntu Documentation Team Web Browsers usr/share/help-langpack/hr/ubuntu-help/net-slow.page0000644000373100047300000000657712701706770024400 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Other things might be downloading, you could have a poor connection, or it could be a busy time of day. The internet seems slow

If you are using the internet and it seems slow, there are a number of things that could be causing the slow down.

Try closing your web browser and then re-opening it, and disconnecting from the internet and then reconnecting again. (Doing this resets a lot of things that might be causing the internet to run slowly.)

Busy time of day

Internet service providers commonly setup internet connections so that they are shared between several households. Even though you connect separately, through your own phone line or cable connection, the connection to the rest of the internet at the telephone exchange might actually be shared. If this is the case and lots of your neighbors are using the internet at the same time as you, you might notice a slow-down. You're most likely to experience this at times when your neighbors are probably on the internet (in the evenings, for example).

Downloading lots of things at once

If you or someone else using your internet connection are downloading several files at once, or watching videos, the internet connection might not be fast enough to keep up with the demand. In this case, it will feel slower.

Unreliable connection

Some internet connections are just unreliable, especially temporary ones or those in high demand areas. If you are in a busy coffee shop or a conference center, the internet connection might be too busy or simply unreliable.

Low wireless connection signal

If you're connected to the internet by wireless (wifi), check the network menu on the menu bar to see if you have good wireless signal. If not, the internet may be slow because you don't have a very strong signal.

Using a slower mobile internet connection

If you have a mobile internet connection and notice that it is slow, you may have moved into an area where signal reception is poor. When this happens, the internet connection will automatically switch from a fast "mobile broadband" connection like 3G to a more reliable, but slower, connection like GPRS.

Web browser has a problem

Sometimes web browsers encounter a problem that makes them run slow. This could be for any number of reasons - you could have visited a website that the browser struggled to load, or you might have had the browser open for a long time, for example. Try closing all of the browser's windows and then opening the browser again to see if this makes a difference.

 usr/share/help-langpack/hr/ubuntu-help/documents-collections.page0000644000373100047300000000424712701706767027143 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 Group related documents in a collection. Make collections of documents

Documents lets you put together documents of different types in one place called a collection. If you have documents that are related, you can group them to make them easier to find. For example, if you had a business trip where you made a presentation, your slides, your flight itinerary (a PDF file), your budget spreadsheet, and other hybrid PDF/ODF documents, can be grouped in one collection.

To create or add to a collection:

Click the ✓ button.

In selection mode, check the documents to be collected.

Click the + button in the button bar.

In the collection list, click Add and type a new collection name, or select an existing collection. The selected documents will be added to the collection.

Collections do not behave like folders and their hierarchy: you cannot put collections inside collections.

To delete a collection:

Click the ✓ button.

In selection mode, check the collection to be deleted.

Click the Trash button in the button bar. The collection will be deleted, leaving the original documents.

 usr/share/help-langpack/hr/ubuntu-help/unity-dash-photos.page0000644000373100047300000000301312701706767026213 0ustar langpacklangpack00000000000000 View photos from your computer or your online social media accounts. Jeremy Bicha jbicha@ubuntu.com Photos lens

The photos lens is the fifth lens after the Dash home in the lens bar and is represented by a camera. The photos lens gives you access to photos on your computer or from Online Accounts such as Facebook or Google Picasa.

You can use SuperC to open the Dash directly at the photos lens.

Previews

Right click on a search result to open a preview with more information about the photo and a larger thumbnail.

For photos stored on your computer, you can open, print, view, or email them.

Filters

Click Filter results to filter by date the photo was taken or the source.

 usr/share/help-langpack/hr/ubuntu-help/a11y-screen-reader.page0000644000373100047300000000167112701706773026111 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Use the Orca screen reader to speak the user interface. Read screen aloud

GNOME provides the Orca screen reader to speak the user interface. Depending on how you installed GNOME, you might not have Orca installed. Install Orca, and then refer to the Orca Help for more information.

usr/share/help-langpack/hr/ubuntu-help/power-suspendfail.page0000644000373100047300000000776612701706773026303 0ustar langpacklangpack00000000000000 Some computer hardware causes problems with suspend or hibernate. GNOME Documentation Project gnome-doc-list@gnome.org Ekaterina Gerasimova kittykat3756@gmail.com Why won't my computer turn back on after I suspended it?

If you suspend or hibernate your computer, then try to resume it or turn it back on, you may find that it does not work as you expected. This could be because suspend and hibernate aren't supported properly by your hardware.

My computer is suspended and isn't resuming

If you suspend your computer and then press a key or click the mouse, it should wake up and display a screen asking for your password. If this doesn't happen, try pressing the power button (don't hold it in, just press it once).

If this still doesn't help, make sure that your computer's monitor is switched on and try pressing a key on the keyboard again.

As a last resort, turn off the computer by holding in the power button for 5-10 seconds, although you will lose any unsaved work by doing this. You should then be able to turn on the computer again.

If this happens every time you suspend your computer, the suspend feature may not work with your hardware.

If your computer loses power and doesn't have an alternative power supply (such as a working battery), it will switch off.
None of my applications/documents are open when I turn on the computer again

If you hibernated your computer and switched it on again, but none of your documents or applications are open, it probably failed to hibernate properly. Sometimes this happens because of a minor problem, and the computer will be able to hibernate properly the next time you do it. It might also happen because you had installed a software update which required the computer to be restarted; in this case, the computer may have shut down instead of hibernating.

It is also possible that the computer is not capable of hibernating because the hardware doesn't support it properly. This might be because of a problem with Linux drivers for your hardware, for example. You can test this by hibernating again and seeing if it works the second time. If it doesn't, it is probably a problem with your computer's drivers.

My wireless connection (or other hardware) doesn't work when I wake up my computer

If you suspend or hibernate your computer and then resume it again, you may find that your internet connection, mouse, or some other device doesn't work properly. This could be because the device's driver doesn't properly support suspend or hibernate. This is a problem with the driver and not the device itself.

If the device has a power switch, try turning it off and then on again. In most cases, the device will start working again. If it connects via a USB cable or similar, unplug the device and then plug it in again and see if it works.

If you cannot turn off/unplug the device, or if this does not work, you may need to restart your computer for the device to start working again.

 usr/share/help-langpack/hr/ubuntu-help/files-tilde.page0000644000373100047300000000316112701706773025016 0ustar langpacklangpack00000000000000 These are backup files. They are hidden by default. Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com What is a file with a "~" at the end of its name?

Files with a "~" at the end of their names (for example, example.txt~) are automatically created backup copies of documents edited in the gedit text editor or other applications. It is safe to delete them, but there's no harm to leave them on your computer.

These files are hidden by default. If you are seeing them, that is because you either selected Show Hidden Files (in the down menu of the Files toolbar) or pressed CtrlH. You can hide them again by repeating either of these steps.

These files are treated in the same way as normal hidden files. See for advice on dealing with hidden files.

 usr/share/help-langpack/hr/ubuntu-help/user-changepassword.page0000644000373100047300000000613112701706771026577 0ustar langpacklangpack00000000000000 Keep your account secure by changing your password often in your account settings. GNOME Documentation Project gnome-doc-list@gnome.org Change your password

It is a good idea to change your password from time to time, especially if you think someone else knows what your password is.

Click the icon at the far right of the menu bar and select System Settings.

Open User Accounts.

Click the label next to Password.

The label should look like a series of dots or boxes if you already have a password set.

Enter your current password, then a new password. Enter your new password again in the Confirm password field.

You can also click the button next to the New password field to select a randomly generated secure password. These passwords are hard for others to guess, but they can be hard to remember, so be careful.

Click Change.

Make sure you choose a good password. This will help to keep your user account safe.

Change the keyring password

If you change your login password, it may become out of sync with the keyring password. The keyring keeps you from having to remember lots of different passwords by just requiring one master password to access them all. If you change your user password (see above), your keyring password will remain the same as your old password. To change the keyring password (to match your login password):

Open the Passwords and Keys application from the Dash.

In the View menu, ensure By keyring is checked.

In the sidebar under Passwords, right-click on Login keyring and select Change Password.

Enter your Old Password, followed by your new Password, and Confirm your new password by entering it again.

Click OK.
usr/share/help-langpack/hr/ubuntu-help/get-involved.page0000644000373100047300000000252112701706767025222 0ustar langpacklangpack00000000000000 How and where to report problems with these help topics. Tiffany Antopolski tiffany@antopolski.com Participate to improve this guide

This help system is created by a volunteer community. You are welcome to participate. If you notice a problem with these help pages (like typos, incorrect instructions or topics that should be covered but aren't), you can file a bug report.

To file a bug, press AltF2 and type ubuntu-bug ubuntu-docs. Press Enter to begin the bug collection process.

See the Ubuntu bug reporting instructions for more information about how to file your bug.

Thanks for helping make the Ubuntu Help better!

 usr/share/help-langpack/hr/ubuntu-help/net-problem.page0000644000373100047300000000134412701706774025043 0ustar langpacklangpack00000000000000 Troubleshooting wireless connections, finding your wifi network… The Ubuntu Documentation Team Network problems usr/share/help-langpack/hr/ubuntu-help/net-wireless-troubleshooting-initial-check.page0000644000373100047300000000602512701706776033172 0ustar langpacklangpack00000000000000 Contributors to the Ubuntu documentation wiki GNOME Documentation Project gnome-doc-list@gnome.org Make sure that simple network settings are correct and prepare for the next few troubleshooting steps. Wireless network troubleshooter Perform an initial connection check

In this step you will check some basic information about your wireless network connection. This is to make sure that your networking problem isn't caused by a relatively simple issue, like the wireless connection being turned off, and to prepare for the next few troubleshooting steps.

Make sure that your laptop is not connected to a wired internet connection.

If you have an external wireless adapter (such as a USB adapter, or a PCMCIA card that plugs into your laptop), make sure that it is firmly inserted into the proper slot on your computer.

If your wireless card is inside your computer, make sure that the wireless switch is turned on (if it has one). Laptops often have wireless switches that you can toggle by pressing a combination of keyboard keys.

Click the network menu on the menu bar and make sure that the Enable Wireless setting is checked.

Open the Terminal, type nm-tool and press Enter.

This will display information about your network hardware and connection status. Look down the list of information and see if there is a section related to the wireless network adapter. The information for each network device is separated by a row of dashes. If you find the line State: connected in the section for your wireless adapter, it means that it is working and connected to your wireless router.

If you are connected to your wireless router, but you still cannot access the internet, your router may not be set up correctly, or your Internet Service Provider (ISP) maybe experiencing some technical problems. Review your router and ISP setup guides to make sure the settings are correct, or contact your ISP for support.

If the information from nm-tool did not indicate that you were connected to the network, click Next to proceed to the next portion of the troubleshooting guide.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless-troubleshooting-hardware-check.page0000644000373100047300000001523512701706771033334 0ustar langpacklangpack00000000000000 Contributors to the Ubuntu documentation wiki GNOME Documentation Project gnome-doc-list@gnome.org Even though your wireless adapter is connected, it may not have been recognized properly by the computer. Wireless connection troubleshooter Check that the wireless adapter was recognized

Even though the wireless adapter is connected to the computer, it may not have been recognized as a network device by the computer. In this step, you will check whether the device was recognized properly.

Open a Terminal window, type sudo lshw -C network and press Enter. If this gives an error message, you can install the lshw program on your computer by typing sudo apt-get install lshw into the terminal.

Look through the information that appeared and find the Wireless interface section. If your wireless adapter was detected properly, you should see something similar (but not identical) to this:

If a wireless device is listed, continue on to the Device Drivers step.

If a wireless device is not listed, the next steps you take will depend on the type of device that you use. Refer to the section below that is relevant to the type of wireless adapter that your computer has (internal PCI, USB, or PCMCIA).
PCI (internal) wireless adapter

Internal PCI adapters are the most common, and are found in most laptops made within the past few years. To check if your PCI wireless adapter was recognized:

Open a Terminal, type lspci and press Enter.

Look through the list of devices that is shown and find any that are marked Network controller or Ethernet controller. Several devices may be marked in this way; the one corresponding to your wireless adapter might include words like wireless, WLAN, wifi or 802.11. Here is an example of what the entry might look like:

Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection

If you found your wireless adapter in the list, proceed to the Device Drivers step. If you didn't find anything related to your wireless adapter, see the instructions below.
USB wireless adapter

Wireless adapters that plug into a USB port on your computer are less common. They can plug directly into a USB port, or may be connected by a USB cable. 3G/mobile broadband adapters look quite similar to wireless (wifi) adapters, so if you think you have a USB wireless adapter, double-check that it is not actually a 3G adapter. To check if your USB wireless adapter was recognized:

Open a Terminal, type lsusb and press Enter.

Look through the list of devices that is shown and find any that seem to refer to a wireless or network device. The one corresponding to your wireless adapter might include words like wireless, WLAN, wifi or 802.11. Here is an example of what the entry might look like:

If you found your wireless adapter in the list, proceed to the Device Drivers step. If you didn't find anything related to your wireless adapter, see the instructions below.
Checking for a PCMCIA device

PCMCIA wireless adapters are typically rectangular cards which slot into the side of your laptop. They are more commonly found in older computers. To check if your PCMCIA adapter was recognized:

Start your computer without the wireless adapter plugged in.

Open a Terminal and type the following, then press Enter:

tail -f /var/log/dmesg

This will display a list of messages related to your computer's hardware, and will automatically update if anything to do with your hardware changes.

Insert your wireless adapter into the PCMCIA slot and see what changes in the Terminal window. The changes should include some information about your wireless adapter. Look through them and see if you can identify it.

To stop the command from running in the Terminal, press CtrlC. After you have done that, you can close the Terminal if you like.

If you found any information about your wireless adapter, proceed to the Device Drivers step. If you didn't find anything related to your wireless adapter, see the instructions below.
Wireless adapter was not recognized

If your wireless adapter was not recognized, it might not be working properly or the correct drivers may not be installed for it.

To get specific help, look at the support options on your distribution's website. These might include mailing lists and web chats where you can ask about your wireless adapter, for example.

 usr/share/help-langpack/hr/ubuntu-help/sound-usespeakers.page0000644000373100047300000000502412701706773026275 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Connect speakers or headphones and select a default audio output device. Use different speakers or headphones

You can use external speakers or headphones with your computer. Speakers usually either connect using a circular TRS (tip, ring, sleeve) plug or with USB.

If your speakers or headphones have a TRS plug, plug it into the appropriate socket on your computer. Most computers have two sockets: one for microphones and one for speakers. Look for a picture of headphones next to the socket. Speakers or headphones plugged into a TRS socket will usually be used by default. If not, see the instructions below for selecting the default device.

Some computers support multi-channel output for surround sound. This usually uses multiple TRS jacks, which are often color-coded. If you are unsure which plugs go in which sockets, you can test the sound output in the sound settings. Click the sound menu on the menu bar then click Sound Settings. Select your speakers in the list of devices, then click Test Sound. In the pop-up window, click the button for each speaker. Each button will speak its position only to the channel corresponding to that speaker.

If you have USB speakers or headphones, or analog headphones plugged into a USB sound card, plug them into any USB port. USB speakers act as separate audio devices, and you may have to specify which speakers to use by default.

Select a default audio input device

Click the sound menu on the menu bar and select Sound Settings.

On the Output tab, select the device in the list of devices.

If you don't see your device on the Output tab, check the Hardware tab. Select your device and try different profiles.

 usr/share/help-langpack/hr/ubuntu-help/a11y-stickykeys.page0000644000373100047300000000667712701706775025611 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Type keyboard shortcuts one key at a time rather than having to hold down all of the keys at once. Turn on sticky keys

Sticky keys allows you to type keyboard shortcuts one key at a time rather than having to hold down all of the keys at once. For example, the AltTab shortcut switches between windows. Without sticky keys turned on, you would have to hold down both keys at the same time; with sticky keys turned on, you would press Alt and then Tab to do the same.

You might want to turn on sticky keys if you find it difficult to hold down several keys at once.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Otvorite Univerzalni pristup i odaberite Tipkanje tab.

Switch Sticky Keys on.

Quickly turn sticky keys on and off

Under Enable by Keyboard, select Turn on accessibility features from the keyboard to turn sticky keys on and off from the keyboard. When this option is selected, you can press Shift five times in a row to enable or disable sticky keys.

If you press two keys at once, you can have sticky keys turn itself off temporarily to let you enter a keyboard shortcut in the normal way.

For example, if you have sticky keys turned on but press Alt and Tab simultaneously, sticky keys would not wait for you to press another key if you had this option turned on. It would wait if you only pressed one key, however. This is useful if you are able to press some keyboard shortcuts simultaneously (for example, keys that are close together), but not others.

Select Disable if two keys are pressed together to enable this.

You can have the computer make a "beep" sound when you start typing a keyboard shortcut with sticky keys turned on. This is useful if you want to know that sticky keys is expecting a keyboard shortcut to be typed, so the next key press will be interpreted as part of a shortcut. Select Beep when a modifier key is pressed to enable this.

usr/share/help-langpack/hr/ubuntu-help/net-install-java-plugin.page0000644000373100047300000000146412701706773027266 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Help your browser work with websites that require Java. Install the Java browser plug-in

Some websites use small Java programs, which require a Java plugin to be installed in order to run.

Install the icedtea6-plugin package to view Java programs in your browser.

 usr/share/help-langpack/hr/ubuntu-help/net-wired.page0000644000373100047300000000127512701706773024517 0ustar langpacklangpack00000000000000 Wired internet connections, Fixed IP addresses… The Ubuntu Documentation Team Wired Networking usr/share/help-langpack/hr/ubuntu-help/prefs-language-install.page0000644000373100047300000000404212701706774027161 0ustar langpacklangpack00000000000000 Install more translations and related language support packages. Gunnar Hjalmarsson gunnarhj@ubuntu.com Install languages

When you install Ubuntu, the language you select at installation gets installed together with English, but you can add further languages.

Click the icon at the very right of the menu bar and select System Settings.

In the Personal section, click Language Support.

Click Install / Remove Languages.... The Installed Languages window lists all the available languages, with the currently installed languages checked.

Check the languages you want to install, and uncheck those currently installed languages you want to remove.

Click Apply Changes.

Administrative privileges are required. Enter your password, or the password for the requested administrator account.

In addition to the translations used to display menus and messages, with a new language may follow various language support components such as dictionaries for spell checking, fonts and input methods.

Some translations may be incomplete, and certain applications may not support your language at all.

 usr/share/help-langpack/hr/ubuntu-help/color-calibrationtargets.page0000644000373100047300000000250712701706775027617 0ustar langpacklangpack00000000000000 Calibration targets are needed to do scanner and camera profiling. Richard Hughes richard@hughsie.com Which target types are supported?

The following types of targets are supported:

CMP DigitalTarget

ColorChecker 24

ColorChecker DC

ColorChecker SG

i1 RGB Scan 14

LaserSoft DC Pro

QPcard 201

IT8.7/2

You can purchase targets from well-known vendors like KODAK, X-Rite and LaserSoft in various online shops.

Alternatively you can buy targets from Wolf Faust at a very fair price.

usr/share/help-langpack/hr/ubuntu-help/printing-cancel-job.page0000644000373100047300000000606612701706772026450 0ustar langpacklangpack00000000000000 Cancel a pending print job and remove it from the queue. Phil Bull philbull@gmail.com Jim Campbell jwcampbell@gmail.com Jana Svarova jana.svarova@gmail.com 2013 Cancel, pause or release a print job

You can cancel a pending print job and remove it from the queue in the printer settings.

Cancel a print job

If you accidentally started printing a document, you can cancel the print so that you do not need to waste any ink or paper.

How to cancel a print job:

Click the icon at the far right of the menu bar and select System Settings.

Click Printers.

Click the Show Jobs button on the right-hand side of the Printers dialog.

Cancel the print job by clicking the stop button on the play-pause-stop symbols.

If this does not cancel the print job like you expected, try holding down the Cancel button on your printer.

As a last resort, especially if you have a big print job with a lot of pages that won't cancel, remove the paper from the printer's paper input tray. The printer should realize that there is no paper and will stop printing. You can then try canceling the print job again, or try turning the printer off and then on again.

Be careful that you don't damage the printer when removing the paper, though - if you would have to pull hard on the paper to remove it, you should probably just leave it where it is.
Pause and release a print job

If you want to pause or release a print job, you can do so by going to the jobs dialog in the printer settings and click the appropriate button.

Click the icon at the far right of the menu bar and select System Settings.

Click Printers.

Click the Show Jobs button on the right-hand side of the Printers dialog and either pause or release the print job based on your needs.
usr/share/help-langpack/hr/ubuntu-help/disk-capacity.page0000644000373100047300000000641712701706771025347 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Michael Hill mdhillca@gmail.com Use Disk Usage Analyzer or System Monitor to check space and capacity. Check how much disk space is left

You can check how much disk space is left with Disk Usage Analyzer or System Monitor.

Check with Disk Usage Analyzer

To check the free disk space and disk capacity using Disk Usage Analyzer:

Open the Disk Usage Analyzer application from the Dash. The window will display the Total file system capacity and Total file system usage.

Open the Disks application from the Activities overview. The window will display the Total file system capacity and Total file system usage.

Click one of the toolbar buttons to choose to Scan Home, Scan filesystem, Scan a folder, or Scan a remote folder.

The information is displayed according to Folder, Usage, Size and Contents. See more details in Disk Usage Analyzer.

Check with System Monitor

To check the free disk space and disk capacity with System Monitor:

Open the System Monitor application from the Dash.

Open the System Monitor application from the Activities overview.

Select the File Systems tab to view the system's partitions and disk space usage. The information is displayed according to Total, Free, Available and Used.
What if the disk is too full?

If the disk is too full you should:

Delete files that aren't important or that you won't use anymore.

Make backups of the important files that you won't need for a while and delete them from the hard drive.
usr/share/help-langpack/hr/ubuntu-help/power-hibernate.page0000644000373100047300000000721512701706776025717 0ustar langpacklangpack00000000000000 Hibernate is disabled by default since it's not well supported. GNOME Documentation Project gnome-doc-list@gnome.org Ekaterina Gerasimova kittykat3756@gmail.com Jeremy Bicha jbicha@ubuntu.com How do I hibernate my computer?

When the computer hibernates, all of your applications and documents are stored and the computer completely switches off so it does not use any power, but the applications and documents will still be open when you switch on the computer again.

Unfortunately, hibernate doesn't work in many cases, which can cause you to lose data if you expect your documents and applications to re-open when you switch your computer back on. Therefore, hibernate is disabled by default.

Test if hibernate works Always save your work before hibernating

You should save all of your work before hibernating the computer, just in case something goes wrong and your open applications and documents cannot be recovered when you switch on the computer again.

You can use the command line to test if hibernate works on your computer.

Open the Terminal by pressing Ctrl Altt or by searching for terminal in the Dash.

Open the Terminal by searching for terminal in the Activities overview.

Type sudo pm-hibernate into the terminal and press Enter.

Enter your password when prompted.

After you computer turns off, switch it back on. Did your open applications re-open?

If hibernate doesn't work, check if your swap partition is at least as large as your available RAM.
Enable hibernate

If the hibernate test works, you can continue to use the sudo pm-hibernate command when you want to hibernate.

You can also enable the hibernate option in the menus. To do that, use your favorite text editor to create /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla. Add the following to the file and save:

[Re-enable hibernate by default in upower] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes [Re-enable hibernate by default in logind] Identity=unix-user:* Action=org.freedesktop.login1.hibernate;org.freedesktop.login1.hibernate-multiple-sessions ResultActive=yes
usr/share/help-langpack/hr/ubuntu-help/tips-specialchars.page0000644000373100047300000000567412701706772026245 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Ubuntu Documentation Team Type characters not found on your keyboard, including foreign alphabets, mathematical symbols, and dingbats. Enter special characters

You can enter and view thousands of characters from most of the world's writing systems, even those not found on your keyboard. This page lists some different ways you can enter special characters.

Methods to enter characters
Character map

GNOME comes with a character map application that allows you to browse all the characters in Unicode. Use the character map to find the character you want, and then copy and paste it to wherever you need it.

You can find Character Map in the Dash. For more information on the character map, see the Character Map Manual.

Code points

You can enter any Unicode character using only your keyboard with the numeric code point of the character. Every character is identified by a four-character code point. To find the code point for a character, find the character in the character map application and look in the status bar or the Character Details tab. The code point is the four characters after U+.

To enter a character by its code point, press CtrlShiftU, type the four-character code point, and press Enter. If you often use characters that you can't easily access with other methods, you might find it useful to memorize the code point for those characters so you can enter them quickly.

Input sources

You can make your keyboard behave like the keyboard for another language, regardless of the letters printed on the keys. You can even switch between different input sources using an icon in the menu bar. To learn how, see .

 usr/share/help-langpack/hr/ubuntu-help/color-whatisspace.page0000644000373100047300000000740312701706776026252 0ustar langpacklangpack00000000000000 A color space is a defined range of colors. Richard Hughes richard@hughsie.com What is a color space?

A color space is a defined range of colors. Well known color spaces include sRGB, AdobeRGB and ProPhotoRGB.

The human visual system is not a simple RGB sensor, but we can approximate how the eye responds with a CIE 1931 chromaticity diagram that shows the human visual response as a horse-shoe shape. You can see that in human vision there are many more shades of green detected than blue or red. With a trichromatic color space like RGB we represent the colors on the computer using three values, which restricts up to encoding a triangle of colors.

Using models such as a CIE 1931 chromaticity diagram is a huge simplification of the human visual system, and real gamuts are expressed as 3D hulls, rather than 2D projections. A 2D projection of a 3D shape can sometimes be misleading, so if you want to see the 3D hull, install gnome-color-manager and then run gcm-viewer.

sRGB, AdobeRGB and ProPhotoRGB represented by white triangles

First, looking at sRGB, which is the smallest space and can encode the least number of colors. It is an approximation of a 10 year old CRT display, and so most modern monitors can display more colors than this. sRGB is a least-common-denominator standard and is used in a large number of applications (including the Internet).

AdobeRGB is frequently used as an editing space. It can encode more colors than sRGB, which means you can change colors in a photograph without worrying too much that the most vivid colors are being clipped or the blacks crushed.

ProPhoto is the largest space available and is frequently used for document archival. It can encode nearly the whole range of colors detected by the human eye, and even encode colors that the eye cannot detect!

Now, if ProPhoto is clearly better, why don't we use it for everything? The answer is to do with quantization. If you only have 8 bits (256 levels) to encode each channel, then a larger range is going to have bigger steps between each value.

Bigger steps mean a larger error between the captured color and the stored color, and for some colors this is a big problem. It turns out that key colors, like skin colors are very important, and even small errors will make untrained viewers notice that something in a photograph looks wrong.

Of course, using a 16 bit image is going to leave many more steps and a much smaller quantization error, but this doubles the size of each image file. Most content in existence today is 8bpp, i.e. 8 bits-per-pixel.

Color management is a process for converting from one color space to another, where a color space can be a well known defined space like sRGB, or a custom space such as your monitor or printer profile.

usr/share/help-langpack/hr/ubuntu-help/color-testing.page0000644000373100047300000000405212701706770025403 0ustar langpacklangpack00000000000000 Richard Hughes richard@hughsie.com Testing color management isn't hard, and we even supply some test profiles. How do I test if color management is working correctly?

The effects of a color profile are sometimes subtle and it may be hard to see if anything much has changed.

In GNOME we ship several profiles for testing that make it very clear when the profiles are being applied:

Bluish Test: This will turn the screen blue and tests if the calibration curves are being sent to the display

ADOBEGAMMA-test: This will turn the screen pink and tests different features of a screen profile

FakeBRG: This will not change the screen, but will swap around the RGB channels to become BGR. This will make all the colors gradients look mostly correct, and there won't be much difference on the whole screen, but images will look very different in applications that support color management.

Add one of the test profiles to your display device using the System SettingsColor preferences.

Using these profiles you can clearly see when an application supports color management.

usr/share/help-langpack/hr/ubuntu-help/documents-formats.page0000644000373100047300000000166312701706776026277 0ustar langpacklangpack00000000000000 Michael Hill mdhill@src.gnome.org 2012 Documents displays a number of popular document types. Formats supported

Documents displays PDF, DVI, XPS, PostScript and the formats supported by Document Viewer (Evince), Microsoft Office, LibreOffice and Google Docs.

 usr/share/help-langpack/hr/ubuntu-help/net-wired-connect.page0000644000373100047300000000337612701706767026155 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org To set up most wired network connections, all you need to do is plug in a network cable. Connect to a wired (Ethernet) network

To set up most wired network connections, all you need to do is plug in a network cable. The network icon on the menu bar should pulse for a few seconds and then will change to a "socket" icon when you are connected.

If this does not happen, you should first of all make sure that your network cable is plugged in. One end of the cable should be plugged into the rectangular Ethernet (network) port on your computer, and the other end should be plugged into a switch, router, network wall socket or similar (depending on the network setup you have). Sometimes, a light beside the Ethernet port will indicate that it is plugged in and active.

You can't plug one computer directly into another one with a network cable (at least, not without some extra setting-up). To connect two computers, you should plug them both into a network hub, router or switch.

If you are still not connected, your network may not support automatic setup (DHCP). In this case you'll have to configure it manually.

 usr/share/help-langpack/hr/ubuntu-help/shell-exit.page0000644000373100047300000000704612701706770024676 0ustar langpacklangpack00000000000000 Learn how to leave your user account, by logging out, switching users, and so on. Shaun McCance shaunm@gnome.org Andre Klapper ak-47@gmx.net Alexandre Franke afranke@gnome.org Log out, power off, switch users

When you've finished using your computer, you can turn it off, suspend it (to save power), or leave it powered on and log out.

Log out or switch users

To let other users use your computer, you can either log out, or leave yourself logged in and just switch users. If you switch users, all of your applications will continue running, and everything will be where you left it when you log back in.

To log out or switch users, click the system menu at the very right of the menu bar and select the appropriate option.

Lock the screen

If you're leaving your computer for a short time, you should lock your screen to prevent other people from accessing your files or running applications. When you return, simply enter your password to log back in. If you don't lock your screen, it will lock automatically after a certain amount of time.

To lock your screen, click the system menu in the menu bar and select Lock Screen.

When your screen is locked, other users can log in to their own accounts by clicking Switch User on the password screen. You can switch back to your desktop when they are finished.

Suspend

To save power, suspend your computer when you aren't using it. If you use a laptop, Ubuntu suspends your computer automatically when you close the lid. This saves your state to your computer's memory and powers off most of the computer's functions. A very small amount of power is still used during suspend.

To suspend your computer manually, click the system menu in the menu bar and select Suspend.

Power off or restart

If you want to power off your computer entirely, or do a full restart, click the system menu and select Shut Down.

If there are other users logged in, you may not be allowed to power off or restart the computer, because this will end their sessions. If you are an administrative user, you may be asked for your password to power off.

 usr/share/help-langpack/hr/ubuntu-help/net-findip.page0000644000373100047300000000407212701706772024653 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Jim Campbell jwcampbell@gmail.com Michael Hill mdhillca@gmail.com Knowing your IP address can help you troubleshoot network problems. Find your IP address

Knowing your IP address can help you troubleshoot problems with your internet connection. You may be surprised to learn that you have two IP addresses: an IP address for your computer on the internal network and an IP address for your computer on the internet.

Find your internal (network) IP address

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Network and select Wired or Wireless from the list on the left, depending on which network connection you want to find the IP address for.

Your internal IP address will be displayed in the list of information.

 Find your external (internet) IP address

Visit whatismyipaddress.com.

The site will display your external IP address for you.

Depending on how your computer connects to the internet, these addresses may be the same.

 usr/share/help-langpack/hr/ubuntu-help/documents-viewgrid.page0000644000373100047300000000305712701706771026436 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 Greg Beam ki7mt@yahoo.com 2014 Change the way documents are displayed. View files in a list or grid

Documents and collections are presented in Grid format by default. To view in List format:

Go to the top bar and click Documents to display the app menu.

Click List from the View as section.

List view has columns displaying the document type and date modified, and whether it's stored locally, or in Google Docs or SkyDrive.

Click Grid in the app menu to return to the default format.

 usr/share/help-langpack/hr/ubuntu-help/backup-where.page0000644000373100047300000000440112701706774025171 0ustar langpacklangpack00000000000000 Advice on where to store your backups and what type of storage device to use. c GNOME Documentation Project gnome-doc-list@gnome.org Tiffany Antopolski tiffany.antopolski@gmail.com Where to store your backup

You should store backup copies of your files somewhere separate from your computer - on an external hard disk, for example. That way, if the computer breaks, the backup will still be intact. For maximum security, you shouldn't keep the backup in the same building as your computer. If there is a fire or theft, both copies of the data could be lost if they are kept together.

It is important to choose an appropriate backup medium, too. You need to store your backups on a device that has sufficient disk capacity for all of the backed-up files.

Local and remote storage options

USB memory key (low capacity)

Writable CDs or DVDs (low/medium capacity)

External hard disk (typically high capacity)

Internal disk drive (high capacity)

Network-connected drive (high capacity)

File/backup server (high capacity)

Online backup service (Amazon S3, for example; capacity depends on price)

Some of these options have sufficient capacity to allow for a backup of every file on your system, which is also known as a complete system backup.

 usr/share/help-langpack/hr/ubuntu-help/prefs-display.page0000644000373100047300000000127112701706774025400 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Background, size and rotation, brightness… Display & screen usr/share/help-langpack/hr/ubuntu-help/keyboard-osk.page0000644000373100047300000000270412701706774025212 0ustar langpacklangpack00000000000000 Jeremy Bicha jbicha@ubuntu.com Julita Inca yrazes@gmail.com Michael Hill mdhillca@gmail.com Use an on-screen keyboard to enter text by clicking buttons with the mouse. Use a screen keyboard

If you don't have a keyboard attached to your computer or prefer not to use it, you can turn on the screen keyboard to enter text.

Click the icon at the very right of the menu bar and select System Settings.

Otvorite Univerzalni pristup i odaberite Tipkanje tab.

Switch on Typing Assistant to show the screen keyboard.

 usr/share/help-langpack/hr/ubuntu-help/unity-launcher-change-autohide.page0000644000373100047300000000312712701706773030611 0ustar langpacklangpack00000000000000 Jeremy Bicha jbicha@ubuntu.com Show the Launcher only when you need it. Auto-hide the Launcher

You can hide the Launcher if you only want to see it when you move your mouse or touchpad pointer to either the left side or top left corner of the screen.

Click the system menu at the very right of the menu bar and select System Settings.

In the Personal section, click Appearance.

Switch to the Behavior tab.

Switch Auto-hide the Launcher on.

Select Left side or Top left corner to designate the reveal location for the Launcher.

To help prevent you from accidentally showing the Launcher, Ubuntu requires you to push a little bit harder with your mouse or touchpad pointer to make the Launcher show. You can adjust the force needed by setting the Reveal sensitivity lower or higher.

 usr/share/help-langpack/hr/ubuntu-help/shell-overview.page0000644000373100047300000000210012701706775025562 0ustar langpacklangpack00000000000000 Desktop Introduction, keyboard shortcuts, windows… GNOME Documentation Project gnome-doc-list@gnome.org Desktop, apps & windows
The Desktop
Applications and windows
usr/share/help-langpack/hr/ubuntu-help/unity-launcher-intro.page0000644000373100047300000000325412701706767026723 0ustar langpacklangpack00000000000000 The Launcher is at the left of your screen. Ubuntu Documentation Team Use the Launcher to start applications

Launcher icons

The Launcher is one of the key components of the Unity desktop. When you log in to your desktop, it will appear along the left-hand side of the screen. The Launcher provides you with quick access to applications, workspaces, removable devices and the trash.

If an application that you want to start using is present in the Launcher, you can click on that application's icon, and it will start up, ready for you to use.

To learn more about the Launcher, explore any of the Launcher help topics below.

Use the Launcher
Customize the Launcher
usr/share/help-langpack/hr/ubuntu-help/net-proxy.page0000644000373100047300000000502412701706770024557 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Baptiste Mille-Mathias baptistem@gnome.org Michael Hill mdhillca@gmail.com A proxy filters websites that you look at, usually for control or security purposes. Define proxy settings
What is a proxy?

A web proxy filters websites that you look at, it receipts requests from your web browser to fetches the web pages and their elements, and following a policy will decide to pass them you back. They are commonly used in businesses and at public wireless hotspots to control what websites you can look at, prevent you from accessing the internet without logging in, or to do security checks on websites.

Change proxy method

Click the icon at the very right of the menu bar and select System Settings.

Open Network and choose Network Proxy from the list on the left side of the window.

Choose which proxy method you want to use among the following methods.

None

The applications will use a direct connection to fetch the content on the web.

 Manual

For each proxied protocol, define the address of a proxy and port for the protocols. The protocols are HTTP, HTTPS, FTP and SOCKS.

 Automatic

An URL points to a resource, which contains the appropriate configuration for your system.

The proxy settings will be applied to applications that use network connection to use the chosen configuration.

 usr/share/help-langpack/hr/ubuntu-help/color-calibrate-printer.page0000644000373100047300000000326512701706767027350 0ustar langpacklangpack00000000000000 Calibrating your printer is important to print accurate colors. Richard Hughes richard@hughsie.com How do I calibrate my printer?

There are two ways to profile a printer device:

Using a photospectrometer device like the Pantone ColorMunki

Downloading a printing a reference file from a color company

Using a color company to generate a printer profile is usually the cheapest option if you only have one or two different paper types. By downloading the reference chart from the companies website you can then send them back the print in a padded envelope where they will scan the paper, generate the profile and email you back an accurate ICC profile.

Using an expensive device such as a ColorMunki works out cheaper only if you are profiling a large number of ink sets or paper types.

If you change your ink supplier, make sure you recalibrate the printer!

usr/share/help-langpack/hr/ubuntu-help/net-wireless-edit-connection.page0000644000373100047300000002173612701706770030323 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Phil Bull philbull@gmail.com Learn what the options on the wireless connection editing screen mean. Edit a wireless connection

This topic describes all of the options that are available when you edit a wireless network connection. To edit a connection, click the network menu in the menu bar and select Edit Connections.

Most networks will work fine if you leave these settings at their defaults, so you probably don't need to change any of them. Many of the options here are provided to give you greater control over more advanced networks.
Available to all users / Connect automatically <gui>Connect automatically</gui>

Check this option if you would like the computer to try to connect to this wireless network whenever it is in range.

If several networks which are set to connect automatically are in range, the computer will connect to the first one shown in the Wireless tab in the Network Connections window. It won't disconnect from one available network to connect to a different one that has just come in range.

 <gui>Available to all users</gui>

Check this if you would like all of the users on the computer to have access to this wireless network. If the network has a WEP/WPA password and you have checked this option, you will only need to enter the password once. All of the other users on your computer will be able to connect to the network without having to know the password themselves.

If this is checked, you need to be an administrator to change any of the settings for this network. You may be asked to enter your admin password.
Wireless <gui>SSID</gui>

This is the name of the wireless network you are connecting to, otherwise known as the Service Set Identifier. Don't change this unless you have changed the name of the wireless network (for example, by changing the settings of your wireless router or base station).

 <gui>Mode</gui>

Use this to specify whether you are connecting to an Infrastructure network (one where computers wirelessly connect to a central base station or router) or an Ad-hoc network (where there is no base station, and the computers in the network connect to one another). Most networks are infrastructure ones; you may wish to set-up your own ad-hoc network though.

If you choose Ad-hoc, you will see two other options, Band and Channel. These determine which wireless frequency band the ad-hoc wireless network will operate on. Some computers are only able to work on certain bands (for example, only A or only B/G), so you might want to pick a band that all of the computers in the ad-hoc network can use. In busy places, there might be several wireless networks sharing the same channel; this might slow-down your connection, so you can change which channel you are using too.

 <gui>BSSID</gui>

This is the Basic Service Set Identifier. The SSID (see above) is the name of the network which humans are intended to read; the BSSID is a name which the computer understands (it's a string of letters and numbers that is supposed to be unique to the wireless network). If a network is hidden, it will not have an SSID but it will have a BSSID.

 <gui>Device MAC address</gui>

A MAC address is a code which identifies a piece of network hardware (for example, a wireless card, an Ethernet network card or a router). Every device that you can connect to a network has a unique MAC address which was given to it in the factory.

This option can be used to change the MAC address of your network card.

 <gui>Cloned MAC address</gui>

Your network hardware (wireless card) can pretend to have a different MAC address. This is useful if you have a device or service which will only communicate with a certain MAC address (for example, a cable broadband modem). If you put that MAC address into the cloned MAC address box, the device/service will think that your computer has the cloned MAC address rather than its real one.

 <gui>MTU</gui>

This setting changes the Maximum Transmission Unit, which is the maximum size of a chunk of data that can be sent over the network. When files are sent over a network, data is broken up into small chunks (or packets). The optimal MTU for your network will depend on how likely it is for packets to be lost (due to a noisy connection) and how fast the connection is. In general, you should not need to change this setting.
Wireless Security <gui>Security</gui>

This defines what sort of encryption your wireless network uses. Encrypted connections help protect your wireless connection from being intercepted, so other people can't "listen in" and see what websites you're visiting and so on.

Some types of encryption are stronger than others, but may not be supported by older wireless networking equipment. You'll normally need to type a password for the connection; more sophisticated types of security may also require a username and a digital "certificate". See for more information on popular types of wireless encryption.
IPv4 Settings

Use this tab to define information like the IP address of your computer and which DNS servers it should use. Change the Method to see different ways of getting/setting that information.

The following methods are available:

<gui>Automatic (DHCP)</gui>

Get information like the IP address and DNS server to use from a DHCP server. A DHCP server is a computer (or other device, like a router) connected to the network which decides which network settings your computer should have - when you first connect to the network, you will automatically be assigned the correct settings. Most networks use DHCP.

 <gui>Automatic (DHCP) addresses only</gui>

If you choose this setting, your computer will get its IP address from a DHCP server, but you will have to manually define other details (like which DNS server to use).

 <gui>Manual</gui>

Choose this option if you would like to define all of the network settings yourself, including which IP address the computer should use.

 <gui>Link-Local Only</gui>

Link-Local is a way of connecting computers together on a network without requiring a DHCP server or manually defining IP addresses and other information. If you connect to a Link-Local network, the computers on the network will decide amongst themselves which IP addresses to use and so on. This is useful if you want to temporarily connect a few computers together so they communicate with each other.

 <gui>Disabled</gui>

This option will disable the network connection and prevent you from connecting to it. Note that IPv4 and IPv6 are treated as separate connections even though they are for the same network card. If you have one enabled, you may wish to set the other to disabled.
IPv6 Settings

This is similar to the IPv4 tab except it deals with the newer IPv6 standard. Very modern networks use IPv6, but IPv4 is still more popular at the moment.

 usr/share/help-langpack/hr/ubuntu-help/addremove-install-synaptic.page0000644000373100047300000000527412701706767030071 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Greg Beam ki7mt@yahoo.com Synaptic is a powerful but complicated software management alternative to Software. Use Synaptic for more advanced software management

Synaptic Package Manager is more powerful and can do some software management tasks which Software can't. Synaptic's interface is more complicated and doesn't support newer Software features like ratings and reviews and therefore isn't recommended for use by those new to Ubuntu.

Synaptic isn't installed by default, but you can install it with Software.

Install software with Synaptic

Open Synaptic from the Dash or the Launcher. You will need to enter your password in the Authenticate window.

Click Search to search for an application, or click Sections and look through the categories to find one.

Right-click the application that you want to install and select Mark for Installation.

If you are asked to mark additional changes, click Mark.

Select any other applications that you would like to install.

Click Apply, and then click Apply in the window that appears. The applications that you chose will be downloaded and installed.

For more information about using Synaptic, consult the Synaptic How To.

usr/share/help-langpack/hr/ubuntu-help/net-general.page0000644000373100047300000000161312701706772025015 0ustar langpacklangpack00000000000000 Find your IP address, WEP & WPA security, MAC addresses, proxies… The Ubuntu Documentation Team The GNOME Documentation Project Networking terms & tips usr/share/help-langpack/hr/ubuntu-help/contacts-connect.page0000644000373100047300000000252012701706772026057 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Ekaterina Gerasimova kittykat3756@gmail.com 2013 Email, chat with, or phone a contact. Connect with your contact

To email, chat with, or phone someone in Contacts:

Select the contact from your contact list.

Press on the Detail that you want to use. For example, to email your contact, press the email address.

The corresponding application will be launched using the contact's details.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless-troubleshooting-device-drivers.page0000644000373100047300000001411112701706773033371 0ustar langpacklangpack00000000000000 Contributors to the Ubuntu documentation wiki Phil Bull philbull@gmail.com Some device drivers don't work very well with certain wireless adapters, so you may need to find a better one. Wireless network troubleshooter Make sure that working device drivers are installed

In this step you can check to see if you can get working device drivers for your wireless adapter. A device driver is a piece of software which tells the computer how to make a hardware device work properly. Even though the wireless adapter has been recognized by the computer, it may not have drivers which work very well. You may be able to find different drivers for the wireless adapter which do work. Try some of the options below:

Check to see if your wireless adapter is on a list of supported devices

Most Linux distributions keep a list of wireless devices that they have support for. Sometimes, these lists provide extra information on how to get the drivers for certain adapters working properly. Go to the list for your distribution (for example, Ubuntu, Fedora or openSuSE) and see if your make and model of wireless adapter is listed. You may be able to use some of the information there to get your wireless drivers working.

Look for additional open or proprietary drivers

Although Ubuntu includes support for a large amount of devices, some drivers need to be installed separately. Use the Additional Drivers tool to check for these extra open or proprietary drivers.

Click the button at the far right side of the menu bar and select System Settings.

In the System section, click Software & Updates.

Switch to the Additional Drivers tab.

Use the Windows drivers for your adapter

In general, you cannot use a device driver designed for one operating system (like Windows) on another operating system (like Linux). This is because they have different ways of handling devices. For wireless adapters, however, you can install a compatibility layer called NDISwrapper which lets you use some Windows wireless drivers on Linux. This is useful because wireless adapters almost always have Windows drivers available for them, whereas Linux drivers are sometimes not available. You can learn more about how to use NDISwrapper here. Note that not all wireless drivers can be used through NDISwrapper.

Full information on ndiswrapper kept on this page including troubleshooting help specific to ndiswrapper.

 usr/share/help-langpack/hr/ubuntu-help/files-select.page0000644000373100047300000000403612701706774025177 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Press CtrlS to select multiple files which have similar names. Select files by pattern

You can select files in a folder using a pattern on the file name. Press CtrlS to bring up the Select Items Matching window. Type in a pattern using common parts of the file names plus wild card characters. There are two wild card characters available:

* matches any number of any characters, even no characters at all.

? matches exactly one of any character.

For example:

If you have an OpenDocument Text file, a PDF file, and an image that all have the same base name Invoice, select all three with the pattern

Invoice.*

If you have some photos that are named like Vacation-001.jpg, Vacation-002.jpg, Vacation-003.jpg; select them all with the pattern

Vacation-???.jpg

If you have photos as before, but you've edited some of them and added -edited to the end of the file name of the photos you've edited, select the edited photos with

Vacation-???-edited.jpg

 usr/share/help-langpack/hr/ubuntu-help/net-wrongnetwork.page0000644000373100047300000000326612701706776026160 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Phil Bull philbull@gmail.com Edit your connection settings, and remove the unwanted connection option. My computer connects to the wrong network

When you turn your computer on or move to a different location, your computer will automatically try to connect to wireless networks that you have connected to in the past. If it tries to connect to the wrong network each time (that is, not the one that you want it to connect to), do the following:

Click the network menu on the menu bar and select Edit Connections.

Go to the Wireless tab and find the network that you don't want it to keep connecting to.

Click that network once to select it and click Delete. Your computer won't try to connect to that network any more.

If you later want to connect to the network you just deleted, simply select it from the list of wireless networks that appears when you click the network menu on the menu bar - just as you would connect to any other wireless network.

 usr/share/help-langpack/hr/ubuntu-help/mouse-disabletouchpad.page0000644000373100047300000000274012701706772027077 0ustar langpacklangpack00000000000000 Turn the touchpad off while typing to prevent accidental clicks. Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Disable touchpad while typing

Touchpads on laptops are often located where you rest your wrist while typing, which can sometimes cause accidental clicks while you type. You can disable the touchpad while you type. It will only work again a short time after your last key stroke.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Mouse & Touchpad.

In the Touchpad section, check Disable while typing.

The Touchpad section only appears if your system has a touchpad.

 usr/share/help-langpack/hr/ubuntu-help/contacts-edit-details.page0000644000373100047300000000354512701706773027007 0ustar langpacklangpack00000000000000 Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com Edit the information for each contact. Edit contact details

Editing contact details helps you keep the information in your address book up to date and complete.

Select the contact from your contact list.

Press Edit in the top-right corner of Contacts.

Edit the contact details.

To add a detail such as a new phone number or email address, press New Detail and select the field that you want to add.

Press Done to finish editing the contact.

In the case of linked contacts, you can edit a profile by clicking on the profile's avatar.

 usr/share/help-langpack/hr/ubuntu-help/files-share.page0000644000373100047300000000532412701706773025022 0ustar langpacklangpack00000000000000 Transfer files to your email contacts from the file manager. Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Share and transfer files

You can share files with your contacts or transfer them to external devices or network shares directly from the file manager.

Open the file manager.

Locate the file you want to transfer.

Right-click the file and select Send To.

The Send To window will appear. Choose where you want to send the file and click Send. See the list of destinations below for more information.

You can send multiple files at once. Select multiple files by holding down Ctrl, then right-click any selected file. You can have the files automatically compressed into a zip or tar archive.

 Destinations

To email the file, select Email and enter the recipient's email address.

To send the file to an instant messaging contact, select Instant Message, then select contact from the drop-down list. Your instant messaging application may need to be started for this to work.

To write the file to a CD or DVD, select CD/DVD Creator. See to learn more.

To transfer the file to a Bluetooth device, select Bluetooth (OBEX Push) and select the device to send the file to. You will only see devices you have already paired with. See for more information.

To copy a file to an external device like a USB flash drive, or to upload it to a server you've connected to, select Removable disks and shares, then select the device or server you want to copy the file to.

 usr/share/help-langpack/hr/ubuntu-help/nautilus-file-properties-basic.page0000644000373100047300000001167012701706775030655 0ustar langpacklangpack00000000000000 View basic file information, set permissions, and choose default applications. Tiffany Antopolski tiffany@antopolski.com Shaun McCance shaunm@gnome.org File properties

To view information about a file or folder, right-click it and select Properties. You can also select the file and press AltEnter.

The file properties window shows you information like the type of file, the size of the file, and when you last modified it. If you need this information often, you can have it displayed in list view columns or icon captions.

The information given on the Basic tab is explained below. There are also Permissions and Open With tabs. For certain types of files, such as images and videos, there will be an extra tab that provides information like the dimensions, duration, and codec.

Basic properties <gui>Name</gui>

You can rename the file by changing this field. You can also rename a file outside the properties window. See .

 <gui>Type</gui>

This helps you identify the type of the file, such as PDF document, OpenDocument Text, or JPEG image. The file type determines which applications can open the file, among other things. For example, you can't open a picture with a music player. See for more information on this.

The MIME type of the file is shown in parentheses; MIME type is a standard way that computers use to refer to the file type.

 Contents

This field is displayed if you are looking at the properties of a folder rather than a file. It helps you see the number of items in the folder. If the folder includes other folders, each inner folder is counted as one item, even if it contains further items. Each file is also counted as one item. If the folder is empty, the contents will display nothing.

 Size

This field is displayed if you are looking at a file (not a folder). The size of a file tells you how much disk space it takes up. This is also an indicator of how long it will take to download a file or send it in an email (big files take longer to send/receive).

Sizes may be given in bytes, KB, MB, or GB; in the case of the last three, the size in bytes will also be given in parentheses. Technically, 1 KB is 1024 bytes, 1 MB is 1024 KB and so on.

 Location

The location of each file on your computer is given by its absolute path. This is a unique "address" of the file on your computer, made up of a list of the folders that you would need to go into to find the file. For example, if Jim had a file called Resume.pdf in his Home folder, its location would be /home/jim/Resume.pdf.

 Volume

The file system or device that the file is stored on. This shows you where the file is physically stored, for example if it is on the hard disk or on a CD, or a network share or file server. Hard disks can be split up into several disk partitions; the partition will be displayed under Volume too.

 Free Space

This is only displayed for folders. It gives the amount of disk space which is available on the disk that the folder is on. This is useful for checking if the hard disk is full.

 Accessed

The date and time when the file was last opened.

 Modified

The date and time when the file was last changed and saved.
usr/share/help-langpack/hr/ubuntu-help/user-admin-explain.page0000644000373100047300000000724412701706774026326 0ustar langpacklangpack00000000000000 You need admin privileges to change important parts of your system. GNOME Documentation Project gnome-doc-list@gnome.org How do administrative privileges work?

As well as the files that you create, your computer has a number of files which are needed by the system for it to work properly. If these important system files are changed improperly they can cause various things to break, so they are protected from changes by default. Certain applications also modify important parts of the system, and so are also protected.

The way that they are protected is by only allowing users with administrative privileges to change the files or use the applications. In day-to-day use, you won't need to change any system files or use these applications, so by default you do not have admin privileges.

Sometimes you need to use these applications, so you may be able to temporarily get admin privileges to allow you to make the changes. If an application needs admin privileges, it will ask for your password. For example, if you want to install some new software, the software installer (package manager) will ask for your admin password so it can add the new application to the system. Once it has finished, your admin privileges will be taken away again.

Admin privileges are associated with your user account. Some users are allowed to have admin privileges and some are not. Without admin privileges you will not be able to install software. Some user accounts (for example, the "root" account) have permanent admin privileges. You shouldn't use admin privileges all of the time, because you might accidentally change something you did not intend to (like delete a needed system file, for example).

In summary, admin privileges allow you to change important parts of your system when needed, but prevent you from doing it accidentally.

What does "super user" mean?

A user with admin privileges is sometimes called a super user. This is simply because that user has more privileges than normal users. You might see people discussing things like su and sudo; these are programs for temporarily giving you "super user" (admin) privileges.
Why are admin privileges useful?

Requiring users to have admin privileges before important system changes are made is useful because it helps to prevent your system from being broken, intentionally or unintentionally.

If you had admin privileges all of the time, you might accidentally change an important file, or run an application which changes something important by mistake. Only getting admin privileges temporarily, when you need them, reduces the risk of these mistakes happening.

Only certain trusted users should be allowed to have admin privileges. This prevents other users from messing with the computer and doing things like uninstalling applications that you need, installing applications that you don't want, or changing important files. This is useful from a security standpoint.

 usr/share/help-langpack/hr/ubuntu-help/user-admin-problems.page0000644000373100047300000000247612701706773026512 0ustar langpacklangpack00000000000000 You can only do some things, like installing applications, if you have admin privileges. GNOME Documentation Project gnome-doc-list@gnome.org Problems caused by administrative restrictions

You may experience a few problems if you don't have administrative privileges. Some tasks require admin privileges in order to work, such as:

Connecting to networks or wireless networks

Viewing the contents of a removable disk connected to the computer, or the contents of a different disk partition (e.g. a Windows partition)

Installing new applications

You can change who has admin privileges.

 usr/share/help-langpack/hr/ubuntu-help/numeric-keypad.page0000644000373100047300000000325512701706773025536 0ustar langpacklangpack00000000000000 Enable the numeric keypad by default. Ubuntu Documentation Team Numeric keypad

With the Num Lock key you can manually switch on or off the numeric keypad on your keyboard. Also, computers' BIOS settings often include an option to decide if the computer should be started with the numeric keypad enabled. Otherwise, this is a way to configure it:

Install the numlockx package.

Open Startup Applications and add a startup program with the command: numlockx on

If you want the numeric keyboard to be on also at the login screen, you can create a special configuration file. Press CtrlAltT to open a terminal window, and then run this command (it's one long command, even if it may be shown wrapped on the screen - copy and paste to get it right):

sudo sh -c 'printf "[SeatDefaults]\ngreeter-setup-script=numlockx on\n" >/usr/share/lightdm/lightdm.conf.d/50-numlock.conf'

 usr/share/help-langpack/hr/ubuntu-help/color-whyimportant.page0000644000373100047300000000706012701706773026500 0ustar langpacklangpack00000000000000 Color management is important for designers, photographers and artists. Richard Hughes richard@hughsie.com Why is color management important?

Color management is the process of capturing a color using an input device, displaying it on a screen, and printing it all whilst managing the exact colors and the range of colors on each medium.

The need for color management is probably explained best with a photograph of a bird on a frosty day in winter.

A bird on a frosty wall as seen on the camera view-finder

Displays typically over-saturate the blue channel, making the images look cold.

This is what the user sees on a typical business laptop screen

Notice how the white is not 'paper white' and the black of the eye is now a muddy brown.

This is what the user sees when printing on a typical inkjet printer

The basic problem we have here is that each device is capable of handling a different range of colors. So while you might be able to take a photo of electric blue, most printers are not going to be able to reproduce it.

Most image devices capture in RGB (Red, Green, Blue) and have to convert to CMYK (Cyan, Magenta, Yellow, and Black) to print. Another problem is that you can't have white ink, and so the whiteness can only be as good as the paper color.

Another problem is units. Without specifying the scale on which a color is measured, we don't know if 100% red is near infrared or just the deepest red ink in the printer. What is 50% red on one display is probably something like 62% on another display. It's like telling a person that you've just driven 7 units of distance, without the unit you don't know if that's 7 kilometers or 7 meters.

In color, we refer to the units as gamut. Gamut is essentially the range of colors that can be reproduced. A device like a DSLR camera might have a very large gamut, being able to capture all the colors in a sunset, but a projector has a very small gamut and all the colors are going to look "washed out".

In some cases we can correct the device output by altering the data we send to it, but in other cases where that's not possible (you can't print electric blue) we need to show the user what the result is going to look like.

For photographs it makes sense to use the full tonal range of a color device, to be able to make smooth changes in color. For other graphics, you might want to match the color exactly, which is important if you're trying to print a custom mug with the Red Hat logo that has to be the exact Red Hat Red.

usr/share/help-langpack/hr/ubuntu-help/a11y-braille.page0000644000373100047300000000202512701706774024777 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Koristite Orca čitač zaslona s osvježavajućim Brailleovim prikazom. Read screen in Braille

GNOME provides the Orca screen reader to display the user interface on a refreshable Braille display. Depending on how you installed GNOME, you might not have Orca installed. Install Orca, then refer to the Orca Help for more information.

usr/share/help-langpack/hr/ubuntu-help/sound-usemic.page0000644000373100047300000000363112701706774025233 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Use an analog or USB microphone and select a default input device. Use a different microphone

You can use an external microphone for chatting with friends, speaking with colleagues at work, making voice recordings, or using other multimedia applications. Even if your computer has a built-in microphone or a webcam with a microphone, a separate microphone usually provides better audio quality.

If your microphone has a circular plug, just plug it into the appropriate adapter on your computer. Most computers have two adapters: one for microphones and one for speakers. Look for a picture of a microphone next to the adapter. Microphones plugged into the appropriate adapter will usually be used by default. If not, see the instructions below for selecting a default input device.

If you have a USB microphone, plug it into any USB port on your computer. USB microphones act as separate audio devices, and you may have to specify which microphone to use by default.

Select a default audio input device

Click the sound menu on the menu bar and select Sound Settings.

On the Input tab, select the device in the list of devices. The input level indicator should respond when you speak.

 usr/share/help-langpack/hr/ubuntu-help/power-closelid.page0000644000373100047300000000510112701706773025541 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Ekaterina Gerasimova kittykat3756@gmail.com Laptops go to sleep when you close the lid, in order to save power. Why does my computer turn off when I close the lid?

When you close the lid of your laptop, your computer will suspend in order to save power. This means that the computer isn't actually turned off - it has just gone to sleep. You can resume it by opening the lid. If it doesn't resume, try clicking the mouse or pressing a key. If that still doesn't work, press the power button.

Some computers are unable to suspend properly, normally because their hardware isn't completely supported by the operating system (for example, the Linux drivers are incomplete). In this case, you may find that you are unable to resume your computer after you've closed the lid. You can try to fix the problem with suspend, or you can prevent the computer from trying to suspend when you close the lid.

Stop the computer from suspending when the lid is closed

If you don't want the computer to suspend when you close the lid, you can change the settings for that behavior:

Be very careful if you change this setting. Some laptops can overheat if they are left running with the lid closed, especially if they are in a confined place like a backpack.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

In the Hardware section, click Power.

Set the drop-down menus next to When the lid is closed to Do nothing.
usr/share/help-langpack/hr/ubuntu-help/files-sort.page0000644000373100047300000000700712701706771024705 0ustar langpacklangpack00000000000000 Arrange files by name, size, type, or when they were changed. Phil Bull philbull@gmail.com Jim Campbell jwcampbell@gmail.com Michael Hill mdhillca@gmail.com Sort files and folders

You can sort files in different ways in a folder, for example by sorting them in order of date or file size. See below for a list of common ways to sort files. See for information on how to change the default sort order.

The way that you can sort files depends on the folder view that you are using. You can change the current view using the list or icon buttons in the toolbar.

Icon view

To sort files in a different order, click the down button in the toolbar and choose By Name, By Size, By Type or By Modification Date.

As an example, if you select By Name, the files will be sorted by their names, in alphabetical order. See for other options.

You can sort in the reverse order by selecting Reversed Order from the pull-down menu.

List view

To sort files in a different order, click one of the column headings in the file manager. For example, click Type to sort by file type. Click the column heading again to sort in the reverse order.

In list view, you can show columns with more attributes and sort on those columns. Click the down button in the toolbar, pick Visible Columns and select the columns that you want to be visible. You will then be able to sort by those columns. See for descriptions of available columns.

Ways of sorting files By Name

Sorts alphabetically by the name of the file.

 By Size

Sorts by the size of the file (how much disk space it takes up). Sorts from smallest to largest by default.

 By Type

Sorts alphabetically by the file type. Files of the same type are grouped together, then sorted by name.

 By Modification Date

Sorts by the date and time that a file was last changed. Sorts from oldest to newest by default.
usr/share/help-langpack/hr/ubuntu-help/net-wireless-noconnection.page0000644000373100047300000000577012701706767027743 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Double-check the password, try using the pass key instead of the password, turn the wireless card off and on again… I've entered the correct password, but I still can't connect

If you're sure that you entered the correct wireless password but you still can't successfully connect to a wireless network, try some of the following:

Double-check that you have the right password

Passwords are case-sensitive (it matters whether they have capital or lower-case letters), so check that you didn't get the case of one of the letters wrong.

Try the hex or ASCII pass key

The password you enter can also be represented in a different way - as a string of characters in hexadecimal (numbers 0-9 and letters a-f) called a pass key. Each password has an equivalent pass key. If you have access to the pass key as well as the password/passphrase, try typing the pass key instead. Make sure you select the correct wireless security option when asked for your password (for example, select WEP 40/128-bit Key if you're typing the 40-character pass key for a WEP-encrypted connection).

Try turning your wireless card off and then on again

Sometimes wireless cards get stuck or experience a minor problem that means they won't connect. Try turning the card off and then on again to reset it - see for more information.

Check that you're using the right type of wireless security

When prompted for your wireless security password, you can choose which type of wireless security to use. Make sure you choose the one that is used by the router or wireless base station. This should be selected by default, but sometimes it will not be for some reason. If you don't know which one it is, use trial and error to go through the different options.

Check that your wireless card is properly supported

Some wireless cards aren't supported very well. They show up as a wireless connection, but they can't connect to a network because their drivers lack the ability to do this. See if you can get an alternative wireless driver, or if you need to perform some extra set-up (like installing a different firmware). See for more information.

 usr/share/help-langpack/hr/ubuntu-help/wacom-stylus.page0000644000373100047300000000427412701706774025273 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Define the button functions and pressure feel of the Wacom stylus. Configure the stylus

Click the icon at the far right of the menu bar and select System Settings.

Open Wacom Graphics Tablet.

If no tablet is detected, you'll be asked to Please plug in or turn on your Wacom tablet.

The lower part of the panel contains details and settings specific to your stylus, with the device name (the stylus class) and diagram to the left. These settings can be adjusted:

Eraser Pressure Feel: use the slider to adjust the "feel" (how physical pressure is translated to digital values) between Soft and Firm.

Button/Scroll Wheel configuration (these change to reflect the stylus). Click the menu next to each label to select one of these functions: No Action, Left Mouse Button Click, Middle Mouse Button Click, Right Mouse Button Click, Scroll Up, Scroll Down, Scroll Left, Scroll Right, Back, Forward.

Tip Pressure Feel: use the slider to adjust the "feel" between Soft and Firm.

If you have more than one stylus, when the additional stylus gets close to the tablet, a pager will be displayed next to the stylus device name. Use the pager to choose which stylus to configured.

 usr/share/help-langpack/hr/ubuntu-help/printing-streaks.page0000644000373100047300000000341012701706770026113 0ustar langpacklangpack00000000000000 If print-outs are streaky, fading, or missing colors, check your ink levels or clean the print head. GNOME Documentation Project gnome-doc-list@gnome.org Why are there streaks, lines or the wrong colors on my print-outs?

If your print-outs are streaky, faded, have lines on them that shouldn't be there, or are otherwise poor in quality, this may be due to a problem with the printer or a low ink/toner supply.

Fading text or images

You may be running out of ink or toner. Check your ink/toner supply and buy a new cartridge if necessary.

Streaks and lines

If you have an inkjet printer, the print head may be dirty or partially blocked. Try cleaning the print head (see the printer's manual for instructions).

Wrong colors

The printer may have run out of one color of ink or toner. Check your ink/toner supply and buy a new cartridge if necessary.

Jagged lines, or lines aren't straight

If lines on your print-out that should be straight turn out jagged, you may need to align the print head. See the printer's instruction manual for details on how to do this.

 usr/share/help-langpack/hr/ubuntu-help/hardware-problems-graphics.page0000644000373100047300000000140112701706772030023 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Troubleshoot screen and graphics problems. Screen problems

Most problems with the display are caused by issues with graphics drivers or configuration. Which of the topics below best describes the problem you are experiencing?

 usr/share/help-langpack/hr/ubuntu-help/nautilus-preview.page0000644000373100047300000000467612701706767026157 0ustar langpacklangpack00000000000000 Control when thumbnails are used for files. Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com File manager preview preferences

The file manager creates thumbnails to preview image, video, and text files. Thumbnail previews can be slow for large files or over networks, so you can control when previews are made. Click Files in the menu bar, pick Preferences and select the Preview tab.

<gui>Files</gui>

By default, all previews are done for Local Files Only, those on your computer or connected external drives. You can set this feature to Always or Never. The file manager can browse files on other computers over a local area network or the internet. If you often browse files over a local area network, and the network has high bandwidth, you may want to set the preview option to Always.

In addition, you can use the Only for files smaller than setting to limit the size of files previewed.

 <gui>Folders</gui>

If you show file sizes in list view columns or icon captions, folders will be shown with a count of how many files and folders they contain. Counting items in a folder can be slow, especially for very large folders, or over a network. You can turn this feature on or off, or turn it on only for files on your computer and local external drives.

 usr/share/help-langpack/hr/ubuntu-help/mouse.page0000644000373100047300000000235312701706775023751 0ustar langpacklangpack00000000000000 Left-handed, speed and sensitivity, touchpad clicking and scrolling… Tiffany Antopolski tiffany.antopolski@gmail.com Mouse
Common mouse problems Common problems Common problems
Mouse tips Tips Tips
usr/share/help-langpack/hr/ubuntu-help/user-accounts.page0000644000373100047300000000302712701706770025406 0ustar langpacklangpack00000000000000 Users Add user or guest user, change password, administrators… GNOME Documentation Project gnome-doc-list@gnome.org User accounts

Each person that uses the computer should have a different user account. This allows them to keep their files separate from yours and to choose their own settings. It's also more secure. You can only access a different user account if you know the password.

Accounts Manage user accounts
Passwords
Privileges User privileges
usr/share/help-langpack/hr/ubuntu-help/documents-info.page0000644000373100047300000000420412701706770025543 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 Greg Beam ki7mt@yahoo.com 2014 See a document's name, location, date modified, or type. Find information about documents

When a document is created, it comes with metadata. Documents displays the following metadata for each document:

Title: the name of the document, which can be edited;

Source: the path of the folder containing the document;

Date Modified;

Type: the file format of the document.

To see a document's properties:

Click the Check button to switch to selection mode.

Select a document.

Click the Properties button at the right end of the button bar.

Some types of documents (e.g. PDF files) can be password protected, preventing access to their metadata or content.

Files does not currently offer any mechanism to add privacy to a document. You may be able to do this from the application you used to create the document (e.g. LibreOffice or Adobe Acrobat ).

 usr/share/help-langpack/hr/ubuntu-help/music-cantplay-drm.page0000644000373100047300000000401012701706776026323 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Support for that file format might not be installed or the songs could be "copy protected". I can't play the songs I bought from an online music store

If you downloaded some music from an online store you may find that it won't play on your computer, especially if you bought it on a Windows or Mac OS X computer and then copied it over.

This could be because the music is in a format that is not recognized by your computer. To be able to play a song you need to have support for the right audio formats installed - for example, if you want to play MP3 files, you need MP3 support installed. If you don't have support for a given audio format, you should see a message telling you so when you try to play a song. The message should also provide instructions for how to install support for that format so that you can play it.

If you do have support installed for the song's audio format but still can't play it, the song might be copy protected (also known as being DRM restricted). DRM is a way of restricting who can play a song and on what devices they can play it. The company that sold the song to you is in control of this, not you. If a music file has DRM restrictions, you will probably not be able to play it - you generally need special software from the vendor to play DRM restricted files, but this software is often not supported on Linux.

You can learn more about DRM from the Electronic Frontier Foundation.

 usr/share/help-langpack/hr/ubuntu-help/keyboard-nav.page0000644000373100047300000001531412701706767025205 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Use applications and the desktop without a mouse. Keyboard navigation

This page details keyboard navigation for people who cannot use a mouse or other pointing device, or who want to use a keyboard as much as possible. For keyboard shortcuts that are useful to all users, see instead.

If you cannot use a pointing device like a mouse, you can control the mouse pointer using the numeric keypad on your keyboard. See for details.

 Navigate user interfaces

Tab and CtrlTab

Move keyboard focus between different controls. Ctrl Tab moves between groups of controls, such as from a sidebar to the main content. CtrlTab can also break out of a control that uses Tab itself, such as a text area.

Hold down Shift to move focus in reverse order.

Arrow keys

Move selection between items in a single control, or among a set of related controls. Use the arrow keys to focus buttons in a toolbar, select items in a list or icon view, or select a radio button from a group.

In a tree view, use the left and right arrow keys to collapse and expand items with children.

CtrlArrow keys

In a list or icon view, move the keyboard focus to another item without changing which item is selected.

ShiftArrow keys

In a list or icon view, select all items from the currently selected item to the newly focused item.

Space

Activate a focused item such as a button, check box, or list item.

CtrlSpace

In a list or icon view, select or deselect the focused item without deselecting other items.

Alt

Hold down the Alt key to reveal accelerators: underlined letters on menu items, buttons, and other controls. Press Alt plus the underlined letter to activate a control, just as if you had clicked on it.

Esc

Exit a menu, popup, switcher, or dialog window.

F10

Open the first menu on the menu bar of a window. Use the arrow keys to navigate the menus.

ShiftF10 or the Menu key

Pop up the context menu for the current selection, as if you had right-clicked.

CtrlF10

In the file manager, pop up the context menu for the current folder, as if you had right-clicked on the background and not on any item.

CtrlPageUp and CtrlPageDown

In a tabbed interface, switch to the tab to the left or right.
Navigate the desktop
Navigate windows

AltF4

Close the current window.

CtrlSuper↓

Restore a maximized window to its original size.

AltF7

Move the current window. Press AltF7, then use the arrow keys to move the window. Press Enter to finish moving the window, or Esc to return it to its original place.

AltF8

Resize the current window. Press AltF8, then use the arrow keys to resize the window. Press Enter to finish resizing the window, or Esc to return it to its original size.

CtrlSuper↑

Maximize a window.

CtrlSuper←

Maximize a window vertically along the left side of the screen.

CtrlSuper→

Maximize a window vertically along the right side of the screen.

AltSpace

Pop up the window menu, as if you had right-clicked on the titlebar.
usr/share/help-langpack/hr/ubuntu-help/power-batterylife.page0000644000373100047300000000767012701706776026275 0ustar langpacklangpack00000000000000 Tips to reduce the power consumption of your computer. GNOME Documentation Project gnome-doc-list@gnome.org Phil Bull philbull@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com Michael Hill mdhillca@gmail.com Use less power and improve battery life

Computers can use a lot of power. By using some simple energy-saving strategies, you can reduce your energy bill and help the environment. If you have a laptop, this will also help to increase the amount of time it can run on battery power.

General tips

Suspend your computer when you are not using it. This significantly reduces the amount of power it uses, and it can be woken up very quickly.

Turn off the computer when you will not be using it for longer periods. Some people worry that turning off a computer regularly may cause it to wear out faster, but this is not the case.

Use the Power preferences in System Settings to change your power settings. There are a number of options that will help to save power: you can automatically dim the display after a certain time; reduce the display brightness (for laptops); and have the computer automatically suspend if you have not used it for a certain period of time.

Turn off any external devices (like printers and scanners) when you are not using them.
Laptops, netbooks, and other devices with batteries

Reduce the screen brightness; powering the screen accounts for a significant fraction of a laptop's power consumption.

Most laptops have buttons on the keyboard (or a keyboard shortcut) that you can use to reduce the brightness.

If you do not need an Internet connection for a little while, turn off the wireless/Bluetooth card. These devices work by broadcasting radio waves, which takes quite a bit of power.

Some computers have a physical switch that can be used to turn it off, whereas others have a keyboard shortcut that you can use instead. You can turn it on again when you need it.
More advanced tips

Reduce the number of tasks that are running in the background. Computers use more power when they have more work to do.

Most of your running applications do very little when you are not actively using them. However, applications that frequently grab data from the internet, play music or movies can impact your power consumption.
usr/share/help-langpack/hr/ubuntu-help/shell-apps-favorites.page0000644000373100047300000000332712701706773026671 0ustar langpacklangpack00000000000000 Add, move, or remove frequently-used program icons on the Launcher. GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Project ubuntu-doc@list.ubuntu.com Change which applications show in the Launcher

To add an application to the Launcher for quick access:

Drag the application's icon from the Dash onto the Launcher.

Alternatively, when an application is running, right click on the application icon and select Lock to Launcher.

The Launcher icon order can be changed by dragging an icon off of the Launcher, and then back onto it in the desired location.

To remove an application icon from the Launcher, right click on the application icon and select Unlock from Launcher.

 usr/share/help-langpack/hr/ubuntu-help/addremove.page0000644000373100047300000000143112701706767024564 0ustar langpacklangpack00000000000000 Add/remove software Ubuntu Documentation Team Install, remove, extra repositories… Add & remove software usr/share/help-langpack/hr/ubuntu-help/net-chat-skype.page0000644000373100047300000000373212701706771025453 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Skype is proprietary software and must be installed manually on Ubuntu How can I use Skype on Ubuntu?

Skype is proprietary software that allows you to make calls over the Internet using your computer.

Skype uses decentralized peer-to-peer technologies, so your calls do not go through a central server, but through distributed servers and other users.

The Skype software is free to use, but it is not free software; the source code is proprietary and not available for modification.

Skype is not installed by default on Ubuntu. Install the skype package to use it.

You need to activate the Canonical Partner Repository to install Skype

Additional resources for help with <app>Skype</app>

How to record Skype conversations

A list of webcams which are compatible with Skype

Troubleshooting Skype - for advanced users

usr/share/help-langpack/hr/ubuntu-help/documents-select.page0000644000373100047300000000352012701706771026070 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 Use selection mode to select more than one document or collection. Selecting documents

From Documents selection mode you can open, print, view or make collections of your documents. To use selection mode:

Click the ✓ button.

Select one or more documents or collections. The button bar appears with the actions that are valid for your selection.
Selection mode actions

After selecting one or more documents you can:

Open with Document Viewer (folder icon).

Print (printer icon): print a document (only available when a single document is selected).

Organize (plus icon): create a collection of documents.

Properties (wrench icon): display the properties of a document (only available when a single document is selected).

Delete (trash icon): delete one or more collections.
usr/share/help-langpack/hr/ubuntu-help/mouse-problem-notmoving.page0000644000373100047300000001132112701706775027420 0ustar langpacklangpack00000000000000 How to check your mouse if it is not working. Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Mouse pointer is not moving
Check that the mouse is plugged in

If you have a mouse with a cable, check that it is firmly plugged in to your computer.

If it is a USB mouse (with a rectangular connector), try plugging it in to a different USB port. If it is a PS/2 mouse (with a small, round connector with six pins), make sure that it is plugged in to the green mouse port rather than the purple keyboard port. You may need to restart the computer if it was not plugged in.

Check that the mouse was recognized by your computer

Type CtrlAltT to open the Terminal.

In the terminal window, type xsetpointer -l | grep Pointer, exactly as it appears here, and press Enter.

A short list of mouse devices will appear. Check that at least one of the items says [XExtensionPointer] next to it, and that one of the [XExtensionPointer] items has the name of the mouse to the left of it.

If there is no entry that has the name of the mouse followed by [XExtensionPointer], then the mouse was not recognized by your computer. If the entry exists, your mouse was recognized by your computer. In this case you should check that the mouse is plugged in and in working condition.

If your mouse has a serial (RS-232) connector, you may need to perform some extra steps to get it working. The steps might depend on the make or model of your mouse.

It can be complicated to fix problems with mouse detection. Ask for support from your distribution or vendor if you think that your mouse has not been detected properly.

Check that the mouse actually works

Plug the mouse in to a different computer and see if it works.

If the mouse is an optical or laser mouse, a light should be shining out of the bottom of the mouse if it is turned on. If there is no light, check that it is turned on. If it is and there is still no light, the mouse may be broken.

Checking wireless mice

Make sure the mouse is turned on. There is often a switch on the bottom of the mouse to turn the mouse off completely, so you can move it from place to place without it constantly waking up.

If you are using a Bluetooth mouse, make sure you have actually paired the mouse with your computer. See .

Click a button and see if the mouse pointer moves now. Some wireless mice go to sleep to save power, so might not respond until you click a button. See .

Check that the battery of the mouse is charged.

Make sure that the receiver (dongle) is firmly plugged in to the computer.

If your mouse and receiver can operate on different radio channels, make sure that they are both set to the same channel.

You may need to press a button on the mouse, receiver or both to establish a connection. The instruction manual of your mouse should have more details if this is the case.

Most RF (radio) wireless mice should work automatically when you plug them into your computer. If you have a Bluetooth or IR (infrared) wireless mouse, you may need to perform some extra steps to get it working. The steps might depend on the make or model of your mouse.

usr/share/help-langpack/hr/ubuntu-help/documents.page0000644000373100047300000000245012701706770024613 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Organize the documents stored locally on your computer or created online. Documents

Documents is a GNOME application that lets you display, organize, and print the documents on your computer or those created remotely using Google Docs or SkyDrive.

View, Sort and Search
Select, Organize, Print
Questions
usr/share/help-langpack/hr/ubuntu-help/contacts-add-remove.page0000644000373100047300000000345012701706775026457 0ustar langpacklangpack00000000000000 Lucie Hankey ldhankey@gmail.com Michael Hill mdhillca@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com Add or remove a contact in the local address book. Add or remove a contact

To add a contact:

Press New.

In the New contact window, enter the contact name and the desired information. Click on the menu next to each field to choose Work, Home or Other.

Press Create Contact.

To remove a contact:

Select the contact from your contact list.

Press Edit in the top-right corner of Contacts.

Press Remove Contact.

 usr/share/help-langpack/hr/ubuntu-help/net-email.page0000644000373100047300000000133612701706773024472 0ustar langpacklangpack00000000000000 Default email apps The Ubuntu Documentation Team The GNOME Documentation Project Email & email software usr/share/help-langpack/hr/ubuntu-help/net-wireless-airplane.page0000644000373100047300000000312012701706771027020 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Ubuntu Documentation Team Click the network menu on the menu bar and uncheck Enable Wireless. Turn off wireless (airplane mode)

If you have your computer on an airplane (or some other area where wireless connections are not allowed), you should switch off your wireless. You may also want to switch off your wireless for other reasons (to save battery power, for example). To do this:

To do this, click the network menu on the menu bar and uncheck Enable Wireless. This will turn off your wireless connection until you switch it back on again.

To turn wireless back on, click the network menu on the menu bar and select Enable Wireless so that it has a checkmark in front of it.

Your laptop may still be broadcasting if you have not turned off Bluetooth.

 usr/share/help-langpack/hr/ubuntu-help/net-security-tips.page0000644000373100047300000000552712701706776026240 0ustar langpacklangpack00000000000000 General tips to keep in mind when using the internet Steven Richards steven.richardspc@gmail.com Staying safe on the internet

A possible reason for why you are using Ubuntu is the robust security that Linux based systems are known for. One reason that Linux is relatively safe from malware and viruses is due to the lower number of people who use it. Viruses are targeted at popular operating systems like Windows, that have an extremely large user base. Linux based systems are also very secure due to their open source nature, which allows experts to modify and enhance the security features included with each distribution.

Despite the measures taken to ensure that your installation of Ubuntu is secure, there are always vulnerabilities. As an average user on the internet you can still be susceptible to:

Phishing Scams (websites and emails that try to obtain sensitive information through deception)

Forwarding malicious emails

Applications with malicious intent (viruses)

Unauthorized remote/local network access

To stay safe online, keep in mind the following tips:

Be wary of emails, attachments, or links that were sent from people you do not know.

If a website's offer is too good to be true, or asks for sensitive information that seems unnecessary, then think twice about what information you are submitting and the potential consequences if that information is compromised by identity thieves or other criminals.

Be careful in providing any application root level permissions, especially ones that you have not used before or apps that are not well-known. Providing anyone/anything with root level permissions puts your computer at high risk to exploitation.

Make sure you are only running necessary remote-access services. Having SSH or VNC running can be useful, but also leaves your computer open to intrusion if not secured properly. Consider using a firewall to help protect your computer from intrusion.

 usr/share/help-langpack/hr/ubuntu-help/printing-setup.page0000644000373100047300000000621112701706771025602 0ustar langpacklangpack00000000000000 Set up a printer that is connected to your computer. Phil Bull philbull@gmail.com Jim Campbell jwcampbell@gmail.com Paul W. Frields stickster@gmail.com Shaun McCance shaunm@gnome.org Steven Richards steven.richardspc@gmail.com Michael Hill mdhillca@gmail.com Set up a local printer

Your system can recognize many types of printers automatically once they're connected. Most printers are connected with a USB cable that attaches to your computer.

You do not need to select whether you want to install network or local printer now. They are listed in one window.

Make sure the printer is turned on.

Connect the printer to your system via the appropriate cable. You may see activity on the screen as the system searches for drivers, and you may be asked to authenticate to install them.

A message will appear when the system is finished installing the printer. Select Print Test Page to print a test page, or Options to make additional changes in the printer setup.

If your printer was not set up automatically, you can add it in the printer settings.

Click the icon at the far right of the menu bar and select System Settings.

Open Printers.

Click Add and select the printer from the Devices window.

Click Forward and wait while it searches for drivers.

You can customize the printer's name, description, and location if you like. When finished, click Apply.

You can now print a test page or click Cancel to skip that step.

If there are multiple drivers available for your computer, you may be asked to select a driver. To use the recommended driver, just click Forward on the make and model screens.

After you install the printer, you may wish to change your default printer.

 usr/share/help-langpack/hr/ubuntu-help/a11y-slowkeys.page0000644000373100047300000000505412701706773025251 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com Have a delay between a key being pressed and that letter appearing on the screen. Turn on slow keys

Turn on slow keys if you would like there to be a delay between pressing a key and that letter being displayed on the screen. This means that you have to hold down each key you want to type for a little while before it appears. Use slow keys if you accidentally press several keys at a time when you type, or if you find it difficult to press the right key on the keyboard first time.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Otvorite Univerzalni pristup i odaberite Tipkanje tab.

Switch Slow Keys on.

Quickly turn slow keys on and off

Under Enable by Keyboard, select Turn on accessibility features from the keyboard to turn slow keys on and off from the keyboard. When this option is selected, you can press and hold Shift for eight seconds to enable or disable slow keys.

Use the Acceptance delay slider to control how long you have to hold a key down for it to register.

You can have your computer make a sound when you press a key, when a key press is accepted, or when a key press is rejected because you didn't hold the key down long enough.

usr/share/help-langpack/hr/ubuntu-help/net-wireless-connect.page0000644000373100047300000000640612701706775026674 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org The Ubuntu Documentation Team Get on the internet - wirelessly. Connect to a wireless network

If you have a wireless-enabled computer, you can connect to a wireless network that is within range to get access to the internet, view shared files on the network, and so on.

If you have a wireless hardware switch on your computer, make sure that it is turned on.

Click the network menu in the menu bar, and click the name of the network you want to connect to.

If the name of the network isn't in the list, select More Networks to see if the network is further down the list. If you still don't see the network, you may be out of range or the network might be hidden.

If the network is protected by a password (encryption key), enter the password when prompted and click Connect.

If you do not know the key, it may be written on the underside of the wireless router or base station, in its instruction manual, or you may have to ask the person who administers the wireless network.

The network icon will change appearance as the computer attempts to connect to the network.

If the connection is successful, the icon will change to a dot with several bars above it. More bars indicate a stronger connection to the network. If there aren't many bars, the connection is weak and might not be very reliable.

If the connection is not successful, you may be asked for your password again or it might just tell you that the connection has been disconnected. There are a number of things that could have caused this to happen. You could have entered the wrong password, the wireless signal could be too weak, or your computer's wireless card might have a problem, for example. See for more help.

A stronger connection to a wireless network does not necessarily mean that you have a faster internet connection, or that you will have faster download speeds. The wireless connection connects your computer to the device which provides the internet connection (like a router or modem), but the two connections are actually different, and so will run at different speeds.

 usr/share/help-langpack/hr/ubuntu-help/files-hidden.page0000644000373100047300000000640612701706775025157 0ustar langpacklangpack00000000000000 Make a file invisible, so you can't see it in the file manager. Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com Hide a file

The GNOME file manager gives you the ability to hide and unhide files at your discretion. When a file is hidden, it isn't displayed by the file manager, but it's still there in its folder.

To hide a file, rename it with a . at the beginning of its name. For example, to hide a file named example.txt, you should rename it to .example.txt.

You can hide folders in the same way that you can hide files. Hide a folder by placing a . at the beginning of the folder's name.
Show all hidden files

If you want to see all hidden files in a folder, go to that folder and either click the down button in the toolbar and pick Show Hidden Files, or press CtrlH. You will see all hidden files, along with regular files that are not hidden.

To hide these files again, either click the down button in the toolbar and pick Show Hidden Files, or press CtrlH again.

Unhide a file

To unhide a file, go to the folder containing the hidden file and click the down button in the toolbar and pick Show Hidden Files. Then, find the hidden file and rename it so that it doesn't have a . in front of its name. For example, to unhide a file called .example.txt, you should rename it to example.txt.

Once you have renamed the file, you can either click the down button in the toolbar and pick Show Hidden Files, or press CtrlH to hide any other hidden files again.

By default, you will only see hidden files in the file manager until you close the file manager. To change this setting so that the file manager will always show hidden files, see .

Most hidden files will have a . at the beginning of their name, but others might have a ~ at the end of their name instead. These files are backup files. See for more information.
usr/share/help-langpack/hr/ubuntu-help/net-default-email.page0000644000373100047300000000316012701706775026113 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Michael Hill mdhillca@gmail.com Change the default email client by going to Details in the System Settings. Change which mail application is used to write emails

When you click a button or link to send a new email (for example, in your word processing application), your default mail application will open up with a blank message, ready for you to write. If you have more than one mail application installed, however, the wrong mail application might open up. You can fix this by changing which one is the default email application:

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Details and choose Default Applications from the list on the left side of the window.

Choose which email client you would like to be used by default by changing the Mail option.

 usr/share/help-langpack/hr/ubuntu-help/backup-restore.page0000644000373100047300000000262012701706775025544 0ustar langpacklangpack00000000000000 Retrieve your files from a backup. Tiffany Antopolski tiffany.antopolski@gmail.com GNOME Documentation Project gnome-doc-list@gnome.org Restore a backup

If you lost or deleted some of your files, but you have a backup of them, you can restore them from the backup:

To restore your backup from a device such as an external hard drive, USB drive or another computer on the network, you can copy the files back to your computer.

If you created your backup using a backup application such as Déjà Dup, it is recommended that you use the same application to restore your backup. Review the application help for your backup program: it will provide specific instructions on how to restore your files.

 usr/share/help-langpack/hr/ubuntu-help/unity-shopping.page0000644000373100047300000000373112701706767025620 0ustar langpacklangpack00000000000000 Online results make the Dash more useful and help fund Ubuntu development. Jeremy Bicha jbicha@ubuntu.com Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com Why are there shopping links in the Dash?

In addition to helping you find apps or files on your computer, the Dash can also show you related online results for your searches. Online sources include Amazon.com and dozens of other online sources.

When you purchase music or products from these sources, Canonical receives a small portion of the profits in exchange for directing more business to these stores. Canonical, the company that created and continues to support the Ubuntu project, then uses this money to make Ubuntu better.

By default, the inclusion of online search results is turned off.

Turn on online search results

If you want to receive online search suggestions, you can enable this feature through the Security & Privacy system setting.

Click the system menu at the far right of the menu bar and select System Settings.

Open Security & Privacy and select the Search tab.

Switch on Include online search results.
usr/share/help-langpack/hr/ubuntu-help/power-constantfan.page0000644000373100047300000000363612701706771026272 0ustar langpacklangpack00000000000000 Some fan-control software could be missing, or your laptop may be running hot. GNOME Documentation Project gnome-doc-list@gnome.org The laptop fan is always running

If your laptop's cooling fan is always running, it could be that the hardware that controls the laptop's cooling system isn't very well supported in Linux. Some laptops need extra software to control their cooling fans efficiently, but this software may not be installed (or available for Linux at all) and so the fans just run at full speed all of the time.

If this is the case, you may be able to change some settings or install extra software that allows full control of the fan. For example, vaiofand can be installed to control the fans of some Sony VAIO laptops. Installing this software is quite a technical process which is highly dependent on the make and model of your laptop, so you may wish to seek specific advice on how to do it for your computer.

It is also possible that your laptop just produces a lot of heat. This does not necessarily mean that it is overheating; it might just need the fan to run at full speed all of the time to allow it to stay cool enough. If this is the case, you have little option but to let the fan run at full speed all of the time. You can sometimes buy additional cooling accessories for your laptop which may help.

 usr/share/help-langpack/hr/ubuntu-help/net-chat-empathy.page0000644000373100047300000000312712701706770025764 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com With Empathy you can chat, call and video call with friends and colleagues on a variety of networks Instant messaging on Ubuntu

With the Empathy application, you can chat with people online and with friends and colleagues who use Google Talk, AIM, Windows Live and many other chat programs. With a microphone or a webcam you can also have audio or video calls.

Empathy is installed by default in Ubuntu. Start Empathy Instant Messaging from the Dash, the Launcher or choose Chat from the Messaging menu.

You can change your instant messaging status (Available, Away, Busy, etc.) from the Messaging menu.

For help with using Empathy, read the Empathy manual.

usr/share/help-langpack/hr/ubuntu-help/disk-format.page0000644000373100047300000000546712701706776025053 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Remove all of the files and folders from an external hard disk or USB flash drive by formatting it. Wipe everything off a removable disk

If you have a removable disk, like a USB memory stick or an external hard disk, you may sometimes wish to completely remove all of its files and folders. You can do this by formatting the disk - this deletes all of the files on the disk and leaves it empty.

Format a removable disk

Open the Disks application from the Dash.

Open the Disks application from the Activities overview.

Select the disk you want to wipe from the Storage Devices list.

Make sure that you have selected the correct disk! If you choose the wrong disk, all of the files on the other disk will be deleted!

In the Volumes section, click Unmount Volume. Then click Format Volume.

In the window that pops up, choose a filesystem Type for the disk.

If you use the disk on Windows and Mac OS computers in addition to Linux computers, choose FAT. If you only use it on Windows, NTFS may be a better option. A brief description of the file system type will be presented as a label.

Give the disk a name and click Format to begin wiping the disk.

Once the formatting has finished, safely remove the disk. It should now be blank and ready to use again.

 Formatting a disk does not securely delete your files

Formatting a disk is not a completely secure way of wiping all of its data. A formatted disk will not appear to have files on it, but it is possible that special recovery software could retrieve the files. If you need to securely delete the files, you will need to use a command-line utility, such as shred.

 usr/share/help-langpack/hr/ubuntu-help/backup-why.page0000644000373100047300000000241712701706771024670 0ustar langpacklangpack00000000000000 Why, what, where and how of backups. Backups GNOME Documentation Project gnome-doc-list@gnome.org Back up your important files

Backing up your files simply means making a copy of them for safekeeping. This is done in case the original files become unusable due to loss or corruption. These copies can be used to restore the original data in the event of loss. Copies should be stored on a different device from the original files. For example, you may use a USB drive, an external hard drive, a CD/DVD, or an off-site service.

The best way to back up your files is to do so regularly, keeping the copies off-site and (possibly) encrypted.

 usr/share/help-langpack/hr/ubuntu-help/look-resolution.page0000644000373100047300000000632412701706773025766 0ustar langpacklangpack00000000000000 Change the resolution of the screen and its orientation (rotation). GNOME Documentation Project gnome-doc-list@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Michael Hill mdhillca@gmail.com Change the size or rotation of the screen

You can change how big (or how detailed) things appear on the screen by changing the screen resolution. You can change which way up things appear (for example, if you have a rotating display) by changing the rotation.

Click the icon on the very right of the menu bar and select System Settings.

Open Displays.

If you have multiple displays and they are not mirrored, you can have different settings on each display. Select a display in the preview area.

Select your desired resolution and rotation.

Click Apply. The new settings will be applied for 30 seconds before reverting back. That way, if you cannot see anything with the new settings, your old settings will be automatically restored. If you are happy with the new settings, click Keep This Configuration.

When you use another display, like a projector, it should be detected automatically so you can change its settings in the same way as your usual display. If this does not happen, just click Detect Displays.
Resolution

The resolution is the number of pixels (dots on the screen) in each direction that can be displayed. Each resolution has an aspect ratio, the ratio of the width to the height. Wide-screen displays use a 16:9 aspect ratio, while traditional displays use 4:3. If you choose a resolution that does not match the aspect ratio of your display, the screen will be letterboxed to avoid distortion.

You can choose the resolution you prefer from the Resolution drop-down list. If you choose one that is not right for your screen it may look fuzzy or pixelated.

Rotation

On some laptops, you can physically rotate the screen in many directions. It is useful to be able to change the display rotation. You can choose the rotation you want for your display from the Rotation drop-down list.

 usr/share/help-langpack/hr/ubuntu-help/documents-view.page0000644000373100047300000000276012701706771025570 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 View documents full-screen. Display documents stored locally or online

When you open Documents, all of your documents, those stored locally as well as online, are displayed as thumbnails.

In order for your Google Docs or SkyDrive documents to appear, it is necessary to configure Google or Windows Live, respectively, as an online account.

To view the contents of a document:

Click the thumbnail. The document is displayed full-width in the Documents window (or full-screen if maximized).

To exit the document, click the back arrow button.

 usr/share/help-langpack/hr/ubuntu-help/unity-dash-apps.page0000644000373100047300000000372312701706772025646 0ustar langpacklangpack00000000000000 Run, install, or uninstall apps. Jeremy Bicha jbicha@ubuntu.com Applications lens

The applications lens is the first lens after the Dash home in the lens bar. The applications lens gives you access to your applications or applications available for install.

You can use SuperA to open the Dash directly at the applications lens.

Previews

Right click on a search result to open a preview. The preview shows a short description of the application, a screenshot, its Software rating, and what version is available.

For installed applications, you can see when the application was installed and either launch the application or uninstall it. Certain essential applications cannot be uninstalled from the preview.

For applications that haven't been installed, you can install them right from the preview.

Filters

Click Filter results if you'd like to only see results for a certain type of application. You can also click SourcesLocal Applications to only view installed applications or SourcesSoftware Center to only show applications available for install.

 usr/share/help-langpack/hr/ubuntu-help/power-whydim.page0000644000373100047300000000264412701706771025253 0ustar langpacklangpack00000000000000 When your laptop is running on battery, the screen will dim when the computer is idle in order to save power. GNOME Documentation Project gnome-doc-list@gnome.org Michael Hill mdhillca@gmail.com Why does my screen go dim after a while?

When your laptop computer is running on battery, the screen will dim when the computer is idle in order to save power. When you start using the computer again, the screen will brighten.

You can stop the screen from dimming itself:

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Brightness & Lock and uncheck Dim screen to save power.

 usr/share/help-langpack/hr/ubuntu-help/printing-differentsize.page0000644000373100047300000000334212701706770027304 0ustar langpacklangpack00000000000000 Print a document on a different paper size or orientation. Phil Bull philbull@gmail.com Jim Campbell jwcampbell@gmail.com Change the paper size when printing

If you want to change the paper size of your document (for example, print a US Letter-sized PDF on A4 paper), you can change the printing format for the document.

Click FilePrint

Select the Page Setup tab.

Under the Paper column, choose your Paper size from the drop-down list.

Click Print and your document should print.

You can also use the Orientation menu to choose a different orientation:

Portrait

Landscape

Reverse portrait

Reverse landscape

 usr/share/help-langpack/hr/ubuntu-help/a11y-font-size.page0000644000373100047300000000311612701706772025303 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Use larger fonts to make text easier to read. Change text size on the screen

If you have difficulty reading the text on your screen, you can change the size of the font.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Otvorite Univerzalni pristup i odaberie Gladanje tab.

Switch Large Text to ON.

In many apps, you can increase the text size at any time by pressing Ctrl+. To reduce the text size, press Ctrl-.

usr/share/help-langpack/hr/ubuntu-help/unity-hud-intro.page0000644000373100047300000000400512701706776025675 0ustar langpacklangpack00000000000000 Use the HUD to search menus of the apps you use. Jeremy Bicha jbicha@ubuntu.com What is the HUD?

The HUD or Heads Up Display is a search-based alternative to traditional menus and was introduced in Ubuntu 12.04 LTS.

Some apps like Gimp or Inkscape have hundreds of menu items. If you're using apps like these, you may remember the name of a menu option, but you might not remember how to find it in the menus.

Using a search box can be quite a bit faster than navigating extended menu hierarchies. The HUD also can be more accessible than normal menus as some people are unable to precisely control a mouse pointer.

Use the HUD

To try the HUD:

Tap Alt to open the HUD.

Start typing.

When you see a result that you want to run, use the up and down keys to select the result, then press Enter, or click your desired search result.

If you change your mind and want to exit the HUD, tap the Alt again or the Esc. You can also click anywhere outside the HUD to close the HUD.

The HUD keeps track of your search history and adjusts the search results to be even more useful the more you use it.

 usr/share/help-langpack/hr/ubuntu-help/net-manual.page0000644000373100047300000000456312701706772024664 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com If network settings don't get assigned automatically, you may have to enter them yourself. Manually set network settings

If your network doesn't automatically assign network settings to your computer, you may have to manually enter the settings yourself. This topic assumes that you already know the correct settings to use. If not, you may need to ask your network administrator or look at the settings of your router or network switch.

To manually set your network settings:

Click the network menu on the menu bar and click Edit Connections.

Select the network connection that you want to set up manually. For example, if you plug in to the network with a cable, look at the Wired tab.

Click the connection you want to edit to select it, then click Edit.

Go to the IPv4 Settings tab and change the Method to Manual.

Click Add and type the IP address, network mask and default gateway IP address into the corresponding columns of the Addresses list. Press Enter or Tab after typing each address.

These three addresses must be IP addresses; that is, they must be four numbers separated by periods (e.g., 123.45.6.78).

Type the IP addresses of the DNS servers you want to use, separated by commas.

Click Save. If you are not connected to the network, click the network icon on the menu bar and connect. Test the network settings by trying to visit a website or look at shared files on the network, for example.

 usr/share/help-langpack/hr/ubuntu-help/shell-guest-session.page0000644000373100047300000000514412701706776026540 0ustar langpacklangpack00000000000000 Let a friend or colleague borrow your computer in a secure manner. Gunnar Hjalmarsson gunnarhj@ubuntu.com Launch a restricted guest session
Temporary session with restricted privileges

Once in a while a friend, family member, or colleague may want to borrow your computer. The Ubuntu Guest Session feature provides a convenient way, with a high level of security, to lend your computer to someone else. A guest session can be launched either from the login screen or from within a regular session. If you are currently logged in, click the icon at the far right of the menu bar and select Guest Session. This will lock the screen for your own session and start the guest session.

A guest cannot view the home folders of other users, and by default any saved data or changed settings will be removed/reset at logout. It means that each session starts with a fresh environment, unaffected by what previous guests did.

Customization

The Customize Guest Session online tutorial explains how to customize the appearance and behavior.

Disabling the feature

If you prefer to not allow guest access to your computer, you can disable the Guest Session feature. To do so, press CtrlAltT to open a terminal window, and then run this command (it's one long command, even if it may be shown wrapped on the screen - copy and paste to get it right):

sudo sh -c 'printf "[SeatDefaults]\nallow-guest=false\n" >/usr/share/lightdm/lightdm.conf.d/50-no-guest.conf'

The command creates a small configuration file. To re-enable Guest Session, simply remove that file:

sudo rm /usr/share/lightdm/lightdm.conf.d/50-no-guest.conf

 usr/share/help-langpack/hr/ubuntu-help/clock-timezone.page0000644000373100047300000000355612701706772025547 0ustar langpacklangpack00000000000000 Add other timezones so you can see what time it is in other cities. GNOME Documentation Project gnome-doc-list@gnome.org Michael Hill mdhillca@gmail.com Show other timezones

If you want to know what time it is in different cities around the world, you can add additional timezones to the clock menu. These additional cities will show up below the calendar when you click on the clock.

Click on the clock and select Date & Time Settings.

Switch to the Clock tab and select Time in other locations.

Click Choose locations.

Click + to add a location.

Fill in the Location blank with the city name you want to add. Wait a moment for a list of possible cities to show up in the drop-down list.

Select the city you want and the current time in that location will fill in automatically.

Click - to delete a city from the list.

You can also drag and drop the cities in this Locations window to change the order in which they will show up in the clock menu.

 usr/share/help-langpack/hr/ubuntu-help/files-disc-write.page0000644000373100047300000000647512701706770025777 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com Put files and documents onto a blank CD or DVD using a CD/DVD burner. Write files to a CD or DVD

You can put files onto a blank disc by using CD/DVD Creator. The option to create a CD or DVD will appear in the file manager as soon as you place the CD into your CD/DVD writer. The file manager lets you transfer files to other computers or perform backups by putting files onto a blank disc. To write files to a CD or DVD:

Place an empty disc into your CD/DVD writable drive.

In the Blank CD/DVD-R Disc window that appears, select CD/DVD Creator and click OK. The CD/DVD Creator folder window will open.

(You can also click on Blank CD/DVD-R Disc under Devices in the file manager sidebar.)

In the Disc Name field, type a name for the disc.

Drag or copy the desired files into the window.

Click Write to Disc.

Under Select a disc to write to, choose the blank disc.

(You could choose Image file instead. This will put the files in a disc image, which will be saved on your computer. You can then burn that disc image onto a blank disc at a later date.)

Click Properties if you want to adjust burning speed, the location of temporary files, and other options. The default options should be fine.

Click the Burn button to begin recording.

If Burn Several Copies is selected, you will be prompted for additional discs.

When the disc burning is complete, it will eject automatically. Choose Make More Copies or Close to exit.

For more advanced CD/DVD burning projects, try Brasero.

For help with using Brasero, read the user guide.
If the disc wasn't burned properly

Sometimes the computer doesn't record the data correctly, and you won't be able to see the files you put onto the disc when you insert it into a computer.

In this case, try burning the disc again but use a lower burning speed, e.g. 12x rather than 48x. Burning at slower speeds is more reliable. You can choose the speed by clicking the Properties button in the CD/DVD Creator window.

 usr/share/help-langpack/hr/ubuntu-help/disk-check.page0000644000373100047300000000601112701706775024621 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Michael Hill mdhillca@gmail.com Test your hard disk for problems to make sure that it's healthy. Check your hard disk for problems
Checking the hard disk

Hard disks have a built-in health-check tool called SMART (Self-Monitoring, Analysis, and Reporting Technology), which continually checks the disk for potential problems. SMART also warns you if the disk is about to fail, helping you avoid loss of important data.

Although SMART runs automatically, you can also check your disk's health by running the Disks application:

Check your disk's health using the Disks application

Open the Disks application from the Dash.

Open the Disks application from the Activities overview.

Select the disk you want to check from the Storage Devices list. Information and status of the disk will appear under Drive.

SMART Status should say "Disk is healthy".

Click the SMART Data button to view more drive information, or to run a self-test.
What if the disk isn't healthy?

Even if the SMART Status indicates that the disk isn't healthy, there may be no cause for alarm. However, it's better to be prepared with a backup to prevent data loss.

If the status says "Pre-fail", the disk is still reasonably healthy but signs of wear have been detected which mean it might fail in the near future. If your hard disk (or computer) is a few years old, you are likely to see this message on at least some of the health checks. You should backup your important files regularly and check the disk status periodically to see if it gets worse.

If it gets worse, you may wish to take the computer/hard disk to a professional for further diagnosis or repair.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless.page0000644000373100047300000000170212701706775025237 0ustar langpacklangpack00000000000000 Connect to wifi, Hidden networks, Edit connection settings, Disconnecting… The Ubuntu Documentation Team Wireless Networking usr/share/help-langpack/hr/ubuntu-help/session-screenlocks.page0000644000373100047300000000336012701706773026612 0ustar langpacklangpack00000000000000 Change how long to wait before locking the screen in the Brightness & Lock settings. GNOME Documentation Project gnome-doc-list@gnome.org Michael Hill mdhillca@gmail.com The screen locks itself too quickly

If you leave your computer for a few minutes, the screen will automatically lock itself so you have to enter your password to start using it again. This is done for security reasons (so no one can mess with your work if you leave the computer unattended), but it can be annoying if the screen locks itself too quickly.

To wait a longer period before the screen is automatically locked:

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Click Brightness & Lock.

Change the value in the Lock screen after drop-down list.

If you don't ever want the screen to lock itself automatically, switch Lock off.

 usr/share/help-langpack/hr/ubuntu-help/files-delete.page0000644000373100047300000000627212701706774025166 0ustar langpacklangpack00000000000000 Remove files or folders you no longer need. Cristopher Thomas crisnoh@gmail.com Shaun McCance shaunm@gnome.org Jim Campbell jwcampbell@gmail.com Michael Hill mdhillca@gmail.com Delete files and folders

If you don't want a file or folder any more, you can delete it. When you delete an item it is moved to the Trash folder, where it is stored until you empty the trash. You can restore items in the Trash folder to their original location if you decide you need them, or if they were accidentally deleted.

To send a file to the trash:

Select the item you want to place in the trash by clicking it once.

Press Delete on your keyboard. Alternatively, drag the item to the Trash in the sidebar.

To delete files permanently, and free up disk space on your computer, you need to empty the trash. To empty the trash, right-click Trash in the sidebar and select Empty Trash.

Permanently delete a file

You can immediately delete a file permanently, without having to send it to the trash first.

To permanently delete a file:

Select the item you want to delete.

Press and hold the Shift key, then press the Delete key on your keyboard.

Because you cannot undo this, you will be asked to confirm that you want to delete the file or folder.

If you frequently need to delete files without using the trash (for example, if you often work with sensitive data), you can add a Delete entry to the right-click menu for files and folders. Click Files in the menu bar, pick Preferences and select the Behavior tab. Select Include a Delete command that bypasses Trash.

Deleted files on a removable device may not be visible on other operating systems, such Windows or Mac OS. The files are still there, and will be available when you plug the device back into your computer.
usr/share/help-langpack/hr/ubuntu-help/contacts-search.page0000644000373100047300000000346412701706775025706 0ustar langpacklangpack00000000000000 Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com Search for a contact. Search for a contact

You can search for an online contact in one of two ways:

In the Activities overview, start typing the name of the contact.

Matching contacts will appear in the overview instead of the usual list of applications.

Press Enter to select the contact at the top of the list or click the contact that you want to select if they are not at the top.

To search from inside Contacts:

Click inside the search field.

Start typing the name of the contact.

 usr/share/help-langpack/hr/ubuntu-help/net-wireless-find.page0000644000373100047300000000420212701706771026147 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org The wireless could be turned off or broken, there might be too many wireless networks nearby, or you might be out of range. I can't see my wireless network in the list

There are a number of reasons why you might not be able to see your wireless network on the list of networks which appears when you click the network icon on the menu bar.

If no networks are shown in the list, your wireless hardware could be turned off, or it may not be working properly. Make sure it is turned on.

If there are lots of wireless networks nearby, the network you are looking for might not be on the first page of the list. If this is the case, look at the bottom of the list for an arrow pointing towards the right and hover your mouse over it to display the rest of the wireless networks.

You could be out of range of the network. Try moving closer to the wireless base station/router and see if the network appears in the list after a while.

The list of wireless networks takes time to update. If you have just turned on your computer or moved to a different location, wait for a minute or so and then check if the network has appeared in the list.

The network could be hidden. You need to connect in a different way if it is a hidden network.

 usr/share/help-langpack/hr/ubuntu-help/clock-more-info.page0000644000373100047300000000364012701706776025606 0ustar langpacklangpack00000000000000 Choose to show additional information such as the date or day of the week. Ubuntu Documentation Project ubuntu-doc@lists.ubuntu.com Change how much information is shown in the clock

By default, Ubuntu only shows the time in the clock. You can set the clock to show additional information if you choose.

Click on the clock and select Date & Time Settings. Switch to the Clock tab. Select the time and date options you want to display.

You can also turn the clock off entirely by unchecking Show a clock in the menu bar.

If you later change your mind, you can get the clock back by clicking the icon in the very right of the menu bar and selecting System Settings. In the System section, click Time & Date.
Change the date format

You can also change the clock's date format to match the preferred standard for your location.

Click the icon at the very right of the menu bar and select System Settings.

In the Personal section, click Language Support.

Switch to the Regional Formats tab.

Select your preferred location in the dropdown list.

You will need to log out and log back in for this change to take effect.
usr/share/help-langpack/hr/ubuntu-help/wacom-left-handed.page0000644000373100047300000000250412701706776026077 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Switch the Wacom tablet to Left-Handed Orientation. Use the tablet left-handed

Some tablets have hardware buttons on one side. The tablet can be rotated 180 degrees to position these buttons for left-handed people. To switch the orientation to left-handed:

Click the icon at the far right of the menu bar and select System Settings.

Open Wacom Graphics Tablet.

If no tablet is detected, you'll be asked to Please plug in or turn on your Wacom tablet.

Switch Left-Handed Orientation to ON.

 usr/share/help-langpack/hr/ubuntu-help/display-dual-monitors-desktop.page0000644000373100047300000000417212701706767030532 0ustar langpacklangpack00000000000000 Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com 2013 Set up dual monitors on your desktop computer. Connect an extra monitor

To set up a second monitor with your desktop computer, connect the monitor. If your system doesn't recognize it immediately, or you would like to adjust the settings:

Click your name on the menu bar and select System Settings.

Open Displays.

Click on the image of the monitor you would like to activate or deactivate, then switch it ON/OFF.

The monitor with the menu bar is the main monitor. To change which monitor is "main", click on the top bar and drag it over to the monitor you want to set as the "main" monitor.

To change the "position" of a monitor, click on it and drag it to the desired position.

If you would like both monitors to display the same content, check the Mirror displays box.

When you are happy with your settings, click Apply and then click Keep This Configuration.

To close the Displays click on the x in the top corner.

usr/share/help-langpack/hr/ubuntu-help/bluetooth-visibility.page0000644000373100047300000000266212701706775027016 0ustar langpacklangpack00000000000000 Whether or not other devices can discover your computer. Shaun McCance shaunm@gnome.org What is Bluetooth visibility?

Bluetooth visibility simply refers to whether other devices can discover your computer when searching for Bluetooth devices. When Bluetooth visibility is turned on, your computer will advertise itself to all other devices within range, allowing them to attempt to connect to you.

Your computer does not need to be visible to search for other devices, but those devices need to be visible for your computer to discover them.

After you have connected to a device, neither your computer nor the device needs to be visible to communicate with each other.

Unless you or someone you trust needs to connect to your computer from another device, you should leave visibility off.

 usr/share/help-langpack/hr/ubuntu-help/mouse-wakeup.page0000644000373100047300000000235212701706772025237 0ustar langpacklangpack00000000000000 If you have to wiggle or click the mouse before it responds. GNOME Documentation Project gnome-doc-list@gnome.org Mouse reacts with delay before it starts working

Wireless and optical mice, as well as touchpads on laptops, may need to "wake up" before they start working. They automatically go to sleep when not in use to save battery power. To wake up your mouse or touchpad, you can click on a mouse button or wiggle the mouse.

Laptop touchpads sometimes react with delay after you stop typing before they start working. This is to prevent you from accidentally touching the touchpad with your palm while typing. See for details.

 usr/share/help-langpack/hr/ubuntu-help/unity-introduction.page0000644000373100047300000000521712701706773026510 0ustar langpacklangpack00000000000000 A visual introduction to the Unity desktop. Shaun McCance shaunm@gnome.org Jim Campbell jwcampbell@gmail.com Welcome to Ubuntu

Ubuntu features Unity, a reimagined way to use your computer. Unity is designed to minimize distractions, give you more room to work, and help you get things done.

This guide is designed to answer your questions about using Unity and your Ubuntu desktop. First we will take a moment to look at some of Unity's key features, and how you can use them.

Getting started with Unity

The Unity desktop
The Launcher

The Launcher

The Launcher appears automatically when you log in to your desktop, and gives you quick access to the applications you use most often.

Learn more about the Launcher.
The Dash

The Ubuntu Button sits near the top left corner of the screen and is always the top item in the Launcher. If you click the Ubuntu Button, Unity will present you with an additional feature of the desktop, the Dash.

The Unity Dash

The Dash is designed to make it easier to find, open, and use applications, files, music, and more. For example, if you type the word "document" into the Search Bar, the Dash will show you applications that help you write and edit documents. It will also show you relevant folders and documents that you have been working on recently.

Learn more about the Dash.
usr/share/help-langpack/hr/ubuntu-help/color-canshareprofiles.page0000644000373100047300000000334312701706767027266 0ustar langpacklangpack00000000000000 Sharing color profiles is never a good idea as hardware changes over time. Richard Hughes richard@hughsie.com Can I share my color profile?

Color profiles that you have created yourself are specific to the hardware and lighting conditions that you calibrated for. A display that has been powered for a few hundred hours is going to have a very different color profile to a similar display with the next serial number that has been lit for a thousand hours.

This means if you share your color profile with somebody, you might be getting them closer to calibration, but it's misleading at best to say that their display is calibrated.

Similarly, unless everyone has recommended controlled lighting (no sunlight from windows, black walls, daylight bulbs etc.) in a room where viewing and editing images takes place, sharing a profile that you created in your own specific lighting conditions doesn't make a lot of sense.

You should carefully check the redistribution conditions for profiles downloaded from vendor websites or that were created on your behalf.

usr/share/help-langpack/hr/ubuntu-help/session-language.page0000644000373100047300000000641112701706770026057 0ustar langpacklangpack00000000000000 Switch to a different language for user interface and help text. GNOME Documentation Project gnome-doc-list@gnome.org Shaun McCance shaunm@gnome.org Andre Klapper ak-47@gmx.net Michael Hill mdhillca@gmail.com Ubuntu Documentation Team Change which language you use

You can use your desktop and applications in any of dozens of languages, provided you have the proper language packs installed on your computer.

Click the icon at the very right of the menu bar and select System Settings.

Click Language Support.

Select your desired language on the Language tab. Drag the language to the top of the list.

You have to log out and back in for language changes to take effect. Click the icon at the very right of the menu bar and select Log Out to log out.

Some translations may be incomplete, and certain applications may not support your language at all.

There are some special folders in your home folder where applications can store things like music, pictures, and documents. These folders use standard names according to your language. When you log back in, you will be asked if you want to rename these folders to the standard names for your selected language. If you plan to use the new language all the time, you should update the folder names.

Change the system language

When you change your language, you only change it for your account after you log in. You can also change the system language, the language used in places like the login screen.

Change your language, as described above.

Click Apply System-Wide.

Administrative privileges are required. Enter your password, or the password for the requested administrator account.

You can find more detailed guidance on languages and regional formats in Language Support Help.
usr/share/help-langpack/hr/ubuntu-help/user-goodpassword.page0000644000373100047300000001040112701706770026274 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Phil Bull philbull@gmail.com Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com Use longer, more complicated passwords. Choose a secure password

Make your passwords easy enough for you to remember, but very difficult for others (including computer programs) to guess.

Choosing a good password will help to keep your computer safe. If your password is easy to guess, someone may figure it out and gain access to your personal information.

People could even use computers to systematically try to guess your password, so even one that would be difficult for a human to guess might be extremely easy for a computer program to crack. Here are some tips for choosing a good password:

Use a mixture of upper-case and lower-case letters, numbers, symbols, and spaces in the password. This makes it more difficult to guess. There are more symbols to choose from, so more possible passwords would have to be checked by someone when trying to guess yours.

A good method for choosing a password is to take the first letter of each word in a phrase that you can remember. The phrase could be the name of a movie, a book, a song, or an album. For example, "Flatland: A Romance of Many Dimensions" would become F:ARoMD or faromd or f: aromd.

Make your password as long as possible. The more characters it contains, the longer it should take for a person or computer to guess it.

Do not use any words that appear in a standard dictionary in any language. Password crackers will try these first. The most common password is "password" -- people can guess passwords like this very quickly!

Do not use any personal information, such as a date, license plate number, or any family member's name.

Do not use any nouns.

Choose a password that can be typed quickly, to reduce the chance of someone being able to make out what you have typed if they happen to be watching you.

Never write your passwords down anywhere. They can be found!

Use different passwords for different things.

Use different passwords for different accounts.

If you use the same password for all of your accounts, anyone who guesses it will be able to access all of your accounts immediately.

It can be difficult to remember lots of passwords. Though not as secure as using a different passwords for everything, it may be easier to use the same one for things that don't matter (like websites), and different ones for important things (like your online banking account and your email).

Change your passwords regularly.

usr/share/help-langpack/hr/ubuntu-help/unity-launcher-menu.page0000644000373100047300000000316712701706773026534 0ustar langpacklangpack00000000000000 Stephen M. Webb stephen@ubuntu.com Right clicking a Launcher Icon reveals a menu of actions. The Launcher Icon Menus

Right clicking on a Launcher icon will reveal a menu of actions. The actions available depend on whether the icon is locked to the launcher or not, if the icon is for an application whether it's running or not, and on the specific icon itself. Available actions can include the following.

launching the application or opening the document, folder, or device

unlocking the icon from the Launcher if it was previously locked (see )

locking the icon to the Launcher if it was previously not locked (see )

quitting the application if it's running

switching between application instances or windows if there is more than one instance or window

application-specific shortcuts such as open a new document or window

 usr/share/help-langpack/hr/ubuntu-help/nautilus-display.page0000644000373100047300000000456012701706773026130 0ustar langpacklangpack00000000000000 Control icon captions used in the file manager. Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Ubuntu Documentation Team ubuntu-doc@lists.ubuntu.com File manager display preferences

You can control how the file manager displays captions under icons. Click Edit in the menu bar, pick Preferences and select the Display tab.

Icon captions

File manager icons with captions

When you use icon view, you can choose to have extra information about files and folders displayed in a caption under each icon. This is useful, for example, if you often need to see who owns a file or when it was last modified.

You can zoom in a folder by clicking the View Zoom In or press Ctrl+. As you zoom in, the file manager will display more and more information in captions. You can choose up to three things to show in captions. The first will be displayed at most zoom levels. The last will only be shown at very large sizes.

If you have a file manager window open, you may have to reload for icon caption changes to take effect. Click ViewReload or press CtrlR.
usr/share/help-langpack/hr/ubuntu-help/nautilus-prefs.page0000644000373100047300000000116612701706774025602 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org File manager preferences usr/share/help-langpack/hr/ubuntu-help/bluetooth-send-file.page0000644000373100047300000001133112701706771026462 0ustar langpacklangpack00000000000000 Share files to Bluetooth devices such as your phone. Jim Campbell jwcampbell@gmail.com Paul W. Frields stickster@gmail.com Michael Hill mdhillca@gmail.com Send a file to a Bluetooth device

You can send files to connected Bluetooth devices, such as some mobile phones or other computers. Some types of devices don't allow the transfer of files, or specific types of files. You can send files in one of three ways: using the Bluetooth icon in the menu bar, from the Bluetooth settings window, or directly from the file manager.

You can send files to connected Bluetooth devices, such as some mobile phones or other computers. Some types of devices don't allow the transfer of files, or specific types of files. You can send files using the Bluetooth icon on the top bar, or from the Bluetooth settings window.

To send files directly from the file manager, see .

Before you begin, make sure Bluetooth is enabled on your computer. See .

 Send files using the Bluetooth icon

Click the Bluetooth icon in the menu bar and select Send Files to Device.

Click the Bluetooth icon on the top bar and select Send Files to Device.

Choose the file you want to send and click Select.

To send more than one file in a folder, hold down Ctrl as you select each file.

Select the device which you want to send the files to and click Send.

The list of devices will show both devices you are already connected to as well as visible devices within range. If you have not already connected to the selected device, you will be prompted to pair with the device after clicking Send. This will probably require confirmation on the other device.

If there are many devices, you can limit the list to only specific device types using the Device type drop-down.

The owner of the receiving device usually has to press a button to accept the file. Once the owner accepts or declines, the result of the file transfer will be shown on your screen.

 Send files from the Bluetooth settings

Click the Bluetooth icon in the menu bar and select Bluetooth Settings.

Click the Bluetooth icon on the top bar and select Bluetooth Settings.

Select the device to send files to from the list on the left. The list only shows devices you've already connected to. See .

In the device information on the right, click Send Files.

Choose the file you want to send and click Select.

To send more than one file in a folder, hold down Ctrl as you select each file.

The owner of the receiving device usually has to press a button to accept the file. Once the owner accepts or declines, the result of the file transfer will be shown on your screen.

 usr/share/help-langpack/hr/ubuntu-help/contacts-link-unlink.page0000644000373100047300000000516712701706767026677 0ustar langpacklangpack00000000000000 Tiffany Antopolski tiffany.antopolski@gmail.com Michael Hill mdhillca@gmail.com Ekaterina Gerasimova kittykat3756@gmail.com Combine information for a contact from multiple sources. Link and unlink contacts usr/share/help-langpack/hr/ubuntu-help/wacom-multi-monitor.page0000644000373100047300000000267412701706772026547 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Map the Wacom tablet to a specific monitor. Choose a monitor

Click the icon at the far right of the menu bar and select System Settings.

Open Wacom Graphics Tablet.

If no tablet is detected, you'll be asked to Please plug in or turn on your Wacom tablet.

Click Map to Monitor…

Check Map to single monitor.

Next to Output, select the monitor you wish to receive input from your graphics tablet.

Only the monitors that are configured will be selectable.

Click Close.

 usr/share/help-langpack/hr/ubuntu-help/keyboard-cursor-blink.page0000644000373100047300000000317012701706767027030 0ustar langpacklangpack00000000000000 Make the insertion point blink and control how quickly it blinks. Shaun McCance shaunm@gnome.org Natalia Ruz Leiva nruz@alumnos.inf.utfsm.cl Julita Inca yrazes@gmail.com Michael Hill mdhillca@gmail.com Make the keyboard cursor blink

If you find it difficult to see the keyboard cursor in a text field, you can make it blink to make it easier to locate.

Click the icon at the far right of the menu bar and select System Settings.

In the Hardware section, click Keyboard.

Select Cursor blinks in text fields.

Use the Speed slider to adjust how quickly the cursor blinks.

 usr/share/help-langpack/hr/ubuntu-help/printing-paperjam.page0000644000373100047300000000243512701706775026251 0ustar langpacklangpack00000000000000 How you clear a paper jam will depend on the make and model of printer that you have. Jim Campbell jwcampbell@gmail.com Clearing a paper jam

Sometimes printers incorrectly feed sheets of paper and get jammed.

The manual for your printer will usually provide detailed instructions on how to clear paper jams. Usually, you will need to open one of the printer's panels to find the jam inside and then firmly (but carefully!) pull the jammed paper out of the printer's feeding mechanism.

Once the jam has been cleared you may need to press the printer's Resume button to start printing again. With some printers, you may even need to turn the printer off and then on again, and then start the print job again.

 usr/share/help-langpack/hr/ubuntu-help/hardware-cardreader.page0000644000373100047300000000516712701706767026517 0ustar langpacklangpack00000000000000 Troubleshoot media card readers GNOME Documentation Project gnome-doc-list@gnome.org Media card reader problems

Many computers contain readers for SD (Secure Digital), MMC (MultiMediaCard), SmartMedia, Memory Stick, CompactFlash, and other storage media cards. These should be automatically detected and mounted. Here are some troubleshooting steps if they are not:

Make sure that the card is put in correctly. Many cards look as though they are upside down when correctly inserted. Also make sure that the card is firmly seated in the slot; some cards, especially CompactFlash, require a small amount of force to insert correctly. (Be careful not to push too hard! If you come up against something solid, do not force it.)

Open Files by using the Dash. Does the inserted card appear in the Devices list in the left sidebar? Sometimes the card appears in this list but is not mounted; click it once to mount. (If the sidebar is not visible, press F9 or click View Sidebar Show Sidebar.)

If your card does not show up in the sidebar, click GoComputer. If your card reader is correctly configured, the reader should come up as a drive when no card is present, and the card itself when the card has been mounted (see the picture below).

If you see the card reader but not the card, the problem may be with the card itself. Try a different card or check the card on a different reader if possible.

If no cards or drives are available in the Computer folder, it is possible that your card reader does not work with Linux due to driver issues. If your card reader is internal (inside the computer instead of sitting outside) this is more likely. The best solution is to directly connect your device (camera, cell phone, etc.) to a USB port on the computer. USB external card readers are also available, and are far better supported by Linux.

 usr/share/help-langpack/hr/ubuntu-help/unity-dash-video.page0000644000373100047300000000252612701706776026015 0ustar langpacklangpack00000000000000 Find and play videos from your computer or the internet. Jeremy Bicha jbicha@ubuntu.com Video lens

The video lens is the third lens after the Dash home on the lens bar and is represented by a film strip. The video lens gives you access to your videos or videos available online.

You can even buy or rent videos from the Dash.

You can use SuperV to open the Dash directly at the video lens.

Previews

Right click on a search result to open a preview with more information about the video.

Filters

Click Filter results to filter by video source.

 usr/share/help-langpack/hr/ubuntu-help/wacom-mode.page0000644000373100047300000000331112701706775024644 0ustar langpacklangpack00000000000000 Michael Hill mdhillca@gmail.com 2012 Switch the tablet between tablet mode and mouse mode. Set the Wacom tablet's tracking mode

Tracking Mode determines how the pointer is mapped to the screen.

Click the icon at the far right of the menu bar and select System Settings.

Open Wacom Graphics Tablet.

If no tablet is detected, you'll be asked to Please plug in or turn on your Wacom tablet.

Next to Tracking Mode, select Tablet (absolute) or Touchpad (relative).

In absolute mode, each point on the tablet maps to a point on the screen. The top left corner of the screen, for instance, always corresponds to the same point on the tablet.

In relative mode, if you lift the pointer off the tablet and put it down in a different position, the cursor on the screen doesn't move. This is the way a mouse operates, allowing you to cover distances on the screen with less hand movement.

 usr/share/help-langpack/hr/ubuntu-help/prefs-language.page0000644000373100047300000000225612701706771025517 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Ubuntu Documentation Team Install languages, change language, region and formats, input sources… Region & Language
Language Support
Text Entry
usr/share/help-langpack/hr/ubuntu-help/shell-keyboard-shortcuts.page0000644000373100047300000001235212701706775027562 0ustar langpacklangpack00000000000000 Get around the desktop using the keyboard. Shaun McCance shaunm@gnome.org 2012 Useful keyboard shortcuts

This page provides an overview of keyboard shortcuts that can help you use your desktop and applications more efficiently. If you cannot use a mouse or pointing device at all, see for more information on navigating user interfaces with only the keyboard.

Getting around the desktop

AltF4

Close the current window.

AltF2

Pop up command window (for quickly running commands)

AltTab

Quickly switch between windows. Hold down Shift for reverse order.

Alt`

Switch between windows from the same application, or from the selected application after AltTab.

This shortcut uses ` on US keyboards, where the ` key is above Tab. On all other keyboards, the shortcut is Alt plus whatever key is above Tab.

SuperS

Activate the workspace switcher. Zoom out on all workspaces.

SuperW

Activate "Expo" mode. Show all windows from current workspace.

CtrlAltArrow keys

Switch between workspaces.

CtrlAltShiftArrow keys

Move the current window to a different workspace.

CtrlAltDelete

Log out.

CtrlSuperD

Hide all windows and show the desktop. Press the keys again to restore your windows.

CtrlAltL

Lock the screen.
Common editing shortcuts

CtrlA

Select all text or items in a list.

CtrlX

Cut (remove) selected text or items and place it on the clipboard.

CtrlC

Copy selected text or items to the clipboard.

CtrlV

Paste the contents of the clipboard.

CtrlZ

Undo the last action.
Capturing from the screen

Print Screen

Take a screenshot.

AltPrint Screen

Take a screenshot of a window.

ShiftPrint Screen

Take a screenshot of an area of the screen. The pointer changes to a crosshair. Click and drag to select an area.
usr/share/help-langpack/hr/ubuntu-help/bluetooth-connect-device.page0000644000373100047300000000745212701706771027513 0ustar langpacklangpack00000000000000 Pair Bluetooth devices. Jim Campbell jwcampbell@gmail.com Paul W. Frields stickster@gmail.com Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Connect your computer to a Bluetooth device

Before you can use a Bluetooth device like a mouse or a headset, you first need to connect your computer to the device. This is also called pairing the Bluetooth devices.

Before you begin, make sure Bluetooth is enabled on your computer. See .

Click the Bluetooth icon in the menu bar and select Set Up New Device.

Click the Bluetooth icon on the top bar and select Set up a New Device.

Make the other Bluetooth device discoverable or visible and place it within 10 meters (about 33 feet) of your computer. Click Continue. Your computer will begin searching for devices.

If there are too many devices listed, use the Device type drop-down to display only a single type of device in the list.

Click PIN options to set how a PIN will be delivered to the other device.

The automatic PIN setting will use a six-digit numerical code. A device with no input keys or screen, such as a mouse or headset, may require a specific PIN such as 0000, or no PIN at all. Check your device's manual for the proper setting.

Choose an appropriate PIN setting for your device, then click Close.

Click Continue to proceed. If you did not choose a preset PIN, the PIN will be displayed on the screen.

If required, confirm the PIN on your other device. The device should show you the PIN you see on your computer screen, or may prompt you to enter the PIN. Confirm the PIN on the device, then click Matches.

You need to finish your entry within about 20 seconds on most devices, or the connection will not be completed. If that happens, return to the device list and start again.

A message appears when the connection successfully completes. Click Close.

You can remove a Bluetooth connection later if desired.

To control access to your shared files, refer to the Bluetooth Sharing settings. See .

 usr/share/help-langpack/hr/ubuntu-help/music-player-ipodtransfer.page0000644000373100047300000000406112701706772027724 0ustar langpacklangpack00000000000000 GNOME Documentation Project gnome-doc-list@gnome.org Use a media player to copy the songs and safely remove the iPod afterward. Songs don't appear on my iPod when I copy them onto it

When you plug an iPod into your computer, it will appear in your music player application and also in the file manager (the Files application in the Launcher). You must copy songs onto the iPod using the music player - if you copy them across using the file manager, it won't work because the songs won't be put into the right location. iPods have a special location for storing songs that music player applications know how to get to but the file manager does not.

You also need to wait for the songs to finish copying to the iPod before you unplug it. Before unplugging the iPod, make sure you choose to safely remove it. This will make sure that all of the songs have been copied across properly.

A further reason why songs might not be appearing on your iPod is that the music player application you're using does not support converting the songs from one audio format to another. If you copy a song which is saved in an audio format that is not supported by your iPod (for example, an Ogg Vorbis (.oga) file), the music player will try to convert it to a format that the iPod does understand, such as MP3. If the appropriate conversion software (also called a codec or encoder) is not installed, the music player will not be able to do the conversion and so will not copy the song. Look in the software installer for an appropriate codec.

 usr/share/help-langpack/hr/ubuntu-help/a11y-contrast.page0000644000373100047300000000307612701706771025226 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Make windows and buttons on the screen more (or less) vivid, so they're easier to see. Prilagodite kontrast

You can adjust the contrast of windows and buttons so that they're easier to see. This is not the same as changing the brightness of the whole screen; only parts of the user interface will change.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Otvorite Univerzalni pristup i odaberie Gladanje tab.

Switch High Contrast to ON.

usr/share/help-langpack/hr/ubuntu-help/addremove-sources.page0000644000373100047300000000707612701706772026254 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Add other repositories to extend the software sources Ubuntu uses for installation and upgrades. Add additional software repositories

Software is available from third-party sources, as well as from the default Ubuntu software repositories. If you want to install software from a third-party software repository, you must add it to Ubuntu's list of available repositories.

Only add software repositories from sources that you trust!

Third-party software repositories are not checked for security or reliability by Ubuntu members, and may contain software which is harmful to your computer.

Install other repositories

Click on the Software icon in the Launcher, or search for Software in the search bar of the Dash.

When Software launches, click Software & Updates

You will be asked to enter your password. Once you have done that, switch to the Other Software tab.

Click Add and enter the APT line for the repository. This should be available from the website of the repository, and should look similar to:

deb http://archive.ubuntu.com/ubuntu/ xenial main

Click Add Source then close the Software & Updates window. Software will then check your software sources for new updates.

Activate the Canonical Partner repository

The Canonical Partner repository offers some proprietary applications that don't cost any money to use but are closed source. They include software like Skype, Adobe Reader and Adobe Flash Plugin. Software in this repository will appear in Software search results but won't be installable until this repository is enabled.

To enable the repository, follow the steps above to open the Other Software tab in Software & Updates. If you see the Canonical Partners repository in the list, make sure it is checked then close the Software & Updates window. If you don't see it, click Add and enter:

deb http://archive.canonical.com/ubuntu xenial partner

Click Add Source then close the Software & Updates window. Wait a moment for Software to download the repository information.

usr/share/help-langpack/hr/ubuntu-help/more-help.page0000644000373100047300000000146712701706770024511 0ustar langpacklangpack00000000000000 Tiffany Antopolski tiffany.antopolski@gmail.com Jim Campbell jwcampbell@gmail.com Tips on using this guide, help improve this guide… Get more help

usr/share/help-langpack/hr/ubuntu-help/net-fixed-ip-address.page0000644000373100047300000000452412701706775026537 0ustar langpacklangpack00000000000000 Jim Campbell jwcampbell@gmail.com Using a static IP address can make it easier to provide some network services from your computer. Create a connection with a fixed IP address

Most networks will automatically assign an IP address and other details to your computer when you connect to the network. These details can change periodically, but you might want to have a fixed IP address for the computer so you always know what its address is (for example, if it is a file server).

To give your computer a fixed (static) IP address:

Click the network menu on the menu bar and select Edit Connections.

Select the Wired connection on the Wired tab or your WiFi network on the Wireless tab and click Edit.

Click on the IPv4 Settings tab and change the Method to Manual.

If no connection information is listed in the Addresses list, or if you want to set up a new connection, click Add.

Enter the IP Address, Netmask, and Gateway information into the appropriate boxes. How you choose these will depend on your network setup; there are specific rules governing which IP addresses and netmasks are valid for a given network.

If necessary, enter a Domain Name Server address into the DNS servers box. This is the IP address of a server which looks up domain names; most corporate networks and internet providers have dedicated DNS servers.

Click Save. The network connection should now have a fixed IP address.

 usr/share/help-langpack/hr/ubuntu-help/user-admin-change.page0000644000373100047300000000406612701706772026110 0ustar langpacklangpack00000000000000 You can change which users are allowed to make changes to the system by giving them administrative privileges. GNOME Documentation Project gnome-doc-list@gnome.org Change who has administrative privileges

Administrative privileges are a way of deciding who can make changes to important parts of the system. You can change which users have admin privileges and which ones don't. They are a good way of keeping your system secure and preventing potentially damaging unauthorized changes.

Click the icon at the far right of the menu bar and select System Settings.

Open User Accounts.

Click Unlock and enter your password to unlock the account settings. (To give a user admin privileges, you must have admin privileges yourself.)

Select the user whose privileges you want to change.

Click the label Standard next to Account type and select Administrator.

Close the User Accounts window. The user's privileges will be changed when they next log in.

The first user account on the system has admin privileges. This is the user account that was created when you first installed the system.

It is unwise to have too many users with Administrator privileges on one system.

 usr/share/help-langpack/hr/ubuntu-help/net-chat-social.page0000644000373100047300000000352112701706771025566 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Post to Twitter, Facebook and other social networking sites directly from your desktop Social networking from the desktop

With Ubuntu you can post to your favorite social networking sites from your desktop. Ubuntu uses the Friends scope to allow you to organize your social networking sites in one place, and to post updates from the Me Menu without opening any website.

To set up your social networking accounts:

Open the System menu on the right hand side of the menu bar and select "System Settings...".

Choose Online accounts

Choose the social networking site you want to set up and click Add Account...

Click Authorize and insert your account settings for that site, and follow the instructions

You can now view your social networking messages from the Messaging menu on the right hand side of the menu bar, in the Broadcast section. Click on any of the items in that section to open Friends scope and to read or post messages to your social network.

usr/share/help-langpack/hr/ubuntu-help/power-batteryslow.page0000644000373100047300000000201512701706773026323 0ustar langpacklangpack00000000000000 Some laptops intentionally slow down when they are running on battery. GNOME Documentation Project gnome-doc-list@gnome.org Why is my laptop slow when it is on battery?

Some laptops intentionally slow down when they are running on battery in order to conserve power. The processor (CPU) in the laptop switches to a slower speed, and processors use less power when running slower, so the battery should last longer.

This feature is called CPU frequency scaling.

 usr/share/help-langpack/hr/ubuntu-help/documents-previews.page0000644000373100047300000000272212701706767026465 0ustar langpacklangpack00000000000000 Julita Inca yrazes@gmail.com 2012 Michael Hill mdhillca@gmail.com 2012 You can only preview files stored locally. Why don't some files have previews?

When you open Documents, a preview thumbnail is displayed for documents that are stored locally. Those stored on a remote server like Google Docs or SkyDrive show as missing (or blank) preview thumbnails.

If you download a Google Docs or SkyDrive document to local storage, a thumbnail will be generated.

The local copy of a document downloaded from Google Docs or SkyDrive will lose its ability to be updated online. If you want to continue to edit it online, it is better not to download it.

 usr/share/help-langpack/hr/ubuntu-help/accounts-which-application.page0000644000373100047300000000654012701706776030044 0ustar langpacklangpack00000000000000 Baptiste Mille-Mathias baptistem@gnome.org 2012-2013 Michael Hill mdhillca@gmail.com Andre Klapper ak-47@gmx.net Greg Beam ki7mt@yahoo.com Applications can use the accounts created in Online Accounts and the services they exploit. Which applications take advantage of online accounts?

Online Accounts can be used by external applications to automatically configure themselves.

With a Google account

Evolution, the email application. Your email account will be added to Evolution automatically, so it will retrieve your mail, give you access to your contacts, and display your calendar items in your Google agenda.

Empathy, the instant messaging application. Your online account will be added and you will be able to communicate with your friends.

Contacts, which will allow to see and edit your contacts.

Documents can access your online documents and display them.

With Windows Live, Facebook or Twitter accounts

Empathy can use these accounts to connect you online and chat with your contacts, friends, and followers.

With a SkyDrive account

Documents can access your online documents in Microsoft SkyDrive and display them.

With a Exchange account

Once you have created an Exchange account, Evolution will start retrieving mails from this account.

With a ownCloud account

When an ownCloud account is set up, Evolution is able to access and edit contacts and calendar appointments.

Files and other applications will be able to list and access your online files stored in the ownCloud installation.

usr/share/help-langpack/hr/ubuntu-help/index.page0000644000373100047300000000353712701706774023734 0ustar langpacklangpack00000000000000 Ubuntu Desktop Guide Ubuntu Desktop Guide <media type="image" mime="image/png" width="16" height="16" src="figures/ubuntu-logo.png">Help</media> Ubuntu Desktop Guide <media type="image" src="figures/ubuntu-logo.png">Ubuntu Logo</media> Ubuntu Desktop Guide usr/share/help-langpack/hr/ubuntu-help/printing.page0000644000373100047300000000260512701706772024450 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Local setup, order and collate, two-sided and multi-page… Printing
Setup Set up a printer
Sizes and layouts Different paper sizes and layouts
Undetected printers, paper jams, print-outs that look wrong… Printer problems
usr/share/help-langpack/hr/ubuntu-help/addremove-remove.page0000644000373100047300000000342212701706771026054 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Remove software that you no longer use. Remove an application

Software helps you to remove software that you no longer use.

Click the Software icon in the Launcher or search for Software in the Dash.

When Software opens, click the Installed button at the top.

Find the application that you want to remove by using the search box or by looking through the list of installed applications.

Select the application and click Remove.

You may be asked to enter your password. After you have done that, the application will be removed.

Some applications depend on other applications to work properly. If you try to remove an application that is needed by another application, both will be removed. You will be asked to confirm whether you want this to happen before the applications are removed.

usr/share/help-langpack/hr/ubuntu-help/unity-menubar-intro.page0000644000373100047300000001302312701706775026545 0ustar langpacklangpack00000000000000 The menu bar is the dark strip on the top of your screen. Ubuntu Documentation Team Manage apps & settings with the menu bar

The menu bar is the dark strip on the top of your screen. It contains the window management buttons, the app menus, and the status menus.

Window management buttons

The window management buttons are on the top left corner of windows. When maximized, the buttons are in the top left of the screen. Click the buttons to close, minimize, maximize or restore windows.

App menus

The app menus are by default located to the right of the window management buttons. Unity hides the app menus and the window management buttons unless you move your mouse pointer to the top left of the screen or press AltF10. This feature enables you to see more of your content at once, which is especially valuable on small screens like netbooks.

If you want, you can change the default behavior to having your menus attached to the window title bar of respective application instead of the menu bar, and setting the visibility to always displayed instead of only displayed on mouse hovering.

Click the system menu at the very right of the menu bar and select System Settings.

In the Personal section, click Appearance and choose the Behavior tab.

Under Show the menus for a window, select In the window's title bar.

Under Menus visibility, select Always displayed.
Status menus

Ubuntu has several different status menus (sometimes referred to as indicators) on the right side of the menu bar. The status menus are a convenient place where you can check and modify the state of your computer and applications.

List of status menus and what they do

Network menu Offline network icon

Connect to wired, wireless, mobile, and VPN networks.

Input source menu Input source icon

Select keyboard layout/input source, configure input sources.

Bluetooth menu Bluetooth icon

Send or receive files by Bluetooth. This menu is hidden if a supported Bluetooth device isn't detected.

Messaging menu Message icon

Easily launch and receive incoming notifications from messaging applications including email, social networking, and Internet chat.

Battery menu Battery icon

Check your laptop battery's charging status. This menu is hidden if a battery isn't detected.

Sound menu Volume icon

Set the volume, configure sound settings, and control media players like Rhythmbox.

Clock

Access the current time and date. Appointments from the built in Calendar application can also display here.

System menu Power cog icon

Access details about your computer, this help guide, and system settings. Switch users, lock screen, log out, suspend, restart or shutdown your computer.

Some of the icons used by the indicator menus change according to the status of the application.

Other programs such as Tomboy or Transmission can also add indicator menus to the panel.
usr/share/help-langpack/hr/ubuntu-help/color-assignprofiles.page0000644000373100047300000000420212701706767026761 0ustar langpacklangpack00000000000000 Look in System SettingsColor for the option to change this. Richard Hughes richard@hughsie.com Michael Hill mdhillca@gmail.com How do I assign profiles to devices?

Open System SettingsColor, and click the device that you wish to add a profile to.

Open System SettingsColor, and click the device that you wish to add a profile to.

By clicking Add profile you can select an existing profile or import a new file.

Each device can have multiple profiles assigned to it, but only one profile can be the default profile. The default profile is used when there is no extra information to allow the profile to be chosen automatically. An example of this automatic selection would be if one profile was created for glossy paper and another plain paper.

You can make a profile default by changing it with the radio button.

If calibration hardware is connected the Calibrate… button will create a new profile.

usr/share/help-langpack/hr/ubuntu-help/unity-dash-files.page0000644000373100047300000000320312701706771025775 0ustar langpacklangpack00000000000000 Find files, folders, and downloads. Jeremy Bicha jbicha@ubuntu.com Files lens

The files lens is the second lens after the Dash home in the lens bar and is represented by a document. The files lens gives you access to recently used files, folders, or downloads.

You can use SuperF to open the Dash directly at the files lens.

If you use Google Drive, be sure to add your Google credentials to Online Accounts to see search results from Google Drive.
Previews

Right click on a search result to open a preview. The preview shows the file format, file size, and when it was last saved.

You can open a file, email it, or open the folder that contains the file.

Filters

Click Filter results to filter by file type, file size, or the last time the file was saved.

 usr/share/help-langpack/hr/ubuntu-help/unity-launcher-change-size.page0000644000373100047300000000235012701706773027756 0ustar langpacklangpack00000000000000 Ubuntu Documentation Team Make the icons in the Launcher larger or smaller. Change the size of icons in the Launcher

You can make the Launcher icons smaller to allow more items to fit in the Launcher. Or you might want to make the Launcher icons larger so they are easier to click.

Click the icon at the very right of the menu bar and select System Settings.

Click Appearance.

Move the Launcher icon size slider to increase or decrease the size of the Launcher icons.

The default Launcher icon size is 48.

 usr/share/help-langpack/hr/ubuntu-help/shell-windows-tiled.page0000644000373100047300000000276512701706774026525 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Maximize two windows side-by-side. Tile windows

You can maximize a window on only the left or right side of the screen, allowing you to place two windows side-by-side to quickly switch between them.

To maximize a window along a side of the screen, grab the titlebar and drag it to the left or right side until half of the screen is highlighted. Using the keyboard, hold down Ctrl and Super and press the Left or Right key.

Hold down the Alt key and drag anywhere in a window to move it.

 usr/share/help-langpack/hr/ubuntu-help/a11y-visualalert.page0000644000373100047300000000355512701706776025733 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Enable visual alerts to flash the screen or window when an alert sound is played. Flash the screen for alert sounds

Your computer will play a simple alert sound for certain types of messages and events. If you have a hard time hearing these sounds, you can have either the entire screen or your current window visually flash whenever the alert sound is played.

This can also be useful if you're in an environment where you need your computer to be silent, such as in a library (see to learn how to mute the alert sound).

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Universal Access and select the Hearing tab.

Switch Visual Alerts on. Select whether you want the entire screen or just your current window title to flash.

usr/share/help-langpack/hr/ubuntu-help/net-wireless-disconnecting.page0000644000373100047300000000657712701706771030077 0ustar langpacklangpack00000000000000 Jim Campbell jwcampbell@gmail.com Phil Bull philbull@gmail.com You might have low signal, or the network might not be letting you connect properly. Why does my wireless network keep disconnecting?

You may find that you have been disconnected from a wireless network even though you wanted to stay connected. Your computer will normally try to reconnect to the network as soon as this happens (the network icon on the menu bar will pulse if it is trying to reconnect), but it can be annoying, especially if you were using the internet at the time.

Weak wireless signal

A common reason for being disconnected from a wireless network is that you have low signal. Wireless networks have a limited range, so if you are too far away from the wireless base station you may not be able to get a strong enough signal to maintain a connection. Walls and other objects between you and the base station can also weaken the signal.

The network icon on the menu bar displays how strong your wireless signal is. If the signal looks low, try moving closer to the wireless base station.

Network connection not being established properly

Sometimes, when you connect to a wireless network, it may appear that you have successfully connected at first, but then you will be disconnected soon after. This normally happens because your computer was only partially successful in connecting to the network - it managed to establish a connection, but was unable to finalize the connection for some reason and so was disconnected.

A possible reason for this is that you entered the wrong wireless passphrase, or that your computer was not allowed on the network (because the network requires a username to log in, for example).

Unreliable wireless hardware/drivers

Some wireless network hardware can be a little unreliable. Wireless networks are complicated, so wireless cards and base stations occasionally run into minor problems and may drop connections. This is annoying, but it happens quite regularly with many devices. If you are disconnected from wireless connections from time to time, this may be the only reason. If it happens very regularly, you may want to consider getting some different hardware.

Busy wireless networks

Wireless networks in busy places (in universities and coffee shops, for example) often have many computers trying to connect to them at once. Sometimes these networks get too busy and may not be able to handle all of the computers that are trying to connect, so some of them get disconnected.

 usr/share/help-langpack/hr/ubuntu-help/a11y.page0000644000373100047300000000560012701706776023373 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Seeing, hearing, mobility, braille… Universal access

The Unity desktop includes assistive technologies to support users with various impairments and special needs, and to interact with common assistive devices. Many accessibility features can be accessed from the Universal Access section of System Settings.

The GNOME desktop includes assistive technologies to support users with various impairments and special needs, and to interact with common assistive devices. Many accessibility features can be accessed from the accessibility menu in the top bar.

Visual impairments Blindness Low vision Color-blindness Other topics
Hearing impairments
Mobility impairments Mouse movement Clicking and dragging Keyboard use Other topics
usr/share/help-langpack/hr/ubuntu-help/session-formats.page0000644000373100047300000000561712701706772025760 0ustar langpacklangpack00000000000000 Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Ubuntu Documentation Team Choose a region used for date and time, numbers, currency, and measurement. Change date and measurement formats

You can control the formats that are used for dates, times, numbers, currency, and measurement to match the local customs of your region.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Language Support and select the Regional Formats tab.

Select the region that most closely matches the formats you'd like to use. By default, the list only shows regions that use the language set on the Language tab.

You have to log out and back in for these changes to take effect. Click the icon at the very right of the menu bar and select Log Out to log out.

After you've selected a region, the area below the list shows various examples of how dates and other values are shown. Although not shown in the examples, your region also controls the starting day of the week in calendars.

Change the system formats

When you change your region for formats, you only change it for your account after you log in. You can also change the system formats, the formats used in places like the login screen.

Change your formats, as described above.

Click Apply System-Wide.

Administrative privileges are required. Enter your password, or the password for the requested administrator account.

You can find more detailed guidance on languages and regional formats in Language Support Help.
usr/share/help-langpack/hr/ubuntu-help/power-willnotturnon.page0000644000373100047300000000534312701706776026714 0ustar langpacklangpack00000000000000 Loose cables and hardware problems are possible reasons. GNOME Documentation Project gnome-doc-list@gnome.org My computer will not turn on

There are a number of reasons why your computer will not turn on. This topic gives a brief overview of some of the possible reasons.

Computer not plugged in, empty battery, or loose cable

Make sure that the power cables of the computer are firmly plugged in and the power outlets are switched on. Make sure that the monitor is plugged in and switched on too. If you have a laptop, connect the charging cable (in case it has run out of battery). You may also want to check that the battery is correctly fitted in place (check the underside of the laptop) if it's removable.

Problem with the computer hardware

A component of your computer may be broken or malfunctioning. If this is the case, you will need to get your computer repaired. Common faults include a broken power supply unit, incorrectly-fitted components (such as the memory/RAM) and a faulty motherboard.

The computer beeps and then switches off

If the computer beeps several times when you turn it on and then turns off (or fails to start), it may be indicating that it has detected a problem. These beeps are sometimes referred to as beep codes, and the pattern of beeps is intended to tell you what the problem with the computer is. Different manufacturers use different beep codes, so you will have to consult the manual for your computer's motherboard, or take your computer in for repairs.

The computer fans are spinning but nothing is on the screen

The first thing to check is that your monitor is plugged in and turned on.

This problem could also be due to a hardware fault. The fans might turn on when you press the power button, but other essential parts of the computer might fail to turn on. In this case, take your computer in for repairs.

 usr/share/help-langpack/hr/ubuntu-help/backup-how.page0000644000373100047300000000455712701706773024667 0ustar langpacklangpack00000000000000 Use Déjà Dup (or some other backup application) to make copies of your valuable files and settings to protect against loss. Tiffany Antopolski tiffany.antopolski@gmail.com GNOME Documentation Project gnome-doc-list@gnome.org Michael Hill mdhillca@gmail.com How to back up

The recommended way of backing up your files and settings is to let a backup application manage the backup process for you. A number of different backup applications are available, like Déjà Dup.

The help for your chosen backup application will walk you through setting your preferences for the backup, as well as how to restore your data.

An alternative option is to copy your files to a safe location, such as an external hard drive, another computer on the network, or a USB drive. Your personal files and settings are usually in your Home folder, so you can copy them from there.

The amount of data you can back up is limited by the size of the storage device. If you have the room on your backup device, it is best to back up the entire Home folder with the following exceptions:

Files that are already backed up somewhere else, such as to a CD, DVD, or other removable media.

Files that you can recreate easily. For example, if you are a programmer, you don't have to back up the files that get produced when you compile your programs. Instead, just make sure that you back up the original source files.

Any files in the Trash folder. Your Trash folder can be found in ~/.local/share/Trash.

 usr/share/help-langpack/hr/ubuntu-help/printing-setup-default-printer.page0000644000373100047300000000401512701706773030707 0ustar langpacklangpack00000000000000 Pick the printer that you use most often. Jim Campbell jwcampbell@gmail.com Paul W. Frields stickster@gmail.com Jana Svarova jana.svarova@gmail.com 2013 Set the default printer

If you have more than one printer available, you can select which will be your default printer. You may want to pick the printer you use most often.

Click the icon at the far right of the menu bar and select System Settings.

Open Printers.

Right click your desired default printer from the list of available printers, and click Set as Default.

When choosing from the list of available printers, you can filter the printer search results by specifying a name or location of the printer (for example, 1st floor or entrance).

The search results filtering is available only in the dialog for addition of new printers.

When you print in an application, the default printer is automatically used, unless you choose a different printer for that specific print job.

 usr/share/help-langpack/hr/ubuntu-help/color-notifications.page0000644000373100047300000000364012701706775026606 0ustar langpacklangpack00000000000000 Richard Hughes richard@hughsie.com You can be notified if your color profile is old and inaccurate. Can I get notified when my color profile is inaccurate?

Unfortunately we can't tell without recalibrating whether a device profile is accurate. We can use a simple metric of the amount of time since calibration to determine if a recalibrate is recommended.

Some companies have very specific timeout policies for profiles, as an inaccurate color profile can make a huge difference to an end product.

If you set the timeout policy and a profile is older than the policy then a red warning triangle will be shown in the System SettingsColor dialog next to the profile. A warning notification will also be shown every time you log into your computer.

To set the policy for display and printer devices, you specify the maximum age of the profile in days:

[rupert@gnome] gsettings set org.gnome.settings-daemon.plugins.color recalibrate-printer-threshold 180 [rupert@gnome] gsettings set org.gnome.settings-daemon.plugins.color recalibrate-display-threshold 180 usr/share/help-langpack/hr/ubuntu-help/sound-broken.page0000644000373100047300000000161612701706773025226 0ustar langpacklangpack00000000000000 Troubleshoot problems like having no sound or having poor sound quality. GNOME Documentation Project gnome-doc-list@gnome.org Sound problems

There are a number of ways for sound playback to break on your computer. Which of the topics below best describes the problem you are experiencing?

 usr/share/help-langpack/hr/ubuntu-help/mouse-touchpad-click.page0000644000373100047300000001011412701706774026632 0ustar langpacklangpack00000000000000 Click, drag, or scroll using taps and gestures on your touchpad. Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Click, drag, or scroll with the touchpad

You can click, double-click, drag, and scroll using only your touchpad, without separate hardware buttons.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Mouse & Touchpad.

In the Touchpad section, check Tap to click.

The Touchpad section only appears if your system has a touchpad.

To click, tap on the touchpad.

To double-click, tap twice.

To drag an item, double-tap but don't lift your finger after the second tap. Drag the item where you want it, then lift your finger to drop.

If your touchpad supports multi-finger taps, right-click by tapping with two fingers at once. Otherwise, you still need to use hardware buttons to right-click. See for a method of right-clicking without a second mouse button.

If your touchpad supports multi-finger taps, middle-click by tapping with three fingers at once.

When tapping or dragging with multiple fingers, make sure your fingers are spread far enough apart. If your fingers are too close, your computer may think they're a single finger.
Two finger scroll

You can scroll using your touchpad using two fingers.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Mouse & Touchpad.

In the Touchpad section, check Two finger scroll.

When this is selected, tapping and dragging with one finger will work as normal, but if you drag two fingers across any part of the touchpad, it will scroll instead. If you also select Enable horizontal scrolling, you can move your fingers left and right to scroll horizontally. Be careful to space your fingers a bit apart. If your fingers are too close together, they just look like one big finger to your touchpad.

Two-finger scrolling may not work on all touchpads.
Content sticks to fingers

You can drag content as if sliding a physical piece of paper using the touchpad.

Kliknite na ikonu na desnoj strani trake izbornika i odaberite Postavke sustava.

Open Mouse & Touchpad.

In the Touchpad section, check Content sticks to fingers.

This feature is also known as Natural Scrolling or Reverse Scrolling.
usr/share/help-langpack/hr/ubuntu-help/sound-volume.page0000644000373100047300000000462212701706772025254 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com Shaun McCance shaunm@gnome.org Set the sound volume for the computer and control the loudness of each application. Change the sound volume

To change the sound volume, click the sound menu on the menu bar and move the volume slider left or right. You can completely turn off sound by checking Mute.

Some keyboards have keys that let you control the volume. They normally look like stylized speakers with waves coming out of them. They are often near the "F" keys at the top. On laptop keyboards, they are usually on the "F" keys. Hold down the Fn key on your keyboard to use them.

Of course, if you have external speakers, you can also change the volume using the volume control on the speakers themselves. Some headphones have a volume control too.

Changing the sound volume for individual applications

You can change the volume for one application, but leave the volume for others unchanged. This is useful if you're listening to music and browsing the web, for example. You might want to turn off the volume in the web browser so sounds from websites don't interrupt the music.

Some applications have volume controls in their main windows. If your application has one of these, use that to change the volume. Otherwise, click the sound menu on the menu bar and click Sound Settings. Go to the Applications tab and change the volume of the application there.

Only applications that are playing sounds will be listed. If an application is playing sounds but isn't listed, it might not support the feature that lets you control its volume in this way. In that case, you can't change its volume.

 usr/share/help-langpack/hr/ubuntu-help/files-lost.page0000644000373100047300000000404712701706773024702 0ustar langpacklangpack00000000000000 Follow these tips if you can't find a file you created or downloaded. GNOME Documentation Project gnome-doc-list@gnome.org Shaun McCance shaunm@gnome.org Michael Hill mdhillca@gmail.com Find a lost file

If you created or downloaded a file, but now you can't find it, follow these tips.

If you don't remember where you saved the file, but you have some idea of how you named it, you can search for the file by name. See to learn how.

If you just downloaded the file, your web browser might have automatically saved it to a common folder. Check the Desktop and Downloads folders in your home folder.

You might have accidentally deleted the file. When you delete a file, it gets moved to the trash, where it stays until you manually empty the trash. See to learn how to recover a deleted file.

You might have renamed the file in a way that made the file hidden. Files that start with a . or end with a ~ are hidden in the file manager. Click the down button in the file manager toolbar and pick Show Hidden Files to display them. See to learn more.

 usr/share/help-langpack/hr/ubuntu-help/unity-dash-intro.page0000644000373100047300000000606212701706767026041 0ustar langpacklangpack00000000000000 The Dash is the top button in the Launcher. Jeremy Bicha jbicha@ubuntu.com Find applications, files, music, and more with the Dash

Unity Search

The Dash allows you to search for applications, files, music, and videos, and shows you items that you have used recently. If you have ever worked on a spreadsheet or edited an image and forgot where you saved it, you will surely find this feature of the Dash to be useful.

To start using the Dash, click the top icon in the Launcher. This icon has the Ubuntu logo on it. For faster access, you can just press the Super key.

To hide the Dash, click the top icon again or press Super or Esc.

Search everything from the Dash home

The first thing you'll see when opening the Dash is the Dash Home. Without typing or clicking anything, the Dash Home will show you applications and files you've used recently.

Only one row of results will show for each type. If there are more results, you can click See more results to view them.

To search, just start typing and related search results will automatically appear from the different installed lenses.

Click on a result to open it, or you can press Enter to open the first item in the list.

Lenses

Lenses allow you to focus the Dash results and exclude results from other lenses.

You can see the available lenses in the lens bar, the darker strip at the bottom of the Dash.

To switch to a different lens, click the appropriate icon or press CtrlTab.

Filters

Filters allow you to narrow down your search even further.

Click Filter results to choose filters. You may need to click a filter heading such as Sources to see the available choices.

Previews

If you right click on a search result, a preview will open with more information about the result.

To close the preview, click any empty space or press Esc.

 usr/share/help-langpack/hr/ubuntu-help/color-missingvcgt.page0000644000373100047300000000230712701706767026272 0ustar langpacklangpack00000000000000 Whole-screen color correction modifies all the screen colors on all windows. Richard Hughes richard@hughsie.com Missing information for whole-screen color correction?

Unfortunately, many vendor-supplied ICC profiles do not include the information required for whole-screen color correction. These profiles can still be useful for applications that can do color compensation, but you will not see all the colors of your screen change.

In order to create a display profile, which includes both calibration and characterization data, you will need to use a special color measuring instruments called a colorimeter or a spectrometer.

usr/share/help-langpack/hr/ubuntu-help/printing-2sided.page0000644000373100047300000000320512701706767025621 0ustar langpacklangpack00000000000000 Print on both sides of the paper, or multiple pages per sheet. Phil Bull philbull@gmail.com Jim Campbell jwcampbell@gmail.com Print two-sided and multi-page layouts

To print on both sides of each sheet of paper:

Click FilePrint.

Go to the Page Setup tab of the Print window and choose an option from the Two-sided drop-down list. If the option is disabled, two-sided printing is not available for your printer.

Printers handle two-sided printing in different ways. It's a good idea to experiment with your printer to see how it works.

You can print more than one page of the document per side of paper too. Use the Pages per side option to do this.

The availability of these options may depend on the type of printer you have, as well as the application you are using. This option may not always be available.

 usr/share/help-langpack/hr/ubuntu-help/net-security.page0000644000373100047300000000127412701706773025253 0ustar langpacklangpack00000000000000 Antivirus software, basic firewalls… The Ubuntu Documentation Team Keeping safe on the internet usr/share/help-langpack/hr/ubuntu-help/printing-inklevel.page0000644000373100047300000000321712701706770026255 0ustar langpacklangpack00000000000000 Check the amount of ink or toner left in printer cartridges. Anita Reitere nitalynx@gmail.com How can I check my printer's ink/toner levels?

How you check how much ink or toner is left in your printer depends on the model and manufacturer of your printer, and the drivers and applications installed on your computer.

Some printers have a built-in screen to display ink levels and other information.

The drivers and status tools for most HP printers are provided by the HP Linux Imaging and Printing (HPLIP) project. Other manufacturers might supply proprietary drivers with similar features.

Alternatively, you can install an application to check or monitor ink levels. Inkblot shows ink status for many HP, Epson and Canon printers. See if your printer is on the list of supported models. Another ink levels application for Epson and some other printers is mktink.

Some printers are not yet well supported on Linux, and others are not designed to report their ink levels.

 usr/share/help-langpack/hr/ubuntu-help/printing-order.page0000644000373100047300000000375212701706770025563 0ustar langpacklangpack00000000000000 Collate and reverse the print order. Phil Bull philbull@gmail.com Jim Campbell jwcampbell@gmail.com Make pages print in a different order
Reverse

Printers usually print the first page first, and the last page last, so the pages end up in reverse order when you pick them up. If needed, you can reverse this printing order.

To reverse the order:

Click FilePrint.

In the General tab of the Print window under Copies, check Reverse. The last page will be printed first, and so on.
Collate

If you are printing more than one copy of the document, the print-outs will be grouped by page number by default (i.e. all of the copies of page one come out, then the copies of page two, and so on). Collating will make each copy come out with its pages grouped together in the right order instead.

To Collate:

Click FilePrint.

In the General tab of the Print window under Copies check Collate.
usr/share/help-langpack/hr/ubuntu-help/net-install-flash.page0000644000373100047300000000454112701706775026147 0ustar langpacklangpack00000000000000 Phil Bull philbull@gmail.com You may need to install Flash to be able to view websites like YouTube, which display videos and interactive web pages. Install the Flash plug-in

Flash is a plug-in for your web browser that allows you to watch videos and use interactive web pages on some websites. Some websites won't work without Flash.

If you do not have Flash installed, you will probably see a message telling you so when you visit a website that needs it. Flash is available as a free (but not open-source) download for most web browsers.

How to install Flash

Click this link to launch an install option window.

If you choose to install Flash, click Install.

If you have any web browser windows open, close them and then re-open them. The web browser should detect that Flash is installed when you open it again, and you should now be able to view websites using Flash.
Open-source alternatives to Flash

A handful of free, open-source alternatives to Flash are available. These tend to work better than the Flash plug-in in some ways (for example, by handling sound playback better), but worse in others (for example, by not being able to display some of the more complicated Flash pages on the web).

You might like to try one of these if you are dissatisfied with the Flash player, or if you would like to use as much open-source software as possible on your computer. Here are a few of the options:

Gnash

LightSpark
usr/share/help-langpack/hr/ubuntu-help/color-notspecifiededid.page0000644000373100047300000000273412701706774027241 0ustar langpacklangpack00000000000000 Richard Hughes richard@hughsie.com Default monitor profiles do not have a calibration date. Why don't the default monitor profiles have a calibration expiry?

The default color profile used for each monitor is generated automatically based on the display EDID which is stored in a memory chip inside the monitor. The EDID only gives us a snapshot of the available colors the monitor was capable of displaying when it was manufactured, and does not contain much other information for color correction.

As the EDID cannot be updated, it has no expiry date.

Getting a profile from the monitor vendor or creating a profile yourself would lead to more accurate color correction.

usr/share/help-langpack/hr/deja-dup/license.page0000644000373100047300000000175612701535751023464 0ustar langpacklangpack00000000000000 Upoznajte vaša prava Licenca

Ovaj program je slobodan software; možete ga redistribuirati i/ili modificirati pod uvjetima GNU Opće Javne Licence (General Public License) objavljene od Fundacije Slobodnog Softvera (Free Software Foundation); ili inačice 3 Licence. ili (po vašemu mišljenju) svaka kasnija inačica.

Ovaj program je distribuiran u nadi da će biti koristan, ali BEZ IKAKVOG JAMSTVA; čak i bez podrazumjevanog jamstva ili POGODNOSTI ZA ODREĐENU NAMJENU. Pogledajte GNU Opću Javnu Licencu (General Public License) za više informacija.

Trebali ste dobiti primjerak GNU Opće Javne Licence (General Public License) uz ovaj program. Ako niste, pogledajte http://www.gnu.org/licenses/.

 usr/share/help-langpack/hr/deja-dup/support.page0000644000373100047300000000133412701535751023546 0ustar langpacklangpack00000000000000 Nabavite više pomoći Podrška

Ako imate neodgovorenih pitanja ili problema koje ne razumijete, molim pitajte o njima na forumu podrške.

Imajte na umu da ljudi koji odgovaraju na vaša pitanja su volonteri, da je Déjà Dup namijenjen da radi bez greške i da dolazi bez ikakva jamstva. Stoga budite ljubazni i strpljivi.

 usr/share/help-langpack/hr/deja-dup/contribute.page0000644000373100047300000000404112701535751024206 0ustar langpacklangpack00000000000000 Pomozite učiniti Déjà Dup boljim Uključite se

Dakle, želite pomoći kako bi Déjà Dup postao bolji? Odlično! Evo vam nekih prijedloga.

Prijavite probleme

Jeste li vidjeli propust? Imate ideju za novu značajku? Jednostavno report it as a bug. Budite strpljivi čekajući odgovor.

Napominjemo da bug izvješća trebaju biti samo na engleskom jeziku.

Razgovarajte s nama

Mi ne grizemo. Pošaljite nam e-mail na mailing list.

Ili subscribe to the list. Lista je na sporoj web stranici.

Napominjemo da lista mora biti samo na engleskom jeziku.

Prevođenje

Govorite li dobro engleski i neki drugi jezik!? Možete pomoći prevesti Déjà Dup preko a web interface. To je doista prilično jednostavno i vrlo je cijenjeno.

Podrška

Volite li pomagati ljudima? Odgovorite na pitanja korisnika i zahtjeve za podrškom.

Ovo je još jedan sjajan način za ne-engleske govornike da se uključe, tako što možete odgovoriti na pitanja objavljena na hrvatskom jeziku.

Šifriranje

Uvijek postoji više bugova za popraviti. Ako želite saznati što treba raditi, razgovarajte s nama na mailing listi kako je gore opisano.

 usr/share/help-langpack/hr/deja-dup/restore-revert.page0000644000373100047300000000240312701535751025020 0ustar langpacklangpack00000000000000 Vrati prijašnju inačicu datoteke Vraćanje datoteke

Pregledajte mapu koja sadrži datoteku koju želite vratiti.

Odaberite klikom datoteku koju želite vratiti.

Klikni UrediVrati na prethodnu inačicu….

Kada se Vrati dijalog pojavi, odaberite datum od kojeg želite vratiti.

Kliknite Naprijed.

Pregledajte svoje odabire i kliknite Vrati. Imajte na umu da će to prebrisati trenutnu inačicu datoteke.

Možete odabrati više datoteka odjednom prije vraćanja.

Također možete vratiti datoteke na naredbenom retku:

deja-dup --restore DATOTEKA1 DATOTEKA2 usr/share/help-langpack/hr/deja-dup/backup-auto.page0000644000373100047300000000207212701535751024245 0ustar langpacklangpack00000000000000 Priuštite si mir Automatsko sigurnosno kopiranje

Ako samo sigurnosno kopirate kada se sjetite, ne stvarate sigurnosne kopije dovoljno često. Srećom, lako je postaviti automatsko stvaranje sigurnosnih kopija.

Otvorite vaše Sigurnosno kopiranje postavke.

Pregledajte vašePostavke sigurnosnog kopiranja, da potvrdite da su ono što želite.

Uključite Automatsko sigurnosno kopiranje opcija na Pregled strani.

Razmislite o čuvanju sigurnosnih kopija samo za određeno vrijeme, koristeći mogućnost Čuvaj sigurnosne kopije na kartici Planiranje sigurnosnog kopiranja. Inače može završiti velikom potrošnjom prostora dok niste obraćali pažnju.

 usr/share/help-langpack/hr/deja-dup/backup-first.page0000644000373100047300000000144712701535751024431 0ustar langpacklangpack00000000000000 Započni odmah Vaša prva sigurnosna kopija

Otvorite vaše Sigurnosno kopiranje postavke.

Pregledajte vašePostavke sigurnosnog kopiranja, da potvrdite da su ono što želite.

Kliknite na Sigurnosno kopiraj odmah… tipku u Pregled sigurnosnog kopiranja stranici.

Pričekajte. Sigurnosno kopiranje može potrajati dugo vremena, pogotovo ako sigurnosno kopirate na udaljenom poslužitelju.

 usr/share/help-langpack/hr/deja-dup/prefs.page0000644000373100047300000001156412701535751023157 0ustar langpacklangpack00000000000000 Prilagodite postavke sigurnosnog kopiranja Postavke <gui>Automatsko sigurnosno kopiranje</gui>

Uključite ovu mogućnost kako bi Déjà Dup automatski stvarao sigurnosne kopije. To je preporučljivo kako sami ne bi zaboravili sigurnosno kopirati. Sigurnosne kopije su korisnije ako su najnovije, stoga je važno da redovito stvarate sigurnosne kopije.

 <gui>Mape uključene u sigurnosno kopiranje</gui>

Odaberite popis mapa koje želite uključiti u vaše sigurnosne kopije. Pritisnite Dodaj ili Ukloni tipke za promjenu popisa. Ako ste samo zainterisirani za sigurnosno kopiranje vlastitih podataka, zadana Osobna mapa je dovoljna.

 <gui>Mape isključene iz sigurnosnog kopiranja</gui>

Odaberite popis mapa koje ne želite sigurnosno kopirati. Pritisnite Dodaj ili Ukloni tipke za promjenu popisa.

Neki od vaših podataka mogu biti veliki i ne vrlo važni. U tom slučaju možete sačuvati nešto vremena i prostora tako što ih nećete sigurnosno kopirati.

Neke lokacije su uobičajeno uvijek isključene:

~/.adobe/Flash_Player/AssetCache

~/.cache

~/.gvfs

~/.Private

~/.recent-applications.xbel

~/.recently-used.xbel

~/.steam/root (koje po zadanom isto zanemaruje ~/.local/share/Steam)

~/.thumbnails

~/.xsession-errors

/proc

/run

/sys

/tmp

 <gui>Lokacija pohrane sigurnosne kopije</gui>

Koristite ovu mogućnost za određivanje lokacije pohrane koju će Déjà Dup koristiti za sigurnosno kopiranje ili vraćanje sigurnosnih kopija.

Usluge oblaka

Prvih nekoliko lokacija pohrane su usluge pohrane u oblaku koje pružaju različite kompanije. Za malu naknadu, one čuvaju vaše podatke. Usluge pohrane u oblaku poput ovih su preporučeni zato jer je to najlakši način čuvanja vaših podataka vanmrežno (što znači izvan vašeg doma: u slučaju katastrofe ili krađe, vaši podaci će biti uvijek sigurni).

Ove usluge se naplaćuju. Provjerite pažljivo njihove cijene prije nego ih koristite.

 Udaljeni poslužitelji

Odaberite vrstu udaljenog poslužitelja na koji se želite povezati. Zatim možete unijeti podatke poslužitelja. Alternativno, ako znate URL vašeg poslužitelja odaberite Prilagođena lokacija i unesite.

 Prijenosni mediji

Možda ćete vidjeti prijenosne medije kao što su vanjski tvrdi diskovi ili USB diskovi na popisu.

 Lokalni direktorij

Možda želite odabrati lokalnu mapu za lokaciju pohrane. Zapamtite da sigurnosne kopije mogu prilično velike, stoga se pobrinite da imate dovoljno slobodnog diskovnog prostora.

Ovo nije preporučljivo, jer ako vaš hardver zakaže, izgubit ćete i svoje izvorne podatke i vaše sigurnosne kopije.

 <gui>Zadrži</gui>

Odaberite minimalni iznos vremena za čuvanje sigurnosnih kopija datoteka. Ako ustanovite da datoteke sigurnosne kopije zauzimaju previše prostora, možda želite smanjiti iznos vremena za čuvanje. Zbog provedbe detalja, datoteke mogu biti čuvane malo dulje od izabranog vremena. Ali nijedna datoteka neće biti izbrisana prije.

Po zadanom sigurnosne kopije se čuvaju zauvijek, ali mogu biti izbrisane ranije ako na lokaciji pohrane ponestaje slobodnog prostora.

 usr/share/help-langpack/hr/deja-dup/restore-lost.page0000644000373100047300000000226312701535751024476 0ustar langpacklangpack00000000000000 Vrati datoteku koja više nije prisutna Vraćam izgubljenu datoteku

Pregledaj mapu koja sadrži datoteku koju ste izgubili

klikni DatotekaVrati izgubljenu datoteku….

Kada se dijalog Vrati pojavi, pretražit će datoteke koje se nalaze u sigurnosnoj kopiji, ali ih više nema u mapi.

Kada vidite datoteku koju želite vratiti, odaberite ju i kliknite Naprijed.

Pregledajte svoje odabire i kliknite Vrati.

Možete vratiti izgubljene datoteke iz naredbenog retka ako se sjećate njihovih imena:

deja-dup --restore DATOTEKA1 DATOTEKA2 usr/share/help-langpack/hr/deja-dup/restore-full.page0000644000373100047300000000514112701535751024455 0ustar langpacklangpack00000000000000 Oporavak od totalnog zatajenja sustava Potpuno vraćanje sustava
Postavke

Dovedite vaš sustav u svježe stanje. Na primjer, svježa instalacija ili novi račun na starom računalu. Ne brinite još o ugodnom i prilagođenom dobivanju postavki. Prije mijenjanja pričekajte dok ne vratite vaše prethodne postavke, bilo koja napravljena prilagodba bit će poništena kada vraćanje završi.

Zatim trebate instalirati Déjà Dup. Vaš dobavljač distribucije može ju dobaviti. Inače ju možete preuzeti i kompajlirati.
Vrati

Otvorite vaše Sigurnosno kopiranje postavke.

Klikni na Vrati… tipku na Pregled stranici.

A Vrati dijalog će se pojaviti tražeći gdje su vaše datoteke sigurnosne kopije pohranjene (vašaLokacija sigurnosne kopije).

Kliknite Naprijed i pričekajte da Déjà Dup pretraži lokaciju sigurnosnog kopiranja.

Odaberite od kojeg datuma želite vratiti. Uglavnom ovo možete jednostavno ostaviti, pod zadanim je najnovija sigurnosna kopija

Kliknite Naprijed.

Odaberite gdje će se vratiti sigurnosna kopija. Budući da je ovo sigurnosna kopija cijelog sustava, ostavite ga kao zadanog (vraća se preko trenutne instalacije).

Kliknite Naprijed.

Pregledajte svoje odabire i kliknite Vrati.

Pričekajte. Vraćanje može potrajati dulje vrijeme.

Na kraju, ponovno instalirajte sve programe koje ste koristili u prethodnoj instalaciji.

Ako iz bilo kojeg razloga imate problema nakon što pokušavate vratiti sigurnosnu kopiju s Vraćanje datoteka na izvorne lokacije opcijom, pokušajte vratiti sigurnosnu kopiju umjesto u privremeni direktorij pomaknite datoteke tamo gdje pripadaju.

Ako to još uvijek ne radi, tu je više drastičnih stvari koje možete isprobati.
usr/share/help-langpack/hr/deja-dup/restore-worst-case.page0000644000373100047300000002553212701535751025610 0ustar langpacklangpack00000000000000 Što učiniti ako ne možete vratiti datoteke Kada sve pođe krivo

Déjà Dup neće uspjeti u vraćanju. Možda se ruši ili vam daje grešku tijekom pokušaja vraćanja. Kada stvarno trebate svoje podatke natrag, posljednja stvar koju želite je imati posla sa bug-om. Razmislite o podnošenju bug izvješća ali u međuvremenu, ovdje su neki pristupi o rješavanju ovog čudnog ponašanja Déjà DUP -a i vraćanju vaših podatka natrag.

Ovo može biti tehničko pitanje. Ako vam ništa od ovoga nema smisla, slobodno pitajte za pomoć.

Otvori Terminal prozor pritiskom na CtrlAltT.

Napravite direktorij u kojem ćete smjestiti vaše obnovljene datoteke. Ovaj navod će koristiti /tmp/restore:

mkdir -p /tmp/restore
Vraćanje s dvostrukosti

Pod pretpostavkom da Déjà Dup jednostavno trenutno ne radi, koristiti ćete alat naredbenog retkadvoličnost koji u pozadini koristi Déjà DUP za sigurnosno kopiranje i vraćanje vaših datoteka.

Ako želite više informacija o dvoličnosti od ovdje predstavljenog, pokrenite man duplicity.

Prvo što ćemo pokušati je jednostavno vratiti sve vaše podatke. Pod pretpostavkom da su vaše datoteke na vanjskom disku montirane kao /media/backupi da ste izabrali šifriranje sigurnosne kopije, pokušajte ovo:

duplicity --gio file:///media/backup /tmp/restore

Ako niste šifrirali sigurnosnu kopiju, dodajte --no-encryption naredbi.

Druge lokacije sigurnosne kopije

Ako ste sigurnosno kopirali na udaljeni poslužitelj ili u poslužitelj oblaka, sintaksa koju koristite sa dvoličnosti biti će drugačija od primjera vanjskog diska iznad. Pogledajte ispod kako da se spojiti na odabranu lokaciju sigurnosne kopije.

Ne zaboravite dodati --no-encryption na bilo koji primjer naredbe ako vaša sigurnosna kopija nije šifrirana.

Ako se čini da dvoličnost ima problema s povezivanjem na vaš poslužitelj, pokušajte preuzeti sve datoteke dvoličnosti u lokalnu mapu i slijedite jednostavniji primjer iznad.

Amazon S3

Potražite svoj ​​Amazon S3 ID pristupni ključ i tajni ključ pristupa i zamijeniti instance ID i TAJNO u donjem primjeru s tim odgovarajućim vrijednostima.

Možda želite odrediti mapu u koju želite staviti datoteke sigurnosne kopije. U donjem primjeru, zamijenite bilo koju instancu MAPA sa tom putanjom.

export AWS_ACCESS_KEY_ID=ID export AWS_SECRET_ACCESS_KEY=TAJNO duplicity s3+http://deja-dup-auto-MALASLOVA_ID/MAPA /tmp/restore Rackspace Cloud datoteke

Potražite svoje ​​Rackspace korisničko ime i API ključ i zamijenite instancu KORISNIČKO IME i KLJUČ u donjem primjeru s tim odgovarajućim vrijednostima.

Možda želite odrediti spremnik u koji će se pohranjivati datoteke sigurnosne kopije. U donjem primjeru, zamijenite bilo koju instancu SPREMNIKA​​ s tim imenom.

export CLOUDFILES_USERNAME=KORISNIČKO IME export CLOUDFILES_APIKEY=KLJUČ duplicity cf+http://SPREMNIK /tmp/restore FTP

Potražite adresu svojeg ​​poslužitelja, ulaz, korisničko ime i lozinku i zamijenite instance POSLUŽITELJ, ULAZ, KORISNIČKO IME i LOZINKA u donjem primjeru s tim odgovarajućim vrijednostima.

Možda želite odrediti mapu u koju želite staviti datoteke sigurnosne kopije. U donjem primjeru, zamijenite bilo koju instancu MAPA sa tom putanjom.

Ako ste izabrali da se ne prijavite s korisničkim imenom, koristite anonymous kao vaše KORISNIČKO IME u nastavku.

gvfs-mount ftp://KORISNIČKO IME@POSLUŽITELJ:ULAZ/MAPA duplicity --gio ftp://KORISNIČKO IME@POSLUŽITELJ:ULAZ/MAPA /tmp/restore SSH

Potražite adresu svojeg ​​poslužitelja, ulaz, korisničko ime i lozinku i zamijenite instance POSLUŽITELJ, ULAZ, KORISNIČKO IME i LOZINKA u donjem primjeru s tim odgovarajućim vrijednostima.

Možda želite odrediti mapu u koju želite staviti datoteke sigurnosne kopije. U donjem primjeru, zamijenite bilo koju instancu MAPA sa tom putanjom.

gvfs-mount ssh://KORISNIČKO IME@POSLUŽITELJ:ULAZ/MAPA duplicity --gio ssh://KORISNIČKO IME@POSLUŽITELJ:ULAZ/MAPA /tmp/restore WebDAV

Potražite adresu svojeg ​​poslužitelja, ulaz, korisničko ime i lozinku i zamijenite instance POSLUŽITELJ, ULAZ, KORISNIČKO IME i LOZINKA u donjem primjeru s tim odgovarajućim vrijednostima.

Možda želite odrediti mapu u koju želite staviti datoteke sigurnosne kopije. U donjem primjeru, zamijenite bilo koju instancu MAPA sa tom putanjom.

Ako ste izabrali za korištenje sigurnu vezu (HTTPS) kada sigurnosno kopirate, koristite davs:// umjesto dav:// u donjem primjeru.

gvfs-mount dav://KORISNIČKO IME@POSLUŽITELJ:ULAZ/MAPA duplicity --gio dav://KORISNIČKO IME@POSLUŽITELJ:ULAZ/MAPA /tmp/restore Windows dijeljenje

Potražite adresu svojeg ​​poslužitelja, korisničko ime i lozinku i zamijenite instance POSLUŽITELJ, KORISNIČKO IME i LOZINKA u donjem primjeru s tim odgovarajućim vrijednostima.

Možda želite odrediti mapu u koju želite staviti datoteke sigurnosne kopije. U donjem primjeru, zamijenite bilo koju instancu MAPA sa tom putanjom.

Ako ste naveli domenu za vaš Windows poslužitelj, dodajte ga na početak KORISNIČKOG IMENA s točka-zarezom između njih. Npr, domena;korisničko ime.

gvfs-mount smb://KORISNIČKO IME@POSLUŽITELJ/MAPA duplicity --gio smb://KORISNIČKO IME@POSLUŽITELJ/MAPA /tmp/restore
Ručno vraćanje

U slučaju da dvoličnost ne radi za vas, možda postoji malo nade. Format datoteke sigurnosne kopije je kompliciran i nije lako manipulirati s njim. Ali, ako ste očajni vrijedi pokušati.

Ako ste koristili udaljeni poslužitelj ili poslužitelj oblaka za pohranu vaše sigurnosne kopije, najprije preuzmite sve datoteke dvoličnosti i smjestite ih u mapu na vašem računalu. Zatim unesite tu mapu u svom terminalu.

Dvostrukost pohranjuje podatke u malim blokovima zvanim svezci. Neki svezci pripadaju povremenim 'punim' ili svježim sigurnosnim kopijama i drugima u "Uklj" ili uključenim sigurnosnim kopijama. Počevši s potpunom sigurnosnom kopijom skupom svezka počevši od 1 svezka, morat ćete vratiti dio po dio datoteka.

Ako ste šifrirali vaše sigurnosne kopije, najprije ćete morati dešifrirati svezak sa gpg. Napišite što morate duplicity-full.20110127T131352Z.vol1.difftar.gpg:

gpg --output duplicity-full.20110127T131352Z.vol1.difftar --decrypt duplicity-full.20110127T131352Z.vol1.difftar.gpg

Ili da učinite sve odjednom (pobrinite se da imate dovoljno slobodnog prostora!):

gpg --multifile --decrypt duplicity-full.20110127T131352Z.*.difftar.gpg

Sada imate ili .difftar ili .difftar.gz svezak (ovisno o tome jeste li ga morali dešifrirati ili ne). Koristite tar svaki puta kada morate izdvojiti pojedine kopije datoteka:

tar xf duplicity-full.20110127T131352Z.vol1.difftar

Ili ponovno učiniti sve to odjednom:

for t in duplicity-full.20110127T131352Z.*.difftar; do tar xf $t; done

Sada će kopija datoteka biti u multivolume_snapshot i snapshot mapama. Svaka datoteka koja obuhvaća više svezaka biti će u multivolume_snapshot. Recimo da ste napravili sigurnosnu kopiju /home/jane/essay.txt:

cd multivolume_snapshot/home/jane/essay.txt cat * > essay.txt

Da obnovite podatke iz uključenih sigurnosnih kopija, koristite rdiff za zajedničko vraćanje datoteka. Pogledajte man rdiff za korištenje.

 usr/share/help-langpack/hr/deja-dup/credits.page0000644000373100047300000000367212701535751023476 0ustar langpacklangpack00000000000000 Upoznajte tim Zasluge
Razvoj

Andrew Fister

Michael Terry

Michael Vogt

Urban Skudnik

Lars Jegenhorst

Canonical Ltd
Dokumentacija

Michael Terry

Canonical Ltd
Umjetnost

Andreas Nilsson

Jakub Steiner

Lapo Calamandrei

Michael Terry
Prijevod Launchpad Contributions: Michael Terry https://launchpad.net/~mterry gogo https://launchpad.net/~trebelnik-stefina
usr/share/help-langpack/hr/deja-dup/index.page0000644000373100047300000000204612701535751023142 0ustar langpacklangpack00000000000000 Pomoć sigurnosnog kopiranja Pomoć sigurnosnog kopiranja Michael Terry mike@mterry.name 2010,2011

Creative Commons Attribution-Share Alike 3.0 Unported License

 <media type="image" mime="image/png" src="figures/deja-dup-icon.png"/> Pomoć sigurnosnog kopiranja
Sigurnosno kopiranje
Vraćanje datoteka
O <app>Déjà Dup alatu sigurnosnog kopiranja</app>
language-pack-gnome-hr-base/data/hr/0000755000000000000000000000000012704126312014405 5ustar language-pack-gnome-hr-base/data/hr/LC_MESSAGES/0000755000000000000000000000000012704126324016175 5ustar language-pack-gnome-hr-base/data/hr/LC_MESSAGES/gdk-pixbuf.po0000644000000000000000000006610112704126312020576 0ustar # Translation of gtk+ to Croatiann # Copyright (C) Croatiann team # Translators: Automatski Prijevod <>,Denis Lackovic ,Kresimir Kalafatic <>,Mato Kutlić ,pr pr ,Robert Sedak ,Vlatko Kosturjak , msgid "" msgstr "" "Project-Id-Version: gtk+ 0\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gdk-" "pixbuf\n" "POT-Creation-Date: 2015-11-09 14:06-0500\n" "PO-Revision-Date: 2010-08-05 09:22+0000\n" "Last-Translator: Launchpad Translations Administrators \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 05:44+0000\n" "X-Generator: Launchpad (build 17995)\n" "Language: hr\n" #: gdk-pixbuf/gdk-pixbuf-animation.c:156 gdk-pixbuf/gdk-pixbuf-io.c:1084 #: gdk-pixbuf/gdk-pixbuf-io.c:1340 #, c-format msgid "Failed to open file '%s': %s" msgstr "Greška pri otvaranju datoteke '%s': %s" #: gdk-pixbuf/gdk-pixbuf-animation.c:169 gdk-pixbuf/gdk-pixbuf-io.c:969 #, c-format msgid "Image file '%s' contains no data" msgstr "Slika \"%s\" ne sadrži podatke" #: gdk-pixbuf/gdk-pixbuf-animation.c:207 #, c-format msgid "" "Failed to load animation '%s': reason not known, probably a corrupt " "animation file" msgstr "" "Ne mogu učitati animaciju \"%s\": razlog nepoznat, vjerojatno neispravan " "zapis" #: gdk-pixbuf/gdk-pixbuf-animation.c:275 gdk-pixbuf/gdk-pixbuf-io.c:1120 #: gdk-pixbuf/gdk-pixbuf-io.c:1392 #, c-format msgid "" "Failed to load image '%s': reason not known, probably a corrupt image file" msgstr "" "Ne mogu učitati sliku \"%s\": razlog nepoznat, vjerojatno neispravan zapis" #: gdk-pixbuf/gdk-pixbuf.c:161 msgid "Number of Channels" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:162 msgid "The number of samples per pixel" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:171 msgid "Colorspace" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:172 msgid "The colorspace in which the samples are interpreted" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:180 msgid "Has Alpha" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:181 msgid "Whether the pixbuf has an alpha channel" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:194 msgid "Bits per Sample" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:195 msgid "The number of bits per sample" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:204 msgid "Width" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:205 msgid "The number of columns of the pixbuf" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:214 msgid "Height" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:215 msgid "The number of rows of the pixbuf" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:231 msgid "Rowstride" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:232 msgid "" "The number of bytes between the start of a row and the start of the next row" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:241 msgid "Pixels" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:242 msgid "A pointer to the pixel data of the pixbuf" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:256 msgid "Pixel Bytes" msgstr "" #: gdk-pixbuf/gdk-pixbuf.c:257 msgid "Readonly pixel data" msgstr "" #: gdk-pixbuf/gdk-pixbuf-io.c:781 #, c-format msgid "Unable to load image-loading module: %s: %s" msgstr "Ne mogu učitati modul za učitavanje slika: %s: %s" #: gdk-pixbuf/gdk-pixbuf-io.c:796 #, c-format msgid "" "Image-loading module %s does not export the proper interface; perhaps it's " "from a different gdk-pixbuf version?" msgstr "" #: gdk-pixbuf/gdk-pixbuf-io.c:805 gdk-pixbuf/gdk-pixbuf-io.c:856 #, c-format msgid "Image type '%s' is not supported" msgstr "Vrsta slike \"%s\" nije podržana" #: gdk-pixbuf/gdk-pixbuf-io.c:941 #, c-format msgid "Couldn't recognize the image file format for file '%s'" msgstr "Ne mogu prepoznati datotečni format slike za datoteku \"%s\"" #: gdk-pixbuf/gdk-pixbuf-io.c:949 msgid "Unrecognized image file format" msgstr "Nepoznat način zapisa slike" #: gdk-pixbuf/gdk-pixbuf-io.c:1131 #, c-format msgid "Failed to load image '%s': %s" msgstr "Ne mogu učitati sliku \"%s\": %s" #: gdk-pixbuf/gdk-pixbuf-io.c:2161 gdk-pixbuf/io-gdip-utils.c:838 #, c-format msgid "Error writing to image file: %s" msgstr "Greška pri interpretiranju JPEG slike (%s)" #: gdk-pixbuf/gdk-pixbuf-io.c:2203 gdk-pixbuf/gdk-pixbuf-io.c:2324 #, c-format msgid "This build of gdk-pixbuf does not support saving the image format: %s" msgstr "Ovo izdanje programa gdk-pixbuf ne podržava ovu sliku vrste %s" #: gdk-pixbuf/gdk-pixbuf-io.c:2234 msgid "Insufficient memory to save image to callback" msgstr "Nema dovoljno memorije za spremanje slike u originalno mjesto" #: gdk-pixbuf/gdk-pixbuf-io.c:2247 msgid "Failed to open temporary file" msgstr "Nisam uspio otvoriti privremenu datoteku" #: gdk-pixbuf/gdk-pixbuf-io.c:2270 msgid "Failed to read from temporary file" msgstr "Nisam uspio čitati iz privremene datoteke" #: gdk-pixbuf/gdk-pixbuf-io.c:2520 #, c-format msgid "Failed to open '%s' for writing: %s" msgstr "Ne mogu otvoriti '%s' za pisanje: %s" #: gdk-pixbuf/gdk-pixbuf-io.c:2546 #, c-format msgid "" "Failed to close '%s' while writing image, all data may not have been saved: " "%s" msgstr "" "Ne može da zatvori \"%s\" pri upisu slike, moguće je da nisu spremljeni svi " "podaci: %s" #: gdk-pixbuf/gdk-pixbuf-io.c:2767 gdk-pixbuf/gdk-pixbuf-io.c:2819 msgid "Insufficient memory to save image into a buffer" msgstr "Nema dovoljno memorije za spremanje slike u međuspremnik" #: gdk-pixbuf/gdk-pixbuf-io.c:2865 msgid "Error writing to image stream" msgstr "" #: gdk-pixbuf/gdk-pixbuf-loader.c:382 #, c-format msgid "" "Internal error: Image loader module '%s' failed to complete an operation, " "but didn't give a reason for the failure" msgstr "" #: gdk-pixbuf/gdk-pixbuf-loader.c:424 #, c-format msgid "Incremental loading of image type '%s' is not supported" msgstr "Nije podržano postepeno učitavanje slike vrste \"%s\"" #: gdk-pixbuf/gdk-pixbuf-simple-anim.c:161 msgid "Loop" msgstr "" #: gdk-pixbuf/gdk-pixbuf-simple-anim.c:162 msgid "Whether the animation should loop when it reaches the end" msgstr "" #: gdk-pixbuf/gdk-pixdata.c:165 msgid "Image header corrupt" msgstr "Zaglavlje slike je oštećeno" #: gdk-pixbuf/gdk-pixdata.c:170 msgid "Image format unknown" msgstr "Nepoznat format slike" #: gdk-pixbuf/gdk-pixdata.c:175 gdk-pixbuf/gdk-pixdata.c:513 msgid "Image pixel data corrupt" msgstr "Oštećeni podaci o točkama slike" #: gdk-pixbuf/gdk-pixdata.c:457 #, c-format msgid "failed to allocate image buffer of %u byte" msgid_plural "failed to allocate image buffer of %u bytes" msgstr[0] "nisam uspio premjestiti međuspremnik slike od %u bajt" msgstr[1] "nisam uspio premjestiti međuspremnik slike od %u bajta" msgstr[2] "nisam uspio premjestiti međuspremnik slike od %u bajtova" #: gdk-pixbuf/io-ani.c:242 msgid "Unexpected icon chunk in animation" msgstr "Neočekivani dio sličice u animaciji" #: gdk-pixbuf/io-ani.c:340 gdk-pixbuf/io-ani.c:398 gdk-pixbuf/io-ani.c:424 #: gdk-pixbuf/io-ani.c:447 gdk-pixbuf/io-ani.c:474 gdk-pixbuf/io-ani.c:561 msgid "Invalid header in animation" msgstr "Neispravno zaglavlje animacije" #: gdk-pixbuf/io-ani.c:350 gdk-pixbuf/io-ani.c:372 gdk-pixbuf/io-ani.c:456 #: gdk-pixbuf/io-ani.c:483 gdk-pixbuf/io-ani.c:534 gdk-pixbuf/io-ani.c:606 msgid "Not enough memory to load animation" msgstr "Nema dovoljno memorije za učitavanje animacije" #: gdk-pixbuf/io-ani.c:390 gdk-pixbuf/io-ani.c:416 gdk-pixbuf/io-ani.c:435 msgid "Malformed chunk in animation" msgstr "Neispravan dio animacije" #: gdk-pixbuf/io-ani.c:628 msgid "ANI image was truncated or incomplete." msgstr "" #: gdk-pixbuf/io-ani.c:669 msgctxt "image format" msgid "Windows animated cursor" msgstr "" #: gdk-pixbuf/io-bmp.c:227 gdk-pixbuf/io-bmp.c:264 gdk-pixbuf/io-bmp.c:358 #: gdk-pixbuf/io-bmp.c:381 gdk-pixbuf/io-bmp.c:484 msgid "BMP image has bogus header data" msgstr "BMP slika ima neispravno zaglavlje" #: gdk-pixbuf/io-bmp.c:238 gdk-pixbuf/io-bmp.c:421 msgid "Not enough memory to load bitmap image" msgstr "Nema dovoljno memorije za učitavanje slike" #: gdk-pixbuf/io-bmp.c:316 msgid "BMP image has unsupported header size" msgstr "BMP slika sadrži zaglavlje nepodržane veličine" #: gdk-pixbuf/io-bmp.c:345 msgid "Topdown BMP images cannot be compressed" msgstr "" "BMP slike s podacima spremljenima od vrha prema dolje ne mogu biti " "komprimirane" #: gdk-pixbuf/io-bmp.c:705 gdk-pixbuf/io-png.c:531 gdk-pixbuf/io-pnm.c:705 msgid "Premature end-of-file encountered" msgstr "Naišao na prijevremen kraj datoteke" #: gdk-pixbuf/io-bmp.c:1317 msgid "Couldn't allocate memory for saving BMP file" msgstr "Nema dovoljno memorije za spremanje BMP datoteke" #: gdk-pixbuf/io-bmp.c:1358 msgid "Couldn't write to BMP file" msgstr "Ne mogu pisati u BMP datoteku" #: gdk-pixbuf/io-bmp.c:1411 gdk-pixbuf/io-gdip-bmp.c:83 msgctxt "image format" msgid "BMP" msgstr "" #: gdk-pixbuf/io-gdip-emf.c:60 msgctxt "image format" msgid "EMF" msgstr "" #: gdk-pixbuf/io-gdip-gif.c:81 gdk-pixbuf/io-gif.c:1719 msgctxt "image format" msgid "GIF" msgstr "" #: gdk-pixbuf/io-gdip-ico.c:60 gdk-pixbuf/io-ico.c:1268 msgctxt "image format" msgid "Windows icon" msgstr "" #: gdk-pixbuf/io-gdip-jpeg.c:54 gdk-pixbuf/io-jpeg.c:1297 #, c-format msgid "" "JPEG quality must be a value between 0 and 100; value '%s' could not be " "parsed." msgstr "" "Kakvoća JPEG-a mora biti vrijednost između 0 i 100; ne može da razume " "vrijednost ˇ\"%s\"." #: gdk-pixbuf/io-gdip-jpeg.c:69 gdk-pixbuf/io-jpeg.c:1313 #, c-format msgid "" "JPEG quality must be a value between 0 and 100; value '%d' is not allowed." msgstr "" "Kakvoća JPEG-a mora biti vrijednost između 0 i 100; nije dozvoljena " "vrijednost \"%d\"." #: gdk-pixbuf/io-gdip-jpeg.c:137 gdk-pixbuf/io-jpeg.c:1575 msgctxt "image format" msgid "JPEG" msgstr "" #: gdk-pixbuf/io-gdip-tiff.c:83 gdk-pixbuf/io-tiff.c:1018 msgctxt "image format" msgid "TIFF" msgstr "" #: gdk-pixbuf/io-gdip-utils.c:155 #, c-format msgid "Could not allocate memory: %s" msgstr "" #: gdk-pixbuf/io-gdip-utils.c:180 gdk-pixbuf/io-gdip-utils.c:294 #: gdk-pixbuf/io-gdip-utils.c:334 #, c-format msgid "Could not create stream: %s" msgstr "" #: gdk-pixbuf/io-gdip-utils.c:194 #, c-format msgid "Could not seek stream: %s" msgstr "" #: gdk-pixbuf/io-gdip-utils.c:206 #, c-format msgid "Could not read from stream: %s" msgstr "" #: gdk-pixbuf/io-gdip-utils.c:618 msgid "Couldn't load bitmap" msgstr "" #: gdk-pixbuf/io-gdip-utils.c:774 msgid "Couldn't load metafile" msgstr "Nisam mogao učitati metadatoteku" #: gdk-pixbuf/io-gdip-utils.c:879 msgid "Unsupported image format for GDI+" msgstr "" #: gdk-pixbuf/io-gdip-utils.c:886 msgid "Couldn't save" msgstr "" #: gdk-pixbuf/io-gdip-wmf.c:59 msgctxt "image format" msgid "WMF" msgstr "" #: gdk-pixbuf/io-gif.c:220 #, c-format msgid "Failure reading GIF: %s" msgstr "Greška pri čitanju GIF-a: %s" #: gdk-pixbuf/io-gif.c:494 gdk-pixbuf/io-gif.c:1501 gdk-pixbuf/io-gif.c:1668 msgid "GIF file was missing some data (perhaps it was truncated somehow?)" msgstr "GIF datoteci nedostaje nešto podataka (možda je nekako odsječena?)" #: gdk-pixbuf/io-gif.c:503 #, c-format msgid "Internal error in the GIF loader (%s)" msgstr "Unutrašnja greška pri učitavanju GIF-a (%s)" #: gdk-pixbuf/io-gif.c:577 msgid "Stack overflow" msgstr "Prekoračenje stoga" #: gdk-pixbuf/io-gif.c:637 msgid "GIF image loader cannot understand this image." msgstr "Modul za učitavanje GIF slika ne prepoznaje ovu sliku." #: gdk-pixbuf/io-gif.c:666 msgid "Bad code encountered" msgstr "Nađen je neispravan kod" #: gdk-pixbuf/io-gif.c:676 msgid "Circular table entry in GIF file" msgstr "Kružni unos u tabeli GIF datoteke" #: gdk-pixbuf/io-gif.c:864 gdk-pixbuf/io-gif.c:1487 gdk-pixbuf/io-gif.c:1540 #: gdk-pixbuf/io-gif.c:1656 msgid "Not enough memory to load GIF file" msgstr "Nema dovoljno memorije za učitavanje GIF datoteke" #: gdk-pixbuf/io-gif.c:958 msgid "Not enough memory to composite a frame in GIF file" msgstr "Nema dovoljno memorije za kreiranje okvira unutar GIF datoteke" #: gdk-pixbuf/io-gif.c:1130 msgid "GIF image is corrupt (incorrect LZW compression)" msgstr "GIF slika je oštećena (neispravno LZW sažimanje)" #: gdk-pixbuf/io-gif.c:1180 msgid "File does not appear to be a GIF file" msgstr "Izgleda da se ne radi o GIF datoteci" #: gdk-pixbuf/io-gif.c:1192 #, c-format msgid "Version %s of the GIF file format is not supported" msgstr "Izdanje %s GIF načina zapisa nije podržano" #: gdk-pixbuf/io-gif.c:1239 msgid "Resulting GIF image has zero size" msgstr "" #: gdk-pixbuf/io-gif.c:1318 msgid "" "GIF image has no global colormap, and a frame inside it has no local " "colormap." msgstr "" "GIF slika nema opću mapu boja, a kadar u njoj nema zasebnu mapu boja." #: gdk-pixbuf/io-gif.c:1563 msgid "GIF image was truncated or incomplete." msgstr "GIF slika je skraćena ili nepotpuna." #: gdk-pixbuf/io-icns.c:358 #, c-format msgid "Error reading ICNS image: %s" msgstr "" #: gdk-pixbuf/io-icns.c:375 gdk-pixbuf/io-icns.c:452 msgid "Could not decode ICNS file" msgstr "Nisam mogao dekodirati ICNS datoteku" #: gdk-pixbuf/io-icns.c:511 msgctxt "image format" msgid "MacOS X icon" msgstr "" #: gdk-pixbuf/io-ico.c:226 gdk-pixbuf/io-ico.c:240 gdk-pixbuf/io-ico.c:291 #: gdk-pixbuf/io-ico.c:302 gdk-pixbuf/io-ico.c:386 msgid "Invalid header in icon" msgstr "Neispravno zaglavlje sličice" #: gdk-pixbuf/io-ico.c:255 gdk-pixbuf/io-ico.c:312 gdk-pixbuf/io-ico.c:396 #: gdk-pixbuf/io-ico.c:449 gdk-pixbuf/io-ico.c:479 msgid "Not enough memory to load icon" msgstr "Nema dovoljno memorije za učitavanje slike" #: gdk-pixbuf/io-ico.c:338 msgid "Compressed icons are not supported" msgstr "Ne podržava sažete sličice" #: gdk-pixbuf/io-ico.c:434 msgid "Unsupported icon type" msgstr "Nije podržana vrsta sličica" #: gdk-pixbuf/io-ico.c:528 msgid "Not enough memory to load ICO file" msgstr "Nema dovoljno memorije za učitavanje ICO datoteke" #: gdk-pixbuf/io-ico.c:993 msgid "Image too large to be saved as ICO" msgstr "Slika je prevelika da bi se sačuvala kao ICO" #: gdk-pixbuf/io-ico.c:1004 msgid "Cursor hotspot outside image" msgstr "Pokazivač žarišta je van slike" #: gdk-pixbuf/io-ico.c:1027 #, c-format msgid "Unsupported depth for ICO file: %d" msgstr "Nije podržana dubina za ICO datoteku: %d" #: gdk-pixbuf/io-jasper.c:73 msgid "Couldn't allocate memory for stream" msgstr "" #: gdk-pixbuf/io-jasper.c:103 msgid "Couldn't decode image" msgstr "" #: gdk-pixbuf/io-jasper.c:121 msgid "Transformed JPEG2000 has zero width or height" msgstr "" #: gdk-pixbuf/io-jasper.c:135 msgid "Image type currently not supported" msgstr "" #: gdk-pixbuf/io-jasper.c:147 gdk-pixbuf/io-jasper.c:155 msgid "Couldn't allocate memory for color profile" msgstr "" #: gdk-pixbuf/io-jasper.c:181 msgid "Insufficient memory to open JPEG 2000 file" msgstr "" #: gdk-pixbuf/io-jasper.c:260 msgid "Couldn't allocate memory to buffer image data" msgstr "" #: gdk-pixbuf/io-jasper.c:304 msgctxt "image format" msgid "JPEG 2000" msgstr "" #: gdk-pixbuf/io-jpeg.c:124 #, c-format msgid "Error interpreting JPEG image file (%s)" msgstr "Greška pri interpretiranju JPEG slike (%s)" #: gdk-pixbuf/io-jpeg.c:600 msgid "" "Insufficient memory to load image, try exiting some applications to free " "memory" msgstr "" "Nema dovoljno memorije za učitavanje slike, zatvorite neke programe kako bi " "oslobodili memoriju" #: gdk-pixbuf/io-jpeg.c:669 gdk-pixbuf/io-jpeg.c:882 #, c-format msgid "Unsupported JPEG color space (%s)" msgstr "Nije podržan JPEG prostor boja (%s)" #: gdk-pixbuf/io-jpeg.c:781 gdk-pixbuf/io-jpeg.c:1062 gdk-pixbuf/io-jpeg.c:1398 #: gdk-pixbuf/io-jpeg.c:1408 msgid "Couldn't allocate memory for loading JPEG file" msgstr "Ne mogu pronaći dovoljno memorije za učitavanje JPEG datoteke" #: gdk-pixbuf/io-jpeg.c:1036 msgid "Transformed JPEG has zero width or height." msgstr "" #: gdk-pixbuf/io-jpeg.c:1334 #, c-format msgid "" "JPEG x-dpi must be a value between 1 and 65535; value '%s' is not allowed." msgstr "" #: gdk-pixbuf/io-jpeg.c:1355 #, c-format msgid "" "JPEG y-dpi must be a value between 1 and 65535; value '%s' is not allowed." msgstr "" #: gdk-pixbuf/io-jpeg.c:1369 #, c-format msgid "Color profile has invalid length '%u'." msgstr "" #: gdk-pixbuf/io-pixdata.c:150 msgid "Transformed pixbuf has zero width or height." msgstr "" #: gdk-pixbuf/io-pixdata.c:189 msgctxt "image format" msgid "GdkPixdata" msgstr "" #: gdk-pixbuf/io-png.c:54 msgid "Bits per channel of PNG image is invalid." msgstr "Neispravan broj bitova po kanalu PNG slike." #: gdk-pixbuf/io-png.c:135 gdk-pixbuf/io-png.c:671 msgid "Transformed PNG has zero width or height." msgstr "Transformirani PNG ima visinu ili širinu nula." #: gdk-pixbuf/io-png.c:143 msgid "Bits per channel of transformed PNG is not 8." msgstr "Broj bitova po kanalu promijenjenog PNG nije 8." #: gdk-pixbuf/io-png.c:152 msgid "Transformed PNG not RGB or RGBA." msgstr "Transformirani PNG nije RGB ili RGBA." #: gdk-pixbuf/io-png.c:161 msgid "Transformed PNG has unsupported number of channels, must be 3 or 4." msgstr "" "Nije podržan broj kanala u transformiranoj PNG slici; mora biti 3 ili 4." #: gdk-pixbuf/io-png.c:182 #, c-format msgid "Fatal error in PNG image file: %s" msgstr "Kobna greška u PNG slici: %s" #: gdk-pixbuf/io-png.c:320 msgid "Insufficient memory to load PNG file" msgstr "Nema dovoljno memorije za učitavanje PNG datoteke" #: gdk-pixbuf/io-png.c:686 #, c-format msgid "" "Insufficient memory to store a %lu by %lu image; try exiting some " "applications to reduce memory usage" msgstr "" #: gdk-pixbuf/io-png.c:762 msgid "Fatal error reading PNG image file" msgstr "Kobna greška tijekom čitanja PNG slike" #: gdk-pixbuf/io-png.c:812 #, c-format msgid "Fatal error reading PNG image file: %s" msgstr "Nepovratna greška pri čitanju PNG slike: %s" #: gdk-pixbuf/io-png.c:904 msgid "" "Keys for PNG text chunks must have at least 1 and at most 79 characters." msgstr "" "Ključevi za PNG tekstualne odjeljke moraju imati bar 1, a najviše 79 znakova." #: gdk-pixbuf/io-png.c:913 msgid "Keys for PNG text chunks must be ASCII characters." msgstr "Ključevi za PNG tekstualne odjeljke moraju biti ASCII znakovi." #: gdk-pixbuf/io-png.c:927 gdk-pixbuf/io-tiff.c:796 #, c-format msgid "Color profile has invalid length %d." msgstr "" #: gdk-pixbuf/io-png.c:940 #, c-format msgid "" "PNG compression level must be a value between 0 and 9; value '%s' could not " "be parsed." msgstr "" "Razina kompresije PNG datoteke mora biti vrijednost između 0 i9; vrijednost " "'%s' nije u tom rasponu." #: gdk-pixbuf/io-png.c:953 #, c-format msgid "" "PNG compression level must be a value between 0 and 9; value '%d' is not " "allowed." msgstr "" "Razina kompresije PNG datoteke mora biti vrijednost između 0 i9; vrijednost " "'%d' nije dozvoljena." #: gdk-pixbuf/io-png.c:972 #, c-format msgid "PNG x-dpi must be greater than zero; value '%s' is not allowed." msgstr "" #: gdk-pixbuf/io-png.c:992 #, c-format msgid "PNG y-dpi must be greater than zero; value '%s' is not allowed." msgstr "" #: gdk-pixbuf/io-png.c:1041 #, c-format msgid "" "Value for PNG text chunk %s cannot be converted to ISO-8859-1 encoding." msgstr "" "Vrijednost za PNG odjeljak teksta %s se ne može pretvoriti u ISO-8859-1 " "zapis." #: gdk-pixbuf/io-png.c:1207 msgctxt "image format" msgid "PNG" msgstr "" #: gdk-pixbuf/io-pnm.c:246 msgid "PNM loader expected to find an integer, but didn't" msgstr "" "Dio za učitavanje PNM slika je očekivao da naiđe na cijeli broj, ali nije" #: gdk-pixbuf/io-pnm.c:278 msgid "PNM file has an incorrect initial byte" msgstr "PNM datoteka sadrži neispravan početni bajt" #: gdk-pixbuf/io-pnm.c:308 msgid "PNM file is not in a recognized PNM subformat" msgstr "PNM datoteka nije u poznatom PNM podzapisu" #: gdk-pixbuf/io-pnm.c:333 msgid "PNM file has an image width of 0" msgstr "PNM datoteka sadrži sliku širine 0" #: gdk-pixbuf/io-pnm.c:354 msgid "PNM file has an image height of 0" msgstr "PNM datoteka sadrži sliku visine 0" #: gdk-pixbuf/io-pnm.c:377 msgid "Maximum color value in PNM file is 0" msgstr "Najveća vrijednost boje u PNM datoteci je 0" #: gdk-pixbuf/io-pnm.c:385 msgid "Maximum color value in PNM file is too large" msgstr "Najveća vrijednost boje u PNM datoteci je prevelika" #: gdk-pixbuf/io-pnm.c:425 gdk-pixbuf/io-pnm.c:455 gdk-pixbuf/io-pnm.c:500 msgid "Raw PNM image type is invalid" msgstr "Sirova PNM vrsta slike neispravna" #: gdk-pixbuf/io-pnm.c:650 msgid "PNM image loader does not support this PNM subformat" msgstr "Dio za učitavanje PNM slika ne podržava ovaj PNM podzapis" #: gdk-pixbuf/io-pnm.c:737 gdk-pixbuf/io-pnm.c:964 msgid "Raw PNM formats require exactly one whitespace before sample data" msgstr "Sirov PNM zapis zahtjeva točno jedan razmak prije sadržaja" #: gdk-pixbuf/io-pnm.c:764 msgid "Cannot allocate memory for loading PNM image" msgstr "Nema dovoljno memorije za učitavanje PNM slike" #: gdk-pixbuf/io-pnm.c:814 msgid "Insufficient memory to load PNM context struct" msgstr "Nema dovoljno memorije za učitavanje PNM kontekstualne strukture" #: gdk-pixbuf/io-pnm.c:865 msgid "Unexpected end of PNM image data" msgstr "Neočekivan kraj PNM slike" #: gdk-pixbuf/io-pnm.c:993 msgid "Insufficient memory to load PNM file" msgstr "Nema dovoljno memorije za učitavanje PNM datoteke" #: gdk-pixbuf/io-pnm.c:1077 msgctxt "image format" msgid "PNM/PBM/PGM/PPM" msgstr "" #: gdk-pixbuf/io-qtif.c:126 msgid "Input file descriptor is NULL." msgstr "" #: gdk-pixbuf/io-qtif.c:141 msgid "Failed to read QTIF header" msgstr "" #: gdk-pixbuf/io-qtif.c:150 gdk-pixbuf/io-qtif.c:187 gdk-pixbuf/io-qtif.c:454 #, c-format msgid "QTIF atom size too large (%d byte)" msgid_plural "QTIF atom size too large (%d bytes)" msgstr[0] "" msgstr[1] "" #: gdk-pixbuf/io-qtif.c:173 #, c-format msgid "Failed to allocate %d byte for file read buffer" msgid_plural "Failed to allocate %d bytes for file read buffer" msgstr[0] "" msgstr[1] "" #: gdk-pixbuf/io-qtif.c:201 #, c-format msgid "File error when reading QTIF atom: %s" msgstr "" #: gdk-pixbuf/io-qtif.c:238 #, c-format msgid "Failed to skip the next %d byte with seek()." msgid_plural "Failed to skip the next %d bytes with seek()." msgstr[0] "" msgstr[1] "" #: gdk-pixbuf/io-qtif.c:265 msgid "Failed to allocate QTIF context structure." msgstr "" #: gdk-pixbuf/io-qtif.c:325 msgid "Failed to create GdkPixbufLoader object." msgstr "" #: gdk-pixbuf/io-qtif.c:429 msgid "Failed to find an image data atom." msgstr "" #: gdk-pixbuf/io-qtif.c:613 msgctxt "image format" msgid "QuickTime" msgstr "" #: gdk-pixbuf/io-tga.c:151 msgid "Cannot allocate memory for IOBuffer struct" msgstr "Nema dovoljno memorije za strukturu međuspremnika" #: gdk-pixbuf/io-tga.c:170 msgid "Cannot allocate memory for IOBuffer data" msgstr "Nema dovoljno memorije za podatke međuspremnika" #: gdk-pixbuf/io-tga.c:181 msgid "Cannot realloc IOBuffer data" msgstr "Ne mogu ponovno dodijeliti podatke međuspremnika" #: gdk-pixbuf/io-tga.c:211 msgid "Cannot allocate temporary IOBuffer data" msgstr "Nemam dovoljno memorije za privremeni međuspremnik" #: gdk-pixbuf/io-tga.c:383 msgid "Cannot allocate new pixbuf" msgstr "" #: gdk-pixbuf/io-tga.c:723 msgid "Cannot allocate colormap" msgstr "" #: gdk-pixbuf/io-tga.c:747 msgid "Unexpected bitdepth for colormap entries" msgstr "Neočekivan broj boja za stavke mape boja" #: gdk-pixbuf/io-tga.c:766 msgid "Cannot allocate TGA header memory" msgstr "Nemam dovoljno memorije za TGA zaglavlje" #: gdk-pixbuf/io-tga.c:799 msgid "TGA image has invalid dimensions" msgstr "TGA slika je neispravne veličine" #: gdk-pixbuf/io-tga.c:805 gdk-pixbuf/io-tga.c:814 gdk-pixbuf/io-tga.c:824 #: gdk-pixbuf/io-tga.c:834 gdk-pixbuf/io-tga.c:841 msgid "TGA image type not supported" msgstr "TGA zapis slike nije podržan" #: gdk-pixbuf/io-tga.c:888 msgid "Cannot allocate memory for TGA context struct" msgstr "Nemam dovoljno memorije za strukturu TGA konteksta" #: gdk-pixbuf/io-tga.c:953 msgid "Excess data in file" msgstr "Pretjerano mnogo podataka u datoteci" #: gdk-pixbuf/io-tga.c:1032 msgctxt "image format" msgid "Targa" msgstr "" #: gdk-pixbuf/io-tiff.c:107 msgid "Could not get image width (bad TIFF file)" msgstr "Ne može se pročitati širina slike (neispravna TIFF datoteka)" #: gdk-pixbuf/io-tiff.c:115 msgid "Could not get image height (bad TIFF file)" msgstr "Ne može se saznati visina slike (neispravna TIFF datoteka)" #: gdk-pixbuf/io-tiff.c:123 msgid "Width or height of TIFF image is zero" msgstr "Visina ili širina TIFF slike je nula" #: gdk-pixbuf/io-tiff.c:132 gdk-pixbuf/io-tiff.c:141 msgid "Dimensions of TIFF image too large" msgstr "TIFF slika je prevelika" #: gdk-pixbuf/io-tiff.c:165 gdk-pixbuf/io-tiff.c:177 gdk-pixbuf/io-tiff.c:535 msgid "Insufficient memory to open TIFF file" msgstr "Nema dovoljno memorije za otvaranje TIFF datoteke" #: gdk-pixbuf/io-tiff.c:275 msgid "Failed to load RGB data from TIFF file" msgstr "Neuspjelo učitavanje RGB podataka iz TIFF datoteke" #: gdk-pixbuf/io-tiff.c:337 msgid "Failed to open TIFF image" msgstr "Nisam uspio otvoriti TIFF sliku" #: gdk-pixbuf/io-tiff.c:471 gdk-pixbuf/io-tiff.c:484 msgid "Failed to load TIFF image" msgstr "Neuspjelo učitavanje TIFF slike" #: gdk-pixbuf/io-tiff.c:710 msgid "Failed to save TIFF image" msgstr "" #: gdk-pixbuf/io-tiff.c:766 msgid "TIFF compression doesn't refer to a valid codec." msgstr "" #: gdk-pixbuf/io-tiff.c:811 msgid "TIFF bits-per-sample doesn't contain a supported value." msgstr "" #: gdk-pixbuf/io-tiff.c:892 msgid "Failed to write TIFF data" msgstr "" #: gdk-pixbuf/io-tiff.c:910 #, c-format msgid "TIFF x-dpi must be greater than zero; value '%s' is not allowed." msgstr "" #: gdk-pixbuf/io-tiff.c:922 #, c-format msgid "TIFF y-dpi must be greater than zero; value '%s' is not allowed." msgstr "" #: gdk-pixbuf/io-tiff.c:963 msgid "Couldn't write to TIFF file" msgstr "" #: gdk-pixbuf/io-xbm.c:302 msgid "Invalid XBM file" msgstr "Neispravna XBM datoteka" #: gdk-pixbuf/io-xbm.c:312 msgid "Insufficient memory to load XBM image file" msgstr "Nema dovoljno memorije za učitavanje XBM slike" #: gdk-pixbuf/io-xbm.c:460 msgid "Failed to write to temporary file when loading XBM image" msgstr "Neuspio upis u privremenu datoteku pri učitavanju XBM slike" #: gdk-pixbuf/io-xbm.c:499 msgctxt "image format" msgid "XBM" msgstr "" #: gdk-pixbuf/io-xpm.c:467 msgid "No XPM header found" msgstr "Nije nađeno XPM zaglavlje" #: gdk-pixbuf/io-xpm.c:476 msgid "Invalid XPM header" msgstr "Neispravno XPM zaglavlje" #: gdk-pixbuf/io-xpm.c:484 msgid "XPM file has image width <= 0" msgstr "XPM datoteka ima sliku širine <= 0" #: gdk-pixbuf/io-xpm.c:492 msgid "XPM file has image height <= 0" msgstr "XPM datoteka ima sliku visine <= 0" #: gdk-pixbuf/io-xpm.c:500 msgid "XPM has invalid number of chars per pixel" msgstr "XPM ima neispravan broj znakova po točki" #: gdk-pixbuf/io-xpm.c:509 msgid "XPM file has invalid number of colors" msgstr "XPM datoteka ima neispravan broj boja" #: gdk-pixbuf/io-xpm.c:521 gdk-pixbuf/io-xpm.c:530 gdk-pixbuf/io-xpm.c:582 msgid "Cannot allocate memory for loading XPM image" msgstr "Nema dovoljno memorije za učitavanje XPM slike" #: gdk-pixbuf/io-xpm.c:544 msgid "Cannot read XPM colormap" msgstr "" #: gdk-pixbuf/io-xpm.c:776 msgid "Failed to write to temporary file when loading XPM image" msgstr "Neuspio upis u privremenu datoteku pri učitavanju XPM slike" #: gdk-pixbuf/io-xpm.c:815 msgctxt "image format" msgid "XPM" msgstr "" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/evolution-data-server-3.18.po0000644000000000000000000051726712704126312023402 0ustar # Translation of evolution-data-server to Croatiann # Copyright (C) Croatiann team # Translators: Automatski Prijevod <>,Denis Lackovic ,Robert Sedak ,Sasa Poznanovic , msgid "" msgstr "" "Project-Id-Version: evolution-data-server 0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-02-23 12:23+0000\n" "PO-Revision-Date: 2015-10-16 11:30+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 05:08+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../addressbook/backends/file/e-book-backend-file.c:120 #, c-format msgid "Failed to remove file '%s': %s" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:148 #, c-format msgid "Failed to make directory %s: %s" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:419 #, c-format msgid "Failed to create hardlink for resource '%s': %s" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:524 #: ../addressbook/backends/file/e-book-backend-file.c:1256 msgid "No UID in the contact" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:851 #, c-format msgid "Conflicting UIDs found in added contacts" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:990 msgid "Loading..." msgstr "Učitavanje…" #: ../addressbook/backends/file/e-book-backend-file.c:992 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:4357 msgid "Searching..." msgstr "Traženje…" #: ../addressbook/backends/file/e-book-backend-file.c:1284 #, c-format msgid "Tried to modify contact '%s' with out of sync revision" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:1475 #: ../addressbook/backends/file/e-book-backend-file.c:1560 #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:3085 #: ../addressbook/libedata-book/e-book-sqlite.c:7332 #: ../addressbook/libedata-book/e-book-sqlite.c:7401 #, c-format msgid "Contact '%s' not found" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:1620 #: ../addressbook/backends/file/e-book-backend-file.c:1701 #, c-format msgid "Query '%s' not supported" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:1629 #: ../addressbook/backends/file/e-book-backend-file.c:1710 #, c-format msgid "Invalid Query '%s'" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:1975 msgid "Requested to delete an unrelated cursor" msgstr "" #: ../addressbook/backends/file/e-book-backend-file.c:2046 #, c-format msgid "Failed to rename old database from '%s' to '%s': %s" msgstr "" #: ../addressbook/backends/file/e-book-backend-file-migrate-bdb.c:148 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:1166 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:4247 #: ../addressbook/backends/webdav/e-book-backend-webdav.c:384 #: ../addressbook/backends/webdav/e-book-backend-webdav.c:867 #: ../addressbook/libebook-contacts/e-book-contacts-types.c:51 #: ../addressbook/libebook-contacts/e-phone-number.c:56 #: ../addressbook/libebook/e-book.c:1078 #: ../addressbook/libebook/e-book-client.c:2131 #: ../addressbook/libebook/e-book-client.c:2303 #: ../addressbook/libebook/e-book-client.c:2516 #: ../addressbook/libebook/e-book-client.c:2647 #: ../addressbook/libebook/e-book-client.c:2806 #: ../addressbook/libebook/e-book-client.c:2940 #: ../addressbook/libebook/e-book-client.c:3071 #: ../addressbook/libebook/e-book-client.c:3229 #: ../addressbook/libebook/e-book-client.c:3424 #: ../addressbook/libebook/e-book-client.c:3642 #: ../addressbook/libedata-book/e-book-backend-sexp.c:877 #: ../calendar/backends/caldav/e-cal-backend-caldav.c:585 #: ../calendar/backends/caldav/e-cal-backend-caldav.c:616 #: ../calendar/backends/caldav/e-cal-backend-caldav.c:633 #: ../calendar/backends/contacts/e-cal-backend-contacts.c:274 #: ../calendar/libecal/e-cal.c:2336 ../calendar/libecal/e-cal-client.c:279 #: ../calendar/libecal/e-cal-client.c:3492 #: ../calendar/libecal/e-cal-client.c:3665 #: ../calendar/libecal/e-cal-client.c:3929 #: ../calendar/libecal/e-cal-client.c:4170 #: ../calendar/libecal/e-cal-client.c:4360 #: ../calendar/libecal/e-cal-client.c:4553 #: ../calendar/libecal/e-cal-client.c:4762 #: ../calendar/libecal/e-cal-client.c:4931 #: ../calendar/libecal/e-cal-client.c:5134 #: ../calendar/libecal/e-cal-client.c:5284 #: ../calendar/libecal/e-cal-client.c:5478 #: ../calendar/libecal/e-cal-client.c:5631 #: ../calendar/libecal/e-cal-client.c:5848 #: ../calendar/libecal/e-cal-client.c:6002 #: ../calendar/libecal/e-cal-client.c:6228 #: ../calendar/libecal/e-cal-client.c:6424 #: ../calendar/libecal/e-cal-client.c:6787 #: ../calendar/libecal/e-cal-client.c:7009 #: ../camel/providers/imapx/camel-imapx-server.c:2975 #: ../camel/providers/imapx/camel-imapx-server.c:2985 #: ../camel/providers/imapx/camel-imapx-server.c:2997 #: ../libebackend/e-server-side-source.c:497 ../libedataserver/e-client.c:190 msgid "Unknown error" msgstr "Nepoznata greška" #. Query for new contacts asynchronously #: ../addressbook/backends/google/e-book-backend-google.c:814 msgid "Querying for updated contacts…" msgstr "Slanje upita za ažuriranim kontaktima..." #. Run the query asynchronously #: ../addressbook/backends/google/e-book-backend-google.c:998 msgid "Querying for updated groups…" msgstr "Slanje upita za ažuriranim grupama..." #: ../addressbook/backends/google/e-book-backend-google.c:1792 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:4999 #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1503 msgid "The backend does not support bulk additions" msgstr "" #: ../addressbook/backends/google/e-book-backend-google.c:1949 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:5135 #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1625 msgid "The backend does not support bulk modifications" msgstr "" #: ../addressbook/backends/google/e-book-backend-google.c:2158 #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1725 msgid "The backend does not support bulk removals" msgstr "" #: ../addressbook/backends/google/e-book-backend-google.c:2280 msgid "Loading…" msgstr "Učitavanje..." #. System Group: My Contacts #: ../addressbook/backends/google/e-book-google-utils.c:1653 #: ../services/evolution-source-registry/builtin/system-address-book.source.in.h:1 #: ../services/evolution-source-registry/builtin/system-calendar.source.in.h:1 #: ../services/evolution-source-registry/builtin/system-memo-list.source.in.h:1 #: ../services/evolution-source-registry/builtin/system-task-list.source.in.h:1 msgid "Personal" msgstr "Osobno" #. System Group: Friends #: ../addressbook/backends/google/e-book-google-utils.c:1655 msgid "Friends" msgstr "Prijatelji" #. System Group: Family #: ../addressbook/backends/google/e-book-google-utils.c:1657 msgid "Family" msgstr "Obitelj" #. System Group: Coworkers #: ../addressbook/backends/google/e-book-google-utils.c:1659 msgid "Coworkers" msgstr "Suradnici" #. Translators: An error message shown to a user when trying to do an #. * operation on the LDAP address book which is not connected to the server #: ../addressbook/backends/ldap/e-book-backend-ldap.c:114 msgid "Not connected" msgstr "Nije spojeno" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:892 msgid "Failed to bind using either v3 or v2 binds" msgstr "" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:1016 msgid "Reconnecting to LDAP server..." msgstr "Ponovno spajanje na LDAP poslužitelj..." #: ../addressbook/backends/ldap/e-book-backend-ldap.c:1147 msgid "Invalid DN syntax" msgstr "Neispravna DN sintaksa" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:1163 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:4246 #, c-format msgid "LDAP error 0x%x (%s)" msgstr "" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:1775 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:2098 #, c-format msgid "%s: NULL returned from ldap_first_entry" msgstr "" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:2028 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:2156 #, c-format msgid "%s: Unhandled result type %d returned" msgstr "" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:2289 #: ../addressbook/backends/ldap/e-book-backend-ldap.c:2416 #, c-format msgid "%s: Unhandled search result type %d returned" msgstr "" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:4195 msgid "Receiving LDAP search results..." msgstr "Primanje rezultata pretrage sa LDAP poslužitelja" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:4379 msgid "Error performing search" msgstr "Greška kod izvršavanja pretrage" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:4512 #, c-format msgid "Downloading contacts (%d)..." msgstr "" #: ../addressbook/backends/ldap/e-book-backend-ldap.c:5082 msgid "Adding contact to LDAP server..." msgstr "Dodavanje kontakta na LDAP poslužitelj..." #: ../addressbook/backends/ldap/e-book-backend-ldap.c:5157 msgid "Modifying contact from LDAP server..." msgstr "Promjena kontakta na LDAP poslužitelju..." #: ../addressbook/backends/ldap/e-book-backend-ldap.c:5223 msgid "Removing contact from LDAP server..." msgstr "Uklanjanje kontakta s LDAP poslužitelja..." #: ../addressbook/backends/ldap/e-book-backend-ldap.c:5618 #, c-format msgid "Failed to get the DN for user '%s'" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:588 #: ../calendar/backends/http/e-cal-backend-http.c:512 #, c-format msgid "Malformed URI: %s" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:836 msgid "Loading Addressbook summary..." msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:864 #, c-format msgid "PROPFIND on webdav failed with HTTP status %d (%s)" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:883 msgid "No response body in webdav PROPFIND result" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:944 #, c-format msgid "Loading Contacts (%d%%)" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1358 msgid "Cannot transform SoupURI to string" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1554 #, c-format msgid "Create resource '%s' failed with HTTP status %d (%s)" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1656 msgid "Contact on server changed -> not modifying" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1664 #, c-format msgid "Modify contact failed with HTTP status %d (%s)" msgstr "" #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1757 #: ../addressbook/backends/webdav/e-book-backend-webdav.c:1773 #, c-format msgid "DELETE failed with HTTP status %d" msgstr "" #: ../addressbook/libebook-contacts/e-book-contacts-types.c:40 msgid "No such book" msgstr "Nema takve knjige" #: ../addressbook/libebook-contacts/e-book-contacts-types.c:42 #: ../addressbook/libedata-book/e-data-book.c:384 msgid "Contact not found" msgstr "Kontakt nije pronađen" #: ../addressbook/libebook-contacts/e-book-contacts-types.c:44 #: ../addressbook/libedata-book/e-data-book.c:385 msgid "Contact ID already exists" msgstr "ID kontakta već postoji" #: ../addressbook/libebook-contacts/e-book-contacts-types.c:46 msgid "No such source" msgstr "Nema takvog izvora" #: ../addressbook/libebook-contacts/e-book-contacts-types.c:48 #: ../addressbook/libedata-book/e-data-book.c:401 msgid "No space" msgstr "Nema prostora" #. Dummy row as EContactField starts from 1 #: ../addressbook/libebook-contacts/e-contact.c:130 msgid "Unique ID" msgstr "Jedinstveni ID" #. FILE_AS is not really a structured field - we use a getter/setter #. * so we can generate its value if necessary in the getter #. Translators: This is an EContact field description, in this case it's a #. * preferred user's description (or display name) of the contact. Note 'File' is a verb here. #: ../addressbook/libebook-contacts/e-contact.c:135 msgid "File Under" msgstr "Datoteka pod" #. URI of the book to which the contact belongs to #: ../addressbook/libebook-contacts/e-contact.c:137 msgid "Book UID" msgstr "" #. Name fields #. FN isn't really a structured field - we use a getter/setter #. * so we can set the N property (since evo 1.4 works fine with #. * vcards that don't even have a N attribute. *sigh*) #: ../addressbook/libebook-contacts/e-contact.c:143 msgid "Full Name" msgstr "Puno ime" #: ../addressbook/libebook-contacts/e-contact.c:144 msgid "Given Name" msgstr "Dano ime" #: ../addressbook/libebook-contacts/e-contact.c:145 msgid "Family Name" msgstr "Obiteljsko ime" #: ../addressbook/libebook-contacts/e-contact.c:146 msgid "Nickname" msgstr "Nadimak" #. Email fields #: ../addressbook/libebook-contacts/e-contact.c:149 msgid "Email 1" msgstr "E-pošta 1" #: ../addressbook/libebook-contacts/e-contact.c:150 msgid "Email 2" msgstr "E-pošta 2" #: ../addressbook/libebook-contacts/e-contact.c:151 msgid "Email 3" msgstr "E-pošta 3" #: ../addressbook/libebook-contacts/e-contact.c:152 msgid "Email 4" msgstr "E-pošta 4" #: ../addressbook/libebook-contacts/e-contact.c:154 msgid "Mailer" msgstr "Program e-pošte" #. Address Labels #: ../addressbook/libebook-contacts/e-contact.c:157 msgid "Home Address Label" msgstr "Natpis kućne adrese" #: ../addressbook/libebook-contacts/e-contact.c:158 msgid "Work Address Label" msgstr "Natpis poslovne adrese" #: ../addressbook/libebook-contacts/e-contact.c:159 msgid "Other Address Label" msgstr "Natpis ostalih adresa" #. Phone fields #: ../addressbook/libebook-contacts/e-contact.c:162 msgid "Assistant Phone" msgstr "Telefon pomoćnika" #: ../addressbook/libebook-contacts/e-contact.c:163 msgid "Business Phone" msgstr "Poslovni telefon" #: ../addressbook/libebook-contacts/e-contact.c:164 msgid "Business Phone 2" msgstr "Poslovni telefon 2" #: ../addressbook/libebook-contacts/e-contact.c:165 msgid "Business Fax" msgstr "Poslovni faks" #: ../addressbook/libebook-contacts/e-contact.c:166 msgid "Callback Phone" msgstr "Telefon povratnog poziva" #: ../addressbook/libebook-contacts/e-contact.c:167 msgid "Car Phone" msgstr "Telefon (u autu)" #: ../addressbook/libebook-contacts/e-contact.c:168 msgid "Company Phone" msgstr "Telefon poduzeća" #: ../addressbook/libebook-contacts/e-contact.c:169 msgid "Home Phone" msgstr "Kućni telefon" #: ../addressbook/libebook-contacts/e-contact.c:170 msgid "Home Phone 2" msgstr "Kućni telefon 2" #: ../addressbook/libebook-contacts/e-contact.c:171 msgid "Home Fax" msgstr "Kućni faks" #: ../addressbook/libebook-contacts/e-contact.c:172 msgid "ISDN" msgstr "ISDN" #: ../addressbook/libebook-contacts/e-contact.c:173 msgid "Mobile Phone" msgstr "Mobilni telefon" #: ../addressbook/libebook-contacts/e-contact.c:174 msgid "Other Phone" msgstr "Drugi telefon" #: ../addressbook/libebook-contacts/e-contact.c:175 msgid "Other Fax" msgstr "Drugi faks" #: ../addressbook/libebook-contacts/e-contact.c:176 msgid "Pager" msgstr "Dojavljivač" #: ../addressbook/libebook-contacts/e-contact.c:177 msgid "Primary Phone" msgstr "Glavni telefon" #: ../addressbook/libebook-contacts/e-contact.c:178 msgid "Radio" msgstr "Radio" #: ../addressbook/libebook-contacts/e-contact.c:179 msgid "Telex" msgstr "Telex" #. To translators: TTY is Teletypewriter #: ../addressbook/libebook-contacts/e-contact.c:181 msgid "TTY" msgstr "TTY" #. Organizational fields #: ../addressbook/libebook-contacts/e-contact.c:184 msgid "Organization" msgstr "Organizacija" #: ../addressbook/libebook-contacts/e-contact.c:185 msgid "Organizational Unit" msgstr "Organizacijska jedinica" #: ../addressbook/libebook-contacts/e-contact.c:186 msgid "Office" msgstr "Ured" #: ../addressbook/libebook-contacts/e-contact.c:187 msgid "Title" msgstr "Titula" #: ../addressbook/libebook-contacts/e-contact.c:188 msgid "Role" msgstr "Uloga" #: ../addressbook/libebook-contacts/e-contact.c:189 msgid "Manager" msgstr "Upravitelj" #: ../addressbook/libebook-contacts/e-contact.c:190 msgid "Assistant" msgstr "Pomoćnik" #. Web fields #: ../addressbook/libebook-contacts/e-contact.c:193 msgid "Homepage URL" msgstr "Adresa početne stranice" #: ../addressbook/libebook-contacts/e-contact.c:194 msgid "Weblog URL" msgstr "Weblog URL" #. Contact categories #: ../addressbook/libebook-contacts/e-contact.c:197 msgid "Categories" msgstr "Kategorije" #. Collaboration fields #: ../addressbook/libebook-contacts/e-contact.c:200 msgid "Calendar URI" msgstr "Adresa kalendara" #: ../addressbook/libebook-contacts/e-contact.c:201 msgid "Free/Busy URL" msgstr "Slobodna/zauzeta adresa" #: ../addressbook/libebook-contacts/e-contact.c:202 msgid "ICS Calendar" msgstr "ICS kalendar" #: ../addressbook/libebook-contacts/e-contact.c:203 msgid "Video Conferencing URL" msgstr "URL video konferencije" #. Misc fields #: ../addressbook/libebook-contacts/e-contact.c:206 msgid "Spouse's Name" msgstr "Ime supružnika" #: ../addressbook/libebook-contacts/e-contact.c:207 msgid "Note" msgstr "Bilješka" #. Instant messaging fields #: ../addressbook/libebook-contacts/e-contact.c:210 msgid "AIM Home Screen Name 1" msgstr "AIM kućno ekransko ime 1" #: ../addressbook/libebook-contacts/e-contact.c:211 msgid "AIM Home Screen Name 2" msgstr "AIM kućno ekransko ime 2" #: ../addressbook/libebook-contacts/e-contact.c:212 msgid "AIM Home Screen Name 3" msgstr "AIM kućno ekransko ime 3" #: ../addressbook/libebook-contacts/e-contact.c:213 msgid "AIM Work Screen Name 1" msgstr "AIM poslovno ekransko ime 3" #: ../addressbook/libebook-contacts/e-contact.c:214 msgid "AIM Work Screen Name 2" msgstr "AIM poslovno ekransko ime 2" #: ../addressbook/libebook-contacts/e-contact.c:215 msgid "AIM Work Screen Name 3" msgstr "AIM poslovno ekransko ime 3" #: ../addressbook/libebook-contacts/e-contact.c:216 msgid "GroupWise Home Screen Name 1" msgstr "GroupWise kućno ekransko ime 1" #: ../addressbook/libebook-contacts/e-contact.c:217 msgid "GroupWise Home Screen Name 2" msgstr "GroupWise kućno ekransko ime 2" #: ../addressbook/libebook-contacts/e-contact.c:218 msgid "GroupWise Home Screen Name 3" msgstr "GroupWise kućno ekransko ime 3" #: ../addressbook/libebook-contacts/e-contact.c:219 msgid "GroupWise Work Screen Name 1" msgstr "GroupWise poslovno ekransko ime 1" #: ../addressbook/libebook-contacts/e-contact.c:220 msgid "GroupWise Work Screen Name 2" msgstr "GroupWise poslovno ekransko ime 2" #: ../addressbook/libebook-contacts/e-contact.c:221 msgid "GroupWise Work Screen Name 3" msgstr "GroupWise poslovno ekransko ime 3" #: ../addressbook/libebook-contacts/e-contact.c:222 msgid "Jabber Home ID 1" msgstr "Jabber kućni ID 1" #: ../addressbook/libebook-contacts/e-contact.c:223 msgid "Jabber Home ID 2" msgstr "Jabber kućno ime ID 2" #: ../addressbook/libebook-contacts/e-contact.c:224 msgid "Jabber Home ID 3" msgstr "Jabber kućno ime ID 3" #: ../addressbook/libebook-contacts/e-contact.c:225 msgid "Jabber Work ID 1" msgstr "Jabber poslovno ime ID 1" #: ../addressbook/libebook-contacts/e-contact.c:226 msgid "Jabber Work ID 2" msgstr "Jabber poslovno ime ID 2" #: ../addressbook/libebook-contacts/e-contact.c:227 msgid "Jabber Work ID 3" msgstr "Jabber poslovno ime ID 3" #: ../addressbook/libebook-contacts/e-contact.c:228 msgid "Yahoo! Home Screen Name 1" msgstr "Yahoo! kućno ekransko ime 1" #: ../addressbook/libebook-contacts/e-contact.c:229 msgid "Yahoo! Home Screen Name 2" msgstr "Yahoo! kućno ekransko ime 2" #: ../addressbook/libebook-contacts/e-contact.c:230 msgid "Yahoo! Home Screen Name 3" msgstr "Yahoo! kućno ekransko ime 3" #: ../addressbook/libebook-contacts/e-contact.c:231 msgid "Yahoo! Work Screen Name 1" msgstr "Yahoo! ekransko ime na poslu 1" #: ../addressbook/libebook-contacts/e-contact.c:232 msgid "Yahoo! Work Screen Name 2" msgstr "Yahoo! ekransko ime na poslu 2" #: ../addressbook/libebook-contacts/e-contact.c:233 msgid "Yahoo! Work Screen Name 3" msgstr "Yahoo! ekransko ime na poslu 3" #: ../addressbook/libebook-contacts/e-contact.c:234 msgid "MSN Home Screen Name 1" msgstr "MSN kućno ekransko ime 1" #: ../addressbook/libebook-contacts/e-contact.c:235 msgid "MSN Home Screen Name 2" msgstr "MSN kućno ekransko ime 2" #: ../addressbook/libebook-contacts/e-contact.c:236 msgid "MSN Home Screen Name 3" msgstr "MSN kućno ekransko ime 3" #: ../addressbook/libebook-contacts/e-contact.c:237 msgid "MSN Work Screen Name 1" msgstr "MSN ekransko ime na poslu 1" #: ../addressbook/libebook-contacts/e-contact.c:238 msgid "MSN Work Screen Name 2" msgstr "MSN ekransko ime na poslu 2" #: ../addressbook/libebook-contacts/e-contact.c:239 msgid "MSN Work Screen Name 3" msgstr "MSN ekransko ime na poslu 3" #: ../addressbook/libebook-contacts/e-contact.c:240 msgid "ICQ Home ID 1" msgstr "ICQ kućni ID 1" #: ../addressbook/libebook-contacts/e-contact.c:241 msgid "ICQ Home ID 2" msgstr "ICQ kućni ID 2" #: ../addressbook/libebook-contacts/e-contact.c:242 msgid "ICQ Home ID 3" msgstr "ICQ kućni ID 3" #: ../addressbook/libebook-contacts/e-contact.c:243 msgid "ICQ Work ID 1" msgstr "ICQ poslovni ID 1" #: ../addressbook/libebook-contacts/e-contact.c:244 msgid "ICQ Work ID 2" msgstr "ICQ poslovni ID 2" #: ../addressbook/libebook-contacts/e-contact.c:245 msgid "ICQ Work ID 3" msgstr "ICQ poslovni ID 3" #. Last modified time #: ../addressbook/libebook-contacts/e-contact.c:248 msgid "Last Revision" msgstr "Zadnja revizija" #. Translators: This is an EContact field description, in this case it's a #. * virtual field, which returns either name of the contact or the organization #. * name, recognized by multiple other fields, where the first filled is used. #: ../addressbook/libebook-contacts/e-contact.c:252 msgid "Name or Org" msgstr "Ime ili organizacija" #. Address fields #: ../addressbook/libebook-contacts/e-contact.c:255 msgid "Address List" msgstr "Popis adresa" #: ../addressbook/libebook-contacts/e-contact.c:256 msgid "Home Address" msgstr "Kućna adresa" #: ../addressbook/libebook-contacts/e-contact.c:257 msgid "Work Address" msgstr "Poslovna adresa" #: ../addressbook/libebook-contacts/e-contact.c:258 msgid "Other Address" msgstr "Druga adresa" #. Contact categories #: ../addressbook/libebook-contacts/e-contact.c:261 msgid "Category List" msgstr "Popis kategorija" #. Photo/Logo #: ../addressbook/libebook-contacts/e-contact.c:264 msgid "Photo" msgstr "Fotografija" #: ../addressbook/libebook-contacts/e-contact.c:265 msgid "Logo" msgstr "Logotip" #. Translators: This is an EContact field description, in this case it's a name #. * of the contact, as specified in http://tools.ietf.org/html/rfc6350#section-6.2.2 #: ../addressbook/libebook-contacts/e-contact.c:269 #: ../libedataserverui/e-webdav-discover-widget.c:153 msgid "Name" msgstr "Ime" #: ../addressbook/libebook-contacts/e-contact.c:270 msgid "Email List" msgstr "Popis e-pošte" #. Instant messaging fields #: ../addressbook/libebook-contacts/e-contact.c:273 msgid "AIM Screen Name List" msgstr "AIM popis ekranskih imena" #: ../addressbook/libebook-contacts/e-contact.c:274 msgid "GroupWise ID List" msgstr "GroupWise ID popis" #: ../addressbook/libebook-contacts/e-contact.c:275 msgid "Jabber ID List" msgstr "Jabber ID popis" #: ../addressbook/libebook-contacts/e-contact.c:276 msgid "Yahoo! Screen Name List" msgstr "Yahoo! popis ekranskih imena" #: ../addressbook/libebook-contacts/e-contact.c:277 msgid "MSN Screen Name List" msgstr "MSN popis ekranskih imena" #: ../addressbook/libebook-contacts/e-contact.c:278 msgid "ICQ ID List" msgstr "ICQ ID popis" #: ../addressbook/libebook-contacts/e-contact.c:280 msgid "Wants HTML Mail" msgstr "Želi HTML poštu" #. Translators: This is an EContact field description, in this case it's a #. * field describing whether it's a Contact list (list of email addresses) or a #. * regular contact for one person/organization/... #: ../addressbook/libebook-contacts/e-contact.c:285 msgid "List" msgstr "Popis" #. Translators: This is an EContact field description, in this case it's a flag #. * used to determine whether when sending to Contact lists the addresses should be #. * shown or not to other recipients - basically whether to use BCC field or CC #. * message header when sending messages to this Contact list. #: ../addressbook/libebook-contacts/e-contact.c:290 msgid "List Shows Addresses" msgstr "" #: ../addressbook/libebook-contacts/e-contact.c:292 msgid "Birth Date" msgstr "Datum rođenja" #: ../addressbook/libebook-contacts/e-contact.c:293 #: ../calendar/backends/contacts/e-cal-backend-contacts.c:948 msgid "Anniversary" msgstr "Obljetnica" #. Security fields #: ../addressbook/libebook-contacts/e-contact.c:296 msgid "X.509 Certificate" msgstr "X.509 certifikat" #: ../addressbook/libebook-contacts/e-contact.c:297 msgid "PGP Certificate" msgstr "" #: ../addressbook/libebook-contacts/e-contact.c:299 msgid "Gadu-Gadu Home ID 1" msgstr "Gadu-Gadu kućni ID 1" #: ../addressbook/libebook-contacts/e-contact.c:300 msgid "Gadu-Gadu Home ID 2" msgstr "Gadu-Gadu kućni ID 2" #: ../addressbook/libebook-contacts/e-contact.c:301 msgid "Gadu-Gadu Home ID 3" msgstr "Gadu-Gadu kućni ID 3" #: ../addressbook/libebook-contacts/e-contact.c:302 msgid "Gadu-Gadu Work ID 1" msgstr "Gadu-Gadu poslovni ID 1" #: ../addressbook/libebook-contacts/e-contact.c:303 msgid "Gadu-Gadu Work ID 2" msgstr "Gadu-Gadu poslovni ID 2" #: ../addressbook/libebook-contacts/e-contact.c:304 msgid "Gadu-Gadu Work ID 3" msgstr "Gadu-Gadu poslovni ID 3" #: ../addressbook/libebook-contacts/e-contact.c:305 msgid "Gadu-Gadu ID List" msgstr "Gadu-Gadu ID popis" #. Geo information #: ../addressbook/libebook-contacts/e-contact.c:308 msgid "Geographic Information" msgstr "Zemljopisne informacije" #: ../addressbook/libebook-contacts/e-contact.c:310 msgid "Telephone" msgstr "Telefon" #: ../addressbook/libebook-contacts/e-contact.c:312 msgid "Skype Home Name 1" msgstr "Skype kućno ime 1" #: ../addressbook/libebook-contacts/e-contact.c:313 msgid "Skype Home Name 2" msgstr "Skype kućno ime 2" #: ../addressbook/libebook-contacts/e-contact.c:314 msgid "Skype Home Name 3" msgstr "Skype kućno ime 3" #: ../addressbook/libebook-contacts/e-contact.c:315 msgid "Skype Work Name 1" msgstr "Skype poslovno ime 1" #: ../addressbook/libebook-contacts/e-contact.c:316 msgid "Skype Work Name 2" msgstr "Skype poslovno ime 2" #: ../addressbook/libebook-contacts/e-contact.c:317 msgid "Skype Work Name 3" msgstr "Skype poslovno ime 3" #: ../addressbook/libebook-contacts/e-contact.c:318 msgid "Skype Name List" msgstr "Skype popis imena" #: ../addressbook/libebook-contacts/e-contact.c:320 msgid "SIP address" msgstr "SIP adresa" #: ../addressbook/libebook-contacts/e-contact.c:322 msgid "Google Talk Home Name 1" msgstr "Google Talk kućno ime 1" #: ../addressbook/libebook-contacts/e-contact.c:323 msgid "Google Talk Home Name 2" msgstr "Google Talk kućno ime 2" #: ../addressbook/libebook-contacts/e-contact.c:324 msgid "Google Talk Home Name 3" msgstr "Google Talk kućno ime 3" #: ../addressbook/libebook-contacts/e-contact.c:325 msgid "Google Talk Work Name 1" msgstr "Google Talk poslovno ime 1" #: ../addressbook/libebook-contacts/e-contact.c:326 msgid "Google Talk Work Name 2" msgstr "Google Talk poslovno ime 2" #: ../addressbook/libebook-contacts/e-contact.c:327 msgid "Google Talk Work Name 3" msgstr "Google Talk poslovno ime 3" #: ../addressbook/libebook-contacts/e-contact.c:328 msgid "Google Talk Name List" msgstr "Google Talk popis imena" #: ../addressbook/libebook-contacts/e-contact.c:330 msgid "Twitter Name List" msgstr "" #: ../addressbook/libebook-contacts/e-contact.c:1660 #: ../addressbook/libebook/e-destination.c:918 msgid "Unnamed List" msgstr "Neimenovani popis" #: ../addressbook/libebook-contacts/e-phone-number.c:41 msgid "The library was built without phone number support." msgstr "" #: ../addressbook/libebook-contacts/e-phone-number.c:43 msgid "The phone number parser reported a yet unknown error code." msgstr "" #: ../addressbook/libebook-contacts/e-phone-number.c:45 msgid "Not a phone number" msgstr "" #: ../addressbook/libebook-contacts/e-phone-number.c:47 msgid "Invalid country calling code" msgstr "" #: ../addressbook/libebook-contacts/e-phone-number.c:49 msgid "" "Remaining text after the country calling code is too short for a phone number" msgstr "" #: ../addressbook/libebook-contacts/e-phone-number.c:51 msgid "Text is too short for a phone number" msgstr "" #: ../addressbook/libebook-contacts/e-phone-number.c:53 msgid "Text is too long for a phone number" msgstr "" #: ../addressbook/libebook/e-book-client.c:931 #, c-format msgid "Unknown book property '%s'" msgstr "Nepoznato svojstvo knjige '%s'" #: ../addressbook/libebook/e-book-client.c:946 #, c-format msgid "Cannot change value of book property '%s'" msgstr "Promjena svojstva knjige '%s' nije moguće" #: ../addressbook/libebook/e-book-client.c:1390 #: ../addressbook/libebook/e-book-client.c:1621 #: ../addressbook/libebook/e-book-client.c:1898 #: ../calendar/libecal/e-cal-client.c:1717 #: ../calendar/libecal/e-cal-client.c:1955 #, c-format msgid "Unable to connect to '%s': " msgstr "" #: ../addressbook/libebook/e-book-client-view.c:868 #: ../calendar/libecal/e-cal-client-view.c:681 #, c-format msgid "Client disappeared" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:905 #: ../addressbook/libedata-book/e-book-sqlite.c:2229 #, c-format msgid "Error introspecting unknown summary field '%s'" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:1515 #: ../addressbook/libedata-book/e-book-sqlite.c:1368 msgid "Error parsing regular expression" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:1560 #: ../addressbook/libedata-book/e-book-sqlite.c:1852 ../camel/camel-db.c:751 #, c-format msgid "Insufficient memory" msgstr "Nedovoljno memorije" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:1697 #, c-format msgid "Invalid contact field '%d' specified in summary" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:1731 #: ../addressbook/libedata-book/e-book-sqlite.c:579 #, c-format msgid "" "Contact field '%s' of type '%s' specified in summary, but only boolean, " "string and string list field types are supported" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:3073 #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:4169 #, c-format msgid "" "Full search_contacts are not stored in cache. vcards cannot be returned." msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:4300 #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:4393 #: ../addressbook/libedata-book/e-book-sqlite.c:5807 #, c-format msgid "Query contained unsupported elements" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:4304 #, c-format msgid "Invalid Query" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:4328 #, c-format msgid "" "Full search_contacts are not stored in cache. Hence only summary query is " "supported." msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:4397 #: ../addressbook/libedata-book/e-data-book.c:396 #: ../addressbook/libedata-book/e-data-book.c:1146 #: ../calendar/libedata-cal/e-data-cal.c:428 #: ../calendar/libedata-cal/e-data-cal.c:1427 ../libedataserver/e-client.c:177 #, c-format msgid "Invalid query" msgstr "Nevažeći upit" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:4440 #, c-format msgid "" "Full vcards are not stored in cache. Hence only summary query is supported." msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:5263 #, c-format msgid "Unable to remove the db file: errno %d" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:6050 #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:6450 #, c-format msgid "Only summary queries are supported by EbSdbCursor" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:6057 #, c-format msgid "At least one sort field must be specified to use an EbSdbCursor" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:6071 #, c-format msgid "Cannot sort by a field that is not in the summary" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:6078 #, c-format msgid "Cannot sort by a field which may have multiple values" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:6211 #: ../addressbook/libedata-book/e-book-sqlite.c:8106 #, c-format msgid "" "Tried to step a cursor in reverse, but cursor is already at the beginning of " "the contact list" msgstr "" #: ../addressbook/libedata-book/e-book-backend-sqlitedb.c:6219 #: ../addressbook/libedata-book/e-book-sqlite.c:8114 #, c-format msgid "" "Tried to step a cursor forwards, but cursor is already at the end of the " "contact list" msgstr "" #: ../addressbook/libedata-book/e-book-sqlite.c:545 #, c-format msgid "Unsupported contact field '%d' specified in summary" msgstr "" #: ../addressbook/libedata-book/e-book-sqlite.c:1925 msgid "" "Cannot upgrade contacts database from a legacy database with more than one " "addressbook. Delete one of the entries in the 'folders' table first." msgstr "" #: ../addressbook/libedata-book/e-book-sqlite.c:5800 #, c-format msgid "Invalid query: %s" msgstr "Nevaljali upit: %s" #: ../addressbook/libedata-book/e-book-sqlite.c:5975 msgid "Invalid query for EbSqlCursor" msgstr "" #: ../addressbook/libedata-book/e-book-sqlite.c:7928 msgid "At least one sort field must be specified to use an EbSqlCursor" msgstr "" #: ../addressbook/libedata-book/e-book-sqlite.c:7946 msgid "Cannot sort by a field that is not a string type" msgstr "" #: ../addressbook/libedata-book/e-data-book.c:380 #: ../calendar/libedata-cal/e-data-cal.c:409 msgid "Success" msgstr "Uspjeh" #: ../addressbook/libedata-book/e-data-book.c:381 #: ../calendar/libecal/e-cal.c:2304 ../calendar/libedata-cal/e-data-cal.c:410 #: ../libedataserver/e-client.c:144 msgid "Backend is busy" msgstr "Pozadinska aplikacija je zauzeta" #: ../addressbook/libedata-book/e-data-book.c:382 #: ../calendar/libedata-cal/e-data-cal.c:411 ../libedataserver/e-client.c:154 msgid "Repository offline" msgstr "Repozitorij odspojen" #: ../addressbook/libedata-book/e-data-book.c:383 #: ../calendar/libecal/e-cal.c:2318 ../calendar/libedata-cal/e-data-cal.c:412 #: ../libedataserver/e-client.c:161 msgid "Permission denied" msgstr "Pristup odbijen" #: ../addressbook/libedata-book/e-data-book.c:386 #: ../calendar/libedata-cal/e-data-cal.c:417 msgid "Authentication Failed" msgstr "Provjera vjerodostojnosti neuspješna" #: ../addressbook/libedata-book/e-data-book.c:387 #: ../calendar/libedata-cal/e-data-cal.c:418 msgid "Authentication Required" msgstr "Potrebna je provjera vjerodostojnosti" #: ../addressbook/libedata-book/e-data-book.c:388 #: ../calendar/libedata-cal/e-data-cal.c:419 msgid "Unsupported field" msgstr "Nepodržano polje" #: ../addressbook/libedata-book/e-data-book.c:389 #: ../calendar/libedata-cal/e-data-cal.c:421 ../libedataserver/e-client.c:169 msgid "Unsupported authentication method" msgstr "Način provjere vjerodostojnosti nije podržan" #: ../addressbook/libedata-book/e-data-book.c:390 #: ../calendar/libedata-cal/e-data-cal.c:422 ../libedataserver/e-client.c:171 msgid "TLS not available" msgstr "TLS nedostupan" #: ../addressbook/libedata-book/e-data-book.c:391 msgid "Address book does not exist" msgstr "Adresar ne postoji" #: ../addressbook/libedata-book/e-data-book.c:392 msgid "Book removed" msgstr "Knjiga uklonjena" #: ../addressbook/libedata-book/e-data-book.c:393 #: ../calendar/libedata-cal/e-data-cal.c:425 msgid "Not available in offline mode" msgstr "Nije dostupno u radu bez mreže" #: ../addressbook/libedata-book/e-data-book.c:394 #: ../calendar/libedata-cal/e-data-cal.c:426 ../libedataserver/e-client.c:173 msgid "Search size limit exceeded" msgstr "Prekoračeno dužinsko ograničenje pretrage" #: ../addressbook/libedata-book/e-data-book.c:395 #: ../calendar/libedata-cal/e-data-cal.c:427 ../libedataserver/e-client.c:175 msgid "Search time limit exceeded" msgstr "Prekoračeno vremensko ograničenje pretrage" #: ../addressbook/libedata-book/e-data-book.c:397 #: ../calendar/libedata-cal/e-data-cal.c:429 ../libedataserver/e-client.c:179 msgid "Query refused" msgstr "Upit odbijen" #: ../addressbook/libedata-book/e-data-book.c:398 #: ../calendar/libedata-cal/e-data-cal.c:430 ../libedataserver/e-client.c:165 msgid "Could not cancel" msgstr "Nemoguće otkazati" #. { E_DATA_BOOK_STATUS_OTHER_ERROR, N_("Other error") }, #. { OtherError, N_("Other error") }, #: ../addressbook/libedata-book/e-data-book.c:400 #: ../calendar/libedata-cal/e-data-cal.c:432 msgid "Invalid server version" msgstr "Neispravna inačica poslužitelja" #: ../addressbook/libedata-book/e-data-book.c:402 #: ../calendar/libecal/e-cal.c:2302 ../calendar/libedata-cal/e-data-cal.c:433 #: ../libedataserver/e-client.c:142 msgid "Invalid argument" msgstr "Nevaljali argument" #. Translators: The string for NOT_SUPPORTED error #: ../addressbook/libedata-book/e-data-book.c:404 #: ../calendar/libecal/e-cal.c:1059 ../calendar/libecal/e-cal.c:1427 #: ../calendar/libecal/e-cal.c:1909 ../calendar/libecal/e-cal.c:2341 #: ../calendar/libedata-cal/e-data-cal.c:435 ../libedataserver/e-client.c:167 #, c-format msgid "Not supported" msgstr "Nije podržano" #: ../addressbook/libedata-book/e-data-book.c:405 #: ../calendar/libedata-cal/e-data-cal.c:436 ../libedataserver/e-client.c:185 msgid "Backend is not opened yet" msgstr "Pozadinski servis još nije otvoren" #: ../addressbook/libedata-book/e-data-book.c:406 #: ../libedataserver/e-client.c:187 msgid "Object is out of sync" msgstr "" #: ../addressbook/libedata-book/e-data-book.c:414 #: ../calendar/libedata-cal/e-data-cal.c:444 ../libedataserver/e-client.c:183 msgid "Other error" msgstr "Druga greška" #: ../addressbook/libedata-book/e-data-book.c:1171 #: ../calendar/libedata-cal/e-data-cal.c:1452 msgid "Invalid query: " msgstr "Neispravan upit: " #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1420 msgid "Cannot open book: " msgstr "Otvaranje knjige nije moguće: " #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1458 msgid "Cannot refresh address book: " msgstr "Osvježavanje adrese knjige nije moguće: " #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1497 msgid "Cannot get contact: " msgstr "Dobivanje kontakta nije moguće: " #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1546 msgid "Cannot get contact list: " msgstr "Dobivanje popisa kontakata nije moguće: " #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1602 msgid "Cannot get contact list uids: " msgstr "Dobivanje UID-a popisa kontakata nije moguće: " #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1653 msgid "Cannot add contact: " msgstr "Dodavanje kontakta nije moguće: " #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1706 msgid "Cannot modify contacts: " msgstr "" #. Translators: This is prefix to a detailed error message #: ../addressbook/libedata-book/e-data-book.c:1759 msgid "Cannot remove contacts: " msgstr "Uklanjanje kontakata nije moguće: " #: ../addressbook/libedata-book/e-data-book-cursor.c:776 msgid "Cursor does not support setting the search expression" msgstr "" #: ../addressbook/libedata-book/e-data-book-cursor.c:859 msgid "Cursor does not support step" msgstr "" #: ../addressbook/libedata-book/e-data-book-cursor.c:942 msgid "Cursor does not support alphabetic indexes" msgstr "" #: ../addressbook/libedata-book/e-data-book-cursor-sqlite.c:268 msgid "Unrecognized cursor origin" msgstr "" #: ../addressbook/libedata-book/e-data-book-cursor-sqlite.c:336 msgid "Out of sync revision while moving cursor" msgstr "" #: ../addressbook/libedata-book/e-data-book-cursor-sqlite.c:430 msgid "Alphabetic index was set for incorrect locale" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:583 #, c-format msgid "Server is unreachable (%s)" msgstr "Poslužitelj je nedostupan (%s)" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:614 #, c-format msgid "Failed to connect to a server using SSL: %s" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:630 #, c-format msgid "Unexpected HTTP status code %d returned (%s) for URI: %s" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:651 msgid "CalDAV backend is not loaded yet" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:1100 #: ../libedataserver/e-webdav-discover.c:146 msgid "Invalid Redirect URL" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:2955 #, c-format msgid "Cannot create local cache folder '%s'" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:3035 #, c-format msgid "" "Server is unreachable, calendar is opened in read-only mode.\n" "Error message: %s" msgstr "" "Poslužitelj je nedostupan, kalendar je otvoren samo za čitanje.\n" "Poruka greške: %s" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:4123 msgid "CalDAV does not support bulk additions" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:4226 msgid "CalDAV does not support bulk modifications" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:4507 msgid "CalDAV does not support bulk removals" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:5189 msgid "Calendar doesn't support Free/Busy" msgstr "Kalendar ne podržava Slobodno/Zauzeto" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:5198 msgid "Schedule outbox url not found" msgstr "" #: ../calendar/backends/caldav/e-cal-backend-caldav.c:5295 msgid "Unexpected result in schedule-response" msgstr "" #: ../calendar/backends/contacts/e-cal-backend-contacts.c:950 msgid "Birthday" msgstr "Rođendan" #: ../calendar/backends/contacts/e-cal-backend-contacts.c:986 #, c-format msgid "Birthday: %s" msgstr "Rođendan: %s" #: ../calendar/backends/contacts/e-cal-backend-contacts.c:1017 #, c-format msgid "Anniversary: %s" msgstr "Godišnjica: %s" #: ../calendar/backends/file/e-cal-backend-file.c:245 msgid "Cannot save calendar data: Malformed URI." msgstr "Nemoguće spremiti kalendarske podatke: Krivo oblikovan URI." #: ../calendar/backends/file/e-cal-backend-file.c:252 #: ../calendar/backends/file/e-cal-backend-file.c:258 msgid "Cannot save calendar data" msgstr "Nemoguće spremiti kalendarske podatke" #: ../calendar/backends/http/e-cal-backend-http.c:581 #, c-format msgid "Redirected to Invalid URI" msgstr "Preusmjereno na neispravni URI" #: ../calendar/backends/http/e-cal-backend-http.c:640 #, c-format msgid "Bad file format." msgstr "Neispravan oblik datoteke." #: ../calendar/backends/http/e-cal-backend-http.c:650 #, c-format msgid "Not a calendar." msgstr "Nije kalendar." #: ../calendar/backends/http/e-cal-backend-http.c:954 #: ../calendar/backends/weather/e-cal-backend-weather.c:709 msgid "Could not create cache file" msgstr "Neuspjelo stvaranje datoteke privremene memorije" #: ../calendar/backends/weather/e-cal-backend-weather.c:195 msgid "Could not retrieve weather data" msgstr "Nemoguće dobiti podatke o vremenu" #: ../calendar/backends/weather/e-cal-backend-weather.c:378 msgid "Weather: Fog" msgstr "Vrijeme: magla" #: ../calendar/backends/weather/e-cal-backend-weather.c:379 msgid "Weather: Cloudy Night" msgstr "Vrijeme: oblačna noć" #: ../calendar/backends/weather/e-cal-backend-weather.c:380 msgid "Weather: Cloudy" msgstr "Vrijeme: oblačno" #: ../calendar/backends/weather/e-cal-backend-weather.c:381 msgid "Weather: Overcast" msgstr "Vrijeme: oblačno" #: ../calendar/backends/weather/e-cal-backend-weather.c:382 msgid "Weather: Showers" msgstr "Vrijeme: pljuskovi" #: ../calendar/backends/weather/e-cal-backend-weather.c:383 msgid "Weather: Snow" msgstr "Vrijeme: snijeg" #: ../calendar/backends/weather/e-cal-backend-weather.c:384 msgid "Weather: Clear Night" msgstr "Vrijeme: vedra noć" #: ../calendar/backends/weather/e-cal-backend-weather.c:385 msgid "Weather: Sunny" msgstr "Vrijeme: sunčano" #: ../calendar/backends/weather/e-cal-backend-weather.c:386 msgid "Weather: Thunderstorms" msgstr "Vrijeme: grmljavina" #. TRANSLATOR: This is the temperature in degrees Fahrenheit (\302\260 is U+00B0 DEGREE SIGN) #: ../calendar/backends/weather/e-cal-backend-weather.c:412 #, c-format msgid "%.1f °F" msgstr "" #. TRANSLATOR: This is the temperature in degrees Celsius (\302\260 is U+00B0 DEGREE SIGN) #: ../calendar/backends/weather/e-cal-backend-weather.c:415 #, c-format msgid "%.1f °C" msgstr "" #. TRANSLATOR: This is the temperature in kelvin #: ../calendar/backends/weather/e-cal-backend-weather.c:418 #, c-format msgid "%.1f K" msgstr "" #: ../calendar/backends/weather/e-cal-backend-weather.c:424 #, c-format msgid "%.1f" msgstr "" #: ../calendar/backends/weather/e-cal-backend-weather.c:589 #: ../calendar/backends/weather/e-cal-backend-weather.c:617 msgid "Forecast" msgstr "Prognoza" #: ../calendar/libecal/e-cal.c:2306 msgid "Repository is offline" msgstr "Repozitorij nije priključen na mrežu" #: ../calendar/libecal/e-cal.c:2308 ../calendar/libecal/e-cal-client.c:266 msgid "No such calendar" msgstr "Ne postoji takav kalendar" #: ../calendar/libecal/e-cal.c:2310 ../calendar/libecal/e-cal-client.c:268 #: ../calendar/libedata-cal/e-data-cal.c:414 msgid "Object not found" msgstr "Objekt nije nađen" #: ../calendar/libecal/e-cal.c:2312 ../calendar/libecal/e-cal-client.c:270 #: ../calendar/libedata-cal/e-data-cal.c:415 msgid "Invalid object" msgstr "Neispravni objekt" #: ../calendar/libecal/e-cal.c:2314 msgid "URI not loaded" msgstr "URI nije učitan" #: ../calendar/libecal/e-cal.c:2316 msgid "URI already loaded" msgstr "URI je već učitan" #: ../calendar/libecal/e-cal.c:2320 msgid "Unknown User" msgstr "Nepoznat korisnik" #: ../calendar/libecal/e-cal.c:2322 ../calendar/libecal/e-cal-client.c:274 #: ../calendar/libedata-cal/e-data-cal.c:416 msgid "Object ID already exists" msgstr "ID objekta već postoji" #: ../calendar/libecal/e-cal.c:2324 msgid "Protocol not supported" msgstr "Protokol nije podržan" #: ../calendar/libecal/e-cal.c:2326 msgid "Operation has been canceled" msgstr "Radnja je otkazana" #: ../calendar/libecal/e-cal.c:2328 msgid "Could not cancel operation" msgstr "Nemoguće otkazati operaciju" #: ../calendar/libecal/e-cal.c:2330 ../libedataserver/e-client.c:150 msgid "Authentication failed" msgstr "Ovjera nije uspjela" #: ../calendar/libecal/e-cal.c:2332 #: ../camel/providers/smtp/camel-smtp-transport.c:1119 #: ../libedataserver/e-client.c:152 msgid "Authentication required" msgstr "Potrebna ovjera" #: ../calendar/libecal/e-cal.c:2334 msgid "A D-Bus exception has occurred" msgstr "Dogodila se D-Bus iznimka" #: ../calendar/libecal/e-cal.c:2338 msgid "No error" msgstr "Nema greške" #: ../calendar/libecal/e-cal-client.c:272 #: ../calendar/libedata-cal/e-data-cal.c:424 msgid "Unknown user" msgstr "Nepoznati korisnik" #: ../calendar/libecal/e-cal-client.c:276 #: ../calendar/libedata-cal/e-data-cal.c:413 msgid "Invalid range" msgstr "Nepodržan raspon" #: ../calendar/libecal/e-cal-client.c:1065 #, c-format msgid "Unknown calendar property '%s'" msgstr "Nepoznato svojstvo kalendara '%s'" #: ../calendar/libecal/e-cal-client.c:1080 #, c-format msgid "Cannot change value of calendar property '%s'" msgstr "Promjena vrijednosti svojstva kalendara '%s' nije moguća" #: ../calendar/libecal/e-cal-component.c:1349 msgid "Untitled appointment" msgstr "Neimenovani zakazani sastanak" #: ../calendar/libecal/e-cal-recur.c:4046 msgid "1st" msgstr "1." #: ../calendar/libecal/e-cal-recur.c:4047 msgid "2nd" msgstr "2." #: ../calendar/libecal/e-cal-recur.c:4048 msgid "3rd" msgstr "3." #: ../calendar/libecal/e-cal-recur.c:4049 msgid "4th" msgstr "4." #: ../calendar/libecal/e-cal-recur.c:4050 msgid "5th" msgstr "5." #: ../calendar/libecal/e-cal-recur.c:4051 msgid "6th" msgstr "6." #: ../calendar/libecal/e-cal-recur.c:4052 msgid "7th" msgstr "7." #: ../calendar/libecal/e-cal-recur.c:4053 msgid "8th" msgstr "8." #: ../calendar/libecal/e-cal-recur.c:4054 msgid "9th" msgstr "9." #: ../calendar/libecal/e-cal-recur.c:4055 msgid "10th" msgstr "10." #: ../calendar/libecal/e-cal-recur.c:4056 msgid "11th" msgstr "11." #: ../calendar/libecal/e-cal-recur.c:4057 msgid "12th" msgstr "12." #: ../calendar/libecal/e-cal-recur.c:4058 msgid "13th" msgstr "13." #: ../calendar/libecal/e-cal-recur.c:4059 msgid "14th" msgstr "14." #: ../calendar/libecal/e-cal-recur.c:4060 msgid "15th" msgstr "15." #: ../calendar/libecal/e-cal-recur.c:4061 msgid "16th" msgstr "16." #: ../calendar/libecal/e-cal-recur.c:4062 msgid "17th" msgstr "17." #: ../calendar/libecal/e-cal-recur.c:4063 msgid "18th" msgstr "18." #: ../calendar/libecal/e-cal-recur.c:4064 msgid "19th" msgstr "19." #: ../calendar/libecal/e-cal-recur.c:4065 msgid "20th" msgstr "20." #: ../calendar/libecal/e-cal-recur.c:4066 msgid "21st" msgstr "21." #: ../calendar/libecal/e-cal-recur.c:4067 msgid "22nd" msgstr "22." #: ../calendar/libecal/e-cal-recur.c:4068 msgid "23rd" msgstr "23." #: ../calendar/libecal/e-cal-recur.c:4069 msgid "24th" msgstr "24." #: ../calendar/libecal/e-cal-recur.c:4070 msgid "25th" msgstr "25." #: ../calendar/libecal/e-cal-recur.c:4071 msgid "26th" msgstr "26." #: ../calendar/libecal/e-cal-recur.c:4072 msgid "27th" msgstr "27." #: ../calendar/libecal/e-cal-recur.c:4073 msgid "28th" msgstr "28." #: ../calendar/libecal/e-cal-recur.c:4074 msgid "29th" msgstr "29." #: ../calendar/libecal/e-cal-recur.c:4075 msgid "30th" msgstr "30." #: ../calendar/libecal/e-cal-recur.c:4076 msgid "31st" msgstr "31." #: ../calendar/libecal/e-cal-util.c:706 ../calendar/libecal/e-cal-util.c:733 msgctxt "Priority" msgid "High" msgstr "Najviši" #: ../calendar/libecal/e-cal-util.c:708 ../calendar/libecal/e-cal-util.c:735 msgctxt "Priority" msgid "Normal" msgstr "Normalan" #: ../calendar/libecal/e-cal-util.c:710 ../calendar/libecal/e-cal-util.c:737 msgctxt "Priority" msgid "Low" msgstr "Nizak" #. An empty string is the same as 'None'. #: ../calendar/libecal/e-cal-util.c:731 msgctxt "Priority" msgid "Undefined" msgstr "Neodređen" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:85 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1063 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1379 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1506 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1555 #, c-format msgid "\"%s\" expects one argument" msgstr "\"%s\" očekuje jedan argument" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:92 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:674 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1386 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1394 #, c-format msgid "\"%s\" expects the first argument to be a string" msgstr "\"%s\" očekuje da prvi argument bude znakovni niz" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:167 #, c-format msgid "\"%s\" expects two or three arguments" msgstr "\"%s\" očekuje dva ili tri argumenta" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:174 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:263 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:325 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:824 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1070 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1455 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1513 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1562 #, c-format msgid "\"%s\" expects the first argument to be a time_t" msgstr "\"%s\" očekuje da prvi argument bude time_t" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:183 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:271 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:335 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:833 #, c-format msgid "\"%s\" expects the second argument to be a time_t" msgstr "\"%s\" očekuje da drugi argument bude time_t" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:193 #, c-format msgid "\"%s\" expects the third argument to be a string" msgstr "\"%s\" očekuje da treći argument bude znakovni niz" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:255 #, c-format msgid "\"%s\" expects none or two arguments" msgstr "" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:318 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:667 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:817 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1448 #, c-format msgid "\"%s\" expects two arguments" msgstr "\"%s\" očekuje dva argumenta" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:603 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:626 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:749 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:781 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:988 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1021 #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1340 #, c-format msgid "\"%s\" expects no arguments" msgstr "\"%s\" ne očekuje argumente" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:683 #, c-format msgid "\"%s\" expects the second argument to be a string" msgstr "\"%s\" očekuje da drugi argument bude znakovni niz" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:714 #, c-format msgid "" "\"%s\" expects the first argument to be either \"any\", \"summary\", or " "\"description\", or \"location\", or \"attendee\", or \"organizer\", or " "\"classification\"" msgstr "" "\"%s\" očekuje da prvi argument bude \"išta\", \"sažetak\", \"opis\", " "\"lokacija\", \"sudionik\", \"organizator\" ili \"klasifikacija\"" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:885 #, c-format msgid "\"%s\" expects at least one argument" msgstr "\"%s\" očekuje barem jedan argument" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:900 #, c-format msgid "" "\"%s\" expects all arguments to be strings or one and only one argument to " "be a boolean false (#f)" msgstr "" "\"%s\" očekuje da svi argumenti budu znakovni nizovi, a da samo jedan " "argument bude booleovo netočno (#f)" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1403 #, c-format msgid "\"%s\" expects the first argument to be an ISO 8601 date/time string" msgstr "\"%s\" očekuje da prvi argument bude ISO 8601 vrijeme/datum niz" #: ../calendar/libedata-cal/e-cal-backend-sexp.c:1464 #, c-format msgid "\"%s\" expects the second argument to be an integer" msgstr "\"%s\" očekuje da drugi argument bude cijeli broj" #: ../calendar/libedata-cal/e-data-cal.c:420 msgid "Unsupported method" msgstr "Nepodržana metoda" #: ../calendar/libedata-cal/e-data-cal.c:423 msgid "Calendar does not exist" msgstr "Kalendar ne postoji" #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:1645 msgid "Cannot open calendar: " msgstr "Otvaranje kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:1682 msgid "Cannot refresh calendar: " msgstr "Osvježavanje kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:1723 msgid "Cannot retrieve calendar object path: " msgstr "Učitavanje putanje objekta kalendara nije moguće: : " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:1775 msgid "Cannot retrieve calendar object list: " msgstr "Učitavanje popisa objekata kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:1832 msgid "Cannot retrieve calendar free/busy list: " msgstr "Učitavanje slobodan/zauzet popisa kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:1882 msgid "Cannot create calendar object: " msgstr "Stvaranje objekta kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:1950 msgid "Cannot modify calendar object: " msgstr "Uređivanje objekta kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:2028 msgid "Cannot remove calendar object: " msgstr "Uklanjanje objekta kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:2114 msgid "Cannot receive calendar objects: " msgstr "Primanje objekata kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:2157 msgid "Cannot send calendar objects: " msgstr "Slanje objekata kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:2209 msgid "Could not retrieve attachment uris: " msgstr "Učitavanje URI-ja privitaka nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:2254 msgid "Could not discard reminder: " msgstr "Poništavanje podsjetnika nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:2295 msgid "Could not retrieve calendar time zone: " msgstr "Dobivanje vremenske zone kalendara nije moguće: " #. Translators: This is prefix to a detailed error message #: ../calendar/libedata-cal/e-data-cal.c:2335 msgid "Could not add calendar time zone: " msgstr "Dodavanje vremenske zone kalendara nije moguće: " #: ../camel/camel-cipher-context.c:199 #, c-format msgid "Signing is not supported by this cipher" msgstr "Ovaj logaritam ne podržava potpisivanje" #: ../camel/camel-cipher-context.c:212 #, c-format msgid "Verifying is not supported by this cipher" msgstr "Ovaj logaritam ne podržava potvrđivanje" #: ../camel/camel-cipher-context.c:228 #, c-format msgid "Encryption is not supported by this cipher" msgstr "Ovaj algoritam ne podržava šifriranje" #: ../camel/camel-cipher-context.c:242 #, c-format msgid "Decryption is not supported by this cipher" msgstr "Ovaj logaritam ne podržava dešifriranje" #: ../camel/camel-cipher-context.c:358 msgid "Signing message" msgstr "Potpisivanje poruke" #: ../camel/camel-cipher-context.c:648 msgid "Encrypting message" msgstr "Šifriranje poruke" #: ../camel/camel-cipher-context.c:820 msgid "Decrypting message" msgstr "Dešifriranje poruke" #: ../camel/camel-data-cache.c:179 #, c-format msgid "Unable to create cache path" msgstr "Neuspjelo stvaranje putanje privremene memorije" #: ../camel/camel-data-cache.c:449 msgid "Empty cache file" msgstr "" #: ../camel/camel-data-cache.c:522 #, c-format msgid "Could not remove cache entry: %s: %s" msgstr "Nemoguće ukloniti unos privremene memorije: %s: %s" #: ../camel/camel-db.c:810 ../camel/providers/local/camel-mbox-store.c:906 #, c-format msgid "Could not rename '%s' to %s: %s" msgstr "Nemoguće preimenovati '%s' u %s: %s" #: ../camel/camel-filter-driver.c:914 ../camel/camel-filter-search.c:798 #, c-format msgid "Failed to create child process '%s': %s" msgstr "Neuspjelo stvaranje nasljednog procesa \"%s\": %s" #: ../camel/camel-filter-driver.c:962 #, c-format msgid "Invalid message stream received from %s: %s" msgstr "Neispravan niz poruka primljen od %s: %s" #: ../camel/camel-filter-driver.c:1169 ../camel/camel-filter-driver.c:1178 msgid "Syncing folders" msgstr "Usklađivanje mapa" #: ../camel/camel-filter-driver.c:1276 #, c-format msgid "Error parsing filter: %s: %s" msgstr "Greška kod obrađivanja filtera: %s: %s" #: ../camel/camel-filter-driver.c:1287 #, c-format msgid "Error executing filter: %s: %s" msgstr "Greška kod izvršavanja filtera: %s: %s" #: ../camel/camel-filter-driver.c:1383 #, c-format msgid "Unable to open spool folder" msgstr "Neuspjelo otvoranje mape za smještanje reda ( spool )" #: ../camel/camel-filter-driver.c:1395 #, c-format msgid "Unable to process spool folder" msgstr "Neuspjelo obrađivanje mape s redom" #: ../camel/camel-filter-driver.c:1418 #, c-format msgid "Getting message %d (%d%%)" msgstr "Primanje poruke %d (%d%%)" #: ../camel/camel-filter-driver.c:1427 ../camel/camel-filter-driver.c:1449 #, c-format msgid "Failed on message %d" msgstr "Greška kod poruke %d" #: ../camel/camel-filter-driver.c:1468 ../camel/camel-filter-driver.c:1582 msgid "Syncing folder" msgstr "Usklađivanje mape" #: ../camel/camel-filter-driver.c:1473 ../camel/camel-filter-driver.c:1590 msgid "Complete" msgstr "Završeno" #: ../camel/camel-filter-driver.c:1536 #, c-format msgid "Getting message %d of %d" msgstr "Primanje poruke %d od %d" #: ../camel/camel-filter-driver.c:1554 #, c-format msgid "Failed at message %d of %d" msgstr "Greška kod poruke %d od %d" #: ../camel/camel-filter-driver.c:1749 ../camel/camel-filter-driver.c:1776 #, c-format msgid "Execution of filter '%s' failed: " msgstr "" #: ../camel/camel-filter-driver.c:1766 #, c-format msgid "Error parsing filter '%s': %s: %s" msgstr "" #: ../camel/camel-filter-driver.c:1785 #, c-format msgid "Error executing filter '%s': %s: %s" msgstr "" #: ../camel/camel-filter-search.c:139 msgid "Failed to retrieve message" msgstr "Neuspjelo primanje poruke" #: ../camel/camel-filter-search.c:538 msgid "Invalid arguments to (system-flag)" msgstr "Neispravni argumenti za (sustavska zastavica)" #: ../camel/camel-filter-search.c:556 msgid "Invalid arguments to (user-tag)" msgstr "Neipsravni argumenti za (korisnička-oznaka)" #: ../camel/camel-filter-search.c:1068 msgid "Invalid arguments to (message-location)" msgstr "" #: ../camel/camel-filter-search.c:1149 ../camel/camel-filter-search.c:1160 #, c-format msgid "Error executing filter search: %s: %s" msgstr "Greška pri izvršavanju filtrirane pretrage: %s: %s" #: ../camel/camel-folder.c:321 #, c-format msgid "Learning new spam message in '%s'" msgid_plural "Learning new spam messages in '%s'" msgstr[0] "Učenje o novoj neželjenoj poruci u '%s'" msgstr[1] "Učenje o novim neželjenim porukama u '%s'" msgstr[2] "Učenje o novim neželjenim porukama u '%s'" #: ../camel/camel-folder.c:361 #, c-format msgid "Learning new ham message in '%s'" msgid_plural "Learning new ham messages in '%s'" msgstr[0] "Učenje nove ham poruke u '%s'" msgstr[1] "Učenje novih ham poruka u '%s'" msgstr[2] "Učenje novih ham poruka u '%s'" #: ../camel/camel-folder.c:409 #, c-format msgid "Filtering new message in '%s'" msgid_plural "Filtering new messages in '%s'" msgstr[0] "Filtriranje nove poruke u '%s'" msgstr[1] "Filtriranje nove poruke u '%s'" msgstr[2] "Filtriranje novih poruka u '%s'" #: ../camel/camel-folder.c:1015 #: ../camel/providers/local/camel-maildir-folder.c:330 msgid "Moving messages" msgstr "Premještanje poruka" #: ../camel/camel-folder.c:1018 msgid "Copying messages" msgstr "Kopiranje poruka" #: ../camel/camel-folder.c:1060 #, c-format msgid "Quota information not supported for folder '%s'" msgstr "Informacije o kvoti nisu podržane za direktorij '%s'" #: ../camel/camel-folder.c:1152 #, c-format msgid "Filtering folder '%s'" msgstr "" #: ../camel/camel-folder.c:2878 #, c-format msgid "Expunging folder '%s'" msgstr "" #: ../camel/camel-folder.c:3009 #, c-format msgid "Retrieving message '%s' in %s" msgstr "Preuzimanje poruke '%s' u %s" #: ../camel/camel-folder.c:3200 #, c-format msgid "Retrieving quota information for '%s'" msgstr "Preuzimanje informacije o kvoti za '%s'" #: ../camel/camel-folder.c:3497 #, c-format msgid "Refreshing folder '%s'" msgstr "" #. Translators: The '%s' is an element type name, part of an expressing language #: ../camel/camel-folder-search.c:915 ../camel/camel-folder-search.c:957 #, c-format msgid "(%s) requires a single bool result" msgstr "(%s) zahtijeva jedan Boolov rezultat" #. Translators: Each '%s' is an element type name, part of an expressing language #: ../camel/camel-folder-search.c:992 #, c-format msgid "(%s) not allowed inside %s" msgstr "(%s) nije dozvoljen unutar %s" #. Translators: The '%s' is an element type name, part of an expressing language #: ../camel/camel-folder-search.c:999 ../camel/camel-folder-search.c:1007 #, c-format msgid "(%s) requires a match type string" msgstr "(%s) zahtijeva podudaranje vrste niza podataka" #. Translators: The '%s' is an element type name, part of an expressing language #: ../camel/camel-folder-search.c:1035 #, c-format msgid "(%s) expects an array result" msgstr "(%s) očekuje tablični rezultat" #. Translators: The '%s' is an element type name, part of an expressing language #: ../camel/camel-folder-search.c:1045 #, c-format msgid "(%s) requires the folder set" msgstr "(%s) zahtijeva postavljen direktorij" #: ../camel/camel-folder-search.c:1962 ../camel/camel-folder-search.c:2131 #, c-format msgid "" "Cannot parse search expression: %s:\n" "%s" msgstr "" "Nemoguće obraditi traženi izraz: %s:\n" "%s" #: ../camel/camel-folder-search.c:1974 ../camel/camel-folder-search.c:2143 #, c-format msgid "" "Error executing search expression: %s:\n" "%s" msgstr "" "Greška kod izvršavanja traženog izraza: %s:\n" "%s" #: ../camel/camel-folder-summary.c:2139 #, c-format msgid "Release unused memory for folder '%s'" msgstr "" #: ../camel/camel-folder-summary.c:2351 #, c-format msgid "Update preview data for folder '%s'" msgstr "" #: ../camel/camel-gpg-context.c:728 ../camel/camel-gpg-context.c:733 #: ../camel/camel-gpg-context.c:1400 #, c-format msgid "Failed to execute gpg: %s" msgstr "Neuspjelo izvršavanje gpg-a: %s" #: ../camel/camel-gpg-context.c:733 #: ../camel/providers/smtp/camel-smtp-transport.c:1122 msgid "Unknown" msgstr "Nepoznato" #: ../camel/camel-gpg-context.c:798 #, c-format msgid "" "Unexpected GnuPG status message encountered:\n" "\n" "%s" msgstr "" "Dobijen neočekivan GnuPG status poruke:\n" "\n" "%s" #: ../camel/camel-gpg-context.c:834 #, c-format msgid "Failed to parse gpg userid hint." msgstr "Neuspjela obrada gpg userid podsjetnika." #: ../camel/camel-gpg-context.c:859 ../camel/camel-gpg-context.c:874 #, c-format msgid "Failed to parse gpg passphrase request." msgstr "Neuspjela obrada zahtjeva za gpg lozinkom." #: ../camel/camel-gpg-context.c:895 #, c-format msgid "" "You need a PIN to unlock the key for your\n" "SmartCard: \"%s\"" msgstr "" "Za otključavanje ključa potreban vam je PIN\n" "SmartCard: \"%s\"" #: ../camel/camel-gpg-context.c:899 #, c-format msgid "" "You need a passphrase to unlock the key for\n" "user: \"%s\"" msgstr "" "Potrebna vam je lozinka za otključavanje ključa\n" "korisnika: \"%s\"" #: ../camel/camel-gpg-context.c:905 #, c-format msgid "Unexpected request from GnuPG for '%s'" msgstr "Neočekivani zahtjev od GnuPG-a za '%s'" #: ../camel/camel-gpg-context.c:917 msgid "" "Note the encrypted content doesn't contain information about a recipient, " "thus there will be a password prompt for each of stored private key." msgstr "" #: ../camel/camel-gpg-context.c:948 ../camel/camel-net-utils.c:524 #: ../camel/providers/nntp/camel-nntp-summary.c:401 #: ../libedataserver/e-client.c:163 #, c-format msgid "Cancelled" msgstr "Otkazano" #: ../camel/camel-gpg-context.c:969 #, c-format msgid "Failed to unlock secret key: 3 bad passphrases given." msgstr "Neuspjelo otključavanje tajnog ključa: date su 3 pogrešne lozinke." #: ../camel/camel-gpg-context.c:982 #, c-format msgid "Unexpected response from GnuPG: %s" msgstr "Neočekivan odgovor od GnuPG: %s" #: ../camel/camel-gpg-context.c:1120 #, c-format msgid "Failed to encrypt: No valid recipients specified." msgstr "Neuspjelo šifriranje: nisu označeni ispravni primatelji." #: ../camel/camel-gpg-context.c:1675 ../camel/camel-smime-context.c:843 msgid "Could not generate signing data: " msgstr "Neuspjelo stvaranje podataka potpisivanja: " #: ../camel/camel-gpg-context.c:1725 ../camel/camel-gpg-context.c:1937 #: ../camel/camel-gpg-context.c:2047 ../camel/camel-gpg-context.c:2198 msgid "Failed to execute gpg." msgstr "Neuspjelo izvršavanje gpg-a." #: ../camel/camel-gpg-context.c:1808 ../camel/camel-gpg-context.c:1816 #: ../camel/camel-gpg-context.c:1824 ../camel/camel-gpg-context.c:1844 #: ../camel/camel-smime-context.c:972 ../camel/camel-smime-context.c:986 #: ../camel/camel-smime-context.c:995 #, c-format msgid "Cannot verify message signature: Incorrect message format" msgstr "Nemoguće provjeriti potpis poruke: Neispravan oblik poruke" #: ../camel/camel-gpg-context.c:1890 msgid "Cannot verify message signature: " msgstr "Nemoguće potvrditi potpis poruke: " #: ../camel/camel-gpg-context.c:2013 msgid "Could not generate encrypting data: " msgstr "Neuspjelo stvaranje podataka šifriranja: " #: ../camel/camel-gpg-context.c:2066 msgid "This is a digitally encrypted message part" msgstr "Ovo je digitalno šifrirani dio poruke" #: ../camel/camel-gpg-context.c:2122 ../camel/camel-gpg-context.c:2131 #: ../camel/camel-gpg-context.c:2154 #, c-format msgid "Cannot decrypt message: Incorrect message format" msgstr "Nemoguće dešifrirati poruku: neispravan oblik poruke" #: ../camel/camel-gpg-context.c:2142 #, c-format msgid "Failed to decrypt MIME part: protocol error" msgstr "Neuspjelo dešifriranje MIME dijela: greška u protokolu" #: ../camel/camel-gpg-context.c:2208 #, c-format msgid "Failed to decrypt MIME part: Secret key not found" msgstr "" #: ../camel/camel-gpg-context.c:2244 ../camel/camel-smime-context.c:1288 msgid "Encrypted content" msgstr "Šifrirani sadržaj" #: ../camel/camel-junk-filter.c:167 msgid "Synchronizing junk database" msgstr "" #: ../camel/camel-lock.c:110 #, c-format msgid "Could not create lock file for %s: %s" msgstr "Nemoguće zaključati datoteku za %s: %s" #: ../camel/camel-lock.c:153 #, c-format msgid "Timed out trying to get lock file on %s. Try again later." msgstr "" "Isteklo je vrijeme za zaključavanje datoteke %s. Pokušajte ponovo kasnije." #: ../camel/camel-lock.c:215 #, c-format msgid "Failed to get lock using fcntl(2): %s" msgstr "Neuspjelo zaključavanje koristeći fcntl(2): %s" #: ../camel/camel-lock.c:282 #, c-format msgid "Failed to get lock using flock(2): %s" msgstr "Neuspjelo zaključavanje koristeći flock(2): %s" #: ../camel/camel-lock-client.c:107 #, c-format msgid "Cannot build locking helper pipe: %s" msgstr "" "Nemoguće stvoriti pomoćni cjevovod za zaključavanje (baze podataka): %s" #: ../camel/camel-lock-client.c:131 #, c-format msgid "Cannot fork locking helper: %s" msgstr "Nemoguće račvati pomoćnika zaključavanja: %s" #: ../camel/camel-lock-client.c:218 ../camel/camel-lock-client.c:246 #, c-format msgid "Could not lock '%s': protocol error with lock-helper" msgstr "" "Nemoguće zaključati '%s': greška u protokolu s pomoćnikom zaključavanja" #: ../camel/camel-lock-client.c:234 #, c-format msgid "Could not lock '%s'" msgstr "Nemoguće zaključati '%s" #: ../camel/camel-movemail.c:101 #, c-format msgid "Could not open mail file %s: %s" msgstr "Nemoguće otvoriti datoteku pošte %s: %s" #: ../camel/camel-movemail.c:121 #, c-format msgid "Could not check mail file %s: %s" msgstr "Nemoguće provjeriti datoteku pošte %s: %s" #: ../camel/camel-movemail.c:136 #, c-format msgid "Could not open temporary mail file %s: %s" msgstr "Nemoguće otvoriti privremenu datoteku pošte %s: %s" #: ../camel/camel-movemail.c:166 #, c-format msgid "Failed to store mail in temp file %s: %s" msgstr "Neuspjelo smještanje pošte u temp datoteku %s: %s" #: ../camel/camel-movemail.c:200 #, c-format msgid "Could not create pipe: %s" msgstr "Nemoguće stvaranje cjevovoda: %s" #: ../camel/camel-movemail.c:214 #, c-format msgid "Could not fork: %s" msgstr "Nemoguće račvanje: %s" #: ../camel/camel-movemail.c:252 #, c-format msgid "Movemail program failed: %s" msgstr "Program za premještanje pošte nije uspio: %s" #: ../camel/camel-movemail.c:253 msgid "(Unknown error)" msgstr "(Nepoznata greška)" #: ../camel/camel-movemail.c:280 #, c-format msgid "Error reading mail file: %s" msgstr "Greška kod čitanja datoteke pošte: %s" #: ../camel/camel-movemail.c:293 #, c-format msgid "Error writing mail temp file: %s" msgstr "Greška kod pisanja privremene datoteke: %s" #: ../camel/camel-movemail.c:500 ../camel/camel-movemail.c:569 #, c-format msgid "Error copying mail temp file: %s" msgstr "Greška kod kopiranja privremene datoteke pošte: %s" #: ../camel/camel-multipart-signed.c:279 ../camel/camel-multipart-signed.c:432 #, c-format msgid "No content available" msgstr "Nema dostupnog sadržaja" #: ../camel/camel-multipart-signed.c:287 ../camel/camel-multipart-signed.c:440 #, c-format msgid "No signature available" msgstr "Potpis nije dostupan" #: ../camel/camel-multipart-signed.c:806 #, c-format msgid "parse error" msgstr "greška pri obradi" #: ../camel/camel-net-utils.c:706 #, c-format msgid "Resolving: %s" msgstr "Razlučivanje: %s" #: ../camel/camel-net-utils.c:731 msgid "Host lookup failed" msgstr "Računalo nije pronađeno" #: ../camel/camel-net-utils.c:737 #, c-format msgid "Host lookup '%s' failed. Check your host name for spelling errors." msgstr "" #: ../camel/camel-net-utils.c:741 #, c-format msgid "Host lookup '%s' failed: %s" msgstr "" #: ../camel/camel-offline-folder.c:93 #, c-format msgid "Downloading new messages for offline mode in '%s'" msgstr "" #: ../camel/camel-offline-folder.c:160 #, c-format msgid "Storing changes in folder '%s'" msgstr "" #: ../camel/camel-offline-folder.c:259 #, c-format msgid "Checking download of new messages for offline in '%s'" msgstr "" #: ../camel/camel-offline-folder.c:372 #, c-format msgid "Syncing messages in folder '%s' to disk" msgstr "Usklađivanje poruka u mapi ’%s‘ sa diskom" #: ../camel/camel-offline-folder.c:435 msgid "Copy folder content locally for _offline operation" msgstr "" #: ../camel/camel-provider.c:55 msgid "Virtual folder email provider" msgstr "Ponuđač e-pošte s virtualnim direktorijom" #: ../camel/camel-provider.c:57 msgid "For reading mail as a query of another set of folders" msgstr "Za čitanje pošte kao upita drugog niza mapa" #: ../camel/camel-provider.c:260 #, c-format msgid "Could not load %s: Module loading not supported on this system." msgstr "Nemoguće učitati %s: ovaj sustav ne podržava učitavanje modula." #: ../camel/camel-provider.c:269 #, c-format msgid "Could not load %s: %s" msgstr "Nemoguće učitati %s: %s" #: ../camel/camel-provider.c:278 #, c-format msgid "Could not load %s: No initialization code in module." msgstr "Nemoguće učitati %s: nema koda za pokretanje u modulu." #: ../camel/camel-provider.c:424 ../camel/camel-session.c:421 #, c-format msgid "No provider available for protocol '%s'" msgstr "Nema davatelja usluge za protokol '%s'" #: ../camel/camel-sasl-anonymous.c:32 #: ../camel/providers/nntp/camel-nntp-provider.c:82 msgid "Anonymous" msgstr "Anoniman" #: ../camel/camel-sasl-anonymous.c:34 msgid "This option will connect to the server using an anonymous login." msgstr "Spajanje na poslužitelj korištenjem anonimne prijave." #: ../camel/camel-sasl-anonymous.c:67 #, c-format msgid "Authentication failed." msgstr "Neuspjela ovjera." #: ../camel/camel-sasl-anonymous.c:78 #, c-format msgid "" "Invalid email address trace information:\n" "%s" msgstr "" "Neispravna informacija o porijeklu elektronske adrese:\n" "%s" #: ../camel/camel-sasl-anonymous.c:92 #, c-format msgid "" "Invalid opaque trace information:\n" "%s" msgstr "" "Neispravna informacija o neprozirnom tragu:\n" "%s" #: ../camel/camel-sasl-anonymous.c:106 #, c-format msgid "" "Invalid trace information:\n" "%s" msgstr "" "Neispravne informacija o porijeklu:\n" "%s" #: ../camel/camel-sasl-cram-md5.c:43 msgid "CRAM-MD5" msgstr "CRAM-MD5" #: ../camel/camel-sasl-cram-md5.c:45 msgid "" "This option will connect to the server using a secure CRAM-MD5 password, if " "the server supports it." msgstr "" "Spajanje na poslužitelj korištenjem lozinke kodirane CRAM-MD5 algoritmom, " "ako ga poslužitelj podržava." #: ../camel/camel-sasl-digest-md5.c:56 msgid "DIGEST-MD5" msgstr "DIGEST-MD5" #: ../camel/camel-sasl-digest-md5.c:58 msgid "" "This option will connect to the server using a secure DIGEST-MD5 password, " "if the server supports it." msgstr "" "Spajanje na poslužitelj korištenjem lozinke kodirane DIGEST-MD5 algoritmom, " "ako ga poslužitelj podržava." #: ../camel/camel-sasl-digest-md5.c:854 #, c-format msgid "Server challenge too long (>2048 octets)" msgstr "Upit na poslužitelj predug (>2048 octets)" #: ../camel/camel-sasl-digest-md5.c:865 #, c-format msgid "Server challenge invalid\n" msgstr "Upit na poslužitelj je neispravan\n" #: ../camel/camel-sasl-digest-md5.c:873 #, c-format msgid "Server challenge contained invalid \"Quality of Protection\" token" msgstr "Upit na poslužitelj ima neispravni „Kvaliteta zaštite“ signal" #: ../camel/camel-sasl-digest-md5.c:906 #, c-format msgid "Server response did not contain authorization data" msgstr "Odgovor poslužitelja nije imao podatke o ovlašćenju" #: ../camel/camel-sasl-digest-md5.c:927 #, c-format msgid "Server response contained incomplete authorization data" msgstr "Odgovor poslužitelja nije imao kompletne podatke o ovlašćenju" #: ../camel/camel-sasl-digest-md5.c:940 #, c-format msgid "Server response does not match" msgstr "Odgovor poslužitelja ne odgovara" #: ../camel/camel-sasl-gssapi.c:94 msgid "GSSAPI" msgstr "GSSAPI" #: ../camel/camel-sasl-gssapi.c:96 msgid "" "This option will connect to the server using Kerberos 5 authentication." msgstr "Spajanje na poslužitelj korištenjem Kerberos 4 ovjere." #: ../camel/camel-sasl-gssapi.c:148 #, c-format msgid "(Unknown GSSAPI mechanism code: %x)" msgstr "" #: ../camel/camel-sasl-gssapi.c:181 msgid "" "The specified mechanism is not supported by the provided credential, or is " "unrecognized by the implementation." msgstr "" "Dano uvjerenje ne podržava odabrani mehanizam ili ga primjenjena metoda ne " "prepoznaje." #: ../camel/camel-sasl-gssapi.c:186 msgid "The provided target_name parameter was ill-formed." msgstr "Ponuđeni parametar target_name nije pravilno oblikovan." #: ../camel/camel-sasl-gssapi.c:189 msgid "" "The provided target_name parameter contained an invalid or unsupported type " "of name." msgstr "" "Ponuđeni parametar target_name je sadržavao neispravnu ili nepodržanu vrstu " "imena." #: ../camel/camel-sasl-gssapi.c:193 msgid "" "The input_token contains different channel bindings to those specified via " "the input_chan_bindings parameter." msgstr "" "input_token sadrži različita vezivanja za kanale od onih određenih preko " "parametra input_chan_bindings." #: ../camel/camel-sasl-gssapi.c:198 msgid "" "The input_token contains an invalid signature, or a signature that could not " "be verified." msgstr "" "input_token sadrži neispravan potpis, ili potpis nije mogao biti provjeren." #: ../camel/camel-sasl-gssapi.c:202 msgid "" "The supplied credentials were not valid for context initiation, or the " "credential handle did not reference any credentials." msgstr "" "Pružena uvjerenja nisu bila ispravna za započimanje procesa, ili je nosač " "uvjerenja došao bez njih." #: ../camel/camel-sasl-gssapi.c:207 msgid "The supplied context handle did not refer to a valid context." msgstr "Pruženi nosač sadržaja nije upućivao na ispravan sadržaj." #: ../camel/camel-sasl-gssapi.c:210 msgid "The consistency checks performed on the input_token failed." msgstr "Neuspjele provjere dosljednosti na input_token." #: ../camel/camel-sasl-gssapi.c:213 msgid "The consistency checks performed on the credential failed." msgstr "Neuspjele provjere dosljednosti na uvjerenjima." #: ../camel/camel-sasl-gssapi.c:216 msgid "The referenced credentials have expired." msgstr "Uvjerenja na koja se upućuje su istekla." #: ../camel/camel-sasl-gssapi.c:222 ../camel/camel-sasl-gssapi.c:404 #: ../camel/camel-sasl-gssapi.c:453 ../camel/camel-sasl-gssapi.c:470 #: ../camel/providers/smtp/camel-smtp-transport.c:790 #, c-format msgid "Bad authentication response from server." msgstr "Neispravan odgovor ovjere od poslužitelja." #: ../camel/camel-sasl-gssapi.c:482 #, c-format msgid "Unsupported security layer." msgstr "Nepodržan sigurnosni sloj." #: ../camel/camel-sasl-login.c:37 msgid "Login" msgstr "Prijava" #: ../camel/camel-sasl-login.c:39 ../camel/camel-sasl-plain.c:43 msgid "This option will connect to the server using a simple password." msgstr "Spajanje na poslužitelj korištenjem obične lozinke." #: ../camel/camel-sasl-login.c:107 #, c-format msgid "Unknown authentication state." msgstr "Nepoznato stanje ovjere." #: ../camel/camel-sasl-ntlm.c:46 msgid "NTLM / SPA" msgstr "NTLM / SPA" #: ../camel/camel-sasl-ntlm.c:48 msgid "" "This option will connect to a Windows-based server using NTLM / Secure " "Password Authentication." msgstr "" "Spajanje na Windows poslužitelj korištenjem NTLM / Secure Password " "Authentication." #: ../camel/camel-sasl-plain.c:41 msgid "PLAIN" msgstr "JASAN" #: ../camel/camel-sasl-popb4smtp.c:43 msgid "POP before SMTP" msgstr "POP prije SMTP identifikacija..." #: ../camel/camel-sasl-popb4smtp.c:45 msgid "This option will authorise a POP connection before attempting SMTP" msgstr "Prvo se prijavi na POP, a zatim pokušaj SMTP" #: ../camel/camel-sasl-popb4smtp.c:81 msgid "POP Source UID" msgstr "UID POP izvora" #: ../camel/camel-sasl-popb4smtp.c:95 #, c-format msgid "POP Before SMTP authentication using an unknown transport" msgstr "POP prije SMTP-a ovjera koristeći nepoznati prijenos" #: ../camel/camel-sasl-popb4smtp.c:107 ../camel/camel-sasl-popb4smtp.c:116 #, c-format msgid "POP Before SMTP authentication attempted with a %s service" msgstr "POP prije SMTP autentifikacija isprobana sa servisom %s" #: ../camel/camel-search-private.c:113 #, c-format msgid "Regular expression compilation failed: %s: %s" msgstr "Neuspjelo sastavljanje regularnog izraza: %s: %s" #: ../camel/camel-session.c:430 #, c-format msgid "Invalid GType registered for protocol '%s'" msgstr "Neispravan GType registriran za protokol '%s'" #: ../camel/camel-session.c:499 #: ../camel/providers/imapx/camel-imapx-server.c:2924 #: ../camel/providers/pop3/camel-pop3-store.c:308 #: ../camel/providers/pop3/camel-pop3-store.c:786 #: ../camel/providers/smtp/camel-smtp-transport.c:664 #, c-format msgid "No support for %s authentication" msgstr "" #: ../camel/camel-session.c:514 #, c-format msgid "%s authentication failed" msgstr "" #: ../camel/camel-session.c:583 msgid "Forwarding messages is not supported" msgstr "" #: ../camel/camel-smime-context.c:348 ../camel/camel-smime-context.c:1075 #, c-format msgid "Cannot find certificate for '%s'" msgstr "Nemoguće naći potvrdu za '%s'" #: ../camel/camel-smime-context.c:376 msgid "Cannot create CMS message" msgstr "Nemoguće stvoriti CMS poruku" #: ../camel/camel-smime-context.c:381 msgid "Cannot create CMS signed data" msgstr "Nemoguće stvoriti CMS potpisane podatke" #: ../camel/camel-smime-context.c:387 msgid "Cannot attach CMS signed data" msgstr "Nemoguće priložiti CMS potpisane podatke" #: ../camel/camel-smime-context.c:394 msgid "Cannot attach CMS data" msgstr "Nemoguće priložiti CMS podatke" #: ../camel/camel-smime-context.c:400 msgid "Cannot create CMS Signer information" msgstr "Nemoguće stvoriti CMS Potpisnik informaciju" #: ../camel/camel-smime-context.c:406 msgid "Cannot find certificate chain" msgstr "Nemoguće naći lanac potvrda" #: ../camel/camel-smime-context.c:412 msgid "Cannot add CMS Signing time" msgstr "Nemoguće dodati CMS vrijeme potpisa" #: ../camel/camel-smime-context.c:436 ../camel/camel-smime-context.c:451 #, c-format msgid "Encryption certificate for '%s' does not exist" msgstr "Potvrda šifriranja ’%s‘ ne postoji" #: ../camel/camel-smime-context.c:458 msgid "Cannot add SMIMEEncKeyPrefs attribute" msgstr "Nemoguće dodati SMIMEEncKeyPrefs atribut" #: ../camel/camel-smime-context.c:463 msgid "Cannot add MS SMIMEEncKeyPrefs attribute" msgstr "Nemoguće dodati MS SMIMEEncKeyPrefs atribut" #: ../camel/camel-smime-context.c:468 msgid "Cannot add encryption certificate" msgstr "Nemoguće dodati potvrdu šifriranja" #: ../camel/camel-smime-context.c:474 msgid "Cannot add CMS Signer information" msgstr "Nemoguće dodati CMS Potpisnik informaciju" #. Translators: A fallback message when couldn't verify an SMIME signature #: ../camel/camel-smime-context.c:507 msgid "Unverified" msgstr "Neprovjereno" #: ../camel/camel-smime-context.c:509 msgid "Good signature" msgstr "Dobar potpis" #: ../camel/camel-smime-context.c:511 msgid "Bad signature" msgstr "Loš potpis" #: ../camel/camel-smime-context.c:513 msgid "Content tampered with or altered in transit" msgstr "Sadržaj je mijenjan prilikom prijenosa" #: ../camel/camel-smime-context.c:515 msgid "Signing certificate not found" msgstr "Potpisna potvrda nije pronađena" #: ../camel/camel-smime-context.c:517 msgid "Signing certificate not trusted" msgstr "Potpisna potvrda nije povjerljiva" #: ../camel/camel-smime-context.c:519 msgid "Signature algorithm unknown" msgstr "Algoritam za potpis nepoznat" #: ../camel/camel-smime-context.c:521 msgid "Signature algorithm unsupported" msgstr "Algoritam potpisa nepodržan" #: ../camel/camel-smime-context.c:523 msgid "Malformed signature" msgstr "Neispravni potpis" #: ../camel/camel-smime-context.c:525 msgid "Processing error" msgstr "Greška u obradi" #: ../camel/camel-smime-context.c:570 msgid "No signed data in signature" msgstr "Nema potpisanih podataka u potpisu" #: ../camel/camel-smime-context.c:575 msgid "Digests missing from enveloped data" msgstr "Obuhvaćeni podatak ne sadrži sažetak poruke" #: ../camel/camel-smime-context.c:588 ../camel/camel-smime-context.c:599 msgid "Cannot calculate digests" msgstr "Nemoguće izračunati sažetak" #: ../camel/camel-smime-context.c:606 ../camel/camel-smime-context.c:610 msgid "Cannot set message digests" msgstr "Nemoguće postaviti sažetak poruke" #: ../camel/camel-smime-context.c:620 ../camel/camel-smime-context.c:625 msgid "Certificate import failed" msgstr "Neuspio uvoz potvrde" #: ../camel/camel-smime-context.c:635 #, c-format msgid "Certificate is the only message, cannot verify certificates" msgstr "Potvrda je jedina poruka, nije moguća provjera potvrda" #: ../camel/camel-smime-context.c:638 #, c-format msgid "Certificate is the only message, certificates imported and verified" msgstr "Potvrda je jedina poruka, potvrde uvežene i provjerene" #: ../camel/camel-smime-context.c:642 msgid "Cannot find signature digests" msgstr "Nemoguće naći potpis sažetka" #: ../camel/camel-smime-context.c:659 #, c-format msgid "Signer: %s <%s>: %s\n" msgstr "Potpisnik: %s <%s>: %s\n" #: ../camel/camel-smime-context.c:855 ../camel/camel-smime-context.c:1149 msgid "Cannot create encoder context" msgstr "Nemoguće izraditi kontekst kodera" #: ../camel/camel-smime-context.c:861 msgid "Failed to add data to CMS encoder" msgstr "Neuspješno dodavanje podataka u CMS koder" #: ../camel/camel-smime-context.c:866 ../camel/camel-smime-context.c:1166 msgid "Failed to encode data" msgstr "Neuspješno šifriranje podataka" #: ../camel/camel-smime-context.c:1014 ../camel/camel-smime-context.c:1263 msgid "Decoder failed" msgstr "Pogreška dekodera" #: ../camel/camel-smime-context.c:1083 msgid "Cannot find common bulk encryption algorithm" msgstr "Nemoguće naći zajednički algoritam za masovno šifriranje" #: ../camel/camel-smime-context.c:1091 msgid "Cannot allocate slot for encryption bulk key" msgstr "Nemoguće dodijeliti prostor za masovni ključ šifriranja" #: ../camel/camel-smime-context.c:1102 msgid "Cannot create CMS Message" msgstr "Nemoguće stvoriti CMS poruku" #: ../camel/camel-smime-context.c:1108 msgid "Cannot create CMS Enveloped data" msgstr "Nemoguće stvoriti CMS kuvertirani podatak" #: ../camel/camel-smime-context.c:1114 msgid "Cannot attach CMS Enveloped data" msgstr "Nemoguće priložiti CMS kuvertirani podatak" #: ../camel/camel-smime-context.c:1120 msgid "Cannot attach CMS data object" msgstr "Nemoguće priložiti CMS podatkovni objekt" #: ../camel/camel-smime-context.c:1129 msgid "Cannot create CMS Recipient information" msgstr "Nemoguće stvoriti CMS informaciju o primatelju" #: ../camel/camel-smime-context.c:1134 msgid "Cannot add CMS Recipient information" msgstr "Nemoguće dodati CMS informaciju o primatelju" #: ../camel/camel-smime-context.c:1160 msgid "Failed to add data to encoder" msgstr "Neuspješno dodavanje podataka u koder" #: ../camel/camel-smime-context.c:1270 msgid "S/MIME Decrypt: No encrypted content found" msgstr "S/MIME dešifriranje: nisu nađeni šifrirani podaci" #: ../camel/camel-store.c:1248 #, c-format msgid "Opening folder '%s'" msgstr "Otvaranje direktorija '%s'" #: ../camel/camel-store.c:1539 #, c-format msgid "Scanning folders in '%s'" msgstr "Skeniranje direktorija u '%s'" #: ../camel/camel-store.c:1567 ../camel/camel-store.c:1612 #: ../camel/camel-vtrash-folder.c:45 msgid "Trash" msgstr "Smeće" #: ../camel/camel-store.c:1581 ../camel/camel-store.c:1629 #: ../camel/camel-vtrash-folder.c:47 msgid "Junk" msgstr "Nepoželjna" #: ../camel/camel-store.c:2230 #, c-format msgid "Cannot create folder: %s: folder exists" msgstr "Nemoguće stvoriti mapu: %s: mapa postoji" #: ../camel/camel-store.c:2237 #, c-format msgid "Creating folder '%s'" msgstr "Stvaranje direktorija '%s'" #: ../camel/camel-store.c:2414 ../camel/camel-vee-store.c:410 #: ../camel/providers/local/camel-maildir-store.c:346 #, c-format msgid "Cannot delete folder: %s: Invalid operation" msgstr "Nemoguće obrisati mapu: %s: neispravna operacija" #: ../camel/camel-store.c:2604 ../camel/camel-vee-store.c:461 #: ../camel/providers/local/camel-maildir-store.c:914 #, c-format msgid "Cannot rename folder: %s: Invalid operation" msgstr "Nemoguće preimenovati mapu: %s: neispravna operacija" #: ../camel/camel-stream.c:168 msgid "Cannot write with no base stream" msgstr "" #: ../camel/camel-stream.c:288 ../camel/camel-stream.c:339 #, c-format msgid "Stream type '%s' is not seekable" msgstr "" #: ../camel/camel-stream-filter.c:344 msgid "Only reset to beginning is supported with CamelStreamFilter" msgstr "S CamelStreamFilter je podržano samo resetiranje na početak" #: ../camel/camel-stream-null.c:74 msgid "Only reset to beginning is supported with CamelHttpStream" msgstr "S CamelHttpStream je podržano samo resetiranje na početak" #: ../camel/camel-stream-process.c:278 #: ../camel/providers/smtp/camel-smtp-transport.c:711 #, c-format msgid "Connection cancelled" msgstr "Veza otkazana" #: ../camel/camel-stream-process.c:283 #, c-format msgid "Could not connect with command \"%s\": %s" msgstr "Nemoguće spajanje s naredbom \"%s\": %s" #: ../camel/camel-subscribable.c:273 #, c-format msgid "Subscribing to folder '%s'" msgstr "" #: ../camel/camel-subscribable.c:442 #, c-format msgid "Unsubscribing from folder '%s'" msgstr "" #: ../camel/camel-url.c:327 #, c-format msgid "Could not parse URL '%s'" msgstr "Nemoguće raščlaniti URL '%s'" #: ../camel/camel-vee-folder.c:491 #, c-format msgid "Updating folder '%s'" msgstr "" #: ../camel/camel-vee-folder.c:869 ../camel/camel-vee-folder.c:979 #, c-format msgid "Cannot copy or move messages into a Virtual Folder" msgstr "Nemoguće kopirati ili premjestiti poruke u virtualnu mapu" #: ../camel/camel-vee-folder.c:902 #, c-format msgid "No such message %s in %s" msgstr "Nema takve poruke %s u %s" #: ../camel/camel-vee-folder.c:955 #, c-format msgid "Error storing '%s': " msgstr "Greška pri pohrani '%s': " #: ../camel/camel-vee-folder.c:1191 msgid "Automatically _update on change in source folders" msgstr "" #. Translators: 'Unmatched' is a folder name under Search folders where are shown #. * all messages not belonging into any other configured search folder #: ../camel/camel-vee-store.c:40 msgid "Unmatched" msgstr "Neupariv" #: ../camel/camel-vee-store.c:436 #, c-format msgid "Cannot delete folder: %s: No such folder" msgstr "Nemoguće obrisati mapu: %s: nema takve mape" #: ../camel/camel-vee-store.c:471 #, c-format msgid "Cannot rename folder: %s: No such folder" msgstr "Nemoguće preimenovati mapu: %s: nema takve mape" #: ../camel/camel-vee-store.c:533 msgid "Enable _Unmatched folder" msgstr "" #: ../camel/camel-vee-store.c:1025 msgid "Updating Unmatched search folder" msgstr "" #: ../camel/camel-vtrash-folder.c:46 msgid "Cannot copy messages to the Trash folder" msgstr "Nemoguće kopirati poruke u mapu \"Smeće\"" #: ../camel/camel-vtrash-folder.c:48 msgid "Cannot copy messages to the Junk folder" msgstr "Nemoguće kopirati poruke u mapu \"Neželjeno\"" #: ../camel/providers/imapx/camel-imapx-conn-manager.c:953 #, c-format msgid "You must be working online to complete this operation (%s)" msgstr "" #: ../camel/providers/imapx/camel-imapx-conn-manager.c:961 #: ../camel/providers/nntp/camel-nntp-store.c:1284 #: ../camel/providers/pop3/camel-pop3-folder.c:449 #: ../camel/providers/pop3/camel-pop3-folder.c:632 #: ../camel/providers/pop3/camel-pop3-folder.c:834 #: ../camel/providers/pop3/camel-pop3-folder.c:1044 #: ../camel/providers/pop3/camel-pop3-store.c:296 #: ../camel/providers/pop3/camel-pop3-store.c:529 #: ../camel/providers/pop3/camel-pop3-store.c:577 #: ../camel/providers/pop3/camel-pop3-store.c:672 #: ../camel/providers/pop3/camel-pop3-store.c:1103 #, c-format msgid "You must be working online to complete this operation" msgstr "Morate biti na mreži da biste završili ovu operaciju" #: ../camel/providers/imapx/camel-imapx-conn-manager.c:1533 #: ../camel/providers/imapx/camel-imapx-conn-manager.c:1621 #, c-format msgid "No destination folder specified" msgstr "" #: ../camel/providers/imapx/camel-imapx-conn-manager.c:1560 msgid "Unable to move junk messages" msgstr "" #: ../camel/providers/imapx/camel-imapx-conn-manager.c:1655 msgid "Unable to move deleted messages" msgstr "" #: ../camel/providers/imapx/camel-imapx-folder.c:702 #, c-format msgid "No quota information available for folder '%s'" msgstr "" #: ../camel/providers/imapx/camel-imapx-folder.c:964 #: ../camel/providers/nntp/camel-nntp-folder.c:765 msgid "Apply message _filters to this folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-folder.c:975 msgid "Always check for _new mail in this folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-folder.c:1088 #, c-format msgid "Could not create folder summary for %s" msgstr "Nemoguće stvoriti sažetak mape za %s" #: ../camel/providers/imapx/camel-imapx-folder.c:1097 #, c-format msgid "Could not create cache for %s: " msgstr "Nemoguće stvoriti predmemoriju za %s " #: ../camel/providers/imapx/camel-imapx-folder.c:1295 #, c-format msgid "No IMAP mailbox available for folder '%s'" msgstr "" #: ../camel/providers/imapx/camel-imapx-input-stream.c:101 #, c-format msgid "Source stream returned no data" msgstr "Izvorni tok nije vratio nikakve podatke" #: ../camel/providers/imapx/camel-imapx-provider.c:38 msgid "Checking for New Mail" msgstr "Provjeravanje ima li nove pošte" #: ../camel/providers/imapx/camel-imapx-provider.c:40 msgid "C_heck for new messages in all folders" msgstr "P_rovjeri za nove poruke u svim mapama" #: ../camel/providers/imapx/camel-imapx-provider.c:42 msgid "Ch_eck for new messages in subscribed folders" msgstr "Pr_ovjeri ima li novih poruka u pretplaćenim mapama" #: ../camel/providers/imapx/camel-imapx-provider.c:44 msgid "Use _Quick Resync if the server supports it" msgstr "Koristi \"_Brzo ponovno usklađenje\" ako ga podržava poslužitelj" #: ../camel/providers/imapx/camel-imapx-provider.c:46 msgid "_Listen for server change notifications" msgstr "" #: ../camel/providers/imapx/camel-imapx-provider.c:49 msgid "Connection to Server" msgstr "Veza na poslužitelj" #: ../camel/providers/imapx/camel-imapx-provider.c:51 msgid "Numbe_r of concurrent connections to use" msgstr "" #: ../camel/providers/imapx/camel-imapx-provider.c:54 #: ../camel/providers/nntp/camel-nntp-provider.c:43 msgid "Folders" msgstr "Mape" #: ../camel/providers/imapx/camel-imapx-provider.c:56 msgid "_Show only subscribed folders" msgstr "_Pokaži samo pretplaćene mape" #: ../camel/providers/imapx/camel-imapx-provider.c:59 msgid "O_verride server-supplied folder namespace" msgstr "Z_aobiđi prostor naziva mapa koje daje poslužitelj" #: ../camel/providers/imapx/camel-imapx-provider.c:61 msgid "Namespace:" msgstr "Prostor naziva:" #: ../camel/providers/imapx/camel-imapx-provider.c:64 #: ../camel/providers/local/camel-local-provider.c:39 #: ../camel/providers/local/camel-local-provider.c:77 #: ../camel/providers/local/camel-local-provider.c:99 #: ../camel/providers/nntp/camel-nntp-provider.c:38 msgid "Options" msgstr "Mogućnosti" #: ../camel/providers/imapx/camel-imapx-provider.c:66 #: ../camel/providers/nntp/camel-nntp-provider.c:40 msgid "Apply _filters to new messages in all folders" msgstr "" #: ../camel/providers/imapx/camel-imapx-provider.c:68 msgid "_Apply filters to new messages in Inbox on this server" msgstr "" "_Primjeni filtere na nove poruke u mapi dolazne pošte na ovom poslužitelju" #: ../camel/providers/imapx/camel-imapx-provider.c:70 msgid "Check new messages for _Junk contents" msgstr "Provjeri nove poruke za neželjenim sadržajem" #: ../camel/providers/imapx/camel-imapx-provider.c:72 msgid "Only check for Junk messages in the In_box folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-provider.c:74 msgid "Synchroni_ze remote mail locally in all folders" msgstr "" #: ../camel/providers/imapx/camel-imapx-provider.c:80 msgid "Default IMAP port" msgstr "Zadani IMAP port" #: ../camel/providers/imapx/camel-imapx-provider.c:81 msgid "IMAP over SSL" msgstr "IMAP putem SSL-a" #: ../camel/providers/imapx/camel-imapx-provider.c:88 msgid "IMAP+" msgstr "IMAP+" #: ../camel/providers/imapx/camel-imapx-provider.c:90 msgid "For reading and storing mail on IMAP servers." msgstr "Za čitanje i spremanje pošte na IMAP poslužiteljima." #: ../camel/providers/imapx/camel-imapx-server.c:1134 msgid "Error writing to cache stream" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:2741 #: ../camel/providers/imapx/camel-imapx-server.c:2828 #: ../camel/providers/imapx/camel-imapx-server.c:3081 msgid "Failed to get capabilities" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:2760 #, c-format msgid "Failed to connect to IMAP server %s in secure mode: %s" msgstr "" "Nemoguće povezivanje na IMAP poslužitelj %s u sigurnosnom načinu rada: %s" #: ../camel/providers/imapx/camel-imapx-server.c:2761 #: ../camel/providers/smtp/camel-smtp-transport.c:281 msgid "STARTTLS not supported" msgstr "STARTTLS nije podržan" #: ../camel/providers/imapx/camel-imapx-server.c:2769 msgid "Failed to issue STARTTLS" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:2817 #, c-format msgid "Failed to connect to IMAP server %s in secure mode: " msgstr "" "Neuspjelo povezivanje na IMAP poslužitelj %s u sigurnom načinu rada: " #: ../camel/providers/imapx/camel-imapx-server.c:2911 #, c-format msgid "IMAP server %s does not support %s authentication" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:2942 #: ../camel/providers/nntp/camel-nntp-store.c:393 #: ../camel/providers/nntp/camel-nntp-store.c:535 msgid "Cannot authenticate without a username" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:2951 #: ../camel/providers/nntp/camel-nntp-store.c:544 #: ../camel/providers/pop3/camel-pop3-store.c:690 #: ../camel/providers/pop3/camel-pop3-store.c:728 msgid "Authentication password not available" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:2959 msgid "Failed to authenticate" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:3103 msgid "Failed to issue NAMESPACE" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:3121 msgid "Failed to enable QResync" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:3153 msgid "Failed to issue NOTIFY" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:3612 msgid "Failed to select mailbox" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:3710 msgid "Cannot issue command, no stream available" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:3972 #, c-format msgid "Cannot get message with message ID %s: %s" msgstr "Nemoguće dohvatiti poruku s ID-om %s: %s" #: ../camel/providers/imapx/camel-imapx-server.c:3973 msgid "No such message available." msgstr "Takva poruka nije dostupna." #: ../camel/providers/imapx/camel-imapx-server.c:4007 #: ../camel/providers/imapx/camel-imapx-server.c:4032 #: ../camel/providers/imapx/camel-imapx-server.c:4051 msgid "Error fetching message" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4044 msgid "Failed to close the tmp stream" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4075 msgid "Failed to copy the tmp file" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4238 msgid "Error moving messages" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4238 msgid "Error copying messages" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4422 #: ../camel/providers/imapx/camel-imapx-server.c:4443 msgid "Cannot create spool file: " msgstr "Nemoguće stvoriti spool datoteku: " #: ../camel/providers/imapx/camel-imapx-server.c:4534 msgid "Error appending message" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4624 msgid "Error performing NOOP" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4772 #, c-format msgid "Scanning for changed messages in '%s'" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4775 msgid "Error scanning changes" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4793 #, c-format msgid "Fetching summary information for new messages in '%s'" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4810 msgid "Error fetching message info" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:4872 msgid "Error running STATUS" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5355 #: ../camel/providers/imapx/camel-imapx-server.c:5407 msgid "Error syncing changes" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5518 msgid "Error expunging message" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5588 msgid "Error fetching folders" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5599 msgid "Error fetching subscribed folders" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5621 msgid "Error creating folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5677 msgid "Error deleting folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5723 msgid "Error renaming folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5755 msgid "Error subscribing to folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5791 msgid "Error unsubscribing from folder" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5831 msgid "IMAP server does not support quotas" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5843 msgid "Error retrieving quota information" msgstr "" #: ../camel/providers/imapx/camel-imapx-server.c:5890 msgid "Search failed" msgstr "" #. Blocks, until the DONE is issued or on inactivity timeout, error, ... #: ../camel/providers/imapx/camel-imapx-server.c:6008 msgid "Error running IDLE" msgstr "" #. create a dummy "." parent inbox, use to scan, then put back at the top level #: ../camel/providers/imapx/camel-imapx-store.c:224 #: ../camel/providers/local/camel-maildir-folder.c:482 #: ../camel/providers/local/camel-maildir-store.c:347 #: ../camel/providers/local/camel-maildir-store.c:826 #: ../camel/providers/local/camel-maildir-store.c:832 #: ../camel/providers/local/camel-maildir-store.c:915 #: ../camel/providers/local/camel-spool-store.c:393 msgid "Inbox" msgstr "Ulazni sandučić" #: ../camel/providers/imapx/camel-imapx-store.c:765 #, c-format msgid "IMAP server %s" msgstr "IMAP poslužitelj %s" #: ../camel/providers/imapx/camel-imapx-store.c:768 #, c-format msgid "IMAP service for %s on %s" msgstr "IMAP usluge za %s na %s" #: ../camel/providers/imapx/camel-imapx-store.c:836 msgid "No IMAPx connection object provided" msgstr "" #: ../camel/providers/imapx/camel-imapx-store.c:853 #: ../camel/providers/nntp/camel-nntp-provider.c:92 #: ../camel/providers/pop3/camel-pop3-provider.c:80 msgid "Password" msgstr "Lozinka" #: ../camel/providers/imapx/camel-imapx-store.c:855 msgid "" "This option will connect to the IMAP server using a plaintext password." msgstr "Spajanje na IMAP poslužitelje korištenjem lozinke u običnom tekstu." #: ../camel/providers/imapx/camel-imapx-store.c:938 #, c-format msgid "No such folder %s" msgstr "Nema takve mape %s" #: ../camel/providers/imapx/camel-imapx-store.c:1353 #, c-format msgid "No IMAP namespace for folder path '%s'" msgstr "" #: ../camel/providers/imapx/camel-imapx-store.c:1614 #: ../camel/providers/imapx/camel-imapx-store.c:1847 #, c-format msgid "Retrieving folder list for '%s'" msgstr "" #: ../camel/providers/imapx/camel-imapx-store.c:2063 #, c-format msgid "" "The folder name \"%s\" is invalid because it contains the character \"%c\"" msgstr "Ime mape \"%s\" nije ispravno jer sadrži znak \"%c\"" #: ../camel/providers/local/camel-local-folder.c:194 #, c-format msgid "~%s (%s)" msgstr "~%s (%s)" #: ../camel/providers/local/camel-local-folder.c:204 #: ../camel/providers/local/camel-local-folder.c:213 #, c-format msgid "mailbox: %s (%s)" msgstr "poštanski sandučić: %s (%s)" #: ../camel/providers/local/camel-local-folder.c:222 #, c-format msgid "%s (%s)" msgstr "%s (%s)" #: ../camel/providers/local/camel-local-folder.c:499 msgid "_Index message body data" msgstr "" #: ../camel/providers/local/camel-local-folder.c:727 #, c-format msgid "" "Cannot get message %s from folder %s\n" "%s" msgstr "" "Nemoguće dobiti poruku %s iz mape %s\n" "%s" #: ../camel/providers/local/camel-local-provider.c:41 msgid "_Use the '.folders' folder summary file (exmh)" msgstr "_Koristi datoteku (exmh) sažetka mape '.folders'" #: ../camel/providers/local/camel-local-provider.c:48 msgid "MH-format mail directories" msgstr "Direktoriji pošte MH oblika" #: ../camel/providers/local/camel-local-provider.c:49 msgid "For storing local mail in MH-like mail directories." msgstr "Za spremanje lokalne pošte u direktorije nalik MH-u." #: ../camel/providers/local/camel-local-provider.c:66 msgid "Local delivery" msgstr "Lokalna dostava" #: ../camel/providers/local/camel-local-provider.c:67 msgid "" "For retrieving (moving) local mail from standard mbox-formatted spools into " "folders managed by Evolution." msgstr "" "Za preuzimanje (premještanje) lokalne pošte iz standardnog mbox oblika u " "oblik kojim upravlja Evolution." #: ../camel/providers/local/camel-local-provider.c:79 #: ../camel/providers/local/camel-local-provider.c:101 msgid "_Apply filters to new messages in Inbox" msgstr "" #: ../camel/providers/local/camel-local-provider.c:86 msgid "Maildir-format mail directories" msgstr "Direktoriji pošte u Maildir formatu" #: ../camel/providers/local/camel-local-provider.c:87 msgid "For storing local mail in maildir directories." msgstr "Za spremanje lokalne pošte u maildir direktorije." #: ../camel/providers/local/camel-local-provider.c:102 msgid "_Store status headers in Elm/Pine/Mutt format" msgstr "_Spremi zaglavlja stanja u Elm/Pine/Mutt obliku" #: ../camel/providers/local/camel-local-provider.c:109 msgid "Standard Unix mbox spool file" msgstr "Standardna Unix mbox spool datoteka" #: ../camel/providers/local/camel-local-provider.c:110 #: ../camel/providers/local/camel-local-provider.c:124 msgid "" "For reading and storing local mail in external standard mbox spool files.\n" "May also be used to read a tree of Elm, Pine, or Mutt style folders." msgstr "" "Za čitanje i smještanje lokalne pošte u vanjske standardne mbox spool " "datoteke.\n" "Također se može koristiti za čitanje stabla direktorija u Elm, Pine, ili " "Mutt stilu." #: ../camel/providers/local/camel-local-provider.c:123 msgid "Standard Unix mbox spool directory" msgstr "Standardni Unix mbox spool direktorij" #: ../camel/providers/local/camel-local-store.c:88 #, c-format msgid "Could not rename folder %s to %s: %s" msgstr "Nemoguće preimenovati mapu %s u %s: %s" #: ../camel/providers/local/camel-local-store.c:170 #, c-format msgid "Local mail file %s" msgstr "Lokalna datoteka pošte %s" #: ../camel/providers/local/camel-local-store.c:213 #: ../camel/providers/local/camel-local-store.c:373 #: ../camel/providers/local/camel-maildir-store.c:123 #: ../camel/providers/local/camel-mbox-store.c:572 #: ../camel/providers/local/camel-spool-store.c:87 #, c-format msgid "Store root %s is not an absolute path" msgstr "Spremnik root %s nije apsolutna putanja" #: ../camel/providers/local/camel-local-store.c:222 #, c-format msgid "Store root %s is not a regular directory" msgstr "Spremnik root %s nije regularan direktorij" #: ../camel/providers/local/camel-local-store.c:234 #: ../camel/providers/local/camel-local-store.c:244 #: ../camel/providers/local/camel-local-store.c:386 #: ../camel/providers/local/camel-maildir-store.c:165 #, c-format msgid "Cannot get folder: %s: %s" msgstr "Nemoguće dobiti mapu: %s: %s" #: ../camel/providers/local/camel-local-store.c:281 #, c-format msgid "Local stores do not have an inbox" msgstr "Lokalna spremišta ne sadrže ulazni poštanski sandučić." #: ../camel/providers/local/camel-local-store.c:446 #: ../camel/providers/local/camel-mbox-store.c:739 #, c-format msgid "Could not delete folder index file '%s': %s" msgstr "Nemoguće izbrisati indeks datoteku mape '%s': %s" #: ../camel/providers/local/camel-local-store.c:474 #: ../camel/providers/local/camel-mbox-store.c:769 #, c-format msgid "Could not delete folder meta file '%s': %s" msgstr "Nemoguće izbrisati meta datoteku mape '%s': %s" #: ../camel/providers/local/camel-local-store.c:587 #, c-format msgid "Could not rename '%s': %s" msgstr "Nemoguće preimenovati preimenovati '%s': %s" #: ../camel/providers/local/camel-maildir-folder.c:109 #: ../camel/providers/local/camel-maildir-folder.c:344 #: ../camel/providers/local/camel-mbox-folder.c:126 #: ../camel/providers/local/camel-mbox-folder.c:339 #: ../camel/providers/local/camel-mh-folder.c:157 msgid "No such message" msgstr "Nema takve poruke" #: ../camel/providers/local/camel-maildir-folder.c:234 #, c-format msgid "Cannot append message to maildir folder: %s: " msgstr "Nemoguće pridodati poruku u maildir mapu: %s: " #: ../camel/providers/local/camel-maildir-folder.c:282 #: ../camel/providers/local/camel-maildir-folder.c:292 #: ../camel/providers/local/camel-mbox-folder.c:400 #: ../camel/providers/local/camel-mh-folder.c:169 #: ../camel/providers/local/camel-mh-folder.c:179 #, c-format msgid "Cannot get message %s from folder %s: " msgstr "Nemoguće dobiti poruku %s iz mape %s: " #: ../camel/providers/local/camel-maildir-folder.c:362 #, c-format msgid "Cannot transfer message to destination folder: %s" msgstr "Nemoguće premjestiti poruku u odredišnu mapu: %s" #: ../camel/providers/local/camel-maildir-store.c:131 #: ../camel/providers/local/camel-maildir-store.c:931 #, c-format msgid "Cannot create folder containing '%s'" msgstr "" #: ../camel/providers/local/camel-maildir-store.c:139 #: ../camel/providers/local/camel-maildir-store.c:158 #: ../camel/providers/local/camel-maildir-store.c:923 #, c-format msgid "Folder %s already exists" msgstr "Direktorij %s već postoji" #: ../camel/providers/local/camel-maildir-store.c:266 #: ../camel/providers/local/camel-maildir-store.c:297 #: ../camel/providers/local/camel-mbox-store.c:401 #: ../camel/providers/local/camel-mbox-store.c:422 #, c-format msgid "Cannot create folder '%s': %s" msgstr "Nemoguće stvoriti mapu '%s': %s" #: ../camel/providers/local/camel-maildir-store.c:281 #: ../camel/providers/local/camel-mbox-store.c:367 #: ../camel/providers/local/camel-mh-store.c:523 #, c-format msgid "Cannot get folder '%s': %s" msgstr "Nemoguće dobiti mapu '%s': %s" #: ../camel/providers/local/camel-maildir-store.c:287 #: ../camel/providers/local/camel-mbox-store.c:377 #: ../camel/providers/local/camel-mh-store.c:532 #, c-format msgid "Cannot get folder '%s': folder does not exist." msgstr "Nemoguće dobiti mapu '%s': mapa ne postoji." #: ../camel/providers/local/camel-maildir-store.c:314 #, c-format msgid "Cannot get folder '%s': not a maildir directory." msgstr "Nemoguće dobiti mapu '%s': nije maildir direktorij." #: ../camel/providers/local/camel-maildir-store.c:378 #: ../camel/providers/local/camel-maildir-store.c:418 #: ../camel/providers/local/camel-mh-store.c:676 #, c-format msgid "Could not delete folder '%s': %s" msgstr "Nemouguće izbrisati mapu '%s': %s" #: ../camel/providers/local/camel-maildir-store.c:380 msgid "not a maildir directory" msgstr "nije maildir direktorij" #: ../camel/providers/local/camel-maildir-store.c:666 #: ../camel/providers/local/camel-maildir-store.c:1146 #: ../camel/providers/local/camel-spool-store.c:212 #: ../camel/providers/local/camel-spool-store.c:231 #, c-format msgid "Could not scan folder '%s': %s" msgstr "Nemoguće skenirati mapu '%s': %s" #: ../camel/providers/local/camel-maildir-summary.c:476 #: ../camel/providers/local/camel-maildir-summary.c:616 #, c-format msgid "Cannot open maildir directory path: %s: %s" msgstr "Nemoguće otvoriti putanju maildir direktorija: %s: %s" #: ../camel/providers/local/camel-maildir-summary.c:607 msgid "Checking folder consistency" msgstr "Provjeravanje dosljednosti mape" #: ../camel/providers/local/camel-maildir-summary.c:707 msgid "Checking for new messages" msgstr "Provjeravanje za nove poruke" #: ../camel/providers/local/camel-maildir-summary.c:810 #: ../camel/providers/local/camel-mbox-summary.c:466 #: ../camel/providers/local/camel-mbox-summary.c:687 #: ../camel/providers/local/camel-mbox-summary.c:836 #: ../camel/providers/local/camel-spool-summary.c:139 msgid "Storing folder" msgstr "Smještanje mape" #: ../camel/providers/local/camel-mbox-folder.c:196 #, c-format msgid "Cannot open mailbox: %s: " msgstr "Nemoguće otvoriti poštanski sandučić: %s: " #: ../camel/providers/local/camel-mbox-folder.c:262 #, c-format msgid "Cannot append message to mbox file: %s: " msgstr "Nemoguće pridodati poruku u datoteku poštanskog sandučića: %s: " #: ../camel/providers/local/camel-mbox-folder.c:392 msgid "The folder appears to be irrecoverably corrupted." msgstr "Mapa izgleda nepopravljivo oštećena." #: ../camel/providers/local/camel-mbox-folder.c:449 #: ../camel/providers/local/camel-spool-folder.c:67 #, c-format msgid "Cannot create folder lock on %s: %s" msgstr "Nemoguće zaključati mapu %s: %s" #: ../camel/providers/local/camel-mbox-store.c:389 #: ../camel/providers/local/camel-mbox-store.c:580 #, c-format msgid "Cannot create a folder by this name." msgstr "Nemoguće stvoriti mapu s ovim imenom." #: ../camel/providers/local/camel-mbox-store.c:433 #, c-format msgid "Cannot get folder '%s': not a regular file." msgstr "Nemoguće dobiti mapu '%s': nije regularna datoteka." #: ../camel/providers/local/camel-mbox-store.c:596 #, c-format msgid "Cannot create directory '%s': %s." msgstr "Nemoguće stvoriti direktorij '%s': %s." #: ../camel/providers/local/camel-mbox-store.c:608 #, c-format msgid "Cannot create folder: %s: %s" msgstr "Nemoguće stvoriti mapu: %s: %s" #: ../camel/providers/local/camel-mbox-store.c:610 msgid "Folder already exists" msgstr "Mapa već postoji" #: ../camel/providers/local/camel-mbox-store.c:650 #: ../camel/providers/local/camel-mbox-store.c:663 #: ../camel/providers/local/camel-mbox-store.c:692 #, c-format msgid "" "Could not delete folder '%s':\n" "%s" msgstr "" "Nemoguće obrisati mapu '%s':\n" "%s" #: ../camel/providers/local/camel-mbox-store.c:673 #, c-format msgid "'%s' is not a regular file." msgstr "'%s' nije regularna datoteka." #: ../camel/providers/local/camel-mbox-store.c:682 #, c-format msgid "Folder '%s' is not empty. Not deleted." msgstr "Mapa '%s' nije prazna. Nije obrisana." #: ../camel/providers/local/camel-mbox-store.c:709 #: ../camel/providers/local/camel-mbox-store.c:724 #, c-format msgid "Could not delete folder summary file '%s': %s" msgstr "Nemoguće obrisati datoteku sažetka mape '%s': %s" #: ../camel/providers/local/camel-mbox-store.c:806 #, c-format msgid "The new folder name is illegal." msgstr "Ime nove mape je neispravno." #: ../camel/providers/local/camel-mbox-store.c:822 #, c-format msgid "Could not rename '%s': '%s': %s" msgstr "Nemoguće preimenovati '%s': '%s': %s" #: ../camel/providers/local/camel-mbox-summary.c:476 #, c-format msgid "Could not open folder: %s: %s" msgstr "Nemoguće otvoriti mapu: %s: %s" #: ../camel/providers/local/camel-mbox-summary.c:611 #, c-format msgid "Cannot check folder: %s: %s" msgstr "Nemoguće provjeriti mapu: %s: %s" #: ../camel/providers/local/camel-mbox-summary.c:696 #: ../camel/providers/local/camel-mbox-summary.c:845 #: ../camel/providers/local/camel-spool-summary.c:146 #, c-format msgid "Could not open file: %s: %s" msgstr "Nemoguće otvoriti datoteku: %s: %s" #: ../camel/providers/local/camel-mbox-summary.c:715 #: ../camel/providers/local/camel-spool-summary.c:161 #, c-format msgid "Cannot open temporary mailbox: %s" msgstr "Nemoguće otvoriti privremeni sandučić: %s" #: ../camel/providers/local/camel-mbox-summary.c:732 #: ../camel/providers/local/camel-mbox-summary.c:967 #, c-format msgid "Could not close source folder %s: %s" msgstr "Nemoguće zatvoriti izvornu mapu%s: %s" #: ../camel/providers/local/camel-mbox-summary.c:745 #, c-format msgid "Could not close temporary folder: %s" msgstr "Nemoguće zatvoriti privremenu mapu: %s" #: ../camel/providers/local/camel-mbox-summary.c:764 #, c-format msgid "Could not rename folder: %s" msgstr "Nemoguće preimenovati mapu: %s" #: ../camel/providers/local/camel-mbox-summary.c:859 #: ../camel/providers/local/camel-mbox-summary.c:1132 #, c-format msgid "Could not store folder: %s" msgstr "Nemoguće smjestiti mapu: %s" #: ../camel/providers/local/camel-mbox-summary.c:898 #: ../camel/providers/local/camel-mbox-summary.c:1172 #, c-format msgid "" "MBOX file is corrupted, please fix it. (Expected a From line, but didn't get " "it.)" msgstr "" "MBOX datoteka je pokvarena, popravite ju. (Očekivano \"Iz retka\", ali nije " "dobijeno.)" #: ../camel/providers/local/camel-mbox-summary.c:908 #: ../camel/providers/local/camel-mbox-summary.c:1184 #, c-format msgid "Summary and folder mismatch, even after a sync" msgstr "Neslaganje sažetka i mape, čak i nakon usklađenja" #: ../camel/providers/local/camel-mbox-summary.c:1077 #: ../camel/providers/local/camel-spool-summary.c:356 #, c-format msgid "Unknown error: %s" msgstr "Nepoznata greška: %s" #: ../camel/providers/local/camel-mbox-summary.c:1242 #: ../camel/providers/local/camel-mbox-summary.c:1272 #, c-format msgid "Writing to temporary mailbox failed: %s" msgstr "Pisanje u privremeni sandučić nije uspjelo: %s" #: ../camel/providers/local/camel-mbox-summary.c:1261 #, c-format msgid "Writing to temporary mailbox failed: %s: %s" msgstr "Pisanje u privremeni sandučić nije uspjelo: %s: %s" #: ../camel/providers/local/camel-mh-folder.c:116 #, c-format msgid "Cannot append message to mh folder: %s: " msgstr "Nemoguće pridodati poruku u mh mapu: %s: " #: ../camel/providers/local/camel-mh-store.c:542 #, c-format msgid "Could not create folder '%s': %s" msgstr "Nemoguće stvoriti mapu '%s': %s" #: ../camel/providers/local/camel-mh-store.c:558 #, c-format msgid "Cannot get folder '%s': not a directory." msgstr "Nemoguće dobiti mapu '%s': nije direktorij." #: ../camel/providers/local/camel-mh-summary.c:236 #, c-format msgid "Cannot open MH directory path: %s: %s" msgstr "Nemoguće otvoriti putanju MH direktorija: %s: %s" #: ../camel/providers/local/camel-spool-store.c:95 #, c-format msgid "Spool '%s' cannot be opened: %s" msgstr "Spool '%s' se ne može otvoriti: %s" #: ../camel/providers/local/camel-spool-store.c:109 #, c-format msgid "Spool '%s' is not a regular file or directory" msgstr "Spool '%s' nije regularna datoteka ili direktorij" #: ../camel/providers/local/camel-spool-store.c:425 #, c-format msgid "Spool mail file %s" msgstr "Spool datoteka pošte %s" #: ../camel/providers/local/camel-spool-store.c:429 #, c-format msgid "Spool folder tree %s" msgstr "Stablo spool direktorija %s" #: ../camel/providers/local/camel-spool-store.c:432 msgid "Invalid spool" msgstr "" #: ../camel/providers/local/camel-spool-store.c:481 #, c-format msgid "Folder '%s/%s' does not exist." msgstr "Mapa '%s/%s' ne postoji." #: ../camel/providers/local/camel-spool-store.c:494 #, c-format msgid "" "Could not open folder '%s':\n" "%s" msgstr "" "Nemoguće otvoriti mapu '%s':\n" "%s" #: ../camel/providers/local/camel-spool-store.c:500 #, c-format msgid "Folder '%s' does not exist." msgstr "Mapa '%s' ne postoji." #: ../camel/providers/local/camel-spool-store.c:508 #, c-format msgid "" "Could not create folder '%s':\n" "%s" msgstr "" "Nemoguće stvoriti mapu '%s':\n" "%s" #: ../camel/providers/local/camel-spool-store.c:521 #, c-format msgid "'%s' is not a mailbox file." msgstr "'%s' nije datoteka poštanskog sandučića" #: ../camel/providers/local/camel-spool-store.c:585 #, c-format msgid "Store does not support an INBOX" msgstr "Spremnik ne podržava INBOX" #: ../camel/providers/local/camel-spool-store.c:604 #, c-format msgid "Spool folders cannot be deleted" msgstr "Spool mape se ne mogu brisati" #: ../camel/providers/local/camel-spool-store.c:619 #, c-format msgid "Spool folders cannot be renamed" msgstr "Spool mape se ne mogu preimenovati" #: ../camel/providers/local/camel-spool-summary.c:177 #: ../camel/providers/local/camel-spool-summary.c:189 #: ../camel/providers/local/camel-spool-summary.c:201 #, c-format msgid "Could not synchronize temporary folder %s: %s" msgstr "Nemoguće uskladiti privremenu mapu %s: %s" #: ../camel/providers/local/camel-spool-summary.c:219 #, c-format msgid "Could not synchronize spool folder %s: %s" msgstr "Nemoguće uskladiti spool mapu %s: %s" #: ../camel/providers/local/camel-spool-summary.c:253 #: ../camel/providers/local/camel-spool-summary.c:272 #: ../camel/providers/local/camel-spool-summary.c:285 #, c-format msgid "" "Could not synchronize spool folder %s: %s\n" "Folder may be corrupt, copy saved in '%s'" msgstr "" "Nemoguće uskladiti spool mapu %s: %s\n" "Mapa je možda pokvarena, kopija spremljena u '%s'" #: ../camel/providers/nntp/camel-nntp-folder.c:227 #: ../camel/providers/nntp/camel-nntp-folder.c:595 #, c-format msgid "Internal error: UID in invalid format: %s" msgstr "Unutarnja greška: UID u neispravnom obliku: %s" #: ../camel/providers/nntp/camel-nntp-folder.c:297 #: ../camel/providers/nntp/camel-nntp-folder.c:302 #: ../camel/providers/pop3/camel-pop3-folder.c:574 #: ../camel/providers/pop3/camel-pop3-folder.c:1002 #, c-format msgid "Cannot get message %s: %s" msgstr "Nemoguće dobiti poruku %s: %s" #: ../camel/providers/nntp/camel-nntp-folder.c:309 #: ../camel/providers/nntp/camel-nntp-folder.c:629 #: ../camel/providers/pop3/camel-pop3-folder.c:478 #: ../camel/providers/pop3/camel-pop3-folder.c:510 #: ../camel/providers/pop3/camel-pop3-folder.c:542 #: ../camel/providers/pop3/camel-pop3-folder.c:564 #: ../camel/providers/pop3/camel-pop3-folder.c:583 #, c-format msgid "Cannot get message %s: " msgstr "Nemoguće dobiti poruku %s: " #: ../camel/providers/nntp/camel-nntp-folder.c:435 #: ../camel/providers/nntp/camel-nntp-folder.c:441 #, c-format msgid "Posting failed: %s" msgstr "Neuspjelo slanje odgovora: %s" #: ../camel/providers/nntp/camel-nntp-folder.c:508 msgid "Posting failed: " msgstr "Neuspjelo slanje odgovora: " #: ../camel/providers/nntp/camel-nntp-folder.c:618 #, c-format msgid "This message is not currently available" msgstr "Ova poruka je trenutno nedostupna" #: ../camel/providers/nntp/camel-nntp-folder.c:727 #, c-format msgid "You cannot copy messages from a NNTP folder" msgstr "" #: ../camel/providers/nntp/camel-nntp-provider.c:45 msgid "" "_Show folders in short notation (e.g. c.o.linux rather than comp.os.linux)" msgstr "_Pokazuj mape u kraticama (npr. c.o.linux, a ne comp.os.linux)" #: ../camel/providers/nntp/camel-nntp-provider.c:48 msgid "In the subscription _dialog, show relative folder names" msgstr "U _dijalogu pretplate, pokazuj relativna imena mape" #: ../camel/providers/nntp/camel-nntp-provider.c:54 msgid "Default NNTP port" msgstr "Zadani NNTP port" #: ../camel/providers/nntp/camel-nntp-provider.c:55 msgid "NNTP over SSL" msgstr "NNTP putem SSL-a" #: ../camel/providers/nntp/camel-nntp-provider.c:61 msgid "USENET news" msgstr "USENET vijesti" #: ../camel/providers/nntp/camel-nntp-provider.c:63 msgid "This is a provider for reading from and posting to USENET newsgroups." msgstr "" "Ovo je pružatelj usluga za čitanje USENET grupa i slanje poruka na iste." #: ../camel/providers/nntp/camel-nntp-provider.c:84 msgid "" "This option will connect to the NNTP server anonymously, without " "authentication." msgstr "" #: ../camel/providers/nntp/camel-nntp-provider.c:94 msgid "" "This option will authenticate with the NNTP server using a plaintext " "password." msgstr "Prijava na NNTP poslužitelj korištenjem lozinke u čistom tekstu." #: ../camel/providers/nntp/camel-nntp-store.c:370 #, c-format msgid "Could not read greeting from %s: " msgstr "Nemoguće pročitati pozdrav od %s: " #: ../camel/providers/nntp/camel-nntp-store.c:378 #, c-format msgid "NNTP server %s returned error code %d: %s" msgstr "NNTP poslužitelj %s je uzvratio kodom o grešci %d: %s" #: ../camel/providers/nntp/camel-nntp-store.c:448 #, c-format msgid "USENET News via %s" msgstr "USENET vijesti preko %s" #: ../camel/providers/nntp/camel-nntp-store.c:1185 #, c-format msgid "" "Error retrieving newsgroups:\n" "\n" "%s" msgstr "" "Greška pri dohvatu grupa:\n" "\n" " %s" #: ../camel/providers/nntp/camel-nntp-store.c:1301 #, c-format msgid "You cannot create a folder in a News store: subscribe instead." msgstr "" "Ne možete stvoriti mapu u spremniku \"Vijesti\": umjesto toga otkažite " "pretplatu." #: ../camel/providers/nntp/camel-nntp-store.c:1317 #, c-format msgid "You cannot rename a folder in a News store." msgstr "Ne možete preimenovati mapu u spremniku \"Vijesti\"" #: ../camel/providers/nntp/camel-nntp-store.c:1340 #, c-format msgid "You cannot remove a folder in a News store: unsubscribe instead." msgstr "" "Ne možete ukloniti mapu u spremniku \"Vijesti\": umjesto toga otkažite " "pretplatu" #: ../camel/providers/nntp/camel-nntp-store.c:1550 #, c-format msgid "" "You cannot subscribe to this newsgroup:\n" "\n" "No such newsgroup. The selected item is a probably a parent folder." msgstr "" "Ne možete se pretplatiti na grupu:\n" "\n" "Ta grupa ne postoji. Odabrana stavka je vjerojatno nadređena mapa." #: ../camel/providers/nntp/camel-nntp-store.c:1617 #, c-format msgid "" "You cannot unsubscribe to this newsgroup:\n" "\n" "newsgroup does not exist!" msgstr "" "Ne možete odjaviti pretplatu s ove grupe:\n" "\n" "grupa ne postoji!" #: ../camel/providers/nntp/camel-nntp-store.c:2043 msgid "NNTP Command failed: " msgstr "Neuspješna NNTP naredba: " #: ../camel/providers/nntp/camel-nntp-store.c:2141 #, c-format msgid "Not connected." msgstr "Nije spojen." #: ../camel/providers/nntp/camel-nntp-store.c:2235 #, c-format msgid "No such folder: %s" msgstr "Nema takve mape: %s" #: ../camel/providers/nntp/camel-nntp-summary.c:197 #: ../camel/providers/nntp/camel-nntp-summary.c:337 #, c-format msgid "%s: Scanning new messages" msgstr "%s: Skeniranje novih poruka" #: ../camel/providers/nntp/camel-nntp-summary.c:219 #, c-format msgid "Unexpected server response from xover: %s" msgstr "Neočekivani odgovor poslužitelja od xover: %s" #: ../camel/providers/nntp/camel-nntp-summary.c:358 #, c-format msgid "Unexpected server response from head: %s" msgstr "Neočekivani odgovor poslužitelja od head: %s" #: ../camel/providers/nntp/camel-nntp-summary.c:406 #, c-format msgid "Operation failed: %s" msgstr "Neuspjela operacija: %s" #: ../camel/providers/pop3/camel-pop3-folder.c:357 #: ../camel/providers/pop3/camel-pop3-folder.c:441 #, c-format msgid "No message with UID %s" msgstr "Nema poruke s UID-om %s" #: ../camel/providers/pop3/camel-pop3-folder.c:457 #, c-format msgid "Retrieving POP message %d" msgstr "Preuzimanje POP poruke (%d)" #: ../camel/providers/pop3/camel-pop3-folder.c:575 msgid "Unknown reason" msgstr "Nepoznat razlog" #: ../camel/providers/pop3/camel-pop3-folder.c:644 msgid "Retrieving POP summary" msgstr "Preuzimanje POP sažetka" #: ../camel/providers/pop3/camel-pop3-folder.c:703 #: ../camel/providers/pop3/camel-pop3-folder.c:706 #: ../camel/providers/pop3/camel-pop3-folder.c:719 #: ../camel/providers/pop3/camel-pop3-folder.c:732 #: ../camel/providers/pop3/camel-pop3-folder.c:746 msgid "Cannot get POP summary: " msgstr "Nije moguće dobiti POP sažetak: " #: ../camel/providers/pop3/camel-pop3-folder.c:811 msgid "Expunging old messages" msgstr "Čišćenje starih poruka" #: ../camel/providers/pop3/camel-pop3-folder.c:839 msgid "Expunging deleted messages" msgstr "Čišćenje izbrisanih poruka" #: ../camel/providers/pop3/camel-pop3-provider.c:36 msgid "Message Storage" msgstr "Spremište poruke" #: ../camel/providers/pop3/camel-pop3-provider.c:38 msgid "_Leave messages on server" msgstr "_Ostavi poruke na poslužitelju" #. Translators: '%s' is replaced with a widget, where user can #. * select how many days can be message left on the server. #: ../camel/providers/pop3/camel-pop3-provider.c:42 #, c-format msgid "_Delete after %s day(s)" msgstr "_Obriši nakon %s dan(a)" #: ../camel/providers/pop3/camel-pop3-provider.c:44 msgid "Delete _expunged from local Inbox" msgstr "Obriši _obrisano iz lokalne dolazne pošte" #: ../camel/providers/pop3/camel-pop3-provider.c:46 msgid "Disable _support for all POP3 extensions" msgstr "Onemogući _podršku za sva POP3 proširenja" #: ../camel/providers/pop3/camel-pop3-provider.c:52 msgid "Default POP3 port" msgstr "Zadani POP3 port" #: ../camel/providers/pop3/camel-pop3-provider.c:53 msgid "POP3 over SSL" msgstr "POP3 putem SSL-a" #: ../camel/providers/pop3/camel-pop3-provider.c:60 msgid "POP" msgstr "POP" #: ../camel/providers/pop3/camel-pop3-provider.c:62 msgid "For connecting to and downloading mail from POP servers." msgstr "Za povezivanje i preuzimanje pošte sa POP poslužitelja." #: ../camel/providers/pop3/camel-pop3-provider.c:82 msgid "" "This option will connect to the POP server using a plaintext password. This " "is the only option supported by many POP servers." msgstr "" "Spajanje na POP poslužitelj korištenjem lozinke u čistom tekstom. Ovo je " "jedini način prijenosa kojeg podržavaju mnogi POP poslužitelji." #: ../camel/providers/pop3/camel-pop3-provider.c:92 msgid "" "This option will connect to the POP server using an encrypted password via " "the APOP protocol. This may not work for all users even on servers that " "claim to support it." msgstr "" "Spajanje na POP poslužitelj korištenjem šifrirane lozinke preko APOP " "protokola. Možda neće raditi svim korisnicima, čak i na poslužiteljma koji " "tvrde da to podržavaju." #. Translators: This is the separator between an error and an explanation #: ../camel/providers/pop3/camel-pop3-store.c:95 msgid ": " msgstr ": " #: ../camel/providers/pop3/camel-pop3-store.c:162 #, c-format msgid "Failed to read a valid greeting from POP server %s" msgstr "Neuspješno čitanje ispravnog pozdrava POP poslužitelja %s" #: ../camel/providers/pop3/camel-pop3-store.c:177 #, c-format msgid "Failed to connect to POP server %s in secure mode: %s" msgstr "" "Neuspjelo povezivanje na POP poslužitelj %s u sigurnosnom načinu rada: %s" #: ../camel/providers/pop3/camel-pop3-store.c:178 msgid "STLS not supported by server" msgstr "Poslužitelj ne podržava STLS" #. Translators: Last %s is an optional #. * explanation beginning with ": " separator. #: ../camel/providers/pop3/camel-pop3-store.c:199 #, c-format msgid "Failed to connect to POP server %s in secure mode%s" msgstr "Neuspješno povezivanje na POP poslužitelj %s u sigurnom načinu %s" #: ../camel/providers/pop3/camel-pop3-store.c:217 #, c-format msgid "Failed to connect to POP server %s in secure mode: " msgstr "Neuspjelo povezivanje na POP poslužitelj %s u sigurnom načinu rada: " #: ../camel/providers/pop3/camel-pop3-store.c:357 #, c-format msgid "Cannot login to POP server %s: SASL Protocol error" msgstr "" "Nemoguće se prijaviti na POP poslužitelj %s: greška kod SASL protokola" #: ../camel/providers/pop3/camel-pop3-store.c:379 #, c-format msgid "Failed to authenticate on POP server %s: " msgstr "Neuspješna ovjera na POP poslužitelj %s: " #: ../camel/providers/pop3/camel-pop3-store.c:487 #, c-format msgid "POP3 server %s" msgstr "POP3 poslužitelj %s" #: ../camel/providers/pop3/camel-pop3-store.c:490 #, c-format msgid "POP3 server for %s on %s" msgstr "POP3 poslužitelj za %s na %s" #: ../camel/providers/pop3/camel-pop3-store.c:702 #: ../camel/providers/pop3/camel-pop3-store.c:715 #: ../camel/providers/pop3/camel-pop3-store.c:797 #, c-format msgid "" "Unable to connect to POP server %s.\n" "Error sending password: " msgstr "" "Neuspjelo povezivanje na POP poslužitelj %s.\n" "Greška pri slanju lozinke: " #: ../camel/providers/pop3/camel-pop3-store.c:742 #, c-format msgid "" "Unable to connect to POP server %s:\tInvalid APOP ID received. Impersonation " "attack suspected. Please contact your admin." msgstr "" "Nemoguće spajanje na POP poslužitelj %s:\tPrimljen neispravan APOP ID. Možda " "se dogodio napad nepoznate osobe. Kontaktirajte svog administratora." #. Translators: Last %s is an optional explanation #. * beginning with ": " separator. #: ../camel/providers/pop3/camel-pop3-store.c:812 #, c-format msgid "" "Unable to connect to POP server %s.\n" "Error sending username%s" msgstr "" "Neuspjelo spajanje na POP poslužitelj %s.\n" "Greška pri slanju korisničkog imena%s" #: ../camel/providers/pop3/camel-pop3-store.c:896 #, c-format msgid "No such folder '%s'." msgstr "Nema takve mape '%s'" #: ../camel/providers/pop3/camel-pop3-store.c:913 #, c-format msgid "POP3 stores have no folder hierarchy" msgstr "POP3 spremnici nemaju hijerarhiju mapa" #: ../camel/providers/sendmail/camel-sendmail-provider.c:33 #: ../services/evolution-source-registry/builtin/sendmail.source.in.h:1 msgid "Sendmail" msgstr "Sendmail" #: ../camel/providers/sendmail/camel-sendmail-provider.c:35 msgid "" "For delivering mail by passing it to the \"sendmail\" program on the local " "system." msgstr "" "Za dostavu pošte prosljeđivanjem \"sendmail\" programu na lokalnom sustavu." #: ../camel/providers/sendmail/camel-sendmail-transport.c:46 msgid "sendmail" msgstr "sendmail" #: ../camel/providers/sendmail/camel-sendmail-transport.c:48 msgid "Mail delivery via the sendmail program" msgstr "Dostava pošte preko programa sendmail" #: ../camel/providers/sendmail/camel-sendmail-transport.c:137 #, c-format msgid "Failed to read From address" msgstr "" #: ../camel/providers/sendmail/camel-sendmail-transport.c:154 #, c-format msgid "Message send in offline mode is disabled" msgstr "" #: ../camel/providers/sendmail/camel-sendmail-transport.c:182 #, c-format msgid "Could not parse recipient list" msgstr "Nisam mogao obraditi popis primatelja" #: ../camel/providers/sendmail/camel-sendmail-transport.c:199 #, c-format msgid "Could not parse arguments" msgstr "" #: ../camel/providers/sendmail/camel-sendmail-transport.c:230 #, c-format msgid "Could not create pipe to '%s': %s: mail not sent" msgstr "" #: ../camel/providers/sendmail/camel-sendmail-transport.c:255 #, c-format msgid "Could not fork '%s': %s: mail not sent" msgstr "" #: ../camel/providers/sendmail/camel-sendmail-transport.c:304 msgid "Could not send message: " msgstr "Nemoguće slanje poruke: " #: ../camel/providers/sendmail/camel-sendmail-transport.c:334 #, c-format msgid "'%s' exited with signal %s: mail not sent." msgstr "" #: ../camel/providers/sendmail/camel-sendmail-transport.c:344 #, c-format msgid "Could not execute '%s': mail not sent." msgstr "" #: ../camel/providers/sendmail/camel-sendmail-transport.c:349 #, c-format msgid "'%s' exited with status %d: mail not sent." msgstr "" #: ../camel/providers/smtp/camel-smtp-provider.c:39 msgid "Default SMTP port" msgstr "Zadani SMTP port" #: ../camel/providers/smtp/camel-smtp-provider.c:40 msgid "SMTP over SSL" msgstr "SMTP putem SSL-a" #: ../camel/providers/smtp/camel-smtp-provider.c:41 msgid "Message submission port" msgstr "Port predaje poruka" #: ../camel/providers/smtp/camel-smtp-provider.c:47 msgid "SMTP" msgstr "SMTP" #: ../camel/providers/smtp/camel-smtp-provider.c:49 msgid "For delivering mail by connecting to a remote mailhub using SMTP." msgstr "" "Za dostavu pošte povezivanjem na udaljeni mailhub, korištenjem SMTP-a." #: ../camel/providers/smtp/camel-smtp-transport.c:237 #: ../camel/providers/smtp/camel-smtp-transport.c:244 msgid "Welcome response error: " msgstr "Greška u odgovoru na pozdrav: " #: ../camel/providers/smtp/camel-smtp-transport.c:280 #, c-format msgid "Failed to connect to SMTP server %s in secure mode: %s" msgstr "" "Nisam se mogao povezati na SMTP server %s u sigurnosnom načinu rada: %s" #: ../camel/providers/smtp/camel-smtp-transport.c:289 #: ../camel/providers/smtp/camel-smtp-transport.c:302 #: ../camel/providers/smtp/camel-smtp-transport.c:309 msgid "STARTTLS command failed: " msgstr "STARTTLS naredba neuspješna: " #: ../camel/providers/smtp/camel-smtp-transport.c:328 #, c-format msgid "Failed to connect to SMTP server %s in secure mode: " msgstr "" "Neuspjelo povezivanje na SMTP poslužitelj %s u sigurnom načinu rada: " #: ../camel/providers/smtp/camel-smtp-transport.c:439 #, c-format msgid "SMTP server %s" msgstr "SMTP poslužitelj %s" #: ../camel/providers/smtp/camel-smtp-transport.c:442 #, c-format msgid "SMTP mail delivery via %s" msgstr "SMTP dostava pošte preko %s" #: ../camel/providers/smtp/camel-smtp-transport.c:574 #, c-format msgid "SMTP server %s does not support %s authentication" msgstr "" #: ../camel/providers/smtp/camel-smtp-transport.c:655 #, c-format msgid "No SASL mechanism was specified" msgstr "" #: ../camel/providers/smtp/camel-smtp-transport.c:691 msgid "AUTH command failed: Not connected." msgstr "" #: ../camel/providers/smtp/camel-smtp-transport.c:698 #: ../camel/providers/smtp/camel-smtp-transport.c:712 #: ../camel/providers/smtp/camel-smtp-transport.c:724 msgid "AUTH command failed: " msgstr "AUTH naredba neuspješna: " #: ../camel/providers/smtp/camel-smtp-transport.c:880 #, c-format msgid "Cannot send message: service not connected." msgstr "Nemoguće poslati poruku: nema veze s uslugom.." #: ../camel/providers/smtp/camel-smtp-transport.c:889 #, c-format msgid "Cannot send message: sender address not valid." msgstr "Nemoguće poslati poruku: adresa pošiljatelja nije ispravna." #: ../camel/providers/smtp/camel-smtp-transport.c:893 msgid "Sending message" msgstr "Slanje poruke" #: ../camel/providers/smtp/camel-smtp-transport.c:922 #, c-format msgid "Cannot send message: no recipients defined." msgstr "Nemoguće poslati poruku: nisu određeni primatelji." #: ../camel/providers/smtp/camel-smtp-transport.c:937 #, c-format msgid "Cannot send message: one or more invalid recipients" msgstr "Nemoguće poslati poruku: jedan ili više neispravnih primatelja" #: ../camel/providers/smtp/camel-smtp-transport.c:1069 msgid "Syntax error, command unrecognized" msgstr "Greška u sintaksi, naredba neprepoznata" #: ../camel/providers/smtp/camel-smtp-transport.c:1071 msgid "Syntax error in parameters or arguments" msgstr "Greška u sintaksi u parametrima ili argumentima" #: ../camel/providers/smtp/camel-smtp-transport.c:1073 msgid "Command not implemented" msgstr "Naredba nije ostvarena" #: ../camel/providers/smtp/camel-smtp-transport.c:1075 msgid "Command parameter not implemented" msgstr "Parametar naredbe nije ostvaren" #: ../camel/providers/smtp/camel-smtp-transport.c:1077 msgid "System status, or system help reply" msgstr "Status sustava, ili odgovor na pomoć" #: ../camel/providers/smtp/camel-smtp-transport.c:1079 msgid "Help message" msgstr "Poruka o pomoći" #: ../camel/providers/smtp/camel-smtp-transport.c:1081 msgid "Service ready" msgstr "Servis spreman" #: ../camel/providers/smtp/camel-smtp-transport.c:1083 msgid "Service closing transmission channel" msgstr "Servis zatvara prijenosni kanal" #: ../camel/providers/smtp/camel-smtp-transport.c:1085 msgid "Service not available, closing transmission channel" msgstr "Servis nije dostupan, zatvaram prijenosni kanal" #: ../camel/providers/smtp/camel-smtp-transport.c:1087 msgid "Requested mail action okay, completed" msgstr "Tražena akcija za poštu u redu, gotovo" #: ../camel/providers/smtp/camel-smtp-transport.c:1089 msgid "User not local; will forward to " msgstr "Korisnik nije lokalan; proslijediću na " #: ../camel/providers/smtp/camel-smtp-transport.c:1091 msgid "Requested mail action not taken: mailbox unavailable" msgstr "Tražena radnja za poštu nije napravljena: nedostupan sandučić" #: ../camel/providers/smtp/camel-smtp-transport.c:1093 msgid "Requested action not taken: mailbox unavailable" msgstr "Tražena radnja nije napravljena: nedostupan sandučić" #: ../camel/providers/smtp/camel-smtp-transport.c:1095 msgid "Requested action aborted: error in processing" msgstr "Tražena radnja nije napravljena: greška u obradi" #: ../camel/providers/smtp/camel-smtp-transport.c:1097 msgid "User not local; please try " msgstr "Korisnik nije lokalan; pokušajte " #: ../camel/providers/smtp/camel-smtp-transport.c:1099 msgid "Requested action not taken: insufficient system storage" msgstr "Tražena akcija nije napravljena: nedovoljno prostora na računalu" #: ../camel/providers/smtp/camel-smtp-transport.c:1101 msgid "Requested mail action aborted: exceeded storage allocation" msgstr "Tražena poštanska radnja otkazana: dodijeljeni prostor premašen" #: ../camel/providers/smtp/camel-smtp-transport.c:1103 msgid "Requested action not taken: mailbox name not allowed" msgstr "Tražena radnja nije napravljena: ime sandučića nije dozvoljeno" #: ../camel/providers/smtp/camel-smtp-transport.c:1105 msgid "Start mail input; end with ." msgstr "Počni unos pošte; završava sa ." #: ../camel/providers/smtp/camel-smtp-transport.c:1107 msgid "Transaction failed" msgstr "Prijenos neuspješan" #: ../camel/providers/smtp/camel-smtp-transport.c:1111 msgid "A password transition is needed" msgstr "Potrebna je izmjena lozinke" #: ../camel/providers/smtp/camel-smtp-transport.c:1113 msgid "Authentication mechanism is too weak" msgstr "Mehanizam ovjere je preslab" #: ../camel/providers/smtp/camel-smtp-transport.c:1115 msgid "Encryption required for requested authentication mechanism" msgstr "Obavezno šifriranje za traženi mehanizam ovjere" #: ../camel/providers/smtp/camel-smtp-transport.c:1117 msgid "Temporary authentication failure" msgstr "Neuspjela privremena ovjera" #: ../camel/providers/smtp/camel-smtp-transport.c:1407 msgid "SMTP Greeting" msgstr "SMTP pozdrav" #: ../camel/providers/smtp/camel-smtp-transport.c:1416 #: ../camel/providers/smtp/camel-smtp-transport.c:1429 #: ../camel/providers/smtp/camel-smtp-transport.c:1436 msgid "HELO command failed: " msgstr "HELO naredba neuspješna: " #: ../camel/providers/smtp/camel-smtp-transport.c:1512 #: ../camel/providers/smtp/camel-smtp-transport.c:1526 #: ../camel/providers/smtp/camel-smtp-transport.c:1535 msgid "MAIL FROM command failed: " msgstr "MAIL FROM naredba neuspješna: " #: ../camel/providers/smtp/camel-smtp-transport.c:1563 msgid "RCPT TO command failed: " msgstr "RCPT TO naredba neuspješna: " #: ../camel/providers/smtp/camel-smtp-transport.c:1579 #: ../camel/providers/smtp/camel-smtp-transport.c:1588 #, c-format msgid "RCPT TO <%s> failed: " msgstr "RCPT TO <%s> neuspješno: " #: ../camel/providers/smtp/camel-smtp-transport.c:1660 #: ../camel/providers/smtp/camel-smtp-transport.c:1671 #: ../camel/providers/smtp/camel-smtp-transport.c:1682 #: ../camel/providers/smtp/camel-smtp-transport.c:1744 #: ../camel/providers/smtp/camel-smtp-transport.c:1762 #: ../camel/providers/smtp/camel-smtp-transport.c:1775 #: ../camel/providers/smtp/camel-smtp-transport.c:1783 msgid "DATA command failed: " msgstr "DATA naredba neuspješna: " #: ../camel/providers/smtp/camel-smtp-transport.c:1809 #: ../camel/providers/smtp/camel-smtp-transport.c:1823 #: ../camel/providers/smtp/camel-smtp-transport.c:1831 msgid "RSET command failed: " msgstr "REST naredba neuspješna: " #: ../camel/providers/smtp/camel-smtp-transport.c:1857 #: ../camel/providers/smtp/camel-smtp-transport.c:1869 #: ../camel/providers/smtp/camel-smtp-transport.c:1875 msgid "QUIT command failed: " msgstr "QUIT naredba neuspješna: " #: ../data/org.gnome.evolution-data-server.addressbook.gschema.xml.in.h:1 msgid "Contact UID of a user" msgstr "" #: ../data/org.gnome.evolution-data-server.calendar.gschema.xml.in.h:1 msgid "Birthday and anniversary reminder" msgstr "" #: ../data/org.gnome.evolution-data-server.calendar.gschema.xml.in.h:2 msgid "Whether to set a reminder for birthdays and anniversaries" msgstr "" #: ../data/org.gnome.evolution-data-server.calendar.gschema.xml.in.h:3 msgid "Birthday and anniversary reminder value" msgstr "" #: ../data/org.gnome.evolution-data-server.calendar.gschema.xml.in.h:4 msgid "Number of units for determining a birthday or anniversary reminder" msgstr "" #: ../data/org.gnome.evolution-data-server.calendar.gschema.xml.in.h:5 msgid "Birthday and anniversary reminder units" msgstr "" #: ../data/org.gnome.evolution-data-server.calendar.gschema.xml.in.h:6 msgid "" "Units for a birthday or anniversary reminder, \"minutes\", \"hours\" or " "\"days\"" msgstr "" #: ../data/org.gnome.evolution-data-server.gschema.xml.in.h:1 msgid "Whether the migration of old setting was already done" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:1 msgid "(Deprecated) Proxy type to use" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:2 msgid "" "This key was deprecated in version 3.12 and should no longer be used. Proxy " "settings are now integrated into Evolution-Data-Server's account system. See " "the ESourceProxy API documentation for details." msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:3 msgid "(Deprecated) Whether to use http-proxy" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:4 msgid "(Deprecated) Whether proxy server requires authentication" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:5 msgid "(Deprecated) Host name for HTTP requests" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:6 msgid "(Deprecated) Port number for HTTP requests" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:7 msgid "(Deprecated) Proxy authentication user name" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:8 msgid "(Deprecated) Proxy authentication password" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:9 msgid "(Deprecated) List of hosts to connect to without proxy" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:10 msgid "(Deprecated) Host name for HTTPS requests" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:11 msgid "(Deprecated) Port number for HTTPS requests" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:12 msgid "(Deprecated) Host name for SOCKS requests" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:13 msgid "(Deprecated) Port number for SOCKS requests" msgstr "" #: ../data/org.gnome.evolution.shell.network-config.gschema.xml.in.h:14 msgid "(Deprecated) Automatic proxy configuration URL" msgstr "" #: ../libebackend/e-collection-backend.c:976 #, c-format msgid "%s does not support creating remote resources" msgstr "" #: ../libebackend/e-collection-backend.c:1035 #, c-format msgid "%s does not support deleting remote resources" msgstr "" #: ../libebackend/e-data-factory.c:1292 #, c-format msgid "Backend factory for source '%s' and extension '%s' cannot be found." msgstr "" #: ../libebackend/e-server-side-source.c:141 #, c-format msgid "Data source is missing a [%s] group" msgstr "" #: ../libebackend/e-server-side-source.c:466 msgid "Failed to lookup credentials: " msgstr "" #: ../libebackend/e-server-side-source.c:1391 ../libedataserver/e-source.c:1595 #, c-format msgid "Data source '%s' does not support creating remote resources" msgstr "" #: ../libebackend/e-server-side-source.c:1405 #, c-format msgid "" "Data source '%s' has no collection backend to create the remote resource" msgstr "" #: ../libebackend/e-server-side-source.c:1433 ../libedataserver/e-source.c:1708 #, c-format msgid "Data source '%s' does not support deleting remote resources" msgstr "" #: ../libebackend/e-server-side-source.c:1447 #, c-format msgid "" "Data source '%s' has no collection backend to delete the remote resource" msgstr "" #: ../libebackend/e-server-side-source.c:1478 ../libedataserver/e-source.c:1804 #: ../modules/ubuntu-online-accounts/module-ubuntu-online-accounts.c:1079 #, c-format msgid "Data source '%s' does not support OAuth 2.0 authentication" msgstr "" #: ../libebackend/e-server-side-source.c:1856 #, c-format msgid "File must have a '.source' extension" msgstr "" #: ../libebackend/e-source-registry-server.c:319 #, c-format msgid "UID '%s' is already in use" msgstr "" #: ../libebackend/e-subprocess-factory.c:285 #, c-format msgid "No such source for UID '%s'" msgstr "" #: ../libebackend/e-user-prompter-server.c:305 #, c-format msgid "Extension dialog '%s' not found." msgstr "" #: ../libedataserver/e-categories.c:49 msgctxt "CategoryName" msgid "Anniversary" msgstr "Godišnjica" #: ../libedataserver/e-categories.c:50 msgctxt "CategoryName" msgid "Birthday" msgstr "Rođendan" #: ../libedataserver/e-categories.c:51 msgctxt "CategoryName" msgid "Business" msgstr "Posao" #: ../libedataserver/e-categories.c:52 msgctxt "CategoryName" msgid "Competition" msgstr "Natjecanje" #: ../libedataserver/e-categories.c:53 msgctxt "CategoryName" msgid "Favorites" msgstr "Favoriti" #: ../libedataserver/e-categories.c:54 msgctxt "CategoryName" msgid "Gifts" msgstr "Pokloni" #: ../libedataserver/e-categories.c:55 msgctxt "CategoryName" msgid "Goals/Objectives" msgstr "Planovi/ciljevi" #: ../libedataserver/e-categories.c:56 msgctxt "CategoryName" msgid "Holiday" msgstr "Praznik" #: ../libedataserver/e-categories.c:57 msgctxt "CategoryName" msgid "Holiday Cards" msgstr "Razglednice" #. important people (e.g. new business partners) #: ../libedataserver/e-categories.c:59 msgctxt "CategoryName" msgid "Hot Contacts" msgstr "Važni kontakti" #: ../libedataserver/e-categories.c:60 msgctxt "CategoryName" msgid "Ideas" msgstr "Ideje" #: ../libedataserver/e-categories.c:61 msgctxt "CategoryName" msgid "International" msgstr "Međunarodni" #: ../libedataserver/e-categories.c:62 msgctxt "CategoryName" msgid "Key Customer" msgstr "Ključni klijent" #: ../libedataserver/e-categories.c:63 msgctxt "CategoryName" msgid "Miscellaneous" msgstr "Razno" #: ../libedataserver/e-categories.c:64 msgctxt "CategoryName" msgid "Personal" msgstr "Osobno" #: ../libedataserver/e-categories.c:65 msgctxt "CategoryName" msgid "Phone Calls" msgstr "Telefonski pozivi" #. Translators: "Status" is a category name; it can mean anything user wants to #: ../libedataserver/e-categories.c:67 msgctxt "CategoryName" msgid "Status" msgstr "Stanje" #: ../libedataserver/e-categories.c:68 msgctxt "CategoryName" msgid "Strategies" msgstr "Strategije" #: ../libedataserver/e-categories.c:69 msgctxt "CategoryName" msgid "Suppliers" msgstr "Dobavljači" #: ../libedataserver/e-categories.c:70 msgctxt "CategoryName" msgid "Time & Expenses" msgstr "Vrijeme i troškovi" #: ../libedataserver/e-categories.c:71 msgctxt "CategoryName" msgid "VIP" msgstr "VIP" #: ../libedataserver/e-categories.c:72 msgctxt "CategoryName" msgid "Waiting" msgstr "Čekanje" #: ../libedataserver/e-client.c:146 msgid "Source not loaded" msgstr "Izvor nije učitan" #: ../libedataserver/e-client.c:148 msgid "Source already loaded" msgstr "Izvor je već učitan" #. Translators: This means that the EClient does not #. * support offline mode, or it's not set to by a user, #. * thus it is unavailable while user is not connected. #: ../libedataserver/e-client.c:159 msgid "Offline unavailable" msgstr "Rad van mreže nije dostupan" #: ../libedataserver/e-client.c:181 msgid "D-Bus error" msgstr "D-Bus greška" #: ../libedataserver/e-client.c:2023 msgid "Timeout was reached" msgstr "" #: ../libedataserver/e-source.c:771 #, c-format msgid "Source file is missing a [%s] group" msgstr "" #: ../libedataserver/e-source.c:1375 #, c-format msgid "Data source '%s' is not removable" msgstr "" #: ../libedataserver/e-source.c:1498 #, c-format msgid "Data source '%s' is not writable" msgstr "" #: ../libedataserver/e-source.c:2194 msgid "Unnamed" msgstr "" #: ../libedataserver/e-source-credentials-provider-impl.c:41 msgid "Credentials lookup is not supported" msgstr "" #: ../libedataserver/e-source-credentials-provider-impl.c:54 msgid "Credentials store is not supported" msgstr "" #: ../libedataserver/e-source-credentials-provider-impl.c:65 msgid "Credentials delete is not supported" msgstr "" #: ../libedataserver/e-source-credentials-provider-impl-password.c:81 msgid "Password not found" msgstr "" #: ../libedataserver/e-source-mail-signature.c:481 #, c-format msgid "Signature script must be a local file" msgstr "" #: ../libedataserver/e-source-proxy.c:1641 #, c-format msgid "Source '%s' does not support proxy lookups" msgstr "" #. strptime format of a weekday, a date and a time, #. * in 12-hour format. #. strftime format of a weekday, a date and a #. * time, in 12-hour format. #: ../libedataserver/e-time-utils.c:1692 ../libedataserver/e-time-utils.c:1991 msgid "%a %m/%d/%Y %I:%M:%S %p" msgstr "%a, %d.%m.%Y. %I:%M:%S %p" #. strptime format of a weekday, a date and a time, #. * in 24-hour format. #. strftime format of a weekday, a date and a #. * time, in 24-hour format. #: ../libedataserver/e-time-utils.c:1697 ../libedataserver/e-time-utils.c:1982 msgid "%a %m/%d/%Y %H:%M:%S" msgstr "%a %d/%m/%Y %H:%M:%S" #. strptime format of a weekday, a date and a time, #. * in 12-hour format, without seconds. #. strftime format of a weekday, a date and a #. * time, in 12-hour format, without seconds. #: ../libedataserver/e-time-utils.c:1702 ../libedataserver/e-time-utils.c:1987 msgid "%a %m/%d/%Y %I:%M %p" msgstr "%a %d/%m/%Y %I:%M %p" #. strptime format of a weekday, a date and a time, #. * in 24-hour format, without seconds. #. strftime format of a weekday, a date and a #. * time, in 24-hour format, without seconds. #: ../libedataserver/e-time-utils.c:1707 ../libedataserver/e-time-utils.c:1978 msgid "%a %m/%d/%Y %H:%M" msgstr "%a %m/%d/%Y %H:%M" #. strptime format of a weekday, a date and a time, #. * in 12-hour format, without minutes or seconds. #: ../libedataserver/e-time-utils.c:1712 msgid "%a %m/%d/%Y %I %p" msgstr "%a %d/%m/%Y %I %p" #. strptime format of a weekday, a date and a time, #. * in 24-hour format, without minutes or seconds. #: ../libedataserver/e-time-utils.c:1717 msgid "%a %m/%d/%Y %H" msgstr "%a %m/%d/%Y %H" #. strptime format of a weekday and a date. #. strftime format of a weekday and a date. #: ../libedataserver/e-time-utils.c:1720 ../libedataserver/e-time-utils.c:1840 #: ../libedataserver/e-time-utils.c:1973 msgid "%a %m/%d/%Y" msgstr "%a %m/%d/%Y" #. strptime format of a date and a time, in 12-hour format. #: ../libedataserver/e-time-utils.c:1727 msgid "%m/%d/%Y %I:%M:%S %p" msgstr "%m/%d/%Y %I:%M:%S %p" #. strptime format of a date and a time, in 24-hour format. #: ../libedataserver/e-time-utils.c:1731 msgid "%m/%d/%Y %H:%M:%S" msgstr "%m/%d/%Y %H:%M:%S" #. strptime format of a date and a time, in 12-hour format, #. * without seconds. #: ../libedataserver/e-time-utils.c:1736 msgid "%m/%d/%Y %I:%M %p" msgstr "%m/%d/%Y %I:%M %p" #. strptime format of a date and a time, in 24-hour format, #. * without seconds. #: ../libedataserver/e-time-utils.c:1741 msgid "%m/%d/%Y %H:%M" msgstr "%m/%d/%Y %H:%M" #. strptime format of a date and a time, in 12-hour format, #. * without minutes or seconds. #: ../libedataserver/e-time-utils.c:1746 msgid "%m/%d/%Y %I %p" msgstr "%d.%m.%Y %I %p" #. strptime format of a date and a time, in 24-hour format, #. * without minutes or seconds. #: ../libedataserver/e-time-utils.c:1751 msgid "%m/%d/%Y %H" msgstr "%d.%m.%Y %H" #. strptime format of a weekday and a date. #. This is the preferred date format for the locale. #: ../libedataserver/e-time-utils.c:1754 ../libedataserver/e-time-utils.c:1843 msgid "%m/%d/%Y" msgstr "%d.%m.%Y" #. strptime format for a time of day, in 12-hour format. #. strftime format of a time in 12-hour format. #: ../libedataserver/e-time-utils.c:1914 ../libedataserver/e-time-utils.c:2035 msgid "%I:%M:%S %p" msgstr "%I:%M:%S %p" #. strptime format for a time of day, in 24-hour format. #. strftime format of a time in 24-hour format. #: ../libedataserver/e-time-utils.c:1918 ../libedataserver/e-time-utils.c:2027 msgid "%H:%M:%S" msgstr "%H:%M:%S" #. strptime format for time of day, without seconds, #. * in 12-hour format. #. strftime format of a time in 12-hour format, #. * without seconds. #: ../libedataserver/e-time-utils.c:1923 ../libedataserver/e-time-utils.c:2032 msgid "%I:%M %p" msgstr "%I:%M %p" #. strptime format for time of day, without seconds 24-hour format. #. strftime format of a time in 24-hour format, #. * without seconds. #: ../libedataserver/e-time-utils.c:1927 ../libedataserver/e-time-utils.c:2024 msgid "%H:%M" msgstr "%H:%M" #. strptime format for time of day, without seconds 24-hour format, #. * and no colon. #: ../libedataserver/e-time-utils.c:1931 msgid "%H%M" msgstr "%H%M" #. strptime format for hour and AM/PM, 12-hour format. #: ../libedataserver/e-time-utils.c:1935 msgid "%I %p" msgstr "%I %p" #: ../libedataserver/e-webdav-discover.c:468 #: ../libedataserver/e-webdav-discover.c:477 #, c-format msgid "HTTP Error: %s" msgstr "" #: ../libedataserver/e-webdav-discover.c:507 msgid "Could not parse response" msgstr "" #: ../libedataserver/e-webdav-discover.c:516 msgid "Empty response" msgstr "" #: ../libedataserver/e-webdav-discover.c:524 msgid "Unexpected reply from server" msgstr "" #: ../libedataserverui/e-credentials-prompter.c:259 #: ../libedataserverui/e-credentials-prompter.c:1561 #: ../libedataserverui/e-credentials-prompter.c:1605 msgid "Credentials prompt was cancelled" msgstr "" #: ../libedataserverui/e-credentials-prompter.c:663 #, c-format msgid "Source '%s' doesn't support prompt for credentials" msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:133 msgid "Address book authentication request" msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:138 msgid "Calendar authentication request" msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:142 msgid "Mail authentication request" msgstr "" #. generic account prompt #: ../libedataserverui/e-credentials-prompter-impl-password.c:145 msgid "Authentication request" msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:156 #, c-format msgid "Please enter the password for address book \"%s\"." msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:160 #, c-format msgid "Please enter the password for calendar \"%s\"." msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:164 #, c-format msgid "Please enter the password for mail account \"%s\"." msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:168 #, c-format msgid "Please enter the password for mail transport \"%s\"." msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:172 #, c-format msgid "Please enter the password for memo list \"%s\"." msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:176 #, c-format msgid "Please enter the password for task list \"%s\"." msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:180 #, c-format msgid "Please enter the password for account \"%s\"." msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:229 #: ../libedataserverui/e-trust-prompt.c:114 #: ../libedataserverui/e-webdav-discover-widget.c:1063 msgid "_Cancel" msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:230 #: ../libedataserverui/e-webdav-discover-widget.c:1064 msgid "_OK" msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:340 msgid "_User Name:" msgstr "" #: ../libedataserverui/e-credentials-prompter-impl-password.c:352 msgid "_Password:" msgstr "" #. Remember password check #: ../libedataserverui/e-credentials-prompter-impl-password.c:368 msgid "_Add this password to your keyring" msgstr "_Dodajte ovu lozinku u vaš skup ključeva" #: ../libedataserverui/e-trust-prompt.c:113 #: ../modules/trust-prompt/trust-prompt-gtk.c:119 msgid "Certificate trust..." msgstr "" #: ../libedataserverui/e-trust-prompt.c:115 #: ../modules/trust-prompt/trust-prompt-gtk.c:120 msgid "_Reject" msgstr "" #: ../libedataserverui/e-trust-prompt.c:116 #: ../modules/trust-prompt/trust-prompt-gtk.c:121 msgid "Accept _Temporarily" msgstr "" #: ../libedataserverui/e-trust-prompt.c:117 #: ../modules/trust-prompt/trust-prompt-gtk.c:122 msgid "_Accept Permanently" msgstr "" #: ../libedataserverui/e-trust-prompt.c:188 #: ../modules/trust-prompt/trust-prompt-gtk.c:159 #, c-format msgid "SSL certificate for '%s' is not trusted. Do you wish to accept it?" msgstr "" #: ../libedataserverui/e-trust-prompt.c:210 #: ../modules/trust-prompt/trust-prompt-gtk.c:174 msgid "Reason:" msgstr "" #: ../libedataserverui/e-trust-prompt.c:213 msgid "Detailed error:" msgstr "" #: ../libedataserverui/e-trust-prompt.c:275 #: ../modules/trust-prompt/module-trust-prompt.c:82 msgid "The signing certificate authority is not known." msgstr "" #: ../libedataserverui/e-trust-prompt.c:277 #: ../modules/trust-prompt/module-trust-prompt.c:84 msgid "" "The certificate does not match the expected identity of the site that it was " "retrieved from." msgstr "" #: ../libedataserverui/e-trust-prompt.c:279 #: ../modules/trust-prompt/module-trust-prompt.c:86 msgid "The certificate's activation time is still in the future." msgstr "" #: ../libedataserverui/e-trust-prompt.c:281 #: ../modules/trust-prompt/module-trust-prompt.c:88 msgid "The certificate has expired." msgstr "" #: ../libedataserverui/e-trust-prompt.c:283 #: ../modules/trust-prompt/module-trust-prompt.c:90 msgid "" "The certificate has been revoked according to the connection's certificate " "revocation list." msgstr "" #: ../libedataserverui/e-trust-prompt.c:285 #: ../modules/trust-prompt/module-trust-prompt.c:92 msgid "The certificate's algorithm is considered insecure." msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:166 msgid "Supports" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:177 msgid "_User mail:" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:523 msgctxt "WebDAVDiscover" msgid "Contacts" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:524 msgctxt "WebDAVDiscover" msgid "Events" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:525 msgctxt "WebDAVDiscover" msgid "Memos" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:526 msgctxt "WebDAVDiscover" msgid "Tasks" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:825 msgid "Invalid URL" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:839 msgid "User name not filled" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:880 msgid "Cancel" msgstr "" #: ../libedataserverui/e-webdav-discover-widget.c:883 msgid "Searching server sources..." msgstr "" #: ../modules/gnome-online-accounts/e-goa-password-based.c:210 #, c-format msgid "" "Cannot find a corresponding account in the org.gnome.OnlineAccounts service " "from which to obtain a password for '%s'" msgstr "" #: ../modules/gnome-online-accounts/e-goa-password-based.c:273 msgid "Failed to get password from GOA: " msgstr "" #. TODO: more specific #: ../modules/gnome-online-accounts/goaewsclient.c:219 #, c-format msgid "Code: %u - Unexpected response from server" msgstr "" #. TODO: more specific #: ../modules/gnome-online-accounts/goaewsclient.c:240 #, c-format msgid "Failed to parse autodiscover response XML" msgstr "" #. TODO: more specific #: ../modules/gnome-online-accounts/goaewsclient.c:249 #, c-format msgid "Failed to find Autodiscover element" msgstr "" #. TODO: more specific #: ../modules/gnome-online-accounts/goaewsclient.c:261 #, c-format msgid "Failed to find Response element" msgstr "" #. TODO: more specific #: ../modules/gnome-online-accounts/goaewsclient.c:273 #, c-format msgid "Failed to find Account element" msgstr "" #. TODO: more specific #: ../modules/gnome-online-accounts/goaewsclient.c:287 #, c-format msgid "Failed to find ASUrl and OABUrl in autodiscover response" msgstr "" #: ../modules/gnome-online-accounts/module-gnome-online-accounts.c:1235 #, c-format msgid "" "Cannot find a corresponding account in the org.gnome.OnlineAccounts service " "from which to obtain an access token for '%s'" msgstr "" #: ../modules/gnome-online-accounts/module-gnome-online-accounts.c:1265 #, c-format msgid "Failed to obtain an access token for '%s': " msgstr "" #: ../modules/google-backend/module-google-backend.c:461 #: ../modules/yahoo-backend/module-yahoo-backend.c:226 msgid "Tasks" msgstr "Zadaci" #: ../modules/google-backend/module-google-backend.c:515 #: ../modules/ubuntu-online-accounts/contacts.service-type.in.in.h:1 #: ../services/evolution-source-registry/builtin/contacts-stub.source.in.h:1 msgid "Contacts" msgstr "Kontakti" #: ../modules/ubuntu-online-accounts/calendar.service-type.in.in.h:1 #: ../modules/yahoo-backend/module-yahoo-backend.c:199 msgid "Calendar" msgstr "Kalendar" #: ../modules/ubuntu-online-accounts/calendar.service-type.in.in.h:2 msgid "Integrate your calendars" msgstr "Integrira vaše kalendare" #: ../modules/ubuntu-online-accounts/contacts.service-type.in.in.h:2 msgid "Integrate your contacts" msgstr "Integrira vaše kontakte" #: ../modules/ubuntu-online-accounts/e-signon-session-password.c:272 msgid "Signon service did not return a secret" msgstr "" #: ../modules/ubuntu-online-accounts/evolution-data-server-uoa.desktop.in.in.h:1 msgid "Evolution Data Server" msgstr "Evolution poslužitelj podataka" #: ../modules/ubuntu-online-accounts/evolution-data-server-uoa.desktop.in.in.h:2 msgid "Required to have EDS appear in UOA" msgstr "" #: ../modules/ubuntu-online-accounts/google-calendar.service.in.in.h:1 msgid "Google Calendar" msgstr "Google kalendar" #: ../modules/ubuntu-online-accounts/google-contacts.service.in.in.h:1 msgid "Google Contacts" msgstr "Google kontakti" #: ../modules/ubuntu-online-accounts/google-gmail.service.in.in.h:1 msgid "GMail" msgstr "GMail" #: ../modules/ubuntu-online-accounts/mail.service-type.in.in.h:1 msgid "Mail" msgstr "" #: ../modules/ubuntu-online-accounts/mail.service-type.in.in.h:2 msgid "Integrate your mailboxes" msgstr "Integrira vašu e-poštu" #: ../modules/ubuntu-online-accounts/module-ubuntu-online-accounts.c:1060 #, c-format msgid "" "Cannot find a corresponding account service in the accounts database from " "which to obtain an access token for '%s'" msgstr "" #: ../modules/ubuntu-online-accounts/uoa-utils.c:84 #: ../modules/ubuntu-online-accounts/uoa-utils.c:281 #, c-format msgid "" "Expected status 200 when requesting your identity, instead got status %d (%s)" msgstr "" "Očekivano stanje 200 kada se zahtijeva vaš identitet, umjesto dobivenog " "stanja %d (%s)" #: ../modules/ubuntu-online-accounts/uoa-utils.c:101 #: ../modules/ubuntu-online-accounts/uoa-utils.c:298 msgid "Error parsing response as JSON: " msgstr "" #: ../modules/ubuntu-online-accounts/uoa-utils.c:119 msgid "Didn't find 'email' in JSON data" msgstr "" #: ../modules/ubuntu-online-accounts/uoa-utils.c:316 msgid "Didn't find 'id' in JSON data" msgstr "" #: ../modules/ubuntu-online-accounts/uoa-utils.c:321 msgid "Didn't find 'emails.account' in JSON data" msgstr "" #: ../modules/ubuntu-online-accounts/windows-live-mail.service.in.in.h:1 msgid "Windows Live Mail" msgstr "" #: ../modules/ubuntu-online-accounts/yahoo-calendar.service.in.in.h:1 msgid "Yahoo! Calendar" msgstr "" #: ../modules/ubuntu-online-accounts/yahoo-mail.service.in.in.h:1 msgid "Yahoo! Mail" msgstr "" #: ../services/evolution-addressbook-factory/evolution-addressbook-factory.c:36 #: ../services/evolution-calendar-factory/evolution-calendar-factory.c:38 #: ../services/evolution-user-prompter/evolution-user-prompter.c:32 msgid "Keep running after the last client is closed" msgstr "" #: ../services/evolution-addressbook-factory/evolution-addressbook-factory.c:38 #: ../services/evolution-calendar-factory/evolution-calendar-factory.c:40 msgid "Wait running until at least one client is connected" msgstr "" #: ../services/evolution-source-registry/builtin/birthdays.source.in.h:1 msgid "Birthdays & Anniversaries" msgstr "" #: ../services/evolution-source-registry/builtin/caldav-stub.source.in.h:1 msgid "CalDAV" msgstr "" #: ../services/evolution-source-registry/builtin/google-stub.source.in.h:1 msgid "Google" msgstr "Google" #: ../services/evolution-source-registry/builtin/ldap-stub.source.in.h:1 msgid "On LDAP Servers" msgstr "" #: ../services/evolution-source-registry/builtin/local.source.in.h:1 #: ../services/evolution-source-registry/builtin/local-stub.source.in.h:1 msgid "On This Computer" msgstr "Na ovom računalu" #: ../services/evolution-source-registry/builtin/vfolder.source.in.h:1 msgid "Search Folders" msgstr "" #: ../services/evolution-source-registry/builtin/weather-stub.source.in.h:1 msgid "Weather" msgstr "" #: ../services/evolution-source-registry/builtin/webcal-stub.source.in.h:1 msgid "On The Web" msgstr "" #: ../services/evolution-source-registry/builtin/webdav-stub.source.in.h:1 msgid "WebDAV" msgstr "" #: ../services/evolution-source-registry/evolution-source-registry.c:39 msgid "Don't migrate user data from previous versions of Evolution" msgstr "" #: ../services/evolution-user-prompter/prompt-user-gtk.c:121 msgid "_Dismiss" msgstr "" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/nautilus-sendto.po0000644000000000000000000000356412704126312021700 0ustar # Croatian translation for nautilus-sendto # Copyright (c) (c) 2006 Canonical Ltd, and Rosetta Contributors 2006 # This file is distributed under the same license as the nautilus-sendto package. # FIRST AUTHOR , 2006. # msgid "" msgstr "" "Project-Id-Version: nautilus-sendto\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2015-12-03 23:48+0000\n" "PO-Revision-Date: 2015-02-23 13:38+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 06:26+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../src/nautilus-sendto.c:53 msgid "Run from build directory (ignored)" msgstr "Pokreni iz direktorija izgradnje (zanemareno)" #: ../src/nautilus-sendto.c:54 msgid "Use XID as parent to the send dialogue (ignored)" msgstr "Koristi XID kao nadređeni proces za slanje dijaloga (zanemareno)" #: ../src/nautilus-sendto.c:55 msgid "Files to send" msgstr "Datoteke za slanje" #: ../src/nautilus-sendto.c:56 msgid "Output version information and exit" msgstr "Prikaži informacije inačice i izađi" #. Translators: the default archive name if it #. * could not be deduced from the provided files #: ../src/nautilus-sendto.c:244 msgid "Archive" msgstr "Arhiva" #: ../src/nautilus-sendto.c:511 #, c-format msgid "Could not parse command-line options: %s\n" msgstr "Obrada mogućnosti naredbenog retka nije moguća: %s\n" #: ../src/nautilus-sendto.c:524 #, c-format msgid "No mail client installed, not sending files\n" msgstr "Klijent za slanje pošte nije instaliran, ne šaljem datoteke\n" #: ../src/nautilus-sendto.c:530 #, c-format msgid "Expects URIs or filenames to be passed as options\n" msgstr "" "Očekuje URI-je ili nazive datoteka koji će se proslijediti kao mogućnosti\n" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/deja-dup.po0000644000000000000000000015741412704126312020237 0ustar # Croatian translation for deja-dup # Copyright (c) 2014 Rosetta Contributors and Canonical Ltd 2014 # This file is distributed under the same license as the deja-dup package. # FIRST AUTHOR , 2014. # msgid "" msgstr "" "Project-Id-Version: deja-dup\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-04-07 19:48+0000\n" "PO-Revision-Date: 2016-04-09 18:08+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 07:30+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:1 #: ../deja-dup/preferences/Preferences.vala:286 msgid "Folders to save" msgstr "Mape uključene u sigurnosno kopiranje" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:2 msgid "" "This list of directories will be backed up. Reserved values $HOME, $DESKTOP, " "$DOCUMENTS, $DOWNLOAD, $MUSIC, $PICTURES, $PUBLIC_SHARE, $TEMPLATES, $TRASH, " "and $VIDEO are recognized as the user’s special directories. Relative " "entries are relative to the user’s home directory." msgstr "" "Ovaj popis mapa će biti sigurnosno kopiran. Rezervirane vrijednosti $HOME, " "$DESKTOP, $DOCUMENTS, $DOWNLOAD, $MUSIC, $PICTURES, $PUBLIC_SHARE, " "$TEMPLATES, $TRASH, i $VIDEO su prepoznate kao korisnikove posebne mape. " "Srodne stavke su slične korisnikovoj osobnoj mapi." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:3 #: ../deja-dup/preferences/Preferences.vala:297 msgid "Folders to ignore" msgstr "Mape isključene iz sigurnosnog kopiranja" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:4 msgid "" "This list of directories will not be backed up. Reserved values $HOME, " "$DESKTOP, $DOCUMENTS, $DOWNLOAD, $MUSIC, $PICTURES, $PUBLIC_SHARE, " "$TEMPLATES, $TRASH, and $VIDEO are recognized as the user’s special " "directories. Relative entries are relative to the user’s home directory." msgstr "" "Ovaj popis mapa će biti sigurnosno kopiran. Rezervirane vrijednosti $HOME, " "$DESKTOP, $DOCUMENTS, $DOWNLOAD, $MUSIC, $PICTURES, $PUBLIC_SHARE, " "$TEMPLATES, $TRASH, i $VIDEO su prepoznate kao korisnikove posebne mape. " "Srodne stavke su slične korisnikovoj osobnoj mapi." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:5 msgid "Whether to request the root password" msgstr "Bilo za zahtjev korijenske lozinke" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:6 msgid "" "Whether to request the root password when backing up from or restoring to " "system folders." msgstr "" "Treba li zahtijevati korijensku lozinku kada sigurnosno kopirate ili vraćate " "sigurnosnu kopiju u mape sustava" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:7 msgid "The last time Déjà Dup was run" msgstr "Posljednji puta kada je Déjà Dup bio pokrenut." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:8 msgid "" "The last time Déjà Dup was successfully run. This time should be in ISO 8601 " "format." msgstr "" "Posljednji puta kada je Déjà Dup bio uspješno pokrenut. Ovaj puta bi trebao " "biti u ISO 8601 formatu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:9 msgid "The last time Déjà Dup backed up" msgstr "Posljednji puta kada je Déjà Dup izradio sigurnosnu kopiju" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:10 msgid "" "The last time Déjà Dup successfully completed a backup. This time should be " "in ISO 8601 format." msgstr "" "Posljednji puta kada je Déjà Dup uspješno izradio sigurnosnu kopiju. Ovaj " "puta bi trebao biti u ISO 8601 formatu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:11 msgid "The last time Déjà Dup restored" msgstr "Posljednji puta kada je Déjà Dup vratio sigurnosnu kopiju" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:12 msgid "" "The last time Déjà Dup successfully completed a restore. This time should be " "in ISO 8601 format." msgstr "" "Posljednji puta kada je Déjà Dup uspješno vratio sigurnosnu kopiju. Ovaj " "puta bi trebao biti u ISO 8601 formatu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:13 msgid "Whether to periodically back up" msgstr "Bilo za povremeno sigurnosno kopiranje" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:14 msgid "Whether to automatically back up on a regular schedule." msgstr "Bilo da automatsko sigurnosno kopiranje na redovitom rasporedu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:15 msgid "How often to periodically back up" msgstr "Koliko često želite da se povremeno sigurnosno kopira" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:16 msgid "The number of days between backups." msgstr "Broj dana između izrada sigurnosnih kopija." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:17 msgid "" "The last time Déjà Dup checked whether it should prompt about backing up" msgstr "" "Posljednji puta Déjà Dup je provjerio treba li upitati za sigurnosno " "kopiranje" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:18 msgid "" "When a user logs in, the Déjà Dup monitor checks whether it should prompt " "about backing up. This is used to increase discoverability for users that " "don’t know about backups. This time should be either ‘disabled’ to turn off " "this check or in ISO 8601 format." msgstr "" "Kada se korisnik prijavi, Déjà Dup nadziratelj provjerava treba li upozoriti " "o stvaranju sigurnosne kopije. To se koristi za povećanje mogućnosti " "korisnika koji nisu upoznati sa sigurnosnim kopiranjem. Ovaj put trebali " "biste ili \"onemogući\" da isključite ovu provjeru ili u ISO-8601 formatu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:19 msgid "" "The last time Déjà Dup checked whether it should prompt about your password" msgstr "" "Posljednji puta Déjà Dup je provjerio treba li upitati za vašu louinku" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:20 msgid "" "In order to prevent you from forgetting your passwords, Déjà Dup will " "occasionally notify you to confirm the password. This time should be either " "‘disabled’ to turn off this check or in ISO 8601 format." msgstr "" "Kako bi vas spriječio da zaboravite svoju lozinku, Déjà Dup će vas povremeno " "obavještavati da potvrdite svoju lozinku. Ovog puta bi trebalo biti " "‘onemogućeno’ za isključivanje ove provjere ili u ISO 8601 formatu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:21 msgid "How long to keep backup files" msgstr "Koliko dugo želite čuvati sigurnosne kopije datoteka" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:22 msgid "" "The number of days to keep backup files on the backup location. A value of 0 " "means forever. This is a minimum number of days; the files may be kept " "longer." msgstr "" "Broj dana za čuvanje sigurnosnih kopija datoteka na lokaciji sigurnosnih " "kopija. Vrijednost 0 znači zauvijek. To je najmanji broj dana; datoteke se " "mogu držati duže." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:23 msgid "How long to wait between full backups" msgstr "Koliko dugo treba čekati između potpunih sigurnosnih kopiranja" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:24 msgid "" "Déjà Dup needs to occasionally make fresh full backups. This is the number " "of days to wait between full backups." msgstr "" "Déjà Dup mora povremeno osvježiti potpune sigurnosne kopije. Ovo je broj " "dana čekanja između potpunih kopiranja." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:25 msgid "Type of location to store backup" msgstr "Vrsta lokacije za spremanje sigurnosne kopije" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:26 msgid "" "The type of backup location. If ‘auto’, a default will be chosen based on " "what is available." msgstr "" "Vrsta lokacije sigurnosne kopije. Ako je ‘auto’, zadano će biti odabrano na " "temelju onoga što je dostupno." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:27 msgid "Amazon S3 Access Key ID" msgstr "Amazon S3 ID pristupni ključ" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:28 msgid "Your Amazon S3 Access Key Identifier. This acts as your S3 username." msgstr "" "Vaš Amazon S3 identifikacijski pristupni ključ. Ovo važi kao vaše S3 " "korisničko ime." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:29 msgid "The Amazon S3 bucket name to use" msgstr "Naziv Amazon S3 spremnika za korištenje" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:30 msgid "" "Which Amazon S3 bucket to store files in. This does not need to exist " "already. Only legal hostname strings are valid." msgstr "" "U koji Amazon S3 spremnik da pohranim datoteke. To ne treba već postojati. " "Samo legalni hostname nizovi su valjani." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:31 msgid "The Amazon S3 folder" msgstr "Amazon S3 mapa" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:32 msgid "" "An optional folder name to store files in. This folder will be created in " "the chosen bucket." msgstr "" "Dodatni naziv mape za spremanje datoteka. Ova mapa će biti izrađena u " "odabranom spremniku" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:33 msgid "Google Cloud Storage Access Key ID" msgstr "ID pristupnog ključa Google Cloud pohrane" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:34 msgid "" "Your Google Cloud Storage Access Key Identifier. This acts as your Google " "Cloud Storage username." msgstr "" "Vaš identifikator pristupnog ključa Google Cloud pohrane. Koristi se kao " "vaše korisničko ime Google Cloud pohrane." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:35 msgid "The Google Cloud Storage bucket name to use" msgstr "Naziv za korištenje buketa Google Cloud pohrane" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:36 msgid "" "Which Google Cloud Storage bucket to store files in. This does not need to " "exist already. Only legal hostname strings are valid." msgstr "" "U koji će se buket Google Cloud pohrane spremati datoteke. Ovo nije potrebno " "ako već postoji. Samo znakovi stvarnih naziva računala su valjani." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:37 msgid "The Google Cloud Storage folder" msgstr "Mapa Google Cloud pohrane" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:38 msgid "The email-address of your Google account" msgstr "Adresa e-pošte vašeg Google računa" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:39 msgid "The email-address of your Google account." msgstr "Adresa e-pošte vašeg Google računa." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:40 msgid "The folder where backups are stored" msgstr "Mapa spremanja sigurnosnih kopija" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:41 msgid "The folder hierarchy where backups are stored." msgstr "Hijerarhija mape spremanja sigurnosnih kopija." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:42 msgid "The Rackspace Cloud Files container" msgstr "Spremnik datoteka Rackspace oblaka" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:43 msgid "" "Which Rackspace Cloud Files container to store files in. This does not need " "to exist already. Only legal hostname strings are valid." msgstr "" "U koji Rackspace oblak datoteka spremnik da pohranim datoteke. To ne treba " "već postojati. Samo legalni hostname nizovi su valjani." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:44 msgid "Your Rackspace username" msgstr "Vaše Rackspace korisničko ime" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:45 msgid "This is your username for the Rackspace Cloud Files service." msgstr "Ovo je vaše korisničko ime za usluge Rackspace oblak datoteka." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:46 msgid "The OpenStack Swift container" msgstr "OpenStack Swift spremnik" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:47 msgid "" "Which OpenStack Swift container to store files in. This does not need to " "exist already. Only legal hostname strings are valid." msgstr "" "U koji će se OpenStack Swift spremnik spremati datoteke. Ovo nije potrebno " "ako već postoji. Samo znakovi stvarnih naziva računala su valjani." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:48 msgid "Your OpenStack username" msgstr "Vaše OpenStack korisničko ime" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:49 msgid "This is your username for the OpenStack Swift service." msgstr "Ovo je vaše korisničko ime OpenStack Swift usluge." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:50 msgid "Your OpenStack tenant" msgstr "Vaš OpenStack zakupac" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:51 msgid "This is your tenant for the OpenStack Swift service." msgstr "Ovo je vaš zakupac za OpenStack Swift uslugu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:52 msgid "Authentication URL" msgstr "URL ovjere" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:53 msgid "" "This is the Authentication URL, or keystone URL for the OpenStack service" msgstr "Ovo je URL ovjere, ili osnovni URL za OpenStack uslugu" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:54 #: ../deja-dup/AssistantRestore.vala:221 msgid "Backup location" msgstr "Lokacija sigurnosne kopije" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:55 msgid "Location in which to hold the backup files." msgstr "Lokacija u kojem se nalaze sigurnosne kopije datoteka." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:56 msgid "Folder type" msgstr "Tip mape" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:57 msgid "" "Whether the backup location is a mounted external volume or a normal folder." msgstr "" "Ako je lokacija sigurnosne kopije montirana na vanjski uređaj ili normalnu " "mapu." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:58 msgid "Relative path under the external volume" msgstr "Slična putanja prema vanjskom uređaju" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:59 msgid "" "If the backup location is on an external volume, this is the path of the " "folder on that volume." msgstr "" "Ako je lokacija sigurnosne kopije na vanjskom uređaju, ovo je putanja mape " "na tom uređaju." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:60 msgid "Unique ID of the external volume" msgstr "Jedinstveni ID vanjskog uređaja" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:61 msgid "" "If the backup location is on an external volume, this is its unique " "filesystem identifier." msgstr "" "Ako je lokacija sigurnosne kopije na vanjskom uređaju, ovo je njegov " "jedinstveni identifikator datotečnog sustava." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:62 msgid "Full name of the external volume" msgstr "Puni naziv vanjskog uređaja" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:63 msgid "" "If the backup location is on an external volume, this is the volume’s longer " "descriptive name." msgstr "" "Ako je lokacija sigurnosne kopije na vanjskom uređaju, ovo je duži opis " "naziva uređaja." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:64 msgid "Short name of the external volume" msgstr "Skraćeni naziv vanjskog uređaja" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:65 msgid "" "If the backup location is on an external volume, this is the volume’s " "shorter name." msgstr "" "Ako je lokacija sigurnosne kopije na vanjskom uređaju, ovo je kraći naziva " "uređaja." #: ../data/org.gnome.DejaDup.gschema.xml.in.h:66 msgid "Icon of the external volume" msgstr "Ikona vanjskog uređaja" #: ../data/org.gnome.DejaDup.gschema.xml.in.h:67 msgid "" "If the backup location is on an external volume, this is the volume’s icon." msgstr "" "Ako je lokacija sigurnosne kopije na vanjskom uređaju, ovo je ikona uređaja." #. Translators: The name is a play on the French phrase "déjà vu" meaning #. "already seen", but with the "vu" replaced with "dup". "Dup" in this #. context is itself a reference to both the underlying command line tool #. "duplicity" and the act of duplicating data for backup. As a whole, the #. phrase "Déjà Dup" may not be very translatable. #: ../deja-dup/deja-dup.appdata.xml.in.h:1 ../deja-dup/deja-dup.desktop.in.h:2 #: ../deja-dup/main.vala:78 ../libdeja/CommonUtils.vala:138 msgid "Déjà Dup Backup Tool" msgstr "Déjà Dup alat sigurnosnog kopiranja" #: ../deja-dup/deja-dup.appdata.xml.in.h:2 msgid "Keep your important documents safe from disaster" msgstr "Držite vaše važne dokumente sigurnim od katastrofe" #: ../deja-dup/deja-dup.appdata.xml.in.h:3 msgid "" "Déjà Dup is a simple backup tool. It hides the complexity of backing up the " "Right Way (encrypted, off-site, and regular) and uses duplicity as the " "backend." msgstr "" "Déjà Dup je jednostavan alat sigurnosnog kopiranja. Sakriva složenost " "sigurnosnog kopiranja na pravi način (šifrirano, van-mrežno, i redovno) i " "koristi dvostrukost kao pozadinu." #: ../deja-dup/deja-dup.appdata.xml.in.h:4 msgid "" "Support for local, remote, or cloud backup locations, such as Amazon S3 and " "Rackspace Cloud Files" msgstr "" "Podrška za lokalne, udaljene ili u oblaku lokacije sigurnosnog kopiranja, " "poput Amazon S3 i Rackspace Cloud Files" #: ../deja-dup/deja-dup.appdata.xml.in.h:5 msgid "Securely encrypts and compresses your data" msgstr "Pouzdano šifrira i sažima vaše podatke" #: ../deja-dup/deja-dup.appdata.xml.in.h:6 msgid "" "Incrementally backs up, letting you restore from any particular backup" msgstr "" "Postepeno sigurnosno kopira, dopuštajući vam vraćanje iz određene sigurnosne " "kopije" #: ../deja-dup/deja-dup.appdata.xml.in.h:7 msgid "Schedules regular backups" msgstr "Raspored redovite sigurnosne kopije" #: ../deja-dup/deja-dup.appdata.xml.in.h:8 msgid "Integrates well into your GNOME desktop" msgstr "Integrira se dobro u GNOME radno okruženje" #. Translators: "Backups" is a noun #: ../deja-dup/deja-dup.desktop.in.h:1 #: ../deja-dup/preferences/deja-dup-preferences.desktop.in.h:1 #: ../deja-dup/Prompt.vala:93 ../deja-dup/Prompt.vala:128 #: ../deja-dup/StatusIcon.vala:134 ../deja-dup/StatusIcon.vala:233 #: ../deja-dup/monitor/monitor.vala:115 #: ../deja-dup/preferences/preferences-main.vala:42 #: ../deja-dup/preferences/preferences-main.vala:121 msgid "Backups" msgstr "Sigurnosno kopiranje" #. Translators: Monitor in this sense means something akin to 'watcher', not #. a computer screen. This program acts like a daemon that kicks off #. backups at scheduled times. #: ../deja-dup/monitor/deja-dup-monitor.desktop.in.h:1 #: ../deja-dup/monitor/monitor.vala:315 msgid "Backup Monitor" msgstr "Nadzor sigurnosne kopije" #: ../deja-dup/monitor/deja-dup-monitor.desktop.in.h:2 msgid "Schedules backups at regular intervals" msgstr "Rasporedi sigurnosne kopije u redovitim razmacima" #: ../deja-dup/preferences/deja-dup-preferences.desktop.in.h:2 msgid "Change your backup settings" msgstr "Promjenite vaše postavke sigurnosne kopije" #. These keywords are used when searching for applications in dashes, etc. #: ../deja-dup/preferences/deja-dup-preferences.desktop.in.h:4 msgid "déjà;deja;dup;" msgstr "déjà;deja;dup;" #: ../deja-dup/preferences/deja-dup-preferences.desktop.in.h:5 msgid "Back Up" msgstr "Sigurnosno kopiraj" #: ../deja-dup/ui/restore-missing.ui.h:1 msgid "Folder" msgstr "Mapa" #: ../deja-dup/ui/restore-missing.ui.h:2 #: ../deja-dup/AssistantOperation.vala:177 msgid "Scanning…" msgstr "Pretraživanje..." #: ../deja-dup/nautilus/NautilusExtension.c:173 msgid "Restore Missing Files…" msgstr "Vrati datoteke koje nedostaju..." #: ../deja-dup/nautilus/NautilusExtension.c:174 msgid "Restore deleted files from backup" msgstr "Vrati izbrisane datoteke iz sigurnosne kopije" #: ../deja-dup/nautilus/NautilusExtension.c:216 msgid "Revert to Previous Version…" msgid_plural "Revert to Previous Versions…" msgstr[0] "Vrati na prijašnju inčicu..." msgstr[1] "Vrati na prijašnje inčice..." msgstr[2] "Vrati na prijašnje inčice..." #: ../deja-dup/nautilus/NautilusExtension.c:220 msgid "Restore file from backup" msgid_plural "Restore files from backup" msgstr[0] "Vrati datoteku iz sigurnosne kopije" msgstr[1] "Vrati datoteke iz sigurnosne kopije" msgstr[2] "Vrati datoteka iz sigurnosne kopije" #: ../deja-dup/AssistantBackup.vala:31 msgctxt "back up is verb" msgid "Back Up" msgstr "Sigurnosno kopiraj" #: ../deja-dup/AssistantBackup.vala:32 msgctxt "back up is verb" msgid "_Back Up" msgstr "_Sigurnosno kopiraj" #: ../deja-dup/AssistantBackup.vala:49 msgid "Creating the first backup. This may take a while." msgstr "Stvaranje prve sigurnosne kopije. Ovo bi moglo potrajati." #: ../deja-dup/AssistantBackup.vala:50 msgid "" "Creating a fresh backup to protect against backup corruption. This will " "take longer than normal." msgstr "" "Stvaranje svježe sigurnosne kopije radi zaštite protiv oštećenja sigurnosne " "kopije. To će trajati dulje nego normalno." #. Translators: This is the phrase 'Backing up' in the larger phrase #. "Backing up '%s'". %s is a filename. #: ../deja-dup/AssistantBackup.vala:80 msgid "Backing up:" msgstr "Sigurnosno kopirnje:" #: ../deja-dup/AssistantBackup.vala:89 msgid "Backup Failed" msgstr "Sigurnosno kopirnje nije uspjelo" #: ../deja-dup/AssistantBackup.vala:92 msgid "Backup Finished" msgstr "Sigurnosno kopiranje završeno" #. Also leave ourselves up if we just finished a restore test. #: ../deja-dup/AssistantBackup.vala:96 msgid "Your files were successfully backed up and tested." msgstr "Vaše datoteke su uspješno sigurnosno kopirane i testirane." #: ../deja-dup/AssistantBackup.vala:103 msgid "Backing Up…" msgstr "Sigurnosno kopirnje..." #: ../deja-dup/AssistantOperation.vala:176 msgid "Scanning:" msgstr "Pretraživanje:" #: ../deja-dup/AssistantOperation.vala:258 msgid "_Details" msgstr "_Pojedinosti" #: ../deja-dup/AssistantOperation.vala:306 msgid "_Allow restoring without a password" msgstr "_Dopusti vraćanje bez lozinke" #: ../deja-dup/AssistantOperation.vala:312 msgid "_Password-protect your backup" msgstr "_Zaštitite lozinkom svoju sigurnosnu kopiju" #: ../deja-dup/AssistantOperation.vala:324 msgid "" "You will need your password to restore your files. You might want to write " "it down." msgstr "" "Trebat ćete vašu lozinku da bi mogli vratiti svoje datoteke. Možda ju želite " "zapisati." #: ../deja-dup/AssistantOperation.vala:339 #: ../deja-dup/AssistantOperation.vala:408 msgid "E_ncryption password" msgstr "L_ozinka šifriranja" #: ../deja-dup/AssistantOperation.vala:356 msgid "Confir_m password" msgstr "Potvrd_i lozinku" #: ../deja-dup/AssistantOperation.vala:369 #: ../deja-dup/AssistantOperation.vala:417 msgid "_Show password" msgstr "_Prikaži lozinku" #: ../deja-dup/AssistantOperation.vala:376 #: ../deja-dup/MountOperationAssistant.vala:40 msgid "_Remember password" msgstr "_Zapamti lozinku" #: ../deja-dup/AssistantOperation.vala:395 msgid "" "In order to check that you will be able to retrieve your files in the case " "of an emergency, please enter your encryption password again to perform a " "brief restore test." msgstr "" "Za provjeru mogućnosti primanja svojih datoteka u hitnom slučaju, upišite " "ponovno svoju šifriranu lozinku za izvođenje kratkog testa vraćanja." #: ../deja-dup/AssistantOperation.vala:422 msgid "Test every two _months" msgstr "Testiraj svaka dva _mjeseca" #: ../deja-dup/AssistantOperation.vala:496 msgid "Summary" msgstr "Kratak pregled" #: ../deja-dup/AssistantOperation.vala:518 msgid "Restore Test" msgstr "Test vraćanja" #. For most, don't do anything special. Show generic 'unknown error' #. message, but provide the exception text for better bug reports. #. Plus, sometimes it may clue the user in to what's wrong. #. But first, try to restart without a cache, since that seems to quite #. frequently fix odd metadata errors with duplicity. If we hit an error #. a second time, we'll show the unknown error message. #: ../deja-dup/AssistantOperation.vala:594 #: ../libdeja/tools/duplicity/DuplicityJob.vala:696 #: ../libdeja/tools/duplicity/DuplicityJob.vala:1075 msgid "Failed with an unknown error." msgstr "Neuspješno sa nepoznatom pogreškom." #: ../deja-dup/AssistantOperation.vala:791 msgid "Require Password?" msgstr "Zahtijeva lozinku?" #: ../deja-dup/AssistantOperation.vala:793 msgid "Encryption Password Needed" msgstr "Potrebna je lozinka šifriranja" #: ../deja-dup/AssistantOperation.vala:865 msgid "Backup encryption password" msgstr "Lozinka šifriranja sigurnosne kopije" #: ../deja-dup/AssistantRestore.vala:68 msgid "Restore" msgstr "Vrati" #: ../deja-dup/AssistantRestore.vala:69 msgid "_Restore" msgstr "_Vrati" #: ../deja-dup/AssistantRestore.vala:91 msgid "_Backup location" msgstr "_Lokacija sigurnosne kopije" #: ../deja-dup/AssistantRestore.vala:124 msgid "Restore From Where?" msgstr "Vrati odakle?" #: ../deja-dup/AssistantRestore.vala:146 msgid "_Date" msgstr "_Datum" #: ../deja-dup/AssistantRestore.vala:169 msgid "Restore files to _original locations" msgstr "Vraćanje datoteka na _izvorne lokacije" #: ../deja-dup/AssistantRestore.vala:174 msgid "Restore to _specific folder" msgstr "Vraćanje u _određenu mapu" #: ../deja-dup/AssistantRestore.vala:184 msgid "Choose destination for restored files" msgstr "Odaberite odredište za vraćene datoteke" #: ../deja-dup/AssistantRestore.vala:188 msgid "Restore _folder" msgstr "Mapa _vraćanja" #: ../deja-dup/AssistantRestore.vala:229 msgid "Restore date" msgstr "Datum vraćanja" #: ../deja-dup/AssistantRestore.vala:237 msgid "Restore folder" msgstr "Mapa vraćanja" #: ../deja-dup/AssistantRestore.vala:263 msgid "Checking for Backups…" msgstr "Provjera sigurnosnih kopija..." #: ../deja-dup/AssistantRestore.vala:271 msgid "Restore From When?" msgstr "Vrati od kada?" #: ../deja-dup/AssistantRestore.vala:279 msgid "Restore to Where?" msgstr "Vrati gdje?" #. Translators: This is the word 'Restoring' in the phrase #. "Restoring '%s'". %s is a filename. #: ../deja-dup/AssistantRestore.vala:306 msgid "Restoring:" msgstr "Vraćanje:" #. Translators: %x is the current date, %X is the current time. #. This will be in a list with other strings that just have %x (the #. current date). So make sure if you change this, it still makes #. sense in that context. #: ../deja-dup/AssistantRestore.vala:348 #, c-format msgid "%x %X" msgstr "%x %X" #. If we didn't see any dates... Must not be any backups on the backend #: ../deja-dup/AssistantRestore.vala:361 msgid "No backups to restore" msgstr "Nema sigurnosnih kopija za vraćanje" #: ../deja-dup/AssistantRestore.vala:437 msgid "Original location" msgstr "Izvorna lokacija" #: ../deja-dup/AssistantRestore.vala:448 msgid "File to restore" msgid_plural "Files to restore" msgstr[0] "Datoteka za vraćanje" msgstr[1] "Datoteke za vraćanje" msgstr[2] "Datoteka za vraćanje" #: ../deja-dup/AssistantRestore.vala:469 msgid "Restore Failed" msgstr "Vraćanje nije uspjelo" #: ../deja-dup/AssistantRestore.vala:471 msgid "Restore Finished" msgstr "Vraćanje završeno" #. if it *is* visible, a header will be set already #: ../deja-dup/AssistantRestore.vala:474 msgid "Your files were successfully restored." msgstr "Vaše datoteke su uspješno vraćene." #: ../deja-dup/AssistantRestore.vala:477 msgid "Your file was successfully restored." msgid_plural "Your files were successfully restored." msgstr[0] "Vaša datoteka je uspješno vraćena." msgstr[1] "Vaše datoteke su uspješno vraćene." msgstr[2] "Vaših datoteka je uspješno vraćeno." #: ../deja-dup/AssistantRestore.vala:484 ../libdeja/Operation.vala:63 msgid "Restoring…" msgstr "Vraćanje..." #: ../deja-dup/AssistantRestoreMissing.vala:199 msgid "File" msgstr "Datoteka" #: ../deja-dup/AssistantRestoreMissing.vala:200 msgid "Last seen" msgstr "Zadnji put viđen" #: ../deja-dup/AssistantRestoreMissing.vala:215 msgid "Restore which Files?" msgstr "Vrati koje datoteke?" #. Hours #: ../deja-dup/AssistantRestoreMissing.vala:346 msgid "Scanning for files from up to a day ago…" msgstr "Pretraživanje datoteka do prije jednog dana..." #: ../deja-dup/AssistantRestoreMissing.vala:349 msgid "Scanning for files from up to a week ago…" msgstr "Pretraživanje datoteka do prije tjedan dana..." #: ../deja-dup/AssistantRestoreMissing.vala:352 msgid "Scanning for files from up to a month ago…" msgstr "Pretraživanje datoteka do prije mjesec dana..." #: ../deja-dup/AssistantRestoreMissing.vala:357 #, c-format msgid "Scanning for files from about a month ago…" msgid_plural "Scanning for files from about %d months ago…" msgstr[0] "Pretraživanje datoteka otprilike od mjesec dana..." msgstr[1] "Pretraživanje datoteka otprilike od %d mjeseca..." msgstr[2] "Pretraživanje datoteka otprilike od %d mjeseci..." #: ../deja-dup/AssistantRestoreMissing.vala:364 #, c-format msgid "Scanning for files from about a year ago…" msgid_plural "Scanning for files from about %d years ago…" msgstr[0] "Pretraživanje datoteka otprilike od prije godinu dana..." msgstr[1] "Pretraživanje datoteka otprilike od prije %d godine..." msgstr[2] "Pretraživanje datoteka otprilike od prije %d godina..." #: ../deja-dup/AssistantRestoreMissing.vala:454 msgid "Scanning finished" msgstr "Pretraživanje završeno" #: ../deja-dup/Assistant.vala:38 ../deja-dup/widgets/ConfigLocationFile.vala:54 msgid "_OK" msgstr "_U redu" #: ../deja-dup/Assistant.vala:299 msgid "_Forward" msgstr "_Naprijed" #: ../deja-dup/Assistant.vala:317 msgid "Co_ntinue" msgstr "Na_stavi" #: ../deja-dup/Assistant.vala:323 msgctxt "verb" msgid "_Test" msgstr "_Test" #: ../deja-dup/Assistant.vala:352 ../deja-dup/widgets/ConfigList.vala:255 #: ../deja-dup/widgets/ConfigLocationFile.vala:53 msgid "_Cancel" msgstr "_Odustani" #: ../deja-dup/Assistant.vala:354 msgid "_Close" msgstr "_Zatvori" #: ../deja-dup/Assistant.vala:358 msgid "_Back" msgstr "_Natrag" #: ../deja-dup/Assistant.vala:360 ../deja-dup/StatusIcon.vala:93 msgid "_Resume Later" msgstr "_Nastavi kasnije" #: ../deja-dup/main.vala:34 ../deja-dup/monitor/monitor.vala:36 #: ../deja-dup/preferences/preferences-main.vala:85 msgid "Show version" msgstr "Prikaži inačicu" #: ../deja-dup/main.vala:35 msgid "Restore given files" msgstr "Vrati zadane datoteke" #: ../deja-dup/main.vala:36 msgid "Immediately start a backup" msgstr "Odmah započni sigurnosno kopiranje" #: ../deja-dup/main.vala:38 msgid "Restore deleted files" msgstr "Vrati izbrisane datoteke" #: ../deja-dup/main.vala:55 msgid "No directory provided" msgstr "Nema uvjetovane mape" #: ../deja-dup/main.vala:60 msgid "Only one directory can be shown at once" msgstr "Samo jedna mapa može biti prikazana odjednom" #: ../deja-dup/main.vala:81 msgid "[FILES…]" msgstr "[DATOTEKE...]" #: ../deja-dup/main.vala:82 msgid "DIRECTORY" msgstr "MAPA" #. Translators: Wrap this to 80 characters per line if you can, as I have for English #: ../deja-dup/main.vala:86 msgid "" "Déjà Dup is a simple backup tool. It hides the complexity of backing up\n" "the Right Way (encrypted, off-site, and regular) and uses duplicity as\n" "the backend." msgstr "" "Déjà Dup je jednostavan alat za sigurnosno kopiranje. Skriva složenost " "sigurnosnih kopija\n" "na pravi način (šifrirane, off-site, i redovito) i koriste kao dvostrukost\n" "pozadinu." #: ../deja-dup/main.vala:137 msgid "Directory does not exist" msgstr "Direktorij ne postoji" #: ../deja-dup/main.vala:141 msgid "You must provide a directory, not a file" msgstr "Morate osigurati mapu a ne datoteku" #: ../deja-dup/main.vala:153 msgid "You must specify a mode" msgstr "Morate odrediti način" #: ../deja-dup/MountOperationAssistant.vala:36 msgid "Connect to Server" msgstr "Poveži se s poslužiteljem" #: ../deja-dup/MountOperationAssistant.vala:37 #: ../deja-dup/widgets/ConfigLocationDAV.vala:49 #: ../deja-dup/widgets/ConfigLocationFTP.vala:45 #: ../deja-dup/widgets/ConfigLocationRackspace.vala:31 #: ../deja-dup/widgets/ConfigLocationSMB.vala:37 #: ../deja-dup/widgets/ConfigLocationSSH.vala:40 msgid "_Username" msgstr "_Korisničko ime" #: ../deja-dup/MountOperationAssistant.vala:38 #: ../libdeja/BackendGDrive.vala:160 msgid "_Password" msgstr "_Lozinka" #: ../deja-dup/MountOperationAssistant.vala:39 msgid "S_how password" msgstr "P_rikaži lozinku" #: ../deja-dup/MountOperationAssistant.vala:80 msgid "Location not available" msgstr "Lokacija nije dostupna" #: ../deja-dup/MountOperationAssistant.vala:166 msgid "Connect _anonymously" msgstr "Poveži se _anonimno" #: ../deja-dup/MountOperationAssistant.vala:170 msgid "Connect as u_ser" msgstr "Poveži se kao k_orisnik" #. Translators: this is a Windows networking domain #: ../deja-dup/MountOperationAssistant.vala:213 msgid "_Domain" msgstr "_Domena" #: ../deja-dup/Prompt.vala:37 msgid "Keep your files safe by backing up regularly" msgstr "Držite vaše datoteke sigurnima redovitim sigurnosnim kopiranjem!" #: ../deja-dup/Prompt.vala:42 msgid "" "Important documents, data, and settings can be protected by storing them in " "a backup. In the case of a disaster, you would be able to recover them from " "that backup." msgstr "" "Važni dokumenti, podaci i postavke mogu se zaštititi pohranom u sigurnosnu " "kopiju. U slučaju katastrofe, moći ćete ih vratiti iz te sigurnosne kopije." #: ../deja-dup/Prompt.vala:48 msgid "_Don't Show Again" msgstr "_Ne prikazuj ponovno" #: ../deja-dup/Prompt.vala:50 msgid "Don't Show Again" msgstr "Ne prikazuj ponovno" #: ../deja-dup/Prompt.vala:56 msgid "_Open Backup Settings" msgstr "_Otvori postavke sigurnosnog kopiranja" #: ../deja-dup/Prompt.vala:58 msgid "Open Backup Settings" msgstr "Otvori postavke sigurnosnog kopiranja" #: ../deja-dup/StatusIcon.vala:94 msgid "_Skip Backup" msgstr "_Preskoči sigurnosno kopiranje" #: ../deja-dup/StatusIcon.vala:125 msgid "Backup completed" msgstr "Sigurnosno kopiranje završeno" #: ../deja-dup/StatusIcon.vala:129 msgid "Backup finished" msgstr "Sigurnosno kopiranje završeno" #: ../deja-dup/StatusIcon.vala:130 msgid "" "Not all files were successfully backed up. See dialog for more details." msgstr "" "Nisu sve datoteke uspješno sigurnosno kopirane. Pogledajte dijalog za više " "pojedinosti." #: ../deja-dup/StatusIcon.vala:234 msgid "Starting scheduled backup" msgstr "Pokretanje planiranog sigurnosnog kopiranja" #: ../deja-dup/StatusIcon.vala:237 msgid "Show Progress" msgstr "Prikaži napredak" #: ../deja-dup/StatusIcon.vala:275 #, c-format msgid "%.1f%% complete" msgstr "%.1f%% dovršeno" #: ../deja-dup/StatusIcon.vala:288 msgid "Show _Progress" msgstr "Prikaži _napredak" #: ../deja-dup/monitor/monitor.vala:161 msgid "Scheduled backup delayed" msgstr "Planirano sigurnosno kopiranje odgođeno" #: ../deja-dup/preferences/Preferences.vala:91 #: ../deja-dup/preferences/Preferences.vala:243 msgid "_Back Up Now…" msgstr "_Sigurnosno kopiraj odmah..." #: ../deja-dup/preferences/Preferences.vala:93 #: ../deja-dup/preferences/Preferences.vala:197 msgid "_Restore…" msgstr "_Vrati..." #: ../deja-dup/preferences/Preferences.vala:110 msgid "Could not install" msgstr "Nemoguća instalacija" #: ../deja-dup/preferences/Preferences.vala:144 msgid "Categories" msgstr "Kategorije" #: ../deja-dup/preferences/Preferences.vala:197 msgid "_Install…" msgstr "_Instaliraj…" #: ../deja-dup/preferences/Preferences.vala:243 #: ../deja-dup/widgets/ConfigLabelDescription.vala:59 #: ../deja-dup/widgets/ConfigLabelDescription.vala:81 msgid "Install…" msgstr "Instaliraj…" #: ../deja-dup/preferences/Preferences.vala:275 msgid "Overview" msgstr "Pregled sigurnosnog kopiranja" #: ../deja-dup/preferences/Preferences.vala:308 msgid "_Storage location" msgstr "_Lokacija pohrane" #. Translators: storage as in "where to store the backup" #: ../deja-dup/preferences/Preferences.vala:325 msgid "Storage location" msgstr "Lokacija pohrane sigurnosne kopije" #: ../deja-dup/preferences/Preferences.vala:349 msgid "_Automatic backup" msgstr "_Automatsko sigurnosno kopiranje" #. translators: as in "Every day" #: ../deja-dup/preferences/Preferences.vala:361 msgid "_Every" msgstr "_Svaki" #: ../deja-dup/preferences/Preferences.vala:371 msgctxt "verb" msgid "_Keep" msgstr "_Zadrži" #: ../deja-dup/preferences/Preferences.vala:378 msgid "" "Old backups will be deleted earlier if the storage location is low on space." msgstr "" "Stare sigurnosne kopije će biti ranije obrisane ako ponestaje slobodnog " "prostora na lokaciji pohrane." #: ../deja-dup/preferences/Preferences.vala:388 msgid "Scheduling" msgstr "Raspored sigurnosnog kopiranja" #: ../deja-dup/preferences/preferences-main.vala:71 msgid "_Help" msgstr "_Pomoć" #: ../deja-dup/preferences/preferences-main.vala:73 msgid "_Quit" msgstr "_Zatvori" #: ../deja-dup/widgets/ConfigDelete.vala:40 msgid "At least six months" msgstr "Barem šest mjeseca" #: ../deja-dup/widgets/ConfigDelete.vala:41 msgid "At least a year" msgstr "Barem godinu dana" #: ../deja-dup/widgets/ConfigDelete.vala:42 msgid "Forever" msgstr "Zauvijek" #: ../deja-dup/widgets/ConfigDelete.vala:89 #, c-format msgid "At least %d day" msgid_plural "At least %d days" msgstr[0] "Barem %d dan" msgstr[1] "Barem %d dana" msgstr[2] "Barem %d dana" #. Check for some really simple/common friendly names #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:66 msgid "Next backup is today." msgstr "Sljedeće sigurnosno kopiranje je danas." #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:68 msgid "Next backup is tomorrow." msgstr "Sljedeće sigurnosno kopiranje je sutra." #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:76 #, c-format msgid "Next backup is %d day from now." msgid_plural "Next backup is %d days from now." msgstr[0] "Sljedeće sigurnosno kopiranje je za %d dan od sada." msgstr[1] "Sljedeće sigurnosno kopiranje je za %d dana od sada." msgstr[2] "Sljedeće sigurnosno kopiranje je za %d dana od sada." #. Check for some really simple/common friendly names #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:93 msgid "Last backup was today." msgstr "Posljednje kopiranje je bilo danas." #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:95 msgid "Last backup was yesterday." msgstr "Posljednje kopiranje je bilo jučer." #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:103 #, c-format msgid "Last backup was %d day ago." msgid_plural "Last backup was %d days ago." msgstr[0] "Posljednje kopiranje je bilo prije %d dana." msgstr[1] "Posljednje kopiranje je bilo prije %d dana." msgstr[2] "Posljednje kopiranje je bilo prije %d dana." #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:113 msgid "No recent backups." msgstr "Nema nedavnih sigurnosnih kopiranja." #: ../deja-dup/widgets/ConfigLabelBackupDate.vala:122 msgid "No backup scheduled." msgstr "Nema zakazanih sigurnosnih kopiranja." #: ../deja-dup/widgets/ConfigLabelDescription.vala:60 #, c-format msgid "" "You can restore existing backups after you first install some necessary " "software by clicking the %s button." msgstr "" "Možete obnoviti postojeće sigurnosne kopije nakon što najprije instalirate " "određeni softver klikom na %s tipku." #. This here encodes a lot of outside GUI information in this widget, #. but it's a very special case thing. #: ../deja-dup/widgets/ConfigLabelDescription.vala:69 msgid "Restore…" msgstr "Vrati..." #: ../deja-dup/widgets/ConfigLabelDescription.vala:71 #, c-format msgid "You may use the %s button to browse for existing backups." msgstr "Možete koristiti %s tipku za pregled postojećih sigurnosnih kopija." #. Translators: Files is the user-visible name of nautilus in your language #: ../deja-dup/widgets/ConfigLabelDescription.vala:74 #, c-format msgid "" "You can restore the entire backup with the %s button or use Files to either " "revert individual files or restore missing ones." msgstr "" "Možete vratiti cijelu sigurnosnu kopiju s %s tipkom ili koristiti " "upravitelja datotekama za vraćanje pojedinih ili nedostajućih datoteka." #: ../deja-dup/widgets/ConfigLabelDescription.vala:82 #, c-format msgid "" "You can create a backup after you first install some necessary software by " "clicking the %s button." msgstr "" "Možete stvoriti postojeće sigurnosne kopije nakon što najprije instalirate " "određeni softver klikom na %s tipku." #: ../deja-dup/widgets/ConfigLabelDescription.vala:88 msgid "Back Up Now…" msgstr "Sigurnosno kopiraj odmah..." #: ../deja-dup/widgets/ConfigLabelDescription.vala:89 #, c-format msgid "" "You should enable automatic backups or use the %s button to " "start one now." msgstr "" "Trebali bi omogućiti automatsko sigurnosno kopiranje ili " "koristiti %s tipku za pokretanje trenutnog sigurnosnog kopiranja." #: ../deja-dup/widgets/ConfigLabelDescription.vala:95 msgid "A backup automatically starts every day." msgstr "Sigurnosno kopiranje automatski počinje svakog dana." #: ../deja-dup/widgets/ConfigLabelDescription.vala:97 msgid "A backup automatically starts every week." msgstr "Sigurnosno kopiranje automatski počinje svakog tjedna." #: ../deja-dup/widgets/ConfigLabelDescription.vala:100 #, c-format msgid "A backup automatically starts every %d day." msgid_plural "A backup automatically starts every %d days." msgstr[0] "Sigurnosno kopiranje automatski počinje svakog dana." msgstr[1] "Sigurnosno kopiranje automatski počinje svaka %d dana." msgstr[2] "Sigurnosno kopiranje automatski počinje svakih %d dana." #: ../deja-dup/widgets/ConfigList.vala:178 #: ../deja-dup/widgets/ConfigList.vala:256 msgid "_Add" msgstr "_Dodaj" #: ../deja-dup/widgets/ConfigList.vala:179 msgid "Add" msgstr "Dodaj" #: ../deja-dup/widgets/ConfigList.vala:187 msgid "_Remove" msgstr "_Ukloni" #: ../deja-dup/widgets/ConfigList.vala:188 msgid "Remove" msgstr "Ukloni" #: ../deja-dup/widgets/ConfigList.vala:252 msgid "Choose folders" msgstr "Odaberite mape" #. Now insert remote servers #: ../deja-dup/widgets/ConfigLocation.vala:124 msgid "SSH" msgstr "SSH" #: ../deja-dup/widgets/ConfigLocation.vala:126 msgid "Windows Share" msgstr "Windows dijeljenje" #: ../deja-dup/widgets/ConfigLocation.vala:128 msgid "FTP" msgstr "FTP" #: ../deja-dup/widgets/ConfigLocation.vala:130 msgid "WebDAV" msgstr "WebDAV" #: ../deja-dup/widgets/ConfigLocation.vala:133 msgid "Custom Location" msgstr "Prilagođena lokacija" #. And a local folder option #: ../deja-dup/widgets/ConfigLocation.vala:139 msgid "Local Folder" msgstr "Lokalna mapa" #: ../deja-dup/widgets/ConfigLocation.vala:182 ../libdeja/BackendS3.vala:122 msgid "Amazon S3" msgstr "Amazon S3" #: ../deja-dup/widgets/ConfigLocation.vala:190 msgid "Google Cloud Storage" msgstr "Google Cloud pohrana" #: ../deja-dup/widgets/ConfigLocation.vala:198 msgid "Google Drive" msgstr "Google disk" #: ../deja-dup/widgets/ConfigLocation.vala:210 ../libdeja/BackendU1.vala:45 msgid "Ubuntu One" msgstr "Ubuntu One" #: ../deja-dup/widgets/ConfigLocation.vala:218 #: ../libdeja/BackendRackspace.vala:69 msgid "Rackspace Cloud Files" msgstr "Rackspace oblak datoteke" #: ../deja-dup/widgets/ConfigLocation.vala:226 msgid "OpenStack Swift" msgstr "OpenStack Swift" #: ../deja-dup/widgets/ConfigLocationCustom.vala:34 msgid "_URI" msgstr "_URI" #: ../deja-dup/widgets/ConfigLocationDAV.vala:31 #: ../deja-dup/widgets/ConfigLocationFTP.vala:32 #: ../deja-dup/widgets/ConfigLocationSMB.vala:31 #: ../deja-dup/widgets/ConfigLocationSSH.vala:31 msgid "_Server" msgstr "_Poslužitelj" #: ../deja-dup/widgets/ConfigLocationDAV.vala:38 msgid "Use secure connection (_HTTPS)" msgstr "Koristi sigurno povezivanje (_HTTPS)" #: ../deja-dup/widgets/ConfigLocationDAV.vala:43 #: ../deja-dup/widgets/ConfigLocationFTP.vala:35 #: ../deja-dup/widgets/ConfigLocationSSH.vala:34 msgid "_Port" msgstr "_Ulaz" #: ../deja-dup/widgets/ConfigLocationDAV.vala:46 #: ../deja-dup/widgets/ConfigLocationFTP.vala:38 #: ../deja-dup/widgets/ConfigLocationFile.vala:45 #: ../deja-dup/widgets/ConfigLocationGDrive.vala:33 #: ../deja-dup/widgets/ConfigLocationS3.vala:33 #: ../deja-dup/widgets/ConfigLocationSMB.vala:34 #: ../deja-dup/widgets/ConfigLocationSSH.vala:37 #: ../deja-dup/widgets/ConfigLocationVolume.vala:33 msgid "_Folder" msgstr "_Mapa" #: ../deja-dup/widgets/ConfigLocationFile.vala:39 msgid "_Choose Folder…" msgstr "_Odaberi mapu…" #: ../deja-dup/widgets/ConfigLocationFile.vala:50 msgid "Choose Folder" msgstr "Odaberite mapu" #: ../deja-dup/widgets/ConfigLocationGDrive.vala:31 msgid "_Email address" msgstr "_Adresa e-pošte" #: ../deja-dup/widgets/ConfigLocationRackspace.vala:33 msgid "_Container" msgstr "_Spremnik" #: ../deja-dup/widgets/ConfigLocationS3.vala:31 msgid "S3 Access Key I_D" msgstr "S3 I_D pristupni ključ" #: ../deja-dup/widgets/ConfigLocationSMB.vala:40 msgid "_Domain Name" msgstr "_Nyziv domene" #: ../deja-dup/widgets/ConfigLocationU1.vala:32 ../libdeja/BackendU1.vala:50 msgid "Ubuntu One has shut down. Please choose another storage location." msgstr "Ubuntu One je ukinut. Odaberite neku drugu lokaciju pohrane." #: ../deja-dup/widgets/ConfigPeriod.vala:36 msgid "Day" msgstr "Dan" #: ../deja-dup/widgets/ConfigPeriod.vala:37 msgid "Week" msgstr "Tjedan" #: ../deja-dup/widgets/ConfigPeriod.vala:82 #, c-format msgid "%d day" msgid_plural "%d days" msgstr[0] "%d dan" msgstr[1] "%d dana" msgstr[2] "%d dana" #: ../deja-dup/widgets/WidgetUtils.vala:33 #, c-format msgid "Could not display %s" msgstr "Nije moguće prikazati %s" #. Translators: %2$s is the name of a removable drive, %1$s is a folder #. on that removable drive. #: ../libdeja/BackendFile.vala:135 ../libdeja/CommonUtils.vala:518 #, c-format msgid "%1$s on %2$s" msgstr "%1$s na %2$s" #: ../libdeja/BackendFile.vala:168 #, c-format msgid "Backup will begin when %s becomes connected." msgstr "Sigurnosno kopiranje će početi kada % s postane povezano." #: ../libdeja/BackendFile.vala:175 ../libdeja/BackendGDrive.vala:51 #: ../libdeja/BackendRackspace.vala:49 ../libdeja/BackendS3.vala:59 msgid "Backup will begin when a network connection becomes available." msgstr "" "Sigurnosno kopiranje će početi kada mrežno povezivanje postane dostupno." #: ../libdeja/BackendFile.vala:384 ../libdeja/BackendFile.vala:448 msgid "Backup location not available" msgstr "Lokacija sigurnosne kopije nije dostupna" #: ../libdeja/BackendFile.vala:385 msgid "Waiting for a network connection…" msgstr "Čekam spajanje na mrežu..." #: ../libdeja/BackendFile.vala:448 #, c-format msgid "Waiting for ‘%s’ to become connected…" msgstr "Čekanje '%s' da postane spojeno..." #. Translators: %s is a folder. #: ../libdeja/BackendGDrive.vala:83 #, c-format msgid "%s at Google Drive" msgstr "%s na Google disku" #: ../libdeja/BackendGDrive.vala:126 ../libdeja/BackendRackspace.vala:115 #: ../libdeja/BackendS3.vala:168 msgid "Permission denied" msgstr "Dozvola odbijena" #: ../libdeja/BackendGDrive.vala:157 #, c-format msgid "You can sign up for a Google account online." msgstr "Možete se prijaviti na Google račun na Internetu." #: ../libdeja/BackendGDrive.vala:158 msgid "Connect to Google Drive" msgstr "Poveži se na Google disk" #: ../libdeja/BackendGDrive.vala:159 msgid "_Email" msgstr "_E-pošta" #. Translators: %s is a folder. #: ../libdeja/BackendRackspace.vala:72 #, c-format msgid "%s on Rackspace Cloud Files" msgstr "%s na Rackspace oblak datoteke" #: ../libdeja/BackendRackspace.vala:146 #, c-format msgid "" "You can sign up for a Rackspace Cloud Files account online." msgstr "" "Možete se prijaviti za Rackspace oblak datoteka račun online." #: ../libdeja/BackendRackspace.vala:147 msgid "Connect to Rackspace Cloud Files" msgstr "Spoji se na Rackspace oblak datoteke" #: ../libdeja/BackendRackspace.vala:148 msgid "_API access key" msgstr "_API pristupni ključ" #: ../libdeja/BackendRackspace.vala:149 msgid "S_how API access key" msgstr "P_rikaži API pristupni ključ" #: ../libdeja/BackendRackspace.vala:150 msgid "_Remember API access key" msgstr "_Zapamti API pristupni ključ" #. Translators: %s is a folder. #: ../libdeja/BackendS3.vala:125 #, c-format msgid "%s on Amazon S3" msgstr "%s na Amazon S3" #: ../libdeja/BackendS3.vala:199 #, c-format msgid "You can sign up for an Amazon S3 account online." msgstr "Možete se prijaviti za Amazon S3 račun online." #: ../libdeja/BackendS3.vala:200 msgid "Connect to Amazon S3" msgstr "Spoji se na Amazon S3" #: ../libdeja/BackendS3.vala:201 msgid "_Access key ID" msgstr "_ID pristupnog ključa" #: ../libdeja/BackendS3.vala:202 msgid "_Secret access key" msgstr "_Tajni pristupni ključ" #: ../libdeja/BackendS3.vala:203 msgid "S_how secret access key" msgstr "P_rikaži tajni pristupni ključ" #: ../libdeja/BackendS3.vala:204 msgid "_Remember secret access key" msgstr "_Zapamti tajni pristupni ključ" #: ../libdeja/CommonUtils.vala:437 #, c-format msgid "Could not find backup tool in %s. Your installation is incomplete." msgstr "" "Nemoguće je pronaći alat sigurnosnog kopiranja u %s. Vaša instalacija je " "nepotpuna." #: ../libdeja/CommonUtils.vala:439 msgid "Could not load backup tool. Your installation is incomplete." msgstr "" "Nemoguće je učitavanje alata sigurnosnog kopiranja. Vaša instalacija je " "nepotpuna." #: ../libdeja/CommonUtils.vala:445 msgid "Backup tool is broken. Your installation is incomplete." msgstr "" "Alat sigurnosnog kopiranja je oštećen. Vaša instalacija je nepotpuna." #: ../libdeja/CommonUtils.vala:467 msgid "Could not start backup tool" msgstr "Nemoguće pokretanje alata sigurnosnog kopiranja" #. Translators: this is the home folder and %s is the user's username #: ../libdeja/CommonUtils.vala:569 #, c-format msgid "Home (%s)" msgstr "Osobna mapa (%s)" #. Translators: this is the home folder #: ../libdeja/CommonUtils.vala:574 msgid "Home" msgstr "Osobna mapa" #. Translators: this is the trash folder #: ../libdeja/CommonUtils.vala:579 msgid "Trash" msgstr "Smeće" #: ../libdeja/OperationBackup.vala:42 ../libdeja/OperationVerify.vala:56 msgid "Verifying backup…" msgstr "Provjeravanje sigurnsonog kopiranja..." #: ../libdeja/OperationRestore.vala:51 msgid "Restoring files…" msgstr "Vraćanje datoteka..." #: ../libdeja/OperationVerify.vala:94 msgid "" "Your backup appears to be corrupted. You should delete the backup and try " "again." msgstr "" "Izgleda da je vaša sigurnosna kopija oštećena. Trebali bi obristi sigurnsnu " "kopiju i pokušati ponovno." #: ../libdeja/Operation.vala:61 msgid "Backing up…" msgstr "Sigurnosno kopiranje..." #: ../libdeja/Operation.vala:65 msgid "Checking for backups…" msgstr "Provjera sigurnosnih kopija..." #: ../libdeja/Operation.vala:67 msgid "Listing files…" msgstr "Popis datoteka..." #: ../libdeja/Operation.vala:69 ../libdeja/Operation.vala:103 #: ../libdeja/tools/duplicity/DuplicityJob.vala:385 #: ../libdeja/tools/duplicity/DuplicityJob.vala:392 #: ../libdeja/tools/duplicity/DuplicityJob.vala:411 #: ../libdeja/tools/duplicity/DuplicityJob.vala:416 msgid "Preparing…" msgstr "Pripremanje..." #: ../libdeja/Operation.vala:296 msgid "Another backup operation is already running" msgstr "Druga operacija sigurnosnog kopiranja je već pokrenuta" #: ../libdeja/tools/duplicity/DuplicityJob.vala:89 #: ../libdeja/tools/duplicity/DuplicityJob.vala:172 msgid "Paused (no network)" msgstr "Pauzirano (nema mreže)" #. Was not even a file path (maybe something goofy like computer://) #: ../libdeja/tools/duplicity/DuplicityJob.vala:443 #, c-format msgid "Could not restore ‘%s’: Not a valid file location" msgstr "Nije moguće vratiti ‘%s’: nije valjana lokacija datoteke" #. Tiny backup location. Suggest they get a larger one. #: ../libdeja/tools/duplicity/DuplicityJob.vala:510 msgid "Backup location is too small. Try using one with more space." msgstr "" "Lokacija sigurnosne kopije je premala. Probajte odabrati lokaciju sa više " "slobodnog prostora." #: ../libdeja/tools/duplicity/DuplicityJob.vala:533 msgid "Backup location does not have enough free space." msgstr "Lokacija sigurnosne kopije nema dovoljno slobodnog prostora." #: ../libdeja/tools/duplicity/DuplicityJob.vala:553 #: ../libdeja/tools/duplicity/DuplicityJob.vala:567 msgid "Cleaning up…" msgstr "Čišćenje..." #. OK, we succeeded yay! But some files didn't make it into the backup #. because we couldn't read them. So tell the user so they don't think #. everything is hunky dory. #: ../libdeja/tools/duplicity/DuplicityJob.vala:663 msgid "" "Could not back up the following files. Please make sure you are able to " "open them." msgstr "" "Nemoguće je sigurnosno kopirati sljedeće datoteke. Provjerite možete li ih " "otvoriti." #. OK, we succeeded yay! But some files didn't actually restore #. because we couldn't write to them. So tell the user so they #. don't think everything is hunky dory. #: ../libdeja/tools/duplicity/DuplicityJob.vala:679 msgid "" "Could not restore the following files. Please make sure you are able to " "write to them." msgstr "" "Nije moguće vratiti sljedeće datoteke. Provjerite možete li pisati po njima." #. make text a little nicer than duplicity gives #. duplicity gives something like "home/blah/blah not found in archive, #. no files restored". #: ../libdeja/tools/duplicity/DuplicityJob.vala:923 #, c-format msgid "Could not restore ‘%s’: File not found in backup" msgstr "" "Nije moguće vratiti ‘%s’: Datoteka nije pronađena u sigurnosnoj kopiji" #. notify upper layers, if they want to do anything #. Duplicity tried to ask the user what the encryption password is. #. notify upper layers, if they want to do anything #: ../libdeja/tools/duplicity/DuplicityJob.vala:929 #: ../libdeja/tools/duplicity/DuplicityJob.vala:1027 #: ../libdeja/tools/duplicity/DuplicityJob.vala:1031 msgid "Bad encryption password." msgstr "Loša lozinka šifriranja." #: ../libdeja/tools/duplicity/DuplicityJob.vala:934 msgid "Computer name changed" msgstr "Naziv računala je promijenjen" #: ../libdeja/tools/duplicity/DuplicityJob.vala:934 #, c-format msgid "" "The existing backup is of a computer named %s, but the current computer’s " "name is %s. If this is unexpected, you should back up to a different " "location." msgstr "" "Postojeća sigurnosna kopija je od računala koje se naziva %s; naziv " "trenutnog računala je %s. Ako je ovo neočekivano, trebali bi sigurnosno " "kopirati na drugu lokaciju." #: ../libdeja/tools/duplicity/DuplicityJob.vala:969 #, c-format msgid "Permission denied when trying to create ‘%s’." msgstr "Dozvola odbijena kada pokušavate stvoriti ‘%s’." #. assume error is on backend side #: ../libdeja/tools/duplicity/DuplicityJob.vala:973 #: ../libdeja/tools/duplicity/DuplicityJob.vala:977 #, c-format msgid "Permission denied when trying to read ‘%s’." msgstr "Dozvola odbijena kada pokušavate čitati ‘%s’." #: ../libdeja/tools/duplicity/DuplicityJob.vala:981 #, c-format msgid "Permission denied when trying to delete ‘%s’." msgstr "Dozvola odbijena kada pokušavate obrisati ‘%s’." #: ../libdeja/tools/duplicity/DuplicityJob.vala:988 #, c-format msgid "Backup location ‘%s’ does not exist." msgstr "Lokacija sigurnosne ‘%s’ kopije ne postoji." #: ../libdeja/tools/duplicity/DuplicityJob.vala:994 #: ../libdeja/tools/duplicity/DuplicityJob.vala:1046 msgid "No space left." msgstr "Nema slobodnog prostora." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1008 msgid "Invalid ID." msgstr "Pogrešan ID." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1010 msgid "Invalid secret key." msgstr "Pogrešan tajni ključ." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1012 msgid "Your Amazon Web Services account is not signed up for the S3 service." msgstr "Vaš Amazon Web Servis račun nije prijavljen za S3 uslugu." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1021 msgid "S3 bucket name is not available." msgstr "S3 naziv spremnika nije dostupan." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1035 #, c-format msgid "Error reading file ‘%s’." msgstr "Pgreška pri čitanju datoteke ‘%s’." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1037 #, c-format msgid "Error writing file ‘%s’." msgstr "Pgreška pri pisanju datoteke ‘%s’." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1048 #, c-format msgid "No space left in ‘%s’." msgstr "Nema slobodnog prostora u ‘%s’." #: ../libdeja/tools/duplicity/DuplicityJob.vala:1056 msgid "No backup files found" msgstr "Nema pronađenih datoteka sigurnosne kopije" #: ../libdeja/tools/duplicity/DuplicityJob.vala:1106 msgid "Uploading…" msgstr "Prijenos..." #: ../libdeja/tools/duplicity/DuplicityPlugin.vala:41 msgid "Could not understand duplicity version." msgstr "Nemoguće razumijevanje inačice dvostrukosti." #: ../libdeja/tools/duplicity/DuplicityPlugin.vala:51 #, c-format msgid "Could not understand duplicity version ‘%s’." msgstr "Nemoguće razumijevanje inačice dvostrukosti ‘%s’." #: ../libdeja/tools/duplicity/DuplicityPlugin.vala:54 #, c-format msgid "" "Déjà Dup Backup Tool requires at least version %d.%d.%.2d of duplicity, but " "only found version %d.%d.%.2d" msgstr "" "Déjà Dup alat sigurnosnog kopiranja zahtjeva najmanje inačicu %d.%d.%.2d " "dvostrukosti, pronađena inačica je %d.%d.%.2d" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/transmission-gtk.po0000644000000000000000000016247412704126313022065 0ustar # Croatian translation for transmission # Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009 # This file is distributed under the same license as the transmission package. # FIRST AUTHOR , 2009. # msgid "" msgstr "" "Project-Id-Version: transmission\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-03-21 17:48+0000\n" "PO-Revision-Date: 2016-01-10 08:06+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 07:04+0000\n" "X-Generator: Launchpad (build 17995)\n" "Language: hr\n" #: ../cli/cli.c:115 ../gtk/util.c:86 ../libtransmission/utils.c:1525 msgid "None" msgstr "Nijedan" #: ../gtk/actions.c:42 msgid "Sort by _Activity" msgstr "Razvrstaj po _aktivnosti" #: ../gtk/actions.c:43 msgid "Sort by _Name" msgstr "Razvrstaj po _nazivu" #: ../gtk/actions.c:44 msgid "Sort by _Progress" msgstr "Razvrstaj po _napretku" #: ../gtk/actions.c:45 msgid "Sort by _Queue" msgstr "Razvrstaj po _redu čekanja" #: ../gtk/actions.c:46 msgid "Sort by Rati_o" msgstr "Razvrstaj po omjer_u" #: ../gtk/actions.c:47 msgid "Sort by Stat_e" msgstr "Razvrstaj po stanj_u" #: ../gtk/actions.c:48 msgid "Sort by A_ge" msgstr "Razvrstaj po s_tarosti" #: ../gtk/actions.c:49 msgid "Sort by Time _Left" msgstr "Razvrstaj po preostalom _vremenu" #: ../gtk/actions.c:50 msgid "Sort by Si_ze" msgstr "Razvrstaj po veli_čini" #: ../gtk/actions.c:67 msgid "_Show Transmission" msgstr "_Prikaži Transmission" #: ../gtk/actions.c:68 msgid "Message _Log" msgstr "_Zapisnik poruka" #: ../gtk/actions.c:83 msgid "Enable Alternative Speed _Limits" msgstr "Omogući a_lternativna ograničenja brzine" #: ../gtk/actions.c:84 msgid "_Compact View" msgstr "_Zbijeni prikaz" #: ../gtk/actions.c:85 msgid "Re_verse Sort Order" msgstr "Ob_rnuti redoslijed razvrstavanja" #: ../gtk/actions.c:86 msgid "_Filterbar" msgstr "_Filter traka" #: ../gtk/actions.c:87 msgid "_Statusbar" msgstr "_Statusna traka" #: ../gtk/actions.c:88 msgid "_Toolbar" msgstr "_Alatna traka" #: ../gtk/actions.c:93 msgid "_File" msgstr "_Datoteka" #: ../gtk/actions.c:94 msgid "_Torrent" msgstr "_Torrent" #: ../gtk/actions.c:95 msgid "_View" msgstr "P_ogled" #: ../gtk/actions.c:96 msgid "_Sort Torrents By" msgstr "_Razvrstaj torrente po" #: ../gtk/actions.c:97 msgid "_Queue" msgstr "_Red čekanja" #: ../gtk/actions.c:98 ../gtk/details.c:2604 msgid "_Edit" msgstr "_Uredi" #: ../gtk/actions.c:99 msgid "_Help" msgstr "_Pomoć" #: ../gtk/actions.c:100 msgid "Copy _Magnet Link to Clipboard" msgstr "Kopiraj _Magnetnu poveznicu u međuspremnik" #: ../gtk/actions.c:101 msgid "Open _URL…" msgstr "Otvori _URL…" #: ../gtk/actions.c:101 msgid "Open URL…" msgstr "Otvori URL…" #: ../gtk/actions.c:102 ../gtk/actions.c:103 msgid "Open a torrent" msgstr "Otvori torrent" #: ../gtk/actions.c:104 msgid "_Start" msgstr "_Pokreni" #: ../gtk/actions.c:104 msgid "Start torrent" msgstr "Pokreni torrent" #: ../gtk/actions.c:105 msgid "Start _Now" msgstr "Pokre_ni odmah" #: ../gtk/actions.c:105 msgid "Start torrent now" msgstr "Pokreni torrent odmah" #: ../gtk/actions.c:106 msgid "_Statistics" msgstr "_Statistike" #: ../gtk/actions.c:107 msgid "_Donate" msgstr "_Doniraj" #: ../gtk/actions.c:108 msgid "_Verify Local Data" msgstr "_Provjeri lokalne podatke" #: ../gtk/actions.c:109 msgid "_Pause" msgstr "_Pauza" #: ../gtk/actions.c:109 msgid "Pause torrent" msgstr "Pauziraj torrent" #: ../gtk/actions.c:110 msgid "_Pause All" msgstr "_Pauziraj sve" #: ../gtk/actions.c:110 msgid "Pause all torrents" msgstr "_Pauziraj sve torrente" #: ../gtk/actions.c:111 msgid "_Start All" msgstr "_Pokreni sve" #: ../gtk/actions.c:111 msgid "Start all torrents" msgstr "Pokreni sve torrente" #: ../gtk/actions.c:112 msgid "Set _Location…" msgstr "Postavi _lokaciju..." #: ../gtk/actions.c:113 msgid "Remove torrent" msgstr "Ukloni torrent" #: ../gtk/actions.c:114 msgid "_Delete Files and Remove" msgstr "_Obriši i ukloni datoteke" #: ../gtk/actions.c:115 msgid "_New…" msgstr "_Novi…" #: ../gtk/actions.c:115 msgid "Create a torrent" msgstr "_Stvori torrent" #: ../gtk/actions.c:116 msgid "_Quit" msgstr "_Izlaz" #: ../gtk/actions.c:117 msgid "Select _All" msgstr "Odaberi _sve" #: ../gtk/actions.c:118 msgid "Dese_lect All" msgstr "Po_ništi odabir" #: ../gtk/actions.c:120 msgid "Torrent properties" msgstr "Svojstva torrenta" #: ../gtk/actions.c:121 msgid "Open Fold_er" msgstr "Otvori _mapu" #: ../gtk/actions.c:123 msgid "_Contents" msgstr "_Priručnik" #: ../gtk/actions.c:124 msgid "Ask Tracker for _More Peers" msgstr "Pitaj pratitelja za _više točaka" #: ../gtk/actions.c:125 msgid "Move to _Top" msgstr "Pomakni na _vrh" #: ../gtk/actions.c:126 msgid "Move _Up" msgstr "Pomakni _gore" #: ../gtk/actions.c:127 msgid "Move _Down" msgstr "Pomakni _dolje" #: ../gtk/actions.c:128 msgid "Move to _Bottom" msgstr "Pomakni na dn_o" #: ../gtk/actions.c:129 msgid "Present Main Window" msgstr "Predstavi glavni prozor" #: ../gtk/details.c:475 ../gtk/details.c:487 msgid "Use global settings" msgstr "Koristi globalne postavke" #: ../gtk/details.c:476 msgid "Seed regardless of ratio" msgstr "Dijeli bez obzira na omjer" #: ../gtk/details.c:477 msgid "Stop seeding at ratio:" msgstr "Zaustavi dijeljenje pri omjeru:" #: ../gtk/details.c:488 msgid "Seed regardless of activity" msgstr "Dijeli bez obzira na aktivnost" #: ../gtk/details.c:489 msgid "Stop seeding if idle for N minutes:" msgstr "Zaustavi dijeljenje pri minuta neaktivnosti:" #: ../gtk/details.c:505 ../gtk/tr-prefs.c:1319 msgid "Speed" msgstr "Brzina" #: ../gtk/details.c:507 msgid "Honor global _limits" msgstr "Poštuj globalna _ograničenja" #: ../gtk/details.c:512 #, c-format msgid "Limit _download speed (%s):" msgstr "Ograniči brzinu _preuzimanja (%s):" #: ../gtk/details.c:525 #, c-format msgid "Limit _upload speed (%s):" msgstr "Ograniči brzinu _slanja (%s):" #: ../gtk/details.c:538 ../gtk/open-dialog.c:368 msgid "Torrent _priority:" msgstr "Prioritet _torrenta:" #: ../gtk/details.c:542 msgid "Seeding Limits" msgstr "Ograničenja dijeljenja" #: ../gtk/details.c:552 msgid "_Ratio:" msgstr "_Omjer:" #: ../gtk/details.c:561 msgid "_Idle:" msgstr "_Neaktivnost:" #: ../gtk/details.c:564 msgid "Peer Connections" msgstr "Povezivanje točaka" #: ../gtk/details.c:567 msgid "_Maximum peers:" msgstr "_Najviše točaka:" #: ../gtk/details.c:586 ../gtk/torrent-cell-renderer.c:206 #: ../libtransmission/verify.c:264 msgid "Queued for verification" msgstr "Čekanje za provjeru" #: ../gtk/details.c:587 msgid "Verifying local data" msgstr "Provjera lokalnih podataka" #: ../gtk/details.c:588 ../gtk/torrent-cell-renderer.c:209 msgid "Queued for download" msgstr "Čeka za preuzimanje" #: ../gtk/details.c:589 ../gtk/filter.c:591 msgctxt "Verb" msgid "Downloading" msgstr "Preuzimanje" #: ../gtk/details.c:590 ../gtk/torrent-cell-renderer.c:212 msgid "Queued for seeding" msgstr "Čeka za dijeljenje" #: ../gtk/details.c:591 ../gtk/filter.c:592 msgctxt "Verb" msgid "Seeding" msgstr "Dijeljenje" #: ../gtk/details.c:592 ../gtk/filter.c:594 ../gtk/torrent-cell-renderer.c:203 msgid "Finished" msgstr "Završeno" #: ../gtk/details.c:592 ../gtk/filter.c:593 ../gtk/torrent-cell-renderer.c:203 msgid "Paused" msgstr "Pauzirano" #: ../gtk/details.c:625 msgid "N/A" msgstr "Nedostupno" #: ../gtk/details.c:637 ../gtk/file-list.c:619 msgid "Mixed" msgstr "Izmješano" #: ../gtk/details.c:638 msgid "No Torrents Selected" msgstr "Nema odabranih torrenata" #: ../gtk/details.c:667 msgid "Private to this tracker -- DHT and PEX disabled" msgstr "Privatno za ovaj pratitelj - DHT i PEX onemogućeno" #: ../gtk/details.c:669 msgid "Public torrent" msgstr "Javni torrent" #: ../gtk/details.c:700 #, c-format msgid "Created by %1$s" msgstr "Napravio/la %1$s" #: ../gtk/details.c:702 #, c-format msgid "Created on %1$s" msgstr "Napravljeno %1$s" #: ../gtk/details.c:704 #, c-format msgid "Created by %1$s on %2$s" msgstr "Napravio/la %1$s datuma %2$s" #: ../gtk/details.c:816 msgid "Unknown" msgstr "Nepoznato" #: ../gtk/details.c:849 #, c-format msgid "%1$s (%2$'d piece @ %3$s)" msgid_plural "%1$s (%2$'d pieces @ %3$s)" msgstr[0] "%1$s (%2$'d dio @ %3$s)" msgstr[1] "%1$s (%2$'d dijela @ %3$s)" msgstr[2] "%1$s (%2$'d dijelova @ %3$s)" #: ../gtk/details.c:857 #, c-format msgid "%1$s (%2$'d piece)" msgid_plural "%1$s (%2$'d pieces)" msgstr[0] "%1$s (%2$'d dio)" msgstr[1] "%1$s (%2$'d dijela)" msgstr[2] "%1$s (%2$'d dijelova)" #: ../gtk/details.c:899 #, c-format msgid "%1$s (%2$s%%)" msgstr "%1$s (%2$s%%)" #: ../gtk/details.c:901 #, c-format msgid "%1$s (%2$s%% of %3$s%% Available)" msgstr "%1$s (%2$s%% od %3$s%% dostupno)" #: ../gtk/details.c:903 #, c-format msgid "%1$s (%2$s%% of %3$s%% Available); %4$s Unverified" msgstr "%1$s (%2$s%% od %3$s%% dostupno); %4$s neprovjereno" #: ../gtk/details.c:930 #, c-format msgid "%1$s (+%2$s corrupt)" msgstr "%1$s (+%2$s neispravno)" #: ../gtk/details.c:958 #, c-format msgid "%s (Ratio: %s)" msgstr "%s (Omjer: %s)" #: ../gtk/details.c:991 msgid "No errors" msgstr "Nema grešaka" #: ../gtk/details.c:1010 msgid "Never" msgstr "Nikad" #: ../gtk/details.c:1017 msgid "Active now" msgstr "Aktivno sada" #: ../gtk/details.c:1023 #, c-format msgid "%1$s ago" msgstr "prije %1$s" #: ../gtk/details.c:1042 msgid "Activity" msgstr "Aktivnost" #: ../gtk/details.c:1047 msgid "Torrent size:" msgstr "Veličina torrenta:" #: ../gtk/details.c:1052 msgid "Have:" msgstr "Napredak:" #: ../gtk/details.c:1057 ../gtk/stats.c:152 ../gtk/stats.c:174 msgid "Uploaded:" msgstr "Poslano:" #: ../gtk/details.c:1062 ../gtk/stats.c:156 ../gtk/stats.c:178 msgid "Downloaded:" msgstr "Preuzeto:" #: ../gtk/details.c:1067 msgid "State:" msgstr "Stanje:" #: ../gtk/details.c:1072 msgid "Running time:" msgstr "Vremena aktivno:" #: ../gtk/details.c:1077 msgid "Remaining time:" msgstr "Preostalo vrijeme:" #: ../gtk/details.c:1082 msgid "Last activity:" msgstr "Zadnja aktivnost:" #: ../gtk/details.c:1088 msgid "Error:" msgstr "Greška:" #: ../gtk/details.c:1092 msgid "Details" msgstr "Pojedinosti" #: ../gtk/details.c:1098 msgid "Location:" msgstr "Lokacija:" #: ../gtk/details.c:1105 msgid "Hash:" msgstr "Jedinstvena vrijednost:" #: ../gtk/details.c:1111 msgid "Privacy:" msgstr "Privatnost:" #: ../gtk/details.c:1118 msgid "Origin:" msgstr "Podrijetlo:" #: ../gtk/details.c:1135 msgid "Comment:" msgstr "Komentar:" #: ../gtk/details.c:1163 msgid "Web Seeds" msgstr "Web djeljitelji" #: ../gtk/details.c:1165 ../gtk/details.c:1218 msgid "Down" msgstr "Brzina preuzimanja" #: ../gtk/details.c:1216 msgid "Address" msgstr "Adresa" #: ../gtk/details.c:1220 msgid "Up" msgstr "Brzina slanja" #: ../gtk/details.c:1221 msgid "Client" msgstr "Klijent" #: ../gtk/details.c:1222 msgid "%" msgstr "%" #: ../gtk/details.c:1224 msgid "Up Reqs" msgstr "Zahtjevi slanja" #: ../gtk/details.c:1226 msgid "Dn Reqs" msgstr "Zahtjevi preuzimanja" #: ../gtk/details.c:1228 msgid "Dn Blocks" msgstr "Preuzeti blokovi" #: ../gtk/details.c:1230 msgid "Up Blocks" msgstr "Poslani blokovi" #: ../gtk/details.c:1232 msgid "We Cancelled" msgstr "Mi smo otkazali" #: ../gtk/details.c:1234 msgid "They Cancelled" msgstr "Oni su otkazali" #: ../gtk/details.c:1235 msgid "Flags" msgstr "Oznake" #: ../gtk/details.c:1618 msgid "Optimistic unchoke" msgstr "Optimističan prekid blokiranja" #: ../gtk/details.c:1619 msgid "Downloading from this peer" msgstr "Preuzimanje s ove točke" #: ../gtk/details.c:1620 msgid "We would download from this peer if they would let us" msgstr "Preuzimali bismo s ove točke kada bi nam dopustili" #: ../gtk/details.c:1621 msgid "Uploading to peer" msgstr "Slanje točki" #: ../gtk/details.c:1622 msgid "We would upload to this peer if they asked" msgstr "Slali bismo ovoj točki da nas to traže" #: ../gtk/details.c:1623 msgid "Peer has unchoked us, but we're not interested" msgstr "Točka nas je odblokirala, ali nismo zainteresirani" #: ../gtk/details.c:1624 msgid "We unchoked this peer, but they're not interested" msgstr "Odblokirali smo ovu točku, ali ona nije zainteresirana" #: ../gtk/details.c:1625 msgid "Encrypted connection" msgstr "Šifrirano povezivanje" #: ../gtk/details.c:1626 msgid "Peer was found through Peer Exchange (PEX)" msgstr "Čvor je pronađen kroz Peer Exchange (PEX)" #: ../gtk/details.c:1627 msgid "Peer was found through DHT" msgstr "Čvor je pronađen kroz DHT" #: ../gtk/details.c:1628 msgid "Peer is an incoming connection" msgstr "Točka je dolazno povezivanje" #: ../gtk/details.c:1629 msgid "Peer is connected over µTP" msgstr "Čvor je povezan putem µTP" #: ../gtk/details.c:1881 ../gtk/details.c:2619 msgid "Show _more details" msgstr "Prikaži _više pojedinosti" #: ../gtk/details.c:1952 #, c-format msgid "Got a list of %1$s%2$'d peers%3$s %4$s ago" msgstr "Dobiven popis od %1$s%2$'d točaka%3$s prije %4$s" #: ../gtk/details.c:1956 #, c-format msgid "Peer list request %1$stimed out%2$s %3$s ago; will retry" msgstr "" "Zahtjev popisa točaka %1$sistekao%2$s prije %3$s; slijedi ponovni pokušaj" #: ../gtk/details.c:1959 #, c-format msgid "Got an error %1$s\"%2$s\"%3$s %4$s ago" msgstr "Dobivena greška %1$s\"%2$s\"%3$s prije %4$s" #: ../gtk/details.c:1967 msgid "No updates scheduled" msgstr "Nema zakazanih dopuna" #: ../gtk/details.c:1973 #, c-format msgid "Asking for more peers in %s" msgstr "Traženje više točaka unutar %s" #: ../gtk/details.c:1978 msgid "Queued to ask for more peers" msgstr "Upit za dodatnim točaka stavljen u red čekanja" #: ../gtk/details.c:1984 #, c-format msgid "Asking for more peers now… %s" msgstr "Slanje upita za više čvorova (upravo)… %s" #: ../gtk/details.c:1995 #, c-format msgid "Tracker had %s%'d seeders and %'d leechers%s %s ago" msgstr "Pratitelj je imao %s%'d dijelitelja i %'d preuzimatelja%s prije %s" #: ../gtk/details.c:1999 #, c-format msgid "Got a scrape error \"%s%s%s\" %s ago" msgstr "Dobivena greška čišćenja \"%s%s%s\" prije %s" #: ../gtk/details.c:2010 #, c-format msgid "Asking for peer counts in %s" msgstr "Traženje broja točaka u %s" #: ../gtk/details.c:2015 msgid "Queued to ask for peer counts" msgstr "Upit broja točaka stavljen u red čekanja" #: ../gtk/details.c:2021 #, c-format msgid "Asking for peer counts now… %s" msgstr "Slanje upita za broj čvorova (upravo)… %s" #: ../gtk/details.c:2306 msgid "List contains invalid URLs" msgstr "Popis sadrži neispravne URL-ove" #: ../gtk/details.c:2311 ../gtk/file-list.c:819 msgid "Please correct the errors and try again." msgstr "Ispravite greške i pokušajte ponovno." #: ../gtk/details.c:2367 #, c-format msgid "%s - Edit Trackers" msgstr "%s - uređivanje pratitelja" #: ../gtk/details.c:2377 msgid "Tracker Announce URLs" msgstr "Pratiteljevi URL-ovi najave" #: ../gtk/details.c:2380 ../gtk/makemeta-ui.c:499 msgid "" "To add a backup URL, add it on the line after the primary URL.\n" "To add another primary URL, add it after a blank line." msgstr "" "Kako bi dodali pomoćni URL, dodajte ga u redak ispod glavnog URL-a.\n" "Kako bi dodali novi glavni URL, dodajte ga nakon praznog retka." #: ../gtk/details.c:2477 #, c-format msgid "%s - Add Tracker" msgstr "%s - dodavanje pratitelja" #: ../gtk/details.c:2491 msgid "Tracker" msgstr "Pratitelj" #: ../gtk/details.c:2497 msgid "_Announce URL:" msgstr "_URL objave:" #: ../gtk/details.c:2575 ../gtk/details.c:2720 msgid "Trackers" msgstr "Pratitelji" #: ../gtk/details.c:2599 msgid "_Add" msgstr "_Dodaj" #: ../gtk/details.c:2610 msgid "_Remove" msgstr "_Ukloni" #: ../gtk/details.c:2626 msgid "Show _backup trackers" msgstr "Prikaži _pomoćne pratitelje" #: ../gtk/details.c:2712 ../gtk/msgwin.c:438 msgid "Information" msgstr "Informacije" #: ../gtk/details.c:2716 msgid "Peers" msgstr "Točke" #: ../gtk/details.c:2725 msgid "File listing not available for combined torrent properties" msgstr "Popis datoteka nije dostupan za kombinirana svojstva torrenata" #: ../gtk/details.c:2729 ../gtk/makemeta-ui.c:446 msgid "Files" msgstr "Datoteke" #: ../gtk/details.c:2733 ../gtk/tr-prefs.c:1226 ../gtk/tr-window.c:685 msgid "Options" msgstr "Mogućnosti" #: ../gtk/details.c:2757 #, c-format msgid "%s Properties" msgstr "%s svojstva" #: ../gtk/details.c:2768 #, c-format msgid "%'d Torrent Properties" msgstr "%'d torrent svojstva" #: ../gtk/dialogs.c:95 #, c-format msgid "Remove torrent?" msgid_plural "Remove %d torrents?" msgstr[0] "Želite li ukloniti torrent?" msgstr[1] "Želite li ukloniti %d torrenta?" msgstr[2] "Želite li ukloniti %d torrenta?" #: ../gtk/dialogs.c:101 #, c-format msgid "Delete this torrent's downloaded files?" msgid_plural "Delete these %d torrents' downloaded files?" msgstr[0] "Želite li obrisati preuzete datoteke ovog torrenta?" msgstr[1] "Želite li obrisati preuzete datoteke ova %d torrenta?" msgstr[2] "Želite li obrisati preuzete datoteke ovih %d torrenta?" #: ../gtk/dialogs.c:111 msgid "" "Once removed, continuing the transfer will require the torrent file or " "magnet link." msgid_plural "" "Once removed, continuing the transfers will require the torrent files or " "magnet links." msgstr[0] "" "Nakon brisanja, nastavak prijenosa će zahtijevati torrent datoteku ili " "magnetnu poveznicu." msgstr[1] "" "Nakon brisanja, nastavak prijenosa će zahtijevati torrent datoteku ili " "magnetnu poveznicu." msgstr[2] "" "Nakon brisanja, nastavak prijenosa će zahtijevati torrent datoteku ili " "magnetnu poveznicu." #: ../gtk/dialogs.c:117 msgid "This torrent has not finished downloading." msgid_plural "These torrents have not finished downloading." msgstr[0] "Nije završeno preuzimanje ovog torrenta." msgstr[1] "Nije završeno preuzimanje ovih torrenata." msgstr[2] "Nije završeno preuzimanje ovih torrenata." #: ../gtk/dialogs.c:123 msgid "This torrent is connected to peers." msgid_plural "These torrents are connected to peers." msgstr[0] "Ovaj je torrent povezan s točkama." msgstr[1] "Ovi su torrenti povezani s točkama." msgstr[2] "Ovi su torrenti povezani s točkama." #: ../gtk/dialogs.c:130 msgid "One of these torrents is connected to peers." msgid_plural "Some of these torrents are connected to peers." msgstr[0] "Jedan od ovih torrenta je povezan s točkama." msgstr[1] "Neki od ovih torrenata su povezni s točkama." msgstr[2] "Neki od ovih torrenata su povezni s točkama." #: ../gtk/dialogs.c:137 msgid "One of these torrents has not finished downloading." msgid_plural "Some of these torrents have not finished downloading." msgstr[0] "Preuzimanje jednog od ovih torrenta nije završeno." msgstr[1] "Preuzimanje nekih od ovih torrenata nije završeno." msgstr[2] "Preuzimanje nekih od ovih torrenata nije završeno." #: ../gtk/file-list.c:616 ../gtk/util.c:474 msgid "High" msgstr "Visok" #: ../gtk/file-list.c:617 ../gtk/util.c:475 msgid "Normal" msgstr "Normalan" #: ../gtk/file-list.c:618 ../gtk/util.c:476 msgid "Low" msgstr "Nizak" #: ../gtk/file-list.c:814 #, c-format msgid "Unable to rename file as \"%s\": %s" msgstr "Neuspjelo preimenovanje datoteke kao \"%s\": %s" #: ../gtk/file-list.c:936 ../gtk/msgwin.c:303 msgid "Name" msgstr "Naziv" #. add "size" column #: ../gtk/file-list.c:953 msgid "Size" msgstr "Veličina" #. add "progress" column #: ../gtk/file-list.c:968 msgid "Have" msgstr "Napredak" #. add "enabled" column #: ../gtk/file-list.c:981 msgid "Download" msgstr "Preuzmi" #. add priority column #: ../gtk/file-list.c:997 msgid "Priority" msgstr "Prioritet" #: ../gtk/filter.c:281 ../gtk/filter.c:588 msgid "All" msgstr "Sve" #: ../gtk/filter.c:590 msgid "Active" msgstr "Aktivno" #: ../gtk/filter.c:595 msgctxt "Verb" msgid "Verifying" msgstr "Provjera" #: ../gtk/filter.c:596 ../gtk/msgwin.c:437 ../gtk/util.c:687 #, c-format msgid "Error" msgstr "Greška" #: ../gtk/filter.c:893 #, c-format msgid "_Show:" msgstr "_Prikaži:" #: ../gtk/filter.c:895 #, c-format msgid "_Show %'d of:" msgstr "_Prikaži %'d od:" #: ../gtk/main.c:329 #, c-format msgid "Error registering Transmission as a %s handler: %s" msgstr "Greška registracije Transmissiona kao %s rukovatelja: %s" #: ../gtk/main.c:492 #, c-format msgid "" "Got signal %d; trying to shut down cleanly. Do it again if it gets stuck." msgstr "" "Dobiven signal %d; pokušaj urednog zatvaranja. Ponovite ako se zaglavi." #: ../gtk/main.c:625 msgid "Where to look for configuration files" msgstr "Gdje tražiti konfiguracijske datoteke" #: ../gtk/main.c:626 msgid "Start with all torrents paused" msgstr "Pokreni sa svim torrentima pauzirano" #: ../gtk/main.c:627 msgid "Start minimized in notification area" msgstr "Pokreni smanjeno u traci sustava" #: ../gtk/main.c:628 msgid "Show version number and exit" msgstr "Prikaži broj inačice i izađi" #: ../gtk/main.c:647 ../gtk/transmission-gtk.desktop.in.h:1 msgid "Transmission" msgstr "Transmission" #. parse the command line #: ../gtk/main.c:651 msgid "[torrent files or urls]" msgstr "[torrent datoteke ili url-ovi]" #: ../gtk/main.c:656 #, c-format msgid "" "%s\n" "Run '%s --help' to see a full list of available command line options.\n" msgstr "" "%s\n" "Pokrenite '%s --help' za popis svih mogućih naredbi naredbenog retka.\n" #: ../gtk/main.c:756 msgid "" "Transmission is a file sharing program. When you run a torrent, its data " "will be made available to others by means of upload. Any content you share " "is your sole responsibility." msgstr "" "Transmission je program za dijeljenje datoteka. Kada pokrenete torrent, " "njegovi podaci će biti dostupni ostalim korisnicima putem slanja. Za sav " "sadržaj koji dijelite Vi ste odgovorni." #: ../gtk/main.c:758 msgid "I _Agree" msgstr "Slažem _se" #: ../gtk/main.c:989 msgid "Closing Connections" msgstr "Zatvaranje povezivanja" #: ../gtk/main.c:993 msgid "Sending upload/download totals to tracker…" msgstr "Slanje zbroja slanja/preuzimanja na pratitelj..." #: ../gtk/main.c:998 msgid "_Quit Now" msgstr "_Izađi odmah" #: ../gtk/main.c:1059 msgid "Couldn't add corrupt torrent" msgid_plural "Couldn't add corrupt torrents" msgstr[0] "Nemoguće dodati oštećeni torrent" msgstr[1] "Nemoguće dodati oštećene torrente" msgstr[2] "Nemoguće dodati oštećene torrente" #: ../gtk/main.c:1066 msgid "Couldn't add duplicate torrent" msgid_plural "Couldn't add duplicate torrents" msgstr[0] "Nemoguće dodati duplikat torrenta" msgstr[1] "Nemoguće dodati duplikate torrenata" msgstr[2] "Nemoguće dodati duplikate torrenata" #: ../gtk/main.c:1374 msgid "A fast and easy BitTorrent client" msgstr "Jednostavan i brz BitTorrent klijent" #: ../gtk/main.c:1375 msgid "Copyright (c) The Transmission Project" msgstr "Autorska prava (c) Transmission projekt" #. Translators: translate "translator-credits" as your name #. to have it appear in the credits in the "About" #. dialog #: ../gtk/main.c:1381 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Denis Štogl https://launchpad.net/~destogl\n" " Krzysztof Klimonda https://launchpad.net/~kklimonda\n" " Miroslav Matejaš https://launchpad.net/~silverspace+amd64\n" " Saša Mofardin - Mofa https://launchpad.net/~sasa-mofardin\n" " Saša Teković https://launchpad.net/~hseagle2015\n" " antisa https://launchpad.net/~antisa\n" " damir https://launchpad.net/~markovi-damir\n" " freedomrun https://launchpad.net/~freedomrun\n" " gogo https://launchpad.net/~trebelnik-stefina" #: ../gtk/makemeta-ui.c:72 #, c-format msgid "Creating \"%s\"" msgstr "Stvaranje \"%s\"" #: ../gtk/makemeta-ui.c:74 #, c-format msgid "Created \"%s\"!" msgstr "Stvoren \"%s\"!" #: ../gtk/makemeta-ui.c:76 #, c-format msgid "Error: invalid announce URL \"%s\"" msgstr "Greška: neispravan URL najave \"%s\"" #: ../gtk/makemeta-ui.c:78 #, c-format msgid "Cancelled" msgstr "Otkazano" #: ../gtk/makemeta-ui.c:80 #, c-format msgid "Error reading \"%s\": %s" msgstr "Greška pri čitanju \"%s\": %s" #: ../gtk/makemeta-ui.c:82 #, c-format msgid "Error writing \"%s\": %s" msgstr "Greška pri zapisivanju \"%s\": %s" #. how much data we've scanned through to generate checksums #: ../gtk/makemeta-ui.c:103 #, c-format msgid "Scanned %s" msgstr "Skenirano %s" #: ../gtk/makemeta-ui.c:171 ../gtk/makemeta-ui.c:434 msgid "New Torrent" msgstr "Novi torrent" #: ../gtk/makemeta-ui.c:187 msgid "Creating torrent…" msgstr "Stvaranje torrenta..." #: ../gtk/makemeta-ui.c:299 msgid "No source selected" msgstr "Nije odabran izvor" #: ../gtk/makemeta-ui.c:305 #, c-format msgid "%1$s; %2$'d File" msgid_plural "%1$s; %2$'d Files" msgstr[0] "%1$s; %2$'d datoteka" msgstr[1] "%1$s; %2$'d datoteke" msgstr[2] "%1$s; %2$'d datoteka" #: ../gtk/makemeta-ui.c:312 #, c-format msgid "%1$'d Piece @ %2$s" msgid_plural "%1$'d Pieces @ %2$s" msgstr[0] "%1$'d dio @ %2$s" msgstr[1] "%1$'d dijela @ %2$s" msgstr[2] "%1$'d dijelova @ %2$s" #: ../gtk/makemeta-ui.c:448 msgid "Sa_ve to:" msgstr "Sp_remi u:" #: ../gtk/makemeta-ui.c:454 msgid "Source F_older:" msgstr "Izv_orna mapa:" #: ../gtk/makemeta-ui.c:466 msgid "Source _File:" msgstr "Izvorna _datoteka:" #: ../gtk/makemeta-ui.c:478 msgid "No source selected" msgstr "Nije odabran izvor" #: ../gtk/makemeta-ui.c:482 msgid "Properties" msgstr "Svojstva" #: ../gtk/makemeta-ui.c:484 msgid "_Trackers:" msgstr "Pra_titelji:" #: ../gtk/makemeta-ui.c:506 msgid "Co_mment:" msgstr "Ko_mentar:" #: ../gtk/makemeta-ui.c:515 msgid "_Private torrent" msgstr "_Privatni torrent" #: ../gtk/msgwin.c:142 #, c-format msgid "Couldn't save \"%s\"" msgstr "Neuspjelo spremanje \"%s\"" #: ../gtk/msgwin.c:203 msgid "Save Log" msgstr "Spremi zapis" #: ../gtk/msgwin.c:298 msgid "Time" msgstr "Vrijeme" #: ../gtk/msgwin.c:308 msgid "Message" msgstr "Poruka" #: ../gtk/msgwin.c:439 msgid "Debug" msgstr "Otkloni grešku" #: ../gtk/msgwin.c:465 msgid "Message Log" msgstr "Zapisnik poruka" #: ../gtk/msgwin.c:500 msgid "Level" msgstr "Razina" #: ../gtk/notify.c:214 msgid "Open File" msgstr "Otvori datoteku" #: ../gtk/notify.c:219 msgid "Open Folder" msgstr "Otvori mapu" #: ../gtk/notify.c:227 msgid "Torrent Complete" msgstr "Torrent preuzet" #: ../gtk/notify.c:249 msgid "Torrent Added" msgstr "Torrent dodan" #: ../gtk/open-dialog.c:250 msgid "Torrent files" msgstr "Torrent datoteke" #: ../gtk/open-dialog.c:255 msgid "All files" msgstr "Sve datoteke" #. make the dialog #: ../gtk/open-dialog.c:280 msgid "Torrent Options" msgstr "Mogućnosti torrenta" #: ../gtk/open-dialog.c:302 ../gtk/tr-prefs.c:296 msgid "Mo_ve .torrent file to the trash" msgstr "Pre_mjesti .torrent datoteku u smeće" #: ../gtk/open-dialog.c:304 msgid "_Start when added" msgstr "_Pokreni nakon dodavanja" #. "torrent file" row #: ../gtk/open-dialog.c:320 msgid "_Torrent file:" msgstr "_Torrent datoteka:" #: ../gtk/open-dialog.c:323 msgid "Select Source File" msgstr "Izaberi datoteku izvora" #: ../gtk/open-dialog.c:335 msgid "_Destination folder:" msgstr "_Odredišna mapa:" #: ../gtk/open-dialog.c:338 msgid "Select Destination Folder" msgstr "Odaberite odredišnu mapu" #: ../gtk/open-dialog.c:444 msgid "Open a Torrent" msgstr "Otvori Torrent" #: ../gtk/open-dialog.c:460 msgid "Show _options dialog" msgstr "Prikaži dijalog _mogućnosti" #: ../gtk/open-dialog.c:509 msgid "Open URL" msgstr "Otvori URL" #: ../gtk/open-dialog.c:522 msgid "Open torrent from URL" msgstr "Otvori torrent iz URL-a" #: ../gtk/open-dialog.c:527 msgid "_URL" msgstr "_URL" #: ../gtk/relocate.c:61 #, c-format msgid "Moving \"%s\"" msgstr "Premještanje \"%s\"" #: ../gtk/relocate.c:83 msgid "Couldn't move torrent" msgstr "Premještanje torrenta nije moguće" #: ../gtk/relocate.c:118 msgid "This may take a moment…" msgstr "Ovo može potrajati nekoliko trenutaka..." #: ../gtk/relocate.c:149 ../gtk/relocate.c:169 msgid "Set Torrent Location" msgstr "Postavi lokaciju torrenta" #: ../gtk/relocate.c:165 msgid "Location" msgstr "Lokacija" #: ../gtk/relocate.c:172 msgid "Torrent _location:" msgstr "Lokacija _torrenta:" #: ../gtk/relocate.c:173 msgid "_Move from the current folder" msgstr "_Premjesti iz trenutne mape" #: ../gtk/relocate.c:176 msgid "Local data is _already there" msgstr "Lokalni podaci su _već tu" #: ../gtk/stats.c:72 ../gtk/stats.c:167 #, c-format msgid "Started %'d time" msgid_plural "Started %'d times" msgstr[0] "Pokrenuto %'d put" msgstr[1] "Pokrenuto %'d puta" msgstr[2] "Pokrenuto %'d puta" #: ../gtk/stats.c:96 msgid "Reset your statistics?" msgstr "Želite li poništiti statistiku?" #: ../gtk/stats.c:97 msgid "" "These statistics are for your information only. Resetting them doesn't " "affect the statistics logged by your BitTorrent trackers." msgstr "" "Ove statistike su samo za vašu informaciju. Poništavanje statistike ne " "utječe na statistike vaših BitTorrent pratitelja." #: ../gtk/stats.c:108 ../gtk/stats.c:136 msgid "_Reset" msgstr "_Poništi" #: ../gtk/stats.c:133 ../gtk/tr-window.c:730 msgid "Statistics" msgstr "Statistike" #: ../gtk/stats.c:148 msgid "Current Session" msgstr "Trenutna prijava" #: ../gtk/stats.c:160 ../gtk/stats.c:182 msgid "Ratio:" msgstr "Omjer:" #: ../gtk/stats.c:164 ../gtk/stats.c:186 msgid "Duration:" msgstr "Trajanje:" #: ../gtk/stats.c:166 msgid "Total" msgstr "Ukupno" #. %1$s is how much we've got, #. %2$s is how much we'll have when done, #. %3$s%% is a percentage of the two #: ../gtk/torrent-cell-renderer.c:59 #, c-format msgid "%1$s of %2$s (%3$s%%)" msgstr "%1$s od %2$s (%3$s%%)" #. %1$s is how much we've got, #. %2$s is the torrent's total size, #. %3$s%% is a percentage of the two, #. %4$s is how much we've uploaded, #. %5$s is our upload-to-download ratio, #. %6$s is the ratio we want to reach before we stop uploading #: ../gtk/torrent-cell-renderer.c:75 #, c-format msgid "%1$s of %2$s (%3$s%%), uploaded %4$s (Ratio: %5$s Goal: %6$s)" msgstr "%1$s od %2$s (%3$s%%), poslano %4$s (Omjer: %5$s Cilj: %6$s)" #. %1$s is how much we've got, #. %2$s is the torrent's total size, #. %3$s%% is a percentage of the two, #. %4$s is how much we've uploaded, #. %5$s is our upload-to-download ratio #: ../gtk/torrent-cell-renderer.c:91 #, c-format msgid "%1$s of %2$s (%3$s%%), uploaded %4$s (Ratio: %5$s)" msgstr "%1$s od %2$s (%3$s%%), poslano %4$s (Omjer: %5$s)" #. %1$s is the torrent's total size, #. %2$s is how much we've uploaded, #. %3$s is our upload-to-download ratio, #. %4$s is the ratio we want to reach before we stop uploading #: ../gtk/torrent-cell-renderer.c:108 #, c-format msgid "%1$s, uploaded %2$s (Ratio: %3$s Goal: %4$s)" msgstr "%1$s, poslano %2$s (Omjer: %3$s Cilj: %4$s)" #. %1$s is the torrent's total size, #. %2$s is how much we've uploaded, #. %3$s is our upload-to-download ratio #: ../gtk/torrent-cell-renderer.c:120 #, c-format msgid "%1$s, uploaded %2$s (Ratio: %3$s)" msgstr "%1$s, poslano %2$s (Omjer: %3$s)" #: ../gtk/torrent-cell-renderer.c:134 msgid "Remaining time unknown" msgstr "Preostalo vrijeme nepoznato" #. time remaining #: ../gtk/torrent-cell-renderer.c:140 #, c-format msgid "%s remaining" msgstr "%s preostalo" #. down speed, down symbol, up speed, up symbol #: ../gtk/torrent-cell-renderer.c:165 #, c-format msgid "%1$s %2$s %3$s %4$s" msgstr "%1$s %2$s %3$s %4$s" #. up speed, up symbol #: ../gtk/torrent-cell-renderer.c:177 #, c-format msgid "%1$s %2$s" msgstr "%1$s %2$s" #: ../gtk/torrent-cell-renderer.c:183 msgid "Stalled" msgstr "Zaustavljeno" #: ../gtk/torrent-cell-renderer.c:216 #, c-format msgid "Verifying local data (%.1f%% tested)" msgstr "Provjera lokalnih podataka (%.1f%% testirano)" #: ../gtk/torrent-cell-renderer.c:246 #, c-format msgid "Tracker gave a warning: \"%s\"" msgstr "Pratitelj je dao upozorenje: \"%s\"" #: ../gtk/torrent-cell-renderer.c:247 #, c-format msgid "Tracker gave an error: \"%s\"" msgstr "Pratitelj je vratio grešku: \"%s\"" #: ../gtk/torrent-cell-renderer.c:248 #, c-format msgid "Error: %s" msgstr "Greška: %s" #. Downloading metadata from 2 peer (s)(50% done) #: ../gtk/torrent-cell-renderer.c:268 #, c-format msgid "Downloading metadata from %1$'d %2$s (%3$d%% done)" msgstr "Preuzimanje meta podataka s %1$'d %2$s (%3$d%% završeno)" #: ../gtk/torrent-cell-renderer.c:270 ../gtk/torrent-cell-renderer.c:279 #: ../gtk/torrent-cell-renderer.c:296 msgid "peer" msgid_plural "peers" msgstr[0] "točka" msgstr[1] "točke" msgstr[2] "točka" #. Downloading from 2 of 3 peer (s) and 2 webseed (s) #: ../gtk/torrent-cell-renderer.c:276 #, c-format msgid "Downloading from %1$'d of %2$'d %3$s and %4$'d %5$s" msgstr "Preuzimanje s %1$'d od %2$'d %3$s i %4$'d %5$s" #: ../gtk/torrent-cell-renderer.c:281 ../gtk/torrent-cell-renderer.c:288 msgid "web seed" msgid_plural "web seeds" msgstr[0] "web djelitelj" msgstr[1] "web djelitelja" msgstr[2] "web djelitelja" #. Downloading from 3 web seed (s) #: ../gtk/torrent-cell-renderer.c:286 #, c-format msgid "Downloading from %1$'d %2$s" msgstr "Preuzimanje s %1$'d %2$s" #. Downloading from 2 of 3 peer (s) #: ../gtk/torrent-cell-renderer.c:293 #, c-format msgid "Downloading from %1$'d of %2$'d %3$s" msgstr "Preuzimanje s %1$'d od %2$'d %3$s" #: ../gtk/torrent-cell-renderer.c:303 #, c-format msgid "Seeding to %1$'d of %2$'d connected peer" msgid_plural "Seeding to %1$'d of %2$'d connected peers" msgstr[0] "Dijeljenje %1$'d od %2$'d povezane točke" msgstr[1] "Dijeljenje %1$'d od %2$'d povezane točke" msgstr[2] "Dijeljenje %1$'d od %2$'d povezanih točaka" #: ../gtk/transmission-gtk.desktop.in.h:2 msgid "BitTorrent Client" msgstr "BitTorrent klijent" #: ../gtk/transmission-gtk.desktop.in.h:3 msgid "Transmission BitTorrent Client" msgstr "Transmission BitTorrent klijent" #: ../gtk/transmission-gtk.desktop.in.h:4 msgid "Download and share files over BitTorrent" msgstr "Preuzimajte i dijelite datoteke preko BitTorrenta" #: ../gtk/transmission-gtk.desktop.in.h:5 msgid "Start Transmission with All Torrents Paused" msgstr "Pokreni Transmission sa svim torentima pauziranim" #: ../gtk/transmission-gtk.desktop.in.h:6 msgid "Start Transmission Minimized" msgstr "Pokreni Trasmission smanjen" #: ../gtk/tr-core.c:1218 #, c-format msgid "Couldn't read \"%s\": %s" msgstr "Nije moguće pročitati \"%s\": %s" #: ../gtk/tr-core.c:1314 #, c-format msgid "Skipping unknown torrent \"%s\"" msgstr "Preskakanje nepoznator torrenta \"%s\"" #: ../gtk/tr-core.c:1568 msgid "Inhibiting desktop hibernation" msgstr "Spriječavanje hibernacije radne površine" #: ../gtk/tr-core.c:1572 #, c-format msgid "Couldn't inhibit desktop hibernation: %s" msgstr "Spriječavanje hibernacije radne površine nije uspjelo: %s" #: ../gtk/tr-core.c:1606 msgid "Allowing desktop hibernation" msgstr "Dopuštanje hibernacije radne površine" #: ../gtk/tr-icon.c:61 msgid "Idle" msgstr "U pripravi" #: ../gtk/tr-icon.c:78 ../gtk/tr-icon.c:94 #, c-format msgid " (Limit: %s)" msgstr " (Ograničenje: %s)" #. %1$s: current upload speed #. * %2$s: current upload limit, if any #. * %3$s: current download speed #. * %4$s: current download limit, if any #: ../gtk/tr-icon.c:101 #, c-format msgid "" "Transmission\n" "Up: %1$s %2$s\n" "Down: %3$s %4$s" msgstr "" "Transmission\n" "Slanje: %1$s %2$s\n" "Preuzimanje: %3$s %4$s" #: ../gtk/tr-prefs.c:279 msgctxt "Gerund" msgid "Adding" msgstr "Dodavanje" #: ../gtk/tr-prefs.c:281 msgid "Automatically add .torrent files _from:" msgstr "Automatski dodaj .torrent datoteku _s:" #: ../gtk/tr-prefs.c:288 msgid "Show the Torrent Options _dialog" msgstr "Prikaži dijalog mogućnosti _torrenta" #: ../gtk/tr-prefs.c:292 msgid "_Start added torrents" msgstr "_Pokreni dodane torrente" #: ../gtk/tr-prefs.c:301 msgid "Save to _Location:" msgstr "Spremi u _lokaciju:" #: ../gtk/tr-prefs.c:308 msgid "Download Queue" msgstr "Preuzmi red čekanja" #: ../gtk/tr-prefs.c:310 msgid "Ma_ximum active downloads:" msgstr "Na_jviše aktivnih preuzimanja:" #: ../gtk/tr-prefs.c:314 msgid "Downloads sharing data in the last _N minutes are active:" msgstr "Preuzimanja dijeljenja podataka u zadnjih _N minuta je aktivno:" #: ../gtk/tr-prefs.c:319 ../libtransmission/torrent.c:2011 msgid "Incomplete" msgstr "Nepotpuno" #: ../gtk/tr-prefs.c:321 msgid "Append \"._part\" to incomplete files' names" msgstr "Dodaj \"._part\" na kraju naziva nepreuzetih datoteka" #: ../gtk/tr-prefs.c:325 msgid "Keep _incomplete torrents in:" msgstr "Zadrži _nedovršene torrente u:" #: ../gtk/tr-prefs.c:332 msgid "Call scrip_t when torrent is completed:" msgstr "Pozovi skrip_tu kad se torrent preuzme:" #: ../gtk/tr-prefs.c:356 msgid "Limits" msgstr "Ograničenja" #: ../gtk/tr-prefs.c:358 msgid "Stop seeding at _ratio:" msgstr "Zaustavi dijeljenje pri _omjeru:" #: ../gtk/tr-prefs.c:365 msgid "Stop seeding if idle for _N minutes:" msgstr "Zustavi dijeljenje kod _N minuta neaktivnosti:" #: ../gtk/tr-prefs.c:388 ../gtk/tr-prefs.c:1329 msgid "Desktop" msgstr "Radna površina" #: ../gtk/tr-prefs.c:390 msgid "_Inhibit hibernation when torrents are active" msgstr "_Spriječi hibernaciju kada su torrenti aktivni" #: ../gtk/tr-prefs.c:394 msgid "Show Transmission icon in the _notification area" msgstr "Prikaži Transmissionovu ikonu u _traci sustava" #: ../gtk/tr-prefs.c:399 msgid "Notification" msgstr "Obavijest" #: ../gtk/tr-prefs.c:401 msgid "Show a notification when torrents are a_dded" msgstr "Prikaži obavijest kada su novi torrenti _dodani" #: ../gtk/tr-prefs.c:405 msgid "Show a notification when torrents _finish" msgstr "Prikaži obavijest kada se torrent _preuzme" #: ../gtk/tr-prefs.c:409 msgid "Play a _sound when torrents finish" msgstr "Reproduciraj _zvuk kada se torrent preuzme" #: ../gtk/tr-prefs.c:437 #, c-format msgid "Blocklist contains %'d rule" msgid_plural "Blocklist contains %'d rules" msgstr[0] "Popis blokiranja sadrži %'d pravilo" msgstr[1] "Popis blokiranja sadrži %'d pravila" msgstr[2] "Popis blokiranja sadrži %'d pravila" #: ../gtk/tr-prefs.c:471 #, c-format msgid "Blocklist has %'d rule." msgid_plural "Blocklist has %'d rules." msgstr[0] "Popis blokiranja ima %'d pravilo" msgstr[1] "Popis blokiranja ima %'d pravila" msgstr[2] "Popis blokiranja ima %'d pravila" #: ../gtk/tr-prefs.c:475 msgid "Update succeeded!" msgstr "Nadopunjavanje uspjelo!" #: ../gtk/tr-prefs.c:475 msgid "Unable to update." msgstr "Nemoguće nadopuniti." #: ../gtk/tr-prefs.c:490 msgid "Update Blocklist" msgstr "Nadopuni popis blokiranih" #: ../gtk/tr-prefs.c:492 msgid "Getting new blocklist…" msgstr "Preuzimanje novog popisa blokiranja..." #: ../gtk/tr-prefs.c:520 msgid "Allow encryption" msgstr "Dopusti šifriranje" #: ../gtk/tr-prefs.c:521 msgid "Prefer encryption" msgstr "Preferiraj šifriranje" #: ../gtk/tr-prefs.c:522 msgid "Require encryption" msgstr "Zahtijevaj šifriranje" #: ../gtk/tr-prefs.c:546 ../gtk/tr-prefs.c:1325 msgid "Privacy" msgstr "Privatnost" #: ../gtk/tr-prefs.c:548 msgid "_Encryption mode:" msgstr "_Način šifriranja:" #: ../gtk/tr-prefs.c:553 msgid "Blocklist" msgstr "Popis blokiranih" #: ../gtk/tr-prefs.c:555 msgid "Enable _blocklist:" msgstr "Omogući _popis blokiranih:" #: ../gtk/tr-prefs.c:569 msgid "_Update" msgstr "_Nadopuni" #: ../gtk/tr-prefs.c:579 msgid "Enable _automatic updates" msgstr "Omogući _automatsku nadopunu" #: ../gtk/tr-prefs.c:797 msgid "Remote Control" msgstr "Udaljeno upravljanje" #. "enabled" checkbutton #: ../gtk/tr-prefs.c:800 msgid "Allow _remote access" msgstr "Dopusti _udaljeni pristup" #: ../gtk/tr-prefs.c:806 msgid "_Open web client" msgstr "_Otvori web klijent" #: ../gtk/tr-prefs.c:815 msgid "HTTP _port:" msgstr "HTTP _ulaz:" #. require authentication #: ../gtk/tr-prefs.c:819 msgid "Use _authentication" msgstr "Koristi _ovjeru" #. username #: ../gtk/tr-prefs.c:827 msgid "_Username:" msgstr "_Korisničko ime:" #. password #: ../gtk/tr-prefs.c:834 msgid "Pass_word:" msgstr "Loz_inka:" #. require authentication #: ../gtk/tr-prefs.c:842 msgid "Only allow these IP a_ddresses:" msgstr "Dopusti samo ove IP a_drese:" #: ../gtk/tr-prefs.c:867 msgid "IP addresses may use wildcards, such as 192.168.*.*" msgstr "IP adrese mogu koristiti višeznačnike, poput 192.168.*.*" #: ../gtk/tr-prefs.c:889 msgid "Addresses:" msgstr "Adrese:" #: ../gtk/tr-prefs.c:1001 msgid "Every Day" msgstr "Svaki dan" #: ../gtk/tr-prefs.c:1002 msgid "Weekdays" msgstr "Radnim danom" #: ../gtk/tr-prefs.c:1003 msgid "Weekends" msgstr "Vikendom" #: ../gtk/tr-prefs.c:1004 msgid "Sunday" msgstr "Nedjelja" #: ../gtk/tr-prefs.c:1005 msgid "Monday" msgstr "Ponedjeljak" #: ../gtk/tr-prefs.c:1006 msgid "Tuesday" msgstr "Utorak" #: ../gtk/tr-prefs.c:1007 msgid "Wednesday" msgstr "Srijeda" #: ../gtk/tr-prefs.c:1008 msgid "Thursday" msgstr "Četvrtak" #: ../gtk/tr-prefs.c:1009 msgid "Friday" msgstr "Petak" #: ../gtk/tr-prefs.c:1010 msgid "Saturday" msgstr "Subota" #: ../gtk/tr-prefs.c:1041 msgid "Speed Limits" msgstr "Ograničenja brzine" #: ../gtk/tr-prefs.c:1043 #, c-format msgid "_Upload (%s):" msgstr "_Slanje (%s):" #: ../gtk/tr-prefs.c:1050 #, c-format msgid "_Download (%s):" msgstr "_Preuzimanje (%s):" #: ../gtk/tr-prefs.c:1059 msgid "Alternative Speed Limits" msgstr "Alternativna ograničenja brzine" #: ../gtk/tr-prefs.c:1068 msgid "Override normal speed limits manually or at scheduled times" msgstr "Premosti normalna ograničenja brzine ručno ili u zakazana vremena" #: ../gtk/tr-prefs.c:1075 #, c-format msgid "U_pload (%s):" msgstr "Sla_nje (%s):" #: ../gtk/tr-prefs.c:1079 #, c-format msgid "Do_wnload (%s):" msgstr "Pre_uzimanje (%s):" #: ../gtk/tr-prefs.c:1083 msgid "_Scheduled times:" msgstr "_Zakazana vremena:" #: ../gtk/tr-prefs.c:1088 msgid " _to " msgstr " _prema " #: ../gtk/tr-prefs.c:1099 msgid "_On days:" msgstr "_Dana:" #: ../gtk/tr-prefs.c:1131 ../gtk/tr-prefs.c:1199 ../gtk/tr-prefs.c:1280 msgid "Status unknown" msgstr "Nepoznato stanje" #: ../gtk/tr-prefs.c:1154 msgid "Port is open" msgstr "Ulaz je otvoren" #: ../gtk/tr-prefs.c:1154 msgid "Port is closed" msgstr "Ulaz je zatvoren" #: ../gtk/tr-prefs.c:1169 msgid "Testing TCP port…" msgstr "Testiranje TCP ulaza…" #: ../gtk/tr-prefs.c:1192 msgid "Listening Port" msgstr "Ulaz osluškivanja" #: ../gtk/tr-prefs.c:1194 msgid "_Port used for incoming connections:" msgstr "_Ulaz za dolazna povezivanja:" #: ../gtk/tr-prefs.c:1202 msgid "Te_st Port" msgstr "Te_stiraj ulaz" #: ../gtk/tr-prefs.c:1209 msgid "Pick a _random port every time Transmission is started" msgstr "Odaberi _naizmjenični ulaz svaki put kad se Transmission pokrene" #: ../gtk/tr-prefs.c:1213 msgid "Use UPnP or NAT-PMP port _forwarding from my router" msgstr "Koristi UPnP ili NAT-PMP _proslijeđivanje ulaza od mojeg usmjernika" #: ../gtk/tr-prefs.c:1218 msgid "Peer Limits" msgstr "Ograničenja čvorova" #: ../gtk/tr-prefs.c:1221 msgid "Maximum peers per _torrent:" msgstr "Najviše točaka po _torrentu:" #: ../gtk/tr-prefs.c:1223 msgid "Maximum peers _overall:" msgstr "_Ukupno najviše točaka:" #: ../gtk/tr-prefs.c:1229 msgid "Enable _uTP for peer communication" msgstr "Omogući _uTP za komunikaciju sa čvorovima" #: ../gtk/tr-prefs.c:1231 msgid "uTP is a tool for reducing network congestion." msgstr "uTP je alat za smanjenje zagušenja mrežnog prometa." #: ../gtk/tr-prefs.c:1236 msgid "Use PE_X to find more peers" msgstr "Koristi PE_X za pronalaženje dodatnih točaka" #: ../gtk/tr-prefs.c:1238 msgid "" "PEX is a tool for exchanging peer lists with the peers you're connected to." msgstr "" "PEX je alat za razmjenu popisa točaka s točkama na koje ste povezani." #: ../gtk/tr-prefs.c:1242 msgid "Use _DHT to find more peers" msgstr "Koristi _DHT za pronalaženje dodatnih točaka" #: ../gtk/tr-prefs.c:1244 msgid "DHT is a tool for finding peers without a tracker." msgstr "DHT je alat za pronalaženje točaka bez pratitelja." #: ../gtk/tr-prefs.c:1248 msgid "Use _Local Peer Discovery to find more peers" msgstr "Koristi _Local Peer Discovery za pronalazak više točaka" #: ../gtk/tr-prefs.c:1250 msgid "LPD is a tool for finding peers on your local network." msgstr "LPD je alat za pronalazak točaka u vašoj lokalnoj mreži." #: ../gtk/tr-prefs.c:1305 msgid "Transmission Preferences" msgstr "Osobitosti Transmissiona" #: ../gtk/tr-prefs.c:1321 msgctxt "Gerund" msgid "Downloading" msgstr "Preuzimanje" #: ../gtk/tr-prefs.c:1323 msgctxt "Gerund" msgid "Seeding" msgstr "Dijeljenje" #: ../gtk/tr-prefs.c:1327 msgid "Network" msgstr "Mreža" #: ../gtk/tr-prefs.c:1331 msgid "Remote" msgstr "Udaljeni pristup" #: ../gtk/tr-window.c:141 msgid "Torrent" msgstr "Torrent" #: ../gtk/tr-window.c:251 msgid "Total Ratio" msgstr "Ukupni omjer" #: ../gtk/tr-window.c:252 msgid "Session Ratio" msgstr "Omjer sesije" #: ../gtk/tr-window.c:253 msgid "Total Transfer" msgstr "Ukupni prijenos" #: ../gtk/tr-window.c:254 msgid "Session Transfer" msgstr "Prijenos sesije" #: ../gtk/tr-window.c:282 #, c-format msgid "" "Click to disable Alternative Speed Limits\n" " (%1$s down, %2$s up)" msgstr "" "Kliknite za onemogućavanje alternativnog ograničenja brzine\n" " (%1$s preuzimanje, %2$s slanje)" #: ../gtk/tr-window.c:283 #, c-format msgid "" "Click to enable Alternative Speed Limits\n" " (%1$s down, %2$s up)" msgstr "" "Kliknite za omogućavanje alternativnog ograničenja brzine\n" " (%1$s preuzimanje, %2$s slanje)" #: ../gtk/tr-window.c:349 #, c-format msgid "Tracker will allow requests in %s" msgstr "Pratitelj će dopustiti zahtjeve za %s" #: ../gtk/tr-window.c:424 msgid "Unlimited" msgstr "Neograničeno" #: ../gtk/tr-window.c:497 msgid "Seed Forever" msgstr "Dijeli zauvijek" #: ../gtk/tr-window.c:536 msgid "Limit Download Speed" msgstr "Ograniči brzinu preuzimanja" #: ../gtk/tr-window.c:540 msgid "Limit Upload Speed" msgstr "Ograniči brzinu slanja" #: ../gtk/tr-window.c:547 msgid "Stop Seeding at Ratio" msgstr "Zaustavi dijeljenje pri omjeru" #: ../gtk/tr-window.c:581 #, c-format msgid "Stop at Ratio (%s)" msgstr "Zaustavi pri omjeru (%s)" #: ../gtk/tr-window.c:804 ../gtk/tr-window.c:832 #, c-format msgid "Ratio: %s" msgstr "Omjer: %s" #: ../gtk/tr-window.c:815 #, c-format msgid "Down: %1$s, Up: %2$s" msgstr "Preuzimanje: %1$s, Slanje: %2$s" #: ../gtk/tr-window.c:826 #, c-format msgid "size|Down: %1$s, Up: %2$s" msgstr "veličina|Preuzimanje: %1$s, Slanje: %2$s" #: ../gtk/util.c:36 msgid "KiB" msgstr "KiB" #: ../gtk/util.c:37 msgid "MiB" msgstr "MiB" #: ../gtk/util.c:38 msgid "GiB" msgstr "GiB" #: ../gtk/util.c:39 msgid "TiB" msgstr "TiB" #: ../gtk/util.c:42 msgid "kB" msgstr "kB" #: ../gtk/util.c:43 msgid "MB" msgstr "MB" #: ../gtk/util.c:44 msgid "GB" msgstr "GB" #: ../gtk/util.c:45 msgid "TB" msgstr "TB" #: ../gtk/util.c:48 msgid "kB/s" msgstr "kB/s" #: ../gtk/util.c:49 msgid "MB/s" msgstr "MB/s" #: ../gtk/util.c:50 msgid "GB/s" msgstr "GB/s" #: ../gtk/util.c:51 msgid "TB/s" msgstr "TB/s" #: ../gtk/util.c:107 #, c-format msgid "%'d day" msgid_plural "%'d days" msgstr[0] "%'d dan" msgstr[1] "%'d dana" msgstr[2] "%'d dana" #: ../gtk/util.c:108 #, c-format msgid "%'d hour" msgid_plural "%'d hours" msgstr[0] "%'d sat" msgstr[1] "%'d sata" msgstr[2] "%'d sati" #: ../gtk/util.c:109 #, c-format msgid "%'d minute" msgid_plural "%'d minutes" msgstr[0] "%'d minute" msgstr[1] "%'d minute" msgstr[2] "%'d minuta" #: ../gtk/util.c:110 #, c-format msgid "%'d second" msgid_plural "%'d seconds" msgstr[0] "%'d sekunde" msgstr[1] "%'d sekunde" msgstr[2] "%'d sekundi" #: ../gtk/util.c:228 #, c-format msgid "The torrent file \"%s\" contains invalid data." msgstr "Torrent datoteka \"%s\" sadrži nevažeće podatke." #: ../gtk/util.c:230 #, c-format msgid "The torrent file \"%s\" is already in use by \"%s.\"" msgstr "Torrent datoteku \"%s\" već koristi \"%s.\"" #: ../gtk/util.c:232 #, c-format msgid "The torrent file \"%s\" encountered an unknown error." msgstr "Torrent datoteka \"%s\" se susrela s nepoznatom greškom." #: ../gtk/util.c:238 msgid "Error opening torrent" msgstr "Greška pri otvaranju torrenta" #: ../gtk/util.c:543 #, c-format msgid "Error opening \"%s\"" msgstr "Greška pri otvaranju \"%s\"" #: ../gtk/util.c:546 #, c-format msgid "Server returned \"%1$ld %2$s\"" msgstr "Poslužitelj je vratio \"%1$ld %2$s\"" #: ../gtk/util.c:566 msgid "Unrecognized URL" msgstr "Nepoznat URL" #: ../gtk/util.c:568 #, c-format msgid "Transmission doesn't know how to use \"%s\"" msgstr "Transmission ne zna kako koristiti \"%s\"" #: ../gtk/util.c:573 #, c-format msgid "" "This magnet link appears to be intended for something other than BitTorrent. " "BitTorrent magnet links have a section containing \"%s\"." msgstr "" "Čini se da je ova magnetna poveznica namijenjena za nešto drugo, a ne za " "BitTorrent. BitTorrent magnetne poveznice imaju dio koji sadrži \"%s\"." #: ../gtk/util.c:693 #, c-format msgid "%s free" msgstr "%s slobodno" #: ../libtransmission/announcer.c:1060 ../libtransmission/announcer.c:1353 msgid "Could not connect to tracker" msgstr "Neuspješno povezivanje s pratiteljem" #: ../libtransmission/announcer.c:1064 ../libtransmission/announcer.c:1357 msgid "Tracker did not respond" msgstr "Pratitelj ne odgovara" #: ../libtransmission/announcer.c:1126 msgid "Success" msgstr "Uspješno" #: ../libtransmission/announcer-http.c:205 #: ../libtransmission/announcer-http.c:355 #, c-format msgid "Tracker gave HTTP response code %1$ld (%2$s)" msgstr "Pratitelj vraća HTTP kôd odgovora %1$ld (%2$s)" #: ../libtransmission/announcer-udp.c:263 #: ../libtransmission/announcer-udp.c:413 msgid "Unknown error" msgstr "Nepoznata greška" #: ../libtransmission/announcer-udp.c:502 #, c-format msgid "DNS Lookup failed: %s" msgstr "DNS pretraga neuspjela: %s" #: ../libtransmission/announcer-udp.c:603 msgid "Connection failed" msgstr "Neuspješno povezivanje" #: ../libtransmission/blocklist.c:85 ../libtransmission/blocklist.c:322 #: ../libtransmission/utils.c:226 #, c-format msgid "Couldn't read \"%1$s\": %2$s" msgstr "Nemoguće očitati \"%1$s\": %2$s" #: ../libtransmission/blocklist.c:113 msgid "Blocklist \"%s\" contains %" msgstr "Popis blokiranih \"%s\" sadrži %" #. don't try to display the actual lines - it causes issues #: ../libtransmission/blocklist.c:365 #, c-format msgid "blocklist skipped invalid address at line %d" msgstr "popis blokiranja preskočio neispravnu adresu u retku %d" #: ../libtransmission/blocklist.c:415 ../libtransmission/rpcimpl.c:1513 #: ../libtransmission/rpcimpl.c:1526 ../libtransmission/rpcimpl.c:1543 #: ../libtransmission/variant.c:1219 #, c-format msgid "Couldn't save file \"%1$s\": %2$s" msgstr "Nemoguće spremiti datoteku \"%1$s\": %2$s" #: ../libtransmission/blocklist.c:420 msgid "Blocklist \"%s\" updated with %" msgstr "Popis blokiranih \"%s\" je nadopunjen s %" #: ../libtransmission/fdlimit.c:345 ../libtransmission/utils.c:424 #: ../libtransmission/utils.c:434 #, c-format msgid "Couldn't create \"%1$s\": %2$s" msgstr "Nemoguće stvoriti \"%1$s\": %2$s" #: ../libtransmission/fdlimit.c:370 #, c-format msgid "Couldn't open \"%1$s\": %2$s" msgstr "Nemoguće otvoriti \"%1$s\": %2$s" #: ../libtransmission/fdlimit.c:383 #, c-format msgid "Couldn't truncate \"%1$s\": %2$s" msgstr "Nije moguće isprazniti \"%1$s\": %2$s" #: ../libtransmission/fdlimit.c:671 #, c-format msgid "Couldn't create socket: %s" msgstr "Neuspjelo stvaranje utičnice: %s" #: ../libtransmission/makemeta.c:61 #, c-format msgid "Torrent Creator is skipping file \"%s\": %s" msgstr "Stvaratelj torrenta preskače datoteku \"%s\": %s" #: ../libtransmission/metainfo.c:585 #, c-format msgid "Invalid metadata entry \"%s\"" msgstr "Nevažeći unos metapodatka \"%s\"" #: ../libtransmission/natpmp.c:30 msgid "Port Forwarding (NAT-PMP)" msgstr "Proslijeđivanje ulaza (NAT-PMP)" #: ../libtransmission/natpmp.c:70 #, c-format msgid "%s succeeded (%d)" msgstr "%s uspjelo (%d)" #: ../libtransmission/natpmp.c:139 #, c-format msgid "Found public address \"%s\"" msgstr "Pronađena javna adresa \"%s\"" #: ../libtransmission/natpmp.c:174 #, c-format msgid "no longer forwarding port %d" msgstr "više se ne proslijeđuje ulaz %d" #: ../libtransmission/natpmp.c:219 #, c-format msgid "Port %d forwarded successfully" msgstr "Ulaz %d uspješno proslijeđen" #: ../libtransmission/net.c:269 #, c-format msgid "Couldn't set source address %s on %d: %s" msgstr "Neuspjelo postavljanje adrese izvora %s na %d: %s" #: ../libtransmission/net.c:286 #, c-format msgid "Couldn't connect socket %d to %s, port %d (errno %d - %s)" msgstr "Nemoguće povezati priključnicu %d na %s, ulaz %d (errno %d - %s)" #: ../libtransmission/net.c:362 msgid "Is another copy of Transmission already running?" msgstr "Je li druga kopija Transmissiona već pokrenuta?" #: ../libtransmission/net.c:367 #, c-format msgid "Couldn't bind port %d on %s: %s" msgstr "Nemoguće dodijeliti ulaz %d na %s: %s" #: ../libtransmission/net.c:369 #, c-format msgid "Couldn't bind port %d on %s: %s (%s)" msgstr "Nemoguće dodijeliti ulaz %d na %s: %s (%s)" #: ../libtransmission/peer-msgs.c:2039 msgid "Please Verify Local Data! Piece #%" msgstr "Potvrdite lokalne podatke! Dio #%" #: ../libtransmission/platform.c:405 #, c-format msgid "Searching for web interface file \"%s\"" msgstr "Pretraživanje datoteke web sučelja \"%s\"" #: ../libtransmission/port-forwarding.c:29 msgid "Port Forwarding" msgstr "Proslijeđivanje ulaza" #: ../libtransmission/port-forwarding.c:56 msgid "Starting" msgstr "Pokretanje" #: ../libtransmission/port-forwarding.c:57 msgid "Forwarded" msgstr "Proslijeđeno" #: ../libtransmission/port-forwarding.c:58 msgid "Stopping" msgstr "Zaustavljanje" #: ../libtransmission/port-forwarding.c:59 msgid "Not forwarded" msgstr "Nije proslijeđeno" #: ../libtransmission/port-forwarding.c:90 ../libtransmission/torrent.c:2159 #, c-format msgid "State changed from \"%1$s\" to \"%2$s\"" msgstr "Status izmijenjen iz \"%1$s\" u \"%2$s\"" #: ../libtransmission/port-forwarding.c:180 msgid "Stopped" msgstr "Zaustavljeno" #: ../libtransmission/rpcimpl.c:1534 #, c-format msgid "Error uncompressing blocklist: %s (%d)" msgstr "Greška raspakiravanja popisa blokiranih: %s (%d)" #: ../libtransmission/rpc-server.c:949 #, c-format msgid "Couldn't find settings key \"%s\"" msgstr "Neuspjeli pronalazak postavke ključa \"%s\"" #: ../libtransmission/rpc-server.c:1021 #, c-format msgid "%s is not a valid address" msgstr "%s nije valjana adresa" #: ../libtransmission/rpc-server.c:1026 #, c-format msgid "%s is not an IPv4 address. RPC listeners must be IPv4" msgstr "%s nije IPv4 adresa. RPC osluškivač mora biti IPv4" #: ../libtransmission/rpc-server.c:1033 #, c-format msgid "Serving RPC and Web requests on port 127.0.0.1:%d%s" msgstr "Poslužujem RPC i Web zahtjev na ulazu 127.0.0.1:%d%s" #: ../libtransmission/rpc-server.c:1037 msgid "Whitelist enabled" msgstr "Popis dozvoljenih omogućen" #: ../libtransmission/rpc-server.c:1040 msgid "Password required" msgstr "Potrebna je lozinka" #. first %s is the application name #. second %s is the version number #: ../libtransmission/session.c:736 #, c-format msgid "%s %s started" msgstr "%s %s pokrenuto" #: ../libtransmission/session.c:1992 #, c-format msgid "Loaded %d torrents" msgstr "Učitano %d torrenata" #: ../libtransmission/torrent.c:573 #, c-format msgid "Tracker warning: \"%s\"" msgstr "Upozorenje pratitelja: \"%s\"" #: ../libtransmission/torrent.c:580 #, c-format msgid "Tracker error: \"%s\"" msgstr "Greška pratitelja: \"%s\"" #: ../libtransmission/torrent.c:844 msgid "" "No data found! Ensure your drives are connected or use \"Set Location\". To " "re-download, remove the torrent and re-add it." msgstr "" "Podaci nisu pronađeni! Provjerite jesu li vaši uređaji spojeni ili " "upotrijebite mogućnost \"Postavi lokaciju\". Kako bi ponovili preuzimanje, " "uklonite torrent i ponovno ga dodajte." #: ../libtransmission/torrent.c:1733 msgid "Restarted manually -- disabling its seed ratio" msgstr "Ponovno pokrenuto ručno -- onemogućavanje omjera dijeljenja" #: ../libtransmission/torrent.c:1916 msgid "Removing torrent" msgstr "Uklanjanje torrenta" #: ../libtransmission/torrent.c:2005 msgid "Done" msgstr "Gotovo" #: ../libtransmission/torrent.c:2008 msgid "Complete" msgstr "Završeno" #: ../libtransmission/torrent.c:3259 #, c-format msgid "Piece %, which was just downloaded, failed its checksum test" msgstr "" "Dijelić %, koji je upravo preuzet, neuspio test kontrolnog zbroja" #: ../libtransmission/torrent-magnet.c:273 msgid "Magnet torrent's metadata is not usable" msgstr "Meta podaci magnetnih torrenta nisu upotrebljivi" #: ../libtransmission/upnp.c:29 msgid "Port Forwarding (UPnP)" msgstr "Prosljeđivanje ulaza (UPnP)" #: ../libtransmission/upnp.c:222 #, c-format msgid "Found Internet Gateway Device \"%s\"" msgstr "Pronađen Internet usmjernik \"%s\"" #: ../libtransmission/upnp.c:225 #, c-format msgid "Local Address is \"%s\"" msgstr "Lokalna adresa je \"%s\"" #: ../libtransmission/upnp.c:254 #, c-format msgid "Port %d isn't forwarded" msgstr "Ulaz %d nije proslijeđen" #: ../libtransmission/upnp.c:265 #, c-format msgid "Stopping port forwarding through \"%s\", service \"%s\"" msgstr "Zaustavljanje proslijeđivanja ulaza kroz \"%s\", usluga \"%s\"" #: ../libtransmission/upnp.c:298 #, c-format msgid "" "Port forwarding through \"%s\", service \"%s\". (local address: %s:%d)" msgstr "" "Proslijeđivanje ulaza kroz \"%s\", usluga \"%s\". (lokalna adresa: %s:%d)" #: ../libtransmission/upnp.c:303 msgid "Port forwarding successful!" msgstr "Prosljeđivanje ulaza uspješno!" #: ../libtransmission/utils.c:240 msgid "Not a regular file" msgstr "Nije regularna datoteka" #: ../libtransmission/utils.c:258 msgid "Memory allocation failed" msgstr "Dodijeljivanje memorije neuspjelo" #. Node exists but isn't a folder #: ../libtransmission/utils.c:433 #, c-format msgid "File \"%s\" is in the way" msgstr "Smeta datoteka \"%s\"" #. did caller give us an uninitialized val? #: ../libtransmission/variant.c:889 msgid "Invalid metadata" msgstr "Nevažeći metapodaci" #: ../libtransmission/variant.c:1204 ../libtransmission/variant.c:1227 #, c-format msgid "Couldn't save temporary file \"%1$s\": %2$s" msgstr "Nemoguće spremiti privremenu datoteku \"%1$s\": %2$s" #: ../libtransmission/variant.c:1214 #, c-format msgid "Saved \"%s\"" msgstr "Spremljeno \"%s\"" #: ../libtransmission/verify.c:219 msgid "Verifying torrent" msgstr "Provjera torrenta" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/gimp20-script-fu.po0000644000000000000000000024216712704126313021557 0ustar # Translation of gimp-script-fu to Croatiann # Copyright (C) Croatiann team # Translators: Automatski Prijevod <>,Denis Lackovic ,Ivan Jankovic ,Nikola Planinac <>,pr pr ,Robert Sedak , msgid "" msgstr "" "Project-Id-Version: gimp-script-fu 0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2015-12-21 19:15+0000\n" "PO-Revision-Date: 2015-12-22 07:24+0000\n" "Last-Translator: Launchpad Translations Administrators \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 05:23+0000\n" "X-Generator: Launchpad (build 17995)\n" "Language: hr\n" #: ../plug-ins/script-fu/script-fu.c:111 msgid "Interactive console for Script-Fu development" msgstr "" #: ../plug-ins/script-fu/script-fu.c:117 msgid "_Console" msgstr "" #: ../plug-ins/script-fu/script-fu.c:141 msgid "Server for remote Script-Fu operation" msgstr "" #: ../plug-ins/script-fu/script-fu.c:151 msgid "_Start Server..." msgstr "" #: ../plug-ins/script-fu/script-fu.c:307 msgid "_GIMP Online" msgstr "" #: ../plug-ins/script-fu/script-fu.c:308 msgid "_User Manual" msgstr "" #: ../plug-ins/script-fu/script-fu.c:311 msgid "_Script-Fu" msgstr "" #: ../plug-ins/script-fu/script-fu.c:313 msgid "_Test" msgstr "" #: ../plug-ins/script-fu/script-fu.c:316 msgid "_Buttons" msgstr "" #: ../plug-ins/script-fu/script-fu.c:318 msgid "_Logos" msgstr "" #: ../plug-ins/script-fu/script-fu.c:320 msgid "_Patterns" msgstr "" #: ../plug-ins/script-fu/script-fu.c:323 msgid "_Web Page Themes" msgstr "" #: ../plug-ins/script-fu/script-fu.c:325 msgid "_Alien Glow" msgstr "" #: ../plug-ins/script-fu/script-fu.c:327 msgid "_Beveled Pattern" msgstr "" #: ../plug-ins/script-fu/script-fu.c:329 msgid "_Classic.Gimp.Org" msgstr "" #: ../plug-ins/script-fu/script-fu.c:332 msgid "Alpha to _Logo" msgstr "" #: ../plug-ins/script-fu/script-fu.c:335 msgid "Re-read all available Script-Fu scripts" msgstr "" #: ../plug-ins/script-fu/script-fu.c:340 msgid "_Refresh Scripts" msgstr "" #: ../plug-ins/script-fu/script-fu.c:363 msgid "" "You can not use \"Refresh Scripts\" while a Script-Fu dialog box is open. " "Please close all Script-Fu windows and try again." msgstr "" #: ../plug-ins/script-fu/script-fu-console.c:130 #: ../plug-ins/script-fu/script-fu-console.c:197 msgid "Script-Fu Console" msgstr "Script-Fu Konzola" #: ../plug-ins/script-fu/script-fu-console.c:193 msgid "Welcome to TinyScheme" msgstr "" #: ../plug-ins/script-fu/script-fu-console.c:199 msgid "Interactive Scheme Development" msgstr "" #: ../plug-ins/script-fu/script-fu-console.c:235 msgid "_Browse..." msgstr "" #: ../plug-ins/script-fu/script-fu-console.c:293 msgid "Save Script-Fu Console Output" msgstr "" #: ../plug-ins/script-fu/script-fu-console.c:340 #, c-format msgid "Could not open '%s' for writing: %s" msgstr "" #: ../plug-ins/script-fu/script-fu-console.c:369 msgid "Script-Fu Procedure Browser" msgstr "" #: ../plug-ins/script-fu/script-fu-eval.c:60 msgid "Script-Fu evaluation mode only allows non-interactive invocation" msgstr "" #: ../plug-ins/script-fu/script-fu-interface.c:198 msgid "Script-Fu cannot process two scripts at the same time." msgstr "" #: ../plug-ins/script-fu/script-fu-interface.c:200 #, c-format msgid "You are already running the \"%s\" script." msgstr "" #: ../plug-ins/script-fu/script-fu-interface.c:226 #, c-format msgid "Script-Fu: %s" msgstr "Script-Fu: %s" #. we add a colon after the label; #. * some languages want an extra space here #. #: ../plug-ins/script-fu/script-fu-interface.c:290 #, c-format msgid "%s:" msgstr "%s:" #: ../plug-ins/script-fu/script-fu-interface.c:337 msgid "Script-Fu Color Selection" msgstr "Script-Fu odabir boje" #: ../plug-ins/script-fu/script-fu-interface.c:446 msgid "Script-Fu File Selection" msgstr "Script-Fu Odabir Datoteke" #: ../plug-ins/script-fu/script-fu-interface.c:449 msgid "Script-Fu Folder Selection" msgstr "Script-Fu odabir mape" #: ../plug-ins/script-fu/script-fu-interface.c:462 msgid "Script-Fu Font Selection" msgstr "Script-Fu Odabir Fonta" #: ../plug-ins/script-fu/script-fu-interface.c:470 msgid "Script-Fu Palette Selection" msgstr "" #: ../plug-ins/script-fu/script-fu-interface.c:479 msgid "Script-Fu Pattern Selection" msgstr "" #: ../plug-ins/script-fu/script-fu-interface.c:488 msgid "Script-Fu Gradient Selection" msgstr "Script-Fu Odabir Gradijenta" #: ../plug-ins/script-fu/script-fu-interface.c:497 msgid "Script-Fu Brush Selection" msgstr "Script-Fu Odabir Kista" #: ../plug-ins/script-fu/script-fu-interface.c:857 #, c-format msgid "Error while executing %s:" msgstr "" #: ../plug-ins/script-fu/script-fu-scripts.c:146 msgid "Too few arguments to 'script-fu-register' call" msgstr "" #: ../plug-ins/script-fu/script-fu-scripts.c:605 #, c-format msgid "Error while loading %s:" msgstr "" #: ../plug-ins/script-fu/script-fu-server.c:824 msgid "Script-Fu Server Options" msgstr "Script-Fu postavke Servera" #: ../plug-ins/script-fu/script-fu-server.c:829 msgid "_Start Server" msgstr "" #: ../plug-ins/script-fu/script-fu-server.c:862 msgid "Listen on IP:" msgstr "" #: ../plug-ins/script-fu/script-fu-server.c:869 msgid "Server port:" msgstr "" #: ../plug-ins/script-fu/script-fu-server.c:875 msgid "Server logfile:" msgstr "" #: ../plug-ins/script-fu/script-fu-server.c:887 msgid "" "Listening on an IP address other than 127.0.0.1 (especially 0.0.0.0) can " "allow attackers to remotely execute arbitrary code on this machine." msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:120 #: ../plug-ins/script-fu/scripts/3d-outline.scm:166 msgid "3D _Outline..." msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:121 msgid "" "Outline the selected region (or alpha) with a pattern and add a drop shadow" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:128 #: ../plug-ins/script-fu/scripts/3d-outline.scm:172 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:157 #: ../plug-ins/script-fu/scripts/beveled-pattern-bullet.scm:91 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:130 #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:116 #: ../plug-ins/script-fu/scripts/beveled-pattern-hrule.scm:85 #: ../plug-ins/script-fu/scripts/chip-away.scm:155 #: ../plug-ins/script-fu/scripts/chip-away.scm:202 #: ../plug-ins/script-fu/scripts/textured-logo.scm:126 msgid "Pattern" msgstr "Uzorak" #: ../plug-ins/script-fu/scripts/3d-outline.scm:129 #: ../plug-ins/script-fu/scripts/3d-outline.scm:176 msgid "Outline blur radius" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:130 #: ../plug-ins/script-fu/scripts/3d-outline.scm:177 msgid "Shadow blur radius" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:131 #: ../plug-ins/script-fu/scripts/3d-outline.scm:178 msgid "Bumpmap (alpha layer) blur radius" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:132 #: ../plug-ins/script-fu/scripts/3d-outline.scm:179 #: ../plug-ins/script-fu/scripts/glossy.scm:216 #: ../plug-ins/script-fu/scripts/glossy.scm:288 msgid "Default bumpmap settings" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:133 #: ../plug-ins/script-fu/scripts/3d-outline.scm:180 #: ../plug-ins/script-fu/scripts/glossy.scm:218 #: ../plug-ins/script-fu/scripts/glossy.scm:290 #: ../plug-ins/script-fu/scripts/round-corners.scm:139 msgid "Shadow X offset" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:134 #: ../plug-ins/script-fu/scripts/3d-outline.scm:181 #: ../plug-ins/script-fu/scripts/glossy.scm:219 #: ../plug-ins/script-fu/scripts/glossy.scm:291 #: ../plug-ins/script-fu/scripts/round-corners.scm:140 msgid "Shadow Y offset" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:167 msgid "Create a logo with outlined text and a drop shadow" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:173 #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:156 #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:111 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:175 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:98 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:120 #: ../plug-ins/script-fu/scripts/beveled-button.scm:148 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:126 #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:113 #: ../plug-ins/script-fu/scripts/blended-logo.scm:190 #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:131 #: ../plug-ins/script-fu/scripts/carved-logo.scm:168 #: ../plug-ins/script-fu/scripts/chalk.scm:128 #: ../plug-ins/script-fu/scripts/chip-away.scm:192 #: ../plug-ins/script-fu/scripts/chrome-logo.scm:126 #: ../plug-ins/script-fu/scripts/comic-logo.scm:158 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:184 #: ../plug-ins/script-fu/scripts/crystal-logo.scm:216 #: ../plug-ins/script-fu/scripts/frosty-logo.scm:203 #: ../plug-ins/script-fu/scripts/glossy.scm:273 #: ../plug-ins/script-fu/scripts/glowing-logo.scm:115 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:139 #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:98 #: ../plug-ins/script-fu/scripts/neon-logo.scm:286 #: ../plug-ins/script-fu/scripts/news-text.scm:83 #: ../plug-ins/script-fu/scripts/pupi-button.scm:193 #: ../plug-ins/script-fu/scripts/slide.scm:244 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:213 #: ../plug-ins/script-fu/scripts/speed-text.scm:92 #: ../plug-ins/script-fu/scripts/starscape-logo.scm:145 #: ../plug-ins/script-fu/scripts/text-circle.scm:213 #: ../plug-ins/script-fu/scripts/textured-logo.scm:165 #: ../plug-ins/script-fu/scripts/title-header.scm:171 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:144 msgid "Text" msgstr "Tekst" #: ../plug-ins/script-fu/scripts/3d-outline.scm:174 #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:158 #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:112 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:176 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:99 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:121 #: ../plug-ins/script-fu/scripts/beveled-button.scm:149 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:127 #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:114 #: ../plug-ins/script-fu/scripts/blended-logo.scm:191 #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:132 #: ../plug-ins/script-fu/scripts/carved-logo.scm:169 #: ../plug-ins/script-fu/scripts/chalk.scm:129 #: ../plug-ins/script-fu/scripts/chip-away.scm:194 #: ../plug-ins/script-fu/scripts/chrome-logo.scm:127 #: ../plug-ins/script-fu/scripts/comic-logo.scm:159 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:185 #: ../plug-ins/script-fu/scripts/crystal-logo.scm:217 #: ../plug-ins/script-fu/scripts/frosty-logo.scm:204 #: ../plug-ins/script-fu/scripts/glossy.scm:274 #: ../plug-ins/script-fu/scripts/glowing-logo.scm:116 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:140 #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:102 #: ../plug-ins/script-fu/scripts/neon-logo.scm:287 #: ../plug-ins/script-fu/scripts/news-text.scm:85 #: ../plug-ins/script-fu/scripts/pupi-button.scm:194 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:214 #: ../plug-ins/script-fu/scripts/speed-text.scm:94 #: ../plug-ins/script-fu/scripts/starscape-logo.scm:146 #: ../plug-ins/script-fu/scripts/text-circle.scm:217 #: ../plug-ins/script-fu/scripts/textured-logo.scm:166 #: ../plug-ins/script-fu/scripts/title-header.scm:172 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:145 msgid "Font size (pixels)" msgstr "" #: ../plug-ins/script-fu/scripts/3d-outline.scm:175 #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:157 #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:113 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:177 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:100 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:122 #: ../plug-ins/script-fu/scripts/beveled-button.scm:150 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:128 #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:115 #: ../plug-ins/script-fu/scripts/blended-logo.scm:192 #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:133 #: ../plug-ins/script-fu/scripts/carved-logo.scm:170 #: ../plug-ins/script-fu/scripts/chalk.scm:130 #: ../plug-ins/script-fu/scripts/chip-away.scm:193 #: ../plug-ins/script-fu/scripts/chrome-logo.scm:128 #: ../plug-ins/script-fu/scripts/comic-logo.scm:160 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:186 #: ../plug-ins/script-fu/scripts/crystal-logo.scm:218 #: ../plug-ins/script-fu/scripts/frosty-logo.scm:205 #: ../plug-ins/script-fu/scripts/glossy.scm:275 #: ../plug-ins/script-fu/scripts/glowing-logo.scm:117 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:141 #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:101 #: ../plug-ins/script-fu/scripts/neon-logo.scm:288 #: ../plug-ins/script-fu/scripts/news-text.scm:84 #: ../plug-ins/script-fu/scripts/pupi-button.scm:195 #: ../plug-ins/script-fu/scripts/slide.scm:246 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:215 #: ../plug-ins/script-fu/scripts/speed-text.scm:93 #: ../plug-ins/script-fu/scripts/starscape-logo.scm:147 #: ../plug-ins/script-fu/scripts/text-circle.scm:219 #: ../plug-ins/script-fu/scripts/textured-logo.scm:167 #: ../plug-ins/script-fu/scripts/title-header.scm:173 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:146 msgid "Font" msgstr "Pismo" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:225 msgid "3_D Truchet..." msgstr "" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:226 msgid "Create an image filled with a 3D Truchet pattern" msgstr "" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:231 #: ../plug-ins/script-fu/scripts/truchet.scm:171 msgid "Block size" msgstr "" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:232 #: ../plug-ins/script-fu/scripts/add-bevel.scm:193 #: ../plug-ins/script-fu/scripts/truchet.scm:172 msgid "Thickness" msgstr "Gustoća" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:233 #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:184 #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:95 #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:107 #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:161 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:135 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:179 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:67 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:101 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:89 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:123 #: ../plug-ins/script-fu/scripts/blended-logo.scm:135 #: ../plug-ins/script-fu/scripts/blended-logo.scm:194 #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:136 #: ../plug-ins/script-fu/scripts/chalk.scm:89 #: ../plug-ins/script-fu/scripts/chalk.scm:131 #: ../plug-ins/script-fu/scripts/chrome-logo.scm:129 #: ../plug-ins/script-fu/scripts/comic-logo.scm:124 #: ../plug-ins/script-fu/scripts/comic-logo.scm:165 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:149 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:187 #: ../plug-ins/script-fu/scripts/frosty-logo.scm:144 #: ../plug-ins/script-fu/scripts/frosty-logo.scm:206 #: ../plug-ins/script-fu/scripts/glossy.scm:209 #: ../plug-ins/script-fu/scripts/glossy.scm:281 #: ../plug-ins/script-fu/scripts/glowing-logo.scm:85 #: ../plug-ins/script-fu/scripts/glowing-logo.scm:118 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:105 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:144 #: ../plug-ins/script-fu/scripts/neon-logo.scm:253 #: ../plug-ins/script-fu/scripts/neon-logo.scm:289 #: ../plug-ins/script-fu/scripts/news-text.scm:90 #: ../plug-ins/script-fu/scripts/speed-text.scm:97 #: ../plug-ins/script-fu/scripts/swirltile.scm:65 #: ../plug-ins/script-fu/scripts/textured-logo.scm:130 #: ../plug-ins/script-fu/scripts/textured-logo.scm:172 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:111 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:151 #: ../plug-ins/script-fu/scripts/truchet.scm:173 msgid "Background color" msgstr "" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:234 #: ../plug-ins/script-fu/scripts/blended-logo.scm:140 #: ../plug-ins/script-fu/scripts/blended-logo.scm:199 msgid "Start blend" msgstr "" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:235 #: ../plug-ins/script-fu/scripts/blended-logo.scm:141 #: ../plug-ins/script-fu/scripts/blended-logo.scm:200 msgid "End blend" msgstr "" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:236 msgid "Supersample" msgstr "Super Sempliranje" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:237 #: ../plug-ins/script-fu/scripts/truchet.scm:175 msgid "Number of X tiles" msgstr "" #: ../plug-ins/script-fu/scripts/3dTruchet.scm:238 #: ../plug-ins/script-fu/scripts/truchet.scm:176 msgid "Number of Y tiles" msgstr "" #: ../plug-ins/script-fu/scripts/add-bevel.scm:76 #: ../plug-ins/script-fu/scripts/beveled-button.scm:77 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:79 #: ../plug-ins/script-fu/scripts/beveled-pattern-bullet.scm:26 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:57 #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:44 #: ../plug-ins/script-fu/scripts/beveled-pattern-hrule.scm:30 msgid "Bumpmap" msgstr "" #: ../plug-ins/script-fu/scripts/add-bevel.scm:185 msgid "Add B_evel..." msgstr "" #: ../plug-ins/script-fu/scripts/add-bevel.scm:186 msgid "Add a beveled border to an image" msgstr "" #: ../plug-ins/script-fu/scripts/add-bevel.scm:194 #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:160 #: ../plug-ins/script-fu/scripts/old-photo.scm:104 #: ../plug-ins/script-fu/scripts/round-corners.scm:143 #: ../plug-ins/script-fu/scripts/slide.scm:248 #: ../plug-ins/script-fu/scripts/spinning-globe.scm:106 msgid "Work on copy" msgstr "" #: ../plug-ins/script-fu/scripts/add-bevel.scm:195 #: ../plug-ins/script-fu/scripts/chip-away.scm:152 #: ../plug-ins/script-fu/scripts/chip-away.scm:199 msgid "Keep bump layer" msgstr "" #: ../plug-ins/script-fu/scripts/addborder.scm:108 msgid "Border Layer" msgstr "" #: ../plug-ins/script-fu/scripts/addborder.scm:160 msgid "Add _Border..." msgstr "" #: ../plug-ins/script-fu/scripts/addborder.scm:161 msgid "Add a border around an image" msgstr "" #: ../plug-ins/script-fu/scripts/addborder.scm:168 msgid "Border X size" msgstr "" #: ../plug-ins/script-fu/scripts/addborder.scm:169 msgid "Border Y size" msgstr "" #: ../plug-ins/script-fu/scripts/addborder.scm:170 msgid "Border color" msgstr "" #: ../plug-ins/script-fu/scripts/addborder.scm:171 msgid "Delta value on color" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:118 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:78 msgid "Arrow" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:121 #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:35 #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:46 msgid "Alien Glow" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:124 #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:38 #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:48 #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:78 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:56 #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:41 #: ../plug-ins/script-fu/scripts/chrome-it.scm:103 msgid "Background" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:175 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:149 msgid "_Arrow..." msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:176 msgid "Create an arrow graphic with an eerie glow for web pages" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:181 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:155 #: ../plug-ins/script-fu/scripts/lava.scm:126 msgid "Size" msgstr "Veličina" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:182 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:156 msgid "Orientation" msgstr "Orijentacija" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:182 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:156 msgid "Right" msgstr "Desno" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:182 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:156 msgid "Left" msgstr "Lijevo" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:182 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:156 msgid "Up" msgstr "Gore" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:182 #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:156 msgid "Down" msgstr "Dolje" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:183 #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:94 #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:106 #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:160 #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:74 #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:114 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:134 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:178 #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:227 #: ../plug-ins/script-fu/scripts/neon-logo.scm:254 #: ../plug-ins/script-fu/scripts/neon-logo.scm:290 #: ../plug-ins/script-fu/scripts/starscape-logo.scm:148 msgid "Glow color" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-arrow.scm:185 #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:96 #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:108 #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:164 #: ../plug-ins/script-fu/scripts/camo.scm:106 #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:161 msgid "Flatten image" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:32 msgid "Bar" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:86 #: ../plug-ins/script-fu/scripts/beveled-pattern-hrule.scm:77 msgid "_Hrule..." msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:87 msgid "Create an Hrule graphic with an eerie glow for web pages" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:92 msgid "Bar length" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bar.scm:93 msgid "Bar height" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:44 #: ../plug-ins/script-fu/scripts/beveled-pattern-bullet.scm:25 msgid "Bullet" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:99 #: ../plug-ins/script-fu/scripts/beveled-pattern-bullet.scm:84 msgid "_Bullet..." msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:100 msgid "Create a bullet graphic with an eerie glow for web pages" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-bullet.scm:105 #: ../plug-ins/script-fu/scripts/text-circle.scm:214 #: ../plug-ins/script-fu/scripts/tileblur.scm:76 msgid "Radius" msgstr "Polumjer" #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:81 msgid "Glow" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:84 msgid "Button" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:150 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:120 msgid "B_utton..." msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:151 msgid "Create a button graphic with an eerie glow for web pages" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:159 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:68 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:102 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:90 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:124 #: ../plug-ins/script-fu/scripts/beveled-button.scm:153 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:129 #: ../plug-ins/script-fu/scripts/blended-logo.scm:193 #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:99 #: ../plug-ins/script-fu/scripts/news-text.scm:89 #: ../plug-ins/script-fu/scripts/pupi-button.scm:198 #: ../plug-ins/script-fu/scripts/speed-text.scm:96 msgid "Text color" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:162 #: ../plug-ins/script-fu/scripts/beveled-button.scm:154 msgid "Padding" msgstr "Popunjavanje" #: ../plug-ins/script-fu/scripts/alien-glow-button.scm:163 msgid "Glow radius" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:65 #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:105 msgid "Alien _Glow..." msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:66 msgid "Add an eerie glow around the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:73 msgid "Glow size (pixels * 4)" msgstr "" #: ../plug-ins/script-fu/scripts/alien-glow-logo.scm:106 msgid "Create a logo with an alien glow around the text" msgstr "" #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:126 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:169 msgid "Alien _Neon..." msgstr "" #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:127 msgid "Add psychedelic outlines to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:136 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:180 msgid "Width of bands" msgstr "" #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:137 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:181 msgid "Width of gaps" msgstr "" #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:138 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:182 msgid "Number of bands" msgstr "" #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:139 #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:183 msgid "Fade away" msgstr "" #: ../plug-ins/script-fu/scripts/alien-neon-logo.scm:170 msgid "Create a logo with psychedelic outlines around the text" msgstr "" #: ../plug-ins/script-fu/scripts/basic1-logo.scm:59 #: ../plug-ins/script-fu/scripts/basic1-logo.scm:92 msgid "_Basic I..." msgstr "" #: ../plug-ins/script-fu/scripts/basic1-logo.scm:60 msgid "" "Add a gradient effect, a drop shadow, and a background to the selected " "region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/basic1-logo.scm:93 msgid "" "Create a plain text logo with a gradient effect, a drop shadow, and a " "background" msgstr "" #: ../plug-ins/script-fu/scripts/basic2-logo.scm:81 #: ../plug-ins/script-fu/scripts/basic2-logo.scm:114 msgid "B_asic II..." msgstr "" #: ../plug-ins/script-fu/scripts/basic2-logo.scm:82 msgid "Add a shadow and a highlight to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/basic2-logo.scm:115 msgid "Create a simple logo with a shadow and a highlight" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-button.scm:80 #: ../plug-ins/script-fu/scripts/blended-logo.scm:142 #: ../plug-ins/script-fu/scripts/blended-logo.scm:201 #: ../plug-ins/script-fu/scripts/comic-logo.scm:120 #: ../plug-ins/script-fu/scripts/comic-logo.scm:161 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:150 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:188 #: ../plug-ins/script-fu/scripts/land.scm:87 #: ../plug-ins/script-fu/scripts/lava.scm:128 #: ../plug-ins/script-fu/scripts/rendermap.scm:88 #: ../plug-ins/script-fu/scripts/spyrogimp.scm:351 msgid "Gradient" msgstr "Gradijent" #: ../plug-ins/script-fu/scripts/beveled-button.scm:142 msgid "Simple _Beveled Button..." msgstr "" #: ../plug-ins/script-fu/scripts/beveled-button.scm:143 msgid "Create a simple, beveled button graphic for webpages" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-button.scm:151 msgid "Upper-left color" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-button.scm:152 msgid "Lower-right color" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-button.scm:155 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:104 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:143 #: ../plug-ins/script-fu/scripts/pupi-button.scm:204 msgid "Bevel width" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-button.scm:156 #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:131 #: ../plug-ins/script-fu/scripts/pupi-button.scm:208 msgid "Pressed" msgstr "Stisnuto" #: ../plug-ins/script-fu/scripts/beveled-pattern-arrow.scm:150 msgid "Create a beveled pattern arrow for webpages" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-bullet.scm:85 msgid "Create a beveled pattern bullet for webpages" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-bullet.scm:90 msgid "Diameter" msgstr "Promjer" #: ../plug-ins/script-fu/scripts/beveled-pattern-bullet.scm:92 #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:117 #: ../plug-ins/script-fu/scripts/spinning-globe.scm:104 msgid "Transparent background" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-button.scm:121 msgid "Create a beveled pattern button for webpages" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:107 msgid "H_eading..." msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-heading.scm:108 msgid "Create a beveled pattern heading for webpages" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-hrule.scm:27 msgid "Rule" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-hrule.scm:78 msgid "Create a beveled pattern hrule for webpages" msgstr "" #: ../plug-ins/script-fu/scripts/beveled-pattern-hrule.scm:83 #: ../plug-ins/script-fu/scripts/gradient-example.scm:69 #: ../plug-ins/script-fu/scripts/mkbrush.scm:70 #: ../plug-ins/script-fu/scripts/mkbrush.scm:138 #: ../plug-ins/script-fu/scripts/mkbrush.scm:194 #: ../plug-ins/script-fu/scripts/mkbrush.scm:263 #: ../plug-ins/script-fu/scripts/swirltile.scm:62 msgid "Width" msgstr "Širina" #: ../plug-ins/script-fu/scripts/beveled-pattern-hrule.scm:84 #: ../plug-ins/script-fu/scripts/gradient-example.scm:70 #: ../plug-ins/script-fu/scripts/mkbrush.scm:71 #: ../plug-ins/script-fu/scripts/mkbrush.scm:139 #: ../plug-ins/script-fu/scripts/mkbrush.scm:195 #: ../plug-ins/script-fu/scripts/mkbrush.scm:264 #: ../plug-ins/script-fu/scripts/swirltile.scm:61 msgid "Height" msgstr "Visina" #: ../plug-ins/script-fu/scripts/blend-anim.scm:206 #: ../plug-ins/script-fu/scripts/spyrogimp.scm:327 msgid "Frame" msgstr "Okvir" #: ../plug-ins/script-fu/scripts/blend-anim.scm:222 msgid "Blend Animation needs at least three source layers" msgstr "" #: ../plug-ins/script-fu/scripts/blend-anim.scm:228 msgid "_Blend..." msgstr "" #: ../plug-ins/script-fu/scripts/blend-anim.scm:229 msgid "" "Create intermediate layers to blend two or more layers over a background as " "an animation" msgstr "" #: ../plug-ins/script-fu/scripts/blend-anim.scm:236 msgid "Intermediate frames" msgstr "" #: ../plug-ins/script-fu/scripts/blend-anim.scm:237 msgid "Max. blur radius" msgstr "" #: ../plug-ins/script-fu/scripts/blend-anim.scm:238 msgid "Looped" msgstr "Petlja" #: ../plug-ins/script-fu/scripts/blended-logo.scm:126 #: ../plug-ins/script-fu/scripts/blended-logo.scm:184 msgid "Blen_ded..." msgstr "" #: ../plug-ins/script-fu/scripts/blended-logo.scm:127 msgid "" "Add blended backgrounds, highlights, and shadows to the selected region (or " "alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/blended-logo.scm:134 msgid "Offset (pixels)" msgstr "Ofset (piksela)" #: ../plug-ins/script-fu/scripts/blended-logo.scm:136 #: ../plug-ins/script-fu/scripts/blended-logo.scm:195 msgid "Blend mode" msgstr "" #: ../plug-ins/script-fu/scripts/blended-logo.scm:136 #: ../plug-ins/script-fu/scripts/blended-logo.scm:195 msgid "FG-BG-RGB" msgstr "FG-BG-RGB" #: ../plug-ins/script-fu/scripts/blended-logo.scm:137 #: ../plug-ins/script-fu/scripts/blended-logo.scm:196 msgid "FG-BG-HSV" msgstr "FG-BG-HSV" #: ../plug-ins/script-fu/scripts/blended-logo.scm:138 #: ../plug-ins/script-fu/scripts/blended-logo.scm:197 msgid "FG-Transparent" msgstr "Prozirna Pozadina" #: ../plug-ins/script-fu/scripts/blended-logo.scm:139 #: ../plug-ins/script-fu/scripts/blended-logo.scm:198 msgid "Custom Gradient" msgstr "Posebni Gradijent" #: ../plug-ins/script-fu/scripts/blended-logo.scm:143 #: ../plug-ins/script-fu/scripts/blended-logo.scm:202 #: ../plug-ins/script-fu/scripts/comic-logo.scm:121 #: ../plug-ins/script-fu/scripts/comic-logo.scm:162 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:151 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:189 #: ../plug-ins/script-fu/scripts/gradient-example.scm:71 #: ../plug-ins/script-fu/scripts/rendermap.scm:89 #: ../plug-ins/script-fu/scripts/title-header.scm:174 msgid "Gradient reverse" msgstr "" #: ../plug-ins/script-fu/scripts/blended-logo.scm:185 msgid "Create a logo with blended backgrounds, highlights, and shadows" msgstr "" #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:91 #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:125 msgid "Bo_vination..." msgstr "" #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:92 msgid "Add 'cow spots' to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:99 #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:134 msgid "Spots density X" msgstr "Osjetljivost Spota X" #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:100 #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:135 msgid "Spots density Y" msgstr "Osjetljivost Spota Y" #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:101 #: ../plug-ins/script-fu/scripts/chrome-logo.scm:96 msgid "Background Color" msgstr "Boja pozadine" #: ../plug-ins/script-fu/scripts/bovinated-logo.scm:126 msgid "Create a logo with text in the style of 'cow spots'" msgstr "" #. --- false form of "if-1" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:212 msgid "" "The Burn-In script needs two layers in total. A foreground layer with " "transparency and a background layer." msgstr "" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:219 msgid "B_urn-In..." msgstr "" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:220 msgid "" "Create intermediate layers to produce an animated 'burn-in' transition " "between two layers" msgstr "" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:228 msgid "Fadeout" msgstr "Nestajanje" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:229 msgid "Fadeout width" msgstr "" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:230 msgid "Corona width" msgstr "" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:231 msgid "After glow" msgstr "" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:232 msgid "Add glowing" msgstr "" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:233 msgid "Prepare for GIF" msgstr "Pripremi za GIF" #: ../plug-ins/script-fu/scripts/burn-in-anim.scm:234 msgid "Speed (pixels/frame)" msgstr "Brzina (piksela/okviru)" #: ../plug-ins/script-fu/scripts/camo.scm:94 msgid "_Camouflage..." msgstr "" #: ../plug-ins/script-fu/scripts/camo.scm:95 msgid "Create an image filled with a camouflage pattern" msgstr "" #: ../plug-ins/script-fu/scripts/camo.scm:100 #: ../plug-ins/script-fu/scripts/rendermap.scm:86 msgid "Image size" msgstr "" #: ../plug-ins/script-fu/scripts/camo.scm:101 #: ../plug-ins/script-fu/scripts/rendermap.scm:87 msgid "Granularity" msgstr "Granulacija" #: ../plug-ins/script-fu/scripts/camo.scm:102 msgid "Color 1" msgstr "Boja 1" #: ../plug-ins/script-fu/scripts/camo.scm:103 msgid "Color 2" msgstr "Boja 2" #: ../plug-ins/script-fu/scripts/camo.scm:104 msgid "Color 3" msgstr "Boja 3" #: ../plug-ins/script-fu/scripts/camo.scm:105 #: ../plug-ins/script-fu/scripts/distress-selection.scm:116 msgid "Smooth" msgstr "Uglađeno" #: ../plug-ins/script-fu/scripts/carved-logo.scm:148 #: ../plug-ins/script-fu/scripts/carve-it.scm:168 msgid "Carved Surface" msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:149 #: ../plug-ins/script-fu/scripts/carve-it.scm:169 msgid "Bevel Shadow" msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:150 #: ../plug-ins/script-fu/scripts/carve-it.scm:170 msgid "Bevel Highlight" msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:151 #: ../plug-ins/script-fu/scripts/carve-it.scm:171 msgid "Cast Shadow" msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:152 #: ../plug-ins/script-fu/scripts/carve-it.scm:172 msgid "Inset" msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:162 msgid "Carved..." msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:163 msgid "" "Create a logo with text raised above or carved in to the specified " "background image" msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:171 msgid "Background Image" msgstr "Slika Pozadine" #: ../plug-ins/script-fu/scripts/carved-logo.scm:174 msgid "Carve raised text" msgstr "" #: ../plug-ins/script-fu/scripts/carved-logo.scm:175 msgid "Padding around text" msgstr "" #: ../plug-ins/script-fu/scripts/carve-it.scm:182 msgid "Stencil C_arve..." msgstr "" #: ../plug-ins/script-fu/scripts/carve-it.scm:190 msgid "Image to carve" msgstr "" #: ../plug-ins/script-fu/scripts/carve-it.scm:191 msgid "Carve white areas" msgstr "" #: ../plug-ins/script-fu/scripts/chalk.scm:81 #: ../plug-ins/script-fu/scripts/chalk.scm:122 msgid "_Chalk..." msgstr "" #: ../plug-ins/script-fu/scripts/chalk.scm:82 msgid "Create a chalk drawing effect for the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/chalk.scm:123 msgid "Create a logo resembling chalk scribbled on a blackboard" msgstr "" #: ../plug-ins/script-fu/scripts/chalk.scm:132 msgid "Chalk color" msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:140 #: ../plug-ins/script-fu/scripts/chip-away.scm:186 msgid "Chip Awa_y..." msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:141 msgid "Add a chipped woodcarving effect to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:148 #: ../plug-ins/script-fu/scripts/chip-away.scm:195 msgid "Chip amount" msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:149 #: ../plug-ins/script-fu/scripts/chip-away.scm:196 msgid "Blur amount" msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:150 #: ../plug-ins/script-fu/scripts/chip-away.scm:197 msgid "Invert" msgstr "Invertiraj" #: ../plug-ins/script-fu/scripts/chip-away.scm:151 #: ../plug-ins/script-fu/scripts/chip-away.scm:198 msgid "Drop shadow" msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:153 #: ../plug-ins/script-fu/scripts/chip-away.scm:200 msgid "Fill BG with pattern" msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:154 #: ../plug-ins/script-fu/scripts/chip-away.scm:201 msgid "Keep background" msgstr "" #: ../plug-ins/script-fu/scripts/chip-away.scm:187 msgid "Create a logo resembling a chipped wood carving" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:104 msgid "Layer 1" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:105 msgid "Layer 2" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:106 msgid "Layer 3" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:107 msgid "Drop Shadow" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:201 msgid "Chrome" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:202 #: ../plug-ins/script-fu/scripts/xach-effect.scm:68 msgid "Highlight" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:214 msgid "Stencil C_hrome..." msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:215 msgid "" "Add a chrome effect to the selected region (or alpha) using a specified " "(grayscale) stencil" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:222 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:210 msgid "Chrome saturation" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:223 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:211 msgid "Chrome lightness" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:224 #: ../plug-ins/script-fu/scripts/crystal-logo.scm:215 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:212 msgid "Chrome factor" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:225 #: ../plug-ins/script-fu/scripts/crystal-logo.scm:222 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:216 msgid "Environment map" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:228 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:219 msgid "Highlight balance" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:229 #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:220 msgid "Chrome balance" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-it.scm:230 msgid "Chrome white areas" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-logo.scm:87 #: ../plug-ins/script-fu/scripts/chrome-logo.scm:120 msgid "C_hrome..." msgstr "" #: ../plug-ins/script-fu/scripts/chrome-logo.scm:88 msgid "Add a simple chrome effect to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/chrome-logo.scm:95 msgid "Offsets (pixels * 2)" msgstr "Ofseti (pikseli * 2)" #: ../plug-ins/script-fu/scripts/chrome-logo.scm:121 msgid "Create a simplistic, but cool, chromed logo" msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:81 msgid "Effect layer" msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:134 msgid "_Circuit..." msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:135 msgid "" "Fill the selected region (or alpha) with traces like those on a circuit board" msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:142 msgid "Oilify mask size" msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:143 msgid "Circuit seed" msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:144 msgid "No background (only for separate layer)" msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:145 #: ../plug-ins/script-fu/scripts/lava.scm:129 #: ../plug-ins/script-fu/scripts/predator.scm:132 #: ../plug-ins/script-fu/scripts/xach-effect.scm:138 msgid "Keep selection" msgstr "" #: ../plug-ins/script-fu/scripts/circuit.scm:146 #: ../plug-ins/script-fu/scripts/lava.scm:130 #: ../plug-ins/script-fu/scripts/predator.scm:133 msgid "Separate layer" msgstr "" #: ../plug-ins/script-fu/scripts/clothify.scm:51 msgid "_Clothify..." msgstr "" #: ../plug-ins/script-fu/scripts/clothify.scm:52 msgid "Add a cloth-like texture to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/clothify.scm:59 msgid "Blur X" msgstr "Zamućenje X" #: ../plug-ins/script-fu/scripts/clothify.scm:60 msgid "Blur Y" msgstr "Zamućenje Y" #: ../plug-ins/script-fu/scripts/clothify.scm:61 #: ../plug-ins/script-fu/scripts/swirltile.scm:58 msgid "Azimuth" msgstr "Azimut" #: ../plug-ins/script-fu/scripts/clothify.scm:62 #: ../plug-ins/script-fu/scripts/swirltile.scm:59 msgid "Elevation" msgstr "Nagib" #: ../plug-ins/script-fu/scripts/clothify.scm:63 #: ../plug-ins/script-fu/scripts/swirltile.scm:57 msgid "Depth" msgstr "Dubina" #: ../plug-ins/script-fu/scripts/coffee.scm:36 msgid "Stain" msgstr "" #: ../plug-ins/script-fu/scripts/coffee.scm:81 msgid "_Coffee Stain..." msgstr "" #: ../plug-ins/script-fu/scripts/coffee.scm:82 msgid "Add realistic looking coffee stains to the image" msgstr "" #: ../plug-ins/script-fu/scripts/coffee.scm:89 msgid "Stains" msgstr "Mrlje" #: ../plug-ins/script-fu/scripts/coffee.scm:90 msgid "Darken only" msgstr "" #: ../plug-ins/script-fu/scripts/comic-logo.scm:112 #: ../plug-ins/script-fu/scripts/comic-logo.scm:152 msgid "Comic Boo_k..." msgstr "" #: ../plug-ins/script-fu/scripts/comic-logo.scm:113 msgid "" "Add a comic-book effect to the selected region (or alpha) by outlining and " "filling with a gradient" msgstr "" #: ../plug-ins/script-fu/scripts/comic-logo.scm:122 #: ../plug-ins/script-fu/scripts/comic-logo.scm:163 #: ../plug-ins/script-fu/scripts/glossy.scm:208 #: ../plug-ins/script-fu/scripts/glossy.scm:280 msgid "Outline size" msgstr "" #: ../plug-ins/script-fu/scripts/comic-logo.scm:123 #: ../plug-ins/script-fu/scripts/comic-logo.scm:164 msgid "Outline color" msgstr "" #: ../plug-ins/script-fu/scripts/comic-logo.scm:153 msgid "" "Create a comic-book style logo by outlining and filling with a gradient" msgstr "" #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:140 #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:178 msgid "Cool _Metal..." msgstr "" #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:141 msgid "" "Add a metallic effect to the selected region (or alpha) with reflections and " "perspective shadows" msgstr "" #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:148 #: ../plug-ins/script-fu/scripts/frosty-logo.scm:143 #: ../plug-ins/script-fu/scripts/glowing-logo.scm:84 #: ../plug-ins/script-fu/scripts/neon-logo.scm:252 msgid "Effect size (pixels)" msgstr "" #: ../plug-ins/script-fu/scripts/coolmetal-logo.scm:179 msgid "Create a metallic logo with reflections and perspective shadows" msgstr "" #: ../plug-ins/script-fu/scripts/crystal-logo.scm:209 msgid "Crystal..." msgstr "" #: ../plug-ins/script-fu/scripts/crystal-logo.scm:210 msgid "" "Create a logo with a crystal/gel effect displacing the image underneath" msgstr "" #: ../plug-ins/script-fu/scripts/crystal-logo.scm:219 msgid "Background image" msgstr "" #: ../plug-ins/script-fu/scripts/difference-clouds.scm:67 msgid "Difference Clouds..." msgstr "" #: ../plug-ins/script-fu/scripts/difference-clouds.scm:68 msgid "Solid noise applied with Difference layer mode" msgstr "" #: ../plug-ins/script-fu/scripts/distress-selection.scm:105 msgid "_Distort..." msgstr "" #: ../plug-ins/script-fu/scripts/distress-selection.scm:106 msgid "Distress the selection" msgstr "" #: ../plug-ins/script-fu/scripts/distress-selection.scm:113 msgid "Threshold (bigger 1<-->254 smaller)" msgstr "" #: ../plug-ins/script-fu/scripts/distress-selection.scm:114 msgid "Spread" msgstr "Rastezanje" #: ../plug-ins/script-fu/scripts/distress-selection.scm:115 msgid "Granularity (1 is low)" msgstr "" #: ../plug-ins/script-fu/scripts/distress-selection.scm:117 msgid "Smooth horizontally" msgstr "" #: ../plug-ins/script-fu/scripts/distress-selection.scm:118 msgid "Smooth vertically" msgstr "" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:170 msgid "_Drop Shadow..." msgstr "" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:171 msgid "Add a drop shadow to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:178 msgid "Offset X" msgstr "Ofset X" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:179 msgid "Offset Y" msgstr "Ofset Y" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:180 #: ../plug-ins/script-fu/scripts/news-text.scm:88 #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:209 #: ../plug-ins/script-fu/scripts/round-corners.scm:141 #: ../plug-ins/script-fu/scripts/swirltile.scm:60 msgid "Blur radius" msgstr "" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:181 #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:154 #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:210 #: ../plug-ins/script-fu/scripts/spyrogimp.scm:350 msgid "Color" msgstr "Boja" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:182 #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:211 msgid "Opacity" msgstr "Neprozirnost" #: ../plug-ins/script-fu/scripts/drop-shadow.scm:183 #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:213 msgid "Allow resizing" msgstr "" #: ../plug-ins/script-fu/scripts/erase-rows.scm:39 msgid "_Erase Every Other Row..." msgstr "" #: ../plug-ins/script-fu/scripts/erase-rows.scm:40 msgid "Erase every other row or column" msgstr "" #: ../plug-ins/script-fu/scripts/erase-rows.scm:47 msgid "Rows/cols" msgstr "" #: ../plug-ins/script-fu/scripts/erase-rows.scm:47 msgid "Rows" msgstr "Redaka" #: ../plug-ins/script-fu/scripts/erase-rows.scm:47 msgid "Columns" msgstr "Stupci" #: ../plug-ins/script-fu/scripts/erase-rows.scm:48 msgid "Even/odd" msgstr "" #: ../plug-ins/script-fu/scripts/erase-rows.scm:48 msgid "Even" msgstr "Parni" #: ../plug-ins/script-fu/scripts/erase-rows.scm:48 msgid "Odd" msgstr "Neparni" #: ../plug-ins/script-fu/scripts/erase-rows.scm:49 msgid "Erase/fill" msgstr "" #: ../plug-ins/script-fu/scripts/erase-rows.scm:49 msgid "Erase" msgstr "Obriši" #: ../plug-ins/script-fu/scripts/erase-rows.scm:49 msgid "Fill with BG" msgstr "Ispuni bojom pozadine" #: ../plug-ins/script-fu/scripts/flatland.scm:60 msgid "_Flatland..." msgstr "" #: ../plug-ins/script-fu/scripts/flatland.scm:61 msgid "Create an image filled with a Land Pattern" msgstr "" #: ../plug-ins/script-fu/scripts/flatland.scm:66 #: ../plug-ins/script-fu/scripts/land.scm:79 msgid "Image width" msgstr "" #: ../plug-ins/script-fu/scripts/flatland.scm:67 #: ../plug-ins/script-fu/scripts/land.scm:80 msgid "Image height" msgstr "" #: ../plug-ins/script-fu/scripts/flatland.scm:68 #: ../plug-ins/script-fu/scripts/land.scm:81 msgid "Random seed" msgstr "" #: ../plug-ins/script-fu/scripts/flatland.scm:69 #: ../plug-ins/script-fu/scripts/land.scm:82 msgid "Detail level" msgstr "" #: ../plug-ins/script-fu/scripts/flatland.scm:70 #: ../plug-ins/script-fu/scripts/land.scm:85 msgid "Scale X" msgstr "Omjer X" #: ../plug-ins/script-fu/scripts/flatland.scm:71 #: ../plug-ins/script-fu/scripts/land.scm:86 msgid "Scale Y" msgstr "Omjer Y" #: ../plug-ins/script-fu/scripts/font-map.scm:152 msgid "Render _Font Map..." msgstr "" #: ../plug-ins/script-fu/scripts/font-map.scm:153 msgid "" "Create an image filled with previews of fonts matching a fontname filter" msgstr "" #: ../plug-ins/script-fu/scripts/font-map.scm:158 msgid "_Text" msgstr "_Tekstualni" #: ../plug-ins/script-fu/scripts/font-map.scm:159 msgid "Use font _name as text" msgstr "" #: ../plug-ins/script-fu/scripts/font-map.scm:160 msgid "_Labels" msgstr "_Oznake" #: ../plug-ins/script-fu/scripts/font-map.scm:161 msgid "_Filter (regexp)" msgstr "_Filter (regularni izraz)" #: ../plug-ins/script-fu/scripts/font-map.scm:162 msgid "Font _size (pixels)" msgstr "" #: ../plug-ins/script-fu/scripts/font-map.scm:163 msgid "_Border (pixels)" msgstr "_Rub (piksela)" #: ../plug-ins/script-fu/scripts/font-map.scm:164 msgid "_Color scheme" msgstr "" #: ../plug-ins/script-fu/scripts/font-map.scm:164 msgid "Black on white" msgstr "" #: ../plug-ins/script-fu/scripts/font-map.scm:164 msgid "Active colors" msgstr "" #: ../plug-ins/script-fu/scripts/frosty-logo.scm:135 #: ../plug-ins/script-fu/scripts/frosty-logo.scm:197 msgid "_Frosty..." msgstr "" #: ../plug-ins/script-fu/scripts/frosty-logo.scm:136 msgid "" "Add a frost effect to the selected region (or alpha) with an added drop " "shadow" msgstr "" #: ../plug-ins/script-fu/scripts/frosty-logo.scm:198 msgid "Create frozen logo with an added drop shadow" msgstr "" #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:146 msgid "_Fuzzy Border..." msgstr "" #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:147 msgid "Add a jagged, fuzzy border to an image" msgstr "" #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:155 #: ../plug-ins/script-fu/scripts/old-photo.scm:98 msgid "Border size" msgstr "" #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:156 msgid "Blur border" msgstr "" #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:157 msgid "Granularity (1 is Low)" msgstr "Granulacija (1 je Mala)" #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:158 msgid "Add shadow" msgstr "" #: ../plug-ins/script-fu/scripts/fuzzyborder.scm:159 msgid "Shadow weight (%)" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:59 msgid "Using _Paths" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:60 #: ../plug-ins/script-fu/scripts/gimp-online.scm:73 #: ../plug-ins/script-fu/scripts/gimp-online.scm:86 #: ../plug-ins/script-fu/scripts/gimp-online.scm:99 #: ../plug-ins/script-fu/scripts/gimp-online.scm:112 #: ../plug-ins/script-fu/scripts/gimp-online.scm:125 #: ../plug-ins/script-fu/scripts/gimp-online.scm:138 #: ../plug-ins/script-fu/scripts/gimp-online.scm:151 msgid "Bookmark to the user manual" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:72 msgid "_Preparing your Images for the Web" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:85 msgid "_Working with Digital Camera Photos" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:98 msgid "Create, Open and Save _Files" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:111 msgid "_Basic Concepts" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:124 msgid "How to Use _Dialogs" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:137 msgid "Drawing _Simple Objects" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:150 msgid "Create and Use _Selections" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:178 msgid "_Main Web Site" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:179 #: ../plug-ins/script-fu/scripts/gimp-online.scm:192 #: ../plug-ins/script-fu/scripts/gimp-online.scm:205 #: ../plug-ins/script-fu/scripts/gimp-online.scm:218 msgid "Bookmark to the GIMP web site" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:191 msgid "_Developer Web Site" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:204 msgid "_User Manual Web Site" msgstr "" #: ../plug-ins/script-fu/scripts/gimp-online.scm:217 msgid "Plug-in _Registry" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:196 #: ../plug-ins/script-fu/scripts/glossy.scm:267 msgid "Glo_ssy..." msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:197 msgid "" "Add gradients, patterns, shadows, and bump maps to the selected region (or " "alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:204 #: ../plug-ins/script-fu/scripts/glossy.scm:276 msgid "Blend gradient (text)" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:205 #: ../plug-ins/script-fu/scripts/glossy.scm:277 msgid "Text gradient reverse" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:206 #: ../plug-ins/script-fu/scripts/glossy.scm:278 msgid "Blend gradient (outline)" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:207 #: ../plug-ins/script-fu/scripts/glossy.scm:279 msgid "Outline gradient reverse" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:210 #: ../plug-ins/script-fu/scripts/glossy.scm:282 msgid "Use pattern for text instead of gradient" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:211 #: ../plug-ins/script-fu/scripts/glossy.scm:283 msgid "Pattern (text)" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:212 #: ../plug-ins/script-fu/scripts/glossy.scm:284 msgid "Use pattern for outline instead of gradient" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:213 #: ../plug-ins/script-fu/scripts/glossy.scm:285 msgid "Pattern (outline)" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:214 #: ../plug-ins/script-fu/scripts/glossy.scm:286 msgid "Use pattern overlay" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:215 #: ../plug-ins/script-fu/scripts/glossy.scm:287 msgid "Pattern (overlay)" msgstr "" #: ../plug-ins/script-fu/scripts/glossy.scm:217 #: ../plug-ins/script-fu/scripts/glossy.scm:289 #: ../plug-ins/script-fu/scripts/xach-effect.scm:92 msgid "Shadow" msgstr "Sjena" #: ../plug-ins/script-fu/scripts/glossy.scm:268 msgid "Create a logo with gradients, patterns, shadows, and bump maps" msgstr "" #: ../plug-ins/script-fu/scripts/glowing-logo.scm:76 #: ../plug-ins/script-fu/scripts/glowing-logo.scm:109 msgid "Glo_wing Hot..." msgstr "" #: ../plug-ins/script-fu/scripts/glowing-logo.scm:77 msgid "Add a glowing hot metal effect to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/glowing-logo.scm:110 msgid "Create a logo that looks like glowing hot metal" msgstr "" #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:94 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:133 msgid "Gradient Beve_l..." msgstr "" #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:95 msgid "Add a shiny look and bevel effect to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:102 #: ../plug-ins/script-fu/scripts/textured-logo.scm:125 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:106 msgid "Border size (pixels)" msgstr "" #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:103 #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:142 msgid "Bevel height (sharpness)" msgstr "" #: ../plug-ins/script-fu/scripts/gradient-bevel-logo.scm:134 msgid "Create a logo with a shiny look and beveled edges" msgstr "" #: ../plug-ins/script-fu/scripts/gradient-example.scm:63 msgid "Custom _Gradient..." msgstr "" #: ../plug-ins/script-fu/scripts/gradient-example.scm:64 msgid "Create an image filled with an example of the current gradient" msgstr "" #: ../plug-ins/script-fu/scripts/grid-system.scm:84 msgid "_Grid..." msgstr "" #: ../plug-ins/script-fu/scripts/grid-system.scm:85 msgid "" "Draw a grid as specified by the lists of X and Y locations using the current " "brush" msgstr "" #: ../plug-ins/script-fu/scripts/grid-system.scm:92 msgid "X divisions" msgstr "" #: ../plug-ins/script-fu/scripts/grid-system.scm:93 msgid "Y divisions" msgstr "" #: ../plug-ins/script-fu/scripts/guides-from-selection.scm:32 msgid "New Guides from _Selection" msgstr "" #: ../plug-ins/script-fu/scripts/guides-from-selection.scm:33 msgid "Create four guides around the bounding box of the current selection" msgstr "" #: ../plug-ins/script-fu/scripts/guides-new-percent.scm:27 msgid "New Guide (by _Percent)..." msgstr "" #: ../plug-ins/script-fu/scripts/guides-new-percent.scm:28 msgid "" "Add a guide at the position specified as a percentage of the image size" msgstr "" #: ../plug-ins/script-fu/scripts/guides-new-percent.scm:35 #: ../plug-ins/script-fu/scripts/guides-new.scm:35 msgid "Direction" msgstr "" #: ../plug-ins/script-fu/scripts/guides-new-percent.scm:35 #: ../plug-ins/script-fu/scripts/guides-new.scm:35 msgid "Horizontal" msgstr "" #: ../plug-ins/script-fu/scripts/guides-new-percent.scm:36 #: ../plug-ins/script-fu/scripts/guides-new.scm:35 msgid "Vertical" msgstr "" #: ../plug-ins/script-fu/scripts/guides-new-percent.scm:37 msgid "Position (in %)" msgstr "" #: ../plug-ins/script-fu/scripts/guides-new.scm:27 msgid "New _Guide..." msgstr "" #: ../plug-ins/script-fu/scripts/guides-new.scm:28 msgid "Add a guide at the orientation and position specified (in pixels)" msgstr "" #: ../plug-ins/script-fu/scripts/guides-new.scm:36 msgid "Position" msgstr "" #: ../plug-ins/script-fu/scripts/guides-remove-all.scm:19 msgid "_Remove all Guides" msgstr "" #: ../plug-ins/script-fu/scripts/guides-remove-all.scm:20 msgid "Remove all horizontal and vertical guides" msgstr "" #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:92 msgid "Imigre-_26..." msgstr "" #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:93 msgid "Create a logo in a two-color, scribbled text style" msgstr "" #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:100 msgid "Frame color" msgstr "" #: ../plug-ins/script-fu/scripts/i26-gunya2.scm:103 msgid "Frame size" msgstr "" #: ../plug-ins/script-fu/scripts/land.scm:73 msgid "_Land..." msgstr "" #: ../plug-ins/script-fu/scripts/land.scm:74 msgid "Create an image filled with a topographic map pattern" msgstr "" #: ../plug-ins/script-fu/scripts/land.scm:83 msgid "Land height" msgstr "" #: ../plug-ins/script-fu/scripts/land.scm:84 msgid "Sea depth" msgstr "" #: ../plug-ins/script-fu/scripts/lava.scm:117 msgid "_Lava..." msgstr "" #: ../plug-ins/script-fu/scripts/lava.scm:118 msgid "Fill the current selection with lava" msgstr "" #: ../plug-ins/script-fu/scripts/lava.scm:125 msgid "Seed" msgstr "Početak" #: ../plug-ins/script-fu/scripts/lava.scm:127 #: ../plug-ins/script-fu/scripts/swirltile.scm:64 msgid "Roughness" msgstr "Hrapavost" #: ../plug-ins/script-fu/scripts/lava.scm:131 msgid "Use current gradient" msgstr "" #: ../plug-ins/script-fu/scripts/line-nova.scm:108 msgid "Line _Nova..." msgstr "" #: ../plug-ins/script-fu/scripts/line-nova.scm:109 msgid "" "Fill a layer with rays emanating outward from its center using the " "foreground color" msgstr "" #: ../plug-ins/script-fu/scripts/line-nova.scm:116 msgid "Number of lines" msgstr "" #: ../plug-ins/script-fu/scripts/line-nova.scm:117 msgid "Sharpness (degrees)" msgstr "Izoštravanje (stupnjeva)" #: ../plug-ins/script-fu/scripts/line-nova.scm:118 msgid "Offset radius" msgstr "" #: ../plug-ins/script-fu/scripts/line-nova.scm:119 msgid "Randomness" msgstr "Nasumičnost" #: ../plug-ins/script-fu/scripts/mkbrush.scm:63 msgid "_Rectangular..." msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:64 msgid "Create a rectangular brush" msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:69 #: ../plug-ins/script-fu/scripts/mkbrush.scm:137 #: ../plug-ins/script-fu/scripts/mkbrush.scm:193 #: ../plug-ins/script-fu/scripts/mkbrush.scm:262 msgid "Name" msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:72 #: ../plug-ins/script-fu/scripts/mkbrush.scm:141 #: ../plug-ins/script-fu/scripts/mkbrush.scm:196 #: ../plug-ins/script-fu/scripts/mkbrush.scm:266 #: ../plug-ins/script-fu/scripts/paste-as-brush.scm:70 #: ../plug-ins/script-fu/scripts/select-to-brush.scm:143 msgid "Spacing" msgstr "Prored" #: ../plug-ins/script-fu/scripts/mkbrush.scm:131 msgid "Re_ctangular, Feathered..." msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:132 msgid "Create a rectangular brush with feathered edges" msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:140 #: ../plug-ins/script-fu/scripts/mkbrush.scm:265 msgid "Feathering" msgstr "Pokrivanje" #: ../plug-ins/script-fu/scripts/mkbrush.scm:187 msgid "_Elliptical..." msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:188 msgid "Create an elliptical brush" msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:256 msgid "Elli_ptical, Feathered..." msgstr "" #: ../plug-ins/script-fu/scripts/mkbrush.scm:257 msgid "Create an elliptical brush with feathered edges" msgstr "" #: ../plug-ins/script-fu/scripts/neon-logo.scm:244 #: ../plug-ins/script-fu/scripts/neon-logo.scm:280 msgid "N_eon..." msgstr "" #: ../plug-ins/script-fu/scripts/neon-logo.scm:245 msgid "Convert the selected region (or alpha) into a neon-sign like object" msgstr "" #: ../plug-ins/script-fu/scripts/neon-logo.scm:255 #: ../plug-ins/script-fu/scripts/neon-logo.scm:291 msgid "Create shadow" msgstr "" #: ../plug-ins/script-fu/scripts/neon-logo.scm:281 msgid "Create a logo in the style of a neon sign" msgstr "" #: ../plug-ins/script-fu/scripts/news-text.scm:77 msgid "Newsprint Te_xt..." msgstr "" #: ../plug-ins/script-fu/scripts/news-text.scm:78 msgid "Create a logo in the style of newspaper printing" msgstr "" #: ../plug-ins/script-fu/scripts/news-text.scm:86 msgid "Cell size (pixels)" msgstr "" #: ../plug-ins/script-fu/scripts/news-text.scm:87 #: ../plug-ins/script-fu/scripts/speed-text.scm:95 msgid "Density (%)" msgstr "Osjetljivost (%)" #: ../plug-ins/script-fu/scripts/old-photo.scm:89 msgid "_Old Photo..." msgstr "" #: ../plug-ins/script-fu/scripts/old-photo.scm:90 msgid "Make an image look like an old photo" msgstr "" #: ../plug-ins/script-fu/scripts/old-photo.scm:97 msgid "Defocus" msgstr "Defokusiraj" #. since this plug-in uses the fuzzy-border plug-in, I used the #. values of the latter, with the exception of the initial value #. and the 'minimum' value. #: ../plug-ins/script-fu/scripts/old-photo.scm:102 msgid "Sepia" msgstr "Sepia" #: ../plug-ins/script-fu/scripts/old-photo.scm:103 msgid "Mottle" msgstr "Išaran" #: ../plug-ins/script-fu/scripts/palette-export.scm:226 msgid "Folder for the output file" msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:227 msgid "" "The name of the file to create (if a file with this name already exist, it " "will be replaced)" msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:235 msgid "The filename you entered is not a suitable name for a file." msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:237 msgid "" "All characters in the name are either white-spaces or characters which can " "not appear in filenames." msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:265 msgid "" "Export the active palette as a CSS stylesheet with the color entry name as " "their class name, and the color itself as the color attribute" msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:291 msgid "Export the active palette as a PHP dictionary (name => color)" msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:323 msgid "Export the active palette as a Python dictionary (name: color)" msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:352 msgid "" "Write all the colors in a palette to a text file, one hexadecimal value per " "line (no names)" msgstr "" #: ../plug-ins/script-fu/scripts/palette-export.scm:399 msgid "Export the active palette as a java.util.Hashtable" msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-brush.scm:56 #: ../plug-ins/script-fu/scripts/paste-as-pattern.scm:44 msgid "There is no image data in the clipboard to paste." msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-brush.scm:62 msgid "New _Brush..." msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-brush.scm:63 msgid "Paste the clipboard contents into a new brush" msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-brush.scm:68 #: ../plug-ins/script-fu/scripts/select-to-brush.scm:141 msgid "Brush name" msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-brush.scm:69 #: ../plug-ins/script-fu/scripts/paste-as-pattern.scm:57 #: ../plug-ins/script-fu/scripts/select-to-brush.scm:142 #: ../plug-ins/script-fu/scripts/select-to-pattern.scm:102 msgid "File name" msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-pattern.scm:50 msgid "New _Pattern..." msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-pattern.scm:51 msgid "Paste the clipboard contents into a new pattern" msgstr "" #: ../plug-ins/script-fu/scripts/paste-as-pattern.scm:56 #: ../plug-ins/script-fu/scripts/select-to-pattern.scm:101 msgid "Pattern name" msgstr "" #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:198 msgid "_Perspective..." msgstr "" #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:199 msgid "Add a perspective shadow to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:206 msgid "Angle" msgstr "Kut" #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:207 msgid "Relative distance of horizon" msgstr "" #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:208 msgid "Relative length of shadow" msgstr "" #: ../plug-ins/script-fu/scripts/perspective-shadow.scm:212 msgid "Interpolation" msgstr "" #: ../plug-ins/script-fu/scripts/predator.scm:121 msgid "_Predator..." msgstr "" #: ../plug-ins/script-fu/scripts/predator.scm:122 msgid "Add a 'Predator' effect to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/predator.scm:129 msgid "Edge amount" msgstr "" #: ../plug-ins/script-fu/scripts/predator.scm:130 msgid "Pixelize" msgstr "Pikseliziraj" #: ../plug-ins/script-fu/scripts/predator.scm:131 msgid "Pixel amount" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:187 msgid "_Round Button..." msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:188 msgid "Create images, each containing an oval button graphic" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:196 msgid "Upper color" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:197 msgid "Lower color" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:199 msgid "Upper color (active)" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:200 msgid "Lower color (active)" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:201 msgid "Text color (active)" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:202 msgid "Padding X" msgstr "Podloga X" #: ../plug-ins/script-fu/scripts/pupi-button.scm:203 msgid "Padding Y" msgstr "Podloga Y" #: ../plug-ins/script-fu/scripts/pupi-button.scm:205 msgid "Round ratio" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:206 msgid "Not pressed" msgstr "" #: ../plug-ins/script-fu/scripts/pupi-button.scm:207 msgid "Not pressed (active)" msgstr "" #: ../plug-ins/script-fu/scripts/rendermap.scm:80 msgid "Render _Map..." msgstr "" #: ../plug-ins/script-fu/scripts/rendermap.scm:81 msgid "Create an image filled with an Earth-like map pattern" msgstr "" #: ../plug-ins/script-fu/scripts/rendermap.scm:90 msgid "Behavior" msgstr "" #: ../plug-ins/script-fu/scripts/rendermap.scm:90 msgid "Tile" msgstr "Pločica" #: ../plug-ins/script-fu/scripts/rendermap.scm:90 msgid "Detail in Middle" msgstr "Detalj u Sredini" #: ../plug-ins/script-fu/scripts/reverse-layers.scm:42 msgid "Reverse Layer Order" msgstr "" #: ../plug-ins/script-fu/scripts/reverse-layers.scm:43 msgid "Reverse the order of layers in the image" msgstr "" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:119 msgid "_Rippling..." msgstr "" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:120 msgid "" "Create a multi-layer image by adding a ripple effect to the current image" msgstr "" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:127 msgid "Rippling strength" msgstr "" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:128 #: ../plug-ins/script-fu/scripts/waves-anim.scm:105 msgid "Number of frames" msgstr "" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:129 msgid "Edge behavior" msgstr "" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:129 msgid "Wrap" msgstr "Omotaj" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:129 msgid "Smear" msgstr "Razmazivanje" #: ../plug-ins/script-fu/scripts/ripply-anim.scm:129 msgid "Black" msgstr "Crna" #: ../plug-ins/script-fu/scripts/round-corners.scm:129 msgid "_Round Corners..." msgstr "" #: ../plug-ins/script-fu/scripts/round-corners.scm:130 msgid "" "Round the corners of an image and optionally add a drop-shadow and background" msgstr "" #: ../plug-ins/script-fu/scripts/round-corners.scm:137 msgid "Edge radius" msgstr "" #: ../plug-ins/script-fu/scripts/round-corners.scm:138 msgid "Add drop-shadow" msgstr "" #: ../plug-ins/script-fu/scripts/round-corners.scm:142 msgid "Add background" msgstr "" #: ../plug-ins/script-fu/scripts/script-fu-set-cmap.scm:53 msgid "Se_t Colormap..." msgstr "" #: ../plug-ins/script-fu/scripts/script-fu-set-cmap.scm:54 msgid "Change the colormap of an image to the colors in a specified palette." msgstr "" #: ../plug-ins/script-fu/scripts/script-fu-set-cmap.scm:61 msgid "Palette" msgstr "" #: ../plug-ins/script-fu/scripts/selection-round.scm:139 msgid "Rounded R_ectangle..." msgstr "" #: ../plug-ins/script-fu/scripts/selection-round.scm:140 msgid "Round the corners of the current selection" msgstr "" #: ../plug-ins/script-fu/scripts/selection-round.scm:147 msgid "Radius (%)" msgstr "" #: ../plug-ins/script-fu/scripts/selection-round.scm:148 msgid "Concave" msgstr "" #: ../plug-ins/script-fu/scripts/select-to-brush.scm:133 msgid "To _Brush..." msgstr "" #: ../plug-ins/script-fu/scripts/select-to-brush.scm:134 msgid "Convert a selection to a brush" msgstr "" #: ../plug-ins/script-fu/scripts/select-to-image.scm:81 msgid "To _Image" msgstr "" #: ../plug-ins/script-fu/scripts/select-to-image.scm:82 msgid "Convert a selection to an image" msgstr "" #: ../plug-ins/script-fu/scripts/select-to-pattern.scm:93 msgid "To _Pattern..." msgstr "" #: ../plug-ins/script-fu/scripts/select-to-pattern.scm:94 msgid "Convert a selection to a pattern" msgstr "" #: ../plug-ins/script-fu/scripts/slide.scm:236 msgid "_Slide..." msgstr "" #: ../plug-ins/script-fu/scripts/slide.scm:237 msgid "Add a slide-film like frame, sprocket holes, and labels to an image" msgstr "" #: ../plug-ins/script-fu/scripts/slide.scm:245 msgid "Number" msgstr "Broj" #: ../plug-ins/script-fu/scripts/slide.scm:247 msgid "Font color" msgstr "" #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:204 msgid "SOTA Chrome..." msgstr "" #: ../plug-ins/script-fu/scripts/sota-chrome-logo.scm:205 msgid "Create a State Of The Art chromed logo" msgstr "" #: ../plug-ins/script-fu/scripts/speed-text.scm:86 msgid "Speed Text..." msgstr "" #: ../plug-ins/script-fu/scripts/speed-text.scm:87 msgid "Create a logo with a speedy text effect" msgstr "" #: ../plug-ins/script-fu/scripts/spinning-globe.scm:94 msgid "_Spinning Globe..." msgstr "" #: ../plug-ins/script-fu/scripts/spinning-globe.scm:95 msgid "" "Create an animation by mapping the current image onto a spinning sphere" msgstr "" #: ../plug-ins/script-fu/scripts/spinning-globe.scm:102 msgid "Frames" msgstr "Okviri" #: ../plug-ins/script-fu/scripts/spinning-globe.scm:103 msgid "Turn from left to right" msgstr "" #: ../plug-ins/script-fu/scripts/spinning-globe.scm:105 msgid "Index to n colors (0 = remain RGB)" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:240 msgid "Rendering Spyro" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:314 msgid "_Spyrogimp..." msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:315 msgid "" "Add Spirographs, Epitrochoids, and Lissajous Curves to the current layer" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:323 msgid "Type" msgstr "Tip" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:323 msgid "Spyrograph" msgstr "Spirograf" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:324 msgid "Epitrochoid" msgstr "Epitrohoid" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:325 msgid "Lissajous" msgstr "Lissajouve krivulje" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:326 msgid "Shape" msgstr "Oblik" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:326 msgid "Circle" msgstr "Krug" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:328 msgid "Triangle" msgstr "Trokut" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:329 msgid "Square" msgstr "Kvadrat" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:330 msgid "Pentagon" msgstr "Pentagon" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:331 msgid "Hexagon" msgstr "Šesterokut" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:332 msgid "Polygon: 7 sides" msgstr "Poligon: 7 stranica" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:333 msgid "Polygon: 8 sides" msgstr "Poligon: 8 stranica" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:334 msgid "Polygon: 9 sides" msgstr "Poligon: 9 stranica" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:335 msgid "Polygon: 10 sides" msgstr "Poligon: 10 stranica" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:336 msgid "Outer teeth" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:337 msgid "Inner teeth" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:338 msgid "Margin (pixels)" msgstr "Margina (piksela)" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:339 msgid "Hole ratio" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:340 #: ../plug-ins/script-fu/scripts/text-circle.scm:215 msgid "Start angle" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:342 msgid "Tool" msgstr "Alat" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:342 msgid "Pencil" msgstr "Olovka" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:343 #: ../plug-ins/script-fu/scripts/spyrogimp.scm:345 msgid "Brush" msgstr "Kist" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:344 msgid "Airbrush" msgstr "Zračni kist" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:347 msgid "Color method" msgstr "" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:347 msgid "Solid Color" msgstr "Boja Podloge" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:348 msgid "Gradient: Loop Sawtooth" msgstr "Preljevanje: ponavljaj sawtooth" #: ../plug-ins/script-fu/scripts/spyrogimp.scm:349 msgid "Gradient: Loop Triangle" msgstr "Preljevanje: ponavljajući trokut" #: ../plug-ins/script-fu/scripts/starscape-logo.scm:139 msgid "Sta_rscape..." msgstr "" #: ../plug-ins/script-fu/scripts/starscape-logo.scm:140 msgid "Create a logo using a rock-like texture, a nova glow, and shadow" msgstr "" #: ../plug-ins/script-fu/scripts/swirltile.scm:51 msgid "Swirl-_Tile..." msgstr "" #: ../plug-ins/script-fu/scripts/swirltile.scm:52 msgid "Create an image filled with a swirled tile effect" msgstr "" #: ../plug-ins/script-fu/scripts/swirltile.scm:63 msgid "Whirl amount" msgstr "" #: ../plug-ins/script-fu/scripts/swirly-pattern.scm:82 msgid "_Swirly..." msgstr "" #: ../plug-ins/script-fu/scripts/swirly-pattern.scm:83 msgid "Create an image filled with a swirly pattern" msgstr "" #: ../plug-ins/script-fu/scripts/swirly-pattern.scm:88 msgid "Quarter size" msgstr "" #: ../plug-ins/script-fu/scripts/swirly-pattern.scm:89 msgid "Whirl angle" msgstr "" #: ../plug-ins/script-fu/scripts/swirly-pattern.scm:90 msgid "Number of times to whirl" msgstr "" #: ../plug-ins/script-fu/scripts/test-sphere.scm:267 msgid "_Sphere..." msgstr "" #: ../plug-ins/script-fu/scripts/text-circle.scm:207 msgid "Text C_ircle..." msgstr "" #: ../plug-ins/script-fu/scripts/text-circle.scm:208 msgid "" "Create a logo by rendering the specified text along the perimeter of a circle" msgstr "" #: ../plug-ins/script-fu/scripts/text-circle.scm:216 msgid "Fill angle" msgstr "" #: ../plug-ins/script-fu/scripts/text-circle.scm:218 msgid "Antialias" msgstr "Antialias" #: ../plug-ins/script-fu/scripts/textured-logo.scm:117 #: ../plug-ins/script-fu/scripts/textured-logo.scm:159 msgid "_Textured..." msgstr "" #: ../plug-ins/script-fu/scripts/textured-logo.scm:118 msgid "" "Fill the selected region (or alpha) with a texture and add highlights, " "shadows, and a mosaic background" msgstr "" #: ../plug-ins/script-fu/scripts/textured-logo.scm:127 #: ../plug-ins/script-fu/scripts/textured-logo.scm:169 msgid "Mosaic tile type" msgstr "" #: ../plug-ins/script-fu/scripts/textured-logo.scm:127 #: ../plug-ins/script-fu/scripts/textured-logo.scm:169 msgid "Squares" msgstr "Kvadrati" #: ../plug-ins/script-fu/scripts/textured-logo.scm:128 #: ../plug-ins/script-fu/scripts/textured-logo.scm:170 msgid "Hexagons" msgstr "Haksagoni" #: ../plug-ins/script-fu/scripts/textured-logo.scm:129 #: ../plug-ins/script-fu/scripts/textured-logo.scm:171 msgid "Octagons" msgstr "Oktagoni" #: ../plug-ins/script-fu/scripts/textured-logo.scm:131 #: ../plug-ins/script-fu/scripts/textured-logo.scm:173 msgid "Starting blend" msgstr "" #: ../plug-ins/script-fu/scripts/textured-logo.scm:132 #: ../plug-ins/script-fu/scripts/textured-logo.scm:174 msgid "Ending blend" msgstr "" #: ../plug-ins/script-fu/scripts/textured-logo.scm:160 msgid "" "Create a textured logo with highlights, shadows, and a mosaic background" msgstr "" #: ../plug-ins/script-fu/scripts/textured-logo.scm:168 msgid "Text pattern" msgstr "" #: ../plug-ins/script-fu/scripts/tileblur.scm:68 msgid "_Tileable Blur..." msgstr "" #: ../plug-ins/script-fu/scripts/tileblur.scm:69 msgid "Blur the edges of an image so the result tiles seamlessly" msgstr "" #: ../plug-ins/script-fu/scripts/tileblur.scm:77 msgid "Blur vertically" msgstr "" #: ../plug-ins/script-fu/scripts/tileblur.scm:78 msgid "Blur horizontally" msgstr "" #: ../plug-ins/script-fu/scripts/tileblur.scm:79 msgid "Blur type" msgstr "" #: ../plug-ins/script-fu/scripts/tileblur.scm:79 msgid "IIR" msgstr "IIR" #: ../plug-ins/script-fu/scripts/tileblur.scm:79 msgid "RLE" msgstr "RLE" #: ../plug-ins/script-fu/scripts/title-header.scm:165 msgid "Web Title Header..." msgstr "" #: ../plug-ins/script-fu/scripts/title-header.scm:166 msgid "Create a decorative web title header" msgstr "" #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:98 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:138 msgid "_Particle Trace..." msgstr "" #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:99 msgid "Add a Trace of Particles effect to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:107 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:147 msgid "Hit rate" msgstr "" #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:108 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:148 msgid "Edge width" msgstr "" #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:109 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:149 msgid "Edge only" msgstr "" #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:110 #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:150 msgid "Base color" msgstr "" #: ../plug-ins/script-fu/scripts/t-o-p-logo.scm:139 msgid "Create a logo using a Trace Of Particles effect" msgstr "" #: ../plug-ins/script-fu/scripts/truchet.scm:165 msgid "T_ruchet..." msgstr "" #: ../plug-ins/script-fu/scripts/truchet.scm:166 msgid "Create an image filled with a Truchet pattern" msgstr "" #: ../plug-ins/script-fu/scripts/truchet.scm:174 msgid "Foreground color" msgstr "" #: ../plug-ins/script-fu/scripts/unsharp-mask.scm:82 msgid "Mask size" msgstr "" #: ../plug-ins/script-fu/scripts/unsharp-mask.scm:83 msgid "Mask opacity" msgstr "" #: ../plug-ins/script-fu/scripts/waves-anim.scm:95 msgid "_Waves..." msgstr "" #: ../plug-ins/script-fu/scripts/waves-anim.scm:96 msgid "" "Create a multi-layer image with an effect like a stone was thrown into the " "current image" msgstr "" #: ../plug-ins/script-fu/scripts/waves-anim.scm:103 msgid "Amplitude" msgstr "Amplituda" #: ../plug-ins/script-fu/scripts/waves-anim.scm:104 msgid "Wavelength" msgstr "Valna Duljina" #: ../plug-ins/script-fu/scripts/waves-anim.scm:106 msgid "Invert direction" msgstr "Obratni Smjer" #: ../plug-ins/script-fu/scripts/weave.scm:389 msgid "_Weave..." msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:390 msgid "" "Create a new layer filled with a weave effect to be used as an overlay or " "bump map" msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:397 msgid "Ribbon width" msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:398 msgid "Ribbon spacing" msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:399 msgid "Shadow darkness" msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:400 msgid "Shadow depth" msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:401 msgid "Thread length" msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:402 msgid "Thread density" msgstr "" #: ../plug-ins/script-fu/scripts/weave.scm:403 msgid "Thread intensity" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:121 msgid "_Xach-Effect..." msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:122 msgid "Add a subtle translucent 3D effect to the selected region (or alpha)" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:129 msgid "Highlight X offset" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:130 msgid "Highlight Y offset" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:131 msgid "Highlight color" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:132 msgid "Highlight opacity" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:133 msgid "Drop shadow color" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:134 msgid "Drop shadow opacity" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:135 msgid "Drop shadow blur radius" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:136 msgid "Drop shadow X offset" msgstr "" #: ../plug-ins/script-fu/scripts/xach-effect.scm:137 msgid "Drop shadow Y offset" msgstr "" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/slideshow-ubuntustudio.po0000644000000000000000000002064312704126313023311 0ustar # Croatian translation for ubiquity-slideshow-ubuntu # Copyright (c) 2012 Rosetta Contributors and Canonical Ltd 2012 # This file is distributed under the same license as the ubiquity-slideshow-ubuntu package. # FIRST AUTHOR , 2012. # msgid "" msgstr "" "Project-Id-Version: ubiquity-slideshow-ubuntu\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-03-24 23:23+0200\n" "PO-Revision-Date: 2015-10-20 19:47+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 07:37+0000\n" "X-Generator: Launchpad (build 17995)\n" #. type: Content of:

#: slideshows/ubuntustudio/slides/00_welcome.html:2 msgid "Welcome!" msgstr "Dobrodošli!" #. type: Content of:

#: slideshows/ubuntustudio/slides/00_welcome.html:7 msgid "Thanks for choosing Ubuntu Studio, and welcome to the installation." msgstr "Dobrodošli u instalaciju i hvala što ste odabrali Ubuntu Studio." #. type: Content of:

#: slideshows/ubuntustudio/slides/00_welcome.html:8 msgid "" "In this slideshow we will present a few features which make Ubuntu Studio " "the perfect companion for artists." msgstr "" "Prezentiramo Vam nekoliko značajka koje čine Ubuntu Studio savršenim " "suputnikom za izvođače." #. type: Content of:

#: slideshows/ubuntustudio/slides/01_audio.html:2 msgid "Let the world hear you" msgstr "Neka svijet čuje za vas" #. type: Content of:

#: slideshows/ubuntustudio/slides/01_audio.html:7 msgid "" "From recording an album, podcast editing, or scoring a film, Ubuntu Studio " "includes applications and documented work flows to support your audio needs." msgstr "" "Od snimanja albuma, uređivanja podcasta, ocjenjivanja filmova, Ubuntu Studio " "uključuje aplikacija i dokumentirane radne tokove za vaše zvučne potrebe." #. type: Content of:

#: slideshows/ubuntustudio/slides/01_audio.html:9 #: slideshows/ubuntustudio/slides/02_video.html:9 #: slideshows/ubuntustudio/slides/03_graphics.html:9 #: slideshows/ubuntustudio/slides/04_photography.html:9 msgid "Included software" msgstr "Uključeni softver" #. type: Content of:
  • #: slideshows/ubuntustudio/slides/01_audio.html:11 msgid "Ardour DAW" msgstr "Ardour DAW" #. type: Content of:
    • #: slideshows/ubuntustudio/slides/01_audio.html:12 msgid "JACK Sound Server" msgstr "JACK zvučni poslužitelj" #. type: Content of:
      • #: slideshows/ubuntustudio/slides/01_audio.html:13 msgid "LADSPA/LV2 Plugins" msgstr "LADSPA/LV priključci" #. type: Content of:

        #: slideshows/ubuntustudio/slides/02_video.html:2 msgid "Create amazing videos" msgstr "Stvarajte očaravajuće video uradke" #. type: Content of:

        #: slideshows/ubuntustudio/slides/02_video.html:7 msgid "" "From simple home movies to feature length film with compositing and post " "production effects, Ubuntu Studio can help you realize your videographic " "vision." msgstr "" "Od jednostavnih kućnih uradaka do dugometražnih filmova s kompozicijom i " "post produkcijskim efektima, Ubuntu Studio pomaže kod ostvarenja video " "zamisli." #. type: Content of:

        • #: slideshows/ubuntustudio/slides/02_video.html:11 msgid "Blender Sequence Editor and Compositing" msgstr "Mikser sekvence i kompozicije" #. type: Content of:
          • #: slideshows/ubuntustudio/slides/02_video.html:12 msgid "Kdenlive Video Editor" msgstr "Kdenlive video uređivač" #. type: Content of:
            • #: slideshows/ubuntustudio/slides/02_video.html:13 msgid "Open Shot Video Editor" msgstr "Open Shot video uređivač" #. type: Content of:

              #: slideshows/ubuntustudio/slides/03_graphics.html:2 msgid "Graphic artists and designers" msgstr "Grafičari i dizajneri" #. type: Content of:

              #: slideshows/ubuntustudio/slides/03_graphics.html:7 msgid "" "With Ubuntu Studio, you can easily create 3D models, animated films, " "scalable vector graphics, logos, flyers... and more!" msgstr "" "S Ubuntu Studiom, možete jednostavno stvoriti 3D modele, animirane filmove, " "vektorske grafike, logotipove, letke... i još mnogo toga!" #. type: Content of:

              • #: slideshows/ubuntustudio/slides/03_graphics.html:11 msgid "Blender 3D Content Creation Suite" msgstr "Blender 3D set stvaranja sadržaja" #. type: Content of:
                • #: slideshows/ubuntustudio/slides/03_graphics.html:12 msgid "Inkscape Scalable Vector Graphics Editor" msgstr "Inkscape uređivač vektorske grafike" #. type: Content of:
                  • #: slideshows/ubuntustudio/slides/03_graphics.html:13 msgid "Krita Paint Studio" msgstr "Krita Paint Studio" #. type: Content of:
                    • #: slideshows/ubuntustudio/slides/03_graphics.html:14 #: slideshows/ubuntustudio/slides/04_photography.html:14 msgid "GIMP Image Editor" msgstr "GIMP uređivač slika" #. type: Content of:

                      #: slideshows/ubuntustudio/slides/04_photography.html:2 msgid "Photographers too" msgstr "Fotografi također" #. type: Content of:

                      #: slideshows/ubuntustudio/slides/04_photography.html:7 msgid "" "From casual hobbyist to professional, handy and powerful applications are " "included to help you manage your photos and process them." msgstr "" "Od amatera do profesionalca, jednostavne i moćne aplikacije su uključene da " "vam pomognu upravljati fotografijama." #. type: Content of:

                      • #: slideshows/ubuntustudio/slides/04_photography.html:11 msgid "Darktable Photo Editor" msgstr "Darktable uređivač fotografija" #. type: Content of:
                        • #: slideshows/ubuntustudio/slides/04_photography.html:12 msgid "RawTherapee Raw Image Processor" msgstr "RawTherapee Raw obrađivač fotografija" #. type: Content of:
                          • #: slideshows/ubuntustudio/slides/04_photography.html:13 msgid "Shotwell Photo Manager" msgstr "Shotwell upravitelj fotografija" #. type: Content of:

                            #: slideshows/ubuntustudio/slides/05_software.html:2 msgid "Get more applications" msgstr "Nabavite više aplikacija" #. type: Content of:

                            #: slideshows/ubuntustudio/slides/05_software.html:7 msgid "" "Not only is Ubuntu Studio designed to be a media creation power, it is also " "a robust desktop OS." msgstr "" "Ubuntu Studio nije napravljen samo za stvaranje sadržaja, već je i stabilan " "operativan sustav." #. type: Content of:

                            #: slideshows/ubuntustudio/slides/05_software.html:8 msgid "" "However, if you want additional applications not installed by default you " "can choose from the tens of thousands in the Ubuntu repositories." msgstr "" "Međutim, ako želite dodatne aplikacije koje nisu zadano instalirane možete " "odabrati od desetak tisuća iz Ubuntu repozitorija." #. type: Content of:

                            #: slideshows/ubuntustudio/slides/06_support.html:2 msgid "Thank you!" msgstr "Hvala vam!" #. type: Content of:

                            #: slideshows/ubuntustudio/slides/06_support.html:7 msgid "" "Thanks for taking the time with us. We'd love to hear about your experiences " "with Ubuntu Studio. You can share them on the Ubuntu Studio users mailing list." msgstr "" "Hvala vam na odvojenom vremenu. Vrlo rado bi željeli saznati vaše iskustvo s " "Ubuntu Studiom. Možete ih podijeliti na Ubuntu Studio mailing listi." #. type: Content of:

                            #: slideshows/ubuntustudio/slides/06_support.html:8 msgid "" "Join our IRC channel #ubuntustudio for online support by clicking here." msgstr "" "Pridružite se našem IRC kanalu #ubuntustudio za online podršku " "tako da kliknete ovdje." #. type: Content of:

                            #: slideshows/ubuntustudio/slides/06_support.html:9 msgid "" "Finally, visit us on the web at the Ubuntu Studio website. Thank you again!" msgstr "" "U konačnici, posjetite nas na Ubuntu " "Studio internet stranici. Hvala vam još jednom!" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/gnome-bluetooth2.po0000644000000000000000000003176312704126313021737 0ustar # Croatian translation for bluez-gnome # Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007 # This file is distributed under the same license as the bluez-gnome package. # FIRST AUTHOR , 2007. # msgid "" msgstr "" "Project-Id-Version: bluez-gnome\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-01-28 16:59+0000\n" "PO-Revision-Date: 2016-01-29 01:00+0000\n" "Last-Translator: Launchpad Translations Administrators \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 06:20+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../lib/bluetooth-chooser-button.c:71 msgid "Click to select device…" msgstr "Klikni za odabir uređaja..." #: ../lib/bluetooth-chooser-button.c:201 #: ../lib/bluetooth-settings-widget.c:1255 ../sendto/main.c:447 #: ../sendto/main.c:738 ../sendto/main.c:794 msgid "_Cancel" msgstr "_Odustani" #: ../lib/bluetooth-chooser-button.c:202 msgid "_OK" msgstr "_U redu" #: ../lib/bluetooth-chooser.c:135 ../lib/bluetooth-filter-widget.c:82 #: ../lib/bluetooth-utils.c:101 msgid "Unknown" msgstr "Nepoznato" #: ../lib/bluetooth-chooser.c:176 msgid "No adapters available" msgstr "Nema dostupnih adaptera" #: ../lib/bluetooth-chooser.c:180 ../lib/bluetooth-chooser.c:806 #: ../lib/bluetooth-settings-widget.c:1544 msgid "Searching for devices…" msgstr "Pretraživanje uređaja..." #: ../lib/bluetooth-chooser.c:698 ../lib/bluetooth-chooser.c:988 msgid "Device" msgstr "Uređaj" #: ../lib/bluetooth-chooser.c:734 ../lib/settings.ui.h:3 msgid "Type" msgstr "Vrsta" #: ../lib/bluetooth-chooser.c:990 ../lib/bluetooth-settings-widget.c:1506 msgid "Devices" msgstr "Uređaji" #: ../lib/bluetooth-filter-widget.c:72 msgid "All categories" msgstr "Sve kategorije" #: ../lib/bluetooth-filter-widget.c:74 ../lib/settings.ui.h:2 msgid "Paired" msgstr "Upareno" #: ../lib/bluetooth-filter-widget.c:76 msgid "Trusted" msgstr "Povjerljiv" #: ../lib/bluetooth-filter-widget.c:78 msgid "Not paired or trusted" msgstr "Nema uparenih ili povjerljivih" #: ../lib/bluetooth-filter-widget.c:80 msgid "Paired or trusted" msgstr "Upareni ili povjerljivi" #. This is the title of the filter section of the Bluetooth device chooser. #. * It used to say Show Only Bluetooth Devices With... #: ../lib/bluetooth-filter-widget.c:231 msgid "Show:" msgstr "Prikaži:" #. The device category filter #: ../lib/bluetooth-filter-widget.c:247 msgid "Device _category:" msgstr "Kategorija _uređaja:" #: ../lib/bluetooth-filter-widget.c:258 msgid "Select the device category to filter" msgstr "Odaberi kategoriju uređaja za izdvajanje" #. The device type filter #: ../lib/bluetooth-filter-widget.c:272 msgid "Device _type:" msgstr "Vrsta _uređaja:" #: ../lib/bluetooth-filter-widget.c:289 msgid "Select the device type to filter" msgstr "Odaberi vrstu uređaja za izdvajanje" #: ../lib/bluetooth-filter-widget.c:295 msgid "Input devices (mice, keyboards, etc.)" msgstr "Ulazni uređaji (miševi, tipkovnice, itd.)" #: ../lib/bluetooth-filter-widget.c:299 msgid "Headphones, headsets and other audio devices" msgstr "Slušalice, slušalice s mikrofonom i ostali zvučni uređaji" #: ../lib/bluetooth-pairing-dialog.c:83 ../lib/bluetooth-pairing-dialog.c:90 #: ../lib/bluetooth-pairing-dialog.c:104 msgid "Confirm Bluetooth PIN" msgstr "Potvrdi Bluetooth PIN" #: ../lib/bluetooth-pairing-dialog.c:84 #, c-format msgid "Please confirm the PIN that was entered on '%s'." msgstr "Potvrdite PIN koji je upisan na '%s'." #: ../lib/bluetooth-pairing-dialog.c:88 ../lib/bluetooth-pairing-dialog.c:101 #: ../lib/bluetooth-pairing-dialog.c:149 msgid "Confirm" msgstr "Potvrdi" #: ../lib/bluetooth-pairing-dialog.c:91 #, c-format msgid "" "Confirm the Bluetooth PIN for '%s'. This can usually be found in the " "device's manual." msgstr "" "Potvrdi Bluetooth PIN za '%s'. Uobičajeno može biti sadržan u uputama " "uređaja." #: ../lib/bluetooth-pairing-dialog.c:97 #, c-format msgid "Pairing '%s'" msgstr "Uparivanje '%s'" #: ../lib/bluetooth-pairing-dialog.c:105 #, c-format msgid "" "Please confirm that the following PIN matches the one displayed on '%s'." msgstr "Potvrdite da se sljedeći PIN podudara s onim prikazanim na '%s'." #: ../lib/bluetooth-pairing-dialog.c:110 msgid "Bluetooth Pairing Request" msgstr "Zahtjev Bluetooth uparivanja" #: ../lib/bluetooth-pairing-dialog.c:111 #, c-format msgid "'%s' wants to pair with this device. Do you want to allow pairing?" msgstr "" "'%s' se želi upariti s ovim uređajem. Želite li dopustiti uparivanje?" #: ../lib/bluetooth-pairing-dialog.c:116 msgid "Confirm Bluetooth Connection" msgstr "Potvrdi Bluetooth povezivanje" #: ../lib/bluetooth-pairing-dialog.c:117 #, c-format msgid "'%s' wants to connect with this device. Do you want to allow it?" msgstr "'%s' se želi povezati s ovim uređajem. Želite li to dopustiti?" #: ../lib/bluetooth-pairing-dialog.c:125 #, c-format msgid "Please enter the following PIN on '%s'." msgstr "Upišite sljedeći PIN na '%s'." #: ../lib/bluetooth-pairing-dialog.c:128 #, c-format msgid "" "Please enter the following PIN on '%s'. Then press “Return” on the keyboard." msgstr "" "Upišite sljedeći PIN na '%s'. Zatim pritisnite “Return” na tipkovnici." #: ../lib/bluetooth-pairing-dialog.c:131 msgid "" "Please move the joystick of your iCade in the following directions. Then " "press any of the white buttons." msgstr "" "Pomičite joystick vašeg iCada u sljedećim smjerovima. Zatim pritisnite jednu " "od bijelih tipki." #: ../lib/bluetooth-pairing-dialog.c:139 msgid "Allow" msgstr "Dopusti" #: ../lib/bluetooth-pairing-dialog.c:143 msgid "Dismiss" msgstr "Odbaci" #. Cancel button #: ../lib/bluetooth-pairing-dialog.c:153 ../lib/bluetooth-pairing-dialog.c:308 msgid "Cancel" msgstr "Odustani" #. OK button #: ../lib/bluetooth-pairing-dialog.c:289 #: ../lib/bluetooth-settings-obexpush.c:246 msgid "Accept" msgstr "Prihvati" #: ../lib/bluetooth-settings-row.c:79 ../lib/bluetooth-settings-row.ui.h:1 msgid "Not Set Up" msgstr "Nije postavljeno" #: ../lib/bluetooth-settings-row.c:81 msgid "Connected" msgstr "Povezano" #: ../lib/bluetooth-settings-row.c:83 msgid "Disconnected" msgstr "Odspojen" #: ../lib/bluetooth-settings-widget.c:1123 msgid "Yes" msgstr "Da" #: ../lib/bluetooth-settings-widget.c:1123 msgid "No" msgstr "Ne" #. translators: first %s is the name of the computer, for example: #. * Visible as “Bastien Nocera's Computer” followed by the #. * location of the Downloads folder. #: ../lib/bluetooth-settings-widget.c:1223 #, c-format msgid "" "Visible as “%s” and available for Bluetooth file transfers. Transferred " "files are placed in the Downloads folder." msgstr "" "Vidljiv kao “%s” i dostupan za Bluetooth prijenos datoteka. Prenešene " "datoteke su smještene u mapi Preuzimanja." #: ../lib/bluetooth-settings-widget.c:1250 #, c-format msgid "Remove '%s' from the list of devices?" msgstr "Ukloni '%s' sa liste uređaja?" #: ../lib/bluetooth-settings-widget.c:1252 msgid "" "If you remove the device, you will have to set it up again before next use." msgstr "" "Ako uklonite uređaj, prije ponovnog korištenja morate ga ponovno postaviti." #: ../lib/bluetooth-settings-widget.c:1256 msgid "_Remove" msgstr "_Ukloni" #. Translators: %s is the name of the filename received #: ../lib/bluetooth-settings-obexpush.c:145 #, c-format msgid "You received \"%s\" via Bluetooth" msgstr "Primili ste datoteku \"%s\" Bluetooth povezivanjem" #: ../lib/bluetooth-settings-obexpush.c:147 msgid "You received a file" msgstr "Primili ste datoteku" #: ../lib/bluetooth-settings-obexpush.c:158 msgid "Open File" msgstr "Otvori datoteku" #: ../lib/bluetooth-settings-obexpush.c:162 msgid "Reveal File" msgstr "Otkrij datoteku" #: ../lib/bluetooth-settings-obexpush.c:179 msgid "File reception complete" msgstr "Primanje datoteka završeno" #: ../lib/bluetooth-settings-obexpush.c:233 #, c-format msgid "Bluetooth file transfer from %s" msgstr "Bluetooth prijenos datoteke s %s" #: ../lib/bluetooth-settings-obexpush.c:243 msgid "Decline" msgstr "Odbaci" #: ../lib/bluetooth-utils.c:59 msgid "All types" msgstr "Sve vrste" #: ../lib/bluetooth-utils.c:61 msgid "Phone" msgstr "Telefon" #: ../lib/bluetooth-utils.c:63 msgid "Modem" msgstr "Modem" #: ../lib/bluetooth-utils.c:65 msgid "Computer" msgstr "Računalo" #: ../lib/bluetooth-utils.c:67 msgid "Network" msgstr "Mreža" #. translators: a hands-free headset, a combination of a single speaker with a microphone #: ../lib/bluetooth-utils.c:70 msgid "Headset" msgstr "Slušalice s mikrofonom" #: ../lib/bluetooth-utils.c:72 msgid "Headphones" msgstr "Slušalice" #: ../lib/bluetooth-utils.c:74 msgid "Audio device" msgstr "Zvučni uređaj" #: ../lib/bluetooth-utils.c:76 msgid "Keyboard" msgstr "Tipkovnica" #: ../lib/bluetooth-utils.c:78 msgid "Mouse" msgstr "Miš" #: ../lib/bluetooth-utils.c:80 msgid "Camera" msgstr "Kamera" #: ../lib/bluetooth-utils.c:82 msgid "Printer" msgstr "Pisač" #: ../lib/bluetooth-utils.c:84 msgid "Joypad" msgstr "" #: ../lib/bluetooth-utils.c:86 msgid "Tablet" msgstr "Tablet" #: ../lib/bluetooth-utils.c:88 msgid "Video device" msgstr "Video uređaj" #: ../lib/bluetooth-utils.c:90 msgid "Remote control" msgstr "Daljinski upravljač" #: ../lib/bluetooth-utils.c:92 msgid "Scanner" msgstr "Skener" #: ../lib/bluetooth-utils.c:94 msgid "Display" msgstr "Zaslon" #: ../lib/bluetooth-utils.c:96 msgid "Wearable" msgstr "Prenosivi uređaj" #: ../lib/bluetooth-utils.c:98 msgid "Toy" msgstr "Igračka" #: ../lib/settings.ui.h:1 msgid "Connection" msgstr "Povezivanje" #: ../lib/settings.ui.h:4 msgid "Address" msgstr "Adrese" #: ../lib/settings.ui.h:5 msgid "_Mouse & Touchpad Settings" msgstr "_Postavke miša i touchpada" #: ../lib/settings.ui.h:6 msgid "_Sound Settings" msgstr "_Postavke zvuka" #: ../lib/settings.ui.h:7 msgid "_Keyboard Settings" msgstr "_Postavke tipkovnice" #: ../lib/settings.ui.h:8 msgid "Send _Files…" msgstr "Pošalji _datoteku..." #: ../lib/settings.ui.h:9 msgid "_Remove Device" msgstr "_Ukloni uređaj" #: ../sendto/bluetooth-sendto.desktop.in.in.h:1 msgid "Bluetooth Transfer" msgstr "Bluetooth prijenos" #: ../sendto/bluetooth-sendto.desktop.in.in.h:2 msgid "Send files via Bluetooth" msgstr "Pošalji datoteku putem Bluetootha" #: ../sendto/main.c:117 msgid "An unknown error occurred" msgstr "Dogodila se nepoznata greška" #: ../sendto/main.c:130 msgid "" "Make sure that the remote device is switched on and that it accepts " "Bluetooth connections" msgstr "" "Pobrinite se da je udaljeni uređaj uključen i da prihvaća Bluetooth " "povezivanja" #: ../sendto/main.c:363 #, c-format msgid "%'d second" msgid_plural "%'d seconds" msgstr[0] "%'d sekunda" msgstr[1] "%'d sekunde" msgstr[2] "%'d sekundi" #: ../sendto/main.c:368 ../sendto/main.c:381 #, c-format msgid "%'d minute" msgid_plural "%'d minutes" msgstr[0] "%'d minuta" msgstr[1] "%'d minute" msgstr[2] "%'d minuta" #: ../sendto/main.c:379 #, c-format msgid "%'d hour" msgid_plural "%'d hours" msgstr[0] "%'d sat" msgstr[1] "%'d sata" msgstr[2] "%'d sati" #: ../sendto/main.c:389 #, c-format msgid "approximately %'d hour" msgid_plural "approximately %'d hours" msgstr[0] "približno %'d sat" msgstr[1] "približno %'d sata" msgstr[2] "približno %'d sati" #: ../sendto/main.c:402 ../sendto/main.c:500 msgid "Connecting…" msgstr "Povezivanje…" #: ../sendto/main.c:444 msgid "Bluetooth File Transfer" msgstr "Bluetooth prijenos datoteka" #: ../sendto/main.c:448 msgid "_Retry" msgstr "_Pokušaj ponovo" #: ../sendto/main.c:470 msgid "From:" msgstr "Šalje:" #: ../sendto/main.c:484 msgid "To:" msgstr "Prima:" #: ../sendto/main.c:577 #, c-format msgid "Sending %s" msgstr "Šaljem %s" #: ../sendto/main.c:584 ../sendto/main.c:633 #, c-format msgid "Sending file %d of %d" msgstr "Šaljem datoteku %d od %d" #: ../sendto/main.c:629 #, c-format msgid "%d kB/s" msgstr "%d kB/s" #: ../sendto/main.c:631 #, c-format msgid "%d B/s" msgstr "%d B/s" #: ../sendto/main.c:662 #, c-format msgid "%u transfer complete" msgid_plural "%u transfers complete" msgstr[0] "%u prijenos završen" msgstr[1] "%u prijenosa završena" msgstr[2] "%u prijenosa završeno" #: ../sendto/main.c:669 msgid "_Close" msgstr "_Zatvori" #: ../sendto/main.c:679 msgid "There was an error" msgstr "Dogodila se greška" #: ../sendto/main.c:734 msgid "Select device to send to" msgstr "Odaberite uređaj za slanje" #: ../sendto/main.c:739 msgid "_Send" msgstr "_Pošalji" #: ../sendto/main.c:789 msgid "Choose files to send" msgstr "Odaberi datoteke za slanje" #: ../sendto/main.c:795 msgid "Select" msgstr "Odaberi" #: ../sendto/main.c:825 msgid "Remote device to use" msgstr "Daljinski uređaj koji želite koristiti" #: ../sendto/main.c:825 msgid "ADDRESS" msgstr "ADRESA" #: ../sendto/main.c:827 msgid "Remote device's name" msgstr "Naziv daljinskog uređaja" #: ../sendto/main.c:827 msgid "NAME" msgstr "NAZIV" #: ../sendto/main.c:846 msgid "[FILE...]" msgstr "[DATOTEKA...]" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/ModemManager.po0000644000000000000000000000711212704126313021070 0ustar # Croatian translation for modemmanager # Copyright (c) 2015 Rosetta Contributors and Canonical Ltd 2015 # This file is distributed under the same license as the modemmanager package. # FIRST AUTHOR , 2015. # msgid "" msgstr "" "Project-Id-Version: modemmanager\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2015-12-03 23:46+0000\n" "PO-Revision-Date: 2015-02-19 22:33+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 07:30+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:1 msgid "Control the Modem Manager daemon" msgstr "Upravljajte pozadinskim programom Upravitelja modema" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:2 msgid "System policy prevents controlling the Modem Manager." msgstr "Pravila sustava sprječavaju upravljanje Upraviteljem modema." #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:3 msgid "Unlock and control a mobile broadband device" msgstr "Otključajte i upravljajte mobilnim širokopojasnim uređajem" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:4 msgid "" "System policy prevents unlocking or controlling the mobile broadband device." msgstr "" "Pravila sustava sprječavaju otključavanje ili upravljanje mobilnim " "širokopojasnim uređajem." #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:5 msgid "Add, modify, and delete mobile broadband contacts" msgstr "Dodaj, promjeni i obriši mobilne širokopojasne kontakte" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:6 msgid "" "System policy prevents adding, modifying, or deleting this device's contacts." msgstr "" "Pravila sustava sprječavaju dodavanje, promjenu i brisanje mobilnih " "širokopojasnih kontakata." #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:7 msgid "Send, save, modify, and delete text messages" msgstr "Pošalji, spremi, promjeni i obriši tekstovne poruke" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:8 msgid "" "System policy prevents sending or maniuplating this device's text messages." msgstr "" "Pravila sustava sprječavaju slanje ili manipuliranje s tekstovnim porukama " "ovog uređaja." #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:9 msgid "Enable and view geographic location and positioning information" msgstr "Omogući i pogledaj zemljopisnu lokaciju i informacije položaja" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:10 msgid "" "System policy prevents enabling or viewing geographic location information." msgstr "" "Pravila sustava sprječavaju omogućavanje i pogled informacija zemljopisne " "lokacije." #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:11 msgid "Query and utilize network information and services" msgstr "Upit i čekanje mrežne informacije i usluga" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:12 msgid "" "System policy prevents querying or utilizing network information and " "services." msgstr "" "Pravila sustava sprječavaju upit ili čekanje mrežne informacije i usluga" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:13 msgid "Query and manage firmware on a mobile broadband device" msgstr "Upit ili upravljanje frimverom na mobilnom širokopojasnom uređajem" #: ../data/org.freedesktop.ModemManager1.policy.in.in.h:14 msgid "System policy prevents querying or managing this device's firmware." msgstr "" "Pravila sustava sprječavaju upit ili upravljanje frimverom ovog uređaja." language-pack-gnome-hr-base/data/hr/LC_MESSAGES/gnome-settings-daemon.po0000644000000000000000000031027512704126313022747 0ustar msgid "" msgstr "" "Project-Id-Version: gnome-control-center 0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2015-12-15 10:45+0000\n" "PO-Revision-Date: 2016-03-28 20:49+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 07:26+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../data/gnome-settings-daemon.desktop.in.in.h:1 msgid "GNOME Settings Daemon" msgstr "Pozadinski program GNOME postavki" #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:1 msgid "Smartcard removal action" msgstr "Radnja pri uklanjanju pametne kartice" #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:2 msgid "" "Set this to one of \"none\", \"lock-screen\", or \"force-logout\". The " "action will get performed when the smartcard used for log in is removed." msgstr "" "Postavito ovo na jedno od \"ništa\", \"zaključaj zaslon\" ili \"prisilna " "odjava\". Radnja će se obaviti kad se pametna kartica korištena za prijavu " "ukloni." #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:3 msgid "" "Highlights the current location of the pointer when the Control key is " "pressed and released." msgstr "" "Označava trenutnu lokaciju pokazivača kad se tipka Control pritisne i " "otpusti." #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:4 msgid "Double click time" msgstr "Vrijeme dvostrukog klika" #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:5 msgid "Length of a double click in milliseconds." msgstr "Dužina dvostrukog klika u milisekundama." #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:6 msgid "Drag threshold" msgstr "Prag povlačenja" #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:7 msgid "Distance before a drag is started." msgstr "Udaljenost prije nego što se povlačenje aktivira." #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:8 msgid "Whether the tablet's orientation is locked, or rotated automatically." msgstr "" "Hoće li se orijentacija tableta zaključati ili automatski zaokrenuti." #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:9 msgid "Device hotplug custom command" msgstr "Prilagođena naredba za umetanje uređaja" #: ../data/org.gnome.settings-daemon.peripherals.gschema.xml.in.in.h:10 msgid "" "Command to be run when a device is added or removed. An exit value of 1 " "means that the device will not be handled further by gnome-settings-daemon." msgstr "" "Naredba koja će se pokrenuti kada je uređaj dodan ili uklonjen. Izlazna " "vrijednost 1 znači da uređajem ubuduće neće rukovati gnome-settings-daemon." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.datetime.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.keyboard.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.orientation.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.print-notifications.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.sharing.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:1 #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:1 msgid "Activation of this plugin" msgstr "Aktivacija ovog priključka" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.datetime.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.keyboard.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.orientation.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.print-notifications.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.sharing.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:2 #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:2 msgid "" "Whether this plugin would be activated by gnome-settings-daemon or not" msgstr "Hoće li ovaj priključak aktivirati gnome-settings-daemon" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.datetime.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.gschema.xml.in.in.h:5 #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:13 #: ../data/org.gnome.settings-daemon.plugins.keyboard.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:29 #: ../data/org.gnome.settings-daemon.plugins.orientation.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.print-notifications.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.sharing.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:3 #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:5 #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:7 msgid "Priority to use for this plugin" msgstr "Prioritet koji se koristi za ovaj priključak" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.datetime.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.gschema.xml.in.in.h:6 #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:14 #: ../data/org.gnome.settings-daemon.plugins.keyboard.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:30 #: ../data/org.gnome.settings-daemon.plugins.orientation.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.print-notifications.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.sharing.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:4 #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:6 #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:8 msgid "" "Priority to use for this plugin in gnome-settings-daemon startup queue" msgstr "" "Prioritet koji se koristi za ovaj priključak u redu pokretanja gnome-" "settings-daemona" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:5 msgid "Wacom stylus absolute mode" msgstr "Apsolutni način rada za Wacomovu olovku" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:6 msgid "Enable this to set the tablet to absolute mode." msgstr "Omogućite ovo kako biste postavili tablet u apsolutni način rada." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:7 msgid "Wacom tablet area" msgstr "Wacom tablet područje" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:8 msgid "Set this to x1, y1 and x2, y2 of the area usable by the tools." msgstr "Postavite ovo na x1, y1 i x2, y2 područja koja mogu koristiti alati." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:9 msgid "Wacom tablet aspect ratio" msgstr "Omjer slike Wacom tableta" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:10 msgid "" "Enable this to restrict the Wacom tablet area to match the aspect ratio of " "the output." msgstr "" "Omogućite ovo za ograničavanje područja Wacom tableta kako bi se podudarao s " "omjerom slike izlaza." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:11 msgid "Wacom tablet rotation" msgstr "Okretanje Wacomovog tableta" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:12 msgid "" "Set this to 'none', 'cw' for 90 degree clockwise, 'half' for 180 degree, and " "'ccw' for 90 degree counterclockwise." msgstr "" "Postavite ovo na \"ništa\", \"cw\" za 90 stupnjeva u smjeru kazaljke sata, " "\"pola\" za 180 stupnjeva i \"ccw\" za 90 stupnjeva za obrnuti smjer " "kazaljke sata." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:13 msgid "Wacom touch feature" msgstr "Wacomova dodirna značajka" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:14 msgid "Enable this to move the cursor when the user touches the tablet." msgstr "Omogućite ovo za pomicanje pokazivača kada korisnik dodirne tablet." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:15 msgid "Wacom tablet PC feature" msgstr "PC značajka Wacomovog tableta" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:16 msgid "Enable this to only report stylus events when the tip is pressed." msgstr "" "Omogućite ovo za prijavljivanje olovkinih događaja samo kad se pritisne " "njezin vrh." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:17 msgid "Wacom display mapping" msgstr "Wacom mapiranje zaslona" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:18 msgid "" "EDID information of monitor to map tablet to. Must be in the format [vendor, " "product, serial]. [\"\",\"\",\"\"] disables mapping." msgstr "" "EDID informacije monitora na koji će se mapirati tablet. Mora biti u obliku " "[proizvođač, proizvod, serijski broj]. [\"\",\"\",\"\"] onemogućava " "mapiranje." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:19 msgid "Wacom stylus pressure curve" msgstr "Krivulja pritiska za Wacomovu olovku" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:20 msgid "" "Set this to x1, y1 and x2, y2 of the pressure curve applied to the stylus." msgstr "" "Postavite ovo na x1, y1 i x2, y2 krivulje pritiska koja se primjenjuje na " "olovku." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:21 msgid "Wacom stylus button mapping" msgstr "Mapiranje tipke za Wacomovu olovku" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:22 msgid "Set this to the logical button mapping." msgstr "Postavite ovo na logično mapiranje tipka." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:23 msgid "Wacom stylus pressure threshold" msgstr "Prag pritiska za Wacomovu olovku" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:24 msgid "" "Set this to the pressure value at which a stylus click event is generated." msgstr "" "Postavite ovo na vrijednost pritiska pri kojem se stvara događaj za olovku." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:25 msgid "Wacom eraser pressure curve" msgstr "Krivulja pritiska Wacomove gumice za brisanje" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:26 msgid "" "Set this to x1, y1 and x2, y2 of the pressure curve applied to the eraser." msgstr "" "Postavite ovo na x1, y1 i x2, y2 krivulje pritiska koja se primjenjuje na " "gumicu za brisanje." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:27 msgid "Wacom eraser button mapping" msgstr "Mapiranje tipke za Wacomovu gumicu za brisanje" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:28 msgid "Wacom eraser pressure threshold" msgstr "Prag pritiska Wacomove gumice za brisanje" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:29 msgid "" "Set this to the pressure value at which an eraser click event is generated." msgstr "" "Postavite ovo na vrijednost pritiska pri kojem se stvara događaj za gumicu " "za brisanje." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:30 msgid "Wacom button action type" msgstr "Wacom vrsta radnje tipke" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:31 msgid "The type of action triggered by the button being pressed." msgstr "Vrsta radnje za obaviti kad se pritisne tipka." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:32 msgid "Key combination for the custom action" msgstr "Kombinacija tipki za prilagođenu radnju" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:33 msgid "" "The keyboard shortcut generated when the button is pressed for custom " "actions." msgstr "" "Stvoren je prečac tipkovnice kada se pritisne tipka za prilagođene radnje." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:34 msgid "Key combinations for a touchring or touchstrip custom action" msgstr "" "Kombinacija tipki za prilagođenu radnju dodirnog prstena ili dodirne trake" #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:35 msgid "" "The keyboard shortcuts generated when a touchring or touchstrip is used for " "custom actions (up followed by down)." msgstr "" "Stvoren je prečac tipkovnice kada se koristi dodirni prsten ili dodirna " "traka za prilagođene radnje (gore slijedi dolje)." #. Translators: This is the OLED display on an Intuos4 tablet: #. http://eu.shop.wacom.eu/images/articles/d9abd9f2d4d88aa0649cda97a8077e2b_8.jpg #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:38 msgid "Button label for OLED display." msgstr "Oznaka tipke za OLED zaslon." #: ../data/org.gnome.settings-daemon.peripherals.wacom.gschema.xml.in.in.h:39 msgid "Label will be rendered to OLED display belonging to the button" msgstr "Oznaka će biti prikazana na OLED zaslonu pripadajeuće tipke" #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:5 msgid "The duration a display profile is valid" msgstr "Trajanje valjanosti zaslonskog profila" #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:6 msgid "" "This is the number of days after which the display color profile is " "considered invalid." msgstr "" "Ovo je broj dana nakon kojih se profil zaslonskih boja smatra nevaljanim." #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:7 msgid "The duration a printer profile is valid" msgstr "Trajanje valjanosti profila pisača" #: ../data/org.gnome.settings-daemon.plugins.color.gschema.xml.in.in.h:8 msgid "" "This is the number of days after which the printer color profile is " "considered invalid." msgstr "Ovo je broj dana nakon kojih se profil pisača smatra nevaljanim." #: ../data/org.gnome.settings-daemon.plugins.gschema.xml.in.in.h:1 msgid "List of plugins that are allowed to be loaded" msgstr "Popis priključaka kojima je dopušteno učitavanje" #: ../data/org.gnome.settings-daemon.plugins.gschema.xml.in.in.h:2 msgid "" "A list of strings representing the plugins that are allowed to be loaded " "(default: 'all'). The plugins still need to be marked as active to get " "loaded. This is only evaluated on startup." msgstr "" "Nizovi znakova koji predstavljaju priključke kojima je dopušteno učitavanje " "(zadano: 'all'). Ti priključci još uvijek trebaju biti označeni kao aktivni " "kako bi bili učitani. To je potrebno samo pri pokretanju." #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:3 msgid "Mount paths to ignore" msgstr "Montirne putanje za zanemarivanje" #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:4 msgid "Specify a list of mount paths to ignore when they run low on space." msgstr "" "Odredite popis montirnih putanja koje će se zanemariti kada će imati malo " "slobodnog prostora." #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:5 msgid "Free percentage notify threshold" msgstr "Prag pri kojem se javlja obavijest o postotku slobodnog prostora" #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:6 msgid "" "Percentage free space threshold for initial warning of low disk space. If " "the percentage free space drops below this, a warning will be shown." msgstr "" "Prag slobodnog prostora za koji se prvotno javlja upozorenje o pomanjkanju " "diskovnog prostora. Ako postotak slobodnog prostora padne ispod ovog praga, " "pokazati će se upozorenje." #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:7 msgid "Subsequent free space percentage notify threshold" msgstr "Prag naknadne obavijesti o slobodnom prostoru" #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:8 msgid "" "Specify the percentage that the free disk space should reduce by before " "issuing a subsequent warning." msgstr "" "Odredite za koji se postotak treba smanjiti slobodni prostor kako bi se " "izdalo upozorenje." #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:9 msgid "Free space notify threshold" msgstr "Prag pri kojem se javlja obavijest o slobodnom prostoru" #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:10 msgid "" "Specify an amount in GB. If the amount of free space is more than this, no " "warning will be shown." msgstr "" "Odredite količinu u GB. Ako je količina slobodnog prostora veća od ovoga, " "neće se pokazati upozorenje." #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:11 msgid "Minimum notify period for repeated warnings" msgstr "Najmanje vrijeme obavijesti za ponavljana upozorenja" #: ../data/org.gnome.settings-daemon.plugins.housekeeping.gschema.xml.in.in.h:12 msgid "" "Specify a time in minutes. Subsequent warnings for a volume will not appear " "more often than this period." msgstr "" "Odredite vrijeme u minutama. Daljnja upozorenja za uređaj se neće " "pojavljivati češće od ovog vremena." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:3 msgid "Custom keybindings" msgstr "Prilagođeni prečaci tipkovnice" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:4 msgid "List of custom keybindings" msgstr "Popis prilagođenih prečaca tipkovnice" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:5 msgid "Launch calculator" msgstr "Pokreni kalkulator" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:6 msgid "Binding to launch the calculator." msgstr "Prečac tipkovnice za pokretanje kalkulatora." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:7 msgid "Launch settings" msgstr "Pokreni postavke" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:8 msgid "Binding to launch GNOME settings." msgstr "Prečac tipkovnice za pokretanje GNOME postavki." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:9 msgid "Launch email client" msgstr "Pokreni klijent e-pošte" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:10 msgid "Binding to launch the email client." msgstr "Prečac tipkovnice za pokretanje klijenta e-pošte." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:11 msgid "Eject" msgstr "Izbaci" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:12 msgid "Binding to eject an optical disc." msgstr "Prečac tipkovnice za izbacivanje optičkog diska." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:13 msgid "Launch help browser" msgstr "Pokreni preglednik pomoći" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:14 msgid "Binding to launch the help browser." msgstr "Prečac tipkovnice za pokretanje preglednika pomoći." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:15 msgid "Home folder" msgstr "Osobna mapa" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:16 msgid "Binding to open the Home folder." msgstr "Prečac tipkovnice za otvaranje osobne mape." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:17 msgid "Launch media player" msgstr "Pokreni medijski reproduktor" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:18 msgid "Binding to launch the media player." msgstr "Prečac tipkovnice za pokretanje medijskog reproduktora." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:19 msgid "Next track" msgstr "Sljedeća pjesma" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:20 msgid "Binding to skip to next track." msgstr "Prečac tipkovnice za sljedeću pjesmu." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:21 msgid "Pause playback" msgstr "Pauziraj reprodukciju" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:22 msgid "Binding to pause playback." msgstr "Prečac tipkovnice za pauziranje reprodukcije." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:23 msgid "Play (or play/pause)" msgstr "Reprodukcija ili pauza" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:24 msgid "Binding to start playback (or toggle play/pause)." msgstr "Prečac tipkovnice za početak reprodukcije ili pauze." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:25 msgid "Log out" msgstr "Odjavi se" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:26 msgid "Binding to log out." msgstr "Prečac tipkovnice za odjavu." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:27 msgid "Previous track" msgstr "Prijašnja pjesma" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:28 msgid "Binding to skip to previous track." msgstr "Prečac tipkovnice za prijašnju pjesmu." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:31 msgid "Lock screen" msgstr "Zaključaj zaslon" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:32 msgid "Binding to lock the screen." msgstr "Prečac tipkovnice za zaključavanje zaslona." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:33 msgid "Search" msgstr "Pretraži" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:34 msgid "Binding to launch the search tool." msgstr "Prečac tipkovnice za pokretanje alata pretraživanja." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:35 msgid "Stop playback" msgstr "Zaustavi reprodukciju" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:36 msgid "Binding to stop playback." msgstr "Prečac tipkovnice za zaustavljanje reprodukcije." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:37 msgid "Video output" msgstr "Video izlaz" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:38 msgid "Binding to switch the video output device." msgstr "Prečac tipkovnice za prebacivanje uređaja video izlaza." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:39 msgid "Volume down" msgstr "Smanji glasnoću zvuka" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:40 msgid "Binding to lower the system volume." msgstr "Prečac tipkovnice za smanjivanje glasnoće zvuka sustava." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:41 msgid "Volume mute" msgstr "Utišaj zvuk" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:42 msgid "Binding to mute the system volume." msgstr "Prečac tipkovnice za utišavanje glasnoće zvuka sustava." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:43 msgid "Volume up" msgstr "Pojačaj glasnoću zvuka" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:44 msgid "Binding to raise the system volume." msgstr "Prečac tipkovnice za pojačavanje glasnoće zvuka sustava." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:45 msgid "Take a screenshot" msgstr "Uslikaj zaslon" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:46 msgid "Binding to take a screenshot." msgstr "Prečac tipkovnice za uslikavanje zaslona." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:47 msgid "Take a screenshot of a window" msgstr "Uslikaj prozor" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:48 msgid "Binding to take a screenshot of a window." msgstr "Prečac tipkovnice za uslikavanje prozora." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:49 msgid "Take a screenshot of an area" msgstr "Uslikaj područje" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:50 msgid "Binding to take a screenshot of an area." msgstr "Prečac tipkovnice za uslikavanje područja." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:51 msgid "Copy a screenshot to clipboard" msgstr "Kopiraj sliku zaslona u međuspremnik" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:52 msgid "Binding to copy a screenshot to clipboard." msgstr "Prečac tipkovnice za kopiranje slike zaslona u međuspremnik." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:53 msgid "Copy a screenshot of a window to clipboard" msgstr "Kopiraj sliku prozora u međuspremnik" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:54 msgid "Binding to copy a screenshot of a window to clipboard." msgstr "Prečac tipkovnice za kopiranje slike prozora u međuspremnik." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:55 msgid "Copy a screenshot of an area to clipboard" msgstr "Kopiraj sliku područja u međuspremnik" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:56 msgid "Binding to copy a screenshot of an area to clipboard." msgstr "Prečac tipkovnice za kopiranje slike područja u međuspremnik." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:57 msgid "Record a short video of the screen" msgstr "Snimi kratku video snimku zaslona" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:58 msgid "Launch terminal" msgstr "Pokreni terminal" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:59 msgid "Binding to launch the terminal." msgstr "Prečac tipkovnice za pokretanje terminala." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:60 msgid "Launch web browser" msgstr "Pokreni internetski preglednik" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:61 msgid "Binding to launch the web browser." msgstr "Prečac tipkovnice za pokretanje internetskog preglednika." #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:62 msgid "Toggle magnifier" msgstr "Uključi/isključi povećalo" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:63 msgid "Binding to show the screen magnifier" msgstr "Prečac tipkovnice za prikazivanje zaslonskog povećala" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:64 msgid "Toggle screen reader" msgstr "Uključi/isključi zaslonski čitač" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:65 msgid "Binding to start the screen reader" msgstr "Prečac tipkovnice za zaslonski čitač" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:66 msgid "Toggle on-screen keyboard" msgstr "Uključi/isključi zaslonsku tipkovnicu" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:67 msgid "Binding to show the on-screen keyboard" msgstr "Prečac tipkovnice za prikazivanje zaslonske tipkovnice" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:68 msgid "Increase text size" msgstr "Povećaj veličinu teksta" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:69 msgid "Binding to increase the text size" msgstr "Prečac tipkovnice za povećanje veličine teksta" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:70 msgid "Decrease text size" msgstr "Smanji veličinu teksta" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:71 msgid "Binding to decrease the text size" msgstr "Prečac tipkovnice za smanjenje veličine teksta" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:72 msgid "Toggle contrast" msgstr "Uključi/isključi kontrast" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:73 msgid "Binding to toggle the interface contrast" msgstr "Prečac tipkovnice za uključivanje/isključivanje kontrasta sučelja" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:74 msgid "Magnifier zoom in" msgstr "Približi povećalom" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:75 msgid "Binding for the magnifier to zoom in" msgstr "Prečac tipkovnice za približenje povećalom" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:76 msgid "Magnifier zoom out" msgstr "Udalji povećalom" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:77 msgid "Binding for the magnifier to zoom out" msgstr "Prečac tipkovnice za udaljenje povećalom" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:78 msgid "Name" msgstr "Naziv" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:79 msgid "Name of the custom binding" msgstr "Naziv prilagođenog prečaca tipkovnice" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:80 msgid "Binding" msgstr "Pridruživanje" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:81 msgid "Binding for the custom binding" msgstr "Pridruživanje prilagođenog prečaca tipkovnice" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:82 msgid "Command" msgstr "Naredba" #: ../data/org.gnome.settings-daemon.plugins.media-keys.gschema.xml.in.in.h:83 msgid "Command to run when the binding is invoked" msgstr "Naredba koja će se pokrenuti kada je prečac pokrenut" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:5 msgid "Percentage considered low" msgstr "Postotak smatran slabim" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:6 msgid "" "The percentage of the battery when it is considered low. Only valid when use-" "time-for-policy is false." msgstr "" "Postotak baterije koji se smatra slabim. Valjano samo kad je \"koristi " "vrijeme kao pravilo\" false." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:7 msgid "Percentage considered critical" msgstr "Postotak smatran kritičnim" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:8 msgid "" "The percentage of the battery when it is considered critical. Only valid " "when use-time-for-policy is false." msgstr "" "Postotak baterije koji se smatra kritičnim. Valjano samo kad je \"koristi " "vrijeme kao pravilo\" false." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:9 msgid "Percentage action is taken" msgstr "Potrebno je poduzeti radnju u postocima" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:10 msgid "" "The percentage of the battery when the critical action is performed. Only " "valid when use-time-for-policy is false." msgstr "" "Postotak baterije za koji se obavlja kritična radnja. Valjano samo kad je " "\"koristi vrijeme kao pravilo\" false." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:11 msgid "The time remaining when low" msgstr "Preostalo vrijeme kad je slaba" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:12 msgid "" "The time remaining in seconds of the battery when it is considered low. Only " "valid when use-time-for-policy is true." msgstr "" "Preostalo vrijeme baterije u sekundama koje se smatra niskim. Valjano samo " "kad je \"koristi vrijeme kao pravilo\" true." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:13 msgid "The time remaining when critical" msgstr "Preostalo vrijeme kad je kritična" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:14 msgid "" "The time remaining in seconds of the battery when it is considered critical. " "Only valid when use-time-for-policy is true." msgstr "" "Preostalo vrijeme baterije u sekundama koje se smatra kritičnim. Valjano " "samo kad je \"koristi vrijeme kao pravilo\" true." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:15 msgid "The time remaining when action is taken" msgstr "Preostalo vrijeme kad se poduzme radnja" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:16 msgid "" "The time remaining in seconds of the battery when critical action is taken. " "Only valid when use-time-for-policy is true." msgstr "" "Preostalo vrijeme baterije u sekundama kad se poduzima kritična radnja. " "Valjano samo kad je \"koristi vrijeme kao pravilo\" true." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:17 msgid "Whether to use time-based notifications" msgstr "Trebaju li se koristiti vremenske obavijesti" #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:18 msgid "" "If time based notifications should be used. If set to false, then the " "percentage change is used instead, which may fix a broken ACPI BIOS." msgstr "" "Treba li koristiti vremenske obavijesti. Ako je postavljeno da ih ne treba " "koristiti, pokazuje se promjena u postocima, koja može popraviti uništeni " "ACPI BIOS." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:19 msgid "If we should show the recalled battery warning for a broken battery" msgstr "" "Treba li prikazati upozorenje o bateriji povučenoj s tržišta za neispravnu " "bateriju." #: ../data/org.gnome.settings-daemon.plugins.power.gschema.xml.in.in.h:20 msgid "" "If we should show the recalled battery warning for a broken battery. Set " "this to false only if you know your battery is okay." msgstr "" "Treba li pokazati upozorenje o bateriji povučenoj s tržišta za neispravnu " "bateriju. Ovo treba isključiti samo u slučaju kada znate da je baterija u " "redu." #: ../data/org.gnome.settings-daemon.plugins.sharing.gschema.xml.in.in.h:5 msgid "On which connections the service is enabled" msgstr "Pri kojim povezivanjima je usluga omogućena" #: ../data/org.gnome.settings-daemon.plugins.sharing.gschema.xml.in.in.h:6 msgid "" "The list of NetworkManager connections (each one represented with its UUID) " "on which this service is enabled and started." msgstr "" "Popis povezivanja Mrežnog upravitelja (svako predstavljeno sa svojim UUID-" "ijem) s kojima je ova usluga omogućena i pokrenuta." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:5 msgid "Use mobile broadband connections" msgstr "Koristi širokopojasno mobilno povezivanje" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:6 msgid "" "Use mobile broadband connections such as GSM and CDMA to check for updates." msgstr "" "Koristi širokopojasno mobilno povezivanje poput GSM-a ili CDMA-a pri " "provjeri nadopuna." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:7 msgid "Automatically download updates in the background without confirmation" msgstr "Automatski preuzimaj nadopune u pozadini bez potvrde korisnika" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:8 msgid "" "Automatically download updates in the background without confirmation. " "Updates will be auto-downloaded when using wired network connnections, and " "mobile broadband if 'connection-use-mobile' is enabled." msgstr "" "Automatski preuzmi nadopune u pozadini bez potvrde. Nadopune će biti " "automatski preuzete kad se koristi žičana mrežno povezivanje i mobilno " "širkopojasno povezianje ako je 'connection-use-mobile' omogućeno." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:9 msgid "How often to check for updates" msgstr "Koliko često će se provjeravati nadopune" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:10 msgid "" "How often to check for updates. Value is in seconds. This is a maximum " "amount of time that can pass between a security update being published, and " "the update being automatically installed or the user notified." msgstr "" "Koliko često će se provjeravati nadopune. Vrijednost je u sekundama. Ovo " "predstavlja najviše vrijeme koje može proći između izdavanja sigurnosne " "nadopune i njezine automatske instalacije ili obavještavanja korisnika." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:11 msgid "How often to notify the user that non-critical updates are available" msgstr "" "Koliko često će se obaviještavati korisnika o dostupnosti nekritičnih " "fadopuna" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:12 msgid "" "How often to tell the user there are non-critical updates. Value is in " "seconds. Security update notifications are always shown after the check for " "updates, but non-critical notifications should be shown a lot less " "frequently." msgstr "" "Koliko često će se govoriti korisniku o dostupnosti nekritičnih nadopuna. " "Vrijednost je u sekundama. Obavijesti o sigurnosnim nadopunama se uvijek " "pokazuju pri provjeri nadopuna dok se nekritične nadopune pokazuju rjeđe." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:13 msgid "The last time we told the user about non-critical notifications" msgstr "Posljednji put kad smo rekli korisniku o nekritičnim obavijestima" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:14 msgid "" "The last time we notified the user about non-critical updates. Value is in " "seconds since the epoch, or zero for never." msgstr "" "Posljednji put kad je korisnik obaviješten o nekritičnim nadopunama. " "Vrijednost je u sekundama od epohe ili nula za nikad." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:15 msgid "How often to check for distribution upgrades" msgstr "Koliko često će se provjeravati nadogradnje distribucije" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:16 msgid "How often to check for distribution upgrades. Value is in seconds." msgstr "" "Koliko često će se provjeravati nadogradnje distribucije. Vrijednost je u " "sekundama." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:17 msgid "How often to refresh the package cache" msgstr "Koliko često će se osvježavati predmemorija paketa" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:18 msgid "How often to refresh the package cache. Value is in seconds." msgstr "" "Koliko često će se osvježavati predmemorija paketa. Vrijednost je u " "sekundama." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:19 msgid "Check for updates when running on battery power" msgstr "Provjeri nadopune kada se koristi energija baterije" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:20 msgid "Check for updates when running on battery power." msgstr "Provjeri nadopune kada se koristi energija baterije." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:21 msgid "Notify the user when distribution upgrades are available" msgstr "Obavijesti korisnika o dostupnosti nadogradnje distribucije" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:22 msgid "Notify the user when distribution upgrades are available." msgstr "Obavijesti korisnika o dostupnosti nadogradnje distribucije." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:23 msgid "Ask the user if additional firmware should be installed" msgstr "Pitaj korisnika treba li se instalirati dodatni firmware" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:24 msgid "" "Ask the user if additional firmware should be installed if it is available." msgstr "" "Pitaj korisnika treba li se instalirati dodatni firmware ako je dostupan." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:25 msgid "Firmware files that should not be searched for" msgstr "Datoteke firmvera koje se ne moraju tražiti" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:26 msgid "" "Firmware files that should not be searched for, separated by commas. These " "can include '*' and '?' characters." msgstr "" "Datoteke firmvera koje se ne moraju tražiti, odvojene zarezom. Ovo uključuje " "znakove \"*\" i \"?\"." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:27 msgid "Devices that should be ignored" msgstr "Uređaji koji bi se trebali zanemariti" #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:28 msgid "" "Devices that should be ignored, separated by commas. These can include '*' " "and '?' characters." msgstr "" "Uređaji koji bi se trebali zanemariti, odvojeni zarezom. Ovo uključuje " "znakove \"*\" i \"?\"." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:29 msgid "The filenames on removable media that designate it a software source." msgstr "" "Nazivi datoteka na uklonjivom mediju koja ga označavaju kao izvor softvera." #: ../data/org.gnome.settings-daemon.plugins.updates.gschema.xml.in.in.h:30 msgid "" "When removable media is inserted, it is checked to see if it contains any " "important filenames in the root directory. If the filename matches, then an " "updates check is performed. This allows post-install disks to be used to " "update running systems." msgstr "" "Kad se ubaci uklonjivi medij, provjerava se postoje li važni nazivi datoteka " "u korijenskom direktoriju. Ako se pronađe naziv datoteke, pokreće se " "nadopuna. Ovime se trenutni sustavi mogu nadopuniti diskovima nakon " "instalacije." #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:3 msgid "File for default configuration for RandR" msgstr "Datoteka za uobičajeno podešenje RandR-a" #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:4 msgid "" "The XRandR plugin will look for a default configuration in the file " "specified by this key. This is similar to the ~/.config/monitors.xml that " "normally gets stored in users' home directories. If a user does not have " "such a file, or has one that does not match the user's setup of monitors, " "then the file specified by this key will be used instead." msgstr "" "XRandR priključak će potražiti uobičajena podešavnja u datoteci određenoj " "ovim ključem. Ovo je slično ~/.config/monitors.xml koja se inače sprema u " "korisnikovu osobnu mapu. Ako korisnik nema takvu datoteku ili ima onu koja " "ne odgovara trenutnoj postavi monitora, onda će se koristiti datoteka " "određena ovim ključem." #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:7 msgid "Whether to turn off specific monitors after boot" msgstr "Hoće li se isključiti određeni monitori nakon uključivanja računala" #: ../data/org.gnome.settings-daemon.plugins.xrandr.gschema.xml.in.in.h:8 msgid "" "'clone' will display the same thing on all monitors, 'dock' will switch off " "the internal monitor, 'do-nothing' will use the default Xorg behaviour " "(extend the desktop in recent versions). The default, 'follow-lid', will " "choose between 'do-nothing' and 'dock' depending on whether the lid is " "(respectively) open or closed." msgstr "" "'clone' će prikazati jednake stvari na svim zaslonima, 'dock' će isključiti " "unutrašnji zaslon, 'do-nothing' će koristiti zadano Xorg ponašanje (proširi " "radnu površinu u nedavnim inačicama). Zadano, 'follow-lid', će odabrati " "između 'do-nothing' i 'dock' ovisno je li lid (za svaki posebno) otvoren ili " "zatvoren." #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:3 msgid "Antialiasing" msgstr "Zaglađivanje rubova" #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:4 msgid "" "The type of antialiasing to use when rendering fonts. Possible values are: " "\"none\" for no antialiasing, \"grayscale\" for standard grayscale " "antialiasing, and \"rgba\" for subpixel antialiasing (LCD screens only)." msgstr "" "Vrsta zaglađivanja rubova koje će se koristiti kad se prikazuju slova. " "Moguće vrijednosti su: \"ništa\" za isključivanje zaglađivanja, \"sivo\" za " "standardno sivo zaglađivanje i \"rgba\" za podpikselno zaglađivanje (samo " "LCD zasloni)." #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:5 msgid "Hinting" msgstr "Savjetovanje" #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:6 msgid "" "The type of hinting to use when rendering fonts. Possible values are: " "\"none\" for no hinting, \"slight\" for basic, \"medium\" for moderate, and " "\"full\" for maximum hinting (may cause distortion of letter forms)." msgstr "" "Vrsta savjeta koji će se koristiti pri prikazivanju slova. Moguće " "vrijednosti su: \"ništa\" bez savjeta, \"malo\" za osnovne, \"srednje\" za " "umjerene i \"potpuno\" za maksimalne savjete (može uzrokovati izobličenje " "oblika slova)." #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:9 msgid "RGBA order" msgstr "RGBA poredak" #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:10 msgid "" "The order of subpixel elements on an LCD screen; only used when antialiasing " "is set to \"rgba\". Possible values are: \"rgb\" for red on left (most " "common), \"bgr\" for blue on left, \"vrgb\" for red on top, \"vbgr\" for red " "on bottom." msgstr "" "Poredak podpikselnih elemenata na LCD zaslonu; koristi se samo kad je " "zaglađivanje rubova postavljeno na \"rgba\". Moguće vrijednosti su: \"rgb\" " "za crveno lijevo (najčešće), \"bgr\" za plavo lijevo, \"vgrb\" za crveno na " "vrhu, \"vbgr\" za crveno na dnu." #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:11 msgid "List of explicitly disabled GTK+ modules" msgstr "Popis eksplicitno onemogućenih GTK+ modula" #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:12 msgid "" "A list of strings representing the GTK+ modules that will not be loaded, " "even if enabled by default in their configuration." msgstr "" "Nizovi znakova koji predstavljaju GTK+ module koji se neće učitati, čak i " "ako su omogućeni u njihovim podešenjima." #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:13 msgid "List of explicitly enabled GTK+ modules" msgstr "Popis eksplicitno omogućenih GTK+ modula" #: ../data/org.gnome.settings-daemon.plugins.xsettings.gschema.xml.in.in.h:14 msgid "" "A list of strings representing the GTK+ modules that will be loaded, usually " "in addition to conditional and forcibly disabled ones." msgstr "" "Nizovi znakova koji predstavljaju GTK+ module koji če se učitati obično uz " "uvjetne module i prisilno onemogućene." #: ../gnome-settings-daemon/main.c:53 msgid "Enable debugging code" msgstr "Omogući ispravljanje grešaka" #: ../gnome-settings-daemon/main.c:54 msgid "Replace existing daemon" msgstr "Zamijeni postojeći pozadinski program" #: ../gnome-settings-daemon/main.c:55 msgid "Exit after a time (for debugging)" msgstr "Izađi nakon vremena (za otklanjanje grešaka)" #: ../plugins/a11y-keyboard/a11y-keyboard.gnome-settings-plugin.in.h:1 msgid "Accessibility Keyboard" msgstr "Pristupačna tipkovnica" #: ../plugins/a11y-keyboard/a11y-keyboard.gnome-settings-plugin.in.h:2 msgid "Accessibility keyboard plugin" msgstr "Priključak pristupačnosti tipkovnice" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:398 msgid "Slow Keys Turned On" msgstr "Uključene spore tipke" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:399 msgid "Slow Keys Turned Off" msgstr "Isključene spore tipke" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:400 msgid "" "You just held down the Shift key for 8 seconds. This is the shortcut for " "the Slow Keys feature, which affects the way your keyboard works." msgstr "" "Upravo ste držali Shift tipku pritisnutu 8 sekundi. Ovo je prečac za spore " "tipke, što utječe na način na koji tipkovnica radi." #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:410 #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:478 msgid "Universal Access" msgstr "Univerzalni pristup" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:416 #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:484 msgid "Turn Off" msgstr "Isključi" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:416 #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:484 msgid "Turn On" msgstr "Uključi" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:422 #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:490 msgid "Leave On" msgstr "Ostavi uključeno" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:422 #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:490 msgid "Leave Off" msgstr "Ostavi isključeno" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:463 msgid "Sticky Keys Turned On" msgstr "Uključene ljepljive tipke" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:464 msgid "Sticky Keys Turned Off" msgstr "Isključene ljepljive tipke" #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:466 msgid "" "You just pressed the Shift key 5 times in a row. This is the shortcut for " "the Sticky Keys feature, which affects the way your keyboard works." msgstr "" "Pritisnuli ste Shift tipku 5 puta zaredom. Ovo je prečac za ljepljive tipke, " "što utječe na način na koji tipkovnica radi." #: ../plugins/a11y-keyboard/gsd-a11y-keyboard-manager.c:468 msgid "" "You just pressed two keys at once, or pressed the Shift key 5 times in a " "row. This turns off the Sticky Keys feature, which affects the way your " "keyboard works." msgstr "" "Pritisnuli ste dvije tipke odjednom, ili ste pritisnuli Shift tipku 5 puta " "zaredom. To uključuje ljepljive tipke, što utječe na način na koji " "tipkovnica radi." #: ../plugins/a11y-settings/a11y-settings.gnome-settings-plugin.in.h:1 msgid "Accessibility settings" msgstr "Postavke pristupačnosti" #: ../plugins/a11y-settings/a11y-settings.gnome-settings-plugin.in.h:2 msgid "Accessibility settings plugin" msgstr "Priključak postavki pristupačnosti" #. Priority=100 #: ../plugins/clipboard/clipboard.gnome-settings-plugin.in.h:2 msgid "Clipboard" msgstr "Međuspremnik" #: ../plugins/clipboard/clipboard.gnome-settings-plugin.in.h:3 msgid "Clipboard plugin" msgstr "Priključak međuspremnika" #: ../plugins/color/color.gnome-settings-plugin.in.h:1 #: ../plugins/color/gsd-color-calibrate.c:139 msgid "Color" msgstr "Boja" #: ../plugins/color/color.gnome-settings-plugin.in.h:2 msgid "Color plugin" msgstr "Priključak boja" #: ../plugins/color/gsd-color-calibrate.c:144 msgid "Recalibrate now" msgstr "Odmah rekalibriraj" #. TRANSLATORS: this is when the device has not been recalibrated in a while #: ../plugins/color/gsd-color-calibrate.c:187 msgid "Recalibration required" msgstr "Potrebna rekalibracija" #. TRANSLATORS: this is when the display has not been recalibrated in a while #: ../plugins/color/gsd-color-calibrate.c:199 #, c-format msgid "The display '%s' should be recalibrated soon." msgstr "Zaslon \"%s\" bi uskoro trebao biti rekalibriran." #. TRANSLATORS: this is when the printer has not been recalibrated in a while #: ../plugins/color/gsd-color-calibrate.c:208 #, c-format msgid "The printer '%s' should be recalibrated soon." msgstr "Pisač \"%s\" bi uskoro trebao biti rekalibriran." #. TRANSLATORS: this is the application name #: ../plugins/color/gsd-color-calibrate.c:346 #: ../plugins/color/gsd-color-calibrate.c:362 msgid "GNOME Settings Daemon Color Plugin" msgstr "Priključak za boje pozadinskog programa GNOME postavki" #. TRANSLATORS: this is a sound description #: ../plugins/color/gsd-color-calibrate.c:348 msgid "Color calibration device added" msgstr "Uređaj za kalibraciju boje dodan" #. TRANSLATORS: this is a sound description #: ../plugins/color/gsd-color-calibrate.c:364 msgid "Color calibration device removed" msgstr "Uređaj za kalibraciju boje uklonjen" #. Priority=100 #: ../plugins/datetime/datetime.gnome-settings-plugin.in.h:2 msgid "Date and Time" msgstr "Datum i vrijeme" #: ../plugins/datetime/datetime.gnome-settings-plugin.in.h:3 msgid "Automatically update timezone" msgstr "Automatski nadopuni vremensku zonu" #. Translators: UTC here means the Coordinated Universal Time. #. * %:::z will be replaced by the offset from UTC e.g. UTC+02 #: ../plugins/datetime/gsd-datetime-manager.c:88 msgid "UTC%:::z" msgstr "UTC%:::z" #: ../plugins/datetime/gsd-datetime-manager.c:92 #, c-format msgid "Time Zone Updated to %s (%s)" msgstr "Vremenska zona ažurirana na %s (%s)" #: ../plugins/datetime/gsd-datetime-manager.c:108 msgid "Settings" msgstr "Postavke" #: ../plugins/datetime/gsd-datetime-manager.c:118 msgid "Date & Time Settings" msgstr "Datum i vremenske postavke" #: ../plugins/dummy/dummy.gnome-settings-plugin.in.h:1 msgid "Dummy" msgstr "Lažan" #: ../plugins/dummy/dummy.gnome-settings-plugin.in.h:2 msgid "Dummy plugin" msgstr "Priključak lažan" #: ../plugins/housekeeping/gsd-disk-space.c:587 #, c-format msgid "Low Disk Space on “%s”" msgstr "Premalo slobodnog diskovnog prostora na “%s”" #: ../plugins/housekeeping/gsd-disk-space.c:589 #, c-format msgid "" "The volume “%s” has only %s disk space remaining. You may free up some " "space by emptying the trash." msgstr "" "Uređaju \"%s\" je preostalo samo %s slobodnog diskovnog prostora. Možete " "osloboditi nešto prostora pražnjenjem smeća." #: ../plugins/housekeeping/gsd-disk-space.c:593 #, c-format msgid "The volume “%s” has only %s disk space remaining." msgstr "Uređaju \"%s\" je preostalo samo %s slobodnog diskovnog prostora." #: ../plugins/housekeeping/gsd-disk-space.c:598 msgid "Low Disk Space" msgstr "Premalo slobodnog diskovnog prostora" #: ../plugins/housekeeping/gsd-disk-space.c:600 #, c-format msgid "" "This computer has only %s disk space remaining. You may free up some space " "by emptying the trash." msgstr "" "Ovom računalo je preostalo samo %s slobodnog diskovnog prostora. Možete " "osloboditi nešto prostora pražnjenjem smeća." #: ../plugins/housekeeping/gsd-disk-space.c:603 #, c-format msgid "This computer has only %s disk space remaining." msgstr "Ovom računalu je preostalo samo %s slobodnog diskovnog prostora." #: ../plugins/housekeeping/gsd-disk-space.c:618 msgid "Disk space" msgstr "Diskovni prostor" #: ../plugins/housekeeping/gsd-disk-space.c:625 msgid "Examine" msgstr "Istraži" #: ../plugins/housekeeping/gsd-disk-space.c:633 msgid "Empty Trash" msgstr "Isprazni smeće" #: ../plugins/housekeeping/gsd-disk-space.c:640 msgid "Ignore" msgstr "Zanemari" #: ../plugins/housekeeping/housekeeping.gnome-settings-plugin.in.h:1 msgid "Housekeeping" msgstr "Pospremanje" #: ../plugins/housekeeping/housekeeping.gnome-settings-plugin.in.h:2 msgid "" "Automatically prunes thumbnail caches and other transient files, and warns " "about low disk space" msgstr "" "Automatski uklanja predmemoriju minijatura i ostalih privremenih datoteka, i " "upozorava na nedostatak slobodnog diskovnog prostora" #: ../plugins/keyboard/keyboard.gnome-settings-plugin.in.h:1 msgid "Keyboard" msgstr "Tipkovnica" #: ../plugins/keyboard/keyboard.gnome-settings-plugin.in.h:2 msgid "Keyboard plugin" msgstr "Priključak tipkovnice" #: ../plugins/media-keys/gsd-media-keys-manager.c:2040 msgid "Screencast from %d %t.webm" msgstr "Snimak zaslona od %d %t.webm" #: ../plugins/media-keys/gsd-screenshot-utils.c:84 msgid "Unable to capture a screenshot" msgstr "Nemoguće uslikati" #: ../plugins/media-keys/gsd-screenshot-utils.c:115 #: ../plugins/media-keys/gsd-screenshot-utils.c:155 msgid "Screenshot taken" msgstr "Zaslon uslikan" #. translators: this is the name of the file that gets made up #. * with the screenshot #: ../plugins/media-keys/gsd-screenshot-utils.c:304 #, c-format msgid "Screenshot from %s" msgstr "Slika zaslona s %s" #. translators: #. * The device has been disabled #: ../plugins/media-keys/gvc/gvc-mixer-control.c:1830 msgid "Disabled" msgstr "Onemogućeno" #. translators: #. * The number of sound outputs on a particular device #: ../plugins/media-keys/gvc/gvc-mixer-control.c:1837 #, c-format msgid "%u Output" msgid_plural "%u Outputs" msgstr[0] "%u Izlaz" msgstr[1] "%u Izlaza" msgstr[2] "%u Izlaza" #. translators: #. * The number of sound inputs on a particular device #: ../plugins/media-keys/gvc/gvc-mixer-control.c:1847 #, c-format msgid "%u Input" msgid_plural "%u Inputs" msgstr[0] "%u Ulaz" msgstr[1] "%u Ulaza" msgstr[2] "%u Ulaza" #: ../plugins/media-keys/gvc/gvc-mixer-control.c:2371 msgid "System Sounds" msgstr "Zvukovi sustava" #. Priority=100 #: ../plugins/media-keys/media-keys.gnome-settings-plugin.in.h:2 msgid "Media keys" msgstr "Medijske tipke" #: ../plugins/media-keys/media-keys.gnome-settings-plugin.in.h:3 msgid "Media keys plugin" msgstr "Priključak medijske tipka" #: ../plugins/media-keys/shortcuts-list.h:45 msgid "Touchpad toggle" msgstr "Aktivacija touchpada" #: ../plugins/media-keys/shortcuts-list.h:46 msgid "Touchpad On" msgstr "Touchpad uključen" #: ../plugins/media-keys/shortcuts-list.h:47 msgid "Touchpad Off" msgstr "Touchpad isključen" #: ../plugins/media-keys/shortcuts-list.h:51 #: ../plugins/media-keys/shortcuts-list.h:52 msgid "Microphone Mute" msgstr "Utišaj mikrofon" #: ../plugins/media-keys/shortcuts-list.h:53 msgid "Quiet Volume Mute" msgstr "Postepeno utišavanje glasnoće zvuka" #: ../plugins/media-keys/shortcuts-list.h:54 msgid "Quiet Volume Down" msgstr "Postepeno utišavanje glasnoće zvuka" #: ../plugins/media-keys/shortcuts-list.h:55 msgid "Quiet Volume Up" msgstr "Postepeno pojačavanje glasnoće zvuka" #: ../plugins/media-keys/shortcuts-list.h:65 msgid "Lock Screen" msgstr "Zaključaj zaslon" #: ../plugins/media-keys/shortcuts-list.h:81 msgid "Rewind" msgstr "Premotaj unatrag" #: ../plugins/media-keys/shortcuts-list.h:82 msgid "Forward" msgstr "Premotaj unaprijed" #: ../plugins/media-keys/shortcuts-list.h:83 msgid "Repeat" msgstr "Ponovi" #: ../plugins/media-keys/shortcuts-list.h:84 msgid "Random Play" msgstr "Naizmjenična reprodukcija" #. Key code of the XF86Display key (Fn-F7 on Thinkpads, Fn-F4 on HP machines, etc.) #: ../plugins/media-keys/shortcuts-list.h:85 #: ../plugins/media-keys/shortcuts-list.h:87 msgid "Video Out" msgstr "Video izlaz" #. Key code of the XF86RotateWindows key (present on some tablets) #: ../plugins/media-keys/shortcuts-list.h:89 msgid "Rotate Screen" msgstr "Zakreni zaslon" #: ../plugins/media-keys/shortcuts-list.h:90 msgid "Orientation Lock" msgstr "Zaključavanje orjentacije" #: ../plugins/media-keys/shortcuts-list.h:99 msgid "Power Off" msgstr "Isključivanje" #. the kernel / Xorg names really are like this... #. translators: "Sleep" means putting the machine to sleep, either through hibernate or suspend #: ../plugins/media-keys/shortcuts-list.h:102 msgid "Sleep" msgstr "Spavanje" #: ../plugins/media-keys/shortcuts-list.h:103 msgid "Suspend" msgstr "Suspenzija" #: ../plugins/media-keys/shortcuts-list.h:104 msgid "Hibernate" msgstr "Hibernacija" #: ../plugins/media-keys/shortcuts-list.h:105 msgid "Brightness Up" msgstr "Pojačaj osvjetljenje" #: ../plugins/media-keys/shortcuts-list.h:106 msgid "Brightness Down" msgstr "Smanji osvjetljenje" #: ../plugins/media-keys/shortcuts-list.h:107 msgid "Keyboard Brightness Up" msgstr "Jače osvjetljenje tipkovnice" #: ../plugins/media-keys/shortcuts-list.h:108 msgid "Keyboard Brightness Down" msgstr "Slabije osvjetljenje tipkovnice" #: ../plugins/media-keys/shortcuts-list.h:109 msgid "Keyboard Brightness Toggle" msgstr "Aktivacija osvjetljenja tipkovnice" #: ../plugins/media-keys/shortcuts-list.h:110 msgid "Battery Status" msgstr "Stanje baterije" #: ../plugins/mouse/mouse.gnome-settings-plugin.in.h:1 msgid "Mouse" msgstr "Miš" #: ../plugins/mouse/mouse.gnome-settings-plugin.in.h:2 msgid "Mouse plugin" msgstr "Priključak miša" #. Priority=100 #: ../plugins/orientation/orientation.gnome-settings-plugin.in.h:2 msgid "Orientation" msgstr "Orijentacija" #: ../plugins/orientation/orientation.gnome-settings-plugin.in.h:3 msgid "Orientation plugin" msgstr "Priključak usmjerenja" #: ../plugins/power/gpm-common.c:81 msgid "Unknown time" msgstr "Nepoznato vrijeme" #: ../plugins/power/gpm-common.c:86 #, c-format msgid "%i minute" msgid_plural "%i minutes" msgstr[0] "%i minuta" msgstr[1] "%i minute" msgstr[2] "%i minuta" #: ../plugins/power/gpm-common.c:96 #, c-format msgid "%i hour" msgid_plural "%i hours" msgstr[0] "%i sat" msgstr[1] "%i sata" msgstr[2] "%i sati" #. TRANSLATOR: "%i %s %i %s" are "%i hours %i minutes" #. * Swap order with "%2$s %2$i %1$s %1$i if needed #: ../plugins/power/gpm-common.c:102 #, c-format msgid "%i %s %i %s" msgstr "%i %s %i %s" #: ../plugins/power/gpm-common.c:103 msgid "hour" msgid_plural "hours" msgstr[0] "sat" msgstr[1] "sata" msgstr[2] "sati" #: ../plugins/power/gpm-common.c:104 msgid "minute" msgid_plural "minutes" msgstr[0] "minuta" msgstr[1] "minute" msgstr[2] "minuta" #. TRANSLATORS: this is the sound description #: ../plugins/power/gpm-common.c:909 ../plugins/power/gsd-power-manager.c:687 #: ../plugins/power/gsd-power-manager.c:787 msgid "Battery is critically low" msgstr "Energija baterije je kritično slaba" #. TRANSLATORS: UPS is now discharging #: ../plugins/power/gsd-power-manager.c:347 msgid "UPS Discharging" msgstr "UPS pražnjenje" #. TRANSLATORS: tell the user how much time they have got #: ../plugins/power/gsd-power-manager.c:352 #, c-format msgid "%s of UPS backup power remaining" msgstr "Preostalo je %s rezerve energije neprekidnog napajanja (UPS)" #: ../plugins/power/gsd-power-manager.c:355 msgid "Unknown amount of UPS backup power remaining" msgstr "Preostala nepoznata razina pričuvne energije UPS-a." #. TRANSLATORS: this is the notification application name #: ../plugins/power/gsd-power-manager.c:371 #: ../plugins/power/gsd-power-manager.c:519 #: ../plugins/power/gsd-power-manager.c:670 #: ../plugins/power/gsd-power-manager.c:778 #: ../plugins/power/gsd-power-manager.c:2090 #: ../plugins/power/power.gnome-settings-plugin.in.h:1 msgid "Power" msgstr "Energija" #. TRANSLATORS: laptop battery low, and we only have one battery #: ../plugins/power/gsd-power-manager.c:434 msgid "Battery low" msgstr "Energija baterije slaba" #. TRANSLATORS: laptop battery low, and we have more than one kind of battery #: ../plugins/power/gsd-power-manager.c:437 msgid "Laptop battery low" msgstr "Baterija prijenosnika slaba" #. TRANSLATORS: tell the user how much time they have got #: ../plugins/power/gsd-power-manager.c:444 #, c-format msgid "Approximately %s remaining (%.0f%%)" msgstr "Približno %s preostalo (%.0f%%)" #. TRANSLATORS: UPS is starting to get a little low #: ../plugins/power/gsd-power-manager.c:449 msgid "UPS low" msgstr "Energija UPS-a niska" #. TRANSLATORS: tell the user how much time they have got #: ../plugins/power/gsd-power-manager.c:455 #, c-format msgid "Approximately %s of remaining UPS backup power (%.0f%%)" msgstr "Približno je %s preostalo neprekidnog napajanja (UPS) (%.0f%%)" #. TRANSLATORS: mouse is getting a little low #. TRANSLATORS: the mouse battery is very low #: ../plugins/power/gsd-power-manager.c:460 #: ../plugins/power/gsd-power-manager.c:597 msgid "Mouse battery low" msgstr "Baterija miša slaba" #. TRANSLATORS: tell user more details #: ../plugins/power/gsd-power-manager.c:463 #, c-format msgid "Wireless mouse is low in power (%.0f%%)" msgstr "Energija baterije bežičnog miša je slaba (%.0f%%)" #. TRANSLATORS: keyboard is getting a little low #. TRANSLATORS: the keyboard battery is very low #: ../plugins/power/gsd-power-manager.c:467 #: ../plugins/power/gsd-power-manager.c:605 msgid "Keyboard battery low" msgstr "Baterija tipkovnice slaba" #. TRANSLATORS: tell user more details #: ../plugins/power/gsd-power-manager.c:470 #, c-format msgid "Wireless keyboard is low in power (%.0f%%)" msgstr "Energija baterije bežične tipkovnice je slaba (%.0f%%)" #. TRANSLATORS: PDA is getting a little low #. TRANSLATORS: the PDA battery is very low #: ../plugins/power/gsd-power-manager.c:474 #: ../plugins/power/gsd-power-manager.c:614 msgid "PDA battery low" msgstr "Baterija dlanovnika slaba" #. TRANSLATORS: tell user more details #: ../plugins/power/gsd-power-manager.c:477 #, c-format msgid "PDA is low in power (%.0f%%)" msgstr "Energija baterije dlanovnika je slaba (%.0f%%)" #. TRANSLATORS: cell phone (mobile) is getting a little low #. TRANSLATORS: the cell battery is very low #: ../plugins/power/gsd-power-manager.c:481 #: ../plugins/power/gsd-power-manager.c:624 #: ../plugins/power/gsd-power-manager.c:633 msgid "Cell phone battery low" msgstr "Baterija mobitela slaba" #. TRANSLATORS: tell user more details #: ../plugins/power/gsd-power-manager.c:484 #, c-format msgid "Cell phone is low in power (%.0f%%)" msgstr "Energija baterije mobitela je slaba (%.0f%%)" #. TRANSLATORS: media player, e.g. mp3 is getting a little low #: ../plugins/power/gsd-power-manager.c:488 msgid "Media player battery low" msgstr "Baterija medijskog reproduktora slaba" #. TRANSLATORS: tell user more details #: ../plugins/power/gsd-power-manager.c:491 #, c-format msgid "Media player is low in power (%.0f%%)" msgstr "Energija baterije medijskog reproduktora je slaba (%.0f%%)" #. TRANSLATORS: graphics tablet, e.g. wacom is getting a little low #. TRANSLATORS: the cell battery is very low #: ../plugins/power/gsd-power-manager.c:495 #: ../plugins/power/gsd-power-manager.c:642 msgid "Tablet battery low" msgstr "Baterija tableta slaba" #. TRANSLATORS: tell user more details #: ../plugins/power/gsd-power-manager.c:498 #, c-format msgid "Tablet is low in power (%.0f%%)" msgstr "Energija baterije tableta je slaba (%.0f%%)" #. TRANSLATORS: computer, e.g. ipad is getting a little low #. TRANSLATORS: the cell battery is very low #: ../plugins/power/gsd-power-manager.c:502 #: ../plugins/power/gsd-power-manager.c:651 msgid "Attached computer battery low" msgstr "Energija baterije priključenog računala je slaba" #. TRANSLATORS: tell user more details #: ../plugins/power/gsd-power-manager.c:505 #, c-format msgid "Attached computer is low in power (%.0f%%)" msgstr "Energija baterije priključenog računala je slaba (%.0f%%)" #. TRANSLATORS: this is the sound description #: ../plugins/power/gsd-power-manager.c:529 msgid "Battery is low" msgstr "Energija baterije je slaba" #. TRANSLATORS: laptop battery critically low, and only have one kind of battery #: ../plugins/power/gsd-power-manager.c:561 msgid "Battery critically low" msgstr "Energija baterije kritično slaba" #. TRANSLATORS: laptop battery critically low, and we have more than one type of battery #. TRANSLATORS: laptop battery is really, really, low #: ../plugins/power/gsd-power-manager.c:564 #: ../plugins/power/gsd-power-manager.c:714 msgid "Laptop battery critically low" msgstr "Baterija prijenosnika kritično slaba" #. TRANSLATORS: give the user a ultimatum #: ../plugins/power/gsd-power-manager.c:573 #, c-format msgid "Computer will hibernate very soon unless it is plugged in." msgstr "Računalo će se uskoro hibernirati ako se ne priključi na napajanje." #. TRANSLATORS: give the user a ultimatum #: ../plugins/power/gsd-power-manager.c:577 #, c-format msgid "Computer will shutdown very soon unless it is plugged in." msgstr "Računalo će se uskoro isključiti ako se ne priključi na napajanje." #. TRANSLATORS: the UPS is very low #. TRANSLATORS: UPS is really, really, low #: ../plugins/power/gsd-power-manager.c:585 #: ../plugins/power/gsd-power-manager.c:739 msgid "UPS critically low" msgstr "Energija UPS-a je kritično niska" #. TRANSLATORS: give the user a ultimatum #: ../plugins/power/gsd-power-manager.c:591 #, c-format msgid "" "Approximately %s of remaining UPS power (%.0f%%). Restore AC power to your " "computer to avoid losing data." msgstr "" "Približno je %s preostalo neprekidnog napajanja (UPS) (%.0f%%). Priključite " "AC napajanje na vaše računalo kako bi izbjegli gubitak podataka." #. TRANSLATORS: the device is just going to stop working #: ../plugins/power/gsd-power-manager.c:600 #, c-format msgid "" "Wireless mouse is very low in power (%.0f%%). This device will soon stop " "functioning if not charged." msgstr "" "Energija baterije bežičnog miša je vrlo slaba (%.0f%%). Ovaj će uređaj " "uskoro prestati raditi ako ga ne napunite." #. TRANSLATORS: the device is just going to stop working #: ../plugins/power/gsd-power-manager.c:608 #, c-format msgid "" "Wireless keyboard is very low in power (%.0f%%). This device will soon stop " "functioning if not charged." msgstr "" "Energija bežične tipkovnice je vrlo slaba (%.0f%%). Ovaj će uređaj uskoro " "prestati raditi ako ga ne napunite." #. TRANSLATORS: the device is just going to stop working #: ../plugins/power/gsd-power-manager.c:617 #, c-format msgid "" "PDA is very low in power (%.0f%%). This device will soon stop functioning if " "not charged." msgstr "" "Energija baterije dlanovnika je vrlo slaba (%.0f%%). Ovaj će uređaj uskoro " "prestati raditi ako ga ne napunite." #. TRANSLATORS: the device is just going to stop working #: ../plugins/power/gsd-power-manager.c:627 #, c-format msgid "" "Cell phone is very low in power (%.0f%%). This device will soon stop " "functioning if not charged." msgstr "" "Energija baterije mobitela je vrlo slaba (%.0f%%). Ovaj će uređaj uskoro " "prestati raditi ako ga ne napunite." #. TRANSLATORS: the device is just going to stop working #: ../plugins/power/gsd-power-manager.c:636 #, c-format msgid "" "Media player is very low in power (%.0f%%). This device will soon stop " "functioning if not charged." msgstr "" "Energija baterije medijskog reproduktora je vrlo slaba (%.0f%%). Ovaj će " "uređaj uskoro prestati raditi ako ga ne napunite." #. TRANSLATORS: the device is just going to stop working #: ../plugins/power/gsd-power-manager.c:645 #, c-format msgid "" "Tablet is very low in power (%.0f%%). This device will soon stop functioning " "if not charged." msgstr "" "Energija baterije tableta je vrlo slaba (%.0f%%). Ovaj će uređaj uskoro " "prestati raditi ako ga ne napunite." #. TRANSLATORS: the device is just going to stop working #: ../plugins/power/gsd-power-manager.c:654 #, c-format msgid "" "Attached computer is very low in power (%.0f%%). The device will soon " "shutdown if not charged." msgstr "" "Energija baterije priključenog računala je vrlo slaba (%.0f%%). Ovaj će se " "uređaj uskoro ugasiti ako ga ne napunite." #. TRANSLATORS: computer will hibernate #: ../plugins/power/gsd-power-manager.c:722 msgid "" "The battery is below the critical level and this computer is about to " "hibernate." msgstr "" "Energija baterija je ispod kritične razine i računalo će biti hibernirano." #. TRANSLATORS: computer will just shutdown #: ../plugins/power/gsd-power-manager.c:727 msgid "" "The battery is below the critical level and this computer is about to " "shutdown." msgstr "" "Energija baterije je ispod kritične razine i računalo će biti isključeno." #. TRANSLATORS: computer will hibernate #: ../plugins/power/gsd-power-manager.c:747 msgid "" "UPS is below the critical level and this computer is about to hibernate." msgstr "" "Neprekidno napajanje (UPS) ima kritično malo energije te će se ovo računalo " "hibernirati." #. TRANSLATORS: computer will just shutdown #: ../plugins/power/gsd-power-manager.c:752 msgid "" "UPS is below the critical level and this computer is about to shutdown." msgstr "" "Neprekidno napajanje (UPS) ima kritično malo energije te će se ovo računalo " "isključiti." #. TRANSLATORS: this is the sound description #: ../plugins/power/gsd-power-manager.c:1280 msgid "Lid has been opened" msgstr "Poklopac je otvoren" #. TRANSLATORS: this is the sound description #: ../plugins/power/gsd-power-manager.c:1318 msgid "Lid has been closed" msgstr "Poklopac je zatvoren" #. TRANSLATORS: this is the sound description #: ../plugins/power/gsd-power-manager.c:1881 msgid "On battery power" msgstr "Na bateriji" #. TRANSLATORS: this is the sound description #: ../plugins/power/gsd-power-manager.c:1886 msgid "On AC power" msgstr "Na napajanju" #: ../plugins/power/gsd-power-manager.c:2068 msgid "Automatic logout" msgstr "Automatska odjava" #: ../plugins/power/gsd-power-manager.c:2068 msgid "You will soon log out because of inactivity." msgstr "Uskoro ćete biti odjavljeni zbog neaktivnosti." #: ../plugins/power/gsd-power-manager.c:2073 msgid "Automatic suspend" msgstr "Automatska suspenzija" #: ../plugins/power/gsd-power-manager.c:2073 #: ../plugins/power/gsd-power-manager.c:2078 msgid "Computer will suspend very soon because of inactivity." msgstr "Računalo će se uskoro suspendirati zbog neaktivnosti." #: ../plugins/power/gsd-power-manager.c:2078 msgid "Automatic hibernation" msgstr "Automatska hibernacija" #. SECURITY: #. - A normal active user on the local machine does not need permission #. to change the backlight brightness. #. #: ../plugins/power/org.gnome.settings-daemon.plugins.power.policy.in.in.h:5 msgid "Modify the laptop brightness" msgstr "Promijeni svjetlinu prijenosnika" #: ../plugins/power/org.gnome.settings-daemon.plugins.power.policy.in.in.h:6 msgid "Authentication is required to modify the laptop brightness" msgstr "Potrebna je ovjera za promjenjanje svjetline prijenosnika" #: ../plugins/power/power.gnome-settings-plugin.in.h:2 msgid "Power plugin" msgstr "Priključak energije" #. Translators: We are configuring new printer #: ../plugins/print-notifications/gsd-printer.c:890 msgid "Configuring new printer" msgstr "Podešavanje novog pisača" #. Translators: Just wait #: ../plugins/print-notifications/gsd-printer.c:892 msgid "Please wait..." msgstr "Molim pričekajte..." #. Translators: We have no driver installed for this printer #: ../plugins/print-notifications/gsd-printer.c:919 msgid "Missing printer driver" msgstr "Nedostaje upravljački program pisača" #. Translators: We have no driver installed for the device #: ../plugins/print-notifications/gsd-printer.c:928 #, c-format msgid "No printer driver for %s." msgstr "Nema dostupnog upravljačkog programa za %s." #. Translators: We have no driver installed for this printer #: ../plugins/print-notifications/gsd-printer.c:933 msgid "No driver for this printer." msgstr "Nema dostupnog upravljačkog programa za ovaj pisač." #: ../plugins/print-notifications/gsd-printer.c:1031 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:274 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:716 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:806 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:849 msgid "Printers" msgstr "Pisači" #. Translators: The printer is low on toner (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:380 msgid "Toner low" msgstr "Tinta tonera pri kraju" #. Translators: The printer has no toner left (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:382 msgid "Toner empty" msgstr "Prazan toner" #. Translators: The printer is in the process of connecting to a shared network output device (same as in system-config-printer) #. N_("Not connected?"), #. Translators: One or more covers on the printer are open (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:386 msgid "Cover open" msgstr "Otvoren je poklopac" #. Translators: A filter or backend is not installed (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:388 msgid "Printer configuration error" msgstr "Greška u podešavanju pisača" #. Translators: One or more doors on the printer are open (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:390 msgid "Door open" msgstr "Vratašca su otvorena" #. Translators: "marker" is one color bin of the printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:392 msgid "Marker supply low" msgstr "Niska razina tinte" #. Translators: "marker" is one color bin of the printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:394 msgid "Out of a marker supply" msgstr "Ponestalo tinte" #. Translators: At least one input tray is low on media (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:396 msgid "Paper low" msgstr "Papir pri kraju" #. Translators: At least one input tray is empty (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:398 msgid "Out of paper" msgstr "Ponestalo papira" #. Translators: The printer is offline (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:400 msgid "Printer off-line" msgstr "Pisač je nedostupan" #. Translators: The printer has detected an error (same as in system-config-printer) #. Translators: This is a title of an error notification for a printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:402 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:792 msgid "Printer error" msgstr "Pogreška pisača" #. Translators: The printer is low on toner (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:406 #, c-format msgid "Printer '%s' is low on toner." msgstr "Pisaču '%s' ponestaje tinte u toneru." #. Translators: The printer has no toner left (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:408 #, c-format msgid "Printer '%s' has no toner left." msgstr "Pisač '%s' je ostao bez tinte u toneru." #. Translators: The printer is in the process of connecting to a shared network output device (same as in system-config-printer) #. N_("Printer '%s' may not be connected."), #. Translators: One or more covers on the printer are open (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:412 #, c-format msgid "The cover is open on printer '%s'." msgstr "Poklopac na pisaču '%s' je otvoren." #. Translators: A filter or backend is not installed (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:414 #, c-format msgid "There is a missing print filter for printer '%s'." msgstr "Nedostaje ispisni filtar za pisač \"%s\"." #. Translators: One or more doors on the printer are open (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:417 #, c-format msgid "The door is open on printer '%s'." msgstr "Vratašca na pisaču '%s' su otvorena." #. Translators: "marker" is one color bin of the printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:419 #, c-format msgid "Printer '%s' is low on a marker supply." msgstr "Niska razina tinte u pisaču \"%s\"." #. Translators: "marker" is one color bin of the printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:421 #, c-format msgid "Printer '%s' is out of a marker supply." msgstr "Nema više tinte u pisaču \"%s\"." #. Translators: At least one input tray is low on media (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:423 #, c-format msgid "Printer '%s' is low on paper." msgstr "Pisaču '%s' ponestaje papira." #. Translators: At least one input tray is empty (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:425 #, c-format msgid "Printer '%s' is out of paper." msgstr "Pisač '%s' ostao je bez papira." #. Translators: The printer is offline (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:427 #, c-format msgid "Printer '%s' is currently off-line." msgstr "Pisač \"%s\" je trenutno nedostupan." #. Translators: The printer has detected an error (same as in system-config-printer) #: ../plugins/print-notifications/gsd-print-notifications-manager.c:429 #, c-format msgid "There is a problem on printer '%s'." msgstr "Postoji problem s pisačem \"%s\"." #. Translators: New printer has been added #: ../plugins/print-notifications/gsd-print-notifications-manager.c:477 msgid "Printer added" msgstr "Pisač je dodan" #. Translators: A print job has been stopped #: ../plugins/print-notifications/gsd-print-notifications-manager.c:494 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:532 msgctxt "print job state" msgid "Printing stopped" msgstr "Ispisivanje zaustavljeno" #. Translators: "print-job xy" on a printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:496 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:502 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:508 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:514 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:526 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:534 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:542 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:550 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:558 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:571 #, c-format msgctxt "print job" msgid "\"%s\" on %s" msgstr "\"%s\" na %s" #. Translators: A print job has been canceled #: ../plugins/print-notifications/gsd-print-notifications-manager.c:500 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:540 msgctxt "print job state" msgid "Printing canceled" msgstr "Ispisivanje otkazano" #. Translators: A print job has been aborted #: ../plugins/print-notifications/gsd-print-notifications-manager.c:506 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:548 msgctxt "print job state" msgid "Printing aborted" msgstr "Ispisivanje prekinuto" #. Translators: A print job has been completed #: ../plugins/print-notifications/gsd-print-notifications-manager.c:512 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:556 msgctxt "print job state" msgid "Printing completed" msgstr "Ispisivanje završeno" #. Translators: A job is printing #: ../plugins/print-notifications/gsd-print-notifications-manager.c:524 #: ../plugins/print-notifications/gsd-print-notifications-manager.c:569 msgctxt "print job state" msgid "Printing" msgstr "Ispisivanje" #. Translators: This is a title of a report notification for a printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:786 msgid "Printer report" msgstr "Izvještaj pisača" #. Translators: This is a title of a warning notification for a printer #: ../plugins/print-notifications/gsd-print-notifications-manager.c:789 msgid "Printer warning" msgstr "Upozorenje pisača" #. Translators: "Printer 'MyPrinterName': 'Description of the report/warning/error from a PPD file'." #: ../plugins/print-notifications/gsd-print-notifications-manager.c:799 #, c-format msgid "Printer '%s': '%s'." msgstr "Pisač '%s': '%s'." #. Priority=100 #: ../plugins/print-notifications/print-notifications.gnome-settings-plugin.in.h:2 msgid "Print-notifications" msgstr "Obavijesti o ispisu" #: ../plugins/print-notifications/print-notifications.gnome-settings-plugin.in.h:3 msgid "Print-notifications plugin" msgstr "Priključak obavijesti o ispisu" #. Priority=100 #: ../plugins/rfkill/rfkill.gnome-settings-plugin.in.h:2 msgid "Rfkill" msgstr "Rfkill" #: ../plugins/rfkill/rfkill.gnome-settings-plugin.in.h:3 msgid "Rfkill plugin" msgstr "Rfkill priključak" #: ../plugins/screensaver-proxy/screensaver-proxy.gnome-settings-plugin.in.h:1 msgid "Screensaver Proxy" msgstr "Proxy čuvara zaslona" #: ../plugins/screensaver-proxy/screensaver-proxy.gnome-settings-plugin.in.h:2 msgid "Proxy FreeDesktop screensaver inhibition to gnome-session" msgstr "Proxy FreeDesktop čuvara zaslona smeta gnome-session" #: ../plugins/smartcard/gsd-smartcard-service.c:222 msgid "User was not logged in with smartcard." msgstr "Korisnik nije prijavljen pametnom karticom." #: ../plugins/smartcard/smartcard.gnome-settings-plugin.in.h:1 msgid "Smartcard" msgstr "Pametna kartica" #: ../plugins/smartcard/smartcard.gnome-settings-plugin.in.h:2 msgid "Smartcard plugin" msgstr "Priključak pametne kartice" #: ../plugins/sound/sound.gnome-settings-plugin.in.h:1 msgid "Sound" msgstr "Zvuk" #: ../plugins/sound/sound.gnome-settings-plugin.in.h:2 msgid "Sound Sample Cache plugin" msgstr "Priključak predmemorije uzorka zvuka" #. TRANSLATORS: we need to restart so the new hardware can re-request the firmware #: ../plugins/updates/gsd-updates-firmware.c:250 msgid "" "You will need to restart this computer before the hardware will work " "correctly." msgstr "" "Kako bi hardver ispravno radio, trebate ponovo pokrenuti ovo računalo." #. TRANSLATORS: title of libnotify bubble #: ../plugins/updates/gsd-updates-firmware.c:253 #: ../plugins/updates/gsd-updates-firmware.c:281 #: ../plugins/updates/gsd-updates-firmware.c:309 msgid "Additional software was installed" msgstr "Dodatni softver je instaliran" #: ../plugins/updates/gsd-updates-firmware.c:255 #: ../plugins/updates/gsd-updates-firmware.c:283 #: ../plugins/updates/gsd-updates-firmware.c:311 #: ../plugins/updates/gsd-updates-firmware.c:603 #: ../plugins/updates/gsd-updates-manager.c:360 #: ../plugins/updates/gsd-updates-manager.c:496 #: ../plugins/updates/gsd-updates-manager.c:565 #: ../plugins/updates/gsd-updates-manager.c:626 #: ../plugins/updates/gsd-updates-manager.c:1261 msgid "Software Updates" msgstr "Softverske nadopune" #. TRANSLATORS: we need to remove an replug so the new hardware can re-request the firmware #: ../plugins/updates/gsd-updates-firmware.c:278 msgid "" "You will need to remove and then reinsert the hardware before it will work " "correctly." msgstr "" "Kako bi hardver ispravno radio, morati ćete ga ukloniti i ponovo priključiti." #. TRANSLATORS: we need to remove an replug so the new hardware can re-request the firmware #: ../plugins/updates/gsd-updates-firmware.c:306 msgid "Your hardware has been set up and is now ready to use." msgstr "Vaš hardver je podešen i spreman je za korištenje." #. TRANSLATORS: we need another package to keep udev quiet #: ../plugins/updates/gsd-updates-firmware.c:587 msgid "" "Additional firmware is required to make hardware in this computer function " "correctly." msgstr "" "Kako bi hardver u ovom računalo ispravno radio, potreban je dodatan firmver." #. TRANSLATORS: title of libnotify bubble #: ../plugins/updates/gsd-updates-firmware.c:601 msgid "Additional firmware required" msgstr "Potreban je dodatan firmver" #. TRANSLATORS: button label #: ../plugins/updates/gsd-updates-firmware.c:608 msgid "Install firmware" msgstr "Instaliraj firmver" #. TRANSLATORS: we should ignore this device and not ask anymore #: ../plugins/updates/gsd-updates-firmware.c:611 msgid "Ignore devices" msgstr "Zanemari uređaje" #. TRANSLATORS: this is when the offline update failed #: ../plugins/updates/gsd-updates-manager.c:121 msgid "Failed To Update" msgstr "Neuspjela nadopuna" #. TRANSLATORS: the transaction could not be completed #. * as a previous transaction was unfinished #: ../plugins/updates/gsd-updates-manager.c:127 msgid "A previous update was unfinished." msgstr "Prijašnja nadopuna nije završena." #. TRANSLATORS: the package manager needed to download #. * something with no network available #: ../plugins/updates/gsd-updates-manager.c:137 msgid "Network access was required but not available." msgstr "Mrežni pristup je potreban ali nije dostupan." #. TRANSLATORS: if the package is not signed correctly #. * #: ../plugins/updates/gsd-updates-manager.c:146 msgid "An update was not signed in the correct way." msgstr "Nadopuna nije prijavljena ispravno." #. TRANSLATORS: the transaction failed in a way the user #. * probably cannot comprehend. Package management systems #. * really are teh suck. #: ../plugins/updates/gsd-updates-manager.c:156 msgid "The update could not be completed." msgstr "Nadopuna ne može biti ispravno završena." #. TRANSLATORS: the user aborted the update manually #: ../plugins/updates/gsd-updates-manager.c:161 msgid "The update was cancelled." msgstr "Nadopunjivanje je prekinuto." #. TRANSLATORS: the user must have updated manually after #. * the updates were prepared #: ../plugins/updates/gsd-updates-manager.c:167 msgid "An offline update was requested but no packages required updating." msgstr "" "Izvan mrežna nadopuna zatražena, ali nijedan paket ne zahtijeva " "nadopunjavanje." #. TRANSLATORS: we ran out of disk space #: ../plugins/updates/gsd-updates-manager.c:171 msgid "No space was left on the drive." msgstr "Nema slobodnog prostora na disku." #. TRANSLATORS: the update process failed in a general #. * way, usually this message will come from source distros #. * like gentoo #: ../plugins/updates/gsd-updates-manager.c:179 msgid "An update failed to install correctly." msgstr "Nadopuna se nije ispravno instalirala." #. TRANSLATORS: We didn't handle the error type #: ../plugins/updates/gsd-updates-manager.c:184 msgid "The offline update failed in an unexpected way." msgstr "Izvan mrežno nadopunjavanje je neočekivano neuspjelo." #. TRANSLATORS: these are geeky messages from the #. * package manager no mortal is supposed to understand, #. * but google might know what they mean #: ../plugins/updates/gsd-updates-manager.c:193 msgid "Detailed errors from the package manager follow:" msgstr "Opširne greške iz upravitelja paketa slijede:" #. TRANSLATORS: a distro update is available, e.g. Fedora 8 to Fedora 9 #: ../plugins/updates/gsd-updates-manager.c:355 msgid "Distribution upgrades available" msgstr "Dostupna je nadogradnja distribucije" #. TRANSLATORS: don't install updates now #: ../plugins/updates/gsd-updates-manager.c:365 #: ../plugins/updates/gsd-updates-manager.c:501 #: ../plugins/updates/gsd-updates-manager.c:570 msgid "Not Now" msgstr "Ne sada" #. TRANSLATORS: provides more information about the upgrade #: ../plugins/updates/gsd-updates-manager.c:370 msgid "More information" msgstr "Više informacija" #. TRANSLATORS: title in the libnotify popup #: ../plugins/updates/gsd-updates-manager.c:478 #: ../plugins/updates/gsd-updates-manager.c:547 msgid "Update" msgid_plural "Updates" msgstr[0] "Nadopuna" msgstr[1] "Nadopune" msgstr[2] "Nadopune" #. TRANSLATORS: message when there are security updates #: ../plugins/updates/gsd-updates-manager.c:481 msgid "An important software update is available" msgid_plural "Important software updates are available" msgstr[0] "Dostupna je važna softverska dopuna" msgstr[1] "Dostupne su važne softverske dopune" msgstr[2] "Dostupne su važne softverske dopune" #. TRANSLATORS: button: open the update viewer to install updates #: ../plugins/updates/gsd-updates-manager.c:506 #: ../plugins/updates/gsd-updates-manager.c:575 msgid "Install updates" msgstr "Instaliraj nadopune" #. TRANSLATORS: message when there are non-security updates #: ../plugins/updates/gsd-updates-manager.c:550 msgid "A software update is available." msgid_plural "Software updates are available." msgstr[0] "Dostupna je sotverska dopuna." msgstr[1] "Dostupne su softverske dopune." msgstr[2] "Dostupne su softverske dopune." #. TRANSLATORS: the updates mechanism #: ../plugins/updates/gsd-updates-manager.c:613 #: ../plugins/updates/updates.gnome-settings-plugin.in.h:1 msgid "Updates" msgstr "Nadopune" #. TRANSLATORS: we failed to get the updates multiple times, #. * and now we need to inform the user that something might be wrong #: ../plugins/updates/gsd-updates-manager.c:617 msgid "Unable to access software updates" msgstr "Nemoguće pristupiti softverskim nadopunama" #. TRANSLATORS: try again, this time launching the update viewer #: ../plugins/updates/gsd-updates-manager.c:620 msgid "Try again" msgstr "Pokušaj ponovno" #. TRANSLATORS: the reason why we've inhibited it #: ../plugins/updates/gsd-updates-manager.c:994 msgid "A transaction that cannot be interrupted is running" msgstr "Pokrenuta je transakcija koja se ne može prekinuti" #. TRANSLATORS: title in the libnotify popup #: ../plugins/updates/gsd-updates-manager.c:1214 msgid "Software Update Installed" msgid_plural "Software Updates Installed" msgstr[0] "Softverska nadopuna je instalirana" msgstr[1] "Softverske nadopune su instalirane" msgstr[2] "Softverske nadopune su instalirane" #. TRANSLATORS: message when we've done offline updates #: ../plugins/updates/gsd-updates-manager.c:1219 msgid "An important OS update has been installed." msgid_plural "Important OS updates have been installed." msgstr[0] "Važna nadopuna operativnog sustava je instalirana." msgstr[1] "Važne nadopune operativnog sustava su instalirane." msgstr[2] "Važne nadopune operativnog sustava su instalirane." #. TRANSLATORS: title in the libnotify popup #: ../plugins/updates/gsd-updates-manager.c:1242 msgid "Software Updates Failed" msgstr "Neuspjelo nadopunjavanje softvera" #. TRANSLATORS: message when we've not done offline updates #: ../plugins/updates/gsd-updates-manager.c:1245 msgid "An important OS update failed to be installed." msgstr "Važna nadopuna operativnog sustava je neuspješno instalirana." #. TRANSLATORS: button: review the offline update changes #: ../plugins/updates/gsd-updates-manager.c:1267 msgid "Show details" msgstr "Prikaži pojedinosti" #. TRANSLATORS: button: clear notification #: ../plugins/updates/gsd-updates-manager.c:1271 msgid "OK" msgstr "U redu" #: ../plugins/updates/updates.gnome-settings-plugin.in.h:2 msgid "Updates plugin" msgstr "Priključak nadopuna" #: ../plugins/wacom/gsd-wacom-button-editor.c:51 msgctxt "Wacom action-type" msgid "None" msgstr "Nijedna" #: ../plugins/wacom/gsd-wacom-button-editor.c:52 msgctxt "Wacom action-type" msgid "Send Keystroke" msgstr "Pošalji pritisak tipke" #: ../plugins/wacom/gsd-wacom-button-editor.c:53 msgctxt "Wacom action-type" msgid "Switch Monitor" msgstr "Prebaci zaslon" #: ../plugins/wacom/gsd-wacom-button-editor.c:54 msgctxt "Wacom action-type" msgid "Show On-Screen Help" msgstr "Prikaži zaslonsku pomoć" #: ../plugins/wacom/gsd-wacom-button-editor.c:154 #: ../plugins/wacom/gsd-wacom-osd-window.c:1096 msgctxt "Action type" msgid "Show On-Screen Help" msgstr "Prikaži zaslonsku pomoć" #: ../plugins/wacom/gsd-wacom-button-editor.c:157 #: ../plugins/wacom/gsd-wacom-osd-window.c:1099 msgctxt "Action type" msgid "Switch Monitor" msgstr "Prebaci monitor" #: ../plugins/wacom/gsd-wacom-button-editor.c:201 msgctxt "keyboard shortcut" msgid "None" msgstr "Nijedan" #: ../plugins/wacom/gsd-wacom-button-editor.c:487 msgid "Done" msgstr "Završeno" #. If no mode is available, we use "left-ring-mode-1" for backward compat #: ../plugins/wacom/gsd-wacom-device.c:1028 msgid "Left Ring" msgstr "Lijevi prsten" #: ../plugins/wacom/gsd-wacom-device.c:1039 #, c-format msgid "Left Ring Mode #%d" msgstr "Način lijevog prstena #%d" #. If no mode is available, we use "right-ring-mode-1" for backward compat #: ../plugins/wacom/gsd-wacom-device.c:1059 msgid "Right Ring" msgstr "Desni prsten" #: ../plugins/wacom/gsd-wacom-device.c:1070 #, c-format msgid "Right Ring Mode #%d" msgstr "Način desnog prstena #%d" #. If no mode is available, we use "left-strip-mode-1" for backward compat #: ../plugins/wacom/gsd-wacom-device.c:1112 msgid "Left Touchstrip" msgstr "Lijeva dodirna traka" #: ../plugins/wacom/gsd-wacom-device.c:1123 #, c-format msgid "Left Touchstrip Mode #%d" msgstr "Način lijeve dodirne trake #%d" #. If no mode is available, we use "right-strip-mode-1" for backward compat #: ../plugins/wacom/gsd-wacom-device.c:1143 msgid "Right Touchstrip" msgstr "Desna dodirna traka" #: ../plugins/wacom/gsd-wacom-device.c:1154 #, c-format msgid "Right Touchstrip Mode #%d" msgstr "Način desne dodirne trake #%d" #: ../plugins/wacom/gsd-wacom-device.c:1180 #, c-format msgid "Left Touchring Mode Switch" msgstr "Prebacivanje načina lijevog dodirnog prstena" #: ../plugins/wacom/gsd-wacom-device.c:1182 #, c-format msgid "Right Touchring Mode Switch" msgstr "Prebacivanje načina desnog dodirnog prstena" #: ../plugins/wacom/gsd-wacom-device.c:1185 #, c-format msgid "Left Touchstrip Mode Switch" msgstr "Prebacivanje načina lijeve dodirne trake" #: ../plugins/wacom/gsd-wacom-device.c:1187 #, c-format msgid "Right Touchstrip Mode Switch" msgstr "Prebacivanje načina desne dodirne trake" #: ../plugins/wacom/gsd-wacom-device.c:1192 #, c-format msgid "Mode Switch #%d" msgstr "Prebacivanje načina #%d" #: ../plugins/wacom/gsd-wacom-device.c:1300 #, c-format msgid "Left Button #%d" msgstr "Lijeva tipka #%d" #: ../plugins/wacom/gsd-wacom-device.c:1303 #, c-format msgid "Right Button #%d" msgstr "Desna tipka #%d" #: ../plugins/wacom/gsd-wacom-device.c:1306 #, c-format msgid "Top Button #%d" msgstr "Gornja tipka #%d" #: ../plugins/wacom/gsd-wacom-device.c:1309 #, c-format msgid "Bottom Button #%d" msgstr "Donja tipka #%d" #: ../plugins/wacom/gsd-wacom-key-shortcut-button.c:263 msgid "New shortcut…" msgstr "Novi prečac..." #: ../plugins/wacom/gsd-wacom-manager.c:1031 #, c-format msgid "The \"%s\" tablet may not work as expected." msgstr "\"%s\" tablet možda neće raditi kao što je očekivano." #: ../plugins/wacom/gsd-wacom-manager.c:1032 msgid "Unknown Tablet Connected" msgstr "Nepoznat tablet povezan" #: ../plugins/wacom/gsd-wacom-manager.c:1036 msgid "Wacom Settings" msgstr "Wacom postavke" #: ../plugins/wacom/gsd-wacom-osd-window.c:1073 #: ../plugins/wacom/gsd-wacom-osd-window.c:1093 #: ../plugins/wacom/gsd-wacom-osd-window.c:1104 msgctxt "Action type" msgid "None" msgstr "Nijedna" #: ../plugins/wacom/gsd-wacom-osd-window.c:1078 #, c-format msgctxt "Action type" msgid "Send Keystroke %s" msgstr "Pošalji pritisak tipke %s" #: ../plugins/wacom/gsd-wacom-osd-window.c:1137 #, c-format msgid "Mode %d: %s" msgstr "Način %d: %s" #: ../plugins/wacom/gsd-wacom-osd-window.c:1347 msgid "(press any key to exit)" msgstr "(pritisnite bilo koju tipku za izlaz)" #: ../plugins/wacom/gsd-wacom-osd-window.c:1356 msgid "Push a button to configure" msgstr "Pritisnite tipku za podešavanje" #: ../plugins/wacom/gsd-wacom-osd-window.c:1356 msgid "(Esc to cancel)" msgstr "(Esc za prekid)" #: ../plugins/wacom/gsd-wacom-osd-window.c:1983 msgid "Edit" msgstr "Uredi" #. SECURITY: #. - A normal active user on the local machine does not need permission #. to change the LED setting for a Wacom tablet #. #: ../plugins/wacom/org.gnome.settings-daemon.plugins.wacom.policy.in.in.h:5 msgid "Modify the lit LED for a Wacom tablet" msgstr "Promijeni LED svjetlo na Wacom tabletu" #: ../plugins/wacom/org.gnome.settings-daemon.plugins.wacom.policy.in.in.h:6 msgid "Authentication is required to modify the lit LED for a Wacom tablet" msgstr "Potrebna je ovjera za mijenjanje LED svjetla na Wacom tabletu." #. SECURITY: #. - A normal active user on the local machine does not need permission #. to change the OLED images for a Wacom tablet #. #: ../plugins/wacom/org.gnome.settings-daemon.plugins.wacom.policy.in.in.h:11 msgid "Modify the OLED image for a Wacom tablet" msgstr "Prilagodi OLED sliku za Wacom tablet" #: ../plugins/wacom/org.gnome.settings-daemon.plugins.wacom.policy.in.in.h:12 msgid "" "Authentication is required to modify the OLED image for a Wacom tablet" msgstr "Potrebna je ovjera za prilagodbu OLED slike za Wacom tablet" #: ../plugins/wacom/wacom.gnome-settings-plugin.in.h:1 msgid "Wacom" msgstr "Wacom" #: ../plugins/wacom/wacom.gnome-settings-plugin.in.h:2 msgid "Wacom plugin" msgstr "Wacom priključak" #: ../plugins/xrandr/gsd-xrandr-manager.c:965 #, c-format msgid "Could not refresh the screen information: %s" msgstr "Neuspjelo osvježavanje zaslonskih informacija: %s" #: ../plugins/xrandr/xrandr.gnome-settings-plugin.in.h:1 msgid "XRandR" msgstr "XRandR" #: ../plugins/xrandr/xrandr.gnome-settings-plugin.in.h:2 msgid "Set up screen size and rotation settings" msgstr "Postavite veličinu zaslona i postavke okretanja" #: ../plugins/xsettings/xsettings.gnome-settings-plugin.in.h:1 msgid "X Settings" msgstr "X postavke" #: ../plugins/xsettings/xsettings.gnome-settings-plugin.in.h:2 msgid "Manage X Settings" msgstr "Upravljaj X postavkama" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/gnome-power-manager.po0000644000000000000000000005330412704126313022407 0ustar # Croatian translation for gnome-power-manager # Copyright (c) (c) 2006 Canonical Ltd, and Rosetta Contributors 2006 # This file is distributed under the same license as the gnome-power-manager package. # Translators: # msgid "" msgstr "" "Project-Id-Version: gnome-power-manager\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2015-12-03 22:29+0000\n" "PO-Revision-Date: 2015-10-16 21:53+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 06:34+0000\n" "X-Generator: Launchpad (build 17995)\n" "Language: hr\n" #: ../data/org.gnome.power-manager.gschema.xml.h:1 msgid "Whether we should show the history data points" msgstr "Je li potrebno prikazati točke povijesnih podataka" #: ../data/org.gnome.power-manager.gschema.xml.h:2 msgid "" "Whether we should show the history data points in the statistics window." msgstr "" "Je li potrebno prikazati točke povijesnih podataka u prozoru statistika." #: ../data/org.gnome.power-manager.gschema.xml.h:3 msgid "Whether we should smooth the history data" msgstr "Treba li izgladiti povijesne podatke" #: ../data/org.gnome.power-manager.gschema.xml.h:4 msgid "Whether we should smooth the history data in the graph." msgstr "Treba li izgladiti povijesne podatke u grafu." #: ../data/org.gnome.power-manager.gschema.xml.h:5 msgid "The default graph type to show for history" msgstr "Zadana vrsta grafa za prikaz povijesti" #: ../data/org.gnome.power-manager.gschema.xml.h:6 msgid "The default graph type to show in the history window." msgstr "Zadana vrsta grafa za prikaz u prozoru povijesti." #: ../data/org.gnome.power-manager.gschema.xml.h:7 msgid "The maximum time displayed for history" msgstr "Maksimalno prikazano vrijeme za povijest" #: ../data/org.gnome.power-manager.gschema.xml.h:8 msgid "" "The maximum duration of time displayed on the x-axis of the history graph." msgstr "Maksimalno trajanje vremena prikazanog na x osi na grafu povijesti." #: ../data/org.gnome.power-manager.gschema.xml.h:9 msgid "Whether we should show the stats data points" msgstr "Je li potrebno prikazati točke statističkih podataka" #: ../data/org.gnome.power-manager.gschema.xml.h:10 msgid "" "Whether we should show the stats data points in the statistics window." msgstr "" "Je li potrebno prikazati točke statističkih podataka u prozoru statistika." #: ../data/org.gnome.power-manager.gschema.xml.h:11 msgid "Whether we should smooth the stats data" msgstr "Treba li izgladiti statističke podatke" #: ../data/org.gnome.power-manager.gschema.xml.h:12 msgid "Whether we should smooth the stats data in the graph." msgstr "Treba li izgladiti statističke podatke u grafu." #: ../data/org.gnome.power-manager.gschema.xml.h:13 msgid "The default graph type to show for stats" msgstr "Zadana vrsta grafa za prikaz statistike" #: ../data/org.gnome.power-manager.gschema.xml.h:14 msgid "The default graph type to show in the stats window." msgstr "Zadana vrsta grafa za prikaz u prozoru statistike." #: ../data/org.gnome.power-manager.gschema.xml.h:15 msgid "The index of the page number to show by default" msgstr "Zadani indeks broja stranice koja će se prikazati" #: ../data/org.gnome.power-manager.gschema.xml.h:16 msgid "" "The index of the page number to show by default which is used to return " "focus to the correct page." msgstr "" "Indeks broja zadane stranice koja će se prikazati za vraćanje fokusa na " "ispravnu stranicu." #: ../data/org.gnome.power-manager.gschema.xml.h:17 msgid "The ID of the last device selected" msgstr "Označen ID zadnjeg uređaja" #: ../data/org.gnome.power-manager.gschema.xml.h:18 msgid "" "The identifier of the last device which is used to return focus to the " "correct device." msgstr "" "Identifikator zadnjeg uređaja koji se koristi za vraćanje fokusa na ispravan " "uređaj." #: ../data/appdata/gnome-power-statistics.appdata.xml.in.h:1 msgid "GNOME Power Statistics" msgstr "GNOME energetska statistika" #: ../data/appdata/gnome-power-statistics.appdata.xml.in.h:2 #: ../data/gnome-power-statistics.desktop.in.in.h:2 msgid "Observe power management" msgstr "Promatraj upravljanje energijom" #: ../data/appdata/gnome-power-statistics.appdata.xml.in.h:3 msgid "" "Power Statistics can show historical and current battery information and " "programs waking up that use power." msgstr "" "Statistika energije može prikazati povijesne i trenutne informacije i " "programe koji pokrenuti i troše energiju." #: ../data/appdata/gnome-power-statistics.appdata.xml.in.h:4 msgid "" "You probably only need to install this application if you are having " "problems with your laptop battery, or are trying to work out what programs " "are using significant amounts of power." msgstr "" "Najvjerojatnije vam je potrebno instalirati ovu aplikaciju ako imate " "problema s baterijom vašeg prijenosnog računala, ili ako trebate otkriti " "koji program troši previše energije." #. TRANSLATORS: shown on the titlebar #. TRANSLATORS: the program name #: ../data/gnome-power-statistics.desktop.in.in.h:1 #: ../src/gpm-statistics.ui.h:1 ../src/gpm-statistics.c:1357 #: ../src/gpm-statistics.c:1830 msgid "Power Statistics" msgstr "Energetske statistike" #: ../data/gnome-power-statistics.desktop.in.in.h:3 msgid "battery;consumption;charge;" msgstr "baterija;potrošnja;punjenje;" #: ../src/gpm-statistics.ui.h:2 ../src/gpm-statistics.c:472 msgid "Details" msgstr "Pojedinosti" #: ../src/gpm-statistics.ui.h:3 msgid "Graph type:" msgstr "Vrsta grafikona:" #: ../src/gpm-statistics.ui.h:4 msgid "Data length:" msgstr "Dužina podatka:" #: ../src/gpm-statistics.ui.h:5 msgid "There is no data to display." msgstr "Nema podataka za prikazati." #: ../src/gpm-statistics.ui.h:6 msgid "Use smoothed line" msgstr "Koristi izglađenu liniju" #: ../src/gpm-statistics.ui.h:7 msgid "Show data points" msgstr "Pokaži točke podataka" #: ../src/gpm-statistics.ui.h:8 msgid "History" msgstr "Povijest" #: ../src/gpm-statistics.ui.h:9 msgid "Statistics" msgstr "Statistika" #: ../src/gpm-statistics.ui.h:10 msgid "Processor wakeups per second:" msgstr "Broj buđenja procesora po sekundi:" #: ../src/gpm-statistics.ui.h:11 msgid "0" msgstr "0" #: ../src/gpm-statistics.ui.h:12 ../src/gpm-statistics.c:458 msgid "Wakeups" msgstr "Buđenja" #. Translators: This is %i days #: ../src/gpm-graph-widget.c:432 #, c-format msgid "%id" msgstr "%id" #. Translators: This is %i days %02i hours #: ../src/gpm-graph-widget.c:435 #, c-format msgid "%id%02ih" msgstr "%id%02ih" #. Translators: This is %i hours #: ../src/gpm-graph-widget.c:440 #, c-format msgid "%ih" msgstr "%ih" #. Translators: This is %i hours %02i minutes #: ../src/gpm-graph-widget.c:443 #, c-format msgid "%ih%02im" msgstr "%ih%02im" #. Translators: This is %2i minutes #: ../src/gpm-graph-widget.c:448 #, c-format msgid "%2im" msgstr "%2im" #. Translators: This is %2i minutes %02i seconds #: ../src/gpm-graph-widget.c:451 #, c-format msgid "%2im%02i" msgstr "%2im%02i" #. Translators: This is %2i seconds #: ../src/gpm-graph-widget.c:455 #, c-format msgid "%2is" msgstr "%2is" #. Translators: This is %i Percentage #: ../src/gpm-graph-widget.c:459 #, c-format msgid "%i%%" msgstr "%i%%" #. Translators: This is %.1f Watts #: ../src/gpm-graph-widget.c:462 #, c-format msgid "%.1fW" msgstr "%.1fW" #. Translators: This is %.1f Volts #: ../src/gpm-graph-widget.c:467 #, c-format msgid "%.1fV" msgstr "%.1fV" #. TRANSLATORS: the rate of discharge for the device #: ../src/gpm-statistics.c:82 ../src/gpm-statistics.c:729 msgid "Rate" msgstr "Stopa" #: ../src/gpm-statistics.c:83 msgid "Charge" msgstr "Napunjenost" #: ../src/gpm-statistics.c:84 ../src/gpm-statistics.c:743 msgid "Time to full" msgstr "Vrijeme do napunjenosti" #: ../src/gpm-statistics.c:85 ../src/gpm-statistics.c:748 msgid "Time to empty" msgstr "Vrijeme do prazne baterije" #: ../src/gpm-statistics.c:92 msgid "10 minutes" msgstr "10 minuta" #: ../src/gpm-statistics.c:93 msgid "2 hours" msgstr "2 sata" #: ../src/gpm-statistics.c:94 msgid "6 hours" msgstr "6 sati" #: ../src/gpm-statistics.c:95 msgid "1 day" msgstr "1 dan" #: ../src/gpm-statistics.c:96 msgid "1 week" msgstr "1 tjedan" #. TRANSLATORS: what we've observed about the device #: ../src/gpm-statistics.c:105 msgid "Charge profile" msgstr "Profil punjenja" #: ../src/gpm-statistics.c:106 msgid "Discharge profile" msgstr "Profil pražnjenja" #. TRANSLATORS: how accurately we can predict the time remaining of the battery #: ../src/gpm-statistics.c:108 msgid "Charge accuracy" msgstr "Preciznost napunjenosti" #: ../src/gpm-statistics.c:109 msgid "Discharge accuracy" msgstr "Preciznost pražnjenja" #. TRANSLATORS: system power cord #: ../src/gpm-statistics.c:247 msgid "AC adapter" msgid_plural "AC adapters" msgstr[0] "AC adapter" msgstr[1] "AC adaptera" msgstr[2] "AC adaptera" #. TRANSLATORS: laptop primary battery #: ../src/gpm-statistics.c:251 msgid "Laptop battery" msgid_plural "Laptop batteries" msgstr[0] "Baterija prijenosnika" msgstr[1] "Baterije prijenosnika" msgstr[2] "Baterija prijenosnika" #. TRANSLATORS: battery-backed AC power source #: ../src/gpm-statistics.c:255 msgid "UPS" msgid_plural "UPSs" msgstr[0] "Neprekidno napajanje (UPS)" msgstr[1] "Neprekidna napajanja (UPS)" msgstr[2] "Neprekidnih napajanja (UPS)" #. TRANSLATORS: a monitor is a device to measure voltage and current #: ../src/gpm-statistics.c:259 msgid "Monitor" msgid_plural "Monitors" msgstr[0] "Mjerač" msgstr[1] "Mjerača" msgstr[2] "Mjerača" #. TRANSLATORS: wireless mice with internal batteries #: ../src/gpm-statistics.c:263 msgid "Mouse" msgid_plural "Mice" msgstr[0] "Miš" msgstr[1] "Miša" msgstr[2] "Miševa" #. TRANSLATORS: wireless keyboard with internal battery #: ../src/gpm-statistics.c:267 msgid "Keyboard" msgid_plural "Keyboards" msgstr[0] "Tipkovnica" msgstr[1] "Tipkovnice" msgstr[2] "Tipkovnica" #. TRANSLATORS: portable device #: ../src/gpm-statistics.c:271 msgid "PDA" msgid_plural "PDAs" msgstr[0] "Dlanovnik" msgstr[1] "Dlanovnika" msgstr[2] "Dlanovnika" #. TRANSLATORS: cell phone (mobile...) #: ../src/gpm-statistics.c:275 msgid "Cell phone" msgid_plural "Cell phones" msgstr[0] "Mobitel" msgstr[1] "Mobitela" msgstr[2] "Mobitela" #. TRANSLATORS: media player, mp3 etc #: ../src/gpm-statistics.c:280 msgid "Media player" msgid_plural "Media players" msgstr[0] "Medijski izvođač" msgstr[1] "Medijska izvođača" msgstr[2] "Medijskih izvođača" #. TRANSLATORS: tablet device #: ../src/gpm-statistics.c:284 msgid "Tablet" msgid_plural "Tablets" msgstr[0] "Tablet" msgstr[1] "Tableta" msgstr[2] "Tableta" #. TRANSLATORS: tablet device #: ../src/gpm-statistics.c:288 msgid "Computer" msgid_plural "Computers" msgstr[0] "Računalo" msgstr[1] "Računala" msgstr[2] "Računala" #. TRANSLATORS: battery technology #: ../src/gpm-statistics.c:308 msgid "Lithium Ion" msgstr "Litij-ionska" #. TRANSLATORS: battery technology #: ../src/gpm-statistics.c:312 msgid "Lithium Polymer" msgstr "Litij-polimerska" #. TRANSLATORS: battery technology #: ../src/gpm-statistics.c:316 msgid "Lithium Iron Phosphate" msgstr "Litij-željezno-fosfatna" #. TRANSLATORS: battery technology #: ../src/gpm-statistics.c:320 msgid "Lead acid" msgstr "Olovna kiselina" #. TRANSLATORS: battery technology #: ../src/gpm-statistics.c:324 msgid "Nickel Cadmium" msgstr "Nikal-kadmijska" #. TRANSLATORS: battery technology #: ../src/gpm-statistics.c:328 msgid "Nickel metal hydride" msgstr "Nikal metalno-hidridna" #. TRANSLATORS: battery technology #: ../src/gpm-statistics.c:332 msgid "Unknown technology" msgstr "Nepoznata tehnologija" #. TRANSLATORS: battery state #: ../src/gpm-statistics.c:352 msgid "Charging" msgstr "Punjenje" #. TRANSLATORS: battery state #: ../src/gpm-statistics.c:356 msgid "Discharging" msgstr "Pražnjenje" #. TRANSLATORS: battery state #: ../src/gpm-statistics.c:360 msgid "Empty" msgstr "Prazna" #. TRANSLATORS: battery state #: ../src/gpm-statistics.c:364 msgid "Charged" msgstr "Napunjena" #. TRANSLATORS: battery state #: ../src/gpm-statistics.c:368 msgid "Waiting to charge" msgstr "Čeka na punjenje" #. TRANSLATORS: battery state #: ../src/gpm-statistics.c:372 msgid "Waiting to discharge" msgstr "Čeka na pražnjenje" #. TRANSLATORS: battery state #. TRANSLATORS: this is when the stats time is not known #: ../src/gpm-statistics.c:376 ../src/gpm-statistics.c:550 msgid "Unknown" msgstr "Nepoznato" #: ../src/gpm-statistics.c:396 msgid "Attribute" msgstr "Obilježje" #: ../src/gpm-statistics.c:403 msgid "Value" msgstr "Vrijednost" #: ../src/gpm-statistics.c:420 msgid "Image" msgstr "Slika" #: ../src/gpm-statistics.c:426 msgid "Description" msgstr "Opis" #: ../src/gpm-statistics.c:445 ../src/gpm-statistics.c:668 msgid "Type" msgstr "Vrsta" #: ../src/gpm-statistics.c:451 msgid "ID" msgstr "ID" #: ../src/gpm-statistics.c:465 msgid "Command" msgstr "Naredba" #. TRANSLATORS: this is a time value, usually to show on a graph #: ../src/gpm-statistics.c:554 #, c-format msgid "%.0f second" msgid_plural "%.0f seconds" msgstr[0] "%.0f sekunda" msgstr[1] "%.0f sekunde" msgstr[2] "%.0f sekunda" #. TRANSLATORS: this is a time value, usually to show on a graph #: ../src/gpm-statistics.c:559 #, c-format msgid "%.1f minute" msgid_plural "%.1f minutes" msgstr[0] "%.1f minuta" msgstr[1] "%.1f minute" msgstr[2] "%.1f minuta" #. TRANSLATORS: this is a time value, usually to show on a graph #: ../src/gpm-statistics.c:564 #, c-format msgid "%.1f hour" msgid_plural "%.1f hours" msgstr[0] "%.1f sat" msgstr[1] "%.1f sata" msgstr[2] "%.1f sati" #. TRANSLATORS: this is a time value, usually to show on a graph #: ../src/gpm-statistics.c:568 #, c-format msgid "%.1f day" msgid_plural "%.1f days" msgstr[0] "%.1f dan" msgstr[1] "%.1f dana" msgstr[2] "%.1f dana" #: ../src/gpm-statistics.c:577 msgid "Yes" msgstr "Da" #: ../src/gpm-statistics.c:577 msgid "No" msgstr "Ne" #. TRANSLATORS: the device ID of the current device, e.g. "battery0" #: ../src/gpm-statistics.c:666 msgid "Device" msgstr "Uređaj" #: ../src/gpm-statistics.c:670 msgid "Vendor" msgstr "Proizvođač" #: ../src/gpm-statistics.c:672 msgid "Model" msgstr "Model" #: ../src/gpm-statistics.c:674 msgid "Serial number" msgstr "Serijski broj" #. TRANSLATORS: a boolean attribute that means if the device is supplying the #. * main power for the computer. For instance, an AC adapter or laptop battery #. * would be TRUE, but a mobile phone or mouse taking power is FALSE #: ../src/gpm-statistics.c:679 msgid "Supply" msgstr "Opskrbljuje energijom" #: ../src/gpm-statistics.c:682 #, c-format msgid "%d second" msgid_plural "%d seconds" msgstr[0] "%d sekunda" msgstr[1] "%d sekunde" msgstr[2] "%d sekundi" #. TRANSLATORS: when the device was last updated with new data. It's #. * usually a few seconds when a device is discharging or charging. #: ../src/gpm-statistics.c:686 msgid "Refreshed" msgstr "Osvježen" #. TRANSLATORS: Present is whether the device is currently attached #. * to the computer, as some devices (e.g. laptop batteries) can #. * be removed, but still observed as devices on the system #: ../src/gpm-statistics.c:696 msgid "Present" msgstr "Prisutan" #. TRANSLATORS: If the device can be recharged, e.g. lithium #. * batteries rather than alkaline ones #: ../src/gpm-statistics.c:703 msgid "Rechargeable" msgstr "Punjiva" #. TRANSLATORS: The state of the device, e.g. "Changing" or "Fully charged" #: ../src/gpm-statistics.c:709 msgid "State" msgstr "Stanje" #: ../src/gpm-statistics.c:713 msgid "Energy" msgstr "Energija" #: ../src/gpm-statistics.c:716 msgid "Energy when empty" msgstr "Energija kad je prazna" #: ../src/gpm-statistics.c:719 msgid "Energy when full" msgstr "Energija kad je puna" #: ../src/gpm-statistics.c:722 msgid "Energy (design)" msgstr "Energija (dizajn)" #: ../src/gpm-statistics.c:736 msgid "Voltage" msgstr "Voltaža" #. TRANSLATORS: the amount of charge the cell contains #: ../src/gpm-statistics.c:758 msgid "Percentage" msgstr "Postotak" #. TRANSLATORS: the capacity of the device, which is basically a measure #. * of how full it can get, relative to the design capacity #: ../src/gpm-statistics.c:765 msgid "Capacity" msgstr "Zapremnina" #. TRANSLATORS: the type of battery, e.g. lithium or nikel metal hydroxide #: ../src/gpm-statistics.c:770 msgid "Technology" msgstr "Tehnologija" #. TRANSLATORS: this is when the device is plugged in, typically #. * only shown for the ac adaptor device #: ../src/gpm-statistics.c:775 msgid "Online" msgstr "Priključen" #. TRANSLATORS: the command line was not provided #: ../src/gpm-statistics.c:1098 msgid "No data" msgstr "Nema podataka" #. TRANSLATORS: kernel module, usually a device driver #: ../src/gpm-statistics.c:1105 ../src/gpm-statistics.c:1110 msgid "Kernel module" msgstr "Kernelski modul" #. TRANSLATORS: kernel housekeeping #: ../src/gpm-statistics.c:1115 msgid "Kernel core" msgstr "Jezgra kernela" #. TRANSLATORS: interrupt between processors #: ../src/gpm-statistics.c:1120 msgid "Interprocessor interrupt" msgstr "Međuprocesorski prekid" #. TRANSLATORS: unknown interrupt #: ../src/gpm-statistics.c:1125 msgid "Interrupt" msgstr "Prekid" #. TRANSLATORS: the keyboard and mouse device event #: ../src/gpm-statistics.c:1171 msgid "PS/2 keyboard/mouse/touchpad" msgstr "PS/2 tipkovnica/miš/touchpad" #. TRANSLATORS: ACPI, the Intel power standard on laptops and desktops #: ../src/gpm-statistics.c:1174 msgid "ACPI" msgstr "ACPI" #. TRANSLATORS: serial ATA is a new style of hard disk interface #: ../src/gpm-statistics.c:1177 msgid "Serial ATA" msgstr "Serijski ATA" #. TRANSLATORS: this is the old-style ATA interface #: ../src/gpm-statistics.c:1180 msgid "ATA host controller" msgstr "ATA host kontroler" #. TRANSLATORS: 802.11 wireless adaptor #: ../src/gpm-statistics.c:1183 msgid "Intel wireless adaptor" msgstr "Intelov bežični adapter" #. TRANSLATORS: a timer is something that fires periodically. #. * The parameter is a process name, e.g. "firefox-bin". #. * This is shown when the timer wakes up. #: ../src/gpm-statistics.c:1190 ../src/gpm-statistics.c:1195 #: ../src/gpm-statistics.c:1200 ../src/gpm-statistics.c:1205 #: ../src/gpm-statistics.c:1210 #, c-format msgid "Timer %s" msgstr "Mjerač vremena %s" #. TRANSLATORS: the parameter is the name of task that's woken up from sleeping. #. * This is shown when the task wakes up. #: ../src/gpm-statistics.c:1214 #, c-format msgid "Sleep %s" msgstr "Iz spavanja %s" #. TRANSLATORS: this is the name of a new realtime task. #: ../src/gpm-statistics.c:1217 #, c-format msgid "New task %s" msgstr "Novi zadatak %s" #. TRANSLATORS: this is the name of a task that's woken to check state. #. * This is shown when the task wakes up. #: ../src/gpm-statistics.c:1221 #, c-format msgid "Wait %s" msgstr "Čeka %s" #. TRANSLATORS: this is the name of a work queue. #. * A work queue is a list of work that has to be done. #: ../src/gpm-statistics.c:1225 ../src/gpm-statistics.c:1229 #, c-format msgid "Work queue %s" msgstr "Radni red %s" #. TRANSLATORS: this is when the networking subsystem clears out old entries #: ../src/gpm-statistics.c:1232 #, c-format msgid "Network route flush %s" msgstr "Brisanje mrežne rute %s" #. TRANSLATORS: this is the name of an activity on the USB bus #: ../src/gpm-statistics.c:1235 #, c-format msgid "USB activity %s" msgstr "USB aktivnost %s" #. TRANSLATORS: we've timed out of an aligned timer, with the name #: ../src/gpm-statistics.c:1238 #, c-format msgid "Wakeup %s" msgstr "Buđenje %s" #. TRANSLATORS: interupts on the system required for basic operation #: ../src/gpm-statistics.c:1241 msgid "Local interrupts" msgstr "Lokalni prekidi" #. TRANSLATORS: interrupts when a task gets moved from one core to another #: ../src/gpm-statistics.c:1244 msgid "Rescheduling interrupts" msgstr "Prekidi novih rasporeda" #. TRANSLATORS: shown on the titlebar #: ../src/gpm-statistics.c:1347 msgid "Device Information" msgstr "Informacije o uređaju" #. TRANSLATORS: shown on the titlebar #: ../src/gpm-statistics.c:1349 msgid "Device History" msgstr "Povijest o uređaju" #. TRANSLATORS: shown on the titlebar #: ../src/gpm-statistics.c:1351 msgid "Device Profile" msgstr "Profil uređaja" #. TRANSLATORS: shown on the titlebar #: ../src/gpm-statistics.c:1353 msgid "Processor Wakeups" msgstr "Buđenja procesora" #. TRANSLATORS: this is the X axis on the graph #: ../src/gpm-statistics.c:1557 ../src/gpm-statistics.c:1563 #: ../src/gpm-statistics.c:1569 ../src/gpm-statistics.c:1575 msgid "Time elapsed" msgstr "Proteklo vrijeme" #. TRANSLATORS: this is the Y axis on the graph #: ../src/gpm-statistics.c:1559 msgid "Power" msgstr "Energija" #. TRANSLATORS: this is the Y axis on the graph for the whole battery device #. TRANSLATORS: this is the X axis on the graph for the whole battery device #: ../src/gpm-statistics.c:1565 ../src/gpm-statistics.c:1607 #: ../src/gpm-statistics.c:1613 ../src/gpm-statistics.c:1619 #: ../src/gpm-statistics.c:1625 msgid "Cell charge" msgstr "Napunjenost ćelije" #. TRANSLATORS: this is the Y axis on the graph #: ../src/gpm-statistics.c:1571 ../src/gpm-statistics.c:1577 msgid "Predicted time" msgstr "Predviđeno vrijeme" #. TRANSLATORS: this is the Y axis on the graph #: ../src/gpm-statistics.c:1609 ../src/gpm-statistics.c:1621 msgid "Correction factor" msgstr "Faktor ispravljanja" #. TRANSLATORS: this is the Y axis on the graph #: ../src/gpm-statistics.c:1615 ../src/gpm-statistics.c:1627 msgid "Prediction accuracy" msgstr "Preciznost predviđanja" #. TRANSLATORS: show verbose debugging #: ../src/gpm-statistics.c:1818 msgid "Show extra debugging information" msgstr "Prikaži dodatne informacije o rješavanju grešaka" #. TRANSLATORS: show a device by default #: ../src/gpm-statistics.c:1821 msgid "Select this device at startup" msgstr "Odaberi ovaj uređaj pri pokretanju" #. TRANSLATORS: the icon for the CPU #: ../src/gpm-statistics.c:2072 msgid "Processor" msgstr "Procesor" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/glib20.po0000644000000000000000000032066212704126313017623 0ustar # Translation of glib to Croatiann # Copyright (C) Croatiann team # Translators: Denis Lackovic ,Robert Sedak , msgid "" msgstr "" "Project-Id-Version: glib 0\n" "Report-Msgid-Bugs-To: " "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&keywords=I18N+L10N&compo" "nent=general\n" "POT-Creation-Date: 2016-03-22 11:25-0400\n" "PO-Revision-Date: 2015-12-25 11:11+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2016-04-15 05:45+0000\n" "X-Generator: Launchpad (build 17995)\n" "Language: hr\n" #: ../gio/gapplication.c:493 msgid "GApplication options" msgstr "" #: ../gio/gapplication.c:493 msgid "Show GApplication options" msgstr "" #: ../gio/gapplication.c:538 msgid "Enter GApplication service mode (use from D-Bus service files)" msgstr "" #: ../gio/gapplication.c:550 msgid "Override the application's ID" msgstr "" #: ../gio/gapplication-tool.c:45 ../gio/gapplication-tool.c:46 #: ../gio/gresource-tool.c:488 ../gio/gsettings-tool.c:512 msgid "Print help" msgstr "" #: ../gio/gapplication-tool.c:47 ../gio/gresource-tool.c:489 #: ../gio/gresource-tool.c:557 msgid "[COMMAND]" msgstr "" #: ../gio/gapplication-tool.c:49 msgid "Print version" msgstr "" #: ../gio/gapplication-tool.c:50 ../gio/gsettings-tool.c:518 msgid "Print version information and exit" msgstr "" #: ../gio/gapplication-tool.c:52 msgid "List applications" msgstr "" #: ../gio/gapplication-tool.c:53 msgid "List the installed D-Bus activatable applications (by .desktop files)" msgstr "" #: ../gio/gapplication-tool.c:55 msgid "Launch an application" msgstr "" #: ../gio/gapplication-tool.c:56 msgid "Launch the application (with optional files to open)" msgstr "" #: ../gio/gapplication-tool.c:57 msgid "APPID [FILE...]" msgstr "" #: ../gio/gapplication-tool.c:59 msgid "Activate an action" msgstr "" #: ../gio/gapplication-tool.c:60 msgid "Invoke an action on the application" msgstr "" #: ../gio/gapplication-tool.c:61 msgid "APPID ACTION [PARAMETER]" msgstr "" #: ../gio/gapplication-tool.c:63 msgid "List available actions" msgstr "" #: ../gio/gapplication-tool.c:64 msgid "List static actions for an application (from .desktop file)" msgstr "" #: ../gio/gapplication-tool.c:65 ../gio/gapplication-tool.c:71 msgid "APPID" msgstr "" #: ../gio/gapplication-tool.c:70 ../gio/gapplication-tool.c:133 #: ../gio/gdbus-tool.c:90 msgid "COMMAND" msgstr "" #: ../gio/gapplication-tool.c:70 msgid "The command to print detailed help for" msgstr "" #: ../gio/gapplication-tool.c:71 msgid "Application identifier in D-Bus format (eg: org.example.viewer)" msgstr "" #: ../gio/gapplication-tool.c:72 ../gio/glib-compile-resources.c:592 #: ../gio/glib-compile-resources.c:623 ../gio/gresource-tool.c:495 #: ../gio/gresource-tool.c:561 msgid "FILE" msgstr "" #: ../gio/gapplication-tool.c:72 msgid "Optional relative or absolute filenames, or URIs to open" msgstr "" #: ../gio/gapplication-tool.c:73 msgid "ACTION" msgstr "" #: ../gio/gapplication-tool.c:73 msgid "The action name to invoke" msgstr "" #: ../gio/gapplication-tool.c:74 msgid "PARAMETER" msgstr "" #: ../gio/gapplication-tool.c:74 msgid "Optional parameter to the action invocation, in GVariant format" msgstr "" #: ../gio/gapplication-tool.c:96 ../gio/gresource-tool.c:526 #: ../gio/gsettings-tool.c:598 #, c-format msgid "" "Unknown command %s\n" "\n" msgstr "" #: ../gio/gapplication-tool.c:101 msgid "Usage:\n" msgstr "" #: ../gio/gapplication-tool.c:114 ../gio/gresource-tool.c:551 #: ../gio/gsettings-tool.c:632 msgid "Arguments:\n" msgstr "" #: ../gio/gapplication-tool.c:133 msgid "[ARGS...]" msgstr "" #: ../gio/gapplication-tool.c:134 #, c-format msgid "Commands:\n" msgstr "" #. Translators: do not translate 'help', but please translate 'COMMAND'. #: ../gio/gapplication-tool.c:146 #, c-format msgid "" "Use '%s help COMMAND' to get detailed help.\n" "\n" msgstr "" #: ../gio/gapplication-tool.c:165 #, c-format msgid "" "%s command requires an application id to directly follow\n" "\n" msgstr "" #: ../gio/gapplication-tool.c:171 #, c-format msgid "invalid application id: '%s'\n" msgstr "" #. Translators: %s is replaced with a command name like 'list-actions' #: ../gio/gapplication-tool.c:182 #, c-format msgid "" "'%s' takes no arguments\n" "\n" msgstr "" #: ../gio/gapplication-tool.c:266 #, c-format msgid "unable to connect to D-Bus: %s\n" msgstr "" #: ../gio/gapplication-tool.c:286 #, c-format msgid "error sending %s message to application: %s\n" msgstr "" #: ../gio/gapplication-tool.c:317 #, c-format msgid "action name must be given after application id\n" msgstr "" #: ../gio/gapplication-tool.c:325 #, c-format msgid "" "invalid action name: '%s'\n" "action names must consist of only alphanumerics, '-' and '.'\n" msgstr "" #: ../gio/gapplication-tool.c:344 #, c-format msgid "error parsing action parameter: %s\n" msgstr "" #: ../gio/gapplication-tool.c:356 #, c-format msgid "actions accept a maximum of one parameter\n" msgstr "" #: ../gio/gapplication-tool.c:411 #, c-format msgid "list-actions command takes only the application id" msgstr "" #: ../gio/gapplication-tool.c:421 #, c-format msgid "unable to find desktop file for application %s\n" msgstr "" #: ../gio/gapplication-tool.c:466 #, c-format msgid "" "unrecognised command: %s\n" "\n" msgstr "" #: ../gio/gbufferedinputstream.c:420 ../gio/gbufferedinputstream.c:498 #: ../gio/ginputstream.c:179 ../gio/ginputstream.c:379 #: ../gio/ginputstream.c:617 ../gio/ginputstream.c:1016 #: ../gio/goutputstream.c:203 ../gio/goutputstream.c:834 #: ../gio/gpollableinputstream.c:205 ../gio/gpollableoutputstream.c:206 #, c-format msgid "Too large count value passed to %s" msgstr "" #: ../gio/gbufferedinputstream.c:891 ../gio/gbufferedoutputstream.c:575 #: ../gio/gdataoutputstream.c:562 msgid "Seek not supported on base stream" msgstr "" #: ../gio/gbufferedinputstream.c:937 msgid "Cannot truncate GBufferedInputStream" msgstr "" #: ../gio/gbufferedinputstream.c:982 ../gio/ginputstream.c:1205 #: ../gio/giostream.c:300 ../gio/goutputstream.c:1658 msgid "Stream is already closed" msgstr "" #: ../gio/gbufferedoutputstream.c:612 ../gio/gdataoutputstream.c:592 msgid "Truncate not supported on base stream" msgstr "" #: ../gio/gcancellable.c:317 ../gio/gdbusconnection.c:1847 #: ../gio/gdbusprivate.c:1375 ../gio/glocalfile.c:2220 #: ../gio/gsimpleasyncresult.c:870 ../gio/gsimpleasyncresult.c:896 #, c-format msgid "Operation was cancelled" msgstr "" #: ../gio/gcharsetconverter.c:260 msgid "Invalid object, not initialized" msgstr "" #: ../gio/gcharsetconverter.c:281 ../gio/gcharsetconverter.c:309 msgid "Incomplete multibyte sequence in input" msgstr "" #: ../gio/gcharsetconverter.c:315 ../gio/gcharsetconverter.c:324 msgid "Not enough space in destination" msgstr "" #: ../gio/gcharsetconverter.c:342 ../gio/gdatainputstream.c:848 #: ../gio/gdatainputstream.c:1256 ../glib/gconvert.c:438 ../glib/gconvert.c:845 #: ../glib/giochannel.c:1556 ../glib/giochannel.c:1598 #: ../glib/giochannel.c:2442 ../glib/gutf8.c:853 ../glib/gutf8.c:1306 msgid "Invalid byte sequence in conversion input" msgstr "Neispravna sekvenca bajtova u izlazu konverzije" #: ../gio/gcharsetconverter.c:347 ../glib/gconvert.c:446 ../glib/gconvert.c:770 #: ../glib/giochannel.c:1563 ../glib/giochannel.c:2454 #, c-format msgid "Error during conversion: %s" msgstr "Greška prilikom konverzije: %s" #: ../gio/gcharsetconverter.c:444 ../gio/gsocket.c:1078 msgid "Cancellable initialization not supported" msgstr "" #: ../gio/gcharsetconverter.c:454 ../glib/gconvert.c:321 #: ../glib/giochannel.c:1384 #, c-format msgid "Conversion from character set '%s' to '%s' is not supported" msgstr "Pretvaranje iz znakovnog skupa '%s' u '%s' nije podržana" #: ../gio/gcharsetconverter.c:458 ../glib/gconvert.c:325 #, c-format msgid "Could not open converter from '%s' to '%s'" msgstr "Ne mogu otvoriti pretvornik iz %s' u '%s'" #: ../gio/gcontenttype.c:335 #, c-format msgid "%s type" msgstr "" #: ../gio/gcontenttype-win32.c:160 msgid "Unknown type" msgstr "" #: ../gio/gcontenttype-win32.c:162 #, c-format msgid "%s filetype" msgstr "" #: ../gio/gcredentials.c:312 ../gio/gcredentials.c:571 msgid "GCredentials is not implemented on this OS" msgstr "" #: ../gio/gcredentials.c:467 msgid "There is no GCredentials support for your platform" msgstr "" #: ../gio/gcredentials.c:513 msgid "GCredentials does not contain a process ID on this OS" msgstr "" #: ../gio/gcredentials.c:565 msgid "Credentials spoofing is not possible on this OS" msgstr "" #: ../gio/gdatainputstream.c:304 msgid "Unexpected early end-of-stream" msgstr "" #: ../gio/gdbusaddress.c:153 ../gio/gdbusaddress.c:241 #: ../gio/gdbusaddress.c:322 #, c-format msgid "Unsupported key '%s' in address entry '%s'" msgstr "" #: ../gio/gdbusaddress.c:180 #, c-format msgid "" "Address '%s' is invalid (need exactly one of path, tmpdir or abstract keys)" msgstr "" #: ../gio/gdbusaddress.c:193 #, c-format msgid "Meaningless key/value pair combination in address entry '%s'" msgstr "" #: ../gio/gdbusaddress.c:256 ../gio/gdbusaddress.c:337 #, c-format msgid "Error in address '%s' - the port attribute is malformed" msgstr "" #: ../gio/gdbusaddress.c:267 ../gio/gdbusaddress.c:348 #, c-format msgid "Error in address '%s' - the family attribute is malformed" msgstr "" #: ../gio/gdbusaddress.c:457 #, c-format msgid "Address element '%s' does not contain a colon (:)" msgstr "" #: ../gio/gdbusaddress.c:478 #, c-format msgid "" "Key/Value pair %d, '%s', in address element '%s' does not contain an equal " "sign" msgstr "" #: ../gio/gdbusaddress.c:492 #, c-format msgid "" "Error unescaping key or value in Key/Value pair %d, '%s', in address element " "'%s'" msgstr "" #: ../gio/gdbusaddress.c:570 #, c-format msgid "" "Error in address '%s' - the unix transport requires exactly one of the keys " "'path' or 'abstract' to be set" msgstr "" #: ../gio/gdbusaddress.c:606 #, c-format msgid "Error in address '%s' - the host attribute is missing or malformed" msgstr "" #: ../gio/gdbusaddress.c:620 #, c-format msgid "Error in address '%s' - the port attribute is missing or malformed" msgstr "" #: ../gio/gdbusaddress.c:634 #, c-format msgid "" "Error in address '%s' - the noncefile attribute is missing or malformed" msgstr "" #: ../gio/gdbusaddress.c:655 msgid "Error auto-launching: " msgstr "" #: ../gio/gdbusaddress.c:663 #, c-format msgid "Unknown or unsupported transport '%s' for address '%s'" msgstr "" #: ../gio/gdbusaddress.c:699 #, c-format msgid "Error opening nonce file '%s': %s" msgstr "" #: ../gio/gdbusaddress.c:717 #, c-format msgid "Error reading from nonce file '%s': %s" msgstr "" #: ../gio/gdbusaddress.c:726 #, c-format msgid "Error reading from nonce file '%s', expected 16 bytes, got %d" msgstr "" #: ../gio/gdbusaddress.c:744 #, c-format msgid "Error writing contents of nonce file '%s' to stream:" msgstr "" #: ../gio/gdbusaddress.c:950 msgid "The given address is empty" msgstr "" #: ../gio/gdbusaddress.c:1063 #, c-format msgid "Cannot spawn a message bus when setuid" msgstr "" #: ../gio/gdbusaddress.c:1070 msgid "Cannot spawn a message bus without a machine-id: " msgstr "" #: ../gio/gdbusaddress.c:1112 #, c-format msgid "Error spawning command line '%s': " msgstr "" #: ../gio/gdbusaddress.c:1329 #, c-format msgid "(Type any character to close this window)\n" msgstr "" #: ../gio/gdbusaddress.c:1481 #, c-format msgid "Session dbus not running, and autolaunch failed" msgstr "" #: ../gio/gdbusaddress.c:1492 #, c-format msgid "Cannot determine session bus address (not implemented for this OS)" msgstr "" #: ../gio/gdbusaddress.c:1627 ../gio/gdbusconnection.c:7128 #, c-format msgid "" "Cannot determine bus address from DBUS_STARTER_BUS_TYPE environment variable " "- unknown value '%s'" msgstr "" #: ../gio/gdbusaddress.c:1636 ../gio/gdbusconnection.c:7137 msgid "" "Cannot determine bus address because the DBUS_STARTER_BUS_TYPE environment " "variable is not set" msgstr "" #: ../gio/gdbusaddress.c:1646 #, c-format msgid "Unknown bus type %d" msgstr "" #: ../gio/gdbusauth.c:293 msgid "Unexpected lack of content trying to read a line" msgstr "" #: ../gio/gdbusauth.c:337 msgid "Unexpected lack of content trying to (safely) read a line" msgstr "" #: ../gio/gdbusauth.c:508 #, c-format msgid "" "Exhausted all available authentication mechanisms (tried: %s) (available: %s)" msgstr "" #: ../gio/gdbusauth.c:1170 msgid "Cancelled via GDBusAuthObserver::authorize-authenticated-peer" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:261 #, c-format msgid "Error when getting information for directory '%s': %s" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:273 #, c-format msgid "" "Permissions on directory '%s' are malformed. Expected mode 0700, got 0%o" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:294 #, c-format msgid "Error creating directory '%s': %s" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:377 #, c-format msgid "Error opening keyring '%s' for reading: " msgstr "" #: ../gio/gdbusauthmechanismsha1.c:401 ../gio/gdbusauthmechanismsha1.c:714 #, c-format msgid "Line %d of the keyring at '%s' with content '%s' is malformed" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:415 ../gio/gdbusauthmechanismsha1.c:728 #, c-format msgid "" "First token of line %d of the keyring at '%s' with content '%s' is malformed" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:430 ../gio/gdbusauthmechanismsha1.c:742 #, c-format msgid "" "Second token of line %d of the keyring at '%s' with content '%s' is malformed" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:454 #, c-format msgid "Didn't find cookie with id %d in the keyring at '%s'" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:532 #, c-format msgid "Error deleting stale lock file '%s': %s" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:564 #, c-format msgid "Error creating lock file '%s': %s" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:594 #, c-format msgid "Error closing (unlinked) lock file '%s': %s" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:604 #, c-format msgid "Error unlinking lock file '%s': %s" msgstr "" #: ../gio/gdbusauthmechanismsha1.c:681 #, c-format msgid "Error opening keyring '%s' for writing: " msgstr "" #: ../gio/gdbusauthmechanismsha1.c:878 #, c-format msgid "(Additionally, releasing the lock for '%s' also failed: %s) " msgstr "" #: ../gio/gdbusconnection.c:612 ../gio/gdbusconnection.c:2373 msgid "The connection is closed" msgstr "" #: ../gio/gdbusconnection.c:1877 msgid "Timeout was reached" msgstr "" #: ../gio/gdbusconnection.c:2495 msgid "" "Unsupported flags encountered when constructing a client-side connection" msgstr "" #: ../gio/gdbusconnection.c:4105 ../gio/gdbusconnection.c:4452 #, c-format msgid "" "No such interface 'org.freedesktop.DBus.Properties' on object at path %s" msgstr "" #: ../gio/gdbusconnection.c:4247 #, c-format msgid "No such property '%s'" msgstr "" #: ../gio/gdbusconnection.c:4259 #, c-format msgid "Property '%s' is not readable" msgstr "" #: ../gio/gdbusconnection.c:4270 #, c-format msgid "Property '%s' is not writable" msgstr "" #: ../gio/gdbusconnection.c:4290 #, c-format msgid "Error setting property '%s': Expected type '%s' but got '%s'" msgstr "" #: ../gio/gdbusconnection.c:4395 ../gio/gdbusconnection.c:6568 #, c-format msgid "No such interface '%s'" msgstr "" #: ../gio/gdbusconnection.c:4603 msgid "No such interface" msgstr "" #: ../gio/gdbusconnection.c:4821 ../gio/gdbusconnection.c:7077 #, c-format msgid "No such interface '%s' on object at path %s" msgstr "" #: ../gio/gdbusconnection.c:4919 #, c-format msgid "No such method '%s'" msgstr "" #: ../gio/gdbusconnection.c:4950 #, c-format msgid "Type of message, '%s', does not match expected type '%s'" msgstr "" #: ../gio/gdbusconnection.c:5148 #, c-format msgid "An object is already exported for the interface %s at %s" msgstr "" #: ../gio/gdbusconnection.c:5374 #, c-format msgid "Unable to retrieve property %s.%s" msgstr "" #: ../gio/gdbusconnection.c:5430 #, c-format msgid "Unable to set property %s.%s" msgstr "" #: ../gio/gdbusconnection.c:5606 #, c-format msgid "Method '%s' returned type '%s', but expected '%s'" msgstr "" #: ../gio/gdbusconnection.c:6679 #, c-format msgid "Method '%s' on interface '%s' with signature '%s' does not exist" msgstr "" #: ../gio/gdbusconnection.c:6800 #, c-format msgid "A subtree is already exported for %s" msgstr "" #: ../gio/gdbusmessage.c:1244 msgid "type is INVALID" msgstr "" #: ../gio/gdbusmessage.c:1255 msgid "METHOD_CALL message: PATH or MEMBER header field is missing" msgstr "" #: ../gio/gdbusmessage.c:1266 msgid "METHOD_RETURN message: REPLY_SERIAL header field is missing" msgstr "" #: ../gio/gdbusmessage.c:1278 msgid "ERROR message: REPLY_SERIAL or ERROR_NAME header field is missing" msgstr "" #: ../gio/gdbusmessage.c:1291 msgid "SIGNAL message: PATH, INTERFACE or MEMBER header field is missing" msgstr "" #: ../gio/gdbusmessage.c:1299 msgid "" "SIGNAL message: The PATH header field is using the reserved value " "/org/freedesktop/DBus/Local" msgstr "" #: ../gio/gdbusmessage.c:1307 msgid "" "SIGNAL message: The INTERFACE header field is using the reserved value " "org.freedesktop.DBus.Local" msgstr "" #: ../gio/gdbusmessage.c:1355 ../gio/gdbusmessage.c:1415 #, c-format msgid "Wanted to read %lu byte but only got %lu" msgid_plural "Wanted to read %lu bytes but only got %lu" msgstr[0] "" msgstr[1] "" #: ../gio/gdbusmessage.c:1369 #, c-format msgid "Expected NUL byte after the string '%s' but found byte %d" msgstr "" #: ../gio/gdbusmessage.c:1388 #, c-format msgid "" "Expected valid UTF-8 string but found invalid bytes at byte offset %d " "(length of string is %d). The valid UTF-8 string up until that point was '%s'" msgstr "" #: ../gio/gdbusmessage.c:1587 #, c-format msgid "Parsed value '%s' is not a valid D-Bus object path" msgstr "" #: ../gio/gdbusmessage.c:1609 #, c-format msgid "Parsed value '%s' is not a valid D-Bus signature" msgstr "" #: ../gio/gdbusmessage.c:1656 #, c-format msgid "" "Encountered array of length %u byte. Maximum length is 2<<26 bytes (64 MiB)." msgid_plural "" "Encountered array of length %u bytes. Maximum length is 2<<26 bytes (64 MiB)." msgstr[0] "" msgstr[1] "" #: ../gio/gdbusmessage.c:1676 #, c-format msgid "" "Encountered array of type 'a%c', expected to have a length a multiple of %u " "bytes, but found to be %u bytes in length" msgstr "" #: ../gio/gdbusmessage.c:1843 #, c-format msgid "Parsed value '%s' for variant is not a valid D-Bus signature" msgstr "" #: ../gio/gdbusmessage.c:1867 #, c-format msgid "" "Error deserializing GVariant with type string '%s' from the D-Bus wire format" msgstr "" #: ../gio/gdbusmessage.c:2051 #, c-format msgid "" "Invalid endianness value. Expected 0x6c ('l') or 0x42 ('B') but found value " "0x%02x" msgstr "" #: ../gio/gdbusmessage.c:2064 #, c-format msgid "Invalid major protocol version. Expected 1 but found %d" msgstr "" #: ../gio/gdbusmessage.c:2120 #, c-format msgid "Signature header with signature '%s' found but message body is empty" msgstr "" #: ../gio/gdbusmessage.c:2134 #, c-format msgid "Parsed value '%s' is not a valid D-Bus signature (for body)" msgstr "" #: ../gio/gdbusmessage.c:2164 #, c-format msgid "No signature header in message but the message body is %u byte" msgid_plural "" "No signature header in message but the message body is %u bytes" msgstr[0] "" msgstr[1] "" #: ../gio/gdbusmessage.c:2174 msgid "Cannot deserialize message: " msgstr "" #: ../gio/gdbusmessage.c:2515 #, c-format msgid "" "Error serializing GVariant with type string '%s' to the D-Bus wire format" msgstr "" #: ../gio/gdbusmessage.c:2652 #, c-format msgid "" "Message has %d file descriptors but the header field indicates %d file " "descriptors" msgstr "" #: ../gio/gdbusmessage.c:2660 msgid "Cannot serialize message: " msgstr "" #: ../gio/gdbusmessage.c:2704 #, c-format msgid "Message body has signature '%s' but there is no signature header" msgstr "" #: ../gio/gdbusmessage.c:2714 #, c-format msgid "" "Message body has type signature '%s' but signature in the header field is " "'%s'" msgstr "" #: ../gio/gdbusmessage.c:2730 #, c-format msgid "Message body is empty but signature in the header field is '(%s)'" msgstr "" #: ../gio/gdbusmessage.c:3283 #, c-format msgid "Error return with body of type '%s'" msgstr "" #: ../gio/gdbusmessage.c:3291 msgid "Error return with empty body" msgstr "" #: ../gio/gdbusprivate.c:2036 #, c-format msgid "Unable to get Hardware profile: %s" msgstr "" #: ../gio/gdbusprivate.c:2081 msgid "Unable to load /var/lib/dbus/machine-id or /etc/machine-id: " msgstr "" #: ../gio/gdbusproxy.c:1610 #, c-format msgid "Error calling StartServiceByName for %s: " msgstr "" #: ../gio/gdbusproxy.c:1633 #, c-format msgid "Unexpected reply %d from StartServiceByName(\"%s\") method" msgstr "" #: ../gio/gdbusproxy.c:2709 ../gio/gdbusproxy.c:2843 msgid "" "Cannot invoke method; proxy is for a well-known name without an owner and " "proxy was constructed with the G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START flag" msgstr "" #: ../gio/gdbusserver.c:708 msgid "Abstract name space not supported" msgstr "" #: ../gio/gdbusserver.c:795 msgid "Cannot specify nonce file when creating a server" msgstr "" #: ../gio/gdbusserver.c:873 #, c-format msgid "Error writing nonce file at '%s': %s" msgstr "" #: ../gio/gdbusserver.c:1044 #, c-format msgid "The string '%s' is not a valid D-Bus GUID" msgstr "" #: ../gio/gdbusserver.c:1084 #, c-format msgid "Cannot listen on unsupported transport '%s'" msgstr "" #: ../gio/gdbus-tool.c:95 #, c-format msgid "" "Commands:\n" " help Shows this information\n" " introspect Introspect a remote object\n" " monitor Monitor a remote object\n" " call Invoke a method on a remote object\n" " emit Emit a signal\n" "\n" "Use \"%s COMMAND --help\" to get help on each command.\n" msgstr "" #: ../gio/gdbus-tool.c:164 ../gio/gdbus-tool.c:226 ../gio/gdbus-tool.c:298 #: ../gio/gdbus-tool.c:322 ../gio/gdbus-tool.c:711 ../gio/gdbus-tool.c:1043 #: ../gio/gdbus-tool.c:1477 #, c-format msgid "Error: %s\n" msgstr "" #: ../gio/gdbus-tool.c:175 ../gio/gdbus-tool.c:239 ../gio/gdbus-tool.c:1493 #, c-format msgid "Error parsing introspection XML: %s\n" msgstr "" #: ../gio/gdbus-tool.c:208 #, c-format msgid "Error: %s is not a valid name\n" msgstr "" #: ../gio/gdbus-tool.c:356 msgid "Connect to the system bus" msgstr "" #: ../gio/gdbus-tool.c:357 msgid "Connect to the session bus" msgstr "" #: ../gio/gdbus-tool.c:358 msgid "Connect to given D-Bus address" msgstr "" #: ../gio/gdbus-tool.c:368 msgid "Connection Endpoint Options:" msgstr "" #: ../gio/gdbus-tool.c:369 msgid "Options specifying the connection endpoint" msgstr "" #: ../gio/gdbus-tool.c:391 #, c-format msgid "No connection endpoint specified" msgstr "" #: ../gio/gdbus-tool.c:401 #, c-format msgid "Multiple connection endpoints specified" msgstr "" #: ../gio/gdbus-tool.c:471 #, c-format msgid "" "Warning: According to introspection data, interface '%s' does not exist\n" msgstr "" #: ../gio/gdbus-tool.c:480 #, c-format msgid "" "Warning: According to introspection data, method '%s' does not exist on " "interface '%s'\n" msgstr "" #: ../gio/gdbus-tool.c:542 msgid "Optional destination for signal (unique name)" msgstr "" #: ../gio/gdbus-tool.c:543 msgid "Object path to emit signal on" msgstr "" #: ../gio/gdbus-tool.c:544 msgid "Signal and interface name" msgstr "" #: ../gio/gdbus-tool.c:576 msgid "Emit a signal." msgstr "" #: ../gio/gdbus-tool.c:610 ../gio/gdbus-tool.c:842 ../gio/gdbus-tool.c:1583 #: ../gio/gdbus-tool.c:1818 #, c-format msgid "Error connecting: %s\n" msgstr "" #: ../gio/gdbus-tool.c:622 #, c-format msgid "Error: object path not specified.\n" msgstr "" #: ../gio/gdbus-tool.c:627 ../gio/gdbus-tool.c:909 ../gio/gdbus-tool.c:1648 #: ../gio/gdbus-tool.c:1884 #, c-format msgid "Error: %s is not a valid object path\n" msgstr "" #: ../gio/gdbus-tool.c:633 #, c-format msgid "Error: signal not specified.\n" msgstr "" #: ../gio/gdbus-tool.c:640 #, c-format msgid "Error: signal must be the fully-qualified name.\n" msgstr "" #: ../gio/gdbus-tool.c:648 #, c-format msgid "Error: %s is not a valid interface name\n" msgstr "" #: ../gio/gdbus-tool.c:654 #, c-format msgid "Error: %s is not a valid member name\n" msgstr "" #: ../gio/gdbus-tool.c:660 #, c-format msgid "Error: %s is not a valid unique bus name.\n" msgstr "" #. Use the original non-"parse-me-harder" error #: ../gio/gdbus-tool.c:687 ../gio/gdbus-tool.c:1011 #, c-format msgid "Error parsing parameter %d: %s\n" msgstr "" #: ../gio/gdbus-tool.c:718 #, c-format msgid "Error flushing connection: %s\n" msgstr "" #: ../gio/gdbus-tool.c:745 msgid "Destination name to invoke method on" msgstr "" #: ../gio/gdbus-tool.c:746 msgid "Object path to invoke method on" msgstr "" #: ../gio/gdbus-tool.c:747 msgid "Method and interface name" msgstr "" #: ../gio/gdbus-tool.c:748 msgid "Timeout in seconds" msgstr "" #: ../gio/gdbus-tool.c:787 msgid "Invoke a method on a remote object." msgstr "" #: ../gio/gdbus-tool.c:862 ../gio/gdbus-tool.c:1602 ../gio/gdbus-tool.c:1837 #, c-format msgid "Error: Destination is not specified\n" msgstr "" #: ../gio/gdbus-tool.c:874 ../gio/gdbus-tool.c:1619 ../gio/gdbus-tool.c:1849 #, c-format msgid "Error: %s is not a valid bus name\n" msgstr "" #: ../gio/gdbus-tool.c:889 ../gio/gdbus-tool.c:1628 #, c-format msgid "Error: Object path is not specified\n" msgstr "" #: ../gio/gdbus-tool.c:924 #, c-format msgid "Error: Method name is not specified\n" msgstr "" #: ../gio/gdbus-tool.c:935 #, c-format msgid "Error: Method name '%s' is invalid\n" msgstr "" #: ../gio/gdbus-tool.c:1003 #, c-format msgid "Error parsing parameter %d of type '%s': %s\n" msgstr "" #: ../gio/gdbus-tool.c:1440 msgid "Destination name to introspect" msgstr "" #: ../gio/gdbus-tool.c:1441 msgid "Object path to introspect" msgstr "" #: ../gio/gdbus-tool.c:1442 msgid "Print XML" msgstr "" #: ../gio/gdbus-tool.c:1443 msgid "Introspect children" msgstr "" #: ../gio/gdbus-tool.c:1444 msgid "Only print properties" msgstr "" #: ../gio/gdbus-tool.c:1535 msgid "Introspect a remote object." msgstr "" #: ../gio/gdbus-tool.c:1740 msgid "Destination name to monitor" msgstr "" #: ../gio/gdbus-tool.c:1741 msgid "Object path to monitor" msgstr "" #: ../gio/gdbus-tool.c:1770 msgid "Monitor a remote object." msgstr "" #: ../gio/gdesktopappinfo.c:1993 ../gio/gdesktopappinfo.c:4503 msgid "Unnamed" msgstr "" #: ../gio/gdesktopappinfo.c:2402 msgid "Desktop file didn't specify Exec field" msgstr "" #: ../gio/gdesktopappinfo.c:2687 msgid "Unable to find terminal required for application" msgstr "" #: ../gio/gdesktopappinfo.c:3099 #, c-format msgid "Can't create user application configuration folder %s: %s" msgstr "" #: ../gio/gdesktopappinfo.c:3103 #, c-format msgid "Can't create user MIME configuration folder %s: %s" msgstr "" #: ../gio/gdesktopappinfo.c:3343 ../gio/gdesktopappinfo.c:3367 msgid "Application information lacks an identifier" msgstr "" #: ../gio/gdesktopappinfo.c:3601 #, c-format msgid "Can't create user desktop file %s" msgstr "" #: ../gio/gdesktopappinfo.c:3735 #, c-format msgid "Custom definition for %s" msgstr "" #: ../gio/gdrive.c:392 msgid "drive doesn't implement eject" msgstr "" #. Translators: This is an error #. * message for drive objects that #. * don't implement any of eject or eject_with_operation. #: ../gio/gdrive.c:470 msgid "drive doesn't implement eject or eject_with_operation" msgstr "" #: ../gio/gdrive.c:546 msgid "drive doesn't implement polling for media" msgstr "" #: ../gio/gdrive.c:751 msgid "drive doesn't implement start" msgstr "" #: ../gio/gdrive.c:853 msgid "drive doesn't implement stop" msgstr "" #: ../gio/gdummytlsbackend.c:195 ../gio/gdummytlsbackend.c:317 #: ../gio/gdummytlsbackend.c:509 msgid "TLS support is not available" msgstr "" #: ../gio/gdummytlsbackend.c:419 msgid "DTLS support is not available" msgstr "" #: ../gio/gemblem.c:323 #, c-format msgid "Can't handle version %d of GEmblem encoding" msgstr "" #: ../gio/gemblem.c:333 #, c-format msgid "Malformed number of tokens (%d) in GEmblem encoding" msgstr "" #: ../gio/gemblemedicon.c:362 #, c-format msgid "Can't handle version %d of GEmblemedIcon encoding" msgstr "" #: ../gio/gemblemedicon.c:372 #, c-format msgid "Malformed number of tokens (%d) in GEmblemedIcon encoding" msgstr "" #: ../gio/gemblemedicon.c:395 msgid "Expected a GEmblem for GEmblemedIcon" msgstr "" #: ../gio/gfile.c:969 ../gio/gfile.c:1207 ../gio/gfile.c:1345 #: ../gio/gfile.c:1583 ../gio/gfile.c:1638 ../gio/gfile.c:1696 #: ../gio/gfile.c:1780 ../gio/gfile.c:1837 ../gio/gfile.c:1901 #: ../gio/gfile.c:1956 ../gio/gfile.c:3604 ../gio/gfile.c:3659 #: ../gio/gfile.c:3894 ../gio/gfile.c:3936 ../gio/gfile.c:4404 #: ../gio/gfile.c:4815 ../gio/gfile.c:4900 ../gio/gfile.c:4990 #: ../gio/gfile.c:5087 ../gio/gfile.c:5174 ../gio/gfile.c:5275 #: ../gio/gfile.c:7796 ../gio/gfile.c:7886 ../gio/gfile.c:7970 #: ../gio/win32/gwinhttpfile.c:437 msgid "Operation not supported" msgstr "" #. Translators: This is an error message when #. * trying to find the enclosing (user visible) #. * mount of a file, but none exists. #. #. Translators: This is an error message when trying to #. * find the enclosing (user visible) mount of a file, but #. * none exists. #. Translators: This is an error message when trying to find #. * the enclosing (user visible) mount of a file, but none #. * exists. #: ../gio/gfile.c:1468 ../gio/glocalfile.c:1134 ../gio/glocalfile.c:1145 #: ../gio/glocalfile.c:1158 msgid "Containing mount does not exist" msgstr "" #: ../gio/gfile.c:2515 ../gio/glocalfile.c:2376 msgid "Can't copy over directory" msgstr "" #: ../gio/gfile.c:2575 msgid "Can't copy directory over directory" msgstr "" #: ../gio/gfile.c:2583 ../gio/glocalfile.c:2385 msgid "Target file exists" msgstr "" #: ../gio/gfile.c:2602 msgid "Can't recursively copy directory" msgstr "" #: ../gio/gfile.c:2884 msgid "Splice not supported" msgstr "" #: ../gio/gfile.c:2888 #, c-format msgid "Error splicing file: %s" msgstr "" #: ../gio/gfile.c:3019 msgid "Copy (reflink/clone) between mounts is not supported" msgstr "" #: ../gio/gfile.c:3023 msgid "Copy (reflink/clone) is not supported or invalid" msgstr "" #: ../gio/gfile.c:3028 msgid "Copy (reflink/clone) is not supported or didn't work" msgstr "" #: ../gio/gfile.c:3091 msgid "Can't copy special file" msgstr "" #: ../gio/gfile.c:3884 msgid "Invalid symlink value given" msgstr "" #: ../gio/gfile.c:4045 msgid "Trash not supported" msgstr "" #: ../gio/gfile.c:4157 #, c-format msgid "File names cannot contain '%c'" msgstr "" #: ../gio/gfile.c:6586 ../gio/gvolume.c:363 msgid "volume doesn't implement mount" msgstr "" #: ../gio/gfile.c:6695 msgid "No application is registered as handling this file" msgstr "" #: ../gio/gfileenumerator.c:212 msgid "Enumerator is closed" msgstr "" #: ../gio/gfileenumerator.c:219 ../gio/gfileenumerator.c:278 #: ../gio/gfileenumerator.c:377 ../gio/gfileenumerator.c:476 msgid "File enumerator has outstanding operation" msgstr "" #: ../gio/gfileenumerator.c:368 ../gio/gfileenumerator.c:467 msgid "File enumerator is already closed" msgstr "" #: ../gio/gfileicon.c:236 #, c-format msgid "Can't handle version %d of GFileIcon encoding" msgstr "" #: ../gio/gfileicon.c:246 msgid "Malformed input data for GFileIcon" msgstr "" #: ../gio/gfileinputstream.c:149 ../gio/gfileinputstream.c:394 #: ../gio/gfileiostream.c:167 ../gio/gfileoutputstream.c:164 #: ../gio/gfileoutputstream.c:497 msgid "Stream doesn't support query_info" msgstr "" #: ../gio/gfileinputstream.c:325 ../gio/gfileiostream.c:379 #: ../gio/gfileoutputstream.c:371 msgid "Seek not supported on stream" msgstr "" #: ../gio/gfileinputstream.c:369 msgid "Truncate not allowed on input stream" msgstr "" #: ../gio/gfileiostream.c:455 ../gio/gfileoutputstream.c:447 msgid "Truncate not supported on stream" msgstr "" #: ../gio/ghttpproxy.c:136 msgid "Bad HTTP proxy reply" msgstr "" #: ../gio/ghttpproxy.c:152 msgid "HTTP proxy connection not allowed" msgstr "" #: ../gio/ghttpproxy.c:157 msgid "HTTP proxy authentication failed" msgstr "" #: ../gio/ghttpproxy.c:160 msgid "HTTP proxy authentication required" msgstr "" #: ../gio/ghttpproxy.c:164 #, c-format msgid "HTTP proxy connection failed: %i" msgstr "" #: ../gio/ghttpproxy.c:260 msgid "HTTP proxy server closed connection unexpectedly." msgstr "" #: ../gio/gicon.c:290 #, c-format msgid "Wrong number of tokens (%d)" msgstr "" #: ../gio/gicon.c:310 #, c-format msgid "No type for class name %s" msgstr "" #: ../gio/gicon.c:320 #, c-format msgid "Type %s does not implement the GIcon interface" msgstr "" #: ../gio/gicon.c:331 #, c-format msgid "Type %s is not classed" msgstr "" #: ../gio/gicon.c:345 #, c-format msgid "Malformed version number: %s" msgstr "" #: ../gio/gicon.c:359 #, c-format msgid "Type %s does not implement from_tokens() on the GIcon interface" msgstr "" #: ../gio/gicon.c:461 msgid "Can't handle the supplied version of the icon encoding" msgstr "" #: ../gio/ginetaddressmask.c:182 msgid "No address specified" msgstr "" #: ../gio/ginetaddressmask.c:190 #, c-format msgid "Length %u is too long for address" msgstr "" #: ../gio/ginetaddressmask.c:223 msgid "Address has bits set beyond prefix length" msgstr "" #: ../gio/ginetaddressmask.c:300 #, c-format msgid "Could not parse '%s' as IP address mask" msgstr "" #: ../gio/ginetsocketaddress.c:203 ../gio/ginetsocketaddress.c:220 #: ../gio/gnativesocketaddress.c:106 ../gio/gunixsocketaddress.c:216 msgid "Not enough space for socket address" msgstr "" #: ../gio/ginetsocketaddress.c:235 msgid "Unsupported socket address" msgstr "" #: ../gio/ginputstream.c:188 msgid "Input stream doesn't implement read" msgstr "" #. Translators: This is an error you get if there is already an #. * operation running against this stream when you try to start #. * one #. Translators: This is an error you get if there is #. * already an operation running against this stream when #. * you try to start one #: ../gio/ginputstream.c:1215 ../gio/giostream.c:310 #: ../gio/goutputstream.c:1668 msgid "Stream has outstanding operation" msgstr "" #: ../gio/glib-compile-resources.c:142 ../gio/glib-compile-schemas.c:1491 #, c-format msgid "Element <%s> not allowed inside <%s>" msgstr "" #: ../gio/glib-compile-resources.c:146 #, c-format msgid "Element <%s> not allowed at toplevel" msgstr "" #: ../gio/glib-compile-resources.c:236 #, c-format msgid "File %s appears multiple times in the resource" msgstr "" #: ../gio/glib-compile-resources.c:247 #, c-format msgid "Failed to locate '%s' in any source directory" msgstr "" #: ../gio/glib-compile-resources.c:258 #, c-format msgid "Failed to locate '%s' in current directory" msgstr "" #: ../gio/glib-compile-resources.c:287 #, c-format msgid "Unknown processing option \"%s\"" msgstr "" #: ../gio/glib-compile-resources.c:305 ../gio/glib-compile-resources.c:351 #, c-format msgid "Failed to create temp file: %s" msgstr "" #: ../gio/glib-compile-resources.c:379 #, c-format msgid "Error reading file %s: %s" msgstr "" #: ../gio/glib-compile-resources.c:399 #, c-format msgid "Error compressing file %s" msgstr "" #: ../gio/glib-compile-resources.c:467 ../gio/glib-compile-schemas.c:1603 #, c-format msgid "text may not appear inside <%s>" msgstr "" #: ../gio/glib-compile-resources.c:592 msgid "name of the output file" msgstr "" #: ../gio/glib-compile-resources.c:593 msgid "" "The directories where files are to be read from (default to current " "directory)" msgstr "" #: ../gio/glib-compile-resources.c:593 ../gio/glib-compile-schemas.c:2036 #: ../gio/glib-compile-schemas.c:2065 msgid "DIRECTORY" msgstr "" #: ../gio/glib-compile-resources.c:594 msgid "" "Generate output in the format selected for by the target filename extension" msgstr "" #: ../gio/glib-compile-resources.c:595 msgid "Generate source header" msgstr "" #: ../gio/glib-compile-resources.c:596 msgid "Generate sourcecode used to link in the resource file into your code" msgstr "" #: ../gio/glib-compile-resources.c:597 msgid "Generate dependency list" msgstr "" #: ../gio/glib-compile-resources.c:598 msgid "Don't automatically create and register resource" msgstr "" #: ../gio/glib-compile-resources.c:599 msgid "Don't export functions; declare them G_GNUC_INTERNAL" msgstr "" #: ../gio/glib-compile-resources.c:600 msgid "C identifier name used for the generated source code" msgstr "" #: ../gio/glib-compile-resources.c:626 msgid "" "Compile a resource specification into a resource file.\n" "Resource specification files have the extension .gresource.xml,\n" "and the resource file have the extension called .gresource." msgstr "" #: ../gio/glib-compile-resources.c:642 #, c-format msgid "You should give exactly one file name\n" msgstr "" #: ../gio/glib-compile-schemas.c:784 msgid "empty names are not permitted" msgstr "" #: ../gio/glib-compile-schemas.c:794 #, c-format msgid "invalid name '%s': names must begin with a lowercase letter" msgstr "" #: ../gio/glib-compile-schemas.c:806 #, c-format msgid "" "invalid name '%s': invalid character '%c'; only lowercase letters, numbers " "and hyphen ('-') are permitted." msgstr "" #: ../gio/glib-compile-schemas.c:815 #, c-format msgid "invalid name '%s': two successive hyphens ('--') are not permitted." msgstr "" #: ../gio/glib-compile-schemas.c:824 #, c-format msgid "invalid name '%s': the last character may not be a hyphen ('-')." msgstr "" #: ../gio/glib-compile-schemas.c:832 #, c-format msgid "invalid name '%s': maximum length is 1024" msgstr "" #: ../gio/glib-compile-schemas.c:901 #, c-format msgid " already specified" msgstr "" #: ../gio/glib-compile-schemas.c:927 msgid "cannot add keys to a 'list-of' schema" msgstr "" #: ../gio/glib-compile-schemas.c:938 #, c-format msgid " already specified" msgstr "" #: ../gio/glib-compile-schemas.c:956 #, c-format msgid "" " shadows in ; use " "to modify value" msgstr "" #: ../gio/glib-compile-schemas.c:967 #, c-format msgid "" "exactly one of 'type', 'enum' or 'flags' must be specified as an attribute " "to " msgstr "" #: ../gio/glib-compile-schemas.c:986 #, c-format msgid "<%s id='%s'> not (yet) defined." msgstr "" #: ../gio/glib-compile-schemas.c:1001 #, c-format msgid "invalid GVariant type string '%s'" msgstr "" #: ../gio/glib-compile-schemas.c:1031 msgid " given but schema isn't extending anything" msgstr "" #: ../gio/glib-compile-schemas.c:1044 #, c-format msgid "no to override" msgstr "" #: ../gio/glib-compile-schemas.c:1052 #, c-format msgid " already specified" msgstr "" #: ../gio/glib-compile-schemas.c:1125 #, c-format msgid " already specified" msgstr "" #: ../gio/glib-compile-schemas.c:1137 #, c-format msgid " extends not yet existing schema '%s'" msgstr "" #: ../gio/glib-compile-schemas.c:1153 #, c-format msgid " is list of not yet existing schema '%s'" msgstr "" #: ../gio/glib-compile-schemas.c:1161 #, c-format msgid "Can not be a list of a schema with a path" msgstr "" #: ../gio/glib-compile-schemas.c:1171 #, c-format msgid "Can not extend a schema with a path" msgstr "" #: ../gio/glib-compile-schemas.c:1181 #, c-format msgid "" " is a list, extending which is not a list" msgstr "" #: ../gio/glib-compile-schemas.c:1191 #, c-format msgid "" " extends but '%s' " "does not extend '%s'" msgstr "" #: ../gio/glib-compile-schemas.c:1208 #, c-format msgid "a path, if given, must begin and end with a slash" msgstr "" #: ../gio/glib-compile-schemas.c:1215 #, c-format msgid "the path of a list must end with ':/'" msgstr "" #: ../gio/glib-compile-schemas.c:1247 #, c-format msgid "<%s id='%s'> already specified" msgstr "" #: ../gio/glib-compile-schemas.c:1397 ../gio/glib-compile-schemas.c:1413 #, c-format msgid "Only one <%s> element allowed inside <%s>" msgstr "" #: ../gio/glib-compile-schemas.c:1495 #, c-format msgid "Element <%s> not allowed at the top level" msgstr "" #. Translators: Do not translate "--strict". #: ../gio/glib-compile-schemas.c:1794 ../gio/glib-compile-schemas.c:1865 #: ../gio/glib-compile-schemas.c:1941 #, c-format msgid "--strict was specified; exiting.\n" msgstr "" #: ../gio/glib-compile-schemas.c:1802 #, c-format msgid "This entire file has been ignored.\n" msgstr "" #: ../gio/glib-compile-schemas.c:1861 #, c-format msgid "Ignoring this file.\n" msgstr "" #: ../gio/glib-compile-schemas.c:1901 #, c-format msgid "No such key '%s' in schema '%s' as specified in override file '%s'" msgstr "" #: ../gio/glib-compile-schemas.c:1907 ../gio/glib-compile-schemas.c:1965 #: ../gio/glib-compile-schemas.c:1993 #, c-format msgid "; ignoring override for this key.\n" msgstr "" #: ../gio/glib-compile-schemas.c:1911 ../gio/glib-compile-schemas.c:1969 #: ../gio/glib-compile-schemas.c:1997 #, c-format msgid " and --strict was specified; exiting.\n" msgstr "" #: ../gio/glib-compile-schemas.c:1927 #, c-format msgid "" "error parsing key '%s' in schema '%s' as specified in override file '%s': %s." msgstr "" #: ../gio/glib-compile-schemas.c:1937 #, c-format msgid "Ignoring override for this key.\n" msgstr "" #: ../gio/glib-compile-schemas.c:1955 #, c-format msgid "" "override for key '%s' in schema '%s' in override file '%s' is outside the " "range given in the schema" msgstr "" #: ../gio/glib-compile-schemas.c:1983 #, c-format msgid "" "override for key '%s' in schema '%s' in override file '%s' is not in the " "list of valid choices" msgstr "" #: ../gio/glib-compile-schemas.c:2036 msgid "where to store the gschemas.compiled file" msgstr "" #: ../gio/glib-compile-schemas.c:2037 msgid "Abort on any errors in schemas" msgstr "" #: ../gio/glib-compile-schemas.c:2038 msgid "Do not write the gschema.compiled file" msgstr "" #: ../gio/glib-compile-schemas.c:2039 msgid "Do not enforce key name restrictions" msgstr "" #: ../gio/glib-compile-schemas.c:2068 msgid "" "Compile all GSettings schema files into a schema cache.\n" "Schema files are required to have the extension .gschema.xml,\n" "and the cache file is called gschemas.compiled." msgstr "" #: ../gio/glib-compile-schemas.c:2084 #, c-format msgid "You should give exactly one directory name\n" msgstr "" #: ../gio/glib-compile-schemas.c:2123 #, c-format msgid "No schema files found: " msgstr "" #: ../gio/glib-compile-schemas.c:2126 #, c-format msgid "doing nothing.\n" msgstr "" #: ../gio/glib-compile-schemas.c:2129 #, c-format msgid "removed existing output file.\n" msgstr "" #: ../gio/glocalfile.c:635 ../gio/win32/gwinhttpfile.c:420 #, c-format msgid "Invalid filename %s" msgstr "" #: ../gio/glocalfile.c:1012 #, c-format msgid "Error getting filesystem info: %s" msgstr "" #: ../gio/glocalfile.c:1180 msgid "Can't rename root directory" msgstr "" #: ../gio/glocalfile.c:1200 ../gio/glocalfile.c:1226 #, c-format msgid "Error renaming file: %s" msgstr "" #: ../gio/glocalfile.c:1209 msgid "Can't rename file, filename already exists" msgstr "" #: ../gio/glocalfile.c:1222 ../gio/glocalfile.c:2249 ../gio/glocalfile.c:2278 #: ../gio/glocalfile.c:2438 ../gio/glocalfileoutputstream.c:549 msgid "Invalid filename" msgstr "" #: ../gio/glocalfile.c:1389 ../gio/glocalfile.c:1413 msgid "Can't open directory" msgstr "" #: ../gio/glocalfile.c:1397 #, c-format msgid "Error opening file: %s" msgstr "" #: ../gio/glocalfile.c:1538 #, c-format msgid "Error removing file: %s" msgstr "" #: ../gio/glocalfile.c:1922 #, c-format msgid "Error trashing file: %s" msgstr "" #: ../gio/glocalfile.c:1945 #, c-format msgid "Unable to create trash dir %s: %s" msgstr "" #: ../gio/glocalfile.c:1966 msgid "Unable to find toplevel directory for trash" msgstr "" #: ../gio/glocalfile.c:2045 ../gio/glocalfile.c:2065 msgid "Unable to find or create trash directory" msgstr "" #: ../gio/glocalfile.c:2099 #, c-format msgid "Unable to create trashing info file: %s" msgstr "" #: ../gio/glocalfile.c:2157 ../gio/glocalfile.c:2162 ../gio/glocalfile.c:2219 #: ../gio/glocalfile.c:2226 #, c-format msgid "Unable to trash file: %s" msgstr "" #: ../gio/glocalfile.c:2227 ../glib/gregex.c:281 msgid "internal error" msgstr "" #: ../gio/glocalfile.c:2253 #, c-format msgid "Error creating directory: %s" msgstr "" #: ../gio/glocalfile.c:2282 #, c-format msgid "Filesystem does not support symbolic links" msgstr "" #: ../gio/glocalfile.c:2286 #, c-format msgid "Error making symbolic link: %s" msgstr "" #: ../gio/glocalfile.c:2348 ../gio/glocalfile.c:2442 #, c-format msgid "Error moving file: %s" msgstr "" #: ../gio/glocalfile.c:2371 msgid "Can't move directory over directory" msgstr "" #: ../gio/glocalfile.c:2398 ../gio/glocalfileoutputstream.c:925 #: ../gio/glocalfileoutputstream.c:939 ../gio/glocalfileoutputstream.c:954 #: ../gio/glocalfileoutputstream.c:970 ../gio/glocalfileoutputstream.c:984 msgid "Backup file creation failed" msgstr "" #: ../gio/glocalfile.c:2417 #, c-format msgid "Error removing target file: %s" msgstr "" #: ../gio/glocalfile.c:2431 msgid "Move between mounts not supported" msgstr "" #: ../gio/glocalfile.c:2623 #, c-format msgid "Could not determine the disk usage of %s: %s" msgstr "" #: ../gio/glocalfileinfo.c:721 msgid "Attribute value must be non-NULL" msgstr "" #: ../gio/glocalfileinfo.c:728 msgid "Invalid attribute type (string expected)" msgstr "" #: ../gio/glocalfileinfo.c:735 msgid "Invalid extended attribute name" msgstr "" #: ../gio/glocalfileinfo.c:775 #, c-format msgid "Error setting extended attribute '%s': %s" msgstr "" #: ../gio/glocalfileinfo.c:1575 msgid " (invalid encoding)" msgstr "" #: ../gio/glocalfileinfo.c:1766 ../gio/glocalfileoutputstream.c:803 #, c-format msgid "Error when getting information for file '%s': %s" msgstr "" #: ../gio/glocalfileinfo.c:2017 #, c-format msgid "Error when getting information for file descriptor: %s" msgstr "" #: ../gio/glocalfileinfo.c:2062 msgid "Invalid attribute type (uint32 expected)" msgstr "" #: ../gio/glocalfileinfo.c:2080 msgid "Invalid attribute type (uint64 expected)" msgstr "" #: ../gio/glocalfileinfo.c:2099 ../gio/glocalfileinfo.c:2118 msgid "Invalid attribute type (byte string expected)" msgstr "" #: ../gio/glocalfileinfo.c:2153 msgid "Cannot set permissions on symlinks" msgstr "" #: ../gio/glocalfileinfo.c:2169 #, c-format msgid "Error setting permissions: %s" msgstr "" #: ../gio/glocalfileinfo.c:2220 #, c-format msgid "Error setting owner: %s" msgstr "" #: ../gio/glocalfileinfo.c:2243 msgid "symlink must be non-NULL" msgstr "" #: ../gio/glocalfileinfo.c:2253 ../gio/glocalfileinfo.c:2272 #: ../gio/glocalfileinfo.c:2283 #, c-format msgid "Error setting symlink: %s" msgstr "" #: ../gio/glocalfileinfo.c:2262 msgid "Error setting symlink: file is not a symlink" msgstr "" #: ../gio/glocalfileinfo.c:2388 #, c-format msgid "Error setting modification or access time: %s" msgstr "" #: ../gio/glocalfileinfo.c:2411 msgid "SELinux context must be non-NULL" msgstr "" #: ../gio/glocalfileinfo.c:2426 #, c-format msgid "Error setting SELinux context: %s" msgstr "" #: ../gio/glocalfileinfo.c:2433 msgid "SELinux is not enabled on this system" msgstr "" #: ../gio/glocalfileinfo.c:2525 #, c-format msgid "Setting attribute %s not supported" msgstr "" #: ../gio/glocalfileinputstream.c:168 ../gio/glocalfileoutputstream.c:694 #, c-format msgid "Error reading from file: %s" msgstr "" #: ../gio/glocalfileinputstream.c:199 ../gio/glocalfileinputstream.c:211 #: ../gio/glocalfileinputstream.c:225 ../gio/glocalfileinputstream.c:333 #: ../gio/glocalfileoutputstream.c:456 ../gio/glocalfileoutputstream.c:1002 #, c-format msgid "Error seeking in file: %s" msgstr "" #: ../gio/glocalfileinputstream.c:255 ../gio/glocalfileoutputstream.c:246 #: ../gio/glocalfileoutputstream.c:340 #, c-format msgid "Error closing file: %s" msgstr "" #: ../gio/glocalfilemonitor.c:840 msgid "Unable to find default local file monitor type" msgstr "" #: ../gio/glocalfileoutputstream.c:194 ../gio/glocalfileoutputstream.c:226 #: ../gio/glocalfileoutputstream.c:715 #, c-format msgid "Error writing to file: %s" msgstr "" #: ../gio/glocalfileoutputstream.c:273 #, c-format msgid "Error removing old backup link: %s" msgstr "" #: ../gio/glocalfileoutputstream.c:287 ../gio/glocalfileoutputstream.c:300 #, c-format msgid "Error creating backup copy: %s" msgstr "" #: ../gio/glocalfileoutputstream.c:318 #, c-format msgid "Error renaming temporary file: %s" msgstr "" #: ../gio/glocalfileoutputstream.c:502 ../gio/glocalfileoutputstream.c:1053 #, c-format msgid "Error truncating file: %s" msgstr "" #: ../gio/glocalfileoutputstream.c:555 ../gio/glocalfileoutputstream.c:785 #: ../gio/glocalfileoutputstream.c:1034 ../gio/gsubprocess.c:360 #, c-format msgid "Error opening file '%s': %s" msgstr "" #: ../gio/glocalfileoutputstream.c:816 msgid "Target file is a directory" msgstr "" #: ../gio/glocalfileoutputstream.c:821 msgid "Target file is not a regular file" msgstr "" #: ../gio/glocalfileoutputstream.c:833 msgid "The file was externally modified" msgstr "" #: ../gio/glocalfileoutputstream.c:1018 #, c-format msgid "Error removing old file: %s" msgstr "" #: ../gio/gmemoryinputstream.c:471 ../gio/gmemoryoutputstream.c:771 msgid "Invalid GSeekType supplied" msgstr "" #: ../gio/gmemoryinputstream.c:481 msgid "Invalid seek request" msgstr "" #: ../gio/gmemoryinputstream.c:505 msgid "Cannot truncate GMemoryInputStream" msgstr "" #: ../gio/gmemoryoutputstream.c:567 msgid "Memory output stream not resizable" msgstr "" #: ../gio/gmemoryoutputstream.c:583 msgid "Failed to resize memory output stream" msgstr "" #: ../gio/gmemoryoutputstream.c:673 msgid "" "Amount of memory required to process the write is larger than available " "address space" msgstr "" #: ../gio/gmemoryoutputstream.c:781 msgid "Requested seek before the beginning of the stream" msgstr "" #: ../gio/gmemoryoutputstream.c:796 msgid "Requested seek beyond the end of the stream" msgstr "" #. Translators: This is an error #. * message for mount objects that #. * don't implement unmount. #: ../gio/gmount.c:393 msgid "mount doesn't implement \"unmount\"" msgstr "" #. Translators: This is an error #. * message for mount objects that #. * don't implement eject. #: ../gio/gmount.c:469 msgid "mount doesn't implement \"eject\"" msgstr "" #. Translators: This is an error #. * message for mount objects that #. * don't implement any of unmount or unmount_with_operation. #: ../gio/gmount.c:547 msgid "mount doesn't implement \"unmount\" or \"unmount_with_operation\"" msgstr "" #. Translators: This is an error #. * message for mount objects that #. * don't implement any of eject or eject_with_operation. #: ../gio/gmount.c:632 msgid "mount doesn't implement \"eject\" or \"eject_with_operation\"" msgstr "" #. Translators: This is an error #. * message for mount objects that #. * don't implement remount. #: ../gio/gmount.c:720 msgid "mount doesn't implement \"remount\"" msgstr "" #. Translators: This is an error #. * message for mount objects that #. * don't implement content type guessing. #: ../gio/gmount.c:802 msgid "mount doesn't implement content type guessing" msgstr "" #. Translators: This is an error #. * message for mount objects that #. * don't implement content type guessing. #: ../gio/gmount.c:889 msgid "mount doesn't implement synchronous content type guessing" msgstr "" #: ../gio/gnetworkaddress.c:378 #, c-format msgid "Hostname '%s' contains '[' but not ']'" msgstr "" #: ../gio/gnetworkmonitorbase.c:206 ../gio/gnetworkmonitorbase.c:309 msgid "Network unreachable" msgstr "" #: ../gio/gnetworkmonitorbase.c:244 ../gio/gnetworkmonitorbase.c:274 msgid "Host unreachable" msgstr "" #: ../gio/gnetworkmonitornetlink.c:96 ../gio/gnetworkmonitornetlink.c:108 #: ../gio/gnetworkmonitornetlink.c:127 #, c-format msgid "Could not create network monitor: %s" msgstr "" #: ../gio/gnetworkmonitornetlink.c:117 msgid "Could not create network monitor: " msgstr "" #: ../gio/gnetworkmonitornetlink.c:175 msgid "Could not get network status: " msgstr "" #: ../gio/gnetworkmonitornm.c:326 #, c-format msgid "NetworkManager version too old" msgstr "" #: ../gio/goutputstream.c:212 ../gio/goutputstream.c:560 msgid "Output stream doesn't implement write" msgstr "" #: ../gio/goutputstream.c:521 ../gio/goutputstream.c:1222 msgid "Source stream is already closed" msgstr "" #: ../gio/gresolver.c:330 ../gio/gthreadedresolver.c:116 #: ../gio/gthreadedresolver.c:126 #, c-format msgid "Error resolving '%s': %s" msgstr "" #: ../gio/gresource.c:304 ../gio/gresource.c:555 ../gio/gresource.c:572 #: ../gio/gresource.c:693 ../gio/gresource.c:762 ../gio/gresource.c:823 #: ../gio/gresource.c:903 ../gio/gresourcefile.c:453 ../gio/gresourcefile.c:576 #: ../gio/gresourcefile.c:713 #, c-format msgid "The resource at '%s' does not exist" msgstr "" #: ../gio/gresource.c:469 #, c-format msgid "The resource at '%s' failed to decompress" msgstr "" #: ../gio/gresourcefile.c:709 #, c-format msgid "The resource at '%s' is not a directory" msgstr "" #: ../gio/gresourcefile.c:917 msgid "Input stream doesn't implement seek" msgstr "" #: ../gio/gresource-tool.c:494 msgid "List sections containing resources in an elf FILE" msgstr "" #: ../gio/gresource-tool.c:500 msgid "" "List resources\n" "If SECTION is given, only list resources in this section\n" "If PATH is given, only list matching resources" msgstr "" #: ../gio/gresource-tool.c:503 ../gio/gresource-tool.c:513 msgid "FILE [PATH]" msgstr "" #: ../gio/gresource-tool.c:504 ../gio/gresource-tool.c:514 #: ../gio/gresource-tool.c:521 msgid "SECTION" msgstr "" #: ../gio/gresource-tool.c:509 msgid "" "List resources with details\n" "If SECTION is given, only list resources in this section\n" "If PATH is given, only list matching resources\n" "Details include the section, size and compression" msgstr "" #: ../gio/gresource-tool.c:519 msgid "Extract a resource file to stdout" msgstr "" #: ../gio/gresource-tool.c:520 msgid "FILE PATH" msgstr "" #: ../gio/gresource-tool.c:534 msgid "" "Usage:\n" " gresource [--section SECTION] COMMAND [ARGS...]\n" "\n" "Commands:\n" " help Show this information\n" " sections List resource sections\n" " list List resources\n" " details List resources with details\n" " extract Extract a resource\n" "\n" "Use 'gresource help COMMAND' to get detailed help.\n" "\n" msgstr "" #: ../gio/gresource-tool.c:548 #, c-format msgid "" "Usage:\n" " gresource %s%s%s %s\n" "\n" "%s\n" "\n" msgstr "" #: ../gio/gresource-tool.c:555 msgid " SECTION An (optional) elf section name\n" msgstr "" #: ../gio/gresource-tool.c:559 ../gio/gsettings-tool.c:639 msgid " COMMAND The (optional) command to explain\n" msgstr "" #: ../gio/gresource-tool.c:565 msgid " FILE An elf file (a binary or a shared library)\n" msgstr "" #: ../gio/gresource-tool.c:568 msgid "" " FILE An elf file (a binary or a shared library)\n" " or a compiled resource file\n" msgstr "" #: ../gio/gresource-tool.c:572 msgid "[PATH]" msgstr "" #: ../gio/gresource-tool.c:574 msgid " PATH An (optional) resource path (may be partial)\n" msgstr "" #: ../gio/gresource-tool.c:575 msgid "PATH" msgstr "" #: ../gio/gresource-tool.c:577 msgid " PATH A resource path\n" msgstr "" #: ../gio/gsettings-tool.c:51 ../gio/gsettings-tool.c:72 #: ../gio/gsettings-tool.c:830 #, c-format msgid "No such schema '%s'\n" msgstr "" #: ../gio/gsettings-tool.c:57 #, c-format msgid "Schema '%s' is not relocatable (path must not be specified)\n" msgstr "" #: ../gio/gsettings-tool.c:78 #, c-format msgid "Schema '%s' is relocatable (path must be specified)\n" msgstr "" #: ../gio/gsettings-tool.c:92 #, c-format msgid "Empty path given.\n" msgstr "" #: ../gio/gsettings-tool.c:98 #, c-format msgid "Path must begin with a slash (/)\n" msgstr "" #: ../gio/gsettings-tool.c:104 #, c-format msgid "Path must end with a slash (/)\n" msgstr "" #: ../gio/gsettings-tool.c:110 #, c-format msgid "Path must not contain two adjacent slashes (//)\n" msgstr "" #: ../gio/gsettings-tool.c:481 #, c-format msgid "The provided value is outside of the valid range\n" msgstr "" #: ../gio/gsettings-tool.c:488 #, c-format msgid "The key is not writable\n" msgstr "" #: ../gio/gsettings-tool.c:524 msgid "List the installed (non-relocatable) schemas" msgstr "" #: ../gio/gsettings-tool.c:530 msgid "List the installed relocatable schemas" msgstr "" #: ../gio/gsettings-tool.c:536 msgid "List the keys in SCHEMA" msgstr "" #: ../gio/gsettings-tool.c:537 ../gio/gsettings-tool.c:543 #: ../gio/gsettings-tool.c:580 msgid "SCHEMA[:PATH]" msgstr "" #: ../gio/gsettings-tool.c:542 msgid "List the children of SCHEMA" msgstr "" #: ../gio/gsettings-tool.c:548 msgid "" "List keys and values, recursively\n" "If no SCHEMA is given, list all keys\n" msgstr "" #: ../gio/gsettings-tool.c:550 msgid "[SCHEMA[:PATH]]" msgstr "" #: ../gio/gsettings-tool.c:555 msgid "Get the value of KEY" msgstr "" #: ../gio/gsettings-tool.c:556 ../gio/gsettings-tool.c:562 #: ../gio/gsettings-tool.c:574 ../gio/gsettings-tool.c:586 msgid "SCHEMA[:PATH] KEY" msgstr "" #: ../gio/gsettings-tool.c:561 msgid "Query the range of valid values for KEY" msgstr "" #: ../gio/gsettings-tool.c:567 msgid "Set the value of KEY to VALUE" msgstr "" #: ../gio/gsettings-tool.c:568 msgid "SCHEMA[:PATH] KEY VALUE" msgstr "" #: ../gio/gsettings-tool.c:573 msgid "Reset KEY to its default value" msgstr "" #: ../gio/gsettings-tool.c:579 msgid "Reset all keys in SCHEMA to their defaults" msgstr "" #: ../gio/gsettings-tool.c:585 msgid "Check if KEY is writable" msgstr "" #: ../gio/gsettings-tool.c:591 msgid "" "Monitor KEY for changes.\n" "If no KEY is specified, monitor all keys in SCHEMA.\n" "Use ^C to stop monitoring.\n" msgstr "" #: ../gio/gsettings-tool.c:594 msgid "SCHEMA[:PATH] [KEY]" msgstr "" #: ../gio/gsettings-tool.c:606 msgid "" "Usage:\n" " gsettings --version\n" " gsettings [--schemadir SCHEMADIR] COMMAND [ARGS...]\n" "\n" "Commands:\n" " help Show this information\n" " list-schemas List installed schemas\n" " list-relocatable-schemas List relocatable schemas\n" " list-keys List keys in a schema\n" " list-children List children of a schema\n" " list-recursively List keys and values, recursively\n" " range Queries the range of a key\n" " get Get the value of a key\n" " set Set the value of a key\n" " reset Reset the value of a key\n" " reset-recursively Reset all values in a given schema\n" " writable Check if a key is writable\n" " monitor Watch for changes\n" "\n" "Use 'gsettings help COMMAND' to get detailed help.\n" "\n" msgstr "" #: ../gio/gsettings-tool.c:629 #, c-format msgid "" "Usage:\n" " gsettings [--schemadir SCHEMADIR] %s %s\n" "\n" "%s\n" "\n" msgstr "" #: ../gio/gsettings-tool.c:635 msgid " SCHEMADIR A directory to search for additional schemas\n" msgstr "" #: ../gio/gsettings-tool.c:643 msgid "" " SCHEMA The name of the schema\n" " PATH The path, for relocatable schemas\n" msgstr "" #: ../gio/gsettings-tool.c:648 msgid " KEY The (optional) key within the schema\n" msgstr "" #: ../gio/gsettings-tool.c:652 msgid " KEY The key within the schema\n" msgstr "" #: ../gio/gsettings-tool.c:656 msgid " VALUE The value to set\n" msgstr "" #: ../gio/gsettings-tool.c:711 #, c-format msgid "Could not load schemas from %s: %s\n" msgstr "" #: ../gio/gsettings-tool.c:723 #, c-format msgid "No schemas installed\n" msgstr "" #: ../gio/gsettings-tool.c:788 #, c-format msgid "Empty schema name given\n" msgstr "" #: ../gio/gsettings-tool.c:843 #, c-format msgid "No such key '%s'\n" msgstr "" #: ../gio/gsocket.c:364 msgid "Invalid socket, not initialized" msgstr "" #: ../gio/gsocket.c:371 #, c-format msgid "Invalid socket, initialization failed due to: %s" msgstr "" #: ../gio/gsocket.c:379 msgid "Socket is already closed" msgstr "" #: ../gio/gsocket.c:394 ../gio/gsocket.c:2751 ../gio/gsocket.c:3896 #: ../gio/gsocket.c:3951 msgid "Socket I/O timed out" msgstr "" #: ../gio/gsocket.c:526 #, c-format msgid "creating GSocket from fd: %s" msgstr "" #: ../gio/gsocket.c:554 ../gio/gsocket.c:608 ../gio/gsocket.c:615 #, c-format msgid "Unable to create socket: %s" msgstr "" #: ../gio/gsocket.c:608 msgid "Unknown family was specified" msgstr "" #: ../gio/gsocket.c:615 msgid "Unknown protocol was specified" msgstr "" #: ../gio/gsocket.c:1104 #, c-format msgid "Cannot use datagram operations on a non-datagram socket." msgstr "" #: ../gio/gsocket.c:1121 #, c-format msgid "Cannot use datagram operations on a socket with a timeout set." msgstr "" #: ../gio/gsocket.c:1925 #, c-format msgid "could not get local address: %s" msgstr "" #: ../gio/gsocket.c:1968 #, c-format msgid "could not get remote address: %s" msgstr "" #: ../gio/gsocket.c:2034 #, c-format msgid "could not listen: %s" msgstr "" #: ../gio/gsocket.c:2133 #, c-format msgid "Error binding to address: %s" msgstr "" #: ../gio/gsocket.c:2248 ../gio/gsocket.c:2285 #, c-format msgid "Error joining multicast group: %s" msgstr "" #: ../gio/gsocket.c:2249 ../gio/gsocket.c:2286 #, c-format msgid "Error leaving multicast group: %s" msgstr "" #: ../gio/gsocket.c:2250 msgid "No support for source-specific multicast" msgstr "" #: ../gio/gsocket.c:2470 #, c-format msgid "Error accepting connection: %s" msgstr "" #: ../gio/gsocket.c:2593 msgid "Connection in progress" msgstr "" #: ../gio/gsocket.c:2644 msgid "Unable to get pending error: " msgstr "" #: ../gio/gsocket.c:2816 #, c-format msgid "Error receiving data: %s" msgstr "" #: ../gio/gsocket.c:3013 #, c-format msgid "Error sending data: %s" msgstr "" #: ../gio/gsocket.c:3200 #, c-format msgid "Unable to shutdown socket: %s" msgstr "" #: ../gio/gsocket.c:3281 #, c-format msgid "Error closing socket: %s" msgstr "" #: ../gio/gsocket.c:3889 #, c-format msgid "Waiting for socket condition: %s" msgstr "" #: ../gio/gsocket.c:4361 ../gio/gsocket.c:4441 ../gio/gsocket.c:4619 #, c-format msgid "Error sending message: %s" msgstr "" #: ../gio/gsocket.c:4385 msgid "GSocketControlMessage not supported on Windows" msgstr "" #: ../gio/gsocket.c:4840 ../gio/gsocket.c:4913 ../gio/gsocket.c:5140 #, c-format msgid "Error receiving message: %s" msgstr "" #: ../gio/gsocket.c:5412 #, c-format msgid "Unable to read socket credentials: %s" msgstr "" #: ../gio/gsocket.c:5421 msgid "g_socket_get_credentials not implemented for this OS" msgstr "" #: ../gio/gsocketclient.c:176 #, c-format msgid "Could not connect to proxy server %s: " msgstr "" #: ../gio/gsocketclient.c:190 #, c-format msgid "Could not connect to %s: " msgstr "" #: ../gio/gsocketclient.c:192 msgid "Could not connect: " msgstr "" #: ../gio/gsocketclient.c:1027 ../gio/gsocketclient.c:1599 msgid "Unknown error on connect" msgstr "" #: ../gio/gsocketclient.c:1081 ../gio/gsocketclient.c:1535 msgid "Proxying over a non-TCP connection is not supported." msgstr "" #: ../gio/gsocketclient.c:1110 ../gio/gsocketclient.c:1561 #, c-format msgid "Proxy protocol '%s' is not supported." msgstr "" #: ../gio/gsocketlistener.c:218 msgid "Listener is already closed" msgstr "" #: ../gio/gsocketlistener.c:264 msgid "Added socket is closed" msgstr "" #: ../gio/gsocks4aproxy.c:118 #, c-format msgid "SOCKSv4 does not support IPv6 address '%s'" msgstr "" #: ../gio/gsocks4aproxy.c:136 msgid "Username is too long for SOCKSv4 protocol" msgstr "" #: ../gio/gsocks4aproxy.c:153 #, c-format msgid "Hostname '%s' is too long for SOCKSv4 protocol" msgstr "" #: ../gio/gsocks4aproxy.c:179 msgid "The server is not a SOCKSv4 proxy server." msgstr "" #: ../gio/gsocks4aproxy.c:186 msgid "Connection through SOCKSv4 server was rejected" msgstr "" #: ../gio/gsocks5proxy.c:153 ../gio/gsocks5proxy.c:324 #: ../gio/gsocks5proxy.c:334 msgid "The server is not a SOCKSv5 proxy server." msgstr "" #: ../gio/gsocks5proxy.c:167 msgid "The SOCKSv5 proxy requires authentication." msgstr "" #: ../gio/gsocks5proxy.c:177 msgid "" "The SOCKSv5 proxy requires an authentication method that is not supported by " "GLib." msgstr "" #: ../gio/gsocks5proxy.c:206 msgid "Username or password is too long for SOCKSv5 protocol." msgstr "" #: ../gio/gsocks5proxy.c:236 msgid "SOCKSv5 authentication failed due to wrong username or password." msgstr "" #: ../gio/gsocks5proxy.c:286 #, c-format msgid "Hostname '%s' is too long for SOCKSv5 protocol" msgstr "" #: ../gio/gsocks5proxy.c:348 msgid "The SOCKSv5 proxy server uses unknown address type." msgstr "" #: ../gio/gsocks5proxy.c:355 msgid "Internal SOCKSv5 proxy server error." msgstr "" #: ../gio/gsocks5proxy.c:361 msgid "SOCKSv5 connection not allowed by ruleset." msgstr "" #: ../gio/gsocks5proxy.c:368 msgid "Host unreachable through SOCKSv5 server." msgstr "" #: ../gio/gsocks5proxy.c:374 msgid "Network unreachable through SOCKSv5 proxy." msgstr "" #: ../gio/gsocks5proxy.c:380 msgid "Connection refused through SOCKSv5 proxy." msgstr "" #: ../gio/gsocks5proxy.c:386 msgid "SOCKSv5 proxy does not support 'connect' command." msgstr "" #: ../gio/gsocks5proxy.c:392 msgid "SOCKSv5 proxy does not support provided address type." msgstr "" #: ../gio/gsocks5proxy.c:398 msgid "Unknown SOCKSv5 proxy error." msgstr "" #: ../gio/gthemedicon.c:518 #, c-format msgid "Can't handle version %d of GThemedIcon encoding" msgstr "" #: ../gio/gthreadedresolver.c:118 msgid "No valid addresses were found" msgstr "" #: ../gio/gthreadedresolver.c:211 #, c-format msgid "Error reverse-resolving '%s': %s" msgstr "" #: ../gio/gthreadedresolver.c:546 ../gio/gthreadedresolver.c:626 #: ../gio/gthreadedresolver.c:724 ../gio/gthreadedresolver.c:774 #, c-format msgid "No DNS record of the requested type for '%s'" msgstr "" #: ../gio/gthreadedresolver.c:551 ../gio/gthreadedresolver.c:729 #, c-format msgid "Temporarily unable to resolve '%s'" msgstr "" #: ../gio/gthreadedresolver.c:556 ../gio/gthreadedresolver.c:734 #, c-format msgid "Error resolving '%s'" msgstr "" #: ../gio/gtlscertificate.c:250 msgid "Cannot decrypt PEM-encoded private key" msgstr "" #: ../gio/gtlscertificate.c:255 msgid "No PEM-encoded private key found" msgstr "" #: ../gio/gtlscertificate.c:265 msgid "Could not parse PEM-encoded private key" msgstr "" #: ../gio/gtlscertificate.c:290 msgid "No PEM-encoded certificate found" msgstr "" #: ../gio/gtlscertificate.c:299 msgid "Could not parse PEM-encoded certificate" msgstr "" #: ../gio/gtlspassword.c:111 msgid "" "This is the last chance to enter the password correctly before your access " "is locked out." msgstr "" #: ../gio/gtlspassword.c:113 msgid "" "Several password entered have been incorrect, and your access will be locked " "out after further failures." msgstr "" #: ../gio/gtlspassword.c:115 msgid "The password entered is incorrect." msgstr "" #: ../gio/gunixconnection.c:166 ../gio/gunixconnection.c:561 #, c-format msgid "Expecting 1 control message, got %d" msgid_plural "Expecting 1 control message, got %d" msgstr[0] "" msgstr[1] "" #: ../gio/gunixconnection.c:182 ../gio/gunixconnection.c:573 msgid "Unexpected type of ancillary data" msgstr "" #: ../gio/gunixconnection.c:200 #, c-format msgid "Expecting one fd, but got %d\n" msgid_plural "Expecting one fd, but got %d\n" msgstr[0] "" msgstr[1] "" #: ../gio/gunixconnection.c:219 msgid "Received invalid fd" msgstr "" #: ../gio/gunixconnection.c:355 msgid "Error sending credentials: " msgstr "" #: ../gio/gunixconnection.c:503 #, c-format msgid "Error checking if SO_PASSCRED is enabled for socket: %s" msgstr "" #: ../gio/gunixconnection.c:518 #, c-format msgid "Error enabling SO_PASSCRED: %s" msgstr "" #: ../gio/gunixconnection.c:547 msgid "" "Expecting to read a single byte for receiving credentials but read zero bytes" msgstr "" #: ../gio/gunixconnection.c:587 #, c-format msgid "Not expecting control message, but got %d" msgstr "" #: ../gio/gunixconnection.c:611 #, c-format msgid "Error while disabling SO_PASSCRED: %s" msgstr "" #: ../gio/gunixinputstream.c:369 ../gio/gunixinputstream.c:390 #, c-format msgid "Error reading from file descriptor: %s" msgstr "" #: ../gio/gunixinputstream.c:423 ../gio/gunixoutputstream.c:409 #: ../gio/gwin32inputstream.c:217 ../gio/gwin32outputstream.c:204 #, c-format msgid "Error closing file descriptor: %s" msgstr "" #: ../gio/gunixmounts.c:2099 ../gio/gunixmounts.c:2152 msgid "Filesystem root" msgstr "" #: ../gio/gunixoutputstream.c:355 ../gio/gunixoutputstream.c:376 #, c-format msgid "Error writing to file descriptor: %s" msgstr "" #: ../gio/gunixsocketaddress.c:239 msgid "Abstract UNIX domain socket addresses not supported on this system" msgstr "" #: ../gio/gvolume.c:437 msgid "volume doesn't implement eject" msgstr "" #. Translators: This is an error #. * message for volume objects that #. * don't implement any of eject or eject_with_operation. #: ../gio/gvolume.c:514 msgid "volume doesn't implement eject or eject_with_operation" msgstr "" #: ../gio/gwin32inputstream.c:185 #, c-format msgid "Error reading from handle: %s" msgstr "" #: ../gio/gwin32inputstream.c:232 ../gio/gwin32outputstream.c:219 #, c-format msgid "Error closing handle: %s" msgstr "" #: ../gio/gwin32outputstream.c:172 #, c-format msgid "Error writing to handle: %s" msgstr "" #: ../gio/gzlibcompressor.c:394 ../gio/gzlibdecompressor.c:347 msgid "Not enough memory" msgstr "" #: ../gio/gzlibcompressor.c:401 ../gio/gzlibdecompressor.c:354 #, c-format msgid "Internal error: %s" msgstr "" #: ../gio/gzlibcompressor.c:414 ../gio/gzlibdecompressor.c:368 msgid "Need more input" msgstr "" #: ../gio/gzlibdecompressor.c:340 msgid "Invalid compressed data" msgstr "" #: ../gio/tests/gdbus-daemon.c:18 msgid "Address to listen on" msgstr "" #: ../gio/tests/gdbus-daemon.c:19 msgid "Ignored, for compat with GTestDbus" msgstr "" #: ../gio/tests/gdbus-daemon.c:20 msgid "Print address" msgstr "" #: ../gio/tests/gdbus-daemon.c:21 msgid "Print address in shell mode" msgstr "" #: ../gio/tests/gdbus-daemon.c:28 msgid "Run a dbus service" msgstr "" #: ../gio/tests/gdbus-daemon.c:42 #, c-format msgid "Wrong args\n" msgstr "" #: ../glib/gbookmarkfile.c:755 #, c-format msgid "Unexpected attribute '%s' for element '%s'" msgstr "" #: ../glib/gbookmarkfile.c:766 ../glib/gbookmarkfile.c:837 #: ../glib/gbookmarkfile.c:847 ../glib/gbookmarkfile.c:954 #, c-format msgid "Attribute '%s' of element '%s' not found" msgstr "" #: ../glib/gbookmarkfile.c:1124 ../glib/gbookmarkfile.c:1189 #: ../glib/gbookmarkfile.c:1253 ../glib/gbookmarkfile.c:1263 #, c-format msgid "Unexpected tag '%s', tag '%s' expected" msgstr "" #: ../glib/gbookmarkfile.c:1149 ../glib/gbookmarkfile.c:1163 #: ../glib/gbookmarkfile.c:1231 #, c-format msgid "Unexpected tag '%s' inside '%s'" msgstr "" #: ../glib/gbookmarkfile.c:1756 msgid "No valid bookmark file found in data dirs" msgstr "" #: ../glib/gbookmarkfile.c:1957 #, c-format msgid "A bookmark for URI '%s' already exists" msgstr "" #: ../glib/gbookmarkfile.c:2003 ../glib/gbookmarkfile.c:2161 #: ../glib/gbookmarkfile.c:2246 ../glib/gbookmarkfile.c:2326 #: ../glib/gbookmarkfile.c:2411 ../glib/gbookmarkfile.c:2494 #: ../glib/gbookmarkfile.c:2572 ../glib/gbookmarkfile.c:2651 #: ../glib/gbookmarkfile.c:2693 ../glib/gbookmarkfile.c:2790 #: ../glib/gbookmarkfile.c:2910 ../glib/gbookmarkfile.c:3100 #: ../glib/gbookmarkfile.c:3176 ../glib/gbookmarkfile.c:3344 #: ../glib/gbookmarkfile.c:3433 ../glib/gbookmarkfile.c:3522 #: ../glib/gbookmarkfile.c:3638 #, c-format msgid "No bookmark found for URI '%s'" msgstr "" #: ../glib/gbookmarkfile.c:2335 #, c-format msgid "No MIME type defined in the bookmark for URI '%s'" msgstr "" #: ../glib/gbookmarkfile.c:2420 #, c-format msgid "No private flag has been defined in bookmark for URI '%s'" msgstr "" #: ../glib/gbookmarkfile.c:2799 #, c-format msgid "No groups set in bookmark for URI '%s'" msgstr "" #: ../glib/gbookmarkfile.c:3197 ../glib/gbookmarkfile.c:3354 #, c-format msgid "No application with name '%s' registered a bookmark for '%s'" msgstr "" #: ../glib/gbookmarkfile.c:3377 #, c-format msgid "Failed to expand exec line '%s' with URI '%s'" msgstr "" #: ../glib/gconvert.c:477 ../glib/gutf8.c:849 ../glib/gutf8.c:1061 #: ../glib/gutf8.c:1198 ../glib/gutf8.c:1302 msgid "Partial character sequence at end of input" msgstr "Djelomična znakovna sekvenca pri kraju izlaza" #: ../glib/gconvert.c:742 #, c-format msgid "Cannot convert fallback '%s' to codeset '%s'" msgstr "Ne mogu prevesti '%s' u znakovni skup '%s'" #: ../glib/gconvert.c:1567 #, c-format msgid "The URI '%s' is not an absolute URI using the \"file\" scheme" msgstr "'%s' nije apsolutni URI sa \"datoteka\" shemom" #: ../glib/gconvert.c:1577 #, c-format msgid "The local file URI '%s' may not include a '#'" msgstr "URI lokalne datoteke '%s' ne smije uključivati '#'" #: ../glib/gconvert.c:1594 #, c-format msgid "The URI '%s' is invalid" msgstr "URI '%s' nije ispravan" #: ../glib/gconvert.c:1606 #, c-format msgid "The hostname of the URI '%s' is invalid" msgstr "Ime računala URI-ja '%s' je neispravno" #: ../glib/gconvert.c:1622 #, c-format msgid "The URI '%s' contains invalidly escaped characters" msgstr "URI '%s' sadrži neispravne escape znakove" #: ../glib/gconvert.c:1717 #, c-format msgid "The pathname '%s' is not an absolute path" msgstr "Putanja '%s' nije apsolutna putanja" #: ../glib/gconvert.c:1727 msgid "Invalid hostname" msgstr "Neispravno ime računala" #. Translators: 'before midday' indicator #: ../glib/gdatetime.c:201 msgctxt "GDateTime" msgid "AM" msgstr "" #. Translators: 'after midday' indicator #: ../glib/gdatetime.c:203 msgctxt "GDateTime" msgid "PM" msgstr "" #. Translators: this is the preferred format for expressing the date and the time #: ../glib/gdatetime.c:206 msgctxt "GDateTime" msgid "%a %b %e %H:%M:%S %Y" msgstr "%a %d %b %Y %T" #. Translators: this is the preferred format for expressing the date #: ../glib/gdatetime.c:209 msgctxt "GDateTime" msgid "%m/%d/%y" msgstr "%d.%m.%Y" #. Translators: this is the preferred format for expressing the time #: ../glib/gdatetime.c:212 msgctxt "GDateTime" msgid "%H:%M:%S" msgstr "%T" #. Translators: this is the preferred format for expressing 12 hour time #: ../glib/gdatetime.c:215 msgctxt "GDateTime" msgid "%I:%M:%S %p" msgstr "" #: ../glib/gdatetime.c:228 msgctxt "full month name" msgid "January" msgstr "Siječanj" #: ../glib/gdatetime.c:230 msgctxt "full month name" msgid "February" msgstr "Veljača" #: ../glib/gdatetime.c:232 msgctxt "full month name" msgid "March" msgstr "Ožujak" #: ../glib/gdatetime.c:234 msgctxt "full month name" msgid "April" msgstr "Travanj" #: ../glib/gdatetime.c:236 msgctxt "full month name" msgid "May" msgstr "Svibanj" #: ../glib/gdatetime.c:238 msgctxt "full month name" msgid "June" msgstr "Lipanj" #: ../glib/gdatetime.c:240 msgctxt "full month name" msgid "July" msgstr "Srpanj" #: ../glib/gdatetime.c:242 msgctxt "full month name" msgid "August" msgstr "" #: ../glib/gdatetime.c:244 msgctxt "full month name" msgid "September" msgstr "" #: ../glib/gdatetime.c:246 msgctxt "full month name" msgid "October" msgstr "" #: ../glib/gdatetime.c:248 msgctxt "full month name" msgid "November" msgstr "" #: ../glib/gdatetime.c:250 msgctxt "full month name" msgid "December" msgstr "" #: ../glib/gdatetime.c:265 msgctxt "abbreviated month name" msgid "Jan" msgstr "Sij" #: ../glib/gdatetime.c:267 msgctxt "abbreviated month name" msgid "Feb" msgstr "Vel" #: ../glib/gdatetime.c:269 msgctxt "abbreviated month name" msgid "Mar" msgstr "Ožu" #: ../glib/gdatetime.c:271 msgctxt "abbreviated month name" msgid "Apr" msgstr "Tra" #: ../glib/gdatetime.c:273 msgctxt "abbreviated month name" msgid "May" msgstr "Svi" #: ../glib/gdatetime.c:275 msgctxt "abbreviated month name" msgid "Jun" msgstr "Lip" #: ../glib/gdatetime.c:277 msgctxt "abbreviated month name" msgid "Jul" msgstr "Srp" #: ../glib/gdatetime.c:279 msgctxt "abbreviated month name" msgid "Aug" msgstr "" #: ../glib/gdatetime.c:281 msgctxt "abbreviated month name" msgid "Sep" msgstr "" #: ../glib/gdatetime.c:283 msgctxt "abbreviated month name" msgid "Oct" msgstr "" #: ../glib/gdatetime.c:285 msgctxt "abbreviated month name" msgid "Nov" msgstr "" #: ../glib/gdatetime.c:287 msgctxt "abbreviated month name" msgid "Dec" msgstr "" #: ../glib/gdatetime.c:302 msgctxt "full weekday name" msgid "Monday" msgstr "Ponedjeljak" #: ../glib/gdatetime.c:304 msgctxt "full weekday name" msgid "Tuesday" msgstr "Utorak" #: ../glib/gdatetime.c:306 msgctxt "full weekday name" msgid "Wednesday" msgstr "Srijeda" #: ../glib/gdatetime.c:308 msgctxt "full weekday name" msgid "Thursday" msgstr "Četvrtak" #: ../glib/gdatetime.c:310 msgctxt "full weekday name" msgid "Friday" msgstr "Petak" #: ../glib/gdatetime.c:312 msgctxt "full weekday name" msgid "Saturday" msgstr "Subota" #: ../glib/gdatetime.c:314 msgctxt "full weekday name" msgid "Sunday" msgstr "Nedjelja" #: ../glib/gdatetime.c:329 msgctxt "abbreviated weekday name" msgid "Mon" msgstr "Pon" #: ../glib/gdatetime.c:331 msgctxt "abbreviated weekday name" msgid "Tue" msgstr "Uto" #: ../glib/gdatetime.c:333 msgctxt "abbreviated weekday name" msgid "Wed" msgstr "Sri" #: ../glib/gdatetime.c:335 msgctxt "abbreviated weekday name" msgid "Thu" msgstr "Čet" #: ../glib/gdatetime.c:337 msgctxt "abbreviated weekday name" msgid "Fri" msgstr "Pet" #: ../glib/gdatetime.c:339 msgctxt "abbreviated weekday name" msgid "Sat" msgstr "Sub" #: ../glib/gdatetime.c:341 msgctxt "abbreviated weekday name" msgid "Sun" msgstr "Ned" #: ../glib/gdir.c:155 #, c-format msgid "Error opening directory '%s': %s" msgstr "Greška pri otvaranju mape '%s': %s" #: ../glib/gfileutils.c:700 ../glib/gfileutils.c:792 #, c-format msgid "Could not allocate %lu byte to read file \"%s\"" msgid_plural "Could not allocate %lu bytes to read file \"%s\"" msgstr[0] "" msgstr[1] "" #: ../glib/gfileutils.c:717 #, c-format msgid "Error reading file '%s': %s" msgstr "Greška pri čitanju datoteke '%s': %s" #: ../glib/gfileutils.c:753 #, c-format msgid "File \"%s\" is too large" msgstr "" #: ../glib/gfileutils.c:817 #, c-format msgid "Failed to read from file '%s': %s" msgstr "Greška pri čitanju iz datoteke '%s': %s" #: ../glib/gfileutils.c:865 ../glib/gfileutils.c:937 #, c-format msgid "Failed to open file '%s': %s" msgstr "Greška pri otvaranju datoteke '%s': %s" #: ../glib/gfileutils.c:877 #, c-format msgid "Failed to get attributes of file '%s': fstat() failed: %s" msgstr "Greška pri dohvatu atributa datoteke '%s': fstat() nije uspio: %s" #: ../glib/gfileutils.c:907 #, c-format msgid "Failed to open file '%s': fdopen() failed: %s" msgstr "Greška pri otvaranju datoteke '%s': fdopen() nije uspio: %s" #: ../glib/gfileutils.c:1006 #, c-format msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s" msgstr "" "Greška pri preimenovanju datoteke '%s' u '%s': g_rename() nije uspio: %s" #: ../glib/gfileutils.c:1041 ../glib/gfileutils.c:1540 #, c-format msgid "Failed to create file '%s': %s" msgstr "Greška pri stvaranju datoteke '%s': %s" #: ../glib/gfileutils.c:1068 #, c-format msgid "Failed to write file '%s': write() failed: %s" msgstr "" #: ../glib/gfileutils.c:1111 #, c-format msgid "Failed to write file '%s': fsync() failed: %s" msgstr "" #: ../glib/gfileutils.c:1235 #, c-format msgid "Existing file '%s' could not be removed: g_unlink() failed: %s" msgstr "" "Postojeća datoteka '%s' ne može biti obrisana: g_unlink() nije uspio: %s" #: ../glib/gfileutils.c:1506 #, c-format msgid "Template '%s' invalid, should not contain a '%s'" msgstr "Predložak '%s' nije ispravan, ne smije sadržavati'%s'" #: ../glib/gfileutils.c:1519 #, c-format msgid "Template '%s' doesn't contain XXXXXX" msgstr "" #: ../glib/gfileutils.c:2038 #, c-format msgid "Failed to read the symbolic link '%s': %s" msgstr "Nisam uspio pročitati simboličku vezu '%s': %s" #: ../glib/gfileutils.c:2057 msgid "Symbolic links not supported" msgstr "Nisu podržane simboličke veze" #: ../glib/giochannel.c:1388 #, c-format msgid "Could not open converter from '%s' to '%s': %s" msgstr "Ne mogu otvoriti pretvornik iz '%s' u '%s': %s" #: ../glib/giochannel.c:1733 msgid "Can't do a raw read in g_io_channel_read_line_string" msgstr "Ne mogu izvršiti raw čitanje u g_io_channel_read_line_string" #: ../glib/giochannel.c:1780 ../glib/giochannel.c:2038 #: ../glib/giochannel.c:2125 msgid "Leftover unconverted data in read buffer" msgstr "Postoji ostatak nepretvorenih podataka u međuspremniku za čitanje" #: ../glib/giochannel.c:1861 ../glib/giochannel.c:1938 msgid "Channel terminates in a partial character" msgstr "Kanal završava sa djelomičnim znakom" #: ../glib/giochannel.c:1924 msgid "Can't do a raw read in g_io_channel_read_to_end" msgstr "Ne mogu izvršiti raw čitanje u g_io_channel_read_to_end" #: ../glib/gkeyfile.c:737 msgid "Valid key file could not be found in search dirs" msgstr "" #: ../glib/gkeyfile.c:773 msgid "Not a regular file" msgstr "Nije regularna datoteka" #: ../glib/gkeyfile.c:1174 #, c-format msgid "" "Key file contains line '%s' which is not a key-value pair, group, or comment" msgstr "" "Datoteka s ključem sadrži redak '%s' koji nije oblika ključ-vrijednost, " "grupa ili komentar" #: ../glib/gkeyfile.c:1231 #, c-format msgid "Invalid group name: %s" msgstr "" #: ../glib/gkeyfile.c:1253 msgid "Key file does not start with a group" msgstr "Datoteka s ključem ne započinje s grupom" #: ../glib/gkeyfile.c:1279 #, c-format msgid "Invalid key name: %s" msgstr "" #: ../glib/gkeyfile.c:1306 #, c-format msgid "Key file contains unsupported encoding '%s'" msgstr "Datoteka s ključem sadrži nepodržano kodiranje '%s'" #: ../glib/gkeyfile.c:1549 ../glib/gkeyfile.c:1722 ../glib/gkeyfile.c:3100 #: ../glib/gkeyfile.c:3163 ../glib/gkeyfile.c:3293 ../glib/gkeyfile.c:3423 #: ../glib/gkeyfile.c:3567 ../glib/gkeyfile.c:3796 ../glib/gkeyfile.c:3863 #, c-format msgid "Key file does not have group '%s'" msgstr "Datoteka s ključem ne sadrži grupu '%s'" #: ../glib/gkeyfile.c:1677 #, c-format msgid "Key file does not have key '%s' in group '%s'" msgstr "Datoteka s ključem na sadrži ključ '%s' u grupi '%s'" #: ../glib/gkeyfile.c:1839 ../glib/gkeyfile.c:1955 #, c-format msgid "Key file contains key '%s' with value '%s' which is not UTF-8" msgstr "" "Datoteka s ključem sadrži ključ '%s' čija vrijednost '%s' nije u UTF-8" #: ../glib/gkeyfile.c:1859 ../glib/gkeyfile.c:1975 ../glib/gkeyfile.c:2344 #, c-format msgid "" "Key file contains key '%s' which has a value that cannot be interpreted." msgstr "" #: ../glib/gkeyfile.c:2561 ../glib/gkeyfile.c:2929 #, c-format msgid "" "Key file contains key '%s' in group '%s' which has a value that cannot be " "interpreted." msgstr "" #: ../glib/gkeyfile.c:2639 ../glib/gkeyfile.c:2716 #, c-format msgid "Key '%s' in group '%s' has value '%s' where %s was expected" msgstr "" #: ../glib/gkeyfile.c:4103 msgid "Key file contains escape character at end of line" msgstr "Datoteka s ključem na kraju retka ima izbjegnute znakove" #: ../glib/gkeyfile.c:4125 #, c-format msgid "Key file contains invalid escape sequence '%s'" msgstr "Datoteka s ključem sadrži neispravno izbjegnuti niz '%s'" #: ../glib/gkeyfile.c:4267 #, c-format msgid "Value '%s' cannot be interpreted as a number." msgstr "Vrijednost '%s' ne može biti protumačena kao broj." #: ../glib/gkeyfile.c:4281 #, c-format msgid "Integer value '%s' out of range" msgstr "Brojčana vrijednost '%s' je izvan opsega" #: ../glib/gkeyfile.c:4314 #, c-format msgid "Value '%s' cannot be interpreted as a float number." msgstr "" #: ../glib/gkeyfile.c:4351 #, c-format msgid "Value '%s' cannot be interpreted as a boolean." msgstr "Vrijednost '%s' ne može biti protumačena kao boolean." #: ../glib/gmappedfile.c:129 #, c-format msgid "Failed to get attributes of file '%s%s%s%s': fstat() failed: %s" msgstr "" #: ../glib/gmappedfile.c:195 #, c-format msgid "Failed to map %s%s%s%s: mmap() failed: %s" msgstr "" #: ../glib/gmappedfile.c:261 #, c-format msgid "Failed to open file '%s': open() failed: %s" msgstr "Greška pri otvaranju datoteke '%s': open() nije uspio: %s" #: ../glib/gmarkup.c:398 ../glib/gmarkup.c:440 #, c-format msgid "Error on line %d char %d: " msgstr "" #: ../glib/gmarkup.c:462 ../glib/gmarkup.c:545 #, c-format msgid "Invalid UTF-8 encoded text in name - not valid '%s'" msgstr "" #: ../glib/gmarkup.c:473 #, c-format msgid "'%s' is not a valid name" msgstr "" #: ../glib/gmarkup.c:489 #, c-format msgid "'%s' is not a valid name: '%c'" msgstr "" #: ../glib/gmarkup.c:599 #, c-format msgid "Error on line %d: %s" msgstr "Greška na retku %d: %s" #: ../glib/gmarkup.c:676 #, c-format msgid "" "Failed to parse '%-.*s', which should have been a digit inside a character " "reference (ê for example) - perhaps the digit is too large" msgstr "" "Nisam uspio izanalizirati '%-.*s', koji je trebao biti broj unutar znakovne " "reference (npr. ê) - možda je broj prevelik" #: ../glib/gmarkup.c:688 msgid "" "Character reference did not end with a semicolon; most likely you used an " "ampersand character without intending to start an entity - escape ampersand " "as &" msgstr "" "Znakovna referenca nije završila sa točka-zarezom; vjerojatno ste koristitli " "ampersand znakbez namjere da počnete entitet - escapirajte ampersand kao " "&" #: ../glib/gmarkup.c:714 #, c-format msgid "Character reference '%-.*s' does not encode a permitted character" msgstr "Znakovna referenca '%-.*s' ne kodira dozvoljeni znak" #: ../glib/gmarkup.c:752 msgid "" "Empty entity '&;' seen; valid entities are: & " < > '" msgstr "" "Prazan entitet '&;' ; ispravni entiteti su: & " < > '" #: ../glib/gmarkup.c:760 #, c-format msgid "Entity name '%-.*s' is not known" msgstr "" #: ../glib/gmarkup.c:765 msgid "" "Entity did not end with a semicolon; most likely you used an ampersand " "character without intending to start an entity - escape ampersand as &" msgstr "" "Entitet nije zavšio sa točka-zarezom; vjerojatno ste koristili ampersand " "znak bez namjere da započnete entitet - escapirajte ampersand sa &" #: ../glib/gmarkup.c:1171 msgid "Document must begin with an element (e.g. )" msgstr "Dokument mora početi sa elementom(npr. )" #: ../glib/gmarkup.c:1211 #, c-format msgid "" "'%s' is not a valid character following a '<' character; it may not begin an " "element name" msgstr "" "'%s' nije dozvoljeni znak koji smije slijediti nakon '<' znaka; ne smije " "započeti ime elementa" #: ../glib/gmarkup.c:1253 #, c-format msgid "" "Odd character '%s', expected a '>' character to end the empty-element tag " "'%s'" msgstr "" #: ../glib/gmarkup.c:1334 #, c-format msgid "" "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'" msgstr "" "Neparan znak '%s', očekuje se '=' poslije imena atributa '%s' elementa '%s'" #: ../glib/gmarkup.c:1375 #, c-format msgid "" "Odd character '%s', expected a '>' or '/' character to end the start tag of " "element '%s', or optionally an attribute; perhaps you used an invalid " "character in an attribute name" msgstr "" "Čudan znak '%s', očekuje se da znak '>' ili '/' završe početak taga elementa " "'%s', ili opcionalno atributa; možda ste koristili neispravan znaku imenu " "atributa" #: ../glib/gmarkup.c:1419 #, c-format msgid "" "Odd character '%s', expected an open quote mark after the equals sign when " "giving value for attribute '%s' of element '%s'" msgstr "" "Čudan znak '%s', očekuje se otvoreni navodnik nakon znaka jednakostikada se " "daje vrijednost atributa '%s' elementa '%s'" #: ../glib/gmarkup.c:1552 #, c-format msgid "" "'%s' is not a valid character following the characters ''" msgstr "" "'%s' nije ispravan znak koji može slijediti nakon imena završnog elementa " "'%s'; dozvoljeni znak je '>'" #: ../glib/gmarkup.c:1599 #, c-format msgid "Element '%s' was closed, no element is currently open" msgstr "Element '%s' je zatvoren, trenutno nema otvorenog elementa" #: ../glib/gmarkup.c:1608 #, c-format msgid "Element '%s' was closed, but the currently open element is '%s'" msgstr "Element '%s' je zatvoren, ali trenutno otvoreni element je '%s'" #: ../glib/gmarkup.c:1761 msgid "Document was empty or contained only whitespace" msgstr "Dokument je bio prazan ili je sadržavao samo znakove prazne znakove" #: ../glib/gmarkup.c:1775 msgid "Document ended unexpectedly just after an open angle bracket '<'" msgstr "Dokument je završio neočekivano nakon otvaranja zagrade '<'" #: ../glib/gmarkup.c:1783 ../glib/gmarkup.c:1828 #, c-format msgid "" "Document ended unexpectedly with elements still open - '%s' was the last " "element opened" msgstr "" "Dokument je završio neočekivano sa još uvijek otvorenim elementima- '%s' je " "bio zadnjiotvoreni element" #: ../glib/gmarkup.c:1791 #, c-format msgid "" "Document ended unexpectedly, expected to see a close angle bracket ending " "the tag <%s/>" msgstr "" "Dokument je završio neočekivano, očekivalo se da zatvorena šiljata " "zagradazavrši tag<%s/>" #: ../glib/gmarkup.c:1797 msgid "Document ended unexpectedly inside an element name" msgstr "Dokument je završio neočekivano unutar imena elementa" #: ../glib/gmarkup.c:1803 msgid "Document ended unexpectedly inside an attribute name" msgstr "Dokument je završio neočekivano unutar imena atributa" #: ../glib/gmarkup.c:1808 msgid "Document ended unexpectedly inside an element-opening tag." msgstr "Dokument je završio neočekivano unutar taga koji započinje element" #: ../glib/gmarkup.c:1814 msgid "" "Document ended unexpectedly after the equals sign following an attribute " "name; no attribute value" msgstr "" "Dokument je završio neočekivano nakon što je znak jednakosti slijedioime " "atributa; nema vrijednosti atributa" #: ../glib/gmarkup.c:1821 msgid "Document ended unexpectedly while inside an attribute value" msgstr "Dokument je završio neočekivano unutar vrijednosti atributa" #: ../glib/gmarkup.c:1837 #, c-format msgid "Document ended unexpectedly inside the close tag for element '%s'" msgstr "" "Dokument je završio neočekivano unutar taga koji završava za element '%s'" #: ../glib/gmarkup.c:1843 msgid "" "Document ended unexpectedly inside a comment or processing instruction" msgstr "" "Dokument je završio neočekivano unutar komentara ili izvršavanja instrukcije" #: ../glib/goption.c:857 msgid "Usage:" msgstr "Uporaba:" #: ../glib/goption.c:861 msgid "[OPTION...]" msgstr "[OPTION...]" #: ../glib/goption.c:977 msgid "Help Options:" msgstr "Opcije pomoći:" #: ../glib/goption.c:978 msgid "Show help options" msgstr "Prikaži mogućnosti pomoći" #: ../glib/goption.c:984 msgid "Show all help options" msgstr "Prikaži sve opcije pomoći" #: ../glib/goption.c:1047 msgid "Application Options:" msgstr "Prikaži sve opcije pomoći" #: ../glib/goption.c:1049 msgid "Options:" msgstr "" #: ../glib/goption.c:1113 ../glib/goption.c:1183 #, c-format msgid "Cannot parse integer value '%s' for %s" msgstr "Analiza brojčane vrijednosti '%s' za %s nije uspjela" #: ../glib/goption.c:1123 ../glib/goption.c:1191 #, c-format msgid "Integer value '%s' for %s out of range" msgstr "Brojčana vrijednost '%s' za '%s' izvan opsega" #: ../glib/goption.c:1148 #, c-format msgid "Cannot parse double value '%s' for %s" msgstr "" #: ../glib/goption.c:1156 #, c-format msgid "Double value '%s' for %s out of range" msgstr "" #: ../glib/goption.c:1442 ../glib/goption.c:1521 #, c-format msgid "Error parsing option %s" msgstr "Greška prilikom analize opcije %s" #: ../glib/goption.c:1552 ../glib/goption.c:1665 #, c-format msgid "Missing argument for %s" msgstr "Nedostaje parametar za %s" #: ../glib/goption.c:2126 #, c-format msgid "Unknown option %s" msgstr "Nepoznata opcija %s" #: ../glib/gregex.c:258 msgid "corrupted object" msgstr "" #: ../glib/gregex.c:260 msgid "internal error or corrupted object" msgstr "" #: ../glib/gregex.c:262 msgid "out of memory" msgstr "" #: ../glib/gregex.c:267 msgid "backtracking limit reached" msgstr "" #: ../glib/gregex.c:279 ../glib/gregex.c:287 msgid "the pattern contains items not supported for partial matching" msgstr "" #: ../glib/gregex.c:289 msgid "back references as conditions are not supported for partial matching" msgstr "" #: ../glib/gregex.c:298 msgid "recursion limit reached" msgstr "" #: ../glib/gregex.c:300 msgid "invalid combination of newline flags" msgstr "" #: ../glib/gregex.c:302 msgid "bad offset" msgstr "" #: ../glib/gregex.c:304 msgid "short utf8" msgstr "" #: ../glib/gregex.c:306 msgid "recursion loop" msgstr "" #: ../glib/gregex.c:310 msgid "unknown error" msgstr "" #: ../glib/gregex.c:330 msgid "\\ at end of pattern" msgstr "" #: ../glib/gregex.c:333 msgid "\\c at end of pattern" msgstr "" #: ../glib/gregex.c:336 msgid "unrecognized character following \\" msgstr "" #: ../glib/gregex.c:339 msgid "numbers out of order in {} quantifier" msgstr "" #: ../glib/gregex.c:342 msgid "number too big in {} quantifier" msgstr "" #: ../glib/gregex.c:345 msgid "missing terminating ] for character class" msgstr "" #: ../glib/gregex.c:348 msgid "invalid escape sequence in character class" msgstr "" #: ../glib/gregex.c:351 msgid "range out of order in character class" msgstr "" #: ../glib/gregex.c:354 msgid "nothing to repeat" msgstr "" #: ../glib/gregex.c:358 msgid "unexpected repeat" msgstr "" #: ../glib/gregex.c:361 msgid "unrecognized character after (? or (?-" msgstr "" #: ../glib/gregex.c:364 msgid "POSIX named classes are supported only within a class" msgstr "" #: ../glib/gregex.c:367 msgid "missing terminating )" msgstr "" #: ../glib/gregex.c:370 msgid "reference to non-existent subpattern" msgstr "" #: ../glib/gregex.c:373 msgid "missing ) after comment" msgstr "" #: ../glib/gregex.c:376 msgid "regular expression is too large" msgstr "" #: ../glib/gregex.c:379 msgid "failed to get memory" msgstr "" #: ../glib/gregex.c:383 msgid ") without opening (" msgstr "" #: ../glib/gregex.c:387 msgid "code overflow" msgstr "" #: ../glib/gregex.c:391 msgid "unrecognized character after (?<" msgstr "" #: ../glib/gregex.c:394 msgid "lookbehind assertion is not fixed length" msgstr "" #: ../glib/gregex.c:397 msgid "malformed number or name after (?(" msgstr "" #: ../glib/gregex.c:400 msgid "conditional group contains more than two branches" msgstr "" #: ../glib/gregex.c:403 msgid "assertion expected after (?(" msgstr "" #. translators: '(?R' and '(?[+-]digits' are both meant as (groups of) #. * sequences here, '(?-54' would be an example for the second group. #. #: ../glib/gregex.c:410 msgid "(?R or (?[+-]digits must be followed by )" msgstr "" #: ../glib/gregex.c:413 msgid "unknown POSIX class name" msgstr "" #: ../glib/gregex.c:416 msgid "POSIX collating elements are not supported" msgstr "" #: ../glib/gregex.c:419 msgid "character value in \\x{...} sequence is too large" msgstr "" #: ../glib/gregex.c:422 msgid "invalid condition (?(0)" msgstr "" #: ../glib/gregex.c:425 msgid "\\C not allowed in lookbehind assertion" msgstr "" #: ../glib/gregex.c:432 msgid "escapes \\L, \\l, \\N{name}, \\U, and \\u are not supported" msgstr "" #: ../glib/gregex.c:435 msgid "recursive call could loop indefinitely" msgstr "" #: ../glib/gregex.c:439 msgid "unrecognized character after (?P" msgstr "" #: ../glib/gregex.c:442 msgid "missing terminator in subpattern name" msgstr "" #: ../glib/gregex.c:445 msgid "two named subpatterns have the same name" msgstr "" #: ../glib/gregex.c:448 msgid "malformed \\P or \\p sequence" msgstr "" #: ../glib/gregex.c:451 msgid "unknown property name after \\P or \\p" msgstr "" #: ../glib/gregex.c:454 msgid "subpattern name is too long (maximum 32 characters)" msgstr "" #: ../glib/gregex.c:457 msgid "too many named subpatterns (maximum 10,000)" msgstr "" #: ../glib/gregex.c:460 msgid "octal value is greater than \\377" msgstr "" #: ../glib/gregex.c:464 msgid "overran compiling workspace" msgstr "" #: ../glib/gregex.c:468 msgid "previously-checked referenced subpattern not found" msgstr "" #: ../glib/gregex.c:471 msgid "DEFINE group contains more than one branch" msgstr "" #: ../glib/gregex.c:474 msgid "inconsistent NEWLINE options" msgstr "" #: ../glib/gregex.c:477 msgid "" "\\g is not followed by a braced, angle-bracketed, or quoted name or number, " "or by a plain number" msgstr "" #: ../glib/gregex.c:481 msgid "a numbered reference must not be zero" msgstr "" #: ../glib/gregex.c:484 msgid "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)" msgstr "" #: ../glib/gregex.c:487 msgid "(*VERB) not recognized" msgstr "" #: ../glib/gregex.c:490 msgid "number is too big" msgstr "" #: ../glib/gregex.c:493 msgid "missing subpattern name after (?&" msgstr "" #: ../glib/gregex.c:496 msgid "digit expected after (?+" msgstr "" #: ../glib/gregex.c:499 msgid "] is an invalid data character in JavaScript compatibility mode" msgstr "" #: ../glib/gregex.c:502 msgid "different names for subpatterns of the same number are not allowed" msgstr "" #: ../glib/gregex.c:505 msgid "(*MARK) must have an argument" msgstr "" #: ../glib/gregex.c:508 msgid "\\c must be followed by an ASCII character" msgstr "" #: ../glib/gregex.c:511 msgid "\\k is not followed by a braced, angle-bracketed, or quoted name" msgstr "" #: ../glib/gregex.c:514 msgid "\\N is not supported in a class" msgstr "" #: ../glib/gregex.c:517 msgid "too many forward references" msgstr "" #: ../glib/gregex.c:520 msgid "name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN)" msgstr "" #: ../glib/gregex.c:523 msgid "character value in \\u.... sequence is too large" msgstr "" #: ../glib/gregex.c:746 ../glib/gregex.c:1973 #, c-format msgid "Error while matching regular expression %s: %s" msgstr "" #: ../glib/gregex.c:1317 msgid "PCRE library is compiled without UTF8 support" msgstr "" #: ../glib/gregex.c:1321 msgid "PCRE library is compiled without UTF8 properties support" msgstr "" #: ../glib/gregex.c:1329 msgid "PCRE library is compiled with incompatible options" msgstr "" #: ../glib/gregex.c:1358 #, c-format msgid "Error while optimizing regular expression %s: %s" msgstr "" #: ../glib/gregex.c:1438 #, c-format msgid "Error while compiling regular expression %s at char %d: %s" msgstr "" #: ../glib/gregex.c:2409 msgid "hexadecimal digit or '}' expected" msgstr "" #: ../glib/gregex.c:2425 msgid "hexadecimal digit expected" msgstr "" #: ../glib/gregex.c:2465 msgid "missing '<' in symbolic reference" msgstr "" #: ../glib/gregex.c:2474 msgid "unfinished symbolic reference" msgstr "" #: ../glib/gregex.c:2481 msgid "zero-length symbolic reference" msgstr "" #: ../glib/gregex.c:2492 msgid "digit expected" msgstr "" #: ../glib/gregex.c:2510 msgid "illegal symbolic reference" msgstr "" #: ../glib/gregex.c:2572 msgid "stray final '\\'" msgstr "" #: ../glib/gregex.c:2576 msgid "unknown escape sequence" msgstr "" #: ../glib/gregex.c:2586 #, c-format msgid "Error while parsing replacement text \"%s\" at char %lu: %s" msgstr "" #: ../glib/gshell.c:96 msgid "Quoted text doesn't begin with a quotation mark" msgstr "Tekst pod navodnicima ne počinje sa navodnikom" #: ../glib/gshell.c:186 msgid "Unmatched quotation mark in command line or other shell-quoted text" msgstr "Navodnik nije uparen u naredbenoj liniji" #: ../glib/gshell.c:582 #, c-format msgid "Text ended just after a '\\' character. (The text was '%s')" msgstr "Tekst je završio nakon '\\' znaka (Tekst je bio '%s')" #: ../glib/gshell.c:589 #, c-format msgid "" "Text ended before matching quote was found for %c. (The text was '%s')" msgstr "" "Tekst je završio prije nego što je nađen završni navodnik %c. (Tekst je bio " "'%s')" #: ../glib/gshell.c:601 msgid "Text was empty (or contained only whitespace)" msgstr "Tekst je bio prazan (ili je sadržavao samo prazne znakove)" #: ../glib/gspawn.c:209 #, c-format msgid "Failed to read data from child process (%s)" msgstr "Neuspješno čitanje podatka iz podređenog procesa (%s)" #: ../glib/gspawn.c:353 #, c-format msgid "Unexpected error in select() reading data from a child process (%s)" msgstr "" "Neočekivana greška u select() čitanju podataka iz podređenog procesa (%s)" #: ../glib/gspawn.c:438 #, c-format msgid "Unexpected error in waitpid() (%s)" msgstr "Neočekivana greška u waitpid() (%s)" #: ../glib/gspawn.c:844 ../glib/gspawn-win32.c:1233 #, c-format msgid "Child process exited with code %ld" msgstr "" #: ../glib/gspawn.c:852 #, c-format msgid "Child process killed by signal %ld" msgstr "" #: ../glib/gspawn.c:859 #, c-format msgid "Child process stopped by signal %ld" msgstr "" #: ../glib/gspawn.c:866 #, c-format msgid "Child process exited abnormally" msgstr "" #: ../glib/gspawn.c:1271 ../glib/gspawn-win32.c:339 ../glib/gspawn-win32.c:347 #, c-format msgid "Failed to read from child pipe (%s)" msgstr "Neuspješno čitanje iz podređenog slivnika (%s)" #: ../glib/gspawn.c:1341 #, c-format msgid "Failed to fork (%s)" msgstr "Pokretanje nije uspio (%s)" #: ../glib/gspawn.c:1490 ../glib/gspawn-win32.c:370 #, c-format msgid "Failed to change to directory '%s' (%s)" msgstr "Nisam mogao promijeniti putanju u mapu '%s' (%s)" #: ../glib/gspawn.c:1500 #, c-format msgid "Failed to execute child process \"%s\" (%s)" msgstr "Neuspješno pokretanje podređenog procesa \"%s\" (%s)" #: ../glib/gspawn.c:1510 #, c-format msgid "Failed to redirect output or input of child process (%s)" msgstr "Neuspješno preusmjeravanje izlaza ili ulaza podređenog procesa (%s)" #: ../glib/gspawn.c:1519 #, c-format msgid "Failed to fork child process (%s)" msgstr "Nisam uspio pokrenuti proces dijete (%s)" #: ../glib/gspawn.c:1527 #, c-format msgid "Unknown error executing child process \"%s\"" msgstr "Nepoznata greška pri pokretanju podređenog procesa \"%s\"" #: ../glib/gspawn.c:1551 #, c-format msgid "Failed to read enough data from child pid pipe (%s)" msgstr "" "Neuspješno čitanje dovoljno podataka iz id procesa podređenog slivnika (%s)" #: ../glib/gspawn-win32.c:283 msgid "Failed to read data from child process" msgstr "Neuspješno čitanje podataka iz podređenog procesa" #: ../glib/gspawn-win32.c:300 #, c-format msgid "Failed to create pipe for communicating with child process (%s)" msgstr "" "Neuspješno stvaranje slivnika za komunikaciju s podređenim procesom (%s)" #: ../glib/gspawn-win32.c:376 ../glib/gspawn-win32.c:495 #, c-format msgid "Failed to execute child process (%s)" msgstr "Nisam mogao izvesti proces dijete (%s)" #: ../glib/gspawn-win32.c:445 #, c-format msgid "Invalid program name: %s" msgstr "Neispravno ime programa: %s" #: ../glib/gspawn-win32.c:455 ../glib/gspawn-win32.c:722 #: ../glib/gspawn-win32.c:1297 #, c-format msgid "Invalid string in argument vector at %d: %s" msgstr "Neispravan niz znakova u argumentima na %d: %s" #: ../glib/gspawn-win32.c:466 ../glib/gspawn-win32.c:737 #: ../glib/gspawn-win32.c:1330 #, c-format msgid "Invalid string in environment: %s" msgstr "Neispravan niz znakova u okružju: %s" #: ../glib/gspawn-win32.c:718 ../glib/gspawn-win32.c:1278 #, c-format msgid "Invalid working directory: %s" msgstr "Neispravni radni direktorij: %s" #: ../glib/gspawn-win32.c:783 #, c-format msgid "Failed to execute helper program (%s)" msgstr "Neuspješno pokretanje programa pomoći (%s)" #: ../glib/gspawn-win32.c:997 msgid "" "Unexpected error in g_io_channel_win32_poll() reading data from a child " "process" msgstr "" "Neočekivana greška u g_io_channel_win32_poll() čitanju podataka podređenog " "procesa" #: ../glib/gutf8.c:795 msgid "Failed to allocate memory" msgstr "" #: ../glib/gutf8.c:928 msgid "Character out of range for UTF-8" msgstr "Znak je izvan raspona za UTF-8" #: ../glib/gutf8.c:1029 ../glib/gutf8.c:1038 ../glib/gutf8.c:1168 #: ../glib/gutf8.c:1177 ../glib/gutf8.c:1316 ../glib/gutf8.c:1413 msgid "Invalid sequence in conversion input" msgstr "Neispravna sekvenca u pretvaranju ulaza" #: ../glib/gutf8.c:1327 ../glib/gutf8.c:1424 msgid "Character out of range for UTF-16" msgstr "Znak je izvan raspona za UTF-16" #: ../glib/gutils.c:2133 ../glib/gutils.c:2160 ../glib/gutils.c:2266 #, c-format msgid "%u byte" msgid_plural "%u bytes" msgstr[0] "" msgstr[1] "" #: ../glib/gutils.c:2139 #, c-format msgid "%.1f KiB" msgstr "" #: ../glib/gutils.c:2141 #, c-format msgid "%.1f MiB" msgstr "" #: ../glib/gutils.c:2144 #, c-format msgid "%.1f GiB" msgstr "" #: ../glib/gutils.c:2147 #, c-format msgid "%.1f TiB" msgstr "" #: ../glib/gutils.c:2150 #, c-format msgid "%.1f PiB" msgstr "" #: ../glib/gutils.c:2153 #, c-format msgid "%.1f EiB" msgstr "" #: ../glib/gutils.c:2166 #, c-format msgid "%.1f kB" msgstr "" #: ../glib/gutils.c:2169 ../glib/gutils.c:2284 #, c-format msgid "%.1f MB" msgstr "" #: ../glib/gutils.c:2172 ../glib/gutils.c:2289 #, c-format msgid "%.1f GB" msgstr "" #: ../glib/gutils.c:2174 ../glib/gutils.c:2294 #, c-format msgid "%.1f TB" msgstr "" #: ../glib/gutils.c:2177 ../glib/gutils.c:2299 #, c-format msgid "%.1f PB" msgstr "" #: ../glib/gutils.c:2180 ../glib/gutils.c:2304 #, c-format msgid "%.1f EB" msgstr "" #. Translators: the %s in "%s bytes" will always be replaced by a number. #: ../glib/gutils.c:2217 #, c-format msgid "%s byte" msgid_plural "%s bytes" msgstr[0] "" msgstr[1] "" #. Translators: this is from the deprecated function g_format_size_for_display() which uses 'KB' to #. * mean 1024 bytes. I am aware that 'KB' is not correct, but it has been preserved for reasons of #. * compatibility. Users will not see this string unless a program is using this deprecated function. #. * Please translate as literally as possible. #. #: ../glib/gutils.c:2279 #, c-format msgid "%.1f KB" msgstr "" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/gnome-user-share.po0000644000000000000000000002073512704126313021723 0ustar # Croatian translation for gnome-user-share # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the gnome-user-share package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: gnome-user-share\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-04-11 06:12+0000\n" "PO-Revision-Date: 2015-12-19 23:14+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 06:20+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:1 msgid "Share Public directory over the network" msgstr "Dijeli Javnu mapu preko mreže" #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:2 msgid "" "If this is true, the Public directory in the users home directory will be " "shared over the network when the user is logged in." msgstr "" "Ako je ova stavka odabrana, javna mapa u korisničkoj mapi će biti dijeljena " "preko mreže kada je korisnik prijavljen." #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:3 msgid "When to require passwords" msgstr "Kada zahtijevati lozinku" #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:4 msgid "" "When to ask for passwords. Possible values are \"never\", \"on_write\", and " "\"always\"." msgstr "" "Kada pitati za lozinku. Moguće vrijednosti su \"nikad\", \"prilikom " "zapisivanja\" i \"uvijek\"." #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:5 msgid "Whether Bluetooth clients can send files using ObexPush." msgstr "Trebaju li Bluetooth klijenti slati datoteke koristeći ObexPush?" #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:6 msgid "" "If this is true, Bluetooth devices can send files to the user's Downloads " "directory when logged in." msgstr "" "Ako je odabrano, Bluetooth uređaji mogu slati datoteke u korisnikov " "direktorij \"Preuzimanja\" kada je prijavljen." #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:7 msgid "When to accept files sent over Bluetooth" msgstr "Kada prihvatiti datoteke poslane Bluetooth povezivanjem" #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:8 msgid "" "When to accept files sent over Bluetooth. Possible values are \"always\", " "\"bonded\" and \"ask\"." msgstr "" "Kada prihvatiti datoteke poslane Bluetooth povezivanjem. Moguće vrijednosti " "su \"uvijek\", \"vezan\" i \"pitaj\"." #: ../data/org.gnome.desktop.file-sharing.gschema.xml.in.in.h:9 msgid "Whether to notify about newly received files." msgstr "Treba li obavijestiti o novim primljenim datotekama." #: ../data/gnome-user-share-obexpush.desktop.in.in.h:1 #: ../data/gnome-user-share-webdav.desktop.in.in.h:1 #: ../data/gnome-user-share-properties.desktop.in.h:1 msgid "Personal File Sharing" msgstr "Dijeljenje osobnih datoteka" #: ../data/gnome-user-share-obexpush.desktop.in.in.h:2 msgid "Launch Bluetooth ObexPush sharing if enabled" msgstr "Pokreni Bluetooth ObexPush dijeljenje ako je omogućeno" #: ../data/gnome-user-share-obexpush.desktop.in.in.h:3 #: ../data/gnome-user-share-webdav.desktop.in.in.h:3 msgid "share;files;bluetooth;obex;http;network;copy;send;" msgstr "dijeli;datoteka;bluetooth;obex;http;mreža;kopiraj;pošalji;" #: ../data/gnome-user-share-webdav.desktop.in.in.h:2 msgid "Launch Personal File Sharing if enabled" msgstr "Pokreni dijeljenje osobnih datoteka ako je omogućeno" #: ../data/file-share-properties.ui.h:1 msgid "Personal File Sharing Preferences" msgstr "Osobitosti osobnog dijeljenja datoteka" #: ../data/file-share-properties.ui.h:2 msgid "Share Files over the Network" msgstr "Dijeli datoteke putem mreže" #: ../data/file-share-properties.ui.h:3 msgid "_Share public files on network" msgstr "_Dijeli javne datoteke preko mreže" #: ../data/file-share-properties.ui.h:4 msgid "_Password:" msgstr "_Lozinka:" #: ../data/file-share-properties.ui.h:5 msgid "_Require password:" msgstr "_Zahtijeva lozinku:" #: ../data/file-share-properties.ui.h:6 msgid "Receive Files over Bluetooth" msgstr "Primi datoteke putem Bluetootha" #: ../data/file-share-properties.ui.h:7 msgid "Receive files in _Downloads folder over Bluetooth" msgstr "Primi datoteke u mapu _Preuzimanja preko Bluetootha" #: ../data/file-share-properties.ui.h:8 msgid "_Accept files: " msgstr "_Prihvati datoteke: " #: ../data/file-share-properties.ui.h:9 msgid "_Notify about received files" msgstr "_Obavijesti o primljenim datotekama" #: ../data/gnome-user-share-properties.desktop.in.h:2 msgid "Preferences for sharing of files" msgstr "Osobitosti dijeljenja datoteka" #. translators: This is the label for the "Sharing" panel in the Settings #: ../src/nautilus-share-bar.c:102 msgid "Sharing" msgstr "Dijeljenje" #: ../src/nautilus-share-bar.c:116 msgid "Preferences" msgstr "Osobitosti" #. translators: This is the tooltip for the "Sharing" panel in the Settings #: ../src/nautilus-share-bar.c:120 msgid "Sharing Settings" msgstr "Postavke dijeljenja" #: ../src/share-extension.c:147 msgid "May be shared over the network" msgstr "Može se dijeliti preko mreže" #: ../src/file-share-properties.c:139 msgid "" "This feature cannot be enabled because the required packages are not " "installed on your system" msgstr "" "Ova značajka se ne može omogućiti jer zahtijevani paketi nisu instalirani na " "vašem sustavu" #: ../src/file-share-properties.c:251 msgid "No reason" msgstr "Bez razloga" #: ../src/file-share-properties.c:279 msgid "Could not display the help contents." msgstr "Nije moguće prikazati sadržaj pomoći." #: ../src/file-share-properties.c:309 msgid "Could not build interface." msgstr "Nije moguće izgraditi sučelje." #: ../src/file-share-properties.c:338 msgid "Never" msgstr "Nikada" #: ../src/file-share-properties.c:341 msgid "When writing files" msgstr "Prilikom pisanja datoteka" #: ../src/file-share-properties.c:344 ../src/file-share-properties.c:367 msgid "Always" msgstr "Uvijek" #: ../src/file-share-properties.c:370 msgid "Only for set up devices" msgstr "Samo za postavljene uređaje" #: ../src/file-share-properties.c:375 msgid "Ask" msgstr "Pitaj" #. Translators: The %s will get filled in with the user name #. of the user, to form a genitive. If this is difficult to #. translate correctly so that it will work correctly in your #. language, you may use something equivalent to #. "Public files of %s", or leave out the %s altogether. #. In the latter case, please put "%.0s" somewhere in the string, #. which will match the user name string passed by the C code, #. but not put the user name in the final string. This is to #. avoid the warning that msgfmt might otherwise generate. #: ../src/http.c:125 #, c-format msgid "%s's public files" msgstr "javni podaci korisnika %s" #. Translators: This is similar to the string before, only it #. has the hostname in it too. #: ../src/http.c:129 #, c-format msgid "%s's public files on %s" msgstr "javni podaci korisnika %s na %s" #. Translators: %s is the name of the filename received #: ../src/obexpush.c:231 #, c-format msgid "You received \"%s\" via Bluetooth" msgstr "Primili ste datoteku \"%s\" Bluetooth povezivanjem" #: ../src/obexpush.c:232 msgid "You received a file" msgstr "Primili ste datoteku" #: ../src/obexpush.c:240 msgid "Open File" msgstr "Otvori datoteku" #: ../src/obexpush.c:244 msgid "Reveal File" msgstr "Otkrij datoteku" #: ../src/obexpush.c:254 #, c-format msgid "You have received the file “%s” over Bluetooth." msgstr "Primili ste datoteku \"%s\" Bluetooth povezivanjem" #: ../src/obexpush.c:264 ../src/obexpush.c:387 msgid "File Received" msgstr "Datoteka primljena" #: ../src/obexpush.c:267 msgid "Open" msgstr "Otvori" #: ../src/obexpush.c:270 msgid "Reveal" msgstr "Otkrij" #: ../src/obexpush.c:271 ../src/obexpush.c:391 msgid "OK" msgstr "U redu" #: ../src/obexpush.c:289 msgid "File reception complete" msgstr "Primanje datoteka završeno" #. Translators: %s is the name of the filename being received #: ../src/obexpush.c:381 ../src/obexpush.c:410 #, c-format msgid "You have been sent a file \"%s\" via Bluetooth" msgstr "Poslali ste datoteku \"%s\" putem Bluetootha" #: ../src/obexpush.c:389 msgid "Accept" msgstr "Prihvati" #: ../src/obexpush.c:390 msgid "Reject" msgstr "Odbij" #: ../src/obexpush.c:411 msgid "You have been sent a file" msgstr "Poslali ste datoteku" #: ../src/obexpush.c:420 msgid "Receive" msgstr "Primi" #: ../src/obexpush.c:423 msgid "Cancel" msgstr "Odustani" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/xdg-user-dirs-gtk.po0000644000000000000000000000426012704126313022015 0ustar # Croatian translation for xdg-user-dirs-gtk # Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009 # This file is distributed under the same license as the xdg-user-dirs-gtk package. # FIRST AUTHOR , 2009. # msgid "" msgstr "" "Project-Id-Version: xdg-user-dirs-gtk\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2015-12-04 03:00+0000\n" "PO-Revision-Date: 2015-04-12 21:10+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 07:15+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../update.c:159 msgid "Update standard folders to current language?" msgstr "Ažuriraj uobičajene mape prema trenutnom jeziku?" #: ../update.c:161 msgid "" "You have logged in in a new language. You can automatically update the names " "of some standard folders in your home folder to match this language. The " "update would change the following folders:" msgstr "" "Prijavili ste se s novim jezikom. Možete automatski ažurirati nazive nekih " "uobičajenih mapa u svojoj osobnoj mapi, kako bi odgovarali ovom jeziku. " "Ažuriranje bi promijenilo sljedeće mape:" #: ../update.c:164 msgid "_Keep Old Names" msgstr "_Zadrži stare nazive" #: ../update.c:165 msgid "_Update Names" msgstr "_Ažuriraj nazive" #: ../update.c:191 msgid "Current folder name" msgstr "Trenutni naziv mapa" #: ../update.c:196 msgid "New folder name" msgstr "Novi naziv mapa" #: ../update.c:206 msgid "Note that existing content will not be moved." msgstr "Znajte da postojeći sadržaj neće biti premješten." #: ../update.c:213 msgid "_Don't ask me this again" msgstr "_Nemoj me pitati ponovno" #: ../update.c:230 msgid "There was an error updating the folders" msgstr "Došlo je do greške prilikom ažuriranja mapa" #: ../user-dirs-update-gtk.desktop.in.h:1 msgid "User folders update" msgstr "Ažuriranje korisničkih mapa" #: ../user-dirs-update-gtk.desktop.in.h:2 msgid "Update common folders names to match current locale" msgstr "Ažuriraj nazive uobičajenih mapa kako bi odgovarali trenutnom jeziku" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/xdg-user-dirs.po0000644000000000000000000000424012704126313021230 0ustar # Croatian translation for xdg-user-dirs # Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007 # This file is distributed under the same license as the xdg-user-dirs package. # FIRST AUTHOR , 2007. # msgid "" msgstr "" "Project-Id-Version: xdg-user-dirs\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2009-09-18 14:16+0200\n" "PO-Revision-Date: 2010-09-23 19:45+0000\n" "Last-Translator: Saša Teković \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 07:15+0000\n" "X-Generator: Launchpad (build 17995)\n" #: translate.c:2 msgid "Applications" msgstr "Aplikacije" #: translate.c:2 msgid "applications" msgstr "aplikacije" #: translate.c:3 msgid "Desktop" msgstr "Radna površina" #: translate.c:3 msgid "desktop" msgstr "radna površina" #: translate.c:4 msgid "Documents" msgstr "Dokumenti" #: translate.c:4 msgid "documents" msgstr "dokumenti" #: translate.c:5 msgid "Download" msgstr "Preuzimanje" #: translate.c:5 msgid "download" msgstr "preuzimanje" #: translate.c:6 msgid "Downloads" msgstr "Preuzimanja" #: translate.c:6 msgid "downloads" msgstr "preuzimanja" #: translate.c:7 msgid "Movies" msgstr "Filmovi" #: translate.c:7 msgid "movies" msgstr "filmovi" #: translate.c:8 msgid "Music" msgstr "Glazba" #: translate.c:8 msgid "music" msgstr "glazba" #: translate.c:9 msgid "Photos" msgstr "Fotografije" #: translate.c:9 msgid "photos" msgstr "fotografije" #: translate.c:10 msgid "Pictures" msgstr "Slike" #: translate.c:10 msgid "pictures" msgstr "slike" #: translate.c:11 msgid "Projects" msgstr "Projekti" #: translate.c:11 msgid "projects" msgstr "projekti" #: translate.c:12 msgid "Public" msgstr "Javno" #: translate.c:12 msgid "public" msgstr "javno" #: translate.c:13 msgid "Share" msgstr "Dijeljenje" #: translate.c:13 msgid "share" msgstr "dijeljenje" #: translate.c:14 msgid "Templates" msgstr "Predlošci" #: translate.c:14 msgid "templates" msgstr "predlošci" #: translate.c:15 msgid "Videos" msgstr "Snimke" #: translate.c:15 msgid "videos" msgstr "snimke" language-pack-gnome-hr-base/data/hr/LC_MESSAGES/metacity.po0000644000000000000000000015230712704126313020362 0ustar # Translation of metacity to Croatiann # Copyright (C) Croatiann team # Translators: Antun Krasic ,Automatski Prijevod <>,Danijel Studen ,Denis Lackovic ,Jerko Škifić ,Kresimir Kalafatic <>,Željko Brajdić ,Ljubomir Božić ,Nikola Planinac <>,pr pr ,Robert Sedak ,Tanja Minarik ,Tomislav Cavrag ,Vedran Vyroubal , msgid "" msgstr "" "Project-Id-Version: metacity 0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-04-13 16:23+0000\n" "PO-Revision-Date: 2015-11-29 18:06+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-04-15 05:49+0000\n" "X-Generator: Launchpad (build 17995)\n" #: ../src/50-metacity-navigation.xml.in.h:1 msgid "Navigation" msgstr "Navigacija" #: ../src/50-metacity-navigation.xml.in.h:2 msgid "Move window to workspace 1" msgstr "Premjesti prozor na radnu površinu 1" #: ../src/50-metacity-navigation.xml.in.h:3 msgid "Move window to workspace 2" msgstr "Premjesti prozor na radnu površinu 2" #: ../src/50-metacity-navigation.xml.in.h:4 msgid "Move window to workspace 3" msgstr "Premjesti prozor na radnu površinu 3" #: ../src/50-metacity-navigation.xml.in.h:5 msgid "Move window to workspace 4" msgstr "Premjesti prozor na radnu površinu 4" #: ../src/50-metacity-navigation.xml.in.h:6 msgid "Move window one workspace to the left" msgstr "Premjesti prozor jednu radnu provršinu nalijevo" #: ../src/50-metacity-navigation.xml.in.h:7 msgid "Move window one workspace to the right" msgstr "Premjesti prozor jednu radnu površinu udesno" #: ../src/50-metacity-navigation.xml.in.h:8 msgid "Move window one workspace up" msgstr "Premjesti prozor jedanu radnu površinu gore" #: ../src/50-metacity-navigation.xml.in.h:9 msgid "Move window one workspace down" msgstr "Premjesti prozor jednu radnu površinu dolje" #: ../src/50-metacity-navigation.xml.in.h:10 msgid "Switch windows" msgstr "Promijeni prozore" #: ../src/50-metacity-navigation.xml.in.h:11 msgid "Switch applications" msgstr "Promijeni između programa" #: ../src/50-metacity-navigation.xml.in.h:12 msgid "Switch windows of an application" msgstr "Promijeni prozore programa" #: ../src/50-metacity-navigation.xml.in.h:13 msgid "Switch system controls" msgstr "Promijeni kontrole sustava" #: ../src/50-metacity-navigation.xml.in.h:14 msgid "Switch windows directly" msgstr "Izravno promijeni prozore" #: ../src/50-metacity-navigation.xml.in.h:15 msgid "Switch windows of an app directly" msgstr "Izravno promijeni prozore programa" #: ../src/50-metacity-navigation.xml.in.h:16 msgid "Switch system controls directly" msgstr "Izravno promijeni kontrole sustava" #: ../src/50-metacity-navigation.xml.in.h:17 msgid "Hide all normal windows" msgstr "Sakrij sve normalne prozore" #: ../src/50-metacity-navigation.xml.in.h:18 msgid "Switch to workspace 1" msgstr "Prebaci na radnu površinu 1" #: ../src/50-metacity-navigation.xml.in.h:19 msgid "Switch to workspace 2" msgstr "Prebaci na radnu površinu 2" #: ../src/50-metacity-navigation.xml.in.h:20 msgid "Switch to workspace 3" msgstr "Prebaci na radnu površinu 3" #: ../src/50-metacity-navigation.xml.in.h:21 msgid "Switch to workspace 4" msgstr "Prebaci na radnu površinu 4" #: ../src/50-metacity-navigation.xml.in.h:22 msgid "Move to workspace left" msgstr "Pomakni na lijevu radnu površinu" #: ../src/50-metacity-navigation.xml.in.h:23 msgid "Move to workspace right" msgstr "Pomakni na desnu radnu površinu" #: ../src/50-metacity-navigation.xml.in.h:24 msgid "Move to workspace above" msgstr "Pomakni na gornju radnu površinu" #: ../src/50-metacity-navigation.xml.in.h:25 msgid "Move to workspace below" msgstr "Pomakni na donju radnu površinu" #: ../src/50-metacity-system.xml.in.h:1 msgid "System" msgstr "Sustav" #: ../src/50-metacity-system.xml.in.h:2 msgid "Show the run command prompt" msgstr "Pokaži prozor za unos naredbe" #: ../src/50-metacity-system.xml.in.h:3 msgid "Show the applications menu" msgstr "Prikaži izbornik aplikacije" #: ../src/50-metacity-windows.xml.in.h:1 msgid "Windows" msgstr "Prozori" #: ../src/50-metacity-windows.xml.in.h:2 msgid "Activate the window menu" msgstr "Aktiviraj izbornik prozora" #: ../src/50-metacity-windows.xml.in.h:3 msgid "Toggle fullscreen mode" msgstr "Postavi preko cijelog zaslona" #: ../src/50-metacity-windows.xml.in.h:4 msgid "Toggle maximization state" msgstr "Promijeni stanje maksimizacije" #: ../src/50-metacity-windows.xml.in.h:5 msgid "Maximize window" msgstr "Maksimiziraj prozor" #: ../src/50-metacity-windows.xml.in.h:6 msgid "Restore window" msgstr "Povrati prozor" #: ../src/50-metacity-windows.xml.in.h:7 msgid "Toggle shaded state" msgstr "Promijeni stanje zasjenjenosti" #: ../src/50-metacity-windows.xml.in.h:8 msgid "Close window" msgstr "Zatvori prozor" #: ../src/50-metacity-windows.xml.in.h:9 msgid "Minimize window" msgstr "Minimiziraj prozor" #: ../src/50-metacity-windows.xml.in.h:10 msgid "Move window" msgstr "Pomakni prozor" #: ../src/50-metacity-windows.xml.in.h:11 msgid "Resize window" msgstr "Promijeni veličinu prozora" #: ../src/50-metacity-windows.xml.in.h:12 msgid "Toggle window on all workspaces or one" msgstr "" "Uključivanje/isključivanje pojavljivanje prozora na jednoj ili svim radnim " "površinama" #: ../src/50-metacity-windows.xml.in.h:13 msgid "Raise window if covered, otherwise lower it" msgstr "Podigni prozor ako je prekriven inače ga spusti" #: ../src/50-metacity-windows.xml.in.h:14 msgid "Raise window above other windows" msgstr "Podigni prozor iznad ostalih prozora" #: ../src/50-metacity-windows.xml.in.h:15 msgid "Lower window below other windows" msgstr "Spusti prozor ispod ostalih prozora" #: ../src/50-metacity-windows.xml.in.h:16 msgid "Maximize window vertically" msgstr "Maksimiziranje prozora okomito" #: ../src/50-metacity-windows.xml.in.h:17 msgid "Maximize window horizontally" msgstr "Maksimiziranje prozora horizontalno" #: ../src/50-metacity-windows.xml.in.h:18 msgid "View split on left" msgstr "Prikaži prijelom lijevo" #: ../src/50-metacity-windows.xml.in.h:19 msgid "View split on right" msgstr "Prikaži prijelom desno" #: ../src/core/bell.c:296 msgid "Bell event" msgstr "Signaliziraj događaj" #: ../src/core/core.c:217 #, c-format msgid "Unknown window information request: %d" msgstr "Nepoznati zahtijev informacija o prozoru: %d" #. Translators: %s is a window title #: ../src/core/delete.c:94 #, c-format msgid "%s is not responding." msgstr "%s ne odgovara." #: ../src/core/delete.c:99 msgid "" "You may choose to wait a short while for it to continue or force the " "application to quit entirely." msgstr "" "Možete pričekati neko vrijeme da program nastavi s radom ili možete " "prisiliti prekid rada programa." #: ../src/core/delete.c:108 msgid "_Wait" msgstr "_Čekaj" #: ../src/core/delete.c:108 msgid "_Force Quit" msgstr "_Prisili izlaženje" #: ../src/core/delete.c:206 #, c-format msgid "Failed to get hostname: %s\n" msgstr "Neuspjelo dobivanje naziva računala: %s\n" #: ../src/core/display.c:325 #, c-format msgid "Failed to open X Window System display '%s'\n" msgstr "Neuspjelo otvaranje X Window sustava prikaza '%s'\n" #: ../src/core/keybindings.c:688 #, c-format msgid "" "Some other program is already using the key %s with modifiers %x as a " "binding\n" msgstr "" "Neki drugi program već koristi ključ %s sa modifikacijama %x kao spoj\n" #: ../src/core/main.c:129 #, c-format msgid "" "metacity %s\n" "Copyright (C) 2001-%s Havoc Pennington, Red Hat, Inc., and others\n" "This is free software; see the source for copying conditions.\n" "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A " "PARTICULAR PURPOSE.\n" msgstr "" "metacity %s\n" "Copyright (C) 2001-%s Havoc Pennington, Red Hat, Inc., i ostali\n" "Ovo je slobodan softver; pogledajte izvor za uvjete kopiranja.\n" "NE postoji jamstvo; čak ni za UTRŽIVOST ili PRIKLADNOST ZA ODREĐENU SVRHU.\n" #: ../src/core/main.c:257 msgid "Disable connection to session manager" msgstr "Isključi vezu prema upravitelju sesija" #: ../src/core/main.c:263 msgid "Replace the running window manager with Metacity" msgstr "Zamjeni tekući upravitelj porozorima sa Metacity" #: ../src/core/main.c:269 msgid "Specify session management ID" msgstr "Odredite ID upravljanja sesijama" #: ../src/core/main.c:274 msgid "X Display to use" msgstr "Koji X Display da koristim" #: ../src/core/main.c:280 msgid "Initialize session from savefile" msgstr "Inicijaliziraj sesiju iz spremljene datoteke" #: ../src/core/main.c:286 msgid "Print version" msgstr "Inačica za ispis" #: ../src/core/main.c:292 msgid "Make X calls synchronous" msgstr "Izvršavaj X pozive sinkrono" #: ../src/core/main.c:298 msgid "Turn compositing on" msgstr "Uključi kompoziciju" #: ../src/core/main.c:304 msgid "Turn compositing off" msgstr "Isključi kompoziciju" #: ../src/core/main.c:310 msgid "" "Don't make fullscreen windows that are maximized and have no decorations" msgstr "Nemojte napraviti cijeli ekran koji je povećan i bez ukrasa." #: ../src/core/main.c:511 #, c-format msgid "Failed to scan themes directory: %s\n" msgstr "Nisam uspio pretražiti mapu tema: %s\n" #: ../src/core/main.c:527 #, c-format msgid "" "Could not find a theme! Be sure %s exists and contains the usual themes.\n" msgstr "" "Nije moguće naći temu! Provjerite postoji li %s i sadrži li uobičajene " "teme.\n" #: ../src/core/main.c:586 #, c-format msgid "Failed to restart: %s\n" msgstr "Nije uspjelo ponovno pokretanje: %s\n" #: ../src/core/prefs.c:953 msgid "" "Workarounds for broken applications disabled. Some applications may not " "behave properly.\n" msgstr "" "Kompromisi za loše programe su isključeni. Neki programi se mogu ponašati " "čudno.\n" #: ../src/core/prefs.c:1024 #, c-format msgid "Could not parse font description \"%s\" from GSettings key %s\n" msgstr "Nemoguće obraditi opis slova \"%s\" s GSettings ključa %s\n" #: ../src/core/prefs.c:1091 #, c-format msgid "" "\"%s\" found in configuration database is not a valid value for mouse button " "modifier\n" msgstr "" "“%s“ je pronađen u bazi podešavanja što nije ispravna vrijednost za tipku " "koja mijenja ponašanje tipki miša\n" #: ../src/core/prefs.c:1587 #, c-format msgid "" "\"%s\" found in configuration database is not a valid value for keybinding " "\"%s\"\n" msgstr "" "\"%s\" nađen u bazi postavki nije ispravna kombinacija tipki \"%s\"\n" #: ../src/core/prefs.c:1689 #, c-format msgid "Workspace %d" msgstr "Radna površina %d" #: ../src/core/prefs.c:1946 #, c-format msgid "Missing %s extension required for compositing\n" msgstr "Nedostajući %s priključak je potreban za kompozitiranje\n" #: ../src/core/screen.c:364 #, c-format msgid "Screen %d on display '%s' is invalid\n" msgstr "Ekran %d na prikazu '%s' nije ispravan\n" #: ../src/core/screen.c:380 #, c-format msgid "" "Screen %d on display \"%s\" already has a window manager; try using the --" "replace option to replace the current window manager.\n" msgstr "" "Ekran %d na prikazu \"%s\" već ima upravljača prozora; pokušajte koristiti --" "replace opciju kako bi zamijenili trenutni upravljač prozora.\n" #: ../src/core/screen.c:407 #, c-format msgid "" "Could not acquire window manager selection on screen %d display \"%s\"\n" msgstr "" "Nije moguće ostvariti odabir upravitelja prozora na ekranu %d prikaza " "\"%s\"\n" #: ../src/core/screen.c:465 #, c-format msgid "Screen %d on display \"%s\" already has a window manager\n" msgstr "Ekran %d na prikazu \"%s\" već ima upravljač prozora\n" #: ../src/core/screen.c:678 #, c-format msgid "Could not release screen %d on display \"%s\"\n" msgstr "Nije moguće otpustiti ekran %d na prikazu \"%s\"\n" #: ../src/core/session.c:842 ../src/core/session.c:849 #, c-format msgid "Could not create directory '%s': %s\n" msgstr "Nije moguće stvoriti mapu '%s': %s\n" #: ../src/core/session.c:859 #, c-format msgid "Could not open session file '%s' for writing: %s\n" msgstr "Nije moguće otvoriti datoteku '%s' za zapisivanje: %s\n" #: ../src/core/session.c:1000 #, c-format msgid "Error writing session file '%s': %s\n" msgstr "Pogreška zapisivanja datoteke sesije '%s': %s\n" #: ../src/core/session.c:1005 #, c-format msgid "Error closing session file '%s': %s\n" msgstr "Greška pri zatvaranju session datoteke '%s': %s\n" #: ../src/core/session.c:1135 #, c-format msgid "Failed to parse saved session file: %s\n" msgstr "Ne uspješno raščlanjivanje snimljene datoteke sesije: %s\n" #: ../src/core/session.c:1184 #, c-format msgid " attribute seen but we already have the session ID" msgstr " atribut opažen ali već imamo ID sesije" #: ../src/core/session.c:1197 ../src/core/session.c:1272 #: ../src/core/session.c:1304 ../src/core/session.c:1376 #: ../src/core/session.c:1436 #, c-format msgid "Unknown attribute %s on <%s> element" msgstr "Nepoznat atribut %s na elementu <%s>" #: ../src/core/session.c:1214 #, c-format msgid "nested tag" msgstr "ugniježden tag" #: ../src/core/session.c:1456 #, c-format msgid "Unknown element %s" msgstr "Nepoznati element %s" #: ../src/core/session.c:1812 msgid "" "These windows do not support "save current setup" and will have to " "be restarted manually next time you log in." msgstr "" "Ovi prozori ne podržavaju "spremi trenutne postavke" i morati će " "se ručno pokrenuti sljedeći put kad se prijavite." #: ../src/core/util.c:99 #, c-format msgid "Failed to open debug log: %s\n" msgstr "Nije uspjelo otvaranje zapisnika o ispravku grešaka: %s\n" #: ../src/core/util.c:109 #, c-format msgid "Failed to fdopen() log file %s: %s\n" msgstr "Neuspjelo fdopen() datoteke zapisa%s: %s\n" #: ../src/core/util.c:115 #, c-format msgid "Opened log file %s\n" msgstr "Otvorena zapisnička datoteka %s\n" #: ../src/core/util.c:134 ../src/tools/metacity-message.c:206 #, c-format msgid "Metacity was compiled without support for verbose mode\n" msgstr "Metacity je kompajliran bez podrške za opširan način rada\n" #: ../src/core/util.c:234 msgid "Window manager: " msgstr "Upravitelj prozora: " #: ../src/core/util.c:388 msgid "Bug in window manager: " msgstr "Greška u upravitelju prozora: " #: ../src/core/util.c:421 msgid "Window manager warning: " msgstr "Upozorenje upravitelja prozora: " #: ../src/core/util.c:449 msgid "Window manager error: " msgstr "Greška upravitelja prozora: " #. Translators: This is the title used on dialog boxes #: ../src/core/util.c:568 ../src/metacity.desktop.in.h:1 #: ../src/metacity-wm.desktop.in.h:1 msgid "Metacity" msgstr "Metacity" #. first time through #: ../src/core/window.c:5936 #, c-format msgid "" "Window %s sets SM_CLIENT_ID on itself, instead of on the WM_CLIENT_LEADER " "window as specified in the ICCCM.\n" msgstr "" "Prozor %s je postavio SM_CLIENT_ID na samog sebe umjesto na prozor " "WM_CLIENT_LEADER kao što je navedeno u ICCCM.\n" #. We ignore mwm_has_resize_func because WM_NORMAL_HINTS is the #. * authoritative source for that info. Some apps such as mplayer or #. * xine disable resize via MWM but not WM_NORMAL_HINTS, but that #. * leads to e.g. us not fullscreening their windows. Apps that set #. * MWM but not WM_NORMAL_HINTS are basically broken. We complain #. * about these apps but make them work. #. #: ../src/core/window.c:6419 #, c-format msgid "" "Window %s sets an MWM hint indicating it isn't resizable, but sets min size " "%d x %d and max size %d x %d; this doesn't make much sense.\n" msgstr "" "Prozor %s je postavio MWM što nagovještava da nije promjenjljive veličine, " "ali je postavio minimalnu veličinu %d x %d i maksimalnu veličinu %d x %d što " "nema mnogo smisla.\n" #: ../src/core/window-props.c:403 #, c-format msgid "Application set a bogus _NET_WM_PID %lu\n" msgstr "Program je postavio neispravan NET_WM_PID %lu\n" #. Translators: the title of a window from another machine #: ../src/core/window-props.c:554 #, c-format msgid "%s (on %s)" msgstr "%s (na %s)" #. Simple case-- don't bother to look it up. It's root. #: ../src/core/window-props.c:586 #, c-format msgid "%s (as superuser)" msgstr "%s (kao super korisnik)" #. Translators: the title of a window owned by another user #. * on this machine #: ../src/core/window-props.c:604 #, c-format msgid "%s (as %s)" msgstr "%s (kao %s)" #. Translators: the title of a window owned by another user #. * on this machine, whose name we don't know #: ../src/core/window-props.c:610 #, c-format msgid "%s (as another user)" msgstr "%s (kao drugi korisnik)" #: ../src/core/window-props.c:1590 #, c-format msgid "Invalid WM_TRANSIENT_FOR window 0x%lx specified for %s.\n" msgstr "Neispravan WM_TRANSIENT_FOR prozor 0x%lx specificiran za %s.\n" #: ../src/core/xprops.c:153 #, c-format msgid "" "Window 0x%lx has property %s\n" "that was expected to have type %s format %d\n" "and actually has type %s format %d n_items %d.\n" "This is most likely an application bug, not a window manager bug.\n" "The window has title=\"%s\" class=\"%s\" name=\"%s\"\n" msgstr "" "Prozor 0x%lx ima osobinu %s\n" "tako da je očekivano da ima tip %s format %d,\n" "a zapravo ima tip %s format %d n_items %d.\n" "Ovo je najverovatnije greška u programu, a ne u menadžeru prozora.\n" "Prozor ima naslov=\"%s\" klasa=\"%s\" ime=\"%s\"\n" #: ../src/core/xprops.c:409 #, c-format msgid "Property %s on window 0x%lx contained invalid UTF-8\n" msgstr "Svojstvo %s na prozoru 0x%lx je sadržalo neispravni UTF-8\n" #: ../src/core/xprops.c:492 #, c-format msgid "" "Property %s on window 0x%lx contained invalid UTF-8 for item %d in the list\n" msgstr "" "Svojstvo %s na prozoru 0x%lx sadrži neispravni UTF-8 za predmet %d na " "popisu\n" #: ../src/org.gnome.metacity.gschema.xml.in.h:1 msgid "Compositing Manager" msgstr "Kompozitni upravitelj" #: ../src/org.gnome.metacity.gschema.xml.in.h:2 msgid "Determines whether Metacity is a compositing manager." msgstr "Određuje li je Metacity kompozitni upravitelj." #: ../src/org.gnome.metacity.gschema.xml.in.h:3 msgid "If true, trade off usability for less resource usage" msgstr "" "Ako je postavljeno, mijenja se iskoristivost za manje korištenje resursa" #: ../src/org.gnome.metacity.gschema.xml.in.h:4 msgid "" "If true, Metacity will give the user less feedback by using wireframes, " "avoiding animations, or other means. This is a significant reduction in " "usability for many users, but may allow legacy applications to continue " "working, and may also be a useful tradeoff for terminal servers. However, " "the wireframe feature is disabled when accessibility is on." msgstr "" #: ../src/org.gnome.metacity.gschema.xml.in.h:5 msgid "Enable edge tiling when dropping windows on screen edges" msgstr "" "Omogući rubno popločavanje pri ispuštanju prozora na rubovima zaslona" #: ../src/org.gnome.metacity.gschema.xml.in.h:6 msgid "" "If enabled, dropping windows on vertical screen edges maximizes them " "vertically and resizes them horizontally to cover half of the available " "area. Dropping windows on the top screen edge maximizes them completely." msgstr "" "Ako je omogućeno, ispuštanje prozora na okomitim rubovima zaslona uveća ih " "okomito i rasteže vodoravno do polovice dostupnog područja. Ispuštanje " "prozora na gornjem rubu zaslona uvećava prozor u potpunosti." #: ../src/org.gnome.metacity.gschema.xml.in.h:7 msgid "Window placement behavior" msgstr "Ponašanje namještanja prozora" #: ../src/org.gnome.metacity.gschema.xml.in.h:8 msgid "" "Metacity's default window-placement behavior is smart (first-fit), similar " "to behaviors in some other window managers. It will try to tile windows so " "that they do not overlap. Set this option to \"smart\" for this behavior. " "This option can be set to \"center\" to place new windows in the centers of " "their workspaces, \"origin\" for the upper-left corners of the workspaces, " "or \"random\" to place new windows at random locations within their " "workspaces." msgstr "" "Metacitjevo uobičajeno ponašanje namještanja prozora je pametno (first-fit), " "slično ponašanjima u nekim drugim upraviteljima prozora. Pokušat će " "popločiti prozore tako da se ne preklapaju. Za ovakvo ponašanje postavite " "ovu mogućnosti na \"pametno\". Ova mogućnost može biti postavljena na " "\"sredina\" kako bi smjestila novi prozor na sredinu radne površine, " "\"izvorno\" za gornje lijeve kuteve radnih površina, ili \"naizmjenično\" za " "stavljanje novih prozora na naizmjenično odabrane lokacije na radnim " "površinama." #: ../src/org.gnome.metacity.gschema.xml.in.h:9 msgid "Show window content thumbnail in Alt-Tab" msgstr "Prikaži minijaturu sadržaja protora u Alt-Tab" #: ../src/org.gnome.metacity.gschema.xml.in.h:10 msgid "" "If set to true, Metacity will show window content thumbnails in the Alt-Tab " "window instead of only icons." msgstr "" "Ako je omogućeno, Metacity će prikazati minijaturu sadržaja prozora u Alt-" "Tab prozoru umjesto samo ikona." #: ../src/org.gnome.metacity.gschema.xml.in.h:11 msgid "Current theme" msgstr "Trenutna tema" #: ../src/org.gnome.metacity.gschema.xml.in.h:12 msgid "" "The theme determines the appearance of window borders, titlebar, and so " "forth." msgstr "" "Tema utvrđuje izgled rubova prozora, naslovne linije i svega ostalog sličnog." #: ../src/tools/metacity-message.c:176 #, c-format msgid "Usage: %s\n" msgstr "Uporaba: %s\n" #: ../src/ui/frames.c:1299 msgid "Close Window" msgstr "Zatvori prozor" #: ../src/ui/frames.c:1302 msgid "Window Menu" msgstr "Izbornik prozora" #: ../src/ui/frames.c:1305 msgid "Window App Menu" msgstr "Prozor izbornika aplikacije" #: ../src/ui/frames.c:1308 msgid "Minimize Window" msgstr "Minimiziraj prozor" #: ../src/ui/frames.c:1311 msgid "Maximize Window" msgstr "Maksimiziraj prozor" #: ../src/ui/frames.c:1314 msgid "Restore Window" msgstr "Povrati prozor." #: ../src/ui/frames.c:1317 msgid "Roll Up Window" msgstr "Namotaj prozor" #: ../src/ui/frames.c:1320 msgid "Unroll Window" msgstr "Odmotaj prozor" #: ../src/ui/frames.c:1323 msgid "Keep Window On Top" msgstr "Drži prozor na vrhu" #: ../src/ui/frames.c:1326 msgid "Remove Window From Top" msgstr "Ukloni prozor s vrha" #: ../src/ui/frames.c:1329 msgid "Always On Visible Workspace" msgstr "Uvijek na vidljivoj radnoj površini" #: ../src/ui/frames.c:1332 msgid "Put Window On Only One Workspace" msgstr "Postavi prozor na samo jednu radnu površinu" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:65 msgid "Mi_nimize" msgstr "Mi_nimiziraj" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:67 msgid "Ma_ximize" msgstr "_Maksimiziraj" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:69 msgid "Unma_ximize" msgstr "_Vrati s maksimiziranog" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:71 msgid "Roll _Up" msgstr "Zam_otaj" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:73 msgid "_Unroll" msgstr "_Odmotaj" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:75 msgid "_Move" msgstr "_Premjesti" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:77 msgid "_Resize" msgstr "Promjena ve_ličine" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:79 msgid "Move Titlebar On_screen" msgstr "Premjesti traku naslova na _zaslon" #. separator #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:82 ../src/ui/menu.c:84 msgid "Always on _Top" msgstr "_Uvijek na vrhu" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:86 msgid "_Always on Visible Workspace" msgstr "_Uvijek na vidljivoj u radnoj površini" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:88 msgid "_Only on This Workspace" msgstr "Samo na _ovoj radnoj površini" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:90 msgid "Move to Workspace _Left" msgstr "Pomakni na lij_evu radnu površinu" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:92 msgid "Move to Workspace R_ight" msgstr "Pomakn_i na desnu radnu površinu" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:94 msgid "Move to Workspace _Up" msgstr "Pomakni na _gornju radnu površinu" #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:96 msgid "Move to Workspace _Down" msgstr "Pomakni na _donju radnu površinu" #. separator #. Translators: Translate this string the same way as you do in libwnck! #: ../src/ui/menu.c:100 msgid "_Close" msgstr "_Zatvori" #: ../src/ui/menu.c:200 #, c-format msgid "Workspace %d%n" msgstr "Radni prostor %d%n" #: ../src/ui/menu.c:210 #, c-format msgid "Workspace 1_0" msgstr "Radna površina 1_0" #: ../src/ui/menu.c:212 #, c-format msgid "Workspace %s%d" msgstr "Radna površina %s%d" #: ../src/ui/menu.c:379 msgid "Move to Another _Workspace" msgstr "Pomakni na drugu _radnu površinu" #. This is the text that should appear next to menu accelerators #. * that use the shift key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:75 msgid "Shift" msgstr "Shift" #. This is the text that should appear next to menu accelerators #. * that use the control key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:81 msgid "Ctrl" msgstr "Ctrl" #. This is the text that should appear next to menu accelerators #. * that use the alt key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:87 msgid "Alt" msgstr "Alt" #. This is the text that should appear next to menu accelerators #. * that use the meta key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:93 msgid "Meta" msgstr "Meta" #. This is the text that should appear next to menu accelerators #. * that use the super key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:99 msgid "Super" msgstr "Super" #. This is the text that should appear next to menu accelerators #. * that use the hyper key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:105 msgid "Hyper" msgstr "Hiper" #. This is the text that should appear next to menu accelerators #. * that use the mod2 key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:111 msgid "Mod2" msgstr "Mod2" #. This is the text that should appear next to menu accelerators #. * that use the mod3 key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:117 msgid "Mod3" msgstr "Mod3" #. This is the text that should appear next to menu accelerators #. * that use the mod4 key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:123 msgid "Mod4" msgstr "Mod4" #. This is the text that should appear next to menu accelerators #. * that use the mod5 key. If the text on this key isn't typically #. * translated on keyboards used for your language, don't translate #. * this. #. #: ../src/ui/metaaccellabel.c:129 msgid "Mod5" msgstr "Mod5" #. Translators: This represents the size of a window. The first number is #. * the width of the window and the second is the height. #. #: ../src/ui/resizepopup.c:139 #, c-format msgid "%d x %d" msgstr "%d x %d" #: ../src/ui/theme.c:268 msgid "top" msgstr "na vrh" #: ../src/ui/theme.c:270 msgid "bottom" msgstr "na dno" #: ../src/ui/theme.c:272 msgid "left" msgstr "lijevo" #: ../src/ui/theme.c:274 msgid "right" msgstr "desno" #: ../src/ui/theme.c:301 #, c-format msgid "frame geometry does not specify \"%s\" dimension" msgstr "geometrija okvira ne navodi „%s“ dimenziju" #: ../src/ui/theme.c:320 #, c-format msgid "frame geometry does not specify dimension \"%s\" for border \"%s\"" msgstr "geometrija okvira ne navodi „%s“ dimenziju za rub „%s“" #: ../src/ui/theme.c:357 #, c-format msgid "Button aspect ratio %g is not reasonable" msgstr "Odnos gumb %g nije razuman" #: ../src/ui/theme.c:370 #, c-format msgid "Frame geometry does not specify size of buttons" msgstr "Geometrija oblika nije odredila veličinu dugmadi." #: ../src/ui/theme.c:1304 #, c-format msgid "Gradients should have at least two colors" msgstr "Stupnjevanje mora imati barem dvije boje" #: ../src/ui/theme.c:1448 #, c-format msgid "" "GTK custom color specification must have color name and fallback in " "parentheses, e.g. gtk:custom(foo,bar); could not parse \"%s\"" msgstr "" #: ../src/ui/theme.c:1464 #, c-format msgid "" "Invalid character '%c' in color_name parameter of gtk:custom, only A-Za-z0-9-" "_ are valid" msgstr "" "Neispravan znak '%c' u parametru naziv_boje od gtk:custom, samo A-Za-z0-9-_ " "su valjani" #: ../src/ui/theme.c:1478 #, c-format msgid "" "Gtk:custom format is \"gtk:custom(color_name,fallback)\", \"%s\" does not " "fit the format" msgstr "" "Gtk:custom format je \"gtk:custom(color_name,fallback)\", \"%s\" ne pristaje " "format" #: ../src/ui/theme.c:1522 #, c-format msgid "" "GTK color specification must have the state in brackets, e.g. gtk:fg[NORMAL] " "where NORMAL is the state; could not parse \"%s\"" msgstr "" "GTK specifikacija boje mora imati stanje u zagradi, npr. gtk:fg[NORMAL] gdje " "je NORMAL stanje; nije moguće analizirati \"%s\"" #: ../src/ui/theme.c:1536 #, c-format msgid "" "GTK color specification must have a close bracket after the state, e.g. " "gtk:fg[NORMAL] where NORMAL is the state; could not parse \"%s\"" msgstr "" "GTK specifikacija boje mora imati zatvorenu zagradu poslije stanja,naprimjer " " gtk:fg[NORMAL] gdje je NORMAL stanje;nije moguće analizirati \"%s\"" #: ../src/ui/theme.c:1547 #, c-format msgid "Did not understand state \"%s\" in color specification" msgstr "Nisam shvatio stanje \"%s\" u odredbama boja" #: ../src/ui/theme.c:1560 #, c-format msgid "Did not understand color component \"%s\" in color specification" msgstr "Ne razumijem komponentu boje \"%s\" u specifikaciji boja" #: ../src/ui/theme.c:1588 #, c-format msgid "" "Blend format is \"blend/bg_color/fg_color/alpha\", \"%s\" does not fit the " "format" msgstr "" "Format miješanja „blend/bg_color/fg_color/alpha“, „%s“ se ne uklapa u " "traženi format zapisa" #: ../src/ui/theme.c:1599 #, c-format msgid "Could not parse alpha value \"%s\" in blended color" msgstr "Nije moguće obraditi alfa vrijednost \"%s\" u nijansi boje" #: ../src/ui/theme.c:1609 #, c-format msgid "Alpha value \"%s\" in blended color is not between 0.0 and 1.0" msgstr "Alfa vrijednost \"%s\" u nijansiranoj boji nije između 0.0 i 1.0" #: ../src/ui/theme.c:1655 #, c-format msgid "" "Shade format is \"shade/base_color/factor\", \"%s\" does not fit the format" msgstr "" "Format osjenčenja je \"shade/base_color/factor\", \"%s\" ne odgovara formatu" #: ../src/ui/theme.c:1666 #, c-format msgid "Could not parse shade factor \"%s\" in shaded color" msgstr "Nije moguće analizirati faktor sjenčanja \"%s\" u sjenčanim bojama" #: ../src/ui/theme.c:1676 #, c-format msgid "Shade factor \"%s\" in shaded color is negative" msgstr "Faktor sjenčanja \"%s\" u zasjenjenoj boji je negativan" #: ../src/ui/theme.c:1705 #, c-format msgid "Could not parse color \"%s\"" msgstr "Nije moguće analizirati boju \"%s\"" #: ../src/ui/theme.c:2058 #, c-format msgid "Coordinate expression contains character '%s' which is not allowed" msgstr "Izraz koordinacije sadrži znak '%s' koji nije dozvoljen" #: ../src/ui/theme.c:2085 #, c-format msgid "" "Coordinate expression contains floating point number '%s' which could not be " "parsed" msgstr "" "Izraz koordinacije sadrži broj sa pokretnom točkom '%s' koji nije mogao biti " "analiziran" #: ../src/ui/theme.c:2099 #, c-format msgid "Coordinate expression contains integer '%s' which could not be parsed" msgstr "" "Izraz koordinacije sadrži cijeli broj '%s' koji neje mogao biti analiziran" #: ../src/ui/theme.c:2221 #, c-format msgid "" "Coordinate expression contained unknown operator at the start of this text: " "\"%s\"" msgstr "" "Izraz koordinacije sadrži nepoznati operator na početku ovog teksta \"%s\"" #: ../src/ui/theme.c:2278 #, c-format msgid "Coordinate expression was empty or not understood" msgstr "Izraz koordinacije je bio prazan ili nije shvatio" #: ../src/ui/theme.c:2389 ../src/ui/theme.c:2399 ../src/ui/theme.c:2434 #, c-format msgid "Coordinate expression results in division by zero" msgstr "Izraz koordinata je rezultat podjele sa nulom" #: ../src/ui/theme.c:2442 #, c-format msgid "" "Coordinate expression tries to use mod operator on a floating-point number" msgstr "" "Izraz koordinacije pokušava upotrijebiti mod operator na broju sa pomičnim " "zarezom" #: ../src/ui/theme.c:2499 #, c-format msgid "" "Coordinate expression has an operator \"%s\" where an operand was expected" msgstr "Izraz koordinacije ima operator \"%s\" gdje se očekivao operand" #: ../src/ui/theme.c:2508 #, c-format msgid "Coordinate expression had an operand where an operator was expected" msgstr "Izraz koordinacije je imao operand a očekivao se operator" #: ../src/ui/theme.c:2516 #, c-format msgid "Coordinate expression ended with an operator instead of an operand" msgstr "Izraz koordinacije je završio sa operatorom umjesto operanda" #: ../src/ui/theme.c:2526 #, c-format msgid "" "Coordinate expression has operator \"%c\" following operator \"%c\" with no " "operand in between" msgstr "" "Izraz koordinacije ima operator \"%c\" koji prati operator \"%c\" ali bez " "operacija između" #: ../src/ui/theme.c:2685 ../src/ui/theme.c:2730 #, c-format msgid "Coordinate expression had unknown variable or constant \"%s\"" msgstr "Izraz koordinacije je imao nepoznatu varijablu ili konstantu \"%s\"" #: ../src/ui/theme.c:2784 #, c-format msgid "Coordinate expression parser overflowed its buffer." msgstr "Kod pregledavanja koordinata došlo je do prekoračenja spremnika" #: ../src/ui/theme.c:2813 #, c-format msgid "" "Coordinate expression had a close parenthesis with no open parenthesis" msgstr "" "Izraz koordinacije je morao zatvoriti zagrade sa ne otvorenim zagradama." #: ../src/ui/theme.c:2882 #, c-format msgid "" "Coordinate expression had an open parenthesis with no close parenthesis" msgstr "" "Izraz koordinacije je imao otvorene zagrade sa ne zatvorenim zagradama" #: ../src/ui/theme.c:2893 #, c-format msgid "Coordinate expression doesn't seem to have any operators or operands" msgstr "Izraz koordinacije izgleda ne sadrži operacije ili operande." #: ../src/ui/theme.c:3098 ../src/ui/theme.c:3118 ../src/ui/theme.c:3138 #, c-format msgid "Theme contained an expression that resulted in an error: %s\n" msgstr "Tema je sadržavala izraz koji je uzrokovao grešku: %s\n" #: ../src/ui/theme.c:4797 #, c-format msgid "" "