language-pack-nds-base/0000755000000000000000000000000012734303026012135 5ustar language-pack-nds-base/debian/0000755000000000000000000000000012734303026013357 5ustar language-pack-nds-base/debian/rules0000755000000000000000000000165312734303026014444 0ustar #!/usr/bin/make -f # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 PKGNAME=$(shell grep "^Package: " debian/control | head -1 | cut -f 2 -d\ ) PKG=$(shell pwd)/debian/$(PKGNAME) LOCALEDIR=$(PKG)/usr/share/locale-langpack build: dh_testdir clean: dh_testdir dh_testroot dh_clean binary-arch: binary-indep: dh_testdir dh_testroot mkdir -p $(LOCALEDIR) cd data; \ find -type d -exec mkdir -p "$(LOCALEDIR)/{}" \; ; \ find -type f -name "*.po" -exec sh -c "N='{}'; msgfmt -o $(LOCALEDIR)/\$${N%.po}.mo \$$N" \; ; \ [ ! -e data/extra.tar ] || tar -C $(PKG) -xf data/extra.tar [ ! -e data/static.tar ] || tar -C $(PKG) -xf data/static.tar dh_installdocs -i dh_installchangelogs -i dh_compress -i dh_fixperms -i dh_installdeb -i dh_gencontrol -i dh_md5sums -i dh_builddeb -i -- -Z xz binary: binary-arch binary-indep .PHONY: build build-arch build-indep clean binary-indep binary-arch binary language-pack-nds-base/debian/postinst0000644000000000000000000000021112734303026015157 0ustar #!/bin/sh -e if [ "$1" = "configure" ]; then /usr/share/locales/install-language-pack "nds" "" "$2" || true fi #DEBHELPER# exit 0 language-pack-nds-base/debian/control0000644000000000000000000000212512734303026014762 0ustar Source: language-pack-nds-base Section: translations Priority: optional Maintainer: Language pack maintainers Build-Depends-Indep: gettext Build-Depends: debhelper (>= 8) Standards-Version: 3.9.6 Package: language-pack-nds-base Architecture: all Pre-Depends: dpkg (>= 1.16.1), ${misc:Pre-Depends} Depends: ${misc:Depends}, locales (>= 2.3.6), language-pack-nds (>= ${binary:Version}) Recommends: Conflicts: language-pack-nds (<< ${binary:Version}) Replaces: language-pack-nds (<< ${binary:Version}), language-pack-nds-base (<< ${binary:Version}), language-pack-nds (<< ${binary:Version}), language-pack-gnome-nds (<< ${binary:Version}), language-pack-gnome-nds-base (<< ${binary:Version}), language-pack-kde-nds (<< ${binary:Version}), language-pack-kde-nds-base (<< ${binary:Version}) Description: translations for language German, Low Translation data for all supported packages for: German, Low . This package provides the bulk of translation data and is updated only seldom. language-pack-nds provides frequent translation updates, so you should install this as well. language-pack-nds-base/debian/copyright0000644000000000000000000000174312734303026015317 0ustar This package is developed and maintained by the Ubuntu language pack maintainers . The original source can always be found at: http://archive.ubuntu.com/ubuntu/ Copyright (C) 2004 - 2008 Canonical Ltd. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . On Debian systems, the complete text of the GNU General Public License can be found in `/usr/share/common-licenses/GPL'. language-pack-nds-base/debian/compat0000644000000000000000000000000212734303026014555 0ustar 8 language-pack-nds-base/debian/postrm0000644000000000000000000000020512734303026014623 0ustar #!/bin/sh -e if [ "$1" = "remove" ]; then /usr/share/locales/remove-language-pack "nds" "" "$2" || true fi #DEBHELPER# exit 0 language-pack-nds-base/debian/changelog0000644000000000000000000000030712734303026015231 0ustar language-pack-nds-base (1:16.04+20160627) xenial-proposed; urgency=low * Initial Release. -- Ubuntu automatic language-pack builder Mon, 27 Jun 2016 20:01:26 +0000 language-pack-nds-base/debian/source/0000755000000000000000000000000012734303026014657 5ustar language-pack-nds-base/debian/source/format0000644000000000000000000000001512734303026016066 0ustar 3.0 (native) language-pack-nds-base/data/0000755000000000000000000000000012734303740013051 5ustar language-pack-nds-base/data/extra.tar0000644000000000000000000002400012734303026014675 0ustar var/lib/locales/supported.d/nds0000644000373100047300000000003212734303026020373 0ustar langpacklangpack00000000000000nds_DE UTF-8 nds_NL UTF-8 language-pack-nds-base/data/nds/0000755000000000000000000000000012734303740013635 5ustar language-pack-nds-base/data/nds/LC_MESSAGES/0000755000000000000000000000000012734303743015425 5ustar language-pack-nds-base/data/nds/LC_MESSAGES/checkbox.po0000644000000000000000000047132212734303740017561 0ustar # German, Low translation for checkbox # Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009 # This file is distributed under the same license as the checkbox package. # FIRST AUTHOR , 2009. # msgid "" msgstr "" "Project-Id-Version: checkbox\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2014-01-27 17:46+0000\n" "PO-Revision-Date: 2009-10-27 15:40+0000\n" "Last-Translator: KaDaWa \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 18:34+0000\n" "X-Generator: Launchpad (build 18115)\n" #. Title of the user interface #: ../qt/checkbox-qt.desktop.in.h:1 ../plugins/user_interface.py:43 msgid "System Testing" msgstr "" #: ../gtk/checkbox-gtk.ui.h:2 ../checkbox_gtk/gtk_interface.py:561 msgid "_Test" msgstr "" #: ../gtk/checkbox-gtk.ui.h:3 msgid "_Yes" msgstr "" #: ../gtk/checkbox-gtk.ui.h:4 msgid "_No" msgstr "" #: ../gtk/checkbox-gtk.ui.h:5 msgid "_Skip this test" msgstr "" #: ../checkbox_cli/cli_interface.py:460 msgid "Further information:" msgstr "Weitere Informationen:" #: ../gtk/checkbox-gtk.ui.h:7 msgid "_Select All" msgstr "" #: ../gtk/checkbox-gtk.ui.h:8 msgid "_Deselect All" msgstr "" #: ../gtk/checkbox-gtk.ui.h:9 msgid "_Previous" msgstr "" #: ../gtk/checkbox-gtk.ui.h:10 msgid "Ne_xt" msgstr "" #: ../qt/checkbox-qt.desktop.in.h:2 msgid "Test your system and submit results to Launchpad" msgstr "" #. description #: ../jobs/audio.txt.in:8 msgid "Test to detect audio devices" msgstr "" #. description #: ../jobs/audio.txt.in:20 msgid "" "PURPOSE:\n" " This test will check that internal speakers work correctly\n" "STEPS:\n" " 1. Make sure that no external speakers or headphones are connected\n" " If testing a desktop, external speakers are allowed\n" " 2. Click the Test button to play a brief tone on your audio device\n" "VERIFICATION:\n" " Did you hear a tone?" msgstr "" #. description #: ../jobs/audio.txt.in:40 msgid "" "PURPOSE:\n" " HDMI audio interface verification\n" "STEPS:\n" " 1. Plug an external HDMI device with sound (Use only one " "HDMI/DisplayPort interface at a time for this test)\n" " 2. Click the Test button\n" "VERIFICATION:\n" " Did you hear the sound from the HDMI device?" msgstr "" #. description #: ../jobs/audio.txt.in:59 msgid "" "PURPOSE:\n" " DisplayPort audio interface verification\n" "STEPS:\n" " 1. Plug an external DisplayPort device with sound (Use only one " "HDMI/DisplayPort interface at a time for this test)\n" " 2. Click the Test button\n" "VERIFICATION:\n" " Did you hear the sound from the DisplayPort device?" msgstr "" #. description #: ../jobs/audio.txt.in:78 msgid "" "PURPOSE:\n" " This test will check that headphones connector works correctly\n" "STEPS:\n" " 1. Connect a pair of headphones to your audio device\n" " 2. Click the Test button to play a sound to your audio device\n" "VERIFICATION:\n" " Did you hear a sound through the headphones and did the sound play " "without any distortion, clicks or other strange noises from your headphones?" msgstr "" #. description #: ../jobs/audio.txt.in:97 msgid "" "PURPOSE:\n" " This test will check that recording sound using the onboard microphone " "works correctly\n" "STEPS:\n" " 1. Disconnect any external microphones that you have plugged in\n" " 2. Click \"Test\", then speak into your internal microphone\n" " 3. After a few seconds, your speech will be played back to you.\n" "VERIFICATION:\n" " Did you hear your speech played back?" msgstr "" #. description #: ../jobs/audio.txt.in:117 msgid "" "PURPOSE:\n" " This test will check that recording sound using an external microphone " "works correctly\n" "STEPS:\n" " 1. Connect a microphone to your microphone port\n" " 2. Click \"Test\", then speak into the external microphone\n" " 3. After a few seconds, your speech will be played back to you\n" "VERIFICATION:\n" " Did you hear your speech played back?" msgstr "" #. description #: ../jobs/audio.txt.in:135 msgid "" "PURPOSE:\n" " This test will check that a USB audio device works correctly\n" "STEPS:\n" " 1. Connect a USB audio device to your system\n" " 2. Click \"Test\", then speak into the microphone\n" " 3. After a few seconds, your speech will be played back to you\n" "VERIFICATION:\n" " Did you hear your speech played back through the USB headphones?" msgstr "" #. description #: ../jobs/audio.txt.in:149 msgid "" "Play back a sound on the default output and listen for it on the default " "input." msgstr "" #. description #: ../jobs/audio.txt.in:165 msgid "" "Collect audio-related system information. This data can be used to simulate " "this computer's audio subsystem and perform more detailed tests under a " "controlled environment." msgstr "" #. description #: ../jobs/audio.txt.in:175 msgid "Attaches the audio hardware data collection log to the results." msgstr "" #. description #: ../jobs/audio.txt.in:182 msgid "" "PURPOSE:\n" " Check that the various audio channels are working properly\n" "STEPS:\n" " 1. Click the Test button\n" "VERIFICATION:\n" " You should clearly hear a voice from the different audio channels" msgstr "" #. description #: ../jobs/audio.txt.in:185 msgid "" "This test will verify that the volume levels are at an acceptable level on " "your local system. The test will validate that the volume is greater than " "or equal to minvol and less than or equal to maxvol for all sources (inputs) " "and sinks (outputs) recognized by PulseAudio. It will also validate that " "the active source and sink are not muted. You should not manually adjust " "the volume or mute before running this test." msgstr "" #. description #: ../jobs/audio.txt.in:208 msgid "" "PURPOSE:\n" " Check that external line out connection works correctly\n" "STEPS:\n" " 1. Insert cable to speakers (with built-in amplifiers) on the line out " "port\n" " 2. Open system sound preferences, 'Output' tab, select 'Line-out' on " "the connector list. Click the Test button\n" " 3. On the system sound preferences, select 'Internal Audio' on the " "device list and click 'Test Speakers' to check left and right channel\n" "VERIFICATION:\n" " 1. Do you hear a sound in the speakers? The internal speakers should " "*not* be muted automatically\n" " 2. Do you hear the sound coming out on the corresponding channel?" msgstr "" #. description #: ../jobs/audio.txt.in:228 msgid "" "PURPOSE:\n" " Check that external line in connection works correctly\n" "STEPS:\n" " 1. Use a cable to connect the line in port to an external line out " "source.\n" " 2. Open system sound preferences, 'Input' tab, select 'Line-in' on the " "connector list. Click the Test button\n" " 3. After a few seconds, your recording will be played back to you.\n" "VERIFICATION:\n" " Did you hear your recording?" msgstr "" #. description #: ../jobs/audio.txt.in:289 msgid "" "PURPOSE:\n" " Check that balance control works correctly on internal speakers\n" "STEPS:\n" " 1. Check that moving the balance slider from left to right works " "smoothly\n" " 2. Click the Test button to play an audio tone for 10 seconds.\n" " 3. Move the balance slider from left to right and back.\n" " 4. Check that actual speaker audio balance follows your setting.\n" "VERIFICATION:\n" " Does the slider move smoothly, as well as being followed by the setting " "by the actual audio output?" msgstr "" #. description #: ../jobs/audio.txt.in:310 msgid "" "PURPOSE:\n" " Check that balance control works correctly on external headphone\n" "STEPS:\n" " 1. Check that moving the balance slider from left to right works " "smoothly\n" " 2. Click the Test button to play an audio tone for 10 seconds.\n" " 3. Move the balance slider from left to right and back.\n" " 4. Check that actual headphone audio balance follows your setting.\n" "VERIFICATION:\n" " Does the slider move smoothly, as well as being followed by the setting " "by the actual audio output?" msgstr "" #. description #: ../jobs/benchmarks.txt.in:18 msgid "Benchmark for each disk" msgstr "" #. description #: ../jobs/benchmarks.txt.in:35 msgid "Run gtkperf to make sure that GTK based test cases work" msgstr "" #. description #: ../jobs/benchmarks.txt.in:43 msgid "Run Render-Bench XRender/Imlib2 benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:50 msgid "Run Qgears2 XRender Extension gearsfancy benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:57 msgid "Run Qgears2 XRender Extension image scaling benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:64 msgid "Run Qgears2 OpenGL gearsfancy benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:71 msgid "Run Qgears2 OpenGL image scaling benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:80 msgid "Run GLmark2-ES2 benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:90 msgid "Run GLmark2 benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:99 msgid "Run globs benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:105 msgid "Run Unigine Santuary benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:111 msgid "Run Unigine Tropics benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:117 msgid "Run Unigine Heaven benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:123 msgid "Run Lightsmark benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:129 msgid "Run Cachebench Read benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:135 msgid "Run Cachebench Write benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:141 msgid "Run Cachebench Read / Modify / Write benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:147 msgid "Run Stream Copy benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:153 msgid "Run Stream Scale benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:159 msgid "Run Stream Add benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:165 msgid "Run Stream Triad benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:172 msgid "Run Network Loopback benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:178 msgid "Check the time needed to reconnect to a WIFI access point" msgstr "" #. description #: ../jobs/benchmarks.txt.in:184 msgid "Run Encode MP3 benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:190 msgid "Run x264 H.264/AVC encoder benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:196 msgid "Run GnuPG benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:202 msgid "Run Compress PBZIP2 benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:208 msgid "Run Compress 7ZIP benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:214 msgid "Run N-Queens benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:220 msgid "Run Himeno benchmark" msgstr "" #. description #: ../jobs/benchmarks.txt.in:226 msgid "CPU utilization on an idle system." msgstr "" #. description #: ../jobs/benchmarks.txt.in:232 msgid "Disk utilization on an idle system." msgstr "" #. description #: ../jobs/benchmarks.txt.in:241 msgid "" "Run a stress test based on FurMark (OpenGL 2.1 or 3.2) Fullscreen 1920x1080 " "no antialiasing" msgstr "" #. description #: ../jobs/benchmarks.txt.in:252 msgid "" "Run a stress test based on FurMark (OpenGL 2.1 or 3.2) Windowed 1024x640 no " "antialiasing" msgstr "" #. description #: ../jobs/benchmarks.txt.in:263 msgid "" "Run GiMark, a geometry instancing test (OpenGL 3.3) Fullscreen 1920x1080 no " "antialiasing" msgstr "" #. description #: ../jobs/benchmarks.txt.in:274 msgid "" "Run GiMark, a geometry instancing test (OpenGL 3.3) Windowed 1024x640 no " "antialiasing" msgstr "" #. description #: ../jobs/benchmarks.txt.in:285 msgid "" "Run a tessellation test based on TessMark (OpenGL 4.0) Fullscreen 1920x1080 " "no antialiasing" msgstr "" #. description #: ../jobs/benchmarks.txt.in:295 msgid "" "Run a tessellation test based on TessMark (OpenGL 4.0) Windowed 1024x640 no " "antialiasing" msgstr "" #. description #: ../jobs/bluetooth.txt.in:23 msgid "" "Automated test to store bluetooth device information in checkbox report" msgstr "" #. description #: ../jobs/bluetooth.txt.in:30 msgid "" "PURPOSE:\n" " This test will check that bluetooth connection works correctly\n" "STEPS:\n" " 1. Enable bluetooth on any mobile device (PDA, smartphone, etc.)\n" " 2. Click on the bluetooth icon in the menu bar\n" " 3. Select 'Setup new device'\n" " 4. Look for the device in the list and select it\n" " 5. In the device write the PIN code automatically chosen by the wizard\n" " 6. The device should pair with the computer\n" " 7. Right-click on the bluetooth icon and select browse files\n" " 8. Authorize the computer to browse the files in the device if needed\n" " 9. You should be able to browse the files\n" "VERIFICATION:\n" " Did all the steps work?" msgstr "" #. description #: ../jobs/bluetooth.txt.in:50 msgid "" "PURPOSE:\n" " This test will check that you can transfer information through a " "bluetooth connection\n" "STEPS:\n" " 1. Make sure that you're able to browse the files in your mobile device\n" " 2. Copy a file from the computer to the mobile device\n" " 3. Copy a file from the mobile device to the computer\n" "VERIFICATION:\n" " Were all files copied correctly?" msgstr "" #. description #: ../jobs/bluetooth.txt.in:61 msgid "" "PURPOSE:\n" " This test will check that you can record and hear audio using a " "bluetooth audio device\n" "STEPS:\n" " 1. Enable the bluetooth headset\n" " 2. Click on the bluetooth icon in the menu bar\n" " 3. Select 'Setup new device'\n" " 4. Look for the device in the list and select it\n" " 5. In the device write the PIN code automatically chosen by the wizard\n" " 6. The device should pair with the computer\n" " 7. Click \"Test\" to record for five seconds and reproduce in the " "bluetooth device\n" "VERIFICATION:\n" " Did you hear the sound you recorded in the bluetooth" msgstr "" #. description #: ../jobs/bluetooth.txt.in:105 msgid "" "PURPOSE:\n" " This test will check that you can use a BlueTooth HID device\n" "STEPS:\n" " 1. Enable either a BT mouse or keyboard\n" " 2. Click on the bluetooth icon in the menu bar\n" " 3. Select 'Setup new device'\n" " 4. Look for the device in the list and select it\n" " 5. For mice, perform actions such as moving the pointer, right and left " "button clicks and double clicks\n" " 6. For keyboards, click the Test button to lauch a small tool. Enter " "some text into the tool and close it.\n" "VERIFICATION:\n" " Did the device work as expected?" msgstr "" #. description #: ../jobs/camera.txt.in:6 msgid "This Automated test attempts to detect a camera." msgstr "" #. description #: ../jobs/camera.txt.in:14 msgid "" "PURPOSE:\n" " This test will check that the built-in camera works\n" "STEPS:\n" " 1. Click on Test to display a video capture from the camera for ten " "seconds.\n" "VERIFICATION:\n" " Did you see the video capture?" msgstr "" #. description #: ../jobs/camera.txt.in:31 msgid "" "PURPOSE:\n" " This test will check that the built-in camera works\n" "STEPS:\n" " 1. Click on Test to display a still image from the camera for ten " "seconds.\n" "VERIFICATION:\n" " Did you see the image?" msgstr "" #. description #: ../jobs/camera.txt.in:46 msgid "" " Takes multiple pictures based on the resolutions supported by the camera " "and\n" " validates their size and that they are of a valid format." msgstr "" #. description #: ../jobs/codecs.txt.in:8 msgid "" "PURPOSE:\n" " This test will verify your system's ability to play Ogg Vorbis audio " "files.\n" "STEPS:\n" " 1. Click Test to play an Ogg Vorbis file (.ogg)\n" " 2. Please close the player to proceed.\n" "VERIFICATION:\n" " Did the sample play correctly?" msgstr "" #. description #: ../jobs/codecs.txt.in:24 msgid "" "PURPOSE:\n" " This test will verify your system's ability to play Wave Audio files.\n" "STEPS:\n" " 1. Select Test to play a Wave Audio format file (.wav)\n" " 2. Please close the player to proceed.\n" "VERIFICATION:\n" " Did the sample play correctly?" msgstr "" #. description #: ../jobs/cpu.txt.in:8 msgid "" "Test the CPU scaling capabilities using Firmware Test Suite (fwts cpufreq)." msgstr "" #. description #: ../jobs/cpu.txt.in:15 msgid "Attaches the log generated by cpu/scaling_test to the results" msgstr "" #. description #: ../jobs/cpu.txt.in:21 msgid "Test for clock jitter." msgstr "" #. description #: ../jobs/cpu.txt.in:28 msgid "Test offlining CPUs in a multicore system." msgstr "" #. description #: ../jobs/cpu.txt.in:35 msgid "This test checks cpu topology for accuracy" msgstr "" #. description #: ../jobs/cpu.txt.in:42 msgid "This test checks that CPU frequency governors are obeyed when set." msgstr "" #. description #: ../jobs/cpu.txt.in:49 msgid "Validate that the Vector Floating Point Unit is running on ARM device" msgstr "" #. description #: ../jobs/daemons.txt.in:5 msgid "Test if the atd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:11 msgid "Test if the cron daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:17 msgid "Test if the cupsd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:23 msgid "Test if the getty daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:29 msgid "Test if the init daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:35 msgid "Test if the klogd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:41 msgid "Test if the nmbd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:47 msgid "Test if the smbd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:53 msgid "Test if the syslogd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:60 msgid "Test if the udevd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/daemons.txt.in:66 msgid "Test if the winbindd daemon is running when the package is installed." msgstr "" #. description #: ../jobs/disk.txt.in:4 msgid "Detects and displays disks attached to the system." msgstr "" #. description #: ../jobs/disk.txt.in:9 msgid "Check stats changes for each disk" msgstr "" #. description #: ../jobs/disk.txt.in:27 msgid "SMART test" msgstr "" #. description #: ../jobs/disk.txt.in:45 msgid "Maximum disk space used during a default installation test" msgstr "" #. description #: ../jobs/disk.txt.in:45 msgid "Verify system storage performs at or above baseline performance" msgstr "" #. description #: ../jobs/disk.txt.in:62 msgid "" "Verify that storage devices, such as Fibre Channel and RAID can be detected " "and perform under stress." msgstr "" #. description #: ../jobs/disk.txt.in:82 msgid "" "Some new hard drives include a feature that parks the drive heads after a " "short period of inactivity. This is a power-saving feature, but it can have " "a bad interaction with the operating system that results in the drive " "constantly parked then activated. This produces excess wear on the drive, " "potentially leading to early failures." msgstr "" #. description #: ../jobs/esata.txt.in:4 msgid "" "PURPOSE:\n" " This test will check the system can detect the insertion of an eSATA " "HDD\n" "STEPS:\n" " 1. Click 'Test' to begin the test. This test will\n" " timeout and fail if the insertion has not been detected within 20 " "seconds.\n" " 2. Plug an eSATA HDD into an available eSATA port.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the " "automatically\n" " selected result" msgstr "" #. description #: ../jobs/esata.txt.in:20 msgid "" "This is an automated test which performs read/write operations on an " "attached eSATA HDD" msgstr "" #. description #: ../jobs/esata.txt.in:28 msgid "" "PURPOSE:\n" " This test will check the system can detect the removal of an eSATA HDD\n" "STEPS:\n" " 1. Click 'Test' to begin the test. This test will timeout and fail if\n" " the removal has not been detected within 20 seconds.\n" " 2. Remove the previously attached eSATA HDD from the eSATA port.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the " "automatically\n" " selected result" msgstr "" #. description #: ../jobs/expresscard.txt.in:3 msgid "" "PURPOSE:\n" " This will verify that an ExpressCard slot can detect inserted devices.\n" "STEPS:\n" " Skip this test if you do not have an ExpressCard slot.\n" " 1. Plug an ExpressCard device into the ExpressCard slot\n" "VERIFICATION:\n" " Was the device correctly detected?" msgstr "" #. description #: ../jobs/fingerprint.txt.in:3 msgid "" "PURPOSE:\n" " This test will verify that a fingerprint reader will work properly for " "logging into your system. This test case assumes that there's a testing " "account from which test cases are run and a personal account that the tester " "uses to verify the fingerprint reader\n" "STEPS:\n" " 1. Click on the User indicator on the left side of the panel (your user " "name).\n" " 2. Select \"Switch User Account\"\n" " 3. On the LightDM screen select your username.\n" " 4. Use the fingerprint reader to login.\n" " 5. Click on the user switcher applet.\n" " 6. Select the testing account to continue running tests.\n" "VERIFICATION:\n" " Did the authentication procedure work correctly?" msgstr "" #. description #: ../jobs/fingerprint.txt.in:18 msgid "" "PURPOSE:\n" " This test will verify that a fingerprint reader can be used to unlock a " "locked system.\n" "STEPS:\n" " 1. Click on the Session indicator (Cog icon on the Left side of the " "panel) .\n" " 2. Select 'Lock screen'.\n" " 3. Press any key or move the mouse.\n" " 4. A window should appear that provides the ability to unlock either " "typing your password or using fingerprint authentication.\n" " 5. Use the fingerprint reader to unlock.\n" " 6. Your screen should be unlocked.\n" "VERIFICATION:\n" " Did the authentication procedure work correctly?" msgstr "" #. description #: ../jobs/firewire.txt.in:4 msgid "" "PURPOSE:\n" " This test will check the system can detect the insertion of a FireWire " "HDD\n" "STEPS:\n" " 1. Click 'Test' to begin the test. This test will\n" " timeout and fail if the insertion has not been detected within 20 " "seconds.\n" " 2. Plug a FireWire HDD into an available FireWire port.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the " "automatically\n" " selected result" msgstr "" #. description #: ../jobs/firewire.txt.in:20 msgid "" "This is an automated test which performs read/write operations on an " "attached FireWire HDD" msgstr "" #. description #: ../jobs/firewire.txt.in:28 msgid "" "PURPOSE:\n" " This test will check the system can detect the removal of a FireWire " "HDD\n" "STEPS:\n" " 1. Click 'Test' to begin the test. This test will timeout and fail if\n" " the removal has not been detected within 20 seconds.\n" " 2. Remove the previously attached FireWire HDD from the FireWire port.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the " "automatically\n" " selected result" msgstr "" #. description #: ../jobs/floppy.txt.in:4 msgid "Floppy test" msgstr "" #. description #: ../jobs/graphics.txt.in:5 msgid "Parses Xorg.0.Log and discovers the running X driver and version" msgstr "" #. description #: ../jobs/graphics.txt.in:12 msgid "Test to output the Xorg version" msgstr "" #. description #: ../jobs/graphics.txt.in:17 msgid "" "PURPOSE:\n" " This test will verify that the GUI is usable after manually changing " "resolution\n" "STEPS:\n" " 1. Open the Displays application\n" " 2. Select a new resolution from the dropdown list\n" " 3. Click on Apply\n" " 4. Select the original resolution from the dropdown list\n" " 5. Click on Apply\n" "VERIFICATION:\n" " Did the resolution change as expected?" msgstr "" #. description #: ../jobs/graphics.txt.in:36 msgid "Test that the X process is running." msgstr "" #. description #: ../jobs/graphics.txt.in:43 msgid "Test that the X is not running in failsafe mode." msgstr "" #. description #: ../jobs/graphics.txt.in:51 msgid "" "PURPOSE:\n" " This test will verify the default display resolution\n" "STEPS:\n" " 1. This display is using the following resolution:\n" "INFO:\n" " $output\n" "VERIFICATION:\n" " Is this acceptable for your display?" msgstr "" #. description #: ../jobs/graphics.txt.in:82 msgid "" "Ensure the current resolution meets or exceeds the recommended minimum " "resolution (800x600). See here for details:" msgstr "" #. description #: ../jobs/graphics.txt.in:82 msgid "https://help.ubuntu.com/community/Installation/SystemRequirements" msgstr "" #. description #: ../jobs/graphics.txt.in:108 msgid "Collect info on graphics modes (screen resolution and refresh rate)" msgstr "" #. description #: ../jobs/graphics.txt.in:114 msgid "Collect info on color depth and pixel format." msgstr "" #. description #: ../jobs/graphics.txt.in:119 msgid "Collect info on fresh rate." msgstr "" #. description #: ../jobs/graphics.txt.in:124 msgid "Collect info on graphic memory." msgstr "" #. description #: ../jobs/graphics.txt.in:132 msgid "" "PURPOSE:\n" " This test will test the default display\n" "STEPS:\n" " 1. Click \"Test\" to display a video test.\n" "VERIFICATION:\n" " Do you see color bars and static?" msgstr "" #. description #: ../jobs/graphics.txt.in:144 msgid "Check that VESA drivers are not in use" msgstr "" #. description #: ../jobs/graphics.txt.in:152 msgid "" "PURPOSE:\n" " This test cycles through the detected video modes\n" "STEPS:\n" " 1. Click \"Test\" to start cycling through the video modes\n" "VERIFICATION:\n" " Did the screen appear to be working for each mode?" msgstr "" #. description #: ../jobs/graphics.txt.in:165 msgid "" "PURPOSE:\n" " This test will test display rotation\n" "STEPS:\n" " 1. Click \"Test\" to test display rotation. The display will be rotated " "every 4 seconds.\n" " 2. Check if all rotations (normal right inverted left) took place " "without permanent screen corruption\n" "VERIFICATION:\n" " Did the display rotation take place without without permanent screen " "corruption?" msgstr "" #. description #: ../jobs/graphics.txt.in:179 msgid "Check that hardware is able to run compiz" msgstr "" #. description #: ../jobs/graphics.txt.in:186 msgid "Check that hardware is able to run Unity 3D" msgstr "" #. description #: ../jobs/graphics.txt.in:192 msgid "" "PURPOSE:\n" " This test tests the basic 3D capabilities of your video card\n" "STEPS:\n" " 1. Click \"Test\" to execute an OpenGL demo. Press ESC at any time to " "close.\n" " 2. Verify that the animation is not jerky or slow.\n" "VERIFICATION:\n" " 1. Did the 3d animation appear?\n" " 2. Was the animation free from slowness/jerkiness?" msgstr "" #. description #: ../jobs/graphics.txt.in:207 msgid "Open and close a 3D window multiple times" msgstr "" #. description #: ../jobs/graphics.txt.in:214 msgid "Open, suspend resume and close a 3D window multiple times" msgstr "" #. description #: ../jobs/graphics.txt.in:221 msgid "Open and close 4 3D windows multiple times" msgstr "" #. description #: ../jobs/graphics.txt.in:228 msgid "Move a 3D window around the screen" msgstr "" #. description #: ../jobs/graphics.txt.in:234 msgid "" "PURPOSE:\n" " Take a screengrab of the current screen (logged on Unity desktop)\n" "STEPS:\n" " 1. Take picture using USB webcam\n" "VERIFICATION:\n" " Review attachment manually later" msgstr "" #. description #: ../jobs/graphics.txt.in:246 ../jobs/suspend.txt.in:1091 msgid "Attaches the screenshot captured in graphics/screenshot." msgstr "" #. description #: ../jobs/graphics.txt.in:259 msgid "" "PURPOSE:\n" " Take a screengrab of the current screen during fullscreen video " "playback\n" "STEPS:\n" " 1. Start a fullscreen video playback\n" " 2. Take picture using USB webcam after a few seconds\n" "VERIFICATION:\n" " Review attachment manually later" msgstr "" #. description #: ../jobs/graphics.txt.in:272 msgid "" "Attaches the screenshot captured in graphics/screenshot_fullscreen_video." msgstr "" #. description #: ../jobs/hibernate.txt.in:17 msgid "" "PURPOSE:\n" " This test will check to make sure your system can successfully hibernate " "(if supported)\n" "STEPS:\n" " 1. Click on Test\n" " 2. The system will hibernate and should wake itself within 5 minutes\n" " 3. If your system does not wake itself after 5 minutes, please press the " "power button to wake the system manually\n" " 4. If the system fails to resume from hibernate, please restart System " "Testing and mark this test as Failed\n" "VERIFICATION:\n" " Did the system successfully hibernate and did it work properly after " "waking up?" msgstr "" #. description #: ../jobs/hibernate.txt.in:31 msgid "Automated check of the hibernate log for errors discovered by fwts" msgstr "" #. description #: ../jobs/info.txt.in:6 msgid "Attaches a report of installed codecs for Intel HDA" msgstr "" #. description #: ../jobs/info.txt.in:12 msgid "Attaches a report of CPU information" msgstr "" #. description #: ../jobs/info.txt.in:18 msgid "Attaches a copy of /var/log/dmesg to the test results" msgstr "" #. description #: ../jobs/info.txt.in:24 msgid "Attaches info on DMI" msgstr "" #. description #: ../jobs/info.txt.in:32 msgid "Attaches dmidecode output" msgstr "" #. description #: ../jobs/info.txt.in:39 msgid "Attaches lshw output" msgstr "" #. description #: ../jobs/info.txt.in:46 msgid "Attaches the firmware version" msgstr "" #. description #: ../jobs/info.txt.in:52 msgid "Attaches very verbose lspci output." msgstr "" #. description #: ../jobs/info.txt.in:58 msgid "Attaches very verbose lspci output (with central database Query)." msgstr "" #. description #: ../jobs/info.txt.in:66 msgid "List USB devices" msgstr "" #. description #: ../jobs/info.txt.in:77 msgid "Attaches the contents of the various modprobe conf files." msgstr "" #. description #: ../jobs/info.txt.in:83 msgid "Attaches the contents of the /etc/modules file." msgstr "" #. description #: ../jobs/info.txt.in:89 msgid "attaches the contents of various sysctl config files." msgstr "" #. description #: ../jobs/info.txt.in:93 msgid "Attaches a report of sysfs attributes." msgstr "" #. description #: ../jobs/info.txt.in:106 msgid "" "Attaches a dump of the udev database showing system hardware information." msgstr "" #. description #: ../jobs/info.txt.in:112 msgid "Attaches the output of udev_resource, for debugging purposes" msgstr "" #. description #: ../jobs/info.txt.in:119 msgid "Attaches a tarball of gcov data if present." msgstr "" #. description #: ../jobs/info.txt.in:125 msgid "Attaches a list of the currently running kernel modules." msgstr "" #. description #: ../jobs/info.txt.in:131 msgid "Attaches the contents of /proc/acpi/sleep if it exists." msgstr "" #. description #: ../jobs/info.txt.in:135 msgid "Bootchart information." msgstr "" #. description #: ../jobs/info.txt.in:144 msgid "SATA/IDE device information." msgstr "" #. description #: ../jobs/info.txt.in:163 msgid "Attaches the bootchart png file for bootchart runs" msgstr "" #. description #: ../jobs/info.txt.in:171 msgid "Attaches the bootchart log for bootchart test runs." msgstr "" #. description #: ../jobs/info.txt.in:179 msgid "installs the installer bootchart tarball if it exists." msgstr "" #. description #: ../jobs/info.txt.in:185 msgid "Attaches the installer debug log if it exists." msgstr "" #. description #: ../jobs/info.txt.in:192 msgid "" "Returns the name, driver name and driver version of any touchpad discovered " "on the system." msgstr "" #. description #: ../jobs/info.txt.in:204 msgid "Lists the device driver and version for all audio devices." msgstr "" #. description #: ../jobs/info.txt.in:214 msgid "Provides information about network devices" msgstr "" #. description #: ../jobs/info.txt.in:219 msgid "Provides information about displays attached to the system" msgstr "" #. description #: ../jobs/info.txt.in:225 msgid "Attaches information about disk partitions" msgstr "" #. description #: ../jobs/input.txt.in:5 msgid "Pointing device tests." msgstr "" #. description #: ../jobs/input.txt.in:22 msgid "" "PURPOSE:\n" " This test will test your pointing device\n" "STEPS:\n" " 1. Move the cursor using the pointing device or touch the screen.\n" " 2. Perform some single/double/right click operations.\n" "VERIFICATION:\n" " Did the pointing device work as expected?" msgstr "" #. description #: ../jobs/input.txt.in:35 msgid "" "PURPOSE:\n" " This test will test your keyboard\n" "STEPS:\n" " 1. Click on Test\n" " 2. On the open text area, use your keyboard to type something\n" "VERIFICATION:\n" " Is your keyboard working properly?" msgstr "" #. description #: ../jobs/input.txt.in:46 msgid "" "PURPOSE:\n" " Manual detection of accelerometer.\n" "STEPS:\n" " 1. Look at the specifications for your system.\n" "VERIFICATION:\n" " Is this system supposed to have an accelerometer?" msgstr "" #. description #: ../jobs/input.txt.in:59 msgid "" "PURPOSE:\n" " This test will test your accelerometer to see if it is detected\n" " and operational as a joystick device.\n" "STEPS:\n" " 1. Click on Test\n" " 2. Tilt your hardware in the directions onscreen until the axis " "threshold is met.\n" "VERIFICATION:\n" " Is your accelerometer properly detected? Can you use the device?" msgstr "" #. description #: ../jobs/install.txt.in:6 msgid "" "Tests to see that apt can access repositories and get updates (does not " "install updates). This is done to confirm that you could recover from an " "incomplete or broken update." msgstr "" #. description #: ../jobs/install.txt.in:17 msgid "" "Tests oem-config using Xpresser, and then checks that the user has been " "created successfully. Cleans up the newly created user after the test has " "passed." msgstr "" #. description #: ../jobs/keys.txt.in:21 msgid "" "PURPOSE:\n" " This test will test the brightness key\n" "STEPS:\n" " 1. Press the brightness buttons on the keyboard\n" "VERIFICATION:\n" " Did the brightness change following to your key presses?" msgstr "" #. description #: ../jobs/keys.txt.in:35 msgid "" "PURPOSE:\n" " This test will test the volume keys of your keyboard\n" "STEPS:\n" " Skip this test if your computer has no volume keys.\n" " 1. Click test to open a window on which to test the volume keys.\n" " 2. If all the keys work, the test will be marked as passed.\n" "VERIFICATION:\n" " Do the keys work as expected?" msgstr "" #. description #: ../jobs/keys.txt.in:51 msgid "" "PURPOSE:\n" " This test will test the mute key of your keyboard\n" "STEPS:\n" " 1. Click test to open a window on which to test the mute key.\n" " 2. If the key works, the test will pass and the window will close.\n" "VERIFICATION:\n" " Does the mute key work as expected?" msgstr "" #. description #: ../jobs/keys.txt.in:65 msgid "" "PURPOSE:\n" " This test will test the sleep key\n" "STEPS:\n" " 1. Press the sleep key on the keyboard\n" " 2. Wake your system up by pressing the power button\n" "VERIFICATION:\n" " Did the system go to sleep after pressing the sleep key?" msgstr "" #. description #: ../jobs/keys.txt.in:79 msgid "" "PURPOSE:\n" " This test will test the battery information key\n" "STEPS:\n" " Skip this test if you do not have a Battery Button.\n" " 1. Click Test to begin\n" " 2. Press the Battery Info button (or combo like Fn+F3)\n" " 3: Close the Power Statistics tool if it opens\n" "VERIFICATION:\n" " Did the Battery Info key work as expected?" msgstr "" #. description #: ../jobs/keys.txt.in:93 msgid "" "PURPOSE:\n" " This test will test the wireless key\n" "STEPS:\n" " 1. Press the wireless key on the keyboard\n" " 2. Check that the wifi LED turns off or changes color\n" " 3. Check that wireless is disabled\n" " 4. Press the same key again\n" " 5. Check that the wifi LED turns on or changes color\n" " 6. Check that wireless is enabled\n" "VERIFICATION:\n" " Did the wireless turn off on the first press and on again on the " "second?\n" " (NOTE: the LED functionality will be reviewed in a following test. " "Please\n" " only consider the functionality of the wifi itself here.)" msgstr "" #. description #: ../jobs/keys.txt.in:114 msgid "" "PURPOSE:\n" " This test will test the media keys of your keyboard\n" "STEPS:\n" " Skip this test if your computer has no media keys.\n" " 1. Click test to open a window on which to test the media keys.\n" " 2. If all the keys work, the test will be marked as passed.\n" "VERIFICATION:\n" " Do the keys work as expected?" msgstr "" #. description #: ../jobs/keys.txt.in:130 msgid "" "PURPOSE:\n" " This test will test the super key of your keyboard\n" "STEPS:\n" " 1. Click test to open a window on which to test the super key.\n" " 2. If the key works, the test will pass and the window will close.\n" "VERIFICATION:\n" " Does the super key work as expected?" msgstr "" #. description #: ../jobs/keys.txt.in:142 msgid "" "PURPOSE:\n" " Validate that the External Video hot key is working as expected\n" "STEPS:\n" " 1. Plug in an external monitor\n" " 2. Press the display hot key to change the monitors configuration\n" "VERIFICATION:\n" " Check that the video signal can be mirrored, extended, displayed on " "external or onboard only." msgstr "" #. description #: ../jobs/keys.txt.in:154 msgid "" "PURPOSE:\n" " Verify touchpad hotkey toggles touchpad functionality on and off\n" "STEPS:\n" " 1. Verify the touchpad is functional\n" " 2. Tap the touchpad toggle hotkey\n" " 3. Tap the touchpad toggle hotkey again\n" "VERIFICATION:\n" " Verify the touchpad has been disabled and re-enabled." msgstr "" #. description #: ../jobs/led.txt.in:3 msgid "" "PURPOSE:\n" " Power LED verification\n" "STEPS:\n" " 1. Power LED should be on while device is switched on\n" "VERIFICATION:\n" " Does the power LED light as expected?" msgstr "" #. description #: ../jobs/led.txt.in:14 msgid "" "PURPOSE:\n" " Power LED verification\n" "STEPS:\n" " 1. The Power LED should blink or change color while the system is " "suspended\n" "VERIFICATION:\n" " Did the Power LED blink or change color while the system was suspended " "for the previous suspend test?" msgstr "" #. description #: ../jobs/led.txt.in:24 msgid "" "PURPOSE:\n" " Suspend LED verification.\n" "STEPS:\n" " Skip this test if your system does not have a dedicated Suspend LED.\n" " 1. The Suspend LED should blink or change color while the system is\n" " suspended\n" "VERIFICATION\n" " Did the Suspend LED blink or change color while the system was suspended?" msgstr "" #. description #: ../jobs/led.txt.in:36 msgid "" "PURPOSE:\n" " Validate that the battery light shows charging status\n" "STEPS:\n" " 1. Let system run on battery for a while\n" " 2. Plug in AC plug\n" "VERIFICATION:\n" " Did the battery indicator LED turn orange?" msgstr "" #. description #: ../jobs/led.txt.in:47 msgid "" "PURPOSE:\n" " Validate that the battery LED properly displays charged status\n" "STEPS:\n" " 1. Let system run on battery for a short time\n" " 2. Plug in AC\n" " 3. Let system run on AC\n" "VERIFICATION:\n" " Does the orange battery LED shut off when system is fully charged?" msgstr "" #. description #: ../jobs/led.txt.in:59 msgid "" "PURPOSE:\n" " Validate that the battery LED indicated low power\n" "STEPS:\n" " 1. Let system run on battery for several hours\n" " 2. Monitor battery LED carefully\n" "VERIFICATION:\n" " Does the LED light orange when battery is low?" msgstr "" #. description #: ../jobs/led.txt.in:71 msgid "" "PURPOSE:\n" " HDD LED verification\n" "STEPS:\n" " 1. Select \"Test\" to write and read a temporary file for a few seconds\n" " 2. HDD LED should light when writing to/reading from HDD\n" "VERIFICATION:\n" " Did the HDD LED light?" msgstr "" #. description #: ../jobs/led.txt.in:83 msgid "" "PURPOSE:\n" " Numeric keypad LED verification\n" "STEPS:\n" " 1. Press \"Block Num\" key to toggle numeric keypad LED\n" " 2. Click on the \"Test\" button to open a window to verify your typing\n" " 3. Type using the numeric keypad both when the LED is on and off\n" "VERIFICATION:\n" " 1. Numeric keypad LED status should toggle everytime the \"Block Num\" " "key is pressed\n" " 2. Numbers should only be entered in the keyboard verification window " "when the LED is on" msgstr "" #. description #: ../jobs/led.txt.in:96 msgid "" "PURPOSE:\n" " Block cap keys LED verification\n" "STEPS:\n" " 1. Press \"Block Cap Keys\" to activate/deactivate cap keys blocking\n" " 2. Cap Keys LED should be switched on/off every time the key is pressed\n" "VERIFICATION:\n" " Did the Cap Keys LED light as expected?" msgstr "" #. description #: ../jobs/led.txt.in:108 msgid "" "PURPOSE:\n" " WLAN LED verification\n" "STEPS:\n" " 1. During the keys/wireless test you should have observed the\n" " wireless LED while turning wireless back on.\n" " 2. WLAN LED should light or change color when wireless is turned on\n" "VERIFICATION:\n" " Did the WLAN LED turn on or change color as expected?" msgstr "" #. description #: ../jobs/led.txt.in:121 msgid "" "PURPOSE:\n" " Validate that WLAN LED shuts off when disabled\n" "STEPS:\n" " 1. During the keys/wireless test you should have observed the WLAN LED\n" " while performing that test after turning wireless off.\n" " 2. WLAN LED should turn off or change color when wireless is turned off\n" "VERIFICATION:\n" " Did the WLAN LED turn off or change color as expected?" msgstr "" #. description #: ../jobs/led.txt.in:134 msgid "" "PURPOSE:\n" " Validate that the Bluetooth LED turns on and off when BT is " "enabled/disabled\n" "STEPS:\n" " 1. Switch bluetooth off from a hardware switch (if present)\n" " 2. Switch bluetooth back on\n" " 3. Switch bluetooth off from the panel applet\n" " 4. Switch bluetooth back on\n" "VERIFICATION:\n" " Did the bluetooth LED turn off and on twice?" msgstr "" #. description #: ../jobs/led.txt.in:149 msgid "" "PURPOSE:\n" " Camera LED verification\n" "STEPS:\n" " 1. Select Test to activate camera\n" " 2. Camera LED should light for a few seconds\n" "VERIFICATION:\n" " Did the camera LED light?" msgstr "" #. description #: ../jobs/led.txt.in:160 msgid "" "PURPOSE:\n" " Touchpad LED verification\n" "STEPS:\n" " 1. Click on the touchpad button or press key combination to " "enable/disable touchpad button\n" " 2. Slide your finger on the touchpad\n" "VERIFICATION:\n" " 1. Touchpad LED status should toggle everytime the button is clicked or " "the key combination is pressed\n" " 2. When the LED is on, the mouse pointer should move on touchpad usage\n" " 3. When the LED is off, the mouse pointer should not move on touchpad " "usage" msgstr "" #. description #: ../jobs/led.txt.in:173 msgid "" "PURPOSE:\n" " Wireless (WLAN + Bluetooth) LED verification\n" "STEPS:\n" " 1. Make sure WLAN connection is established and Bluetooth is enabled.\n" " 2. WLAN/Bluetooth LED should light\n" " 3. Switch WLAN and Bluetooth off from a hardware switch (if present)\n" " 4. Switch them back on\n" " 5. Switch WLAN and Bluetooth off from the panel applet\n" " 6. Switch them back on\n" "VERIFICATION:\n" " Did the WLAN/Bluetooth LED light as expected?" msgstr "" #. description #: ../jobs/led.txt.in:189 msgid "" "PURPOSE:\n" " Audio Mute LED verification.\n" "STEPS:\n" " Skip this test if your system does not have a special Audio Mute LED.\n" " 1. Press the Mute key twice and observe the Audio LED to determine if " "it\n" " either turned off and on or changed colors.\n" "VERIFICATION:\n" " Did the Audio LED turn on and off change color as expected?" msgstr "" #. description #: ../jobs/local.txt.in:3 msgid "Audio tests" msgstr "" #. description #: ../jobs/local.txt.in:10 msgid "Benchmarks tests" msgstr "" #. description #: ../jobs/local.txt.in:17 msgid "Bluetooth tests" msgstr "" #. description #: ../jobs/local.txt.in:24 msgid "Camera tests" msgstr "" #. description #: ../jobs/local.txt.in:31 msgid "Codec tests" msgstr "" #. description #: ../jobs/local.txt.in:38 msgid "CPU tests" msgstr "" #. description #: ../jobs/local.txt.in:45 msgid "System Daemon tests" msgstr "" #. description #: ../jobs/local.txt.in:52 msgid "Disk tests" msgstr "" #. description #: ../jobs/local.txt.in:66 msgid "eSATA disk tests" msgstr "" #. description #: ../jobs/local.txt.in:73 msgid "Fingerprint reader tests" msgstr "" #. description #: ../jobs/local.txt.in:80 msgid "Firewire disk tests" msgstr "" #. description #: ../jobs/local.txt.in:94 msgid "Floppy disk tests" msgstr "" #. description #: ../jobs/local.txt.in:101 msgid "Graphics tests" msgstr "" #. description #: ../jobs/local.txt.in:108 msgid "Hibernation tests" msgstr "" #. description #: ../jobs/local.txt.in:115 msgid "Informational tests" msgstr "" #. description #: ../jobs/local.txt.in:122 msgid "Input Devices tests" msgstr "" #. description #: ../jobs/local.txt.in:129 msgid "Software Installation tests" msgstr "" #. description #: ../jobs/local.txt.in:136 msgid "Hotkey tests" msgstr "" #. description #: ../jobs/local.txt.in:143 msgid "LED tests" msgstr "" #. description #: ../jobs/local.txt.in:150 msgid "Media Card tests" msgstr "" #. description #: ../jobs/local.txt.in:157 msgid "Memory tests" msgstr "" #. description #: ../jobs/local.txt.in:164 msgid "Rendercheck tests" msgstr "" #. description #: ../jobs/local.txt.in:178 msgid "Miscellaneous tests" msgstr "" #. description #: ../jobs/local.txt.in:185 msgid "Monitor tests" msgstr "" #. description #: ../jobs/local.txt.in:171 msgid "Networking tests" msgstr "" #. description #: ../jobs/local.txt.in:199 msgid "Optical Drive tests" msgstr "" #. description #: ../jobs/local.txt.in:206 msgid "Panel Clock Verification tests" msgstr "" #. description #: ../jobs/local.txt.in:213 msgid "Panel Reboot Verification tests" msgstr "" #. description #: ../jobs/local.txt.in:220 msgid "ExpressCard tests" msgstr "" #. description #: ../jobs/local.txt.in:227 msgid "Peripheral tests" msgstr "" #. description #: ../jobs/local.txt.in:234 msgid "Piglit tests" msgstr "" #. description #: ../jobs/local.txt.in:241 msgid "Power Management tests" msgstr "" #. description #: ../jobs/local.txt.in:248 msgid "Server Services checks" msgstr "" #. description #: ../jobs/local.txt.in:255 msgid "Suspend tests" msgstr "" #. description #: ../jobs/local.txt.in:262 msgid "Touchpad tests" msgstr "" #. description #: ../jobs/local.txt.in:269 msgid "Touchscreen tests" msgstr "" #. description #: ../jobs/local.txt.in:276 msgid "USB tests" msgstr "" #. description #: ../jobs/local.txt.in:283 msgid "User Applications" msgstr "" #. description #: ../jobs/local.txt.in:290 msgid "Virtualization tests" msgstr "" #. description #: ../jobs/local.txt.in:297 msgid "Wireless networking tests" msgstr "" #. description #: ../jobs/local.txt.in:304 msgid "Mobile broadband tests" msgstr "" #. description #: ../jobs/local.txt.in:311 msgid "Stress tests" msgstr "" #. description #: ../jobs/local.txt.in:318 msgid "Smoke tests" msgstr "" #. description #: ../jobs/local.txt.in:325 msgid "Sniff Sniffers" msgstr "" #. description #: ../jobs/mediacard.txt.in:4 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a Multimedia Card (MMC) media\n" "STEPS:\n" " 1. Click \"Test\" and insert an MMC card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:24 msgid "" "This test is automated and executes after the mediacard/mmc-insert test is " "run. It tests reading and writing to the MMC card." msgstr "" #. description #: ../jobs/mediacard.txt.in:30 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of the MMC card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the MMC card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:44 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of an UNLOCKED Secure Digital (SD) media card\n" "STEPS:\n" " 1. Click \"Test\" and insert an UNLOCKED SD card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:67 msgid "" "This test is automated and executes after the mediacard/sd-insert test is " "run. It tests reading and writing to the SD card." msgstr "" #. description #: ../jobs/mediacard.txt.in:70 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of an SD card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the SD card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:93 msgid "" "This is a fully automated version of mediacard/sd-automated and assumes that " "the system under test has a memory card device plugged in prior to checkbox " "execution. It is intended for SRU automated testing." msgstr "" #. description #: ../jobs/mediacard.txt.in:94 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a UNLOCKED Secure Digital High-Capacity\n" " (SDHC) media card\n" "STEPS:\n" " 1. Click \"Test\" and insert an UNLOCKED SDHC card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:122 msgid "" "This test is automated and executes after the mediacard/sdhc-insert test is " "run. It tests reading and writing to the SDHC card." msgstr "" #. description #: ../jobs/mediacard.txt.in:121 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of an SDHC card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the SDHC card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:135 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a Compact Flash (CF) media card\n" "STEPS:\n" " 1. Click \"Test\" and insert a CF card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:165 msgid "" "This test is automated and executes after the mediacard/cf-insert test is " "run. It tests reading and writing to the CF card." msgstr "" #. description #: ../jobs/mediacard.txt.in:161 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of a CF card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the CF card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1763 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a CF card after the system has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert a CF card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1782 msgid "" "This test is automated and executes after the mediacard/cf-insert-after-" "suspend test is run. It tests reading and writing to the CF card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1791 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal\n" " of a CF card from the systems card reader after the system has been " "suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the CF card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:216 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a Secure Digital Extended Capacity (SDXC) media " "card\n" "STEPS:\n" " 1. Click \"Test\" and insert a SDXC card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:208 msgid "" "This test is automated and executes after the mediacard/sdxc-insert test is " "run. It tests reading and writing to the SDXC card." msgstr "" #. description #: ../jobs/mediacard.txt.in:242 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of a SDXC card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the SDXC card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1808 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a SDXC card after the system has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert a SDXC card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1827 msgid "" "This test is automated and executes after the mediacard/sdxc-insert-after-" "suspend test is run. It tests reading and writing to the SDXC card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1836 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal\n" " of a SDXC card from the systems card reader after the system has been " "suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the SDXC card from the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:298 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a Memory Stick (MS) media card\n" "STEPS:\n" " 1. Click \"Test\" and insert a MS card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:251 msgid "" "This test is automated and executes after the mediacard/ms-insert test is " "run. It tests reading and writing to the MS card." msgstr "" #. description #: ../jobs/mediacard.txt.in:324 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of a MS card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the MS card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1853 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a MS card after the system has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert a MS card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1872 msgid "" "This test is automated and executes after the mediacard/ms-insert-after-" "suspend test is run. It tests reading and writing to the MS card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1881 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal\n" " of a MS card from the systems card reader after the system has been " "suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the MS card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:379 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a Memory Stick Pro (MSP) media card\n" "STEPS:\n" " 1. Click \"Test\" and insert a MSP card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:294 msgid "" "This test is automated and executes after the mediacard/msp-insert test is " "run. It tests reading and writing to the MSP card." msgstr "" #. description #: ../jobs/mediacard.txt.in:303 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of a MSP card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the MSP card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1897 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a MSP card after the system has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert a MSP card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1916 msgid "" "This test is automated and executes after the mediacard/msp-insert-after-" "suspend test is run. It tests reading and writing to the MSP card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1925 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal\n" " of a MSP card from the systems card reader after the system has been " "suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the MSP card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:460 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a Extreme Digital (xD) media card\n" "STEPS:\n" " 1. Click \"Test\" and insert a xD card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/mediacard.txt.in:337 msgid "" "This test is automated and executes after the mediacard/xd-insert test is " "run. It tests reading and writing to the xD card." msgstr "" #. description #: ../jobs/mediacard.txt.in:486 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of a xD card from the systems card reader.\n" "STEPS:\n" " 1. Click \"Test\" and remove the xD card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1941 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of a xD card after the system has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert a xD card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1960 msgid "" "This test is automated and executes after the mediacard/xd-insert-after-" "suspend test is run. It tests reading and writing to the xD card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1969 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal\n" " of a xD card from the systems card reader after the system has been " "suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the xD card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/memory.txt.in:5 msgid "" "This test checks the amount of memory which is reporting in meminfo against " "the size of the memory modules detected by DMI." msgstr "" #. description #: ../jobs/memory.txt.in:15 msgid "Test and exercise memory." msgstr "" #. description #: ../jobs/miscellanea.txt.in:19 msgid "" "PURPOSE:\n" " Keep tester related information in the report\n" "STEPS:\n" " 1. Tester Information\n" " 2. Please enter the following information in the comments field:\n" " a. Name\n" " b. Email Address\n" " c. Reason for this test run\n" "VERIFICATION:\n" " Nothing to verify for this test" msgstr "" #. description #: ../jobs/miscellanea.txt.in:37 msgid "" "PURPOSE:\n" " This test will check that the system can switch to a virtual terminal " "and back to X\n" "STEPS:\n" " 1. Click \"Test\" to switch to another virtual terminal and then back to " "X\n" "VERIFICATION:\n" " Did your screen change temporarily to a text console and then switch " "back to your current session?" msgstr "" #. description #: ../jobs/miscellanea.txt.in:50 msgid "Run Firmware Test Suite (fwts) automated tests." msgstr "" #. description #: ../jobs/miscellanea.txt.in:60 msgid "Attaches the FWTS results log to the submission" msgstr "" #. description #: ../jobs/miscellanea.txt.in:67 msgid "" "This will run some basic connectivity tests against a BMC, verifying that " "IPMI works." msgstr "" #. description #: ../jobs/miscellanea.txt.in:73 msgid "" " Determine if we need to run tests specific to portable computers that may " "not apply to desktops." msgstr "" #. description #: ../jobs/miscellanea.txt.in:81 msgid "" "Test that the /var/crash directory doesn't contain anything. Lists the files " "contained within if it does, or echoes the status of the directory (doesn't " "exist/is empty)" msgstr "" #. description #: ../jobs/miscellanea.txt.in:87 msgid "" "Checks that a specified sources list file contains the requested repositories" msgstr "" #. description #: ../jobs/miscellanea.txt.in:92 msgid "Automated job to generate the PXE verification test for each NIC." msgstr "" #. description #: ../jobs/miscellanea.txt.in:112 msgid "" "Automated job to generate the Remote Shared IPMI verification test for each " "NIC." msgstr "" #. description #: ../jobs/miscellanea.txt.in:130 msgid "" "PURPOSE:\n" " Some systems do not share IPMI over all NICs but instead have a dedicated " "management port directly connected to the BMC. This test verifies that you " "have used that port for remote IPMI connections and actions.\n" "STEPS:\n" " 1. Prior to running the test, you should have configured and used the " "Dedicated Management Port to remotely power off/on this sytem.\n" "VERIFICATION:\n" " Skip this test if this system ONLY uses shared management/ethernet ports OR " "if this system does not have a BMC (Management Console)\n" " 1. Select Yes if you successfully used IPMI to remotely power this system " "off and on using the dedicated management port.\n" " 2. Select No if you attempted to use the dedicated management port to " "remotely power this system off/on and it failed for some reason." msgstr "" #. description #: ../jobs/mobilebroadband.txt.in:10 msgid "" "Creates a mobile broadband connection for a GSM based modem and checks the " "connection to ensure it's working. " msgstr "" #. description #: ../jobs/mobilebroadband.txt.in:21 msgid "" "Creates a mobile broadband connection for a CDMA based modem and checks the " "connection to ensure it's working." msgstr "" #. description #: ../jobs/monitor.txt.in:4 msgid "" "PURPOSE:\n" " This test will check your VGA port.\n" "STEPS:\n" " Skip this test if your system does not have a VGA port.\n" " 1. Connect a display (if not already connected) to the VGA port on your " "system\n" "VERIFICATION:\n" " Was the desktop displayed correctly on both screens?" msgstr "" #. description #: ../jobs/monitor.txt.in:16 msgid "" "PURPOSE:\n" " This test will check your DVI port.\n" "STEPS:\n" " Skip this test if your system does not have a DVI port.\n" " 1. Connect a display (if not already connected) to the DVI port on your " "system\n" "VERIFICATION:\n" " Was the desktop displayed correctly on both screens?" msgstr "" #. description #: ../jobs/monitor.txt.in:28 msgid "" "PURPOSE:\n" " This test will check your DisplayPort port.\n" "STEPS:\n" " Skip this test if your system does not have a DisplayPort port.\n" " 1. Connect a display (if not already connected) to the DisplayPort port " "on your system\n" "VERIFICATION:\n" " Was the desktop displayed correctly on both screens?" msgstr "" #. description #: ../jobs/monitor.txt.in:40 msgid "" "PURPOSE:\n" " This test will check your HDMI port.\n" "STEPS:\n" " Skip this test if your system does not have a HDMI port.\n" " 1. Connect a display (if not already connected) to the HDMI port on your " "system\n" "VERIFICATION:\n" " Was the desktop displayed correctly on both screens?" msgstr "" #. description #: ../jobs/monitor.txt.in:52 msgid "" "PURPOSE:\n" " This test will check your S-VIDEO port.\n" "STEPS:\n" " Skip this test if your system does not have a S-VIDEO port.\n" " 1. Connect a display (if not already connected) to the S-VIDEO port on " "your system\n" "VERIFICATION:\n" " Was the desktop displayed correctly on both screens?" msgstr "" #. description #: ../jobs/monitor.txt.in:64 msgid "" "PURPOSE:\n" " This test will check your RCA port.\n" "STEPS:\n" " Skip this test if your system does not have a RCA port.\n" " 1. Connect a display (if not already connected) to the RCA port on your " "system\n" "VERIFICATION:\n" " Was the desktop displayed correctly on both screens?" msgstr "" #. description #: ../jobs/monitor.txt.in:76 msgid "" "PURPOSE:\n" " This test verifies that multi-monitor output works on your desktop " "system. This is NOT the same test as the external monitor tests you would " "run on your laptop. You will need two monitors to perform this test.\n" "STEPS:\n" " Skip this test if your video card does not support multiple monitors.\n" " 1. If your second monitor is not already connected, connect it now\n" " 2. Open the \"Displays\" tool (open the dash and search for " "\"Displays\")\n" " 3. Configure your output to provide one desktop across both monitors\n" " 4. Open any application and drag it from one monitor to the next.\n" "VERIFICATION:\n" " Was the stretched desktop displayed correctly across both screens?" msgstr "" #. description #: ../jobs/monitor.txt.in:91 msgid "" "PURPOSE:\n" " This test will check your monitor power saving capabilities\n" "STEPS:\n" " 1. Click \"Test\" to try the power saving capabilities of your monitor\n" " 2. Press any key or move the mouse to recover\n" "VERIFICATION:\n" " Did the monitor go blank and turn on again?" msgstr "" #. description #: ../jobs/monitor.txt.in:105 msgid "" "PURPOSE:\n" " This test will test changes to screen brightness\n" "STEPS:\n" " 1. Click \"Test\" to try to dim the screen.\n" " 2. Check if the screen was dimmed approximately to half of the maximum " "brightness.\n" " 3. The screen will go back to the original brightness in 2 seconds.\n" "VERIFICATION:\n" " Was your screen dimmed approximately to half of the maximum brightness?" msgstr "" #. description #: ../jobs/ethernet.txt.in:9 msgid "Test to detect the available network controllers" msgstr "" #. description #: ../jobs/networking.txt.in:6 msgid "Tests whether the system has a working Internet connection." msgstr "" #. description #: ../jobs/networking.txt.in:11 msgid "Network Information" msgstr "" #. description #: ../jobs/ethernet.txt.in:68 ../jobs/suspend.txt.in:597 #: ../jobs/wireless.txt.in:371 msgid "" "This is an automated test to gather some info on the current state of your " "network devices. If no devices are found, the test will exit with an error." msgstr "" #. description #: ../jobs/ethernet.txt.in:25 msgid "" "PURPOSE:\n" " This test will check your wired connection\n" "STEPS:\n" " 1. Click on the Network icon in the top panel\n" " 2. Select a network below the \"Wired network\" section\n" " 3. Click \"Test\" to verify that it's possible to establish a HTTP " "connection\n" "VERIFICATION:\n" " Did a notification show and was the connection correctly established?" msgstr "" #. description #: ../jobs/networking.txt.in:65 msgid "" "PURPOSE:\n" " This test will check that a DSL modem can be configured and connected.\n" "STEPS:\n" " 1. Connect the telephone line to the computer\n" " 2. Click on the Network icon on the top panel.\n" " 3. Select \"Edit Connections\"\n" " 4. Select the \"DSL\" tab\n" " 5. Click on \"Add\" button\n" " 6. Configure the connection parameters properly\n" " 7. Click \"Test\" to verify that it's possible to establish an HTTP " "connection\n" "VERIFICATION:\n" " Did a notification show and was the connection correctly established?" msgstr "" #. description #: ../jobs/networking.txt.in:47 msgid "" "Automated test case to verify availability of some system on the network " "using ICMP ECHO packets." msgstr "" #. description #: ../jobs/networking.txt.in:53 ../jobs/peripheral.txt.in:37 msgid "" "Automated test case to make sure that it's possible to download files " "through HTTP" msgstr "" #. description #: ../jobs/networking.txt.in:61 msgid "Test to see if we can sync local clock to an NTP server" msgstr "" #. description #: ../jobs/networking.txt.in:67 msgid "" "Verify that an installation of checkbox-server on the network can be reached " "over SSH." msgstr "" #. description #: ../jobs/networking.txt.in:73 msgid "Try to enable a remote printer on the network and print a test page." msgstr "" #. description #: ../jobs/ethernet.txt.in:38 msgid "" "Automated test to walk multiple network cards and test each one in sequence." msgstr "" #. description #: ../jobs/optical.txt.in:4 msgid "Test to detect the optical drives" msgstr "" #. description #: ../jobs/optical.txt.in:14 msgid "Optical read test." msgstr "" #. description #: ../jobs/optical.txt.in:37 msgid "Automated optical read test." msgstr "" #. description #: ../jobs/optical.txt.in:53 msgid "CD write test." msgstr "" #. description #: ../jobs/optical.txt.in:79 msgid "Automated CD write test" msgstr "" #. description #: ../jobs/optical.txt.in:96 msgid "" "PURPOSE:\n" " This test will check your CD audio playback capabilities\n" "STEPS:\n" " 1. Insert an audio CD in your optical drive\n" " 2. When prompted, launch the Music Player\n" " 3. Locate the CD in the display of the Music Player\n" " 4. Select the CD in the Music Player\n" " 5. Click the Play button to listen to the music on the CD\n" " 6. Stop playing after some time\n" " 7. Right click on the CD icon and select \"Eject Disc\"\n" " 8. The CD should be ejected\n" " 9. Close the Music Player\n" "VERIFICATION:\n" " Did all the steps work?" msgstr "" #. description #: ../jobs/optical.txt.in:116 msgid "DVD write test." msgstr "" #. description #: ../jobs/optical.txt.in:142 msgid "Automated DVD write test." msgstr "" #. description #: ../jobs/optical.txt.in:162 msgid "" "PURPOSE:\n" " This test will check your DVD playback capabilities\n" "STEPS:\n" " 1. Insert a DVD that contains any movie in your optical drive\n" " 2. Click \"Test\" to play the DVD in Totem\n" "VERIFICATION:\n" " Did the file play?" msgstr "" #. description #: ../jobs/panel_clock_test.txt.in:4 msgid "" "PURPOSE:\n" " This test will verify that the desktop clock displays the correct date " "and time\n" "STEPS:\n" " 1. Check the clock in the upper right corner of your desktop.\n" "VERIFICATION:\n" " Is the clock displaying the correct date and time for your timezone?" msgstr "" #. description #: ../jobs/panel_clock_test.txt.in:18 msgid "" "PURPOSE:\n" " This test will verify that the desktop clock synchronizes with the system " "clock.\n" "STEPS:\n" " 1. Click the \"Test\" button and verify the clock moves ahead by 1 hour.\n" " Note: It may take a minute or so for the clock to refresh\n" " 2. Right click on the clock, then click on \"Time & Date Settings...\"\n" " 3. Ensure that your clock application is set to manual.\n" " 4. Change the time 1 hour back\n" " 5. Close the window and reboot\n" "VERIFICATION:\n" " Is your system clock displaying the correct date and time for your " "timezone?" msgstr "" #. description #: ../jobs/panel_reboot.txt.in:3 msgid "" "PURPOSE:\n" " This test will verify that you can reboot your system from the desktop " "menu\n" "STEPS:\n" " 1. Click the Gear icon in the upper right corner of the desktop and click " "on \"Shut Down\"\n" " 2. Click the \"Restart\" button on the left side of the Shut Down dialog\n" " 3. After logging back in, restart System Testing and it should resume " "here\n" "VERIFICATION:\n" " Did your system restart and bring up the GUI login cleanly?" msgstr "" #. description #: ../jobs/peripheral.txt.in:3 msgid "" "PURPOSE:\n" " This test will verify that a network printer is usable\n" "STEPS:\n" " 1. Make sure that a printer is available in your network\n" " 2. Click on the Gear icon in the upper right corner and then click on " "Printers\n" " 3. If the printer isn't already listed, click on Add\n" " 4. The printer should be detected and proper configuration values should " "be displayed\n" " 5. Print a test page\n" "VERIFICATION:\n" " Were you able to print a test page to the network printer?" msgstr "" #. description #: ../jobs/peripheral.txt.in:18 msgid "" "PURPOSE:\n" " This test will verify that a USB DSL or Mobile Broadband modem works\n" "STEPS:\n" " 1. Connect the USB cable to the computer\n" " 2. Right click on the Network icon in the panel\n" " 3. Select 'Edit Connections'\n" " 4. Select the 'DSL' (for ADSL modem) or 'Mobile Broadband' (for 3G modem) " "tab\n" " 5. Click on 'Add' button\n" " 6. Configure the connection parameters properly\n" " 7. Notify OSD should confirm that the connection has been established\n" " 8. Select Test to verify that it's possible to establish an HTTP " "connection\n" "VERIFICATION:\n" " Was the connection correctly established?" msgstr "" #. description #: ../jobs/piglit.txt.in:7 msgid "" "Runs piglit tests for checking support for framebuffer object operations, " "depth buffer and stencil buffer" msgstr "" #. description #: ../jobs/piglit.txt.in:16 msgid "Runs piglit tests for checking OpenGL 2.1 support" msgstr "" #. description #: ../jobs/piglit.txt.in:25 msgid "" "Runs piglit tests for checking support for vertex buffer object operations" msgstr "" #. description #: ../jobs/piglit.txt.in:34 msgid "" "Runs piglit tests for checking support for GLSL fragment shader operations" msgstr "" #. description #: ../jobs/piglit.txt.in:43 msgid "" "Runs piglit tests for checking support for GLSL vertex shader operations" msgstr "" #. description #: ../jobs/piglit.txt.in:52 msgid "Runs piglit tests for checking support for texture from pixmap" msgstr "" #. description #: ../jobs/piglit.txt.in:61 msgid "Runs piglit_tests for checking support for stencil buffer operations" msgstr "" #. description #: ../jobs/piglit.txt.in:70 msgid "Runs the piglit results summarizing tool" msgstr "" #. description #: ../jobs/piglit.txt.in:79 msgid "Archives the piglit-summary directory into the piglit-results.tar.gz." msgstr "" #. description #: ../jobs/power-management.txt.in:3 msgid "" "PURPOSE:\n" " This test will check your system shutdown/booting cycle.\n" "STEPS:\n" " 1. Shutdown your machine.\n" " 2. Boot your machine.\n" " 3. Repeat steps 1 and 2 at least 5 times.\n" "VERIFICATION:\n" " Did the system shutdown and rebooted correctly?" msgstr "" #. description #: ../jobs/power-management.txt.in:17 msgid "Test ACPI Wakealarm (fwts wakealarm)" msgstr "" #. description #: ../jobs/power-management.txt.in:25 msgid "Attach log from fwts wakealarm test" msgstr "" #. description #: ../jobs/power-management.txt.in:39 msgid "" "PURPOSE:\n" " This test will check the system's ability to power-off and boot.\n" "STEPS:\n" " 1. Select \"Test\" to begin.\n" " 2. The machine will shut down.\n" " 3. Power the machine back on.\n" " 4. After rebooting, wait for the test prompts to inform you that the test " "is complete.\n" " 5. Once the test has completed, restart checkbox and select 'Re-run' when " "prompted.\n" "VERIFICATION:\n" " If the machine successfully shuts down and boots, select 'Yes', otherwise,\n" " select 'No'." msgstr "" #. description #: ../jobs/power-management.txt.in:55 msgid "" "This will attach any logs from the power-management/poweroff test to the " "results." msgstr "" #. description #: ../jobs/power-management.txt.in:66 msgid "" "PURPOSE:\n" " This test will check the system's ability to reboot cleanly.\n" "STEPS:\n" " 1. Select \"Test\" to begin.\n" " 2. The machine will reboot.\n" " 3. After rebooting, wait for the test prompts to inform you that the test " "is complete.\n" " 4. Once the test has completed, restart checkbox and select Re-Run when " "prompted.\n" "VERIFICATION:\n" " If the machine successfully reboots, select Yes then select Next." msgstr "" #. description #: ../jobs/power-management.txt.in:80 msgid "" "This will attach any logs from the power-management/reboot test to the " "results." msgstr "" #. description #: ../jobs/power-management.txt.in:86 msgid "" "PURPOSE:\n" " This test will check your lid sensors.\n" "STEPS:\n" " 1. Close your laptop lid.\n" "VERIFICATION:\n" " Does closing your laptop lid cause your system to suspend?" msgstr "" #. description #: ../jobs/power-management.txt.in:103 msgid "" "PURPOSE:\n" " This test will check your lid sensors\n" "STEPS:\n" " 1. Click \"Test\".\n" " 2. Close and open the lid.\n" "VERIFICATION:\n" " Did the screen turn off while the lid was closed?" msgstr "" #. description #: ../jobs/power-management.txt.in:121 msgid "" "PURPOSE:\n" " This test will check your lid sensors.\n" "STEPS:\n" " 1. Click \"Test\".\n" " 2. Close the lid.\n" " 3. Wait 5 seconds with the lid closed.\n" " 4. Open the lid.\n" "VERIFICATION:\n" " Did the system resume when the lid was opened?" msgstr "" #. description #: ../jobs/power-management.txt.in:136 msgid "Make sure that the RTC (Real-Time Clock) device exists." msgstr "" #. description #: ../jobs/power-management.txt.in:145 msgid "" "Check to see if CONFIG_NO_HZ is set in the kernel (this is just a simple " "regression check)" msgstr "" #. description #: ../jobs/power-management.txt.in:151 msgid "" "PURPOSE:\n" " This test will ensure that the AC is unplugged for the battery drain " "tests to run.\n" "STEPS:\n" " 1. Unplug laptop from AC.\n" "VERIFICATION:\n" " Was the laptop unplugged from AC?" msgstr "" #. description #: ../jobs/power-management.txt.in:163 msgid "Checks the battery drain during idle. Reports time until empty" msgstr "" #. description #: ../jobs/power-management.txt.in:163 msgid "and capacity as well." msgstr "" #. description #: ../jobs/power-management.txt.in:173 msgid "Checks the battery drain while watching a movie. Reports time" msgstr "" #. description #: ../jobs/power-management.txt.in:173 msgid "until empty and capacity as well. Requires MOVIE_VAR to be set." msgstr "" #. description #: ../jobs/power-management.txt.in:185 msgid "Checks the battery drain during suspend. Reports time until" msgstr "" #. description #: ../jobs/power-management.txt.in:185 msgid "empty and capacity as well." msgstr "" #. description #: ../jobs/power-management.txt.in:193 msgid "" "PURPOSE:\n" " This test will ensure that the AC is plugged back in after the battery.\n" " tests\n" "STEPS:\n" " 1. Plug laptop into AC.\n" "VERIFICATION:\n" " Was the laptop plugged into AC?" msgstr "" #. description #: ../jobs/power-management.txt.in:206 msgid "" "PURPOSE:\n" " This test will verify that your system can successfully reboot.\n" "STEPS:\n" " 1. Select 'Test' to initiate a system reboot.\n" " 2. When the grub boot menu is displayed, boot into Ubuntu (Or allow the\n" " system to automatically boot on its own).\n" " 3. Once the system has restarted, log in and restart checkbox-" "certification-server.\n" " 4. Select 'Re-Run' to return to this test.\n" " 5. Select 'Yes' to indicate the test has passed if the system rebooted\n" " successfully, otherwise, select 'No' to indicate there was a problem.\n" "VERIFICATION:\n" " Did the system reboot correctly?" msgstr "" #. description #: ../jobs/power-management.txt.in:224 msgid "" "PURPOSE:\n" " This test will check your system shutdown/booting cycle\n" "STEPS:\n" " 1. Select 'Test' to initiate a system shutdown.\n" " 2. Power the system back on.\n" " 3. From the grub menu, boot into the Xen Hypervisor.\n" " 4. When the system has restarted, log in and restart checkbox-" "certification-server.\n" " 5. Select 'Re-Run' to return to this test.\n" " 6. Select 'Yes' to indicate the test has passed if the machine shut " "down\n" " successfully otherwise, Select 'No' to indicate there was a problem.\n" "VERIFICATION:\n" " Did the system shutdown and boot correctly?" msgstr "" #. description #: ../jobs/rendercheck.txt.in:6 msgid "" "Runs all of the rendercheck test suites. This test can take a few minutes." msgstr "" #. description #: ../jobs/rendercheck.txt.in:13 msgid "Attach log from rendercheck tests" msgstr "" #. description #: ../jobs/server-services.txt.in:5 msgid "Verifies that sshd is running." msgstr "" #. description #: ../jobs/server-services.txt.in:11 msgid "Verifies that Print/CUPs server is running." msgstr "" #. description #: ../jobs/server-services.txt.in:20 msgid "Verifies that DNS server is running and working." msgstr "" #. description #: ../jobs/server-services.txt.in:29 msgid "Verifies that Samba server is running." msgstr "" #. description #: ../jobs/server-services.txt.in:40 msgid "Verifies that the LAMP stack is running (Apache, MySQL and PHP)." msgstr "" #. description #: ../jobs/server-services.txt.in:47 msgid "Verifies that Tomcat server is running and working." msgstr "" #. description #: ../jobs/smoke.txt.in:4 msgid "Check success result from shell test case" msgstr "" #. description #: ../jobs/smoke.txt.in:10 msgid "Check failed result from shell test case" msgstr "" #. description #: ../jobs/smoke.txt.in:17 msgid "Check job is executed when dependency succeeds" msgstr "" #. description #: ../jobs/smoke.txt.in:24 msgid "Check job result is set to uninitiated when dependency fails" msgstr "" #. description #: ../jobs/smoke.txt.in:31 msgid "Check job is executed when requirements are met" msgstr "" #. description #: ../jobs/smoke.txt.in:38 msgid "" "Check job result is set to \"not required on this system\" when requirements " "are not met" msgstr "" #. description #: ../jobs/smoke.txt.in:43 msgid "" "PURPOSE:\n" " This test checks that the manual plugin works fine\n" "STEPS:\n" " 1. Add a comment\n" " 2. Set the result as passed\n" "VERIFICATION:\n" " Check that in the report the result is passed and the comment is " "displayed" msgstr "" #. description #: ../jobs/sniff.txt.in:36 msgid "" "PURPOSE:\n" " Simulates a failure by rebooting the machine\n" "STEPS:\n" " 1. Click test to trigger a reboot\n" " 2. Select \"Continue\" once logged back in and checkbox is restarted\n" "VERIFICATION:\n" " You won't see the user-verify" msgstr "" #. description #: ../jobs/sniff.txt.in:47 msgid "" "PURPOSE:\n" " If Recovery is successful, you will see this test on restarting checkbox, " "not\n" " sniff4.\n" "STEPS:\n" " 1. Click Yes\n" "VERIFICATION:\n" " None Necessary, this is a bogus test" msgstr "" #. description #: ../jobs/sniff.txt.in:68 msgid "" "PURPOSE:\n" " To sniff things out\n" "STEPS:\n" " 1. Click Yes\n" "VERIFICATION:\n" " None Necessary, this is a bogus test" msgstr "" #. description #: ../jobs/stress.txt.in:7 msgid "" "PURPOSE:\n" " Create jobs that use the CPU as much as possible for two hours. The test " "is considered passed if the system does not freeze." msgstr "" #. description #: ../jobs/stress.txt.in:28 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to " "hibernate/resume for 30 cycles" msgstr "" #. description #: ../jobs/stress.txt.in:41 msgid "Attaches the log from the 30 cycle Hibernate/Resume test if it exists" msgstr "" #. description #: ../jobs/stress.txt.in:59 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to " "suspend/resume for 30 cycles." msgstr "" #. description #: ../jobs/stress.txt.in:67 msgid "" "Automated check of the 30 cycle hibernate log for errors detected by fwts." msgstr "" #. description #: ../jobs/stress.txt.in:74 msgid "Attaches the log from the 30 cycle Suspend/Resume test if it exists" msgstr "" #. description #: ../jobs/stress.txt.in:97 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to " "hibernate/resume for 250 cycles" msgstr "" #. description #: ../jobs/stress.txt.in:104 msgid "" "Attaches the log from the 250 cycle Hibernate/Resume test if it exists" msgstr "" #. description #: ../jobs/stress.txt.in:120 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to " "suspend/resume for 250 cycles." msgstr "" #. description #: ../jobs/stress.txt.in:127 msgid "Attaches the log from the 250 cycle Suspend/Resume test if it exists" msgstr "" #. description #: ../jobs/stress.txt.in:133 ../jobs/suspend.txt.in:265 msgid "" "Checks the sleep times to ensure that a machine suspends and resumes within " "a given threshold" msgstr "" #. description #: ../jobs/stress.txt.in:144 msgid "Stress reboot system (100 cycles)" msgstr "" #. description #: ../jobs/stress.txt.in:160 msgid "Stress poweroff system (100 cycles)" msgstr "" #. description #: ../jobs/stress.txt.in:172 msgid "Check logs for the stress reboot (100 cycles) test case" msgstr "" #. description #: ../jobs/stress.txt.in:184 msgid "Check logs for the stress poweroff (100 cycles) test case" msgstr "" #. description #: ../jobs/stress.txt.in:199 msgid "Run the graphics stress test. This test can take a few minutes." msgstr "" #. description #: ../jobs/stress.txt.in:208 msgid "Attaches the graphics stress results to the submission." msgstr "" #. description #: ../jobs/stress.txt.in:214 msgid "Runs a test that transfers 100 10MB files 3 times to usb." msgstr "" #. description #: ../jobs/stress.txt.in:220 msgid "Runs a test that transfers 100 10MB files 3 times to a SDHC card." msgstr "" #. description #: ../jobs/stress.txt.in:227 msgid "Ping ubuntu.com and restart network interfaces 100 times" msgstr "" #. description #: ../jobs/stress.txt.in:237 msgid "" "PURPOSE:\n" " To make sure that stressing the wifi hotkey does not cause applets to " "disappear from the panel or the system to lock up\n" "STEPS:\n" " 1. Log in to desktop\n" " 2. Press wifi hotkey at a rate of 1 press per second and slowly increase " "the speed of the tap, until you are tapping as fast as possible\n" "VERIFICATION:\n" " Verify the system is not frozen and the wifi and bluetooth applets are " "still visible and functional" msgstr "" #. description #: ../jobs/suspend.txt.in:5 msgid "Record the current network before suspending." msgstr "" #. description #: ../jobs/suspend.txt.in:11 msgid "Record the current resolution before suspending." msgstr "" #. description #: ../jobs/suspend.txt.in:20 msgid "Record mixer settings before suspending." msgstr "" #. description #: ../jobs/suspend.txt.in:26 msgid "Verify that all the CPUs are online before suspending" msgstr "" #. description #: ../jobs/suspend.txt.in:32 msgid "" "Dumps memory info to a file for comparison after suspend test has been run" msgstr "" #. description #: ../jobs/suspend.txt.in:42 msgid "" "This test disconnects all connections and then connects to the wireless " "interface. It then checks the connection to confirm it's working as expected." msgstr "" #. description #: ../jobs/suspend.txt.in:200 msgid "" "PURPOSE:\n" " This test will send the image 'JPEG_Color_Image_Ubuntu.jpg' to a " "specified device\n" "STEPS:\n" " 1. Make sure Bluetooth is enabled by checking the Bluetooth indicator " "applet\n" " 2. Click \"Test\" and you will be prompted to enter the Bluetooth device " "name of a device that can accept file transfers (It may take a few moments " "after entering the name for the file to begin sending)\n" " 3. Accept any prompts that appear on both devices\n" "VERIFICATION:\n" " Was the data correctly transferred?" msgstr "" #. description #: ../jobs/suspend.txt.in:226 msgid "" "PURPOSE:\n" " This test will check suspend and resume\n" "STEPS:\n" " 1. Click \"Test\" and your system will suspend for about 30 - 60 " "seconds\n" " 2. Observe the Power LED to see if it blinks or changes color during " "suspend\n" " 3. If your system does not wake itself up after 60 seconds, please press " "the power button momentarily to wake the system manually\n" " 4. If your system fails to wake at all and must be rebooted, restart " "System Testing after reboot and mark this test as Failed\n" "VERIFICATION:\n" " Did your system suspend and resume correctly?\n" " (NOTE: Please only consider whether the system successfully suspended " "and resumed. Power/Suspend LED verification will occur after this test is " "completed.)" msgstr "" #. description #: ../jobs/suspend.txt.in:243 msgid "This is the automated version of suspend/suspend_advanced." msgstr "" #. description #: ../jobs/suspend.txt.in:253 msgid "" "Automated check of the suspend log to look for errors reported by fwts" msgstr "" #. description #: ../jobs/suspend.txt.in:274 msgid "" "PURPOSE:\n" " Wake up by USB keyboard\n" "STEPS:\n" " 1. Enable \"Wake by USB KB/Mouse\" item in BIOS\n" " 2. Press \"Test\" to enter suspend (S3) mode\n" " 3. Press any key of USB keyboard to wake system up\n" "VERIFICATION:\n" " Did the system wake up from suspend mode when you pressed a keyboard key?" msgstr "" #. description #: ../jobs/suspend.txt.in:290 msgid "" "PURPOSE:\n" " Wake up by USB mouse\n" "STEPS:\n" " 1. Enable \"Wake by USB KB/Mouse\" item in BIOS\n" " 2. Press \"Test\" to enter suspend (S3) mode\n" " 3. Press any button of USB mouse to wake system up\n" "VERIFICATION:\n" " Did the system wake up from suspend mode when you pressed the mouse " "button?" msgstr "" #. description #: ../jobs/suspend.txt.in:304 msgid "Test the network after resuming." msgstr "" #. description #: ../jobs/suspend.txt.in:311 msgid "" "Test to see that we have the same resolution after resuming as before." msgstr "" #. description #: ../jobs/suspend.txt.in:332 msgid "" "Verify that mixer settings after suspend are the same as before suspend." msgstr "" #. description #: ../jobs/suspend.txt.in:347 msgid "Verify that all CPUs are online after resuming." msgstr "" #. description #: ../jobs/suspend.txt.in:362 msgid "Verify that all memory is available after resuming from suspend." msgstr "" #. description #: ../jobs/suspend.txt.in:370 msgid "" "PURPOSE:\n" " This test will check that the display is correct after suspend and " "resume\n" "STEPS:\n" " 1. Check that your display does not show up visual artifacts after " "resuming.\n" "VERIFICATION:\n" " Does the display work normally after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:385 msgid "" "This test checks that the wireless interface is working after suspending the " "system. It disconnects all interfaces and then connects to the wireless " "interface and checks that the connection is working as expected." msgstr "" #. description #: ../jobs/suspend.txt.in:488 msgid "" "Tests that the systems wireless hardware can connect to a router using WPA " "security and the 802.11b/g protocols after the system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:502 msgid "" "Tests that the systems wireless hardware can connect to a router using no " "security and the 802.11b/g protocols after the system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:516 msgid "" "Tests that the systems wireless hardware can connect to a router using WPA " "security and the 802.11n protocol after the system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:530 msgid "" "Tests that the systems wireless hardware can connect to a router using no " "security and the 802.11n protocol after the system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:610 ../jobs/wireless.txt.in:139 msgid "" "PURPOSE:\n" " Tests that the systems wireless hardware can connect to a router using " "WPA\n" " security and the 802.11b/g protocols.\n" "STEPS:\n" " 1. Open your routers configuration tool\n" " 2. Change the settings to only accept connections on the B and G " "wireless bands\n" " 3. Make sure the SSID is set to ROUTER_SSID\n" " 4. Change the security settings to use WPA2 and ensure the PSK matches " "that set in ROUTER_PSK\n" " 5. Click the 'Test' button to create a connection to the router and test " "the connection\n" "VERIFICATION:\n" " Verification is automated, do not change the automatically selected " "result." msgstr "" #. description #: ../jobs/suspend.txt.in:633 ../jobs/wireless.txt.in:161 msgid "" "PURPOSE:\n" " Tests that the systems wireless hardware can connect to a router using\n" " no security and the 802.11b/g protocols.\n" "STEPS:\n" " 1. Open your routers configuration tool\n" " 2. Change the settings to only accept connections on the B and G " "wireless bands\n" " 3. Make sure the SSID is set to ROUTER_SSID\n" " 4. Change the security settings to use no security\n" " 5. Click the 'Test' button to create a connection to the router and test " "the connection\n" "VERIFICATION:\n" " Verification is automated, do not change the automatically selected " "result." msgstr "" #. description #: ../jobs/suspend.txt.in:656 ../jobs/wireless.txt.in:185 msgid "" "PURPOSE:\n" " Tests that the systems wireless hardware can connect to a router using " "WPA\n" " security and the 802.11n protocols.\n" "STEPS:\n" " 1. Open your routers configuration tool\n" " 2. Change the settings to only accept connections on the N wireless " "band\n" " 3. Make sure the SSID is set to ROUTER_SSID\n" " 4. Change the security settings to use WPA2 and ensure the PSK matches " "that set in ROUTER_PSK\n" " 5. Click the 'Test' button to create a connection to the router and test " "the connection\n" "VERIFICATION:\n" " Verification is automated, do not change the automatically selected " "result." msgstr "" #. description #: ../jobs/suspend.txt.in:679 ../jobs/wireless.txt.in:209 msgid "" "PURPOSE:\n" " Tests that the systems wireless hardware can connect to a router using\n" " no security and the 802.11n protocol.\n" "STEPS:\n" " 1. Open your routers configuration tool\n" " 2. Change the settings to only accept connections on the N wireless " "band\n" " 3. Make sure the SSID is set to ROUTER_SSID\n" " 4. Change the security settings to use no security\n" " 5. Click the 'Test' button to create a connection to the router and test " "the connection\n" "VERIFICATION:\n" " Verification is automated, do not change the automatically selected " "result." msgstr "" #. description #: ../jobs/suspend.txt.in:760 msgid "" "This test grabs the hardware address of the bluetooth adapter after suspend " "and compares it to the address grabbed before suspend." msgstr "" #. description #: ../jobs/suspend.txt.in:872 msgid "" "This is an automated Bluetooth file transfer test. It sends an image to the " "device specified by the BTDEVADDR environment variable." msgstr "" #. description #: ../jobs/suspend.txt.in:928 msgid "" "This is an automated Bluetooth test. It emulates browsing on a remote device " "specified by the BTDEVADDR environment variable." msgstr "" #. description #: ../jobs/suspend.txt.in:984 msgid "" "This is an automated Bluetooth test. It receives the given file from a " "remote host specified by the BTDEVADDR environment variable" msgstr "" #. description #: ../jobs/suspend.txt.in:996 msgid "" "PURPOSE:\n" " This test will send the image 'JPEG_Color_Image_Ubuntu.jpg' to a " "specified device\n" "STEPS:\n" " 1. Click \"Test\" and you will be prompted to enter the Bluetooth device " "name of a device that can accept file transfers (It may take a few moments " "after entering the name for the file to begin sending)\n" " 2. Accept any prompts that appear on both devices\n" "VERIFICATION:\n" " Was the data correctly transferred?" msgstr "" #. description #: ../jobs/suspend.txt.in:1011 msgid "" "PURPOSE:\n" " This test will cycle through the detected display modes\n" "STEPS:\n" " 1. Click \"Test\" and the display will cycle trough the display modes\n" "VERIFICATION:\n" " Did your display look fine in the detected mode?" msgstr "" #. description #: ../jobs/suspend.txt.in:1024 msgid "" "This test will check to make sure supported video modes work after a suspend " "and resume. This is done automatically by taking screenshots and uploading " "them as an attachment." msgstr "" #. description #: ../jobs/suspend.txt.in:1033 msgid "" "This attaches screenshots from the " "suspend/cycle_resolutions_after_suspend_auto test to the results submission." msgstr "" #. description #: ../jobs/suspend.txt.in:1064 msgid "" "This will check to make sure that your audio device works properly after a " "suspend and resume. This may work fine with speakers and onboard " "microphone, however, it works best if used with a cable connecting the audio-" "out jack to the audio-in jack." msgstr "" #. description #: ../jobs/suspend.txt.in:1070 msgid "Attaches the log from the single suspend/resume test to the results" msgstr "" #. description #: ../jobs/suspend.txt.in:1079 msgid "" "PURPOSE:\n" " Take a screengrab of the current screen after suspend (logged on Unity " "desktop)\n" "STEPS:\n" " 1. Take picture using USB webcam\n" "VERIFICATION:\n" " Review attachment manually later" msgstr "" #. description #: ../jobs/suspend.txt.in:1102 msgid "" "PURPOSE:\n" " Do some challenging operations then check for lockup on the GPU\n" "STEPS:\n" " 1. Create 2 glxgears windows and move them quickly\n" " 2. Switch workspaces with wmctrl\n" " 3. Launch an HTML5 video playback in firefox\n" "VERIFICATION:\n" " After a 60s workload, check kern.log for reported GPU errors" msgstr "" #. description #: ../jobs/suspend.txt.in:1130 msgid "" "Checks the length of time it takes to reconnect an existing wifi connection " "after a suspend/resume cycle." msgstr "" #. description #: ../jobs/suspend.txt.in:1152 msgid "" "Checks the length of time it takes to reconnect an existing wired " "connection\n" " after a suspend/resume cycle." msgstr "" #. description #: ../jobs/suspend.txt.in:1160 msgid "" "PURPOSE:\n" " Validate that the power LED operated the same after resuming from " "suspend\n" "STEPS:\n" " 1. Power LED should be on while device is switched on\n" "VERIFICATION:\n" " Does the power LED remain on after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1172 msgid "" "PURPOSE:\n" " Validate that the battery light shows charging status after resuming " "from suspend\n" "STEPS:\n" " 1. Let system run on battery for a while\n" " 2. Plug in AC plug\n" "VERIFICATION:\n" " Did the battery indicator LED still turn orange after resuming from " "suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1184 msgid "" "PURPOSE:\n" " Validate that the battery LED properly displays charged status after " "resuming from suspend\n" "STEPS:\n" " 1. Let system run on battery for a short time\n" " 2. Plug in AC\n" " 3. Let system run on AC\n" "VERIFICATION:\n" " Does the orange battery LED still shut off when system is fully charged " "after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1197 msgid "" "PURPOSE:\n" " Validate that the battery LED indicated low power after resuming from " "suspend\n" "STEPS:\n" " 1. Let system run on battery for several hours\n" " 2. Monitor battery LED carefully\n" "VERIFICATION:\n" " Does the LED light orange when battery is low after resuming from " "suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1210 msgid "" "PURPOSE:\n" " Validate that the HDD LED still operates as expected after resuming from " "suspend\n" "STEPS:\n" " 1. Select \"Test\" to write and read a temporary file for a few seconds\n" " 2. HDD LED should blink when writing to/reading from HDD\n" "VERIFICATION:\n" " Did the HDD LED still blink with HDD activity after resuming from " "suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1223 msgid "" "PURPOSE:\n" " Validate that the numeric keypad LED operates the same before and after " "resuming from suspend\n" "STEPS:\n" " 1. Press \"Block Num\" key to toggle numeric keypad LED\n" " 2. Click on the \"Test\" button to open a window to verify your typing\n" " 3. Type using the numeric keypad both when the LED is on and off\n" "VERIFICATION:\n" " 1. Numeric keypad LED status should toggle everytime the \"Block Num\" " "key is pressed\n" " 2. Numbers should only be entered in the keyboard verification window " "when the LED is on" msgstr "" #. description #: ../jobs/suspend.txt.in:1237 msgid "" "PURPOSE:\n" " Validate that the Caps Lock key operates the same before and after " "resuming from suspend\n" "STEPS:\n" " 1. Press \"Block Cap Keys\" to activate/deactivate cap keys blocking\n" " 2. Cap Keys LED should be switched on/off every time the key is pressed\n" "VERIFICATION:\n" " Did the Cap Keys LED light as expected after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1249 msgid "" "PURPOSE:\n" " WLAN LED verification after resuming from suspend\n" "STEPS:\n" " 1. Make sure WLAN connection is established\n" " 2. WLAN LED should light\n" "VERIFICATION:\n" " Did the WLAN LED light as expected after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1261 msgid "" "PURPOSE:\n" " Validate that WLAN LED shuts off when disabled after resuming from " "suspend\n" "STEPS:\n" " 1. Connect to AP\n" " 2. Use Physical switch to disable WLAN\n" " 3. Re-enable\n" " 4. Use Network-Manager to disable WLAN\n" "VERIFICATION:\n" " Did the LED turn off then WLAN is disabled after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1275 msgid "" "PURPOSE:\n" " Validate that the Bluetooth LED turns on and off when BT is " "enabled/disabled after resuming from suspend\n" "STEPS:\n" " 1. Switch bluetooth off from a hardware switch (if present)\n" " 2. Switch bluetooth back on\n" " 3. Switch bluetooth off from the panel applet\n" " 4. Switch bluetooth back on\n" "VERIFICATION:\n" " Did the bluetooth LED turn off and on twice after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1292 msgid "" "PURPOSE:\n" " Validate that the camera LED still works as expected after resuming from " "suspend\n" "STEPS:\n" " 1. Select Test to activate camera\n" " 2. Camera LED should light for a few seconds\n" "VERIFICATION:\n" " Did the camera LED still turn on and off after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1304 msgid "" "PURPOSE:\n" " Touchpad LED verification after resuming from suspend\n" "STEPS:\n" " 1. Click on the touchpad button or press key combination to " "enable/disable touchpad button\n" " 2. Slide your finger on the touchpad\n" "VERIFICATION:\n" " 1. Touchpad LED status should toggle everytime the button is clicked or " "the key combination is pressed\n" " 2. When the LED is on, the mouse pointer should move on touchpad usage\n" " 3. When the LED is off, the mouse pointer should not move on touchpad " "usage" msgstr "" #. description #: ../jobs/suspend.txt.in:1318 msgid "" "PURPOSE:\n" " Validate Wireless (WLAN + Bluetooth) LED operated the same after " "resuming from suspend\n" "STEPS:\n" " 1. Make sure WLAN connection is established and Bluetooth is enabled.\n" " 2. WLAN/Bluetooth LED should light\n" " 3. Switch WLAN and Bluetooth off from a hardware switch (if present)\n" " 4. Switch them back on\n" " 5. Switch WLAN and Bluetooth off from the panel applet\n" " 6. Switch them back on\n" "VERIFICATION:\n" " Did the WLAN/Bluetooth LED light as expected after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1335 msgid "" "PURPOSE:\n" " This test will test the brightness key after resuming from suspend\n" "STEPS:\n" " 1. Press the brightness buttons on the keyboard\n" "VERIFICATION:\n" " Did the brightness change following to your key presses after resuming " "from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1350 msgid "" "PURPOSE:\n" " This test will test the volume keys of your keyboard after resuming from " "suspend\n" "STEPS:\n" " Skip this test if your computer has no volume keys.\n" " 1. Click test to open a window on which to test the volume keys.\n" " 2. If all the keys work, the test will be marked as passed.\n" "VERIFICATION:\n" " Did the volume change following to your key presses?" msgstr "" #. description #: ../jobs/suspend.txt.in:1367 msgid "" "PURPOSE:\n" " This test will test the mute key of your keyboard after resuming from " "suspend\n" "STEPS:\n" " 1. Click test to open a window on which to test the mute key.\n" " 2. If the key works, the test will pass and the window will close.\n" "VERIFICATION:\n" " Did the volume mute following your key presses?" msgstr "" #. description #: ../jobs/suspend.txt.in:1381 msgid "" "PURPOSE:\n" " This test will test the sleep key after resuming from suspend\n" "STEPS:\n" " 1. Press the sleep key on the keyboard\n" " 2. Wake your system up by pressing the power button\n" "VERIFICATION:\n" " Did the system go to sleep after pressing the sleep key after resuming " "from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1396 msgid "" "PURPOSE:\n" " This test will test the battery information key after resuming from " "suspend\n" "STEPS:\n" " Skip this test if you do not have a Battery Button.\n" " 1. Click Test to begin\n" " 2. Press the Battery Info button (or combo like Fn+F3)\n" " 3: Close the Power Statistics tool if it opens\n" "VERIFICATION:\n" " Did the Battery Info key work as expected after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1411 msgid "" "PURPOSE:\n" " This test will test the wireless key after resuming from suspend\n" "STEPS:\n" " 1. Press the wireless key on the keyboard\n" " 2. Press the same key again\n" "VERIFICATION:\n" " Did the wireless go off on the first press and on again on the second " "after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1427 msgid "" "PURPOSE:\n" " This test will test the media keys of your keyboard after resuming from " "suspend\n" "STEPS:\n" " Skip this test if your computer has no media keys.\n" " 1. Click test to open a window on which to test the media keys.\n" " 2. If all the keys work, the test will be marked as passed.\n" "VERIFICATION:\n" " Do the keys work as expected after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1444 msgid "" "PURPOSE:\n" " This test will test the super key of your keyboard after resuming from " "suspend\n" "STEPS:\n" " 1. Click test to open a window on which to test the super key.\n" " 2. If the key works, the test will pass and the window will close.\n" "VERIFICATION:\n" " Does the super key work as expected after resuming from suspend?" msgstr "" #. description #: ../jobs/suspend.txt.in:1457 msgid "" "PURPOSE:\n" " Validate that the External Video hot key is working as expected after " "resuming from suspend\n" "STEPS:\n" " 1. Plug in an external monitor\n" " 2. Press the display hot key to change the monitors configuration\n" "VERIFICATION:\n" " Check that the video signal can be mirrored, extended, displayed on " "external or onboard only, after resuming from suspend." msgstr "" #. description #: ../jobs/suspend.txt.in:1470 msgid "" "PURPOSE:\n" " Verify touchpad hotkey toggles touchpad functionality on and off after " "resuming from suspend\n" "STEPS:\n" " 1. Verify the touchpad is functional\n" " 2. Tap the touchpad toggle hotkey\n" " 3. Tap the touchpad toggle hotkey again\n" "VERIFICATION:\n" " Verify the touchpad has been disabled and re-enabled." msgstr "" #. description #: ../jobs/suspend.txt.in:1486 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the insertion of\n" " a USB storage device after suspend and resume.\n" "STEPS:\n" " 1. Click \"Test\" and insert a USB storage device (pen-drive/HDD).\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not unplug the device after the test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1506 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the insertion of\n" " a USB 3.0 storage device after suspend and resume.\n" "STEPS:\n" " 1. Click \"Test\" and insert a USB 3.0 storage device (pen-drive/HDD) " "in\n" " a USB 3.0 port. (Note: this test will time-out after 20 seconds.)\n" " 2. Do not unplug the device after the test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1524 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal of\n" " a USB storage device after suspend.\n" "STEPS:\n" " 1. Click \"Test\" and remove the USB device.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1543 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal of\n" " a USB 3.0 storage device after suspend\n" "STEPS:\n" " 1. Click \"Test\" and remove the USB 3.0 device.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1560 msgid "" "This test is automated and executes after the " "suspend/usb_insert_after_suspend test is run." msgstr "" #. description #: ../jobs/suspend.txt.in:1572 msgid "" "This test is automated and executes after the " "suspend/usb3_insert_after_suspend test is run." msgstr "" #. description #: ../jobs/suspend.txt.in:1582 ../jobs/usb.txt.in:172 msgid "" "This is an automated version of usb/storage-automated and assumes that the " "server has usb storage devices plugged in prior to checkbox execution. It is " "intended for servers and SRU automated testing." msgstr "" #. description #: ../jobs/suspend.txt.in:1595 ../jobs/usb.txt.in:184 msgid "" "This is an automated version of usb3/storage-automated and assumes that the " "server has usb 3.0 storage devices plugged in prior to checkbox execution. " "It is intended for servers and SRU automated testing." msgstr "" #. description #: ../jobs/suspend.txt.in:1628 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of an MMC card after the system has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert an MMC card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1647 msgid "" "This test is automated and executes after the mediacard/mmc-insert-after-" "suspend test is run. It tests reading and writing to the MMC card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1656 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal\n" " of an MMC card from the systems card reader after the system has been " "suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the MMC card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1672 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of an UNLOCKED SD card after the system\n" " has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert an UNLOCKED SD card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1692 msgid "" "This test is automated and executes after the mediacard/sd-insert-after-" "suspend test is run. It tests reading and writing to the SD card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1701 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects\n" " the removal of an SD card from the systems card reader\n" " after the system has been suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the SD card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1718 msgid "" "PURPOSE:\n" " This test will check that the systems media card reader can\n" " detect the insertion of an UNLOCKED SDHC media card after the\n" " system has been suspended\n" "STEPS:\n" " 1. Click \"Test\" and insert an UNLOCKED SDHC card into the reader.\n" " If a file browser opens up, you can safely close it.\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not remove the device after this test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/suspend.txt.in:1738 msgid "" "This test is automated and executes after the mediacard/sdhc-insert-after-" "suspend test is run. It tests reading and writing to the SDHC card after the " "system has been suspended." msgstr "" #. description #: ../jobs/suspend.txt.in:1747 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal\n" " of an SDHC card from the systems card reader after the system has been " "suspended.\n" "STEPS:\n" " 1. Click \"Test\" and remove the SDHC card from the reader.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/touchpad.txt.in:5 msgid "" "PURPOSE:\n" " Touchpad user-verify\n" "STEPS:\n" " 1. Make sure that touchpad is enabled.\n" " 2. Move cursor using the touchpad.\n" "VERIFICATION:\n" " Did the cursor move?" msgstr "" #. description #: ../jobs/touchpad.txt.in:21 msgid "" "PURPOSE:\n" " Touchpad horizontal scroll verification\n" "STEPS:\n" " 1. Select \"Test\" when ready and place your cursor within the borders " "of the displayed test window.\n" " 2. Verify that you can move the horizontal slider by moving your finger " "right and left in the lower part of the touchpad.\n" "VERIFICATION:\n" " Could you scroll right and left?" msgstr "" #. description #: ../jobs/touchpad.txt.in:37 msgid "" "PURPOSE:\n" " Touchpad vertical scroll verification\n" "STEPS:\n" " 1. Select \"Test\" when ready and place your cursor within the borders " "of the displayed test window.\n" " 2. Verify that you can move the vertical slider by moving your finger up " "and down in the right part of the touchpad.\n" "VERIFICATION:\n" " Could you scroll up and down?" msgstr "" #. description #: ../jobs/touchpad.txt.in:53 msgid "" "Determine whether the touchpad is detected as a singletouch device " "automatically." msgstr "" #. description #: ../jobs/touchpad.txt.in:62 msgid "" "Determine whether the touchpad is detected as a multitouch device " "automatically." msgstr "" #. description #: ../jobs/touchpad.txt.in:69 msgid "" "PURPOSE:\n" " Touchpad manual detection of multitouch.\n" "STEPS:\n" " 1. Look at the specifications for your system.\n" "VERIFICATION:\n" " Is the touchpad supposed to be multitouch?" msgstr "" #. description #: ../jobs/suspend.txt.in:1995 ../jobs/touchscreen.txt.in:35 msgid "" "PURPOSE:\n" " Check touchscreen tap recognition\n" "STEPS:\n" " 1. Tap an object on the screen with finger. The cursor should jump to " "location tapped and object should highlight\n" "VERIFICATION:\n" " Does tap recognition work?" msgstr "" #. description #: ../jobs/touchscreen.txt.in:47 msgid "" "PURPOSE:\n" " Check touchscreen drag & drop\n" "STEPS:\n" " 1. Double tap, hold, and drag an object on the desktop\n" " 2. Drop the object in a different location\n" "VERIFICATION:\n" " Does the object select and drag and drop?" msgstr "" #. description #: ../jobs/touchscreen.txt.in:60 msgid "" "PURPOSE:\n" " Check touchscreen pinch gesture for zoom\n" "STEPS:\n" " 1. Place two fingers on the screen and pinch them together\n" " 2. Place two fingers on the screen and move then apart\n" "VERIFICATION:\n" " Does the screen zoom in and out?" msgstr "" #. description #: ../jobs/touchscreen.txt.in:7 msgid "" "Determine whether the screen is detected as a non-touch device automatically." msgstr "" #. description #: ../jobs/touchscreen.txt.in:16 msgid "" "Determine whether the screen is detected as a multitouch device " "automatically." msgstr "" #. description #: ../jobs/touchscreen.txt.in:23 msgid "" "PURPOSE:\n" " Touchscreen manual detection of multitouch.\n" "STEPS:\n" " 1. Look at the specifications for your system.\n" "VERIFICATION:\n" " Is the screen supposed to be multitouch?" msgstr "" #. description #: ../jobs/usb.txt.in:5 msgid "Detects and shows USB devices attached to this system." msgstr "" #. description #: ../jobs/usb.txt.in:12 msgid "" "PURPOSE:\n" " This test will check that your system detects USB storage devices.\n" "STEPS:\n" " 1. Plug in one or more USB keys or hard drives.\n" " 2. Click on \"Test\".\n" "INFO:\n" " $output\n" "VERIFICATION:\n" " Were the drives detected?" msgstr "" #. description #: ../jobs/usb.txt.in:28 msgid "" "PURPOSE:\n" " This test will check that you can use a USB HID device\n" "STEPS:\n" " 1. Enable either a USB mouse or keyboard\n" " 2. For mice, perform actions such as moving the pointer, right and left " "button clicks and double clicks\n" " 3. For keyboards, click the Test button to lauch a small tool. Type some " "text and close the tool.\n" "VERIFICATION:\n" " Did the device work as expected?" msgstr "" #. description #: ../jobs/usb.txt.in:39 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the insertion of\n" " a USB storage device\n" "STEPS:\n" " 1. Click \"Test\" and insert a USB storage device (pen-drive/HDD).\n" " (Note: this test will time-out after 20 seconds.)\n" " 2. Do not unplug the device after the test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/usb.txt.in:56 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the insertion of\n" " a USB 3.0 storage device\n" "STEPS:\n" " 1. Click \"Test\" and insert a USB 3.0 storage device (pen-drive/HDD) " "in\n" " a USB 3.0 port. (Note: this test will time-out after 20 seconds.)\n" " 2. Do not unplug the device after the test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/usb.txt.in:82 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal of\n" " a USB storage device\n" "STEPS:\n" " 1. Click \"Test\" and remove the USB device.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/usb.txt.in:100 msgid "" "PURPOSE:\n" " This test will check that the system correctly detects the removal of\n" " a USB 3.0 storage device\n" "STEPS:\n" " 1. Click \"Test\" and remove the USB 3.0 device.\n" " (Note: this test will time-out after 20 seconds.)\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/usb.txt.in:117 msgid "" "PURPOSE:\n" " This test will check your USB connection.\n" "STEPS:\n" " 1. Plug a USB HDD or thumbdrive into the computer.\n" " 2. An icon should appear on the Launcher.\n" " 3. Click \"Test\" to begin the test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/usb.txt.in:136 msgid "" "PURPOSE:\n" " This test will check your USB 3.0 connection.\n" "STEPS:\n" " 1. Plug a USB 3.0 HDD or thumbdrive into a USB 3.0 port in the " "computer.\n" " 2. An icon should appear on the Launcher.\n" " 3. Click \"Test\" to begin the test.\n" "VERIFICATION:\n" " The verification of this test is automated. Do not change the\n" " automatically selected result." msgstr "" #. description #: ../jobs/usb.txt.in:153 msgid "This test is automated and executes after the usb/insert test is run." msgstr "" #. description #: ../jobs/usb.txt.in:164 msgid "" "This test is automated and executes after the usb3/insert test is run." msgstr "" #. description #: ../jobs/usb.txt.in:191 msgid "" "PURPOSE:\n" " This test will check your USB connection.\n" "STEPS:\n" " 1. Connect a USB storage device to an external USB slot on this " "computer.\n" " 2. An icon should appear on the Launcher.\n" " 3. Confirm that the icon appears.\n" " 4. Eject the device.\n" " 5. Repeat with each external USB slot.\n" "VERIFICATION:\n" " Do all USB slots work with the device?" msgstr "" #. description #: ../jobs/usb.txt.in:190 msgid "" "Verify USB3 external storage performs at or above baseline performance" msgstr "" #. description #: ../jobs/user_apps.txt.in:6 msgid "" "PURPOSE:\n" " This test will check that the update manager can find updates.\n" "STEPS:\n" " 1. Click Test to launch update-manager.\n" " 2. Follow the prompts and if updates are found, install them.\n" " 3. When Update Manager has finished, please close the app by clicking the " "Close button in the lower right corner.\n" "VERIFICATION:\n" " Did Update manager find and install updates (Pass if no updates are found,\n" " but Fail if updates are found but not installed)" msgstr "" #. description #: ../jobs/user_apps.txt.in:22 msgid "" "PURPOSE:\n" " This test will check that the file browser can create a new folder.\n" "STEPS:\n" " 1. Click Test to open the File Browser.\n" " 2. On the menu bar, click File -> Create Folder.\n" " 3. In the name box for the new folder, enter the name Test Folder and hit " "Enter.\n" " 4. Close the File browser.\n" "VERIFICATION:\n" " Do you now have a new folder called Test Folder?" msgstr "" #. description #: ../jobs/user_apps.txt.in:37 msgid "" "PURPOSE:\n" " This test will check that the file browser can copy a folder\n" "STEPS:\n" " 1. Click Test to open the File Browser.\n" " 2. Right click on the folder called Test Folder and click on Copy.\n" " 3. Right Click on any white area in the window and click on Paste.\n" " 4. Right click on the folder called Test Folder(copy) and click Rename.\n" " 5. Enter the name Test Data in the name box and hit Enter.\n" " 6. Close the File browser.\n" "VERIFICATION:\n" " Do you now have a folder called Test Data?" msgstr "" #. description #: ../jobs/user_apps.txt.in:54 msgid "" "PURPOSE:\n" " This test will verify that the file browser can move a folder.\n" "STEPS:\n" " 1. Click Test to open the File Browser.\n" " 2. Click and drag the folder called Test Data onto the icon called Test " "Folder.\n" " 3. Release the button.\n" " 4. Double click the folder called Test Folder to open it up.\n" " 5. Close the File Browser.\n" "VERIFICATION:\n" " Was the folder called Test Data successfully moved into the folder called " "Test Folder?" msgstr "" #. description #: ../jobs/user_apps.txt.in:70 msgid "" "PURPOSE:\n" " This test will check that the file browser can create a new file.\n" "STEPS:\n" " 1. Click Select Test to open the File Browser.\n" " 2. Right click in the white space and click Create Document -> Empty " "Document.\n" " 3. Enter the name Test File 1 in the name box and hit Enter.\n" " 4. Close the File browser.\n" "VERIFICATION:\n" " Do you now have a file called Test File 1?" msgstr "" #. description #: ../jobs/user_apps.txt.in:85 msgid "" "PURPOSE:\n" " This test will check that the file browser can copy a file.\n" "STEPS:\n" " 1. Click Test to open the File Browser.\n" " 2. Right click on the file called Test File 1 and click Copy.\n" " 3. Right click in the white space and click Paste.\n" " 4. Right click on the file called Test File 1(copy) and click Rename.\n" " 5. Enter the name Test File 2 in the name box and hit Enter.\n" " 6. Close the File Browser.\n" "VERIFICATION:\n" " Do you now have a file called Test File 2?" msgstr "" #. description #: ../jobs/user_apps.txt.in:102 msgid "" "PURPOSE:\n" " This test will check that the file browser can move a file.\n" "STEPS:\n" " 1. Click Test to open the File Browser.\n" " 2. Click and drag the file called Test File 2 onto the icon for the folder " "called Test Data.\n" " 3. Release the button.\n" " 4. Double click the icon for Test Data to open that folder up.\n" " 5. Close the File Browser.\n" "VERIFICATION:\n" " Was the file Test File 2 successfully moved into the Test Data folder?" msgstr "" #. description #: ../jobs/user_apps.txt.in:118 msgid "" "PURPOSE:\n" " This test will check that the file browser can delete a file.\n" "STEPS:\n" " 1. Click Test to open the File Browser.\n" " 2. Right click on the file called Test File 1 and click on Move To Trash.\n" " 3. Verify that Test File 1 has been removed.\n" " 4. Close the File Browser.\n" "VERIFICATION:\n" " Is Test File 1 now gone?" msgstr "" #. description #: ../jobs/user_apps.txt.in:133 msgid "" "PURPOSE:\n" " This test will check that the file browser can delete a folder.\n" "STEPS:\n" " 1. Click Test to open the File Browser.\n" " 2. Right click on the folder called Test Folder and click on Move To " "Trash.\n" " 3. Verify that the folder was deleted.\n" " 4. Close the file browser.\n" "VERIFICATION:\n" " Has Test Folder been successfully deleted?" msgstr "" #. description #: ../jobs/user_apps.txt.in:207 msgid "Common Document Types Test" msgstr "" #. description #: ../jobs/user_apps.txt.in:228 msgid "" "PURPOSE:\n" " This test will check that Firefox can render a basic web page.\n" "STEPS:\n" " 1. Select Test to launch Firefox and view the test web page.\n" "VERIFICATION:\n" " Did the Ubuntu Test page load correctly?" msgstr "" #. description #: ../jobs/user_apps.txt.in:241 msgid "" "PURPOSE:\n" " This test will check that Firefox can run a java applet in a web page. " "Note:\n" " this may require installing additional software to complete successfully.\n" "STEPS:\n" " 1. Select Test to open Firefox with the Java test page, and follow the " "instructions there.\n" "VERIFICATION:\n" " Did the applet display?" msgstr "" #. description #: ../jobs/user_apps.txt.in:241 msgid "" "PURPOSE:\n" " This test will check that Firefox can run flash applications. Note: this " "may\n" " require installing additional software to successfully complete.\n" "STEPS:\n" " 1. Select Test to launch Firefox and view a sample Flash test.\n" "VERIFICATION:\n" " Did you see the text?" msgstr "" #. description #: ../jobs/user_apps.txt.in:255 msgid "" "PURPOSE:\n" " This test will check that Firefox can play a Flash video. Note: this may\n" " require installing additional software to successfully complete.\n" "STEPS:\n" " 1. Select Test to launch Firefox and view a short flash video.\n" "VERIFICATION:\n" " Did the video play correctly?" msgstr "" #. description #: ../jobs/user_apps.txt.in:271 msgid "" "PURPOSE:\n" " This test will check that Firefox can play a Quicktime (.mov) video file.\n" " Note: this may require installing additional software to successfully\n" " complete.\n" "STEPS:\n" " 1. Select Test to launch Firefox with a sample video.\n" "VERIFICATION:\n" " Did the video play using a plugin?" msgstr "" #. description #: ../jobs/user_apps.txt.in:285 msgid "" "PURPOSE:\n" " This test will check that Empathy messaging client works.\n" "STEPS:\n" " 1. Select Test to launch Empathy.\n" " 2. Configure it to connect to the Facebook Chat service.\n" " 3. Once you have completed the test, please quit Empathy to continue here.\n" "VERIFICATION:\n" " Were you able to connect correctly and send/receive messages?" msgstr "" #. description #: ../jobs/user_apps.txt.in:299 msgid "" "PURPOSE:\n" " This test will check that Empathy messaging client works.\n" "STEPS:\n" " 1. Select Test to launch Empathy.\n" " 2. Configure it to connect to the Google Talk (gtalk) service.\n" " 3. Once you have completed the test, please quit Empathy to continue here.\n" "VERIFICATION:\n" " Were you able to connect correctly and send/receive messages?" msgstr "" #. description #: ../jobs/user_apps.txt.in:313 msgid "" "PURPOSE:\n" " This test will check that Empathy messaging client works.\n" "STEPS:\n" " 1. Select Test to launch Empathy.\n" " 2. Configure it to connect to the Jabber service.\n" " 3. Once you have completed the test, please quit Empathy to continue here.\n" "VERIFICATION:\n" " Were you able to connect correctly and send/receive messages?" msgstr "" #. description #: ../jobs/user_apps.txt.in:327 msgid "" "PURPOSE:\n" " This test will check that Empathy messaging client works.\n" "STEPS:\n" " 1. Select Test to launch Empathy.\n" " 2. Configure it to connect to the AOL Instant Messaging (AIM) service.\n" " 3. Once you have completed the test, please quit Empathy to continue here.\n" "VERIFICATION:\n" " Were you able to connect correctly and send/receive messages?" msgstr "" #. description #: ../jobs/user_apps.txt.in:341 msgid "" "PURPOSE:\n" " This test will check that Empathy messaging client works.\n" "STEPS:\n" " 1. Select Test to launch Empathy.\n" " 2. Configure it to connect to the Microsoft Network (MSN) service.\n" " 3. Once you have completed the test, please quit Empathy to continue here.\n" "VERIFICATION:\n" " Were you able to connect correctly and send/receive messages?" msgstr "" #. description #: ../jobs/user_apps.txt.in:355 msgid "" "PURPOSE:\n" " This test will check that Evolution works.\n" "STEPS:\n" " 1. Click the \"Test\" button to launch Evolution.\n" " 2. Configure it to connect to a POP3 account.\n" "VERIFICATION:\n" " Were you able to receive and read e-mail correctly?" msgstr "" #. description #: ../jobs/user_apps.txt.in:368 msgid "" "PURPOSE:\n" " This test will check that Evolution works.\n" "STEPS:\n" " 1. Click the \"Test\" button to launch Evolution.\n" " 2. Configure it to connect to a IMAP account.\n" "VERIFICATION:\n" " Were you able to receive and read e-mail correctly?" msgstr "" #. description #: ../jobs/user_apps.txt.in:381 msgid "" "PURPOSE:\n" " This test will check that Evolution works.\n" "STEPS:\n" " 1. Click the \"Test\" button to launch Evolution.\n" " 2. Configure it to connect to a SMTP account.\n" "VERIFICATION:\n" " Were you able to send e-mail without errors?" msgstr "" #. description #: ../jobs/user_apps.txt.in:394 msgid "" "PURPOSE:\n" " This test checks that gcalctool (Calculator) works.\n" "STEPS:\n" " Click the \"Test\" button to open the calculator.\n" "VERIFICATION:\n" " Did it launch correctly?" msgstr "" #. description #: ../jobs/user_apps.txt.in:407 msgid "" "PURPOSE:\n" " This test checks that gcalctool (Calculator) works.\n" "STEPS:\n" " Click the \"Test\" button to open the calculator and perform:\n" " 1. Simple math functions (+,-,/,*)\n" " 2. Nested math functions ((,))\n" " 3. Fractional math\n" " 4. Decimal math\n" "VERIFICATION:\n" " Did the functions perform as expected?" msgstr "" #. description #: ../jobs/user_apps.txt.in:424 msgid "" "PURPOSE:\n" " This test checks that gcalctool (Calculator) works.\n" "STEPS:\n" " Click the \"Test\" button to open the calculator and perform:\n" " 1. Memory set\n" " 2. Memory reset\n" " 3. Memory last clear\n" " 4. Memory clear\n" "VERIFICATION:\n" " Did the functions perform as expected?" msgstr "" #. description #: ../jobs/user_apps.txt.in:441 msgid "" "PURPOSE:\n" " This test checks that gcalctool (Calculator) works.\n" "STEPS:\n" " Click the \"Test\" button to open the calculator and perform:\n" " 1. Cut\n" " 2. Copy\n" " 3. Paste\n" "VERIFICATION:\n" " Did the functions perform as expected?" msgstr "" #. description #: ../jobs/user_apps.txt.in:456 msgid "" "PURPOSE:\n" " This test checks that gedit works.\n" "STEPS:\n" " 1. Click the \"Test\" button to open gedit.\n" " 2. Enter some text and save the file (make a note of the file name you " "use), then close gedit.\n" "VERIFICATION:\n" " Did this perform as expected?" msgstr "" #. description #: ../jobs/user_apps.txt.in:470 msgid "" "PURPOSE:\n" " This test checks that gedit works.\n" "STEPS:\n" " 1. Click the \"Test\" button to open gedit, and re-open the file you " "created previously.\n" " 2. Edit then save the file, then close gedit.\n" "VERIFICATION:\n" " Did this perform as expected?" msgstr "" #. description #: ../jobs/user_apps.txt.in:483 msgid "" "PURPOSE:\n" " This test will check that Gnome Terminal works.\n" "STEPS:\n" " 1. Click the \"Test\" button to open Terminal.\n" " 2. Type 'ls' and press enter. You should see a list of files and folder in " "your home directory.\n" " 3. Close the terminal window.\n" "VERIFICATION:\n" " Did this perform as expected?" msgstr "" #. description #: ../jobs/virtualization.txt.in:6 msgid "" "Test to check that virtualization is supported and the test system has at " "least a minimal amount of RAM to function as an OpenStack Compute Node" msgstr "" #. description #: ../jobs/virtualization.txt.in:13 msgid "" "Test to determine if this system is capable of running hardware accelerated " "KVM virtual machines" msgstr "" #. description #: ../jobs/virtualization.txt.in:10 msgid "Test to check that a cloud image boots and works properly with KVM" msgstr "" #. description #: ../jobs/virtualization.txt.in:18 msgid "Test to verify that the Xen Hypervisor is running." msgstr "" #. description #: ../jobs/virtualization.txt.in:26 msgid "Test to check that a Xen domU image can boot and run on Xen on Ubuntu" msgstr "" #. description #: ../jobs/wireless.txt.in:21 msgid "Wireless scanning test. It scans and reports on discovered APs." msgstr "" #. description #: ../jobs/wireless.txt.in:38 msgid "" "PURPOSE:\n" " This test will check your wireless connection.\n" "STEPS:\n" " 1. Click on the Network icon in the panel.\n" " 2. Select a network below the 'Wireless networks' section.\n" " 3. Click \"Test\" to verify that it's possible to establish an HTTP " "connection.\n" "VERIFICATION:\n" " Did a notification show and was the connection correctly established?" msgstr "" #. description #: ../jobs/wireless.txt.in:57 msgid "" "Tests that the systems wireless hardware can connect to a router using WPA " "security and the 802.11b/g protocols." msgstr "" #. description #: ../jobs/wireless.txt.in:70 msgid "" "Tests that the systems wireless hardware can connect to a router using no " "security and the 802.11b/g protocols." msgstr "" #. description #: ../jobs/wireless.txt.in:84 msgid "" "Tests that the systems wireless hardware can connect to a router using WPA " "security and the 802.11n protocol." msgstr "" #. description #: ../jobs/wireless.txt.in:98 msgid "" "Tests that the systems wireless hardware can connect to a router using no " "security and the 802.11n protocol." msgstr "" #. description #: ../jobs/wireless.txt.in:277 msgid "" "Tests the performance of a systems wireless connection through the iperf " "tool." msgstr "" #. description #: ../jobs/wireless.txt.in:289 msgid "" "Tests the performance of a systems wireless connection through the iperf " "tool, using UDP packets." msgstr "" #. description #: ../jobs/wireless.txt.in:301 msgid "" " Test that the system's wireless hardware can connect to a router using the\n" " 802.11a protocol. This requires that you have a router pre-configured to " "only\n" " respond to requests on the 802.11a protocol." msgstr "" #. description #: ../jobs/wireless.txt.in:314 msgid "" " Test that the system's wireless hardware can connect to a router using the\n" " 802.11b protocol. This requires that you have a router pre-configured to " "only\n" " respond to requests on the 802.11b protocol." msgstr "" #. description #: ../jobs/wireless.txt.in:344 msgid "" " Test that the system's wireless hardware can connect to a router using the\n" " 802.11g protocol. This requires that you have a router pre-configured to " "only\n" " respond to requests on the 802.11g protocol." msgstr "" #: ../checkbox/application.py:66 msgid "Usage: checkbox [OPTIONS]" msgstr "" #: ../checkbox/application.py:70 msgid "Print version information and exit." msgstr "" #: ../checkbox/application.py:74 msgid "The file to write the log to." msgstr "" #: ../checkbox/application.py:77 msgid "One of debug, info, warning, error or critical." msgstr "" #: ../checkbox/application.py:82 msgid "Configuration override parameters." msgstr "" #: ../checkbox/application.py:84 msgid "Shorthand for --config=.*/jobs_info/blacklist." msgstr "" #: ../checkbox/application.py:86 msgid "Shorthand for --config=.*/jobs_info/blacklist_file." msgstr "" #: ../checkbox/application.py:88 msgid "Shorthand for --config=.*/jobs_info/whitelist." msgstr "" #: ../checkbox/application.py:90 msgid "Shorthand for --config=.*/jobs_info/whitelist_file." msgstr "" #: ../checkbox/application.py:115 msgid "Missing configuration file as argument.\n" msgstr "" #: ../checkbox/job.py:85 msgid "Command not found." msgstr "" #: ../checkbox/job.py:93 #, python-format msgid "Command received signal %(signal_name)s: %(signal_description)s" msgstr "" #: ../checkbox/lib/signal.py:23 msgid "" "Hangup detected on controlling terminal or death of controlling process" msgstr "" #: ../checkbox/lib/signal.py:24 msgid "Interrupt from keyboard" msgstr "" #: ../checkbox/lib/signal.py:25 msgid "Quit from keyboard" msgstr "" #: ../checkbox/lib/signal.py:26 msgid "Illegal Instruction" msgstr "" #: ../checkbox/lib/signal.py:27 msgid "Abort signal from abort(3)" msgstr "" #: ../checkbox/lib/signal.py:28 msgid "Floating point exception" msgstr "" #: ../checkbox/lib/signal.py:29 msgid "Kill signal" msgstr "" #: ../checkbox/lib/signal.py:30 msgid "Invalid memory reference" msgstr "" #: ../checkbox/lib/signal.py:31 msgid "Broken pipe: write to pipe with no readers" msgstr "" #: ../checkbox/lib/signal.py:32 msgid "Timer signal from alarm(2)" msgstr "" #: ../checkbox/lib/signal.py:33 msgid "Termination signal" msgstr "" #: ../checkbox/lib/signal.py:34 msgid "User-defined signal 1" msgstr "" #: ../checkbox/lib/signal.py:35 msgid "User-defined signal 2" msgstr "" #: ../checkbox/lib/signal.py:36 msgid "Child stopped or terminated" msgstr "" #: ../checkbox/lib/signal.py:37 msgid "Continue if stopped" msgstr "" #: ../checkbox/lib/signal.py:38 msgid "Stop process" msgstr "" #: ../checkbox/lib/signal.py:39 msgid "Stop typed at tty" msgstr "" #: ../checkbox/lib/signal.py:40 msgid "tty input for background process" msgstr "" #: ../checkbox/lib/signal.py:41 msgid "tty output for background process" msgstr "" #: ../checkbox/lib/signal.py:77 msgid "UNKNOWN" msgstr "" #: ../checkbox/lib/signal.py:89 msgid "Unknown signal" msgstr "" #: ../checkbox_cli/cli_interface.py:31 msgid "yes" msgstr "" #: ../checkbox_cli/cli_interface.py:32 msgid "no" msgstr "" #: ../checkbox_cli/cli_interface.py:33 msgid "skip" msgstr "" #: ../checkbox_cli/cli_interface.py:127 msgid "Press any key to continue..." msgstr "" #: ../checkbox_cli/cli_interface.py:136 ../checkbox_cli/cli_interface.py:237 #, python-format msgid "Please choose (%s): " msgstr "" #: ../checkbox_cli/cli_interface.py:232 ../checkbox_cli/cli_interface.py:355 #: ../checkbox_cli/cli_interface.py:386 msgid "Space when finished" msgstr "" #: ../checkbox_cli/cli_interface.py:384 msgid "Combine with character above to expand node" msgstr "" #: ../checkbox_cli/cli_interface.py:432 msgid "test" msgstr "" #: ../checkbox_cli/cli_interface.py:456 msgid "test again" msgstr "" #: ../checkbox_cli/cli_interface.py:462 msgid "Please type here and press Ctrl-D when finished:\n" msgstr "" #: ../checkbox_urwid/urwid_interface.py:86 msgid "Checkbox System Testing" msgstr "" #: ../checkbox/user_interface.py:70 ../qt/frontend/ui_qtfront.h:644 msgid "Continue" msgstr "" #: ../checkbox_urwid/urwid_interface.py:220 #: ../checkbox_urwid/urwid_interface.py:296 #: ../checkbox_urwid/urwid_interface.py:447 #: ../checkbox_urwid/urwid_interface.py:569 msgid "Previous" msgstr "" #: ../checkbox_urwid/urwid_interface.py:221 #: ../checkbox_urwid/urwid_interface.py:297 #: ../checkbox_urwid/urwid_interface.py:448 #: ../checkbox_urwid/urwid_interface.py:570 msgid "Next" msgstr "" #. Show buttons #: ../checkbox_urwid/urwid_interface.py:445 msgid "Select All" msgstr "" #: ../checkbox_urwid/urwid_interface.py:446 msgid "Deselect All" msgstr "" #. Show buttons #: ../checkbox_urwid/urwid_interface.py:567 msgid "Expand All" msgstr "" #: ../checkbox_urwid/urwid_interface.py:568 msgid "Collapse All" msgstr "" #: ../checkbox_urwid/urwid_interface.py:1034 msgid "Test" msgstr "" #: ../checkbox_urwid/urwid_interface.py:1049 msgid "Test Again" msgstr "" #: ../checkbox_gtk/gtk_interface.py:525 msgid "_Test Again" msgstr "" #: ../qt/frontend/qtfront.cpp:556 msgid "Info" msgstr "" #: ../qt/frontend/qtfront.cpp:228 msgid "Error" msgstr "" #: ../checkbox_gtk/gtk_interface.py:607 msgid "Detailed information..." msgstr "" #: ../checkbox/user_interface.py:71 msgid "Rerun" msgstr "" #: ../checkbox/user_interface.py:72 msgid "Restart" msgstr "" #: ../plugins/backend_info.py:93 msgid "" "SYSTEM TESTING: Please enter your password. Some tests require root access " "to run properly. Your password will never be stored and will never be " "submitted with test results." msgstr "" #: ../plugins/backend_info.py:97 msgid "PASSWORD: " msgstr "" #: ../plugins/final_prompt.py:24 msgid "Successfully finished testing!" msgstr "" #: ../plugins/final_prompt.py:39 msgid "_Finish" msgstr "" #. Resolve dependencies #: ../plugins/gather_prompt.py:35 ../plugins/suites_prompt.py:98 msgid "Gathering information from your system..." msgstr "" #: ../plugins/intro_prompt.py:28 msgid "" "Welcome to System Testing!\n" "\n" "Checkbox provides tests to confirm that your system is working properly. " "Once you are finished running the tests, you can view a summary report for " "your system." msgstr "" #: ../plugins/intro_prompt.py:33 msgid "" "\n" "\n" "Warning: Some tests could cause your system to freeze or become " "unresponsive. Please save all your work and close all other running " "applications before beginning the testing process." msgstr "" #: ../plugins/jobs_info.py:151 #, python-format msgid "Failed to open file '%s': %s" msgstr "" #: ../plugins/jobs_info.py:248 msgid "Dependencies are missing so some jobs will not run." msgstr "" #: ../plugins/jobs_info.py:250 msgid "" "To fix this, close checkbox and add the missing dependencies to the " "whitelist." msgstr "" #: ../plugins/jobs_info.py:262 msgid "Whitelist not topologically ordered" msgstr "" #: ../plugins/jobs_info.py:263 msgid "Jobs will be reordered to fix broken dependencies" msgstr "" #: ../plugins/launchpad_exchange.py:135 #, python-format msgid "Failed to process form: %s" msgstr "" #: ../plugins/launchpad_exchange.py:150 #, python-format msgid "" "Failed to contact server. Please try\n" "again or upload the following file name:\n" "%s\n" "\n" "directly to the system database:\n" "https://launchpad.net/+hwdb/+submit" msgstr "" #: ../plugins/launchpad_exchange.py:159 msgid "" "Failed to upload to server,\n" "please try again later." msgstr "" #: ../plugins/launchpad_exchange.py:171 msgid "Information not posted to Launchpad." msgstr "" #. Ignore whether to submit to HEXR #: ../plugins/launchpad_prompt.py:78 #, python-format msgid "" "The following report has been generated for submission to the Launchpad " "hardware database:\n" "\n" " [[%s|View Report]]\n" "\n" "You can submit this information about your system by providing the email " "address you use to sign in to Launchpad. If you do not have a Launchpad " "account, please register here:\n" "\n" " https://launchpad.net/+login" msgstr "" #: ../plugins/launchpad_prompt.py:88 msgid "Email" msgstr "" #: ../plugins/launchpad_prompt.py:97 msgid "Email address must be in a proper format." msgstr "" #: ../plugins/launchpad_prompt.py:103 msgid "Exchanging information with the server..." msgstr "" #: ../plugins/launchpad_report.py:172 msgid "" "The generated report seems to have validation errors,\n" "so it might not be processed by Launchpad." msgstr "" #: ../plugins/lock_prompt.py:66 msgid "There is another checkbox running. Please close it first." msgstr "" #: ../plugins/message_info.py:88 #, python-format msgid "Executing %(test_name)s" msgstr "" #: ../plugins/recover_prompt.py:62 msgid "" "Checkbox did not finish completely.\n" "Do you want to rerun the last test,\n" "continue to the next test, or\n" "restart from the beginning?" msgstr "" #: ../plugins/report_prompt.py:39 msgid "Building report..." msgstr "" #: ../plugins/shell_test.py:52 #, python-format msgid "Running %s..." msgstr "" #: ../plugins/suites_prompt.py:139 ../qt/frontend/ui_qtfront.h:648 msgid "Choose tests to run on your system:" msgstr "" #: ../scripts/keyboard_test:22 msgid "Enter text:\n" msgstr "" #: ../scripts/keyboard_test:43 msgid "Type Text" msgstr "" #: ../scripts/key_test:66 msgid "Not required" msgstr "" #: ../scripts/key_test:68 msgid "Untested" msgstr "" #: ../scripts/key_test:69 msgid "Tested" msgstr "" #: ../scripts/key_test:164 msgid "Test cancelled" msgstr "" #: ../scripts/key_test:184 ../scripts/key_test:271 msgid "Please press each key on your keyboard." msgstr "" #: ../scripts/key_test:185 msgid "I will exit automatically once all keys have been pressed." msgstr "" #: ../scripts/key_test:187 msgid "" "If your keyboard lacks one or more keys, press its number to skip testing " "that key." msgstr "" #: ../scripts/key_test:189 msgid "You can also close me by pressing ESC or Ctrl+C." msgstr "" #: ../scripts/key_test:207 msgid "%(key_name)s key has been pressed" msgstr "" #: ../scripts/key_test:211 ../scripts/key_test:318 msgid "All required keys have been tested!" msgstr "" #: ../scripts/key_test:243 msgid "Key test" msgstr "" #: ../scripts/key_test:256 msgid "_Exit" msgstr "" #: ../scripts/key_test:268 msgid "Skip" msgstr "" #: ../scripts/key_test:272 msgid "" "If a key is not present in your keyboard, press the 'Skip' button below it " "to remove it from the test." msgstr "" #: ../scripts/key_test:403 msgid "Test interrupted" msgstr "" #: ../scripts/gateway_ping_test:254 msgid "No Internet connection" msgstr "" #: ../scripts/gateway_ping_test:257 #, c-format msgid "Connection established, but lost {}% of packets" msgstr "" #: ../scripts/gateway_ping_test:260 msgid "FAIL: {}% packet loss is higherthan {}% threshold" msgstr "" #: ../scripts/gateway_ping_test:265 msgid "PASS: {}% packet loss is within {}% threshold" msgstr "" #: ../scripts/gateway_ping_test:269 msgid "Internet connection fully established" msgstr "" #: ../checkbox_qt/qt_interface.py:287 ../qt/frontend/qtfront.cpp:252 msgid "Working" msgstr "" #: ../qt/frontend/qtfront.cpp:81 msgid "Audio Test" msgstr "" #: ../qt/frontend/qtfront.cpp:82 msgid "Bluetooth Test" msgstr "" #: ../qt/frontend/qtfront.cpp:83 msgid "Camera Test" msgstr "" #: ../qt/frontend/qtfront.cpp:84 msgid "CPU Test" msgstr "" #: ../qt/frontend/qtfront.cpp:85 msgid "Disk Test" msgstr "" #: ../qt/frontend/qtfront.cpp:87 msgid "Firewire Test" msgstr "" #: ../qt/frontend/qtfront.cpp:88 msgid "Graphics Test" msgstr "" #: ../qt/frontend/qtfront.cpp:89 msgid "Info Test" msgstr "" #: ../qt/frontend/qtfront.cpp:90 msgid "Input Test" msgstr "" #: ../qt/frontend/qtfront.cpp:91 msgid "Keys Test" msgstr "" #: ../qt/frontend/qtfront.cpp:92 msgid "Media Card Test" msgstr "" #: ../qt/frontend/qtfront.cpp:93 msgid "Memory Test" msgstr "" #: ../qt/frontend/qtfront.cpp:94 msgid "Miscellanea Test" msgstr "" #: ../qt/frontend/qtfront.cpp:95 msgid "Monitor Test" msgstr "" #: ../qt/frontend/qtfront.cpp:95 msgid "Networking Test" msgstr "" #: ../qt/frontend/qtfront.cpp:97 msgid "Wireless Test" msgstr "" #: ../qt/frontend/qtfront.cpp:98 msgid "Optical Test" msgstr "" #: ../qt/frontend/qtfront.cpp:99 msgid "ExpressCard Test" msgstr "" #: ../qt/frontend/qtfront.cpp:100 msgid "Power Management Test" msgstr "" #: ../qt/frontend/qtfront.cpp:101 msgid "Suspend Test" msgstr "" #: ../qt/frontend/qtfront.cpp:102 msgid "USB Test" msgstr "" #: ../qt/frontend/qtfront.cpp:104 msgid "Not Started" msgstr "" #: ../qt/frontend/qtfront.cpp:105 ../qt/frontend/qtfront.cpp:106 msgid "Done" msgstr "" #: ../qt/frontend/qtfront.cpp:107 msgid "Not Supported" msgstr "" #: ../qt/frontend/qtfront.cpp:108 msgid "Not Resolved" msgstr "" #: ../qt/frontend/qtfront.cpp:109 msgid "Not Tested" msgstr "" #: ../qt/frontend/qtfront.cpp:110 msgid "In Progress" msgstr "" #: ../qt/frontend/qtfront.cpp:162 msgid "Are you sure?" msgstr "" #: ../qt/frontend/qtfront.cpp:162 msgid "Do you really want to skip this test?" msgstr "" #: ../qt/frontend/qtfront.cpp:163 msgid "Don't ask me again" msgstr "" #: ../qt/frontend/ui_qtfront.h:641 msgid "Form" msgstr "" #: ../qt/frontend/ui_qtfront.h:642 msgid "" "System \n" "Testing" msgstr "" #: ../qt/frontend/ui_qtfront.h:645 ../qt/frontend/ui_qtfront.h:663 msgid "Tab 1" msgstr "" #: ../qt/frontend/ui_qtfront.h:646 msgid "10 tests completed out of 30 (30%)" msgstr "" #: ../qt/frontend/ui_qtfront.h:649 msgid "Components" msgstr "" #: ../qt/frontend/ui_qtfront.h:650 msgid "Status" msgstr "" #: ../qt/frontend/ui_qtfront.h:651 msgid "Select all" msgstr "" #: ../qt/frontend/ui_qtfront.h:652 msgid "Deselect all" msgstr "" #: ../qt/frontend/ui_qtfront.h:653 msgid "Start testing" msgstr "" #: ../qt/frontend/ui_qtfront.h:654 msgid " Selection " msgstr "" #: ../qt/frontend/ui_qtfront.h:655 ../qt/frontend/ui_qtfront.h:656 msgid "TextLabel" msgstr "" #: ../qt/frontend/ui_qtfront.h:657 msgid "Comments" msgstr "" #: ../qt/frontend/ui_qtfront.h:659 msgid "&Yes" msgstr "" #: ../qt/frontend/ui_qtfront.h:660 msgid "&No" msgstr "" #: ../qt/frontend/ui_qtfront.h:661 msgid "&Skip this test" msgstr "" #: ../qt/frontend/ui_qtfront.h:662 msgid "&Test" msgstr "" #: ../qt/frontend/ui_qtfront.h:664 ../qt/frontend/ui_qtfront.h:681 msgid "Tab 2" msgstr "" #: ../qt/frontend/ui_qtfront.h:665 msgid "Ne&xt" msgstr "" #: ../qt/frontend/ui_qtfront.h:666 msgid "&Previous" msgstr "" #: ../qt/frontend/ui_qtfront.h:667 msgid " Run " msgstr "" #: ../qt/frontend/ui_qtfront.h:668 msgid "" "\n" "\n" "

Please " "enter the e-mail address associated with your Launchpad account (if " "applicable)

\n" "

and click " "the Submit Results button to submit these test results to " "Launchpad.

" msgstr "" #: ../qt/frontend/ui_qtfront.h:674 msgid "Submission details" msgstr "" #: ../qt/frontend/ui_qtfront.h:676 msgid "Email:" msgstr "" #: ../qt/frontend/ui_qtfront.h:677 msgid "Submit results" msgstr "" #: ../qt/frontend/ui_qtfront.h:678 msgid "View results" msgstr "" #: ../qt/frontend/ui_qtfront.h:679 msgid "Submit to HEXR" msgstr "" #: ../qt/frontend/ui_qtfront.h:680 msgid " Results " msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/example-content.po0000644000000000000000000000154312734303740021070 0ustar # Low German translation for example-content # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the example-content package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: example-content\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2012-01-30 12:22+0000\n" "PO-Revision-Date: 2011-08-21 18:02+0000\n" "Last-Translator: Jens Dodenhoff \n" "Language-Team: Low German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 17:55+0000\n" "X-Generator: Launchpad (build 18115)\n" #: ../data/examples.desktop.in.h:1 msgid "Examples" msgstr "Bispelen" #: ../data/examples.desktop.in.h:2 msgid "Example content for Ubuntu" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/aspell.po0000644000000000000000000007057712734303740017262 0ustar # Low German translation for aspell # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the aspell package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: aspell\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2011-07-07 13:15-0600\n" "PO-Revision-Date: 2010-06-14 20:08+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Low German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 15:59+0000\n" "X-Generator: Launchpad (build 18115)\n" #: common/info.cpp:232 msgid "a number between 0 and 1" msgstr "eene Taal twüschen 0 un 1" #: common/info.cpp:569 msgid "in the form \" \"" msgstr "" #: common/config.cpp:74 msgid "string" msgstr "Reeg" #: common/config.cpp:74 msgid "integer" msgstr "" #: common/config.cpp:74 msgid "boolean" msgstr "" #: common/config.cpp:74 msgid "list" msgstr "List" #. TRANSLATORS: "true" and "false" are literal #. * values and should not be translated. #: common/config.cpp:978 msgid "either \"true\" or \"false\"" msgstr "" #: common/config.cpp:997 msgid "a positive integer" msgstr "" #: common/config.cpp:1125 msgid "# default: " msgstr "" #: common/config.cpp:1188 #, c-format msgid "" "\n" "#######################################################################\n" "#\n" "# Filter: %s\n" "# %s\n" "#\n" "# configured as follows:\n" "\n" msgstr "" #: common/config.cpp:1286 msgid "ASPELL_CONF env var" msgstr "" #. TRANSLATORS: The remaing strings in config.cpp should be kept #. under 50 characters, begin with a lower case character and not #. include any trailing punctuation marks. #: common/config.cpp:1360 msgid "main configuration file" msgstr "" #: common/config.cpp:1362 msgid "location of main configuration file" msgstr "" #: common/config.cpp:1365 msgid "location of language data files" msgstr "" #: common/config.cpp:1367 msgid "create dictionary aliases" msgstr "" #: common/config.cpp:1369 msgid "location of the main word list" msgstr "" #: common/config.cpp:1371 msgid "encoding to expect data to be in" msgstr "" #: common/config.cpp:1373 msgid "add or removes a filter" msgstr "" #: common/config.cpp:1375 msgid "path(s) aspell looks for filters" msgstr "" #: common/config.cpp:1379 msgid "filter mode" msgstr "" #: common/config.cpp:1381 msgid "extra dictionaries to use" msgstr "" #: common/config.cpp:1383 msgid "location for personal files" msgstr "" #: common/config.cpp:1385 msgid "ignore words <= n chars" msgstr "" #. TRANSLATORS: It is OK if this is longer than 50 chars #: common/config.cpp:1388 msgid "ignore accents when checking words -- CURRENTLY IGNORED" msgstr "" #: common/config.cpp:1390 msgid "ignore case when checking words" msgstr "" #: common/config.cpp:1392 msgid "ignore commands to store replacement pairs" msgstr "" #: common/config.cpp:1394 common/config.cpp:1461 msgid "extra information for the word list" msgstr "" #: common/config.cpp:1396 msgid "keyboard definition to use for typo analysis" msgstr "" #: common/config.cpp:1398 msgid "language code" msgstr "" #: common/config.cpp:1400 msgid "deprecated, use lang instead" msgstr "" #: common/config.cpp:1402 msgid "location of local language data files" msgstr "" #: common/config.cpp:1404 msgid "base name of the main dictionary to use" msgstr "" #: common/config.cpp:1408 msgid "set module name" msgstr "" #: common/config.cpp:1410 msgid "search order for modules" msgstr "" #: common/config.cpp:1412 msgid "enable Unicode normalization" msgstr "" #: common/config.cpp:1414 msgid "Unicode normalization required for current lang" msgstr "" #. TRANSLATORS: the values after the ':' are literal #. values and should not be translated. #: common/config.cpp:1418 msgid "Unicode normalization form: none, nfd, nfc, comp" msgstr "" #: common/config.cpp:1420 msgid "avoid lossy conversions when normalization" msgstr "" #: common/config.cpp:1422 msgid "personal configuration file" msgstr "" #: common/config.cpp:1425 msgid "personal dictionary file name" msgstr "" #: common/config.cpp:1428 msgid "prefix directory" msgstr "" #: common/config.cpp:1430 msgid "replacements list file name" msgstr "" #: common/config.cpp:1433 msgid "consider run-together words legal" msgstr "" #: common/config.cpp:1435 msgid "maximum number that can be strung together" msgstr "" #: common/config.cpp:1437 msgid "minimal length of interior words" msgstr "" #: common/config.cpp:1439 msgid "save replacement pairs on save all" msgstr "" #: common/config.cpp:1441 msgid "set the prefix based on executable location" msgstr "" #: common/config.cpp:1443 msgid "size of the word list" msgstr "" #: common/config.cpp:1445 msgid "no longer used" msgstr "" #: common/config.cpp:1447 msgid "suggestion mode" msgstr "" #. TRANSLATORS: "sug-mode" is a literal value and should not be #. translated. #: common/config.cpp:1451 msgid "edit distance to use, override sug-mode default" msgstr "" #: common/config.cpp:1453 msgid "use typo analysis, override sug-mode default" msgstr "" #: common/config.cpp:1455 msgid "use replacement tables, override sug-mode default" msgstr "" #: common/config.cpp:1457 msgid "characters to insert when a word is split" msgstr "" #: common/config.cpp:1459 msgid "use personal, replacement & session dictionaries" msgstr "" #: common/config.cpp:1463 msgid "search path for word list information files" msgstr "" #: common/config.cpp:1465 msgid "enable warnings" msgstr "" #. TRANSLATORS: It is OK if this is longer than 50 chars #: common/config.cpp:1475 msgid "indicator for affix flags in word lists -- CURRENTLY IGNORED" msgstr "" #: common/config.cpp:1477 msgid "use affix compression when creating dictionaries" msgstr "" #: common/config.cpp:1479 msgid "remove invalid affix flags" msgstr "" #: common/config.cpp:1481 msgid "attempts to clean words so that they are valid" msgstr "" #: common/config.cpp:1483 msgid "compute soundslike on demand rather than storing" msgstr "" #: common/config.cpp:1485 msgid "partially expand affixes for better suggestions" msgstr "" #: common/config.cpp:1487 msgid "skip invalid words" msgstr "" #: common/config.cpp:1489 msgid "check if affix flags are valid" msgstr "" #: common/config.cpp:1491 msgid "check if words are valid" msgstr "" #: common/config.cpp:1498 msgid "create a backup file by appending \".bak\"" msgstr "" #: common/config.cpp:1500 msgid "use byte offsets instead of character offsets" msgstr "" #: common/config.cpp:1502 msgid "create missing root/affix combinations" msgstr "" #: common/config.cpp:1504 msgid "keymapping for check mode: \"aspell\" or \"ispell\"" msgstr "" #: common/config.cpp:1506 msgid "reverse the order of the suggest list" msgstr "" #: common/config.cpp:1508 msgid "suggest possible replacements" msgstr "" #: common/config.cpp:1510 msgid "time load time and suggest time in pipe mode" msgstr "" #: common/convert.cpp:303 common/convert.cpp:497 #, c-format msgid "" "This could also mean that the file \"%s\" could not be opened for reading or " "does not exist." msgstr "" #: common/convert.cpp:582 common/convert.cpp:689 common/convert.cpp:735 #, c-format msgid "The Unicode code point U+%04X is unsupported." msgstr "" #: common/convert.cpp:859 #, c-format msgid "Invalid UTF-8 sequence at position %ld." msgstr "" #: common/errors.cpp:27 msgid "Operation Not Supported: %what:1" msgstr "" #: common/errors.cpp:43 msgid "The method \"%what:1\" is unimplemented in \"%where:2\"." msgstr "" #: common/errors.cpp:51 #, c-format msgid "%file:1:" msgstr "" #: common/errors.cpp:59 #, c-format msgid "The file \"%file:1\" can not be opened" msgstr "" #: common/errors.cpp:67 #, c-format msgid "The file \"%file:1\" can not be opened for reading." msgstr "" #: common/errors.cpp:75 #, c-format msgid "The file \"%file:1\" can not be opened for writing." msgstr "" #: common/errors.cpp:83 #, c-format msgid "The file name \"%file:1\" is invalid." msgstr "" #: common/errors.cpp:91 #, c-format msgid "The file \"%file:1\" is not in the proper format." msgstr "" #: common/errors.cpp:107 #, c-format msgid "The directory \"%dir:1\" can not be opened for reading." msgstr "" #: common/errors.cpp:123 msgid "The key \"%key:1\" is unknown." msgstr "" #: common/errors.cpp:131 msgid "The value for option \"%key:1\" can not be changed." msgstr "" #: common/errors.cpp:139 msgid "The key \"%key:1\" is not %accepted:2 and is thus invalid." msgstr "" #: common/errors.cpp:147 msgid "" "The value \"%value:2\" is not %accepted:3 and is thus invalid for the key " "\"%key:1\"." msgstr "" #: common/errors.cpp:163 msgid "The key \"%key:1\" is not a string." msgstr "" #: common/errors.cpp:171 msgid "The key \"%key:1\" is not an integer." msgstr "" #: common/errors.cpp:179 msgid "The key \"%key:1\" is not a boolean." msgstr "" #: common/errors.cpp:187 msgid "The key \"%key:1\" is not a list." msgstr "" #: common/errors.cpp:195 msgid "" "The key \"%key:1\" does not take any parameters when prefixed by a \"reset-" "\"." msgstr "" #: common/errors.cpp:203 msgid "" "The key \"%key:1\" does not take any parameters when prefixed by an \"enable-" "\"." msgstr "" #: common/errors.cpp:211 msgid "" "The key \"%key:1\" does not take any parameters when prefixed by a \"dont-\" " "or \"disable-\"." msgstr "" #: common/errors.cpp:219 msgid "" "The key \"%key:1\" does not take any parameters when prefixed by a \"clear-" "\"." msgstr "" #: common/errors.cpp:235 #, c-format msgid "The language \"%lang:1\" is not known." msgstr "" #: common/errors.cpp:243 #, c-format msgid "The soundslike \"%sl:2\" is not known." msgstr "" #: common/errors.cpp:251 #, c-format msgid "The language \"%lang:1\" is not supported." msgstr "" #: common/errors.cpp:259 #, c-format msgid "No word lists can be found for the language \"%lang:1\"." msgstr "" #: common/errors.cpp:267 #, c-format msgid "Expected language \"%lang:1\" but got \"%prev:2\"." msgstr "" #: common/errors.cpp:283 #, c-format msgid "Affix '%aff:1' is corrupt." msgstr "" #: common/errors.cpp:291 #, c-format msgid "The condition \"%cond:1\" is invalid." msgstr "" #: common/errors.cpp:299 #, c-format msgid "" "The condition \"%cond:1\" does not guarantee that \"%strip:2\" can always be " "stripped." msgstr "" #: common/errors.cpp:307 #, c-format msgid "" "The file \"%file:1\" is not in the proper format. Expected the file to be in " "\"%exp:2\" not \"%got:3\"." msgstr "" #: common/errors.cpp:323 #, c-format msgid "The encoding \"%encod:1\" is not known." msgstr "" #: common/errors.cpp:331 #, c-format msgid "The encoding \"%encod:1\" is not supported." msgstr "" #: common/errors.cpp:339 #, c-format msgid "The conversion from \"%encod:1\" to \"%encod2:2\" is not supported." msgstr "" #: common/errors.cpp:379 #, c-format msgid "The string \"%str:1\" is invalid." msgstr "" #: common/errors.cpp:387 msgid "The word \"%word:1\" is invalid." msgstr "" #: common/errors.cpp:395 msgid "The affix flag '%aff:1' is invalid for word \"%word:2\"." msgstr "" #: common/errors.cpp:403 msgid "The affix flag '%aff:1' can not be applied to word \"%word:2\"." msgstr "" #: common/errors.cpp:451 msgid "not a version number" msgstr "" #: common/errors.cpp:467 msgid "dlopen returned \"%return:1\"." msgstr "" #: common/errors.cpp:475 #, c-format msgid "The file \"%filter:1\" does not contain any filters." msgstr "" #: common/errors.cpp:483 #, c-format msgid "The filter \"%filter:1\" does not exist." msgstr "" #: common/errors.cpp:491 common/errors.cpp:587 msgid "Confused by version control." msgstr "" #: common/errors.cpp:499 msgid "Aspell version does not match filter's requirement." msgstr "" #: common/errors.cpp:507 msgid "Filter option already exists." msgstr "" #: common/errors.cpp:515 msgid "Use option modifiers only within named option." msgstr "" #: common/errors.cpp:523 msgid "Option modifier unknown." msgstr "" #: common/errors.cpp:531 msgid "Error setting filter description." msgstr "" #: common/errors.cpp:547 msgid "Empty option specifier." msgstr "" #: common/errors.cpp:555 #, c-format msgid "Option \"%option:1\" possibly specified prior to filter." msgstr "" #: common/errors.cpp:563 msgid "Unknown mode description key \"%key:1\"." msgstr "" #: common/errors.cpp:571 #, c-format msgid "Expecting \"%modekey:1\" key." msgstr "" #: common/errors.cpp:579 msgid "Version specifier missing key: \"aspell\"." msgstr "" #: common/errors.cpp:595 msgid "Aspell version does not match mode's requirement." msgstr "" #: common/errors.cpp:603 msgid "Missing magic mode expression." msgstr "" #: common/errors.cpp:611 #, c-format msgid "Empty extension at char %char:1." msgstr "" #: common/errors.cpp:619 #, c-format msgid "\"%mode:1\" error" msgstr "" #: common/errors.cpp:627 #, c-format msgid "Unknown mode: \"%mode:1\"." msgstr "" #: common/errors.cpp:635 #, c-format msgid "\"%mode:1\" error while extend Aspell modes. (out of memory?)" msgstr "" #: common/errors.cpp:651 #, c-format msgid "\"%mode:1\": no start for magic search given for magic \"%magic:2\"." msgstr "" #: common/errors.cpp:659 #, c-format msgid "\"%mode:1\": no range for magic search given for magic \"%magic:2\"." msgstr "" #: common/errors.cpp:667 #, c-format msgid "\"%mode:1\": no magic expression available for magic \"%magic:2\"." msgstr "" #: common/errors.cpp:675 msgid "" "\"%mode:1\": Magic \"%magic:2\": bad regular expression after location " "specifier; regexp reports: \"%regerr:3\"." msgstr "" #: common/errors.cpp:691 #, c-format msgid "\"%expression:1\" is not a valid regular expression." msgstr "" #: common/posib_err.cpp:100 msgid "Unhandled Error: " msgstr "" #: prog/aspell.cpp:97 #, c-format msgid "Error: %s\n" msgstr "" #: prog/aspell.cpp:102 msgid "Error: " msgstr "" #: prog/aspell.cpp:203 msgid "enter Email mode." msgstr "" #: prog/aspell.cpp:204 msgid "enter HTML mode." msgstr "" #: prog/aspell.cpp:205 msgid "enter TeX mode." msgstr "" #: prog/aspell.cpp:206 msgid "enter Nroff mode." msgstr "" #: prog/aspell.cpp:312 #, c-format msgid "Invalid Option: %s" msgstr "" #: prog/aspell.cpp:319 msgid " does not take any parameters." msgstr "" #: prog/aspell.cpp:332 prog/aspell.cpp:392 #, c-format msgid "You must specify a parameter for \"%s\"." msgstr "" #: prog/aspell.cpp:381 msgid "You must specify an action" msgstr "" #: prog/aspell.cpp:389 prog/aspell.cpp:452 prog/aspell.cpp:474 #, c-format msgid "Unknown Action: %s" msgstr "" #: prog/aspell.cpp:395 #, c-format msgid "Error: You must specify at least %d parameters for \"%s\".\n" msgstr "" #: prog/aspell.cpp:637 msgid "Invalid Input" msgstr "" #: prog/aspell.cpp:710 #, c-format msgid "WARNING: Unable to enter Nroff mode: %s\n" msgstr "" #: prog/aspell.cpp:731 msgid "Time to load word list: " msgstr "" #: prog/aspell.cpp:929 #, c-format msgid "Suggestion Time: %f\n" msgstr "" #: prog/aspell.cpp:972 msgid "You must specify a file name." msgstr "" #: prog/aspell.cpp:975 msgid "Only one file name may be specified." msgstr "" #: prog/aspell.cpp:985 #, c-format msgid "Could not open the file \"%s\" for reading" msgstr "" #: prog/aspell.cpp:998 #, c-format msgid "Invalid keymapping: %s" msgstr "" #: prog/aspell.cpp:1020 #, c-format msgid "Could not open the file \"%s\" for writing. File not saved." msgstr "" #: prog/aspell.cpp:1033 msgid "Ignore" msgstr "" #: prog/aspell.cpp:1034 msgid "Ignore all" msgstr "" #: prog/aspell.cpp:1035 msgid "Replace" msgstr "" #: prog/aspell.cpp:1036 msgid "Replace all" msgstr "" #: prog/aspell.cpp:1037 msgid "Add" msgstr "" #: prog/aspell.cpp:1038 msgid "Add Lower" msgstr "" #: prog/aspell.cpp:1039 msgid "Abort" msgstr "" #: prog/aspell.cpp:1040 msgid "Exit" msgstr "" #: prog/aspell.cpp:1116 msgid "Are you sure you want to abort (y/n)? " msgstr "" #. TRANSLATORS: The user may input any of these characters to say "yes". #. MUST ONLY CONSIST OF ASCII CHARACTERS. #: prog/aspell.cpp:1120 msgid "Yy" msgstr "" #: prog/aspell.cpp:1148 msgid "With: " msgstr "" #: prog/aspell.cpp:1165 msgid "Sorry that is an invalid choice!" msgstr "" #: prog/aspell.cpp:1386 msgid "Sorry \"filter\" is currently unimplemented.\n" msgstr "" #: prog/aspell.cpp:1520 msgid "Can't merge a master word list yet. Sorry." msgstr "" #: prog/aspell.cpp:1544 msgid "Sorry \"create/merge personal\" is currently unimplemented.\n" msgstr "" #: prog/aspell.cpp:1553 prog/aspell.cpp:1609 #, c-format msgid "Sorry I won't overwrite \"%s\"" msgstr "" #: prog/aspell.cpp:1600 msgid "Sorry \"create/merge repl\" is currently unimplemented.\n" msgstr "" #: prog/aspell.cpp:1872 #, c-format msgid "\"%s\" is not a valid flag for the \"munch-list\" command." msgstr "" #. TRANSLATORS: These should all be formated to fit in 80 column or #. less #: prog/aspell.cpp:2799 msgid "Usage: aspell [options] " msgstr "" #: prog/aspell.cpp:2800 msgid " is one of:" msgstr "" #: prog/aspell.cpp:2801 msgid " -?|usage display a brief usage message" msgstr "" #: prog/aspell.cpp:2802 msgid " help display a detailed help message" msgstr "" #: prog/aspell.cpp:2803 msgid " -c|check to check a file" msgstr "" #: prog/aspell.cpp:2804 msgid " -a|pipe \"ispell -a\" compatibility mode" msgstr "" #: prog/aspell.cpp:2805 msgid " [dump] config dumps the current configuration to stdout" msgstr "" #: prog/aspell.cpp:2806 msgid " config prints the current value of an option" msgstr "" #: prog/aspell.cpp:2807 msgid " [dump] dicts | filters | modes" msgstr "" #: prog/aspell.cpp:2808 msgid " lists available dictionaries / filters / filter modes" msgstr "" #: prog/aspell.cpp:2809 msgid "[options] is any of the following:" msgstr "" #: prog/aspell.cpp:2822 msgid "" " list produce a list of misspelled words from standard input" msgstr "" #: prog/aspell.cpp:2825 msgid "" " soundslike returns the sounds like equivalent for each word entered" msgstr "" #: prog/aspell.cpp:2826 msgid " munch generate possible root words and affixes" msgstr "" #: prog/aspell.cpp:2827 msgid " expand [1-4] expands affix flags" msgstr "" #: prog/aspell.cpp:2828 msgid "" " clean [strict] cleans a word list so that every line is a valid word" msgstr "" #: prog/aspell.cpp:2830 msgid " -v|version prints a version line" msgstr "" #: prog/aspell.cpp:2831 msgid " munch-list [simple] [single|multi] [keep]" msgstr "" #: prog/aspell.cpp:2832 msgid " reduce the size of a word list via affix compression" msgstr "" #: prog/aspell.cpp:2833 msgid " conv []" msgstr "" #: prog/aspell.cpp:2834 msgid " converts from one encoding to another" msgstr "" #: prog/aspell.cpp:2835 msgid " norm ( | ) []" msgstr "" #: prog/aspell.cpp:2836 msgid " perform Unicode normalization" msgstr "" #: prog/aspell.cpp:2839 msgid " dump|create|merge master|personal|repl []" msgstr "" #: prog/aspell.cpp:2840 msgid "" " dumps, creates or merges a master, personal, or replacement dictionary." msgstr "" #. TRANSLATORS: "none", "internal" and "strict" are literal values #. and should not be translated. #: prog/aspell.cpp:2844 msgid "" " normalization form to use, either none, internal, or " "strict" msgstr "" #: prog/aspell.cpp:2854 #, c-format msgid "" "\n" "Aspell %s. Copyright 2000-2011 by Kevin Atkinson.\n" "\n" msgstr "" #: prog/aspell.cpp:2888 msgid "" "Available Dictionaries:\n" " Dictionaries can be selected directly via the \"-d\" or \"master\"\n" " option. They can also be selected indirectly via the \"lang\",\n" " \"variety\", and \"size\" options.\n" msgstr "" #: prog/aspell.cpp:2909 msgid "" "Available Filters (and associated options):\n" " Filters can be added or removed via the \"filter\" option.\n" msgstr "" #: prog/aspell.cpp:2916 #, c-format msgid "" "\n" " %s filter: %s\n" msgstr "" #. TRANSLATORS: This should be formated to fit in 80 column or less #: prog/aspell.cpp:2933 msgid "" "Available Filter Modes:\n" " Filter Modes are reconfigured combinations of filters optimized for\n" " files of a specific type. A mode is selected via the \"mode\" option.\n" " This will happen implicitly if Aspell is able to identify the file\n" " type from the extension, and possibility the contents, of the file.\n" msgstr "" #: prog/check_funs.cpp:287 msgid "Error: Stdin not a terminal." msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:774 msgid "Enter" msgstr "" #: prog/check_funs.cpp:776 msgid "Accept Changes" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:779 msgid "Backspace" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:781 msgid "Control-H" msgstr "" #: prog/check_funs.cpp:782 msgid "Delete the previous character" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:785 msgid "Left" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:787 msgid "Control-B" msgstr "" #: prog/check_funs.cpp:788 msgid "Move Back one space" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:791 msgid "Right" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:793 msgid "Control-F" msgstr "" #: prog/check_funs.cpp:794 msgid "Move Forward one space" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:797 msgid "Home" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:799 msgid "Control-A" msgstr "" #: prog/check_funs.cpp:800 msgid "Move to the beginning of the line" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:803 msgid "End" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:805 msgid "Control-E" msgstr "" #: prog/check_funs.cpp:806 msgid "Move to the end of the line" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:809 msgid "Delete" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:811 msgid "Control-D" msgstr "" #: prog/check_funs.cpp:812 msgid "Delete the next character" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:816 msgid "Control-K" msgstr "" #: prog/check_funs.cpp:817 msgid "Kill all characters to the EOL" msgstr "" #. TRANSLATORS: This is a literal Key. #: prog/check_funs.cpp:821 msgid "Control-C" msgstr "" #: prog/check_funs.cpp:822 msgid "Abort This Operation" msgstr "" #: modules/speller/default/language.cpp:103 msgid "This is probably because: " msgstr "" #: modules/speller/default/language.cpp:110 msgid "The required field \"name\" is missing." msgstr "" #: modules/speller/default/language.cpp:488 msgid "Empty string." msgstr "" #: modules/speller/default/language.cpp:492 #, c-format msgid "" "The character '%s' (U+%02X) may not appear at the beginning of a word." msgstr "" #: modules/speller/default/language.cpp:494 #: modules/speller/default/language.cpp:503 #, c-format msgid "" "The character '%s' (U+%02X) must be followed by an alphabetic character." msgstr "" #: modules/speller/default/language.cpp:496 msgid "Does not contain any alphabetic characters." msgstr "" #: modules/speller/default/language.cpp:501 #, c-format msgid "The character '%s' (U+%02X) may not appear in the middle of a word." msgstr "" #: modules/speller/default/language.cpp:508 msgid "" "The character '\\r' (U+0D) may not appear at the end of a word. This " "probably means means that the file is using MS-DOS EOL instead of Unix EOL." msgstr "" #: modules/speller/default/language.cpp:511 #, c-format msgid "The character '%s' (U+%02X) may not appear at the end of a word." msgstr "" #: modules/speller/default/language.cpp:543 #, c-format msgid "Warning: Removing invalid affix '%s' from word %s.\n" msgstr "" #: modules/speller/default/language.cpp:544 #, c-format msgid "Warning: Removing inapplicable affix '%s' from word %s.\n" msgstr "" #: modules/speller/default/language.cpp:675 #, c-format msgid "Warning: %s Skipping string.\n" msgstr "" #: modules/speller/default/language.cpp:733 msgid "The total length is larger than 240 characters." msgstr "" #: modules/speller/default/language.cpp:737 #, c-format msgid "Warning: %s Skipping word.\n" msgstr "" #: modules/speller/default/affix.cpp:426 msgid "Possibly incorrect count." msgstr "" #: modules/speller/default/readonly_ws.cpp:362 msgid "Incompatible hash function." msgstr "" #: modules/speller/default/readonly_ws.cpp:440 msgid "Wrong endian order." msgstr "" #: modules/speller/default/readonly_ws.cpp:463 msgid "Wrong soundslike." msgstr "" #: modules/speller/default/readonly_ws.cpp:469 msgid "Wrong soundslike version." msgstr "" #: modules/speller/default/readonly_ws.cpp:934 msgid "Affix flags found in word but no affix file given." msgstr "" #: modules/speller/default/readonly_ws.cpp:972 msgid "" "The total word length, with soundslike data, is larger than 240 characters." msgstr "" #: modules/speller/default/multi_ws.cpp:58 msgid "There must be at least one \"add\" line." msgstr "" #: modules/speller/default/suggest.cpp:1403 msgid "one of ultra, fast, normal, slow, or bad-spellers" msgstr "" #: modules/speller/default/data.cpp:404 msgid "is not one of the allowed types" msgstr "" #: modules/speller/default/speller_impl.cpp:241 msgid "The personal word list is unavailable." msgstr "" #: modules/speller/default/speller_impl.cpp:248 msgid "The session word list is unavailable." msgstr "" #: modules/speller/default/speller_impl.cpp:255 msgid "The main word list is unavailable." msgstr "" #: modules/filter/tex.cpp:255 modules/filter/tex.cpp:262 msgid "a string of 'o','O','p',or 'P'" msgstr "" #. TRANSLATORS: Like the strings in config.cpp, all strings in *-filter.opt #. should be under 50 characters, begin with a lower case character and #. not include any trailing punctuation marks. #: modules/filter/context-filter.info:7 msgid "experimental filter for hiding delimited contexts" msgstr "" #: modules/filter/context-filter.info:13 msgid "context delimiters (separated by spaces)" msgstr "" #: modules/filter/context-filter.info:21 msgid "swaps visible and invisible text" msgstr "" #: modules/filter/email-filter.info:7 msgid "filter for skipping quoted text in email messages" msgstr "" #: modules/filter/email-filter.info:13 msgid "email quote characters" msgstr "" #: modules/filter/email-filter.info:21 msgid "num chars that can appear before the quote char" msgstr "" #: modules/filter/html-filter.info:9 msgid "filter for dealing with HTML documents" msgstr "" #: modules/filter/html-filter.info:15 msgid "HTML attributes to always check" msgstr "" #: modules/filter/html-filter.info:21 msgid "HTML tags to always skip the contents of" msgstr "" #: modules/filter/nroff-filter.info:7 msgid "filter for dealing with Nroff documents" msgstr "" #: modules/filter/sgml-filter.info:9 msgid "filter for dealing with generic SGML/XML documents" msgstr "" #: modules/filter/sgml-filter.info:15 msgid "SGML attributes to always check" msgstr "" #: modules/filter/sgml-filter.info:20 msgid "SGML tags to always skip the contents of" msgstr "" #: modules/filter/tex-filter.info:7 msgid "filter for dealing with TeX/LaTeX documents" msgstr "" #: modules/filter/tex-filter.info:15 msgid "check TeX comments" msgstr "" #: modules/filter/tex-filter.info:21 msgid "TeX commands" msgstr "" #: modules/filter/texinfo-filter.info:7 msgid "filter for dealing with Texinfo documents" msgstr "" #: modules/filter/texinfo-filter.info:13 msgid "Texinfo commands to ignore the parameters of" msgstr "" #: modules/filter/texinfo-filter.info:41 msgid "Texinfo environments to ignore" msgstr "" #: modules/filter/url-filter.info:7 msgid "filter to skip URL like constructs" msgstr "" #: modules/filter/modes/ccpp.amf:8 msgid "mode for checking C++ comments and string literals" msgstr "" #: modules/filter/modes/comment.amf:5 msgid "mode to check any lines starting with a #" msgstr "" #: modules/filter/modes/email.amf:5 msgid "mode for skipping quoted text in email messages" msgstr "" #: modules/filter/modes/html.amf:10 msgid "mode for checking HTML documents" msgstr "" #: modules/filter/modes/none.amf:5 msgid "mode to disable all filters" msgstr "" #: modules/filter/modes/nroff.amf:7 msgid "mode for checking Nroff documents" msgstr "" #: modules/filter/modes/perl.amf:8 msgid "mode for checking Perl comments and string literals" msgstr "" #: modules/filter/modes/sgml.amf:8 msgid "mode for checking generic SGML/XML documents" msgstr "" #: modules/filter/modes/tex.amf:7 msgid "mode for checking TeX/LaTeX documents" msgstr "" #: modules/filter/modes/texinfo.amf:7 msgid "mode for checking Texinfo documents" msgstr "" #: modules/filter/modes/url.amf:5 msgid "mode to skip URL like constructs (default mode)" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/aptitude.po0000644000000000000000000050070312734303740017606 0ustar # Low German translation for aptitude # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the aptitude package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: aptitude\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2015-10-16 00:29+0100\n" "PO-Revision-Date: 2010-06-14 20:07+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Low German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2016-06-27 15:58+0000\n" "X-Generator: Launchpad (build 18115)\n" #. TRANSLATORS: These strings describing config items #. should be the same width. #: src/apt_config_treeitems.cc:99 src/apt_config_treeitems.cc:210 #: src/apt_config_treeitems.cc:396 msgid "%BOption:%b " msgstr "" #. TRANSLATORS: These strings describing config items #. should be the same width. #: src/apt_config_treeitems.cc:101 src/apt_config_treeitems.cc:212 #: src/apt_config_treeitems.cc:400 msgid "%BDefault:%b " msgstr "" #: src/apt_config_treeitems.cc:102 src/apt_config_treeitems.cc:104 msgid "True" msgstr "Wahr" #: src/apt_config_treeitems.cc:102 src/apt_config_treeitems.cc:104 msgid "False" msgstr "Falsch" #. TRANSLATORS: These strings describing config items #. should be the same width. #: src/apt_config_treeitems.cc:103 src/apt_config_treeitems.cc:214 #: src/apt_config_treeitems.cc:404 msgid "%BValue:%b " msgstr "" #: src/apt_config_treeitems.cc:280 #, c-format msgid "Editing \"%ls\": " msgstr "" #. TRANSLATORS: These strings describing config items #. should be the same width. #: src/apt_config_treeitems.cc:410 msgid "%BChoice:%b " msgstr "" #: src/apt_options.cc:160 msgid "Display some available commands at the top of the screen" msgstr "" #: src/apt_options.cc:161 msgid "" "If this option is enabled, a brief summary of some of the most important " "aptitude commands will appear beneath the menu bar." msgstr "" #: src/apt_options.cc:165 msgid "Hide the menu bar when it is not being used" msgstr "" #: src/apt_options.cc:166 msgid "" "If this option is enabled, the menu bar will only appear when it has been " "activated by pressing the menu key." msgstr "" #: src/apt_options.cc:170 msgid "Use a minibuffer-style prompt when possible" msgstr "" #: src/apt_options.cc:171 msgid "" "If this option is enabled, prompts will be displayed in a single line at the " "bottom of the screen. If not, prompts will be displayed as pop-up dialog " "boxes." msgstr "" #: src/apt_options.cc:176 msgid "Show partial search results (incremental search)" msgstr "" #: src/apt_options.cc:177 msgid "" "If this option is enabled, aptitude will perform searches within the package " "list as you type them. This is convenient, but may slow the program down, " "particularly on older computers." msgstr "" #: src/apt_options.cc:183 msgid "Closing the last view exits the program" msgstr "" #: src/apt_options.cc:184 msgid "" "If this option is enabled, aptitude will stop running when all views " "(package lists, package details, etc) have been closed. Otherwise, aptitude " "will continue running until you select 'Quit' from the Actions menu." msgstr "" #: src/apt_options.cc:190 msgid "Prompt for confirmation at exit" msgstr "" #: src/apt_options.cc:191 msgid "" "If this option is enabled, aptitude will not terminate until you confirm " "that you really want to quit." msgstr "" #: src/apt_options.cc:195 msgid "Pause after downloading files" msgstr "" #: src/apt_options.cc:196 msgid "" "This option controls whether aptitude will wait for confirmation after a " "download before it goes ahead and installs packages." msgstr "" #: src/apt_options.cc:199 msgid "Never" msgstr "" #: src/apt_options.cc:200 msgid "" "Never wait for the user after downloading packages: always begin the " "installation immediately." msgstr "" #: src/apt_options.cc:201 msgid "When an error occurs" msgstr "" #: src/apt_options.cc:202 msgid "" "Wait for confirmation if an error occurred during the download. If there " "were no errors, begin installing packages immediately." msgstr "" #: src/apt_options.cc:203 msgid "Always" msgstr "" #: src/apt_options.cc:204 msgid "" "Always wait for the user to confirm the download before proceeding with the " "installation." msgstr "" #: src/apt_options.cc:206 msgid "Use a 'status-line' download indicator for all downloads" msgstr "" #: src/apt_options.cc:207 msgid "" "If this option is enabled, aptitude will display the status of ongoing " "downloads at the bottom of the screen, rather than opening a new view." msgstr "" #: src/apt_options.cc:211 msgid "Display the information area by default" msgstr "" #: src/apt_options.cc:212 msgid "" "If this option is enabled, the information area (the pane at the bottom of " "the screen) in the package list will be visible when the program starts; " "otherwise, it will be initially hidden." msgstr "" #: src/apt_options.cc:217 msgid "Display tabs for the available views" msgstr "" #: src/apt_options.cc:218 msgid "" "If this option is enabled, tabs will appear at the top of the screen listing " "the currently opened views." msgstr "" #: src/apt_options.cc:221 msgid "Display tabs for the information area" msgstr "" #: src/apt_options.cc:222 msgid "" "If this option is enabled, tabs will appear at the top of the information " "area (the pane at the bottom of the screen) listing the different displays " "of information that can be viewed there." msgstr "" #: src/apt_options.cc:227 msgid "Advance to the next item after changing the state of a package" msgstr "" #: src/apt_options.cc:228 msgid "" "If this option is enabled, then performing an action on a package (for " "instance, installing or removing it) will move the selection to the next " "package in the list." msgstr "" #: src/apt_options.cc:233 msgid "Automatically show why packages are broken" msgstr "" #: src/apt_options.cc:234 msgid "" "If this option is enabled, then highlighting a package that has broken " "dependencies will automatically display the dependencies that are " "unfulfilled in the lower pane of the display." msgstr "" #: src/apt_options.cc:240 msgid "Display flat view instead of default view on startup" msgstr "" #: src/apt_options.cc:241 msgid "" "If this option is enabled, then the first view displayed on startup will be " "a flat view instead of the default view." msgstr "" #: src/apt_options.cc:245 msgid "The default grouping method for package views" msgstr "" #: src/apt_options.cc:246 msgid "" "This option controls how aptitude organizes the package list. See the " "aptitude user's manual for information on how to specify a grouping method." msgstr "" #: src/apt_options.cc:250 msgid "The default display-limit for package views" msgstr "" #: src/apt_options.cc:251 msgid "" "By default, the limit of each package view will be set to the value " "specified by this option. See the aptitude user's manual for detailed " "information about searches." msgstr "" #: src/apt_options.cc:256 msgid "The display format for package views" msgstr "" #: src/apt_options.cc:257 msgid "" "This option controls how aptitude formats lines of the package list. See " "the aptitude user's manual for information on how to specify a display " "format." msgstr "" #: src/apt_options.cc:263 msgid "The display format for the status line" msgstr "" #: src/apt_options.cc:264 msgid "" "This option controls how aptitude formats the status line (the line between " "the package list and the lower pane). See the aptitude user's manual for " "information on how to specify a display format." msgstr "" #: src/apt_options.cc:271 msgid "The display format for the header line" msgstr "" #: src/apt_options.cc:272 msgid "" "This option controls how aptitude formats the header line (the line above " "the package list). See the aptitude user's manual for information on how to " "specify a display format." msgstr "" #: src/apt_options.cc:282 msgid "Automatically upgrade installed packages" msgstr "" #: src/apt_options.cc:283 msgid "" "If this option is enabled, then on startup, aptitude will select all " "upgradable packages for upgrade." msgstr "" #: src/apt_options.cc:287 msgid "Remove obsolete package files after downloading new package lists" msgstr "" #: src/apt_options.cc:288 msgid "" "If this option is enabled, then after package lists are updated aptitude " "will delete from the package cache any package files that can no longer be " "downloaded from any archive in sources.list." msgstr "" #: src/apt_options.cc:293 msgid "URL to use to download changelogs" msgstr "" #: src/apt_options.cc:294 msgid "" "This option controls the server used to download changelogs. You should " "only need to change this if the changelogs move to a different URL." msgstr "" #: src/apt_options.cc:300 msgid "Display a preview of what will be done before doing it" msgstr "" #: src/apt_options.cc:301 msgid "" "If this option is enabled, then when you ask aptitude to perform an install " "run, it will first display a summary of the actions it is going to perform." msgstr "" #: src/apt_options.cc:307 msgid "" "Forget which packages are \"new\" whenever the package lists are updated" msgstr "" #: src/apt_options.cc:308 msgid "" "If this option is enabled, then aptitude will clear the list of new packages " "after you update the package lists (e.g., by pressing 'u')." msgstr "" #: src/apt_options.cc:313 msgid "" "Forget which packages are \"new\" whenever packages are installed or removed" msgstr "" #: src/apt_options.cc:314 msgid "" "If this option is enabled, then aptitude will clear the list of new packages " "after you perform an install run or install or remove packages from the " "command-line." msgstr "" #: src/apt_options.cc:320 msgid "" "Do not display a warning when the first change is made in read-only mode" msgstr "" #: src/apt_options.cc:321 msgid "" "If this option is %Bnot%b enabled, aptitude will display a warning when you " "modify the state of a package if you do not have permissions to apply the " "change to the system." msgstr "" #: src/apt_options.cc:327 msgid "" "Warn when attempting to perform a privileged action as a non-root user" msgstr "" #: src/apt_options.cc:328 msgid "" "If this option is enabled, aptitude will warn you when you attempt to " "perform an action which you do not have permission to do: for instance, " "installing packages as a non-root user. You will be given the option to log " "in as root and perform the action with root privileges." msgstr "" #: src/apt_options.cc:337 msgid "File to log actions into" msgstr "" #: src/apt_options.cc:338 msgid "" "When you install or remove packages, a summary of what aptitude does will be " "written to this file. If the first character of the file name is a pipe " "character ('%B|%b'), the remainder of the name will be interpreted as a " "shell command that is to receive the log on standard input." msgstr "" #: src/apt_options.cc:350 msgid "Automatically resolve dependencies of a package when it is selected" msgstr "" #: src/apt_options.cc:351 msgid "" "If this option is enabled, aptitude will use a simple heuristic to " "immediately resolve the dependencies of each package you flag for " "installation. This is much faster than the built-in dependency resolver, " "but may produce suboptimal results or fail entirely in some scenarios." msgstr "" #: src/apt_options.cc:359 msgid "Automatically fix broken packages before installing or removing" msgstr "" #: src/apt_options.cc:360 msgid "" "If this option is enabled, and you perform an install run while some " "packages are broken, aptitude will automatically apply the current " "suggestion of the problem resolver. Otherwise, aptitude will prompt you for " "a solution to the broken dependencies." msgstr "" #: src/apt_options.cc:367 msgid "Install recommended packages automatically" msgstr "" #: src/apt_options.cc:368 msgid "" "If this option is enabled and \"automatically resolve dependencies\" is also " "enabled, aptitude will attempt to install the recommendations of newly " "installed packages in addition to their outright dependencies. Suggestions " "will not be automatically installed.\n" "If this option is enabled and \"Remove unused packages automatically\" is " "enabled, packages that are recommended by an installed package will not be " "automatically removed." msgstr "" #: src/apt_options.cc:380 msgid "Remove unused packages automatically" msgstr "" #: src/apt_options.cc:381 msgid "" "If this option is enabled, packages that are automatically installed and " "that no manually installed package depends on will be removed from the " "system. Cancelling the removal will flag the package as manually " "installed.\n" "If this option is enabled and \"Install recommended packages automatically\" " "is enabled, automatically installed packages will not be removed if any " "installed package recommends them." msgstr "" #: src/apt_options.cc:392 msgid "Packages that should never be automatically removed" msgstr "" #: src/apt_options.cc:393 msgid "" "Packages matching this search pattern will always be treated as if an " "installed package depends on them: they will never be targeted for removal " "as unused packages." msgstr "" #: src/apt_options.cc:398 msgid "Allow dependency resolutions that break holds or forbids" msgstr "" #: src/apt_options.cc:399 msgid "" "If this option is enabled, then whenever aptitude solves a dependency " "problem, it will consider modifying held packages, or installing forbidden " "package versions. With this option disabled, these solutions will be " "rejected by default.\n" "NOTE: At present, this restriction only applies to situations in which " "aptitude's dependency resolver (the red bar at the bottom of the screen) is " "activated. aptitude will still break holds when automatically installing " "the dependencies of a package that has just been selected for installation " "or upgrade, due to apt bug #470035." msgstr "" #: src/apt_options.cc:525 msgid "UI options" msgstr "" #: src/apt_options.cc:527 msgid "Dependency handling" msgstr "" #: src/apt_options.cc:529 src/pkg_grouppolicy.cc:975 msgid "Miscellaneous" msgstr "" #: src/broken_indicator.cc:128 #, c-format msgid "%ls: Examine" msgstr "" #: src/broken_indicator.cc:138 #, c-format msgid "%ls: Apply" msgstr "" #: src/broken_indicator.cc:144 #, c-format msgid "%ls: Next" msgstr "" #: src/broken_indicator.cc:151 #, c-format msgid "%ls: Previous" msgstr "" #: src/broken_indicator.cc:246 msgid "Dependency resolution disabled." msgstr "" #: src/broken_indicator.cc:257 msgid "Unable to resolve dependencies." msgstr "" #: src/broken_indicator.cc:268 msgid "Fatal error in resolver" msgstr "" #: src/broken_indicator.cc:280 #, c-format msgid "[%d(%d)/...] Resolving dependencies" msgstr "" #: src/broken_indicator.cc:316 src/gtk/resolver.cc:1294 #: src/gtk/resolver.cc:1462 src/solution_dialog.cc:140 #: src/solution_screen.cc:569 msgid "Internal error: unexpected null solution." msgstr "" #: src/broken_indicator.cc:374 msgid "Suggest keeping all packages at their current version." msgstr "" #: src/broken_indicator.cc:382 #, c-format msgid "%d install" msgid_plural "%d installs" msgstr[0] "" msgstr[1] "" #: src/broken_indicator.cc:392 #, c-format msgid "%d removal" msgid_plural "%d removals" msgstr[0] "" msgstr[1] "" #: src/broken_indicator.cc:402 #, c-format msgid "%d keep" msgid_plural "%d keeps" msgstr[0] "" msgstr[1] "" #: src/broken_indicator.cc:412 #, c-format msgid "%d upgrade" msgid_plural "%d upgrades" msgstr[0] "" msgstr[1] "" #: src/broken_indicator.cc:422 #, c-format msgid "%d downgrade" msgid_plural "%d downgrades" msgstr[0] "" msgstr[1] "" #. TRANSLATORS: %F is replaced with a comma separated list such as #. "n1 installs, n2 removals", ... #. #: src/broken_indicator.cc:433 #, c-format msgid "Suggest %F" msgstr "" #: src/cmdline/cmdline_action.cc:54 #, c-format msgid "Unable to find the source package for \"%s\".\n" msgstr "" #: src/cmdline/cmdline_action.cc:211 #, c-format msgid "Unable to satisfy the build-depends: %s.\n" msgstr "" #: src/cmdline/cmdline_action.cc:248 #, c-format msgid "" "Note: \"%s\", providing the virtual package\n" " \"%s\", is already installed.\n" msgstr "" #: src/cmdline/cmdline_action.cc:256 #, c-format msgid "" "Note: \"%s\", providing the virtual package\n" " \"%s\", is already going to be installed.\n" msgstr "" #: src/cmdline/cmdline_action.cc:279 #, c-format msgid "" "\"%s\" exists in the package database, but it is not a\n" "real package and no package provides it.\n" msgstr "" #: src/cmdline/cmdline_action.cc:287 #, c-format msgid "\"%s\" is a virtual package provided by:\n" msgstr "" #: src/cmdline/cmdline_action.cc:290 #, c-format msgid "You must choose one to install.\n" msgstr "" #: src/cmdline/cmdline_action.cc:298 #, c-format msgid "" "Note: selecting \"%s\" instead of the\n" " virtual package \"%s\"\n" msgstr "" #: src/cmdline/cmdline_action.cc:320 #, c-format msgid "%s is already installed at the requested version (%s)\n" msgstr "" #: src/cmdline/cmdline_action.cc:329 #, c-format msgid "%s is not currently installed, so it will not be upgraded.\n" msgstr "" #: src/cmdline/cmdline_action.cc:333 #, c-format msgid "" "%s is already installed at the latest version (%s), so it will not be " "upgraded.\n" msgstr "" #: src/cmdline/cmdline_action.cc:340 #, c-format msgid "%s is not currently installed, so it will not be reinstalled.\n" msgstr "" #: src/cmdline/cmdline_action.cc:348 #, c-format msgid "Package %s is not installed, so it will not be removed\n" msgstr "" #: src/cmdline/cmdline_action.cc:355 #, c-format msgid "Package %s is not installed, so it will not be purged\n" msgstr "" #: src/cmdline/cmdline_action.cc:373 #, c-format msgid "" "Package %s is not installed, cannot be marked/unmarked as automatically " "installed\n" msgstr "" #: src/cmdline/cmdline_action.cc:380 #, c-format msgid "Package %s is not installed, cannot forbid an upgrade\n" msgstr "" #: src/cmdline/cmdline_action.cc:383 #, c-format msgid "Package %s is not upgradable, cannot forbid an upgrade\n" msgstr "" #: src/cmdline/cmdline_action.cc:419 #, c-format msgid "Setting package %s on hold\n" msgstr "" #: src/cmdline/cmdline_action.cc:427 #, c-format msgid "Marking package %s as keep\n" msgstr "" #: src/cmdline/cmdline_action.cc:436 #, c-format msgid "Setting package %s as not on hold\n" msgstr "" #: src/cmdline/cmdline_action.cc:442 #, c-format msgid "Package %s is not on hold\n" msgstr "" #: src/cmdline/cmdline_action.cc:448 #, c-format msgid "Marking package %s as automatically installed\n" msgstr "" #: src/cmdline/cmdline_action.cc:456 #, c-format msgid "Unmarking package %s as automatically installed\n" msgstr "" #: src/cmdline/cmdline_action.cc:465 src/cmdline/cmdline_action.cc:476 #, c-format msgid "Marking version %s of package %s as forbidden\n" msgstr "" #: src/cmdline/cmdline_action.cc:488 #, c-format msgid "Note: selecting the task \"%s: %s\" for installation\n" msgstr "" #: src/cmdline/cmdline_action.cc:518 #, c-format msgid "" "You can only specify a package version with an 'install' command or a " "'forbid-version' command.\n" msgstr "" #: src/cmdline/cmdline_action.cc:527 #, c-format msgid "You can only specify a package archive with an 'install' command.\n" msgstr "" #: src/cmdline/cmdline_action.cc:567 #, c-format msgid "" "Couldn't find package \"%s\", and more than %zu\n" "packages contain \"%s\" in their name.\n" msgstr "" #: src/cmdline/cmdline_action.cc:571 #, c-format msgid "" "Couldn't find package \"%s\". However, the following\n" "packages contain \"%s\" in their name:\n" msgstr "" #: src/cmdline/cmdline_action.cc:593 #, c-format msgid "Couldn't find any package whose name or description matched \"%s\"\n" msgstr "" #: src/cmdline/cmdline_action.cc:596 #, c-format msgid "" "Couldn't find any package matching \"%s\", and more than %zu\n" "packages contain \"%s\" in their description.\n" msgstr "" #: src/cmdline/cmdline_action.cc:600 #, c-format msgid "" "Couldn't find any package matching \"%s\". However, the following\n" "packages contain \"%s\" in their description:\n" msgstr "" #: src/cmdline/cmdline_action.cc:742 #, c-format msgid "Bad action character '%c'\n" msgstr "" #: src/cmdline/cmdline_changelog.cc:131 #: src/cmdline/cmdline_download_progress_display.cc:138 msgid "Get:" msgstr "" #. TRANSLATORS: this stands for "error" and should be the #. same width as the translation of "Ign". #: src/cmdline/cmdline_changelog.cc:141 #: src/cmdline/cmdline_download_progress_display.cc:192 msgid "Err" msgstr "" #: src/cmdline/cmdline_changelog.cc:174 #, c-format msgid "Changelog download failed: %s" msgstr "" #: src/cmdline/cmdline_changelog.cc:195 src/generic/apt/pkg_changelog.cc:450 #: src/generic/apt/pkg_changelog.cc:615 src/view_changelog.cc:272 #, c-format msgid "Changelog of %s" msgstr "" #: src/cmdline/cmdline_changelog.cc:293 msgid "Can't execute sensible-pager, is this a working Debian system?" msgstr "" #: src/cmdline/cmdline_changelog.cc:344 #, c-format msgid "%s is not an official Debian package, cannot display its changelog." msgstr "" #: src/cmdline/cmdline_changelog.cc:405 #, c-format msgid "Couldn't find a changelog for %s" msgstr "" #: src/cmdline/cmdline_changelog.cc:409 #, c-format msgid "Couldn't run pager %s" msgstr "" #: src/cmdline/cmdline_clean.cc:62 #, c-format msgid "E: The clean command takes no arguments\n" msgstr "" #: src/cmdline/cmdline_clean.cc:68 #, c-format msgid "Del %s* %spartial/*\n" msgstr "" #: src/cmdline/cmdline_clean.cc:78 src/cmdline/cmdline_clean.cc:149 #: src/ui.cc:1811 src/ui.cc:1899 msgid "Unable to lock the download directory" msgstr "" #: src/cmdline/cmdline_clean.cc:108 #, c-format msgid "Del %s %s [%sB]\n" msgstr "" #: src/cmdline/cmdline_clean.cc:137 #, c-format msgid "E: The autoclean command takes no arguments\n" msgstr "" #: src/cmdline/cmdline_clean.cc:175 #, c-format msgid "Would free %sB of disk space\n" msgstr "" #: src/cmdline/cmdline_clean.cc:178 #, c-format msgid "Freed %sB of disk space\n" msgstr "" #: src/cmdline/cmdline_do_action.cc:159 #, c-format msgid "Invalid operation %s" msgstr "" #: src/cmdline/cmdline_do_action.cc:233 msgid "Unexpected pattern argument following \"keep-all\"" msgstr "" #: src/cmdline/cmdline_do_action.cc:345 #, c-format msgid "" "Unable to safely resolve dependencies, try running with --full-resolver.\n" msgstr "" #: src/cmdline/cmdline_do_action.cc:385 src/cmdline/cmdline_simulate.cc:59 #: src/main.cc:1267 #, c-format msgid "Abort.\n" msgstr "" #: src/cmdline/cmdline_download.cc:45 #, c-format msgid "download: you must specify at least one package to download\n" msgstr "" #: src/cmdline/cmdline_download.cc:63 #: src/generic/apt/download_install_manager.cc:83 msgid "Couldn't read source list" msgstr "" #: src/cmdline/cmdline_download.cc:90 #, c-format msgid "Can't find a package named \"%s\"" msgstr "" #: src/cmdline/cmdline_download.cc:134 #, c-format msgid "" "No downloadable files for %s version %s; perhaps it is a local or obsolete " "package?" msgstr "" #: src/cmdline/cmdline_download_progress_display.cc:161 msgid "Hit" msgstr "" #. TRANSLATORS: this stands for "ignored" and should be #. the same width as the translation of "Err". #: src/cmdline/cmdline_download_progress_display.cc:188 msgid "Ign" msgstr "" #: src/cmdline/cmdline_download_progress_display.cc:218 #, c-format msgid "Fetched %sB in %s (%sB/s)" msgstr "" #: src/cmdline/cmdline_download_progress_display.cc:237 #, c-format msgid "" "Media change: Please insert the disc labeled '%s' into the drive '%s' and " "press [Enter]." msgstr "" #: src/cmdline/cmdline_download_progress_display.cc:491 msgid "[Working]" msgstr "" #: src/cmdline/cmdline_extract_cache_subset.cc:58 #, c-format msgid "" "extract-cache-entries: at least one argument is required (the directory\n" "to which to write files).\n" msgstr "" #: src/cmdline/cmdline_extract_cache_subset.cc:94 #: src/cmdline/cmdline_resolver.cc:356 src/cmdline/cmdline_user_tag.cc:132 #: src/cmdline/cmdline_versions.cc:312 #, c-format msgid "No such package \"%s\"" msgstr "" #: src/cmdline/cmdline_extract_cache_subset.cc:134 #, c-format msgid "" "No packages were selected by the given search pattern; nothing to do.\n" msgstr "" #: src/cmdline/cmdline_forget_new.cc:58 #, c-format msgid "E: The forget-new command takes no arguments\n" msgstr "" #: src/cmdline/cmdline_forget_new.cc:85 #, c-format msgid "Would forget what packages are new\n" msgstr "" #: src/cmdline/cmdline_moo.cc:16 #, c-format msgid "There are no Easter Eggs in this program.\n" msgstr "" #: src/cmdline/cmdline_moo.cc:19 #, c-format msgid "There really are no Easter Eggs in this program.\n" msgstr "" #: src/cmdline/cmdline_moo.cc:22 #, c-format msgid "" "Didn't I already tell you that there are no Easter Eggs in this program?\n" msgstr "" #: src/cmdline/cmdline_moo.cc:25 #, c-format msgid "Stop it!\n" msgstr "" #: src/cmdline/cmdline_moo.cc:28 #, c-format msgid "Okay, okay, if I give you an Easter Egg, will you go away?\n" msgstr "" #: src/cmdline/cmdline_moo.cc:31 #, c-format msgid "All right, you win.\n" msgstr "" #: src/cmdline/cmdline_moo.cc:42 #, c-format msgid "What is it? It's an elephant being eaten by a snake, of course.\n" msgstr "" #: src/cmdline/cmdline_progress_display.cc:165 src/gtk/download.cc:204 msgid "Done" msgstr "" #. TRANSLATORS: the string replacing "DONE" #. be truncated or padded to 4 characters. #: src/cmdline/cmdline_progress_display.cc:170 msgid "DONE" msgstr "" #: src/cmdline/cmdline_prompt.cc:84 msgid "Couldn't read list of sources" msgstr "" #: src/cmdline/cmdline_prompt.cc:342 msgid "Config files" msgstr "" #: src/cmdline/cmdline_prompt.cc:393 msgid "The following packages are BROKEN:" msgstr "" #: src/cmdline/cmdline_prompt.cc:394 msgid "The following packages are unused and will be REMOVED:" msgstr "" #: src/cmdline/cmdline_prompt.cc:395 msgid "The following packages have been automatically kept back:" msgstr "" #: src/cmdline/cmdline_prompt.cc:396 msgid "The following NEW packages will be automatically installed:" msgstr "" #: src/cmdline/cmdline_prompt.cc:397 msgid "The following packages will be automatically REMOVED:" msgstr "" #: src/cmdline/cmdline_prompt.cc:398 msgid "The following packages will be DOWNGRADED:" msgstr "" #: src/cmdline/cmdline_prompt.cc:399 msgid "The following packages have been kept back:" msgstr "" #: src/cmdline/cmdline_prompt.cc:400 msgid "The following packages will be REINSTALLED:" msgstr "" #: src/cmdline/cmdline_prompt.cc:401 msgid "The following NEW packages will be installed:" msgstr "" #: src/cmdline/cmdline_prompt.cc:402 msgid "The following packages will be REMOVED:" msgstr "" #: src/cmdline/cmdline_prompt.cc:403 msgid "The following packages will be upgraded:" msgstr "" #: src/cmdline/cmdline_prompt.cc:404 msgid "The following partially installed packages will be configured:" msgstr "" #: src/cmdline/cmdline_prompt.cc:459 src/ui.cc:1598 #, c-format msgid "The following ESSENTIAL packages will be REMOVED!\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:468 src/ui.cc:1613 #, c-format msgid "The following ESSENTIAL packages will be BROKEN by this action:\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:478 src/ui.cc:1626 #, c-format msgid "" "WARNING: Performing this action will probably cause your system to break!\n" " Do NOT continue unless you know EXACTLY what you are doing!\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:480 msgid "I am aware that this is a very bad idea" msgstr "" #: src/cmdline/cmdline_prompt.cc:484 src/ui.cc:1627 #, c-format msgid "To continue, type the phrase \"%s\":\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:526 #, c-format msgid "" "WARNING: untrusted versions of the following packages will be installed!\n" "\n" "Untrusted packages could compromise your system's security.\n" "You should only proceed with the installation if you are certain that\n" "this is what you want to do.\n" "\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:538 #, c-format msgid "" "*** WARNING *** Ignoring these trust violations because\n" " %s::CmdLine::Ignore-Trust-Violations is 'true'!\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:547 msgid "" "*** WARNING *** Ignoring these trust violations because\n" " APT::Get::AllowUnauthenticated is 'true'!\n" msgstr "" #. TRANSLATORS: This string is a confirmation message, which #. users (especially CJK users) should be able to input without #. input methods. Please include nothing but ASCII characters. #. The text preceding the pipe character (|) will be ignored and #. can be removed from your translation. #: src/cmdline/cmdline_prompt.cc:558 msgid "Go ahead and ignore the warning|Yes" msgstr "" #. TRANSLATORS: This string is a confirmation message, which #. users (especially CJK users) should be able to input without #. input methods. Please include nothing but ASCII characters. #. The text preceding the pipe character (|) will be ignored and #. can be removed from your translation. #: src/cmdline/cmdline_prompt.cc:564 msgid "Abort instead of overriding the warning|No" msgstr "" #: src/cmdline/cmdline_prompt.cc:575 #, c-format msgid "Do you want to ignore this warning and proceed anyway?\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:576 #, c-format msgid "To continue, enter \"%s\"; to abort, enter \"%s\": " msgstr "" #: src/cmdline/cmdline_prompt.cc:593 #, c-format msgid "Unrecognized input. Enter either \"%s\" or \"%s\".\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:705 #, c-format msgid "The following packages are RECOMMENDED but will NOT be installed:\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:711 #, c-format msgid "The following packages are SUGGESTED but will NOT be installed:\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:717 #, c-format msgid "No packages will be installed, upgraded, or removed.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:719 #, c-format msgid "%lu packages upgraded, %lu newly installed, " msgstr "" #: src/cmdline/cmdline_prompt.cc:723 #, c-format msgid "%lu reinstalled, " msgstr "" #: src/cmdline/cmdline_prompt.cc:725 #, c-format msgid "%lu downgraded, " msgstr "" #: src/cmdline/cmdline_prompt.cc:727 #, c-format msgid "%lu to remove and %lu not upgraded.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:734 #, c-format msgid "Need to get %sB/%sB of archives. " msgstr "" #: src/cmdline/cmdline_prompt.cc:737 #, c-format msgid "Need to get %sB of archives. " msgstr "" #: src/cmdline/cmdline_prompt.cc:744 #, c-format msgid "After unpacking %sB will be used.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:747 #, c-format msgid "After unpacking %sB will be freed.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:769 #, c-format msgid "" "No packages to show -- enter the package names on the line after 'i'.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:775 src/cmdline/cmdline_prompt.cc:790 #: src/pkg_item.cc:407 src/ui.cc:1243 msgid "Press Return to continue." msgstr "" #: src/cmdline/cmdline_prompt.cc:786 #, c-format msgid "No packages found -- enter the package names on the line after 'c'.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:801 #, c-format msgid "" "No packages found -- enter zero or more roots of the search followed by the " "package to justify.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:834 #, c-format msgid "y: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:836 msgid "continue with the installation" msgstr "" #: src/cmdline/cmdline_prompt.cc:838 #, c-format msgid "n: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:840 msgid "abort and quit" msgstr "" #: src/cmdline/cmdline_prompt.cc:842 #, c-format msgid "i: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:844 msgid "" "show information about one or more packages; the package names should follow " "the 'i'" msgstr "" #: src/cmdline/cmdline_prompt.cc:846 #, c-format msgid "c: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:848 msgid "" "show the Debian changelogs of one or more packages; the package names should " "follow the 'c'" msgstr "" #: src/cmdline/cmdline_prompt.cc:850 #, c-format msgid "d: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:852 msgid "toggle the display of dependency information" msgstr "" #: src/cmdline/cmdline_prompt.cc:854 #, c-format msgid "s: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:856 msgid "toggle the display of changes in package sizes" msgstr "" #: src/cmdline/cmdline_prompt.cc:858 #, c-format msgid "v: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:860 msgid "toggle the display of version numbers" msgstr "" #: src/cmdline/cmdline_prompt.cc:862 #, c-format msgid "w: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:864 msgid "" "try to find a reason for installing a single package, or explain why " "installing one package should lead to installing another package." msgstr "" #: src/cmdline/cmdline_prompt.cc:867 #, c-format msgid "r: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:869 msgid "run the automatic dependency resolver to fix the broken dependencies." msgstr "" #: src/cmdline/cmdline_prompt.cc:871 #, c-format msgid "e: %F" msgstr "" #: src/cmdline/cmdline_prompt.cc:873 msgid "enter the full visual interface" msgstr "" #: src/cmdline/cmdline_prompt.cc:876 msgid "" "You may also specify modification to the actions which will be taken. To do " "so, type an action character followed by one or more package names (or " "patterns). The action will be applied to all the packages that you list. " "The following actions are available:" msgstr "" #: src/cmdline/cmdline_prompt.cc:883 src/cmdline/cmdline_resolver.cc:262 msgid "'+' to install packages" msgstr "" #: src/cmdline/cmdline_prompt.cc:886 src/cmdline/cmdline_resolver.cc:264 msgid "" "'+M' to install packages and immediately flag them as automatically installed" msgstr "" #: src/cmdline/cmdline_prompt.cc:888 src/cmdline/cmdline_resolver.cc:266 msgid "'-' to remove packages" msgstr "" #: src/cmdline/cmdline_prompt.cc:890 src/cmdline/cmdline_resolver.cc:268 msgid "'_' to purge packages" msgstr "" #: src/cmdline/cmdline_prompt.cc:892 src/cmdline/cmdline_resolver.cc:270 msgid "'=' to place packages on hold" msgstr "" #: src/cmdline/cmdline_prompt.cc:894 src/cmdline/cmdline_resolver.cc:272 msgid "" "':' to keep packages in their current state without placing them on hold" msgstr "" #: src/cmdline/cmdline_prompt.cc:896 src/cmdline/cmdline_resolver.cc:274 msgid "'&M' to mark packages as automatically installed" msgstr "" #: src/cmdline/cmdline_prompt.cc:898 src/cmdline/cmdline_resolver.cc:276 msgid "'&m' to mark packages as manually installed" msgstr "" #: src/cmdline/cmdline_prompt.cc:900 msgid "'&BD' to install the build-dependencies of a package." msgstr "" #: src/cmdline/cmdline_prompt.cc:903 msgid "" "In the list of actions to be performed, some packages will be followed by " "one or more characters enclosed in braces; for instance: \"aptitude{u}\". " "These characters provide extra information about the package's state, and " "can include any combination of the following:" msgstr "" #: src/cmdline/cmdline_prompt.cc:907 msgid "'a': the package was automatically installed or removed." msgstr "" #: src/cmdline/cmdline_prompt.cc:909 msgid "" "'b': some of the package's dependencies are violated by the proposed changes." msgstr "" #: src/cmdline/cmdline_prompt.cc:911 msgid "'p': the package will be purged in addition to being removed." msgstr "" #: src/cmdline/cmdline_prompt.cc:913 msgid "'u': the package is being removed because it is unused." msgstr "" #: src/cmdline/cmdline_prompt.cc:918 msgid "Commands:" msgstr "" #: src/cmdline/cmdline_prompt.cc:1034 msgid "" "aptitude failed to find a solution to these dependencies. You can solve " "them yourself by hand or type 'n' to quit." msgstr "" #: src/cmdline/cmdline_prompt.cc:1053 msgid "Do you want to continue? [Y/n/?] " msgstr "" #: src/cmdline/cmdline_prompt.cc:1054 msgid "Resolve these dependencies by hand? [N/+/-/_/:/?] " msgstr "" #: src/cmdline/cmdline_prompt.cc:1072 msgid "Invalid response. Please enter a valid command or '?' for help.\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:1078 msgid "" "Enter a package management command (such as '+ package' to install a " "package), 'R' to attempt automatic dependency resolution or 'N' to abort." msgstr "" #: src/cmdline/cmdline_prompt.cc:1110 #, c-format msgid "" "\n" "Dependency information will be shown.\n" "\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:1112 #, c-format msgid "" "\n" "Dependency information will not be shown.\n" "\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:1118 #, c-format msgid "" "\n" "Versions will be shown.\n" "\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:1120 #, c-format msgid "" "\n" "Versions will not be shown.\n" "\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:1125 #, c-format msgid "" "\n" "Size changes will be shown.\n" "\n" msgstr "" #: src/cmdline/cmdline_prompt.cc:1127 #, c-format msgid "" "\n" "Size changes will not be shown.\n" "\n" msgstr "" #: src/cmdline/cmdline_resolver.cc:144 src/cmdline/cmdline_resolver.cc:997 #: src/generic/apt/apt.cc:269 #, c-format msgid "Unable to open %s for writing" msgstr "" #: src/cmdline/cmdline_resolver.cc:150 src/cmdline/cmdline_resolver.cc:1002 #, c-format msgid "Error writing resolver state to %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:152 src/cmdline/cmdline_resolver.cc:1004 msgid "Resolver state successfully written!" msgstr "" #: src/cmdline/cmdline_resolver.cc:217 #, c-format msgid "" "y: %Fn: %Fq: %F.: %F,: %Fo: %Fe: %Fx: %Fr (ID|pkg ver) ...: %F%na (ID|pkg " "ver) ...: %F%n: %F%n pkg... : %F%n%F%F%F%F%F%F%F%F" msgstr "" #: src/cmdline/cmdline_resolver.cc:238 msgid "accept the proposed changes" msgstr "" #: src/cmdline/cmdline_resolver.cc:240 msgid "reject the proposed changes and search for another solution" msgstr "" #: src/cmdline/cmdline_resolver.cc:242 msgid "give up and quit the program" msgstr "" #: src/cmdline/cmdline_resolver.cc:244 msgid "move to the next solution" msgstr "" #: src/cmdline/cmdline_resolver.cc:246 msgid "move to the previous solution" msgstr "" #: src/cmdline/cmdline_resolver.cc:248 msgid "" "toggle between the contents of the solution and an explanation of the " "solution" msgstr "" #: src/cmdline/cmdline_resolver.cc:250 msgid "examine the solution in the visual user interface" msgstr "" #: src/cmdline/cmdline_resolver.cc:252 msgid "" "abort automatic dependency resolution; resolve dependencies by hand instead" msgstr "" #: src/cmdline/cmdline_resolver.cc:254 msgid "" "reject the given package versions; don't display any solutions in which they " "occur. Enter UNINST instead of a version to reject removing the package. " "ID is the integer printed to the left of the action." msgstr "" #: src/cmdline/cmdline_resolver.cc:256 msgid "" "accept the given package versions; display only solutions in which they " "occur. Enter UNINST instead of a version to accept removing the package. " "ID is the integer printed to the left of the action." msgstr "" #: src/cmdline/cmdline_resolver.cc:258 msgid "" "display information about the action labeled ID from the solution. The " "label is the integer printed to the left of the action." msgstr "" #: src/cmdline/cmdline_resolver.cc:260 msgid "adjust the state of the listed packages, where ACTION is one of:" msgstr "" #: src/cmdline/cmdline_resolver.cc:278 msgid "" "Adjustments will cause the current solution to be discarded and recalculated " "as necessary." msgstr "" #: src/cmdline/cmdline_resolver.cc:293 #, c-format msgid "The version %s is available in the following archives:" msgstr "" #: src/cmdline/cmdline_resolver.cc:301 #, c-format msgid "Select the version of %s that should be used: " msgstr "" #: src/cmdline/cmdline_resolver.cc:308 #, c-format msgid "Invalid response. Please enter an integer between 1 and %d." msgstr "" #: src/cmdline/cmdline_resolver.cc:324 #, c-format msgid "Expected at least one package/version pair following '%c'" msgstr "" #: src/cmdline/cmdline_resolver.cc:346 #, c-format msgid "Expected a version or \"%s\" after \"%s\"" msgstr "" #: src/cmdline/cmdline_resolver.cc:372 #, c-format msgid "%s has no version named \"%s\"" msgstr "" #: src/cmdline/cmdline_resolver.cc:398 #, c-format msgid "Allowing the removal of %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:401 #, c-format msgid "Allowing the installation of %s version %s (%s)" msgstr "" #: src/cmdline/cmdline_resolver.cc:411 #, c-format msgid "Rejecting the removal of %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:414 #, c-format msgid "Rejecting the installation of %s version %s (%s)" msgstr "" #: src/cmdline/cmdline_resolver.cc:427 #, c-format msgid "No longer requiring the removal of %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:430 #, c-format msgid "No longer requiring the installation of %s version %s (%s)" msgstr "" #: src/cmdline/cmdline_resolver.cc:439 #, c-format msgid "Requiring the removal of %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:442 #, c-format msgid "Requiring the installation of %s version %s (%s)" msgstr "" #: src/cmdline/cmdline_resolver.cc:491 #, c-format msgid "Allowing this recommendation to be ignored: %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:497 #, c-format msgid "Always obeying this recommendation: %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:506 #, c-format msgid "No longer ignoring this recommendation: %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:512 #, c-format msgid "Ignoring this recommendation: %s" msgstr "" #: src/cmdline/cmdline_resolver.cc:571 #, c-format msgid "Action \"%s\"" msgstr "" #. TRANSLATORS: the substitution is #. replaced in English with something #. like "Pkg1 depends upon Pkg2". #: src/cmdline/cmdline_resolver.cc:584 #, c-format msgid "This action was selected because %ls." msgstr "" #: src/cmdline/cmdline_resolver.cc:586 msgid "" "This action is currently rejected; it will not appear in new solutions." msgstr "" #: src/cmdline/cmdline_resolver.cc:587 msgid "" "This action is currently approved; it will be selected whenever possible." msgstr "" #. TRANSLATORS: the "r" here is #. for "reject", but should not be #. translated since the commands in #. aptitude's internal command-line #. aren't translated. #: src/cmdline/cmdline_resolver.cc:594 #, c-format msgid "Enter \"r %s\" to allow this action to appear in new solutions." msgstr "" #. TRANSLATORS: the "r" here is #. for "reject", but should not be #. translated since the commands in #. aptitude's internal command-line #. aren't translated. #: src/cmdline/cmdline_resolver.cc:600 #, c-format msgid "" "Enter \"r %s\" to prevent this action from appearing in new solutions." msgstr "" #. TRANSLATORS: the "a" here is #. for "approve", but should not be #. translated since the commands in #. aptitude's internal command-line #. aren't translated. #: src/cmdline/cmdline_resolver.cc:606 #, c-format msgid "" "Enter \"a %s\" to cease requiring that new solutions include this action if " "possible." msgstr "" #. TRANSLATORS: the "a" here is #. for "approve", but should not be #. translated since the commands in #. aptitude's internal command-line #. aren't translated. #: src/cmdline/cmdline_resolver.cc:612 #, c-format msgid "" "Enter \"a %s\" to require that new solutions include this action if possible." msgstr "" #: src/cmdline/cmdline_resolver.cc:785 #, c-format msgid "open: %zd; closed: %zd; defer: %zd; conflict: %zd" msgstr "" #: src/cmdline/cmdline_resolver.cc:809 #, c-format msgid "" "Would resolve dependencies, but dependency resolution is disabled.\n" " (%s::ProblemResolver::StepLimit = 0)\n" msgstr "" #: src/cmdline/cmdline_resolver.cc:818 msgid "" "I want to resolve dependencies, but no dependency resolver was created." msgstr "" #: src/cmdline/cmdline_resolver.cc:832 src/cmdline/cmdline_resolver.cc:1175 #: src/gtk/resolver.cc:2058 src/solution_dialog.cc:127 #: src/solution_screen.cc:546 msgid "Resolving dependencies..." msgstr "" #: src/cmdline/cmdline_resolver.cc:892 msgid "The following actions will resolve these dependencies:" msgstr "" #: src/cmdline/cmdline_resolver.cc:910 msgid "Accept this solution? [Y/n/q/?] " msgstr "" #: src/cmdline/cmdline_resolver.cc:937 src/cmdline/cmdline_resolver.cc:1072 msgid "Abandoning all efforts to resolve these dependencies." msgstr "" #: src/cmdline/cmdline_resolver.cc:940 msgid "" "Abandoning automatic dependency resolution and reverting to manual " "resolution." msgstr "" #: src/cmdline/cmdline_resolver.cc:973 msgid "The following commands are available:" msgstr "" #: src/cmdline/cmdline_resolver.cc:994 src/ui.cc:2340 msgid "File to write resolver state to: " msgstr "" #: src/cmdline/cmdline_resolver.cc:1026 msgid "Invalid response; please enter one of the following commands:" msgstr "" #: src/cmdline/cmdline_resolver.cc:1046 msgid "No solution found within the allotted time. Try harder? [Y/n] " msgstr "" #: src/cmdline/cmdline_resolver.cc:1075 msgid "Invalid response; please enter 'y' or 'n'." msgstr "" #: src/cmdline/cmdline_resolver.cc:1084 msgid "Unable to resolve dependencies! Giving up..." msgstr "" #: src/cmdline/cmdline_resolver.cc:1090 msgid "*** No more solutions available ***" msgstr "" #: src/cmdline/cmdline_resolver.cc:1109 msgid "" "*** ERROR: search aborted by fatal exception. You may continue\n" " searching, but some solutions will be unreachable." msgstr "" #: src/cmdline/cmdline_resolver.cc:1186 #, c-format msgid "" "Unable to resolve dependencies for the upgrade because the resolver timed " "out.\n" " You may be able to solve this problem by increasing\n" " Aptitude::ProblemResolver::StepLimit (currently %d)." msgstr "" #: src/cmdline/cmdline_resolver.cc:1196 msgid "Unable to resolve dependencies for the upgrade: no solution found." msgstr "" #: src/cmdline/cmdline_resolver.cc:1202 #, c-format msgid "Unable to resolve dependencies for the upgrade: %s" msgstr "" #: src/cmdline/cmdline_search.cc:204 src/cmdline/cmdline_versions.cc:590 #, c-format msgid "iconv of %s failed.\n" msgstr "" #: src/cmdline/cmdline_search.cc:221 #, c-format msgid "search: You must provide at least one search term\n" msgstr "" #: src/cmdline/cmdline_show_broken.cc:36 #, c-format msgid "but %s is to be installed." msgstr "" #: src/cmdline/cmdline_show_broken.cc:39 #, c-format msgid "but %s is installed and it is kept back." msgstr "" #: src/cmdline/cmdline_show_broken.cc:42 #, c-format msgid "but %s is installed." msgstr "" #: src/cmdline/cmdline_show_broken.cc:49 #, c-format msgid "but it is not installable." msgstr "" #: src/cmdline/cmdline_show_broken.cc:51 #, c-format msgid "but it is not going to be installed." msgstr "" #: src/cmdline/cmdline_show_broken.cc:117 #, c-format msgid "" " which is a virtual package and is not provided by any available package.\n" msgstr "" #: src/cmdline/cmdline_show_broken.cc:121 #, c-format msgid " which is a virtual package, provided by:\n" msgstr "" #: src/cmdline/cmdline_show_broken.cc:138 #, c-format msgid " or" msgstr "" #: src/cmdline/cmdline_show_broken.cc:160 #, c-format msgid "The following packages have unmet dependencies:\n" msgstr "" #: src/cmdline/cmdline_show.cc:196 src/cmdline/cmdline_show.cc:448 #: src/cmdline/cmdline_versions.cc:225 src/gtk/resolver.cc:1192 #: src/solution_fragment.cc:64 msgid "" msgstr "" #: src/cmdline/cmdline_show.cc:217 src/cmdline/cmdline_show.cc:222 #: src/qt/widgets/packages_tab.cc:73 msgid "not installed" msgstr "" #: src/cmdline/cmdline_show.cc:224 src/pkg_columnizer.cc:249 #: src/pkg_ver_item.cc:228 msgid "unpacked" msgstr "" #: src/cmdline/cmdline_show.cc:226 msgid "partially configured" msgstr "" #: src/cmdline/cmdline_show.cc:228 msgid "partially installed" msgstr "" #: src/cmdline/cmdline_show.cc:230 msgid "not installed (configuration files remain)" msgstr "" #: src/cmdline/cmdline_show.cc:232 msgid "awaiting trigger processing by other package(s)" msgstr "" #: src/cmdline/cmdline_show.cc:234 msgid "awaiting trigger processing" msgstr "" #: src/cmdline/cmdline_show.cc:236 src/pkg_columnizer.cc:257 #: src/pkg_ver_item.cc:236 src/qt/widgets/packages_tab.cc:72 msgid "installed" msgstr "" #: src/cmdline/cmdline_show.cc:259 #, c-format msgid "%s; will be purged because nothing depends on it" msgstr "" #: src/cmdline/cmdline_show.cc:261 src/cmdline/cmdline_show.cc:357 #, c-format msgid "%s; will be purged" msgstr "" #: src/cmdline/cmdline_show.cc:266 #, c-format msgid "%s; will be removed because nothing depends on it" msgstr "" #: src/cmdline/cmdline_show.cc:268 #, c-format msgid "%s; will be removed" msgstr "" #: src/cmdline/cmdline_show.cc:286 #, c-format msgid "%s%s; will be downgraded [%s -> %s]" msgstr "" #: src/cmdline/cmdline_show.cc:289 #, c-format msgid "%s%s; will be upgraded [%s -> %s]" msgstr "" #: src/cmdline/cmdline_show.cc:298 msgid "not a real package" msgstr "" #: src/cmdline/cmdline_show.cc:311 msgid " [held]" msgstr "" #: src/cmdline/cmdline_show.cc:325 #, c-format msgid "%s%s; will be installed" msgstr "" #: src/cmdline/cmdline_show.cc:327 #, c-format msgid "%s%s; will be installed automatically" msgstr "" #: src/cmdline/cmdline_show.cc:347 #, c-format msgid "%s; version %s will be installed" msgstr "" #: src/cmdline/cmdline_show.cc:351 #, c-format msgid "%s; version %s will be installed automatically" msgstr "" #: src/cmdline/cmdline_show.cc:377 src/cmdline/cmdline_show.cc:400 msgid "Package: " msgstr "" #: src/cmdline/cmdline_show.cc:378 src/cmdline/cmdline_show.cc:408 #: src/pkg_columnizer.cc:93 msgid "State" msgstr "" #: src/cmdline/cmdline_show.cc:379 src/cmdline/cmdline_show.cc:472 msgid "Provided by" msgstr "" #: src/cmdline/cmdline_show.cc:402 src/pkg_info_screen.cc:118 msgid "Essential: " msgstr "" #: src/cmdline/cmdline_show.cc:402 src/cmdline/cmdline_show.cc:406 #: src/cmdline/cmdline_show.cc:417 src/pkg_info_screen.cc:118 msgid "yes" msgstr "" #: src/cmdline/cmdline_show.cc:406 msgid "New" msgstr "" #: src/cmdline/cmdline_show.cc:411 src/gtk/gui.cc:98 msgid "Forbidden version" msgstr "" #: src/cmdline/cmdline_show.cc:415 msgid "Automatically installed" msgstr "" #: src/cmdline/cmdline_show.cc:417 msgid "no" msgstr "" #: src/cmdline/cmdline_show.cc:421 src/pkg_info_screen.cc:123 msgid "Multi-Arch: " msgstr "" #: src/cmdline/cmdline_show.cc:423 src/gtk/entitysummary.cc:361 #: src/gtk/previewtab.cc:230 msgid "Version: " msgstr "" #: src/cmdline/cmdline_show.cc:424 src/pkg_info_screen.cc:144 msgid "Priority: " msgstr "" #: src/cmdline/cmdline_show.cc:425 src/cmdline/cmdline_show.cc:427 msgid "N/A" msgstr "" #: src/cmdline/cmdline_show.cc:426 src/pkg_info_screen.cc:145 msgid "Section: " msgstr "" #: src/cmdline/cmdline_show.cc:428 src/pkg_info_screen.cc:146 msgid "Maintainer: " msgstr "" #: src/cmdline/cmdline_show.cc:430 src/pkg_info_screen.cc:147 msgid "Architecture: " msgstr "" #: src/cmdline/cmdline_show.cc:433 src/pkg_info_screen.cc:149 msgid "Uncompressed Size: " msgstr "" #: src/cmdline/cmdline_show.cc:437 src/pkg_info_screen.cc:148 msgid "Compressed Size: " msgstr "" #: src/cmdline/cmdline_show.cc:439 msgid "Filename: " msgstr "" #: src/cmdline/cmdline_show.cc:441 msgid "MD5sum: " msgstr "" #: src/cmdline/cmdline_show.cc:445 src/cmdline/cmdline_show.cc:448 #: src/gtk/entityview.cc:606 msgid "Archive" msgstr "" #: src/cmdline/cmdline_show.cc:453 msgid "Depends" msgstr "" #: src/cmdline/cmdline_show.cc:455 msgid "PreDepends" msgstr "" #: src/cmdline/cmdline_show.cc:457 src/cmdline/cmdline_why.cc:290 msgid "Recommends" msgstr "" #: src/cmdline/cmdline_show.cc:459 src/cmdline/cmdline_why.cc:293 msgid "Suggests" msgstr "" #: src/cmdline/cmdline_show.cc:461 msgid "Conflicts" msgstr "" #: src/cmdline/cmdline_show.cc:463 msgid "Breaks" msgstr "" #: src/cmdline/cmdline_show.cc:465 msgid "Replaces" msgstr "" #: src/cmdline/cmdline_show.cc:467 msgid "Obsoletes" msgstr "" #: src/cmdline/cmdline_show.cc:469 msgid "Enhances" msgstr "" #: src/cmdline/cmdline_show.cc:471 src/cmdline/cmdline_why.cc:221 #: src/cmdline/cmdline_why.cc:1622 src/gtk/dependency_chains_tab.cc:207 msgid "Provides" msgstr "" #: src/cmdline/cmdline_show.cc:475 src/gtk/entitysummary.cc:369 #: src/gtk/info.cc:714 src/gtk/previewtab.cc:238 src/pkg_info_screen.cc:102 msgid "Description: " msgstr "" #: src/cmdline/cmdline_show.cc:480 src/pkg_info_screen.cc:106 #: src/pkg_view.cc:257 msgid "Homepage: " msgstr "" #: src/cmdline/cmdline_show.cc:573 #, c-format msgid "Unable to locate package %s" msgstr "" #: src/cmdline/cmdline_show.cc:594 #, c-format msgid "Unable to parse pattern %s" msgstr "" #: src/cmdline/cmdline_simulate.cc:65 #, c-format msgid "Would download/install/remove packages.\n" msgstr "" #: src/cmdline/cmdline_simulate.cc:76 msgid "Internal Error, Ordering didn't finish" msgstr "" #: src/cmdline/cmdline_update.cc:43 src/ui.cc:1735 src/ui.cc:1904 msgid "Deleting obsolete downloaded files" msgstr "" #: src/cmdline/cmdline_update.cc:54 #, c-format msgid "E: The update command takes no arguments\n" msgstr "" #: src/cmdline/cmdline_user_tag.cc:66 #, c-format msgid "Adding user tag \"%s\" to the package \"%s\".\n" msgstr "" #: src/cmdline/cmdline_user_tag.cc:73 #, c-format msgid "Removing user tag \"%s\" from the package \"%s\".\n" msgstr "" #: src/cmdline/cmdline_user_tag.cc:105 #, c-format msgid "%s: too few arguments; expected at least a tag name and a package.\n" msgstr "" #: src/cmdline/cmdline_util.cc:166 #, c-format msgid "No candidate version found for %s\n" msgstr "" #: src/cmdline/cmdline_util.cc:168 #, c-format msgid "No current or candidate version found for %s\n" msgstr "" #: src/cmdline/cmdline_util.cc:192 #, c-format msgid "Unable to find an archive \"%s\" for the package \"%s\"\n" msgstr "" #: src/cmdline/cmdline_util.cc:202 #, c-format msgid "Unable to find a version \"%s\" for the package \"%s\"\n" msgstr "" #: src/cmdline/cmdline_util.cc:208 #, c-format msgid "Internal error: invalid value %i passed to cmdline_find_ver!\n" msgstr "" #: src/cmdline/cmdline_util.cc:238 #, c-format msgid "You cannot specify both an archive and a version for a package\n" msgstr "" #: src/cmdline/cmdline_util.cc:272 #, c-format msgid "Couldn't find task '%s'" msgstr "" #: src/cmdline/cmdline_util.cc:360 #, c-format msgid "%d (%+d) broken" msgid_plural "%d (%+d) broken" msgstr[0] "" msgstr[1] "" #: src/cmdline/cmdline_util.cc:374 #, c-format msgid "%d (%+d) upgradable" msgid_plural "%d (%+d) upgradable" msgstr[0] "" msgstr[1] "" #: src/cmdline/cmdline_util.cc:388 #, c-format msgid "%d (%+d) new" msgid_plural "%d (%+d) new" msgstr[0] "" msgstr[1] "" #: src/cmdline/cmdline_util.cc:399 #, c-format msgid "Current status: %F." msgstr "" #: src/cmdline/cmdline_util.cc:410 #, c-format msgid "There is %d newly obsolete package." msgid_plural "There are %d newly obsolete packages." msgstr[0] "" msgstr[1] "" #: src/cmdline/cmdline_util.cc:422 #, c-format msgid "There is %d newly obsolete package: " msgid_plural "There are %d newly obsolete packages: " msgstr[0] "" msgstr[1] "" #: src/cmdline/cmdline_versions.cc:122 #, c-format msgid "Package %s:" msgstr "" #: src/cmdline/cmdline_versions.cc:159 src/cmdline/cmdline_versions.cc:208 #, c-format msgid "Source package %s:" msgstr "" #: src/cmdline/cmdline_versions.cc:230 #, c-format msgid "Archive %s:" msgstr "" #: src/cmdline/cmdline_versions.cc:519 msgid "--group-by|archive" msgstr "" #: src/cmdline/cmdline_versions.cc:523 msgid "--group-by|auto" msgstr "" #: src/cmdline/cmdline_versions.cc:527 msgid "--group-by|none" msgstr "" #: src/cmdline/cmdline_versions.cc:531 msgid "--group-by|package" msgstr "" #: src/cmdline/cmdline_versions.cc:535 msgid "--group-by|source-package" msgstr "" #: src/cmdline/cmdline_versions.cc:539 msgid "--group-by|source-version" msgstr "" #. TRANSLATORS: --group-by is the argument name and shouldn't #. be translated. #: src/cmdline/cmdline_versions.cc:545 #, c-format msgid "" "Invalid package grouping mode \"%s\" (should be \"auto\", \"none\", " "\"package\", or \"source-package\")" msgstr "" #: src/cmdline/cmdline_versions.cc:607 #, c-format msgid "versions: You must provide at least one package selector\n" msgstr "" #: src/cmdline/cmdline_why.cc:281 msgid "dep_level" msgstr "" #: src/cmdline/cmdline_why.cc:287 msgid "DependsOnly" msgstr "" #: src/cmdline/cmdline_why.cc:301 msgid "version_selection" msgstr "" #: src/cmdline/cmdline_why.cc:306 msgid "Current" msgstr "" #: src/cmdline/cmdline_why.cc:309 msgid "Candidate" msgstr "" #: src/cmdline/cmdline_why.cc:312 src/gtk/gui.cc:91 src/gtk/gui.cc:1417 msgid "Install" msgstr "" #: src/cmdline/cmdline_why.cc:315 msgid "InstallNotCurrent" msgstr "" #: src/cmdline/cmdline_why.cc:323 msgid "allow_choices" msgstr "" #: src/cmdline/cmdline_why.cc:326 msgid "true" msgstr "" #: src/cmdline/cmdline_why.cc:328 msgid "false" msgstr "" #: src/cmdline/cmdline_why.cc:372 #, c-format msgid "Install(%s)" msgstr "" #: src/cmdline/cmdline_why.cc:374 #, c-format msgid "Remove(%s)" msgstr "" #: src/cmdline/cmdline_why.cc:376 #, c-format msgid "Install(%s provides %s)" msgstr "" #: src/cmdline/cmdline_why.cc:380 #, c-format msgid "Remove(%s provides %s)" msgstr "" #: src/cmdline/cmdline_why.cc:1065 #, c-format msgid " ++ Examining %F\n" msgstr "" #: src/cmdline/cmdline_why.cc:1073 msgid " ++ --> skipping, not a conflict\n" msgstr "" #: src/cmdline/cmdline_why.cc:1079 msgid " ++ --> skipping conflict\n" msgstr "" #: src/cmdline/cmdline_why.cc:1085 msgid " ++ --> skipping, not relevant according to params\n" msgstr "" #: src/cmdline/cmdline_why.cc:1091 msgid " ++ --> skipping, parent is not the selected version\n" msgstr "" #: src/cmdline/cmdline_why.cc:1097 msgid " ++ --> skipping, the dep is satisfied by the current version\n" msgstr "" #: src/cmdline/cmdline_why.cc:1103 msgid "Skipping this solution, I've already seen it.\n" msgstr "" #: src/cmdline/cmdline_why.cc:1109 msgid " ++ --> skipping, version check failed\n" msgstr "" #: src/cmdline/cmdline_why.cc:1115 msgid " ++ --> ENQUEUING\n" msgstr "" #: src/cmdline/cmdline_why.cc:1121 #, c-format msgid " ++ --> ENQUEUING %s Provides %s\n" msgstr "" #: src/cmdline/cmdline_why.cc:1129 #, c-format msgid "Starting search with parameters %ls\n" msgstr "" #: src/cmdline/cmdline_why.cc:1185 #, c-format msgid "Unable to find a reason to remove %s.\n" msgstr "" #: src/cmdline/cmdline_why.cc:1187 #, c-format msgid "Unable to find a reason to install %s.\n" msgstr "" #: src/cmdline/cmdline_why.cc:1226 #, c-format msgid "Packages requiring %s:" msgstr "" #: src/cmdline/cmdline_why.cc:1290 src/cmdline/cmdline_why.cc:1318 #: src/cmdline/cmdline_why.cc:1382 #, c-format msgid "No package named \"%s\" exists." msgstr "" #: src/cmdline/cmdline_why.cc:1322 msgid "Unable to parse some match patterns." msgstr "" #: src/cmdline/cmdline_why.cc:1357 #, c-format msgid "" "%s: this command requires at least one argument (the package to query).\n" msgstr "" #: src/cmdline/cmdline_why.h:213 msgid "Unknown version selection, something is very wrong." msgstr "" #: src/cmdline/terminal.cc:44 msgid "Unexpected end-of-file on standard input" msgstr "" #. TRANSLATORS: the text between [] should be #. exactly 4 character cells wide; "ERR" is short #. for "ERROR". #: src/cmdline/text_progress.cc:93 #, c-format msgid "[ ERR] %s" msgstr "" #: src/dep_item.cc:151 msgid "UNSATISFIED" msgstr "" #: src/dep_item.cc:151 src/reason_fragment.cc:241 msgid "UNAVAILABLE" msgstr "" #: src/desc_render.cc:124 src/gtk/aptitude.glade:1051 msgid "Tags" msgstr "" #: src/desc_render.cc:139 msgid "User Tags" msgstr "" #: src/download_item.cc:80 src/download_item.cc:84 src/download_item.cc:106 msgid " [Working]" msgstr "" #: src/download_item.cc:110 src/download_list.cc:362 msgid "[Hit]" msgstr "" #: src/download_item.cc:110 src/download_list.cc:384 msgid "[Downloaded]" msgstr "" #: src/download_list.cc:82 #, c-format msgid "Downloaded %sB in %s (%sB/s)." msgstr "" #: src/download_list.cc:88 #, c-format msgid "%n%nSome files were not downloaded successfully." msgstr "" #: src/download_list.cc:98 src/download_list.cc:346 src/gtk/download.cc:444 msgid "Continue" msgstr "" #: src/download_list.cc:100 src/mine/cmine.cc:296 src/mine/cmine.cc:361 msgid "Cancel" msgstr "" #: src/download_list.cc:214 msgid "Total Progress: " msgstr "" #: src/download_list.cc:243 #, c-format msgid " [ %i%% ] (%sB/s, %s remaining)" msgstr "" #: src/download_list.cc:245 #, c-format msgid " [ %i%% ] (stalled)" msgstr "" #: src/download_list.cc:247 #, c-format msgid " [ %i%% ]" msgstr "" #: src/download_list.cc:265 msgid "Downloading... " msgstr "" #: src/download_list.cc:341 src/gtk/download.cc:441 #, c-format msgid "Please insert the disc labeled \"%s\" into the drive \"%s\"" msgstr "" #: src/download_list.cc:348 src/gtk/download.cc:445 msgid "Abort" msgstr "" #: src/download_list.cc:406 msgid "[IGNORED]" msgstr "" #: src/download_list.cc:412 msgid "[ERROR]" msgstr "" #: src/download_thread.h:138 msgid "Attempt to start a download thread twice!" msgstr "" #: src/generic/apt/aptcache.cc:273 #, c-format msgid "" "Error parsing a user-tag for the package %s: unexpected end-of-line " "following %s." msgstr "" #: src/generic/apt/aptcache.cc:290 #, c-format msgid "Unterminated '\"' in the user-tags list of the package %s." msgstr "" #: src/generic/apt/aptcache.cc:395 msgid "Can't open Aptitude extended state file" msgstr "" #: src/generic/apt/aptcache.cc:409 src/generic/apt/aptcache.cc:527 #: src/generic/apt/aptcache.cc:529 msgid "Reading extended state information" msgstr "" #: src/generic/apt/aptcache.cc:535 src/generic/apt/aptcache.cc:619 #: src/generic/apt/aptcache.cc:622 msgid "Initializing package states" msgstr "" #: src/generic/apt/aptcache.cc:783 msgid "Cannot open Aptitude state file" msgstr "" #: src/generic/apt/aptcache.cc:787 src/generic/apt/aptcache.cc:920 #: src/generic/apt/aptcache.cc:923 msgid "Writing extended state information" msgstr "" #: src/generic/apt/aptcache.cc:911 msgid "Couldn't write state file" msgstr "" #: src/generic/apt/aptcache.cc:928 msgid "Error writing state file" msgstr "" #: src/generic/apt/aptcache.cc:946 #, c-format msgid "failed to remove %s" msgstr "" #: src/generic/apt/aptcache.cc:953 #, c-format msgid "failed to rename %s to %s" msgstr "" #: src/generic/apt/aptcache.cc:961 #, c-format msgid "couldn't replace %s with %s" msgstr "" #: src/generic/apt/aptcache.cc:979 #: src/generic/apt/download_install_manager.cc:219 msgid "" "Could not regain the system lock! (Perhaps another apt or dpkg is running?)" msgstr "" #: src/generic/apt/aptcache.cc:982 msgid "failed to save selections to dpkg database" msgstr "" #: src/generic/apt/aptcache.cc:1714 msgid "Unable to correct dependencies, some packages cannot be installed" msgstr "" #: src/generic/apt/aptcache.cc:2386 msgid "The list of sources could not be read." msgstr "" #: src/generic/apt/aptcache.cc:2393 msgid "The package lists or status file could not be parsed or opened." msgstr "" #: src/generic/apt/aptcache.cc:2396 msgid "" "You may want to update the package lists to correct these missing files" msgstr "" #. TRANSLATORS: Set this string to the name of a configuration #. file in $pkgdatadir/aptitude that overrides defaults for your #. language. This is particularly intended for overriding entries #. in the Aptitude::Sections::Descriptions tree. #. #. For instance, Sections localized for the language .ww might be #. stored in a file named aptitude-defaults.ww, which would be #. indicated by translating "Localized defaults|" below to #. "aptitude-defaults.ww". If you use this mechanism, you should #. also add your defaults file to pkgdata_DATA in Makefile.am. #: src/generic/apt/apt.cc:168 msgid "Localized defaults|" msgstr "" #: src/generic/apt/apt.cc:241 #, c-format msgid "%s is readable but not writable; unable to write configuration file." msgstr "" #: src/generic/apt/apt.cc:286 #, c-format msgid "Unable to replace %s with new configuration file" msgstr "" #: src/generic/apt/apt.cc:437 msgid "" "Could not lock the cache file; this usually means that dpkg or another apt " "tool is already installing packages. Opening in read-only mode; any changes " "you make to the states of packages will NOT be preserved!" msgstr "" #: src/generic/apt/apt.cc:1253 msgid "foreign" msgstr "" #: src/generic/apt/apt.cc:1255 msgid "same" msgstr "" #: src/generic/apt/apt.cc:1258 msgid "allowed" msgstr "" #: src/generic/apt/apt.cc:1347 msgid "main" msgstr "" #: src/generic/apt/apt.cc:1347 msgid "contrib" msgstr "" #: src/generic/apt/apt.cc:1347 msgid "non-free" msgstr "" #: src/generic/apt/apt.cc:1347 msgid "non-US" msgstr "" #: src/generic/apt/aptitude_resolver.cc:441 #, c-format msgid "Invalid hint \"%s\": expected an action, but found nothing." msgstr "" #: src/generic/apt/aptitude_resolver.cc:466 #, c-format msgid "" "Invalid hint \"%s\": expected a component name and a number, but found " "nothing." msgstr "" #: src/generic/apt/aptitude_resolver.cc:485 #, c-format msgid "" "Invalid hint \"%s\": expected the numeric value following the component " "name, but found nothing." msgstr "" #: src/generic/apt/aptitude_resolver.cc:505 #, c-format msgid "Invalid hint \"%s\": the numeric component \"%s\" cannot be parsed." msgstr "" #: src/generic/apt/aptitude_resolver.cc:516 #, c-format msgid "Invalid hint \"%s\": expected a level, but found nothing." msgstr "" #: src/generic/apt/aptitude_resolver.cc:538 #, c-format msgid "Invalid hint \"%s\": expected a target, but found nothing." msgstr "" #: src/generic/apt/aptitude_resolver.cc:565 #, c-format msgid "Invalid hint \"%s\": invalid target: %s" msgstr "" #: src/generic/apt/aptitude_resolver.cc:585 #, c-format msgid "Invalid hint \"%s\": trailing junk after the version." msgstr "" #: src/generic/apt/aptitude_resolver.cc:682 #, c-format msgid "" "Invalid hint \"%s\": the action \"%s\" should be \"approve\", \"reject\", or " "a number." msgstr "" #: src/generic/apt/aptitude_resolver_cost_settings.cc:129 #, c-format msgid "Conflicting types for the cost component %s." msgstr "" #: src/generic/apt/aptitude_resolver_universe.cc:837 #, c-format msgid "" "Invalid safety level \"%s\" (not \"discard\", \"maximum\", \"minimum\", or " "an integer)." msgstr "" #: src/generic/apt/download_install_manager.cc:60 msgid "" "The package cache is not available; unable to download and install packages." msgstr "" #: src/generic/apt/download_install_manager.cc:93 msgid "Internal error: couldn't generate list of packages to download" msgstr "" #: src/generic/apt/download_install_manager.cc:120 #: src/generic/apt/download_update_manager.cc:130 #, c-format msgid "Failed to fetch %s: %s" msgstr "" #: src/generic/apt/download_install_manager.cc:129 msgid "Some files failed to download" msgstr "" #: src/generic/apt/download_install_manager.cc:140 msgid "Unable to correct for unavailable packages" msgstr "" #: src/generic/apt/download_install_manager.cc:175 msgid "Failed to perform requested operation on package. Trying to recover:" msgstr "" #: src/generic/apt/download_update_manager.cc:70 msgid "Couldn't read list of package sources" msgstr "" #: src/generic/apt/download_update_manager.cc:150 msgid "Couldn't clean out list directories" msgstr "" #: src/generic/apt/download_update_manager.cc:155 #: src/generic/apt/download_update_manager.cc:157 msgid "" "Some index files failed to download. They have been ignored, or old ones " "used instead." msgstr "" #: src/generic/apt/download_update_manager.cc:178 msgid "Couldn't rebuild package cache" msgstr "" #: src/generic/apt/dpkg.cc:102 #, c-format msgid "Couldn't chroot into %s for %s" msgstr "" #: src/generic/apt/dpkg.cc:124 #, c-format msgid "Waited for %s but it wasn't there" msgstr "" #: src/generic/apt/dpkg_selections.cc:106 msgid "Failed to create pipe for dpkg selections." msgstr "" #: src/generic/apt/dpkg_selections.cc:114 msgid "Failed to fork process for dpkg selections." msgstr "" #: src/generic/apt/dpkg_selections.cc:191 #, c-format msgid "" "Failed to execute process to save dpkg selections, waitpid error: %d: '%s'" msgstr "" #: src/generic/apt/dpkg_selections.cc:205 #, c-format msgid "" "Failed to execute process to save dpkg selections, dpkg or trying to execute " "it exited with status/errno: %d" msgstr "" #: src/generic/apt/dpkg_selections.cc:210 #, c-format msgid "" "Failed to execute process to save dpkg selections, dpkg killed by signal: %d" msgstr "" #: src/generic/apt/dpkg_selections.cc:215 msgid "" "Failed to execute process to save dpkg selections, dpkg exited with unknown " "problem" msgstr "" #: src/generic/apt/dump_packages.cc:539 src/generic/apt/dump_packages.cc:629 #, c-format msgid "Unable to stat %s." msgstr "" #: src/generic/apt/dump_packages.cc:674 #, c-format msgid "Unable to create truncated cache: %s." msgstr "" #: src/generic/apt/log.cc:56 #, c-format msgid "Unable to open %s to log actions" msgstr "" #. TRANSLATORS: This is a date and time format. See strftime(3). #: src/generic/apt/log.cc:67 msgid "%a, %b %e %Y %T %z" msgstr "" #: src/generic/apt/log.cc:69 #, c-format msgid "Error generating local time (%s)" msgstr "" #: src/generic/apt/log.cc:73 msgid "log report" msgstr "" #: src/generic/apt/log.cc:74 #, c-format msgid "" " IMPORTANT: this log only lists intended actions; actions which fail\n" " due to dpkg problems may not be completed.\n" "\n" msgstr "" #: src/generic/apt/log.cc:75 #, c-format msgid "Will install %li packages, and remove %li packages.\n" msgstr "" #: src/generic/apt/log.cc:79 #, c-format msgid "%sB of disk space will be used\n" msgstr "" #: src/generic/apt/log.cc:82 #, c-format msgid "%sB of disk space will be freed\n" msgstr "" #: src/generic/apt/log.cc:93 msgid "INSTALL" msgstr "" #: src/generic/apt/log.cc:94 msgid "REMOVE" msgstr "" #: src/generic/apt/log.cc:95 msgid "UPGRADE" msgstr "" #: src/generic/apt/log.cc:96 msgid "DOWNGRADE" msgstr "" #: src/generic/apt/log.cc:97 msgid "REINSTALL" msgstr "" #: src/generic/apt/log.cc:98 msgid "HOLD" msgstr "" #: src/generic/apt/log.cc:99 msgid "BROKEN" msgstr "" #: src/generic/apt/log.cc:100 msgid "REMOVE, NOT USED" msgstr "" #: src/generic/apt/log.cc:101 msgid "REMOVE, DEPENDENCIES" msgstr "" #: src/generic/apt/log.cc:102 msgid "INSTALL, DEPENDENCIES" msgstr "" #: src/generic/apt/log.cc:103 msgid "HOLD, DEPENDENCIES" msgstr "" #: src/generic/apt/log.cc:104 msgid "UNCONFIGURED" msgstr "" #: src/generic/apt/log.cc:105 msgid "????????" msgstr "" #: src/generic/apt/log.cc:108 src/generic/apt/log.cc:109 msgid "(no version found)" msgstr "" #: src/generic/apt/log.cc:125 src/generic/apt/log.cc:138 #, c-format msgid "[%s] %s %s\n" msgstr "" #: src/generic/apt/log.cc:146 #, c-format msgid "[%s] %s %s -> %s\n" msgstr "" #: src/generic/apt/log.cc:155 #, c-format msgid "[%s] %s\n" msgstr "" #: src/generic/apt/log.cc:162 msgid "Log complete." msgstr "" #: src/generic/apt/matching/match.cc:3083 #: src/generic/apt/matching/match.cc:3200 msgid "Accessing index" msgstr "" #: src/generic/apt/matching/match.cc:3093 #: src/generic/apt/matching/match.cc:3207 msgid "Filtering packages" msgstr "" #: src/generic/apt/matching/parse.cc:315 #, c-format msgid "Unknown action type: %s" msgstr "" #: src/generic/apt/matching/parse.cc:330 #, c-format msgid "Unknown multiarch type: %s" msgstr "" #: src/generic/apt/matching/parse.cc:370 #, c-format msgid "Unterminated literal string after %s" msgstr "" #: src/generic/apt/matching/parse.cc:467 #, c-format msgid "Unknown priority %s" msgstr "" #: src/generic/apt/matching/parse.cc:486 #, c-format msgid "Match pattern ends unexpectedly (expected '%c')." msgstr "" #: src/generic/apt/matching/parse.cc:489 #, c-format msgid "Expected '%c', got '%c'." msgstr "" #: src/generic/apt/matching/parse.cc:861 src/generic/apt/matching/parse.cc:1306 #: src/generic/apt/matching/parse.cc:1346 #, c-format msgid "Unknown dependency type: %s" msgstr "" #: src/generic/apt/matching/parse.cc:914 #, c-format msgid "Unknown term type: \"%s\"." msgstr "" #. TRANSLATORS: Question marks ("?") are used as prefix for function names. #. Leave the question marks attached to the string placeholders. #: src/generic/apt/matching/parse.cc:928 src/generic/apt/matching/parse.cc:937 #, c-format msgid "" "The ?%s term must be used in a \"wide\" context (a top-level context, or a " "context enclosed by ?%s)." msgstr "" #: src/generic/apt/matching/parse.cc:1164 msgid "Unmatched '('" msgstr "" #: src/generic/apt/matching/parse.cc:1312 msgid "Provides: cannot be broken" msgstr "" #: src/generic/apt/matching/parse.cc:1370 #, c-format msgid "Unknown pattern type: %c" msgstr "" #: src/generic/apt/matching/parse.cc:1390 msgid "Can't search for \"\"" msgstr "" #: src/generic/apt/matching/parse.cc:1418 msgid "Unexpected empty expression" msgstr "" #: src/generic/apt/matching/parse.cc:1447 #, c-format msgid "Badly formed expression: expected '|', got '%c'" msgstr "" #: src/generic/apt/matching/parse.cc:1494 msgid "Unexpected ')'" msgstr "" #: src/generic/apt/parse_dpkg_status.cc:72 msgid "" msgstr "" #: src/generic/apt/parse_dpkg_status.cc:80 msgid "" msgstr "" #: src/generic/apt/pkg_acqfile.cc:50 #, c-format msgid "" "I wasn't able to locate a file for the %s package. This might mean you need " "to manually fix this package. (due to missing arch)" msgstr "" #: src/generic/apt/pkg_acqfile.cc:99 #, c-format msgid "" "The package index files are corrupted. No Filename: field for package %s." msgstr "" #: src/generic/apt/pkg_changelog.cc:591 src/generic/apt/pkg_changelog.cc:596 #, c-format msgid "Failed to download changelogs: %s" msgstr "" #: src/generic/apt/pkg_changelog.cc:601 msgid "Failed to download changelogs: unexpected exception." msgstr "" #: src/generic/apt/resolver_manager.cc:488 #, c-format msgid "Unable to create the output file: child killed by signal %d." msgstr "" #: src/generic/apt/resolver_manager.cc:490 #, c-format msgid "Unable to create the output file: child exited with status %d." msgstr "" #: src/generic/apt/resolver_manager.cc:909 #: src/generic/apt/resolver_manager.cc:911 #, c-format msgid "Failed to parse the cost settings string: %s" msgstr "" #: src/generic/apt/tags.cc:211 src/generic/apt/tags.cc:219 #: src/generic/apt/tags.cc:264 src/generic/apt/tags.cc:272 msgid "Building tag database" msgstr "" #: src/generic/apt/tags.cc:401 msgid "legacy" msgstr "" #: src/generic/apt/tasks.cc:123 #, c-format msgid "Unhandled packages method in task %s: %s" msgstr "" #: src/generic/apt/tasks.cc:484 msgid "Reading task descriptions" msgstr "" #: src/generic/controllers/search_input.cc:109 src/gtk/packagestab.cc:60 msgid "Parse error" msgstr "" #: src/generic/problemresolver/exceptions.h:105 msgid "Cost increments must be strictly positive." msgstr "" #: src/generic/problemresolver/exceptions.h:114 msgid "The maximum cost value was exceeded." msgstr "" #: src/generic/problemresolver/exceptions.h:124 msgid "A single cost level was both added and lower-bounded." msgstr "" #: src/generic/util/parsers.h:734 #, c-format msgid "Expected '%s', but got EOF." msgstr "" #: src/generic/util/parsers.h:736 #, c-format msgid "Expected '%s', but got '%s'." msgstr "" #: src/generic/util/parsers.h:777 msgid "Expected any character, but got EOF." msgstr "" #: src/generic/util/parsers.h:790 msgid "any character" msgstr "" #: src/generic/util/parsers.h:831 #, c-format msgid "Expected %s, but got EOF." msgstr "" #: src/generic/util/parsers.h:842 #, c-format msgid "Expected %s, but got '%c'." msgstr "" #: src/generic/util/parsers.h:1016 msgid "Expected an integer, got EOF." msgstr "" #: src/generic/util/parsers.h:1025 msgid "Expected an integer following '-', got EOF." msgstr "" #: src/generic/util/parsers.h:1031 #, c-format msgid "Expected an integer, got '%c'." msgstr "" #: src/generic/util/parsers.h:1045 src/generic/util/parsers.h:1053 #, c-format msgid "Invalid integer: \"%s\"." msgstr "" #: src/generic/util/parsers.h:1076 #, c-format msgid "Expected EOF, got '%c'." msgstr "" #: src/generic/util/parsers.h:1190 msgid "anything" msgstr "" #. TRANSLATORS: this is used to generate an error #. message; a brief description of what we expected to see #. is inserted into it. #: src/generic/util/parsers.h:1940 src/generic/util/parsers.h:2033 #: src/generic/util/parsers.h:2084 #, c-format msgid "Expected %s" msgstr "" #: src/generic/util/parsers.h:2006 msgid " or " msgstr "" #: src/generic/util/parsers.h:2769 #, c-format msgid "Unexpected %s" msgstr "" #: src/generic/util/temp.cc:319 #, c-format msgid "Unable to create temporary filename from prefix \"%s\"" msgstr "" #: src/generic/util/util.cc:382 #, c-format msgid "Unable to remove \"%s\": %s" msgstr "" #: src/generic/util/util.cc:372 #, c-format msgid "Unable to stat \"%s\"" msgstr "" #: src/generic/util/util.cc:378 #, c-format msgid "Unable to remove \"%s\"" msgstr "" #: src/generic/util/util.cc:388 #, c-format msgid "Unable to list files in \"%s\"" msgstr "" #: src/generic/util/util.cc:405 #, c-format msgid "Failure closing directory \"%s\"" msgstr "" #: src/generic/util/util.cc:411 #, c-format msgid "Unable to remove directory \"%s\"" msgstr "" #: src/gtk/aptitude.glade:6 src/gtk/aptitude.glade:2251 #: src/qt/windows/main_window.cc:44 msgid "Aptitude Package Manager" msgstr "" #: src/gtk/aptitude.glade:19 src/gtk/aptitude.glade:2264 msgid "_File" msgstr "" #: src/gtk/aptitude.glade:28 src/gtk/aptitude.glade:2274 src/ui.cc:2371 msgid "Perform all pending installs and removals" msgstr "" #: src/gtk/aptitude.glade:38 src/gtk/aptitude.glade:2285 src/ui.cc:2374 msgid "Check for new versions of packages" msgstr "" #: src/gtk/aptitude.glade:53 src/gtk/aptitude.glade:2301 src/ui.cc:2379 msgid "Mark all upgradable packages which are not held for upgrade" msgstr "" #: src/gtk/aptitude.glade:63 src/gtk/aptitude.glade:2312 src/ui.cc:2384 msgid "Forget which packages are \"new\"" msgstr "" #: src/gtk/aptitude.glade:72 src/gtk/aptitude.glade:2322 src/ui.cc:2388 msgid "Cancel all pending installations, removals, holds, and upgrades." msgstr "" #: src/gtk/aptitude.glade:81 src/gtk/aptitude.glade:2332 src/ui.cc:2392 msgid "Delete package files which were previously downloaded" msgstr "" #: src/gtk/aptitude.glade:90 src/gtk/aptitude.glade:2342 src/ui.cc:2396 msgid "Delete package files which can no longer be downloaded" msgstr "" #: src/gtk/aptitude.glade:104 src/gtk/aptitude.glade:2357 src/ui.cc:2403 msgid "Reload the package cache" msgstr "" #: src/gtk/aptitude.glade:118 src/gtk/aptitude.glade:2372 src/ui.cc:2413 msgid "Restart the program as root; your settings will be preserved" msgstr "" #: src/gtk/aptitude.glade:127 src/gtk/aptitude.glade:2382 src/ui.cc:2416 msgid "Exit the program" msgstr "" #: src/gtk/aptitude.glade:139 src/gtk/aptitude.glade:2394 msgid "E_dit" msgstr "" #: src/gtk/aptitude.glade:148 src/gtk/aptitude.glade:2404 src/ui.cc:2423 msgid "Undo the last package operation or group of operations" msgstr "" #: src/gtk/aptitude.glade:197 src/gtk/aptitude.glade:2453 msgid "_Package" msgstr "" #: src/gtk/aptitude.glade:209 src/gtk/aptitude.glade:2465 msgid "_View" msgstr "" #: src/gtk/aptitude.glade:218 src/gtk/aptitude.glade:2475 msgid "Change which columns are visible in the currently active view." msgstr "" #: src/gtk/aptitude.glade:232 src/gtk/aptitude.glade:2490 msgid "" "View errors that have occurred in the apt system since the program was " "started." msgstr "" #: src/gtk/aptitude.glade:241 src/gtk/aptitude.glade:2500 msgid "Find chains of dependencies linking one package to another." msgstr "" #: src/gtk/aptitude.glade:288 src/gtk/aptitude.glade:2547 msgid "_Help" msgstr "" #: src/gtk/aptitude.glade:317 src/gtk/aptitude.glade:2576 #: src/gtk/dashboardtab.cc:739 src/gtk/gui.cc:1603 src/gtk/gui.cc:1801 msgid "Dashboard" msgstr "" #: src/gtk/aptitude.glade:336 src/gtk/aptitude.glade:2595 msgid "Update" msgstr "" #: src/gtk/aptitude.glade:347 src/gtk/aptitude.glade:2606 src/gtk/gui.cc:1323 #: src/qt/tabs_manager.cc:241 src/ui.cc:884 src/ui.cc:886 msgid "Packages" msgstr "" #: src/gtk/aptitude.glade:358 src/gtk/aptitude.glade:2617 src/gtk/gui.cc:1033 #: src/gtk/previewtab.cc:118 src/qt/tabs_manager.cc:220 src/ui.cc:1419 msgid "Preview" msgstr "" #: src/gtk/aptitude.glade:369 src/gtk/aptitude.glade:2628 src/gtk/gui.cc:1028 #: src/qt/tabs_manager.cc:263 src/ui.cc:2813 msgid "Resolver" msgstr "" #: src/gtk/aptitude.glade:380 src/gtk/aptitude.glade:2639 msgid "Install/Remove" msgstr "" #: src/gtk/aptitude.glade:583 msgid "Edit Columns..." msgstr "" #: src/gtk/aptitude.glade:625 msgid "Make this the default for new package lists." msgstr "" #: src/gtk/aptitude.glade:640 msgid "Apply these settings to all active package lists." msgstr "" #: src/gtk/aptitude.glade:714 src/gtk/aptitude.glade:1448 #: src/gtk/aptitude.glade:1780 src/gtk/aptitude.glade:1919 msgid "Search:" msgstr "" #: src/gtk/aptitude.glade:745 msgid "Incremental" msgstr "" #: src/gtk/aptitude.glade:765 src/gtk/aptitude.glade:1487 #: src/gtk/aptitude.glade:1819 src/gtk/aptitude.glade:1958 msgid "Errors" msgstr "" #: src/gtk/aptitude.glade:782 src/gtk/aptitude.glade:1836 #: src/gtk/aptitude.glade:1975 msgid "Show " msgstr "" #: src/gtk/aptitude.glade:892 msgid "Versions:" msgstr "" #: src/gtk/aptitude.glade:953 msgid "Dependencies" msgstr "" #: src/gtk/aptitude.glade:983 msgid "Changelog" msgstr "" #: src/gtk/aptitude.glade:1011 msgid "Files" msgstr "" #: src/gtk/aptitude.glade:1022 msgid "popcon" msgstr "" #: src/gtk/aptitude.glade:1031 msgid "Popcon" msgstr "" #: src/gtk/aptitude.glade:1042 msgid "tags" msgstr "" #: src/gtk/aptitude.glade:1076 msgid "Screenshot" msgstr "" #: src/gtk/aptitude.glade:1128 msgid "Fixing upgrade manually:" msgstr "" #: src/gtk/aptitude.glade:1138 src/gtk/dashboardtab.cc:525 msgid "Calculating upgrade..." msgstr "" #: src/gtk/aptitude.glade:1186 msgid "Solutions" msgstr "" #: src/gtk/aptitude.glade:1204 src/gtk/download.cc:261 #: src/gtk/entityview.cc:551 msgid "Status" msgstr "" #: src/gtk/aptitude.glade:1238 msgid "Group by action type" msgstr "" #: src/gtk/aptitude.glade:1242 msgid "" "Arrange the actions of the current solution so that actions that are of the " "same type are placed together (for instance, all the actions that remove " "packages).\n" "\n" "This is the default view mode." msgstr "" #: src/gtk/aptitude.glade:1256 msgid "Group by dependency" msgstr "" #: src/gtk/aptitude.glade:1260 msgid "" "Show the order in which the actions in the current solution were performed " "and the dependency that triggered each action." msgstr "" #: src/gtk/aptitude.glade:1277 msgid "View Mode" msgstr "" #: src/gtk/aptitude.glade:1319 msgid "Rejected" msgstr "" #: src/gtk/aptitude.glade:1334 msgid "No preference" msgstr "" #: src/gtk/aptitude.glade:1350 msgid "Accepted" msgstr "" #: src/gtk/aptitude.glade:1370 msgid "Status of selected action" msgstr "" #: src/gtk/aptitude.glade:1391 msgid "Find a new solution" msgstr "" #: src/gtk/aptitude.glade:1395 msgid "Calculate the next solution that has not yet been generated." msgstr "" #: src/gtk/aptitude.glade:1410 msgid "" "Perform the actions in the currently selected solution and close this tab." msgstr "" #: src/gtk/aptitude.glade:1567 msgid "Upgrade Summary" msgstr "" #: src/gtk/aptitude.glade:1596 msgid "Selected Package" msgstr "" #: src/gtk/aptitude.glade:1643 msgid "Fix Manually" msgstr "" #: src/gtk/aptitude.glade:1656 src/gtk/areas.cc:67 src/gtk/gui.cc:93 #: src/gtk/gui.cc:1408 msgid "Upgrade" msgstr "" #: src/gtk/aptitude.glade:1687 msgid "Available Upgrades:" msgstr "" #: src/gtk/aptitude.glade:1884 msgid "Start at these packages:" msgstr "" #: src/gtk/aptitude.glade:2023 msgid "End at these packages:" msgstr "" #: src/gtk/aptitude.glade:2091 msgid "A terminal running dpkg will appear here." msgstr "" #: src/gtk/aptitude.glade:2104 msgid "" "Placeholder label for the explanation that two conffiles are being " "compared.\n" "This text should not appear in the program." msgstr "" #: src/gtk/aptitude.glade:2133 msgid "View the differences\t" msgstr "" #: src/gtk/aptitude.glade:2159 msgid "" "Do you want to apply these changes?\n" "You can also modify the files by hand, then click \"No\"." msgstr "" #: src/gtk/areas.cc:68 msgid "Keep your computer up-to-date." msgstr "" #: src/gtk/areas.cc:70 msgid "Browse" msgstr "" #: src/gtk/areas.cc:71 msgid "Explore the available packages." msgstr "" #: src/gtk/areas.cc:73 msgid "Find" msgstr "" #: src/gtk/areas.cc:74 msgid "Search for packages." msgstr "" #: src/gtk/areas.cc:76 msgid "Go" msgstr "" #: src/gtk/areas.cc:77 msgid "Finalize and apply your changes to the system." msgstr "" #: src/gtk/areas.cc:79 src/ui.cc:712 src/ui.cc:714 msgid "Preferences" msgstr "" #: src/gtk/areas.cc:80 msgid "Configure aptitude." msgstr "" #: src/gtk/changelog.cc:284 msgid "The changelog is empty." msgstr "" #: src/gtk/changelog.cc:286 msgid "" "No new changelog entries; it looks like you installed a locally compiled " "version of this package." msgstr "" #: src/gtk/changelog.cc:288 msgid "" "No new changelog entries; this is likely due to a binary-only upload of this " "package." msgstr "" #: src/gtk/changelog.cc:390 #, c-format msgid "Failed to download the changelog: %s" msgstr "" #: src/gtk/changelog.cc:554 src/gtk/changelog.cc:692 #, c-format msgid "Parsing the changelog of %s version %s..." msgstr "" #: src/gtk/changelog.cc:659 #, c-format msgid "" "You can only view changelogs of official Debian packages; the origin of %s " "is unknown." msgstr "" #: src/gtk/changelog.cc:663 #, c-format msgid "" "You can only view changelogs of official Debian packages; %s is from %s." msgstr "" #: src/gtk/changelog.cc:739 #, c-format msgid "Downloading the changelog of %s version %s..." msgstr "" #: src/gtk/changelog.cc:931 #, c-format msgid "Preparing to download the changelog of %s version %s." msgstr "" #: src/gtk/dashboardtab.cc:214 msgid "Resolve Upgrade Manually" msgstr "" #: src/gtk/dashboardtab.cc:297 msgid "Preparing to download changelogs" msgstr "" #: src/gtk/dashboardtab.cc:382 msgid "Available upgrades:" msgstr "" #: src/gtk/dashboardtab.cc:399 #, c-format msgid "%d available upgrade:" msgid_plural "%d available upgrades:" msgstr[0] "" msgstr[1] "" #: src/gtk/dashboardtab.cc:618 msgid "No upgrades are available." msgstr "" #: src/gtk/dashboardtab.cc:630 msgid "Unable to calculate an upgrade." msgstr "" #: src/gtk/dashboardtab.cc:639 #, c-format msgid "" "Press \"%s\" to install %d upgrade out of %d." msgid_plural "" "Press \"%s\" to install %d upgrades out of %d." msgstr[0] "" msgstr[1] "" #: src/gtk/dashboardtab.cc:651 #, c-format msgid "" "Press \"%s\" to manually attempt to install the remaining %d upgrade." msgid_plural "" "Press \"%s\" to manually attempt to install the remaining %d upgrades." msgstr[0] "" msgstr[1] "" #: src/gtk/dashboardtab.cc:676 #, c-format msgid "" "Unable to calculate an upgrade. Press \"%s\" to manually search for a " "solution." msgstr "" #: src/gtk/dashboardtab.cc:693 #, c-format msgid "Internal error encountered while calculating an upgrade: %s" msgstr "" #: src/gtk/dependency_chains_tab.cc:80 msgid "Find dependency chains: start" msgstr "" #: src/gtk/dependency_chains_tab.cc:84 msgid "Find dependency chains: end" msgstr "" #: src/gtk/dependency_chains_tab.cc:88 msgid "Find dependency chains: results" msgstr "" #: src/gtk/dependency_chains_tab.cc:228 msgid "Select one or more starting packages and an ending package to search." msgstr "" #: src/gtk/dependency_chains_tab.cc:284 msgid "No dependency chain found." msgstr "" #: src/gtk/download.cc:179 msgid "Ignored" msgstr "" #: src/gtk/download.cc:185 msgid "Failed" msgstr "" #: src/gtk/download.cc:193 msgid "Already downloaded" msgstr "" #: src/gtk/download.cc:248 src/gtk/entityview.cc:397 src/pkg_columnizer.cc:95 #: src/pkg_view.cc:643 msgid "Description" msgstr "" #: src/gtk/download.cc:253 msgid "Progress" msgstr "" #: src/gtk/download.cc:264 msgid "Short Description" msgstr "" #: src/gtk/download.cc:272 msgid "URI" msgstr "" #: src/gtk/download.cc:319 msgid "The download is still in progress. Should it be canceled?" msgstr "" #: src/gtk/download.cc:395 src/gtk/gui.cc:832 msgid "View Details" msgstr "" #: src/gtk/download.cc:439 msgid "Change media" msgstr "" #: src/gtk/download.cc:460 #, c-format msgid "%s: %sB/s" msgstr "" #: src/gtk/download.cc:480 #, c-format msgid "%s: %lu/%lu, %sB/s" msgstr "" #: src/gtk/download.cc:486 #, c-format msgid "%s: %lu/%lu, stalled" msgstr "" #: src/gtk/download.cc:507 #, c-format msgid "%s: %sB of %sB at %sB/s, %s remaining" msgstr "" #: src/gtk/download.cc:514 #, c-format msgid "%s: %sB of %sB, stalled" msgstr "" #: src/gtk/download.cc:541 msgid "Completed" msgstr "" #: src/gtk/download.cc:543 msgid "Completed with errors" msgstr "" #: src/gtk/dpkg_terminal.cc:352 #, c-format msgid "%s: Unable to create a Unix-domain socket: %s" msgstr "" #: src/gtk/dpkg_terminal.cc:388 src/gtk/dpkg_terminal.cc:466 #, c-format msgid "Internal error: the temporary socket name \"%s\" is too long!" msgstr "" #: src/gtk/dpkg_terminal.cc:429 #, c-format msgid "%s: Unable to accept a connection: %s" msgstr "" #: src/gtk/dpkg_terminal.cc:532 #, c-format msgid "[%s] dpkg process starting...\n" msgstr "" #: src/gtk/dpkg_terminal.cc:565 #, c-format msgid "[%s] dpkg process complete.\n" msgstr "" #: src/gtk/dpkg_terminal.cc:568 #, c-format msgid "[%s] dpkg process failed.\n" msgstr "" #: src/gtk/dpkg_terminal.cc:571 #, c-format msgid "" "[%s] dpkg process complete; there are more packages left to process.\n" msgstr "" #: src/gtk/entitysummary.cc:115 #, c-format msgid "Upgrade to %s version %s" msgstr "" #: src/gtk/entitysummary.cc:123 #, c-format msgid "Install %s version %s" msgstr "" #: src/gtk/entitysummary.cc:131 #, c-format msgid "Downgrade to %s version %s" msgstr "" #: src/gtk/entitysummary.cc:142 #, c-format msgid "Don't hold %s at its current version." msgstr "" #: src/gtk/entitysummary.cc:145 src/gtk/entitysummary.cc:165 #: src/gtk/entitysummary.cc:168 #, c-format msgid "Cancel any actions on %s." msgstr "" #: src/gtk/entitysummary.cc:150 #, c-format msgid "Cancel the purge of %s." msgstr "" #: src/gtk/entitysummary.cc:152 #, c-format msgid "Cancel the removal of %s." msgstr "" #: src/gtk/entitysummary.cc:157 #, c-format msgid "Cancel the upgrade of %s." msgstr "" #: src/gtk/entitysummary.cc:159 #, c-format msgid "Cancel the installation of %s." msgstr "" #: src/gtk/entitysummary.cc:161 #, c-format msgid "Cancel the downgrade of %s." msgstr "" #: src/gtk/entitysummary.cc:163 #, c-format msgid "Cancel the reinstallation of %s." msgstr "" #: src/gtk/entitysummary.cc:206 #, c-format msgid "Remove %s" msgstr "" #: src/gtk/entitysummary.cc:210 #, c-format msgid "Purge %s" msgstr "" #: src/gtk/entitysummary.cc:218 #, c-format msgid "Hold %s at its current version." msgstr "" #: src/gtk/entitysummary.cc:223 #, c-format msgid "Mark %s as automatically installed." msgstr "" #: src/gtk/entitysummary.cc:228 #, c-format msgid "Mark %s as manually installed." msgstr "" #: src/gtk/entitysummary.cc:279 #, c-format msgid "%s is a virtual package provided by:\n" msgstr "" #: src/gtk/entitysummary.cc:343 src/gtk/previewtab.cc:215 msgid "(more info...)" msgstr "" #: src/gtk/entitysummary.cc:375 msgid "Source: " msgstr "" #: src/gtk/entityview.cc:381 src/gtk/entityview.cc:575 #: src/qt/widgets/packages_tab.cc:105 msgid "Name" msgstr "" #: src/gtk/entityview.cc:385 msgid "Visible?" msgstr "" #: src/gtk/entityview.cc:411 #, c-format msgid "Columns of \"%s\":" msgstr "" #: src/gtk/entityview.cc:412 #, c-format msgid "Editing the columns of \"%s\"" msgstr "" #: src/gtk/entityview.cc:552 msgid "Icons showing the current and future status of this package." msgstr "" #: src/gtk/entityview.cc:564 src/pkg_columnizer.cc:104 msgid "Auto" msgstr "" #: src/gtk/entityview.cc:570 msgid "Whether the package is automatically installed." msgstr "" #: src/gtk/entityview.cc:576 msgid "The name and description of the package." msgstr "" #: src/gtk/entityview.cc:591 src/qt/widgets/packages_tab.cc:105 msgid "Version" msgstr "" #: src/gtk/entityview.cc:592 msgid "The version number of the package." msgstr "" #: src/gtk/entityview.cc:607 msgid "The package archives that contain this version." msgstr "" #: src/gtk/filesview.cc:295 #, c-format msgid "" "This file list pertains to the currently installed version \"%s\", not the " "selected version \"%s\"." msgstr "" #: src/gtk/filesview.cc:309 msgid "Files list is only available for installed packages." msgstr "" #: src/gtk/gui.cc:80 msgid "Not installed" msgstr "" #: src/gtk/gui.cc:81 msgid "Virtual" msgstr "" #: src/gtk/gui.cc:82 msgid "Unpacked" msgstr "" #: src/gtk/gui.cc:83 msgid "Half-configured" msgstr "" #: src/gtk/gui.cc:84 msgid "Half-installed" msgstr "" #: src/gtk/gui.cc:85 msgid "Configuration files and data remain" msgstr "" #: src/gtk/gui.cc:86 msgid "Triggers awaited" msgstr "" #: src/gtk/gui.cc:87 msgid "Triggers pending" msgstr "" #: src/gtk/gui.cc:88 msgid "Installed" msgstr "" #: src/gtk/gui.cc:92 msgid "Reinstall" msgstr "" #: src/gtk/gui.cc:94 src/gtk/gui.cc:1414 msgid "Downgrade" msgstr "" #: src/gtk/gui.cc:95 src/gtk/gui.cc:1424 msgid "Remove" msgstr "" #: src/gtk/gui.cc:96 msgid "Remove and purge configuration/data" msgstr "" #: src/gtk/gui.cc:97 msgid "Hold (don't upgrade)" msgstr "" #: src/gtk/gui.cc:99 msgid "Unsatisfied dependencies" msgstr "" #: src/gtk/gui.cc:269 msgid "Checking for updates" msgstr "" #: src/gtk/gui.cc:287 msgid "Insufficient privileges." msgstr "" #: src/gtk/gui.cc:290 msgid "You must be root to update the package lists." msgstr "" #: src/gtk/gui.cc:298 src/gtk/gui.cc:946 msgid "Download already running." msgstr "" #: src/gtk/gui.cc:300 src/gtk/gui.cc:948 src/ui.cc:1550 src/ui.cc:1789 msgid "A package-list update or install run is already taking place." msgstr "" #: src/gtk/gui.cc:359 #, c-format msgid "Update %s?" msgstr "" #: src/gtk/gui.cc:385 #, c-format msgid "" "Replace configuration file\n" "'%s'?" msgstr "" #: src/gtk/gui.cc:389 #, c-format msgid "" "The configuration file %s was modified (by you or by a script). An updated " "version is shipped in this package. If you want to keep your current " "version, choose 'No'. Do you want to replace the current file and install " "the new package maintainers version? " msgstr "" #: src/gtk/gui.cc:417 #, c-format msgid "Comparing %s to %s..." msgstr "" #: src/gtk/gui.cc:738 msgid "" "Interrupting this process could leave your system in an inconsistent state. " "Are you sure you want to stop applying your changes?" msgstr "" #: src/gtk/gui.cc:776 msgid "Done applying changes!" msgstr "" #: src/gtk/gui.cc:823 msgid "Applying changes..." msgstr "" #: src/gtk/gui.cc:875 #, c-format msgid "%s: %s" msgstr "" #: src/gtk/gui.cc:878 #, c-format msgid "Error in package %s" msgstr "" #: src/gtk/gui.cc:906 #, c-format msgid "Asking whether to replace the configuration file %s" msgstr "" #: src/gtk/gui.cc:962 src/ui.cc:1290 msgid "Downloading packages" msgstr "" #: src/gtk/gui.cc:1038 msgid "Broken packages" msgstr "" #: src/gtk/gui.cc:1071 msgid "Show broken packages" msgstr "" #: src/gtk/gui.cc:1075 msgid "Resolve dependencies" msgstr "" #: src/gtk/gui.cc:1103 #, c-format msgid "%d package is broken" msgid_plural "%d packages are broken." msgstr[0] "" msgstr[1] "" #: src/gtk/gui.cc:1147 msgid "View changes" msgstr "" #: src/gtk/gui.cc:1151 msgid "Apply changes" msgstr "" #. TRANSLATORS: any numbers in this #. string will be displayed in a larger #. font. #: src/gtk/gui.cc:1192 #, c-format msgid "%d package to install" msgid_plural "%d packages to install" msgstr[0] "" msgstr[1] "" #. TRANSLATORS: any numbers in this #. string will be displayed in a larger #. font. #: src/gtk/gui.cc:1207 #, c-format msgid "%d package to remove" msgid_plural "%d packages to remove" msgstr[0] "" msgstr[1] "" #: src/gtk/gui.cc:1246 #, c-format msgid "Download size: %sB." msgstr "" #: src/gtk/gui.cc:1289 #, c-format msgid "Tags of %s:\n" msgstr "" #: src/gtk/gui.cc:1345 msgid "This feature is not implemented, yet." msgstr "" #: src/gtk/gui.cc:1351 msgid "Not implemented" msgstr "" #: src/gtk/gui.cc:1403 src/gtk/gui.cc:1422 msgid "Install/Upgrade" msgstr "" #: src/gtk/gui.cc:1429 msgid "Purge" msgstr "" #: src/gtk/gui.cc:1434 msgid "Keep" msgstr "" #: src/gtk/gui.cc:1439 msgid "Hold" msgstr "" #: src/gtk/gui.cc:1445 msgid "Set as automatic" msgstr "" #: src/gtk/gui.cc:1450 msgid "Set as manual" msgstr "" #: src/gtk/gui.cc:1455 msgid "Toggle automatic status" msgstr "" #: src/gtk/gui.cc:1780 src/gtk/init.cc:145 #, c-format msgid "Unable to load the user interface definition file %s/aptitude.glade." msgstr "" #: src/gtk/info.cc:159 src/gtk/pkgview.cc:167 msgid "Current status" msgstr "" #: src/gtk/info.cc:161 src/gtk/pkgview.cc:169 msgid "Selected status" msgstr "" #: src/gtk/info.cc:494 msgid "Not available" msgstr "" #: src/gtk/info.cc:543 msgid "Package information: version list" msgstr "" #: src/gtk/info.cc:553 msgid "Package information: dependency list" msgstr "" #: src/gtk/info.cc:595 msgid "Please wait; reloading cache..." msgstr "" #: src/gtk/info.cc:777 msgid "Info" msgstr "" #: src/gtk/packageinformation.cc:104 src/gtk/packageinformation.cc:106 #: src/pkg_columnizer.cc:351 src/pkg_columnizer.cc:372 #: src/pkg_columnizer.cc:379 src/pkg_grouppolicy.cc:269 #: src/pkg_info_screen.cc:144 src/pkg_info_screen.cc:145 #: src/pkg_ver_item.cc:350 src/pkg_ver_item.cc:384 src/qt/package.cc:226 #: src/qt/version.cc:117 msgid "Unknown" msgstr "" #: src/gtk/packagestab.cc:203 #, c-format msgid "No packages matched \"%s\"." msgstr "" #: src/gtk/packagestab.cc:313 msgid "Enter a search and click \"Find\" to display packages." msgstr "" #: src/gtk/packagestab.cc:415 msgid "Packages: " msgstr "" #: src/gtk/pkgview.cc:222 #, c-format msgid "%s was installed automatically." msgstr "" #: src/gtk/pkgview.cc:225 #, c-format msgid "%s is being installed automatically." msgstr "" #: src/gtk/pkgview.cc:233 #, c-format msgid "%s was installed manually." msgstr "" #: src/gtk/pkgview.cc:236 #, c-format msgid "%s is being installed manually." msgstr "" #: src/gtk/pkgview.cc:399 msgid "Cache reloading, please wait..." msgstr "" #: src/gtk/pkgview.cc:605 msgid "Searching..." msgstr "" #: src/gtk/pkgview.cc:716 msgid "Finalizing view" msgstr "" #: src/gtk/pkgview.cc:716 src/pkg_tree.cc:204 src/pkg_tree.cc:215 #: src/pkg_tree.cc:226 src/pkg_tree.cc:238 msgid "Building view" msgstr "" #: src/gtk/previewtab.cc:97 src/pkg_grouppolicy.cc:710 msgid "" "Packages with unsatisfied dependencies\n" " The dependency requirements of these packages will be unmet after the " "install is complete.\n" " .\n" " The presence of this tree probably indicates that something is broken, " "either on your system or in the Debian archive." msgstr "" #: src/gtk/previewtab.cc:98 src/pkg_grouppolicy.cc:711 msgid "" "Packages being removed because they are no longer used\n" " These packages are being deleted because they were automatically installed " "to fulfill dependencies, and the planned action will result in no installed " "package declaring an 'important' dependency on them.\n" msgstr "" #: src/gtk/previewtab.cc:99 src/pkg_grouppolicy.cc:712 msgid "" "Packages being automatically held in their current state\n" " These packages could be upgraded, but they have been kept in their current " "state to avoid breaking dependencies." msgstr "" #: src/gtk/previewtab.cc:100 src/pkg_grouppolicy.cc:713 msgid "" "Packages being automatically installed to satisfy dependencies\n" " These packages are being installed because they are required by another " "package you have chosen for installation." msgstr "" #: src/gtk/previewtab.cc:101 src/pkg_grouppolicy.cc:714 msgid "" "Packages being deleted due to unsatisfied dependencies\n" " These packages are being deleted because one or more of their dependencies " "is no longer available, or because another package conflicts with them." msgstr "" #: src/gtk/previewtab.cc:102 src/pkg_grouppolicy.cc:715 msgid "" "Packages to be downgraded\n" " An older version of these packages than is currently installed will be " "installed." msgstr "" #: src/gtk/previewtab.cc:103 src/pkg_grouppolicy.cc:716 msgid "" "Packages being held back\n" " These packages could be upgraded, but you have asked for them to be held at " "their current version." msgstr "" #: src/gtk/previewtab.cc:104 src/pkg_grouppolicy.cc:717 msgid "" "Packages to be reinstalled\n" " These packages will be reinstalled." msgstr "" #: src/gtk/previewtab.cc:105 src/pkg_grouppolicy.cc:718 msgid "" "Packages to be installed\n" " These packages have been manually selected for installation on your " "computer." msgstr "" #: src/gtk/previewtab.cc:106 src/pkg_grouppolicy.cc:719 msgid "" "Packages to be removed\n" " These packages have been manually selected for removal." msgstr "" #: src/gtk/previewtab.cc:107 src/pkg_grouppolicy.cc:720 msgid "" "Packages to be upgraded\n" " These packages will be upgraded to a newer version." msgstr "" #: src/gtk/previewtab.cc:108 src/pkg_grouppolicy.cc:721 msgid "" "Packages that are partially installed\n" " These packages are not fully installed and configured; an attempt will be " "made to complete their installation." msgstr "" #: src/gtk/previewtab.cc:179 msgid "Preview: " msgstr "" #: src/gtk/resolver.cc:68 #, c-format msgid "Error in dependency resolver: %s" msgstr "" #: src/gtk/resolver.cc:71 #, c-format msgid "" "Fatal error in dependency resolver. You can continue searching, but some " "solutions might be impossible to generate.\n" "\n" "%s" msgstr "" #: src/gtk/resolver.cc:212 msgid "Virtual package" msgstr "" #: src/gtk/resolver.cc:246 src/solution_fragment.cc:453 msgid "Not Installed" msgstr "" #: src/gtk/resolver.cc:377 #, c-format msgid "Removing %s is rejected." msgstr "" #: src/gtk/resolver.cc:382 #, c-format msgid "Canceling the installation of %s is rejected." msgstr "" #: src/gtk/resolver.cc:391 #, c-format msgid "Canceling the removal of %s is rejected." msgstr "" #: src/gtk/resolver.cc:394 #, c-format msgid "Keeping %s at version %s is rejected." msgstr "" #: src/gtk/resolver.cc:401 #, c-format msgid "Installing %s version %s is rejected." msgstr "" #: src/gtk/resolver.cc:407 #, c-format msgid "Downgrading %s to version %s is rejected." msgstr "" #: src/gtk/resolver.cc:413 #, c-format msgid "Upgrading %s to version %s is rejected." msgstr "" #: src/gtk/resolver.cc:430 #, c-format msgid "Removing %s is preferred over all un-accepted alternatives." msgstr "" #: src/gtk/resolver.cc:435 #, c-format msgid "" "Canceling the installation of %s is preferred over all un-accepted " "alternatives." msgstr "" #: src/gtk/resolver.cc:444 #, c-format msgid "" "Canceling the removal of %s is preferred over all un-accepted alternatives." msgstr "" #: src/gtk/resolver.cc:447 #, c-format msgid "" "Keeping %s at version %s is preferred over all un-accepted alternatives." msgstr "" #: src/gtk/resolver.cc:454 #, c-format msgid "" "Installing %s version %s is preferred over all un-accepted alternatives." msgstr "" #: src/gtk/resolver.cc:460 #, c-format msgid "" "Downgrading %s to version %s is preferred over all un-accepted alternatives." msgstr "" #: src/gtk/resolver.cc:466 #, c-format msgid "" "Upgrading %s to version %s is preferred over all un-accepted alternatives." msgstr "" #: src/gtk/resolver.cc:484 #, c-format msgid "Leaving %ls unresolved is rejected." msgstr "" #: src/gtk/resolver.cc:490 #, c-format msgid "" "Leaving %ls unresolved is preferred over all un-accepted alternatives." msgstr "" #: src/gtk/resolver.cc:908 msgid "How to treat the selected action" msgid_plural "How to treat the selected actions" msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:912 msgid "Ignore solutions containing this action." msgid_plural "Ignore solutions containing these actions." msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:916 msgid "" "Allow solutions containing this action, but do not prefer them to other " "solutions." msgid_plural "" "Allow solutions containing these actions, but do not prefer them to other " "solutions." msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:920 msgid "" "Always prefer this action over alternatives that have not been accepted." msgid_plural "" "Always prefer these actions over alternatives that have not been accepted." msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:1240 src/solution_fragment.cc:127 #, c-format msgid "%s depends upon %s" msgstr "" #: src/gtk/resolver.cc:1243 src/solution_fragment.cc:130 #, c-format msgid "%s pre-depends upon %s" msgstr "" #: src/gtk/resolver.cc:1246 src/solution_fragment.cc:133 #, c-format msgid "%s suggests %s" msgstr "" #: src/gtk/resolver.cc:1249 src/solution_fragment.cc:136 #: src/solution_item.cc:602 #, c-format msgid "%s recommends %s" msgstr "" #: src/gtk/resolver.cc:1252 src/solution_fragment.cc:139 #, c-format msgid "%s conflicts with %s" msgstr "" #: src/gtk/resolver.cc:1255 src/solution_fragment.cc:142 #, c-format msgid "%s breaks %s" msgstr "" #: src/gtk/resolver.cc:1258 src/solution_fragment.cc:145 #, c-format msgid "%s replaces %s" msgstr "" #: src/gtk/resolver.cc:1261 src/solution_fragment.cc:148 #, c-format msgid "%s obsoletes %s" msgstr "" #: src/gtk/resolver.cc:1264 src/solution_fragment.cc:151 #, c-format msgid "%s enhances %s" msgstr "" #: src/gtk/resolver.cc:1376 src/gtk/resolver.cc:1841 src/solution_screen.cc:272 msgid "Remove the following packages:" msgstr "" #: src/gtk/resolver.cc:1390 src/gtk/resolver.cc:1853 src/solution_screen.cc:296 msgid "Install the following packages:" msgstr "" #: src/gtk/resolver.cc:1403 src/gtk/resolver.cc:1865 msgid "Keep the following packages:" msgstr "" #: src/gtk/resolver.cc:1416 src/gtk/resolver.cc:1877 src/solution_screen.cc:308 msgid "Upgrade the following packages:" msgstr "" #: src/gtk/resolver.cc:1429 src/gtk/resolver.cc:1890 src/solution_screen.cc:320 msgid "Downgrade the following packages:" msgstr "" #: src/gtk/resolver.cc:1442 src/gtk/resolver.cc:1903 #: src/solution_fragment.cc:509 msgid "Leave the following dependencies unresolved:" msgstr "" #: src/gtk/resolver.cc:1519 #, c-format msgid "Remove %s [%s (%s)]" msgstr "" #: src/gtk/resolver.cc:1526 #, c-format msgid "Install %s [%s (%s)]" msgstr "" #: src/gtk/resolver.cc:1534 #, c-format msgid "Cancel the installation of %s" msgstr "" #: src/gtk/resolver.cc:1537 #, c-format msgid "Cancel the removal of %s" msgstr "" #: src/gtk/resolver.cc:1540 #, c-format msgid "Keep %s at version %s (%s)" msgstr "" #: src/gtk/resolver.cc:1547 #, c-format msgid "Upgrade %s [%s (%s) -> %s (%s)]" msgstr "" #: src/gtk/resolver.cc:1556 #, c-format msgid "Downgrade %s [%s (%s) -> %s (%s)]" msgstr "" #: src/gtk/resolver.cc:1615 #, c-format msgid "Remove %s" msgstr "" #: src/gtk/resolver.cc:1615 #, c-format msgid "remove %s" msgstr "" #: src/gtk/resolver.cc:1624 #, c-format msgid "Keep %s at version %s" msgstr "" #: src/gtk/resolver.cc:1624 #, c-format msgid "keep %s at version %s" msgstr "" #: src/gtk/resolver.cc:1632 #, c-format msgid "Cancel the installation of %s" msgstr "" #: src/gtk/resolver.cc:1632 #, c-format msgid "cancel the installation of %s" msgstr "" #: src/gtk/resolver.cc:1639 #, c-format msgid "Install %s %s" msgstr "" #: src/gtk/resolver.cc:1639 #, c-format msgid "install %s %s" msgstr "" #: src/gtk/resolver.cc:1648 #, c-format msgid "Downgrade %s to version %s" msgstr "" #: src/gtk/resolver.cc:1648 #, c-format msgid "downgrade %s to version %s" msgstr "" #: src/gtk/resolver.cc:1657 #, c-format msgid "Upgrade %s to version %s" msgstr "" #: src/gtk/resolver.cc:1657 #, c-format msgid "upgrade %s to version %s" msgstr "" #: src/gtk/resolver.cc:1670 #, c-format msgid "Leave %s unresolved" msgstr "" #: src/gtk/resolver.cc:1670 #, c-format msgid "leave %s unresolved" msgstr "" #: src/gtk/resolver.cc:1738 #, c-format msgid "%s install" msgid_plural "%s installs" msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:1743 #, c-format msgid "%s remove" msgid_plural "%s removes" msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:1749 #, c-format msgid "%s keep" msgid_plural "%s keeps" msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:1755 #, c-format msgid "%s upgrade" msgid_plural "%s upgrades" msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:1761 #, c-format msgid "%s downgrade" msgid_plural "%s downgrades" msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:1767 #, c-format msgid "%s unresolved recommendation" msgid_plural "%s unresolved recommendations" msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:2059 msgid "No solutions yet." msgstr "" #: src/gtk/resolver.cc:2066 msgid "No dependency solution was found." msgstr "" #: src/gtk/resolver.cc:2067 msgid "No solutions." msgstr "" #: src/gtk/resolver.cc:2078 msgid "To view a solution, select it from the list to the right." msgstr "" #: src/gtk/resolver.cc:2079 #, c-format msgid "%u solution." msgid_plural "%u solutions." msgstr[0] "" msgstr[1] "" #: src/gtk/resolver.cc:2111 #, c-format msgid "Solution %s of %s." msgstr "" #: src/gtk/tab.cc:68 msgid "Download" msgstr "" #: src/load_config.cc:48 #, c-format msgid "Unrecognized color name \"%s\"" msgstr "" #: src/load_config.cc:75 #, c-format msgid "Unrecognized attribute name \"%s\"" msgstr "" #: src/load_config.cc:113 #, c-format msgid "Invalid entry in style definition group: \"%s\"" msgstr "" #: src/load_config.cc:115 #, c-format msgid "Invalid tagless entry in style definition group: \"%s\"" msgstr "" #: src/load_config.cc:127 msgid "The default color may only be used as a background." msgstr "" #: src/load_config.cc:144 #, c-format msgid "Unknown style attribute %s" msgstr "" #: src/load_config.cc:167 src/load_config.cc:169 #, c-format msgid "Invalid entry in keybinding group: \"%s\"" msgstr "" #: src/load_config.cc:184 #, c-format msgid "Ignoring invalid keybinding \"%s\" -> \"%s\"" msgstr "" #: src/load_grouppolicy.cc:290 #, c-format msgid "Expected policy identifier, got '%c'" msgstr "" #: src/load_grouppolicy.cc:306 #, c-format msgid "Expected ',', '%c', or '('; got '%c'" msgstr "" #: src/load_grouppolicy.cc:310 #, c-format msgid "Expected ',' or '(', got '%c'" msgstr "" #: src/load_grouppolicy.cc:318 #, c-format msgid "Unknown grouping policy \"%s\"" msgstr "" #: src/load_grouppolicy.cc:325 #, c-format msgid "Terminal policy '%s' should be the last policy in the list" msgstr "" #: src/load_grouppolicy.cc:386 msgid "Unmatched '(' in grouping policy" msgstr "" #: src/load_grouppolicy.cc:414 #, c-format msgid "Bad section name '%s' (use 'none', 'topdir', 'subdir', or 'subdirs')" msgstr "" #: src/load_grouppolicy.cc:424 #, c-format msgid "Bad passthrough setting '%s' (use 'passthrough' or 'nopassthrough')" msgstr "" #: src/load_grouppolicy.cc:429 src/load_grouppolicy.cc:557 #: src/load_grouppolicy.cc:627 #, c-format msgid "Too many arguments to '%s' grouping policy" msgstr "" #: src/load_grouppolicy.cc:442 src/load_grouppolicy.cc:522 #: src/load_grouppolicy.cc:570 src/load_grouppolicy.cc:581 #: src/load_grouppolicy.cc:592 src/load_grouppolicy.cc:603 #: src/load_grouppolicy.cc:614 src/load_grouppolicy.cc:772 #, c-format msgid "Grouping policy '%s' takes no arguments" msgstr "" #: src/load_grouppolicy.cc:461 src/load_grouppolicy.cc:642 #, c-format msgid "Expected '(' after '%s'" msgstr "" #: src/load_grouppolicy.cc:498 #, c-format msgid "Unable to parse pattern at '%s'" msgstr "" #: src/load_grouppolicy.cc:503 msgid "" "Exactly one filter must be provided as an argument to a 'filter' policy" msgstr "" #: src/load_grouppolicy.cc:552 #, c-format msgid "Bad mode name '%s' (use 'binary' or 'source')" msgstr "" #: src/load_grouppolicy.cc:650 #, c-format msgid "Missing arguments to '%s' grouping policy" msgstr "" #: src/load_grouppolicy.cc:673 #, c-format msgid "Unable to parse pattern after \"%s\"" msgstr "" #: src/load_grouppolicy.cc:711 #, c-format msgid "Unexpected empty tree title after \"%s\"" msgstr "" #: src/load_grouppolicy.cc:730 #, c-format msgid "Expected '{', ')', or ',' following '||', got '%s'" msgstr "" #: src/load_grouppolicy.cc:756 #, c-format msgid "Unmatched '(' in '%s' grouping policy" msgstr "" #: src/load_pkgview.cc:64 msgid "Couldn't parse layout: No column format specified for static item" msgstr "" #: src/load_pkgview.cc:97 msgid "Couldn't parse layout: encoding error in column descriptor" msgstr "" #: src/load_pkgview.cc:118 #, c-format msgid "Couldn't parse layout: unknown view item type \"%s\"" msgstr "" #: src/load_pkgview.cc:125 src/load_pkgview.cc:133 msgid "Couldn't parse layout: no row number specified" msgstr "" #: src/load_pkgview.cc:141 msgid "Couldn't parse layout: no width specified" msgstr "" #: src/load_pkgview.cc:149 msgid "Couldn't parse layout: no height specified" msgstr "" #: src/load_pkgview.cc:180 src/load_pkgview.cc:198 #, c-format msgid "Unknown alignment type '%s'" msgstr "" #: src/load_sortpolicy.cc:51 src/load_sortpolicy.cc:64 #: src/load_sortpolicy.cc:77 src/load_sortpolicy.cc:90 #: src/load_sortpolicy.cc:103 src/load_sortpolicy.cc:117 #, c-format msgid "Sorting policy '%s' takes no arguments" msgstr "" #: src/load_sortpolicy.cc:178 msgid "Invalid zero-length sorting policy name" msgstr "" #: src/load_sortpolicy.cc:196 msgid "Unmatched '(' in sorting policy description" msgstr "" #: src/load_sortpolicy.cc:223 #, c-format msgid "Invalid sorting policy type '%s'" msgstr "" #: src/main.cc:133 #, c-format msgid "Can't decode multibyte string after \"%ls\"" msgstr "" #: src/main.cc:142 #, c-format msgid "Can't decode wide-character string after \"%s\"" msgstr "" #: src/main.cc:150 #, c-format msgid "%s %s compiled at %s %s\n" msgstr "" #: src/main.cc:153 #, c-format msgid "Compiler: g++ %s\n" msgstr "" #: src/main.cc:155 msgid "Compiled against:\n" msgstr "" #: src/main.cc:156 #, c-format msgid " apt version %d.%d.%d\n" msgstr "" #: src/main.cc:159 #, c-format msgid " NCurses version: Unknown\n" msgstr "" #: src/main.cc:161 #, c-format msgid " NCurses version %s\n" msgstr "" #: src/main.cc:163 #, c-format msgid " libsigc++ version: %s\n" msgstr "" #: src/main.cc:165 #, c-format msgid " Gtk+ version %d.%d.%d\n" msgstr "" #: src/main.cc:167 #, c-format msgid " Gtk-- version %d.%d.%d\n" msgstr "" #: src/main.cc:170 #, c-format msgid " Gtk+ support disabled.\n" msgstr "" #: src/main.cc:173 #, c-format msgid " Compiled with Qt %s\n" msgstr "" #: src/main.cc:174 #, c-format msgid " Running on Qt %s\n" msgstr "" #: src/main.cc:176 #, c-format msgid " Qt support disabled.\n" msgstr "" #: src/main.cc:178 msgid "" "\n" "Current library versions:\n" msgstr "" #: src/main.cc:179 #, c-format msgid " NCurses version: %s\n" msgstr "" #: src/main.cc:180 #, c-format msgid " cwidget version: %s\n" msgstr "" #: src/main.cc:181 #, c-format msgid " Apt version: %s\n" msgstr "" #: src/main.cc:187 #, c-format msgid "Usage: aptitude [-S fname] [-u|-i]" msgstr "" #: src/main.cc:189 #, c-format msgid " aptitude [options] ..." msgstr "" #: src/main.cc:191 #, c-format msgid "" " Actions (if none is specified, aptitude will enter interactive mode):\n" "\n" msgstr "" #: src/main.cc:192 #, c-format msgid " install - Install/upgrade packages.\n" msgstr "" #: src/main.cc:193 #, c-format msgid " remove - Remove packages.\n" msgstr "" #: src/main.cc:194 #, c-format msgid " purge - Remove packages and their configuration files.\n" msgstr "" #: src/main.cc:195 #, c-format msgid " hold - Place packages on hold.\n" msgstr "" #: src/main.cc:196 #, c-format msgid " unhold - Cancel a hold command for a package.\n" msgstr "" #: src/main.cc:197 #, c-format msgid "" " markauto - Mark packages as having been automatically installed.\n" msgstr "" #: src/main.cc:198 #, c-format msgid " unmarkauto - Mark packages as having been manually installed.\n" msgstr "" #: src/main.cc:199 #, c-format msgid "" " forbid-version - Forbid aptitude from upgrading to a specific package " "version.\n" msgstr "" #: src/main.cc:200 #, c-format msgid " update - Download lists of new/upgradable packages.\n" msgstr "" #: src/main.cc:201 #, c-format msgid " safe-upgrade - Perform a safe upgrade.\n" msgstr "" #: src/main.cc:202 #, c-format msgid "" " full-upgrade - Perform an upgrade, possibly installing and removing " "packages.\n" msgstr "" #: src/main.cc:203 #, c-format msgid " build-dep - Install the build-dependencies of packages.\n" msgstr "" #: src/main.cc:204 #, c-format msgid " forget-new - Forget what packages are \"new\".\n" msgstr "" #: src/main.cc:205 #, c-format msgid " search - Search for a package by name and/or expression.\n" msgstr "" #: src/main.cc:206 #, c-format msgid " show - Display detailed information about a package.\n" msgstr "" #: src/main.cc:207 #, c-format msgid " versions - Displays the versions of specified packages.\n" msgstr "" #: src/main.cc:208 #, c-format msgid " clean - Erase downloaded package files.\n" msgstr "" #: src/main.cc:209 #, c-format msgid " autoclean - Erase old downloaded package files.\n" msgstr "" #: src/main.cc:210 #, c-format msgid " changelog - View a package's changelog.\n" msgstr "" #: src/main.cc:211 #, c-format msgid " download - Download the .deb file for a package.\n" msgstr "" #: src/main.cc:212 #, c-format msgid "" " reinstall - Download and (possibly) reinstall a currently installed " "package.\n" msgstr "" #: src/main.cc:213 #, c-format msgid "" " why - Show the manually installed packages that require a package, " "or\n" " why one or more packages would require the given package.\n" msgstr "" #: src/main.cc:215 #, c-format msgid "" " why-not - Show the manually installed packages that lead to a " "conflict\n" " with the given package, or why one or more packages would\n" " lead to a conflict with the given package if installed.\n" msgstr "" #: src/main.cc:219 #, c-format msgid " Options:\n" msgstr "" #: src/main.cc:220 #, c-format msgid " -h This help text.\n" msgstr "" #: src/main.cc:222 #, c-format msgid "" " --gui Use the GTK GUI even if disabled in the configuration.\n" msgstr "" #: src/main.cc:224 #, c-format msgid " --no-gui Do not use the GTK GUI even if available.\n" msgstr "" #: src/main.cc:226 #, c-format msgid " --qt Use the Qt GUI.\n" msgstr "" #: src/main.cc:227 #, c-format msgid "" " --no-qt Do not use the Qt GUI even if enabled in the configuration.\n" msgstr "" #: src/main.cc:229 #, c-format msgid " -s Simulate actions, but do not actually perform them.\n" msgstr "" #: src/main.cc:230 #, c-format msgid "" " -d Only download packages, do not install or remove anything.\n" msgstr "" #: src/main.cc:231 #, c-format msgid " -P Always prompt for confirmation of actions.\n" msgstr "" #: src/main.cc:232 #, c-format msgid "" " -y Assume that the answer to simple yes/no questions is 'yes'.\n" msgstr "" #: src/main.cc:233 #, c-format msgid "" " -F format Specify a format for displaying search results; see the " "manual.\n" msgstr "" #: src/main.cc:234 #, c-format msgid "" " -O order Specify how search results should be sorted; see the " "manual.\n" msgstr "" #: src/main.cc:235 #, c-format msgid "" " -w width Specify the display width for formatting search results.\n" msgstr "" #: src/main.cc:236 #, c-format msgid " -f Aggressively try to fix broken packages.\n" msgstr "" #: src/main.cc:237 #, c-format msgid "" " -V Show which versions of packages are to be installed.\n" msgstr "" #: src/main.cc:238 #, c-format msgid "" " -D Show the dependencies of automatically changed packages.\n" msgstr "" #: src/main.cc:239 #, c-format msgid " -Z Show the change in installed size of each package.\n" msgstr "" #: src/main.cc:240 #, c-format msgid "" " -v Display extra information. (may be supplied multiple " "times).\n" msgstr "" #: src/main.cc:241 #, c-format msgid "" " -t [release] Set the release from which packages should be installed.\n" msgstr "" #: src/main.cc:242 #, c-format msgid "" " -q In command-line mode, suppress the incremental progress\n" " indicators.\n" msgstr "" #: src/main.cc:244 #, c-format msgid " -o key=val Directly set the configuration option named 'key'.\n" msgstr "" #: src/main.cc:245 #, c-format msgid "" " --with(out)-recommends\tSpecify whether or not to treat recommends as\n" " strong dependencies.\n" msgstr "" #: src/main.cc:247 #, c-format msgid " -S fname Read the aptitude extended status info from fname.\n" msgstr "" #: src/main.cc:248 #, c-format msgid " -u Download new package lists on startup.\n" msgstr "" #: src/main.cc:249 src/main.cc:251 #, c-format msgid " (terminal interface only)\n" msgstr "" #: src/main.cc:250 #, c-format msgid " -i Perform an install run on startup.\n" msgstr "" #: src/main.cc:253 #, c-format msgid " This aptitude does not have Super Cow Powers.\n" msgstr "" #. TRANSLATORS: This is a log level that the user can pass on #. the command-line or set in the configuration file. #: src/main.cc:377 msgid "trace" msgstr "" #. TRANSLATORS: This is a log level that the user can pass on #. the command-line or set in the configuration file. #: src/main.cc:380 msgid "debug" msgstr "" #. TRANSLATORS: This is a log level that the user can pass on #. the command-line or set in the configuration file. #: src/main.cc:383 msgid "info" msgstr "" #. TRANSLATORS: This is a log level that the user can pass on #. the command-line or set in the configuration file. #: src/main.cc:386 msgid "warn" msgstr "" #. TRANSLATORS: This is a log level that the user can pass on #. the command-line or set in the configuration file. #: src/main.cc:389 msgid "error" msgstr "" #. TRANSLATORS: This is a log level that the user can pass on #. the command-line or set in the configuration file. #: src/main.cc:392 msgid "fatal" msgstr "" #. TRANSLATORS: This is a log level that the user can pass on #. the command-line or set in the configuration file. #: src/main.cc:395 msgid "off" msgstr "" #. TRANSLATORS: both the translated and the untranslated #. log level names are accepted here. #: src/main.cc:463 #, c-format msgid "" "Unknown log level name \"%s\" (expected \"trace\", \"debug\", \"info\", " "\"warn\", \"error\", \"fatal\", or \"off\")." msgstr "" #. TRANSLATORS: following paragraph copied from src/generic/util/logging.h #. * #. * A category consists of one or more nonempty components #. * separated by ".", such as "aptitude.util.logging", with #. * the exception that the root logger is indicated by the #. * empty string (""). #. * #. * A list of the used ones in src/loggers.h #. * #. * So 'logger' here is the name of the 'category', 'component' or #. * 'module', in the case that users want to configure different logging #. * levels for different categories (e.g. level 'warn' for #. * 'aptitude.changelog', debug for 'aptitude.why'), etc. #. #: src/main.cc:486 #, c-format msgid "Invalid logger name \"%s\"." msgstr "" #: src/main.cc:807 #, c-format msgid "Expected a number after -q=\n" msgstr "" #: src/main.cc:816 #, c-format msgid "Expected a number after -q=, got %s\n" msgstr "" #: src/main.cc:840 #, c-format msgid "-o requires an argument of the form key=value, got %s\n" msgstr "" #: src/main.cc:930 #, c-format msgid "No comma following tag name \"%s\".\n" msgstr "" #: src/main.cc:1022 src/main.cc:1032 msgid "WEIRDNESS: unknown option code received\n" msgstr "" #: src/main.cc:1050 msgid "--show-package-names|never" msgstr "" #: src/main.cc:1053 msgid "--show-package-names|auto" msgstr "" #: src/main.cc:1056 msgid "--show-package-names|always" msgstr "" #: src/main.cc:1061 #, c-format msgid "" "Invalid package names display mode \"%s\" (should be \"never\", \"auto\", or " "\"always\")." msgstr "" #: src/main.cc:1067 msgid "no-summary" msgstr "" #: src/main.cc:1069 msgid "first-package" msgstr "" #: src/main.cc:1071 msgid "first-package-and-type" msgstr "" #: src/main.cc:1073 msgid "all-packages" msgstr "" #: src/main.cc:1075 msgid "all-packages-with-dep-versions" msgstr "" #. TRANSLATORS: "why" here is the aptitude command name and should not #. be translated. Both the translated and the untranslated log level #. names are accepted here. #: src/main.cc:1082 #, c-format msgid "" "Invalid \"why\" summary mode \"%s\": expected \"no-summary\", \"first-" "package\", \"first-package-and-type\", \"all-packages\", or \"all-packages-" "with-dep-versions\"." msgstr "" #: src/main.cc:1123 msgid "" "Only one of --auto-clean-on-startup, --clean-on-startup, -i, and -u may be " "specified\n" msgstr "" #: src/main.cc:1132 msgid "" "-u, -i, and --clean-on-startup may not be specified in command-line mode " "(eg, with 'install')" msgstr "" #: src/main.cc:1149 msgid "-u, -i, and --clean-on-startup may not be specified with a command" msgstr "" #: src/main.cc:1222 #, c-format msgid "Command \"%s\" needs arguments\n" msgstr "" #: src/main.cc:1260 #, c-format msgid "Unknown command \"%s\"\n" msgstr "" #: src/main.cc:1272 src/main.cc:1357 #, c-format msgid "Uncaught exception: %s\n" msgstr "" #: src/main.cc:1276 src/main.cc:1361 #, c-format msgid "" "Backtrace:\n" "%s\n" msgstr "" #: src/menu_text_layout.cc:43 src/menu_tree.cc:232 src/ui.cc:258 #: src/view_changelog.cc:168 msgid "Search for: " msgstr "" #: src/menu_text_layout.cc:75 src/menu_tree.cc:249 src/view_changelog.cc:180 msgid "Search backwards for: " msgstr "" #: src/mine/cmine.cc:115 src/mine/cmine.cc:154 src/ui.cc:1794 msgid "Minesweeper" msgstr "" #: src/mine/cmine.cc:120 #, c-format msgid "%i/%i mines %d %s" msgstr "" #: src/mine/cmine.cc:124 src/mine/cmine.cc:129 msgid "second" msgstr "" #: src/mine/cmine.cc:124 src/mine/cmine.cc:129 msgid "seconds" msgstr "" #: src/mine/cmine.cc:126 #, c-format msgid " %s in %d %s" msgstr "" #: src/mine/cmine.cc:127 msgid "Won" msgstr "" #: src/mine/cmine.cc:127 msgid "Lost" msgstr "" #: src/mine/cmine.cc:169 src/mine/cmine.cc:209 #, c-format msgid "Could not open file \"%s\"" msgstr "" #: src/mine/cmine.cc:182 #, c-format msgid "Could not load game from %s" msgstr "" #: src/mine/cmine.cc:242 msgid "The board height must be a positive integer" msgstr "" #: src/mine/cmine.cc:253 msgid "The board width must be a positive integer" msgstr "" #: src/mine/cmine.cc:264 msgid "Invalid mine count; please enter a positive integer" msgstr "" #: src/mine/cmine.cc:284 msgid "Setup custom game" msgstr "" #: src/mine/cmine.cc:286 msgid "Height of board: " msgstr "" #: src/mine/cmine.cc:289 msgid "Width of board: " msgstr "" #: src/mine/cmine.cc:292 msgid "Number of mines: " msgstr "" #: src/mine/cmine.cc:295 src/mine/cmine.cc:360 src/ui.cc:291 src/ui.cc:363 msgid "Ok" msgstr "" #: src/mine/cmine.cc:353 msgid "Choose difficulty level" msgstr "" #: src/mine/cmine.cc:355 msgid "Easy" msgstr "" #: src/mine/cmine.cc:356 msgid "Medium" msgstr "" #: src/mine/cmine.cc:357 msgid "Hard" msgstr "" #: src/mine/cmine.cc:358 msgid "Custom" msgstr "" #: src/mine/cmine.cc:456 msgid "You have won." msgstr "" #: src/mine/cmine.cc:459 msgid "You lose!" msgstr "" #: src/mine/cmine.cc:657 msgid "Enter the filename to load: " msgstr "" #: src/mine/cmine.cc:664 msgid "Enter the filename to save: " msgstr "" #: src/mine/cmine.cc:672 msgid "mine-help.txt" msgstr "" #: src/mine/cmine.cc:674 msgid "Encoding of mine-help.txt|UTF-8" msgstr "" #: src/pkg_columnizer.cc:87 msgid "30 8 8 1 1 40 14 14 11 10 35 9 10 2 1 1 10 9 12 30 17 15" msgstr "" #: src/pkg_columnizer.cc:90 src/ui.cc:2812 msgid "Package" msgstr "" #: src/pkg_columnizer.cc:91 msgid "InstSz" msgstr "" #: src/pkg_columnizer.cc:92 msgid "DebSz" msgstr "" #: src/pkg_columnizer.cc:94 msgid "Action" msgstr "" #: src/pkg_columnizer.cc:96 msgid "InstVer" msgstr "" #: src/pkg_columnizer.cc:97 msgid "CandVer" msgstr "" #: src/pkg_columnizer.cc:98 msgid "LongState" msgstr "" #: src/pkg_columnizer.cc:99 msgid "LongAction" msgstr "" #: src/pkg_columnizer.cc:100 src/qt/widgets/packages_tab.cc:105 msgid "Maintainer" msgstr "" #: src/pkg_columnizer.cc:101 msgid "Priority" msgstr "" #: src/pkg_columnizer.cc:102 msgid "Section" msgstr "" #: src/pkg_columnizer.cc:103 msgid "RC" msgstr "" #: src/pkg_columnizer.cc:105 msgid "Tag" msgstr "" #: src/pkg_columnizer.cc:108 msgid "ProgName" msgstr "" #: src/pkg_columnizer.cc:109 msgid "ProgVer" msgstr "" #: src/pkg_columnizer.cc:110 msgid "#Broken" msgstr "" #: src/pkg_columnizer.cc:111 msgid "DiskUsage" msgstr "" #: src/pkg_columnizer.cc:112 msgid "DownloadSize" msgstr "" #: src/pkg_columnizer.cc:140 src/pkg_columnizer.cc:152 src/pkg_ver_item.cc:98 #: src/pkg_ver_item.cc:163 msgid "" msgstr "" #: src/pkg_columnizer.cc:182 src/pkg_columnizer.cc:193 msgid "" msgstr "" #: src/pkg_columnizer.cc:237 src/pkg_grouppolicy.cc:264 #: src/pkg_grouppolicy.cc:1673 src/qt/package.cc:236 #: src/qt/widgets/packages_tab.cc:73 msgid "virtual" msgstr "" #: src/pkg_columnizer.cc:244 src/pkg_ver_item.cc:215 src/pkg_ver_item.cc:223 msgid "purged" msgstr "" #: src/pkg_columnizer.cc:251 src/pkg_ver_item.cc:230 msgid "half-config" msgstr "" #: src/pkg_columnizer.cc:253 src/pkg_ver_item.cc:232 msgid "half-install" msgstr "" #: src/pkg_columnizer.cc:255 src/pkg_ver_item.cc:234 msgid "config-files" msgstr "" #: src/pkg_columnizer.cc:259 src/pkg_ver_item.cc:238 msgid "triggers-awaited" msgstr "" #: src/pkg_columnizer.cc:261 src/pkg_ver_item.cc:240 msgid "triggers-pending" msgstr "" #: src/pkg_columnizer.cc:263 src/pkg_columnizer.cc:548 src/pkg_ver_item.cc:242 msgid "ERROR" msgstr "" #: src/pkg_columnizer.cc:310 src/pkg_ver_item.cc:300 msgid "hold" msgstr "" #: src/pkg_columnizer.cc:313 msgid "forbidden upgrade" msgstr "" #: src/pkg_columnizer.cc:315 msgid "purge" msgstr "" #: src/pkg_columnizer.cc:315 src/pkg_ver_item.cc:324 msgid "delete" msgstr "" #: src/pkg_columnizer.cc:317 src/pkg_ver_item.cc:218 src/pkg_ver_item.cc:306 msgid "broken" msgstr "" #: src/pkg_columnizer.cc:319 src/pkg_ver_item.cc:310 src/pkg_ver_item.cc:317 #: src/pkg_ver_item.cc:326 msgid "install" msgstr "" #: src/pkg_columnizer.cc:321 msgid "reinstall" msgstr "" #: src/pkg_columnizer.cc:323 msgid "upgrade" msgstr "" #: src/pkg_columnizer.cc:325 src/pkg_columnizer.cc:327 src/pkg_ver_item.cc:312 #: src/pkg_ver_item.cc:319 src/pkg_ver_item.cc:328 src/pkg_ver_item.cc:331 msgid "none" msgstr "" #. TRANSLATORS: Imp = Important #: src/pkg_columnizer.cc:359 src/pkg_ver_item.cc:359 msgid "Imp" msgstr "" #. TRANSLATORS: Req = Required #: src/pkg_columnizer.cc:361 src/pkg_ver_item.cc:362 msgid "Req" msgstr "" #. TRANSLATORS: Std = Standard #: src/pkg_columnizer.cc:363 src/pkg_ver_item.cc:365 msgid "Std" msgstr "" #. TRANSLATORS: Opt = Optional #: src/pkg_columnizer.cc:365 src/pkg_ver_item.cc:368 msgid "Opt" msgstr "" #. TRANSLATORS: Xtr = Extra #: src/pkg_columnizer.cc:367 src/pkg_ver_item.cc:371 msgid "Xtr" msgstr "" #: src/pkg_columnizer.cc:369 src/pkg_ver_item.cc:373 msgid "ERR" msgstr "" #: src/pkg_columnizer.cc:391 #, c-format msgid "#Broken: %ld" msgstr "" #: src/pkg_columnizer.cc:406 #, c-format msgid "Will use %sB of disk space" msgstr "" #: src/pkg_columnizer.cc:414 #, c-format msgid "Will free %sB of disk space" msgstr "" #: src/pkg_columnizer.cc:428 #, c-format msgid "DL Size: %sB" msgstr "" #. TRANSLATORS: Hostname #: src/pkg_columnizer.cc:496 msgid "HN too long" msgstr "" #: src/pkg_columnizer.cc:674 #, c-format msgid "Using default for %s string: '%s'" msgstr "" #: src/pkg_columnizer.cc:679 src/pkg_columnizer.cc:691 #, c-format msgid "Unable to transcode package display format after \"%ls\"" msgstr "" #: src/pkg_columnizer.cc:698 msgid "Internal error: Default column string is unparsable" msgstr "" #: src/pkg_columnizer.cc:725 #, c-format msgid "Forbidden character in position %zu of %s string: '%s'" msgstr "" #: src/pkg_grouppolicy.cc:274 src/pkg_grouppolicy.cc:1036 msgid "Tasks" msgstr "" #: src/pkg_grouppolicy.cc:467 msgid "" "Security Updates\n" " Security updates for these packages are available from security.debian.org." msgstr "" #: src/pkg_grouppolicy.cc:468 msgid "" "Upgradable Packages\n" " A newer version of these packages is available." msgstr "" #: src/pkg_grouppolicy.cc:469 msgid "" "New Packages\n" " These packages have been added to Debian since the last time you cleared " "the list of \"new\" packages (choose \"Forget new packages\" from the " "Actions menu to empty this list)." msgstr "" #: src/pkg_grouppolicy.cc:470 msgid "" "Installed Packages\n" " These packages are currently installed on your computer." msgstr "" #: src/pkg_grouppolicy.cc:471 msgid "" "Not Installed Packages\n" " These packages are not installed on your computer." msgstr "" #: src/pkg_grouppolicy.cc:472 msgid "" "Obsolete and Locally Created Packages\n" " These packages are currently installed on your computer, but they are not " "available from any apt source. They may be obsolete and removed from the " "archive, or you may have built a private version of them yourself." msgstr "" #: src/pkg_grouppolicy.cc:473 msgid "" "Virtual Packages\n" " These packages do not exist; they are names other packages use to require " "or provide some functionality." msgstr "" #: src/pkg_grouppolicy.cc:653 msgid "" "Packages which are recommended by other packages\n" " These packages are not strictly required, but they may be necessary to " "provide full functionality in some other programs that you are installing or " "upgrading." msgstr "" #: src/pkg_grouppolicy.cc:678 msgid "" "Packages which are suggested by other packages\n" " These packages are not required in order to make your system function " "properly, but they may provide enhanced functionality for some programs that " "you are currently installing." msgstr "" #: src/pkg_grouppolicy.cc:876 msgid "unknown" msgstr "" #: src/pkg_grouppolicy.cc:887 #, c-format msgid "Priority %s" msgstr "" #: src/pkg_grouppolicy.cc:970 msgid "End-user" msgstr "" #: src/pkg_grouppolicy.cc:971 msgid "Servers" msgstr "" #: src/pkg_grouppolicy.cc:972 msgid "Development" msgstr "" #: src/pkg_grouppolicy.cc:973 msgid "Localization" msgstr "" #: src/pkg_grouppolicy.cc:974 msgid "Hardware Support" msgstr "" #: src/pkg_grouppolicy.cc:976 msgid "Unrecognized tasks" msgstr "" #: src/pkg_grouppolicy.cc:1037 msgid "" "\n" " Tasks are groups of packages which provide an easy way to select a " "predefined set of packages for a particular purpose." msgstr "" #: src/pkg_grouppolicy.cc:1166 #, c-format msgid "Bad number in format string: %ls" msgstr "" #: src/pkg_grouppolicy.cc:1175 #, c-format msgid "Match indices must be 1 or greater, not \"%s\"" msgstr "" #: src/pkg_grouppolicy.cc:1193 #, c-format msgid "Match index %ls is too large; available groups are (%s)" msgstr "" #: src/pkg_grouppolicy.cc:1432 msgid "TAGLESS PACKAGES" msgstr "" #: src/pkg_grouppolicy.cc:1433 msgid "" "\n" " These packages have not yet been classified in debtags, or the debtags " "database is not present (installing debtags may correct this problem)." msgstr "" #: src/pkg_info_screen.cc:150 msgid "Source Package: " msgstr "" #: src/pkg_info_screen.cc:160 #, c-format msgid "Package names provided by %s" msgstr "" #: src/pkg_info_screen.cc:173 #, c-format msgid "Packages which depend on %s" msgstr "" #: src/pkg_info_screen.cc:179 #, c-format msgid "Versions of %s" msgstr "" #: src/pkg_item.cc:86 #, c-format msgid "" "%s is an essential package!%n%nAre you sure you want to remove it?%nType " "'%s' if you are." msgstr "" #: src/pkg_item.cc:369 src/pkg_ver_item.cc:749 #, c-format msgid "Reporting a bug in %s:\n" msgstr "" #: src/pkg_item.cc:389 msgid "" "You are not root and I cannot find any way to become root. To reconfigure " "this package, install the menu package, the login package, or run aptitude " "as root." msgstr "" #: src/pkg_item.cc:397 #, c-format msgid "Reconfiguring %s\n" msgstr "" #: src/pkg_subtree.cc:163 #, c-format msgid "This group contains %d package." msgid_plural "This group contains %d packages." msgstr[0] "" msgstr[1] "" #: src/pkg_tree.cc:178 msgid "All Packages" msgstr "" #: src/pkg_tree.cc:282 #, c-format msgid "No packages matched the pattern \"%ls\"." msgstr "" #: src/pkg_tree.cc:301 msgid "Enter the new package tree limit: " msgstr "" #: src/pkg_tree.cc:334 msgid "Enter the new package grouping mechanism for this display: " msgstr "" #: src/pkg_tree.cc:342 msgid "Enter the new package sorting mechanism for this display: " msgstr "" #: src/pkg_view.cc:164 msgid "Couldn't cw::util::transcode column definition" msgstr "" #: src/pkg_view.cc:171 msgid "Couldn't parse column definition" msgstr "" #: src/pkg_view.cc:222 msgid "" "If you select a package, an explanation of why it should be installed or " "removed will appear in this space." msgstr "" #: src/pkg_view.cc:271 msgid "provides" msgstr "" #: src/pkg_view.cc:284 msgid "Virtual package not provided by any package." msgstr "" #: src/pkg_view.cc:289 msgid "Virtual package provided by:" msgstr "" #: src/pkg_view.cc:565 msgid "make_package_view: error in arguments -- two main widgets??" msgstr "" #: src/pkg_view.cc:571 msgid "" "make_package_view: error in arguments -- bad column list for static item" msgstr "" #: src/pkg_view.cc:646 msgid "Related Dependencies" msgstr "" #: src/pkg_view.cc:649 msgid "Why Installed" msgstr "" #: src/pkg_view.cc:668 msgid "make_package_view: bad argument!" msgstr "" #: src/pkg_view.cc:720 msgid "make_package_view: no main widget found" msgstr "" #: src/qt/tabs_manager.cc:254 msgid "Perform Changes" msgstr "" #: src/qt/widgets/packages_tab.cc:72 msgid "all" msgstr "" #: src/qt/widgets/packages_tab.cc:72 msgid "installed locally" msgstr "" #: src/qt/widgets/packages_tab.cc:72 msgid "new" msgstr "" #: src/qt/widgets/packages_tab.cc:78 msgid "Show:" msgstr "" #: src/qt/widgets/packages_tab.cc:84 msgid "Manage Filters" msgstr "" #: src/qt/widgets/packages_tab.cc:105 msgid "Name and Description" msgstr "" #: src/qt/widgets/packages_tab.cc:111 msgid "Find:" msgstr "" #: src/qt/widgets/packages_tab.cc:113 msgid "by" msgstr "" #: src/qt/windows/main_window.cc:96 msgid "&File" msgstr "" #: src/qt/windows/main_window.cc:104 msgid "&Packages" msgstr "" #: src/qt/windows/main_window.cc:112 msgid "&Help" msgstr "" #: src/reason_fragment.cc:31 msgid "depends on" msgstr "" #: src/reason_fragment.cc:33 msgid "pre-depends on" msgstr "" #: src/reason_fragment.cc:35 msgid "suggests" msgstr "" #: src/reason_fragment.cc:36 msgid "recommends" msgstr "" #: src/reason_fragment.cc:38 msgid "conflicts with" msgstr "" #: src/reason_fragment.cc:40 msgid "breaks" msgstr "" #: src/reason_fragment.cc:42 msgid "replaces" msgstr "" #: src/reason_fragment.cc:43 msgid "obsoletes" msgstr "" #: src/reason_fragment.cc:44 msgid "enhances" msgstr "" #: src/reason_fragment.cc:155 #, c-format msgid " (provided by %F)" msgstr "" #: src/reason_fragment.cc:272 #, c-format msgid "%F%s %F %F" msgstr "" #: src/reason_fragment.cc:321 msgid "" "If you select a package, an explanation of its current state will appear in " "this space." msgstr "" #: src/reason_fragment.cc:355 msgid "" "%B%s%b was installed automatically; it is being removed because all of the " "packages which depend upon it are being removed:" msgstr "" #: src/reason_fragment.cc:359 msgid "%B%s%b will be automatically removed because of dependency errors:" msgstr "" #: src/reason_fragment.cc:363 msgid "" "%B%s%b will be automatically installed to satisfy the following dependencies:" msgstr "" #: src/reason_fragment.cc:369 src/reason_fragment.cc:381 msgid "" "%B%s%b cannot be upgraded now, but if it could be, it would still be held at " "version %B%s%b." msgstr "" #: src/reason_fragment.cc:372 msgid "" "%B%s%b will not be upgraded to version %B%s%b, to avoid breaking the " "following dependencies:" msgstr "" #: src/reason_fragment.cc:384 msgid "%B%s%b is currently installed." msgstr "" #: src/reason_fragment.cc:390 msgid "%B%s%b is not currently installed." msgstr "" #: src/reason_fragment.cc:398 msgid "Some dependencies of %B%s%b are not satisfied:" msgstr "" #: src/reason_fragment.cc:402 msgid "%B%s%b will be downgraded." msgstr "" #: src/reason_fragment.cc:409 msgid "%B%s%b will not be upgraded to the forbidden version %B%s%b." msgstr "" #: src/reason_fragment.cc:413 msgid "" "%B%s%b could be upgraded to version %B%s%b, but it is being held at version " "%B%s%b." msgstr "" #: src/reason_fragment.cc:420 msgid "%B%s%b will be re-installed." msgstr "" #: src/reason_fragment.cc:424 msgid "%B%s%b will be installed." msgstr "" #: src/reason_fragment.cc:428 msgid "%B%s%b will be removed." msgstr "" #: src/reason_fragment.cc:433 msgid "%B%s%b will be upgraded from version %B%s%b to version %B%s%b." msgstr "" #: src/reason_fragment.cc:440 msgid "%B%s%b is only partly installed; its installation will be completed." msgstr "" #: src/reason_fragment.cc:472 msgid "" "The following packages depend on %B%s%b and will be broken by its removal:" msgstr "" #: src/reason_fragment.cc:475 msgid "The following packages depend on %B%s%b and are broken:" msgstr "" #: src/reason_fragment.cc:482 msgid "" "The following packages conflict with %B%s%b and will be broken by its " "installation:" msgstr "" #: src/reason_fragment.cc:515 msgid "" "The following packages depend on a version of %B%s%b other than the " "currently installed version of %B%s%b, or conflict with the currently " "installed version:" msgstr "" #: src/reason_fragment.cc:519 msgid "" "The following packages conflict with %B%s%b, or depend on a version of it " "which is not going to be installed." msgstr "" #: src/reason_fragment.cc:523 msgid "The following packages conflict with %B%s%b:" msgstr "" #: src/reason_fragment.cc:528 msgid "" "The following packages depend on a version of %B%s%b other than the " "currently installed version of %B%s%b:" msgstr "" #: src/reason_fragment.cc:532 msgid "" "The following packages depend on a version of %B%s%b which is not going to " "be installed." msgstr "" #: src/reason_fragment.cc:538 msgid "upgraded" msgstr "" #: src/reason_fragment.cc:538 msgid "downgraded" msgstr "" #: src/reason_fragment.cc:544 msgid "" "The following packages depend on the currently installed version of %B%s%b " "(%B%s%b), or conflict with the version it will be %s to (%B%s%b), and will " "be broken if it is %s." msgstr "" #: src/reason_fragment.cc:551 msgid "" "The following packages conflict with version %B%s%b of %B%s%b, and will be " "broken if it is %s." msgstr "" #: src/reason_fragment.cc:556 msgid "" "The following packages depend on version %B%s%b of %B%s%b, and will be " "broken if it is %s." msgstr "" #: src/solution_dialog.cc:97 src/solution_screen.cc:505 msgid "The package cache is not available." msgstr "" #: src/solution_dialog.cc:105 msgid "No packages are broken." msgstr "" #: src/solution_dialog.cc:114 src/solution_screen.cc:528 msgid "No resolution found." msgstr "" #: src/solution_dialog.cc:183 msgid "Previous" msgstr "" #: src/solution_dialog.cc:184 msgid "Next" msgstr "" #: src/solution_dialog.cc:185 msgid "Apply" msgstr "" #: src/solution_dialog.cc:186 msgid "Close" msgstr "" #: src/solution_fragment.cc:164 #, c-format msgid "%s conflicts with %s [provided by %s %s]" msgstr "" #: src/solution_fragment.cc:177 #, c-format msgid "Removing %s" msgstr "" #: src/solution_fragment.cc:179 #, c-format msgid "Installing %s %s (%s)" msgstr "" #: src/solution_fragment.cc:185 #, c-format msgid "Leave %ls unresolved." msgstr "" #: src/solution_fragment.cc:411 msgid "%BRemove%b the following packages:%n" msgstr "" #: src/solution_fragment.cc:426 msgid "%BInstall%b the following packages:%n" msgstr "" #: src/solution_fragment.cc:444 msgid "%BKeep%b the following packages at their current version:%n" msgstr "" #: src/solution_fragment.cc:468 msgid "%BUpgrade%b the following packages:%n" msgstr "" #: src/solution_fragment.cc:488 msgid "%BDowngrade%b the following packages:%n" msgstr "" #: src/solution_item.cc:97 #, c-format msgid "Remove %F [%s (%s)]" msgstr "" #: src/solution_item.cc:104 #, c-format msgid "Install %F [%s (%s)]" msgstr "" #: src/solution_item.cc:112 #, c-format msgid "Cancel the installation of %F" msgstr "" #: src/solution_item.cc:115 #, c-format msgid "Cancel the removal of %F" msgstr "" #: src/solution_item.cc:118 #, c-format msgid "Keep %F at version %s (%s)" msgstr "" #: src/solution_item.cc:126 #, c-format msgid "Upgrade %F [%s (%s) -> %s (%s)]" msgstr "" #: src/solution_item.cc:135 #, c-format msgid "Downgrade %F [%s (%s) -> %s (%s)]" msgstr "" #: src/solution_item.cc:606 #, c-format msgid "-> Leave the dependency \"%s recommends %s\" unresolved." msgstr "" #: src/solution_screen.cc:164 msgid "The following actions will resolve this dependency:" msgstr "" #: src/solution_screen.cc:284 msgid "Keep the following packages at their current version:" msgstr "" #: src/solution_screen.cc:332 msgid "Leave the following recommendations unresolved:" msgstr "" #: src/solution_screen.cc:512 msgid "No broken packages." msgstr "" #: src/solution_screen.cc:542 #, c-format msgid "open: %d; closed: %d; defer: %d; conflict: %d" msgstr "" #: src/trust.cc:19 src/trust.cc:21 msgid "WARNING" msgstr "" #: src/trust.cc:20 msgid "" "%F: This version of %s is from an %Buntrusted source%b! Installing this " "package could allow a malicious individual to damage or take control of your " "system." msgstr "" #. TRANSLATORS: This string is a confirmation message, which users #. (especially CJK users) should be able to input without input #. methods. Please include nothing but ASCII characters. #: src/ui.cc:209 msgid "Yes, I am aware this is a very bad idea" msgstr "" #: src/ui.cc:236 msgid "Er, there aren't any errors, this shouldn't have happened.." msgstr "" #: src/ui.cc:242 msgid "E:" msgstr "" #: src/ui.cc:244 msgid "W:" msgstr "" #: src/ui.cc:340 msgid "" "WARNING: the package cache is opened in read-only mode! This change and all " "subsequent changes will not be saved unless you stop all other running apt-" "based programs and select \"Become root\" from the Actions menu." msgstr "" #: src/ui.cc:346 msgid "Never display this message again." msgstr "" #: src/ui.cc:392 msgid "" "You may not modify the state of any package while a download is underway." msgstr "" #: src/ui.cc:423 msgid "You already are root!" msgstr "" #: src/ui.cc:438 msgid "Invalid Get-Root-Command; it should start with su: or sudo:" msgstr "" #: src/ui.cc:445 #, c-format msgid "Invalid Get-Root-Command; it should start with su: or sudo:, not %s:" msgstr "" #: src/ui.cc:474 #, c-format msgid "Unable to fork: %s" msgstr "" #: src/ui.cc:578 msgid "" "Subprocess exited with an error -- did you type your password correctly?" msgstr "" #: src/ui.cc:617 msgid "Loading cache" msgstr "" #: src/ui.cc:659 msgid "Really quit Aptitude?" msgstr "" #: src/ui.cc:713 src/ui.cc:2573 msgid "Change the behavior of aptitude" msgstr "" #: src/ui.cc:749 msgid "Really discard your personal settings and reload the defaults?" msgstr "" #: src/ui.cc:794 #, c-format msgid "Using default value for %s string: '%s'" msgstr "" #: src/ui.cc:885 msgid "View available packages and choose actions to perform" msgstr "" #: src/ui.cc:914 msgid "Recommended Packages" msgstr "" #: src/ui.cc:915 msgid "View packages that it is recommended that you install" msgstr "" #: src/ui.cc:916 msgid "Recommendations" msgstr "" #: src/ui.cc:931 src/ui.cc:933 msgid "Packages (flat)" msgstr "" #: src/ui.cc:932 msgid "" "View available packages (flat, no grouping) and choose actions to perform" msgstr "" #: src/ui.cc:959 src/ui.cc:961 msgid "Packages (debtags)" msgstr "" #: src/ui.cc:960 msgid "" "View available packages (debtags grouping) and choose actions to perform" msgstr "" #: src/ui.cc:979 src/ui.cc:981 msgid "Packages (source)" msgstr "" #: src/ui.cc:980 msgid "" "View available packages (source grouping) and choose actions to perform" msgstr "" #: src/ui.cc:1002 #, c-format msgid "Information about %s" msgstr "" #: src/ui.cc:1004 #, c-format msgid "%s info" msgstr "" #: src/ui.cc:1025 #, c-format msgid "Packages depending on %s" msgstr "" #: src/ui.cc:1026 #, c-format msgid "Dependencies of %s" msgstr "" #: src/ui.cc:1029 #, c-format msgid "%s reverse deps" msgstr "" #: src/ui.cc:1030 #, c-format msgid "%s deps" msgstr "" #: src/ui.cc:1048 #, c-format msgid "Available versions of %s" msgstr "" #: src/ui.cc:1050 #, c-format msgid "%s versions" msgstr "" #: src/ui.cc:1056 msgid "" "Aptitude %s%n%nCopyright 2000-2008 Daniel Burrows.%n%naptitude comes with " "%BABSOLUTELY NO WARRANTY%b; for details see 'license' in the Help menu. " "This is free software, and you are welcome to redistribute it under certain " "conditions; see 'license' for details." msgstr "" #: src/ui.cc:1106 src/ui.cc:1108 msgid "License" msgstr "" #: src/ui.cc:1107 src/ui.cc:2665 msgid "View the terms under which you may copy and distribute aptitude" msgstr "" #. TRANSLATORS: You can translate help.txt and set the filename here. #: src/ui.cc:1122 msgid "Localized file|help.txt" msgstr "" #: src/ui.cc:1124 msgid "Encoding of help.txt|UTF-8" msgstr "" #: src/ui.cc:1135 msgid "Online Help" msgstr "" #: src/ui.cc:1136 msgid "View a brief introduction to aptitude" msgstr "" #: src/ui.cc:1137 src/ui.cc:2817 msgid "Help" msgstr "" #. TRANSLATORS: You can translate README and set the filename here. #: src/ui.cc:1146 msgid "Localized file|README" msgstr "" #: src/ui.cc:1147 msgid "Encoding of README|ISO_8859-1" msgstr "" #: src/ui.cc:1158 msgid "User's Manual" msgstr "" #: src/ui.cc:1159 msgid "Read the full user's manual of aptitude" msgstr "" #: src/ui.cc:1160 msgid "Manual" msgstr "" #: src/ui.cc:1167 src/ui.cc:1169 msgid "FAQ" msgstr "" #: src/ui.cc:1168 src/ui.cc:2657 msgid "View a list of frequently asked questions" msgstr "" #: src/ui.cc:1177 src/ui.cc:1179 msgid "News" msgstr "" #: src/ui.cc:1178 #, c-format msgid "View the important changes made in each version of %s" msgstr "" #: src/ui.cc:1185 #, c-format msgid "" "Unable to remove the old temporary directory; you should remove %s by hand." msgstr "" #: src/ui.cc:1190 #, c-format msgid "" "Will not remove %s; you should examine the files in it and remove them by " "hand." msgstr "" #: src/ui.cc:1216 #, c-format msgid "" "It appears that a previous version of aptitude left files behind in %s. " "These files are probably useless and safe to delete.%n%nDo you want to " "remove this directory and all its contents? If you select \"No\", you will " "not see this message again." msgstr "" #: src/ui.cc:1237 msgid "Performing actions..." msgstr "" #: src/ui.cc:1291 msgid "View the progress of the package download" msgstr "" #: src/ui.cc:1292 msgid "Package Download" msgstr "" #: src/ui.cc:1339 msgid "" "%BWARNING%b: untrusted versions of the following packages will be " "installed!%n%nUntrusted packages could %Bcompromise your system's " "security%b. You should only proceed with the installation if you are " "certain that this is what you want to do.%n%n" msgstr "" #: src/ui.cc:1345 msgid " %S*%N %s [version %s]%n" msgstr "" #: src/ui.cc:1351 msgid "Really Continue" msgstr "" #: src/ui.cc:1353 msgid "Abort Installation" msgstr "" #: src/ui.cc:1417 msgid "Preview of package installation" msgstr "" #: src/ui.cc:1418 msgid "View and/or adjust the actions that will be performed" msgstr "" #: src/ui.cc:1480 msgid "Some packages were broken and have been fixed:" msgstr "" #: src/ui.cc:1488 msgid "No solution to these dependency problems exists!" msgstr "" #: src/ui.cc:1494 #, c-format msgid "" "Ran out of time while trying to resolve dependencies (press \"%s\" to try " "harder)" msgstr "" #: src/ui.cc:1540 msgid "" "Installing/removing packages requires administrative privileges, which you " "currently do not have. Would you like to change to the root account?" msgstr "" #: src/ui.cc:1543 src/ui.cc:1782 src/ui.cc:1843 src/ui.cc:1938 msgid "Become root" msgstr "" #: src/ui.cc:1545 src/ui.cc:1784 src/ui.cc:1845 src/ui.cc:1940 msgid "Don't become root" msgstr "" #: src/ui.cc:1666 msgid "No packages are scheduled to be installed, removed, or upgraded." msgstr "" #: src/ui.cc:1672 msgid "" "No packages will be installed, removed or upgraded. Some packages could be " "upgraded, but you have not chosen to upgrade them. Type \"U\" to prepare an " "upgrade." msgstr "" #: src/ui.cc:1752 msgid "Updating package lists" msgstr "" #: src/ui.cc:1753 msgid "View the progress of the package list update" msgstr "" #: src/ui.cc:1754 msgid "List Update" msgstr "" #: src/ui.cc:1779 msgid "" "Updating the package lists requires administrative privileges, which you " "currently do not have. Would you like to change to the root account?" msgstr "" #: src/ui.cc:1794 src/ui.cc:2408 msgid "Waste time trying to find mines" msgstr "" #: src/ui.cc:1801 src/ui.cc:1889 msgid "Cleaning while a download is in progress is not allowed" msgstr "" #: src/ui.cc:1816 msgid "Deleting downloaded files" msgstr "" #: src/ui.cc:1830 msgid "Downloaded package files have been deleted" msgstr "" #: src/ui.cc:1840 msgid "" "Cleaning the package cache requires administrative privileges, which you " "currently do not have. Would you like to change to the root account?" msgstr "" #: src/ui.cc:1886 msgid "The apt cache file is not available; cannot auto-clean." msgstr "" #: src/ui.cc:1924 #, c-format msgid "" "Obsolete downloaded package files have been deleted, freeing %sB of disk " "space." msgstr "" #: src/ui.cc:1935 msgid "" "Deleting obsolete files requires administrative privileges, which you " "currently do not have. Would you like to change to the root account?" msgstr "" #: src/ui.cc:2037 msgid "No more solutions." msgstr "" #: src/ui.cc:2245 msgid "Unable to find a solution to apply." msgstr "" #: src/ui.cc:2251 msgid "Ran out of time while trying to find a solution." msgstr "" #: src/ui.cc:2311 src/ui.cc:2313 msgid "Resolve Dependencies" msgstr "" #: src/ui.cc:2312 msgid "Search for solutions to unsatisfied dependencies" msgstr "" #: src/ui.cc:2324 #, c-format msgid "Unable to open %ls" msgstr "" #: src/ui.cc:2330 msgid "Error while dumping resolver state" msgstr "" #: src/ui.cc:2370 msgid "^Install/remove packages" msgstr "" #: src/ui.cc:2373 msgid "^Update package list" msgstr "" #: src/ui.cc:2378 msgid "Mark Up^gradable" msgstr "" #: src/ui.cc:2383 msgid "^Forget new packages" msgstr "" #: src/ui.cc:2387 msgid "Canc^el pending actions" msgstr "" #: src/ui.cc:2391 msgid "^Clean package cache" msgstr "" #: src/ui.cc:2395 msgid "Clean ^obsolete files" msgstr "" #: src/ui.cc:2402 msgid "^Reload package cache" msgstr "" #: src/ui.cc:2407 msgid "^Play Minesweeper" msgstr "" #: src/ui.cc:2412 msgid "^Become root" msgstr "" #: src/ui.cc:2415 msgid "^Quit" msgstr "" #: src/ui.cc:2422 src/ui.cc:2811 msgid "Undo" msgstr "" #: src/ui.cc:2431 msgid "^Install" msgstr "" #: src/ui.cc:2432 msgid "Flag the currently selected package for installation or upgrade" msgstr "" #: src/ui.cc:2435 msgid "R^einstall" msgstr "" #: src/ui.cc:2436 msgid "Flag the currently selected package for reinstallation" msgstr "" #: src/ui.cc:2439 msgid "^Remove" msgstr "" #: src/ui.cc:2440 msgid "Flag the currently selected package for removal" msgstr "" #: src/ui.cc:2443 msgid "^Purge" msgstr "" #: src/ui.cc:2444 msgid "" "Flag the currently selected package and its configuration files for removal" msgstr "" #: src/ui.cc:2447 msgid "^Keep" msgstr "" #: src/ui.cc:2448 msgid "Cancel any action on the selected package" msgstr "" #: src/ui.cc:2451 msgid "^Hold" msgstr "" #: src/ui.cc:2452 msgid "" "Cancel any action on the selected package, and protect it from future " "upgrades" msgstr "" #: src/ui.cc:2455 msgid "Mark ^Auto" msgstr "" #: src/ui.cc:2456 msgid "" "Mark the selected package as having been automatically installed; it will " "automatically be removed if no other packages depend on it" msgstr "" #: src/ui.cc:2459 msgid "Mark ^Manual" msgstr "" #: src/ui.cc:2460 msgid "" "Mark the selected package as having been manually installed; it will not be " "removed unless you manually remove it" msgstr "" #: src/ui.cc:2463 msgid "^Forbid Version" msgstr "" #: src/ui.cc:2464 msgid "" "Forbid the candidate version of the selected package from being installed; " "newer versions of the package will be installed as usual" msgstr "" #: src/ui.cc:2468 msgid "I^nformation" msgstr "" #: src/ui.cc:2469 msgid "Display more information about the selected package" msgstr "" #: src/ui.cc:2472 msgid "C^ycle Package Information" msgstr "" #: src/ui.cc:2473 msgid "" "Cycle through the modes of the package information area: it can show the " "package's long description, a summary of its dependency status, or an " "analysis of why the package is required." msgstr "" #: src/ui.cc:2476 msgid "^Changelog" msgstr "" #: src/ui.cc:2477 msgid "Display the Debian changelog of the selected package" msgstr "" #: src/ui.cc:2484 msgid "^Examine Solution" msgstr "" #: src/ui.cc:2485 msgid "Examine the currently selected solution to the dependency problems." msgstr "" #: src/ui.cc:2488 msgid "Apply ^Solution" msgstr "" #: src/ui.cc:2489 msgid "Perform the actions contained in the currently selected solution." msgstr "" #: src/ui.cc:2492 msgid "^Next Solution" msgstr "" #: src/ui.cc:2493 msgid "Select the next solution to the dependency problems." msgstr "" #: src/ui.cc:2496 msgid "^Previous Solution" msgstr "" #: src/ui.cc:2497 msgid "Select the previous solution to the dependency problems." msgstr "" #: src/ui.cc:2500 msgid "^First Solution" msgstr "" #: src/ui.cc:2501 msgid "Select the first solution to the dependency problems." msgstr "" #: src/ui.cc:2504 msgid "^Last Solution" msgstr "" #: src/ui.cc:2505 msgid "" "Select the last solution to the dependency problems that has been generated " "so far." msgstr "" #: src/ui.cc:2511 msgid "Toggle ^Rejected" msgstr "" #: src/ui.cc:2512 msgid "Toggle whether the currently selected action is rejected." msgstr "" #: src/ui.cc:2516 msgid "Toggle ^Approved" msgstr "" #: src/ui.cc:2517 msgid "Toggle whether the currently selected action is approved." msgstr "" #: src/ui.cc:2521 msgid "^View Target" msgstr "" #: src/ui.cc:2522 msgid "View the package which will be affected by the selected action" msgstr "" #: src/ui.cc:2528 msgid "Reject Breaking ^Holds" msgstr "" #: src/ui.cc:2530 msgid "" "Reject all actions that would change the state of held packages or install " "forbidden versions" msgstr "" #: src/ui.cc:2538 msgid "^Find" msgstr "" #: src/ui.cc:2539 msgid "Search forwards" msgstr "" #: src/ui.cc:2542 msgid "^Find Backwards" msgstr "" #: src/ui.cc:2543 msgid "Search backwards" msgstr "" #: src/ui.cc:2546 msgid "Find ^Again" msgstr "" #: src/ui.cc:2547 msgid "Repeat the last search" msgstr "" #: src/ui.cc:2550 msgid "Find Again ^Backwards" msgstr "" #: src/ui.cc:2551 msgid "Repeat the last search in the opposite direction" msgstr "" #: src/ui.cc:2555 msgid "^Limit Display" msgstr "" #: src/ui.cc:2556 msgid "Apply a filter to the package list" msgstr "" #: src/ui.cc:2559 msgid "^Un-Limit Display" msgstr "" #: src/ui.cc:2560 msgid "Remove the filter from the package list" msgstr "" #: src/ui.cc:2564 msgid "Find ^Broken" msgstr "" #: src/ui.cc:2565 msgid "Find the next package with unsatisfied dependencies" msgstr "" #: src/ui.cc:2572 msgid "^Preferences" msgstr "" #: src/ui.cc:2577 msgid "^UI options" msgstr "" #: src/ui.cc:2578 msgid "Change the settings which affect the user interface" msgstr "" #: src/ui.cc:2581 msgid "^Dependency handling" msgstr "" #: src/ui.cc:2582 msgid "Change the settings which affect how package dependencies are handled" msgstr "" #: src/ui.cc:2585 msgid "^Miscellaneous" msgstr "" #: src/ui.cc:2586 msgid "Change miscellaneous program settings" msgstr "" #: src/ui.cc:2592 msgid "^Revert options" msgstr "" #: src/ui.cc:2593 msgid "Reset all settings to the system defaults" msgstr "" #: src/ui.cc:2604 msgid "^Next" msgstr "" #: src/ui.cc:2605 msgid "View next display" msgstr "" #: src/ui.cc:2608 msgid "^Prev" msgstr "" #: src/ui.cc:2609 msgid "View previous display" msgstr "" #: src/ui.cc:2612 msgid "^Close" msgstr "" #: src/ui.cc:2613 msgid "Close this display" msgstr "" #: src/ui.cc:2618 msgid "New Package ^View" msgstr "" #: src/ui.cc:2619 msgid "Create a new default package view" msgstr "" #: src/ui.cc:2622 msgid "Audit ^Recommendations" msgstr "" #: src/ui.cc:2623 msgid "" "View packages which it is recommended that you install, but which are not " "currently installed." msgstr "" #: src/ui.cc:2626 msgid "New ^Flat Package List" msgstr "" #: src/ui.cc:2627 msgid "View all the packages on the system in a single uncategorized list" msgstr "" #: src/ui.cc:2630 msgid "New ^Debtags Browser" msgstr "" #: src/ui.cc:2632 msgid "Browse packages using Debtags data" msgstr "" #: src/ui.cc:2635 msgid "New ^Source Package View" msgstr "" #: src/ui.cc:2637 msgid "Create a new package view, grouped by source package" msgstr "" #: src/ui.cc:2645 msgid "^About" msgstr "" #: src/ui.cc:2646 msgid "View information about this program" msgstr "" #: src/ui.cc:2649 msgid "^Help" msgstr "" #: src/ui.cc:2650 msgid "View the on-line help" msgstr "" #: src/ui.cc:2652 msgid "User's ^Manual" msgstr "" #: src/ui.cc:2653 msgid "View the detailed program manual" msgstr "" #: src/ui.cc:2656 msgid "^FAQ" msgstr "" #: src/ui.cc:2660 msgid "^News" msgstr "" #: src/ui.cc:2661 msgid "View the important changes made in each version of " msgstr "" #: src/ui.cc:2664 msgid "^License" msgstr "" #: src/ui.cc:2810 msgid "Actions" msgstr "" #: src/ui.cc:2814 msgid "Search" msgstr "" #: src/ui.cc:2815 msgid "Options" msgstr "" #: src/ui.cc:2816 msgid "Views" msgstr "" #: src/ui.cc:2882 #, c-format msgid "" "%ls: Menu %ls: Help %ls: Quit %ls: Update %ls: " "Preview/Download/Install/Remove Pkgs" msgstr "" #: src/ui.cc:3252 msgid "yes_key" msgstr "" #: src/ui.cc:3253 msgid "no_key" msgstr "" #: src/view_changelog.cc:273 #, c-format msgid "%s changes" msgstr "" #: src/view_changelog.cc:274 msgid "View the list of changes made to this Debian package." msgstr "" #: src/view_changelog.cc:343 #, c-format msgid "Preparing to download the changelog of %s" msgstr "" #: src/view_changelog.cc:371 #, c-format msgid "Failed to download the changelog of %s: %s" msgstr "" #: src/view_changelog.cc:382 #, c-format msgid "Downloading the changelog of %s" msgstr "" #: src/view_changelog.cc:415 msgid "You can only view changelogs of official Debian packages." msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/software-properties.po0000644000000000000000000005246312734303741022021 0ustar # German, Low translation for software-properties # Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007 # This file is distributed under the same license as the software-properties package. # FIRST AUTHOR , 2007. # msgid "" msgstr "" "Project-Id-Version: software-properties\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-06-24 15:12+0000\n" "PO-Revision-Date: 2014-03-07 11:31+0000\n" "Last-Translator: Launchpad Translations Administrators \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2016-06-27 18:12+0000\n" "X-Generator: Launchpad (build 18115)\n" #: ../data/com.ubuntu.softwareproperties.policy.in.h:1 msgid "Write Configuration" msgstr "" #: ../data/com.ubuntu.softwareproperties.policy.in.h:2 msgid "To change software repository settings, you need to authenticate." msgstr "" #: ../data/software-properties-gtk.desktop.in.h:1 #: ../data/gtkbuilder/main.ui.h:14 msgid "Software & Updates" msgstr "" #: ../data/software-properties-gtk.desktop.in.h:2 #: ../data/software-properties-kde.desktop.in.h:2 msgid "Configure the sources for installable software and updates" msgstr "Installationsquellen für Pakete und Updates bearbeiten" #: ../data/software-properties-gtk.desktop.in.h:3 msgid "Drivers;Repositories;Repository;PPA;" msgstr "" #: ../data/software-properties-kde.desktop.in.h:1 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:671 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:690 msgid "Software Sources" msgstr "Paketquellen" #: ../software-properties-gtk:97 msgid "" "The --enable-component/-e command-line switch has been deprecated. Instead " "of 'software-properties-gtk -e multiverse' you can use \n" "'add-apt-repository multiverse'" msgstr "" #: ../software-properties-kde:75 msgid "Print some debug information to the command line" msgstr "" #: ../software-properties-kde:78 ../add-apt-repository:59 msgid "Print a lot of debug information to the command line" msgstr "" #: ../software-properties-kde:81 msgid "" "No update on repository change (useful if called from an external program)" msgstr "" #: ../software-properties-kde:84 msgid "Enable the specified component of the distro's repositories" msgstr "" #: ../software-properties-kde:88 msgid "Enable PPA with the given name" msgstr "" #: ../software-properties-kde:92 msgid "URL of keyserver" msgstr "" #: ../software-properties-kde:95 msgid "Win ID to act as a dialogue for" msgstr "" #: ../software-properties-kde:98 msgid "data directory for UI files" msgstr "" #: ../add-apt-repository:62 msgid "remove repository from sources.list.d directory" msgstr "" #: ../add-apt-repository:65 #, c-format msgid "URL of keyserver. Default: %default" msgstr "" #: ../add-apt-repository:68 msgid "Allow downloading of the source packages from the repository" msgstr "" #: ../add-apt-repository:71 msgid "Assume yes to all queries" msgstr "" #: ../add-apt-repository:74 msgid "Update package cache after adding" msgstr "" #: ../add-apt-repository:78 msgid "Error: must run as root" msgstr "" #: ../add-apt-repository:82 msgid "Error: need a repository as argument" msgstr "" #: ../add-apt-repository:85 msgid "Error: need a single repository as argument" msgstr "" #: ../add-apt-repository:105 #, c-format msgid "'%s' distribution component disabled for all sources." msgstr "" #: ../add-apt-repository:107 #, c-format msgid "'%s' distribution component is already disabled for all sources." msgstr "" #: ../add-apt-repository:112 #, c-format msgid "'%s' distribution component enabled for all sources." msgstr "" #: ../add-apt-repository:114 #, c-format msgid "'%s' distribution component is already enabled for all sources." msgstr "" #: ../add-apt-repository:136 #, c-format msgid " More info: %s" msgstr "" #: ../add-apt-repository:140 msgid "Press [ENTER] to continue or ctrl-c to cancel removing it" msgstr "" #: ../add-apt-repository:142 msgid "Press [ENTER] to continue or ctrl-c to cancel adding it" msgstr "" #: ../add-apt-repository:160 ../add-apt-repository:164 #, c-format msgid "Error: '%s' doesn't exist in a sourcelist file" msgstr "" #: ../add-apt-repository:169 #, c-format msgid "Error: '%s' invalid" msgstr "" #: ../softwareproperties/distro.py:28 msgid "" "To improve the user experience of Ubuntu please take part in the " "popularity contest. If you do so the list of installed software and how " "often it was used will be collected and sent anonymously to the Ubuntu " "project on a weekly basis.\n" "\n" "The results are used to improve the support for popular applications and to " "rank applications in the search results." msgstr "" #: ../softwareproperties/distro.py:37 msgid "" "To improve the user experiece of Debian please take part in the " "popularity contest. If you do so the list of installed software and how " "often it was used will be collected and sent anonymously to the Debian " "project.\n" "\n" "The results are used to optimise the layout of the installation CDs." msgstr "" #: ../softwareproperties/distro.py:44 msgid "" "Submit the list of installed software and how often it is is used to the " "distribution project." msgstr "" #: ../softwareproperties/kde/DialogMirror.py:63 msgid "Mirror" msgstr "" #: ../softwareproperties/kde/DialogMirror.py:184 #: ../softwareproperties/kde/DialogMirror.py:185 #: ../softwareproperties/kde/DialogMirror.py:218 msgid "Testing Mirrors" msgstr "" #: ../softwareproperties/kde/DialogMirror.py:184 #: ../softwareproperties/kde/DialogMirror.py:187 msgid "Cancel" msgstr "Löschen" #: ../softwareproperties/kde/DialogMirror.py:219 #: ../softwareproperties/gtk/DialogMirror.py:335 msgid "No suitable download server was found" msgstr "" #: ../softwareproperties/kde/DialogMirror.py:220 #: ../softwareproperties/gtk/DialogMirror.py:336 msgid "Please check your Internet connection." msgstr "Bitte überprüfe deine Internetverbindung." #: ../softwareproperties/kde/DialogMirror.py:235 #: ../softwareproperties/gtk/DialogMirror.py:351 msgid "Canceling..." msgstr "Lösche..." #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:162 #: ../data/gtkbuilder/main.ui.h:9 msgid "Daily" msgstr "Täglich" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:163 #: ../data/gtkbuilder/main.ui.h:10 msgid "Every two days" msgstr "Alle 2 Tage" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:164 #: ../data/gtkbuilder/main.ui.h:11 msgid "Weekly" msgstr "Wöchentlich" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:165 #: ../data/gtkbuilder/main.ui.h:12 msgid "Every two weeks" msgstr "Jede 2. Woche" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:172 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:244 #, python-format msgid "Every %s days" msgstr "Alle %s Tage" #. TRANS: %s stands for the distribution name e.g. Debian or Ubuntu #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:214 #, python-format msgid "%s updates" msgstr "%s Aktualisierungen" #. TRANS: %s stands for the distribution name e.g. Debian or Ubuntu #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:218 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:304 #, python-format msgid "%s Software" msgstr "%s Software" #. TRANSLATORS: Label for the components in the Internet section #. first %s is the description of the component #. second %s is the code name of the comp, eg main, universe #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:237 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:317 #, python-format msgid "%s (%s)" msgstr "%s (%s)" #. add a separator and the option to choose another mirror from the list #. #FIXME server_store.append(["sep", None, True]) #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:300 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:447 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:540 msgid "Other..." msgstr "Andere..." #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:668 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:963 msgid "Import key" msgstr "Schlüssel importieren" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:671 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:977 msgid "Error importing selected file" msgstr "Es trat ein Fehler beim importieren der ausgewählten Datei auf" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:672 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:978 msgid "The selected file may not be a GPG key file or it might be corrupt." msgstr "" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:685 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:994 msgid "Error removing the key" msgstr "Fehler beim entfernen des Schlüssels" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:686 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:995 msgid "" "The key you selected could not be removed. Please report this as a bug." msgstr "" "Der ausgewählte Schlüssel konnte nicht entfernt werden. Bitte berichten Sie " "diesen Fehler." #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:703 msgid "Reload" msgstr "Aktualisieren" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:705 msgid "Your local copy of the software catalog is out of date." msgstr "" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:706 msgid "A new copy will be downloaded." msgstr "" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:730 msgid "CD Error" msgstr "CD Fehler" #: ../softwareproperties/kde/SoftwarePropertiesKDE.py:731 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:829 msgid "Error scanning the CD" msgstr "" #: ../softwareproperties/kde/CdromProgress.py:54 msgid "CD Name" msgstr "" #: ../softwareproperties/kde/CdromProgress.py:54 #: ../softwareproperties/gtk/CdromProgress.py:59 msgid "Please enter a name for the disc" msgstr "Bitte den Name der CD eingeben" #: ../softwareproperties/kde/CdromProgress.py:58 msgid "Insert Disk" msgstr "CD einfügen" #: ../softwareproperties/kde/CdromProgress.py:58 #: ../softwareproperties/gtk/CdromProgress.py:75 msgid "Please insert a disk in the drive:" msgstr "" #. L10N: the example is of the format: deb http://ftp.debian.org sarge main #: ../softwareproperties/kde/DialogAdd.py:55 msgid "Enter the complete APT line of the repository that you want to add." msgstr "" #: ../softwareproperties/kde/DialogAdd.py:57 #, python-format msgid "" "Include the type, location and components of the repository. Example: %s" msgstr "" #: ../softwareproperties/kde/DialogEdit.py:43 #: ../data/gtkbuilder/dialog-edit-source.ui.h:1 msgid "Binary" msgstr "" #: ../softwareproperties/kde/DialogEdit.py:44 ../data/gtkbuilder/main.ui.h:15 msgid "Source code" msgstr "Quellcode" #: ../softwareproperties/SoftwareProperties.py:502 #: ../softwareproperties/SoftwareProperties.py:509 msgid "(Source Code)" msgstr "(Quellcode)" #: ../softwareproperties/SoftwareProperties.py:515 msgid "Source Code" msgstr "Quellcode" #: ../softwareproperties/gtk/DialogMirror.py:248 msgid "New mirror" msgstr "" #: ../softwareproperties/gtk/DialogMirror.py:324 #, python-format msgid "Completed %s of %s tests" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:681 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:700 msgid "Active" msgstr "Aktiv" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:739 msgid "Key" msgstr "Schlüssel" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:756 msgid "_Add key from paste data" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:769 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:780 msgid "Error importing key" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:770 #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:781 msgid "The selected data may not be a GPG key file or it might be corrupt." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:830 msgid "Could not find a suitable CD." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1040 msgid "Applying changes..." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1121 #: ../data/gtkbuilder/main.ui.h:42 msgid "Re_vert" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1123 msgid "_Apply Changes" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1125 msgid "_Cancel" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1127 msgid "_Restart..." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1142 msgid "Searching for available drivers..." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1172 msgid "An error occurred while searching for drivers." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1246 msgid "This device is using the recommended driver." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1247 msgid "This device is using an alternative driver." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1248 msgid "This device is using a manually-installed driver." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1249 msgid "This device is not working." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1258 msgid "Continue using a manually installed driver" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1285 msgid "Using {} from {}" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1287 msgid "Using {}" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1294 msgid "open source" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1296 msgid "proprietary" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1299 #, python-brace-format msgid "{base_description} ({licence}, tested)" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1301 #, python-brace-format msgid "{base_description} ({licence})" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1321 msgid "Do not use the device" msgstr "" #. No drivers found. #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1341 msgid "No additional drivers available." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1359 msgid "Unknown" msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1408 msgid "You need to restart the computer to complete the driver changes." msgstr "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1422 #, python-format msgid "%(count)d proprietary driver in use." msgid_plural "%(count)d proprietary drivers in use." msgstr[0] "" msgstr[1] "" #: ../softwareproperties/gtk/SoftwarePropertiesGtk.py:1427 #: ../data/gtkbuilder/main.ui.h:37 msgid "No proprietary drivers are in use." msgstr "" #: ../softwareproperties/gtk/DialogAddSourcesList.py:43 msgid "Add Software Channels" msgstr "Füge Paketquelle hinzu" #: ../softwareproperties/gtk/DialogAddSourcesList.py:84 msgid "Install software additionally or only from this source?" msgid_plural "Install software additionally or only from these sources?" msgstr[0] "" msgstr[1] "" #: ../softwareproperties/gtk/DialogAddSourcesList.py:89 msgid "" "You can either add the following sources or replace your current sources by " "them. Only install software from trusted sources." msgstr "" #: ../softwareproperties/gtk/DialogAddSourcesList.py:104 msgid "There are no sources to install software from" msgstr "" #: ../softwareproperties/gtk/DialogAddSourcesList.py:105 #, python-format msgid "The file '%s' does not contain any valid software sources." msgstr "" #. L10N: the example is of the format: deb http://ftp.debian.org sarge main #: ../softwareproperties/gtk/DialogAdd.py:62 #, python-format msgid "" "The APT line includes the type, location and components of a repository, for " "example '%s'." msgstr "" #. some known keys #: ../softwareproperties/AptAuth.py:39 msgid "Ubuntu Archive Automatic Signing Key " msgstr "" #: ../softwareproperties/AptAuth.py:40 msgid "Ubuntu CD Image Automatic Signing Key " msgstr "" #: ../softwareproperties/AptAuth.py:41 msgid "Ubuntu Archive Automatic Signing Key (2012) " msgstr "" #: ../softwareproperties/AptAuth.py:42 msgid "Ubuntu CD Image Automatic Signing Key (2012) " msgstr "" #: ../softwareproperties/AptAuth.py:43 msgid "Ubuntu Extras Archive Automatic Signing Key " msgstr "" #: ../data/gtkbuilder/dialog-edit-source.ui.h:2 msgid "Source" msgstr "" #: ../data/gtkbuilder/dialog-edit-source.ui.h:3 msgid "Edit Source" msgstr "" #: ../data/gtkbuilder/dialog-edit-source.ui.h:4 msgid "Type:" msgstr "" #: ../data/gtkbuilder/dialog-edit-source.ui.h:5 msgid "URI:" msgstr "" #: ../data/gtkbuilder/dialog-edit-source.ui.h:6 msgid "Distribution:" msgstr "" #: ../data/gtkbuilder/dialog-edit-source.ui.h:7 msgid "Components:" msgstr "" #: ../data/gtkbuilder/dialog-edit-source.ui.h:8 msgid "Comment:" msgstr "" #: ../data/gtkbuilder/dialog-add-sources-list.ui.h:1 msgid "_Replace" msgstr "" #: ../data/gtkbuilder/dialog-cdrom-progress.ui.h:1 msgid "Scanning CD-ROM" msgstr "" #: ../data/gtkbuilder/main.ui.h:1 msgid "Display immediately" msgstr "" #: ../data/gtkbuilder/main.ui.h:2 msgid "Display weekly" msgstr "" #: ../data/gtkbuilder/main.ui.h:3 msgid "Display every two weeks" msgstr "" #: ../data/gtkbuilder/main.ui.h:4 msgid "For any new version" msgstr "" #: ../data/gtkbuilder/main.ui.h:5 msgid "For long-term support versions" msgstr "" #: ../data/gtkbuilder/main.ui.h:6 msgid "Never" msgstr "" #: ../data/gtkbuilder/main.ui.h:7 msgid "Download automatically" msgstr "" #: ../data/gtkbuilder/main.ui.h:8 msgid "Download and install automatically" msgstr "" #: ../data/gtkbuilder/main.ui.h:13 msgid "To install from a CD-ROM or DVD, insert the medium into the drive." msgstr "" #: ../data/gtkbuilder/main.ui.h:16 msgid "Download from:" msgstr "" #: ../data/gtkbuilder/main.ui.h:17 msgid "Downloadable from the Internet" msgstr "" #: ../data/gtkbuilder/main.ui.h:18 msgid "Installable from CD-ROM/DVD" msgstr "" #: ../data/gtkbuilder/main.ui.h:19 msgid "Add..." msgstr "" #: ../data/gtkbuilder/main.ui.h:20 msgid "Edit..." msgstr "" #: ../data/gtkbuilder/main.ui.h:21 msgid "Add Volume..." msgstr "" #: ../data/gtkbuilder/main.ui.h:22 msgid "Other Software" msgstr "" #: ../data/gtkbuilder/main.ui.h:23 msgid "Install updates from:" msgstr "" #: ../data/gtkbuilder/main.ui.h:24 msgid "Automatically check for updates:" msgstr "" #: ../data/gtkbuilder/main.ui.h:25 msgid "When there are security updates:" msgstr "" #: ../data/gtkbuilder/main.ui.h:26 msgid "When there are other updates:" msgstr "" #: ../data/gtkbuilder/main.ui.h:27 msgid "Notify me of a new Ubuntu version:" msgstr "" #: ../data/gtkbuilder/main.ui.h:28 msgid "Updates" msgstr "" #: ../data/gtkbuilder/main.ui.h:29 msgid "Trusted software providers" msgstr "" #: ../data/gtkbuilder/main.ui.h:30 msgid " " msgstr " " #: ../data/gtkbuilder/main.ui.h:31 msgid "" "Keys are used to authenticate the correct source of software and so protect " "your computer from malicious software" msgstr "" #: ../data/gtkbuilder/main.ui.h:32 msgid "_Import Key File..." msgstr "" #: ../data/gtkbuilder/main.ui.h:33 msgid "Import the public key from a trusted software provider" msgstr "" #: ../data/gtkbuilder/main.ui.h:34 msgid "Restore _Defaults" msgstr "" #: ../data/gtkbuilder/main.ui.h:35 msgid "Restore the default keys of your distribution" msgstr "" #: ../data/gtkbuilder/main.ui.h:36 msgid "Authentication" msgstr "" #: ../data/gtkbuilder/main.ui.h:38 msgid "" "A proprietary driver has private code that Ubuntu developers can't " "review or improve. Security and other updates are dependent on the driver " "vendor." msgstr "" #: ../data/gtkbuilder/main.ui.h:39 msgid "Additional Drivers" msgstr "" #: ../data/gtkbuilder/main.ui.h:40 msgid "" "Proposed updates are only for testing updates and providing development " "feedback. Enabling this may introduce instability." msgstr "" #: ../data/gtkbuilder/main.ui.h:41 msgid "Developer Options" msgstr "" #: ../data/gtkbuilder/dialog-cache-outofdate.ui.h:1 #: ../data/gtkbuilder/dialog-mirror.ui.h:6 msgid " " msgstr "" #: ../data/gtkbuilder/dialog-cache-outofdate.ui.h:2 msgid "" "The information about available software is out-of-date\n" "\n" "To install software and updates from newly added or changed sources, you " "have to reload the information about available software.\n" "\n" "You need a working internet connection to continue." msgstr "" #: ../data/gtkbuilder/dialog-cache-outofdate.ui.h:7 msgid "_Reload" msgstr "" #: ../data/gtkbuilder/dialog-mirror.ui.h:1 msgid "Choose a Download Server" msgstr "" #: ../data/gtkbuilder/dialog-mirror.ui.h:2 msgid "Protocol:" msgstr "" #: ../data/gtkbuilder/dialog-mirror.ui.h:3 msgid "_Select Best Server" msgstr "" #: ../data/gtkbuilder/dialog-mirror.ui.h:4 msgid "Performs a connection test to find the best mirror for your location" msgstr "" #: ../data/gtkbuilder/dialog-mirror.ui.h:5 msgid "Choose _Server" msgstr "" #: ../data/gtkbuilder/dialog-mirror.ui.h:7 msgid "" "Testing download servers\n" "\n" "A series of tests will be performed to find the best mirror for your " "location." msgstr "" #: ../data/gtkbuilder/dialog-add.ui.h:1 msgid "" "Enter the complete APT line of the repository that you want to add " "as source" msgstr "" #: ../data/gtkbuilder/dialog-add.ui.h:2 msgid "APT line:" msgstr "" #: ../data/gtkbuilder/dialog-add.ui.h:3 msgid "_Add Source" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/hunspell.po0000644000000000000000000002436512734303741017627 0ustar # Low German translation for hunspell # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the hunspell package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: hunspell\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2014-06-02 13:54+0200\n" "PO-Revision-Date: 2010-06-14 20:08+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Low German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 17:43+0000\n" "X-Generator: Launchpad (build 18115)\n" #: src/tools/hunspell.cxx:212 src/tools/hunspell.cxx:320 #, c-format msgid "error - iconv_open: %s -> %s\n" msgstr "" #: src/tools/hunspell.cxx:255 src/tools/hunspell.cxx:278 #, c-format msgid "error - iconv_open: UTF-8 -> %s\n" msgstr "" #: src/tools/hunspell.cxx:571 src/tools/hunspell.cxx:1391 #: src/tools/hunspell.cxx:1410 src/tools/hunspell.cxx:1420 msgid "Can't open inputfile" msgstr "" #: src/tools/hunspell.cxx:624 src/tools/hunspell.cxx:1157 #: src/tools/hunspell.cxx:1290 #, c-format msgid "error - missing HOME variable\n" msgstr "" #: src/tools/hunspell.cxx:708 #, c-format msgid "Line %d: %s -> " msgstr "" #: src/tools/hunspell.cxx:958 msgid "FORBIDDEN!" msgstr "NICH TOLATEN!" #: src/tools/hunspell.cxx:959 msgid "Spelling mistake?" msgstr "" #: src/tools/hunspell.cxx:961 #, c-format msgid "" "\t%s\t\tFile: %s\n" "\n" msgstr "" #: src/tools/hunspell.cxx:1015 msgid "" "\n" "[SPACE] R)epl A)ccept I)nsert U)ncap S)tem Q)uit e(X)it or ? for help\n" msgstr "" #: src/tools/hunspell.cxx:1084 msgid "" "Whenever a word is found that is not in the dictionary\n" "it is printed on the first line of the screen. If the dictionary\n" "contains any similar words, they are listed with a number\n" "next to each one. You have the option of replacing the word\n" "completely, or choosing one of the suggested words.\n" msgstr "" #: src/tools/hunspell.cxx:1089 msgid "" "\n" "Commands are:\n" "\n" msgstr "" "\n" "Orders sünd:\n" "\n" #: src/tools/hunspell.cxx:1090 msgid "R\tReplace the misspelled word completely.\n" msgstr "" #: src/tools/hunspell.cxx:1091 msgid "Space\tAccept the word this time only.\n" msgstr "" #: src/tools/hunspell.cxx:1092 msgid "A\tAccept the word for the rest of this session.\n" msgstr "" #: src/tools/hunspell.cxx:1093 msgid "I\tAccept the word, and put it in your private dictionary.\n" msgstr "" #: src/tools/hunspell.cxx:1094 msgid "U\tAccept and add lowercase version to private dictionary.\n" msgstr "" #: src/tools/hunspell.cxx:1096 msgid "" "S\tAsk a stem and a model word and store them in the private dictionary.\n" "\tThe stem will be accepted also with the affixes of the model word.\n" msgstr "" #: src/tools/hunspell.cxx:1099 msgid "0-n\tReplace with one of the suggested words.\n" msgstr "" #: src/tools/hunspell.cxx:1100 msgid "" "X\tWrite the rest of this file, ignoring misspellings, and start next file.\n" msgstr "" #: src/tools/hunspell.cxx:1101 msgid "Q\tQuit immediately. Asks for confirmation. Leaves file unchanged.\n" msgstr "" #: src/tools/hunspell.cxx:1102 msgid "^Z\tSuspend program. Restart with fg command.\n" msgstr "" #: src/tools/hunspell.cxx:1103 msgid "?\tShow this help screen.\n" msgstr "" #: src/tools/hunspell.cxx:1104 msgid "" "\n" "-- Type space to continue -- \n" msgstr "" #. TRANSLATORS: translate this letter according to the shortcut letter used #. previously in the translation of "R)epl" before #: src/tools/hunspell.cxx:1114 msgid "r" msgstr "" #: src/tools/hunspell.cxx:1126 msgid "Replace with: " msgstr "" #. TRANSLATORS: translate these letters according to the shortcut letter used #. previously in the translation of "U)ncap" and I)nsert before #. TRANSLATORS: translate this letter according to the shortcut letter used #. previously in the translation of "U)ncap" and I)nsert before #: src/tools/hunspell.cxx:1147 src/tools/hunspell.cxx:1179 msgid "u" msgstr "" #: src/tools/hunspell.cxx:1148 src/tools/hunspell.cxx:1179 msgid "i" msgstr "" #: src/tools/hunspell.cxx:1173 src/tools/hunspell.cxx:1306 #, c-format msgid "Cannot update personal dictionary." msgstr "" #: src/tools/hunspell.cxx:1179 msgid "a" msgstr "" #. TRANSLATORS: translate this letter according to the shortcut letter used #. previously in the translation of "S)tem" before #: src/tools/hunspell.cxx:1186 msgid "s" msgstr "" #: src/tools/hunspell.cxx:1220 msgid "New word (stem): " msgstr "" #: src/tools/hunspell.cxx:1248 msgid "Model word (a similar dictionary word): " msgstr "" #: src/tools/hunspell.cxx:1312 msgid "Model word must be in the dictionary. Press any key!" msgstr "" #. TRANSLATORS: translate this letter according to the shortcut letter used #. previously in the translation of "e(X)it" before #: src/tools/hunspell.cxx:1321 msgid "x" msgstr "" #. TRANSLATORS: translate this letter according to the shortcut letter used #. previously in the translation of "Q)uit" before #: src/tools/hunspell.cxx:1326 msgid "q" msgstr "" #: src/tools/hunspell.cxx:1328 msgid "Are you sure you want to throw away your changes? " msgstr "" #. TRANSLATORS: translate this letter according to the shortcut letter y)es #: src/tools/hunspell.cxx:1330 msgid "y" msgstr "" #: src/tools/hunspell.cxx:1430 msgid "Can't create tempfile" msgstr "" #: src/tools/hunspell.cxx:1469 msgid "Can't open outputfile" msgstr "" #: src/tools/hunspell.cxx:1621 #, c-format msgid "Usage: hunspell [OPTION]... [FILE]...\n" msgstr "" #: src/tools/hunspell.cxx:1622 #, c-format msgid "" "Check spelling of each FILE. Without FILE, check standard input.\n" "\n" msgstr "" #: src/tools/hunspell.cxx:1623 #, c-format msgid " -1\t\tcheck only first field in lines (delimiter = tabulator)\n" msgstr "" #: src/tools/hunspell.cxx:1624 #, c-format msgid " -a\t\tIspell's pipe interface\n" msgstr "" #: src/tools/hunspell.cxx:1625 #, c-format msgid " --check-url\tcheck URLs, e-mail addresses and directory paths\n" msgstr "" #: src/tools/hunspell.cxx:1626 #, c-format msgid " --check-apostrophe\tcheck Unicode typographic apostrophe\n" msgstr "" #: src/tools/hunspell.cxx:1627 #, c-format msgid " -d d[,d2,...]\tuse d (d2 etc.) dictionaries\n" msgstr "" #: src/tools/hunspell.cxx:1628 #, c-format msgid " -D\t\tshow available dictionaries\n" msgstr "" #: src/tools/hunspell.cxx:1629 #, c-format msgid " -G\t\tprint only correct words or lines\n" msgstr "" #: src/tools/hunspell.cxx:1630 #, c-format msgid " -h, --help\tdisplay this help and exit\n" msgstr "" #: src/tools/hunspell.cxx:1631 #, c-format msgid " -H\t\tHTML input file format\n" msgstr "" #: src/tools/hunspell.cxx:1632 #, c-format msgid " -i enc\tinput encoding\n" msgstr "" #: src/tools/hunspell.cxx:1633 #, c-format msgid " -l\t\tprint misspelled words\n" msgstr "" #: src/tools/hunspell.cxx:1634 #, c-format msgid " -L\t\tprint lines with misspelled words\n" msgstr "" #: src/tools/hunspell.cxx:1635 #, c-format msgid " -m \t\tanalyze the words of the input text\n" msgstr "" #: src/tools/hunspell.cxx:1636 #, c-format msgid " -n\t\tnroff/troff input file format\n" msgstr "" #: src/tools/hunspell.cxx:1637 #, c-format msgid " -O\t\tOpenDocument (ODF or Flat ODF) input file format\n" msgstr "" #: src/tools/hunspell.cxx:1638 #, c-format msgid " -p dict\tset dict custom dictionary\n" msgstr "" #: src/tools/hunspell.cxx:1639 #, c-format msgid " -r\t\twarn of the potential mistakes (rare words)\n" msgstr "" #: src/tools/hunspell.cxx:1640 #, c-format msgid " -P password\tset password for encrypted dictionaries\n" msgstr "" #: src/tools/hunspell.cxx:1641 #, c-format msgid " -s \t\tstem the words of the input text\n" msgstr "" #: src/tools/hunspell.cxx:1642 #, c-format msgid " -t\t\tTeX/LaTeX input file format\n" msgstr "" #: src/tools/hunspell.cxx:1648 #, c-format msgid " -v, --version\tprint version number\n" msgstr "" #: src/tools/hunspell.cxx:1649 #, c-format msgid " -vv\t\tprint Ispell compatible version number\n" msgstr "" #: src/tools/hunspell.cxx:1650 #, c-format msgid " -w\t\tprint misspelled words (= lines) from one word/line input.\n" msgstr "" #: src/tools/hunspell.cxx:1651 #, c-format msgid "" " -X\t\tXML input file format\n" "\n" msgstr "" #: src/tools/hunspell.cxx:1652 #, c-format msgid "" "Example: hunspell -d en_US file.txt # interactive spelling\n" " hunspell -i utf-8 file.txt # check UTF-8 encoded file\n" " hunspell -l *.odt # print misspelled words of ODF " "files\n" "\n" " # Quick fix of ODF documents by personal dictionary creation\n" "\n" " # 1 Make a reduced list from misspelled and unknown words:\n" "\n" " hunspell -l *.odt | sort | uniq >words\n" "\n" " # 2 Delete misspelled words of the file by a text editor.\n" " # 3 Use this personal dictionary to fix the deleted words:\n" "\n" " hunspell -p words *.odt\n" "\n" msgstr "" #: src/tools/hunspell.cxx:1661 #, c-format msgid "Bug reports: http://hunspell.sourceforge.net\n" msgstr "" #: src/tools/hunspell.cxx:1667 #, c-format msgid "" "\n" "Copyright (C) 2002-2014 László Németh. License: MPL/GPL/LGPL.\n" "\n" "Based on OpenOffice.org's Myspell library.\n" "Myspell's copyright (C) Kevin Hendricks, 2001-2002, License: BSD.\n" "\n" msgstr "" #: src/tools/hunspell.cxx:1670 #, c-format msgid "" "This is free software; see the source for copying conditions. There is NO\n" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE,\n" "to the extent permitted by law.\n" msgstr "" #: src/tools/hunspell.cxx:1770 src/tools/hunspell.cxx:1894 #: src/tools/hunspell.cxx:1911 #, c-format msgid "Can't open %s.\n" msgstr "" #: src/tools/hunspell.cxx:1819 #, c-format msgid "" "SEARCH PATH:\n" "%s\n" msgstr "" #: src/tools/hunspell.cxx:1820 #, c-format msgid "AVAILABLE DICTIONARIES (path is not mandatory for -d option):\n" msgstr "" #: src/tools/hunspell.cxx:1832 #, c-format msgid "" "LOADED DICTIONARY:\n" "%s\n" "%s\n" msgstr "" #: src/tools/hunspell.cxx:1850 #, c-format msgid "error - %s exceeds dictionary limit.\n" msgstr "" #: src/tools/hunspell.cxx:1854 #, c-format msgid "Can't open affix or dictionary files for dictionary named \"%s\".\n" msgstr "" #: src/tools/hunspell.cxx:1921 #, c-format msgid "Hunspell has been compiled without Ncurses user interface.\n" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/apparmorapplet.po0000644000000000000000000000261312734303741021014 0ustar # German, Low translation for apparmor # Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009 # This file is distributed under the same license as the apparmor package. # FIRST AUTHOR , 2009. # msgid "" msgstr "" "Project-Id-Version: apparmor\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2007-02-06 14:27-0800\n" "PO-Revision-Date: 2009-04-19 23:40+0000\n" "Last-Translator: Johannes Ballmann \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 18:13+0000\n" "X-Generator: Launchpad (build 18115)\n" #: src/apparmor-applet.c:244 msgid "" "AppArmorApplet is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2 of the License, or\n" "(at your option) any later version." msgstr "" #: src/preferences_dialog.c:31 msgid "AppArmor Desktop Preferences" msgstr "AppArmor Desktopinstellungen" #: src/preferences_dialog.c:46 msgid "Profile Generation" msgstr "" #: src/preferences_dialog.c:54 msgid "Path" msgstr "Padd" #: src/preferences_dialog.c:76 msgid "YAST" msgstr "YAST" #: src/preferences_dialog.c:77 msgid "genprof" msgstr "" #: src/reject_list.c:58 msgid "AppArmor Rejections" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/apt.po0000644000000000000000000012105512734303741016553 0ustar # German, Low translation for apt # Copyright (c) (c) 2006 Canonical Ltd, and Rosetta Contributors 2006 # This file is distributed under the same license as the apt package. # FIRST AUTHOR , 2006. # msgid "" msgstr "" "Project-Id-Version: apt\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-03-25 09:30+0100\n" "PO-Revision-Date: 2010-10-12 10:56+0000\n" "Last-Translator: tbds \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2016-06-27 15:57+0000\n" "X-Generator: Launchpad (build 18115)\n" #. TRANSLATOR: Very short word to be displayed before unchanged files in 'apt-get update' #: apt-private/acqprogress.cc #, c-format msgid "Hit:%lu %s" msgstr "" #. TRANSLATOR: Very short word to be displayed for files processed in 'apt-get update' #. Potentially replaced later by "Hit:", "Ign:" or "Err:" if something (bad) happens #: apt-private/acqprogress.cc #, c-format msgid "Get:%lu %s" msgstr "" #. TRANSLATOR: Very short word to be displayed for files in 'apt-get update' #. which failed to download, but the error is ignored (compare "Err:") #: apt-private/acqprogress.cc #, c-format msgid "Ign:%lu %s" msgstr "" #. TRANSLATOR: Very short word to be displayed for files in 'apt-get update' #. which failed to download and the error is critical (compare "Ign:") #: apt-private/acqprogress.cc #, c-format msgid "Err:%lu %s" msgstr "" #: apt-private/acqprogress.cc #, c-format msgid "Fetched %sB in %s (%sB/s)\n" msgstr "" #: apt-private/acqprogress.cc msgid " [Working]" msgstr "" #: apt-private/acqprogress.cc #, c-format msgid "" "Media change: please insert the disc labeled\n" " '%s'\n" "in the drive '%s' and press [Enter]\n" msgstr "" #: apt-private/private-cachefile.cc msgid "Correcting dependencies..." msgstr "" #: apt-private/private-cachefile.cc msgid " failed." msgstr "" #: apt-private/private-cachefile.cc msgid "Unable to correct dependencies" msgstr "" #: apt-private/private-cachefile.cc msgid "Unable to minimize the upgrade set" msgstr "" #: apt-private/private-cachefile.cc msgid " Done" msgstr "" #: apt-private/private-cachefile.cc msgid "You might want to run 'apt-get -f install' to correct these." msgstr "" #: apt-private/private-cachefile.cc msgid "Unmet dependencies. Try using -f." msgstr "" #: apt-private/private-cacheset.cc apt-private/private-search.cc msgid "Sorting" msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "Note, selecting '%s' for task '%s'\n" msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "Note, selecting '%s' for glob '%s'\n" msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "Note, selecting '%s' for regex '%s'\n" msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "Package %s is a virtual package provided by:\n" msgstr "" #: apt-private/private-cacheset.cc msgid " [Installed]" msgstr "" #: apt-private/private-cacheset.cc msgid " [Not candidate version]" msgstr "" #: apt-private/private-cacheset.cc msgid "You should explicitly select one to install." msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "" "Package %s is not available, but is referred to by another package.\n" "This may mean that the package is missing, has been obsoleted, or\n" "is only available from another source\n" msgstr "" #: apt-private/private-cacheset.cc msgid "However the following packages replace it:" msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "Package '%s' has no installation candidate" msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "Virtual packages like '%s' can't be removed\n" msgstr "" #. TRANSLATORS: Note, this is not an interactive question #: apt-private/private-cacheset.cc apt-private/private-install.cc #, c-format msgid "Package '%s' is not installed, so not removed. Did you mean '%s'?\n" msgstr "" #: apt-private/private-cacheset.cc apt-private/private-install.cc #, c-format msgid "Package '%s' is not installed, so not removed\n" msgstr "" #: apt-private/private-cacheset.cc #, c-format msgid "Note, selecting '%s' instead of '%s'\n" msgstr "" #: apt-private/private-cmndline.cc msgid "Most used commands:" msgstr "" #: apt-private/private-cmndline.cc #, c-format msgid "See %s for more information about the available commands." msgstr "" #: apt-private/private-cmndline.cc msgid "" "Configuration options and syntax is detailed in apt.conf(5).\n" "Information about how to configure sources can be found in sources.list(5).\n" "Package and version choices can be expressed via apt_preferences(5).\n" "Security details are available in apt-secure(8).\n" msgstr "" #: apt-private/private-cmndline.cc msgid "This APT has Super Cow Powers." msgstr "" #: apt-private/private-cmndline.cc msgid "This APT helper has Super Meep Powers." msgstr "" #: apt-private/private-depends.cc apt-private/private-show.cc #: cmdline/apt-mark.cc msgid "No packages found" msgstr "Keine Pakete gefunden" #: apt-private/private-download.cc msgid "WARNING: The following packages cannot be authenticated!" msgstr "" #: apt-private/private-download.cc msgid "Authentication warning overridden.\n" msgstr "" #: apt-private/private-download.cc msgid "Some packages could not be authenticated" msgstr "" #: apt-private/private-download.cc msgid "Install these packages without verification?" msgstr "" #: apt-private/private-download.cc apt-private/private-install.cc msgid "" "--force-yes is deprecated, use one of the options starting with --allow " "instead." msgstr "" #: apt-private/private-download.cc msgid "" "There were unauthenticated packages and -y was used without --allow-" "unauthenticated" msgstr "" #: apt-private/private-download.cc #, c-format msgid "Failed to fetch %s %s\n" msgstr "" #: apt-private/private-download.cc #, c-format msgid "Couldn't determine free space in %s" msgstr "" #: apt-private/private-download.cc #, c-format msgid "You don't have enough free space in %s." msgstr "" #: apt-private/private-download.cc msgid "Unable to lock the download directory" msgstr "" #: apt-private/private-install.cc msgid "" "Some packages could not be installed. This may mean that you have\n" "requested an impossible situation or if you are using the unstable\n" "distribution that some required packages have not yet been created\n" "or been moved out of Incoming." msgstr "" #. #. if (Packages == 1) #. { #. c1out << std::endl; #. c1out << #. _("Since you only requested a single operation it is extremely likely that\n" #. "the package is simply not installable and a bug report against\n" #. "that package should be filed.") << std::endl; #. } #. #: apt-private/private-install.cc msgid "The following information may help to resolve the situation:" msgstr "" #: apt-private/private-install.cc msgid "Broken packages" msgstr "" #: apt-private/private-install.cc msgid "Internal error, InstallPackages was called with broken packages!" msgstr "" #: apt-private/private-install.cc msgid "Packages need to be removed but remove is disabled." msgstr "" #: apt-private/private-install.cc msgid "" "Essential packages were removed and -y was used without --allow-remove-" "essential." msgstr "" #: apt-private/private-install.cc msgid "Packages were downgraded and -y was used without --allow-downgrades." msgstr "" #: apt-private/private-install.cc msgid "" "Held packages were changed and -y was used without --allow-change-held-" "packages." msgstr "" #: apt-private/private-install.cc msgid "Internal error, Ordering didn't finish" msgstr "" #: apt-private/private-install.cc msgid "How odd... The sizes didn't match, email apt@packages.debian.org" msgstr "" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB #: apt-private/private-install.cc #, c-format msgid "Need to get %sB/%sB of archives.\n" msgstr "" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB #: apt-private/private-install.cc #, c-format msgid "Need to get %sB of archives.\n" msgstr "" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB #: apt-private/private-install.cc #, c-format msgid "After this operation, %sB of additional disk space will be used.\n" msgstr "" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB #: apt-private/private-install.cc #, c-format msgid "After this operation, %sB disk space will be freed.\n" msgstr "" #: apt-private/private-install.cc msgid "Trivial Only specified but this is not a trivial operation." msgstr "" #. TRANSLATOR: This string needs to be typed by the user as a confirmation, so be #. careful with hard to type or special characters (like non-breaking spaces) #: apt-private/private-install.cc msgid "Yes, do as I say!" msgstr "" #: apt-private/private-install.cc #, c-format msgid "" "You are about to do something potentially harmful.\n" "To continue type in the phrase '%s'\n" " ?] " msgstr "" #: apt-private/private-install.cc msgid "Abort." msgstr "" #: apt-private/private-install.cc msgid "Do you want to continue?" msgstr "" #: apt-private/private-install.cc msgid "Some files failed to download" msgstr "" #: apt-private/private-install.cc apt-private/private-source.cc msgid "Download complete and in download only mode" msgstr "" #: apt-private/private-install.cc msgid "" "Unable to fetch some archives, maybe run apt-get update or try with --fix-" "missing?" msgstr "" #: apt-private/private-install.cc msgid "--fix-missing and media swapping is not currently supported" msgstr "" #: apt-private/private-install.cc msgid "Unable to correct missing packages." msgstr "" #: apt-private/private-install.cc msgid "Aborting install." msgstr "" #: apt-private/private-install.cc msgid "" "The following package disappeared from your system as\n" "all files have been overwritten by other packages:" msgid_plural "" "The following packages disappeared from your system as\n" "all files have been overwritten by other packages:" msgstr[0] "" msgstr[1] "" #: apt-private/private-install.cc msgid "Note: This is done automatically and on purpose by dpkg." msgstr "" #: apt-private/private-install.cc msgid "We are not supposed to delete stuff, can't start AutoRemover" msgstr "" #: apt-private/private-install.cc msgid "" "Hmm, seems like the AutoRemover destroyed something which really\n" "shouldn't happen. Please file a bug report against apt." msgstr "" #: apt-private/private-install.cc msgid "Internal Error, AutoRemover broke stuff" msgstr "" #: apt-private/private-install.cc msgid "" "The following package was automatically installed and is no longer required:" msgid_plural "" "The following packages were automatically installed and are no longer " "required:" msgstr[0] "" msgstr[1] "" #: apt-private/private-install.cc #, c-format msgid "%lu package was automatically installed and is no longer required.\n" msgid_plural "" "%lu packages were automatically installed and are no longer required.\n" msgstr[0] "" msgstr[1] "" #: apt-private/private-install.cc #, c-format msgid "Use '%s' to remove it." msgid_plural "Use '%s' to remove them." msgstr[0] "" msgstr[1] "" #: apt-private/private-install.cc msgid "You might want to run 'apt-get -f install' to correct these:" msgstr "" #: apt-private/private-install.cc msgid "" "Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a " "solution)." msgstr "" #: apt-private/private-install.cc msgid "The following additional packages will be installed:" msgstr "" #: apt-private/private-install.cc msgid "Suggested packages:" msgstr "" #: apt-private/private-install.cc msgid "Recommended packages:" msgstr "" #: apt-private/private-install.cc #, c-format msgid "Skipping %s, it is already installed and upgrade is not set.\n" msgstr "" #: apt-private/private-install.cc #, c-format msgid "Skipping %s, it is not installed and only upgrades are requested.\n" msgstr "" #: apt-private/private-install.cc #, c-format msgid "Reinstallation of %s is not possible, it cannot be downloaded.\n" msgstr "" #. TRANSLATORS: First string is package name, second is version #: apt-private/private-install.cc #, c-format msgid "%s is already the newest version (%s).\n" msgstr "" #: apt-private/private-install.cc cmdline/apt-get.cc cmdline/apt-mark.cc #, c-format msgid "%s set to manually installed.\n" msgstr "" #: apt-private/private-install.cc #, c-format msgid "Selected version '%s' (%s) for '%s'\n" msgstr "" #: apt-private/private-install.cc #, c-format msgid "Selected version '%s' (%s) for '%s' because of '%s'\n" msgstr "" #: apt-private/private-list.cc msgid "Listing" msgstr "" #: apt-private/private-list.cc #, c-format msgid "There is %i additional version. Please use the '-a' switch to see it" msgid_plural "" "There are %i additional versions. Please use the '-a' switch to see them." msgstr[0] "" msgstr[1] "" #: apt-private/private-main.cc msgid "" "NOTE: This is only a simulation!\n" " apt-get needs root privileges for real execution.\n" " Keep also in mind that locking is deactivated,\n" " so don't depend on the relevance to the real current situation!" msgstr "" #: apt-private/private-output.cc apt-private/private-show.cc msgid "unknown" msgstr "" #: apt-private/private-output.cc #, c-format msgid "[installed,upgradable to: %s]" msgstr "" #: apt-private/private-output.cc msgid "[installed,local]" msgstr "" #: apt-private/private-output.cc msgid "[installed,auto-removable]" msgstr "" #: apt-private/private-output.cc msgid "[installed,automatic]" msgstr "" #: apt-private/private-output.cc msgid "[installed]" msgstr "" #: apt-private/private-output.cc #, c-format msgid "[upgradable from: %s]" msgstr "" #: apt-private/private-output.cc msgid "[residual-config]" msgstr "" #: apt-private/private-output.cc #, c-format msgid "but %s is installed" msgstr "" #: apt-private/private-output.cc #, c-format msgid "but %s is to be installed" msgstr "" #: apt-private/private-output.cc msgid "but it is not installable" msgstr "" #: apt-private/private-output.cc msgid "but it is a virtual package" msgstr "" #: apt-private/private-output.cc msgid "but it is not installed" msgstr "" #: apt-private/private-output.cc msgid "but it is not going to be installed" msgstr "" #: apt-private/private-output.cc msgid " or" msgstr "" #: apt-private/private-output.cc msgid "The following packages have unmet dependencies:" msgstr "" #: apt-private/private-output.cc msgid "The following NEW packages will be installed:" msgstr "" #: apt-private/private-output.cc msgid "The following packages will be REMOVED:" msgstr "" #: apt-private/private-output.cc msgid "The following packages have been kept back:" msgstr "" #: apt-private/private-output.cc msgid "The following packages will be upgraded:" msgstr "" #: apt-private/private-output.cc msgid "The following packages will be DOWNGRADED:" msgstr "" #: apt-private/private-output.cc msgid "The following held packages will be changed:" msgstr "" #: apt-private/private-output.cc #, c-format msgid "%s (due to %s)" msgstr "" #: apt-private/private-output.cc msgid "" "WARNING: The following essential packages will be removed.\n" "This should NOT be done unless you know exactly what you are doing!" msgstr "" #: apt-private/private-output.cc #, c-format msgid "%lu upgraded, %lu newly installed, " msgstr "" #: apt-private/private-output.cc #, c-format msgid "%lu reinstalled, " msgstr "" #: apt-private/private-output.cc #, c-format msgid "%lu downgraded, " msgstr "" #: apt-private/private-output.cc #, c-format msgid "%lu to remove and %lu not upgraded.\n" msgstr "" #: apt-private/private-output.cc #, c-format msgid "%lu not fully installed or removed.\n" msgstr "" #. TRANSLATOR: Yes/No question help-text: defaulting to Y[es] #. e.g. "Do you want to continue? [Y/n] " #. The user has to answer with an input matching the #. YESEXPR/NOEXPR defined in your l10n. #: apt-private/private-output.cc msgid "[Y/n]" msgstr "" #. TRANSLATOR: Yes/No question help-text: defaulting to N[o] #. e.g. "Should this file be removed? [y/N] " #. The user has to answer with an input matching the #. YESEXPR/NOEXPR defined in your l10n. #: apt-private/private-output.cc msgid "[y/N]" msgstr "" #. TRANSLATOR: "Yes" answer printed for a yes/no question if --assume-yes is set #: apt-private/private-output.cc msgid "Y" msgstr "" #. TRANSLATOR: "No" answer printed for a yes/no question if --assume-no is set #: apt-private/private-output.cc msgid "N" msgstr "" #: apt-private/private-output.cc #, c-format msgid "Regex compilation error - %s" msgstr "" #: apt-private/private-search.cc msgid "You must give at least one search pattern" msgstr "" #: apt-private/private-search.cc msgid "Full Text Search" msgstr "" #: apt-private/private-show.cc cmdline/apt-cache.cc #, c-format msgid "Package file %s is out of sync." msgstr "Paket-Datei %s ist nicht synchron." #: apt-private/private-show.cc #, c-format msgid "There is %i additional record. Please use the '-a' switch to see it" msgid_plural "" "There are %i additional records. Please use the '-a' switch to see them." msgstr[0] "" msgstr[1] "" #: apt-private/private-show.cc msgid "not a real package (virtual)" msgstr "" #: apt-private/private-show.cc #, c-format msgid "Unable to locate package %s" msgstr "Kann Paket %s nicht finden." #: apt-private/private-show.cc msgid "Package files:" msgstr "Paket-Dateien:" #: apt-private/private-show.cc msgid "Cache is out of sync, can't x-ref a package file" msgstr "" #. Show any packages have explicit pins #: apt-private/private-show.cc msgid "Pinned packages:" msgstr "" #: apt-private/private-show.cc msgid "(not found)" msgstr "(nicht gefunden)" #. Print the package name and the version we are forcing to #: apt-private/private-show.cc #, c-format msgid "%s -> %s with priority %d\n" msgstr "" #: apt-private/private-show.cc msgid " Installed: " msgstr " installierte Version: " #: apt-private/private-show.cc msgid " Candidate: " msgstr "" #: apt-private/private-show.cc msgid "(none)" msgstr "(keine)" #: apt-private/private-show.cc msgid " Package pin: " msgstr "" #. Show the priority tables #: apt-private/private-show.cc msgid " Version table:" msgstr " Versionstabelle:" #: apt-private/private-source.cc #, c-format msgid "Can not find a package for architecture '%s'" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Can not find a package '%s' with version '%s'" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Can not find a package '%s' with release '%s'" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Picking '%s' as source package instead of '%s'\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Can not find version '%s' of package '%s'" msgstr "" #: apt-private/private-source.cc msgid "Must specify at least one package to fetch source for" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Unable to find a source package for %s" msgstr "" #: apt-private/private-source.cc #, c-format msgid "" "NOTICE: '%s' packaging is maintained in the '%s' version control system at:\n" "%s\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "" "Please use:\n" "%s\n" "to retrieve the latest (possibly unreleased) updates to the package.\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Skipping already downloaded file '%s'\n" msgstr "" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB #: apt-private/private-source.cc #, c-format msgid "Need to get %sB/%sB of source archives.\n" msgstr "" #. TRANSLATOR: The required space between number and unit is already included #. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB #: apt-private/private-source.cc #, c-format msgid "Need to get %sB of source archives.\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Fetch source %s\n" msgstr "" #: apt-private/private-source.cc msgid "Failed to fetch some archives." msgstr "" #: apt-private/private-source.cc #, c-format msgid "Skipping unpack of already unpacked source in %s\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Unpack command '%s' failed.\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Check if the 'dpkg-dev' package is installed.\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Build command '%s' failed.\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Unable to get build-dependency information for %s" msgstr "" #: apt-private/private-source.cc #, c-format msgid "%s has no build depends.\n" msgstr "" #: apt-private/private-source.cc msgid "Must specify at least one package to check builddeps for" msgstr "" #: apt-private/private-source.cc #, c-format msgid "" "No architecture information available for %s. See apt.conf(5) " "APT::Architectures for setup" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Note, using directory '%s' to get the build dependencies\n" msgstr "" #: apt-private/private-source.cc #, c-format msgid "Note, using file '%s' to get the build dependencies\n" msgstr "" #: apt-private/private-source.cc msgid "Failed to process build dependencies" msgstr "" #: apt-private/private-sources.cc #, c-format msgid "Failed to parse %s. Edit again? " msgstr "" #: apt-private/private-sources.cc #, c-format msgid "Your '%s' file changed, please run 'apt-get update'." msgstr "" #: apt-private/private-unmet.cc #, c-format msgid "Package %s version %s has an unmet dep:\n" msgstr "Paket %s, version %s hat eine unaufgelöste Abhängigkeit:\n" #: apt-private/private-update.cc msgid "The update command takes no arguments" msgstr "" #: apt-private/private-update.cc #, c-format msgid "%i package can be upgraded. Run 'apt list --upgradable' to see it.\n" msgid_plural "" "%i packages can be upgraded. Run 'apt list --upgradable' to see them.\n" msgstr[0] "" msgstr[1] "" #: apt-private/private-update.cc msgid "All packages are up to date." msgstr "" #: cmdline/apt-cache.cc msgid "apt-cache stats does not take any arguments" msgstr "" #: cmdline/apt-cache.cc msgid "Total package names: " msgstr "" #: cmdline/apt-cache.cc msgid "Total package structures: " msgstr "" #: cmdline/apt-cache.cc msgid " Normal packages: " msgstr " Normale Pakete: " #: cmdline/apt-cache.cc msgid " Pure virtual packages: " msgstr " rein virtuelle Pakete: " #: cmdline/apt-cache.cc msgid " Single virtual packages: " msgstr " einzelne virtuelle Pakete: " #: cmdline/apt-cache.cc msgid " Mixed virtual packages: " msgstr " gemischte virtuelle Pakete: " #: cmdline/apt-cache.cc msgid " Missing: " msgstr " Fehlend: " #: cmdline/apt-cache.cc msgid "Total distinct versions: " msgstr "Gesamtzahl unterschiedlicher Versionen: " #: cmdline/apt-cache.cc msgid "Total distinct descriptions: " msgstr "" #: cmdline/apt-cache.cc msgid "Total dependencies: " msgstr "Gesamtzahl der Abhängigkeiten: " #: cmdline/apt-cache.cc msgid "Total ver/file relations: " msgstr "Gesamtzahl der Versions/Datei Beziehungen: " #: cmdline/apt-cache.cc msgid "Total Desc/File relations: " msgstr "" #: cmdline/apt-cache.cc msgid "Total Provides mappings: " msgstr "" #: cmdline/apt-cache.cc msgid "Total globbed strings: " msgstr "" #: cmdline/apt-cache.cc msgid "Total slack space: " msgstr "Gesamter nicht nutzbarer Raum: " #: cmdline/apt-cache.cc msgid "Total space accounted for: " msgstr "Gesamter reservierter Raum für: " #: cmdline/apt-cache.cc msgid "This command is deprecated. Please use 'apt-mark showauto' instead." msgstr "" #: cmdline/apt-cache.cc msgid "" "Usage: apt-cache [options] command\n" " apt-cache [options] show pkg1 [pkg2 ...]\n" "\n" "apt-cache queries and displays available information about installed\n" "and installable packages. It works exclusively on the data acquired\n" "into the local cache via the 'update' command of e.g. apt-get. The\n" "displayed information may therefore be outdated if the last update was\n" "too long ago, but in exchange apt-cache works independently of the\n" "availability of the configured sources (e.g. offline).\n" msgstr "" #: cmdline/apt-cache.cc msgid "Show source records" msgstr "" #: cmdline/apt-cache.cc msgid "Search the package list for a regex pattern" msgstr "" #: cmdline/apt-cache.cc msgid "Show raw dependency information for a package" msgstr "" #: cmdline/apt-cache.cc msgid "Show reverse dependency information for a package" msgstr "" #: cmdline/apt-cache.cc msgid "Show a readable record for the package" msgstr "" #: cmdline/apt-cache.cc msgid "List the names of all packages in the system" msgstr "" #: cmdline/apt-cache.cc msgid "Show policy settings" msgstr "" #: cmdline/apt-cdrom.cc msgid "Please provide a name for this Disc, such as 'Debian 5.0.3 Disk 1'" msgstr "" #: cmdline/apt-cdrom.cc msgid "Please insert a Disc in the drive and press [Enter]" msgstr "" #: cmdline/apt-cdrom.cc #, c-format msgid "Failed to mount '%s' to '%s'" msgstr "" #: cmdline/apt-cdrom.cc msgid "" "No CD-ROM could be auto-detected or found using the default mount point.\n" "You may try the --cdrom option to set the CD-ROM mount point.\n" "See 'man apt-cdrom' for more information about the CD-ROM auto-detection and " "mount point." msgstr "" #: cmdline/apt-cdrom.cc msgid "Repeat this process for the rest of the CDs in your set." msgstr "Wiederholen sie diesen Vorgang für den Rest der CDs in ihrem Set." #: cmdline/apt-cdrom.cc msgid "" "Usage: apt-cdrom [options] command\n" "\n" "apt-cdrom is used to add CDROM's, USB flashdrives and other removable\n" "media types as package sources to APT. The mount point and device\n" "information is taken from apt.conf(5), udev(7) and fstab(5).\n" msgstr "" #: cmdline/apt-config.cc msgid "Arguments not in pairs" msgstr "Argumente sind nicht paarweise" #: cmdline/apt-config.cc msgid "" "Usage: apt-config [options] command\n" "\n" "apt-config is an interface to the configuration settings used by\n" "all APT tools, mainly intended for debugging and shell scripting.\n" msgstr "" #: cmdline/apt-config.cc msgid "get configuration values via shell evaluation" msgstr "" #: cmdline/apt-config.cc msgid "show the active configuration setting" msgstr "" #: cmdline/apt-get.cc #, c-format msgid "Couldn't find package %s" msgstr "" #: cmdline/apt-get.cc cmdline/apt-mark.cc #, c-format msgid "%s set to automatically installed.\n" msgstr "" #: cmdline/apt-get.cc cmdline/apt-mark.cc msgid "" "This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' " "instead." msgstr "" #: cmdline/apt-get.cc msgid "Internal error, problem resolver broke stuff" msgstr "" #: cmdline/apt-get.cc msgid "Supported modules:" msgstr "" #: cmdline/apt-get.cc msgid "" "Usage: apt-get [options] command\n" " apt-get [options] install|remove pkg1 [pkg2 ...]\n" " apt-get [options] source pkg1 [pkg2 ...]\n" "\n" "apt-get is a command line interface for retrieval of packages\n" "and information about them from authenticated sources and\n" "for installation, upgrade and removal of packages together\n" "with their dependencies.\n" msgstr "" #: cmdline/apt-get.cc msgid "Retrieve new lists of packages" msgstr "" #: cmdline/apt-get.cc msgid "Perform an upgrade" msgstr "" #: cmdline/apt-get.cc msgid "Install new packages (pkg is libc6 not libc6.deb)" msgstr "" #: cmdline/apt-get.cc msgid "Remove packages" msgstr "" #: cmdline/apt-get.cc msgid "Remove packages and config files" msgstr "" #: cmdline/apt-get.cc cmdline/apt.cc msgid "Remove automatically all unused packages" msgstr "" #: cmdline/apt-get.cc msgid "Distribution upgrade, see apt-get(8)" msgstr "" #: cmdline/apt-get.cc msgid "Follow dselect selections" msgstr "" #: cmdline/apt-get.cc msgid "Configure build-dependencies for source packages" msgstr "" #: cmdline/apt-get.cc msgid "Erase downloaded archive files" msgstr "" #: cmdline/apt-get.cc msgid "Erase old downloaded archive files" msgstr "" #: cmdline/apt-get.cc msgid "Verify that there are no broken dependencies" msgstr "" #: cmdline/apt-get.cc msgid "Download source archives" msgstr "" #: cmdline/apt-get.cc msgid "Download the binary package into the current directory" msgstr "" #: cmdline/apt-get.cc msgid "Download and display the changelog for the given package" msgstr "" #: cmdline/apt-helper.cc msgid "Need one URL as argument" msgstr "" #: cmdline/apt-helper.cc msgid "Must specify at least one pair url/filename" msgstr "" #: cmdline/apt-helper.cc msgid "Download Failed" msgstr "" #: cmdline/apt-helper.cc #, c-format msgid "GetSrvRec failed for %s" msgstr "" #: cmdline/apt-helper.cc msgid "" "Usage: apt-helper [options] command\n" " apt-helper [options] cat-file file ...\n" " apt-helper [options] download-file uri target-path\n" "\n" "apt-helper bundles a variety of commands for shell scripts to use\n" "e.g. the same proxy configuration or acquire system as APT would.\n" msgstr "" #: cmdline/apt-helper.cc msgid "download the given uri to the target-path" msgstr "" #: cmdline/apt-helper.cc msgid "lookup a SRV record (e.g. _http._tcp.ftp.debian.org)" msgstr "" #: cmdline/apt-helper.cc msgid "concatenate files, with automatic decompression" msgstr "" #: cmdline/apt-helper.cc msgid "detect proxy using apt.conf" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "%s can not be marked as it is not installed.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "%s was already set to manually installed.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "%s was already set to automatically installed.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "%s was already set on hold.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "%s was already not hold.\n" msgstr "" #: cmdline/apt-mark.cc msgid "Executing dpkg failed. Are you root?" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "%s set on hold.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "Canceled hold on %s.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "Selected %s for purge.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "Selected %s for removal.\n" msgstr "" #: cmdline/apt-mark.cc #, c-format msgid "Selected %s for installation.\n" msgstr "" #: cmdline/apt-mark.cc msgid "" "Usage: apt-mark [options] {auto|manual} pkg1 [pkg2 ...]\n" "\n" "apt-mark is a simple command line interface for marking packages\n" "as manually or automatically installed. It can also be used to\n" "manipulate the dpkg(1) selection states of packages, and to list\n" "all packages with or without a certain marking.\n" msgstr "" #: cmdline/apt-mark.cc msgid "Mark the given packages as automatically installed" msgstr "" #: cmdline/apt-mark.cc msgid "Mark the given packages as manually installed" msgstr "" #: cmdline/apt-mark.cc msgid "Mark a package as held back" msgstr "" #: cmdline/apt-mark.cc msgid "Unset a package set as held back" msgstr "" #: cmdline/apt-mark.cc msgid "Print the list of automatically installed packages" msgstr "" #: cmdline/apt-mark.cc msgid "Print the list of manually installed packages" msgstr "" #: cmdline/apt-mark.cc msgid "Print the list of package on hold" msgstr "" #: cmdline/apt.cc msgid "" "Usage: apt [options] command\n" "\n" "apt is a commandline package manager and provides commands for\n" "searching and managing as well as querying information about packages.\n" "It provides the same functionality as the specialized APT tools,\n" "like apt-get and apt-cache, but enables options more suitable for\n" "interactive use by default.\n" msgstr "" #. query #: cmdline/apt.cc msgid "list packages based on package names" msgstr "" #: cmdline/apt.cc msgid "search in package descriptions" msgstr "" #: cmdline/apt.cc msgid "show package details" msgstr "" #. package stuff #: cmdline/apt.cc msgid "install packages" msgstr "" #: cmdline/apt.cc msgid "remove packages" msgstr "" #. system wide stuff #: cmdline/apt.cc msgid "update list of available packages" msgstr "" #: cmdline/apt.cc msgid "upgrade the system by installing/upgrading packages" msgstr "" #: cmdline/apt.cc msgid "upgrade the system by removing/installing/upgrading packages" msgstr "" #. misc #: cmdline/apt.cc msgid "edit the source information file" msgstr "" #: methods/cdrom.cc #, c-format msgid "Unable to read the cdrom database %s" msgstr "" #: methods/cdrom.cc msgid "" "Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update " "cannot be used to add new CD-ROMs" msgstr "" #: methods/cdrom.cc msgid "Wrong CD-ROM" msgstr "" #: methods/cdrom.cc #, c-format msgid "Unable to unmount the CD-ROM in %s, it may still be in use." msgstr "" #: methods/cdrom.cc msgid "Disk not found." msgstr "" #: methods/cdrom.cc methods/file.cc methods/rsh.cc msgid "File not found" msgstr "" #: methods/connect.cc #, c-format msgid "Connecting to %s (%s)" msgstr "" #: methods/connect.cc #, c-format msgid "[IP: %s %s]" msgstr "" #: methods/connect.cc #, c-format msgid "Could not create a socket for %s (f=%u t=%u p=%u)" msgstr "" #: methods/connect.cc #, c-format msgid "Cannot initiate the connection to %s:%s (%s)." msgstr "" #: methods/connect.cc #, c-format msgid "Could not connect to %s:%s (%s), connection timed out" msgstr "" #: methods/connect.cc methods/ftp.cc methods/rsh.cc msgid "Failed" msgstr "" #: methods/connect.cc #, c-format msgid "Could not connect to %s:%s (%s)." msgstr "" #. We say this mainly because the pause here is for the #. ssh connection that is still going #: methods/connect.cc methods/rsh.cc #, c-format msgid "Connecting to %s" msgstr "" #: methods/connect.cc #, c-format msgid "Could not resolve '%s'" msgstr "" #: methods/connect.cc #, c-format msgid "Temporary failure resolving '%s'" msgstr "" #: methods/connect.cc #, c-format msgid "System error resolving '%s:%s'" msgstr "" #: methods/connect.cc #, c-format msgid "Something wicked happened resolving '%s:%s' (%i - %s)" msgstr "" #: methods/connect.cc #, c-format msgid "Unable to connect to %s:%s:" msgstr "" #: methods/copy.cc methods/store.cc msgid "Failed to stat" msgstr "" #: methods/copy.cc methods/rred.cc methods/store.cc msgid "Failed to set modification time" msgstr "" #: methods/file.cc msgid "Invalid URI, local URIS must not start with //" msgstr "" #. Login must be before getpeername otherwise dante won't work. #: methods/ftp.cc msgid "Logging in" msgstr "" #: methods/ftp.cc msgid "Unable to determine the peer name" msgstr "" #: methods/ftp.cc msgid "Unable to determine the local name" msgstr "" #: methods/ftp.cc #, c-format msgid "The server refused the connection and said: %s" msgstr "" #: methods/ftp.cc #, c-format msgid "USER failed, server said: %s" msgstr "" #: methods/ftp.cc #, c-format msgid "PASS failed, server said: %s" msgstr "" #: methods/ftp.cc msgid "" "A proxy server was specified but no login script, Acquire::ftp::ProxyLogin " "is empty." msgstr "" #: methods/ftp.cc #, c-format msgid "Login script command '%s' failed, server said: %s" msgstr "" #: methods/ftp.cc #, c-format msgid "TYPE failed, server said: %s" msgstr "" #: methods/ftp.cc methods/rsh.cc msgid "Connection timeout" msgstr "" #: methods/ftp.cc msgid "Server closed the connection" msgstr "" #: methods/ftp.cc methods/rsh.cc msgid "Read error" msgstr "" #: methods/ftp.cc methods/rsh.cc msgid "A response overflowed the buffer." msgstr "" #: methods/ftp.cc msgid "Protocol corruption" msgstr "" #: methods/ftp.cc methods/rsh.cc msgid "Write error" msgstr "" #: methods/ftp.cc msgid "Could not create a socket" msgstr "" #: methods/ftp.cc msgid "Could not connect data socket, connection timed out" msgstr "" #: methods/ftp.cc msgid "Could not connect passive socket." msgstr "" #: methods/ftp.cc msgid "getaddrinfo was unable to get a listening socket" msgstr "" #: methods/ftp.cc msgid "Could not bind a socket" msgstr "" #: methods/ftp.cc msgid "Could not listen on the socket" msgstr "" #: methods/ftp.cc msgid "Could not determine the socket's name" msgstr "" #: methods/ftp.cc msgid "Unable to send PORT command" msgstr "" #: methods/ftp.cc #, c-format msgid "Unknown address family %u (AF_*)" msgstr "" #: methods/ftp.cc #, c-format msgid "EPRT failed, server said: %s" msgstr "" #: methods/ftp.cc msgid "Data socket connect timed out" msgstr "" #: methods/ftp.cc msgid "Unable to accept connection" msgstr "" #: methods/ftp.cc methods/rsh.cc methods/server.cc msgid "Problem hashing file" msgstr "" #: methods/ftp.cc #, c-format msgid "Unable to fetch file, server said '%s'" msgstr "" #: methods/ftp.cc methods/rsh.cc msgid "Data socket timed out" msgstr "" #: methods/ftp.cc #, c-format msgid "Data transfer failed, server said '%s'" msgstr "" #. Get the files information #: methods/ftp.cc msgid "Query" msgstr "" #: methods/ftp.cc msgid "Unable to invoke " msgstr "" #: methods/gpgv.cc msgid "At least one invalid signature was encountered." msgstr "" #: methods/gpgv.cc msgid "" "Internal error: Good signature, but could not determine key fingerprint?!" msgstr "" #: methods/gpgv.cc msgid "Could not execute 'apt-key' to verify signature (is gnupg installed?)" msgstr "" #. TRANSLATORS: %s is a single techy word like 'NODATA' #: methods/gpgv.cc #, c-format msgid "" "Clearsigned file isn't valid, got '%s' (does the network require " "authentication?)" msgstr "" #: methods/gpgv.cc msgid "Unknown error executing apt-key" msgstr "" #. TRANSLATORS: The second %s is the reason and is untranslated for repository owners. #: methods/gpgv.cc #, c-format msgid "Signature by key %s uses weak digest algorithm (%s)" msgstr "" #: methods/gpgv.cc msgid "The following signatures were invalid:\n" msgstr "" #: methods/gpgv.cc msgid "" "The following signatures couldn't be verified because the public key is not " "available:\n" msgstr "" #: methods/http.cc msgid "Error writing to the file" msgstr "" #: methods/http.cc msgid "Error reading from server. Remote end closed connection" msgstr "" #: methods/http.cc msgid "Error reading from server" msgstr "" #: methods/http.cc msgid "Error writing to file" msgstr "" #: methods/http.cc msgid "Select failed" msgstr "" #: methods/http.cc msgid "Connection timed out" msgstr "" #: methods/http.cc msgid "Error writing to output file" msgstr "" #: methods/mirror.cc #, c-format msgid "Unable to read %s" msgstr "" #: methods/mirror.cc #, c-format msgid "Unable to change to %s" msgstr "" #. FIXME: fallback to a default mirror here instead #. and provide a config option to define that default #: methods/mirror.cc #, c-format msgid "No mirror file '%s' found " msgstr "" #. FIXME: fallback to a default mirror here instead #. and provide a config option to define that default #: methods/mirror.cc #, c-format msgid "Can not read mirror file '%s'" msgstr "" #: methods/mirror.cc #, c-format msgid "No entry found in mirror file '%s'" msgstr "" #: methods/mirror.cc #, c-format msgid "[Mirror: %s]" msgstr "" #: methods/rred.cc #, c-format msgid "Failed to stat %s" msgstr "" #: methods/rsh.cc msgid "Failed to create IPC pipe to subprocess" msgstr "" #: methods/rsh.cc msgid "Connection closed prematurely" msgstr "" #: methods/server.cc msgid "Waiting for headers" msgstr "" #: methods/server.cc msgid "Bad header line" msgstr "" #: methods/server.cc msgid "The HTTP server sent an invalid reply header" msgstr "" #: methods/server.cc msgid "The HTTP server sent an invalid Content-Length header" msgstr "" #: methods/server.cc msgid "The HTTP server sent an invalid Content-Range header" msgstr "" #: methods/server.cc msgid "This HTTP server has broken range support" msgstr "" #: methods/server.cc msgid "Unknown date format" msgstr "" #: methods/server.cc msgid "Bad header data" msgstr "" #: methods/server.cc msgid "Connection failed" msgstr "" #: methods/server.cc #, c-format msgid "" "Automatically disabled %s due to incorrect response from server/proxy. (man " "5 apt.conf)" msgstr "" #: methods/server.cc msgid "Internal error" msgstr "" #: methods/store.cc msgid "Empty files can't be valid archives" msgstr "" #: dselect/install:33 msgid "Bad default setting!" msgstr "" #: dselect/install:52 dselect/install:84 dselect/install:88 dselect/install:95 #: dselect/install:106 dselect/update:45 msgid "Press [Enter] to continue." msgstr "" #: dselect/install:92 msgid "Do you want to erase any previously downloaded .deb files?" msgstr "" #: dselect/install:102 msgid "Some errors occurred while unpacking. Packages that were installed" msgstr "" #: dselect/install:103 msgid "will be configured. This may result in duplicate errors" msgstr "" #: dselect/install:104 msgid "or errors caused by missing dependencies. This is OK, only the errors" msgstr "" #: dselect/install:105 msgid "" "above this message are important. Please fix them and run [I]nstall again" msgstr "" #: dselect/update:30 msgid "Merging available information" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/apport.po0000644000000000000000000010172412734303741017275 0ustar # German, Low translation for apport # Copyright (c) 2006 Rosetta Contributors and Canonical Ltd 2006 # This file is distributed under the same license as the apport package. # FIRST AUTHOR , 2006. # msgid "" msgstr "" "Project-Id-Version: apport\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-05-18 09:17+0000\n" "PO-Revision-Date: 2009-12-19 17:49+0000\n" "Last-Translator: mafix \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 17:59+0000\n" "X-Generator: Launchpad (build 18115)\n" "Language: \n" #: ../gtk/apport-gtk.desktop.in.h:1 ../kde/apport-kde.desktop.in.h:1 #: ../kde/apport-kde-mime.desktop.in.h:1 msgid "Report a problem..." msgstr "Rapportiere ein Problem..." #: ../gtk/apport-gtk.desktop.in.h:2 ../kde/apport-kde.desktop.in.h:2 #: ../kde/apport-kde-mime.desktop.in.h:2 msgid "Report a malfunction to the developers" msgstr "" #: ../kde/apport-kde.py:185 ../gtk/apport-gtk.py:177 #: ../debian/tmp/usr/bin/apport-cli.py:178 #: ../debian/tmp/usr/share/apport/apport-kde.py:185 ../bin/apport-cli.py:178 #: ../debian/tmp/usr/share/apport/apport-gtk.py:177 msgid "Send problem report to the developers?" msgstr "" #: ../kde/apport-kde.py:193 ../gtk/apport-gtk.py:186 #: ../debian/tmp/usr/share/apport/apport-kde.py:193 #: ../debian/tmp/usr/share/apport/apport-gtk.py:186 msgid "Send" msgstr "" #: ../kde/apport-kde.py:199 ../kde/apport-kde.py:237 ../gtk/apport-gtk.py:165 #: ../debian/tmp/usr/share/apport/apport-kde.py:199 #: ../debian/tmp/usr/share/apport/apport-kde.py:237 #: ../debian/tmp/usr/share/apport/apport-gtk.py:165 #, python-format msgid "Sorry, %s has experienced an internal error." msgstr "" #: ../kde/apport-kde.py:207 ../gtk/apport-gtk.py:257 #: ../debian/tmp/usr/share/apport/apport-kde.py:207 #: ../debian/tmp/usr/share/apport/apport-gtk.py:257 #, python-format msgid "Package: %s" msgstr "" #: ../kde/apport-kde.py:213 ../gtk/apport-gtk.py:264 #: ../debian/tmp/usr/share/apport/apport-kde.py:213 #: ../debian/tmp/usr/share/apport/apport-gtk.py:264 msgid "Sorry, a problem occurred while installing software." msgstr "" #: ../kde/apport-kde.py:219 ../gtk/apport-gtk.py:273 ../gtk/apport-gtk.py:292 #: ../debian/tmp/usr/share/apport/apport-kde.py:219 #: ../debian/tmp/usr/share/apport/apport-gtk.py:273 #: ../debian/tmp/usr/share/apport/apport-gtk.py:292 #, python-format msgid "The application %s has experienced an internal error." msgstr "" #: ../kde/apport-kde.py:222 ../gtk/apport-gtk.py:276 #: ../debian/tmp/usr/share/apport/apport-kde.py:222 #: ../debian/tmp/usr/share/apport/apport-gtk.py:276 #, python-format msgid "The application %s has closed unexpectedly." msgstr "" #: ../kde/apport-kde.py:230 ../kde/apport-kde.py:243 ../gtk/apport-gtk.py:216 #: ../gtk/apport-gtk.py:284 ../gtk/apport-gtk.py:303 #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:12 ../gtk/apport-gtk.ui.h:12 #: ../debian/tmp/usr/share/apport/apport-kde.py:230 #: ../debian/tmp/usr/share/apport/apport-kde.py:243 #: ../debian/tmp/usr/share/apport/apport-gtk.py:216 #: ../debian/tmp/usr/share/apport/apport-gtk.py:284 #: ../debian/tmp/usr/share/apport/apport-gtk.py:303 msgid "Continue" msgstr "" #: ../kde/apport-kde.py:233 ../gtk/apport-gtk.py:287 #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:11 ../gtk/apport-gtk.ui.h:11 #: ../debian/tmp/usr/share/apport/apport-kde.py:233 #: ../debian/tmp/usr/share/apport/apport-gtk.py:287 msgid "Leave Closed" msgstr "" #: ../kde/apport-kde.py:234 ../kde/apport-kde.py:380 ../gtk/apport-gtk.py:229 #: ../gtk/apport-gtk.py:288 ../debian/tmp/usr/share/apport/apport-kde.py:234 #: ../debian/tmp/usr/share/apport/apport-kde.py:380 #: ../debian/tmp/usr/share/apport/apport-gtk.py:229 #: ../debian/tmp/usr/share/apport/apport-gtk.py:288 msgid "Relaunch" msgstr "" #: ../kde/apport-kde.py:240 ../gtk/apport-gtk.py:300 #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:6 ../gtk/apport-gtk.ui.h:6 #: ../debian/tmp/usr/share/apport/apport-kde.py:240 #: ../debian/tmp/usr/share/apport/apport-gtk.py:300 msgid "If you notice further problems, try restarting the computer." msgstr "" #: ../kde/apport-kde.py:244 ../gtk/apport-gtk.py:304 #: ../debian/tmp/usr/share/apport/apport-kde.py:244 #: ../debian/tmp/usr/share/apport/apport-gtk.py:304 msgid "Ignore future problems of this type" msgstr "" #: ../kde/apport-kde.py:288 ../gtk/apport-gtk.py:577 #: ../debian/tmp/usr/share/apport/apport-kde.py:288 #: ../debian/tmp/usr/share/apport/apport-gtk.py:577 msgid "Hide Details" msgstr "" #: ../kde/apport-kde.py:291 ../gtk/apport-gtk.py:204 ../gtk/apport-gtk.py:573 #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:9 ../gtk/apport-gtk.ui.h:9 #: ../debian/tmp/usr/share/apport/apport-kde.py:291 #: ../debian/tmp/usr/share/apport/apport-gtk.py:204 #: ../debian/tmp/usr/share/apport/apport-gtk.py:573 msgid "Show Details" msgstr "" #: ../kde/apport-kde.py:314 ../debian/tmp/usr/share/apport/apport-kde.py:314 msgid "Username:" msgstr "" #: ../kde/apport-kde.py:315 ../debian/tmp/usr/share/apport/apport-kde.py:315 msgid "Password:" msgstr "" #: ../kde/apport-kde.py:362 ../gtk/apport-gtk.py:142 #: ../debian/tmp/usr/bin/apport-cli.py:150 #: ../debian/tmp/usr/share/apport/apport-kde.py:362 ../bin/apport-cli.py:150 #: ../debian/tmp/usr/share/apport/apport-gtk.py:142 msgid "(binary data)" msgstr "" #: ../kde/apport-kde.py:405 ../debian/tmp/usr/share/apport/apport-kde.py:405 msgid "Collecting Problem Information" msgstr "" #: ../kde/apport-kde.py:406 ../debian/tmp/usr/bin/apport-cli.py:238 #: ../debian/tmp/usr/share/apport/apport-kde.py:406 ../bin/apport-cli.py:238 msgid "Collecting problem information" msgstr "" #: ../kde/apport-kde.py:407 ../debian/tmp/usr/share/apport/apport-kde.py:407 msgid "" "The collected information can be sent to the developers to improve the " "application. This might take a few minutes." msgstr "" #: ../kde/apport-kde.py:433 ../debian/tmp/usr/share/apport/apport-kde.py:433 msgid "Uploading Problem Information" msgstr "" #: ../kde/apport-kde.py:434 ../debian/tmp/usr/share/apport/apport-gtk.ui.h:15 #: ../gtk/apport-gtk.ui.h:15 ../debian/tmp/usr/bin/apport-cli.py:251 #: ../debian/tmp/usr/share/apport/apport-kde.py:434 ../bin/apport-cli.py:251 msgid "Uploading problem information" msgstr "" #: ../kde/apport-kde.py:435 ../debian/tmp/usr/share/apport/apport-gtk.ui.h:17 #: ../gtk/apport-gtk.ui.h:17 ../debian/tmp/usr/share/apport/apport-kde.py:435 msgid "" "The collected information is being sent to the bug tracking system. This " "might take a few minutes." msgstr "" #: ../kde/apport-kde.py:468 ../kde/apport-kde.py:503 ../kde/apport-kde.py:522 #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:1 ../gtk/apport-gtk.ui.h:1 #: ../debian/tmp/usr/share/apport/apport-kde.py:468 #: ../debian/tmp/usr/share/apport/apport-kde.py:503 #: ../debian/tmp/usr/share/apport/apport-kde.py:522 msgid "Apport" msgstr "" #: ../debian/tmp/usr/share/apport/kernel_oops.py:29 ../data/kernel_oops.py:29 msgid "Your system might become unstable now and might need to be restarted." msgstr "" #: ../gtk/apport-gtk.py:157 ../debian/tmp/usr/share/apport/apport-gtk.py:157 #, python-format msgid "Sorry, the application %s has stopped unexpectedly." msgstr "" #: ../gtk/apport-gtk.py:160 ../debian/tmp/usr/share/apport/apport-gtk.py:160 #, python-format msgid "Sorry, %s has closed unexpectedly." msgstr "" #: ../gtk/apport-gtk.py:228 ../debian/tmp/usr/share/apport/apport-gtk.py:228 msgid "Force Closed" msgstr "" #: ../gtk/apport-gtk.py:238 ../debian/tmp/usr/share/apport/apport-gtk.py:238 #, python-format msgid "The application %s has stopped responding." msgstr "" #: ../gtk/apport-gtk.py:242 ../debian/tmp/usr/share/apport/apport-gtk.py:242 #, python-format msgid "The program \"%s\" has stopped responding." msgstr "" #: ../debian/tmp/usr/share/apport/apportcheckresume.py:67 #: ../data/apportcheckresume.py:67 msgid "" "This occurred during a previous suspend, and prevented the system from " "resuming properly." msgstr "" #: ../debian/tmp/usr/share/apport/apportcheckresume.py:69 #: ../data/apportcheckresume.py:69 msgid "" "This occurred during a previous hibernation, and prevented the system from " "resuming properly." msgstr "" #: ../debian/tmp/usr/share/apport/apportcheckresume.py:74 #: ../data/apportcheckresume.py:74 msgid "" "The resume processing hung very near the end and will have appeared to have " "completed normally." msgstr "" #: ../bin/apport-unpack.py:22 ../debian/tmp/usr/bin/apport-unpack.py:22 #, python-format msgid "Usage: %s " msgstr "" #: ../bin/apport-unpack.py:46 ../debian/tmp/usr/bin/apport-unpack.py:46 msgid "Destination directory exists and is not empty." msgstr "" #: ../apport/com.ubuntu.apport.policy.in.h:1 msgid "Collect system information" msgstr "" #: ../apport/com.ubuntu.apport.policy.in.h:2 msgid "" "Authentication is required to collect system information for this problem " "report" msgstr "" #: ../apport/com.ubuntu.apport.policy.in.h:3 msgid "System problem reports" msgstr "" #: ../apport/com.ubuntu.apport.policy.in.h:4 msgid "" "Please enter your password to access problem reports of system programs" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:2 ../gtk/apport-gtk.ui.h:2 msgid "Cancel" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:3 ../gtk/apport-gtk.ui.h:3 msgid "OK" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:4 ../gtk/apport-gtk.ui.h:4 msgid "Crash report" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:5 ../gtk/apport-gtk.ui.h:5 msgid "Sorry, an internal error happened." msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:7 ../gtk/apport-gtk.ui.h:7 msgid "Send an error report to help fix this problem" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:8 ../gtk/apport-gtk.ui.h:8 msgid "Ignore future problems of this program version" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:10 ../gtk/apport-gtk.ui.h:10 msgid "_Examine locally" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:13 ../gtk/apport-gtk.ui.h:13 msgid "Collecting problem information" msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:14 ../gtk/apport-gtk.ui.h:14 msgid "" "Information is being collected that may help the developers fix the problem " "you report." msgstr "" #: ../debian/tmp/usr/share/apport/apport-gtk.ui.h:16 ../gtk/apport-gtk.ui.h:16 msgid "Uploading problem information" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:34 ../bin/apport-retrace.py:34 msgid "Do not put the new traces into the report, but write them to stdout." msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:36 ../bin/apport-retrace.py:36 msgid "" "Start an interactive gdb session with the report's core dump (-o ignored; " "does not rewrite report)" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:38 ../bin/apport-retrace.py:38 msgid "" "Write modified report to given file instead of changing the original report" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:41 ../bin/apport-retrace.py:41 msgid "Remove the core dump from the report after stack trace regeneration" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:43 ../bin/apport-retrace.py:43 msgid "Override report's CoreFile" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:45 ../bin/apport-retrace.py:45 msgid "Override report's ExecutablePath" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:47 ../bin/apport-retrace.py:47 msgid "Override report's ProcMaps" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:49 ../bin/apport-retrace.py:49 msgid "Rebuild report's Package information" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:51 ../bin/apport-retrace.py:51 msgid "" "Build a temporary sandbox and download/install the necessary packages and " "debug symbols in there; without this option it assumes that the necessary " "packages and debug symbols are already installed in the system. The argument " "points to the packaging system configuration base directory; if you specify " "\"system\", it will use the system configuration files, but will then only " "be able to retrace crashes that happened on the currently running release." msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:53 ../bin/apport-retrace.py:53 msgid "" "Report download/install progress when installing packages into sandbox" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:55 ../bin/apport-retrace.py:55 msgid "Prepend timestamps to log messages, for batch operation" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:57 ../bin/apport-retrace.py:57 msgid "" "Create and use third-party repositories from origins specified in reports" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:59 ../bin/apport-retrace.py:59 msgid "Cache directory for packages downloaded in the sandbox" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:61 ../bin/apport-retrace.py:61 msgid "" "Directory for unpacked packages. Future runs will assume that any already " "downloaded package is also extracted to this sandbox." msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:63 #: ../debian/tmp/usr/bin/apport-valgrind.py:66 ../bin/apport-valgrind.py:66 #: ../bin/apport-retrace.py:63 msgid "" "Install an extra package into the sandbox (can be specified multiple times)" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:65 ../bin/apport-retrace.py:65 msgid "" "Path to a file with the crash database authentication information. This is " "used when specifying a crash ID to upload the retraced stack traces (only if " "neither -g, -o, nor -s are specified)" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:67 ../bin/apport-retrace.py:67 msgid "" "Display retraced stack traces and ask for confirmation before sending them " "to the crash database." msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:69 ../bin/apport-retrace.py:69 msgid "" "Path to the duplicate sqlite database (default: no duplicate checking)" msgstr "" #: ../debian/tmp/usr/bin/apport-retrace.py:78 ../bin/apport-retrace.py:78 msgid "You cannot use -C without -S. Stopping." msgstr "" #. translators: don't translate y/n, apport currently only checks for "y" #: ../debian/tmp/usr/bin/apport-retrace.py:111 ../bin/apport-retrace.py:111 msgid "OK to send these as attachments? [y/n]" msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:37 ../bin/apport-valgrind.py:37 msgid "See man page for details." msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:43 ../bin/apport-valgrind.py:43 msgid "specify the log file name produced by valgrind" msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:46 ../bin/apport-valgrind.py:46 msgid "" "reuse a previously created sandbox dir (SDIR) or, if it does not exist, " "create it" msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:50 ../bin/apport-valgrind.py:50 msgid "" "do not create or reuse a sandbox directory for additional debug symbols " "but rely only on installed debug symbols." msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:54 ../bin/apport-valgrind.py:54 msgid "" "reuse a previously created cache dir (CDIR) or, if it does not exist, create " "it" msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:58 ../bin/apport-valgrind.py:58 msgid "" "report download/install progress when installing packages into sandbox" msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:62 ../bin/apport-valgrind.py:62 msgid "" "the executable that is run under valgrind's memcheck tool for memory leak " "detection" msgstr "" #: ../debian/tmp/usr/bin/apport-valgrind.py:97 ../bin/apport-valgrind.py:97 #, python-format msgid "Error: %s is not an executable. Stopping." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:74 ../bin/apport-cli.py:74 msgid "Press any key to continue..." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:81 ../bin/apport-cli.py:81 msgid "What would you like to do? Your options are:" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:85 ../bin/apport-cli.py:85 #, python-format msgid "Please choose (%s):" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:148 ../bin/apport-cli.py:148 #, python-format msgid "(%i bytes)" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:179 ../bin/apport-cli.py:179 msgid "" "After the problem report has been sent, please fill out the form in the\n" "automatically opened web browser." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:182 ../bin/apport-cli.py:182 #, python-format msgid "&Send report (%s)" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:186 ../bin/apport-cli.py:186 msgid "&Examine locally" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:190 ../bin/apport-cli.py:190 msgid "&View report" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:191 ../bin/apport-cli.py:191 msgid "&Keep report file for sending later or copying to somewhere else" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:192 ../bin/apport-cli.py:192 msgid "Cancel and &ignore future crashes of this program version" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:194 #: ../debian/tmp/usr/bin/apport-cli.py:271 #: ../debian/tmp/usr/bin/apport-cli.py:303 #: ../debian/tmp/usr/bin/apport-cli.py:324 ../bin/apport-cli.py:194 #: ../bin/apport-cli.py:271 ../bin/apport-cli.py:303 ../bin/apport-cli.py:324 msgid "&Cancel" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:222 ../bin/apport-cli.py:222 msgid "Problem report file:" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:228 #: ../debian/tmp/usr/bin/apport-cli.py:233 ../bin/apport-cli.py:228 #: ../bin/apport-cli.py:233 msgid "&Confirm" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:232 ../bin/apport-cli.py:232 #, python-format msgid "Error: %s" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:239 ../bin/apport-cli.py:239 msgid "" "The collected information can be sent to the developers to improve the\n" "application. This might take a few minutes." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:252 ../bin/apport-cli.py:252 msgid "" "The collected information is being sent to the bug tracking system.\n" "This might take a few minutes." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:302 ../bin/apport-cli.py:302 msgid "&Done" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:308 ../bin/apport-cli.py:308 msgid "none" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:309 ../bin/apport-cli.py:309 #, python-format msgid "Selected: %s. Multiple choices:" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:325 ../bin/apport-cli.py:325 msgid "Choices:" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:339 ../bin/apport-cli.py:339 msgid "Path to file (Enter to cancel):" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:345 ../bin/apport-cli.py:345 msgid "File does not exist." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:347 ../bin/apport-cli.py:347 msgid "This is a directory." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:353 ../bin/apport-cli.py:353 msgid "To continue, you must visit the following URL:" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:355 ../bin/apport-cli.py:355 msgid "" "You can launch a browser now, or copy this URL into a browser on another " "computer." msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:357 ../bin/apport-cli.py:357 msgid "Launch a browser now" msgstr "" #: ../debian/tmp/usr/bin/apport-cli.py:371 ../bin/apport-cli.py:371 msgid "No pending crash reports. Try --help for more information." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:124 #: ../apport/ui.py:124 msgid "This package does not seem to be installed correctly" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:129 #: ../apport/ui.py:129 #, python-format msgid "" "This is not an official %s package. Please remove any third party package " "and try again." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:146 #: ../apport/ui.py:146 #, python-format msgid "" "You have some obsolete package versions installed. Please upgrade the " "following packages and check if the problem still occurs:\n" "\n" "%s" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:270 #: ../apport/ui.py:270 msgid "unknown program" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:271 #: ../apport/ui.py:271 #, python-format msgid "Sorry, the program \"%s\" closed unexpectedly" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:273 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1312 #: ../apport/ui.py:273 ../apport/ui.py:1312 #, python-format msgid "Problem in %s" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:274 #: ../apport/ui.py:274 msgid "" "Your computer does not have enough free memory to automatically analyze the " "problem and send a report to the developers." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:322 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:330 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:457 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:460 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:661 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1118 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1284 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1288 #: ../apport/ui.py:322 ../apport/ui.py:330 ../apport/ui.py:457 #: ../apport/ui.py:460 ../apport/ui.py:661 ../apport/ui.py:1118 #: ../apport/ui.py:1284 ../apport/ui.py:1288 msgid "Invalid problem report" msgstr "Ungültiger Problem Rapport" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:323 #: ../apport/ui.py:323 msgid "You are not allowed to access this problem report." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:326 #: ../apport/ui.py:326 msgid "Error" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:327 #: ../apport/ui.py:327 msgid "There is not enough disk space available to process this report." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:411 #: ../apport/ui.py:411 msgid "No package specified" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:412 #: ../apport/ui.py:412 msgid "" "You need to specify a package or a PID. See --help for more information." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:435 #: ../apport/ui.py:435 msgid "Permission denied" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:436 #: ../apport/ui.py:436 msgid "" "The specified process does not belong to you. Please run this program as the " "process owner or as root." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:438 #: ../apport/ui.py:438 msgid "Invalid PID" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:439 #: ../apport/ui.py:439 msgid "The specified process ID does not belong to a program." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:458 #: ../apport/ui.py:458 #, python-format msgid "Symptom script %s did not determine an affected package" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:461 #: ../apport/ui.py:461 #, python-format msgid "Package %s does not exist" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:485 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:673 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:678 #: ../apport/ui.py:485 ../apport/ui.py:673 ../apport/ui.py:678 msgid "Cannot create report" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:500 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:546 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:563 #: ../apport/ui.py:500 ../apport/ui.py:546 ../apport/ui.py:563 msgid "Updating problem report" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:501 #: ../apport/ui.py:501 msgid "" "You are not the reporter or subscriber of this problem report, or the report " "is a duplicate or already closed.\n" "\n" "Please create a new report using \"apport-bug\"." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:510 #: ../apport/ui.py:510 msgid "" "You are not the reporter of this problem report. It is much easier to mark a " "bug as a duplicate of another than to move your comments and attachments to " "a new bug.\n" "\n" "Subsequently, we recommend that you file a new bug report using \"apport-" "bug\" and make a comment in this bug about the one you file.\n" "\n" "Do you really want to proceed?" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:547 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:564 #: ../apport/ui.py:547 ../apport/ui.py:564 msgid "No additional information collected." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:615 #: ../apport/ui.py:615 msgid "What kind of problem do you want to report?" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:632 #: ../apport/ui.py:632 msgid "Unknown symptom" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:633 #: ../apport/ui.py:633 #, python-format msgid "The symptom \"%s\" is not known." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:664 #: ../apport/ui.py:664 msgid "" "After closing this message please click on an application window to report a " "problem about it." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:674 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:679 #: ../apport/ui.py:674 ../apport/ui.py:679 msgid "xprop failed to determine process ID of the window" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:693 #: ../apport/ui.py:693 msgid "%prog " msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:695 #: ../apport/ui.py:695 msgid "Specify package name." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:697 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:748 #: ../apport/ui.py:697 ../apport/ui.py:748 msgid "Add an extra tag to the report. Can be specified multiple times." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:727 #: ../apport/ui.py:727 msgid "" "%prog [options] [symptom|pid|package|program path|.apport/.crash file]" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:730 #: ../apport/ui.py:730 msgid "" "Start in bug filing mode. Requires --package and an optional --pid, or just " "a --pid. If neither is given, display a list of known symptoms. (Implied if " "a single argument is given.)" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:732 #: ../apport/ui.py:732 msgid "Click a window as a target for filing a problem report." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:734 #: ../apport/ui.py:734 msgid "Start in bug updating mode. Can take an optional --package." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:736 #: ../apport/ui.py:736 msgid "" "File a bug report about a symptom. (Implied if symptom name is given as only " "argument.)" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:738 #: ../apport/ui.py:738 msgid "" "Specify package name in --file-bug mode. This is optional if a --pid is " "specified. (Implied if package name is given as only argument.)" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:740 #: ../apport/ui.py:740 msgid "" "Specify a running program in --file-bug mode. If this is specified, the bug " "report will contain more information. (Implied if pid is given as only " "argument.)" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:742 #: ../apport/ui.py:742 msgid "The provided pid is a hanging application." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:744 #: ../apport/ui.py:744 #, python-format msgid "" "Report the crash from given .apport or .crash file instead of the pending " "ones in %s. (Implied if file is given as only argument.)" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:746 #: ../apport/ui.py:746 msgid "" "In bug filing mode, save the collected information into a file instead of " "reporting it. This file can then be reported later on from a different " "machine." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:750 #: ../apport/ui.py:750 msgid "Print the Apport version number." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:889 #: ../apport/ui.py:889 msgid "" "This will launch apport-retrace in a terminal window to examine the crash." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:890 #: ../apport/ui.py:890 msgid "Run gdb session" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:891 #: ../apport/ui.py:891 msgid "Run gdb session without downloading debug symbols" msgstr "" #. TRANSLATORS: %s contains the crash report file name #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:893 #: ../apport/ui.py:893 #, python-format msgid "Update %s with fully symbolic stack trace" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:969 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:979 #: ../apport/ui.py:969 ../apport/ui.py:979 msgid "" "This problem report applies to a program which is not installed any more." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:994 #: ../apport/ui.py:994 #, python-format msgid "" "The problem happened with the program %s which changed since the crash " "occurred." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1041 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1075 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1290 #: ../apport/ui.py:1041 ../apport/ui.py:1075 ../apport/ui.py:1290 msgid "This problem report is damaged and cannot be processed." msgstr "" #. package does not exist #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1045 #: ../apport/ui.py:1045 msgid "The report belongs to a package that is not installed." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1049 #: ../apport/ui.py:1049 msgid "An error occurred while attempting to process this problem report:" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1119 #: ../apport/ui.py:1119 msgid "Could not determine the package or source package name." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1137 #: ../apport/ui.py:1137 msgid "Unable to start web browser" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1138 #: ../apport/ui.py:1138 #, python-format msgid "Unable to start web browser to open %s." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1238 #: ../apport/ui.py:1238 #, python-format msgid "Please enter your account information for the %s bug tracking system" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1250 #: ../apport/ui.py:1250 msgid "Network problem" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1252 #: ../apport/ui.py:1252 msgid "" "Cannot connect to crash database, please check your Internet connection." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1279 #: ../apport/ui.py:1279 msgid "Memory exhaustion" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1280 #: ../apport/ui.py:1280 msgid "Your system does not have enough memory to process this crash report." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1315 #: ../apport/ui.py:1315 #, python-format msgid "" "The problem cannot be reported:\n" "\n" "%s" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1371 #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1378 #: ../apport/ui.py:1371 ../apport/ui.py:1378 msgid "Problem already known" msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1372 #: ../apport/ui.py:1372 msgid "" "This problem was already reported in the bug report displayed in the web " "browser. Please check if you can add any further information that might be " "helpful for the developers." msgstr "" #: ../debian/tmp/usr/lib/python2.7/dist-packages/apport/ui.py:1379 #: ../apport/ui.py:1379 msgid "This problem was already reported to developers. Thank you!" msgstr "" #: ../kde/apport-kde-mimelnk.desktop.in.h:1 msgid "Apport crash file" msgstr "" #: ../debian/tmp/usr/share/apport/general-hooks/ubuntu.py:142 #: ../data/general-hooks/ubuntu.py:142 msgid "" "An Ubuntu package has a file conflict with a package that is not a genuine " "Ubuntu package." msgstr "" #: ../debian/tmp/usr/share/apport/general-hooks/ubuntu.py:150 #: ../data/general-hooks/ubuntu.py:150 msgid "You have already encountered this package installation failure." msgstr "" #: ../debian/tmp/usr/share/apport/general-hooks/ubuntu.py:166 #: ../data/general-hooks/ubuntu.py:166 msgid "" "Your system was initially configured with grub version 2, but you have " "removed it from your system in favor of grub 1 without configuring it. To " "ensure your bootloader configuration is updated whenever a new kernel is " "available, open a terminal and run:\n" "\n" " sudo apt-get install grub-pc\n" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/pulseaudio.po0000644000000000000000000017633312734303741020152 0ustar # Low German translation for pulseaudio # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the pulseaudio package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: pulseaudio\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-03-21 10:46+0000\n" "PO-Revision-Date: 2010-06-14 20:16+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Low German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 18:09+0000\n" "X-Generator: Launchpad (build 18115)\n" #: ../src/daemon/cmdline.c:111 #, c-format msgid "" "%s [options]\n" "\n" "COMMANDS:\n" " -h, --help Show this help\n" " --version Show version\n" " --dump-conf Dump default configuration\n" " --dump-modules Dump list of available modules\n" " --dump-resample-methods Dump available resample methods\n" " --cleanup-shm Cleanup stale shared memory " "segments\n" " --start Start the daemon if it is not " "running\n" " -k --kill Kill a running daemon\n" " --check Check for a running daemon (only " "returns exit code)\n" "\n" "OPTIONS:\n" " --system[=BOOL] Run as system-wide instance\n" " -D, --daemonize[=BOOL] Daemonize after startup\n" " --fail[=BOOL] Quit when startup fails\n" " --high-priority[=BOOL] Try to set high nice level\n" " (only available as root, when SUID " "or\n" " with elevated RLIMIT_NICE)\n" " --realtime[=BOOL] Try to enable realtime scheduling\n" " (only available as root, when SUID " "or\n" " with elevated RLIMIT_RTPRIO)\n" " --disallow-module-loading[=BOOL] Disallow module user requested " "module\n" " loading/unloading after startup\n" " --disallow-exit[=BOOL] Disallow user requested exit\n" " --exit-idle-time=SECS Terminate the daemon when idle and " "this\n" " time passed\n" " --scache-idle-time=SECS Unload autoloaded samples when idle " "and\n" " this time passed\n" " --log-level[=LEVEL] Increase or set verbosity level\n" " -v --verbose Increase the verbosity level\n" " --log-target={auto,syslog,stderr,file:PATH,newfile:PATH}\n" " Specify the log target\n" " --log-meta[=BOOL] Include code location in log " "messages\n" " --log-time[=BOOL] Include timestamps in log messages\n" " --log-backtrace=FRAMES Include a backtrace in log messages\n" " -p, --dl-search-path=PATH Set the search path for dynamic " "shared\n" " objects (plugins)\n" " --resample-method=METHOD Use the specified resampling method\n" " (See --dump-resample-methods for\n" " possible values)\n" " --use-pid-file[=BOOL] Create a PID file\n" " --no-cpu-limit[=BOOL] Do not install CPU load limiter on\n" " platforms that support it.\n" " --disable-shm[=BOOL] Disable shared memory support.\n" "\n" "STARTUP SCRIPT:\n" " -L, --load=\"MODULE ARGUMENTS\" Load the specified plugin module " "with\n" " the specified argument\n" " -F, --file=FILENAME Run the specified script\n" " -C Open a command line on the running " "TTY\n" " after startup\n" "\n" " -n Don't load default script file\n" msgstr "" #: ../src/daemon/cmdline.c:243 msgid "--daemonize expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:251 msgid "--fail expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:262 msgid "" "--log-level expects log level argument (either numeric in range 0..4 or one " "of debug, info, notice, warn, error)." msgstr "" #: ../src/daemon/cmdline.c:274 msgid "--high-priority expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:282 msgid "--realtime expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:290 msgid "--disallow-module-loading expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:298 msgid "--disallow-exit expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:306 msgid "--use-pid-file expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:325 msgid "" "Invalid log target: use either 'syslog', 'journal','stderr' or 'auto' or a " "valid file name 'file:', 'newfile:'." msgstr "" #: ../src/daemon/cmdline.c:327 msgid "" "Invalid log target: use either 'syslog', 'stderr' or 'auto' or a valid file " "name 'file:', 'newfile:'." msgstr "" #: ../src/daemon/cmdline.c:335 msgid "--log-time expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:343 msgid "--log-meta expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:363 #, c-format msgid "Invalid resample method '%s'." msgstr "" #: ../src/daemon/cmdline.c:370 msgid "--system expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:378 msgid "--no-cpu-limit expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:386 msgid "--disable-shm expects boolean argument" msgstr "" #: ../src/daemon/daemon-conf.c:259 #, c-format msgid "[%s:%u] Invalid log target '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:274 #, c-format msgid "[%s:%u] Invalid log level '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:289 #, c-format msgid "[%s:%u] Invalid resample method '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:311 #, c-format msgid "[%s:%u] Invalid rlimit '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:331 #, c-format msgid "[%s:%u] Invalid sample format '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:348 ../src/daemon/daemon-conf.c:365 #, c-format msgid "[%s:%u] Invalid sample rate '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:388 #, c-format msgid "[%s:%u] Invalid sample channels '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:405 #, c-format msgid "[%s:%u] Invalid channel map '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:422 #, c-format msgid "[%s:%u] Invalid number of fragments '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:439 #, c-format msgid "[%s:%u] Invalid fragment size '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:456 #, c-format msgid "[%s:%u] Invalid nice level '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:499 #, c-format msgid "[%s:%u] Invalid server type '%s'." msgstr "" #: ../src/daemon/daemon-conf.c:613 #, c-format msgid "Failed to open configuration file: %s" msgstr "" #: ../src/daemon/daemon-conf.c:629 msgid "" "The specified default channel map has a different number of channels than " "the specified default number of channels." msgstr "" #: ../src/daemon/daemon-conf.c:716 #, c-format msgid "### Read from configuration file: %s ###\n" msgstr "" #: ../src/daemon/dumpmodules.c:57 #, c-format msgid "Name: %s\n" msgstr "" #: ../src/daemon/dumpmodules.c:60 #, c-format msgid "No module information available\n" msgstr "" #: ../src/daemon/dumpmodules.c:63 #, c-format msgid "Version: %s\n" msgstr "" #: ../src/daemon/dumpmodules.c:65 #, c-format msgid "Description: %s\n" msgstr "" #: ../src/daemon/dumpmodules.c:67 #, c-format msgid "Author: %s\n" msgstr "" #: ../src/daemon/dumpmodules.c:69 #, c-format msgid "Usage: %s\n" msgstr "" #: ../src/daemon/dumpmodules.c:70 #, c-format msgid "Load Once: %s\n" msgstr "" #: ../src/daemon/dumpmodules.c:72 #, c-format msgid "DEPRECATION WARNING: %s\n" msgstr "" #: ../src/daemon/dumpmodules.c:76 #, c-format msgid "Path: %s\n" msgstr "" #: ../src/daemon/ltdl-bind-now.c:75 #, c-format msgid "Failed to open module %s: %s" msgstr "" #: ../src/daemon/ltdl-bind-now.c:126 msgid "Failed to find original lt_dlopen loader." msgstr "" #: ../src/daemon/ltdl-bind-now.c:131 msgid "Failed to allocate new dl loader." msgstr "" #: ../src/daemon/ltdl-bind-now.c:144 msgid "Failed to add bind-now-loader." msgstr "" #: ../src/daemon/main.c:161 #, c-format msgid "Failed to find user '%s'." msgstr "" #: ../src/daemon/main.c:166 #, c-format msgid "Failed to find group '%s'." msgstr "Künn Grupp '%s' nich finnen." #: ../src/daemon/main.c:175 #, c-format msgid "GID of user '%s' and of group '%s' don't match." msgstr "" #: ../src/daemon/main.c:180 #, c-format msgid "Home directory of user '%s' is not '%s', ignoring." msgstr "" #: ../src/daemon/main.c:183 ../src/daemon/main.c:188 #, c-format msgid "Failed to create '%s': %s" msgstr "" #: ../src/daemon/main.c:195 #, c-format msgid "Failed to change group list: %s" msgstr "" #: ../src/daemon/main.c:211 #, c-format msgid "Failed to change GID: %s" msgstr "" #: ../src/daemon/main.c:227 #, c-format msgid "Failed to change UID: %s" msgstr "" #: ../src/daemon/main.c:256 msgid "System wide mode unsupported on this platform." msgstr "" #: ../src/daemon/main.c:494 msgid "Failed to parse command line." msgstr "" #: ../src/daemon/main.c:533 msgid "" "System mode refused for non-root user. Only starting the D-Bus server lookup " "service." msgstr "" #: ../src/daemon/main.c:632 #, c-format msgid "Failed to kill daemon: %s" msgstr "" #: ../src/daemon/main.c:661 msgid "" "This program is not intended to be run as root (unless --system is " "specified)." msgstr "" #: ../src/daemon/main.c:664 msgid "Root privileges required." msgstr "" #: ../src/daemon/main.c:671 msgid "--start not supported for system instances." msgstr "" #: ../src/daemon/main.c:711 #, c-format msgid "User-configured server at %s, refusing to start/autospawn." msgstr "" #: ../src/daemon/main.c:717 #, c-format msgid "" "User-configured server at %s, which appears to be local. Probing deeper." msgstr "" #: ../src/daemon/main.c:722 msgid "Running in system mode, but --disallow-exit not set." msgstr "" #: ../src/daemon/main.c:725 msgid "Running in system mode, but --disallow-module-loading not set." msgstr "" #: ../src/daemon/main.c:728 msgid "Running in system mode, forcibly disabling SHM mode." msgstr "" #: ../src/daemon/main.c:733 msgid "Running in system mode, forcibly disabling exit idle time." msgstr "" #: ../src/daemon/main.c:766 msgid "Failed to acquire stdio." msgstr "" #: ../src/daemon/main.c:772 ../src/daemon/main.c:843 #, c-format msgid "pipe() failed: %s" msgstr "" #: ../src/daemon/main.c:777 ../src/daemon/main.c:848 #, c-format msgid "fork() failed: %s" msgstr "" #: ../src/daemon/main.c:792 ../src/daemon/main.c:863 ../src/utils/pacat.c:567 #, c-format msgid "read() failed: %s" msgstr "" #: ../src/daemon/main.c:798 msgid "Daemon startup failed." msgstr "" #: ../src/daemon/main.c:831 #, c-format msgid "setsid() failed: %s" msgstr "" #: ../src/daemon/main.c:958 msgid "Failed to get machine ID" msgstr "" #: ../src/daemon/main.c:984 msgid "" "OK, so you are running PA in system mode. Please note that you most likely " "shouldn't be doing that.\n" "If you do it nonetheless then it's your own fault if things don't work as " "expected.\n" "Please read " "http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIs" "WrongWithSystemWide/ for an explanation why system mode is usually a bad " "idea." msgstr "" #: ../src/daemon/main.c:1001 msgid "pa_pid_file_create() failed." msgstr "" #: ../src/daemon/main.c:1031 msgid "pa_core_new() failed." msgstr "" #: ../src/daemon/main.c:1102 msgid "Failed to initialize daemon." msgstr "" #: ../src/daemon/main.c:1107 msgid "Daemon startup without any loaded modules, refusing to work." msgstr "" #: ../src/daemon/pulseaudio.desktop.in.h:1 msgid "PulseAudio Sound System" msgstr "" #: ../src/daemon/pulseaudio.desktop.in.h:2 msgid "Start the PulseAudio Sound System" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2294 msgid "Input" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2295 msgid "Docking Station Input" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2296 msgid "Docking Station Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2297 msgid "Docking Station Line In" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2298 ../src/modules/alsa/alsa-mixer.c:2383 msgid "Line In" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2299 ../src/modules/alsa/alsa-mixer.c:2377 #: ../src/modules/bluetooth/module-bluez4-device.c:2176 #: ../src/modules/bluetooth/module-bluez5-device.c:1937 msgid "Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2300 ../src/modules/alsa/alsa-mixer.c:2378 msgid "Front Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2301 ../src/modules/alsa/alsa-mixer.c:2379 msgid "Rear Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2302 msgid "External Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2303 ../src/modules/alsa/alsa-mixer.c:2381 msgid "Internal Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2304 ../src/modules/alsa/alsa-mixer.c:2384 msgid "Radio" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2305 ../src/modules/alsa/alsa-mixer.c:2385 msgid "Video" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2306 msgid "Automatic Gain Control" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2307 msgid "No Automatic Gain Control" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2308 msgid "Boost" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2309 msgid "No Boost" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2310 msgid "Amplifier" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2311 msgid "No Amplifier" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2312 msgid "Bass Boost" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2313 msgid "No Bass Boost" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2314 #: ../src/modules/bluetooth/module-bluez4-device.c:2181 #: ../src/modules/bluetooth/module-bluez5-device.c:1944 msgid "Speaker" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2315 ../src/modules/alsa/alsa-mixer.c:2387 msgid "Headphones" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2376 msgid "Analog Input" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2380 msgid "Dock Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2382 msgid "Headset Microphone" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2386 msgid "Analog Output" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2388 msgid "LFE on Separate Mono Output" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2389 msgid "Line Out" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2390 msgid "Analog Mono Output" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2391 msgid "Speakers" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2392 msgid "HDMI / DisplayPort" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2393 msgid "Digital Output (S/PDIF)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2394 msgid "Digital Input (S/PDIF)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2395 msgid "Digital Passthrough (S/PDIF)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2506 msgid "Multichannel Input" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:2507 msgid "Multichannel Output" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3901 msgid "Analog Mono" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3902 msgid "Analog Stereo" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3903 msgid "Multichannel" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3904 msgid "Analog Surround 2.1" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3905 msgid "Analog Surround 3.0" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3906 msgid "Analog Surround 3.1" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3907 msgid "Analog Surround 4.0" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3908 msgid "Analog Surround 4.1" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3909 msgid "Analog Surround 5.0" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3910 msgid "Analog Surround 5.1" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3911 msgid "Analog Surround 6.0" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3912 msgid "Analog Surround 6.1" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3913 msgid "Analog Surround 7.0" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3914 msgid "Analog Surround 7.1" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3915 msgid "Digital Stereo (IEC958)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3916 msgid "Digital Passthrough (IEC958)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3917 msgid "Digital Surround 4.0 (IEC958/AC3)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3918 msgid "Digital Surround 5.1 (IEC958/AC3)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3919 msgid "Digital Surround 5.1 (IEC958/DTS)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3920 msgid "Digital Stereo (HDMI)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:3921 msgid "Digital Surround 5.1 (HDMI)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:4052 msgid "Analog Mono Duplex" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:4053 msgid "Analog Stereo Duplex" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:4054 msgid "Digital Stereo Duplex (IEC958)" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:4180 msgid "Multichannel Duplex" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:4055 #: ../src/modules/alsa/module-alsa-card.c:190 #: ../src/modules/bluetooth/module-bluez4-device.c:2372 #: ../src/modules/bluetooth/module-bluez5-device.c:2173 #: ../src/modules/droid/module-droid-card.c:221 msgid "Off" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:4154 #, c-format msgid "%s Output" msgstr "" #: ../src/modules/alsa/alsa-mixer.c:4162 #, c-format msgid "%s Input" msgstr "" #: ../src/modules/alsa/alsa-sink.c:570 #, c-format msgid "" "ALSA woke us up to write new data to the device, but there was actually " "nothing to write.\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers.\n" "We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() " "returned 0 or another value < min_avail." msgstr "" #: ../src/modules/alsa/alsa-sink.c:570 ../src/modules/alsa/alsa-sink.c:747 #, c-format msgid "" "ALSA woke us up to write new data to the device, but there was actually " "nothing to write!\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers.\n" "We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() " "returned 0 or another value < min_avail." msgstr "" #: ../src/modules/alsa/alsa-source.c:529 #, c-format msgid "" "ALSA woke us up to read new data from the device, but there was actually " "nothing to read.\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers.\n" "We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() " "returned 0 or another value < min_avail." msgstr "" #: ../src/modules/alsa/alsa-source.c:529 ../src/modules/alsa/alsa-source.c:680 #, c-format msgid "" "ALSA woke us up to read new data from the device, but there was actually " "nothing to read!\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers.\n" "We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() " "returned 0 or another value < min_avail." msgstr "" #: ../src/modules/alsa/alsa-util.c:1134 ../src/modules/alsa/alsa-util.c:1209 #, c-format msgid "" "snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu " "ms).\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers." msgstr "" #: ../src/modules/alsa/alsa-util.c:1184 #, c-format msgid "" "snd_pcm_delay() returned a value that is exceptionally large: %li bytes " "(%s%lu ms).\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers." msgstr "" #: ../src/modules/alsa/alsa-util.c:1225 #, c-format msgid "" "snd_pcm_avail_delay() returned strange values: delay %lu is less than avail " "%lu.\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers." msgstr "" #: ../src/modules/alsa/alsa-util.c:1268 #, c-format msgid "" "snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes " "(%lu ms).\n" "Most likely this is a bug in the ALSA driver '%s'. Please report this issue " "to the ALSA developers." msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2166 #: ../src/modules/bluetooth/module-bluez5-device.c:1927 msgid "Headset" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2171 #: ../src/modules/bluetooth/module-bluez5-device.c:1932 msgid "Handsfree" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2186 #: ../src/modules/bluetooth/module-bluez5-device.c:1950 msgid "Headphone" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2191 #: ../src/modules/bluetooth/module-bluez5-device.c:1955 msgid "Portable" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2196 #: ../src/modules/bluetooth/module-bluez5-device.c:1960 msgid "Car" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2201 #: ../src/modules/bluetooth/module-bluez5-device.c:1965 msgid "HiFi" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2206 #: ../src/modules/bluetooth/module-bluez5-device.c:1970 msgid "Phone" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2214 #: ../src/modules/bluetooth/module-bluez5-device.c:1922 #: ../src/modules/bluetooth/module-bluez5-device.c:1938 #: ../src/modules/bluetooth/module-bluez5-device.c:1976 msgid "Bluetooth Output" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2217 #: ../src/modules/bluetooth/module-bluez5-device.c:1921 #: ../src/modules/bluetooth/module-bluez5-device.c:1943 #: ../src/modules/bluetooth/module-bluez5-device.c:1949 #: ../src/modules/bluetooth/module-bluez5-device.c:1975 msgid "Bluetooth Input" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2253 msgid "High Fidelity Playback (A2DP)" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2264 msgid "High Fidelity Capture (A2DP)" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2275 msgid "Telephony Duplex (HSP/HFP)" msgstr "" #: ../src/modules/bluetooth/module-bluez4-device.c:2287 msgid "Handsfree Gateway" msgstr "" #: ../src/modules/bluetooth/module-bluez5-device.c:2013 msgid "High Fidelity Playback (A2DP Sink)" msgstr "" #: ../src/modules/bluetooth/module-bluez5-device.c:2024 msgid "High Fidelity Capture (A2DP Source)" msgstr "" #: ../src/modules/bluetooth/module-bluez5-device.c:2035 msgid "Headset Head Unit (HSP/HFP)" msgstr "" #: ../src/modules/bluetooth/module-bluez5-device.c:2047 msgid "Headset Audio Gateway (HSP/HFP)" msgstr "" #: ../src/modules/echo-cancel/module-echo-cancel.c:61 msgid "" "source_name= source_properties= source_master= sink_name= sink_properties= sink_master= adjust_time= adjust_threshold= format= rate= channels= channel_map= " "aec_method= aec_args= " "save_aec= autoloaded= use_volume_sharing= " msgstr "" #. add on profile #: ../src/modules/macosx/module-coreaudio-device.c:754 msgid "On" msgstr "" #. / TRANSLATORS: The app icon and name appears above this string. If the phrase #. / can't be translated in this language, translate the whole sentence #. / 'This app wants to record audio.' #: ../src/modules/trust-store/module-trust-store.c:152 msgid "wants to record audio." msgstr "" #: ../src/modules/module-always-sink.c:36 msgid "Always keeps at least one sink loaded even if it's a null one" msgstr "" #: ../src/modules/module-always-sink.c:80 msgid "Dummy Output" msgstr "Plassholler Utgav" #: ../src/modules/module-equalizer-sink.c:70 msgid "General Purpose Equalizer" msgstr "" #: ../src/modules/module-equalizer-sink.c:74 msgid "" "sink_name= sink_properties= " "sink_master= format= rate= " "channels= channel_map= autoloaded= use_volume_sharing= " msgstr "" #: ../src/modules/module-filter-apply.c:46 msgid "autoclean=" msgstr "" #: ../src/modules/module-ladspa-sink.c:51 msgid "Virtual LADSPA sink" msgstr "" #: ../src/modules/module-ladspa-sink.c:55 msgid "" "sink_name= sink_properties= " "master= format= rate= " "channels= channel_map= plugin= label= control= input_ladspaport_map= output_ladspaport_map= " msgstr "" #: ../src/modules/module-null-sink.c:47 msgid "Clocked NULL sink" msgstr "" #: ../src/modules/module-null-sink.c:278 msgid "Null Output" msgstr "Keene Utgav" #: ../src/modules/module-rygel-media-server.c:508 #: ../src/modules/module-rygel-media-server.c:546 #: ../src/modules/module-rygel-media-server.c:905 msgid "Output Devices" msgstr "" #: ../src/modules/module-rygel-media-server.c:509 #: ../src/modules/module-rygel-media-server.c:547 #: ../src/modules/module-rygel-media-server.c:906 msgid "Input Devices" msgstr "" #: ../src/modules/module-rygel-media-server.c:1063 msgid "Audio on @HOSTNAME@" msgstr "" #. TODO: old tunnel put here the remote sink_name into stream name e.g. 'Null Output for lynxis@lazus' #. TODO: old tunnel put here the remote source_name into stream name e.g. 'Null Output for lynxis@lazus' #: ../src/modules/module-tunnel-sink-new.c:307 #: ../src/modules/module-tunnel-source-new.c:305 #, c-format msgid "Tunnel for %s@%s" msgstr "" #: ../src/modules/module-tunnel-sink-new.c:517 #: ../src/modules/module-tunnel-source-new.c:516 #, c-format msgid "Tunnel to %s/%s" msgstr "" #: ../src/modules/module-virtual-surround-sink.c:47 msgid "Virtual surround sink" msgstr "" #: ../src/modules/module-virtual-surround-sink.c:51 msgid "" "sink_name= sink_properties= " "master= format= rate= " "channels= channel_map= " "use_volume_sharing= force_flat_volume= " "hrir=/path/to/left_hrir.wav " msgstr "" #: ../src/modules/reserve-wrap.c:149 msgid "PulseAudio Sound Server" msgstr "" #: ../src/pulse/channelmap.c:103 ../src/pulse/channelmap.c:758 msgid "Mono" msgstr "" #: ../src/pulse/channelmap.c:105 msgid "Front Center" msgstr "" #: ../src/pulse/channelmap.c:106 msgid "Front Left" msgstr "" #: ../src/pulse/channelmap.c:107 msgid "Front Right" msgstr "" #: ../src/pulse/channelmap.c:109 msgid "Rear Center" msgstr "" #: ../src/pulse/channelmap.c:110 msgid "Rear Left" msgstr "" #: ../src/pulse/channelmap.c:111 msgid "Rear Right" msgstr "" #: ../src/pulse/channelmap.c:113 msgid "Subwoofer" msgstr "" #: ../src/pulse/channelmap.c:115 msgid "Front Left-of-center" msgstr "" #: ../src/pulse/channelmap.c:116 msgid "Front Right-of-center" msgstr "" #: ../src/pulse/channelmap.c:118 msgid "Side Left" msgstr "" #: ../src/pulse/channelmap.c:119 msgid "Side Right" msgstr "" #: ../src/pulse/channelmap.c:121 msgid "Auxiliary 0" msgstr "" #: ../src/pulse/channelmap.c:122 msgid "Auxiliary 1" msgstr "" #: ../src/pulse/channelmap.c:123 msgid "Auxiliary 2" msgstr "" #: ../src/pulse/channelmap.c:124 msgid "Auxiliary 3" msgstr "" #: ../src/pulse/channelmap.c:125 msgid "Auxiliary 4" msgstr "" #: ../src/pulse/channelmap.c:126 msgid "Auxiliary 5" msgstr "" #: ../src/pulse/channelmap.c:127 msgid "Auxiliary 6" msgstr "" #: ../src/pulse/channelmap.c:128 msgid "Auxiliary 7" msgstr "" #: ../src/pulse/channelmap.c:129 msgid "Auxiliary 8" msgstr "" #: ../src/pulse/channelmap.c:130 msgid "Auxiliary 9" msgstr "" #: ../src/pulse/channelmap.c:131 msgid "Auxiliary 10" msgstr "" #: ../src/pulse/channelmap.c:132 msgid "Auxiliary 11" msgstr "" #: ../src/pulse/channelmap.c:133 msgid "Auxiliary 12" msgstr "" #: ../src/pulse/channelmap.c:134 msgid "Auxiliary 13" msgstr "" #: ../src/pulse/channelmap.c:135 msgid "Auxiliary 14" msgstr "" #: ../src/pulse/channelmap.c:136 msgid "Auxiliary 15" msgstr "" #: ../src/pulse/channelmap.c:137 msgid "Auxiliary 16" msgstr "" #: ../src/pulse/channelmap.c:138 msgid "Auxiliary 17" msgstr "" #: ../src/pulse/channelmap.c:139 msgid "Auxiliary 18" msgstr "" #: ../src/pulse/channelmap.c:140 msgid "Auxiliary 19" msgstr "" #: ../src/pulse/channelmap.c:141 msgid "Auxiliary 20" msgstr "" #: ../src/pulse/channelmap.c:142 msgid "Auxiliary 21" msgstr "" #: ../src/pulse/channelmap.c:143 msgid "Auxiliary 22" msgstr "" #: ../src/pulse/channelmap.c:144 msgid "Auxiliary 23" msgstr "" #: ../src/pulse/channelmap.c:145 msgid "Auxiliary 24" msgstr "" #: ../src/pulse/channelmap.c:146 msgid "Auxiliary 25" msgstr "" #: ../src/pulse/channelmap.c:147 msgid "Auxiliary 26" msgstr "" #: ../src/pulse/channelmap.c:148 msgid "Auxiliary 27" msgstr "" #: ../src/pulse/channelmap.c:149 msgid "Auxiliary 28" msgstr "" #: ../src/pulse/channelmap.c:150 msgid "Auxiliary 29" msgstr "" #: ../src/pulse/channelmap.c:151 msgid "Auxiliary 30" msgstr "" #: ../src/pulse/channelmap.c:152 msgid "Auxiliary 31" msgstr "" #: ../src/pulse/channelmap.c:154 msgid "Top Center" msgstr "" #: ../src/pulse/channelmap.c:156 msgid "Top Front Center" msgstr "" #: ../src/pulse/channelmap.c:157 msgid "Top Front Left" msgstr "" #: ../src/pulse/channelmap.c:158 msgid "Top Front Right" msgstr "" #: ../src/pulse/channelmap.c:160 msgid "Top Rear Center" msgstr "" #: ../src/pulse/channelmap.c:161 msgid "Top Rear Left" msgstr "" #: ../src/pulse/channelmap.c:162 msgid "Top Rear Right" msgstr "" #: ../src/pulse/channelmap.c:479 ../src/pulse/format.c:121 #: ../src/pulse/sample.c:175 ../src/pulse/volume.c:294 #: ../src/pulse/volume.c:320 ../src/pulse/volume.c:340 #: ../src/pulse/volume.c:372 ../src/pulse/volume.c:412 #: ../src/pulse/volume.c:431 msgid "(invalid)" msgstr "" #: ../src/pulse/channelmap.c:762 msgid "Stereo" msgstr "" #: ../src/pulse/channelmap.c:767 msgid "Surround 4.0" msgstr "" #: ../src/pulse/channelmap.c:773 msgid "Surround 4.1" msgstr "" #: ../src/pulse/channelmap.c:779 msgid "Surround 5.0" msgstr "" #: ../src/pulse/channelmap.c:785 msgid "Surround 5.1" msgstr "" #: ../src/pulse/channelmap.c:792 msgid "Surround 7.1" msgstr "" #: ../src/pulse/client-conf-x11.c:53 ../src/utils/pax11publish.c:97 msgid "xcb_connect() failed" msgstr "" #: ../src/pulse/client-conf-x11.c:58 ../src/utils/pax11publish.c:102 msgid "xcb_connection_has_error() returned true" msgstr "" #: ../src/pulse/client-conf-x11.c:94 msgid "Failed to parse cookie data" msgstr "" #: ../src/pulse/context.c:656 #, c-format msgid "fork(): %s" msgstr "" #: ../src/pulse/context.c:711 #, c-format msgid "waitpid(): %s" msgstr "" #: ../src/pulse/context.c:1412 #, c-format msgid "Received message for unknown extension '%s'" msgstr "" #: ../src/pulse/direction.c:37 msgid "input" msgstr "" #: ../src/pulse/direction.c:39 msgid "output" msgstr "" #: ../src/pulse/direction.c:41 msgid "bidirectional" msgstr "" #: ../src/pulse/direction.c:43 msgid "invalid" msgstr "" #: ../src/pulsecore/core-util.c:1820 #, c-format msgid "" "XDG_RUNTIME_DIR (%s) is not owned by us (uid %d), but by uid %d! (This could " "e g happen if you try to connect to a non-root PulseAudio as a root user, " "over the native protocol. Don't do that.)" msgstr "" #: ../src/pulsecore/core-util.h:97 msgid "yes" msgstr "" #: ../src/pulsecore/core-util.h:97 msgid "no" msgstr "" #: ../src/pulsecore/lock-autospawn.c:141 ../src/pulsecore/lock-autospawn.c:227 msgid "Cannot access autospawn lock." msgstr "" #: ../src/pulsecore/log.c:153 #, c-format msgid "Failed to open target file '%s'." msgstr "" #: ../src/pulsecore/log.c:176 #, c-format msgid "" "Tried to open target file '%s', '%s.1', '%s.2' ... '%s.%d', but all failed." msgstr "" #: ../src/pulsecore/log.c:631 msgid "Invalid log target." msgstr "" #: ../src/pulsecore/sink.c:3427 msgid "Built-in Audio" msgstr "" #: ../src/pulsecore/sink.c:3432 msgid "Modem" msgstr "Modem" #: ../src/pulse/error.c:38 msgid "OK" msgstr "" #: ../src/pulse/error.c:39 msgid "Access denied" msgstr "" #: ../src/pulse/error.c:40 msgid "Unknown command" msgstr "" #: ../src/pulse/error.c:41 msgid "Invalid argument" msgstr "" #: ../src/pulse/error.c:42 msgid "Entity exists" msgstr "" #: ../src/pulse/error.c:43 msgid "No such entity" msgstr "" #: ../src/pulse/error.c:44 msgid "Connection refused" msgstr "" #: ../src/pulse/error.c:45 msgid "Protocol error" msgstr "" #: ../src/pulse/error.c:46 msgid "Timeout" msgstr "" #: ../src/pulse/error.c:47 msgid "No authentication key" msgstr "" #: ../src/pulse/error.c:48 msgid "Internal error" msgstr "" #: ../src/pulse/error.c:49 msgid "Connection terminated" msgstr "" #: ../src/pulse/error.c:50 msgid "Entity killed" msgstr "" #: ../src/pulse/error.c:51 msgid "Invalid server" msgstr "" #: ../src/pulse/error.c:52 msgid "Module initialization failed" msgstr "" #: ../src/pulse/error.c:53 msgid "Bad state" msgstr "" #: ../src/pulse/error.c:54 msgid "No data" msgstr "" #: ../src/pulse/error.c:55 msgid "Incompatible protocol version" msgstr "" #: ../src/pulse/error.c:56 msgid "Too large" msgstr "" #: ../src/pulse/error.c:57 msgid "Not supported" msgstr "" #: ../src/pulse/error.c:58 msgid "Unknown error code" msgstr "" #: ../src/pulse/error.c:59 msgid "No such extension" msgstr "" #: ../src/pulse/error.c:60 msgid "Obsolete functionality" msgstr "" #: ../src/pulse/error.c:61 msgid "Missing implementation" msgstr "" #: ../src/pulse/error.c:62 msgid "Client forked" msgstr "" #: ../src/pulse/error.c:63 msgid "Input/Output error" msgstr "" #: ../src/pulse/error.c:64 msgid "Device or resource busy" msgstr "" #: ../src/pulse/sample.c:177 #, c-format msgid "%s %uch %uHz" msgstr "" #: ../src/pulse/sample.c:189 #, c-format msgid "%0.1f GiB" msgstr "" #: ../src/pulse/sample.c:191 #, c-format msgid "%0.1f MiB" msgstr "" #: ../src/pulse/sample.c:193 #, c-format msgid "%0.1f KiB" msgstr "" #: ../src/pulse/sample.c:195 #, c-format msgid "%u B" msgstr "" #: ../src/tests/resampler-test.c:255 #, c-format msgid "" "%s [options]\n" "\n" "-h, --help Show this help\n" "-v, --verbose Print debug messages\n" " --from-rate=SAMPLERATE From sample rate in Hz (defaults to " "44100)\n" " --from-format=SAMPLEFORMAT From sample type (defaults to s16le)\n" " --from-channels=CHANNELS From number of channels (defaults to " "1)\n" " --to-rate=SAMPLERATE To sample rate in Hz (defaults to " "44100)\n" " --to-format=SAMPLEFORMAT To sample type (defaults to s16le)\n" " --to-channels=CHANNELS To number of channels (defaults to 1)\n" " --resample-method=METHOD Resample method (defaults to auto)\n" " --seconds=SECONDS From stream duration (defaults to 60)\n" "\n" "If the formats are not specified, the test performs all formats " "combinations,\n" "back and forth.\n" "\n" "Sample type must be one of s16le, s16be, u8, float32le, float32be, ulaw, " "alaw,\n" "s24le, s24be, s24-32le, s24-32be, s32le, s32be (defaults to s16ne)\n" "\n" "See --dump-resample-methods for possible values of resample methods.\n" msgstr "" #: ../src/tests/resampler-test.c:355 #, c-format msgid "%s %s\n" msgstr "" #: ../src/utils/pacat.c:116 #, c-format msgid "Failed to drain stream: %s" msgstr "" #: ../src/utils/pacat.c:121 msgid "Playback stream drained." msgstr "" #: ../src/utils/pacat.c:132 msgid "Draining connection to server." msgstr "" #: ../src/utils/pacat.c:145 #, c-format msgid "pa_stream_drain(): %s" msgstr "" #: ../src/utils/pacat.c:168 #, c-format msgid "pa_stream_write() failed: %s" msgstr "" #: ../src/utils/pacat.c:209 #, c-format msgid "pa_stream_begin_write() failed: %s" msgstr "" #: ../src/utils/pacat.c:259 ../src/utils/pacat.c:289 #, c-format msgid "pa_stream_peek() failed: %s" msgstr "" #: ../src/utils/pacat.c:339 msgid "Stream successfully created." msgstr "" #: ../src/utils/pacat.c:342 #, c-format msgid "pa_stream_get_buffer_attr() failed: %s" msgstr "" #: ../src/utils/pacat.c:346 #, c-format msgid "Buffer metrics: maxlength=%u, tlength=%u, prebuf=%u, minreq=%u" msgstr "" #: ../src/utils/pacat.c:349 #, c-format msgid "Buffer metrics: maxlength=%u, fragsize=%u" msgstr "" #: ../src/utils/pacat.c:353 #, c-format msgid "Using sample spec '%s', channel map '%s'." msgstr "" #: ../src/utils/pacat.c:357 #, c-format msgid "Connected to device %s (index: %u, suspended: %s)." msgstr "" #: ../src/utils/pacat.c:367 #, c-format msgid "Stream error: %s" msgstr "" #: ../src/utils/pacat.c:377 #, c-format msgid "Stream device suspended.%s" msgstr "" #: ../src/utils/pacat.c:379 #, c-format msgid "Stream device resumed.%s" msgstr "" #: ../src/utils/pacat.c:387 #, c-format msgid "Stream underrun.%s" msgstr "" #: ../src/utils/pacat.c:394 #, c-format msgid "Stream overrun.%s" msgstr "" #: ../src/utils/pacat.c:401 #, c-format msgid "Stream started.%s" msgstr "" #: ../src/utils/pacat.c:408 #, c-format msgid "Stream moved to device %s (%u, %ssuspended).%s" msgstr "" #: ../src/utils/pacat.c:408 msgid "not " msgstr "" #: ../src/utils/pacat.c:415 #, c-format msgid "Stream buffer attributes changed.%s" msgstr "" #: ../src/utils/pacat.c:430 msgid "Cork request stack is empty: corking stream" msgstr "" #: ../src/utils/pacat.c:436 msgid "Cork request stack is empty: uncorking stream" msgstr "" #: ../src/utils/pacat.c:441 msgid "Warning: Received more uncork requests than cork requests." msgstr "" #: ../src/utils/pacat.c:465 #, c-format msgid "Connection established.%s" msgstr "" #: ../src/utils/pacat.c:468 #, c-format msgid "pa_stream_new() failed: %s" msgstr "" #: ../src/utils/pacat.c:506 #, c-format msgid "pa_stream_connect_playback() failed: %s" msgstr "" #: ../src/utils/pacat.c:512 #, c-format msgid "Failed to set monitor stream: %s" msgstr "" #: ../src/utils/pacat.c:516 #, c-format msgid "pa_stream_connect_record() failed: %s" msgstr "" #: ../src/utils/pacat.c:529 ../src/utils/pactl.c:1446 #, c-format msgid "Connection failure: %s" msgstr "" #: ../src/utils/pacat.c:562 msgid "Got EOF." msgstr "" #: ../src/utils/pacat.c:599 #, c-format msgid "write() failed: %s" msgstr "" #: ../src/utils/pacat.c:620 msgid "Got signal, exiting." msgstr "" #: ../src/utils/pacat.c:634 #, c-format msgid "Failed to get latency: %s" msgstr "" #: ../src/utils/pacat.c:639 #, c-format msgid "Time: %0.3f sec; Latency: %0.0f usec." msgstr "" #: ../src/utils/pacat.c:660 #, c-format msgid "pa_stream_update_timing_info() failed: %s" msgstr "" #: ../src/utils/pacat.c:671 #, c-format msgid "" "%s [options]\n" "%s\n" "\n" " -h, --help Show this help\n" " --version Show version\n" "\n" " -r, --record Create a connection for recording\n" " -p, --playback Create a connection for playback\n" "\n" " -v, --verbose Enable verbose operations\n" "\n" " -s, --server=SERVER The name of the server to connect " "to\n" " -d, --device=DEVICE The name of the sink/source to " "connect to\n" " -n, --client-name=NAME How to call this client on the " "server\n" " --stream-name=NAME How to call this stream on the " "server\n" " --volume=VOLUME Specify the initial (linear) volume " "in range 0...65536\n" " --rate=SAMPLERATE The sample rate in Hz (defaults to " "44100)\n" " --format=SAMPLEFORMAT The sample type, one of s16le, " "s16be, u8, float32le,\n" " float32be, ulaw, alaw, s32le, s32be, " "s24le, s24be,\n" " s24-32le, s24-32be (defaults to " "s16ne)\n" " --channels=CHANNELS The number of channels, 1 for mono, " "2 for stereo\n" " (defaults to 2)\n" " --channel-map=CHANNELMAP Channel map to use instead of the " "default\n" " --fix-format Take the sample format from the " "sink/source the stream is\n" " being connected to.\n" " --fix-rate Take the sampling rate from the " "sink/source the stream is\n" " being connected to.\n" " --fix-channels Take the number of channels and the " "channel map\n" " from the sink/source the stream is " "being connected to.\n" " --no-remix Don't upmix or downmix channels.\n" " --no-remap Map channels by index instead of " "name.\n" " --latency=BYTES Request the specified latency in " "bytes.\n" " --process-time=BYTES Request the specified process time " "per request in bytes.\n" " --latency-msec=MSEC Request the specified latency in " "msec.\n" " --process-time-msec=MSEC Request the specified process time " "per request in msec.\n" " --property=PROPERTY=VALUE Set the specified property to the " "specified value.\n" " --raw Record/play raw PCM data.\n" " --passthrough Passthrough data.\n" " --file-format[=FFORMAT] Record/play formatted PCM data.\n" " --list-file-formats List available file formats.\n" " --monitor-stream=INDEX Record from the sink input with " "index INDEX.\n" msgstr "" #: ../src/utils/pacat.c:788 msgid "Play back encoded audio files on a PulseAudio sound server." msgstr "" #: ../src/utils/pacat.c:792 msgid "" "Capture audio data from a PulseAudio sound server and write it to a file." msgstr "" #: ../src/utils/pacat.c:796 msgid "" "Capture audio data from a PulseAudio sound server and write it to STDOUT or " "the specified file." msgstr "" #: ../src/utils/pacat.c:800 msgid "" "Play back audio data from STDIN or the specified file on a PulseAudio sound " "server." msgstr "" #: ../src/utils/pacat.c:808 #, c-format msgid "" "pacat %s\n" "Compiled with libpulse %s\n" "Linked with libpulse %s\n" msgstr "" #: ../src/utils/pacat.c:841 ../src/utils/pactl.c:1642 #, c-format msgid "Invalid client name '%s'" msgstr "" #: ../src/utils/pacat.c:856 #, c-format msgid "Invalid stream name '%s'" msgstr "" #: ../src/utils/pacat.c:893 #, c-format msgid "Invalid channel map '%s'" msgstr "" #: ../src/utils/pacat.c:922 ../src/utils/pacat.c:936 #, c-format msgid "Invalid latency specification '%s'" msgstr "" #: ../src/utils/pacat.c:929 ../src/utils/pacat.c:943 #, c-format msgid "Invalid process time specification '%s'" msgstr "" #: ../src/utils/pacat.c:955 #, c-format msgid "Invalid property '%s'" msgstr "" #: ../src/utils/pacat.c:974 #, c-format msgid "Unknown file format %s." msgstr "" #: ../src/utils/pacat.c:989 msgid "Failed to parse the argument for --monitor-stream" msgstr "" #: ../src/utils/pacat.c:1000 msgid "Invalid sample specification" msgstr "" #: ../src/utils/pacat.c:1010 #, c-format msgid "open(): %s" msgstr "" #: ../src/utils/pacat.c:1015 #, c-format msgid "dup2(): %s" msgstr "" #: ../src/utils/pacat.c:1022 msgid "Too many arguments." msgstr "" #: ../src/utils/pacat.c:1033 msgid "Failed to generate sample specification for file." msgstr "" #: ../src/utils/pacat.c:1059 msgid "Failed to open audio file." msgstr "" #: ../src/utils/pacat.c:1065 msgid "" "Warning: specified sample specification will be overwritten with " "specification from file." msgstr "" #: ../src/utils/pacat.c:1068 ../src/utils/pactl.c:1706 msgid "Failed to determine sample specification from file." msgstr "" #: ../src/utils/pacat.c:1077 msgid "Warning: Failed to determine channel map from file." msgstr "" #: ../src/utils/pacat.c:1088 msgid "Channel map doesn't match sample specification" msgstr "" #: ../src/utils/pacat.c:1099 msgid "Warning: failed to write channel map to file." msgstr "" #: ../src/utils/pacat.c:1114 #, c-format msgid "" "Opening a %s stream with sample specification '%s' and channel map '%s'." msgstr "" #: ../src/utils/pacat.c:1115 msgid "recording" msgstr "" #: ../src/utils/pacat.c:1115 msgid "playback" msgstr "" #: ../src/utils/pacat.c:1139 msgid "Failed to set media name." msgstr "" #: ../src/utils/pacat.c:1146 ../src/utils/pactl.c:2056 msgid "pa_mainloop_new() failed." msgstr "" #: ../src/utils/pacat.c:1169 msgid "io_new() failed." msgstr "" #: ../src/utils/pacat.c:1176 ../src/utils/pactl.c:2068 msgid "pa_context_new() failed." msgstr "" #: ../src/utils/pacat.c:1184 ../src/utils/pactl.c:2074 #, c-format msgid "pa_context_connect() failed: %s" msgstr "" #: ../src/utils/pacat.c:1190 msgid "pa_context_rttime_new() failed." msgstr "" #: ../src/utils/pacat.c:1197 ../src/utils/pactl.c:2079 msgid "pa_mainloop_run() failed." msgstr "" #: ../src/utils/pacmd.c:51 ../src/utils/pactl.c:1564 msgid "NAME [ARGS ...]" msgstr "" #: ../src/utils/pacmd.c:52 ../src/utils/pacmd.c:60 ../src/utils/pactl.c:1565 msgid "NAME|#N" msgstr "" #: ../src/utils/pacmd.c:53 ../src/utils/pacmd.c:63 ../src/utils/pactl.c:1563 #: ../src/utils/pactl.c:1569 msgid "NAME" msgstr "" #: ../src/utils/pacmd.c:54 msgid "NAME|#N VOLUME" msgstr "" #: ../src/utils/pacmd.c:55 msgid "#N VOLUME" msgstr "" #: ../src/utils/pacmd.c:56 ../src/utils/pacmd.c:70 ../src/utils/pactl.c:1567 msgid "NAME|#N 1|0" msgstr "" #: ../src/utils/pacmd.c:57 msgid "#N 1|0" msgstr "" #: ../src/utils/pacmd.c:58 msgid "NAME|#N KEY=VALUE" msgstr "" #: ../src/utils/pacmd.c:59 msgid "#N KEY=VALUE" msgstr "" #: ../src/utils/pacmd.c:61 msgid "#N" msgstr "" #: ../src/utils/pacmd.c:62 msgid "NAME SINK|#N" msgstr "" #: ../src/utils/pacmd.c:64 ../src/utils/pacmd.c:65 msgid "NAME FILENAME" msgstr "" #: ../src/utils/pacmd.c:66 msgid "PATHNAME" msgstr "" #: ../src/utils/pacmd.c:67 msgid "FILENAME SINK|#N" msgstr "" #: ../src/utils/pacmd.c:69 ../src/utils/pactl.c:1566 msgid "#N SINK|SOURCE" msgstr "" #: ../src/utils/pacmd.c:71 ../src/utils/pacmd.c:77 ../src/utils/pacmd.c:78 msgid "1|0" msgstr "" #: ../src/utils/pacmd.c:72 ../src/utils/pactl.c:1568 msgid "CARD PROFILE" msgstr "" #: ../src/utils/pacmd.c:73 ../src/utils/pactl.c:1570 msgid "NAME|#N PORT" msgstr "" #: ../src/utils/pacmd.c:74 ../src/utils/pactl.c:1576 msgid "CARD-NAME|CARD-#N PORT OFFSET" msgstr "" #: ../src/utils/pacmd.c:75 msgid "TARGET" msgstr "" #: ../src/utils/pacmd.c:76 msgid "NUMERIC-LEVEL" msgstr "" #: ../src/utils/pacmd.c:79 msgid "FRAMES" msgstr "" #: ../src/utils/pacmd.c:81 #, c-format msgid "" "\n" " -h, --help Show this help\n" " --version Show version\n" "When no command is given pacmd starts in the interactive mode.\n" msgstr "" #: ../src/utils/pacmd.c:128 #, c-format msgid "" "pacmd %s\n" "Compiled with libpulse %s\n" "Linked with libpulse %s\n" msgstr "" #: ../src/utils/pacmd.c:142 msgid "No PulseAudio daemon running, or not running as session daemon." msgstr "" #: ../src/utils/pacmd.c:147 #, c-format msgid "socket(PF_UNIX, SOCK_STREAM, 0): %s" msgstr "" #: ../src/utils/pacmd.c:164 #, c-format msgid "connect(): %s" msgstr "" #: ../src/utils/pacmd.c:172 msgid "Failed to kill PulseAudio daemon." msgstr "" #: ../src/utils/pacmd.c:180 msgid "Daemon not responding." msgstr "" #: ../src/utils/pacmd.c:212 ../src/utils/pacmd.c:321 ../src/utils/pacmd.c:339 #, c-format msgid "write(): %s" msgstr "" #: ../src/utils/pacmd.c:268 #, c-format msgid "poll(): %s" msgstr "" #: ../src/utils/pacmd.c:279 ../src/utils/pacmd.c:299 #, c-format msgid "read(): %s" msgstr "" #: ../src/utils/pactl.c:164 #, c-format msgid "Failed to get statistics: %s" msgstr "" #: ../src/utils/pactl.c:170 #, c-format msgid "Currently in use: %u blocks containing %s bytes total.\n" msgstr "" #: ../src/utils/pactl.c:173 #, c-format msgid "" "Allocated during whole lifetime: %u blocks containing %s bytes total.\n" msgstr "" #: ../src/utils/pactl.c:176 #, c-format msgid "Sample cache size: %s\n" msgstr "" #: ../src/utils/pactl.c:185 #, c-format msgid "Failed to get server information: %s" msgstr "" #: ../src/utils/pactl.c:190 #, c-format msgid "" "Server String: %s\n" "Library Protocol Version: %u\n" "Server Protocol Version: %u\n" "Is Local: %s\n" "Client Index: %u\n" "Tile Size: %zu\n" msgstr "" #: ../src/utils/pactl.c:206 #, c-format msgid "" "User Name: %s\n" "Host Name: %s\n" "Server Name: %s\n" "Server Version: %s\n" "Default Sample Specification: %s\n" "Default Channel Map: %s\n" "Default Sink: %s\n" "Default Source: %s\n" "Cookie: %04x:%04x\n" msgstr "" #: ../src/utils/pactl.c:255 ../src/utils/pactl.c:900 ../src/utils/pactl.c:978 #, c-format msgid "Failed to get sink information: %s" msgstr "" #: ../src/utils/pactl.c:281 #, c-format msgid "" "Sink #%u\n" "\tState: %s\n" "\tName: %s\n" "\tDescription: %s\n" "\tDriver: %s\n" "\tSample Specification: %s\n" "\tChannel Map: %s\n" "\tOwner Module: %u\n" "\tMute: %s\n" "\tVolume: %s\n" "\t balance %0.2f\n" "\tBase Volume: %s\n" "\tMonitor Source: %s\n" "\tLatency: %0.0f usec, configured %0.0f usec\n" "\tFlags: %s%s%s%s%s%s%s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:325 ../src/utils/pactl.c:431 ../src/utils/pactl.c:592 #, c-format msgid "\tPorts:\n" msgstr "" #: ../src/utils/pactl.c:332 ../src/utils/pactl.c:438 #, c-format msgid "\tActive Port: %s\n" msgstr "" #: ../src/utils/pactl.c:338 ../src/utils/pactl.c:444 #, c-format msgid "\tFormats:\n" msgstr "" #: ../src/utils/pactl.c:362 ../src/utils/pactl.c:920 ../src/utils/pactl.c:993 #, c-format msgid "Failed to get source information: %s" msgstr "" #: ../src/utils/pactl.c:388 #, c-format msgid "" "Source #%u\n" "\tState: %s\n" "\tName: %s\n" "\tDescription: %s\n" "\tDriver: %s\n" "\tSample Specification: %s\n" "\tChannel Map: %s\n" "\tOwner Module: %u\n" "\tMute: %s\n" "\tVolume: %s\n" "\t balance %0.2f\n" "\tBase Volume: %s\n" "\tMonitor of Sink: %s\n" "\tLatency: %0.0f usec, configured %0.0f usec\n" "\tFlags: %s%s%s%s%s%s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:416 ../src/utils/pactl.c:486 ../src/utils/pactl.c:529 #: ../src/utils/pactl.c:571 ../src/utils/pactl.c:669 ../src/utils/pactl.c:670 #: ../src/utils/pactl.c:681 ../src/utils/pactl.c:739 ../src/utils/pactl.c:740 #: ../src/utils/pactl.c:751 ../src/utils/pactl.c:802 ../src/utils/pactl.c:803 #: ../src/utils/pactl.c:809 msgid "n/a" msgstr "" #: ../src/utils/pactl.c:455 ../src/utils/pactl.c:859 #, c-format msgid "Failed to get module information: %s" msgstr "" #: ../src/utils/pactl.c:478 #, c-format msgid "" "Module #%u\n" "\tName: %s\n" "\tArgument: %s\n" "\tUsage counter: %s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:497 #, c-format msgid "Failed to get client information: %s" msgstr "" #: ../src/utils/pactl.c:523 #, c-format msgid "" "Client #%u\n" "\tDriver: %s\n" "\tOwner Module: %s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:540 #, c-format msgid "Failed to get card information: %s" msgstr "" #: ../src/utils/pactl.c:563 #, c-format msgid "" "Card #%u\n" "\tName: %s\n" "\tDriver: %s\n" "\tOwner Module: %s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:579 #, c-format msgid "\tProfiles:\n" msgstr "" #: ../src/utils/pactl.c:581 #, c-format msgid "\t\t%s: %s (sinks: %u, sources: %u, priority: %u, available: %s)\n" msgstr "" #: ../src/utils/pactl.c:586 #, c-format msgid "\tActive Profile: %s\n" msgstr "" #: ../src/utils/pactl.c:600 #, c-format msgid "" "\t\t\tProperties:\n" "\t\t\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:605 #, c-format msgid "\t\t\tPart of profile(s): %s" msgstr "" #: ../src/utils/pactl.c:622 ../src/utils/pactl.c:940 ../src/utils/pactl.c:1008 #, c-format msgid "Failed to get sink input information: %s" msgstr "" #: ../src/utils/pactl.c:651 #, c-format msgid "" "Sink Input #%u\n" "\tDriver: %s\n" "\tOwner Module: %s\n" "\tClient: %s\n" "\tSink: %u\n" "\tSample Specification: %s\n" "\tChannel Map: %s\n" "\tFormat: %s\n" "\tCorked: %s\n" "\tMute: %s\n" "\tVolume: %s\n" "\t balance %0.2f\n" "\tBuffer Latency: %0.0f usec\n" "\tSink Latency: %0.0f usec\n" "\tResample method: %s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:692 ../src/utils/pactl.c:960 ../src/utils/pactl.c:1023 #, c-format msgid "Failed to get source output information: %s" msgstr "" #: ../src/utils/pactl.c:721 #, c-format msgid "" "Source Output #%u\n" "\tDriver: %s\n" "\tOwner Module: %s\n" "\tClient: %s\n" "\tSource: %u\n" "\tSample Specification: %s\n" "\tChannel Map: %s\n" "\tFormat: %s\n" "\tCorked: %s\n" "\tMute: %s\n" "\tVolume: %s\n" "\t balance %0.2f\n" "\tBuffer Latency: %0.0f usec\n" "\tSource Latency: %0.0f usec\n" "\tResample method: %s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:762 #, c-format msgid "Failed to get sample information: %s" msgstr "" #: ../src/utils/pactl.c:789 #, c-format msgid "" "Sample #%u\n" "\tName: %s\n" "\tSample Specification: %s\n" "\tChannel Map: %s\n" "\tVolume: %s\n" "\t balance %0.2f\n" "\tDuration: %0.1fs\n" "\tSize: %s\n" "\tLazy: %s\n" "\tFilename: %s\n" "\tProperties:\n" "\t\t%s\n" msgstr "" #: ../src/utils/pactl.c:817 ../src/utils/pactl.c:827 #, c-format msgid "Failure: %s" msgstr "" #: ../src/utils/pactl.c:866 #, c-format msgid "Failed to unload module: Module %s not loaded" msgstr "" #: ../src/utils/pactl.c:884 #, c-format msgid "" "Failed to set volume: You tried to set volumes for %d channels, whereas " "channel/s supported = %d\n" msgstr "" #: ../src/utils/pactl.c:1050 #, c-format msgid "Failed to set format: invalid format string %s" msgstr "" #: ../src/utils/pactl.c:1093 #, c-format msgid "Failed to upload sample: %s" msgstr "" #: ../src/utils/pactl.c:1110 msgid "Premature end of file" msgstr "" #: ../src/utils/pactl.c:1130 msgid "new" msgstr "" #: ../src/utils/pactl.c:1133 msgid "change" msgstr "" #: ../src/utils/pactl.c:1136 msgid "remove" msgstr "" #: ../src/utils/pactl.c:1139 ../src/utils/pactl.c:1174 msgid "unknown" msgstr "" #: ../src/utils/pactl.c:1147 msgid "sink" msgstr "" #: ../src/utils/pactl.c:1150 msgid "source" msgstr "" #: ../src/utils/pactl.c:1153 msgid "sink-input" msgstr "" #: ../src/utils/pactl.c:1156 msgid "source-output" msgstr "" #: ../src/utils/pactl.c:1159 msgid "module" msgstr "" #: ../src/utils/pactl.c:1162 msgid "client" msgstr "" #: ../src/utils/pactl.c:1165 msgid "sample-cache" msgstr "" #: ../src/utils/pactl.c:1168 msgid "server" msgstr "" #: ../src/utils/pactl.c:1171 msgid "card" msgstr "" #: ../src/utils/pactl.c:1180 #, c-format msgid "Event '%s' on %s #%u\n" msgstr "" #: ../src/utils/pactl.c:1452 msgid "Got SIGINT, exiting." msgstr "" #: ../src/utils/pactl.c:1479 msgid "Invalid volume specification" msgstr "" #: ../src/utils/pactl.c:1502 msgid "Volume outside permissible range.\n" msgstr "" #: ../src/utils/pactl.c:1515 msgid "Invalid number of volume specifications.\n" msgstr "" #: ../src/utils/pactl.c:1527 msgid "Inconsistent volume specification.\n" msgstr "" #: ../src/utils/pactl.c:1557 ../src/utils/pactl.c:1558 #: ../src/utils/pactl.c:1559 ../src/utils/pactl.c:1560 #: ../src/utils/pactl.c:1561 ../src/utils/pactl.c:1562 #: ../src/utils/pactl.c:1563 ../src/utils/pactl.c:1564 #: ../src/utils/pactl.c:1565 ../src/utils/pactl.c:1566 #: ../src/utils/pactl.c:1567 ../src/utils/pactl.c:1568 #: ../src/utils/pactl.c:1569 ../src/utils/pactl.c:1570 #: ../src/utils/pactl.c:1571 ../src/utils/pactl.c:1572 #: ../src/utils/pactl.c:1573 ../src/utils/pactl.c:1574 #: ../src/utils/pactl.c:1575 ../src/utils/pactl.c:1576 #: ../src/utils/pactl.c:1577 msgid "[options]" msgstr "" #: ../src/utils/pactl.c:1559 msgid "[TYPE]" msgstr "" #: ../src/utils/pactl.c:1561 msgid "FILENAME [NAME]" msgstr "" #: ../src/utils/pactl.c:1562 msgid "NAME [SINK]" msgstr "" #: ../src/utils/pactl.c:1571 msgid "NAME|#N VOLUME [VOLUME ...]" msgstr "" #: ../src/utils/pactl.c:1572 msgid "#N VOLUME [VOLUME ...]" msgstr "" #: ../src/utils/pactl.c:1573 msgid "NAME|#N 1|0|toggle" msgstr "" #: ../src/utils/pactl.c:1574 msgid "#N 1|0|toggle" msgstr "" #: ../src/utils/pactl.c:1575 msgid "#N FORMATS" msgstr "" #: ../src/utils/pactl.c:1578 #, c-format msgid "" "\n" "The special names @DEFAULT_SINK@, @DEFAULT_SOURCE@ and @DEFAULT_MONITOR@\n" "can be used to specify the default sink, source and monitor.\n" msgstr "" #: ../src/utils/pactl.c:1581 #, c-format msgid "" "\n" " -h, --help Show this help\n" " --version Show version\n" "\n" " -s, --server=SERVER The name of the server to connect " "to\n" " -n, --client-name=NAME How to call this client on the " "server\n" msgstr "" #: ../src/utils/pactl.c:1622 #, c-format msgid "" "pactl %s\n" "Compiled with libpulse %s\n" "Linked with libpulse %s\n" msgstr "" #: ../src/utils/pactl.c:1678 #, c-format msgid "Specify nothing, or one of: %s" msgstr "" #: ../src/utils/pactl.c:1688 msgid "Please specify a sample file to load" msgstr "" #: ../src/utils/pactl.c:1701 msgid "Failed to open sound file." msgstr "" #: ../src/utils/pactl.c:1713 msgid "Warning: Failed to determine sample specification from file." msgstr "" #: ../src/utils/pactl.c:1723 msgid "You have to specify a sample name to play" msgstr "" #: ../src/utils/pactl.c:1735 msgid "You have to specify a sample name to remove" msgstr "" #: ../src/utils/pactl.c:1744 msgid "You have to specify a sink input index and a sink" msgstr "" #: ../src/utils/pactl.c:1754 msgid "You have to specify a source output index and a source" msgstr "" #: ../src/utils/pactl.c:1769 msgid "You have to specify a module name and arguments." msgstr "" #: ../src/utils/pactl.c:1789 msgid "You have to specify a module index or name" msgstr "" #: ../src/utils/pactl.c:1802 msgid "" "You may not specify more than one sink. You have to specify a boolean value." msgstr "" #: ../src/utils/pactl.c:1807 ../src/utils/pactl.c:1827 msgid "Invalid suspend specification." msgstr "" #: ../src/utils/pactl.c:1822 msgid "" "You may not specify more than one source. You have to specify a boolean " "value." msgstr "" #: ../src/utils/pactl.c:1839 msgid "You have to specify a card name/index and a profile name" msgstr "" #: ../src/utils/pactl.c:1850 msgid "You have to specify a sink name/index and a port name" msgstr "" #: ../src/utils/pactl.c:1861 msgid "You have to specify a sink name" msgstr "" #: ../src/utils/pactl.c:1871 msgid "You have to specify a source name/index and a port name" msgstr "" #: ../src/utils/pactl.c:1882 msgid "You have to specify a source name" msgstr "" #: ../src/utils/pactl.c:1892 msgid "You have to specify a sink name/index and a volume" msgstr "" #: ../src/utils/pactl.c:1905 msgid "You have to specify a source name/index and a volume" msgstr "" #: ../src/utils/pactl.c:1918 msgid "You have to specify a sink input index and a volume" msgstr "" #: ../src/utils/pactl.c:1923 msgid "Invalid sink input index" msgstr "" #: ../src/utils/pactl.c:1934 msgid "You have to specify a source output index and a volume" msgstr "" #: ../src/utils/pactl.c:1939 msgid "Invalid source output index" msgstr "" #: ../src/utils/pactl.c:1956 msgid "" "You have to specify a sink name/index and a mute action (0, 1, or 'toggle')" msgstr "" #: ../src/utils/pactl.c:1955 ../src/utils/pactl.c:1970 #: ../src/utils/pactl.c:1990 ../src/utils/pactl.c:2008 msgid "Invalid mute specification" msgstr "" #: ../src/utils/pactl.c:1971 msgid "" "You have to specify a source name/index and a mute action (0, 1, or 'toggle')" msgstr "" #: ../src/utils/pactl.c:1986 msgid "" "You have to specify a sink input index and a mute action (0, 1, or 'toggle')" msgstr "" #: ../src/utils/pactl.c:1985 msgid "Invalid sink input index specification" msgstr "" #: ../src/utils/pactl.c:2004 msgid "" "You have to specify a source output index and a mute action (0, 1, or " "'toggle')" msgstr "" #: ../src/utils/pactl.c:2003 msgid "Invalid source output index specification" msgstr "" #: ../src/utils/pactl.c:2020 msgid "" "You have to specify a sink index and a semicolon-separated list of supported " "formats" msgstr "" #: ../src/utils/pactl.c:2032 msgid "" "You have to specify a card name/index, a port name and a latency offset" msgstr "" #: ../src/utils/pactl.c:2039 msgid "Could not parse latency offset" msgstr "" #: ../src/utils/pactl.c:2051 msgid "No valid command specified." msgstr "" #: ../src/utils/pasuspender.c:79 #, c-format msgid "fork(): %s\n" msgstr "" #: ../src/utils/pasuspender.c:92 #, c-format msgid "execvp(): %s\n" msgstr "" #: ../src/utils/pasuspender.c:111 #, c-format msgid "Failure to resume: %s\n" msgstr "" #: ../src/utils/pasuspender.c:145 #, c-format msgid "Failure to suspend: %s\n" msgstr "" #: ../src/utils/pasuspender.c:170 #, c-format msgid "WARNING: Sound server is not local, not suspending.\n" msgstr "" #: ../src/utils/pasuspender.c:183 #, c-format msgid "Connection failure: %s\n" msgstr "" #: ../src/utils/pasuspender.c:201 #, c-format msgid "Got SIGINT, exiting.\n" msgstr "" #: ../src/utils/pasuspender.c:219 #, c-format msgid "WARNING: Child process terminated by signal %u\n" msgstr "" #: ../src/utils/pasuspender.c:228 #, c-format msgid "" "%s [options] ... \n" "\n" " -h, --help Show this help\n" " --version Show version\n" " -s, --server=SERVER The name of the server to connect " "to\n" "\n" msgstr "" #: ../src/utils/pasuspender.c:266 #, c-format msgid "" "pasuspender %s\n" "Compiled with libpulse %s\n" "Linked with libpulse %s\n" msgstr "" #: ../src/utils/pasuspender.c:295 #, c-format msgid "pa_mainloop_new() failed.\n" msgstr "" #: ../src/utils/pasuspender.c:308 #, c-format msgid "pa_context_new() failed.\n" msgstr "" #: ../src/utils/pasuspender.c:320 #, c-format msgid "pa_mainloop_run() failed.\n" msgstr "" #: ../src/utils/pax11publish.c:58 #, c-format msgid "" "%s [-D display] [-S server] [-O sink] [-I source] [-c file] [-d|-e|-i|-r]\n" "\n" " -d Show current PulseAudio data attached to X11 display (default)\n" " -e Export local PulseAudio data to X11 display\n" " -i Import PulseAudio data from X11 display to local environment " "variables and cookie file.\n" " -r Remove PulseAudio data from X11 display\n" msgstr "" #: ../src/utils/pax11publish.c:91 #, c-format msgid "Failed to parse command line.\n" msgstr "" #: ../src/utils/pax11publish.c:110 #, c-format msgid "Server: %s\n" msgstr "" #: ../src/utils/pax11publish.c:112 #, c-format msgid "Source: %s\n" msgstr "" #: ../src/utils/pax11publish.c:114 #, c-format msgid "Sink: %s\n" msgstr "" #: ../src/utils/pax11publish.c:116 #, c-format msgid "Cookie: %s\n" msgstr "" #: ../src/utils/pax11publish.c:134 #, c-format msgid "Failed to parse cookie data\n" msgstr "" #: ../src/utils/pax11publish.c:139 #, c-format msgid "Failed to save cookie data\n" msgstr "" #: ../src/utils/pax11publish.c:168 #, c-format msgid "Failed to get FQDN.\n" msgstr "" #: ../src/utils/pax11publish.c:188 #, c-format msgid "Failed to load cookie data\n" msgstr "" #: ../src/utils/pax11publish.c:206 #, c-format msgid "Not yet implemented.\n" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/ecryptfs-utils.po0000644000000000000000000000336012734303741020762 0ustar # Low German translation for ecryptfs-utils # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the ecryptfs-utils package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: ecryptfs-utils\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-02-27 00:09+0000\n" "PO-Revision-Date: 2011-08-21 18:00+0000\n" "Last-Translator: Jens Dodenhoff \n" "Language-Team: Low German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 18:21+0000\n" "X-Generator: Launchpad (build 18115)\n" #. Name #: ../src/desktop/ecryptfs-record-passphrase:1 msgid "Record your encryption passphrase" msgstr "" #. Description #: ../src/desktop/ecryptfs-record-passphrase:8 msgid "" "To encrypt your home directory or \"Private\" folder, a strong passphrase " "has been automatically generated. Usually your directory is unlocked with " "your user password, but if you ever need to manually recover this directory, " "you will need this passphrase. Please print or write it down and store it in " "a safe location. If you click \"Run this action now\", enter your login " "password at the \"Passphrase\" prompt and you can display your randomly " "generated passphrase. Otherwise, you will need to run \"ecryptfs-unwrap-" "passphrase\" from the command line to retrieve and record your generated " "passphrase." msgstr "" #: ../src/desktop/ecryptfs-mount-private.desktop.in.h:1 msgid "Access Your Private Data" msgstr "Griep op dien privaten Saken to" #: ../src/desktop/ecryptfs-setup-private.desktop.in.h:1 msgid "Setup Your Encrypted Private Directory" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/coreutils.po0000644000000000000000000076031712734303741020012 0ustar # German, Low translation for coreutils # Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007 # This file is distributed under the same license as the coreutils package. # FIRST AUTHOR , 2007. # msgid "" msgstr "" "Project-Id-Version: coreutils\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2016-01-20 10:34+0000\n" "PO-Revision-Date: 2007-09-22 14:55+0000\n" "Last-Translator: sfan \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2016-06-27 16:08+0000\n" "X-Generator: Launchpad (build 18115)\n" #: lib/argmatch.c:133 #, c-format msgid "invalid argument %s for %s" msgstr "Ungültiges Argument %s für %s" #: lib/argmatch.c:134 #, c-format msgid "ambiguous argument %s for %s" msgstr "" #: lib/argmatch.c:153 msgid "Valid arguments are:" msgstr "" #: lib/closein.c:100 msgid "error closing file" msgstr "" #: lib/closeout.c:112 src/base64.c:112 src/base64.c:124 src/base64.c:130 #: src/base64.c:171 src/base64.c:227 src/cat.c:186 src/cat.c:202 src/cat.c:286 #: src/cksum.c:251 src/expand.c:329 src/expand.c:354 src/head.c:297 #: src/head.c:347 src/head.c:763 src/head.c:804 src/mktemp.c:351 src/od.c:925 #: src/paste.c:160 src/shuf.c:368 src/split.c:741 src/split.c:978 #: src/split.c:983 src/tail.c:349 src/tail.c:1201 src/tail.c:1307 #: src/tail.c:2204 src/tr.c:1620 src/tr.c:1845 src/tr.c:1939 #: src/unexpand.c:426 src/unexpand.c:442 #, c-format msgid "write error" msgstr "Schreibfehler" #: lib/copy-acl.c:611 src/copy.c:1165 src/copy.c:2617 #, c-format msgid "preserving permissions for %s" msgstr "" #: lib/error.c:188 msgid "Unknown system error" msgstr "Unbekannter Systemfehler" #: lib/file-type.c:38 msgid "regular empty file" msgstr "" #: lib/file-type.c:38 msgid "regular file" msgstr "" #: lib/file-type.c:41 msgid "directory" msgstr "" #: lib/file-type.c:53 msgid "symbolic link" msgstr "" #: lib/file-type.c:59 msgid "message queue" msgstr "" #: lib/file-type.c:62 msgid "semaphore" msgstr "" #: lib/file-type.c:65 msgid "shared memory object" msgstr "" #: lib/file-type.c:68 msgid "typed memory object" msgstr "" #: lib/file-type.c:44 msgid "block special file" msgstr "" #: lib/file-type.c:47 msgid "character special file" msgstr "" #: lib/file-type.c:72 msgid "contiguous data" msgstr "" #: lib/file-type.c:50 msgid "fifo" msgstr "" #: lib/file-type.c:78 msgid "door" msgstr "" #: lib/file-type.c:81 msgid "multiplexed block special file" msgstr "" #: lib/file-type.c:84 msgid "multiplexed character special file" msgstr "" #: lib/file-type.c:87 msgid "multiplexed file" msgstr "" #: lib/file-type.c:90 msgid "named file" msgstr "" #: lib/file-type.c:93 msgid "network special file" msgstr "" #: lib/file-type.c:96 msgid "migrated file with data" msgstr "" #: lib/file-type.c:99 msgid "migrated file without data" msgstr "" #: lib/file-type.c:102 msgid "port" msgstr "" #: lib/file-type.c:56 msgid "socket" msgstr "" #: lib/file-type.c:108 msgid "whiteout" msgstr "" #: lib/file-type.c:70 msgid "weird file" msgstr "" #: lib/gai_strerror.c:57 msgid "Address family for hostname not supported" msgstr "" #: lib/gai_strerror.c:58 msgid "Temporary failure in name resolution" msgstr "" #: lib/gai_strerror.c:59 msgid "Bad value for ai_flags" msgstr "" #: lib/gai_strerror.c:60 msgid "Non-recoverable failure in name resolution" msgstr "" #: lib/gai_strerror.c:61 msgid "ai_family not supported" msgstr "" #: lib/gai_strerror.c:62 msgid "Memory allocation failure" msgstr "" #: lib/gai_strerror.c:63 msgid "No address associated with hostname" msgstr "" #: lib/gai_strerror.c:64 msgid "Name or service not known" msgstr "" #: lib/gai_strerror.c:65 msgid "Servname not supported for ai_socktype" msgstr "" #: lib/gai_strerror.c:66 msgid "ai_socktype not supported" msgstr "" #: lib/gai_strerror.c:67 msgid "System error" msgstr "" #: lib/gai_strerror.c:68 msgid "Argument buffer too small" msgstr "" #: lib/gai_strerror.c:70 msgid "Processing request in progress" msgstr "" #: lib/gai_strerror.c:71 msgid "Request canceled" msgstr "" #: lib/gai_strerror.c:72 msgid "Request not canceled" msgstr "" #: lib/gai_strerror.c:73 msgid "All requests done" msgstr "" #: lib/gai_strerror.c:74 msgid "Interrupted by a signal" msgstr "" #: lib/gai_strerror.c:75 msgid "Parameter string not correctly encoded" msgstr "" #: lib/gai_strerror.c:87 msgid "Unknown error" msgstr "" #: lib/getopt.c:547 lib/getopt.c:576 #, c-format msgid "%s: option '%s' is ambiguous; possibilities:" msgstr "" #: lib/getopt.c:619 #, c-format msgid "%s: option '%s' is ambiguous\n" msgstr "" #: lib/getopt.c:624 lib/getopt.c:628 #, c-format msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "" #: lib/getopt.c:637 lib/getopt.c:642 #, c-format msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "" #: lib/getopt.c:685 lib/getopt.c:704 #, c-format msgid "%s: option '--%s' requires an argument\n" msgstr "" #: lib/getopt.c:742 lib/getopt.c:745 #, c-format msgid "%s: unrecognized option '--%s'\n" msgstr "" #: lib/getopt.c:753 lib/getopt.c:756 #, c-format msgid "%s: unrecognized option '%c%s'\n" msgstr "" #: lib/getopt.c:805 lib/getopt.c:808 #, c-format msgid "%s: invalid option -- '%c'\n" msgstr "" #: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "" #: lib/getopt.c:934 lib/getopt.c:950 #, c-format msgid "%s: option '-W %s' is ambiguous\n" msgstr "" #: lib/getopt.c:974 lib/getopt.c:992 #, c-format msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "" #: lib/getopt.c:1013 lib/getopt.c:1031 #, c-format msgid "%s: option '-W %s' requires an argument\n" msgstr "" #: lib/mkdir-p.c:196 src/install.c:484 #, c-format msgid "cannot change permissions of %s" msgstr "" #: lib/mkdir-p.c:206 src/copy.c:2266 src/install.c:709 src/install.c:722 #, c-format msgid "cannot create directory %s" msgstr "" #: lib/obstack.c:413 lib/obstack.c:415 lib/xalloc-die.c:34 src/csplit.c:219 #: src/split.c:929 src/tac.c:434 #, c-format msgid "memory exhausted" msgstr "" #: lib/openat-die.c:38 #, c-format msgid "unable to record current working directory" msgstr "" #: lib/openat-die.c:57 src/find-mount-point.c:107 #, c-format msgid "failed to return to initial working directory" msgstr "" #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". For example, a French Unicode local should translate #. these to U+00AB (LEFT-POINTING DOUBLE ANGLE #. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE #. QUOTATION MARK), respectively. #. #. If the catalog has no translation, we will try to #. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and #. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the #. current locale is not Unicode, locale_quoting_style #. will quote 'like this', and clocale_quoting_style will #. quote "like this". You should always include translations #. for "`" and "'" even if U+2018 and U+2019 are appropriate #. for your locale. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: lib/quotearg.c:312 msgid "`" msgstr "" #: lib/quotearg.c:313 msgid "'" msgstr "" #: lib/randread.c:128 #, c-format msgid "%s: end of file" msgstr "" #: src/du.c:1026 src/md5sum.c:608 src/od.c:909 src/tac.c:238 src/tac.c:349 #: src/tac.c:505 src/tac.c:585 src/wc.c:733 #, c-format msgid "%s: read error" msgstr "" #: lib/regcomp.c:131 msgid "Success" msgstr "" #: lib/regcomp.c:134 msgid "No match" msgstr "" #: lib/regcomp.c:137 msgid "Invalid regular expression" msgstr "" #: lib/regcomp.c:140 msgid "Invalid collation character" msgstr "" #: lib/regcomp.c:143 msgid "Invalid character class name" msgstr "" #: lib/regcomp.c:146 msgid "Trailing backslash" msgstr "" #: lib/regcomp.c:149 msgid "Invalid back reference" msgstr "" #: lib/regcomp.c:152 msgid "Unmatched [ or [^" msgstr "" #: lib/regcomp.c:155 msgid "Unmatched ( or \\(" msgstr "" #: lib/regcomp.c:158 msgid "Unmatched \\{" msgstr "" #: lib/regcomp.c:161 msgid "Invalid content of \\{\\}" msgstr "" #: lib/regcomp.c:164 msgid "Invalid range end" msgstr "" #: lib/regcomp.c:167 msgid "Memory exhausted" msgstr "" #: lib/regcomp.c:170 msgid "Invalid preceding regular expression" msgstr "" #: lib/regcomp.c:173 msgid "Premature end of regular expression" msgstr "" #: lib/regcomp.c:176 msgid "Regular expression too big" msgstr "" #: lib/regcomp.c:179 msgid "Unmatched ) or \\)" msgstr "" #: lib/regcomp.c:704 msgid "No previous regular expression" msgstr "" #: lib/root-dev-ino.h:37 #, c-format msgid "it is dangerous to operate recursively on %s" msgstr "" #: lib/root-dev-ino.h:41 #, c-format msgid "it is dangerous to operate recursively on %s (same as %s)" msgstr "" #: lib/root-dev-ino.h:43 #, c-format msgid "use --no-preserve-root to override this failsafe" msgstr "" #. TRANSLATORS: A regular expression testing for an affirmative answer #. (english: "yes"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^yesexpr=' #: lib/rpmatch.c:147 msgid "^[yY]" msgstr "" #. TRANSLATORS: A regular expression testing for a negative answer #. (english: "no"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^noexpr=' #: lib/rpmatch.c:160 msgid "^[nN]" msgstr "" #: lib/set-mode-acl.c:697 src/copy.c:2289 src/cp.c:516 #, c-format msgid "setting permissions for %s" msgstr "" #: lib/siglist.h:31 msgid "Hangup" msgstr "" #: lib/siglist.h:34 msgid "Interrupt" msgstr "" #: lib/siglist.h:37 msgid "Quit" msgstr "" #: lib/siglist.h:40 msgid "Illegal instruction" msgstr "" #: lib/siglist.h:43 msgid "Trace/breakpoint trap" msgstr "" #: lib/siglist.h:46 msgid "Aborted" msgstr "" #: lib/siglist.h:49 msgid "Floating point exception" msgstr "" #: lib/siglist.h:52 msgid "Killed" msgstr "" #: lib/siglist.h:55 msgid "Bus error" msgstr "" #: lib/siglist.h:58 msgid "Segmentation fault" msgstr "" #: lib/siglist.h:61 msgid "Broken pipe" msgstr "" #: lib/siglist.h:64 msgid "Alarm clock" msgstr "" #: lib/siglist.h:67 msgid "Terminated" msgstr "" #: lib/siglist.h:70 msgid "Urgent I/O condition" msgstr "" #: lib/siglist.h:73 msgid "Stopped (signal)" msgstr "" #: lib/siglist.h:76 msgid "Stopped" msgstr "" #: lib/siglist.h:79 msgid "Continued" msgstr "" #: lib/siglist.h:82 msgid "Child exited" msgstr "" #: lib/siglist.h:85 msgid "Stopped (tty input)" msgstr "" #: lib/siglist.h:88 msgid "Stopped (tty output)" msgstr "" #: lib/siglist.h:91 msgid "I/O possible" msgstr "" #: lib/siglist.h:94 msgid "CPU time limit exceeded" msgstr "" #: lib/siglist.h:97 msgid "File size limit exceeded" msgstr "" #: lib/siglist.h:100 msgid "Virtual timer expired" msgstr "" #: lib/siglist.h:103 msgid "Profiling timer expired" msgstr "" #: lib/siglist.h:106 msgid "Window changed" msgstr "" #: lib/siglist.h:109 msgid "User defined signal 1" msgstr "" #: lib/siglist.h:112 msgid "User defined signal 2" msgstr "" #: lib/siglist.h:117 msgid "EMT trap" msgstr "" #: lib/siglist.h:120 msgid "Bad system call" msgstr "" #: lib/siglist.h:123 msgid "Stack fault" msgstr "" #: lib/siglist.h:126 msgid "Information request" msgstr "" #: lib/siglist.h:128 msgid "Power failure" msgstr "" #: lib/siglist.h:131 msgid "Resource lost" msgstr "" #: lib/strsignal.c:114 #, c-format msgid "Real-time signal %d" msgstr "" #: lib/strsignal.c:118 #, c-format msgid "Unknown signal %d" msgstr "" #: lib/unicodeio.c:102 msgid "iconv function not usable" msgstr "" #: lib/unicodeio.c:104 msgid "iconv function not available" msgstr "" #: lib/unicodeio.c:111 msgid "character out of range" msgstr "" #: lib/unicodeio.c:181 #, c-format msgid "cannot convert U+%04X to local character set" msgstr "" #: lib/unicodeio.c:183 #, c-format msgid "cannot convert U+%04X to local character set: %s" msgstr "" #: lib/userspec.c:106 msgid "invalid user" msgstr "" #: lib/userspec.c:107 msgid "invalid group" msgstr "" #: lib/userspec.c:108 msgid "invalid spec" msgstr "" #: lib/verror.c:73 #, c-format msgid "unable to display error message" msgstr "" #: lib/version-etc.c:74 #, c-format msgid "Packaged by %s (%s)\n" msgstr "" #: lib/version-etc.c:77 #, c-format msgid "Packaged by %s\n" msgstr "" #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. #: lib/version-etc.c:84 msgid "(C)" msgstr "" #: lib/version-etc.c:86 msgid "" "\n" "License GPLv3+: GNU GPL version 3 or later " ".\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" "\n" msgstr "" #. TRANSLATORS: %s denotes an author name. #: lib/version-etc.c:102 #, c-format msgid "Written by %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #: lib/version-etc.c:106 #, c-format msgid "Written by %s and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #: lib/version-etc.c:110 #, c-format msgid "Written by %s, %s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:117 #, c-format msgid "" "Written by %s, %s, %s,\n" "and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:124 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:131 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:139 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:147 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:156 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:167 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s, and others.\n" msgstr "" #. TRANSLATORS: The placeholder indicates the bug-reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the address for translation #. bugs (typically your translation team's web or email address). #: lib/version-etc.c:245 #, c-format msgid "" "\n" "Report bugs to: %s\n" msgstr "" #: lib/version-etc.c:247 #, c-format msgid "Report %s bugs to: %s\n" msgstr "" #: lib/version-etc.c:251 src/system.h:573 #, c-format msgid "%s home page: <%s>\n" msgstr "" #: lib/version-etc.c:253 #, c-format msgid "%s home page: \n" msgstr "" #: lib/version-etc.c:256 src/system.h:574 msgid "General help using GNU software: \n" msgstr "" #: lib/xfreopen.c:35 msgid "stdin" msgstr "" #: lib/xfreopen.c:36 msgid "stdout" msgstr "" #: lib/xfreopen.c:37 msgid "stderr" msgstr "" #: lib/xfreopen.c:38 msgid "unknown stream" msgstr "" #: lib/xfreopen.c:39 #, c-format msgid "failed to reopen %s with mode %s" msgstr "" #: lib/xmemcoll.c:39 src/expr.c:886 #, c-format msgid "string comparison failed" msgstr "" #: lib/xmemcoll.c:40 #, c-format msgid "Set LC_ALL='C' to work around the problem." msgstr "" #: lib/xmemcoll.c:42 #, c-format msgid "The strings compared were %s and %s." msgstr "" #: lib/xprintf.c:50 lib/xprintf.c:76 #, c-format msgid "cannot perform formatted output" msgstr "" #: lib/xstrtol-error.c:63 #, c-format msgid "invalid %s%s argument '%s'" msgstr "" #: lib/xstrtol-error.c:68 #, c-format msgid "invalid suffix in %s%s argument '%s'" msgstr "" #: lib/xstrtol-error.c:72 #, c-format msgid "%s%s argument '%s' too large" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/base64.c:40 msgid "Simon Josefsson" msgstr "" #: src/base64.c:64 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]\n" "Base%d encode or decode FILE, or standard input, to standard output.\n" msgstr "" #: src/base64.c:67 msgid "" " -d, --decode decode data\n" " -i, --ignore-garbage when decoding, ignore non-alphabet characters\n" " -w, --wrap=COLS wrap encoded lines after COLS character (default " "76).\n" " Use 0 to disable line wrapping\n" "\n" msgstr "" #: src/base64.c:81 #, c-format msgid "" "\n" "The data are encoded as described for the %s alphabet in RFC 4648.\n" "When decoding, the input may contain newlines in addition to the bytes of\n" "the formal %s alphabet. Use --ignore-garbage to attempt to recover\n" "from any other non-alphabet bytes in the encoded stream.\n" msgstr "" #: src/base64.c:174 src/base64.c:211 src/csplit.c:263 src/csplit.c:1437 #: src/join.c:451 src/shuf.c:156 src/shuf.c:360 src/tac-pipe.c:74 #: src/tee.c:204 src/tr.c:1644 #, c-format msgid "read error" msgstr "" #: src/base64.c:230 #, c-format msgid "invalid input" msgstr "" #: src/base64.c:293 msgid "invalid wrap size" msgstr "" #: src/base64.c:286 src/basename.c:174 src/comm.c:435 src/cp.c:605 #: src/date.c:445 src/dircolors.c:447 src/du.c:964 src/hostid.c:74 #: src/hostname.c:111 src/id.c:169 src/install.c:930 src/join.c:961 #: src/link.c:85 src/ln.c:563 src/logname.c:71 src/mknod.c:156 src/mv.c:449 #: src/nproc.c:119 src/od.c:1808 src/ptx.c:2080 src/seq.c:546 src/shuf.c:319 #: src/shuf.c:338 src/sort.c:4531 src/split.c:1326 src/tr.c:1797 #: src/tsort.c:555 src/tty.c:112 src/uname.c:251 src/uniq.c:453 src/uniq.c:470 #: src/unlink.c:81 src/uptime.c:250 src/users.c:146 src/wc.c:666 src/who.c:827 #: src/whoami.c:79 #, c-format msgid "extra operand %s" msgstr "" #: src/base64.c:318 src/cat.c:781 #, c-format msgid "closing standard input" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/basename.c:29 src/chgrp.c:37 src/chmod.c:39 src/chown.c:36 #: src/comm.c:38 src/cp.c:57 src/csplit.c:42 src/cut.c:45 src/date.c:39 #: src/dd.c:45 src/df.c:43 src/dirname.c:32 src/du.c:54 src/env.c:33 #: src/expand.c:49 src/fold.c:36 src/groups.c:35 src/head.c:45 src/id.c:39 #: src/install.c:50 src/ln.c:42 src/ls.c:124 src/mkdir.c:36 src/mkfifo.c:33 #: src/mknod.c:34 src/mv.c:42 src/nice.c:39 src/nl.c:41 src/paste.c:53 #: src/pathchk.c:33 src/pinky.c:37 src/printenv.c:44 src/printf.c:63 #: src/rm.c:42 src/rmdir.c:38 src/stty.c:66 src/sum.c:38 src/tac.c:59 #: src/tail.c:70 src/tee.c:36 src/touch.c:44 src/tty.c:43 src/uname.c:60 #: src/unexpand.c:50 src/uniq.c:42 src/uptime.c:46 src/users.c:36 src/wc.c:51 #: src/who.c:49 src/yes.c:32 msgid "David MacKenzie" msgstr "" #: src/basename.c:48 #, c-format msgid "" "Usage: %s NAME [SUFFIX]\n" " or: %s OPTION... NAME...\n" msgstr "" #: src/basename.c:53 msgid "" "Print NAME with any leading directory components removed.\n" "If specified, also remove a trailing SUFFIX.\n" msgstr "" #: src/basename.c:60 msgid "" " -a, --multiple support multiple arguments and treat each as a NAME\n" " -s, --suffix=SUFFIX remove a trailing SUFFIX; implies -a\n" " -z, --zero end each output line with NUL, not newline\n" msgstr "" #: src/basename.c:67 #, c-format msgid "" "\n" "Examples:\n" " %s /usr/bin/sort -> \"sort\"\n" " %s include/stdio.h .h -> \"stdio\"\n" " %s -s .h include/stdio.h -> \"stdio\"\n" " %s -a any/str1 any/str2 -> \"str1\" followed by \"str2\"\n" msgstr "" #: src/basename.c:168 src/chcon.c:537 src/chgrp.c:277 src/chmod.c:526 #: src/chown.c:280 src/chroot.c:197 src/comm.c:427 src/csplit.c:1371 #: src/dirname.c:116 src/expr.c:326 src/join.c:1147 src/link.c:77 #: src/mkdir.c:182 src/mkfifo.c:107 src/mknod.c:145 src/nohup.c:111 #: src/pathchk.c:148 src/printf.c:674 src/readlink.c:145 src/realpath.c:236 #: src/rm.c:321 src/rmdir.c:223 src/seq.c:540 src/setuidgid.c:137 #: src/sleep.c:119 src/stat.c:1499 src/stdbuf.c:345 src/tr.c:1782 #: src/unlink.c:75 #, c-format msgid "missing operand" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/cat.c:48 src/cp.c:56 src/df.c:42 src/du.c:53 src/factor.c:110 #: src/split.c:49 msgid "Torbjorn Granlund" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/cat.c:49 src/comm.c:37 src/ls.c:123 src/rm.c:43 src/split.c:50 #: src/tee.c:35 src/uniq.c:41 msgid "Richard M. Stallman" msgstr "" #: src/cat.c:88 src/df.c:1209 src/expand.c:103 src/fold.c:66 src/head.c:105 #: src/ls.c:4720 src/nl.c:175 src/paste.c:435 src/pr.c:2752 src/sum.c:58 #: src/tac.c:133 src/tail.c:258 src/tee.c:62 src/unexpand.c:113 #, c-format msgid "Usage: %s [OPTION]... [FILE]...\n" msgstr "" #: src/cat.c:91 msgid "Concatenate FILE(s) to standard output.\n" msgstr "" #: src/cat.c:97 msgid "" "\n" " -A, --show-all equivalent to -vET\n" " -b, --number-nonblank number nonempty output lines, overrides -n\n" " -e equivalent to -vE\n" " -E, --show-ends display $ at end of each line\n" " -n, --number number all output lines\n" " -s, --squeeze-blank suppress repeated empty output lines\n" msgstr "" #: src/cat.c:102 msgid "" " -t equivalent to -vT\n" " -T, --show-tabs display TAB characters as ^I\n" " -u (ignored)\n" " -v, --show-nonprinting use ^ and M- notation, except for LFD and TAB\n" msgstr "" #: src/cat.c:114 #, c-format msgid "" "\n" "Examples:\n" " %s f - g Output f's contents, then standard input, then g's contents.\n" " %s Copy standard input to standard output.\n" msgstr "" #: src/cat.c:326 #, c-format msgid "cannot do ioctl on %s" msgstr "" #: src/cat.c:637 src/dd.c:2217 src/sort.c:383 src/tee.c:165 src/yes.c:86 #, c-format msgid "standard output" msgstr "" #: src/cat.c:716 #, c-format msgid "%s: input file is output file" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/chcon.c:36 src/runcon.c:62 msgid "Russell Coker" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/chcon.c:37 src/chgrp.c:38 src/chmod.c:40 src/chown.c:37 src/cp.c:58 #: src/cut.c:46 src/dirname.c:33 src/du.c:56 src/head.c:46 src/hostid.c:33 #: src/hostname.c:33 src/mktemp.c:36 src/mv.c:43 src/nohup.c:37 src/od.c:36 #: src/pathchk.c:34 src/pwd.c:31 src/rm.c:44 src/setuidgid.c:38 src/sleep.c:34 #: src/sync.c:31 src/tail.c:72 src/tr.c:37 src/true.c:33 msgid "Jim Meyering" msgstr "" #: src/chcon.c:100 src/runcon.c:207 src/runcon.c:238 #, c-format msgid "failed to create security context: %s" msgstr "" #: src/chcon.c:112 #, c-format msgid "failed to set %s security context component to %s" msgstr "" #: src/chcon.c:156 src/chcon.c:546 src/copy.c:2227 src/runcon.c:221 #: src/stat.c:702 #, c-format msgid "failed to get security context of %s" msgstr "" #: src/chcon.c:166 #, c-format msgid "can't apply partial context to unlabeled file %s" msgstr "" #: src/chcon.c:193 #, c-format msgid "failed to change context of %s to %s" msgstr "" #: src/chcon.c:255 src/chmod.c:216 src/chown-core.c:325 src/copy.c:581 #: src/du.c:457 src/ls.c:2981 #, c-format msgid "cannot access %s" msgstr "" #: src/chcon.c:265 src/chmod.c:229 src/chown-core.c:338 src/du.c:437 #, c-format msgid "cannot read directory %s" msgstr "" #: src/chcon.c:292 #, c-format msgid "changing security context of %s\n" msgstr "" #: src/chcon.c:326 src/chmod.c:346 src/chown-core.c:539 src/remove.c:562 #, c-format msgid "fts_read failed" msgstr "" #: src/chcon.c:337 src/chmod.c:357 src/chown-core.c:551 src/du.c:642 #: src/remove.c:576 #, c-format msgid "fts_close failed" msgstr "" #: src/chcon.c:351 #, c-format msgid "" "Usage: %s [OPTION]... CONTEXT FILE...\n" " or: %s [OPTION]... [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" #: src/chcon.c:357 msgid "" "Change the SELinux security context of each FILE to CONTEXT.\n" "With --reference, change the security context of each FILE to that of " "RFILE.\n" msgstr "" #: src/chcon.c:364 src/chgrp.c:123 src/chown.c:94 msgid "" " --dereference affect the referent of each symbolic link (this is\n" " the default), rather than the symbolic link itself\n" " -h, --no-dereference affect symbolic links instead of any referenced " "file\n" msgstr "" #: src/chcon.c:369 msgid "" " -u, --user=USER set user USER in the target security context\n" " -r, --role=ROLE set role ROLE in the target security context\n" " -t, --type=TYPE set type TYPE in the target security context\n" " -l, --range=RANGE set range RANGE in the target security context\n" msgstr "" #: src/chcon.c:375 src/chgrp.c:132 src/chmod.c:387 src/chown.c:110 msgid "" " --no-preserve-root do not treat '/' specially (the default)\n" " --preserve-root fail to operate recursively on '/'\n" msgstr "" #: src/chcon.c:379 msgid "" " --reference=RFILE use RFILE's security context rather than " "specifying\n" " a CONTEXT value\n" msgstr "" #: src/chcon.c:383 src/chgrp.c:140 src/chown.c:118 msgid "" " -R, --recursive operate on files and directories recursively\n" msgstr "" #: src/chcon.c:386 msgid "" " -v, --verbose output a diagnostic for every file processed\n" msgstr "" #: src/chcon.c:389 src/chgrp.c:143 src/chown.c:121 msgid "" "\n" "The following options modify how a hierarchy is traversed when the -R\n" "option is also specified. If more than one is specified, only the final\n" "one takes effect.\n" "\n" " -H if a command line argument is a symbolic link\n" " to a directory, traverse it\n" " -L traverse every symbolic link to a directory\n" " encountered\n" " -P do not traverse any symbolic links (default)\n" "\n" msgstr "" #: src/chcon.c:518 src/chgrp.c:264 src/chown.c:267 #, c-format msgid "-R --dereference requires either -H or -L" msgstr "" #: src/chcon.c:524 #, c-format msgid "-R -h requires -P" msgstr "" #: src/chcon.c:539 src/chgrp.c:279 src/chmod.c:528 src/chown.c:282 #: src/comm.c:429 src/csplit.c:1373 src/join.c:1149 src/link.c:79 #: src/mknod.c:147 src/setuidgid.c:139 src/tr.c:1785 #, c-format msgid "missing operand after %s" msgstr "" #: src/chcon.c:562 src/runcon.c:251 #, c-format msgid "invalid context: %s" msgstr "" #: src/chcon.c:569 #, c-format msgid "conflicting security context specifiers given" msgstr "" #: src/chcon.c:578 src/chgrp.c:287 src/chgrp.c:305 src/chmod.c:536 #: src/chmod.c:555 src/chown.c:290 src/chown.c:319 src/cp.c:431 src/cp.c:491 #: src/mv.c:97 src/pwd.c:273 src/rm.c:331 src/touch.c:347 #, c-format msgid "failed to get attributes of %s" msgstr "" #: src/chgrp.c:92 #, c-format msgid "invalid group: %s" msgstr "" #: src/chgrp.c:108 #, c-format msgid "" "Usage: %s [OPTION]... GROUP FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" #: src/chgrp.c:113 msgid "" "Change the group of each FILE to GROUP.\n" "With --reference, change the group of each FILE to that of RFILE.\n" "\n" msgstr "" #: src/chgrp.c:118 src/chmod.c:382 src/chown.c:89 msgid "" " -c, --changes like verbose but report only when a change is made\n" " -f, --silent, --quiet suppress most error messages\n" " -v, --verbose output a diagnostic for every file processed\n" msgstr "" #: src/chgrp.c:128 src/chown.c:99 msgid "" " (useful only on systems that can change the\n" " ownership of a symlink)\n" msgstr "" #: src/chgrp.c:136 msgid "" " --reference=RFILE use RFILE's group rather than specifying a\n" " GROUP value\n" msgstr "" #: src/chgrp.c:158 #, c-format msgid "" "\n" "Examples:\n" " %s staff /u Change the group of /u to \"staff\".\n" " %s -hR staff /u Change the group of /u and subfiles to \"staff\".\n" msgstr "" #: src/chmod.c:126 #, c-format msgid "getting new attributes of %s" msgstr "" #: src/chmod.c:149 src/chown-core.c:147 #, c-format msgid "neither symbolic link %s nor referent has been changed\n" msgstr "" #: src/chmod.c:163 #, c-format msgid "mode of %s changed from %04lo (%s) to %04lo (%s)\n" msgstr "" #: src/chmod.c:166 #, c-format msgid "failed to change mode of %s from %04lo (%s) to %04lo (%s)\n" msgstr "" #: src/chmod.c:169 #, c-format msgid "mode of %s retained as %04lo (%s)\n" msgstr "" #: src/chmod.c:236 #, c-format msgid "cannot operate on dangling symlink %s" msgstr "" #: src/chmod.c:276 #, c-format msgid "changing permissions of %s" msgstr "" #: src/chmod.c:311 #, c-format msgid "%s: new permissions are %s, not %s" msgstr "" #: src/chmod.c:371 #, c-format msgid "" "Usage: %s [OPTION]... MODE[,MODE]... FILE...\n" " or: %s [OPTION]... OCTAL-MODE FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" #: src/chmod.c:377 msgid "" "Change the mode of each FILE to MODE.\n" "With --reference, change the mode of each FILE to that of RFILE.\n" "\n" msgstr "" #: src/chmod.c:391 msgid " --reference=RFILE use RFILE's mode instead of MODE values\n" msgstr "" #: src/chmod.c:394 msgid " -R, --recursive change files and directories recursively\n" msgstr "" #: src/chmod.c:399 msgid "" "\n" "Each MODE is of the form '[ugoa]*([-+=]([rwxXst]*|[ugo]))+|[-+=][0-7]+'.\n" msgstr "" #: src/chmod.c:513 #, c-format msgid "cannot combine mode and --reference options" msgstr "" #: src/chmod.c:544 #, c-format msgid "invalid mode: %s" msgstr "" #: src/chown-core.c:158 #, c-format msgid "changed ownership of %s from %s to %s\n" msgstr "" #: src/chown-core.c:159 #, c-format msgid "changed group of %s from %s to %s\n" msgstr "" #: src/chown-core.c:160 #, c-format msgid "no change to ownership of %s\n" msgstr "" #: src/chown-core.c:165 #, c-format msgid "failed to change ownership of %s from %s to %s\n" msgstr "" #: src/chown-core.c:166 #, c-format msgid "failed to change group of %s from %s to %s\n" msgstr "" #: src/chown-core.c:167 src/chown-core.c:173 #, c-format msgid "failed to change ownership of %s\n" msgstr "" #: src/chown-core.c:171 #, c-format msgid "failed to change ownership of %s to %s\n" msgstr "" #: src/chown-core.c:172 #, c-format msgid "failed to change group of %s to %s\n" msgstr "" #: src/chown-core.c:180 #, c-format msgid "ownership of %s retained as %s\n" msgstr "" #: src/chown-core.c:181 #, c-format msgid "group of %s retained as %s\n" msgstr "" #: src/chown-core.c:182 #, c-format msgid "ownership of %s retained\n" msgstr "" #: src/chown-core.c:379 #, c-format msgid "cannot dereference %s" msgstr "" #: src/chown-core.c:467 #, c-format msgid "changing ownership of %s" msgstr "" #: src/chown-core.c:468 #, c-format msgid "changing group of %s" msgstr "" #: src/chown.c:79 #, c-format msgid "" "Usage: %s [OPTION]... [OWNER][:[GROUP]] FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" #: src/chown.c:84 msgid "" "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" "With --reference, change the owner and group of each FILE to those of " "RFILE.\n" "\n" msgstr "" #: src/chown.c:103 msgid "" " --from=CURRENT_OWNER:CURRENT_GROUP\n" " change the owner and/or group of each file only if\n" " its current owner and/or group match those " "specified\n" " here. Either may be omitted, in which case a " "match\n" " is not required for the omitted attribute\n" msgstr "" #: src/chown.c:114 msgid "" " --reference=RFILE use RFILE's owner and group rather than\n" " specifying OWNER:GROUP values\n" msgstr "" #: src/chown.c:136 msgid "" "\n" "Owner is unchanged if missing. Group is unchanged if missing, but changed\n" "to login group if implied by a ':' following a symbolic OWNER.\n" "OWNER and GROUP may be numeric as well as symbolic.\n" msgstr "" #: src/chown.c:142 #, c-format msgid "" "\n" "Examples:\n" " %s root /u Change the owner of /u to \"root\".\n" " %s root:staff /u Likewise, but also change its group to \"staff\".\n" " %s -hR root /u Change the owner of /u and subfiles to \"root\".\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/chroot.c:34 msgid "Roland McGrath" msgstr "" #: src/chroot.c:97 src/install.c:576 src/setuidgid.c:110 src/setuidgid.c:120 #, c-format msgid "invalid group %s" msgstr "" #: src/chroot.c:109 #, c-format msgid "invalid group list %s" msgstr "" #: src/chroot.c:132 #, c-format msgid "" "Usage: %s [OPTION] NEWROOT [COMMAND [ARG]...]\n" " or: %s OPTION\n" msgstr "" #: src/chroot.c:137 msgid "" "Run COMMAND with root directory set to NEWROOT.\n" "\n" msgstr "" #: src/chroot.c:195 msgid "" " --groups=G_LIST specify supplementary groups as g1,g2,..,gN\n" msgstr "" #: src/chroot.c:198 msgid " --userspec=USER:GROUP specify user and group (ID or name) to use\n" msgstr "" #: src/chroot.c:201 #, c-format msgid " --skip-chdir do not change working directory to %s\n" msgstr "" #: src/chroot.c:149 msgid "" "\n" "If no command is given, run '${SHELL} -i' (default: '/bin/sh -i').\n" msgstr "" #: src/chroot.c:286 #, c-format msgid "option --skip-chdir only permitted if NEWROOT is old %s" msgstr "" #: src/chroot.c:202 #, c-format msgid "cannot change root directory to %s" msgstr "" #: src/chroot.c:206 #, c-format msgid "cannot chdir to root directory" msgstr "" #: src/chroot.c:375 #, c-format msgid "no group specified for unknown uid: %d" msgstr "" #: src/chroot.c:400 #, c-format msgid "failed to get supplemental groups" msgstr "" #: src/chroot.c:412 #, c-format msgid "failed to set supplemental groups" msgstr "" #: src/chroot.c:247 #, c-format msgid "failed to set group-ID" msgstr "" #: src/chroot.c:253 #, c-format msgid "failed to set user-ID" msgstr "" #: src/chroot.c:275 src/nohup.c:236 src/setuidgid.c:212 src/stdbuf.c:365 #: src/timeout.c:454 #, c-format msgid "failed to run command %s" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/cksum.c:40 msgid "Q. Frank Xia" msgstr "" #: src/cksum.c:216 #, c-format msgid "%s: file too long" msgstr "" #: src/cksum.c:263 #, c-format msgid "" "Usage: %s [FILE]...\n" " or: %s [OPTION]\n" msgstr "" #: src/cksum.c:268 msgid "" "Print CRC checksum and byte counts of each FILE.\n" "\n" msgstr "" #: src/comm.c:103 src/join.c:187 #, c-format msgid "Usage: %s [OPTION]... FILE1 FILE2\n" msgstr "" #: src/comm.c:107 msgid "Compare sorted files FILE1 and FILE2 line by line.\n" msgstr "" #: src/comm.c:113 src/join.c:200 msgid "" "\n" "When FILE1 or FILE2 (not both) is -, read standard input.\n" msgstr "" #: src/comm.c:110 msgid "" "\n" "With no options, produce three-column output. Column one contains\n" "lines unique to FILE1, column two contains lines unique to FILE2,\n" "and column three contains lines common to both files.\n" msgstr "" #: src/comm.c:116 msgid "" "\n" " -1 suppress column 1 (lines unique to FILE1)\n" " -2 suppress column 2 (lines unique to FILE2)\n" " -3 suppress column 3 (lines that appear in both files)\n" msgstr "" #: src/comm.c:122 msgid "" "\n" " --check-order check that the input is correctly sorted, even\n" " if all input lines are pairable\n" " --nocheck-order do not check that the input is correctly sorted\n" msgstr "" #: src/comm.c:128 msgid " --output-delimiter=STR separate columns with STR\n" msgstr "" #: src/comm.c:138 src/cut.c:178 src/head.c:133 src/numfmt.c:944 src/paste.c:453 #: src/tail.c:304 msgid " -z, --zero-terminated line delimiter is NUL, not newline\n" msgstr "" #: src/comm.c:133 msgid "" "\n" "Note, comparisons honor the rules specified by 'LC_COLLATE'.\n" msgstr "" #: src/comm.c:137 #, c-format msgid "" "\n" "Examples:\n" " %s -12 file1 file2 Print only lines present in both file1 and file2.\n" " %s -3 file1 file2 Print lines in file1 not in file2, and vice versa.\n" msgstr "" #: src/comm.c:222 #, c-format msgid "file %d is not in sorted order" msgstr "" #: src/comm.c:420 #, c-format msgid "multiple output delimiters specified" msgstr "" #: src/copy.c:195 src/copy.c:346 src/copy.c:357 src/head.c:425 #, c-format msgid "cannot lseek %s" msgstr "" #: src/copy.c:191 src/copy.c:563 #, c-format msgid "error deallocating %s" msgstr "" #: src/copy.c:168 src/dd.c:1617 src/dd.c:1984 src/du.c:1085 src/head.c:148 #: src/head.c:261 src/head.c:333 src/head.c:537 src/head.c:619 src/head.c:699 #: src/head.c:757 src/head.c:781 src/tail.c:411 src/tail.c:499 src/tail.c:548 #: src/tail.c:641 src/tail.c:769 src/tail.c:817 src/tail.c:854 src/tail.c:1782 #: src/tail.c:1812 src/uniq.c:394 #, c-format msgid "error reading %s" msgstr "" #: src/copy.c:206 src/dd.c:2047 src/dd.c:2110 src/head.c:151 #, c-format msgid "error writing %s" msgstr "" #: src/copy.c:293 #, c-format msgid "overflow reading %s" msgstr "" #: src/copy.c:313 #, c-format msgid "%s: failed to get extents info" msgstr "" #: src/copy.c:373 #, c-format msgid "%s: write failed" msgstr "" #: src/copy.c:442 src/copy.c:1083 #, c-format msgid "failed to extend %s" msgstr "" #: src/copy.c:662 #, c-format msgid "clearing permissions for %s" msgstr "" #: src/copy.c:697 src/copy.c:2480 src/cp.c:329 #, c-format msgid "failed to preserve ownership for %s" msgstr "" #: src/copy.c:723 #, c-format msgid "failed to lookup file %s" msgstr "" #: src/copy.c:728 #, c-format msgid "failed to preserve authorship for %s" msgstr "" #: src/copy.c:2212 src/install.c:906 src/mkdir.c:188 src/mkfifo.c:113 #: src/mknod.c:166 #, c-format msgid "failed to set default file creation context to %s" msgstr "" #: src/copy.c:931 #, c-format msgid "failed to set default file creation context for %s" msgstr "" #: src/copy.c:957 #, c-format msgid "failed to set the security context of %s" msgstr "" #: src/copy.c:804 src/csplit.c:640 src/du.c:971 src/fmt.c:451 src/head.c:854 #: src/sort.c:4543 src/split.c:1342 src/tail.c:1756 src/wc.c:678 #, c-format msgid "cannot open %s for reading" msgstr "" #: src/copy.c:810 src/copy.c:972 src/dd.c:1554 src/dd.c:2122 src/dd.c:2261 #: src/tail.c:1592 src/tail.c:1658 src/truncate.c:140 #, c-format msgid "cannot fstat %s" msgstr "" #: src/copy.c:820 #, c-format msgid "skipping file %s, as it was replaced while being copied" msgstr "" #: src/copy.c:881 src/copy.c:1579 src/copy.c:1782 src/copy.c:1940 src/ln.c:314 #: src/remove.c:263 src/remove.c:280 src/remove.c:405 src/remove.c:431 #, c-format msgid "cannot remove %s" msgstr "" #: src/copy.c:886 src/copy.c:1583 src/copy.c:1777 src/copy.c:1945 #: src/remove.c:375 #, c-format msgid "removed %s\n" msgstr "" #: src/copy.c:926 #, c-format msgid "not writing through dangling symlink %s" msgstr "" #: src/copy.c:964 #, c-format msgid "cannot create regular file %s" msgstr "" #: src/copy.c:985 #, c-format msgid "failed to clone %s from %s" msgstr "" #: src/copy.c:1098 src/copy.c:2541 #, c-format msgid "preserving times for %s" msgstr "" #: src/copy.c:1175 src/copy.c:1181 src/head.c:862 src/touch.c:172 #: src/truncate.c:417 #, c-format msgid "failed to close %s" msgstr "" #: src/copy.c:1674 #, c-format msgid "%s: replace %s, overriding mode %04lo (%s)? " msgstr "" #: src/copy.c:1675 #, c-format msgid "%s: unwritable %s (mode %04lo, %s); try anyway? " msgstr "" #: src/copy.c:1478 #, c-format msgid "%s: overwrite %s? " msgstr "" #: src/copy.c:1547 #, c-format msgid " (backup: %s)" msgstr "" #: src/copy.c:1557 #, c-format msgid "failed to restore the default file creation context" msgstr "" #: src/copy.c:1589 #, c-format msgid "cannot create hard link %s to %s" msgstr "" #: src/copy.c:1642 src/copy.c:1694 src/copy.c:2277 src/copy.c:2604 #: src/find-mount-point.c:84 src/install.c:678 src/realpath.c:145 #: src/stat.c:1239 src/truncate.c:363 #, c-format msgid "cannot stat %s" msgstr "" #: src/copy.c:1650 #, c-format msgid "omitting directory %s" msgstr "" #: src/copy.c:1664 #, c-format msgid "warning: source file %s specified more than once" msgstr "" #: src/copy.c:1712 src/ln.c:246 #, c-format msgid "%s and %s are the same file" msgstr "" #: src/copy.c:1811 #, c-format msgid "cannot overwrite non-directory %s with directory %s" msgstr "" #: src/copy.c:1829 src/ln.c:214 #, c-format msgid "will not overwrite just-created %s with %s" msgstr "" #: src/copy.c:1847 #, c-format msgid "cannot overwrite directory %s with non-directory" msgstr "" #: src/copy.c:1861 #, c-format msgid "cannot move directory onto non-directory: %s -> %s" msgstr "" #: src/copy.c:1891 #, c-format msgid "backing up %s would destroy source; %s not moved" msgstr "" #: src/copy.c:1892 #, c-format msgid "backing up %s would destroy source; %s not copied" msgstr "" #: src/copy.c:1915 src/ln.c:276 #, c-format msgid "cannot backup %s" msgstr "" #: src/copy.c:1979 #, c-format msgid "will not copy %s through just-created symlink %s" msgstr "" #: src/copy.c:2056 #, c-format msgid "cannot copy a directory, %s, into itself, %s" msgstr "" #: src/copy.c:2278 #, c-format msgid "warning: source directory %s specified more than once" msgstr "" #: src/copy.c:2073 #, c-format msgid "will not create hard link %s to directory %s" msgstr "" #: src/copy.c:2123 #, c-format msgid "cannot move %s to a subdirectory of itself, %s" msgstr "" #: src/copy.c:2166 #, c-format msgid "cannot move %s to %s" msgstr "" #: src/copy.c:2178 #, c-format msgid "inter-device move failed: %s to %s; unable to remove target" msgstr "" #: src/copy.c:2246 #, c-format msgid "cannot copy cyclic symbolic link %s" msgstr "" #: src/copy.c:2355 #, c-format msgid "%s: can make relative symbolic links only in current directory" msgstr "" #: src/copy.c:2362 #, c-format msgid "cannot create symbolic link %s to %s" msgstr "" #: src/copy.c:2416 src/mkfifo.c:132 #, c-format msgid "cannot create fifo %s" msgstr "" #: src/copy.c:2425 #, c-format msgid "cannot create special file %s" msgstr "" #: src/copy.c:2436 src/ls.c:3185 src/stat.c:921 #, c-format msgid "cannot read symbolic link %s" msgstr "" #: src/copy.c:2463 #, c-format msgid "cannot create symbolic link %s" msgstr "" #: src/copy.c:2495 #, c-format msgid "%s has unknown file type" msgstr "" #: src/copy.c:2644 src/ln.c:358 #, c-format msgid "cannot un-backup %s" msgstr "" #: src/copy.c:2648 #, c-format msgid "%s -> %s (unbackup)\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/coreutils.c:47 msgid "Alex Deymo" msgstr "" #: src/coreutils.c:64 #, c-format msgid "Usage: %s --coreutils-prog=PROGRAM_NAME [PARAMETERS]... \n" msgstr "" #: src/coreutils.c:67 msgid "" "Execute the PROGRAM_NAME built-in program with the given PARAMETERS.\n" "\n" msgstr "" #: src/coreutils.c:85 #, c-format msgid "" "\n" "Use: '%s --coreutils-prog=PROGRAM_NAME --help' for individual program help.\n" msgstr "" #: src/coreutils.c:177 src/coreutils.c:202 #, c-format msgid "unknown program %s" msgstr "" #: src/cp.c:156 src/mv.c:286 #, c-format msgid "" "Usage: %s [OPTION]... [-T] SOURCE DEST\n" " or: %s [OPTION]... SOURCE... DIRECTORY\n" " or: %s [OPTION]... -t DIRECTORY SOURCE...\n" msgstr "" #: src/cp.c:162 msgid "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" msgstr "" #: src/cp.c:168 msgid "" " -a, --archive same as -dR --preserve=all\n" " --attributes-only don't copy the file data, just the " "attributes\n" " --backup[=CONTROL] make a backup of each existing destination " "file\n" " -b like --backup but does not accept an " "argument\n" " --copy-contents copy contents of special files when " "recursive\n" " -d same as --no-dereference --preserve=links\n" msgstr "" #: src/cp.c:177 msgid "" " -f, --force if an existing destination file cannot be\n" " opened, remove it and try again (this " "option\n" " is ignored when the -n option is also " "used)\n" " -i, --interactive prompt before overwrite (overrides a previous " "-n\n" " option)\n" " -H follow command-line symbolic links in SOURCE\n" msgstr "" #: src/cp.c:186 msgid "" " -l, --link hard link files instead of copying\n" " -L, --dereference always follow symbolic links in SOURCE\n" msgstr "" #: src/cp.c:190 msgid "" " -n, --no-clobber do not overwrite an existing file (overrides\n" " a previous -i option)\n" " -P, --no-dereference never follow symbolic links in SOURCE\n" msgstr "" #: src/cp.c:195 msgid "" " -p same as --preserve=mode,ownership,timestamps\n" " --preserve[=ATTR_LIST] preserve the specified attributes (default:\n" " mode,ownership,timestamps), if possible\n" " additional attributes: context, links, " "xattr,\n" " all\n" msgstr "" #: src/cp.c:203 msgid "" " --no-preserve=ATTR_LIST don't preserve the specified attributes\n" " --parents use full source file name under DIRECTORY\n" msgstr "" #: src/cp.c:207 msgid "" " -R, -r, --recursive copy directories recursively\n" " --reflink[=WHEN] control clone/CoW copies. See below\n" " --remove-destination remove each existing destination file before\n" " attempting to open it (contrast with --" "force)\n" msgstr "" #: src/cp.c:213 msgid "" " --sparse=WHEN control creation of sparse files. See below\n" " --strip-trailing-slashes remove any trailing slashes from each " "SOURCE\n" " argument\n" msgstr "" #: src/cp.c:218 msgid "" " -s, --symbolic-link make symbolic links instead of copying\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" " -t, --target-directory=DIRECTORY copy all SOURCE arguments into " "DIRECTORY\n" " -T, --no-target-directory treat DEST as a normal file\n" msgstr "" #: src/cp.c:224 msgid "" " -u, --update copy only when the SOURCE file is newer\n" " than the destination file or when the\n" " destination file is missing\n" " -v, --verbose explain what is being done\n" " -x, --one-file-system stay on this file system\n" msgstr "" #: src/cp.c:232 msgid "" " -Z set SELinux security context of destination\n" " file to default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the\n" " SELinux or SMACK security context to CTX\n" msgstr "" #: src/cp.c:233 msgid "" "\n" "By default, sparse SOURCE files are detected by a crude heuristic and the\n" "corresponding DEST file is made sparse as well. That is the behavior\n" "selected by --sparse=auto. Specify --sparse=always to create a sparse DEST\n" "file whenever the SOURCE file contains a long enough sequence of zero " "bytes.\n" "Use --sparse=never to inhibit creation of sparse files.\n" "\n" "When --reflink[=always] is specified, perform a lightweight copy, where the\n" "data blocks are copied only when modified. If this is not possible the " "copy\n" "fails, or if --reflink=auto is specified, fall back to a standard copy.\n" msgstr "" #: src/cp.c:245 src/install.c:649 src/ln.c:420 src/mv.c:322 msgid "" "\n" "The backup suffix is '~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control method may be selected via the --backup option or " "through\n" "the VERSION_CONTROL environment variable. Here are the values:\n" "\n" msgstr "" #: src/cp.c:252 src/install.c:656 src/ln.c:427 src/mv.c:329 msgid "" " none, off never make backups (even if --backup is given)\n" " numbered, t make numbered backups\n" " existing, nil numbered if numbered backups exist, simple otherwise\n" " simple, never always make simple backups\n" msgstr "" #: src/cp.c:258 msgid "" "\n" "As a special case, cp makes a backup of SOURCE when the force and backup\n" "options are given and SOURCE and DEST are the same name for an existing,\n" "regular file.\n" msgstr "" #: src/cp.c:317 #, c-format msgid "failed to preserve times for %s" msgstr "" #: src/cp.c:348 #, c-format msgid "failed to preserve permissions for %s" msgstr "" #: src/cp.c:475 #, c-format msgid "cannot make directory %s" msgstr "" #: src/cp.c:524 src/cp.c:543 #, c-format msgid "%s exists but is not a directory" msgstr "" #: src/cp.c:570 src/cp.c:1069 src/install.c:402 src/install.c:844 src/ln.c:123 #: src/ln.c:181 src/ln.c:202 src/ln.c:515 src/mv.c:154 src/mv.c:400 #, c-format msgid "failed to access %s" msgstr "" #: src/cp.c:590 src/install.c:915 src/ln.c:546 src/mv.c:434 src/shred.c:1181 #: src/touch.c:429 src/truncate.c:354 #, c-format msgid "missing file operand" msgstr "" #: src/cp.c:592 src/install.c:917 src/ln.c:560 src/mv.c:436 #, c-format msgid "missing destination file operand after %s" msgstr "" #: src/cp.c:601 src/install.c:926 src/mv.c:445 #, c-format msgid "cannot combine --target-directory (-t) and --no-target-directory (-T)" msgstr "" #: src/cp.c:617 src/cp.c:1072 src/install.c:404 src/install.c:847 #: src/install.c:939 src/ln.c:125 src/ln.c:518 src/ln.c:574 src/mv.c:403 #: src/mv.c:459 #, c-format msgid "target %s is not a directory" msgstr "" #: src/cp.c:728 #, c-format msgid "with --parents, the destination must be a directory" msgstr "" #: src/cp.c:1064 src/install.c:839 src/ln.c:510 src/mv.c:395 #, c-format msgid "multiple target directories specified" msgstr "" #: src/cp.c:1116 src/install.c:910 #, c-format msgid "warning: ignoring --context; it requires an SELinux-enabled kernel" msgstr "" #: src/cp.c:1110 #, c-format msgid "cannot make both hard and symbolic links" msgstr "" #: src/cp.c:1117 src/mv.c:466 #, c-format msgid "options --backup and --no-clobber are mutually exclusive" msgstr "" #: src/cp.c:1123 #, c-format msgid "--reflink can be used only with --sparse=auto" msgstr "" #: src/cp.c:1131 src/install.c:900 src/ln.c:582 src/mv.c:474 msgid "backup type" msgstr "" #: src/cp.c:1186 src/install.c:951 #, c-format msgid "cannot set target context and preserve it" msgstr "" #: src/cp.c:1156 #, c-format msgid "cannot preserve security context without an SELinux-enabled kernel" msgstr "" #: src/cp.c:1162 #, c-format msgid "" "cannot preserve extended attributes, cp is built without xattr support" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/csplit.c:41 src/dd.c:46 msgid "Stuart Kemp" msgstr "" #: src/csplit.c:531 #, c-format msgid "input disappeared" msgstr "" #: src/csplit.c:660 src/csplit.c:671 #, c-format msgid "%s: line number out of range" msgstr "" #: src/csplit.c:700 #, c-format msgid "%s: %s: line number out of range" msgstr "" #: src/csplit.c:703 src/csplit.c:752 #, c-format msgid " on repetition %s\n" msgstr "" #: src/csplit.c:746 #, c-format msgid "%s: %s: match not found" msgstr "" #: src/csplit.c:810 src/csplit.c:850 src/nl.c:351 src/tac.c:273 #, c-format msgid "error in regular expression search" msgstr "" #: src/csplit.c:983 #, c-format msgid "write error for %s" msgstr "" #: src/csplit.c:1059 #, c-format msgid "%s: integer expected after delimiter" msgstr "" #: src/csplit.c:1075 #, c-format msgid "%s: '}' is required in repeat count" msgstr "" #: src/csplit.c:1085 #, c-format msgid "%s}: integer required between '{' and '}'" msgstr "" #: src/csplit.c:1112 #, c-format msgid "%s: closing delimiter '%c' missing" msgstr "" #: src/csplit.c:1129 #, c-format msgid "%s: invalid regular expression: %s" msgstr "" #: src/csplit.c:1162 #, c-format msgid "%s: invalid pattern" msgstr "" #: src/csplit.c:1165 #, c-format msgid "%s: line number must be greater than zero" msgstr "" #: src/csplit.c:1171 #, c-format msgid "line number %s is smaller than preceding line number, %s" msgstr "" #: src/csplit.c:1177 #, c-format msgid "warning: line number %s is the same as preceding line number" msgstr "" #: src/csplit.c:1255 #, c-format msgid "missing conversion specifier in suffix" msgstr "" #: src/csplit.c:1261 #, c-format msgid "invalid conversion specifier in suffix: %c" msgstr "" #: src/csplit.c:1264 #, c-format msgid "invalid conversion specifier in suffix: \\%.3o" msgstr "" #: src/csplit.c:1269 #, c-format msgid "invalid flags in conversion specification: %%%c%c" msgstr "" #: src/csplit.c:1286 #, c-format msgid "too many %% conversion specifications in suffix" msgstr "" #: src/csplit.c:1300 #, c-format msgid "missing %% conversion specification in suffix" msgstr "" #: src/csplit.c:1381 src/dd.c:1454 src/nproc.c:105 src/tail.c:2052 msgid "invalid number" msgstr "" #: src/csplit.c:1451 #, c-format msgid "Usage: %s [OPTION]... FILE PATTERN...\n" msgstr "" #: src/csplit.c:1455 msgid "" "Output pieces of FILE separated by PATTERN(s) to files 'xx00', 'xx01', ...,\n" "and output byte counts of each piece to standard output.\n" msgstr "" #: src/csplit.c:1496 msgid "" "\n" "Read standard input if FILE is -\n" msgstr "" #: src/csplit.c:1462 #, c-format msgid "" " -b, --suffix-format=FORMAT use sprintf FORMAT instead of %02d\n" " -f, --prefix=PREFIX use PREFIX instead of 'xx'\n" " -k, --keep-files do not remove output files on errors\n" msgstr "" #: src/csplit.c:1508 msgid " --suppress-matched suppress the lines matching PATTERN\n" msgstr "" #: src/csplit.c:1467 msgid "" " -n, --digits=DIGITS use specified number of digits instead of 2\n" " -s, --quiet, --silent do not print counts of output file sizes\n" " -z, --elide-empty-files remove empty output files\n" msgstr "" #: src/csplit.c:1518 msgid "" "\n" "Each PATTERN may be:\n" " INTEGER copy up to but not including specified line number\n" " /REGEXP/[OFFSET] copy up to but not including a matching line\n" " %REGEXP%[OFFSET] skip to, but not including a matching line\n" " {INTEGER} repeat the previous pattern specified number of times\n" " {*} repeat the previous pattern as many times as possible\n" "\n" "A line OFFSET is a required '+' or '-' followed by a positive integer.\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/cut.c:44 src/paste.c:52 msgid "David M. Ihnat" msgstr "" #: src/cut.c:189 #, c-format msgid "Usage: %s OPTION... [FILE]...\n" msgstr "" #: src/cut.c:193 msgid "Print selected parts of lines from each FILE to standard output.\n" msgstr "" #: src/cut.c:199 msgid "" " -b, --bytes=LIST select only these bytes\n" " -c, --characters=LIST select only these characters\n" " -d, --delimiter=DELIM use DELIM instead of TAB for field delimiter\n" msgstr "" #: src/cut.c:204 msgid "" " -f, --fields=LIST select only these fields; also print any line\n" " that contains no delimiter character, unless\n" " the -s option is specified\n" " -n (ignored)\n" msgstr "" #: src/cut.c:210 msgid "" " --complement complement the set of selected bytes, characters\n" " or fields\n" msgstr "" #: src/cut.c:214 msgid "" " -s, --only-delimited do not print lines not containing delimiters\n" " --output-delimiter=STRING use STRING as the output delimiter\n" " the default is to use the input delimiter\n" msgstr "" #: src/cut.c:221 msgid "" "\n" "Use one, and only one of -b, -c or -f. Each LIST is made up of one\n" "range, or many ranges separated by commas. Selected input is written\n" "in the same order that it is read, and is written exactly once.\n" msgstr "" #: src/cut.c:189 msgid "" "Each range is one of:\n" "\n" " N N'th byte, character or field, counted from 1\n" " N- from N'th byte, character or field, to end of line\n" " N-M from N'th to M'th (included) byte, character or field\n" " -M from first to M'th (included) byte, character or field\n" msgstr "" #: src/cut.c:795 src/cut.c:803 msgid "only one type of list may be specified" msgstr "" #: src/cut.c:812 src/numfmt.c:1408 #, c-format msgid "the delimiter must be a single character" msgstr "" #: src/cut.c:847 msgid "you must specify a list of bytes, characters, or fields" msgstr "" #: src/cut.c:850 msgid "an input delimiter may be specified only when operating on fields" msgstr "" #: src/cut.c:854 msgid "" "suppressing non-delimited lines makes sense\n" "\tonly when operating on fields" msgstr "" #: src/date.c:123 #, c-format msgid "" "Usage: %s [OPTION]... [+FORMAT]\n" " or: %s [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]]\n" msgstr "" #: src/date.c:128 msgid "" "Display the current time in the given FORMAT, or set the system date.\n" msgstr "" #: src/date.c:134 msgid "" " -d, --date=STRING display time described by STRING, not 'now'\n" " -f, --file=DATEFILE like --date; once for each line of DATEFILE\n" msgstr "" #: src/date.c:138 msgid "" " -I[FMT], --iso-8601[=FMT] output date/time in ISO 8601 format.\n" " FMT='date' for date only (the default),\n" " 'hours', 'minutes', 'seconds', or 'ns'\n" " for date and time to the indicated " "precision.\n" " Example: 2006-08-14T02:34:56-0600\n" msgstr "" #: src/date.c:145 msgid "" " -R, --rfc-2822 output date and time in RFC 2822 format.\n" " Example: Mon, 14 Aug 2006 02:34:56 -0600\n" msgstr "" #: src/date.c:149 msgid "" " --rfc-3339=FMT output date/time in RFC 3339 format.\n" " FMT='date', 'seconds', or 'ns'\n" " for date and time to the indicated " "precision.\n" " Example: 2006-08-14 02:34:56-06:00\n" msgstr "" #: src/date.c:155 msgid "" " -r, --reference=FILE display the last modification time of FILE\n" msgstr "" #: src/date.c:158 msgid "" " -s, --set=STRING set time described by STRING\n" " -u, --utc, --universal print or set Coordinated Universal Time (UTC)\n" msgstr "" #: src/date.c:158 msgid "" "\n" "FORMAT controls the output. Interpreted sequences are:\n" "\n" " %% a literal %\n" " %a locale's abbreviated weekday name (e.g., Sun)\n" msgstr "" #: src/date.c:165 msgid "" " %A locale's full weekday name (e.g., Sunday)\n" " %b locale's abbreviated month name (e.g., Jan)\n" " %B locale's full month name (e.g., January)\n" " %c locale's date and time (e.g., Thu Mar 3 23:05:25 2005)\n" msgstr "" #: src/date.c:171 msgid "" " %C century; like %Y, except omit last two digits (e.g., 20)\n" " %d day of month (e.g., 01)\n" " %D date; same as %m/%d/%y\n" " %e day of month, space padded; same as %_d\n" msgstr "" #: src/date.c:177 msgid "" " %F full date; same as %Y-%m-%d\n" " %g last two digits of year of ISO week number (see %G)\n" " %G year of ISO week number (see %V); normally useful only with %V\n" msgstr "" #: src/date.c:182 msgid "" " %h same as %b\n" " %H hour (00..23)\n" " %I hour (01..12)\n" " %j day of year (001..366)\n" msgstr "" #: src/date.c:188 msgid "" " %k hour, space padded ( 0..23); same as %_H\n" " %l hour, space padded ( 1..12); same as %_I\n" " %m month (01..12)\n" " %M minute (00..59)\n" msgstr "" #: src/date.c:194 msgid "" " %n a newline\n" " %N nanoseconds (000000000..999999999)\n" " %p locale's equivalent of either AM or PM; blank if not known\n" " %P like %p, but lower case\n" " %r locale's 12-hour clock time (e.g., 11:11:04 PM)\n" " %R 24-hour hour and minute; same as %H:%M\n" " %s seconds since 1970-01-01 00:00:00 UTC\n" msgstr "" #: src/date.c:203 msgid "" " %S second (00..60)\n" " %t a tab\n" " %T time; same as %H:%M:%S\n" " %u day of week (1..7); 1 is Monday\n" msgstr "" #: src/date.c:209 msgid "" " %U week number of year, with Sunday as first day of week (00..53)\n" " %V ISO week number, with Monday as first day of week (01..53)\n" " %w day of week (0..6); 0 is Sunday\n" " %W week number of year, with Monday as first day of week (00..53)\n" msgstr "" #: src/date.c:215 msgid "" " %x locale's date representation (e.g., 12/31/99)\n" " %X locale's time representation (e.g., 23:13:48)\n" " %y last two digits of year (00..99)\n" " %Y year\n" msgstr "" #: src/date.c:221 msgid "" " %z +hhmm numeric time zone (e.g., -0400)\n" " %:z +hh:mm numeric time zone (e.g., -04:00)\n" " %::z +hh:mm:ss numeric time zone (e.g., -04:00:00)\n" " %:::z numeric time zone with : to necessary precision (e.g., -04, " "+05:30)\n" " %Z alphabetic time zone abbreviation (e.g., EDT)\n" "\n" "By default, date pads numeric fields with zeroes.\n" msgstr "" #: src/date.c:230 msgid "" "The following optional flags may follow '%':\n" "\n" " - (hyphen) do not pad the field\n" " _ (underscore) pad with spaces\n" " 0 (zero) pad with zeros\n" " ^ use upper case if possible\n" " # use opposite case if possible\n" msgstr "" #: src/date.c:239 msgid "" "\n" "After any flags comes an optional field width, as a decimal number;\n" "then an optional modifier, which is either\n" "E to use the locale's alternate representations if available, or\n" "O to use the locale's alternate numeric symbols if available.\n" msgstr "" #: src/date.c:246 msgid "" "\n" "Examples:\n" "Convert seconds since the epoch (1970-01-01 UTC) to a date\n" " $ date --date='@2147483647'\n" "\n" "Show the time on the west coast of the US (use tzselect(1) to find TZ)\n" " $ TZ='America/Los_Angeles' date\n" "\n" "Show the local time for 9AM next Friday on the west coast of the US\n" " $ date --date='TZ=\"America/Los_Angeles\" 09:00 next Fri'\n" msgstr "" #: src/date.c:279 src/dd.c:2201 src/head.c:845 src/md5sum.c:498 #: src/md5sum.c:862 src/od.c:869 src/od.c:1920 src/pr.c:1172 src/pr.c:1362 #: src/pr.c:1484 src/stty.c:851 src/tac.c:562 src/tail.c:342 src/tee.c:126 #: src/tr.c:1945 src/tsort.c:530 src/wc.c:196 #, c-format msgid "standard input" msgstr "" #: src/date.c:307 src/date.c:527 #, c-format msgid "invalid date %s" msgstr "" #: src/date.c:418 src/date.c:452 #, c-format msgid "multiple output formats specified" msgstr "" #: src/date.c:430 #, c-format msgid "the options to specify dates for printing are mutually exclusive" msgstr "" #: src/date.c:437 #, c-format msgid "the options to print and set the time may not be used together" msgstr "" #: src/date.c:458 #, c-format msgid "" "the argument %s lacks a leading '+';\n" "when using an option to specify date(s), any non-option\n" "argument must be a format string beginning with '+'" msgstr "" #: src/date.c:535 #, c-format msgid "cannot set date" msgstr "" #: src/date.c:558 src/du.c:371 #, c-format msgid "time %s is out of range" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/dd.c:44 src/factor.c:109 src/rm.c:41 src/tail.c:69 src/touch.c:41 #: src/wc.c:50 msgid "Paul Rubin" msgstr "" #: src/dd.c:521 #, c-format msgid "" "Usage: %s [OPERAND]...\n" " or: %s OPTION\n" msgstr "" #: src/dd.c:526 msgid "" "Copy a file, converting and formatting according to the operands.\n" "\n" " bs=BYTES read and write up to BYTES bytes at a time\n" " cbs=BYTES convert BYTES bytes at a time\n" " conv=CONVS convert the file as per the comma separated symbol list\n" " count=N copy only N input blocks\n" " ibs=BYTES read up to BYTES bytes at a time (default: 512)\n" msgstr "" #: src/dd.c:568 msgid "" " if=FILE read from FILE instead of stdin\n" " iflag=FLAGS read as per the comma separated symbol list\n" " obs=BYTES write BYTES bytes at a time (default: 512)\n" " of=FILE write to FILE instead of stdout\n" " oflag=FLAGS write as per the comma separated symbol list\n" " seek=N skip N obs-sized blocks at start of output\n" " skip=N skip N ibs-sized blocks at start of input\n" " status=LEVEL The LEVEL of information to print to stderr;\n" " 'none' suppresses everything but error messages,\n" " 'noxfer' suppresses the final transfer statistics,\n" " 'progress' shows periodic transfer statistics\n" msgstr "" #: src/dd.c:546 msgid "" "\n" "N and BYTES may be followed by the following multiplicative suffixes:\n" "c =1, w =2, b =512, kB =1000, K =1024, MB =1000*1000, M =1024*1024, xM =M\n" "GB =1000*1000*1000, G =1024*1024*1024, and so on for T, P, E, Z, Y.\n" "\n" "Each CONV symbol may be:\n" "\n" msgstr "" #: src/dd.c:555 msgid "" " ascii from EBCDIC to ASCII\n" " ebcdic from ASCII to EBCDIC\n" " ibm from ASCII to alternate EBCDIC\n" " block pad newline-terminated records with spaces to cbs-size\n" " unblock replace trailing spaces in cbs-size records with newline\n" " lcase change upper case to lower case\n" " ucase change lower case to upper case\n" " sparse try to seek rather than write the output for NUL input blocks\n" " swab swap every pair of input bytes\n" " sync pad every input block with NULs to ibs-size; when used\n" " with block or unblock, pad with spaces rather than NULs\n" msgstr "" #: src/dd.c:568 msgid "" " excl fail if the output file already exists\n" " nocreat do not create the output file\n" " notrunc do not truncate the output file\n" " noerror continue after read errors\n" " fdatasync physically write output file data before finishing\n" " fsync likewise, but also write metadata\n" msgstr "" #: src/dd.c:576 msgid "" "\n" "Each FLAG symbol may be:\n" "\n" " append append mode (makes sense only for output; conv=notrunc " "suggested)\n" msgstr "" #: src/dd.c:583 msgid " cio use concurrent I/O for data\n" msgstr "" #: src/dd.c:585 msgid " direct use direct I/O for data\n" msgstr "" #: src/dd.c:587 msgid " directory fail unless a directory\n" msgstr "" #: src/dd.c:589 msgid " dsync use synchronized I/O for data\n" msgstr "" #: src/dd.c:591 msgid " sync likewise, but also for metadata\n" msgstr "" #: src/dd.c:592 msgid " fullblock accumulate full blocks of input (iflag only)\n" msgstr "" #: src/dd.c:595 msgid " nonblock use non-blocking I/O\n" msgstr "" #: src/dd.c:597 msgid " noatime do not update access time\n" msgstr "" #: src/dd.c:635 msgid " nocache Request to drop cache. See also oflag=sync\n" msgstr "" #: src/dd.c:603 msgid " noctty do not assign controlling terminal from file\n" msgstr "" #: src/dd.c:606 msgid " nofollow do not follow symlinks\n" msgstr "" #: src/dd.c:608 msgid " nolinks fail if multiply-linked\n" msgstr "" #: src/dd.c:610 msgid " binary use binary I/O for data\n" msgstr "" #: src/dd.c:612 msgid " text use text I/O for data\n" msgstr "" #: src/dd.c:614 msgid " count_bytes treat 'count=N' as a byte count (iflag only)\n" msgstr "" #: src/dd.c:617 msgid " skip_bytes treat 'skip=N' as a byte count (iflag only)\n" msgstr "" #: src/dd.c:620 msgid " seek_bytes treat 'seek=N' as a byte count (oflag only)\n" msgstr "" #: src/dd.c:660 #, c-format msgid "" "\n" "Sending a %s signal to a running 'dd' process makes it\n" "print I/O statistics to standard error and then resume copying.\n" "\n" "Options are:\n" "\n" msgstr "" #: src/dd.c:696 #, c-format msgid "memory exhausted by input buffer of size % bytes (%s)" msgstr "" #: src/dd.c:725 #, c-format msgid "memory exhausted by output buffer of size % bytes (%s)" msgstr "" #: src/dd.c:720 msgid "Infinity B" msgstr "" #: src/dd.c:809 #, c-format msgid "% byte copied, %g s, %s/s" msgid_plural "% bytes copied, %g s, %s/s" msgstr[0] "" msgstr[1] "" #: src/dd.c:815 #, c-format msgid "% bytes (%s) copied, %g s, %s/s" msgstr "" #: src/dd.c:818 #, c-format msgid "% bytes (%s, %s) copied, %g s, %s/s" msgstr "" #: src/dd.c:683 #, c-format msgid "" "%+% records in\n" "%+% records out\n" msgstr "" #: src/dd.c:689 #, c-format msgid "% truncated record\n" msgid_plural "% truncated records\n" msgstr[0] "" msgstr[1] "" #: src/dd.c:812 #, c-format msgid "closing input file %s" msgstr "" #: src/dd.c:819 #, c-format msgid "closing output file %s" msgstr "" #: src/dd.c:1022 #, c-format msgid "failed to turn off O_DIRECT: %s" msgstr "" #: src/dd.c:1093 src/dd.c:1942 #, c-format msgid "writing to %s" msgstr "" #: src/dd.c:1207 src/dd.c:1261 #, c-format msgid "unrecognized operand %s" msgstr "" #: src/dd.c:1218 msgid "invalid conversion" msgstr "" #: src/dd.c:1221 src/dd.c:1297 msgid "invalid input flag" msgstr "" #: src/dd.c:1224 src/dd.c:1291 src/dd.c:1303 msgid "invalid output flag" msgstr "" #: src/dd.c:1402 msgid "invalid status level" msgstr "" #: src/dd.c:1348 #, c-format msgid "cannot combine any two of {ascii,ebcdic,ibm}" msgstr "" #: src/dd.c:1350 #, c-format msgid "cannot combine block and unblock" msgstr "" #: src/dd.c:1352 #, c-format msgid "cannot combine lcase and ucase" msgstr "" #: src/dd.c:1354 #, c-format msgid "cannot combine excl and nocreat" msgstr "" #: src/dd.c:1357 #, c-format msgid "cannot combine direct and nocache" msgstr "" #: src/dd.c:1514 #, c-format msgid "" "warning: working around lseek kernel bug for file (%s)\n" " of mt_type=0x%0lx -- see for the list of types" msgstr "" #: src/dd.c:1601 #, c-format msgid "%s: cannot skip" msgstr "" #: src/dd.c:1603 src/dd.c:1622 src/dd.c:1683 #, c-format msgid "%s: cannot seek" msgstr "" #: src/dd.c:1663 #, c-format msgid "offset overflow while reading file %s" msgstr "" #: src/dd.c:1675 #, c-format msgid "warning: invalid file offset after failed read" msgstr "" #: src/dd.c:1679 #, c-format msgid "cannot work around kernel bug after all" msgstr "" #: src/dd.c:1822 #, c-format msgid "setting flags for %s" msgstr "" #: src/dd.c:1922 #, c-format msgid "%s: cannot skip to specified offset" msgstr "" #: src/dd.c:2133 #, c-format msgid "failed to truncate to % bytes in output file %s" msgstr "" #: src/dd.c:2146 #, c-format msgid "fdatasync failed for %s" msgstr "" #: src/dd.c:2156 #, c-format msgid "fsync failed for %s" msgstr "" #: src/dd.c:2207 src/dd.c:2236 src/nohup.c:163 src/nohup.c:165 #, c-format msgid "failed to open %s" msgstr "" #: src/dd.c:2246 #, c-format msgid "" "offset too large: cannot truncate to a length of seek=% (%lu-byte) " "blocks" msgstr "" #: src/dd.c:2267 #, c-format msgid "failed to truncate to % bytes in output file %s" msgstr "" #: src/dd.c:2283 src/dd.c:2289 #, c-format msgid "failed to discard cache for: %s" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/df.c:44 src/du.c:55 src/expr.c:153 src/kill.c:33 src/pathchk.c:32 #: src/shuf.c:39 src/sleep.c:35 src/sort.c:67 msgid "Paul Eggert" msgstr "" #: src/df.c:172 msgid "Filesystem" msgstr "" #: src/df.c:175 msgid "Type" msgstr "" #: src/df.c:178 src/df.c:542 msgid "blocks" msgstr "" #: src/df.c:181 msgid "Used" msgstr "" #: src/df.c:184 msgid "Available" msgstr "" #: src/df.c:187 msgid "Use%" msgstr "" #: src/df.c:190 msgid "Inodes" msgstr "" #: src/df.c:193 msgid "IUsed" msgstr "" #: src/df.c:196 msgid "IFree" msgstr "" #: src/df.c:199 msgid "IUse%" msgstr "" #: src/df.c:202 msgid "Mounted on" msgstr "" #: src/df.c:207 msgid "File" msgstr "" #: src/df.c:387 #, c-format msgid "option --output: field %s unknown" msgstr "" #: src/df.c:394 #, c-format msgid "option --output: field %s used more than once" msgstr "" #: src/df.c:410 src/df.c:449 msgid "Size" msgstr "" #: src/df.c:414 src/df.c:451 msgid "Avail" msgstr "" #: src/df.c:474 msgid "Capacity" msgstr "" #. TRANSLATORS: this is the "1K-blocks" header in "df" output. #. TRANSLATORS: this is the "1024-blocks" header in "df -P". #: src/df.c:545 src/df.c:554 #, c-format msgid "%s-%s" msgstr "" #: src/df.c:1242 #, c-format msgid "cannot access %s: over-mounted by another device" msgstr "" #: src/df.c:1210 msgid "" "Show information about the file system on which each FILE resides,\n" "or all file systems by default.\n" msgstr "" #. TRANSLATORS: The thousands and decimal separators are best #. adjusted to an appropriate default for your locale. #: src/df.c:1420 msgid "" " -a, --all include pseudo, duplicate, inaccessible file " "systems\n" " -B, --block-size=SIZE scale sizes by SIZE before printing them; e.g.,\n" " '-BM' prints sizes in units of 1,048,576 bytes;\n" " see SIZE format below\n" " -h, --human-readable print sizes in powers of 1024 (e.g., 1023M)\n" " -H, --si print sizes in powers of 1000 (e.g., 1.1G)\n" msgstr "" #: src/df.c:1227 msgid "" " -i, --inodes list inode information instead of block usage\n" " -k like --block-size=1K\n" " -l, --local limit listing to local file systems\n" " --no-sync do not invoke sync before getting usage info " "(default)\n" msgstr "" #: src/df.c:1435 msgid "" " --output[=FIELD_LIST] use the output format defined by FIELD_LIST,\n" " or print all fields if FIELD_LIST is " "omitted.\n" " -P, --portability use the POSIX output format\n" " --sync invoke sync before getting usage info\n" msgstr "" #: src/df.c:1441 msgid "" " --total elide all entries insignificant to available space,\n" " and produce a grand total\n" msgstr "" #: src/df.c:1445 msgid "" " -t, --type=TYPE limit listing to file systems of type TYPE\n" " -T, --print-type print file system type\n" " -x, --exclude-type=TYPE limit listing to file systems not of type TYPE\n" " -v (ignored)\n" msgstr "" #: src/df.c:1455 msgid "" "\n" "FIELD_LIST is a comma-separated list of columns to be included. Valid\n" "field names are: 'source', 'fstype', 'itotal', 'iused', 'iavail', 'ipcent',\n" "'size', 'used', 'avail', 'pcent', 'file' and 'target' (see info page).\n" msgstr "" #: src/df.c:1285 #, c-format msgid "options %s and %s are mutually exclusive" msgstr "" #: src/df.c:1442 #, c-format msgid "file system type %s both selected and excluded" msgstr "" #: src/df.c:1500 msgid "Warning: " msgstr "" #: src/df.c:1502 src/stat.c:814 msgid "cannot read table of mounted file systems" msgstr "" #: src/df.c:1539 #, c-format msgid "no file systems processed" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/dircolors.c:35 msgid "H. Peter Anvin" msgstr "" #: src/dircolors.c:97 src/uptime.c:196 src/users.c:105 #, c-format msgid "Usage: %s [OPTION]... [FILE]\n" msgstr "" #: src/dircolors.c:98 msgid "" "Output commands to set the LS_COLORS environment variable.\n" "\n" "Determine format of output:\n" " -b, --sh, --bourne-shell output Bourne shell code to set LS_COLORS\n" " -c, --csh, --c-shell output C shell code to set LS_COLORS\n" " -p, --print-database output defaults\n" msgstr "" #: src/dircolors.c:108 msgid "" "\n" "If FILE is specified, read it to determine which colors to use for which\n" "file types and extensions. Otherwise, a precompiled database is used.\n" "For details on the format of these files, run 'dircolors --print-database'.\n" msgstr "" #: src/dircolors.c:286 #, c-format msgid "%s:%lu: invalid line; missing second token" msgstr "" #: src/dircolors.c:358 #, c-format msgid "%s:%lu: unrecognized keyword %s" msgstr "" #: src/dircolors.c:359 msgid "" msgstr "" #: src/dircolors.c:440 #, c-format msgid "" "the options to output dircolors' internal database and\n" "to select a shell syntax are mutually exclusive" msgstr "" #: src/dircolors.c:450 msgid "file operands cannot be combined with --print-database (-p)" msgstr "" #: src/dircolors.c:473 #, c-format msgid "no SHELL environment variable, and no shell type option given" msgstr "" #: src/dirname.c:50 #, c-format msgid "Usage: %s [OPTION] NAME...\n" msgstr "" #: src/dirname.c:54 msgid "" "Output each NAME with its last non-slash component and trailing slashes\n" "removed; if NAME contains no /'s, output '.' (meaning the current " "directory).\n" "\n" msgstr "" #: src/dirname.c:59 msgid " -z, --zero end each output line with NUL, not newline\n" msgstr "" #: src/dirname.c:64 #, c-format msgid "" "\n" "Examples:\n" " %s /usr/bin/ -> \"/usr\"\n" " %s dir1/str dir2/str -> \"dir1\" followed by \"dir2\"\n" " %s stdio.h -> \".\"\n" msgstr "" #: src/du.c:270 src/sort.c:394 src/wc.c:112 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" " or: %s [OPTION]... --files0-from=F\n" msgstr "" #: src/du.c:284 msgid "" "Summarize disk usage of the set of FILEs, recursively for directories.\n" msgstr "" #: src/du.c:290 msgid "" " -0, --null end each output line with NUL, not newline\n" " -a, --all write counts for all files, not just directories\n" " --apparent-size print apparent sizes, rather than disk usage; " "although\n" " the apparent size is usually smaller, it may be\n" " larger due to holes in ('sparse') files, internal\n" " fragmentation, indirect blocks, and the like\n" msgstr "" #: src/du.c:299 msgid "" " -B, --block-size=SIZE scale sizes by SIZE before printing them; e.g.,\n" " '-BM' prints sizes in units of 1,048,576 bytes;\n" " see SIZE format below\n" " -b, --bytes equivalent to '--apparent-size --block-size=1'\n" " -c, --total produce a grand total\n" " -D, --dereference-args dereference only symlinks that are listed on the\n" " command line\n" " -d, --max-depth=N print the total for a directory (or file, with --" "all)\n" " only if it is N or fewer levels below the command\n" " line argument; --max-depth=0 is the same as\n" " --summarize\n" msgstr "" #: src/du.c:312 msgid "" " --files0-from=F summarize disk usage of the\n" " NUL-terminated file names specified in file F;\n" " if F is -, then read names from standard input\n" " -H equivalent to --dereference-args (-D)\n" " -h, --human-readable print sizes in human readable format (e.g., 1K 234M " "2G)\n" " --inodes list inode usage information instead of block usage\n" msgstr "" #: src/du.c:310 msgid "" " -k like --block-size=1K\n" " -L, --dereference dereference all symbolic links\n" " -l, --count-links count sizes many times if hard linked\n" " -m like --block-size=1M\n" msgstr "" #: src/du.c:327 msgid "" " -P, --no-dereference don't follow any symbolic links (this is the " "default)\n" " -S, --separate-dirs for directories do not include size of " "subdirectories\n" " --si like -h, but use powers of 1000 not 1024\n" " -s, --summarize display only a total for each argument\n" msgstr "" #: src/du.c:333 msgid "" " -t, --threshold=SIZE exclude entries smaller than SIZE if positive,\n" " or entries greater than SIZE if negative\n" " --time show time of the last modification of any file in " "the\n" " directory, or any of its subdirectories\n" " --time=WORD show time as WORD instead of modification time:\n" " atime, access, use, ctime or status\n" " --time-style=STYLE show times using STYLE, which can be:\n" " full-iso, long-iso, iso, or +FORMAT;\n" " FORMAT is interpreted like in 'date'\n" msgstr "" #: src/du.c:333 msgid "" " -X, --exclude-from=FILE exclude files that match any pattern in FILE\n" " --exclude=PATTERN exclude files that match PATTERN\n" " -x, --one-file-system skip directories on different file systems\n" msgstr "" #: src/du.c:386 msgid "Infinity" msgstr "" #: src/du.c:624 #, c-format msgid "fts_read failed: %s" msgstr "" #: src/du.c:780 #, c-format msgid "invalid maximum depth %s" msgstr "" #: src/du.c:809 #, c-format msgid "invalid --threshold argument '-0'" msgstr "" #: src/du.c:887 #, c-format msgid "cannot both summarize and show all entries" msgstr "" #: src/du.c:894 #, c-format msgid "warning: summarizing is the same as using --max-depth=0" msgstr "" #: src/du.c:900 #, c-format msgid "warning: summarizing conflicts with --max-depth=%lu" msgstr "" #: src/du.c:952 #, c-format msgid "warning: options --apparent-size and -b are ineffective with --inodes" msgstr "" #: src/du.c:966 src/sort.c:4533 src/wc.c:668 msgid "file operands cannot be combined with --files0-from" msgstr "" #: src/du.c:1040 src/sort.c:4562 src/wc.c:747 #, c-format msgid "when reading file names from stdin, no file name of %s allowed" msgstr "" #: src/du.c:1057 src/du.c:1065 src/wc.c:760 src/wc.c:768 msgid "invalid zero-length file name" msgstr "" #: src/du.c:1088 src/ls.c:2649 src/wc.c:791 msgid "total" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/echo.c:26 msgid "Brian Fox" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/echo.c:27 msgid "Chet Ramey" msgstr "" #: src/echo.c:41 #, c-format msgid "" "Usage: %s [SHORT-OPTION]... [STRING]...\n" " or: %s LONG-OPTION\n" msgstr "" #: src/echo.c:45 msgid "" "Echo the STRING(s) to standard output.\n" "\n" " -n do not output the trailing newline\n" msgstr "" #: src/echo.c:51 msgid "" " -e enable interpretation of backslash escapes (default)\n" " -E disable interpretation of backslash escapes\n" msgstr "" #: src/echo.c:54 msgid "" " -e enable interpretation of backslash escapes\n" " -E disable interpretation of backslash escapes (default)\n" msgstr "" #: src/echo.c:60 msgid "" "\n" "If -e is in effect, the following sequences are recognized:\n" "\n" msgstr "" #: src/echo.c:65 src/printf.c:105 msgid "" " \\\\ backslash\n" " \\a alert (BEL)\n" " \\b backspace\n" " \\c produce no further output\n" " \\e escape\n" " \\f form feed\n" " \\n new line\n" " \\r carriage return\n" " \\t horizontal tab\n" " \\v vertical tab\n" msgstr "" #: src/echo.c:77 msgid "" " \\0NNN byte with octal value NNN (1 to 3 digits)\n" " \\xHH byte with hexadecimal value HH (1 to 2 digits)\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/env.c:32 src/printenv.c:45 src/whoami.c:35 msgid "Richard Mlynarik" msgstr "" #: src/env.c:52 #, c-format msgid "Usage: %s [OPTION]... [-] [NAME=VALUE]... [COMMAND [ARG]...]\n" msgstr "" #: src/env.c:55 msgid "Set each NAME to VALUE in the environment and run COMMAND.\n" msgstr "" #: src/env.c:61 msgid "" " -i, --ignore-environment start with an empty environment\n" " -0, --null end each output line with NUL, not newline\n" " -u, --unset=NAME remove variable from the environment\n" msgstr "" #: src/env.c:68 msgid "" "\n" "A mere - implies -i. If no COMMAND, print the resulting environment.\n" msgstr "" #: src/env.c:124 #, c-format msgid "cannot unset %s" msgstr "" #: src/env.c:135 #, c-format msgid "cannot set %s" msgstr "" #: src/env.c:152 #, c-format msgid "cannot specify --null (-0) with command" msgstr "" #: src/expand.c:107 msgid "Convert tabs in each FILE to spaces, writing to standard output.\n" msgstr "" #: src/expand.c:114 msgid "" " -i, --initial do not convert tabs after non blanks\n" " -t, --tabs=NUMBER have tabs NUMBER characters apart, not 8\n" msgstr "" #: src/expand.c:118 msgid "" " -t, --tabs=LIST use comma separated list of explicit tab positions\n" msgstr "" #: src/expand.c:171 src/unexpand.c:190 #, c-format msgid "tab stop is too large %s" msgstr "" #: src/expand.c:179 src/unexpand.c:198 #, c-format msgid "tab size contains invalid character(s): %s" msgstr "" #: src/expand.c:205 src/unexpand.c:224 #, c-format msgid "tab size cannot be 0" msgstr "" #: src/expand.c:207 src/unexpand.c:226 #, c-format msgid "tab sizes must be ascending" msgstr "" #: src/expand.c:325 src/expand.c:344 src/unexpand.c:373 src/unexpand.c:418 #, c-format msgid "input line is too long" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/expr.c:151 src/ln.c:41 src/mv.c:41 src/tee.c:34 msgid "Mike Parker" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/expr.c:152 src/groups.c:36 msgid "James Youngman" msgstr "" #: src/expr.c:203 #, c-format msgid "" "Usage: %s EXPRESSION\n" " or: %s OPTION\n" msgstr "" #: src/expr.c:211 msgid "" "\n" "Print the value of EXPRESSION to standard output. A blank line below\n" "separates increasing precedence groups. EXPRESSION may be:\n" "\n" " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" "\n" " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" msgstr "" #: src/expr.c:220 msgid "" "\n" " ARG1 < ARG2 ARG1 is less than ARG2\n" " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" " ARG1 = ARG2 ARG1 is equal to ARG2\n" " ARG1 != ARG2 ARG1 is unequal to ARG2\n" " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" " ARG1 > ARG2 ARG1 is greater than ARG2\n" msgstr "" #: src/expr.c:229 msgid "" "\n" " ARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" " ARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" msgstr "" #: src/expr.c:236 #, no-c-format msgid "" "\n" " ARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" " ARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" " ARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" msgstr "" #: src/expr.c:242 msgid "" "\n" " STRING : REGEXP anchored pattern match of REGEXP in STRING\n" "\n" " match STRING REGEXP same as STRING : REGEXP\n" " substr STRING POS LENGTH substring of STRING, POS counted from 1\n" " index STRING CHARS index in STRING where any CHARS is found, or 0\n" " length STRING length of STRING\n" msgstr "" #: src/expr.c:251 msgid "" " + TOKEN interpret TOKEN as a string, even if it is a\n" " keyword like 'match' or an operator like '/'\n" "\n" " ( EXPRESSION ) value of EXPRESSION\n" msgstr "" #: src/expr.c:257 msgid "" "\n" "Beware that many operators need to be escaped or quoted for shells.\n" "Comparisons are arithmetic if both ARGs are numbers, else lexicographical.\n" "Pattern matches return the string matched between \\( and \\) or null; if\n" "\\( and \\) are not used, they return the number of characters matched or " "0.\n" msgstr "" #: src/expr.c:264 msgid "" "\n" "Exit status is 0 if EXPRESSION is neither null nor 0, 1 if EXPRESSION is " "null\n" "or 0, 2 if EXPRESSION is syntactically invalid, and 3 if an error occurred.\n" msgstr "" #: src/expr.c:278 #, c-format msgid "syntax error" msgstr "" #: src/expr.c:599 src/ptx.c:283 #, c-format msgid "error in regular expression matcher" msgstr "" #: src/expr.c:791 src/expr.c:828 #, c-format msgid "non-integer argument" msgstr "" #: src/expr.c:793 src/truncate.c:314 #, c-format msgid "division by zero" msgstr "" #: src/expr.c:887 src/sort.c:2044 #, c-format msgid "set LC_ALL='C' to work around the problem" msgstr "" #: src/expr.c:889 #, c-format msgid "the strings compared were %s and %s" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/factor.c:111 msgid "Niels Moller" msgstr "" #: src/factor.c:1283 src/factor.c:1383 src/factor.c:1459 #, c-format msgid "Lucas prime test failure. This should not happen" msgstr "" #: src/factor.c:2092 #, c-format msgid "squfof queue overflow" msgstr "" #: src/factor.c:2419 #, c-format msgid "%s is not a valid positive integer" msgstr "" #: src/factor.c:2442 src/od.c:1646 src/od.c:1715 #, c-format msgid "%s is too large" msgstr "" #: src/factor.c:2454 #, c-format msgid "" "Usage: %s [NUMBER]...\n" " or: %s OPTION\n" msgstr "" #: src/factor.c:2459 msgid "" "Print the prime factors of each specified integer NUMBER. If none\n" "are specified on the command line, read them from standard input.\n" "\n" msgstr "" #: src/find-mount-point.c:40 #, c-format msgid "cannot get current directory" msgstr "" #: src/find-mount-point.c:50 src/find-mount-point.c:64 #: src/find-mount-point.c:92 #, c-format msgid "cannot change to directory %s" msgstr "" #: src/find-mount-point.c:70 #, c-format msgid "cannot stat current directory (now %s)" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/fmt.c:38 msgid "Ross Paterson" msgstr "" #: src/fmt.c:270 #, c-format msgid "Usage: %s [-WIDTH] [OPTION]... [FILE]...\n" msgstr "" #: src/fmt.c:271 msgid "" "Reformat each paragraph in the FILE(s), writing to standard output.\n" "The option -WIDTH is an abbreviated form of --width=DIGITS.\n" msgstr "" #: src/fmt.c:278 msgid "" " -c, --crown-margin preserve indentation of first two lines\n" " -p, --prefix=STRING reformat only lines beginning with STRING,\n" " reattaching the prefix to reformatted lines\n" " -s, --split-only split long lines, but do not refill\n" msgstr "" #: src/fmt.c:287 #, no-c-format msgid "" " -t, --tagged-paragraph indentation of first line different from second\n" " -u, --uniform-spacing one space between words, two after sentences\n" " -w, --width=WIDTH maximum line width (default of 75 columns)\n" " -g, --goal=WIDTH goal width (default of 93% of width)\n" msgstr "" #: src/fmt.c:359 #, c-format msgid "" "invalid option -- %c; -WIDTH is recognized only when it is the first\n" "option; use -w N instead" msgstr "" #: src/fmt.c:399 src/fmt.c:406 msgid "invalid width" msgstr "" #: src/fold.c:69 msgid "Wrap input lines in each FILE, writing to standard output.\n" msgstr "" #: src/fold.c:77 msgid "" " -b, --bytes count bytes rather than columns\n" " -s, --spaces break at spaces\n" " -w, --width=WIDTH use WIDTH columns instead of 80\n" msgstr "" #: src/fold.c:283 src/pr.c:830 msgid "invalid number of columns" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/getlimits.c:29 src/realpath.c:33 src/stdbuf.c:37 src/timeout.c:78 #: src/truncate.c:37 msgid "Padraig Brady" msgstr "" #: src/getlimits.c:65 #, c-format msgid "Usage: %s\n" msgstr "" #: src/getlimits.c:69 msgid "" "Output platform dependent limits in a format useful for shell scripts.\n" "\n" msgstr "" #: src/group-list.c:69 src/id.c:365 src/setuidgid.c:184 #, c-format msgid "failed to get groups for user %s" msgstr "" #: src/group-list.c:74 src/id.c:370 #, c-format msgid "failed to get groups for the current process" msgstr "" #: src/group-list.c:114 #, c-format msgid "cannot find name for group ID %lu" msgstr "" #: src/groups.c:53 #, c-format msgid "Usage: %s [OPTION]... [USERNAME]...\n" msgstr "" #: src/groups.c:54 msgid "" "Print group memberships for each USERNAME or, if no USERNAME is specified, " "for\n" "the current process (which may differ if the groups database has changed).\n" msgstr "" #: src/groups.c:105 src/id.c:233 #, c-format msgid "cannot get real UID" msgstr "" #: src/groups.c:110 src/id.c:241 #, c-format msgid "cannot get effective GID" msgstr "" #: src/groups.c:115 src/id.c:246 #, c-format msgid "cannot get real GID" msgstr "" #: src/groups.c:128 src/id.c:206 #, c-format msgid "%s: no such user" msgstr "" #: src/head.c:113 #, c-format msgid "" "Print the first %d lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" msgstr "" #: src/head.c:121 #, c-format msgid "" " -c, --bytes=[-]NUM print the first NUM bytes of each file;\n" " with the leading '-', print all but the last\n" " NUM bytes of each file\n" " -n, --lines=[-]NUM print the first NUM lines instead of the first " "%d;\n" " with the leading '-', print all but the last\n" " NUM lines of each file\n" msgstr "" #: src/head.c:125 msgid "" " -q, --quiet, --silent never print headers giving file names\n" " -v, --verbose always print headers giving file names\n" msgstr "" #: src/head.c:138 msgid "" "\n" "NUM may have a multiplier suffix:\n" "b 512, kB 1000, K 1024, MB 1000*1000, M 1024*1024,\n" "GB 1000*1000*1000, G 1024*1024*1024, and so on for T, P, E, Z, Y.\n" msgstr "" #: src/head.c:154 #, c-format msgid "%s: file has shrunk too much" msgstr "" #: src/head.c:612 src/head.c:691 src/tail.c:449 #, c-format msgid "%s: cannot seek to offset %s" msgstr "" #: src/tail.c:453 #, c-format msgid "%s: cannot seek to relative offset %s" msgstr "" #: src/head.c:227 src/head.c:1051 #, c-format msgid "%s: number of bytes is too large" msgstr "" #: src/head.c:893 src/tail.c:1947 msgid "invalid number of lines" msgstr "" #: src/head.c:894 src/tail.c:1948 msgid "invalid number of bytes" msgstr "" #: src/head.c:981 src/head.c:1039 #, c-format msgid "invalid trailing option -- %c" msgstr "" #: src/hostid.c:42 #, c-format msgid "" "Usage: %s [OPTION]\n" "Print the numeric identifier (in hexadecimal) for the current host.\n" "\n" msgstr "" #: src/hostname.c:56 #, c-format msgid "" "Usage: %s [NAME]\n" " or: %s OPTION\n" "Print or set the hostname of the current system.\n" "\n" msgstr "" #: src/hostname.c:94 #, c-format msgid "cannot set name to %s" msgstr "" #: src/hostname.c:97 #, c-format msgid "cannot set hostname; this system lacks the functionality" msgstr "" #: src/hostname.c:105 #, c-format msgid "cannot determine hostname" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/id.c:38 src/touch.c:42 msgid "Arnold Robbins" msgstr "" #: src/id.c:84 #, c-format msgid "Usage: %s [OPTION]... [USER]\n" msgstr "" #: src/id.c:85 msgid "" "Print user and group information for the specified USER,\n" "or (when USER omitted) for the current user.\n" "\n" msgstr "" #: src/id.c:90 msgid "" " -a ignore, for compatibility with other versions\n" " -Z, --context print only the security context of the process\n" " -g, --group print only the effective group ID\n" " -G, --groups print all group IDs\n" " -n, --name print a name instead of a number, for -ugG\n" " -r, --real print the real ID instead of the effective ID, with -ugG\n" " -u, --user print only the effective user ID\n" " -z, --zero delimit entries with NUL characters, not whitespace;\n" " not permitted in default format\n" msgstr "" #: src/id.c:96 msgid "" "\n" "Without any OPTION, print some useful set of identified information.\n" msgstr "" #: src/id.c:151 #, c-format msgid "--context (-Z) works only on an SELinux/SMACK-enabled kernel" msgstr "" #: src/id.c:140 #, c-format msgid "--context (-Z) works only on an SELinux-enabled kernel" msgstr "" #: src/id.c:175 #, c-format msgid "cannot print security context when user specified" msgstr "" #: src/id.c:178 #, c-format msgid "cannot print \"only\" of more than one choice" msgstr "" #: src/id.c:185 #, c-format msgid "cannot print only names or real IDs in default format" msgstr "" #: src/id.c:209 #, c-format msgid "option --zero not permitted in default format" msgstr "" #: src/id.c:199 #, c-format msgid "can't get process context" msgstr "" #: src/id.c:224 #, c-format msgid "cannot get effective UID" msgstr "" #: src/id.c:311 #, c-format msgid "cannot find name for user ID %s" msgstr "" #: src/id.c:329 #, c-format msgid "uid=%s" msgstr "" #: src/id.c:334 #, c-format msgid " gid=%s" msgstr "" #: src/id.c:341 #, c-format msgid " euid=%s" msgstr "" #: src/id.c:349 #, c-format msgid " egid=%s" msgstr "" #: src/id.c:377 msgid " groups=" msgstr "" #: src/id.c:393 #, c-format msgid " context=%s" msgstr "" #: src/install.c:373 #, c-format msgid "warning: %s: failed to change context to %s" msgstr "" #: src/install.c:414 #, c-format msgid "creating directory %s" msgstr "" #: src/install.c:482 #, c-format msgid "cannot change ownership of %s" msgstr "" #: src/install.c:506 #, c-format msgid "cannot set time stamps for %s" msgstr "" #: src/install.c:527 src/split.c:426 src/timeout.c:439 #, c-format msgid "fork system call failed" msgstr "" #: src/install.c:531 #, c-format msgid "cannot run %s" msgstr "" #: src/install.c:535 #, c-format msgid "waiting for strip" msgstr "" #: src/install.c:537 #, c-format msgid "strip process terminated abnormally" msgstr "" #: src/install.c:558 #, c-format msgid "invalid user %s" msgstr "" #: src/install.c:594 #, c-format msgid "" "Usage: %s [OPTION]... [-T] SOURCE DEST\n" " or: %s [OPTION]... SOURCE... DIRECTORY\n" " or: %s [OPTION]... -t DIRECTORY SOURCE...\n" " or: %s [OPTION]... -d DIRECTORY...\n" msgstr "" #: src/install.c:601 msgid "" "\n" "This install program copies files (often just compiled) into destination\n" "locations you choose. If you want to download and install a ready-to-use\n" "package on a GNU/Linux system, you should instead be using a package " "manager\n" "like yum(1) or apt-get(1).\n" "\n" "In the first three forms, copy SOURCE to DEST or multiple SOURCE(s) to\n" "the existing DIRECTORY, while setting permission modes and owner/group.\n" "In the 4th form, create all components of the given DIRECTORY(ies).\n" msgstr "" #: src/install.c:615 msgid "" " --backup[=CONTROL] make a backup of each existing destination file\n" " -b like --backup but does not accept an argument\n" " -c (ignored)\n" " -C, --compare compare each pair of source and destination files, " "and\n" " in some cases, do not modify the destination at all\n" " -d, --directory treat all arguments as directory names; create all\n" " components of the specified directories\n" msgstr "" #: src/install.c:633 msgid "" " -D create all leading components of DEST except the " "last,\n" " or all components of --target-directory,\n" " then copy SOURCE to DEST\n" " -g, --group=GROUP set group ownership, instead of process' current " "group\n" " -m, --mode=MODE set permission mode (as in chmod), instead of rwxr-xr-" "x\n" " -o, --owner=OWNER set ownership (super-user only)\n" msgstr "" #: src/install.c:631 msgid "" " -p, --preserve-timestamps apply access/modification times of SOURCE " "files\n" " to corresponding destination files\n" " -s, --strip strip symbol tables\n" " --strip-program=PROGRAM program used to strip binaries\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" " -t, --target-directory=DIRECTORY copy all SOURCE arguments into " "DIRECTORY\n" " -T, --no-target-directory treat DEST as a normal file\n" " -v, --verbose print the name of each directory as it is created\n" msgstr "" #: src/install.c:651 msgid "" " --preserve-context preserve SELinux security context\n" " -Z set SELinux security context of destination\n" " file to default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the\n" " SELinux or SMACK security context to CTX\n" msgstr "" #: src/unlink.c:86 #, c-format msgid "cannot unlink %s" msgstr "" #: src/install.c:859 #, c-format msgid "" "WARNING: ignoring --preserve-context; this kernel is not SELinux-enabled" msgstr "" #: src/install.c:886 #, c-format msgid "the strip option may not be used when installing a directory" msgstr "" #: src/install.c:889 #, c-format msgid "target directory not allowed when installing a directory" msgstr "" #: src/install.c:947 src/mkdir.c:201 src/stdbuf.c:326 #, c-format msgid "invalid mode %s" msgstr "" #: src/install.c:954 #, c-format msgid "" "WARNING: ignoring --strip-program option as -s option was not specified" msgstr "" #: src/install.c:959 #, c-format msgid "" "options --compare (-C) and --preserve-timestamps are mutually exclusive" msgstr "" #: src/install.c:966 #, c-format msgid "options --compare (-C) and --strip are mutually exclusive" msgstr "" #: src/install.c:972 #, c-format msgid "" "the --compare (-C) option is ignored when you specify a mode with non-" "permission bits" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/join.c:40 src/sort.c:66 msgid "Mike Haertel" msgstr "" #: src/join.c:195 msgid "" "For each pair of input lines with identical join fields, write a line to\n" "standard output. The default join field is the first, delimited by blanks.\n" msgstr "" #: src/join.c:204 msgid "" "\n" " -a FILENUM also print unpairable lines from file FILENUM, where\n" " FILENUM is 1 or 2, corresponding to FILE1 or FILE2\n" " -e EMPTY replace missing input fields with EMPTY\n" msgstr "" #: src/join.c:200 msgid "" " -i, --ignore-case ignore differences in case when comparing fields\n" " -j FIELD equivalent to '-1 FIELD -2 FIELD'\n" " -o FORMAT obey FORMAT while constructing output line\n" " -t CHAR use CHAR as input and output field separator\n" msgstr "" #: src/join.c:206 msgid "" " -v FILENUM like -a FILENUM, but suppress joined output lines\n" " -1 FIELD join on this FIELD of file 1\n" " -2 FIELD join on this FIELD of file 2\n" " --check-order check that the input is correctly sorted, even\n" " if all input lines are pairable\n" " --nocheck-order do not check that the input is correctly sorted\n" " --header treat the first line in each file as field headers,\n" " print them without trying to pair them\n" msgstr "" #: src/join.c:226 src/shuf.c:82 src/sort.c:507 src/uniq.c:205 msgid " -z, --zero-terminated line delimiter is NUL, not newline\n" msgstr "" #: src/join.c:218 msgid "" "\n" "Unless -t CHAR is given, leading blanks separate fields and are ignored,\n" "else fields are separated by CHAR. Any FIELD is a field number counted\n" "from 1. FORMAT is one or more comma or blank separated specifications,\n" "each being 'FILENUM.FIELD' or '0'. Default FORMAT outputs the join field,\n" "the remaining fields from FILE1, the remaining fields from FILE2, all\n" "separated by CHAR. If FORMAT is the keyword 'auto', then the first\n" "line of each file determines the number of fields output for each line.\n" "\n" "Important: FILE1 and FILE2 must be sorted on the join fields.\n" "E.g., use \"sort -k 1b,1\" if 'join' has no options,\n" "or use \"join -t ''\" if 'sort' has no options.\n" "Note, comparisons honor the rules specified by 'LC_COLLATE'.\n" "If the input is not sorted and some lines cannot be joined, a\n" "warning message will be given.\n" msgstr "" #: src/join.c:403 #, c-format msgid "%s:%: is not sorted: %.*s" msgstr "" #: src/join.c:840 src/join.c:1038 #, c-format msgid "invalid field number: %s" msgstr "" #: src/join.c:861 src/join.c:870 #, c-format msgid "invalid field specifier: %s" msgstr "" #: src/join.c:877 #, c-format msgid "invalid file number in field spec: %s" msgstr "" #: src/join.c:920 #, c-format msgid "incompatible join fields %lu, %lu" msgstr "" #: src/join.c:1049 #, c-format msgid "conflicting empty-field replacement strings" msgstr "" #: src/join.c:1101 src/sort.c:4468 #, c-format msgid "multi-character tab %s" msgstr "" #: src/join.c:1105 src/sort.c:4473 #, c-format msgid "incompatible tabs" msgstr "" #: src/join.c:1174 #, c-format msgid "both files cannot be standard input" msgstr "" #: src/kill.c:76 #, c-format msgid "" "Usage: %s [-s SIGNAL | -SIGNAL] PID...\n" " or: %s -l [SIGNAL]...\n" " or: %s -t [SIGNAL]...\n" msgstr "" #: src/kill.c:82 msgid "Send signals to processes, or list signals.\n" msgstr "" #: src/kill.c:88 msgid "" " -s, --signal=SIGNAL, -SIGNAL\n" " specify the name or number of the signal to be sent\n" " -l, --list list signal names, or convert signal names to/from " "numbers\n" " -t, --table print a table of signal information\n" msgstr "" #: src/kill.c:96 msgid "" "\n" "SIGNAL may be a signal name like 'HUP', or a signal number like '1',\n" "or the exit status of a process terminated by a signal.\n" "PID is an integer; if negative it identifies a process group.\n" msgstr "" #: src/kill.c:205 #, c-format msgid "%s: invalid process id" msgstr "" #: src/kill.c:259 #, c-format msgid "invalid option -- %c" msgstr "" #: src/kill.c:268 #, c-format msgid "%s: multiple signals specified" msgstr "" #: src/kill.c:282 #, c-format msgid "multiple -l or -t options specified" msgstr "" #: src/kill.c:299 #, c-format msgid "cannot combine signal with -l or -t" msgstr "" #: src/kill.c:305 #, c-format msgid "no process ID specified" msgstr "" #: src/libstdbuf.c:109 #, c-format msgid "failed to allocate a % byte stdio buffer\n" msgstr "" #: src/libstdbuf.c:116 #, c-format msgid "invalid buffering mode %s for %s\n" msgstr "" #: src/libstdbuf.c:124 #, c-format msgid "could not set buffering of %s to mode %s\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/link.c:36 src/unlink.c:36 src/who.c:50 msgid "Michael Stone" msgstr "" #: src/link.c:45 #, c-format msgid "" "Usage: %s FILE1 FILE2\n" " or: %s OPTION\n" msgstr "" #: src/link.c:48 msgid "" "Call the link function to create a link named FILE2 to an existing FILE1.\n" "\n" msgstr "" #: src/link.c:90 #, c-format msgid "cannot create link %s to %s" msgstr "" #: src/ln.c:190 #, c-format msgid "%s: hard link not allowed for directory" msgstr "" #: src/ln.c:255 #, c-format msgid "%s: cannot overwrite directory" msgstr "" #: src/ln.c:260 #, c-format msgid "%s: replace %s? " msgstr "" #: src/ln.c:345 #, c-format msgid "failed to create symbolic link %s" msgstr "" #: src/ln.c:346 #, c-format msgid "failed to create symbolic link %s -> %s" msgstr "" #: src/ln.c:348 #, c-format msgid "failed to create hard link to %.0s%s" msgstr "" #: src/ln.c:351 #, c-format msgid "failed to create hard link %s" msgstr "" #: src/ln.c:352 #, c-format msgid "failed to create hard link %s => %s" msgstr "" #: src/ln.c:374 #, c-format msgid "" "Usage: %s [OPTION]... [-T] TARGET LINK_NAME (1st form)\n" " or: %s [OPTION]... TARGET (2nd form)\n" " or: %s [OPTION]... TARGET... DIRECTORY (3rd form)\n" " or: %s [OPTION]... -t DIRECTORY TARGET... (4th form)\n" msgstr "" #: src/ln.c:381 msgid "" "In the 1st form, create a link to TARGET with the name LINK_NAME.\n" "In the 2nd form, create a link to TARGET in the current directory.\n" "In the 3rd and 4th forms, create links to each TARGET in DIRECTORY.\n" "Create hard links by default, symbolic links with --symbolic.\n" "By default, each destination (name of new link) should not already exist.\n" "When creating hard links, each TARGET must exist. Symbolic links\n" "can hold arbitrary text; if later resolved, a relative link is\n" "interpreted in relation to its parent directory.\n" msgstr "" #: src/ln.c:394 msgid "" " --backup[=CONTROL] make a backup of each existing destination " "file\n" " -b like --backup but does not accept an argument\n" " -d, -F, --directory allow the superuser to attempt to hard link\n" " directories (note: will probably fail due " "to\n" " system restrictions, even for the " "superuser)\n" " -f, --force remove existing destination files\n" msgstr "" #: src/ln.c:402 msgid "" " -i, --interactive prompt whether to remove destinations\n" " -L, --logical dereference TARGETs that are symbolic links\n" " -n, --no-dereference treat LINK_NAME as a normal file if\n" " it is a symbolic link to a directory\n" " -P, --physical make hard links directly to symbolic links\n" " -r, --relative create symbolic links relative to link " "location\n" " -s, --symbolic make symbolic links instead of hard links\n" msgstr "" #: src/ln.c:411 msgid "" " -S, --suffix=SUFFIX override the usual backup suffix\n" " -t, --target-directory=DIRECTORY specify the DIRECTORY in which to " "create\n" " the links\n" " -T, --no-target-directory treat LINK_NAME as a normal file always\n" " -v, --verbose print name of each linked file\n" msgstr "" #: src/ln.c:433 #, c-format msgid "" "\n" "Using -s ignores -L and -P. Otherwise, the last option specified controls\n" "behavior when a TARGET is a symbolic link, defaulting to %s.\n" msgstr "" #: src/ln.c:554 #, c-format msgid "cannot combine --target-directory and --no-target-directory" msgstr "" #: src/ln.c:588 #, c-format msgid "cannot do --relative without --symbolic" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/logname.c:30 msgid "FIXME: unknown" msgstr "" #: src/logname.c:39 src/sync.c:40 #, c-format msgid "Usage: %s [OPTION]\n" msgstr "" #: src/logname.c:40 msgid "" "Print the name of the current user.\n" "\n" msgstr "" #: src/logname.c:84 #, c-format msgid "no login name" msgstr "" #. TRANSLATORS: ls output needs to be aligned for ease of reading, #. so be wary of using variable width fields from the locale. #. Note %b is handled specially by ls and aligned correctly. #. Note also that specifying a width as in %5b is erroneous as strftime #. will count bytes rather than characters in multibyte locales. #: src/ls.c:732 msgid "%b %e %Y" msgstr "" #. TRANSLATORS: ls output needs to be aligned for ease of reading, #. so be wary of using variable width fields from the locale. #. Note %b is handled specially by ls and aligned correctly. #. Note also that specifying a width as in %5b is erroneous as strftime #. will count bytes rather than characters in multibyte locales. #: src/ls.c:745 msgid "%b %e %H:%M" msgstr "" #: src/ls.c:1599 #, c-format msgid "ignoring invalid width in environment variable COLUMNS: %s" msgstr "" #: src/ls.c:1629 #, c-format msgid "ignoring invalid tab size in environment variable TABSIZE: %s" msgstr "" #: src/ls.c:1767 msgid "invalid line width" msgstr "" #: src/ls.c:1836 msgid "invalid tab size" msgstr "" #: src/ls.c:2033 #, c-format msgid "invalid time style format %s" msgstr "" #: src/ls.c:2057 msgid "Valid arguments are:\n" msgstr "" #: src/ls.c:2061 msgid " - +FORMAT (e.g., +%H:%M) for a 'date'-style format\n" msgstr "" #: src/ls.c:2096 #, c-format msgid "error initializing month strings" msgstr "" #: src/ls.c:2407 #, c-format msgid "unrecognized prefix: %s" msgstr "" #: src/ls.c:2437 #, c-format msgid "unparsable value for LS_COLORS environment variable" msgstr "" #: src/ls.c:1580 #, c-format msgid "ignoring invalid value of environment variable QUOTING_STYLE: %s" msgstr "" #: src/ls.c:2514 src/pwd.c:161 #, c-format msgid "cannot open directory %s" msgstr "" #: src/ls.c:2529 #, c-format msgid "cannot determine device and inode of %s" msgstr "" #: src/ls.c:2538 #, c-format msgid "%s: not listing already-listed directory" msgstr "" #: src/ls.c:2615 src/pwd.c:229 #, c-format msgid "reading directory %s" msgstr "" #: src/ls.c:2630 #, c-format msgid "closing directory %s" msgstr "" #: src/ls.c:3302 #, c-format msgid "cannot compare file names %s and %s" msgstr "" #: src/ls.c:4721 msgid "" "List information about the FILEs (the current directory by default).\n" "Sort entries alphabetically if none of -cftuvSUX nor --sort is specified.\n" msgstr "" #: src/ls.c:4728 msgid "" " -a, --all do not ignore entries starting with .\n" " -A, --almost-all do not list implied . and ..\n" " --author with -l, print the author of each file\n" " -b, --escape print C-style escapes for nongraphic " "characters\n" msgstr "" #: src/ls.c:4829 msgid "" " --block-size=SIZE scale sizes by SIZE before printing them; " "e.g.,\n" " '--block-size=M' prints sizes in units of\n" " 1,048,576 bytes; see SIZE format below\n" " -B, --ignore-backups do not list implied entries ending with ~\n" " -c with -lt: sort by, and show, ctime (time of " "last\n" " modification of file status information);\n" " with -l: show ctime and sort by name;\n" " otherwise: sort by ctime, newest first\n" msgstr "" #: src/ls.c:4839 msgid "" " -C list entries by columns\n" " --color[=WHEN] colorize the output; WHEN can be 'always' " "(default\n" " if omitted), 'auto', or 'never'; more info " "below\n" " -d, --directory list directories themselves, not their " "contents\n" " -D, --dired generate output designed for Emacs' dired mode\n" msgstr "" #: src/ls.c:4752 msgid "" " -f do not sort, enable -aU, disable -ls --color\n" " -F, --classify append indicator (one of */=>@|) to entries\n" " --file-type likewise, except do not append '*'\n" " --format=WORD across -x, commas -m, horizontal -x, long -l,\n" " single-column -1, verbose -l, vertical -C\n" " --full-time like -l --time-style=full-iso\n" msgstr "" #: src/ls.c:4760 msgid " -g like -l, but do not list owner\n" msgstr "" #: src/ls.c:4859 msgid "" " --group-directories-first\n" " group directories before files;\n" " can be augmented with a --sort option, but " "any\n" " use of --sort=none (-U) disables grouping\n" msgstr "" #: src/ls.c:4865 msgid "" " -G, --no-group in a long listing, don't print group names\n" " -h, --human-readable with -l and/or -s, print human readable sizes\n" " (e.g., 1K 234M 2G)\n" " --si likewise, but use powers of 1000 not 1024\n" msgstr "" #: src/ls.c:4871 msgid "" " -H, --dereference-command-line\n" " follow symbolic links listed on the command " "line\n" " --dereference-command-line-symlink-to-dir\n" " follow each command line symbolic link\n" " that points to a directory\n" " --hide=PATTERN do not list implied entries matching shell " "PATTERN\n" " (overridden by -a or -A)\n" msgstr "" #: src/ls.c:4881 msgid "" " --indicator-style=WORD append indicator with style WORD to entry " "names:\n" " none (default), slash (-p),\n" " file-type (--file-type), classify (-F)\n" " -i, --inode print the index number of each file\n" " -I, --ignore=PATTERN do not list implied entries matching shell " "PATTERN\n" " -k, --kibibytes default to 1024-byte blocks for disk usage\n" msgstr "" #: src/ls.c:4795 msgid "" " -l use a long listing format\n" " -L, --dereference when showing file information for a symbolic\n" " link, show information for the file the link\n" " references rather than for the link itself\n" " -m fill width with a comma separated list of " "entries\n" msgstr "" #: src/ls.c:4803 msgid "" " -n, --numeric-uid-gid like -l, but list numeric user and group IDs\n" " -N, --literal print raw entry names (don't treat e.g. " "control\n" " characters specially)\n" " -o like -l, but do not list group information\n" " -p, --indicator-style=slash\n" " append / indicator to directories\n" msgstr "" #: src/ls.c:4907 msgid "" " -q, --hide-control-chars print ? instead of nongraphic characters\n" " --show-control-chars show nongraphic characters as-is (the default,\n" " unless program is 'ls' and output is a " "terminal)\n" " -Q, --quote-name enclose entry names in double quotes\n" " --quoting-style=WORD use quoting style WORD for entry names:\n" " literal, locale, shell, shell-always,\n" " shell-escape, shell-escape-always, c, escape\n" msgstr "" #: src/ls.c:4820 msgid "" " -r, --reverse reverse order while sorting\n" " -R, --recursive list subdirectories recursively\n" " -s, --size print the allocated size of each file, in " "blocks\n" msgstr "" #: src/ls.c:4922 msgid "" " -S sort by file size, largest first\n" " --sort=WORD sort by WORD instead of name: none (-U), size (-" "S),\n" " time (-t), version (-v), extension (-X)\n" " --time=WORD with -l, show time as WORD instead of default\n" " modification time: atime or access or use (-" "u);\n" " ctime or status (-c); also use specified " "time\n" " as sort key if --sort=time (newest first)\n" msgstr "" #: src/ls.c:4933 msgid "" " --time-style=STYLE with -l, show times using style STYLE:\n" " full-iso, long-iso, iso, locale, or +FORMAT;\n" " FORMAT is interpreted like in 'date'; if " "FORMAT\n" " is FORMAT1FORMAT2, then FORMAT1 " "applies\n" " to non-recent files and FORMAT2 to recent " "files;\n" " if STYLE is prefixed with 'posix-', STYLE\n" " takes effect only outside the POSIX locale\n" msgstr "" #: src/ls.c:4844 msgid "" " -t sort by modification time, newest first\n" " -T, --tabsize=COLS assume tab stops at each COLS instead of 8\n" msgstr "" #: src/ls.c:4949 msgid "" " -u with -lt: sort by, and show, access time;\n" " with -l: show access time and sort by name;\n" " otherwise: sort by access time, newest first\n" " -U do not sort; list entries in directory order\n" " -v natural sort of (version) numbers within text\n" msgstr "" #: src/ls.c:4956 msgid "" " -w, --width=COLS set output width to COLS. 0 means no limit\n" " -x list entries by lines instead of by columns\n" " -X sort alphabetically by entry extension\n" " -Z, --context print any security context of each file\n" " -1 list one file per line. Avoid '\\n' with -q or " "-b\n" msgstr "" #: src/ls.c:4865 msgid "" "\n" "Using color to distinguish file types is disabled both by default and\n" "with --color=never. With --color=auto, ls emits color codes only when\n" "standard output is connected to a terminal. The LS_COLORS environment\n" "variable can change the settings. Use the dircolors command to set it.\n" msgstr "" #: src/ls.c:4872 msgid "" "\n" "Exit status:\n" " 0 if OK,\n" " 1 if minor problems (e.g., cannot access subdirectory),\n" " 2 if serious trouble (e.g., cannot access command-line argument).\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/md5sum.c:94 src/seq.c:39 msgid "Ulrich Drepper" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/md5sum.c:95 msgid "Scott Miller" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/md5sum.c:96 msgid "David Madore" msgstr "" #: src/md5sum.c:169 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" "Print or check %s (%d-bit) checksums.\n" msgstr "" #: src/md5sum.c:180 msgid "" "\n" " -b, --binary read in binary mode (default unless reading tty " "stdin)\n" msgstr "" #: src/md5sum.c:185 msgid "" "\n" " -b, --binary read in binary mode\n" msgstr "" #: src/md5sum.c:181 #, c-format msgid " -c, --check read %s sums from the FILEs and check them\n" msgstr "" #: src/md5sum.c:184 msgid " --tag create a BSD-style checksum\n" msgstr "" #: src/md5sum.c:188 msgid "" " -t, --text read in text mode (default if reading tty stdin)\n" msgstr "" #: src/md5sum.c:192 msgid " -t, --text read in text mode (default)\n" msgstr "" #: src/md5sum.c:203 msgid "" "\n" "The following five options are useful only when verifying checksums:\n" " --ignore-missing don't fail or report status for missing files\n" " --quiet don't print OK for each successfully verified file\n" " --status don't output anything, status code shows success\n" " --strict exit non-zero for improperly formatted checksum " "lines\n" " -w, --warn warn about improperly formatted checksum lines\n" "\n" msgstr "" #: src/md5sum.c:215 #, c-format msgid "" "\n" "The sums are computed as described in %s. When checking, the input\n" "should be a former output of this program. The default mode is to print a\n" "line with checksum, a space, a character indicating input mode ('*' for " "binary,\n" "' ' for text or where binary is insignificant), and name for each FILE.\n" msgstr "" #: src/md5sum.c:523 #, c-format msgid "%s: too many checksum lines" msgstr "" #: src/md5sum.c:547 #, c-format msgid "%s: %: improperly formatted %s checksum line" msgstr "" #: src/md5sum.c:623 msgid "FAILED open or read" msgstr "" #: src/md5sum.c:595 msgid "FAILED" msgstr "" #: src/md5sum.c:597 msgid "OK" msgstr "" #: src/md5sum.c:621 #, c-format msgid "%s: no properly formatted %s checksum lines found" msgstr "" #: src/md5sum.c:631 #, c-format msgid "WARNING: % line is improperly formatted" msgid_plural "WARNING: % lines are improperly formatted" msgstr[0] "" msgstr[1] "" #: src/md5sum.c:639 #, c-format msgid "WARNING: % listed file could not be read" msgid_plural "WARNING: % listed files could not be read" msgstr[0] "" msgstr[1] "" #: src/md5sum.c:647 #, c-format msgid "WARNING: % computed checksum did NOT match" msgid_plural "WARNING: % computed checksums did NOT match" msgstr[0] "" msgstr[1] "" #: src/md5sum.c:720 #, c-format msgid "%s: no file was verified" msgstr "" #: src/md5sum.c:760 #, c-format msgid "--tag does not support --text mode" msgstr "" #: src/md5sum.c:766 #, c-format msgid "the --tag option is meaningless when verifying checksums" msgstr "" #: src/md5sum.c:773 #, c-format msgid "" "the --binary and --text options are meaningless when verifying checksums" msgstr "" #: src/md5sum.c:831 #, c-format msgid "" "the --ignore-missing option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:781 #, c-format msgid "the --status option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:788 #, c-format msgid "the --warn option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:795 #, c-format msgid "the --quiet option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:802 #, c-format msgid "the --strict option is meaningful only when verifying checksums" msgstr "" #: src/mkdir.c:56 src/rmdir.c:164 #, c-format msgid "Usage: %s [OPTION]... DIRECTORY...\n" msgstr "" #: src/mkdir.c:57 msgid "Create the DIRECTORY(ies), if they do not already exist.\n" msgstr "" #: src/mkdir.c:65 msgid "" " -m, --mode=MODE set file mode (as in chmod), not a=rwx - umask\n" " -p, --parents no error if existing, make parent directories as needed\n" " -v, --verbose print a message for each created directory\n" msgstr "" #: src/mkdir.c:70 msgid "" " -Z set SELinux security context of each created " "directory\n" " to the default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the SELinux\n" " or SMACK security context to CTX\n" msgstr "" #: src/mkdir.c:127 src/mkdir.c:160 #, c-format msgid "failed to set default creation context for %s" msgstr "" #: src/mkdir.c:180 #, c-format msgid "failed to restore context for %s" msgstr "" #: src/mkdir.c:168 #, c-format msgid "created directory %s" msgstr "" #: src/mkdir.c:238 src/mkfifo.c:116 src/mknod.c:133 #, c-format msgid "" "warning: ignoring --context; it requires an SELinux/SMACK-enabled kernel" msgstr "" #: src/mkfifo.c:51 src/pathchk.c:89 #, c-format msgid "Usage: %s [OPTION]... NAME...\n" msgstr "" #: src/mkfifo.c:52 msgid "Create named pipes (FIFOs) with the given NAMEs.\n" msgstr "" #: src/mkfifo.c:58 src/mknod.c:60 msgid "" " -m, --mode=MODE set file permission bits to MODE, not a=rw - umask\n" msgstr "" #: src/mkfifo.c:63 src/mknod.c:65 msgid "" " -Z set the SELinux security context to default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the SELinux\n" " or SMACK security context to CTX\n" msgstr "" #: src/mkfifo.c:121 src/mknod.c:127 #, c-format msgid "invalid mode" msgstr "" #: src/mkfifo.c:126 src/mknod.c:132 #, c-format msgid "mode must specify only file permission bits" msgstr "" #: src/mkfifo.c:174 src/mknod.c:270 #, c-format msgid "cannot set permissions of %s" msgstr "" #: src/mknod.c:52 #, c-format msgid "Usage: %s [OPTION]... NAME TYPE [MAJOR MINOR]\n" msgstr "" #: src/mknod.c:54 msgid "Create the special file NAME of the given TYPE.\n" msgstr "" #: src/mknod.c:68 msgid "" "\n" "Both MAJOR and MINOR must be specified when TYPE is b, c, or u, and they\n" "must be omitted when TYPE is p. If MAJOR or MINOR begins with 0x or 0X,\n" "it is interpreted as hexadecimal; otherwise, if it begins with 0, as octal;\n" "otherwise, as decimal. TYPE may be:\n" msgstr "" #: src/mknod.c:75 msgid "" "\n" " b create a block (buffered) special file\n" " c, u create a character (unbuffered) special file\n" " p create a FIFO\n" msgstr "" #: src/mknod.c:150 msgid "Special files require major and minor device numbers." msgstr "" #: src/mknod.c:160 msgid "Fifos do not have major and minor device numbers." msgstr "" #: src/mknod.c:176 #, c-format msgid "block special files not supported" msgstr "" #: src/mknod.c:185 #, c-format msgid "character special files not supported" msgstr "" #: src/mknod.c:201 #, c-format msgid "invalid major device number %s" msgstr "" #: src/mknod.c:206 #, c-format msgid "invalid minor device number %s" msgstr "" #: src/mknod.c:211 #, c-format msgid "invalid device %s %s" msgstr "" #: src/mknod.c:225 #, c-format msgid "invalid device type %s" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/mktemp.c:37 msgid "Eric Blake" msgstr "" #: src/mktemp.c:68 #, c-format msgid "Usage: %s [OPTION]... [TEMPLATE]\n" msgstr "" #: src/mktemp.c:69 msgid "" "Create a temporary file or directory, safely, and print its name.\n" "TEMPLATE must contain at least 3 consecutive 'X's in last component.\n" "If TEMPLATE is not specified, use tmp.XXXXXXXXXX, and --tmpdir is implied.\n" msgstr "" #: src/mktemp.c:74 msgid "" "Files are created u+rw, and directories u+rwx, minus umask restrictions.\n" msgstr "" #: src/mktemp.c:78 msgid "" " -d, --directory create a directory, not a file\n" " -u, --dry-run do not create anything; merely print a name (unsafe)\n" " -q, --quiet suppress diagnostics about file/dir-creation failure\n" msgstr "" #: src/mktemp.c:81 msgid "" " --suffix=SUFF append SUFF to TEMPLATE; SUFF must not contain a " "slash.\n" " This option is implied if TEMPLATE does not end in " "X\n" msgstr "" #: src/mktemp.c:85 msgid "" " -p DIR, --tmpdir[=DIR] interpret TEMPLATE relative to DIR; if DIR is not\n" " specified, use $TMPDIR if set, else /tmp. With\n" " this option, TEMPLATE must not be an absolute name;\n" " unlike with -t, TEMPLATE may contain slashes, but\n" " mktemp creates only the final component\n" msgstr "" #: src/mktemp.c:92 msgid "" " -t interpret TEMPLATE as a single file name component,\n" " relative to a directory: $TMPDIR, if set; else the\n" " directory specified via -p; else /tmp [deprecated]\n" msgstr "" #: src/mktemp.c:229 #, c-format msgid "too many templates" msgstr "" #: src/mktemp.c:249 #, c-format msgid "with --suffix, template %s must end in X" msgstr "" #: src/mktemp.c:274 src/split.c:1130 #, c-format msgid "invalid suffix %s, contains directory separator" msgstr "" #: src/mktemp.c:279 #, c-format msgid "too few X's in template %s" msgstr "" #: src/mktemp.c:292 #, c-format msgid "invalid template, %s, contains directory separator" msgstr "" #: src/mktemp.c:306 #, c-format msgid "invalid template, %s; with --tmpdir, it may not be absolute" msgstr "" #: src/mktemp.c:326 #, c-format msgid "failed to create directory via template %s" msgstr "" #: src/mktemp.c:336 #, c-format msgid "failed to create file via template %s" msgstr "" #: src/mv.c:292 msgid "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n" msgstr "" #: src/mv.c:298 msgid "" " --backup[=CONTROL] make a backup of each existing destination " "file\n" " -b like --backup but does not accept an " "argument\n" " -f, --force do not prompt before overwriting\n" " -i, --interactive prompt before overwrite\n" " -n, --no-clobber do not overwrite an existing file\n" "If you specify more than one of -i, -f, -n, only the final one takes " "effect.\n" msgstr "" #: src/mv.c:307 msgid "" " --strip-trailing-slashes remove any trailing slashes from each " "SOURCE\n" " argument\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" msgstr "" #: src/mv.c:313 msgid "" " -t, --target-directory=DIRECTORY move all SOURCE arguments into " "DIRECTORY\n" " -T, --no-target-directory treat DEST as a normal file\n" " -u, --update move only when the SOURCE file is newer\n" " than the destination file or when the\n" " destination file is missing\n" " -v, --verbose explain what is being done\n" " -Z, --context set SELinux security context of destination\n" " file to default type\n" msgstr "" #: src/nice.c:72 #, c-format msgid "Usage: %s [OPTION] [COMMAND [ARG]...]\n" msgstr "" #: src/nice.c:73 #, c-format msgid "" "Run COMMAND with an adjusted niceness, which affects process scheduling.\n" "With no COMMAND, print the current niceness. Niceness values range from\n" "%d (most favorable to the process) to %d (least favorable to the process).\n" msgstr "" #: src/nice.c:82 msgid " -n, --adjustment=N add integer N to the niceness (default 10)\n" msgstr "" #: src/nice.c:172 #, c-format msgid "invalid adjustment %s" msgstr "" #: src/nice.c:181 #, c-format msgid "a command must be given with an adjustment" msgstr "" #: src/nice.c:188 src/nice.c:199 #, c-format msgid "cannot get niceness" msgstr "" #: src/nice.c:205 #, c-format msgid "cannot set niceness" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/nl.c:40 msgid "Scott Bartram" msgstr "" #: src/nl.c:179 msgid "Write each FILE to standard output, with line numbers added.\n" msgstr "" #: src/nl.c:186 msgid "" " -b, --body-numbering=STYLE use STYLE for numbering body lines\n" " -d, --section-delimiter=CC use CC for separating logical pages\n" " -f, --footer-numbering=STYLE use STYLE for numbering footer lines\n" msgstr "" #: src/nl.c:191 msgid "" " -h, --header-numbering=STYLE use STYLE for numbering header lines\n" " -i, --line-increment=NUMBER line number increment at each line\n" " -l, --join-blank-lines=NUMBER group of NUMBER empty lines counted as " "one\n" " -n, --number-format=FORMAT insert line numbers according to FORMAT\n" " -p, --no-renumber do not reset line numbers at logical " "pages\n" " -s, --number-separator=STRING add STRING after (possible) line number\n" msgstr "" #: src/nl.c:199 msgid "" " -v, --starting-line-number=NUMBER first line number on each logical page\n" " -w, --number-width=NUMBER use NUMBER columns for line numbers\n" msgstr "" #: src/nl.c:205 msgid "" "\n" "By default, selects -v1 -i1 -l1 -sTAB -w6 -nrn -hn -bt -fn. CC are\n" "two delimiter characters for separating logical pages, a missing\n" "second character implies :. Type \\\\ for \\. STYLE is one of:\n" msgstr "" #: src/nl.c:211 msgid "" "\n" " a number all lines\n" " t number only nonempty lines\n" " n number no lines\n" " pBRE number only lines that contain a match for the basic regular\n" " expression, BRE\n" "\n" "FORMAT is one of:\n" "\n" " ln left justified, no leading zeros\n" " rn right justified, no leading zeros\n" " rz right justified, leading zeros\n" "\n" msgstr "" #: src/nl.c:278 #, c-format msgid "line number overflow" msgstr "" #: src/nl.c:478 #, c-format msgid "invalid header numbering style: %s" msgstr "" #: src/nl.c:486 #, c-format msgid "invalid body numbering style: %s" msgstr "" #: src/nl.c:494 #, c-format msgid "invalid footer numbering style: %s" msgstr "" #: src/nl.c:501 msgid "invalid starting line number" msgstr "" #: src/nl.c:506 msgid "invalid line number increment" msgstr "" #: src/nl.c:513 msgid "invalid line number of blank lines" msgstr "" #: src/nl.c:520 msgid "invalid line number field width" msgstr "" #: src/nl.c:557 #, c-format msgid "invalid line numbering format: %s" msgstr "" #: src/nohup.c:53 #, c-format msgid "" "Usage: %s COMMAND [ARG]...\n" " or: %s OPTION\n" msgstr "" #: src/nohup.c:59 msgid "" "Run COMMAND, ignoring hangup signals.\n" "\n" msgstr "" #: src/nohup.c:64 #, c-format msgid "" "\n" "If standard input is a terminal, redirect it from an unreadable file.\n" "If standard output is a terminal, append output to 'nohup.out' if possible,\n" "'$HOME/nohup.out' otherwise.\n" "If standard error is a terminal, redirect it to standard output.\n" "To save output to FILE, use '%s COMMAND > FILE'.\n" msgstr "" #: src/nohup.c:127 #, c-format msgid "failed to render standard input unusable" msgstr "" #: src/nohup.c:131 #, c-format msgid "ignoring input" msgstr "" #: src/nohup.c:175 #, c-format msgid "ignoring input and appending output to %s" msgstr "" #: src/nohup.c:176 #, c-format msgid "appending output to %s" msgstr "" #: src/nohup.c:193 #, c-format msgid "failed to set the copy of stderr to close on exec" msgstr "" #: src/nohup.c:198 #, c-format msgid "ignoring input and redirecting stderr to stdout" msgstr "" #: src/nohup.c:199 #, c-format msgid "redirecting stderr to stdout" msgstr "" #: src/nohup.c:203 #, c-format msgid "failed to redirect standard error" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/nproc.c:33 msgid "Giuseppe Scrivano" msgstr "" #: src/nproc.c:57 src/pwd.c:56 src/tty.c:64 src/uname.c:120 src/whoami.c:44 #, c-format msgid "Usage: %s [OPTION]...\n" msgstr "" #: src/nproc.c:58 msgid "" "Print the number of processing units available to the current process,\n" "which may be less than the number of online processors\n" "\n" msgstr "" #: src/nproc.c:63 msgid "" " --all print the number of installed processors\n" " --ignore=N if possible, exclude N processing units\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/numfmt.c:35 msgid "Assaf Gordon" msgstr "" #: src/numfmt.c:693 #, c-format msgid "value too large to be converted: %s" msgstr "" #: src/numfmt.c:697 #, c-format msgid "invalid number: %s" msgstr "" #: src/numfmt.c:701 #, c-format msgid "rejecting suffix in input: %s (consider using --from)" msgstr "" #: src/numfmt.c:705 #, c-format msgid "invalid suffix in input: %s" msgstr "" #: src/numfmt.c:709 #, c-format msgid "missing 'i' suffix in input: %s (e.g Ki/Mi/Gi)" msgstr "" #: src/numfmt.c:723 #, c-format msgid "failed to prepare value '%Lf' for printing" msgstr "" #: src/numfmt.c:857 #, c-format msgid "invalid unit size: %s" msgstr "" #: src/numfmt.c:813 #, c-format msgid "Usage: %s [OPTION]... [NUMBER]...\n" msgstr "" #: src/numfmt.c:816 msgid "" "Reformat NUMBER(s), or the numbers from standard input if none are " "specified.\n" msgstr "" #: src/numfmt.c:820 msgid " --debug print warnings about invalid input\n" msgstr "" #: src/numfmt.c:823 msgid "" " -d, --delimiter=X use X instead of whitespace for field delimiter\n" msgstr "" #: src/numfmt.c:896 msgid "" " --field=FIELDS replace the numbers in these input fields " "(default=1)\n" " see FIELDS below\n" msgstr "" #: src/numfmt.c:829 msgid "" " --format=FORMAT use printf style floating-point FORMAT;\n" " see FORMAT below for details\n" msgstr "" #: src/numfmt.c:833 msgid "" " --from=UNIT auto-scale input numbers to UNITs; default is " "'none';\n" " see UNIT below\n" msgstr "" #: src/numfmt.c:837 msgid "" " --from-unit=N specify the input unit size (instead of the default " "1)\n" msgstr "" #: src/numfmt.c:840 msgid "" " --grouping use locale-defined grouping of digits, e.g. " "1,000,000\n" " (which means it has no effect in the C/POSIX " "locale)\n" msgstr "" #: src/numfmt.c:844 msgid "" " --header[=N] print (without converting) the first N header lines;\n" " N defaults to 1 if not specified\n" msgstr "" #: src/numfmt.c:848 msgid "" " --invalid=MODE failure mode for invalid numbers: MODE can be:\n" " abort (default), fail, warn, ignore\n" msgstr "" #: src/numfmt.c:852 msgid "" " --padding=N pad the output to N characters; positive N will\n" " right-align; negative N will left-align;\n" " padding is ignored if the output is wider than N;\n" " the default is to automatically pad if a " "whitespace\n" " is found\n" msgstr "" #: src/numfmt.c:859 msgid "" " --round=METHOD use METHOD for rounding when scaling; METHOD can be:\n" " up, down, from-zero (default), towards-zero, " "nearest\n" msgstr "" #: src/numfmt.c:863 msgid "" " --suffix=SUFFIX add SUFFIX to output numbers, and accept optional\n" " SUFFIX in input numbers\n" msgstr "" #: src/numfmt.c:867 msgid "" " --to=UNIT auto-scale output numbers to UNITs; see UNIT below\n" msgstr "" #: src/numfmt.c:870 msgid "" " --to-unit=N the output unit size (instead of the default 1)\n" msgstr "" #: src/numfmt.c:877 msgid "" "\n" "UNIT options:\n" msgstr "" #: src/numfmt.c:880 msgid "" " none no auto-scaling is done; suffixes will trigger an error\n" msgstr "" #: src/numfmt.c:883 msgid "" " auto accept optional single/two letter suffix:\n" " 1K = 1000,\n" " 1Ki = 1024,\n" " 1M = 1000000,\n" " 1Mi = 1048576,\n" msgstr "" #: src/numfmt.c:889 msgid "" " si accept optional single letter suffix:\n" " 1K = 1000,\n" " 1M = 1000000,\n" " ...\n" msgstr "" #: src/numfmt.c:894 msgid "" " iec accept optional single letter suffix:\n" " 1K = 1024,\n" " 1M = 1048576,\n" " ...\n" msgstr "" #: src/numfmt.c:899 msgid "" " iec-i accept optional two-letter suffix:\n" " 1Ki = 1024,\n" " 1Mi = 1048576,\n" " ...\n" msgstr "" #: src/numfmt.c:978 msgid "" "\n" "FIELDS supports cut(1) style field ranges:\n" " N N'th field, counted from 1\n" " N- from N'th field, to end of line\n" " N-M from N'th to M'th field (inclusive)\n" " -M from first to M'th field (inclusive)\n" " - all fields\n" "Multiple fields/ranges can be separated with commas\n" msgstr "" #: src/numfmt.c:988 #, c-format msgid "" "\n" "FORMAT must be suitable for printing one floating-point argument '%f'.\n" "Optional quote (%'f) will enable --grouping (if supported by current " "locale).\n" "Optional width value (%10f) will pad output. Optional zero (%010f) width\n" "will zero pad the number. Optional negative values (%-10f) will left align.\n" "Optional precision (%.1f) will override the input determined precision.\n" msgstr "" #: src/numfmt.c:912 #, c-format msgid "" "\n" "Exit status is 0 if all input numbers were successfully converted.\n" "By default, %s will stop at the first conversion error with exit status 2.\n" "With --invalid='fail' a warning is printed for each conversion error\n" "and the exit status is 2. With --invalid='warn' each conversion error is\n" "diagnosed, but the exit status is 0. With --invalid='ignore' conversion\n" "errors are not diagnosed and the exit status is 0.\n" msgstr "" #: src/numfmt.c:1005 #, c-format msgid "" "\n" "Examples:\n" " $ %s --to=si 1000\n" " -> \"1.0K\"\n" " $ %s --to=iec 2048\n" " -> \"2.0K\"\n" " $ %s --to=iec-i 4096\n" " -> \"4.0Ki\"\n" " $ echo 1K | %s --from=si\n" " -> \"1000\"\n" " $ echo 1K | %s --from=iec\n" " -> \"1024\"\n" " $ df -B1 | %s --header --field 2-4 --to=si\n" " $ ls -l | %s --header --field 5 --to=iec\n" " $ ls -lh | %s --header --field 5 --from=iec --padding=10\n" " $ ls -lh | %s --header --field 5 --from=iec --format %%10f\n" msgstr "" #: src/numfmt.c:974 src/seq.c:212 #, c-format msgid "format %s has no %% directive" msgstr "" #: src/numfmt.c:990 #, c-format msgid "invalid format %s (width overflow)" msgstr "" #: src/numfmt.c:1090 #, c-format msgid "--format padding overriding --padding" msgstr "" #: src/numfmt.c:1007 src/seq.c:229 #, c-format msgid "format %s ends in %%" msgstr "" #: src/numfmt.c:1125 #, c-format msgid "invalid precision in format %s" msgstr "" #: src/numfmt.c:1131 #, c-format msgid "invalid format %s, directive must be %%[0]['][-][N][.][N]f" msgstr "" #: src/numfmt.c:1018 src/seq.c:236 #, c-format msgid "format %s has too many %% directives" msgstr "" #: src/numfmt.c:1182 #, c-format msgid "invalid suffix in input %s: %s" msgstr "" #: src/numfmt.c:1211 #, c-format msgid "" "value/precision too large to be printed: '%Lg/%' (consider using --" "to)" msgstr "" #: src/numfmt.c:1092 #, c-format msgid "value too large to be printed: '%Lg' (consider using --to)" msgstr "" #: src/numfmt.c:1100 #, c-format msgid "value too large to be printed: '%Lg' (cannot handle values > 999Y)" msgstr "" #: src/numfmt.c:1310 #, c-format msgid "large input value %s: possible precision loss" msgstr "" #: src/numfmt.c:1499 #, c-format msgid "invalid padding value %s" msgstr "" #: src/numfmt.c:1512 #, c-format msgid "multiple field specifications" msgstr "" #: src/numfmt.c:1546 #, c-format msgid "invalid header value %s" msgstr "" #: src/numfmt.c:1456 #, c-format msgid "--grouping cannot be combined with --format" msgstr "" #: src/numfmt.c:1576 #, c-format msgid "failed to set locale" msgstr "" #: src/numfmt.c:1463 #, c-format msgid "no conversion option specified" msgstr "" #: src/numfmt.c:1471 #, c-format msgid "grouping cannot be combined with --to" msgstr "" #: src/numfmt.c:1473 #, c-format msgid "grouping has no effect in this locale" msgstr "" #: src/numfmt.c:1486 #, c-format msgid "--header ignored with command-line input" msgstr "" #: src/numfmt.c:1511 #, c-format msgid "error reading input" msgstr "" #: src/numfmt.c:1520 #, c-format msgid "failed to convert some of the input numbers" msgstr "" #: src/od.c:294 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" " or: %s [-abcdfilosx]... [FILE] [[+]OFFSET[.][b]]\n" " or: %s --traditional [OPTION]... [FILE] [[+]OFFSET[.][b] " "[+][LABEL][.][b]]\n" msgstr "" #: src/od.c:327 msgid "" "\n" "Write an unambiguous representation, octal bytes by default,\n" "of FILE to standard output. With more than one FILE argument,\n" "concatenate them in the listed order to form the input.\n" msgstr "" #: src/od.c:335 msgid "" "\n" "If first and second call formats both apply, the second format is assumed\n" "if the last operand begins with + or (if there are 2 operands) a digit.\n" "An OFFSET operand means -j OFFSET. LABEL is the pseudo-address\n" "at first byte printed, incremented when dump is progressing.\n" "For OFFSET and LABEL, a 0x or 0X prefix indicates hexadecimal;\n" "suffixes may be . for octal and b for multiply by 512.\n" msgstr "" #: src/od.c:347 msgid "" " -A, --address-radix=RADIX output format for file offsets; RADIX is one\n" " of [doxn], for Decimal, Octal, Hex or None\n" " --endian={big|little} swap input bytes according the specified " "order\n" " -j, --skip-bytes=BYTES skip BYTES input bytes first\n" msgstr "" #: src/od.c:353 msgid "" " -N, --read-bytes=BYTES limit dump to BYTES input bytes\n" " -S BYTES, --strings[=BYTES] output strings of at least BYTES graphic " "chars;\n" " 3 is implied when BYTES is not specified\n" " -t, --format=TYPE select output format or formats\n" " -v, --output-duplicates do not use * to mark line suppression\n" " -w[BYTES], --width[=BYTES] output BYTES bytes per output line;\n" " 32 is implied when BYTES is not specified\n" " --traditional accept arguments in third form above\n" msgstr "" #: src/od.c:366 msgid "" "\n" "\n" "Traditional format specifications may be intermixed; they accumulate:\n" " -a same as -t a, select named characters, ignoring high-order bit\n" " -b same as -t o1, select octal bytes\n" " -c same as -t c, select printable characters or backslash escapes\n" " -d same as -t u2, select unsigned decimal 2-byte units\n" msgstr "" #: src/od.c:345 msgid "" " -f same as -t fF, select floats\n" " -i same as -t dI, select decimal ints\n" " -l same as -t dL, select decimal longs\n" " -o same as -t o2, select octal 2-byte units\n" " -s same as -t d2, select decimal 2-byte units\n" " -x same as -t x2, select hexadecimal 2-byte units\n" msgstr "" #: src/od.c:383 msgid "" "\n" "\n" "TYPE is made up of one or more of these specifications:\n" " a named character, ignoring high-order bit\n" " c printable character or backslash escape\n" msgstr "" #: src/od.c:360 msgid "" " d[SIZE] signed decimal, SIZE bytes per integer\n" " f[SIZE] floating point, SIZE bytes per integer\n" " o[SIZE] octal, SIZE bytes per integer\n" " u[SIZE] unsigned decimal, SIZE bytes per integer\n" " x[SIZE] hexadecimal, SIZE bytes per integer\n" msgstr "" #: src/od.c:367 msgid "" "\n" "SIZE is a number. For TYPE in [doux], SIZE may also be C for\n" "sizeof(char), S for sizeof(short), I for sizeof(int) or L for\n" "sizeof(long). If TYPE is f, SIZE may also be F for sizeof(float), D\n" "for sizeof(double) or L for sizeof(long double).\n" msgstr "" #: src/od.c:374 msgid "" "\n" "Adding a z suffix to any type displays printable characters at the end of\n" "each output line.\n" msgstr "" #: src/od.c:379 msgid "" "\n" "\n" "BYTES is hex with 0x or 0X prefix, and may have a multiplier suffix:\n" " b 512\n" " KB 1000\n" " K 1024\n" " MB 1000*1000\n" " M 1024*1024\n" "and so on for G, T, P, E, Z, Y.\n" msgstr "" #: src/od.c:639 src/od.c:759 #, c-format msgid "invalid type string %s" msgstr "" #: src/od.c:649 #, c-format msgid "" "invalid type string %s;\n" "this system doesn't provide a %lu-byte integral type" msgstr "" #: src/od.c:770 #, c-format msgid "" "invalid type string %s;\n" "this system doesn't provide a %lu-byte floating point type" msgstr "" #: src/od.c:828 #, c-format msgid "invalid character '%c' in type string %s" msgstr "" #: src/od.c:1053 #, c-format msgid "cannot skip past end of combined input" msgstr "" #: src/od.c:1609 #, c-format msgid "" "invalid output address radix '%c'; it must be one character from [doxn]" msgstr "" #: src/od.c:1735 #, c-format msgid "no type may be specified when dumping strings" msgstr "" #: src/od.c:1810 msgid "compatibility mode supports at most one file" msgstr "" #: src/od.c:1831 #, c-format msgid "skip-bytes + read-bytes is too large" msgstr "" #: src/od.c:1874 #, c-format msgid "warning: invalid width %lu; using %d instead" msgstr "" #: src/operand2sig.c:69 #, c-format msgid "%s: invalid signal" msgstr "" #: src/paste.c:220 #, c-format msgid "standard input is closed" msgstr "" #: src/paste.c:441 msgid "" "Write lines consisting of the sequentially corresponding lines from\n" "each FILE, separated by TABs, to standard output.\n" msgstr "" #: src/paste.c:447 msgid "" " -d, --delimiters=LIST reuse characters from LIST instead of TABs\n" " -s, --serial paste one file at a time instead of in parallel\n" msgstr "" #: src/paste.c:508 #, c-format msgid "delimiter list ends with an unescaped backslash: %s" msgstr "" #: src/pathchk.c:90 msgid "" "Diagnose invalid or unportable file names.\n" "\n" " -p check for most POSIX systems\n" " -P check for empty names and leading \"-\"\n" " --portability check for all POSIX systems (equivalent to -p -P)\n" msgstr "" #: src/pathchk.c:170 #, c-format msgid "leading '-' in a component of file name %s" msgstr "" #: src/pathchk.c:196 #, c-format msgid "nonportable character %s in file name %s" msgstr "" #: src/pathchk.c:272 #, c-format msgid "empty file name" msgstr "" #: src/pathchk.c:314 #, c-format msgid "%s: unable to determine maximum file name length" msgstr "" #: src/pathchk.c:325 #, c-format msgid "limit %lu exceeded by length %lu of file name %s" msgstr "" #: src/pathchk.c:411 #, c-format msgid "limit %lu exceeded by length %lu of file name component %s" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/pinky.c:36 src/uptime.c:45 src/users.c:35 src/who.c:48 msgid "Joseph Arceneaux" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/pinky.c:38 src/uptime.c:47 msgid "Kaveh Ghazi" msgstr "" #. TRANSLATORS: Real name is unknown; at most 19 characters. #: src/pinky.c:242 msgid " ???" msgstr "" #. TRANSLATORS: Idle time is unknown; at most 5 characters. #: src/pinky.c:266 msgid "?????" msgstr "" #: src/pinky.c:314 #, c-format msgid "Login name: " msgstr "" #: src/pinky.c:317 #, c-format msgid "In real life: " msgstr "" #. TRANSLATORS: Real name is unknown; no hard limit. #: src/pinky.c:321 msgid "???\n" msgstr "" #: src/pinky.c:341 #, c-format msgid "Directory: " msgstr "" #: src/pinky.c:343 #, c-format msgid "Shell: " msgstr "" #: src/pinky.c:362 #, c-format msgid "Project: " msgstr "" #: src/pinky.c:386 #, c-format msgid "Plan:\n" msgstr "" #: src/pinky.c:405 msgid "Login" msgstr "" #: src/pinky.c:407 msgid "Name" msgstr "" #: src/pinky.c:408 msgid " TTY" msgstr "" #: src/pinky.c:410 msgid "Idle" msgstr "" #: src/pinky.c:411 msgid "When" msgstr "" #: src/pinky.c:414 msgid "Where" msgstr "" #: src/pinky.c:493 #, c-format msgid "Usage: %s [OPTION]... [USER]...\n" msgstr "" #: src/pinky.c:494 msgid "" "\n" " -l produce long format output for the specified USERs\n" " -b omit the user's home directory and shell in long format\n" " -h omit the user's project file in long format\n" " -p omit the user's plan file in long format\n" " -s do short format output, this is the default\n" msgstr "" #: src/pinky.c:502 msgid "" " -f omit the line of column headings in short format\n" " -w omit the user's full name in short format\n" " -i omit the user's full name and remote host in short format\n" " -q omit the user's full name, remote host and idle time\n" " in short format\n" msgstr "" #: src/pinky.c:511 #, c-format msgid "" "\n" "A lightweight 'finger' program; print user information.\n" "The utmp file will be %s.\n" msgstr "" #: src/pinky.c:595 #, c-format msgid "no username specified; at least one must be specified when using -l" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/pr.c:330 msgid "Pete TerMaat" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/pr.c:331 msgid "Roland Huebner" msgstr "" #: src/pr.c:908 #, c-format msgid "'--pages=FIRST_PAGE[:LAST_PAGE]' missing argument" msgstr "" #: src/pr.c:910 #, c-format msgid "invalid page range %s" msgstr "" #: src/pr.c:966 msgid "'-l PAGE_LENGTH' invalid number of lines" msgstr "" #: src/pr.c:981 msgid "'-N NUMBER' invalid starting line number" msgstr "" #: src/pr.c:985 msgid "'-o MARGIN' invalid line offset" msgstr "" #: src/pr.c:1022 msgid "'-w PAGE_WIDTH' invalid number of characters" msgstr "" #: src/pr.c:1031 msgid "'-W PAGE_WIDTH' invalid number of characters" msgstr "" #: src/pr.c:1096 #, c-format msgid "cannot specify number of columns when printing in parallel" msgstr "" #: src/pr.c:1100 #, c-format msgid "cannot specify both printing across and printing in parallel" msgstr "" #: src/pr.c:1196 #, c-format msgid "'-%c' extra characters or invalid number in the argument: %s" msgstr "" #: src/pr.c:1293 #, c-format msgid "page width too narrow" msgstr "" #: src/pr.c:2353 #, c-format msgid "starting page number % exceeds page count %" msgstr "" #: src/pr.c:2380 #, c-format msgid "page number overflow" msgstr "" #: src/pr.c:2385 #, c-format msgid "Page %" msgstr "" #: src/pr.c:2757 msgid "Paginate or columnate FILE(s) for printing.\n" msgstr "" #: src/pr.c:2763 msgid "" " +FIRST_PAGE[:LAST_PAGE], --pages=FIRST_PAGE[:LAST_PAGE]\n" " begin [stop] printing with page FIRST_[LAST_]PAGE\n" " -COLUMN, --columns=COLUMN\n" " output COLUMN columns and print columns down,\n" " unless -a is used. Balance number of lines in the\n" " columns on each page\n" msgstr "" #: src/pr.c:2771 msgid "" " -a, --across print columns across rather than down, used together\n" " with -COLUMN\n" " -c, --show-control-chars\n" " use hat notation (^G) and octal backslash notation\n" " -d, --double-space\n" " double space the output\n" msgstr "" #: src/pr.c:2779 msgid "" " -D, --date-format=FORMAT\n" " use FORMAT for the header date\n" " -e[CHAR[WIDTH]], --expand-tabs[=CHAR[WIDTH]]\n" " expand input CHARs (TABs) to tab WIDTH (8)\n" " -F, -f, --form-feed\n" " use form feeds instead of newlines to separate pages\n" " (by a 3-line page header with -F or a 5-line header\n" " and trailer without -F)\n" msgstr "" #: src/pr.c:2789 msgid "" " -h, --header=HEADER\n" " use a centered HEADER instead of filename in page " "header,\n" " -h \"\" prints a blank line, don't use -h\"\"\n" " -i[CHAR[WIDTH]], --output-tabs[=CHAR[WIDTH]]\n" " replace spaces with CHARs (TABs) to tab WIDTH (8)\n" " -J, --join-lines merge full lines, turns off -W line truncation, no " "column\n" " alignment, --sep-string[=STRING] sets separators\n" msgstr "" #: src/pr.c:2769 msgid "" " -l, --length=PAGE_LENGTH\n" " set the page length to PAGE_LENGTH (66) lines\n" " (default number of lines of text 56, and with -F 63).\n" " implies -t if PAGE_LENGTH <= 10\n" msgstr "" #: src/pr.c:2775 msgid "" " -m, --merge print all files in parallel, one in each column,\n" " truncate lines, but join lines of full length with -J\n" msgstr "" #: src/pr.c:2805 msgid "" " -n[SEP[DIGITS]], --number-lines[=SEP[DIGITS]]\n" " number lines, use DIGITS (5) digits, then SEP (TAB),\n" " default counting starts with 1st line of input file\n" " -N, --first-line-number=NUMBER\n" " start counting with NUMBER at 1st line of first\n" " page printed (see +FIRST_PAGE)\n" msgstr "" #: src/pr.c:2813 msgid "" " -o, --indent=MARGIN\n" " offset each line with MARGIN (zero) spaces, do not\n" " affect -w or -W, MARGIN will be added to PAGE_WIDTH\n" " -r, --no-file-warnings\n" " omit warning when a file cannot be opened\n" msgstr "" #: src/pr.c:2794 msgid "" " -s[CHAR], --separator[=CHAR]\n" " separate columns by a single character, default for " "CHAR\n" " is the character without -w and 'no char' with -" "w.\n" " -s[CHAR] turns off line truncation of all 3 column\n" " options (-COLUMN|-a -COLUMN|-m) except -w is set\n" msgstr "" #: src/pr.c:2802 msgid "" " -S[STRING], --sep-string[=STRING]\n" " separate columns by STRING,\n" " without -S: Default separator with -J and \n" " otherwise (same as -S\" \"), no effect on column " "options\n" msgstr "" #: src/pr.c:2808 msgid "" " -t, --omit-header omit page headers and trailers;\n" " implied if PAGE_LENGTH <= 10\n" msgstr "" #: src/pr.c:2834 msgid "" " -T, --omit-pagination\n" " omit page headers and trailers, eliminate any " "pagination\n" " by form feeds set in input files\n" " -v, --show-nonprinting\n" " use octal backslash notation\n" " -w, --width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters for\n" " multiple text-column output only, -s[char] turns off " "(72)\n" msgstr "" #: src/pr.c:2844 msgid "" " -W, --page-width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters always,\n" " truncate lines, except -J option is set, no " "interference\n" " with -S or -s\n" msgstr "" #: src/printenv.c:62 #, c-format msgid "" "Usage: %s [OPTION]... [VARIABLE]...\n" "Print the values of the specified environment VARIABLE(s).\n" "If no VARIABLE is specified, print name and value pairs for them all.\n" "\n" msgstr "" #: src/printenv.c:69 msgid " -0, --null end each output line with NUL, not newline\n" msgstr "" #: src/printf.c:79 #, c-format msgid "" "warning: %s: character(s) following character constant have been ignored" msgstr "" #: src/printf.c:88 #, c-format msgid "" "Usage: %s FORMAT [ARGUMENT]...\n" " or: %s OPTION\n" msgstr "" #: src/printf.c:93 msgid "" "Print ARGUMENT(s) according to FORMAT, or execute according to OPTION:\n" "\n" msgstr "" #: src/printf.c:99 msgid "" "\n" "FORMAT controls the output as in C printf. Interpreted sequences are:\n" "\n" " \\\" double quote\n" msgstr "" #: src/printf.c:117 msgid "" " \\NNN byte with octal value NNN (1 to 3 digits)\n" " \\xHH byte with hexadecimal value HH (1 to 2 digits)\n" " \\uHHHH Unicode (ISO/IEC 10646) character with hex value HHHH (4 digits)\n" " \\UHHHHHHHH Unicode character with hex value HHHHHHHH (8 digits)\n" msgstr "" #: src/printf.c:127 msgid "" " %% a single %\n" " %b ARGUMENT as a string with '\\' escapes interpreted,\n" " except that octal escapes are of the form \\0 or \\0NNN\n" " %q ARGUMENT is printed in a format that can be reused as shell " "input,\n" " escaping non-printable characters with the proposed POSIX $'' " "syntax.\n" "\n" "and all C format specifications ending with one of diouxXfeEgGcs, with\n" "ARGUMENTs converted to proper type first. Variable widths are handled.\n" msgstr "" #: src/printf.c:148 #, c-format msgid "%s: expected a numeric value" msgstr "" #: src/printf.c:150 #, c-format msgid "%s: value not completely converted" msgstr "" #: src/printf.c:247 src/printf.c:274 #, c-format msgid "missing hexadecimal number in escape" msgstr "" #: src/printf.c:286 #, c-format msgid "invalid universal character name \\%c%0*x" msgstr "" #: src/printf.c:547 #, c-format msgid "invalid field width: %s" msgstr "" #: src/printf.c:582 #, c-format msgid "invalid precision: %s" msgstr "" #: src/printf.c:609 #, c-format msgid "%.*s: invalid conversion specification" msgstr "" #: src/printf.c:692 #, c-format msgid "warning: ignoring excess arguments, starting with %s" msgstr "" #. TRANSLATORS: Please translate "F. Pinard" to "François Pinard" #. if "ç" (c-with-cedilla) is available in the translation's character #. set and encoding. #. This is a proper name. See the gettext manual, section Names. #: src/ptx.c:42 msgid "F. Pinard" msgstr "" #: src/ptx.c:419 #, c-format msgid "%s (for regexp %s)" msgstr "" #: src/ptx.c:1817 #, c-format msgid "" "Usage: %s [OPTION]... [INPUT]... (without -G)\n" " or: %s -G [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" #: src/ptx.c:1821 msgid "" "Output a permuted index, including context, of the words in the input " "files.\n" msgstr "" #: src/ptx.c:1830 msgid "" " -A, --auto-reference output automatically generated references\n" " -G, --traditional behave more like System V 'ptx'\n" msgstr "" #: src/ptx.c:1834 msgid "" " -F, --flag-truncation=STRING use STRING for flagging line truncations.\n" " The default is '/'\n" msgstr "" #: src/ptx.c:1832 msgid "" " -M, --macro-name=STRING macro name to use instead of 'xx'\n" " -O, --format=roff generate output as roff directives\n" " -R, --right-side-refs put references at right, not counted in -w\n" " -S, --sentence-regexp=REGEXP for end of lines or end of sentences\n" " -T, --format=tex generate output as TeX directives\n" msgstr "" #: src/ptx.c:1839 msgid "" " -W, --word-regexp=REGEXP use REGEXP to match each keyword\n" " -b, --break-file=FILE word break characters in this FILE\n" " -f, --ignore-case fold lower case to upper case for sorting\n" " -g, --gap-size=NUMBER gap size in columns between output fields\n" " -i, --ignore-file=FILE read ignore word list from FILE\n" " -o, --only-file=FILE read only word list from this FILE\n" msgstr "" #: src/ptx.c:1847 msgid "" " -r, --references first field of each line is a reference\n" " -t, --typeset-mode - not implemented -\n" " -w, --width=NUMBER output width in columns, reference " "excluded\n" msgstr "" #: src/ptx.c:1948 #, c-format msgid "invalid gap width: %s" msgstr "" #: src/ls.c:1750 src/ptx.c:1975 #, c-format msgid "invalid line width: %s" msgstr "" #: src/pwd.c:57 msgid "" "Print the full filename of the current working directory.\n" "\n" msgstr "" #: src/pwd.c:61 msgid "" " -L, --logical use PWD from environment, even if it contains symlinks\n" " -P, --physical avoid all symlinks\n" msgstr "" #: src/pwd.c:67 msgid "" "\n" "If no option is specified, -P is assumed.\n" msgstr "" #: src/pwd.c:166 #, c-format msgid "failed to chdir to %s" msgstr "" #: src/pwd.c:170 src/pwd.c:277 src/split.c:373 #, c-format msgid "failed to stat %s" msgstr "" #: src/pwd.c:235 #, c-format msgid "couldn't find directory entry in %s with matching i-node" msgstr "" #: src/pwd.c:362 #, c-format msgid "ignoring non-option arguments" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/readlink.c:32 msgid "Dmitry V. Levin" msgstr "" #: src/readlink.c:62 src/realpath.c:71 src/rm.c:135 src/shred.c:147 #: src/stat.c:1349 src/touch.c:212 #, c-format msgid "Usage: %s [OPTION]... FILE...\n" msgstr "" #: src/readlink.c:63 msgid "" "Print value of a symbolic link or canonical file name\n" "\n" msgstr "" #: src/readlink.c:65 msgid "" " -f, --canonicalize canonicalize by following every symlink in\n" " every component of the given name " "recursively;\n" " all but the last component must exist\n" " -e, --canonicalize-existing canonicalize by following every symlink in\n" " every component of the given name " "recursively,\n" " all components must exist\n" msgstr "" #: src/readlink.c:75 msgid "" " -m, --canonicalize-missing canonicalize by following every symlink in\n" " every component of the given name " "recursively,\n" " without requirements on components " "existence\n" " -n, --no-newline do not output the trailing delimiter\n" " -q, --quiet,\n" " -s, --silent suppress most error messages\n" " -v, --verbose report error messages\n" " -z, --zero end each output line with NUL, not newline\n" msgstr "" #: src/readlink.c:152 #, c-format msgid "ignoring --no-newline with multiple arguments" msgstr "" #: src/realpath.c:72 msgid "" "Print the resolved absolute file name;\n" "all but the last component must exist\n" "\n" msgstr "" #: src/realpath.c:76 msgid "" " -e, --canonicalize-existing all components of the path must exist\n" " -m, --canonicalize-missing no path components need exist or be a " "directory\n" " -L, --logical resolve '..' components before symlinks\n" " -P, --physical resolve symlinks as encountered (default)\n" " -q, --quiet suppress most error messages\n" " --relative-to=FILE print the resolved path relative to FILE\n" " --relative-base=FILE print absolute paths unless paths below FILE\n" " -s, --strip, --no-symlinks don't expand symlinks\n" " -z, --zero end each output line with NUL, not newline\n" "\n" msgstr "" #: src/relpath.c:130 msgid "generating relative path" msgstr "" #: src/remove.c:273 #, c-format msgid "%s: descend into write-protected directory %s? " msgstr "" #: src/remove.c:274 #, c-format msgid "%s: descend into directory %s? " msgstr "" #. TRANSLATORS: You may find it more convenient to #. translate "%s: remove %s (write-protected) %s? " #. instead. It should avoid grammatical problems #. with the output of file_type. #: src/remove.c:290 #, c-format msgid "%s: remove write-protected %s %s? " msgstr "" #: src/remove.c:291 #, c-format msgid "%s: remove %s %s? " msgstr "" #: src/remove.c:374 #, c-format msgid "removed directory %s\n" msgstr "" #: src/remove.c:446 #, c-format msgid "refusing to remove %s or %s directory: skipping %s" msgstr "" #: src/remove.c:500 #, c-format msgid "skipping %s, since it's on a different device" msgstr "" #: src/remove.c:520 #, c-format msgid "traversal failed: %s" msgstr "" #: src/remove.c:526 #, c-format msgid "" "unexpected failure: fts_info=%d: %s\n" "please report to %s" msgstr "" #: src/rm.c:119 #, c-format msgid "Try '%s ./%s' to remove the file %s.\n" msgstr "" #: src/rm.c:136 msgid "" "Remove (unlink) the FILE(s).\n" "\n" " -f, --force ignore nonexistent files and arguments, never " "prompt\n" " -i prompt before every removal\n" msgstr "" #: src/rm.c:140 msgid "" " -I prompt once before removing more than three files, " "or\n" " when removing recursively; less intrusive than -" "i,\n" " while still giving protection against most " "mistakes\n" " --interactive[=WHEN] prompt according to WHEN: never, once (-I), or\n" " always (-i); without WHEN, prompt always\n" msgstr "" #: src/rm.c:149 msgid "" " --one-file-system when removing a hierarchy recursively, skip any\n" " directory that is on a file system different from\n" " that of the corresponding command line argument\n" msgstr "" #: src/rm.c:154 msgid "" " --no-preserve-root do not treat '/' specially\n" " --preserve-root do not remove '/' (default)\n" " -r, -R, --recursive remove directories and their contents recursively\n" " -d, --dir remove empty directories\n" " -v, --verbose explain what is being done\n" msgstr "" #: src/rm.c:163 msgid "" "\n" "By default, rm does not remove directories. Use the --recursive (-r or -R)\n" "option to remove each listed directory, too, along with all of its " "contents.\n" msgstr "" #: src/rm.c:168 #, c-format msgid "" "\n" "To remove a file whose name starts with a '-', for example '-foo',\n" "use one of these commands:\n" " %s -- -foo\n" "\n" " %s ./-foo\n" msgstr "" #: src/rm.c:177 msgid "" "\n" "Note that if you use rm to remove a file, it might be possible to recover\n" "some of its contents, given sufficient expertise and/or time. For greater\n" "assurance that the contents are truly unrecoverable, consider using shred.\n" msgstr "" #: src/rm.c:340 #, c-format msgid "%s: remove % argument recursively? " msgid_plural "%s: remove % arguments recursively? " msgstr[0] "" msgstr[1] "" #: src/rm.c:343 #, c-format msgid "%s: remove % argument? " msgid_plural "%s: remove % arguments? " msgstr[0] "" msgstr[1] "" #: src/rmdir.c:134 src/rmdir.c:233 #, c-format msgid "removing directory, %s" msgstr "" #: src/rmdir.c:148 #, c-format msgid "failed to remove directory %s" msgstr "" #: src/rmdir.c:165 msgid "" "Remove the DIRECTORY(ies), if they are empty.\n" "\n" " --ignore-fail-on-non-empty\n" " ignore each failure that is solely because a directory\n" " is non-empty\n" msgstr "" #: src/rmdir.c:172 msgid "" " -p, --parents remove DIRECTORY and its ancestors; e.g., 'rmdir -p a/b/c' " "is\n" " similar to 'rmdir a/b/c a/b a'\n" " -v, --verbose output a diagnostic for every directory processed\n" msgstr "" #: src/rmdir.c:242 #, c-format msgid "failed to remove %s" msgstr "" #: src/runcon.c:83 #, c-format msgid "" "Usage: %s CONTEXT COMMAND [args]\n" " or: %s [ -c ] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" msgstr "" #: src/runcon.c:81 msgid "" "Run a program in a different SELinux security context.\n" "With neither CONTEXT nor COMMAND, print the current security context.\n" msgstr "" #: src/runcon.c:94 msgid "" " CONTEXT Complete security context\n" " -c, --compute compute process transition context before modifying\n" " -t, --type=TYPE type (for same role as parent)\n" " -u, --user=USER user identity\n" " -r, --role=ROLE role\n" " -l, --range=RANGE levelrange\n" "\n" msgstr "" #: src/runcon.c:144 #, c-format msgid "multiple roles" msgstr "" #: src/runcon.c:149 #, c-format msgid "multiple types" msgstr "" #: src/runcon.c:154 #, c-format msgid "multiple users" msgstr "" #: src/runcon.c:159 #, c-format msgid "multiple levelranges" msgstr "" #: src/runcon.c:177 src/runcon.c:213 #, c-format msgid "failed to get current context" msgstr "" #: src/runcon.c:187 #, c-format msgid "you must specify -c, -t, -u, -l, -r, or context" msgstr "" #: src/runcon.c:195 #, c-format msgid "no command specified" msgstr "" #: src/runcon.c:201 #, c-format msgid "%s may be used only on a SELinux kernel" msgstr "" #: src/runcon.c:227 #, c-format msgid "failed to compute a new context" msgstr "" #: src/runcon.c:235 #, c-format msgid "failed to set new user: %s" msgstr "" #: src/runcon.c:238 #, c-format msgid "failed to set new type: %s" msgstr "" #: src/runcon.c:241 #, c-format msgid "failed to set new range: %s" msgstr "" #: src/runcon.c:244 #, c-format msgid "failed to set new role: %s" msgstr "" #: src/runcon.c:255 #, c-format msgid "unable to set security context %s" msgstr "" #: src/selinux.c:126 src/selinux.c:299 #, c-format msgid "error canonicalizing %s" msgstr "" #: src/seq.c:68 #, c-format msgid "" "Usage: %s [OPTION]... LAST\n" " or: %s [OPTION]... FIRST LAST\n" " or: %s [OPTION]... FIRST INCREMENT LAST\n" msgstr "" #: src/seq.c:73 msgid "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" msgstr "" #: src/seq.c:79 msgid "" " -f, --format=FORMAT use printf style floating-point FORMAT\n" " -s, --separator=STRING use STRING to separate numbers (default: \\n)\n" " -w, --equal-width equalize width by padding with leading zeroes\n" msgstr "" #: src/seq.c:86 msgid "" "\n" "If FIRST or INCREMENT is omitted, it defaults to 1. That is, an\n" "omitted INCREMENT defaults to 1 even when LAST is smaller than FIRST.\n" "The sequence of numbers ends when the sum of the current number and\n" "INCREMENT would become greater than LAST.\n" "FIRST, INCREMENT, and LAST are interpreted as floating point values.\n" "INCREMENT is usually positive if FIRST is smaller than LAST, and\n" "INCREMENT is usually negative if FIRST is greater than LAST.\n" msgstr "" #: src/seq.c:94 msgid "" "FORMAT must be suitable for printing one argument of type 'double';\n" "it defaults to %.PRECf if FIRST, INCREMENT, and LAST are all fixed point\n" "decimal numbers with maximum precision PREC, and to %g otherwise.\n" msgstr "" #: src/seq.c:140 #, c-format msgid "invalid floating point argument: %s" msgstr "" #: src/seq.c:232 #, c-format msgid "format %s has unknown %%%c directive" msgstr "" #: src/seq.c:555 #, c-format msgid "format string may not be specified when printing equal width strings" msgstr "" #: src/set-fields.c:169 msgid "invalid byte or character range" msgstr "" #: src/set-fields.c:170 msgid "invalid field range" msgstr "" #: src/set-fields.c:177 src/set-fields.c:223 msgid "byte/character positions are numbered from 1" msgstr "" #: src/set-fields.c:178 src/set-fields.c:224 msgid "fields are numbered from 1" msgstr "" #: src/cut.c:387 msgid "invalid range with no endpoint: -" msgstr "" #: src/cut.c:403 msgid "invalid decreasing range" msgstr "" #: src/set-fields.c:261 #, c-format msgid "byte/character offset %s is too large" msgstr "" #: src/cut.c:485 #, c-format msgid "field number %s is too large" msgstr "" #: src/set-fields.c:273 #, c-format msgid "invalid byte/character position %s" msgstr "" #: src/set-fields.c:274 #, c-format msgid "invalid field value %s" msgstr "" #: src/set-fields.c:282 msgid "missing list of byte/character positions" msgstr "" #: src/cut.c:870 msgid "missing list of fields" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/shred.c:74 msgid "Colin Plumb" msgstr "" #: src/shred.c:148 msgid "" "Overwrite the specified FILE(s) repeatedly, in order to make it harder\n" "for even very expensive hardware probing to recover the data.\n" msgstr "" #: src/shred.c:173 msgid "" "\n" "If FILE is -, shred standard output.\n" msgstr "" #: src/shred.c:155 #, c-format msgid "" " -f, --force change permissions to allow writing if necessary\n" " -n, --iterations=N overwrite N times instead of the default (%d)\n" " --random-source=FILE get random bytes from FILE\n" " -s, --size=N shred this many bytes (suffixes like K, M, G accepted)\n" msgstr "" #: src/shred.c:186 msgid "" " -u truncate and remove file after overwriting\n" " --remove[=HOW] like -u but give control on HOW to delete; See below\n" " -v, --verbose show progress\n" " -x, --exact do not round file sizes up to the next full block;\n" " this is the default for non-regular files\n" " -z, --zero add a final overwrite with zeros to hide shredding\n" msgstr "" #: src/shred.c:196 msgid "" "\n" "Delete FILE(s) if --remove (-u) is specified. The default is not to remove\n" "the files because it is common to operate on device files like /dev/hda,\n" "and those files usually should not be removed.\n" "The optional HOW parameter indicates how to remove a directory entry:\n" "'unlink' => use a standard unlink call.\n" "'wipe' => also first obfuscate bytes in the name.\n" "'wipesync' => also sync each obfuscated byte to disk.\n" "The default mode is 'wipesync', but note it can be expensive.\n" "\n" msgstr "" #: src/shred.c:180 msgid "" "CAUTION: Note that shred relies on a very important assumption:\n" "that the file system overwrites data in place. This is the traditional\n" "way to do things, but many modern file system designs do not satisfy this\n" "assumption. The following are examples of file systems on which shred is\n" "not effective, or is not guaranteed to be effective in all file system " "modes:\n" "\n" msgstr "" #: src/shred.c:188 msgid "" "* log-structured or journaled file systems, such as those supplied with\n" "AIX and Solaris (and JFS, ReiserFS, XFS, Ext3, etc.)\n" "\n" "* file systems that write redundant data and carry on even if some writes\n" "fail, such as RAID-based file systems\n" "\n" "* file systems that make snapshots, such as Network Appliance's NFS server\n" "\n" msgstr "" #: src/shred.c:198 msgid "" "* file systems that cache in temporary locations, such as NFS\n" "version 3 clients\n" "\n" "* compressed file systems\n" "\n" msgstr "" #: src/shred.c:205 msgid "" "In the case of ext3 file systems, the above disclaimer applies\n" "(and shred is thus of limited effectiveness) only in data=journal mode,\n" "which journals file data in addition to just metadata. In both the\n" "data=ordered (default) and data=writeback modes, shred works as usual.\n" "Ext3 journaling modes can be changed by adding the data=something option\n" "to the mount options for a particular file system in the /etc/fstab file,\n" "as documented in the mount man page (man mount).\n" "\n" msgstr "" #: src/shred.c:215 msgid "" "In addition, file system backups and remote mirrors may contain copies\n" "of the file that cannot be removed, and that will allow a shredded file\n" "to be recovered later.\n" msgstr "" #: src/shred.c:295 #, c-format msgid "%s: fdatasync failed" msgstr "" #: src/shred.c:306 #, c-format msgid "%s: fsync failed" msgstr "" #: src/shred.c:383 #, c-format msgid "%s: cannot rewind" msgstr "" #: src/shred.c:402 #, c-format msgid "%s: pass %lu/%lu (%s)..." msgstr "" #: src/shred.c:452 #, c-format msgid "%s: error writing at offset %s" msgstr "" #: src/shred.c:470 #, c-format msgid "%s: lseek failed" msgstr "" #: src/shred.c:481 #, c-format msgid "%s: file too large" msgstr "" #: src/shred.c:504 #, c-format msgid "%s: pass %lu/%lu (%s)...%s" msgstr "" #: src/shred.c:520 #, c-format msgid "%s: pass %lu/%lu (%s)...%s/%s %d%%" msgstr "" #: src/shred.c:767 #, c-format msgid "%s: fstat failed" msgstr "" #: src/shred.c:778 #, c-format msgid "%s: invalid file type" msgstr "" #: src/shred.c:797 #, c-format msgid "%s: file has negative size" msgstr "" #: src/shred.c:864 src/sort.c:932 src/split.c:378 #, c-format msgid "%s: error truncating" msgstr "" #: src/shred.c:880 #, c-format msgid "%s: fcntl failed" msgstr "" #: src/shred.c:885 #, c-format msgid "%s: cannot shred append-only file descriptor" msgstr "" #: src/shred.c:967 #, c-format msgid "%s: removing" msgstr "" #: src/shred.c:991 #, c-format msgid "%s: renamed to %s" msgstr "" #: src/shred.c:1013 #, c-format msgid "%s: failed to remove" msgstr "" #: src/shred.c:1017 #, c-format msgid "%s: removed" msgstr "" #: src/shred.c:1024 src/shred.c:1067 #, c-format msgid "%s: failed to close" msgstr "" #: src/shred.c:1060 #, c-format msgid "%s: failed to open for writing" msgstr "" #: src/shred.c:1250 msgid "invalid number of passes" msgstr "" #: src/shred.c:1134 src/shuf.c:290 src/sort.c:4441 #, c-format msgid "multiple random sources specified" msgstr "" #: src/shred.c:1269 msgid "invalid file size" msgstr "" #: src/shuf.c:48 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]\n" " or: %s -e [OPTION]... [ARG]...\n" " or: %s -i LO-HI [OPTION]...\n" msgstr "" #: src/shuf.c:54 msgid "Write a random permutation of the input lines to standard output.\n" msgstr "" #: src/shuf.c:74 msgid "" " -e, --echo treat each ARG as an input line\n" " -i, --input-range=LO-HI treat each number LO through HI as an input " "line\n" " -n, --head-count=COUNT output at most COUNT lines\n" " -o, --output=FILE write result to FILE instead of standard output\n" " --random-source=FILE get random bytes from FILE\n" " -r, --repeat output lines can be repeated\n" msgstr "" #: src/shuf.c:225 #, c-format msgid "too many input lines" msgstr "" #: src/shuf.c:244 #, c-format msgid "multiple -i options specified" msgstr "" #: src/shuf.c:434 src/shuf.c:440 src/shuf.c:445 msgid "invalid input range" msgstr "" #: src/shuf.c:458 #, c-format msgid "invalid line count: %s" msgstr "" #: src/shuf.c:284 src/sort.c:4435 #, c-format msgid "multiple output files specified" msgstr "" #: src/shuf.c:310 #, c-format msgid "cannot combine -e and -i options" msgstr "" #: src/shuf.c:579 #, c-format msgid "no lines to repeat" msgstr "" #: src/sleep.c:44 #, c-format msgid "" "Usage: %s NUMBER[SUFFIX]...\n" " or: %s OPTION\n" "Pause for NUMBER seconds. SUFFIX may be 's' for seconds (the default),\n" "'m' for minutes, 'h' for hours or 'd' for days. Unlike most " "implementations\n" "that require NUMBER be an integer, here NUMBER may be an arbitrary floating\n" "point number. Given two or more arguments, pause for the amount of time\n" "specified by the sum of their values.\n" "\n" msgstr "" #: src/sleep.c:135 src/timeout.c:320 #, c-format msgid "invalid time interval %s" msgstr "" #: src/sleep.c:146 src/tail.c:1219 #, c-format msgid "cannot read realtime clock" msgstr "" #: src/sort.c:399 msgid "Write sorted concatenation of all FILE(s) to standard output.\n" msgstr "" #: src/sort.c:405 msgid "" "Ordering options:\n" "\n" msgstr "" #: src/sort.c:409 msgid "" " -b, --ignore-leading-blanks ignore leading blanks\n" " -d, --dictionary-order consider only blanks and alphanumeric " "characters\n" " -f, --ignore-case fold lower case to upper case characters\n" msgstr "" #: src/sort.c:415 msgid "" " -g, --general-numeric-sort compare according to general numerical value\n" " -i, --ignore-nonprinting consider only printable characters\n" " -M, --month-sort compare (unknown) < 'JAN' < ... < 'DEC'\n" msgstr "" #: src/sort.c:420 msgid "" " -h, --human-numeric-sort compare human readable numbers (e.g., 2K 1G)\n" msgstr "" #: src/sort.c:452 msgid "" " -n, --numeric-sort compare according to string numerical value\n" " -R, --random-sort shuffle, but group identical keys. See " "shuf(1)\n" " --random-source=FILE get random bytes from FILE\n" " -r, --reverse reverse the result of comparisons\n" msgstr "" #: src/sort.c:429 msgid "" " --sort=WORD sort according to WORD:\n" " general-numeric -g, human-numeric -h, month -" "M,\n" " numeric -n, random -R, version -V\n" " -V, --version-sort natural sort of (version) numbers within text\n" "\n" msgstr "" #: src/sort.c:437 msgid "" "Other options:\n" "\n" msgstr "" #: src/sort.c:441 msgid "" " --batch-size=NMERGE merge at most NMERGE inputs at once;\n" " for more use temp files\n" msgstr "" #: src/sort.c:445 msgid "" " -c, --check, --check=diagnose-first check for sorted input; do not sort\n" " -C, --check=quiet, --check=silent like -c, but do not report first bad " "line\n" " --compress-program=PROG compress temporaries with PROG;\n" " decompress them with PROG -d\n" msgstr "" #: src/sort.c:452 msgid "" " --debug annotate the part of the line used to sort,\n" " and warn about questionable usage to stderr\n" " --files0-from=F read input from the files specified by\n" " NUL-terminated names in file F;\n" " If F is - then read names from standard input\n" msgstr "" #: src/sort.c:459 msgid "" " -k, --key=KEYDEF sort via a key; KEYDEF gives location and type\n" " -m, --merge merge already sorted files; do not sort\n" msgstr "" #: src/sort.c:463 msgid "" " -o, --output=FILE write result to FILE instead of standard output\n" " -s, --stable stabilize sort by disabling last-resort " "comparison\n" " -S, --buffer-size=SIZE use SIZE for main memory buffer\n" msgstr "" #: src/sort.c:469 #, c-format msgid "" " -t, --field-separator=SEP use SEP instead of non-blank to blank " "transition\n" " -T, --temporary-directory=DIR use DIR for temporaries, not $TMPDIR or " "%s;\n" " multiple options specify multiple directories\n" " --parallel=N change the number of sorts run concurrently to " "N\n" " -u, --unique with -c, check for strict ordering;\n" " without -c, output only the first of an equal " "run\n" msgstr "" #: src/sort.c:512 msgid "" "\n" "KEYDEF is F[.C][OPTS][,F[.C][OPTS]] for start and stop position, where F is " "a\n" "field number and C a character position in the field; both are origin 1, " "and\n" "the stop position defaults to the line's end. If neither -t nor -b is in\n" "effect, characters in a field are counted from the beginning of the " "preceding\n" "whitespace. OPTS is one or more single-letter ordering options " "[bdfgiMhnRrV],\n" "which override global ordering options for that key. If no key is given, " "use\n" "the entire line as the key. Use --debug to diagnose incorrect key usage.\n" "\n" "SIZE may be followed by the following multiplicative suffixes:\n" msgstr "" #: src/sort.c:525 msgid "" "% 1% of memory, b 1, K 1024 (default), and so on for M, G, T, P, E, Z, Y.\n" "\n" "*** WARNING ***\n" "The locale specified by the environment affects sort order.\n" "Set LC_ALL=C to get the traditional sort order that uses\n" "native byte values.\n" msgstr "" #: src/sort.c:697 #, c-format msgid "waiting for %s [-d]" msgstr "" #: src/sort.c:702 #, c-format msgid "%s [-d] terminated abnormally" msgstr "" #: src/sort.c:856 #, c-format msgid "cannot create temporary file in %s" msgstr "" #: src/sort.c:950 src/sort.c:2025 src/sort.c:3071 src/sort.c:3713 #: src/sort.c:3804 src/sort.c:3807 msgid "open failed" msgstr "" #: src/sort.c:970 msgid "fflush failed" msgstr "" #: src/sort.c:975 src/sort.c:2028 src/sort.c:4706 msgid "close failed" msgstr "" #: src/sort.c:1110 msgid "couldn't create temporary file" msgstr "" #: src/sort.c:1149 #, c-format msgid "couldn't create process for %s -d" msgstr "" #: src/sort.c:1220 #, c-format msgid "warning: cannot remove: %s" msgstr "" #: src/sort.c:1306 #, c-format msgid "invalid --%s argument %s" msgstr "" #: src/sort.c:1309 #, c-format msgid "minimum --%s argument is %s" msgstr "" #: src/sort.c:1324 #, c-format msgid "--%s argument %s too large" msgstr "" #: src/sort.c:1327 #, c-format msgid "maximum --%s argument with current rlimit is %s" msgstr "" #: src/sort.c:1409 #, c-format msgid "number in parallel must be nonzero" msgstr "" #: src/sort.c:1494 msgid "stat failed" msgstr "" #: src/sort.c:1755 msgid "read failed" msgstr "" #: src/sort.c:2043 #, c-format msgid "string transformation failed" msgstr "" #: src/sort.c:2046 #, c-format msgid "the untransformed string was %s" msgstr "" #: src/sort.c:2209 #, c-format msgid "^ no match for key\n" msgstr "" #: src/sort.c:2389 #, c-format msgid "obsolescent key %s used; consider %s instead" msgstr "" #: src/sort.c:2395 #, c-format msgid "key %lu has zero width and will be ignored" msgstr "" #: src/sort.c:2406 #, c-format msgid "" "leading blanks are significant in key %lu; consider also specifying 'b'" msgstr "" #: src/sort.c:2419 #, c-format msgid "key %lu is numeric and spans multiple fields" msgstr "" #: src/sort.c:2451 #, c-format msgid "option '-%s' is ignored" msgid_plural "options '-%s' are ignored" msgstr[0] "" msgstr[1] "" #: src/sort.c:2457 #, c-format msgid "option '-r' only applies to last-resort comparison" msgstr "" #: src/sort.c:2731 src/sort.c:2740 msgid "write failed" msgstr "" #: src/sort.c:2783 #, c-format msgid "%s: %s:%s: disorder: " msgstr "" #: src/sort.c:2786 msgid "standard error" msgstr "" #: src/sort.c:3698 msgid "cannot read" msgstr "" #: src/sort.c:3976 #, c-format msgid "%s: invalid field specification %s" msgstr "" #: src/sort.c:3987 #, c-format msgid "options '-%s' are incompatible" msgstr "" #: src/sort.c:4038 #, c-format msgid "%s: invalid count at start of %s" msgstr "" #: src/sort.c:4295 msgid "invalid number after '-'" msgstr "" #: src/sort.c:4302 src/sort.c:4388 src/sort.c:4416 msgid "invalid number after '.'" msgstr "" #: src/sort.c:4315 src/sort.c:4421 msgid "stray character in field spec" msgstr "" #: src/sort.c:4362 #, c-format msgid "multiple compress programs specified" msgstr "" #: src/sort.c:4379 msgid "invalid number at field start" msgstr "" #: src/sort.c:4383 src/sort.c:4411 msgid "field number is zero" msgstr "" #: src/sort.c:4392 msgid "character offset is zero" msgstr "" #: src/sort.c:4407 msgid "invalid number after ','" msgstr "" #: src/sort.c:4457 #, c-format msgid "empty tab" msgstr "" #: src/sort.c:4550 src/wc.c:692 #, c-format msgid "cannot read file names from %s" msgstr "" #: src/sort.c:4572 #, c-format msgid "%s:%lu: invalid zero-length file name" msgstr "" #: src/sort.c:4578 #, c-format msgid "no input from %s" msgstr "" #: src/sort.c:4624 #, c-format msgid "using %s sorting rules" msgstr "" #: src/sort.c:4674 msgid "failed to set locale; " msgstr "" #: src/sort.c:4627 #, c-format msgid "using simple byte comparison" msgstr "" #: src/sort.c:4658 #, c-format msgid "extra operand %s not allowed with -%c" msgstr "" #: src/split.c:207 #, c-format msgid "the suffix length needs to be at least %" msgstr "" #: src/split.c:224 #, c-format msgid "Usage: %s [OPTION]... [FILE [PREFIX]]\n" msgstr "" #: src/split.c:228 msgid "" "Output pieces of FILE to PREFIXaa, PREFIXab, ...;\n" "default size is 1000 lines, and default PREFIX is 'x'.\n" msgstr "" #: src/split.c:236 #, c-format msgid "" " -a, --suffix-length=N generate suffixes of length N (default %d)\n" " --additional-suffix=SUFFIX append an additional SUFFIX to file names\n" " -b, --bytes=SIZE put SIZE bytes per output file\n" " -C, --line-bytes=SIZE put at most SIZE bytes of records per output file\n" " -d use numeric suffixes starting at 0, not " "alphabetic\n" " --numeric-suffixes[=FROM] same as -d, but allow setting the start " "value\n" " -e, --elide-empty-files do not generate empty output files with '-n'\n" " --filter=COMMAND write to shell COMMAND; file name is $FILE\n" " -l, --lines=NUMBER put NUMBER lines/records per output file\n" " -n, --number=CHUNKS generate CHUNKS output files; see explanation " "below\n" " -t, --separator=SEP use SEP instead of newline as the record " "separator;\n" " '\\0' (zero) specifies the NUL character\n" " -u, --unbuffered immediately copy input to output with '-n r/...'\n" msgstr "" #: src/split.c:229 msgid "" " --verbose print a diagnostic just before each\n" " output file is opened\n" msgstr "" #: src/split.c:259 msgid "" "\n" "CHUNKS may be:\n" " N split into N files based on size of input\n" " K/N output Kth of N to stdout\n" " l/N split into N files without splitting lines/records\n" " l/K/N output Kth of N to stdout without splitting lines/records\n" " r/N like 'l' but use round robin distribution\n" " r/K/N likewise but only output Kth of N to stdout\n" msgstr "" #: src/split.c:354 #, c-format msgid "output file suffixes exhausted" msgstr "" #: src/split.c:366 #, c-format msgid "creating file %s\n" msgstr "" #: src/split.c:375 #, c-format msgid "%s would overwrite input; aborting" msgstr "" #: src/split.c:391 #, c-format msgid "failed to set FILE environment variable" msgstr "" #: src/split.c:393 #, c-format msgid "executing with FILE=%s\n" msgstr "" #: src/split.c:395 #, c-format msgid "failed to create pipe" msgstr "" #: src/split.c:409 #, c-format msgid "closing prior pipe" msgstr "" #: src/split.c:411 #, c-format msgid "closing output pipe" msgstr "" #: src/split.c:415 #, c-format msgid "moving input pipe" msgstr "" #: src/split.c:417 #, c-format msgid "closing input pipe" msgstr "" #: src/split.c:422 #, c-format msgid "failed to run command: \"%s -c %s\"" msgstr "" #: src/split.c:428 #, c-format msgid "failed to close input pipe" msgstr "" #: src/split.c:464 #, c-format msgid "waiting for child process" msgstr "" #: src/split.c:474 #, c-format msgid "with FILE=%s, signal %s from command: %s" msgstr "" #: src/split.c:482 #, c-format msgid "with FILE=%s, exit %d from command: %s" msgstr "" #: src/split.c:489 src/timeout.c:494 #, c-format msgid "unknown status from command (0x%X)" msgstr "" #: src/split.c:1052 #, c-format msgid "cannot split in more than one way" msgstr "" #: src/split.c:1218 src/split.c:1333 src/split.c:1546 msgid "invalid number of chunks" msgstr "" #: src/split.c:1223 msgid "invalid chunk number" msgstr "" #: src/split.c:1270 msgid "invalid suffix length" msgstr "" #: src/split.c:1344 #, c-format msgid "empty record separator" msgstr "" #: src/split.c:1355 #, c-format msgid "multi-character separator %s" msgstr "" #: src/split.c:1363 #, c-format msgid "multiple separator characters specified" msgstr "" #: src/split.c:1236 #, c-format msgid "line count option -%s%c... is too large" msgstr "" #: src/split.c:1248 #, c-format msgid "%s: invalid start value for numerical suffix" msgstr "" #: src/split.c:1430 msgid "invalid IO block size" msgstr "" #: src/split.c:1297 #, c-format msgid "--filter does not process a chunk extracted to stdout" msgstr "" #: src/split.c:1334 #, c-format msgid "numerical suffix start value is too large for the suffix length" msgstr "" #: src/split.c:1369 #, c-format msgid "%s: cannot determine file size" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/stat.c:173 msgid "Michael Meskes" msgstr "" #: src/stat.c:857 #, c-format msgid "failed to canonicalize %s" msgstr "" #: src/stat.c:1069 #, c-format msgid "warning: unrecognized escape '\\%c'" msgstr "" #: src/stat.c:1124 #, c-format msgid "%s: invalid directive" msgstr "" #: src/stat.c:1170 #, c-format msgid "warning: backslash at end of format" msgstr "" #: src/stat.c:1201 #, c-format msgid "using %s to denote standard input does not work in file system mode" msgstr "" #: src/stat.c:1208 #, c-format msgid "cannot read file system information for %s" msgstr "" #: src/stat.c:1228 #, c-format msgid "cannot stat standard input" msgstr "" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' with --file-system, and NOT from printf. #: src/stat.c:1264 msgid "" " File: \"%n\"\n" " ID: %-8i Namelen: %-7l Type: %T\n" "Block size: %-10s Fundamental block size: %S\n" "Blocks: Total: %-10b Free: %-10f Available: %a\n" "Inodes: Total: %-10c Free: %d\n" msgstr "" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1287 msgid "" " File: %N\n" " Size: %-10s\tBlocks: %-10b IO Block: %-6o %F\n" msgstr "" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1297 msgid "Device: %Dh/%dd\tInode: %-10i Links: %-5h Device type: %t,%T\n" msgstr "" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1305 msgid "Device: %Dh/%dd\tInode: %-10i Links: %h\n" msgstr "" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1314 msgid "Access: (%04a/%10.10A) Uid: (%5u/%8U) Gid: (%5g/%8G)\n" msgstr "" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1324 #, c-format msgid "Context: %C\n" msgstr "" #: src/stat.c:1332 msgid "" "Access: %x\n" "Modify: %y\n" "Change: %z\n" " Birth: %w\n" msgstr "" #: src/stat.c:1350 msgid "Display file or file system status.\n" msgstr "" #: src/stat.c:1356 msgid "" " -L, --dereference follow links\n" " -f, --file-system display file system status instead of file status\n" msgstr "" #: src/stat.c:1442 msgid "" " -c --format=FORMAT use the specified FORMAT instead of the default;\n" " output a newline after each use of FORMAT\n" " --printf=FORMAT like --format, but interpret backslash escapes,\n" " and do not output a mandatory trailing newline;\n" " if you want a newline, include \\n in FORMAT\n" " -t, --terse print the information in terse form\n" msgstr "" #: src/stat.c:1453 msgid "" "\n" "The valid format sequences for files (without --file-system):\n" "\n" " %a access rights in octal (note '#' and '0' printf flags)\n" " %A access rights in human readable form\n" " %b number of blocks allocated (see %B)\n" " %B the size in bytes of each block reported by %b\n" " %C SELinux security context string\n" msgstr "" #: src/stat.c:1380 msgid "" " %d device number in decimal\n" " %D device number in hex\n" " %f raw mode in hex\n" " %F file type\n" " %g group ID of owner\n" " %G group name of owner\n" msgstr "" #: src/stat.c:1470 msgid "" " %h number of hard links\n" " %i inode number\n" " %m mount point\n" " %n file name\n" " %N quoted file name with dereference if symbolic link\n" " %o optimal I/O transfer size hint\n" " %s total size, in bytes\n" " %t major device type in hex, for character/block device special files\n" " %T minor device type in hex, for character/block device special files\n" msgstr "" #: src/stat.c:1481 msgid "" " %u user ID of owner\n" " %U user name of owner\n" " %w time of file birth, human-readable; - if unknown\n" " %W time of file birth, seconds since Epoch; 0 if unknown\n" " %x time of last access, human-readable\n" " %X time of last access, seconds since Epoch\n" " %y time of last data modification, human-readable\n" " %Y time of last data modification, seconds since Epoch\n" " %z time of last status change, human-readable\n" " %Z time of last status change, seconds since Epoch\n" "\n" msgstr "" #: src/stat.c:1413 msgid "" "Valid format sequences for file systems:\n" "\n" " %a free blocks available to non-superuser\n" " %b total data blocks in file system\n" " %c total file nodes in file system\n" " %d free file nodes in file system\n" " %f free blocks in file system\n" msgstr "" #: src/stat.c:1422 msgid "" " %i file system ID in hex\n" " %l maximum length of filenames\n" " %n file name\n" " %s block size (for faster transfers)\n" " %S fundamental block size (for block counts)\n" " %t file system type in hex\n" " %T file system type in human readable form\n" msgstr "" #: src/stdbuf.c:90 #, c-format msgid "Usage: %s OPTION... COMMAND\n" msgstr "" #: src/stdbuf.c:91 msgid "" "Run COMMAND, with modified buffering operations for its standard streams.\n" msgstr "" #: src/stdbuf.c:97 msgid "" " -i, --input=MODE adjust standard input stream buffering\n" " -o, --output=MODE adjust standard output stream buffering\n" " -e, --error=MODE adjust standard error stream buffering\n" msgstr "" #: src/stdbuf.c:104 msgid "" "\n" "If MODE is 'L' the corresponding stream will be line buffered.\n" "This option is invalid with standard input.\n" msgstr "" #: src/stdbuf.c:107 msgid "" "\n" "If MODE is '0' the corresponding stream will be unbuffered.\n" msgstr "" #: src/stdbuf.c:110 msgid "" "\n" "Otherwise MODE is a number which may be followed by one of the following:\n" "KB 1000, K 1024, MB 1000*1000, M 1024*1024, and so on for G, T, P, E, Z, Y.\n" "In this case the corresponding stream will be fully buffered with the " "buffer\n" "size set to MODE bytes.\n" msgstr "" #: src/stdbuf.c:116 msgid "" "\n" "NOTE: If COMMAND adjusts the buffering of its standard streams ('tee' does\n" "for example) then that will override corresponding changes by 'stdbuf'.\n" "Also some filters (like 'dd' and 'cat' etc.) don't use streams for I/O,\n" "and are thus unaffected by 'stdbuf' settings.\n" msgstr "" #: src/stdbuf.c:226 #, c-format msgid "failed to find %s" msgstr "" #: src/stdbuf.c:246 src/stdbuf.c:278 #, c-format msgid "failed to update the environment with %s" msgstr "" #: src/stdbuf.c:320 #, c-format msgid "line buffering stdin is meaningless" msgstr "" #: src/stdbuf.c:376 #, c-format msgid "you must specify a buffering mode option" msgstr "" #: src/stty.c:513 #, c-format msgid "" "Usage: %s [-F DEVICE | --file=DEVICE] [SETTING]...\n" " or: %s [-F DEVICE | --file=DEVICE] [-a|--all]\n" " or: %s [-F DEVICE | --file=DEVICE] [-g|--save]\n" msgstr "" #: src/stty.c:519 msgid "Print or change terminal characteristics.\n" msgstr "" #: src/stty.c:525 msgid "" " -a, --all print all current settings in human-readable form\n" " -g, --save print all current settings in a stty-readable form\n" " -F, --file=DEVICE open and use the specified DEVICE instead of stdin\n" msgstr "" #: src/stty.c:532 msgid "" "\n" "Optional - before SETTING indicates negation. An * marks non-POSIX\n" "settings. The underlying system defines which settings are available.\n" msgstr "" #: src/stty.c:554 msgid "" "\n" "Special characters:\n" msgstr "" #: src/stty.c:558 msgid " * discard CHAR CHAR will toggle discarding of output\n" msgstr "" #: src/stty.c:563 msgid "" " * dsusp CHAR CHAR will send a terminal stop signal once input flushed\n" msgstr "" #: src/stty.c:567 msgid "" " eof CHAR CHAR will send an end of file (terminate the input)\n" " eol CHAR CHAR will end the line\n" msgstr "" #: src/stty.c:572 msgid " * eol2 CHAR alternate CHAR for ending the line\n" msgstr "" #: src/stty.c:576 msgid "" " erase CHAR CHAR will erase the last character typed\n" " intr CHAR CHAR will send an interrupt signal\n" " kill CHAR CHAR will erase the current line\n" msgstr "" #: src/stty.c:582 msgid " * lnext CHAR CHAR will enter the next character quoted\n" msgstr "" #: src/stty.c:587 msgid " * status CHAR CHAR will send an info signal\n" msgstr "" #: src/stty.c:591 msgid " quit CHAR CHAR will send a quit signal\n" msgstr "" #: src/stty.c:595 msgid " * rprnt CHAR CHAR will redraw the current line\n" msgstr "" #: src/stty.c:599 msgid "" " start CHAR CHAR will restart the output after stopping it\n" " stop CHAR CHAR will stop the output\n" " susp CHAR CHAR will send a terminal stop signal\n" msgstr "" #: src/stty.c:605 msgid " * swtch CHAR CHAR will switch to a different shell layer\n" msgstr "" #: src/stty.c:610 msgid " * werase CHAR CHAR will erase the last word typed\n" msgstr "" #: src/stty.c:614 msgid "" "\n" "Special settings:\n" " N set the input and output speeds to N bauds\n" msgstr "" #: src/stty.c:620 msgid "" " * cols N tell the kernel that the terminal has N columns\n" " * columns N same as cols N\n" msgstr "" #: src/stty.c:625 #, c-format msgid "" " * [-]drain wait for transmission before applying settings (%s by " "default)\n" msgstr "" #: src/stty.c:627 msgid "on" msgstr "" #: src/stty.c:627 msgid "off" msgstr "" #: src/stty.c:628 msgid " ispeed N set the input speed to N\n" msgstr "" #: src/stty.c:632 msgid " * line N use line discipline N\n" msgstr "" #: src/stty.c:636 msgid "" " min N with -icanon, set N characters minimum for a completed " "read\n" " ospeed N set the output speed to N\n" msgstr "" #: src/stty.c:641 msgid "" " * rows N tell the kernel that the terminal has N rows\n" " * size print the number of rows and columns according to the " "kernel\n" msgstr "" #: src/stty.c:646 msgid "" " speed print the terminal speed\n" " time N with -icanon, set read timeout of N tenths of a second\n" msgstr "" #: src/stty.c:650 msgid "" "\n" "Control settings:\n" " [-]clocal disable modem control signals\n" " [-]cread allow input to be received\n" msgstr "" #: src/stty.c:657 msgid " * [-]crtscts enable RTS/CTS handshaking\n" msgstr "" #: src/stty.c:662 msgid " * [-]cdtrdsr enable DTR/DSR handshaking\n" msgstr "" #: src/stty.c:666 msgid " csN set character size to N bits, N in [5..8]\n" msgstr "" #: src/stty.c:590 msgid "" " [-]cstopb use two stop bits per character (one with '-')\n" " [-]hup send a hangup signal when the last process closes the tty\n" " [-]hupcl same as [-]hup\n" " [-]parenb generate parity bit in output and expect parity bit in " "input\n" " [-]parodd set odd parity (or even parity with '-')\n" msgstr "" #: src/stty.c:677 msgid " * [-]cmspar use \"stick\" (mark/space) parity\n" msgstr "" #: src/stty.c:681 msgid "" "\n" "Input settings:\n" " [-]brkint breaks cause an interrupt signal\n" " [-]icrnl translate carriage return to newline\n" " [-]ignbrk ignore break characters\n" " [-]igncr ignore carriage return\n" " [-]ignpar ignore characters with parity errors\n" msgstr "" #: src/stty.c:691 msgid "" " * [-]imaxbel beep and do not flush a full input buffer on a character\n" msgstr "" #: src/stty.c:695 msgid "" " [-]inlcr translate newline to carriage return\n" " [-]inpck enable input parity checking\n" " [-]istrip clear high (8th) bit of input characters\n" msgstr "" #: src/stty.c:612 msgid " * [-]iutf8 assume input characters are UTF-8 encoded\n" msgstr "" #: src/stty.c:706 msgid " * [-]iuclc translate uppercase characters to lowercase\n" msgstr "" #: src/stty.c:711 msgid "" " * [-]ixany let any character restart output, not only start character\n" msgstr "" #: src/stty.c:715 msgid "" " [-]ixoff enable sending of start/stop characters\n" " [-]ixon enable XON/XOFF flow control\n" " [-]parmrk mark parity errors (with a 255-0-character sequence)\n" " [-]tandem same as [-]ixoff\n" msgstr "" #: src/stty.c:721 msgid "" "\n" "Output settings:\n" msgstr "" #: src/stty.c:726 msgid " * bsN backspace delay style, N in [0..1]\n" msgstr "" #: src/stty.c:731 msgid " * crN carriage return delay style, N in [0..3]\n" msgstr "" #: src/stty.c:736 msgid " * ffN form feed delay style, N in [0..1]\n" msgstr "" #: src/stty.c:741 msgid " * nlN newline delay style, N in [0..1]\n" msgstr "" #: src/stty.c:746 msgid " * [-]ocrnl translate carriage return to newline\n" msgstr "" #: src/stty.c:751 msgid "" " * [-]ofdel use delete characters for fill instead of NUL characters\n" msgstr "" #: src/stty.c:756 msgid "" " * [-]ofill use fill (padding) characters instead of timing for delays\n" msgstr "" #: src/stty.c:761 msgid " * [-]olcuc translate lowercase characters to uppercase\n" msgstr "" #: src/stty.c:766 msgid " * [-]onlcr translate newline to carriage return-newline\n" msgstr "" #: src/stty.c:771 msgid " * [-]onlret newline performs a carriage return\n" msgstr "" #: src/stty.c:776 msgid " * [-]onocr do not print carriage returns in the first column\n" msgstr "" #: src/stty.c:780 msgid " [-]opost postprocess output\n" msgstr "" #: src/stty.c:784 msgid "" " * tabN horizontal tab delay style, N in [0..3]\n" " * tabs same as tab0\n" " * -tabs same as tab3\n" msgstr "" #: src/stty.c:791 msgid " * vtN vertical tab delay style, N in [0..1]\n" msgstr "" #: src/stty.c:795 msgid "" "\n" "Local settings:\n" " [-]crterase echo erase characters as backspace-space-backspace\n" msgstr "" #: src/stty.c:801 msgid "" " * crtkill kill all line by obeying the echoprt and echoe settings\n" " * -crtkill kill all line by obeying the echoctl and echok settings\n" msgstr "" #: src/stty.c:807 msgid " * [-]ctlecho echo control characters in hat notation ('^c')\n" msgstr "" #: src/stty.c:811 msgid " [-]echo echo input characters\n" msgstr "" #: src/stty.c:815 msgid " * [-]echoctl same as [-]ctlecho\n" msgstr "" #: src/stty.c:819 msgid "" " [-]echoe same as [-]crterase\n" " [-]echok echo a newline after a kill character\n" msgstr "" #: src/stty.c:824 msgid " * [-]echoke same as [-]crtkill\n" msgstr "" #: src/stty.c:828 msgid " [-]echonl echo newline even if not echoing other characters\n" msgstr "" #: src/stty.c:832 msgid "" " * [-]echoprt echo erased characters backward, between '\\' and '/'\n" msgstr "" #: src/stty.c:837 msgid "" " * [-]extproc enable \"LINEMODE\"; useful with high latency links\n" msgstr "" #: src/stty.c:842 msgid " * [-]flusho discard output\n" msgstr "" #: src/stty.c:846 #, c-format msgid "" " [-]icanon enable special characters: %s\n" " [-]iexten enable non-POSIX special characters\n" msgstr "" #: src/stty.c:857 msgid "" " [-]isig enable interrupt, quit, and suspend special characters\n" " [-]noflsh disable flushing after interrupt and quit special " "characters\n" msgstr "" #: src/stty.c:862 msgid " * [-]prterase same as [-]echoprt\n" msgstr "" #: src/stty.c:867 msgid "" " * [-]tostop stop background jobs that try to write to the terminal\n" msgstr "" #: src/stty.c:872 msgid "" " * [-]xcase with icanon, escape with '\\' for uppercase characters\n" msgstr "" #: src/stty.c:876 msgid "" "\n" "Combination settings:\n" msgstr "" #: src/stty.c:881 msgid " * [-]LCASE same as [-]lcase\n" msgstr "" #: src/stty.c:885 msgid "" " cbreak same as -icanon\n" " -cbreak same as icanon\n" msgstr "" #: src/stty.c:889 msgid "" " cooked same as brkint ignpar istrip icrnl ixon opost isig\n" " icanon, eof and eol characters to their default values\n" " -cooked same as raw\n" msgstr "" #: src/stty.c:894 #, c-format msgid " crt same as %s\n" msgstr "" #: src/stty.c:904 #, c-format msgid "" " dec same as %s intr ^c erase 0177\n" " kill ^u\n" msgstr "" #: src/stty.c:919 msgid " * [-]decctlq same as [-]ixany\n" msgstr "" #: src/stty.c:923 msgid "" " ek erase and kill characters to their default values\n" " evenp same as parenb -parodd cs7\n" " -evenp same as -parenb cs8\n" msgstr "" #: src/stty.c:929 msgid " * [-]lcase same as xcase iuclc olcuc\n" msgstr "" #: src/stty.c:933 msgid "" " litout same as -parenb -istrip -opost cs8\n" " -litout same as parenb istrip opost cs7\n" msgstr "" #: src/stty.c:937 #, c-format msgid "" " nl same as %s\n" " -nl same as %s\n" msgstr "" #: src/stty.c:703 msgid "" " oddp same as parenb parodd cs7\n" " -oddp same as -parenb cs8\n" " [-]parity same as [-]evenp\n" " pass8 same as -parenb -istrip cs8\n" " -pass8 same as parenb istrip cs7\n" msgstr "" #: src/stty.c:964 #, c-format msgid "" " raw same as -ignbrk -brkint -ignpar -parmrk -inpck -istrip\n" " -inlcr -igncr -icrnl -ixon -ixoff -icanon -opost\n" " -isig%s min 1 time 0\n" " -raw same as cooked\n" msgstr "" #: src/stty.c:983 #, c-format msgid "" " sane same as cread -ignbrk brkint -inlcr -igncr icrnl\n" " icanon iexten echo echoe echok -echonl -noflsh\n" " %s\n" " %s\n" " %s,\n" " all special characters to their default values\n" msgstr "" #: src/stty.c:724 msgid "" "\n" "Handle the tty line connected to standard input. Without arguments,\n" "prints baud rate, line discipline, and deviations from stty sane. In\n" "settings, CHAR is taken literally, or coded as in ^c, 0x37, 0177 or\n" "127; special values ^- or undef used to disable special characters.\n" msgstr "" #: src/stty.c:796 #, c-format msgid "only one device may be specified" msgstr "" #: src/stty.c:826 #, c-format msgid "" "the options for verbose and stty-readable output styles are\n" "mutually exclusive" msgstr "" #: src/stty.c:832 #, c-format msgid "when specifying an output style, modes may not be set" msgstr "" #: src/stty.c:847 #, c-format msgid "%s: couldn't reset non-blocking mode" msgstr "" #: src/stty.c:892 src/stty.c:1002 #, c-format msgid "invalid argument %s" msgstr "" #: src/stty.c:903 src/stty.c:920 src/stty.c:932 src/stty.c:945 src/stty.c:957 #: src/stty.c:977 #, c-format msgid "missing argument to %s" msgstr "" #: src/stty.c:1309 #, c-format msgid "%s: error setting %s" msgstr "" #: src/stty.c:983 #, c-format msgid "invalid line discipline %s" msgstr "" #: src/stty.c:1053 #, c-format msgid "%s: unable to perform all requested operations" msgstr "" #: src/stty.c:1399 #, c-format msgid "%s: no size information for this device" msgstr "" #: src/stty.c:2306 msgid "invalid integer argument" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/sum.c:37 msgid "Kayvan Aghaiepour" msgstr "" #: src/sum.c:62 msgid "Print checksum and block counts for each FILE.\n" msgstr "" #: src/sum.c:68 msgid "" "\n" " -r use BSD sum algorithm, use 1K blocks\n" " -s, --sysv use System V sum algorithm, use 512 bytes blocks\n" msgstr "" #: src/sync.c:63 #, c-format msgid "Usage: %s [OPTION] [FILE]...\n" msgstr "" #: src/sync.c:64 msgid "" "Synchronize cached writes to persistent storage\n" "\n" "If one or more files are specified, sync only them,\n" "or their containing file systems.\n" "\n" msgstr "" #: src/sync.c:72 msgid " -d, --data sync only file data, no unneeded metadata\n" msgstr "" #: src/sync.c:75 msgid "" " -f, --file-system sync the file systems that contain the files\n" msgstr "" #: src/sync.c:113 #, c-format msgid "error opening %s" msgstr "" #: src/sync.c:123 #, c-format msgid "couldn't reset non-blocking mode %s" msgstr "" #: src/sync.c:154 #, c-format msgid "error syncing %s" msgstr "" #: src/sync.c:212 #, c-format msgid "cannot specify both --data and --file-system" msgstr "" #: src/sync.c:216 #, c-format msgid "--data needs at least one argument" msgstr "" #: src/system.h:343 #, c-format msgid "" "\n" "NOTE: your shell may have its own version of %s, which usually supersedes\n" "the version described here. Please refer to your shell's documentation\n" "for details about the options it supports.\n" msgstr "" #: src/system.h:349 msgid " --help display this help and exit\n" msgstr "" #: src/system.h:351 msgid " --version output version information and exit\n" msgstr "" #: src/base64.c:76 src/cat.c:110 src/fmt.c:295 src/shuf.c:70 src/sum.c:70 msgid "" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/system.h:544 msgid "" "\n" "Mandatory arguments to long options are mandatory for short options too.\n" msgstr "" #: src/system.h:595 msgid "" "\n" "The SIZE argument is an integer and optional unit (example: 10K is " "10*1024).\n" "Units are K,M,G,T,P,E,Z,Y (powers of 1024) or KB,MB,... (powers of 1000).\n" msgstr "" #: src/system.h:561 #, c-format msgid "" "\n" "Display values are in units of the first available SIZE from --block-size,\n" "and the %s_BLOCK_SIZE, BLOCK_SIZE and BLOCKSIZE environment variables.\n" "Otherwise, units default to 1024 bytes (or 512 if POSIXLY_CORRECT is set).\n" msgstr "" #: src/system.h:633 #, c-format msgid "" "\n" "%s online help: <%s>\n" msgstr "" #. TRANSLATORS: Replace LANG_CODE in this URL with your language code #. to form one of #. the URLs at http://translationproject.org/team/. Otherwise, replace #. the entire URL with your translation team's email address. #: src/system.h:585 #, c-format msgid "Report %s translation bugs to \n" msgstr "" #: src/system.h:647 #, c-format msgid "Full documentation at: <%s%s>\n" msgstr "" #: src/system.h:649 #, c-format msgid "or available locally via: info '(coreutils) %s%s'\n" msgstr "" #: src/system.h:596 #, c-format msgid "Try '%s --help' for more information.\n" msgstr "" #: src/system.h:628 #, c-format msgid "" "WARNING: Circular directory structure.\n" "This almost certainly means that you have a corrupted file system.\n" "NOTIFY YOUR SYSTEM MANAGER.\n" "The following directory is part of the cycle:\n" " %s\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/tac.c:58 msgid "Jay Lepreau" msgstr "" #: src/tac.c:135 msgid "Write each FILE to standard output, last line first.\n" msgstr "" #: src/tac.c:144 msgid "" " -b, --before attach the separator before instead of after\n" " -r, --regex interpret the separator as a regular expression\n" " -s, --separator=STRING use STRING as the separator instead of newline\n" msgstr "" #: src/tac.c:234 src/tac.c:335 #, c-format msgid "%s: seek failed" msgstr "" #: src/tac.c:263 #, c-format msgid "record too large" msgstr "" #: src/tac.c:450 #, c-format msgid "failed to create temporary file in %s" msgstr "" #: src/tac.c:458 #, c-format msgid "failed to open %s for writing" msgstr "" #: src/tac.c:475 #, c-format msgid "failed to rewind stream for %s" msgstr "" #: src/tac.c:511 src/tac.c:518 #, c-format msgid "%s: write error" msgstr "" #: src/tac.c:571 #, c-format msgid "failed to open %s for reading" msgstr "" #: src/tac.c:629 #, c-format msgid "separator cannot be empty" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/tail.c:71 msgid "Ian Lance Taylor" msgstr "" #: src/tail.c:261 #, c-format msgid "" "Print the last %d lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" msgstr "" #: src/tail.c:269 msgid "" " -c, --bytes=[+]NUM output the last NUM bytes; or use -c +NUM to\n" " output starting with byte NUM of each file\n" msgstr "" #: src/tail.c:273 msgid "" " -f, --follow[={name|descriptor}]\n" " output appended data as the file grows;\n" " an absent option argument means 'descriptor'\n" " -F same as --follow=name --retry\n" msgstr "" #: src/tail.c:279 #, c-format msgid "" " -n, --lines=[+]NUM output the last NUM lines, instead of the last " "%d;\n" " or use -n +NUM to output starting with line " "NUM\n" " --max-unchanged-stats=N\n" " with --follow=name, reopen a FILE which has not\n" " changed size after N (default %d) iterations\n" " to see if it has been unlinked or renamed\n" " (this is the usual case of rotated log files);\n" " with inotify, this option is rarely useful\n" msgstr "" #: src/tail.c:292 msgid "" " --pid=PID with -f, terminate after process ID, PID dies\n" " -q, --quiet, --silent never output headers giving file names\n" " --retry keep trying to open a file if it is inaccessible\n" msgstr "" #: src/tail.c:297 msgid "" " -s, --sleep-interval=N with -f, sleep for approximately N seconds\n" " (default 1.0) between iterations;\n" " with inotify and --pid=P, check process P at\n" " least once every N seconds\n" " -v, --verbose always output headers giving file names\n" msgstr "" #: src/tail.c:309 msgid "" "\n" "NUM may have a multiplier suffix:\n" "b 512, kB 1000, K 1024, MB 1000*1000, M 1024*1024,\n" "GB 1000*1000*1000, G 1024*1024*1024, and so on for T, P, E, Z, Y.\n" "\n" msgstr "" #: src/tail.c:319 msgid "" "With --follow (-f), tail defaults to following the file descriptor, which\n" "means that even if a tail'ed file is renamed, tail will continue to track\n" "its end. This default behavior is not desirable when you really want to\n" "track the actual name of the file, not the file descriptor (e.g., log\n" "rotation). Use --follow=name in that case. That causes tail to track the\n" "named file in a way that accommodates renaming, removal and creation.\n" msgstr "" #: src/tail.c:378 #, c-format msgid "closing %s (fd=%d)" msgstr "" #: src/tail.c:457 #, c-format msgid "%s: cannot seek to end-relative offset %s" msgstr "" #: src/tail.c:894 #, c-format msgid "cannot determine location of %s. reverting to polling" msgstr "" #: src/tail.c:959 #, c-format msgid "%s has been replaced with a symbolic link. giving up on this name" msgstr "" #: src/tail.c:963 #, c-format msgid "%s has become inaccessible" msgstr "" #: src/tail.c:980 #, c-format msgid "%s has been replaced with an untailable file; giving up on this name" msgstr "" #: src/tail.c:989 #, c-format msgid "%s has been replaced with a remote file. giving up on this name" msgstr "" #: src/tail.c:1010 #, c-format msgid "%s has become accessible" msgstr "" #: src/tail.c:1031 #, c-format msgid "%s has appeared; following new file" msgstr "" #: src/tail.c:1041 #, c-format msgid "%s has been replaced; following new file" msgstr "" #: src/tail.c:1130 #, c-format msgid "%s: cannot change nonblocking mode" msgstr "" #: src/tail.c:1172 src/tail.c:1287 #, c-format msgid "%s: file truncated" msgstr "" #: src/tail.c:1196 src/tail.c:1442 #, c-format msgid "no files remaining" msgstr "" #: src/tail.c:1369 #, c-format msgid "cannot watch parent directory of %s" msgstr "" #: src/tail.c:1372 src/tail.c:1387 #, c-format msgid "inotify resources exhausted" msgstr "" #: src/tail.c:1390 src/tail.c:1519 #, c-format msgid "cannot watch %s" msgstr "" #: src/tail.c:1527 #, c-format msgid "%s was replaced" msgstr "" #: src/tail.c:1473 #, c-format msgid "error monitoring inotify event" msgstr "" #: src/tail.c:1493 #, c-format msgid "error reading inotify event" msgstr "" #: src/tail.c:1786 #, c-format msgid "%s: cannot follow end of this type of file; giving up on this name" msgstr "" #: src/tail.c:2115 msgid "invalid maximum number of unchanged stats between opens" msgstr "" #: src/tail.c:2123 msgid "invalid PID" msgstr "" #: src/tail.c:2139 #, c-format msgid "invalid number of seconds: %s" msgstr "" #: src/tail.c:2026 #, c-format msgid "option used in invalid context -- %c" msgstr "" #: src/tail.c:2171 #, c-format msgid "warning: --retry ignored; --retry is useful only when following" msgstr "" #: src/tail.c:2175 #, c-format msgid "warning: --retry only effective for the initial open" msgstr "" #: src/tail.c:2038 #, c-format msgid "warning: PID ignored; --pid=PID is useful only when following" msgstr "" #: src/tail.c:2041 #, c-format msgid "warning: --pid=PID is not supported on this system" msgstr "" #: src/tail.c:2142 #, c-format msgid "cannot follow %s by name" msgstr "" #: src/tail.c:2148 #, c-format msgid "warning: following standard input indefinitely is ineffective" msgstr "" #: src/tail.c:2209 #, c-format msgid "inotify cannot be used, reverting to polling" msgstr "" #: src/tee.c:63 msgid "" "Copy standard input to each FILE, and also to standard output.\n" "\n" " -a, --append append to the given FILEs, do not overwrite\n" " -i, --ignore-interrupts ignore interrupt signals\n" msgstr "" #: src/tee.c:93 msgid "" " -p diagnose errors writing to non pipes\n" " --output-error[=MODE] set behavior on write error. See MODE below\n" msgstr "" #: src/tee.c:99 msgid "" "\n" "MODE determines behavior with write errors on the outputs:\n" " 'warn' diagnose errors writing to any output\n" " 'warn-nopipe' diagnose errors writing to any output not a pipe\n" " 'exit' exit on error writing to any output\n" " 'exit-nopipe' exit on error writing to any output not a pipe\n" "The default MODE for the -p option is 'warn-nopipe'.\n" "The default operation when --output-error is not specified, is to\n" "exit immediately on error writing to a pipe, and diagnose errors\n" "writing to non pipe outputs.\n" msgstr "" #: src/test.c:123 #, c-format msgid "missing argument after %s" msgstr "" #: src/test.c:159 #, c-format msgid "invalid integer %s" msgstr "" #: src/test.c:245 #, c-format msgid "%s expected" msgstr "" #: src/test.c:248 #, c-format msgid "%s expected, found %s" msgstr "" #: src/test.c:260 src/test.c:618 #, c-format msgid "%s: unary operator expected" msgstr "" #: src/test.c:329 msgid "-nt does not accept -l" msgstr "" #: src/test.c:342 msgid "-ef does not accept -l" msgstr "" #: src/test.c:358 msgid "-ot does not accept -l" msgstr "" #: src/test.c:372 #, c-format msgid "%s: unknown binary operator" msgstr "" #: src/test.c:646 #, c-format msgid "%s: binary operator expected" msgstr "" #: src/test.c:704 msgid "" "Usage: test EXPRESSION\n" " or: test\n" " or: [ EXPRESSION ]\n" " or: [ ]\n" " or: [ OPTION\n" msgstr "" #: src/test.c:711 msgid "" "Exit with the status determined by EXPRESSION.\n" "\n" msgstr "" #: src/test.c:717 msgid "" "\n" "An omitted EXPRESSION defaults to false. Otherwise,\n" "EXPRESSION is true or false and sets exit status. It is one of:\n" msgstr "" #: src/test.c:722 msgid "" "\n" " ( EXPRESSION ) EXPRESSION is true\n" " ! EXPRESSION EXPRESSION is false\n" " EXPRESSION1 -a EXPRESSION2 both EXPRESSION1 and EXPRESSION2 are true\n" " EXPRESSION1 -o EXPRESSION2 either EXPRESSION1 or EXPRESSION2 is true\n" msgstr "" #: src/test.c:729 msgid "" "\n" " -n STRING the length of STRING is nonzero\n" " STRING equivalent to -n STRING\n" " -z STRING the length of STRING is zero\n" " STRING1 = STRING2 the strings are equal\n" " STRING1 != STRING2 the strings are not equal\n" msgstr "" #: src/test.c:737 msgid "" "\n" " INTEGER1 -eq INTEGER2 INTEGER1 is equal to INTEGER2\n" " INTEGER1 -ge INTEGER2 INTEGER1 is greater than or equal to INTEGER2\n" " INTEGER1 -gt INTEGER2 INTEGER1 is greater than INTEGER2\n" " INTEGER1 -le INTEGER2 INTEGER1 is less than or equal to INTEGER2\n" " INTEGER1 -lt INTEGER2 INTEGER1 is less than INTEGER2\n" " INTEGER1 -ne INTEGER2 INTEGER1 is not equal to INTEGER2\n" msgstr "" #: src/test.c:746 msgid "" "\n" " FILE1 -ef FILE2 FILE1 and FILE2 have the same device and inode numbers\n" " FILE1 -nt FILE2 FILE1 is newer (modification date) than FILE2\n" " FILE1 -ot FILE2 FILE1 is older than FILE2\n" msgstr "" #: src/test.c:752 msgid "" "\n" " -b FILE FILE exists and is block special\n" " -c FILE FILE exists and is character special\n" " -d FILE FILE exists and is a directory\n" " -e FILE FILE exists\n" msgstr "" #: src/test.c:759 msgid "" " -f FILE FILE exists and is a regular file\n" " -g FILE FILE exists and is set-group-ID\n" " -G FILE FILE exists and is owned by the effective group ID\n" " -h FILE FILE exists and is a symbolic link (same as -L)\n" " -k FILE FILE exists and has its sticky bit set\n" msgstr "" #: src/test.c:766 msgid "" " -L FILE FILE exists and is a symbolic link (same as -h)\n" " -O FILE FILE exists and is owned by the effective user ID\n" " -p FILE FILE exists and is a named pipe\n" " -r FILE FILE exists and read permission is granted\n" " -s FILE FILE exists and has a size greater than zero\n" msgstr "" #: src/test.c:773 msgid "" " -S FILE FILE exists and is a socket\n" " -t FD file descriptor FD is opened on a terminal\n" " -u FILE FILE exists and its set-user-ID bit is set\n" " -w FILE FILE exists and write permission is granted\n" " -x FILE FILE exists and execute (or search) permission is granted\n" msgstr "" #: src/test.c:780 msgid "" "\n" "Except for -h and -L, all FILE-related tests dereference symbolic links.\n" "Beware that parentheses need to be escaped (e.g., by backslashes) for " "shells.\n" "INTEGER may also be -l STRING, which evaluates to the length of STRING.\n" msgstr "" #: src/test.c:786 msgid "" "\n" "NOTE: [ honors the --help and --version options, but test does not.\n" "test treats each of those as it treats any other nonempty STRING.\n" msgstr "" #: src/test.c:791 msgid "test and/or [" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/test.c:803 msgid "Kevin Braunsdorf" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/test.c:804 msgid "Matthew Bradburn" msgstr "" #: src/test.c:863 #, c-format msgid "missing %s" msgstr "" #: src/test.c:872 #, c-format msgid "extra argument %s" msgstr "" #: src/timeout.c:112 #, c-format msgid "warning: sigprocmask" msgstr "" #: src/timeout.c:145 #, c-format msgid "warning: timer_settime" msgstr "" #: src/timeout.c:150 #, c-format msgid "warning: timer_create" msgstr "" #: src/timeout.c:225 #, c-format msgid "" "Usage: %s [OPTION] DURATION COMMAND [ARG]...\n" " or: %s [OPTION]\n" msgstr "" #: src/timeout.c:229 msgid "Start COMMAND, and kill it if still running after DURATION.\n" msgstr "" #: src/timeout.c:240 msgid "" " --preserve-status\n" " exit with the same status as COMMAND, even when the\n" " command times out\n" " --foreground\n" " when not running timeout directly from a shell prompt,\n" " allow COMMAND to read from the TTY and get TTY signals;\n" " in this mode, children of COMMAND will not be timed out\n" " -k, --kill-after=DURATION\n" " also send a KILL signal if COMMAND is still running\n" " this long after the initial signal was sent\n" " -s, --signal=SIGNAL\n" " specify the signal to be sent on timeout;\n" " SIGNAL may be a name like 'HUP' or a number;\n" " see 'kill -l' for a list of signals\n" msgstr "" #: src/timeout.c:254 msgid "" "\n" "DURATION is a floating point number with an optional suffix:\n" "'s' for seconds (the default), 'm' for minutes, 'h' for hours or 'd' for " "days.\n" msgstr "" #: src/timeout.c:259 msgid "" "\n" "If the command times out, and --preserve-status is not set, then exit with\n" "status 124. Otherwise, exit with the status of COMMAND. If no signal\n" "is specified, send the TERM signal upon timeout. The TERM signal kills\n" "any process that does not block or catch that signal. It may be necessary\n" "to use the KILL (9) signal, since this signal cannot be caught, in which\n" "case the exit status is 128+9 rather than 124.\n" msgstr "" #: src/timeout.c:363 #, c-format msgid "warning: disabling core dumps failed" msgstr "" #: src/timeout.c:471 #, c-format msgid "error waiting for command" msgstr "" #: src/timeout.c:482 #, c-format msgid "the monitored command dumped core" msgstr "" #: src/timeout.c:497 #, c-format msgid "unknown status from command (%d)" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/touch.c:43 msgid "Jim Kingdon" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/touch.c:45 msgid "Randy Smith" msgstr "" #: src/touch.c:115 src/touch.c:309 #, c-format msgid "invalid date format %s" msgstr "" #: src/touch.c:191 #, c-format msgid "cannot touch %s" msgstr "" #: src/touch.c:197 #, c-format msgid "setting times of %s" msgstr "" #: src/touch.c:213 msgid "" "Update the access and modification times of each FILE to the current time.\n" "\n" "A FILE argument that does not exist is created empty, unless -c or -h\n" "is supplied.\n" "\n" "A FILE argument string of - is handled specially and causes touch to\n" "change the times of the file associated with standard output.\n" msgstr "" #: src/touch.c:225 msgid "" " -a change only the access time\n" " -c, --no-create do not create any files\n" " -d, --date=STRING parse STRING and use it instead of current time\n" " -f (ignored)\n" msgstr "" #: src/touch.c:231 msgid "" " -h, --no-dereference affect each symbolic link instead of any " "referenced\n" " file (useful only on systems that can change the\n" " timestamps of a symlink)\n" " -m change only the modification time\n" msgstr "" #: src/touch.c:237 msgid "" " -r, --reference=FILE use this file's times instead of current time\n" " -t STAMP use [[CC]YY]MMDDhhmm[.ss] instead of current time\n" " --time=WORD change the specified time:\n" " WORD is access, atime, or use: equivalent to -a\n" " WORD is modify or mtime: equivalent to -m\n" msgstr "" #: src/touch.c:246 msgid "" "\n" "Note that the -d and -t options accept different time-date formats.\n" msgstr "" #: src/touch.c:335 #, c-format msgid "cannot specify times from more than one source" msgstr "" #: src/touch.c:409 #, c-format msgid "" "warning: 'touch %s' is obsolete; use 'touch -t %04ld%02d%02d%02d%02d.%02d'" msgstr "" #: src/tr.c:286 #, c-format msgid "Usage: %s [OPTION]... SET1 [SET2]\n" msgstr "" #: src/tr.c:290 msgid "" "Translate, squeeze, and/or delete characters from standard input,\n" "writing to standard output.\n" "\n" " -c, -C, --complement use the complement of SET1\n" " -d, --delete delete characters in SET1, do not translate\n" " -s, --squeeze-repeats replace each sequence of a repeated character\n" " that is listed in the last specified SET,\n" " with a single occurrence of that character\n" " -t, --truncate-set1 first truncate SET1 to length of SET2\n" msgstr "" #: src/tr.c:303 msgid "" "\n" "SETs are specified as strings of characters. Most represent themselves.\n" "Interpreted sequences are:\n" "\n" " \\NNN character with octal value NNN (1 to 3 octal digits)\n" " \\\\ backslash\n" " \\a audible BEL\n" " \\b backspace\n" " \\f form feed\n" " \\n new line\n" " \\r return\n" " \\t horizontal tab\n" msgstr "" #: src/tr.c:317 msgid "" " \\v vertical tab\n" " CHAR1-CHAR2 all characters from CHAR1 to CHAR2 in ascending order\n" " [CHAR*] in SET2, copies of CHAR until length of SET1\n" " [CHAR*REPEAT] REPEAT copies of CHAR, REPEAT octal if starting with 0\n" " [:alnum:] all letters and digits\n" " [:alpha:] all letters\n" " [:blank:] all horizontal whitespace\n" " [:cntrl:] all control characters\n" " [:digit:] all digits\n" msgstr "" #: src/tr.c:328 msgid "" " [:graph:] all printable characters, not including space\n" " [:lower:] all lower case letters\n" " [:print:] all printable characters, including space\n" " [:punct:] all punctuation characters\n" " [:space:] all horizontal or vertical whitespace\n" " [:upper:] all upper case letters\n" " [:xdigit:] all hexadecimal digits\n" " [=CHAR=] all characters which are equivalent to CHAR\n" msgstr "" #: src/tr.c:338 msgid "" "\n" "Translation occurs if -d is not given and both SET1 and SET2 appear.\n" "-t may be used only when translating. SET2 is extended to length of\n" "SET1 by repeating its last character as necessary. Excess characters\n" "of SET2 are ignored. Only [:lower:] and [:upper:] are guaranteed to\n" "expand in ascending order; used in SET2 while translating, they may\n" "only be used in pairs to specify case conversion. -s uses the last\n" "specified SET, and occurs after translation or deletion.\n" msgstr "" #: src/tr.c:509 #, c-format msgid "" "warning: the ambiguous octal escape \\%c%c%c is being\n" "\tinterpreted as the 2-byte sequence \\0%c%c, %c" msgstr "" #: src/tr.c:518 #, c-format msgid "warning: an unescaped backslash at end of string is not portable" msgstr "" #: src/tr.c:673 #, c-format msgid "range-endpoints of '%s-%s' are in reverse collating sequence order" msgstr "" #: src/tr.c:829 #, c-format msgid "invalid repeat count %s in [c*n] construct" msgstr "" #: src/tr.c:910 #, c-format msgid "missing character class name '[::]'" msgstr "" #: src/tr.c:913 #, c-format msgid "missing equivalence class character '[==]'" msgstr "" #: src/tr.c:928 #, c-format msgid "invalid character class %s" msgstr "" #: src/tr.c:947 #, c-format msgid "%s: equivalence class operand must be a single character" msgstr "" #: src/tr.c:1229 #, c-format msgid "misaligned [:upper:] and/or [:lower:] construct" msgstr "" #: src/tr.c:1335 #, c-format msgid "too many characters in set" msgstr "" #: src/tr.c:1420 #, c-format msgid "" "when translating with string1 longer than string2,\n" "the latter string must not end with a character class" msgstr "" #: src/tr.c:1480 #, c-format msgid "the [c*] repeat construct may not appear in string1" msgstr "" #: src/tr.c:1490 #, c-format msgid "only one [c*] repeat construct may appear in string2" msgstr "" #: src/tr.c:1498 #, c-format msgid "[=c=] expressions may not appear in string2 when translating" msgstr "" #: src/tr.c:1505 #, c-format msgid "" "when translating, the only character classes that may appear in\n" "string2 are 'upper' and 'lower'" msgstr "" #: src/tr.c:1520 #, c-format msgid "when not truncating set1, string2 must be non-empty" msgstr "" #: src/tr.c:1529 #, c-format msgid "" "when translating with complemented character classes,\n" "string2 must map all characters in the domain to one" msgstr "" #: src/tr.c:1538 #, c-format msgid "the [c*] construct may appear in string2 only when translating" msgstr "" #: src/tr.c:1788 msgid "Two strings must be given when both deleting and squeezing repeats." msgstr "" #: src/tr.c:1790 msgid "Two strings must be given when translating." msgstr "" #: src/tr.c:1800 msgid "Only one string may be given when deleting without squeezing repeats." msgstr "" #: src/true.c:38 #, c-format msgid "" "Usage: %s [ignored command line arguments]\n" " or: %s OPTION\n" msgstr "" #: src/true.c:45 msgid "Exit with a status code indicating success." msgstr "" #: src/true.c:46 msgid "Exit with a status code indicating failure." msgstr "" #: src/truncate.c:96 #, c-format msgid "Usage: %s OPTION... FILE...\n" msgstr "" #: src/truncate.c:97 msgid "" "Shrink or extend the size of each FILE to the specified size\n" "\n" "A FILE argument that does not exist is created.\n" "\n" "If a FILE is larger than the specified size, the extra data is lost.\n" "If a FILE is shorter, it is extended and the extended part (hole)\n" "reads as zero bytes.\n" msgstr "" #: src/truncate.c:109 msgid " -c, --no-create do not create any files\n" msgstr "" #: src/truncate.c:112 msgid "" " -o, --io-blocks treat SIZE as number of IO blocks instead of bytes\n" msgstr "" #: src/truncate.c:88 msgid "" " -r, --reference=RFILE base size on RFILE\n" " -s, --size=SIZE set or adjust the file size by SIZE bytes\n" msgstr "" #: src/truncate.c:121 msgid "" "\n" "SIZE may also be prefixed by one of the following modifying characters:\n" "'+' extend by, '-' reduce by, '<' at most, '>' at least,\n" "'/' round down to multiple of, '%' round up to multiple of.\n" msgstr "" #: src/truncate.c:149 #, c-format msgid "overflow in % * % byte blocks for file %s" msgstr "" #: src/truncate.c:173 #, c-format msgid "%s has unusable, apparently negative size" msgstr "" #: src/truncate.c:183 src/truncate.c:384 #, c-format msgid "cannot get the size of %s" msgstr "" #: src/truncate.c:205 #, c-format msgid "overflow rounding up size of file %s" msgstr "" #: src/truncate.c:215 #, c-format msgid "overflow extending size of file %s" msgstr "" #: src/truncate.c:230 #, c-format msgid "failed to truncate %s at % bytes" msgstr "" #: src/truncate.c:303 #, c-format msgid "multiple relative modifiers specified" msgstr "" #: src/truncate.c:285 msgid "Invalid number" msgstr "" #: src/truncate.c:333 #, c-format msgid "you must specify either %s or %s" msgstr "" #: src/truncate.c:340 #, c-format msgid "you must specify a relative %s with %s" msgstr "" #: src/truncate.c:347 #, c-format msgid "%s was specified but %s was not" msgstr "" #: src/truncate.c:404 #, c-format msgid "cannot open %s for writing" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/tsort.c:40 msgid "Mark Kettenis" msgstr "" #: src/tsort.c:82 #, c-format msgid "" "Usage: %s [OPTION] [FILE]\n" "Write totally ordered list consistent with the partial ordering in FILE.\n" msgstr "" #: src/uptime.c:210 #, c-format msgid "\n" msgstr "" #: src/tsort.c:472 #, c-format msgid "%s: input contains an odd number of tokens" msgstr "" #: src/tsort.c:518 #, c-format msgid "%s: input contains a loop:" msgstr "" #: src/tty.c:65 msgid "" "Print the file name of the terminal connected to standard input.\n" "\n" " -s, --silent, --quiet print nothing, only return an exit status\n" msgstr "" #: src/tty.c:120 msgid "not a tty" msgstr "" #: src/uname.c:124 msgid "" "Print certain system information. With no OPTION, same as -s.\n" "\n" " -a, --all print all information, in the following order,\n" " except omit -p and -i if unknown:\n" " -s, --kernel-name print the kernel name\n" " -n, --nodename print the network node hostname\n" " -r, --kernel-release print the kernel release\n" msgstr "" #: src/uname.c:133 msgid "" " -v, --kernel-version print the kernel version\n" " -m, --machine print the machine hardware name\n" " -p, --processor print the processor type (non-portable)\n" " -i, --hardware-platform print the hardware platform (non-portable)\n" " -o, --operating-system print the operating system\n" msgstr "" #: src/uname.c:143 msgid "" "Print machine architecture.\n" "\n" msgstr "" #: src/uname.c:286 #, c-format msgid "cannot get system name" msgstr "" #: src/unexpand.c:117 msgid "Convert blanks in each FILE to tabs, writing to standard output.\n" msgstr "" #: src/unexpand.c:124 msgid "" " -a, --all convert all blanks, instead of just initial blanks\n" " --first-only convert only leading sequences of blanks (overrides -a)\n" " -t, --tabs=N have tabs N characters apart instead of 8 (enables -a)\n" " -t, --tabs=LIST use comma separated LIST of tab positions (enables -a)\n" msgstr "" #: src/unexpand.c:152 #, c-format msgid "tabs are too far apart" msgstr "" #: src/unexpand.c:504 #, c-format msgid "tab stop value is too large" msgstr "" #: src/uniq.c:134 #, c-format msgid "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" #: src/uniq.c:138 msgid "" "Filter adjacent matching lines from INPUT (or standard input),\n" "writing to OUTPUT (or standard output).\n" "\n" "With no options, matching lines are merged to the first occurrence.\n" msgstr "" #: src/uniq.c:183 msgid "" " -c, --count prefix lines by the number of occurrences\n" " -d, --repeated only print duplicate lines, one for each group\n" msgstr "" #: src/uniq.c:187 msgid "" " -D print all duplicate lines\n" " --all-repeated[=METHOD] like -D, but allow separating groups\n" " with an empty line;\n" " METHOD={none(default),prepend,separate}\n" msgstr "" #: src/uniq.c:193 msgid " -f, --skip-fields=N avoid comparing the first N fields\n" msgstr "" #: src/uniq.c:196 msgid "" " --group[=METHOD] show all items, separating groups with an empty " "line;\n" " METHOD={separate(default),prepend,append,both}\n" msgstr "" #: src/uniq.c:200 msgid "" " -i, --ignore-case ignore differences in case when comparing\n" " -s, --skip-chars=N avoid comparing the first N characters\n" " -u, --unique only print unique lines\n" msgstr "" #: src/uniq.c:161 msgid " -w, --check-chars=N compare no more than N characters in lines\n" msgstr "" #: src/uniq.c:166 msgid "" "\n" "A field is a run of blanks (usually spaces and/or TABs), then non-blank\n" "characters. Fields are skipped before chars.\n" msgstr "" #: src/uniq.c:171 msgid "" "\n" "Note: 'uniq' does not detect repeated lines unless they are adjacent.\n" "You may want to sort the input first, or use 'sort -u' without 'uniq'.\n" "Also, comparisons honor the rules specified by 'LC_COLLATE'.\n" msgstr "" #: src/uniq.c:358 #, c-format msgid "too many repeated lines" msgstr "" #: src/uniq.c:521 msgid "invalid number of fields to skip" msgstr "" #: src/uniq.c:530 msgid "invalid number of bytes to skip" msgstr "" #: src/uniq.c:539 msgid "invalid number of bytes to compare" msgstr "" #: src/uniq.c:646 #, c-format msgid "--group is mutually exclusive with -c/-d/-D/-u" msgstr "" #: src/uniq.c:653 #, c-format msgid "grouping and printing repeat counts is meaningless" msgstr "" #: src/uniq.c:558 #, c-format msgid "printing all duplicated lines and repeat counts is meaningless" msgstr "" #: src/unlink.c:45 #, c-format msgid "" "Usage: %s FILE\n" " or: %s OPTION\n" msgstr "" #: src/unlink.c:48 msgid "" "Call the unlink function to remove the specified FILE.\n" "\n" msgstr "" #: src/uptime.c:125 #, c-format msgid "couldn't get boot time" msgstr "" #. TRANSLATORS: This prints the current clock time. #: src/uptime.c:136 msgid " %H:%M%P " msgstr "" #: src/uptime.c:138 #, c-format msgid " ??:???? " msgstr "" #: src/uptime.c:140 #, c-format msgid "up ???? days ??:??, " msgstr "" #: src/uptime.c:144 #, c-format msgid "up %ld day %2d:%02d, " msgid_plural "up %ld days %2d:%02d, " msgstr[0] "" msgstr[1] "" #: src/uptime.c:149 #, c-format msgid "up %2d:%02d, " msgstr "" #: src/uptime.c:151 #, c-format msgid "%lu user" msgid_plural "%lu users" msgstr[0] "" msgstr[1] "" #: src/uptime.c:161 #, c-format msgid ", load average: %.2f" msgstr "" #: src/uptime.c:197 #, c-format msgid "" "Print the current time, the length of time the system has been up,\n" "the number of users on the system, and the average number of jobs\n" "in the run queue over the last 1, 5 and 15 minutes." msgstr "" #: src/uptime.c:206 #, c-format msgid "" " Processes in\n" "an uninterruptible sleep state also contribute to the load average.\n" msgstr "" #: src/uptime.c:212 #, c-format msgid "" "If FILE is not specified, use %s. %s as FILE is common.\n" "\n" msgstr "" #: src/users.c:106 #, c-format msgid "" "Output who is currently logged in according to FILE.\n" "If FILE is not specified, use %s. %s as FILE is common.\n" "\n" msgstr "" #: src/wc.c:116 msgid "" "Print newline, word, and byte counts for each FILE, and a total line if\n" "more than one FILE is specified. A word is a non-zero-length sequence of\n" "characters delimited by white space.\n" msgstr "" #: src/wc.c:124 msgid "" "\n" "The options below may be used to select which counts are printed, always in\n" "the following order: newline, word, character, byte, maximum line length.\n" " -c, --bytes print the byte counts\n" " -m, --chars print the character counts\n" " -l, --lines print the newline counts\n" msgstr "" #: src/wc.c:132 msgid "" " --files0-from=F read input from the files specified by\n" " NUL-terminated names in file F;\n" " If F is - then read names from standard input\n" " -L, --max-line-length print the maximum display width\n" " -w, --words print the word counts\n" msgstr "" #: src/who.c:210 msgid " old " msgstr "" #: src/who.c:440 msgid "system boot" msgstr "" #: src/who.c:447 src/who.c:449 msgid "id=" msgstr "" #: src/who.c:462 src/who.c:467 msgid "term=" msgstr "" #: src/who.c:464 src/who.c:468 msgid "exit=" msgstr "" #: src/who.c:485 msgid "LOGIN" msgstr "" #: src/who.c:505 msgid "clock change" msgstr "" #: src/who.c:517 src/who.c:518 msgid "run-level" msgstr "" #: src/who.c:521 src/who.c:522 msgid "last=" msgstr "" #: src/who.c:553 #, c-format msgid "" "\n" "# users=%lu\n" msgstr "" #: src/who.c:559 msgid "NAME" msgstr "" #: src/who.c:559 msgid "LINE" msgstr "" #: src/who.c:559 msgid "TIME" msgstr "" #: src/who.c:559 msgid "IDLE" msgstr "" #: src/who.c:560 msgid "PID" msgstr "" #: src/who.c:560 msgid "COMMENT" msgstr "" #: src/who.c:560 msgid "EXIT" msgstr "" #: src/who.c:640 #, c-format msgid "Usage: %s [OPTION]... [ FILE | ARG1 ARG2 ]\n" msgstr "" #: src/who.c:641 msgid "Print information about users who are currently logged in.\n" msgstr "" #: src/who.c:644 msgid "" "\n" " -a, --all same as -b -d --login -p -r -t -T -u\n" " -b, --boot time of last system boot\n" " -d, --dead print dead processes\n" " -H, --heading print line of column headings\n" msgstr "" #: src/who.c:651 msgid " -l, --login print system login processes\n" msgstr "" #: src/who.c:654 msgid "" " --lookup attempt to canonicalize hostnames via DNS\n" " -m only hostname and user associated with stdin\n" " -p, --process print active processes spawned by init\n" msgstr "" #: src/who.c:659 msgid "" " -q, --count all login names and number of users logged on\n" " -r, --runlevel print current runlevel\n" " -s, --short print only name, line, and time (default)\n" " -t, --time print last system clock change\n" msgstr "" #: src/who.c:665 msgid "" " -T, -w, --mesg add user's message status as +, - or ?\n" " -u, --users list users logged in\n" " --message same as -T\n" " --writable same as -T\n" msgstr "" #: src/who.c:673 #, c-format msgid "" "\n" "If FILE is not specified, use %s. %s as FILE is common.\n" "If ARG1 ARG2 given, -m presumed: 'am i' or 'mom likes' are usual.\n" msgstr "" #: src/whoami.c:45 msgid "" "Print the user name associated with the current effective user ID.\n" "Same as id -un.\n" "\n" msgstr "" #: src/whoami.c:87 #, c-format msgid "cannot find name for user ID %lu" msgstr "" #: src/yes.c:41 #, c-format msgid "" "Usage: %s [STRING]...\n" " or: %s OPTION\n" msgstr "" #: src/yes.c:47 msgid "" "Repeatedly output a line with all specified STRING(s), or 'y'.\n" "\n" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/language-selector.po0000644000000000000000000002605712734303741021376 0ustar # German, Low translation for language-selector # Copyright (c) 2009 Rosetta Contributors and Canonical Ltd 2009 # This file is distributed under the same license as the language-selector package. # FIRST AUTHOR , 2009. # msgid "" msgstr "" "Project-Id-Version: language-selector\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-05-26 22:49+0000\n" "PO-Revision-Date: 2010-09-07 03:00+0000\n" "Last-Translator: Arne Goetje \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2016-06-27 17:41+0000\n" "X-Generator: Launchpad (build 18115)\n" "Language: \n" #. Hack for Chinese langpack split #. Translators: please translate 'Chinese (simplified)' and 'Chinese (traditional)' so that they appear next to each other when sorted alphabetically. #: ../LanguageSelector/LocaleInfo.py:56 msgid "Chinese (simplified)" msgstr "Chinesisch (eenfach)" #. Translators: please translate 'Chinese (simplified)' and 'Chinese (traditional)' so that they appear next to each other when sorted alphabetically. #: ../LanguageSelector/LocaleInfo.py:58 msgid "Chinese (traditional)" msgstr "Chinesisch (traditschoonell)" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:233 msgid "No language information available" msgstr "Keene Sprakinformatschoonen verfögbar" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:234 msgid "" "The system does not have information about the available languages yet. Do " "you want to perform a network update to get them now? " msgstr "" "Das System hat keine Information über vorhandene Sprachen. Möchten Sie ein " "Update durchführen um diese zu erhalten? " #: ../LanguageSelector/gtk/GtkLanguageSelector.py:238 msgid "_Update" msgstr "_Opfrischen" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:322 #: ../LanguageSelector/gtk/GtkLanguageSelector.py:359 #: ../data/LanguageSelector.ui.h:21 msgid "Language" msgstr "Sprak" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:329 msgid "Installed" msgstr "Installert" #. print("%(INSTALL)d to install, %(REMOVE)d to remove" % (countInstall, countRemove)) #. Translators: %(INSTALL)d is parsed; either keep it exactly as is or remove it entirely, but don't translate "INSTALL". #: ../LanguageSelector/gtk/GtkLanguageSelector.py:397 #, python-format msgid "%(INSTALL)d to install" msgid_plural "%(INSTALL)d to install" msgstr[0] "%(INSTALL)d wird installiert" msgstr[1] "%(INSTALL)d wird installiert" #. Translators: %(REMOVE)d is parsed; either keep it exactly as is or remove it entirely, but don't translate "REMOVE". #: ../LanguageSelector/gtk/GtkLanguageSelector.py:399 #, python-format msgid "%(REMOVE)d to remove" msgid_plural "%(REMOVE)d to remove" msgstr[0] "%(REMOVE)d wird entfernt" msgstr[1] "%(REMOVE)d wird entfernt" #. Translators: this string will concatenate the "%n to install" and "%n to remove" strings, you can replace the comma if you need to. #: ../LanguageSelector/gtk/GtkLanguageSelector.py:408 #, python-format msgid "%s, %s" msgstr "%s, %s" #. find out about the other options #: ../LanguageSelector/gtk/GtkLanguageSelector.py:456 msgid "none" msgstr "" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:509 #: ../LanguageSelector/gtk/GtkLanguageSelector.py:718 msgid "Software database is broken" msgstr "Programmdatenbank is im dutt" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:510 #: ../LanguageSelector/gtk/GtkLanguageSelector.py:719 msgid "" "It is impossible to install or remove any software. Please use the package " "manager \"Synaptic\" or run \"sudo apt-get install -f\" in a terminal to fix " "this issue at first." msgstr "" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:551 msgid "Could not install the selected language support" msgstr "Konnte die gewählte Sprachhilfen nicht installieren" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:552 msgid "" "This is perhaps a bug of this application. Please file a bug report at " "https://bugs.launchpad.net/ubuntu/+source/language-selector/+filebug" msgstr "" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:576 #: ../LanguageSelector/gtk/GtkLanguageSelector.py:612 #: ../LanguageSelector/gtk/GtkLanguageSelector.py:616 msgid "Could not install the full language support" msgstr "Konnte nicht die vollständige Sprachunterstützung installieren" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:577 msgid "" "Usually this is related to an error in your software archive or software " "manager. Check your preferences in Software Sources (click the icon at the " "very right of the top bar and select \"System Settings... -> Software " "Sources\")." msgstr "" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:613 msgid "Failed to authorize to install packages." msgstr "" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:671 msgid "The language support is not installed completely" msgstr "Die Sprachunterstützung wurde nicht vollständig installiert" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:672 msgid "" "Some translations or writing aids available for your chosen languages are " "not installed yet. Do you want to install them now?" msgstr "" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:675 msgid "_Remind Me Later" msgstr "_Später erinnern" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:676 msgid "_Install" msgstr "_Installieren" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:679 msgid "Details" msgstr "Details" #: ../LanguageSelector/gtk/GtkLanguageSelector.py:943 #, python-format msgid "" "Failed to apply the '%s' format\n" "choice. The examples may show up if you\n" "close and re-open Language Support." msgstr "" #: ../data/LanguageSelector.ui.h:1 ../data/language-selector.desktop.in.h:1 msgid "Language Support" msgstr "Sprakunnerstütten" #: ../data/LanguageSelector.ui.h:2 msgid "" "Checking available language support\n" "\n" "The availability of translations or writing aids can differ between " "languages." msgstr "" #: ../data/LanguageSelector.ui.h:5 msgid "Installed Languages" msgstr "Installerte Spraken" #: ../data/LanguageSelector.ui.h:6 msgid "" "When a language is installed, individual users can choose it in their " "Language settings." msgstr "Wenn eene Sprak installert is" #: ../data/LanguageSelector.ui.h:7 msgid "Language for menus and windows:" msgstr "Sprak för Menüs un Finsters:" #: ../data/LanguageSelector.ui.h:8 msgid "" "This setting only affects the language your desktop and applications are " "displayed in. It does not set the system environment, like currency or date " "format settings. For that, use the settings in the Regional Formats tab.\n" "The order of the values displayed here decides which translations to use for " "your desktop. If translations for the first language are not available, the " "next one in this list will be tried. The last entry of this list is always " "\"English\".\n" "Every entry below \"English\" will be ignored." msgstr "" #: ../data/LanguageSelector.ui.h:11 msgid "" "Drag languages to arrange them in order of preference.\n" "Changes take effect next time you log in." msgstr "" #: ../data/LanguageSelector.ui.h:13 msgid "Apply System-Wide" msgstr "" #: ../data/LanguageSelector.ui.h:14 msgid "" "Use the same language choices for startup and the login " "screen." msgstr "" #: ../data/LanguageSelector.ui.h:15 msgid "Install / Remove Languages..." msgstr "Spraken installeren / löschen..." #: ../data/LanguageSelector.ui.h:16 msgid "Keyboard input method system:" msgstr "Knöppboordingavnmethodensystem:" #: ../data/LanguageSelector.ui.h:17 msgid "" "If you need to type in languages, which require more complex input methods " "than just a simple key to letter mapping, you may want to enable this " "function.\n" "For example, you will need this function for typing Chinese, Japanese, " "Korean or Vietnamese.\n" "The recommended value for Ubuntu is \"IBus\".\n" "If you want to use alternative input method systems, install the " "corresponding packages first and then choose the desired system here." msgstr "" #: ../data/LanguageSelector.ui.h:22 msgid "Display numbers, dates and currency amounts in the usual format for:" msgstr "" #: ../data/LanguageSelector.ui.h:23 msgid "" "This will set the system environment like shown below and will also affect " "the preferred paper format and other region specific settings.\n" "If you want to display the desktop in a different language than this, please " "select it in the \"Language\" tab.\n" "Hence you should set this to a sensible value for the region in which you " "are located." msgstr "" #: ../data/LanguageSelector.ui.h:26 msgid "Changes take effect next time you log in." msgstr "" #: ../data/LanguageSelector.ui.h:27 msgid "" "Use the same format choice for startup and the login screen." msgstr "" #: ../data/LanguageSelector.ui.h:28 msgid "Currency:" msgstr "Aktuell:" #: ../data/LanguageSelector.ui.h:29 msgid "Date:" msgstr "Dag:" #: ../data/LanguageSelector.ui.h:30 msgid "Number:" msgstr "Taal:" #: ../data/LanguageSelector.ui.h:31 msgid "Example" msgstr "Bispeel" #: ../data/LanguageSelector.ui.h:32 msgid "Regional Formats" msgstr "" #: ../data/language-selector.desktop.in.h:2 msgid "Configure multiple and native language support on your system" msgstr "" #. Name #: ../data/incomplete-language-support-gnome.note.in:5 msgid "Incomplete Language Support" msgstr "De Sprakunnerstütten is nich vollständig" #. Description #: ../data/incomplete-language-support-gnome.note.in:6 msgid "" "The language support files for your selected language seem to be incomplete. " "You can install the missing components by clicking on \"Run this action " "now\" and follow the instructions. An active internet connection is " "required. If you would like to do this at a later time, please use Language " "Support instead (click the icon at the very right of the top bar and select " "\"System Settings... -> Language Support\")." msgstr "" #. Name #: ../data/restart_session_required.note.in:5 msgid "Session Restart Required" msgstr "De Törn mutt nej startet werrn" #. Description #: ../data/restart_session_required.note.in:6 msgid "The new language settings will take effect once you have logged out." msgstr "" #: ../dbus_backend/com.ubuntu.languageselector.policy.in.h:1 msgid "Set system default language" msgstr "" #: ../dbus_backend/com.ubuntu.languageselector.policy.in.h:2 msgid "System policy prevented setting default language" msgstr "" #: ../gnome-language-selector:33 msgid "don't verify installed language support" msgstr "" #: ../gnome-language-selector:36 ../check-language-support:27 msgid "alternative datadir" msgstr "" #: ../check-language-support:24 msgid "target language code" msgstr "Täälsprakcode" #: ../check-language-support:28 msgid "check for the given package(s) only -- separate packagenames by comma" msgstr "" #: ../check-language-support:30 msgid "output all available language support packages for all languages" msgstr "" #: ../check-language-support:33 msgid "show installed packages as well as missing ones" msgstr "all installerte un fehlende Pakete opwiesen" language-pack-nds-base/data/nds/LC_MESSAGES/usbcreator.po0000644000000000000000000001543112734303741020140 0ustar # German, Low translation for usb-creator # Copyright (c) 2008 Rosetta Contributors and Canonical Ltd 2008 # This file is distributed under the same license as the usb-creator package. # FIRST AUTHOR , 2008. # msgid "" msgstr "" "Project-Id-Version: usb-creator\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-01-22 19:49+0000\n" "PO-Revision-Date: 2010-09-07 17:41+0000\n" "Last-Translator: tbds \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2016-06-27 18:35+0000\n" "X-Generator: Launchpad (build 18115)\n" #: .././gui/usbcreator-gtk.ui.h:1 msgid "Installation Failed" msgstr "Die Installation ist gescheitert" #: .././gui/usbcreator-gtk.ui.h:2 msgid "" "The installation failed. Please see ~/.cache/usb-creator.log for more " "details.\n" msgstr "" #: .././gui/usbcreator-gtk.ui.h:4 msgid "Installation Complete" msgstr "Installatschoon fertig" #: .././gui/usbcreator-gtk.ui.h:5 msgid "Test Disk" msgstr "" #: .././gui/usbcreator-gtk.ui.h:6 msgid "" "Installation is complete. You may now run Ubuntu on other computers by " "booting them with this drive inserted." msgstr "" #. #-#-#-#-# usbcreator.pot (PACKAGE VERSION) #-#-#-#-# #. set title of progress window (same as gtk frontend) #: .././gui/usbcreator-gtk.ui.h:7 .././usbcreator/frontends/kde/frontend.py:184 #: usbcreator/frontends/kde/frontend.py:184 msgid "Installing" msgstr "" #: .././gui/usbcreator-gtk.ui.h:8 .././usbcreator/frontends/kde/frontend.py:504 #: usbcreator/frontends/kde/frontend.py:504 msgid "Quit the installation?" msgstr "Installatschoon avbreken?" #: .././gui/usbcreator-gtk.ui.h:9 .././usbcreator/frontends/kde/frontend.py:505 #: usbcreator/frontends/kde/frontend.py:505 msgid "Do you really want to quit the installation now?" msgstr "Möchten Sie die Installation jetzt wirklich beenden?" #: .././gui/usbcreator-gtk.ui.h:10 msgid "Make Startup Disk" msgstr "Startdiskette erstellen" #: .././gui/usbcreator-gtk.ui.h:11 msgid "" "To try or install Ubuntu from a removable disk, it needs to be set up as a " "startup disk." msgstr "" #: .././gui/usbcreator-gtk.ui.h:12 msgid "Source disc image (.iso):" msgstr "" #: .././gui/usbcreator-gtk.ui.h:13 msgid "Other..." msgstr "Annere..." #: .././gui/usbcreator-gtk.ui.h:14 msgid "Disk to use:" msgstr "" #: .././gui/usbcreator-gtk.ui.h:15 msgid "Erase Disk" msgstr "" #: .././desktop/usb-creator-kde.desktop.in.h:1 #: .././desktop/usb-creator-gtk.desktop.in.h:1 msgid "Startup Disk Creator" msgstr "" #: .././desktop/usb-creator-kde.desktop.in.h:2 #: .././desktop/usb-creator-gtk.desktop.in.h:2 msgid "Create a startup disk using a CD or disc image" msgstr "" #: .././dbus/com.ubuntu.usbcreator.policy.in.h:1 msgid "Image the device" msgstr "" #: .././dbus/com.ubuntu.usbcreator.policy.in.h:2 msgid "System policy prevents writing a disk image to this device" msgstr "" #: .././dbus/com.ubuntu.usbcreator.policy.in.h:3 msgid "Mount a device" msgstr "Lööpwark inbinnen" #: .././dbus/com.ubuntu.usbcreator.policy.in.h:4 msgid "System policy prevents mounting" msgstr "" #: .././dbus/com.ubuntu.usbcreator.policy.in.h:5 msgid "Run KVM" msgstr "" #: .././dbus/com.ubuntu.usbcreator.policy.in.h:6 msgid "System policy prevents running KVM" msgstr "" #: .././usbcreator/frontends/kde/frontend.py:182 #: usbcreator/frontends/kde/frontend.py:182 msgid "Cancel" msgstr "" #: .././usbcreator/frontends/kde/frontend.py:211 #: .././usbcreator/frontends/gtk/frontend.py:648 #: usbcreator/frontends/kde/frontend.py:211 msgid "Installation failed." msgstr "" #: .././usbcreator/frontends/kde/frontend.py:366 #: .././usbcreator/frontends/gtk/frontend.py:423 #: usbcreator/frontends/kde/frontend.py:366 msgid "The device is not large enough to hold this image." msgstr "" #. #-#-#-#-# usbcreator.pot (PACKAGE VERSION) #-#-#-#-# #. This here filter is for kfiledialog, no clue if it will ever make a return #. filter = '*.iso|' + _('CD Images') + '\n*.img|' + _('Disk Images') #: .././usbcreator/frontends/kde/frontend.py:398 #: .././usbcreator/frontends/gtk/frontend.py:541 #: usbcreator/frontends/kde/frontend.py:398 msgid "CD Images" msgstr "" #: .././usbcreator/frontends/kde/frontend.py:398 #: .././usbcreator/frontends/gtk/frontend.py:542 #: usbcreator/frontends/kde/frontend.py:398 msgid "Disk Images" msgstr "" #: .././usbcreator/frontends/kde/frontend.py:428 #: .././usbcreator/frontends/gtk/frontend.py:570 #: usbcreator/frontends/kde/frontend.py:428 msgid "Are you sure you want to write the disc image to the device?" msgstr "" #: .././usbcreator/frontends/kde/frontend.py:429 #: .././usbcreator/frontends/gtk/frontend.py:571 #: usbcreator/frontends/kde/frontend.py:429 msgid "All existing data will be lost." msgstr "" #: .././usbcreator/frontends/kde/frontend.py:437 #: usbcreator/frontends/kde/frontend.py:437 msgid "Starting up" msgstr "" #: .././usbcreator/frontends/kde/frontend.py:446 #: usbcreator/frontends/kde/frontend.py:446 msgid "You must select both source image and target device first." msgstr "" #: .././usbcreator/frontends/kde/frontend.py:457 #: .././usbcreator/frontends/gtk/frontend.py:604 #: usbcreator/frontends/kde/frontend.py:457 msgid "Finishing..." msgstr "" #: .././usbcreator/frontends/kde/frontend.py:476 #: usbcreator/frontends/kde/frontend.py:476 msgid "" "The installation is complete. You may now reboot your computer with this " "device inserted to try or install Ubuntu." msgstr "" #: .././usbcreator/frontends/kde/frontend.py:488 #: usbcreator/frontends/kde/frontend.py:488 msgid "Retry?" msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:335 msgid "CD-Drive/Image" msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:348 msgid "OS Version" msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:358 msgid "Size" msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:493 msgid "Device" msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:509 msgid "Label" msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:519 msgid "Capacity" msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:577 msgid "Starting up..." msgstr "" #: .././usbcreator/frontends/gtk/frontend.py:602 #, python-format msgid "%d%% complete" msgstr "" #: .././usbcreator/install.py:92 #, python-format msgid "The extension \"%s\" is not supported." msgstr "" #: .././usbcreator/install.py:101 #, python-format msgid "" "An uncaught exception was raised:\n" "%s" msgstr "" #: .././usbcreator/install.py:105 msgid "Writing disk image..." msgstr "" #: .././usbcreator/install.py:106 #, python-format msgid "" "Could not write the disk image (%(source)s) to the device (%(device)s)." msgstr "" #: .././bin/usb-creator-kde:64 msgid "provide a source image to pre-populate the UI." msgstr "" #: .././bin/usb-creator-kde:69 msgid "allow writing to system-internal devices" msgstr "" language-pack-nds-base/data/nds/LC_MESSAGES/dpkg.po0000644000000000000000000036666212734303741016733 0ustar # German, Low translation for dpkg # Copyright (c) 2008 Rosetta Contributors and Canonical Ltd 2008 # This file is distributed under the same license as the dpkg package. # FIRST AUTHOR , 2008. # msgid "" msgstr "" "Project-Id-Version: dpkg\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2015-12-25 13:29+0100\n" "PO-Revision-Date: 2009-10-20 16:10+0000\n" "Last-Translator: ah8982 \n" "Language-Team: German, Low \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2016-06-27 16:12+0000\n" "X-Generator: Launchpad (build 18115)\n" #: lib/dpkg/ar.c:66 #, c-format msgid "invalid character '%c' in archive '%.250s' member '%.16s' size" msgstr "" #: lib/dpkg/ar.c:81 lib/dpkg/ar.c:97 lib/dpkg/ar.c:108 lib/dpkg/ar.c:112 #: lib/dpkg/ar.c:134 utils/update-alternatives.c:1154 #, c-format msgid "unable to write file '%s'" msgstr "" #: lib/dpkg/ar.c:98 #, c-format msgid "ar member name '%s' length too long" msgstr "" #: lib/dpkg/ar.c:100 #, c-format msgid "ar member size %jd too large" msgstr "" #: lib/dpkg/ar.c:94 #, c-format msgid "generated corrupt ar header for '%s'" msgstr "" #: lib/dpkg/ar.c:123 #, c-format msgid "failed to fstat ar member file (%s)" msgstr "" #: lib/dpkg/ar.c:144 #, c-format msgid "cannot append ar member file (%s) to '%s': %s" msgstr "" #: lib/dpkg/parsehelp.c:125 msgid "may not be empty string" msgstr "" #: lib/dpkg/arch.c:66 msgid "must start with an alphanumeric" msgstr "" #: lib/dpkg/arch.c lib/dpkg/parsehelp.c #, c-format msgid "character '%c' not allowed (only letters, digits and characters '%s')" msgstr "" #: lib/dpkg/arch.c:236 msgctxt "architecture" msgid "" msgstr "" #: lib/dpkg/arch.c:238 msgctxt "architecture" msgid "" msgstr "" #: lib/dpkg/arch.c:327 msgid "error writing to architecture list" msgstr "" #: lib/dpkg/atomic-file.c:57 #, c-format msgid "unable to create new file '%.250s'" msgstr "" #: lib/dpkg/atomic-file.c:68 #, c-format msgid "unable to write new file '%.250s'" msgstr "" #: lib/dpkg/atomic-file.c:70 #, c-format msgid "unable to flush new file '%.250s'" msgstr "" #: lib/dpkg/atomic-file.c:72 #, c-format msgid "unable to sync new file '%.250s'" msgstr "" #: lib/dpkg/atomic-file.c #, c-format msgid "unable to close new file '%.250s'" msgstr "" #: lib/dpkg/atomic-file.c:92 #, c-format msgid "error removing old backup file '%s'" msgstr "" #: lib/dpkg/atomic-file.c:94 #, c-format msgid "error creating new backup file '%s'" msgstr "" #: src/remove.c:383 #, c-format msgid "cannot remove '%.250s'" msgstr "" #: lib/dpkg/atomic-file.c:115 #, c-format msgid "error installing new file '%s'" msgstr "" #: lib/dpkg/buffer.c:133 msgid "failed to write" msgstr "" #: lib/dpkg/buffer.c:154 msgid "failed to read" msgstr "" #: lib/dpkg/buffer.c:223 msgid "unexpected end of file or stream" msgstr "" #: lib/dpkg/buffer.c:269 msgid "failed to seek" msgstr "" #: lib/dpkg/command.c:178 lib/dpkg/command.c:204 src/help.c:621 #: src/processarc.c:98 src/processarc.c:138 src/processarc.c:432 #: src/processarc.c:839 dpkg-deb/build.c:459 dpkg-deb/build.c:538 #: dpkg-deb/build.c:561 dpkg-deb/extract.c:317 dpkg-deb/info.c:65 #: dpkg-split/split.c:69 utils/update-alternatives.c:457 #, c-format msgid "unable to execute %s (%s)" msgstr "" #: lib/dpkg/compress.c:113 lib/dpkg/compress.c:122 #, c-format msgid "%s: pass-through copy error: %s" msgstr "" #: lib/dpkg/compress.c:112 #, c-format msgid "%s: error binding input to gzip stream" msgstr "" #: lib/dpkg/compress.c:124 #, c-format msgid "%s: internal gzip read error: '%s'" msgstr "" #: lib/dpkg/compress.c:132 lib/dpkg/compress.c:136 #, c-format msgid "%s: internal gzip write error" msgstr "" #: lib/dpkg/compress.c:150 #, c-format msgid "%s: error binding output to gzip stream" msgstr "" #: lib/dpkg/compress.c:157 #, c-format msgid "%s: internal gzip read error" msgstr "" #: lib/dpkg/compress.c:167 #, c-format msgid "%s: internal gzip write error: '%s'" msgstr "" #: lib/dpkg/compress.c:180 #, c-format msgid "%s: internal gzip write error: %s" msgstr "" #: lib/dpkg/compress.c:220 #, c-format msgid "%s: error binding input to bzip2 stream" msgstr "" #: lib/dpkg/compress.c:232 #, c-format msgid "%s: internal bzip2 read error: '%s'" msgstr "" #: lib/dpkg/compress.c:240 lib/dpkg/compress.c:244 lib/dpkg/compress.c:294 #, c-format msgid "%s: internal bzip2 write error" msgstr "" #: lib/dpkg/compress.c:258 #, c-format msgid "%s: error binding output to bzip2 stream" msgstr "" #: lib/dpkg/compress.c:265 #, c-format msgid "%s: internal bzip2 read error" msgstr "" #: lib/dpkg/compress.c:275 lib/dpkg/compress.c:286 #, c-format msgid "%s: internal bzip2 write error: '%s'" msgstr "" #: lib/dpkg/compress.c:282 msgid "unexpected bzip2 error" msgstr "" #: lib/dpkg/compress.c:412 msgid "internal error (bug)" msgstr "" #: lib/dpkg/compress.c:419 msgid "memory usage limit reached" msgstr "" #: lib/dpkg/compress.c:423 msgid "unsupported compression preset" msgstr "" #: lib/dpkg/compress.c:425 msgid "unsupported options in file header" msgstr "" #: lib/dpkg/compress.c:429 msgid "compressed data is corrupt" msgstr "" #: lib/dpkg/compress.c:433 msgid "unexpected end of input" msgstr "" #: lib/dpkg/compress.c:437 msgid "file format not recognized" msgstr "" #: lib/dpkg/compress.c:441 msgid "unsupported type of integrity check" msgstr "" #: lib/dpkg/compress.c:482 #, c-format msgid "%s: lzma read error" msgstr "" #: lib/dpkg/compress.c:494 #, c-format msgid "%s: lzma write error" msgstr "" #: lib/dpkg/compress.c:503 #, c-format msgid "%s: lzma close error" msgstr "" #: lib/dpkg/compress.c:509 #, c-format msgid "%s: lzma error: %s" msgstr "" #: lib/dpkg/compress.c:799 msgid "unknown compression strategy" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "" "updates directory contains file '%.250s' whose name is too long (length=%d, " "max=%d)" msgstr "" #: lib/dpkg/dbmodify.c:72 #, c-format msgid "" "updates directory contains files with different length names (both %d and %d)" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "cannot scan updates directory '%.255s'" msgstr "" #: lib/dpkg/dbmodify.c:102 #, c-format msgid "failed to remove incorporated update file %.255s" msgstr "" #: lib/dpkg/dbmodify.c dpkg-deb/build.c #, c-format msgid "unable to create '%.255s'" msgstr "" #: lib/dpkg/dbmodify.c:125 #, c-format msgid "unable to fill %.250s with padding" msgstr "" #: lib/dpkg/dbmodify.c:127 #, c-format msgid "unable to flush %.250s after padding" msgstr "" #: lib/dpkg/dbmodify.c:129 #, c-format msgid "unable to seek to start of %.250s after padding" msgstr "" #: lib/dpkg/dbmodify.c:195 #, c-format msgid "unable to open lock file %s for testing" msgstr "" #: lib/dpkg/dbmodify.c:221 msgid "unable to open/create status database lockfile" msgstr "" #: lib/dpkg/dbmodify.c:231 msgid "you do not have permission to lock the dpkg status database" msgstr "" #: lib/dpkg/dbmodify.c:233 msgid "dpkg status database" msgstr "" #: lib/dpkg/dbmodify.c:257 msgid "requested operation requires superuser privilege" msgstr "" #: lib/dpkg/dbmodify.c:262 msgid "unable to access dpkg status area" msgstr "" #: lib/dpkg/dbmodify.c:264 msgid "operation requires read/write access to dpkg status area" msgstr "" #: lib/dpkg/dbmodify.c:309 #, c-format msgid "failed to remove my own update file %.255s" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "unable to write updated status of '%.250s'" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "unable to flush updated status of '%.250s'" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "unable to truncate for updated status of '%.250s'" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "unable to fsync updated status of '%.250s'" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "unable to close updated status of '%.250s'" msgstr "" #: lib/dpkg/dbmodify.c #, c-format msgid "unable to install updated status of '%.250s'" msgstr "" #: lib/dpkg/deb-version.c:55 msgid "format version with empty major component" msgstr "" #: lib/dpkg/deb-version.c:57 msgid "format version has no dot" msgstr "" #: lib/dpkg/deb-version.c:63 msgid "format version with empty minor component" msgstr "" #: lib/dpkg/deb-version.c:65 msgid "format version followed by junk" msgstr "" #: lib/dpkg/dir.c:50 #, c-format msgid "unable to get file descriptor for directory '%s'" msgstr "" #: lib/dpkg/dir.c:54 #, c-format msgid "unable to sync directory '%s'" msgstr "" #: lib/dpkg/dir.c:69 lib/dpkg/dir.c:131 #, c-format msgid "unable to open directory '%s'" msgstr "" #: lib/dpkg/dir.c:109 src/divertcmd.c:218 dpkg-split/split.c:202 #: utils/update-alternatives.c:1293 #, c-format msgid "unable to open file '%s'" msgstr "" #: lib/dpkg/dir.c:111 src/divertcmd.c:232 src/divertcmd.c:377 #: src/statcmd.c:217 dpkg-deb/build.c:598 dpkg-split/join.c:65 #: dpkg-split/queue.c:187 utils/update-alternatives.c:1406 #, c-format msgid "unable to sync file '%s'" msgstr "" #: lib/dpkg/dir.c:113 src/divertcmd.c:234 src/divertcmd.c:379 #: dpkg-deb/build.c:600 dpkg-split/join.c:67 dpkg-split/queue.c:189 #: utils/update-alternatives.c:1314 utils/update-alternatives.c:1408 #, c-format msgid "unable to close file '%s'" msgstr "" #: lib/dpkg/dump.c #, c-format msgid "failed to write details of '%.50s' to '%.250s'" msgstr "" #: lib/dpkg/dump.c:426 #, c-format msgid "unable to set buffering on %s database file" msgstr "" #: lib/dpkg/dump.c:438 #, c-format msgid "failed to write %s database record about '%.50s' to '%.250s'" msgstr "" #: lib/dpkg/ehandle.c:94 #, c-format msgid "" "%s: unrecoverable fatal error, aborting:\n" " %s\n" msgstr "" #: lib/dpkg/ehandle.c:100 #, c-format msgid "" "%s: outside error context, aborting:\n" " %s\n" msgstr "" #: lib/dpkg/ehandle.c:120 msgid "out of memory for new error context" msgstr "" #: lib/dpkg/ehandle.c:183 #, c-format msgid "" "%s: error while cleaning up:\n" " %s\n" msgstr "" #: lib/dpkg/ehandle.c:201 #, c-format msgid "%s: too many nested errors during error recovery!!\n" msgstr "" #: lib/dpkg/ehandle.c:268 lib/dpkg/ehandle.c:307 msgid "out of memory for new cleanup entry" msgstr "" #: lib/dpkg/ehandle.c:291 msgid "out of memory for new cleanup entry with many arguments" msgstr "" #: lib/dpkg/ehandle.c:352 #, c-format msgid "%s: error: %s\n" msgstr "" #: lib/dpkg/ehandle.c:394 #, c-format msgid "%s:%s:%d:%s: internal error: %s\n" msgstr "" #: lib/dpkg/fields.c:45 #, c-format msgid "%s is missing" msgstr "" #: lib/dpkg/fields.c:49 #, c-format msgid "'%.50s' is not allowed for %s" msgstr "" #: lib/dpkg/fields.c:73 #, c-format msgid "junk after %s" msgstr "" #: lib/dpkg/fields.c:87 #, c-format msgid "invalid package name (%.250s)" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "empty file details field '%s'" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "file details field '%s' not allowed in status file" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "too many values in file details field '%s' (compared to others)" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "too few values in file details field '%s' (compared to others)" msgstr "" #: lib/dpkg/fields.c:154 msgid "yes/no in boolean field" msgstr "" #: lib/dpkg/fields.c:177 msgid "foreign/allowed/same/no in quadstate field" msgstr "" #: lib/dpkg/fields.c:189 #, c-format msgid "'%s' is not a valid architecture name: %s" msgstr "" #: lib/dpkg/fields.c:208 msgid "word in 'Priority' field" msgstr "" #: lib/dpkg/fields.c:221 lib/dpkg/fields.c:272 lib/dpkg/fields.c:622 #: lib/dpkg/fields.c:647 #, c-format msgid "value for '%s' field not allowed in this context" msgstr "" #: lib/dpkg/fields.c:226 msgid "first (want) word in 'Status' field" msgstr "" #: lib/dpkg/fields.c:228 msgid "second (error) word in 'Status' field" msgstr "" #: lib/dpkg/fields.c:230 msgid "third (status) word in 'Status' field" msgstr "" #: lib/dpkg/fields.c:240 lib/dpkg/fields.c:278 #, c-format msgid "error in '%s' field string '%.250s'" msgstr "" #: lib/dpkg/fields.c:252 #, c-format msgid "obsolete '%s' or '%s' field used" msgstr "" #: lib/dpkg/fields.c:305 #, c-format msgid "value for '%s' field has malformatted line '%.*s'" msgstr "" #: lib/dpkg/fields.c:327 #, c-format msgid "value for '%s' has line starting with non-space '%c'" msgstr "" #: lib/dpkg/fields.c:304 msgid "root or null directory is listed as a conffile" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "" "'%s' field, missing package name, or garbage where package name expected" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "'%s' field, invalid package name '%.255s': %s" msgstr "" #: lib/dpkg/fields.c:444 #, c-format msgid "" "'%s' field, missing architecture name, or garbage where architecture name " "expected" msgstr "" #: lib/dpkg/fields.c:457 #, c-format msgid "" "'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "" "'%s' field, reference to '%.255s':\n" " bad version relationship %c%c" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "" "'%s' field, reference to '%.255s':\n" " '%c' is obsolete, use '%c=' or '%c%c' instead" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "" "'%s' field, reference to '%.255s':\n" " implicit exact match on version number, suggest using '=' instead" msgstr "" #: lib/dpkg/fields.c:515 #, c-format msgid "only exact versions may be used for '%s' field" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "" "'%s' field, reference to '%.255s':\n" " version value starts with non-alphanumeric, suggest adding a space" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "'%s' field, reference to '%.255s': version contains '%c'" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "'%s' field, reference to '%.255s': version unterminated" msgstr "" #: lib/dpkg/fields.c:465 #, c-format msgid "'%s' field, reference to '%.255s': error in version" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "'%s' field, syntax error after reference to package '%.255s'" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "alternatives ('|') not allowed in %s field" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "illegal pending trigger name '%.255s': %s" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "duplicate pending trigger '%.255s'" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "illegal package name in awaited trigger '%.255s': %s" msgstr "" #: lib/dpkg/fields.c #, c-format msgid "duplicate awaited trigger package '%.255s'" msgstr "" #: lib/dpkg/file.c:51 #, c-format msgid "unable to stat source file '%.250s'" msgstr "" #: lib/dpkg/file.c:55 #, c-format msgid "unable to change ownership of target file '%.250s'" msgstr "" #: lib/dpkg/file.c:59 #, c-format msgid "unable to set mode of target file '%.250s'" msgstr "" #: lib/dpkg/file.c:85 #, c-format msgid "unable to unlock %s" msgstr "" #: lib/dpkg/file.c:111 #, c-format msgid "unable to check file '%s' lock status" msgstr "" #: lib/dpkg/file.c:146 #, c-format msgid "%s is locked by another process" msgstr "" #: lib/dpkg/file.c:148 #, c-format msgid "unable to lock %s" msgstr "" #: lib/dpkg/file.c:171 lib/dpkg/file.c:176 msgid "showing file on pager" msgstr "" #: lib/dpkg/log.c:53 #, c-format msgid "could not open log '%s': %s" msgstr "" #: lib/dpkg/log.c:85 msgid "" msgstr "" #: lib/dpkg/log.c:114 #, c-format msgid "unable to write to status fd %d" msgstr "" #: lib/dpkg/mlib.c:72 lib/dpkg/mlib.c:90 utils/update-alternatives.c:277 #: utils/update-alternatives.c:334 utils/update-alternatives.c:1107 msgid "failed to allocate memory" msgstr "" #: lib/dpkg/mlib.c:102 #, c-format msgid "failed to dup for std%s" msgstr "" #: lib/dpkg/mlib.c:103 #, c-format msgid "failed to dup for fd %d" msgstr "" #: lib/dpkg/mlib.c:109 msgid "failed to create pipe" msgstr "" #: lib/dpkg/mlib.c:117 #, c-format msgid "error writing to '%s'" msgstr "" #: lib/dpkg/mlib.c:124 #, c-format msgid "unable to read filedescriptor flags for %.250s" msgstr "" #: lib/dpkg/mlib.c:126 #, c-format msgid "unable to set close-on-exec flag for %.250s" msgstr "" #: lib/dpkg/options.c:63 #, c-format msgid "configuration error: %s:%d: %s" msgstr "" #: lib/dpkg/options.c:75 #, c-format msgid "failed to open configuration file '%.255s' for reading: %s" msgstr "" #: lib/dpkg/options.c:102 #, c-format msgid "unbalanced quotes in '%s'" msgstr "" #: lib/dpkg/options.c:117 #, c-format msgid "unknown option '%s'" msgstr "" #: lib/dpkg/options.c:121 #, c-format msgid "'%s' needs a value" msgstr "" #: lib/dpkg/options.c:127 #, c-format msgid "'%s' does not take a value" msgstr "" #: lib/dpkg/options.c #, c-format msgid "read error in configuration file '%.255s'" msgstr "" #: lib/dpkg/options.c #, c-format msgid "error closing configuration file '%.255s'" msgstr "" #: lib/dpkg/options.c:170 #, c-format msgid "error opening configuration directory '%s'" msgstr "" #: lib/dpkg/options.c:228 #, c-format msgid "unknown option --%s" msgstr "" #: lib/dpkg/options.c:232 #, c-format msgid "--%s option takes a value" msgstr "" #: lib/dpkg/options.c:237 #, c-format msgid "--%s option does not take a value" msgstr "" #: lib/dpkg/options.c:245 #, c-format msgid "unknown option -%c" msgstr "" #: lib/dpkg/options.c:250 #, c-format msgid "-%c option takes a value" msgstr "" #: lib/dpkg/options.c:258 #, c-format msgid "-%c option does not take a value" msgstr "" #: lib/dpkg/options.c dpkg-split/main.c #, c-format msgid "invalid integer for --%s: '%.250s'" msgstr "" #: lib/dpkg/options.c #, c-format msgid "obsolete option '--%s'" msgstr "" #: lib/dpkg/options.c:287 #, c-format msgid "conflicting actions -%c (--%s) and -%c (--%s)" msgstr "" #: src/main.c:378 src/packages.c:114 src/querycmd.c:440 src/querycmd.c:685 #: src/querycmd.c:717 src/querycmd.c:754 #, c-format msgid "--%s needs a valid package name but '%.250s' is not: %s" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "duplicate value for '%s' field" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "user-defined field name '%.*s' too short" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "duplicate value for user-defined field '%.*s'" msgstr "" #: lib/dpkg/parsehelp.c:299 lib/dpkg/parsehelp.c:311 #, c-format msgid "missing %s" msgstr "" #: lib/dpkg/parsehelp.c:301 lib/dpkg/parsehelp.c:314 #, c-format msgid "empty value for %s" msgstr "" #: lib/dpkg/parse.c:211 #, c-format msgid "package has field '%s' but is missing architecture" msgstr "" #: lib/dpkg/parse.c:214 #, c-format msgid "package has field '%s' but is architecture all" msgstr "" #: lib/dpkg/parse.c:232 msgid "Config-Version for package with inappropriate Status" msgstr "" #: lib/dpkg/parse.c:218 #, c-format msgid "package has status %s but triggers are awaited" msgstr "" #: lib/dpkg/parse.c:222 msgid "package has status triggers-awaited but no triggers awaited" msgstr "" #: lib/dpkg/parse.c:228 #, c-format msgid "package has status %s but triggers are pending" msgstr "" #: lib/dpkg/parse.c:232 msgid "package has status triggers-pending but no triggers pending" msgstr "" #: lib/dpkg/parse.c:242 msgid "Package which in state not-installed has conffiles, forgetting them" msgstr "" #: lib/dpkg/parse.c:345 msgid "" "multiple non-coinstallable package instances present; most probably due to " "an upgrade from an unofficial dpkg" msgstr "" #: lib/dpkg/parse.c:349 msgid "" "mixed non-coinstallable and coinstallable package instances present; most " "probably due to an upgrade from an unofficial dpkg" msgstr "" #: lib/dpkg/parse.c:409 #, c-format msgid "" "%s %s (Multi-Arch: %s) is not co-installable with %s which has multiple " "installed instances" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "failed to open package info file '%.255s' for reading" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "can't stat package info file '%.255s'" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "reading package info file '%s': %s" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "can't mmap package info file '%.255s'" msgstr "" #: lib/dpkg/parse.c:352 #, c-format msgid "reading package info file '%.255s'" msgstr "" #: lib/dpkg/parse.c:585 msgid "empty field name" msgstr "" #: lib/dpkg/parse.c:587 #, c-format msgid "field name '%.*s' cannot start with hyphen" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "end of file after field name '%.*s'" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "newline in field name '%.*s'" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "MSDOS end of file (^Z) in field name '%.*s'" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "field name '%.*s' must be followed by colon" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "end of file before value of field '%.*s' (missing final newline)" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)" msgstr "" #: lib/dpkg/parse.c:440 #, c-format msgid "blank line in value of field '%.*s'" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "end of file during value of field '%.*s' (missing final newline)" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "failed to close after read: '%.255s'" msgstr "" #: lib/dpkg/parse.c:546 msgid "several package info entries found, only one allowed" msgstr "" #: lib/dpkg/parse.c #, c-format msgid "no package information in '%.255s'" msgstr "" #: lib/dpkg/parsehelp.c:45 #, c-format msgid "" "parsing file '%.255s' near line %d package '%.255s':\n" " %.255s" msgstr "" #: lib/dpkg/parsehelp.c:48 #, c-format msgid "" "parsing file '%.255s' near line %d:\n" " %.255s" msgstr "" #: lib/dpkg/parsehelp.c:127 msgid "must start with an alphanumeric character" msgstr "" #: lib/dpkg/parsehelp.c:178 msgctxt "version" msgid "" msgstr "" #: lib/dpkg/parsehelp.c:209 msgid "version string is empty" msgstr "" #: lib/dpkg/parsehelp.c:224 msgid "version string has embedded spaces" msgstr "" #: lib/dpkg/parsehelp.c:230 msgid "epoch in version is not number" msgstr "" #: lib/dpkg/parsehelp.c:243 msgid "epoch in version is negative" msgstr "" #: lib/dpkg/parsehelp.c:245 msgid "epoch in version is too big" msgstr "" #: lib/dpkg/parsehelp.c:232 msgid "nothing after colon in version number" msgstr "" #: lib/dpkg/parsehelp.c:247 msgid "version number does not start with digit" msgstr "" #: lib/dpkg/parsehelp.c:250 msgid "invalid character in version number" msgstr "" #: lib/dpkg/parsehelp.c:254 msgid "invalid character in revision number" msgstr "" #: src/help.c:616 #, c-format msgid "unable to securely remove '%.255s'" msgstr "" #: src/help.c:621 dpkg-deb/info.c:65 dpkg-deb/info.c:67 msgid "rm command for cleanup" msgstr "" #: lib/dpkg/pkg-db.c:164 lib/dpkg/pkg-spec.c:97 #, c-format msgid "ambiguous package name '%s' with more than one installed instance" msgstr "" #: lib/dpkg/pkg-format.c:87 #, c-format msgid "invalid character '%c' in field width" msgstr "" #: lib/dpkg/pkg-format.c:92 msgid "field width is out of range" msgstr "" #: lib/dpkg/pkg-format.c:183 msgid "missing closing brace" msgstr "" #: lib/dpkg/pkg-show.c:40 msgid "(no description available)" msgstr "" #: lib/dpkg/pkg-spec.c:71 #, c-format msgid "illegal package name in specifier '%s%s%s': %s" msgstr "" #: lib/dpkg/pkg-spec.c:81 #, c-format msgid "illegal architecture name in specifier '%s:%s': %s" msgstr "" #: lib/dpkg/ehandle.c:393 #, c-format msgid "%s: warning: %s\n" msgstr "" #: lib/dpkg/strwide.c:60 #, c-format msgid "cannot convert multibyte string '%s' to a wide-character string" msgstr "" #: lib/dpkg/strwide.c:113 #, c-format msgid "cannot convert multibyte sequence '%s' to a wide character" msgstr "" #: lib/dpkg/subproc.c:68 #, c-format msgid "error un-catching signal %s: %s\n" msgstr "" #: lib/dpkg/subproc.c:55 #, c-format msgid "unable to ignore signal %s before running %.250s" msgstr "" #: lib/dpkg/subproc.c:78 #, c-format msgid "%s (subprocess): %s\n" msgstr "" #: lib/dpkg/subproc.c:89 utils/update-alternatives.c:454 msgid "fork failed" msgstr "" #: lib/dpkg/subproc.c:119 #, c-format msgid "subprocess %s returned error exit status %d" msgstr "" #: lib/dpkg/subproc.c:128 #, c-format msgid "subprocess %s was interrupted" msgstr "" #: lib/dpkg/subproc.c:130 #, c-format msgid "subprocess %s was killed by signal (%s)%s" msgstr "" #: lib/dpkg/subproc.c:132 msgid ", core dumped" msgstr "" #: lib/dpkg/subproc.c:134 #, c-format msgid "subprocess %s failed with wait status code %d" msgstr "" #: lib/dpkg/subproc.c:151 utils/update-alternatives.c:461 #, c-format msgid "wait for subprocess %s failed" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "invalid package name '%.250s' in triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "truncated triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "syntax error in triggers deferred file '%.250s' at character '%s'%s" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "unable to open/create triggers lockfile '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l:141 msgid "triggers area" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "unable to open triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "unable to stat triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "unable to open/create new triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "error reading triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "unable to write new triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "unable to close new triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/trigdeferred.l #, c-format msgid "unable to install new triggers deferred file '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "" "invalid or unknown syntax in trigger name '%.250s' (in trigger interests for " "package '%.250s')" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "failed to open trigger interest list file '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "failed to rewind trigger interest file '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "" "trigger interest file '%.250s' syntax error; illegal package name '%.250s': " "%.250s" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "" "duplicate file trigger interest for filename '%.250s' and package '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "unable to read file triggers file '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "syntax error in file triggers file '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "" "file triggers record mentions illegal package name '%.250s' (for interest in " "file '%.250s'): %.250s" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "" "triggers ci file '%.250s' contains illegal trigger syntax in trigger name " "'%.250s': %.250s" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "unable to open triggers ci file '%.250s'" msgstr "" #: lib/dpkg/triglib.c:699 msgid "triggers ci file contains unknown directive syntax" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "triggers ci file contains unknown directive '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "unable to create triggers state directory '%.250s'" msgstr "" #: lib/dpkg/triglib.c #, c-format msgid "unable to set ownership of triggers state directory '%.250s'" msgstr "" #: lib/dpkg/trigname.c:34 msgid "empty trigger names are not permitted" msgstr "" #: lib/dpkg/trigname.c:38 msgid "trigger name contains invalid character" msgstr "" #: lib/dpkg/utils.c #, c-format msgid "read error in '%.250s'" msgstr "" #: lib/dpkg/utils.c #, c-format msgid "fgets gave an empty string from '%.250s'" msgstr "" #: lib/dpkg/utils.c #, c-format msgid "too-long line or missing newline in '%.250s'" msgstr "" #: lib/dpkg/utils.c #, c-format msgid "unexpected end of file reading '%.250s'" msgstr "" #: lib/dpkg/varbuf.c:82 lib/dpkg/varbuf.c:88 msgid "error formatting string into varbuf variable" msgstr "" #: src/archives.c:179 src/archives.c:200 src/archives.c:724 msgid "error reading from dpkg-deb pipe" msgstr "" #: src/archives.c:259 #, c-format msgid "cannot skip padding for file '%.255s': %s" msgstr "" #: src/archives.c:272 #, c-format msgid "cannot skip file '%.255s' (replaced or excluded?) from pipe: %s" msgstr "" #: src/archives.c #, c-format msgid "unable to create '%.255s' (while processing '%.255s')" msgstr "" #: src/archives.c:342 #, c-format msgid "cannot copy extracted data for '%.255s' to '%.255s': %s" msgstr "" #: src/archives.c src/statcmd.c #, c-format msgid "error setting ownership of '%.255s'" msgstr "" #: src/archives.c src/statcmd.c #, c-format msgid "error setting permissions of '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "error closing/writing '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "error creating pipe '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "error creating device '%.255s'" msgstr "" #: src/archives.c src/infodb-upgrade.c #, c-format msgid "error creating hard link '%.255s'" msgstr "" #: src/archives.c utils/update-alternatives.c #, c-format msgid "error creating symbolic link '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "error creating directory '%.255s'" msgstr "" #: src/archives.c:428 #, c-format msgid "cannot compute MD5 hash for tar file '%.255s': %s" msgstr "" #: src/archives.c #, c-format msgid "error setting timestamps of '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "error setting ownership of symlink '%.255s'" msgstr "" #: src/archives.c utils/update-alternatives.c #, c-format msgid "unable to read link '%.255s'" msgstr "" #: src/archives.c:834 src/configure.c:423 #, c-format msgid "symbolic link '%.250s' size has changed from %jd to %zd" msgstr "" #: src/archives.c:640 #, c-format msgid "" "trying to overwrite shared '%.250s', which is different from other instances " "of package %.250s" msgstr "" #: src/archives.c #, c-format msgid "failed to stat (dereference) existing symlink '%.250s'" msgstr "" #: src/archives.c #, c-format msgid "" "failed to stat (dereference) proposed new symlink target '%.250s' for " "symlink '%.250s'" msgstr "" #: src/archives.c #, c-format msgid "newline not allowed in archive object name '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "" "trying to overwrite '%.250s', which is the diverted version of '%.250s' " "(package: %.100s)" msgstr "" #: src/archives.c #, c-format msgid "" "trying to overwrite '%.250s', which is the diverted version of '%.250s'" msgstr "" #: src/archives.c #, c-format msgid "unable to stat '%.255s' (which I was about to install)" msgstr "" #: src/archives.c #, c-format msgid "" "unable to clean up mess surrounding '%.255s' before installing another " "version" msgstr "" #: src/archives.c #, c-format msgid "unable to stat restored '%.255s' before installing another version" msgstr "" #: src/archives.c #, c-format msgid "archive contained object '%.255s' of unknown type 0x%x" msgstr "" #: src/archives.c:626 src/divertcmd.c:150 utils/update-alternatives.c:682 #: utils/update-alternatives.c:1222 utils/update-alternatives.c:1284 #: utils/update-alternatives.c:1441 utils/update-alternatives.c:1680 #: utils/update-alternatives.c:2167 utils/update-alternatives.c:2244 #: utils/update-alternatives.c:2527 #, c-format msgid "cannot stat file '%s'" msgstr "" #: src/archives.c:993 #, c-format msgid "Replacing files in old package %s (%s) ...\n" msgstr "" #: src/archives.c:999 #, c-format msgid "Replaced by files in installed package %s (%s) ...\n" msgstr "" #: src/archives.c:654 #, c-format msgid "" "trying to overwrite directory '%.250s' in package %.250s %.250s with " "nondirectory" msgstr "" #: src/archives.c:661 #, c-format msgid "trying to overwrite '%.250s', which is also in package %.250s %.250s" msgstr "" #: src/archives.c #, c-format msgid "unable to move aside '%.255s' to install new version" msgstr "" #: src/archives.c #, c-format msgid "unable to make backup symlink for '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "unable to chown backup symlink for '%.255s'" msgstr "" #: src/archives.c #, c-format msgid "unable to make backup link of '%.255s' before installing new version" msgstr "" #: src/archives.c #, c-format msgid "unable to install new version of '%.255s'" msgstr "" #: src/archives.c:902 src/archives.c:945 #, c-format msgid "unable to open '%.255s'" msgstr "" #: src/archives.c:947 #, c-format msgid "unable to sync file '%.255s'" msgstr "" #: src/archives.c:1000 #, c-format msgid "" "ignoring dependency problem with %s:\n" "%s" msgstr "" #: src/archives.c:1332 #, c-format msgid "" "considering deconfiguration of essential\n" " package %s, to enable %s" msgstr "" #: src/archives.c:1336 #, c-format msgid "" "no, %s is essential, will not deconfigure\n" " it in order to enable %s" msgstr "" #: src/archives.c:1345 #, c-format msgid "" "no, cannot proceed with %s (--auto-deconfigure will help):\n" "%s" msgstr "" #: src/archives.c:1032 #, c-format msgid "removal of %.250s" msgstr "" #: src/archives.c:1057 #, c-format msgid "installation of %.250s" msgstr "" #: src/archives.c:1382 #, c-format msgid "considering deconfiguration of %s, which would be broken by %s ..." msgstr "" #: src/archives.c:1388 #, c-format msgid "yes, will deconfigure %s (broken by %s)" msgstr "" #: src/archives.c:1393 src/archives.c:1514 #, c-format msgid "" "regarding %s containing %s:\n" "%s" msgstr "" #: src/archives.c:1077 msgid "ignoring breakage, may proceed anyway!" msgstr "" #: src/archives.c:1082 #, c-format msgid "" "installing %.250s would break %.250s, and\n" " deconfiguration is not permitted (--auto-deconfigure might help)" msgstr "" #: src/archives.c:1086 #, c-format msgid "installing %.250s would break existing software" msgstr "" #: src/archives.c:1441 #, c-format msgid "considering removing %s in favour of %s ..." msgstr "" #: src/archives.c:1447 #, c-format msgid "%s is not properly installed; ignoring any dependencies on it" msgstr "" #: src/archives.c:1476 #, c-format msgid "may have trouble removing %s, as it provides %s ..." msgstr "" #: src/archives.c:1491 #, c-format msgid "" "package %s requires reinstallation, but will remove anyway as you requested" msgstr "" #: src/archives.c:1495 #, c-format msgid "package %s requires reinstallation, will not remove" msgstr "" #: src/archives.c:1504 #, c-format msgid "yes, will remove %s in favour of %s" msgstr "" #: src/archives.c:1190 #, c-format msgid "conflicting packages - not installing %.250s" msgstr "" #: src/archives.c:1191 msgid "ignoring conflict, may proceed anyway!" msgstr "" #: src/archives.c:1235 #, c-format msgid "--%s --recursive needs at least one path argument" msgstr "" #: src/archives.c:1245 msgid "find for dpkg --recursive" msgstr "" #: src/archives.c:1266 msgid "failed to fdopen find's pipe" msgstr "" #: src/archives.c:1272 msgid "error reading find's pipe" msgstr "" #: src/archives.c:1273 msgid "error closing find's pipe" msgstr "" #: src/archives.c:1276 #, c-format msgid "find for --recursive returned unhandled error %i" msgstr "" #: src/archives.c:1279 msgid "searched, but found no packages (files matching *.deb)" msgstr "" #: src/archives.c:1290 #, c-format msgid "--%s needs at least one package archive file argument" msgstr "" #: src/archives.c:1325 src/divertcmd.c:78 src/divertcmd.c:118 #: src/enquiry.c:166 src/enquiry.c:279 src/enquiry.c:449 src/enquiry.c:451 #: src/enquiry.c:464 src/main.c:66 src/main.c:163 src/main.c:314 #: src/main.c:493 src/packages.c:254 src/querycmd.c:252 src/querycmd.c:355 #: src/querycmd.c:396 src/querycmd.c:404 src/querycmd.c:448 src/querycmd.c:517 #: src/querycmd.c:606 src/querycmd.c:650 src/select.c:79 src/statcmd.c:68 #: src/statcmd.c:98 src/trigcmd.c:58 src/trigcmd.c:90 dpkg-deb/build.c:441 #: dpkg-deb/extract.c:217 dpkg-deb/extract.c:250 dpkg-deb/info.c:203 #: dpkg-deb/info.c:265 dpkg-deb/main.c:60 dpkg-deb/main.c:126 #: dpkg-split/info.c:257 dpkg-split/main.c:54 dpkg-split/main.c:98 #: dpkg-split/queue.c:144 dpkg-split/queue.c:280 msgid "" msgstr "" #: src/archives.c:1326 src/packages.c:255 src/querycmd.c:253 #: src/querycmd.c:353 src/querycmd.c:454 src/querycmd.c:518 src/select.c:80 #: dpkg-split/main.c:169 dpkg-split/queue.c:218 msgid "" msgstr "" #: src/archives.c:1367 #, c-format msgid "Selecting previously unselected package %s.\n" msgstr "" #: src/archives.c:1371 #, c-format msgid "Skipping unselected package %s.\n" msgstr "" #: src/archives.c:1722 #, c-format msgid "version %.250s of %.250s already installed, skipping" msgstr "" #: src/archives.c:1731 #, c-format msgid "downgrading %.250s from %.250s to %.250s" msgstr "" #: src/archives.c:1737 #, c-format msgid "will not downgrade %.250s from %.250s to %.250s, skipping" msgstr "" #: src/cleanup.c #, c-format msgid "" "unable to remove newly-installed version of '%.250s' to allow reinstallation " "of backup copy" msgstr "" #: src/cleanup.c #, c-format msgid "unable to restore backup version of '%.250s'" msgstr "" #: src/cleanup.c:97 #, c-format msgid "unable to remove backup copy of '%.250s'" msgstr "" #: src/cleanup.c #, c-format msgid "unable to remove newly-installed version of '%.250s'" msgstr "" #: src/cleanup.c #, c-format msgid "unable to remove newly-extracted version of '%.250s'" msgstr "" #: src/configure.c:98 #, c-format msgid "Configuration file '%s'\n" msgstr "" #: src/configure.c:100 #, c-format msgid "Configuration file '%s' (actually '%s')\n" msgstr "" #: src/configure.c:105 #, c-format msgid "" " ==> File on system created by you or by a script.\n" " ==> File also in package provided by package maintainer.\n" msgstr "" #: src/configure.c:109 #, c-format msgid " Not modified since installation.\n" msgstr "" #: src/configure.c:111 #, c-format msgid " ==> Modified (by you or by a script) since installation.\n" msgstr "" #: src/configure.c:112 #, c-format msgid " ==> Deleted (by you or by a script) since installation.\n" msgstr "" #: src/configure.c:619 #, c-format msgid " ==> Package distributor has shipped an updated version.\n" msgstr "" #: src/configure.c:620 #, c-format msgid " Version in package is the same as at last installation.\n" msgstr "" #: src/configure.c:628 #, c-format msgid " ==> Using new file as you requested.\n" msgstr "" #: src/configure.c:632 #, c-format msgid " ==> Using current old file as you requested.\n" msgstr "" #: src/configure.c:641 #, c-format msgid " ==> Keeping old config file as default.\n" msgstr "" #: src/configure.c:645 #, c-format msgid " ==> Using new config file as default.\n" msgstr "" #: src/configure.c:652 #, c-format msgid "" " What would you like to do about it ? Your options are:\n" " Y or I : install the package maintainer's version\n" " N or O : keep your currently-installed version\n" " D : show the differences between the versions\n" " Z : start a shell to examine the situation\n" msgstr "" #: src/configure.c:659 #, c-format msgid " The default action is to keep your current version.\n" msgstr "" #: src/configure.c:661 #, c-format msgid " The default action is to install the new version.\n" msgstr "" #: src/configure.c:666 msgid "[default=N]" msgstr "" #: src/configure.c:667 msgid "[default=Y]" msgstr "" #: src/configure.c:668 msgid "[no default]" msgstr "" #: src/configure.c:671 msgid "error writing to stderr, discovered before conffile prompt" msgstr "" #: src/configure.c:680 msgid "read error on stdin at conffile prompt" msgstr "" #: src/configure.c msgid "end of file on stdin at conffile prompt" msgstr "" #: src/configure.c:522 src/configure.c:526 msgid "conffile difference visualizer" msgstr "" #: src/configure.c msgid "Type 'exit' when you're done.\n" msgstr "" #: src/configure.c:552 src/configure.c:556 msgid "conffile shell" msgstr "" #: src/configure.c:104 #, c-format msgid "unable to stat new distributed conffile '%.250s'" msgstr "" #: src/configure.c #, c-format msgid "unable to stat current installed conffile '%.250s'" msgstr "" #: src/configure.c #, c-format msgid "" "\n" "Configuration file '%s', does not exist on system.\n" "Installing new config file as you requested.\n" msgstr "" #: src/configure.c:168 #, c-format msgid "%s: failed to remove old backup '%.250s': %s" msgstr "" #: src/configure.c:176 #, c-format msgid "%s: failed to rename '%.250s' to '%.250s': %s" msgstr "" #: src/configure.c:182 #, c-format msgid "%s: failed to remove '%.250s': %s" msgstr "" #: src/configure.c:188 #, c-format msgid "%s: failed to remove old distributed version '%.250s': %s" msgstr "" #: src/configure.c:192 #, c-format msgid "%s: failed to remove '%.250s' (before overwrite): %s" msgstr "" #: src/configure.c:196 #, c-format msgid "%s: failed to link '%.250s' to '%.250s': %s" msgstr "" #: src/configure.c:200 #, c-format msgid "Installing new version of config file %s ...\n" msgstr "" #: src/configure.c utils/update-alternatives.c #, c-format msgid "unable to install '%.250s' as '%.250s'" msgstr "" #: src/configure.c #, c-format msgid "no package named '%s' is installed, cannot configure" msgstr "" #: src/configure.c:260 #, c-format msgid "package %.250s is already installed and configured" msgstr "" #: src/configure.c #, c-format msgid "" "package %.250s is not ready for configuration\n" " cannot configure (current status '%.250s')" msgstr "" #: src/configure.c:581 #, c-format msgid "" "package %s cannot be configured because %s is not ready (current status '%s')" msgstr "" #: src/configure.c:589 #, c-format msgid "" "package %s %s cannot be configured because %s is at a different version (%s)" msgstr "" #: src/configure.c:625 #, c-format msgid "" "dependency problems prevent configuration of %s:\n" "%s" msgstr "" #: src/configure.c:297 msgid "dependency problems - leaving unconfigured" msgstr "" #: src/configure.c:631 #, c-format msgid "" "%s: dependency problems, but configuring anyway as you requested:\n" "%s" msgstr "" #: src/configure.c:639 msgid "" "package is in a very bad inconsistent state; you should\n" " reinstall it before attempting configuration" msgstr "" #: src/configure.c:312 #, c-format msgid "Setting up %s (%s) ...\n" msgstr "" #: src/configure.c:396 #, c-format msgid "" "%s: unable to stat config file '%s'\n" " (= '%s'): %s" msgstr "" #: src/configure.c:409 #, c-format msgid "" "%s: config file '%s' is a circular link\n" " (= '%s')" msgstr "" #: src/configure.c:418 #, c-format msgid "" "%s: unable to readlink conffile '%s'\n" " (= '%s'): %s" msgstr "" #: src/configure.c:444 #, c-format msgid "" "%s: conffile '%.250s' resolves to degenerate filename\n" " ('%s' is a symlink to '%s')" msgstr "" #: src/configure.c:460 #, c-format msgid "%s: conffile '%.250s' is not a plain file or symlink (= '%s')" msgstr "" #: src/configure.c:825 dpkg-split/split.c:142 #, c-format msgid "cannot compute MD5 hash for file '%s': %s" msgstr "" #: src/configure.c:832 #, c-format msgid "%s: unable to open %s for hash: %s" msgstr "" #: src/depcon.c:175 #, c-format msgid "%s depends on %s" msgstr "" #: src/depcon.c:178 #, c-format msgid "%s pre-depends on %s" msgstr "" #: src/depcon.c:181 #, c-format msgid "%s recommends %s" msgstr "" #: src/depcon.c:184 #, c-format msgid "%s suggests %s" msgstr "" #: src/depcon.c:187 #, c-format msgid "%s breaks %s" msgstr "" #: src/depcon.c:190 #, c-format msgid "%s conflicts with %s" msgstr "" #: src/depcon.c:193 #, c-format msgid "%s enhances %s" msgstr "" #: src/depcon.c:296 #, c-format msgid " %.250s is to be removed.\n" msgstr "" #: src/depcon.c:299 #, c-format msgid " %.250s is to be deconfigured.\n" msgstr "" #: src/depcon.c:304 #, c-format msgid " %.250s is to be installed, but is version %.250s.\n" msgstr "" #: src/depcon.c:314 #, c-format msgid " %.250s is installed, but is version %.250s.\n" msgstr "" #: src/depcon.c:333 #, c-format msgid " %.250s is unpacked, but has never been configured.\n" msgstr "" #: src/depcon.c:337 #, c-format msgid " %.250s is unpacked, but is version %.250s.\n" msgstr "" #: src/depcon.c:343 #, c-format msgid " %.250s latest configured version is %.250s.\n" msgstr "" #: src/depcon.c:353 #, c-format msgid " %.250s is %s.\n" msgstr "" #: src/depcon.c:388 #, c-format msgid " %.250s provides %.250s but is to be removed.\n" msgstr "" #: src/depcon.c:392 #, c-format msgid " %.250s provides %.250s but is to be deconfigured.\n" msgstr "" #: src/depcon.c:401 #, c-format msgid " %.250s provides %.250s but is %s.\n" msgstr "" #: src/depcon.c:415 #, c-format msgid " %.250s is not installed.\n" msgstr "" #: src/depcon.c:443 #, c-format msgid " %.250s (version %.250s) is to be installed.\n" msgstr "" #: src/depcon.c:468 #, c-format msgid " %.250s (version %.250s) is present and %s.\n" msgstr "" #: src/depcon.c:495 #, c-format msgid " %.250s provides %.250s and is to be installed.\n" msgstr "" #: src/depcon.c:537 #, c-format msgid " %.250s provides %.250s and is present and %s.\n" msgstr "" #: src/divertcmd.c:50 msgid "Use --help for help about diverting files." msgstr "" #: src/divertcmd.c:66 src/statcmd.c:57 utils/update-alternatives.c:80 #, c-format msgid "Debian %s version %s.\n" msgstr "" #: src/divertcmd.c:75 src/main.c:63 src/querycmd.c:603 src/statcmd.c:65 #: src/trigcmd.c:55 dpkg-deb/main.c:57 dpkg-split/main.c:51 #: utils/update-alternatives.c:89 #, c-format msgid "" "This is free software; see the GNU General Public License version 2 or\n" "later for copying conditions. There is NO warranty.\n" msgstr "" #: src/divertcmd.c:87 src/main.c:81 src/querycmd.c:615 src/statcmd.c:77 #: dpkg-deb/main.c:69 dpkg-split/main.c:63 utils/update-alternatives.c:97 #, c-format msgid "" "Usage: %s [