debian/0000775000000000000000000000000012311315255007166 5ustar debian/lirc.manpages0000664000000000000000000000002412311234255011630 0ustar debian/irman2lirc.1 debian/changelog0000664000000000000000000024327512311315245011054 0ustar lirc (0.9.0-0ubuntu5) trusty; urgency=medium * debian/lirc.postinst, debian/lirc.templates, debian/po: drop a number of debconf templates that are no longer being prompted for at all due to the dropping of the lirc-modules-source package and the lirc.config some time ago. * debian/lirc.postinst: clean up the remaining debconf handling to not override settings in /etc/lirc/hardware.conf. * debian/lirc.postinst: drop code for removing /var/log/lircd, which has been gone for more than a decade. * fix blacklist handling, which creates files not used by modprobe, and doesn't put all the contents in a single file. * drop obsolete Ubuntu migration code that dates from jaunty and lucid. * fix a bug that causes transmitter device/driver settings to always be cleared on config change. * Adjust lircd handling for multiple devices so that events for all of them will appear on /dev/lircd as intended. Thanks to Joel Ebel for the patch. LP: #697999. * Use /run/lirc, the canonical name for /var/run/lirc. LP: #474701. * Fix the init script to not report failures when stopping an already-stopped daemon. -- Steve Langasek Sun, 16 Mar 2014 05:35:47 -0700 lirc (0.9.0-0ubuntu4) trusty; urgency=medium * Use dh-autoreconf for current libtool. -- Steve Langasek Sun, 15 Dec 2013 16:15:06 -0800 lirc (0.9.0-0ubuntu3) quantal; urgency=low * Add an option to prevent disabling in-kernel IR device support while lirc is running (LP: #1038371) -- Joel Ebel Mon, 17 Sep 2012 12:02:34 -0400 lirc (0.9.0-0ubuntu2) quantal; urgency=low * Fix path to modules in lirc.postinst (LP: #1004239) -- Joel Ebel Wed, 08 Aug 2012 01:28:48 -0400 lirc (0.9.0-0ubuntu1) oneiric; urgency=low * New upstream version (0.9.0) * Drop lirc-modules-source (LP: #778026) * Change to v3 package (quilt) * debian/control: - Build-deps on newer debhelper - bump standards version. * debian/compat: - Bump to 7 * Drop Patches: - debian/patches/13-warning-cleanup - debian/patches/define_current_cpu_data.patch - debian/patches/lirc-in-kernel-ioctls.patch - debian/patches/updated-driver-names.patch * Move extra remotes to our remotes DB. * debian/rules: - Remove references to quilt (as it's source package that does it now) - remove deprecated dh_clean -k -- Mario Limonciello Thu, 05 May 2011 14:45:59 -0500 lirc (0.8.7-0ubuntu4.1) natty-proposed; urgency=low [ Ernst Sjöstrand ] * For disabling other protocols, adjust to the new location in 2.6.37. (LP: #698208) -- Mario Limonciello Mon, 25 Apr 2011 12:52:38 -0500 lirc (0.8.7-0ubuntu4) natty; urgency=low [Ernst Sjöstrand] * update init script for /sys change in natty kernels (LP: #698208) -- Scott Moser Fri, 18 Mar 2011 16:26:14 -0400 lirc (0.8.7-0ubuntu3) natty; urgency=low * debian/patches/define_current_cpu_data.patch: fix undeclared current_cpu_data in lirc-modules-source (LP: #726182) -- BeeHock Goh Mon, 13 Mar 2011 17:37:25 +0100 lirc (0.8.7-0ubuntu2) natty; urgency=low * configure for devinput should show contents of /dev/input/by-id (LP: #695767) -- BeeHock Goh Thu, 03 Mar 2011 17:37:25 +0100 lirc (0.8.7-0ubuntu1) natty; urgency=low * Use 0.8.7 final version -- Robert Ancell Tue, 18 Jan 2011 11:42:19 +1100 lirc (0.8.7~pre3-0ubuntu2) natty; urgency=low * No-change upload to reduce changelogs. -- Martin Pitt Mon, 13 Dec 2010 12:47:14 +0100 lirc (0.8.7~pre3-0ubuntu1) maverick; urgency=low * Update to 0.8.7~pre3 snapshot. * Update lirc postinst to reference the right directory when unloading modules. * Don't show init script errors if no remote is plugged in. * Refresh lirc-in-kernel-ioctls.patch. (LP: #600739) * Build-depends on portaudio19-dev (LP: #567556) -- Mario Limonciello Sat, 04 Sep 2010 18:38:49 -0500 lirc (0.8.7~pre2-0ubuntu1) maverick; urgency=low * Update to 0.8.7~pre2 - Fixes issues with lirc on maverick. (LP: #620498) * Add lirc-in-kernel-ioctls.patch to use ioctls from the kernel for drivers. * Drop patches upstream now: - debian/patches/appleir_repeat_issue.patch - debian/patches/hauppauge-tv-card.patch - debian/patches/lirc-i2c-2.6.patch - debian/patches/lirc_dev-2.6.33.patch * Add updated-driver-names.patch * Refresh patches: - debian/patches/02_Makefile.in - debian/patches/13-warning-cleanup * Update extra transmitter and remote databases to not reference atiusb. * debian/control: - Update branches to be owned by ~mythbuntu-dev * Disable in-kernel-support when starting lircd, and re-enable when stopping. -- Mario Limonciello Fri, 02 Apr 2010 15:06:19 -0500 lirc (0.8.6-0ubuntu5) maverick; urgency=low * Add hauppauge-tv-card.patch to fix detection of Hauppauge TV Card as Leadtek IR (LP: #550369) -- Benjamin Drung Sat, 08 May 2010 23:59:53 +0200 lirc (0.8.6-0ubuntu4) lucid; urgency=low [ Mario Limonciello ] * debian/patches/lirc-i2c-2.6.patch: - Fixes building lirc-i2c on kernel 2.6.32 (LP: #513042) * Enable building wpc8769l module. Thanks Greg Vickers. (LP: #508266) * debian/patches/lirc_dev-2.6.33.patch: - Fixes lirc_dev to work with 2.6.33 as well. Useful for people who use the kernel mainline PPA. (LP: #529514) - Thanks RK & MarkRandolph. * debian/patches/appleir_repeat_issue.patch: - Fix apple IR key repeat issue by backporting patch from LIRC CVS. (LP: #440466) - Thanks Chase Douglas for sharing this patch. [ Jeremy Yoder ] * Fix /regression in /etc/init.d/lirc where if both REMOTE and TRANSMITTER are selected the symlinks /dev/lircd and /dev/lircd1 both point to /var/run/lirc/lircd. * Fix related bug where if the user sets TRANSMITTER_SOCKET in hardware.conf a "1" is appended even though it doesn't need to be. -- Mario Limonciello Sun, 28 Mar 2010 00:12:34 -0500 lirc (0.8.6-0ubuntu3) lucid; urgency=low * rebuild rest of main for armel armv7/thumb2 optimization; UbuntuSpec:mobile-lucid-arm-gcc-v7-thumb2 -- Alexander Sack Sun, 07 Mar 2010 00:56:06 +0100 lirc (0.8.6-0ubuntu2) karmic; urgency=low [ Jean-Yves Avenard ] * Add Antec Veris RM100 and RM200 to list of available remotes [LP # 453693] -- Jean-Yves Avenard Sat, 17 Oct 2009 14:53:03 +1100 lirc (0.8.6-0ubuntu1) karmic; urgency=low [ Jeremy Yoder ] * Update to LIRC 0.8.6 release. (LP: #432678) - added support for ENE KB3926 revision B/C/D (ENE0100) CIR port (found on some notebooks, e.g: Acer Aspire 5720G, HP Pavilion dv5) (Maxim Levitsky) - New parameter for lircd: --repeat-max - merged 1st-gen mceusb device support into lirc_mceusb2, renamed lirc_mceusb2 to lirc_mceusb - added support for putting iMON receviers into MCE/RC6 mode - added input subsystem mouse device support to iMON driver - improved iMON driver to handle dual-interface iMON devices via a single lirc device, reducing configuration complexity - added support for more iMON devices, including proper support for touchscreen iMON devices (Rene Harder) - improved iMON driver including touchscreen support - Linux input support added to lircmd - added support for IT8720 CIR port - added support for XMP protocol * Cleanup more_remotes.hwdb * TODO: Make changes to the "lircd.conf.atiusb" and "lircd.conf.hauppauge" files PATCHES instead of duplicates * TODO: Submit "lircd.conf.atiusb" and "lircd.conf.hauppauge" file patches upstream again * Changed lirc init script to create socket in /var/run/lirc/lircd as is the new default, but also create a symlink /dev/lircd to point to it. This makes all clients happy, old and new. * Fix bug in dkms.conf.in, forgot to increment array number when adding ene0100 driver. * Added the extra "Debian-only" remotes and transmitters back in, but in a different way. I created a subdirectory "debian/extras" and copy that to /usr/share/lirc/extras. This avoids patching the source. NOTE: CONFIG FILES IN BOTH LOCATIONS WILL USE THE "extras" VERSION. DUPLICATE LINES IN lirc.hwdb AND extras/remotes.hwdb WILL USE THE extras/remotes.hwdb VERSION. TRY TO AVOID THIS. * Added support to build new ene0100 driver * Update debian/lircd.init.d to reflect new default PID location in /var/run/lirc * Update debian/lircd.init.d to force socket to /dev/lircd rather than the new default of /var/run/lirc/lircd * Add support for new lirc-extras package to debian/lirc.postinst * Remove /etc/lircd.conf link to /etc/lirc since 0.8.6 defaults to /etc/lirc/lircd.conf now * Drop 04_man_pages patch, included in upstream * Drop 16_lirc-gpio in favor of a sed line in debian/rules * Drop 28_irrecord_resume_support - Doesn't work according to upstream * Drop 36_remove_extra_tekram in favor of a minor tweak to debian/lirc.postinst to ignore duplicates * Drop extra remote control/transmitter patches, move to lirc-extras: - 21_atiusb - 22_hauppauge_novat_500 - 23_remove_md8800 - 24_freecom_dvbt - 26_transmitter_lircd.conf - 30_medion_md1_remote - 31_hauppauge_hvr_1100 - 32_radioshack_15_2116_remote - 33_asus_mycinema_remote - 34_nebula_digitaltv_remote - 35_general_deviniput - 37_msi_tv_anywhere - 38_encore_enltv * Cleaned up a few lintian warnings [ Mario Limonciello ] * lirc.init.d: - Merge a bunch of whitespace cleanup from debian. * control: - Merge whitespace cleanup from debian. - Drop breaks on udev. We don't have any older version of udev in karmic. * copyright: - Sync from debian. * watch: - Sync from debian. * links: - Don't link to a transmitterdb, this should be provided by lirc-extras. * rules: - Install extra changelog, as mentioned in debian's debian/rules. * dkms.conf.in: - Drop bashisms. (LP: #445175) * lirc.postinst: - On upgrades from earlier versions, require the user to reconfigure their remote and transmitter. * lirc-modules-source.postinst: - Update to use the DKMS common postinst template. -- Mario Limonciello Mon, 12 Oct 2009 21:16:10 -0500 lirc (0.8.5-0ubuntu3) karmic; urgency=low * Fix bug in init script. Thanks Olaf! (LP: #391726) -- Mario Limonciello Wed, 24 Jun 2009 19:42:45 -0500 lirc (0.8.5-0ubuntu2) karmic; urgency=low * Drop patch that upstream won't be accepting: - 20_serial_igor * Drop patches included upstream: - 23_pad2keys (see http://brakemeier.de/electronics/vdr/lirc-imon.html 2009-04-10 entry for more information) * debian/lirc.postinst: - Drop serial igor references. * Refresh following patches: - 32_radioshack_15_2116_remote -- Mario Limonciello Tue, 23 Jun 2009 00:40:09 -0500 lirc (0.8.5-0ubuntu1) karmic; urgency=low * New upstream version. (LP: #383446) - Fixes imon support (LP: #283317) * Refresh the following patches for new version: - debian/patches/04_man_pages - debian/patches/13-warning-cleanup - debian/patches/21_atiusb - debian/patches/23_pad2keys - debian/patches/28_irrecord_resume_support - debian/patches/35_general_deviniput * debian/control: - Add build-depends on libftdi-dev to prevent FTBFS. * debian/copyright: - Update to what debian is shipping. * debian/modules-source/{lirc-modules-source.conf, Makefile} - Don't build cmdir anymore. It's now a userspace module * debian/rules: - Generate dkms.conf using sed instead. * debian/patches/12_pvr150_transmit_support: - Drop. Upstream didn't like this patch due to questionable copyright, and we aren't properly supporting it anyway. - Refresh 20_serial_igor - Refresh 26_transmitter_lircd * debian/lirc-modules-source.README.Debian: - Drop, inaccurate now. * debian/lirc.init.d: - Cleanup a useless for loop. -- Mario Limonciello Thu, 18 Jun 2009 01:48:20 -0500 lirc (0.8.4a-0ubuntu5) jaunty; urgency=low * When in noninteractive mode, don't set the old and new remotes or transmitters identically. Causes out of sync issues when changing remotes. (LP: #281575) -- Mario Limonciello Fri, 17 Apr 2009 01:32:01 -0500 lirc (0.8.4a-0ubuntu4) jaunty; urgency=low [ Mario Limonciello ] * debian/lirc.fdi: - Add Budget-CI dvb ir receiver. (LP: #329793) * debian/control: - Add setserial to depends. (LP: #341213) * debian/lirc.init.d: - Remove erroneous -k from modprobe call. (LP: #344781) * debian/lirc-modules-source.postrm: - Remove extra purge call removing lirc-modules-source.conf (LP: #350152) * debian/lirc.postinst: - Rename etc/modprobe.d/lirc-serial to append a .conf (LP: #350949) [ Kenny Millington ] * debian/patches/12_pvr150_transmit_support: - Fix compilation for latest kernels (LP: #306346) [ Gregory Lardiere ] * Add support for ite8709 and ttusbir for lirc-modules-source. (LP: #323923) - debian/rules - debian/modules-source/Makefile - debian/modules-source/lirc-modules-source.conf -- Mario Limonciello Mon, 30 Mar 2009 23:49:41 -0500 lirc (0.8.4a-0ubuntu3) jaunty; urgency=low * debian/udev.rules: Rename to debian/lirc.udev * debian/rules: Use dh_installudev rules to install * debian/lirc.install: Remove install line for udev rules * debian/control: Bump dep on debhelper to install to new path, add Breaks on udev to ensure we get the correct version -- Scott James Remnant Mon, 12 Jan 2009 20:39:34 +0000 lirc (0.8.4a-0ubuntu2) jaunty; urgency=low * debian/lirc.postinst: - Properly quote includes. The syntax of the include patch unfortunately changed as it landed upstream. - Migrate people from earlier LIRC versions to new include syntax if it is detected in their LIRC configuration. -- Mario Limonciello Wed, 12 Nov 2008 09:51:29 -0600 lirc (0.8.4a-0ubuntu1) jaunty; urgency=low * New upstream version. * Drop no longer necessary patches: - 03_extra_files - 25_upstream_2.6.27 - 27_multiple_include * Update patches for new version: - 12_pvr150_transmit_support - 16_lirc_gpio - 26_transmitter_lircd.conf - 28_irrecord_resume_support * New patches: - 38_encore_enltv.dpatch (LP: #274087) * debian/lirc.fdi: - Update FDI file to match a few more remotes reported on bugs that work when keyed. (LP: #164627, #204960, #279472) * debian/control: - Update Recommends for lirc-modules-source * debian/lirc.preinst: - Remove old calls that will no longer be encountered in package upgrades. * Merge some packaging changes from Debian. They hadn't done a release in a long time, so this will at least get us closer to their packaging for an overarching goal of being in sync. - Sync'ed changes: + debian/compat + README.Debian + debian/copyright + debian/doc-base.lirc + debian/liblircclient-dev.install + debian/lirc-modules-source.postrm + debian/lirc.postrm + debian/po + debian/lirc-svga.install + debian/lirc-svga.links + drop debian/lirc.config.in + drop debian/lirc.config.md5sum + drop debian/lirc.modules - Merge debian/control, remaining changes: + We don't share same VCS + We recommend udev + Our lirc-modules-source uses DKMS - Merge debian/rules, remaining changes: + DKMS support - Merge debian/liblircclient0.pc, remaining changes: + Version number we have is higher - Merge debian/lirc.install, remaining changes: + We install udev rules + We install an FDI file - Merge debian/lirc.templates, remaining changes: + Some of our keys are named differently because we differentiate between a remote and a transmitter device. + We've got some extra keys for details of devices. - Merge debian/lirc.init.d, remaining changes: + We've pretty much entirely revamped the file. Our deltas will need to be submitted incrementally to Debian. - Merge debian/lirc.postinst, remaining changes: + We've pretty much entirely revamped the file. Our deltas will need to be submitted incrementally to Debian. - Merge debian/rules, remaining changes: + We install a udev rule + We install an FDI file + We install DKMS support + We install transmitter lircd.conf's + We Install the remote and transmitter hwdb explicitly - Merge patches that we took from debian for 0.8.4 support: + debian/patches/02_Makefile.in + debian/patches/04_man_pages -- Mario Limonciello Sat, 08 Nov 2008 19:10:50 -0600 lirc (0.8.3-3) unstable; urgency=low * update swedish translation, thanks to Martin Bagge (Closes: #491772). * add italian debconf translation, thanks to Vincenzo Campanella . * silence LIRC_MODE_LIRCCODE log message, as it is not rate limited and tends to overflow syslog in case IR receivers get removed without stopping lirc or removing the configuration; this is a temporary band-aid for lenny and no long term solution (Closes: #500421). -- Stefan Lippers-Hollmann Tue, 30 Sep 2008 01:28:27 +0200 lirc (0.8.3-2) unstable; urgency=medium * remove dead code (modutils has only been used for kernel 2.4 and the affected code blocks weren't reachable since 0.8.3-1 anyways, as the conffile wasn't shipped in the first place). * conflict with makedev << 2.3.1-88, lirc either needs a fixed version or none at all (Closes: #477063). * 0.8.3-1 hasn't transitioned to testing yet, so keep the urgency at medium as it fixes several serious bugs (oops in lirc_i2c on kernel 2.6.25, FTBS against 2.6.26, missing module versions rejected by kernel >= 2.6.26, custom mknod replaced by proper makedev calls, if installed). -- Stefan Lippers-Hollmann Wed, 16 Jul 2008 13:35:32 +0200 lirc (0.8.3-1) unstable; urgency=medium [ Stefan Lippers-Hollmann ] * new upstream release 0.8.3 (Closes: #481649). * rediff patches: - 02_Makefile.in - 04_man_pages - 05_non_linux - 06_libtool_kfreebsd * drop patches merged upstream: - 16_kcompat-2.6.23 - 17_kcompat-2.6.24 - 20_kcompat-2.6.25 - 19_enable-macmini-as-userspace-driver * remove local scope definition for variables in lirc.init.d following SUSv3, its current use for MODULES_MISSING and ARGS doesn't justify making use of the exceptions specified in Debian policy 10.4 (Closes: #471422). * fix copy and paste error in lirc-modules-source.README.Debian. * lirc_i2c: fix kernel oops on 2.6.25, patch taken from upstream CVS. * change debconf defaults for lirc-modules-source: - drop lirc_gpio, it is affected by API changes in bttv and FTBS since 2.6.23. - enable atiusb. - enable bt829. - enable cmdir. - enable igorplugusb. - enable imon. - enable it87. - enable mceusb/ mceusb2. - keep lirc_parallel disabled, it is not SMP safe. - enable sasem. - enable streamzap. - enable sir, keep the defaults at generic sir controller (other) port 0x2f8 and irq 3, which seems to be supported by a short poll among notebook owners. - enable serial, keep defaulting to generic (home-brewed) IR receivers, change to ttyS0 (port 0x3f8, irq 4) as most concurrently sold systems only ship one serial port. * replace custom mknod usage by using makdev's newly added lirc support and add a versioned dependency on a fixed makedev version instead. This dependency can be relaxed to udev | makedev, once makedev (>= 2.3.1-88) has been shipped in a stable release. Given that Breaks support isn't usable until lenny+1, this conservative approach is the safer variant for etch --> lenny upgrades (Closes: #393575, #477063). * drop debian/lirc.config.in, which was added as a bandaid for #329897 alltogether, neither it nor setup-driver.sh are used anywhere on the end user's system; this allows dropping the pre-dependency on dialog and lirc.config.md5sum as well. * add a sanity check to debian/rules' clean target to ensure that liblirclient0's pkg-config file is up to date. * add compatibility code for udev >= 0.117, avoid flag day changes or a hard dependency on udev; inspired by Scott James Remnant (Closes: #456325). * restructure lirc-modules-source package to dump all module sources directly into the toplevel directory (omit upstream's Makefiles from module subdirectories) and replace custom toplevel Makefile with a simple in-kernel style buildsystem. This fixes symbol versioning for the kernel modules and, as a side effect, the clean target of the top-level Makefile and doesn't allow empty port/ IRQ settings. (Closes: #450521, #483089, #369076) * add compatibility patch for kernels >= 2.6.26, based on upstream CVS. * drop debian/lirc.modules, modutils is obsolete (kernel 2.4). * make lirc-modules-source compatible with linux-modules-extra-2.6: - use bzip2 to compress the source tarball. - change path names to correspond with the package name. * fix LIRC_IRQ redefinition. [ Matthew Johnson ] * Add pkg-config file (Closes: #421881) [ Sven Mueller ] * Add swedish translation (Closes: #483766) [ Matthew Johnson ] * Raise priority to medium since it fixes kernel-related bugs -- Matthew Johnson Tue, 15 Jul 2008 18:56:26 +0100 lirc (0.8.3-0ubuntu2) intrepid; urgency=low * debian/patches/25_upstream_2.6.26.patch: - Fix lirc-modules-source compilation on 2.6.26 by pulling some patches from CVS (LP: #247233) * debian/rules: - Install original modules back into proper location for intrepid kernel (LP: #242216) * debian/patches/37_msi_tv_anywhere.dpatch: - Create patch for supporting MSI TV @anywhere remote. (LP: #241830) * debian/lirc.postinst: - Correct path to look for module in Intrepid. - Ask for a path when using dvico remotes. (LP: #238032) - Don't accidentally overwrite lircd.conf and hardware.conf when things haven't really changed at all. (LP: #206609) * debian/lirc.init.d: - Don't allow udev to put us into endless spinning loops. Instead pray that module hotplugging worked for all things USB. (LP: #269743) * debian/lirc.fdi: - Include this FDI file to prevent in kernel support for the saa7134 when LIRC is installed. (LP: #204960, #164627) * debian/rules: - Install FDI file. * debian/lirc.install: - List FDI file. * debian/patches/22_hauppauge_novat_500.dpatch: - Adapt to include alternative numeric keys. (LP: #224080) * debian/patches/25_upstream_2.6.27.dpatch: - Update to content that is currently sitting in Ubuntu GIT tree. -- Mario Limonciello Wed, 24 Sep 2008 12:02:17 -0500 lirc (0.8.3-0ubuntu1) intrepid; urgency=low * New upstream version. * Drop 05_fix_cmdir as it's now included in CVS. * Update 12_pvr150_transmit_support for configure script changes. * Update 13-warning-cleanup to change from whitespace changes from CVS. * Update 16_lirc-gpio for changes from CVS. * Update 23_pad2keys for changes from CVS. * Update 24_freecom_dvbt for changes from CVS. * Drop 25_upstream_2_6_24 as it's now included from CVS. * Drop 29_macmini_repeat as it's now included from CVS. * Update 30_medion_md1_remote for changes from CVS. * Update 33_asus_mycinema_remote for changes from CVS. * Update 23_pad2keys patch to properly work (LP: #153184) * Update 21_atiusb.dpatch because it's half upstream now (LP: #213549) * Add 23_remove_md8800 as the MD8800 remote is causing problems. (LP: #213549) * debian/modules-source/lirc-modules-source.conf: - Default the mode to be w/ soft carrier. (LP: #182530) * Update 31_hauppauge_hvr_1100 to use the right devinput driver instead. (LP: #206495) * Add 34_nebula_digitv.dpatch for supporting the Nebula Digitv remote (LP: #164867) * Add 35_general_devinput.dpatch for generic devinput devices. (LP: #235811) * Add 36_remove_extra_tekram.dpatch for removing extra option in lirc.hwdb. This option was causing lots of failures (LP: #211566) * debian/{modules-source/Makefile,rules}: - Allow the kernel version to be passed as an argument. prevents broken upgrades when the kernel ABI revs (LP: #218955) * debian/lirc-modules-source.prerm: - Check for both remove and upgrade. -- Mario Limonciello Sat, 10 May 2008 16:07:40 -0500 lirc (0.8.3~pre1-0ubuntu7) hardy; urgency=low [ Mario Limonciello ] * Fix a logical error in the init script related to udev preventing it from working. (LP: #176616) * Fix race conditions with udev (LP: #204672) * Backup hardware.conf before changing. (LP: #198903) * Add support for the Medion MD1-NBC remote. (LP: #192392) - Thanks Florian Fahr * Add support for the Hauppauge HVR-1100 remote (LP: #203493) - Thanks Lucas * Flag repeat events on apple mac mini (LP: #179608) - Thanks Don Mahurin * Add support for Radioshack 15-2116 remote (LP: #193568) - Thanks Scott D * Add support for ASUS MyCinema P7131 remote (LP: #190018) - Thanks Gianfranco Liporace [ Mathias Hasselmann ] * Add 28_irrecord_resume_support for resume support to irrecord. (LP: #197493) [ Andrew Barbaccia ] * Fix typo in lirc init script preventing transmitter arguments from properly being built. (LP: #204664) * Update Scientific Atlanta config in 26_transmitter_lircd.conf.dpatch to better naming convention. (LP: #204342) -- Mario Limonciello Sun, 23 Mar 2008 23:25:36 -0500 lirc (0.8.3~pre1-0ubuntu6) hardy; urgency=low * "Include" proper URL for transmitters in lircd.conf. * debian/control: - lirc-modules-source depends on dkms. - Update standards version to 3.7.3 - Drop ucf, debianutils, debhelper from lirc-modules-source depends. - Update lirc-modules-source description. * Update lirc-modules-source behavior to automatically build modules using dkms as necessary. (LP: #181871) * Drop old lirc-svga stuff. * Update 12_pvr150_transmit_support.dpatch with patch from author. -- Mario Limonciello Sun, 10 Feb 2008 15:04:13 -0600 lirc (0.8.3~pre1-0ubuntu5) hardy; urgency=low * debian/hardware.conf: - Add a variable to only force noninteracive reconfiguration when requested by user. * debian/lirc.postinst: - Add support for "Custom" remote type which will not overwrite chosen options when reconfiguring (even noninteractively). * debian/templates: - Add "Custom" remote and transmitter. * Update 13_warning_cleanup, 16-lirc-gpio, and 24_freecom_dvbt to update lirc.hwdb from extraneous equals signs and information. -- Mario Limonciello Thu, 03 Jan 2008 11:47:14 -0600 lirc (0.8.3~pre1-0ubuntu4) hardy; urgency=low * Add 25_upstream_2_6_24 to fix lirc_dev,lirc_serial,lirc_sir on 2.6.24. * Add 26_transmitter_lircd.conf for pre-shipped cable/satellite receiver lircd.conf's as well as a transmitter.hwdb * Add 27_multiple_include for allowing lircd.conf's via an 'include' directive. * Update 16_lirc-gpio, 22_hauppauge_novat_500, 24_freecom_dvbt for upstream driver name change from dev/input to devinput. * Drop 17_devinput since it is no longer necessary due to upstream driver name change. * Update 12_lirc_pvr150 for 2.6.24. * Update 20_lirc_serial_igor for 2.6.24. * Update 13-warning-cleanup for more cleanup on sir * Update 03_extra_files, 04_manpages, 12_pvr150_transmit_support, 13-warning-cleanup, 16_lirc-gpio, 20_serial-igor, 21_atiusb, 22_hauppauge_novat_500, 23_pad2keys, 24_freecom_dvbt to give a description of the patches. * debian/control: - Have lirc depend on setserial, so that lirc.postinst can customize things. (LP: #152871) * debian/lirc.links: - Add symlink from /etc/lirc/lircd.conf -> /etc/lircd.conf to prevent confusion for users coming from different distros. - Add symlink for transmitter.hwdb to different share directories. * debian/hardware.conf - Change top level remotes, drivers, etc to be remote specific. - Add support for transmitters. - Default to having lircd off until the maintainer scripts have updated things. * debian/lirc.init.d: - Reorder checking for hardware.conf, to make sure it occurs earlier. - Update init script to use LSB output. - Update init script to have the ability to spawn multiple lirc processes. * Drop devfs.conf and devfs.devices since devfs is no longer used in Ubuntu. * debian/rules: - No longer install devfs.conf and devfs.devices. - Install transmitter.hwdb - Install usr/share/lirc/transmitters * debian/lirc.templates: - Add extra templates for our chosen transmitter, device, driver, modules, and lircd_conf - Update all old device, driver, modules, and lircd_conf templates to be for remote only. - Remove extra space from remote template. - Add template for whether to enable/disable lircd. - Add a template for serial port selection (LP: 152871) * debian/lirc.postinst: - Unload all modules when issuing a reconfigure command. - In check_hardware_conf, don't write UNCONFIGURED, just write empty quotes to make sure we don't throw things off. - In check_hardware_conf, write out all our new modules as necessary. - In Save & DebconfLoad, read and store all new transmitter variables. - In ChooseRemote, read old values from hardware.conf rather than debconf, since debconf is not designed to be used as a database, but rather an intermediatary storage method. - In ChooseRemote, add transmitter support. - In ChooseRemote, define what lirc device we are using for dev/input as described in: https://blueprints.launchpad.net/mythbuntu/+spec/lirc-gpio-alternative - Remove clause to mv /etc/lircd.conf to /etc/lirc - Write out START_LIRCD, depending on whether we have remotes/transmitters enabled or disabled. - Check for REMOTE_DRIVER entitled 'none' and set it to ''. - Write out a lircd.conf with include directives and a description of how to update rather than copying the single file over. - Add support to customize serial port (LP: #152871) - No longer setup modutils (only applicable for kernel 2.4) * debian/lirc.preinst: - Migrate old hardware.conf over to new syntax in case user does not replace it upon package installation. -- Mario Limonciello Thu, 27 Dec 2007 23:16:40 -0600 lirc (0.8.3~pre1-0ubuntu3) hardy; urgency=low * Fix -x call. -- Scott James Remnant Fri, 14 Dec 2007 16:53:50 +0000 lirc (0.8.3~pre1-0ubuntu2) hardy; urgency=low * debian/lirc.init.d: call udevadm instead of udevsettle -- Scott James Remnant Fri, 14 Dec 2007 16:30:11 +0000 lirc (0.8.3~pre1-0ubuntu1) hardy; urgency=low * New upstream version. - Includes Iguanaworks IR Support (LP: #153457) * Update 03_extrafiles patch for gpio changes. * Update 05_fix_cmdir patch for command IR lirc.hwdb update. * Update 12_lirc_pvr150 patch for transmitting support under kernel 2.6.22. * Update 13-warning-cleanup patch for items that were already cleaned up upstream. * Drop 14_mceusb2 patch since now included upstream. * Drop 14_lirc-i2c patch since now included upstream. * Drop 15_macmini patch since now included upstream. * Update 16_lirc-gpio patch for added changes upstream. * Update 17_devinput patch for added changes upstream. * Drop 18_irman-fix patch since now included upstream. * Drop 19_serial_support patch since now included upstream. * Update 20_serial_igor patch for new serial support upstream. * Update 22_hauppauge_novat_500 patch for new support upstream. * Add 23_pad2keys patch for pad2keys imon support (LP: #153184). * Add 24_freecom_dvbt patch for NovaT 500 Remote (LP: #152539). * Clean up lintian warning for -$(MAKE). * Clean up lintian warning for ${source:Version}. -- Mario Limonciello Tue, 30 Oct 2007 09:44:55 -0400 lirc (0.8.2-0ubuntu8) gutsy; urgency=low * Add 22_hauppauge_novat_500.dpatch for more complete novat-500 support. (LP: #145847) * Update 16_lirc-gpio.dpatch to make all lirc_gpio remotes use the dev/input interface instead. (LP: #148756) * Update 21_atiusb.dpatch to make Snapstream remotes have their own item. (LP: #140060) * Update 12_pvr150_transmit_support.dpatch to fix a m-a related FTBFS. (LP: #147440) -- Mario Limonciello Mon, 08 Oct 2007 02:35:50 -0500 lirc (0.8.2-0ubuntu7) gutsy; urgency=low * Be sure to rmmod ati_remote.ko if necessary (LP: #140940) -- Mario Limonciello Thu, 20 Sep 2007 10:06:20 -0500 lirc (0.8.2-0ubuntu6) gutsy; urgency=low * Add 20_serial_igor.dpatch for additional serial kernel module that is built with Igor Cesko support. (LP: #138247) * debian/patches/21_atiusb.dpatch: - for support of first generation ATI RF remote. (LP: #139238) - snapstream firefly support. (LP: #140060) * debian/lirc.postinst, debian/lirc.postrm, debian/lirc.templates: - Blacklist lirc_atiusb.ko when necessary (LP: #139961) * debian/rules, debian/lirc.preinst: - Update the service to start after alsa-utils (LP: #123557) -- Mario Limonciello Mon, 17 Sep 2007 01:56:54 -0500 lirc (0.8.2-0ubuntu5) gutsy; urgency=low [ Mario Limonciello ] * Add a udev script to automatically reload or stop lirc if /dev/lirc[0-9] devices are added/removed. * Modify lirc init script to work with udev script. * Update 14_lircmceusb2.dpatch to add support for HP MCEUSB2 remotes. (LP: #134949) * Add 19_serial_support.dpatch from lirc CVS to fix broken serial support. * debian/control: - Add udev to Recommends. * debian/lirc.postinst: - Add udev reloading. [ Tristan Hill ] * Fix irman support with dpatch from lirc CVS. (LP: #132011) -- Mario Limonciello Mon, 27 Aug 2007 21:11:49 -0500 lirc (0.8.2-0ubuntu4) gutsy; urgency=low * Clarify the intentions of choosing a remote (LP: #129038) * Add 17_devinput.dpatch to show correct DEVICE in doc/lirc.hwdb. (LP: #129689) * Write out REMOTE="" to lircd.conf as well to allow external apps to parse this information. -- Mario Limonciello Sun, 29 Jul 2007 13:39:17 -0500 lirc (0.8.2-0ubuntu3) gutsy; urgency=low * Add 14_lirc_i2c.dpatch to fix lirc-i2c on 2.6.22 kernel for PVR-150 and HVR-1300. (LP: #128650) * Add 15_macmini.dpatch to fix macmini support. (LP: #126955) * Add 16_lirc-gpio.dpatch to fix GPIO by backporting deprecated functions, until sysfs support is added to GPIO module. * debian/lirc.postinst & debian/lirc.templates: Add functionality to choose your remote. Automatically load this information into /etc/lirc/hardware.conf and choose a /etc/lirc/lircd.conf for your remote. (LP: #65174) -- Mario Limonciello Thu, 26 Jul 2007 19:47:03 -0700 lirc (0.8.2-0ubuntu2) gutsy; urgency=low * Make sure lirc_gpio is buildable by adding extra_2.6.22 to 03_extra_files.dpatch. (LP: #125384) * Add 05_fix_cmdir.dpatch from lirc CVS to fix cmdir linking issues. * Add a symbolic link in case /usr/share/doc/lirc/lirc.hwdb is being used. * Add 13_warning_cleanup.dpatch to cleanup all compilation warnings encountered before submitting to the ubuntu kernel team. -- Mario Limonciello Wed, 11 Jul 2007 21:18:46 -0500 lirc (0.8.2-0ubuntu1) gutsy; urgency=low * New upstream version. (LP: #124842) * Drop 01_irxevent.dpatch. Most of it is included upstream now. * Update 12_pvr150_transmit_support.dpatch for new configure script. * debian/rules: - Add lirc.hwdb to lirc binary package. * debian/lirc.postinst. - Remove all mknods. This is handled when modprobing. * debian/lirc.init.d - Add LSB block. -- Mario Limonciello Sun, 8 Jul 2007 20:55:36 -0500 lirc (0.8.1+cvs20070310-0ubuntu2) feisty; urgency=low [ Mario Limonciello ] * Add 12_pvr150_transmit_support.dpatch for pvr-150 ir transmitter support (Closes: #95768) * debian/lirc-modules-source.templates: add pvr150 module option here. * debian/modules-source/Makefile: add pvr150 build options. [ Kees Cook ] * debian/modules-source/Makefile: don't limit cleaning action, this causes rebuilds to fail when a kernel version gets bumped. * debian/patches: clean up unused patches. -- Kees Cook Wed, 4 Apr 2007 11:27:06 -0700 lirc (0.8.1+cvs20070310-0ubuntu1) feisty; urgency=low * New upstream release -- required for 2.6.20 kernels. * Dropping unneeded patches. -- Kees Cook Sat, 10 Mar 2007 12:25:58 -0800 lirc (0.8.0-9ubuntu2) feisty; urgency=low * Rebuild for changes in the amd64 toolchain. * Set Ubuntu maintainer address. -- Matthias Klose Mon, 5 Mar 2007 01:22:16 +0000 lirc (0.8.0-9ubuntu1) feisty; urgency=low * Merge from debian unstable, remaining changes: - drop svgalib support -- Scott James Remnant Tue, 28 Nov 2006 15:10:00 +0000 lirc (0.8.0-9) unstable; urgency=low * Rebuilding to fix and erroneous depend. (Closes: #393316, #393297, #393351) -- Hector Garcia Mon, 16 Oct 2006 11:18:21 +0200 lirc (0.8.0-8) unstable; urgency=low [ Hector Garcia ] * Added 09_lirc_drivers_2.6.18_compatibility patch by Thomas Creutz (Closes: #387715) * Fixed 03_extra_files to support 2.6.17 and 2.6.18. By Thomas Creutz (Closes: #387715, #378395) * Updated cs.po by Miroslav Jezbera. (Closes: #389248) * Added patch to lirc_i2c from upstream CVS. By Jim Heck * Added patch 11_cheklib_fix to remove extra depends. * Updated po/es.po [ Amaya Rodrigo Sastre ] * Use debian/compat instead of DH_COMPAT=4 in debian/rules. Thanks Guillem Jover for pointing this out. -- Amaya Rodrigo Sastre Tue, 10 Oct 2006 10:31:48 +0200 lirc (0.8.0-7) unstable; urgency=low * Update french debconf template (Closes: #384619) * Update logcheck file (Closes: #385025) -- Julien Danjou Mon, 18 Sep 2006 14:00:57 +0200 lirc (0.8.0-6) unstable; urgency=low [ Amaya Rodrigo Sastre ] * Added debconf templates translation update: - French (Closes: #370479). - Portuguese (Closes: #373129). - Dutch (Closes: #373828). - Japanese (Closes: #379937). * Use DH_COMPAT=4 in debian/rules. Got rid of debian/compat. * Added debconf-updatepo to de debian/rules clean target (Closes: 372911). [ Hector Garcia ] * Updated debian/patches/04_man_pages.dpatch -- Hector Garcia Fri, 18 Aug 2006 22:23:46 +0200 lirc (0.8.0-5ubuntu1) edgy; urgency=low * Merge from debian unstable, remaining changes: - drop dependency on svgalib. -- Scott James Remnant Mon, 10 Jul 2006 15:45:44 +0100 lirc (0.8.0-5) unstable; urgency=low [ Aurelien Jarno ] * debian/modules-source/debian/rules: simplify the call to dpkg-architecture. * debian/modules-source/debian/rules: take account of old dpkg-architecture output. (Closes: #371050). * debian/control: Recommends dpkg-dev (>= 1.13). Drop the recommends on dpkg (>= 1.13). [ Julien Danjou ] * Don't create udev queue in init script (Closes: #370745) -- Julien Danjou Sun, 11 Jun 2006 14:18:07 +0200 lirc (0.8.0-4) unstable; urgency=low * Wait for devices to be up using udevsettle (Closes: #362217) * Updated dutch po-debconf translation (Closes: #370218) * Fix lintian warning about lirc and lirc-modules-source templates -- Julien Danjou Sun, 4 Jun 2006 16:44:13 +0200 lirc (0.8.0-3) unstable; urgency=low [ Cyril Lacoux ] * Added 08_min_code_repeat.dpatch, to allow proper interpretation of repeat signals for Creative RM-900 (Closes: #367521). [ Aurelien Jarno ] * Updated German debconf templates translation. Thanks to Franz Pletz (Closes: #367874). -- Julien Danjou Tue, 23 May 2006 11:01:08 +0200 lirc (0.8.0-2) unstable; urgency=low [ Julien Danjou ] * Include etc/lirc in lirc-modules-source.dirs (Closes: #342568) * Fix compilation for non-root users (Closes: #297170) [ Aurelien Jarno ] * Updated German debconf templates translation. Thanks to Franz Pletz (Closes: #367274). * Fixed typos in debconf templates (Closes: #312498). -- Julien Danjou Tue, 16 May 2006 12:45:59 +0200 lirc (0.8.0-1) experimental; urgency=low [ Hector Garcia ] * New upstream release. (Closes: #349641, #352573) - Added support up to for 2.6.15 kernels. - dvico driver is enabled by default (Closes: #348753) * Removed 02_aclocal.dpatch, not needed anymore. * Ported 04_man_pages to this release. * Ported 01_irxevent.dpatch to this release. * Changed with-drivers to userspace to build only the userspace drivers and keep only the kernel-space on the modules package. * Added 02_Makefile.in.dpatch, to prevent autotools from getting run on every build. * Recompile with driver=userspace (Closes: #352767, #351723, #348390) [ Julien Danjou ] * Add lirc_dev dependency to it87 * Fix build-depends on libsvga1-dev rather than svgalibg1-dev (Closes: #350791) * Add lircrcd * Add a patch to allow some drivers to compile with linux 2.6.16 * Add patches from Cyril Lacoux - Compile all modules - Support 2 flavors for it87 (standard/digimatrix) - Improve debconf template - module-assistant works fine - Add missing files for gpio [ Aurelien Jarno ] * Added Swedish debconf templates translation. Thanks to Daniel Nylander (Closes: #339544) * Added Dutch debconf templates translation. Thanks to Kurt De Bree (Closes: #364033) * Enable lirc-svga on amd64. * Added support for non-Linux architectures: - Don't build-depends on libasound2-dev on hurd-i386, kfreebsd-i386 and kfreebsd-amd64. - Added 05_non_linux.dpatch, to make lirc buildable on non-Linux architectures. - Added 06_libtool_kfreebsd.dpatch, to update libtool for GNU/kFreeBSD. * Changed lirc-modules-source from Arch: any to Arch: all. -- Julien Danjou Wed, 10 May 2006 13:40:57 +0200 lirc (0.7.2-2) unstable; urgency=low * Ready for unstable. -- Hector Garcia Sun, 15 Jan 2006 03:58:59 +0100 lirc (0.7.2-1) experimental; urgency=low * New upstream release. (Closes: #310133) - support for KeySym and KeyCode in key definition - updated udev support for 2.6.13 kernels - added support for new version of Windows Media Center Remotes - Use all 8 bytes of IR code - Rewritten Sasem driver - added support for Asus Digimatrix - added support for Remotec Multimedia PC Remote BW6130 - Added support for iMON-PAD and iMON-RSC - Man page for lircd doesn't talk about the wrond -D flag (Closes: #301688) * Change build-depend to kernel-source. * Change configure option --with-drivers to none on debian/rules. * Separated build and configure stages. * Deleted useless patch 01_configure-duplicates.dpatch * Deleted obsolete patch 02_forgotten-files.dpatch * Rewrite of 03_irxevent.dpatch to new version and renamed to 01_... * Rename 04_aclocal.dpatch to 02_aclocal.dpatch * Changed mv to cp on modules-source/Makefile * Updated po/es.po * Runned debconf-updatepo. (Closes: #329200) * Updated cs.po, da.po, es.po, de.po (not all, only fuzzy), fr.po, ja.po and vi.po * Created 03_extra_files.dpatch so module compilation only depends on kernel-headers. (Only 2.6.12 currently since is the only one for 2.6.x in debian that is supported upstream. Custom kernels should still use kernel-source). * Deleted build-depend on kernel-source. * Added depend on ucf. * Added myself to uploaders and cleaned control file a bit. * Make dpkg-reconfigure work even when no /etc/lirc/lirc-modules.conf found (Closes: #342027) * Added support for udev. Applied patch from dann frazier. (Closes: #303494) * Added patch 04_man_pages.dpatch to fix hyphen-used-as-minus-sign problem. I should send this upstream soon. * Cleaned a few lintian warnings on maintainer scripts. -- Hector Garcia Thu, 5 Jan 2006 11:13:54 +0100 lirc (0.7.1pre2-11ubuntu1) dapper; urgency=low * Resynchronise with Debian. -- Michael Vogt Fri, 11 Nov 2005 00:15:47 +0100 lirc (0.7.1pre2-11) unstable; urgency=low * This upload sponsored by The Spanish Public Administration Department. * Debian Policy 10.7.3. ("[Conffiles] must not be modified by the maintainer scripts during installation (or at any other time). Apply wonderful patch from Nicolas Boullis . (Closes #334170). -- Amaya Rodrigo Sastre Mon, 17 Oct 2005 16:30:37 +0200 lirc (0.7.1pre2-10) unstable; urgency=low * The "Follow the white rabbit" Release. * Temporarily include upstream's complete setup-driver.sh into debian/lirc.config.in so as to temporarily fix this issue. Another temporary workaround is to install lirc-modules-source. See #329897. I suck. -- Amaya Rodrigo Sastre Mon, 10 Oct 2005 17:39:02 +0200 lirc (0.7.1pre2-9) unstable; urgency=low * Changed priority from optional to extra, learn to read, now change liblircclient's priority to optional. Hopefully end this absurd loop. -- Amaya Rodrigo Sastre Mon, 19 Sep 2005 18:19:06 +0200 lirc (0.7.1pre2-8) unstable; urgency=low * Changed priority from extra to optional, to get rid of override disparities. * Apply patch from zapdvb to irxevent, that also contains patch from #326703, making lirc more stable when used with cpu intensive applications like mplayer (Closes: #328697). * Apply japanese debconf translation (Closes: #302487). * Fixed fuzzy string in debconf .po files (Closes: #302430). Also updated es.po. * Corrected lirc-modules-source.conf so that it documents the right way to separate the list of drivers (should be space separated, not comma separated). (Closes: #312102). * libusb-dev is already listed in Build-Depends, so this bug should have been already fixed (Closes: #317158). * Find the kernel source by testing for $KSRC/include/linux/version.h. (Closes: #301590). -- Amaya Rodrigo Sastre Sun, 18 Sep 2005 11:55:30 +0200 lirc (0.7.1pre2-7) unstable; urgency=low * The "Kicked out from the MIA Team, by Debconf5 and RL meetings" Release. * Acknowledge bugs closed by previous NMU. Thanks Blars! (Closes: #315579, #318268, #312497, #301639, #302141). * Applied patch from Agustin Martin , fixing: - Get rid of unknown symbols when inserting lirc_sir.ko - Build when two drivers requiring lirc_dev are selected - Build the atiusb driver properly (Closes: #303663, #304609, #300989). * Apply patch supplied by Juergen Pfennig, making irxevent send keys to the right application. (Closes: #326703). * Apply patch from Robert Bihlmeyer to partially take care of #303078, while a more elegant solution is found. * Apply patch from Alban to correct spurious warning with aclocal >= 1.8. (Closes: #305291). * And last, but not least, make litian happy: - Get rid of some bashisms with help from Guillem Jover - Avoid deprecated use of chown (ie. s/root.root/root:root/). * Special thanks to J. Carlos Garcia Sogo for the quick tutorial on dpatch. -- Amaya Rodrigo Sastre Sat, 17 Sep 2005 20:47:15 +0200 lirc (0.7.1pre2-6.1) unstable; urgency=low * 0 day NMU for RC bug durring bug squishing party * remove unportable -v option from md5sum command in debian/rules (only one of the two md5sum programs in debian has it) (closes: #315579) * standards version 3.6.2 (no changes) * fix lirc-modules-source for dpkg 1.13, add versioned dpkg dependancy (closes: #318268) * Vietnamese debconf translation (closes: #312497) * add build-dependency on libxt-dev (closes: #301639, #302141) -- Blars Blarson Sat, 3 Sep 2005 00:12:27 +0000 lirc (0.7.1pre2-6) unstable; urgency=low * back to priority optional. I am really confused now :) -- Amaya Rodrigo Sastre Mon, 28 Mar 2005 23:10:45 +0200 lirc (0.7.1pre2-5) unstable; urgency=low * Now really close (Closes: #301570), instead of closing 301589 twice, now instead of looking for Rules.make or Makefile, we test for $KSRC/include/linux/version.h. Also (Closes: #199869). * Leave debian/liblircclient-dev.install alone (Closes: #301723). * Add french debconf template (Closes: #301825). -- Amaya Rodrigo Sastre Sun, 27 Mar 2005 23:12:16 +0200 lirc (0.7.1pre2-4) unstable; urgency=low * Remove liblirc_client.so.0.0.0 from debian/liblircclient-dev.install (Closes: #301589). * Do not look for Rules.make while building lirc-modules, as it is no longer shipped with kernels above 2.6.1x (Closes: #301589). * Changed priority optional from extra. -- Amaya Rodrigo Sastre Sun, 27 Mar 2005 01:45:14 +0100 lirc (0.7.1pre2-3) unstable; urgency=low * The "I love to do some lirc housekeeping now that we're really going to release Sarge" Release. * Make /etc/init.d/lirc point to more useful doc regarding howto configure lircd (Closes: #239196). * Fix makefile for lirc-modules-source so that ati_usb is properly built. Thanks to James Stark for the patch (Closes: #300989). * lirc 0.7.1 is now in testing and does build with 2.6 (Closes: #300587). * Fixed installatation tutorial typo mistake (Closes: #299647). * Lirc has been logging to syslog properly identifying itself probably for some time now (Closes: #164536). * Build depend on libusb-dev so that the userspace driver for ATI USB remotes (amongst others) is supported (Closes: #294248). * If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be automatically used instead (Closes: #197306). * s/auido/audio/g in debian/lirc.config, ChangeLog, setup.data and setup.sh. * Maybe (Closes: #290903) in debian/lirc.config. * Fixed manpage-section-mismatch in doc/man/lircd.8 and doc/man/lircmd.8. -- Amaya Rodrigo Sastre Fri, 25 Mar 2005 23:48:33 +0100 lirc (0.7.1pre2-2) unstable; urgency=low * Applied patch from Thomas Schmidt, thanks!. (Closes: #294720). -- Amaya Rodrigo Sastre Sat, 12 Mar 2005 00:01:46 +0100 lirc (0.7.1pre2-1) unstable; urgency=low * New upstream release (Closes: #294174). * s/serial_CFLAGS/SERIAL_CFLAGS/a in Makefile (Closes: #294689). * Added support for ati_usb modules (Closes: #297243). * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Thu, 10 Mar 2005 00:27:20 +0100 lirc (0.7.1pre1-2) unstable; urgency=low * The "And when it rains, it poures" Release. * Fixed the nasty "setup-driver.sh not found" bug, again. This fix also should fix the debconf freeze (Closes: #269833, #292637, #293091) Thanks to Chris Boyle for spotting the fix. * Included patch from "Eloy A. Paris" (Closes: #292043) so that lirc_dev gets shipped. * Partially included patch for Makefile from Yann Rouillard (Closes: #246112, #287328, ) so that correct modules and symbols get installed for 2.6.x kernels. * Improved paths in README.Debian (Closes: #218888). * Suggest just kernel-source and not headers (Closes: #250570). * It now builds with 2.6 kernels (Closes: #221023). I'm terrible with lirc bugs housekeeping :) * Newewst upstream versions fix i2c build problems (Closes: #256986). More housekeeping here. * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Tue, 25 Jan 2005 22:29:15 +0100 lirc (0.7.1pre1-1) unstable; urgency=low * New upstream release. -- Amaya Rodrigo Sastre Sun, 23 Jan 2005 02:51:59 +0100 lirc (0.7.0.1-2) unstable; urgency=low * The "I can't believe nobody reported a RC bug yet!" release. * Changed section from optional to extra to make installer@ftp-master happy. * Change short decriptions in order to comply with new lintian check. * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Sun, 23 Jan 2005 02:51:48 +0100 lirc (0.7.0.1-1ubuntu3) breezy; urgency=low * Build-Depends: libusb-dev (Bugzilla #14513) * GNU config automated update: config.sub (20041130 to 20050422), config.guess (20041112 to 20050422) -- root Tue, 20 Sep 2005 11:01:35 -0700 lirc (0.7.0.1-1ubuntu2) breezy; urgency=low * md5sum from coreutils doesn't have -v, so drop that for now. -- LaMont Jones Sat, 23 Jul 2005 13:33:16 -0600 lirc (0.7.0.1-1ubuntu1) hoary; urgency=low * remove svgalib1 Dependency completely. -- LaMont Jones Mon, 17 Jan 2005 14:05:26 -0700 lirc (0.7.1pre2-11) unstable; urgency=low * This upload sponsored by The Spanish Public Administration Department. * Debian Policy 10.7.3. ("[Conffiles] must not be modified by the maintainer scripts during installation (or at any other time). Apply wonderful patch from Nicolas Boullis . (Closes #334170). -- Amaya Rodrigo Sastre Mon, 17 Oct 2005 16:30:37 +0200 lirc (0.7.1pre2-10) unstable; urgency=low * The "Follow the white rabbit" Release. * Temporarily include upstream's complete setup-driver.sh into debian/lirc.config.in so as to temporarily fix this issue. Another temporary workaround is to install lirc-modules-source. See #329897. I suck. -- Amaya Rodrigo Sastre Mon, 10 Oct 2005 17:39:02 +0200 lirc (0.7.1pre2-9) unstable; urgency=low * Changed priority from optional to extra, learn to read, now change liblircclient's priority to optional. Hopefully end this absurd loop. -- Amaya Rodrigo Sastre Mon, 19 Sep 2005 18:19:06 +0200 lirc (0.7.1pre2-8) unstable; urgency=low * Changed priority from extra to optional, to get rid of override disparities. * Apply patch from zapdvb to irxevent, that also contains patch from #326703, making lirc more stable when used with cpu intensive applications like mplayer (Closes: #328697). * Apply japanese debconf translation (Closes: #302487). * Fixed fuzzy string in debconf .po files (Closes: #302430). Also updated es.po. * Corrected lirc-modules-source.conf so that it documents the right way to separate the list of drivers (should be space separated, not comma separated). (Closes: #312102). * libusb-dev is already listed in Build-Depends, so this bug should have been already fixed (Closes: #317158). * Find the kernel source by testing for $KSRC/include/linux/version.h. (Closes: #301590). -- Amaya Rodrigo Sastre Sun, 18 Sep 2005 11:55:30 +0200 lirc (0.7.1pre2-7) unstable; urgency=low * The "Kicked out from the MIA Team, by Debconf5 and RL meetings" Release. * Acknowledge bugs closed by previous NMU. Thanks Blars! (Closes: #315579, #318268, #312497, #301639, #302141). * Applied patch from Agustin Martin , fixing: - Get rid of unknown symbols when inserting lirc_sir.ko - Build when two drivers requiring lirc_dev are selected - Build the atiusb driver properly (Closes: #303663, #304609, #300989). * Apply patch supplied by Juergen Pfennig, making irxevent send keys to the right application. (Closes: #326703). * Apply patch from Robert Bihlmeyer to partially take care of #303078, while a more elegant solution is found. * Apply patch from Alban to correct spurious warning with aclocal >= 1.8. (Closes: #305291). * And last, but not least, make litian happy: - Get rid of some bashisms with help from Guillem Jover - Avoid deprecated use of chown (ie. s/root.root/root:root/). * Special thanks to J. Carlos Garcia Sogo for the quick tutorial on dpatch. -- Amaya Rodrigo Sastre Sat, 17 Sep 2005 20:47:15 +0200 lirc (0.7.1pre2-6.1) unstable; urgency=low * 0 day NMU for RC bug durring bug squishing party * remove unportable -v option from md5sum command in debian/rules (only one of the two md5sum programs in debian has it) (closes: #315579) * standards version 3.6.2 (no changes) * fix lirc-modules-source for dpkg 1.13, add versioned dpkg dependancy (closes: #318268) * Vietnamese debconf translation (closes: #312497) * add build-dependency on libxt-dev (closes: #301639, #302141) -- Blars Blarson Sat, 3 Sep 2005 00:12:27 +0000 lirc (0.7.1pre2-6) unstable; urgency=low * back to priority optional. I am really confused now :) -- Amaya Rodrigo Sastre Mon, 28 Mar 2005 23:10:45 +0200 lirc (0.7.1pre2-5) unstable; urgency=low * Now really close (Closes: #301570), instead of closing 301589 twice, now instead of looking for Rules.make or Makefile, we test for $KSRC/include/linux/version.h. Also (Closes: #199869). * Leave debian/liblircclient-dev.install alone (Closes: #301723). * Add french debconf template (Closes: #301825). -- Amaya Rodrigo Sastre Sun, 27 Mar 2005 23:12:16 +0200 lirc (0.7.1pre2-4) unstable; urgency=low * Remove liblirc_client.so.0.0.0 from debian/liblircclient-dev.install (Closes: #301589). * Do not look for Rules.make while building lirc-modules, as it is no longer shipped with kernels above 2.6.1x (Closes: #301589). * Changed priority optional from extra. -- Amaya Rodrigo Sastre Sun, 27 Mar 2005 01:45:14 +0100 lirc (0.7.1pre2-3) unstable; urgency=low * The "I love to do some lirc housekeeping now that we're really going to release Sarge" Release. * Make /etc/init.d/lirc point to more useful doc regarding howto configure lircd (Closes: #239196). * Fix makefile for lirc-modules-source so that ati_usb is properly built. Thanks to James Stark for the patch (Closes: #300989). * lirc 0.7.1 is now in testing and does build with 2.6 (Closes: #300587). * Fixed installatation tutorial typo mistake (Closes: #299647). * Lirc has been logging to syslog properly identifying itself probably for some time now (Closes: #164536). * Build depend on libusb-dev so that the userspace driver for ATI USB remotes (amongst others) is supported (Closes: #294248). * If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be automatically used instead (Closes: #197306). * s/auido/audio/g in debian/lirc.config, ChangeLog, setup.data and setup.sh. * Maybe (Closes: #290903) in debian/lirc.config. * Fixed manpage-section-mismatch in doc/man/lircd.8 and doc/man/lircmd.8. -- Amaya Rodrigo Sastre Fri, 25 Mar 2005 23:48:33 +0100 lirc (0.7.1pre2-2) unstable; urgency=low * Applied patch from Thomas Schmidt, thanks!. (Closes: #294720). -- Amaya Rodrigo Sastre Sat, 12 Mar 2005 00:01:46 +0100 lirc (0.7.1pre2-1) unstable; urgency=low * New upstream release (Closes: #294174). * s/serial_CFLAGS/SERIAL_CFLAGS/a in Makefile (Closes: #294689). * Added support for ati_usb modules (Closes: #297243). * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Thu, 10 Mar 2005 00:27:20 +0100 lirc (0.7.1pre1-2) unstable; urgency=low * The "And when it rains, it poures" Release. * Fixed the nasty "setup-driver.sh not found" bug, again. This fix also should fix the debconf freeze (Closes: #269833, #292637, #293091) Thanks to Chris Boyle for spotting the fix. * Included patch from "Eloy A. Paris" (Closes: #292043) so that lirc_dev gets shipped. * Partially included patch for Makefile from Yann Rouillard (Closes: #246112, #287328, ) so that correct modules and symbols get installed for 2.6.x kernels. * Improved paths in README.Debian (Closes: #218888). * Suggest just kernel-source and not headers (Closes: #250570). * It now builds with 2.6 kernels (Closes: #221023). I'm terrible with lirc bugs housekeeping :) * Newewst upstream versions fix i2c build problems (Closes: #256986). More housekeeping here. * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Tue, 25 Jan 2005 22:29:15 +0100 lirc (0.7.1pre1-1) unstable; urgency=low * New upstream release. -- Amaya Rodrigo Sastre Sun, 23 Jan 2005 02:51:59 +0100 lirc (0.7.0.1-2) unstable; urgency=low * The "I can't believe nobody reported a RC bug yet!" release. * Changed section from optional to extra to make installer@ftp-master happy. * Change short decriptions in order to comply with new lintian check. * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Sun, 23 Jan 2005 02:51:48 +0100 lirc (0.7.0.1-1) unstable; urgency=low * The "let's try to fix the versioning mistake" release. I mistakenly took 0.7.0pre8 as later than 0.7.0, so this is actually upstream latest tarball, 0.7.0, with a made up version number. * Not try to build /dev/lirc during build (Closes: #287559). Thanks to Lars Wirzenius . * Include setup-driver.sh (Closes: #287370). Thanks to Lars Wirzenius . * This upstream version really closes (Closes: #236573, #255383, #280548). * The Danish debconf po is included! (Closes: #276699). * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Sat, 15 Jan 2005 14:41:42 +0100 lirc (0.7.0pre8-1) unstable; urgency=low * New upstream release. * GNU config automated update: config.sub (20020307 to 20041130), config.guess (20020320 to 20041112) -- Amaya Rodrigo Sastre Sun, 26 Dec 2004 07:48:16 +0100 lirc (0.7.0-1) unstable; urgency=low * New upstream release (Closes: #236573, #280548, #236573). * Now builds with 2.6.x (Closes: #255383, #221023). * GNU config automated update: config.sub (20020307 to 20040624), config.guess (20020320 to 20040813) * Added Danish po-debconf translation for lirc (Closes: #276699). * Removed Ian Murdock from Uploaders. * GNU config automated update: config.sub (20040624 to 20041130), config.guess (20040813 to 20041112) -- Amaya Rodrigo Sastre Tue, 28 Dec 2004 04:44:30 +0100 lirc (0.6.6-13) unstable; urgency=low * The "Happy birthday Ranty" release (Sept 24th). * The "Happy birthday Amaya" release (Sept 25th). * The "Pierre, we are so glad you are back home and feeling better" release. * Fixed path in README.Debian (Closes: #218888) * Fix debconf prompt freeze (Closes: #269833) * debian/modules-source/README: s/WARMING/WARNING/ -- Amaya Rodrigo Sastre Sat, 25 Sep 2004 19:57:49 +0200 lirc (0.6.6-12) unstable; urgency=low * The "Ranty is missed everyday" release. Happy hacking in Heaven, our friend+brother (Closes: #252156). * 4 new maintainers (Closes: #248767). * Added Pierre Machard, Riku Voipio and Ian Murdock to the Uploaders field. * GNU config automated update: config.sub (20040312 to 20040624), config.guess (20040312 to 20040813) * Get rid of config.log and config.status in the clean target. * Included French Debconf Translation (Closes: #262379). * Included Czech Debconf Translation (Closes: #261285). * Added support for CFLAGS in the build target. -- Amaya Rodrigo Sastre Fri, 27 Aug 2004 20:21:00 +0200 lirc (0.6.6-11) unstable; urgency=low * Apply patch from : Goswin von Brederlow (closes: #259978) - lirc-svga is only build for i386 -- Pierre Machard Sun, 18 Jul 2004 01:06:08 +0200 lirc (0.6.6-10) unstable; urgency=low * Add a test to know if smode2 is available for the target arch (thanks to mrvn) * Change priority to optional (closes: #236481) * Swith to po-debconf format (closes: #232283) -- Pierre Machard Sat, 17 Jul 2004 19:10:45 +0200 lirc (0.6.6-9) unstable; urgency=low * QA Upload * Add depends on svgalib only for i386 to fix building on arch !i386 -- Pierre Machard Sat, 17 Jul 2004 16:53:55 +0200 lirc (0.6.6-8) unstable; urgency=low * QA Upload * Set Maintainer to packages@qa.debian.org * Fix svgalib Build-Deps. (Closes: #243195) * GNU config automated update: config.sub (20031007 to 20040312), config.guess (20031007 to 20040312) -- Pierre Machard Sat, 17 Jul 2004 14:52:28 +0200 lirc (0.6.6-7) unstable; urgency=low * Set Architecture: properly for lirc-modules-KVERS packages. (Closes:#218881) courtesy of Helge Kreutzmann * GNU config automated update: config.sub (20030717 to 20031007), config.guess (20030702 to 20031007) * Build-Depend on debhelper >= 4.0.18 for dh_install's --list-missing. (Closes:#187712) * Fix "quick walkthrough" instructions it is "debian/rules" not "make". (Closes:#202622) * Recommend xfonts-75dpi and copy from the gimp's package description the explanation on why it is only recommended. (Closes:#215168) * Use ACTISYS_ACT200L instead of ACTISYS_200L to match driver sources. (Closes:#204724) * Remove "Depends: ${shlibs:Depends}, ${misc:Depends}" from binary module packages as it may cause an empty Depends: line which then confuses apt. (Closes:#210477) * Fix spelling in hardware.conf. (Closes:#218887) * Add a comment about /dev/lirc/0 to hardware.conf. (Improves:#197306) * Make sure this changelog is UTF-8. -- Manuel Estrada Sainz Sat, 22 Nov 2003 22:07:51 +0100 lirc (0.6.6-6) unstable; urgency=low * Changed liblircclient-dev section to libdevel. * Added "Source: lirc" to modules-source's debian/control. (Closes: #213819) * GNU config automated update: config.sub (20030103 to 20030717), config.guess (20030110 to 20030702) -- Manuel Estrada Thu, 2 Oct 2003 23:45:36 +0200 lirc (0.6.6-5) unstable; urgency=low * Use dpatch. * Use ACTISYS_200L instead of ACT200L to properly configure SIR kernel module. (closes: Bug#182647) -- Manuel Estrada Sainz Sat, 8 Mar 2003 20:15:56 +0100 lirc (0.6.6-4) unstable; urgency=low * Add kdist_configure target to lirc-modules-source. (closes: Bug#169364) * GNU config automated update: config.sub (20020905 to 20021130), config.guess (20020903 to 20021130) * use DH_COMPAT 4 * GNU config automated update: config.sub (20021130 to 20030103), config.guess (20021130 to 20030110) * Load kernel modules modules with autoclean (closes: Bug#176421) * Move configuration files for the different remotes from share/doc/lirc/ to share/lirc/. -- Manuel Estrada Sainz Wed, 22 Jan 2003 21:20:32 +0100 lirc (0.6.6-3) unstable; urgency=low * Include logcheck support as suggested by Blars Blarson (closes: Bug#164510) * GNU config automated update: config.sub (20020703 to 20020905), config.guess (20020709 to 20020903) * 'sed' was segfaulting on 'configure', use 'sort -u' instead (closes: Bug#166264). -- Manuel Estrada Sainz Fri, 25 Oct 2002 21:44:45 +0200 lirc (0.6.6-2) unstable; urgency=low * Fixed modutils file setup on postinst (closes: Bug#164200). Thanks to "Aaron M. Ucko" for diagnostic and fix. * Temporarly renamed 'rc' into 'irsend' to prevent name clash with 'rc' package, if upstream uses something different, I'll follow. (closes: Bug#164196). -- Manuel Estrada Sainz Fri, 11 Oct 2002 11:16:50 +0200 lirc (0.6.6-1) unstable; urgency=low * New upstream release. * added rc tool for sending IR commands (previously included in xrc package) * bugfix for Winfast TV2000 card * added SIR support for Actisys Act200L dongle (Karl Bongers) * added UDP network driver for use with the IPC@Chip (Jim Paris) * added support for hardware connected to soundcard input (Pavel Machek) * added support for Tekram M230 Mach64 (Froenchenko Leonid) * add debhelper dependency to lirc-modules-source (closes: Bug#163974). * GNU config automated update: config.sub (20020621 to 20020703), config.guess (20020529 to 20020709) * Improved sanity checking when building kernel modules (closes: Bug#153491). * Fixed a typo that prevented "automatic" configuration of lirc_parallel driver. * Use /etc/modutils/lirc to set kernel module parameters (closes: Bug#154476). * Add a note about the need of 'setserial /dev/ttySX uart none' when using lirc_serial or lirc_sir to README.Debian. * lirc.config is now "POSIX Shell" compatible, use /bin/sh instead of /bin/bash. -- Manuel Estrada Sainz Thu, 10 Oct 2002 18:53:57 +0200 lirc (0.6.5-6) unstable; urgency=low * Took the upstream fix for the compilation problem with 2.4.19-rc1 kernels. (closes: Bug#152982) -- Manuel Estrada Sainz Thu, 8 Aug 2002 13:58:48 +0200 lirc (0.6.5-5) unstable; urgency=low * Patch by Andy Mortimer to include network only support. (closes: Bug#151414) -- Manuel Estrada Sainz Tue, 9 Jul 2002 17:03:47 +0200 lirc (0.6.5-4) unstable; urgency=low * Applied a patch from CVS to remove the restricted licence on files generated with irrecord. (closes: Bug#152074) -- Manuel Estrada Sainz Sun, 7 Jul 2002 02:12:57 +0200 lirc (0.6.5-3) unstable; urgency=low * Hacked around a problem with kernel 2.4.19-rc1. -- Manuel Estrada Sainz Thu, 4 Jul 2002 23:36:10 +0200 lirc (0.6.5-2) unstable; urgency=low * Fixed a typo in README.Debian * Tell how to get a list of supported drivers in /etc/lirc/hardware.conf (closes: Bug#141318). * Changed section to "utils". (closes: Bug#145100) * GNU config automated update: config.sub (20020102 to 20020307), config.guess (20020102 to 20020320) * GNU config automated update: config.sub (20020307 to 20020621), config.guess (20020320 to 20020529) -- Manuel Estrada Thu, 4 Jul 2002 21:50:25 +0200 lirc (0.6.5-1) unstable; urgency=low * New upstream release. * Updated debian/rules based on /usr/share/doc/autotools-dev/README.Debian.gz + Use DEB_HOST_GNU_TYPE and DEB_BUILD_GNU_TYPE + Update config.{sub,guess} automatically + touch every single file in 'clean' to prevent timestamp skews * GNU config automated update: config.sub (20011130 to 20020102), config.guess (20011126 to 20020102) * Use syslog and offer to remove /var/log/lircd (closes: Bug#131774) * Integrate it87 kernel driver with the packing. + updated debian/modules-source/{Makefile,README.make}, lirc-modules-source.templates and lirc-modules-source.config -- Manuel Estrada Sainz Fri, 1 Feb 2002 21:04:49 +0100 lirc (0.6.4-10) unstable; urgency=high * The urgency is because: + 0.6.4-9: may be uninstalable. + reduces user frustration on module building by giving a verbose error message. + Complies with policy by not restoring deleted conffiles on the users back. + Secures device permisions. + There is no new feature. * /etc/lirc/lircmd.conf may not be there (closes: Bug#126279). * Don't create /etc/lirc/* files unless they are there, they should be moved from /etc/ or the user chooses to reconfigure the package. * Add MODULE_LICENSE to kernel modules, patch by Ingo Saitz This was already fixed upstream, but oh well, lets not wait to the next release. (closes: Bug#128074) * Cry out if IRQ, PORT or TIMER are not set when compiling kernel modules. (closes: Bug#108131) * Tell devfsd to create /dev/lirc/0 unconditionaly. (works around: #128072) The proper fix should come soon from upstream. * Changed permisions of kernel devices from "root.video 660" to "root.root 660" since only lircd should use them and it runs as root. By writting to this devices you may confuse kernel code and that kind of thing should be reserved to root. If someone feels that read-only access should be allowed to to other users or groups go ahead and file a bug. -- Manuel Estrada Sainz Sun, 13 Jan 2002 20:27:00 +0100 lirc (0.6.4-9) unstable; urgency=low * Added IntelliMouse support to lircmd. (closes: Bug#122300) * Fixed html comments on the documentation which prevented some text from showing up in a browser, so if you were looking for something and it wasn't there go back and make sure it is still not there. -- Manuel Estrada Sainz Sat, 15 Dec 2001 20:04:48 +0100 lirc (0.6.4-8) unstable; urgency=low * Took X dependent parts and svgalib parts to their own packages, and have lirc Suggest them. (closes: Bug#121543) * ispelled README.Debian. * Applied patch to handle epochs properly on lirc-modules-source by Dwayne C. Litzenberger" (closes: Bug#123019). * Enabled Irman support (closes: Bug#103951). I don't have an Irman and don't realy know how the hell it works, so if there is any problem please report and I will try to fix it. * Updated config.sub and config.guess from ftp://ftp.gnu.org/pub/gnu/config/ -- Manuel Estrada Sainz Mon, 10 Dec 2001 23:46:29 +0100 lirc (0.6.4-7) unstable; urgency=low * I forgot to protect a couple of db_input's with "|| true". (closes: Bug#121006) * Make sure lirc-modules-source/kernel-source-not-found gets shown when needed. -- Manuel Estrada Sainz Sun, 25 Nov 2001 03:32:58 +0100 lirc (0.6.4-6) unstable; urgency=low * Build-dep on svgalib-dummyg1[!i386] and svgalibg1-dev [i386] so it can build on architectures where svgalib is not available. -- Manuel Estrada Sainz Wed, 21 Nov 2001 13:17:22 +0100 lirc (0.6.4-5) unstable; urgency=low * call db_stop in lirc.postrm. * modified lirc-modules-source.postinst a bit hopefully to make it more portable, infact it now works with zsh. * Updated README.Debian on regards to irman2lirc. * Updated manpages and added manpages for all binaries (closes: Bug#85217). * Build smode2 which makes lirc depend on svgalibg1. Please file a wishlist bug suggesting an alternative if that is inconvenient. -- Manuel Estrada Sainz Sun, 4 Nov 2001 20:39:50 +0100 lirc (0.6.4-4) unstable; urgency=low * lirc was not building on powerpc because of the time difference with voltaire.debian.org. I was 'touch'ing configure.in to prevent rebuilding too much stuff and the time difference broke that. Now I am a bit more aggressive with the time change. * Use forkpty from libc, so I don't have to worry about devfs or devpts. closes: #115870 or at least makes it a libc problem :) -- Manuel Estrada Sainz Mon, 29 Oct 2001 15:40:23 +0100 lirc (0.6.4-3) unstable; urgency=low * Updated config.sub and config.guess from ftp://ftp.gnu.org/pub/gnu/config/ so lirc may build on more architectures (closes: #115964). -- Manuel Estrada Sainz Wed, 17 Oct 2001 16:19:56 +0200 lirc (0.6.4-2) unstable; urgency=low * Fixed problem with not existing configure.in.stamp (closes: #114494) * Put lirc-modules-source debs in $(KSRC)/.. as suggested by Christian Ohm * Depend on debconf (>= 0.5.00) to use seen flag. -- Manuel Estrada Sainz Mon, 15 Oct 2001 19:29:53 +0200 lirc (0.6.4-1) unstable; urgency=low * Sorry for those 2 months of inactivity, I just came back from Colombia where I didn't have a SID system to work on. * New upstream release (closes: #112549) * Call update-devfsd on postrm when purging. (closes: #104446) * Change daemons/Makefile.in insted of daemons/Makefile.am to prevent creating of devices nodes. This way we don't have to run automake and we don't need to Build-depend on automake and libtool. * Properly use MOD_DIR on lirc-modules-source (closes: #105784). * Check for devfs device nodes after loading modules to make sure that they are there (closes: #114284) * Updated lirc-modules-source/do-build description, it should be more readable now (closes: #107765) * Added kdist_clean target to lirc-modules-source debian/rules. -- Manuel Estrada Sainz Thu, 4 Oct 2001 14:35:33 +0200 lirc (0.6.3-3) unstable; urgency=low * include doc/irxevent.keys as it is referenced from within the documentation. * Mising variables will be restored in /etc/lirc/hardware.conf. * Installation won't fail if a conffile is missing (closes: #103326) * Maintainer script cleanups, removed bashisms but some shell script extracted from upstream needs bash :( * Don't manually call ldconfig on liblircclient0 postinst, debhelper does it already. * Make sure that debian/rules is executable on lirc-modules-source package. (closes: #103607) * Build lirc-modules-x.x.x.deb in MODDIR as set by make-kpkg and by default on ".." (closes: #103797) -- Manuel Estrada Sainz Wed, 4 Jul 2001 13:10:14 +0200 lirc (0.6.3-2) unstable; urgency=low * Kernel module building cleanups: it now works for 2.2 kernels, but keep in mind that not all modules support all kernels. * Debconf German translation thanks to Sebastian Feltel (closes: #101171) * Parallel port kernel module now compiles on 2.4 kernels thanks to Santiago Garcia Mantinan * Don't unpack the source into /usr/src/modules directly; instead, build a tarball in /usr/src/lirc-modules.tar.gz * lirc-modules-source is now a kernel-package compliant modules package. * Kernel modules configuration is automated with debconf. * lirc-modules-source:Recommends: make, dpkg-dev, c-compiler, kernel-package * lirc-modules-source:Suggests: kernel-source | kernel-headers * Extracted upstream configuration scripts and integrated them with debconf. * If there is not a valid configuration try to get it from the previous location or from upstream sample files. (closes: #102258) * Added support for devfsd. * Debconf Spanish translation thanks to Carlos Valdivia Yagüe (closes: #102158) * init.d script tries to load appropriate kernel modules. * lirc-modules-source: Added descriptions of ANIMAX, IRDEO and TEKRAM. * Loading kernel modules from init.d script is now optional (See /etc/lirc/hardware.conf ) * init.d script cryes out loud and refuses to launch daemons if it tries to load kernel modules and they are not there. * Resurrected automatic informal module building. * Register html documentation with doc-base. * Updated README.Debian, lirc-modules-source.README.Debian modules-source/README and modules-source/README.make to reflect latest changes. -- Manuel Estrada Sainz Wed, 27 Jun 2001 05:43:29 +0200 lirc (0.6.3-1) unstable; urgency=low * New Maintainer. * New upstream release. (closes: #71643, #90129, #90130, #99405, #94686, #97373, #73023, #85214, #90258) * /etc/rc?.d/S??lirc priority is now 19 so it starts before gpm and creates /dev/lircm for devfs users. (closes: #76958) * Pass the kernel version correctly to configure. (closes: #85215) * Moved kernel modules source to it's own package. * lirc: Suggests lirc-modules-source * Adjusted de descriptions for the package. * moved irman2lirc to /usr/bin * Moved config files to /etc/lirc/ and added hardware.conf so editing /etc/init.d/lirc is not needed * Explained a bit more how to make all this work in README.Debian * Added some manpages. -- Manuel Estrada Sainz Thu, 7 Jun 2001 00:45:11 +0200 lirc (0.6.1-1.2) unstable; urgency=low * Added libtool build-dependency. Should fix 90258 * Non-maintainer upload -- Gopal Narayanan Fri, 13 Apr 2001 17:09:21 +0000 lirc (0.6.1-1.1) unstable; urgency=low * Non-maintainer Upload * Took out the install-exec-local target from daemons/Makefile.am and added automake before configure in rules * mknod stuff commented out in init.d * Moved mknod to postinst * above fixes are for bug 85214 -- Gopal Narayanan Fri, 16 Mar 2001 23:02:39 -0500 lirc (0.6.1-1) unstable; urgency=low * New upstream version. * New makefile system for the kernel modules (Closes: #69028). -- Tom Lees Sun, 27 Aug 2000 12:30:57 +0100 lirc (0.6.0.final-2) unstable; urgency=low * Build the Makefile for /usr/src/lirc/lirc_aver. * Remove the /usr/src/lirc/Makefile* files, they're useless. * Add a README to /usr/src/lirc about building the drivers. -- Tom Lees Tue, 2 May 2000 09:33:14 +0100 lirc (0.6.0.final-1) unstable; urgency=low * New upstream release. * Fix a small bug which caused lircd to crash. * Make the drivers buildable. * Add AverMedia driver, thanks to Santiago Garcia Mantinan . * Remove the device nodes on purge. -- Tom Lees Thu, 20 Apr 2000 00:18:24 +0100 lirc (0.6.0pre6-1) unstable; urgency=low * Initial Release. -- Tom Lees Thu, 30 Mar 2000 19:30:57 +0100 Local variables: mode: debian-changelog End: debian/liblircclient0.install0000664000000000000000000000006612311234255013457 0ustar usr/lib/liblirc_client.so.* usr/lib/liblirc_client.la debian/TODO0000664000000000000000000000114512311234255007657 0ustar Apply sed-segfaults patch from CVS. Improve package descriptions. Improbe --version and --help messages for help2man generation. use MAKEDEV when a mayor number is officialy assigned to LIRC. Make sure that lircd daemonizes properly. Find out what to do with sample configuration files. probably move them to /usr/share/lirc Ask lirc/install_devices only if they are not there? use install instead of cp in debian/rules. Should I realy? debhelper takes care of permisions anyway. How about dh_install? Make lirc_sir type runtime selectable, so module binary packages can be included in debian mirrors. debian/lirc-x.install0000664000000000000000000000013212311234255011750 0ustar usr/bin/xmode2 usr/bin/irxevent usr/share/man/man1/xmode2.1 usr/share/man/man1/irxevent.1 debian/po/0000775000000000000000000000000012311315255007604 5ustar debian/po/es.po0000664000000000000000000000651712311252264010564 0ustar # lirc po-debconf translation to spanish # Copyright (C) 2006 Software in the Public Interest # This file is distributed under the same license as the postfix package. # # Changes: # - Initial translation # Rudy Godoy , 2006 # # # Traductores, si no conoce el formato PO, merece la pena leer la # documentacin de gettext, especialmente las secciones dedicadas a este # formato, por ejemplo ejecutando: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Equipo de traduccin al espaol, por favor lean antes de traducir # los siguientes documentos: # # - El proyecto de traduccin de Debian al espaol # http://www.debian.org/intl/spanish/coordinacion # especialmente las notas de traduccin en # http://www.debian.org/intl/spanish/notas # # - La gua de traduccin de po's de debconf: # /usr/share/doc/po-debconf/README-trans # o http://www.debian.org/intl/l10n/po-debconf/README-trans # # msgid "" msgstr "" "Project-Id-Version: lirc 0.8.0\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2008-02-02 16:12-0500\n" "Last-Translator: Rudy Godoy \n" "Language-Team: Debian Spanish l10n team \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-15\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Elija el tipo de dispositivo serie soportado:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/pt.po0000664000000000000000000000510212311252264010565 0ustar # Portuguese translation of lirc. # This file is distributed under the same license as the lirc package. # Rui Branco , 2006. # 2007-10-07 - Rui Branco - 15u28f # # msgid "" msgstr "" "Project-Id-Version: lirc 0.8.0-4\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-10-07 16:21+0100\n" "Last-Translator: Rui Branco \n" "Language-Team: Portuguese \n" "Language: pt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Por favor escolha o tipo de dispositivo de série suportado:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/fr.po0000664000000000000000000000533012311252264010554 0ustar # Translation of lirc debconf templates to French # Copyright (C) 2007 Christian Perrier # Copyright (C) 2004-2006 Jean-Luc Coulon (f5ibh) # This file is distributed under the same license as the lirc package. # # Christian Perrier , 2007. msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-09-30 19:53+0200\n" "Last-Translator: Christian Perrier \n" "Language-Team: French \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Veuillez choisir le type de périphérique série qui sera géré :" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/sv.po0000664000000000000000000000602112311252264010573 0ustar # translation of lirc_0.8.2-2_sv.po to swedish # # Translators, if you are not familiar with the PO format, gettext # documentation is worth reading, especially sections dedicated to # this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Some information specific to po-debconf are available at # /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # # Developers do not need to manually edit POT or PO files. # # Martin Bagge , 2008. msgid "" msgstr "" "Project-Id-Version: lirc_0.8.2-2_sv\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2008-07-21 16:06+0100\n" "Last-Translator: Martin Bagge \n" "Language-Team: swedish \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-1\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Swedish\n" "X-Poedit-Country: SWEDEN\n" "X-Generator: KBabel 1.11.4\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Vnligen ange typ av seriellutrustning:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/POTFILES.in0000664000000000000000000000005112311245306011354 0ustar [type: gettext/rfc822deb] lirc.templates debian/po/fi.po0000664000000000000000000000463612311252264010553 0ustar msgid "" msgstr "" "Project-Id-Version: lirc\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-10-07 18:05+0200\n" "Last-Translator: Esko Arajärvi \n" "Language-Team: Finnish \n" "Language: fi\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Finnish\n" "X-Poedit-Country: FINLAND\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Valitse tuettavan sarjalaitteen tyyppi:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/ja.po0000664000000000000000000000560512311252264010544 0ustar # # Translators, if you are not familiar with the PO format, gettext # documentation is worth reading, especially sections dedicated to # this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Some information specific to po-debconf are available at # /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # # Developers do not need to manually edit POT or PO files. # msgid "" msgstr "" "Project-Id-Version: lirc\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-09-26 10:07+0900\n" "Last-Translator: Kenshi Muto \n" "Language-Team: Japanese \n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "サポートするシリアルデバイスのタイプを選んでください:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/ru.po0000664000000000000000000000542512311252264010600 0ustar # translation of ru.po to Russian # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Yuri Kozlov , 2007. msgid "" msgstr "" "Project-Id-Version: 0.8.0-9.3\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-09-25 20:42+0400\n" "Last-Translator: Yuri Kozlov \n" "Language-Team: Russian \n" "Language: ru\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Выберите тип поддерживаемых последовательных устройств:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/cs.po0000664000000000000000000000556212311252264010561 0ustar # # Translators, if you are not familiar with the PO format, gettext # documentation is worth reading, especially sections dedicated to # this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Some information specific to po-debconf are available at # /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # # Developers do not need to manually edit POT or PO files. # msgid "" msgstr "" "Project-Id-Version: lirc\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2006-09-26 11:34+0200\n" "Last-Translator: Miroslav Jezbera \n" "Language-Team: Czech \n" "Language: cs\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Vyberte prosím typ podporovaného sérového zařízení:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/gl.po0000664000000000000000000000500712311252264010550 0ustar # Galician translation of lirc's debconf templates # This file is distributed under the same license as the lirc package. # Jacobo Tarrio , 2007. # msgid "" msgstr "" "Project-Id-Version: lirc\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-09-30 18:53+0100\n" "Last-Translator: Jacobo Tarrio \n" "Language-Team: Galician \n" "Language: gl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Escolla o tipo de dispositivo serie soportado:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/it.po0000664000000000000000000000507412311252264010566 0ustar # ITALIAN TRANSLATION FOR GEDIT # Copyright (C) 2008 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Vincenzo Campanella , 2008. # # msgid "" msgstr "" "Project-Id-Version: gedit\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2008-09-29 09:32+0200\n" "Last-Translator: Vincenzo Campanella \n" "Language-Team: Italian \n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Per favore scegli il tipo di device seriale supportato:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/pt_BR.po0000664000000000000000000000521412311252264011154 0ustar # lirc Brazilian Portuguese translation # Copyright (C) 2007 THE lirc'S COPYRIGHT HOLDER # This file is distributed under the same license as the lirc package. # Felipe Augusto van de Wiel (faw) , 2007. # msgid "" msgstr "" "Project-Id-Version: lirc (20071008)\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-10-08 00:47-0300\n" "Last-Translator: Felipe Augusto van de Wiel (faw) \n" "Language-Team: l10n portuguese \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "pt_BR utf-8\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Por favor, escolha o tipo do dispositivo serial suportado:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/da.po0000664000000000000000000000543712311252264010541 0ustar # # Translators, if you are not familiar with the PO format, gettext # documentation is worth reading, especially sections dedicated to # this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Some information specific to po-debconf are available at # /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # # Developers do not need to manually edit POT or PO files. # msgid "" msgstr "" "Project-Id-Version: lirc 0.6.6-12\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2005-12-12 20:41+0100\n" "Last-Translator: Morten Brix Pedersen \n" "Language-Team: Danish \n" "Language: da\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy msgid "Port your serial device is attached to:" msgstr "Hvilken IO-port bruger din IR-seriel enhed?" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/vi.po0000664000000000000000000000514612311252264010570 0ustar # Vietnamese Translation for lirc. # Copyright © 2007 Free Software Foundation, Inc. # Clytie Siddall , 2005-2007. # msgid "" msgstr "" "Project-Id-Version: lirc 0.8.0-13\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-09-28 23:35+0930\n" "Last-Translator: Clytie Siddall \n" "Language-Team: Vietnamese \n" "Language: vi\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: LocFactoryEditor 1.7b1\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Hãy chọn kiểu thiết bị nối tiếp được hỗ trợ :" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/templates.pot0000664000000000000000000000464212311252073012332 0ustar # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: lirc\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 msgid "Port your serial device is attached to:" msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/nb.po0000664000000000000000000000520612311252264010546 0ustar # translation of lirc.po to Norwegian Bokmål # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Bjørn Steensrud , 2008. msgid "" msgstr "" "Project-Id-Version: lirc\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2008-03-08 21:38+0100\n" "Last-Translator: Bjørn Steensrud \n" "Language-Team: Norwegian Bokmål \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Velg den serielle enhetstypen som skal støttes:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/eu.po0000664000000000000000000000512712311252264010562 0ustar # translation of lirc-templates.po to Euskara # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Piarres Beobide , 2008. msgid "" msgstr "" "Project-Id-Version: lirc-templates\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2008-03-10 10:21+0100\n" "Last-Translator: Piarres Beobide \n" "Language-Team: Euskara \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Mesedez hautatu onartutako gailu mota:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/nl.po0000664000000000000000000000603112311252264010555 0ustar # translation of lirc_0.8.0-5_templates.po to dutch # This file is distributed under the same license as the lirc package. # # Please see debian/copyright. # # Translators, if you are not familiar with the PO format, gettext # documentation is worth reading, especially sections dedicated to # this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # Some information specific to po-debconf are available at # /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans# # Developers do not need to manually edit POT or PO files. # msgid "" msgstr "" "Project-Id-Version: lirc_0.8.0-5_nl\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2006-06-15 20:03+0100\n" "Last-Translator: Kurt De Bree \n" "Language-Team: Dutch \n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10.2\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "IO port of your IR serial device:" msgid "Port your serial device is attached to:" msgstr "IO-poort van uw seriële IR-apparaat:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/po/de.po0000664000000000000000000000517512311252264010544 0ustar # Translation of lirc debconf templates to German # Copyright (C) Matthias Julius , 2006. # Copyright (C) Helge Kreutzmann , 2007. # This file is distributed under the same license as the lirc package. # msgid "" msgstr "" "Project-Id-Version: lirc 0.8.0-13\n" "Report-Msgid-Bugs-To: lirc@packages.debian.org\n" "POT-Creation-Date: 2014-03-16 00:35-0700\n" "PO-Revision-Date: 2007-10-06 23:19+0200\n" "Last-Translator: Helge Kreutzmann \n" "Language-Team: German \n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: select #. Description #: ../lirc.templates:2001 msgid "Remote control configuration:" msgstr "" #. Type: select #. Description #: ../lirc.templates:2001 msgid "" "If you choose a remote or transmitter, but already have a configuration file " "in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/" "lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/" "lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it " "will not be overwritten and your current /etc/lirc/lircd.conf will be lost." msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "IR transmitter, if present:" msgstr "" #. Type: select #. Description #: ../lirc.templates:3001 msgid "" "IR transmitters can be used for controlling external devices. Some devices " "are considered transceivers, with the ability to both send and receive. " "Other devices require separate hardware to accomplish these tasks." msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "Custom event interface for your dev/input device:" msgstr "" #. Type: select #. Description #: ../lirc.templates:4001 msgid "" "Many remotes that were previously supported by the lirc_gpio interface now " "need to be set up via the dev/input interface. You will need to custom " "select your remote's event character device. This can be determined by " "'cat /proc/bus/input/devices'." msgstr "" #. Type: select #. Description #: ../lirc.templates:5001 #, fuzzy #| msgid "Please choose the supported serial device type:" msgid "Port your serial device is attached to:" msgstr "Bitte wählen Sie den unterstützten seriellen Gerätetyp:" #. Type: select #. Description #: ../lirc.templates:5001 msgid "" "The UART (serial) driver is a low level driver that takes advantage of bit " "banging a character device. This means that you can only use it with " "hardware serial devices. It unfortunately does not work with USB serial " "devices." msgstr "" debian/logcheck.ignore0000664000000000000000000000013112311234255012145 0ustar lircd[ -].*\[.*\]: accepted new client on \/dev\/lircd lircd[ -].*\[.*\]: removed client debian/extras/0000775000000000000000000000000012311315253010472 5ustar debian/extras/README.extras0000664000000000000000000000035412311234255012663 0ustar This directory contains additional hardware and remote control configuration files distributed with Debian/Ubuntu. These are not part of LIRC so additions/bugs/complaints should be directed to the Debian/Ubuntu package maintainers. debian/extras/more_remotes/0000775000000000000000000000000012311315253013172 5ustar debian/extras/more_remotes/freecom/0000775000000000000000000000000012311315253014612 5ustar debian/extras/more_remotes/freecom/lircd.conf.freeconf0000664000000000000000000000114312311234255020345 0ustar #Freecom DVB-T Stick #By Nico Rdo begin remote name Freecom_DVB-T_USB bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0x8001 gap 237493 toggle_bit 0 begin codes POWER 0x0074 MUTE 0x0071 0 0x000B 1 0x0002 2 0x0003 3 0x0004 4 0x0005 5 0x0006 6 0x0007 7 0x0008 8 0x0009 9 0x000A VOL_UP 0x0073 VOL_DOWN 0x0072 CH_UP 0x0192 CH_DOWN 0x0193 ZOOM 0x0174 JUMP 0x0161 end codes end remote debian/extras/more_remotes/medion/0000775000000000000000000000000012311315253014445 5ustar debian/extras/more_remotes/medion/md1-nbc.conf0000664000000000000000000000437012311234255016543 0ustar begin remote name medion bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 219967 toggle_bit_mask 0x80800000 begin codes 1 0xE20D 2 0x638E 3 0xE40F 4 0x6590 5 0xE611 6 0x6792 7 0xE813 8 0x6994 9 0xEA15 0 0x6C97 Play 0xFA25 Pause 0x7EA9 Stop 0xFD28 Record 0x7CA7 SkipNext 0xF823 SkipPrior 0x76A1 Forward 0xFB26 Rewind 0x79A4 snapshot 0xED18 red 0x87B2 yellow 0x0934 blue 0x8AB5 green 0x0833 Mute 0x5580 return 0xF11C VolUp 0x5E89 VolDown 0xDD08 ChanUp 0x608B ChanDown 0xE10C menu 0x6E99 back 0xF520 Left 0x729D Right 0xF41F Up 0xCDF8 Down 0x4570 tv 0x81AC Videos 0x022D DVD 0x5984 Guide 0xEB16 Music 0x5B86 Radio 0x032E book 0x86B1 Pictures 0xDA05 info 0x84AF Power 0xD702 ok 0x709B enter 0xF31E end codes end remote debian/extras/more_remotes/hauppauge/0000775000000000000000000000000012311315253015151 5ustar debian/extras/more_remotes/hauppauge/lircd.conf.hauppauge0000664000000000000000000003362612311234255021107 0ustar # # this config file was automatically generated # using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 # # contributed by Jens Leuschner # # brand: Hauppauge # model: # supported devices: WinTV primo; WinTV pci; WinTV radio # # This config file will work with both homebrew receivers and # original Hauppauge TV cards !!! # begin remote name Hauppauge bits 13 flags SHIFT_ENC eps 30 aeps 100 one 950 830 zero 950 830 plead 960 gap 89584 repeat_bit 2 begin codes TV 0x000000000000100F RADIO 0x000000000000100C FULL_SCREEN 0x000000000000102E CH+ 0x0000000000001020 CH- 0x0000000000001021 VOL- 0x0000000000001011 VOL+ 0x0000000000001010 MUTE 0x000000000000100D SOURCE 0x0000000000001022 1 0x0000000000001001 2 0x0000000000001002 3 0x0000000000001003 4 0x0000000000001004 5 0x0000000000001005 6 0x0000000000001006 7 0x0000000000001007 8 0x0000000000001008 9 0x0000000000001009 0 0x0000000000001000 RESERVED 0x000000000000101E MINIMIZE 0x0000000000001026 end codes end remote # # this config file was automatically generated # using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 # # contributed by # # brand: Hauppauge # model no. of remote control: # devices being controlled by this remote: PVR 2/350 # begin remote name hauppauge_pvr bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Power 0x00000000000017FD Go 0x00000000000017FB 1 0x00000000000017C1 2 0x00000000000017C2 3 0x00000000000017C3 4 0x00000000000017C4 5 0x00000000000017C5 6 0x00000000000017C6 7 0x00000000000017C7 8 0x00000000000017C8 9 0x00000000000017C9 Back/Exit 0x00000000000017DF 0 0x00000000000017C0 Menu 0x00000000000017CD Red 0x00000000000017CB Green 0x00000000000017EE Yellow 0x00000000000017F8 Blue 0x00000000000017E9 Ch+ 0x00000000000017E0 Ch- 0x00000000000017E1 Vol- 0x00000000000017D1 Vol+ 0x00000000000017D0 Ok 0x00000000000017E5 Mute 0x00000000000017CF Blank 0x00000000000017CC Full 0x00000000000017FC Rewind 0x00000000000017F2 Play 0x00000000000017F5 Forward 0x00000000000017F4 Record 0x00000000000017F7 Stop 0x00000000000017F6 Pause 0x00000000000017F0 Replay 0x00000000000017E4 Skip 0x00000000000017DE end codes end remote # # this config file was automatically generated # using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 # # contributed by # # brand: Hauppauge 350 # Created: G.J. Werler (The Netherlands) # Project: Mythtv Fedora Pundit-R www.mythtvportal.com # Date: 2004/11/28 # model no. of remote control: Hauppauge A415-HPG # devices being controlled by this remote: PVR-350 # begin remote name Hauppauge_350 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Go 0x00000000000017BB Power 0x00000000000017BD TV 0x000000000000179C Videos 0x0000000000001798 Music 0x0000000000001799 Pictures 0x000000000000179A Guide 0x000000000000179B Radio 0x000000000000178C Up 0x0000000000001794 Left 0x0000000000001796 Right 0x0000000000001797 Down 0x0000000000001795 OK 0x00000000000017A5 Back/Exit 0x000000000000179F Menu/i 0x000000000000178D Vol+ 0x0000000000001790 Vol- 0x0000000000001791 Prev.Ch 0x0000000000001792 Mute 0x000000000000178F Ch+ 0x00000000000017A0 Ch- 0x00000000000017A1 Record 0x00000000000017B7 Stop 0x00000000000017B6 Rewind 0x00000000000017B2 Play 0x00000000000017B5 Forward 0x00000000000017B4 Replay/SkipBackward 0x00000000000017A4 Pause 0x00000000000017B0 SkipForward 0x000000000000179E 1 0x0000000000001781 2 0x0000000000001782 3 0x0000000000001783 4 0x0000000000001784 5 0x0000000000001785 6 0x0000000000001786 7 0x0000000000001787 8 0x0000000000001788 9 0x0000000000001789 Asterix 0x000000000000178A 0 0x0000000000001780 # 0x000000000000178E Red 0x000000000000178B Green 0x00000000000017AE Yellow 0x00000000000017B8 Blue 0x00000000000017A9 end codes end remote # # this config file was automatically generated # using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 # # contributed by anton|ganthaler.at and juergen.wilhelm|aon.at # members of linux user group Vorarlberg www.lugv.at # # for ir remote controler from Hauppauge WinTV Nexus-S # most of the keys are supported # # brand: Hauppauge # model no. of remote control: WinTV Nexus-S # devices being controlled by this remote: # begin remote name Hauppauge_WinTV_Nexus-S bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 944 828 zero 944 828 plead 980 gap 113932 min_repeat 1 toggle_bit 2 begin codes Up 0x0000000000001794 Down 0x0000000000001795 Left 0x0000000000001796 Right 0x0000000000001797 Power 0x00000000000017BD Ok 0x00000000000017A5 Menu 0x000000000000178D Back 0x000000000000179F Red 0x000000000000178B Green 0x00000000000017AE Yellow 0x00000000000017B8 Blue 0x00000000000017A9 0 0x0000000000001780 1 0x0000000000001781 2 0x0000000000001782 3 0x0000000000001783 4 0x0000000000001784 5 0x0000000000001785 6 0x0000000000001786 7 0x0000000000001787 8 0x0000000000001788 9 0x0000000000001789 Play 0x00000000000017B5 Pause 0x00000000000017B0 Stop 0x00000000000017B6 Record 0x00000000000017B7 FastFwd 0x00000000000017B4 FastRwd 0x00000000000017B2 Channel+ 0x00000000000017A0 Channel- 0x00000000000017A1 Volume+ 0x0000000000001790 Volume- 0x0000000000001791 Mute 0x000000000000178F Timers 0x000000000000178A Recordings 0x000000000000178E Back 0x000000000000179F Record 0x00000000000017B7 Pause 0x00000000000017B0 end codes end remote # # this config file was automatically generated # using lirc-0.8.3pre1(default) on Sat Jun 21 12:36:46 2008 # # contributed by Matthew Wright # # brand: Hauppauge (HRV-1600 RT Remote) # model no. of remote control: A415-HPG-A # devices being controlled by this remote: # begin remote name Hauppauge bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 919 852 zero 919 852 plead 930 gap 112908 toggle_bit_mask 0x800 begin codes power 0x17BD go 0x17BB tv 0x179C videos 0x1798 music 0x1799 pictures 0x179A guide 0x179B radio 0x178C exit 0x179F menu 0x178D prevch 0x1792 mute 0x178F up 0x1794 down 0x1795 left 0x1796 right 0x1797 ok 0x17A5 volup 0x1790 voldown 0x1791 chup 0x17A0 chdown 0x17A1 record 0x17B7 stop 0x17B6 rewind 0x17B2 fastfwd 0x17B4 play 0x17B5 replay 0x17A4 skip 0x179E pause 0x17B0 1 0x1781 2 0x1782 3 0x1783 4 0x1784 5 0x1785 6 0x1786 7 0x1787 8 0x1788 9 0x1789 * 0x178A 0 0x1780 # 0x178E red 0x178B green 0x17AE yellow 0x17B8 blue 0x17A9 sub/cc 0x178E text 0x178A home 0x17BB end codes end remote begin remote name HVR-1100 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 gap 135862 pre_data_bits 16 pre_data 0x8001 begin codes Go 0x0161 power 0x0074 Tv 0x0179 Videos 0x0189 Music 0x0188 Pictures 0x016F Guide 0x016D Radio 0x0181 Up 0x0067 Down 0x006C Left 0x0069 Right 0x006A Ok 0x001C Back/edit 0x00AE Menu 0x008B Vol+ 0x0073 Vol- 0x0072 PrevChan 0x019C Chan+ 0x0192 Chan- 0x0193 Mute 0x0071 Record 0x00A7 Stop 0x0080 replay 0x00A8 SKip 0x00D0 play 0x00CF Previous 0x00A5 Next 0x00A3 Pause 0x0077 1 0x0002 2 0x0003 3 0x0004 4 0x0005 5 0x0006 6 0x0007 7 0x0008 8 0x0009 9 0x000A * 0x0184 0 0x000B # 0x0172 red 0x018E green 0x018F yellow 0x0190 blue 0x0191 end codes end remote debian/extras/more_remotes/hauppauge/lircd.conf.hauppauge_novat5000000664000000000000000000000515012311234255022532 0ustar # # brand: Hauppauge NOVA-T-500 # model no. of remote control: Hauppage Nova-T-500 Snowboard Shape Silver over Black # begin remote name NOVA-T500 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0x1 gap 199999 toggle_bit 0 begin codes Go 0x0162 Power 0x0074 TV 0x0179 Videos 0x0189 Music 0x0188 Pictures 0x00E2 Guide 0x016D Radio 0x0181 ArrowUp 0x0067 ArrowLeft 0x0069 OK 0x0160 ArrowRight 0x006A ArrowDown 0x006C BackExit 0x009E Menu 0x008B VolumeUp 0x0073 VolumeDown 0x0072 PrevCh 0x016B Mute 0x0071 ChannelUp 0x0192 ChannelDown 0x0193 Record 0x00A7 Rewind 0x00A8 SkipBack 0x0195 Play 0x00CF Pause 0x0077 Stop 0x0080 Fwdwind 0x00D0 SkipFwd 0x0197 1 0x0002 2 0x0003 3 0x0004 4 0x0005 5 0x0006 6 0x0007 7 0x0008 8 0x0009 9 0x000A * 0x0037 0 0x000B # 0x0029 one 0x004F two 0x0050 three 0x0051 four 0x004B five 0x004C six 0x004D seven 0x0047 eight 0x0048 nine 0x0049 ten 0x0052 Red 0x018E Green 0x018F Yellow 0x0190 Blue 0x0191 end codes end remote debian/extras/more_remotes/encore/0000775000000000000000000000000012311315253014445 5ustar debian/extras/more_remotes/encore/enltv.conf0000664000000000000000000000337112311234255016452 0ustar begin remote name enltv bits 16 eps 30 aeps 100 one 0 0 zero 0 0 gap 195847 pre_data_bits 16 pre_data 0x8001 begin codes next 0x0197 ok 0x001C vol_down 0x00AE 09 0x0067 08 0x006C 07 0x0069 hide 0x006A winstart 0x0066 recall 0x0175 v_set 0x0179 ch_down 0x0189 music 0x0188 tv/av 0x016F <-- 0x0001 desktop 0x0020 06 0x000F 04 0x00E3 --> 0x008B 05 0x0174 timeshift 0x0167 record 0x00A7 pause_c 0x00CF stop 0x0080 next2stop 0x00D4 00 0x00A8 fastforward 0x00D0 menu 0x019C skipforward 0x0197 ch_up 0x016C pause 0x00D5 dvdlang 0x0170 dvdtext 0x0184 shut 0x0190 main 0x0175 sap 0x0161 teletext 0x0094 ap1 0x018E ap2 0x018F ap4 0x0191 03 0x0002 2 0x0003 -/-- 0x0004 snap 0x0005 5 0x0006 mute 0x0007 7 0x0008 8 0x0009 9 0x0004 02 0x000A v_def 0x000B 01 0x018B end codes end remote debian/extras/more_remotes/msi/0000775000000000000000000000000012311315253013762 5ustar debian/extras/more_remotes/msi/lircd.conf.tvanywhere0000664000000000000000000000523712311234255020132 0ustar # $Id: TVatnywhere,v 1.4 2006/04/19 05:50:12 grog Exp $ # # Configuration file for MSI TV@nywhere Master using the tuner's IR # receiver. This will probably also apply to the MSI TV@nywhere (not # "Master"). The current configuration file for the TV@nywhere remote # control interfaces via an external card. # # Contributed by Greg Lehey, 19 April 2006 # brand: TV@nywhere Master # model no. of remote control: not marked # # See http://www.lemis.com/grog/Thumbnails-20060419.html for a photo # of the remote control. # # To configure: # # 1. Install a recent Linux kernel (I used 2.6.16) with the cx88 # driver. This kernel should automatically detect card and IR # control. # # 2. The IR remote control will appear as a device in # /dev/input/eventX. To find out the value of X, check in # /proc/bus/input/devices. You should see something like: # # I: Bus=0001 Vendor=1462 Product=8606 Version=0001 # N: Name="cx88 IR (MSI TV-@nywhere Master" # P: Phys=pci-0000:01:08.0/ir0 # S: Sysfs=/class/input/input2 # H: Handlers=kbd event2 # B: EV=100003 # B: KEY=20c0000 800000 0 0 0 4 10000 100 0 1e0000 0 2 10100ffc # # The 2 in the line starting with H: gives the clue as to the device # name; it's /dev/input/event2. # # 3. Put this file in /etc/lircd.conf (possibly along with others). # # 4. Start lircd like this: # # lircd -H dev/input -d /dev/input/event2 begin remote name TVatnywhere_Master bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0x8001 gap 175846 toggle_bit 0 begin codes FullScreen 0x0177 MTS 0x00E2 Function 0x0021 Power 0x0074 1 0x0002 2 0x0003 3 0x0004 4 0x0005 5 0x0006 6 0x0007 7 0x0008 8 0x0009 9 0x000A 0 0x000B ChUp 0x0192 ChDown 0x0193 VolUp 0x0073 VolDown 0x0072 T-shift 0x0014 Return 0x001C Rewind 0x00A8 Play 0x0199 FFWD 0x00D0 Mute 0x0071 end codes end remote debian/extras/more_remotes/nebula/0000775000000000000000000000000012311315253014440 5ustar debian/extras/more_remotes/nebula/digitv.conf0000664000000000000000000000574012311234255016605 0ustar # Please make this file available to others # by sending it to # # this config file was automatically generated # using lirc-0.7.2(any) on Sat May 6 12:48:36 2006 # # contributed by J. Brusey # # brand: lirc-nebula.conf # model no. of remote control: Nebula Electronics PCI DigiTV Remote # devices being controlled by this remote: Nebula Electronics PCI DigiTV # begin remote name nebula bits 16 flags RC5|CONST_LENGTH eps 30 aeps 100 one 917 851 zero 917 851 plead 930 pre_data_bits 16 pre_data 0x8001 gap 135605 toggle_bit 0 begin codes TV 0x0179 Aux 0x0186 DVD/CD 0x0185 Power 0x0074 1 0x0002 2 0x0003 3 0x0004 Picture 0x016F 4 0x0005 5 0x0006 6 0x0007 Audio 0x0188 7 0x0008 8 0x0009 9 0x000A i 0x0166 16:9 0x00B7 0 0x000B 14:9 0x00B8 EPG 0x016D Exit 0x00AE Menu 0x008B Up 0x0067 Left 0x0069 OK 0x001C Right 0x006A Down 0x006C Ch+ 0x0192 +Vol 0x0073 Ch- 0x0193 -Vol 0x0072 Red 0x018E Green 0x018F Yellow 0x0190 Blue 0x0191 SubT 0x0172 AD 0x00B9 Text 0x0184 Mute 0x0071 Rewind 0x00A8 Stop 0x0080 Play 0x00CF FastForward 0x00D0 Chapter 0x00BA Pause 0x0077 Step 0x00CF Record 0x00A7 PiP 0x00BB Zoom- 0x004E Zoom+ 0x004A Capture 0x00BC Web 0x00BD e-Mail 0x00D7 Phone 0x00A9 PC 0x0178 end codes end remote debian/extras/more_remotes/atiusb/0000775000000000000000000000000012311315253014461 5ustar debian/extras/more_remotes/atiusb/lircd.conf.atiusb0000664000000000000000000024371712311234255017733 0ustar # # this config file was automatically generated # using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004 # # contributed by Paul Miller # # brand: ATI Remote Wonder # model no. of remote control: 5000015900A # devices being controlled by this remote: ATI USB Receiver # # CHANNEL CODES # To change your channel, hold the hand button down until the # LED begins to blink. Then enter the channel number # (1 through 16) and press the hand again. # # NOTE!! The lirc_atiusb driver now removes the channel code # from key-codes (by default). This effectively outputs codes # for remote channel 1. You can change this behavior by # loading the module with unique=1. Type `modinfo lirc_atiusb` # for details. begin remote name ATIUSB_5000015900A bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 139944 toggle_bit 0 begin codes A 0x000000000000F500 B 0x000000000000F601 C 0x0000000000000E19 D 0x000000000000101B E 0x0000000000001621 F 0x0000000000001823 TV 0x000000000000F803 DVD 0x000000000000F904 WEB 0x000000000000FA05 BOOK 0x000000000000FB06 HAND 0x000000000000FC07 POWER 0x000000000000F702 MOUSE_LEFT_BTN 0x0000000000006D78 MOUSE_RIGHT_BTN 0x000000000000717C MOUSE_UP 0x0000000000006772 MOUSE_DOWN 0x0000000000006B76 MOUSE_LEFT 0x0000000000006C77 MOUSE_RIGHT 0x0000000000006B76 VOL_UP 0x000000000000FD08 VOL_DOWN 0x000000000000FE09 MUTE 0x000000000000FF0A CH_UP 0x000000000000000B CH_DOWN 0x000000000000010C 1 0x000000000000020D 2 0x000000000000030E 3 0x000000000000040F 4 0x0000000000000510 5 0x0000000000000611 6 0x0000000000000712 7 0x0000000000000813 8 0x0000000000000914 9 0x0000000000000A15 0 0x0000000000000C17 LIST 0x0000000000000B16 CHECK 0x0000000000000D18 UP 0x0000000000000F1A DOWN 0x0000000000001722 LEFT 0x000000000000121D RIGHT 0x000000000000141F OK 0x000000000000131E TIMER 0x000000000000111C MAX 0x0000000000001520 REWIND 0x0000000000001924 PLAY 0x0000000000001A25 FFWD 0x0000000000001B26 REC 0x0000000000001C27 STOP 0x0000000000001D28 PAUSE 0x0000000000001E29 end codes end remote # # this config file was automatically generated # using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 # # contributed by Jason Piterak # # brand: ATI # model no. of remote control: 5000022000 # # devices being controlled by this remote: # MythTV PVR using knopmyth by Cecil and Dale at # http://mysettopbox.tv # Key map names are as per ATI's website: # http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html # Feel free to change them as you see fit :-) # # NOTE: There are 16 channels for this remote; this file only # supports one channel. See the GATOS project for information # on how to change the channel. Not tested. Unknown channel. # # also reported by Jeffrey Barnhill to work with model 5000023600 while # the dedicated section below did not work begin remote name ATIUSB_5000022000 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0000 gap 139891 toggle_bit 0 begin codes a 0x000000000000C500 b 0x000000000000C601 power 0x000000000000C702 tv 0x000000000000C803 dvd 0x000000000000C904 web 0x000000000000CA05 media_library 0x000000000000CB06 drag 0x000000000000CC07 mouse-button_left 0x0000000000003D78 mouse-button_right 0x000000000000417C mouse-up 0x0000000000003772 mouse-down 0x0000000000003873 mouse-left 0x0000000000003570 mouse-right 0x0000000000003671 mouse-left_up 0x0000000000003974 mouse-right_up 0x0000000000003A75 mouse-left_down 0x0000000000003C77 mouse-right_down 0x0000000000003B76 vol-up 0x000000000000CD08 vol-down 0x000000000000CE09 mute 0x000000000000CF0A chan-up 0x000000000000D00B chan-down 0x000000000000D10C 1 0x000000000000D20D 2 0x000000000000D30E 3 0x000000000000D40F 4 0x000000000000D510 5 0x000000000000D611 6 0x000000000000D712 7 0x000000000000D813 8 0x000000000000D914 9 0x000000000000DA15 0 0x000000000000DC17 dvd-root_menu 0x000000000000DB16 launch_setup 0x000000000000DD18 c 0x000000000000DE19 d 0x000000000000E01B tv_on_demand 0x000000000000E11C max_window 0x000000000000E520 cursor-up 0x000000000000DF1A cursor-down 0x000000000000E722 cursor-left 0x000000000000E21D cursor-right 0x000000000000E41F ok 0x000000000000E31E e 0x000000000000E621 f 0x000000000000E823 rewind 0x000000000000E924 play 0x000000000000EA25 fast_forward 0x000000000000EB26 record 0x000000000000EC27 stop 0x000000000000ED28 pause 0x000000000000EE29 end codes end remote # # this config file was automatically generated # using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004 # # contributed by Jurgen Kramer # # brand: ATI # model no. of remote control: 5000023600 # devices being controlled by this remote: MythTV 0.14 # # USB ID: 0bc7:0004 # begin remote name ATIUSB_5000023600 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 227972 min_repeat 4 toggle_bit 0 begin codes 1 0x000000000000920D 2 0x000000000000930E 3 0x000000000000940F 4 0x0000000000009510 5 0x0000000000009611 6 0x0000000000009712 7 0x0000000000009813 8 0x0000000000009914 9 0x0000000000009A15 a 0x0000000000008500 b 0x0000000000008601 power 0x0000000000008702 tv 0x0000000000008803 dvd 0x0000000000008904 web 0x0000000000008A05 media_library 0x0000000000008B06 drag 0x0000000000008C07 0 0x0000000000009C17 c 0x0000000000009E19 d 0x000000000000A01B mute 0x0000000000008F0A tv_on_demand 0x000000000000A11C max_window 0x000000000000A520 e 0x000000000000A621 f 0x000000000000A823 ok 0x000000000000A31E left 0x000000000000A21D right 0x000000000000A41F up 0x0000000000009F1A down 0x000000000000A722 rewind 0x000000000000A924 play 0x000000000000AA25 forward 0x000000000000AB26 record 0x000000000000AC27 stop 0x000000000000AD28 pause 0x000000000000AE29 mouse_button_left 0x000000000000FD78 mouse_button_right 0x000000000000017C vol-down 0x0000000000008E09 vol-up 0x0000000000008D08 chan-down 0x000000000000910C chan-up 0x000000000000900B mouse-up 0x000000000000F772 mouse-down 0x000000000000F873 mouse-left 0x000000000000F570 mouse-right 0x000000000000F671 mouse-left_up 0x000000000000F974 mouse-left_down 0x000000000000FC77 mouse-right_up 0x000000000000FA75 mouse-right_down 0x000000000000FB76 dvd-root_menu 0x0000000000009B16 launch_setup 0x0000000000009D18 end codes end remote # # this config file was automatically generated # using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005 # # contributed by Raphal Doursenaud (rdoursenaud@free.fr) # # brand: Sapphire (ATI) # model no. of remote control: 5000023600 # devices being controlled by this remote: xmms, tvtime # begin remote name SAPPHIRE_ATIUSB_5000023600 bits 40 eps 30 aeps 100 one 0 0 zero 0 0 gap 227990 toggle_bit 0 begin codes 1 0x00000014E20D0000 2 0x00000014E30E0000 3 0x00000014E40F0000 4 0x00000014E5100000 5 0x00000014E6110000 6 0x00000014E7120000 7 0x00000014E8130000 8 0x00000014E9140000 9 0x00000014EA150000 a 0x00000014D5000000 b 0x00000014D6010000 power 0x00000014D7020000 tv 0x00000014D8030000 dvd 0x00000014D9040000 web 0x00000014DA050000 media_library 0x00000014DB060000 drag 0x00000014DC070000 0 0x00000014EC170000 c 0x00000014EE190000 d 0x00000014F01B0000 mute 0x00000014DF0A0000 tv_on_demand 0x00000014F11C0000 max_window 0x00000014F5200000 e 0x00000014F6210000 f 0x00000014F8230000 ok 0x00000014F31E0000 left 0x00000014F21D0000 right 0x00000014F41F0000 up 0x00000014EF1A0000 down 0x00000014F7220000 rewind 0x00000014F9240000 play 0x00000014FA250000 forward 0x00000014FB260000 record 0x00000014FC270000 stop 0x00000014FD280000 pause 0x00000014FE290000 mouse_button_left 0x000000144D780000 mouse_button_right 0x00000014517C0000 vol-down 0x00000014DE090000 vol-up 0x00000014DD080000 chan-down 0x00000014E10C0000 chan-up 0x00000014E00B0000 mouse-up 0x0000001447720000 mouse-down 0x0000001448730000 mouse-left 0x0000001445700000 mouse-right 0x0000001446710000 mouse-left_up 0x0000001449740000 mouse-left_down 0x000000144C770000 mouse-right_up 0x000000144A750000 mouse-right_down 0x000000144B760000 dvd-root_menu 0x00000014EB160000 launch_setup 0x00000014ED180000 end codes end remote # lircd.conf for X-10 Lola remote # # this config file was automatically generated # using lirc-0.6.6(any) on Sat May 15 14:41:38 2004 # matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc # # # brand: X-10 Lola # model no. of remote control: UR89A # devices being controlled by this remote: mythtv # begin remote name X-10_Lola bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 219972 toggle_bit 0 begin codes up 0x000000000000600B down 0x000000000000610C left 0x0000000000005D08 right 0x0000000000005E09 M 0x0000000000005F0A 1 0x000000000000620D 2 0x000000000000630E 3 0x000000000000640F 4 0x0000000000006510 5 0x0000000000006611 6 0x0000000000006712 7 0x0000000000006813 8 0x0000000000006914 9 0x0000000000006A15 0 0x0000000000006C17 a-d 0x0000000000006B16 a-b 0x0000000000006D18 pageup 0x000000000000711C pagedown 0x0000000000007520 T 0x000000000000832E E 0x000000000000842F F 0x0000000000005C07 S 0x0000000000008530 scan- 0x000000000000802B rew 0x0000000000007924 play 0x0000000000007A25 ff 0x0000000000007B26 scan+ 0x0000000000007F2A rec 0x0000000000007C27 stop 0x0000000000007D28 pause 0x0000000000007E29 playlist 0x0000000000005601 playing 0x000000000000822D enter 0x000000000000731E eu 0x0000000000006F1A ed 0x0000000000007722 el 0x000000000000721D er 0x000000000000741F alb 0x0000000000006E19 art 0x000000000000701B gen 0x0000000000007621 trk 0x0000000000007823 end codes end remote # # this config file was automatically generated # using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004 # # contributed by Julien Damon # # brand: microapp6in1 # see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184 # distributed in France # model no. of remote control: 4184(UR86E) # devices being controlled by this remote: # # sold by Pearl as Q-Sonic Master Remote 6in1 PC # begin remote name microapp6in1 bits 40 eps 30 aeps 100 one 0 0 zero 0 0 gap 203993 toggle_bit 0 begin codes num_1 0x00000020EE11820D num_2 0x00000020EE11420D num_3 0x00000020EE11C20D num_4 0x00000020EE11220D num_5 0x00000020EE11A20D num_6 0x00000020EE11620D num_7 0x00000020EE11E20D num_8 0x00000020EE11120D num_9 0x00000020EE11920D num_0 0x00000020EE11020D AV 0x00000020EE11BA05 ok 0x00000020EE11520D up 0x00000020EE11D50A left 0x00000020EE11D20D right 0x00000020EE11D10E down 0x00000020EE11D30C exit 0x00000020EE11C906 menu 0x00000020EE11B609 mute 0x00000020EE11A00F vol+ 0x00000020EE11600F vol- 0x00000020EE11E00F ch+ 0x00000020EE11400F ch- 0x00000020EE11C00F hand 0x00000014307B0000 skip_left 0x00000020EE113A05 skip_right 0x00000020EE11D807 play 0x00000020EE11B00F backward 0x00000020EE113807 forward 0x00000020EE11B807 pause 0x00000020EE11720D stop 0x00000020EE11FF00 record 0x00000020EE11700F clic_left 0x000000142D780000 clic_right 0x00000014317C0000 mouse_up 0x0000001427720000 mouse_down 0x0000001428730000 mouse_right 0x0000001426710000 mouse_left 0x0000001425700000 mouse_up_right 0x000000142A750000 mouse_down_right 0x000000142B760000 mouse_up_left 0x0000001429740000 mouse_down_left 0x000000142C770000 power 0x00000020EE11F00F # additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC leftbtn_up 0x000000142e790000 rightbtn_up 0x00000014327d0000 pc 0x00000020ee11d40b end codes end remote # this config file was automatically generated # using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004 # # contributed by Martin Tomasek # # brand: ATI Remote Wonder # model no. of remote control: # devices being controlled by this remote: ATI USB Receiver (X10). # # * remote is set to channel 1, driver reports channel 16. don't know # which is true. # # P: Vendor=0bc7 ProdID=0004 Rev= 1.00 # S: Manufacturer=X10 Wireless Technology Inc # S: Product=USB Receiver # begin remote name atiusb_ch1 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 227933 toggle_bit 0 begin codes A 0x000000000000D500 B 0x000000000000D601 C 0x000000000000EE19 D 0x000000000000F01B E 0x000000000000F621 F 0x000000000000F823 POWER 0x000000000000D702 TV 0x000000000000D803 DVD 0x000000000000D904 WEB 0x000000000000DA05 BOOK 0x000000000000DB06 HAND 0x000000000000DC07 MOUSE_LEFT_BTN 0x0000000000004D78 MOUSE_RIGHT_BTN 0x000000000000517C MOUSE_LEFT 0x0000000000004570 MOUSE_RIGHT 0x0000000000004671 MOUSE_UP 0x0000000000004772 MOUSE_DOWN 0x0000000000004873 VOL_UP 0x000000000000DD08 VOL_DOWN 0x000000000000DE09 MUTE 0x000000000000DF0A CH_UP 0x000000000000E00B CH_DOWN 0x000000000000E10C 1 0x000000000000E20D 2 0x000000000000E30E 3 0x000000000000E40F 4 0x000000000000E510 5 0x000000000000E611 6 0x000000000000E712 7 0x000000000000E813 8 0x000000000000E914 9 0x000000000000EA15 0 0x000000000000EC17 LIST 0x000000000000EB16 CHECK 0x000000000000ED18 UP 0x000000000000EF1A DOWN 0x000000000000F722 LEFT 0x000000000000F21D RIGHT 0x000000000000F41F OK 0x000000000000F31E TIMER 0x000000000000F11C MAXIMIZE 0x000000000000F520 REW 0x000000000000F924 FFWD 0x000000000000FB26 PLAY 0x000000000000FA25 STOP 0x000000000000FD28 RECORD 0x000000000000FC27 PAUSE 0x000000000000FE29 end codes end remote # # this config file was automatically generated # using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004 # # contributed by Phil Speights # # brand: nvidia # model no. of remote control: UR88A # devices being controlled by this remote: nvidia personal cinema # begin remote name ATIUSB_UR88A bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 243948 toggle_bit 0 begin codes mouse-up 0x4A75 mouse-right_up 0x4A75 mouse-right 0x4671 mouse-right_down 0x4B76 mouse-down 0x4B76 mouse-left_down 0x4873 mouse-left 0x4C77 mouse-left_up 0x4772 esc 0xDF0A mouse-button_left 0x4D78 mouse-button_right 0x517C 1 0xE20D 2 0xE30E 3 0xE40F 4 0xE510 5 0xE611 6 0xE712 7 0xE813 8 0xE914 9 0xEA15 0 0xEC17 stop 0xFD28 play 0xFA25 fastfoward 0xFB26 rewind 0xF924 pause 0xFE29 record 0xFC27 previous 0xF621 next 0xF823 up 0xEF1A down 0xF722 right 0xF41F left 0xF21D web 0xDC07 music 0xDB06 photo 0xDA05 dvd/vcd 0xD904 dvr 0xD803 mute 0xD500 playlist 0xD601 chsurf 0xD702 dvdmenu 0xEE19 txt 0xEB16 snapshots 0xED18 setup 0xF01B audio 0xF11C slow 0xF520 ok 0xF31E vol+ 0xDE09 vol- 0xDD08 chan- 0xE10C chan+ 0xE00B zoom 0xFF2A angle 0x002B end codes end remote # # this config file was automatically generated # using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005 # # contributed by Dirk Aust # # brand: Medion, Made by X10, China # Remote P/N: 20016398 # Receiver P/N: 20016397 # # bundled with bundled with Titanium TD8008 and TD8080 Aldi PC begin remote name Medion bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 139873 toggle_bit 0 begin codes TV 0x012C VCR 0x022D DVD 0xD904 MUSIC 0xDB06 RADIO 0x032E PHOTO 0xDA05 TV_PREVIEW 0x042F CHANNEL_LIST 0x0530 SETUP 0xF01B VIDEO_DESKTOP 0x0631 CHAN+ 0xE00B VOL- 0xDD08 MUTE 0xD500 VOL+ 0xDE09 CHAN- 0xE10C RED 0x0732 GREEN 0x0833 YELLOW 0x0934 BLUE 0x0A35 TXT 0xEB16 1 0xE20D 2 0xE30E 3 0xE40F 4 0xE510 5 0xE611 6 0xE712 7 0xE813 8 0xE914 9 0xEA15 TV/RADIO 0xF11C 0 0xEC17 DELETE 0xF520 RENAME 0x0B36 SNAPSHOT 0xED18 UP 0xEF1A LEFT 0xF21D OK 0xF31E RIGHT 0xF41F DOWN 0xF722 ACQ_IMAGE 0x0C37 EDIT_IMAGE 0x0D38 REW 0xF924 PLAY 0xFA25 FFW 0xFB26 RECORD 0xFC27 STOP 0xFD28 PAUSE 0xFE29 PREV 0xF621 FULL 0x0E39 NEXT 0xF823 DVD_MENU 0xEE19 DVD_AUDIO 0x0F3A POWER 0xD702 end codes end remote # this config file was automatically generated # using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 # # contributed by Steffen # # brand: ATI Sapphire Remote Bob II USB # model no. of remote control: 5000024400 # devices being controlled by this remote: ASUS Digimatrix MythTV PVR # begin remote name 5000024400 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x0 post_data_bits 16 post_data 0x0 gap 299851 toggle_bit 0 begin codes aux1 0x023F aux2 0x023F aux3 0x023F aux4 0x023F leftmouse 0x02A9 rightmouse 0x02AA a 0x0278 b 0x0279 power 0x020C dvd 0x0238 tv 0x0239 help 0x02BE pc 0x023F resize 0x02D5 hand 0x02D0 ati 0x028E vol-up 0x0210 vol-down 0x0211 mute 0x020D chan-up 0x0220 chan-down 0x0221 mouse-up 0x013F mouse-down 0x013F mouse-left 0x013F mouse-right 0x013F 1 0x0201 2 0x0202 3 0x0203 4 0x0204 5 0x0205 6 0x0206 7 0x0207 8 0x0208 9 0x0209 0 0x0200 list 0x0254 check 0x0282 info 0x02F9 timer 0x0296 up 0x0258 left 0x025A right 0x025B down 0x0259 ok 0x025C c 0x017A d 0x027B play 0x022C e 0x027C f 0x027D rewind 0x0229 rec 0x0237 stop 0x0231 pause 0x0230 ffwd 0x0228 end codes end remote # # this config file was automatically generated # using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005 # # contributed by # # brand: Niveus # model no. of remote control: # devices being controlled by this remote: Niveus X10 # begin remote name Niveus_X10 bits 40 eps 30 aeps 100 one 0 0 zero 0 0 gap 203974 toggle_bit 0 begin codes power 0x00000020EE11F00F mouse-up 0x0000001447720000 mouse-down 0x0000001448730000 mouse-left 0x0000001445700000 mouse-right 0x0000001446710000 mouse-up-left 0x0000001449740000 mouse-up-right 0x000000144A750000 mouse-down-left 0x000000144C770000 mouse-down-right 0x000000144B760000 mouse-left-click 0x000000144D780000 mouse-right-click 0x00000014517C0000 mouse-drag 0x00000014507B0000 vol- 0x00000020EE01E00F vol+ 0x00000020EE81600F ch- 0x00000020EEE1C00F ch+ 0x00000020EE61400F mute 0x00000020EEC1A00F 1 0x00000020EEA1820D 2 0x00000020EE61420D 3 0x00000020EEE1C20D 4 0x00000020EE41220D 5 0x00000020EEC1A20D 6 0x00000020EE81620D 7 0x00000020EE01E20D 8 0x00000020EE31120D 9 0x00000020EEB1920D ent 0x00000020EE71520D 0 0x00000020EE21020D a-b 0x00000020EED1BA05 a 0x00000020EE513A05 b 0x00000020EEF1D807 c 0x00000020EEF1D609 d 0x00000020EEF1D906 menu 0x00000020EED1B609 exit 0x00000020EEE1C906 up 0x00000020EEF1D50A down 0x00000020EEF1D30C left 0x00000020EEF1D20D right 0x00000020EEF1D10E ok 0x00000020EE71520D rew 0x00000020EE513807 play 0x00000020EED1B00F ff 0x00000020EED1B807 rec 0x00000020EE11FF00 stop 0x00000020EE91700F pause 0x00000020EE91720D end codes end remote # # this config file was manually generated # Time-stamp: <2006-11-09 10:15:33 root> # # contributed by Heike C. Zimmerer # # brand: Medion MD95700 DVB-T USB box RF remote # driver: lirc_atiusb # # # Remote ID # # You can give your remote a unique ID and instruct lirc_atiusb # to only accept signals from specific IDs and mask out the others. # # To set the ID, hold the select buttun (the only transparent one, # positioned betwenn volume up/down and channel up/down) down until # the LED begins to blink. Then enter the channel number (1 through # 16) and press the button again. # # By counting the blinks, you can read out the actual ID your remote # currently is set to. # # Loading the lirc_atiusb driver with "unique=1,mask=0x10" makes it # recognize only ID 5. Each bit in the mask corresponds to one ID, # counting from Bit #0 = ID #1 up to Bit #15 = ID #16. So "mask=0x21" # will let it recognize both IDs #6 and #1, "mask=8" connects only to # ID #4, and "mask=0xffff" accepts all. # # # UP and DOWN acceleration # # the "up" and "down" key names have a trailing underscore followed by # numbers from 0 to 7 to reflect the motion speed of the up/down # wheel. You might remove both characters if you aren't interested in # getting acceleration values. begin remote name ATIUSB_MEDION_MD95700 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 139944 toggle_bit_mask 0x80800000 begin codes 1 0x628d 2 0x638e 3 0x648f 4 0x6590 5 0x6691 6 0x6792 7 0x6893 8 0x6994 9 0x6a95 0 0x6c97 Power 0xd702 TV 0x81ac Video 0x82ad CD/DVD 0x5984 Teletext 0x6b96 Audio 0x5b86 Radio 0x83ae Guide 0x86b1 Photo 0x5a85 Info 0x84af Menu 0x6e99 left 0x729d up_0 0x4d78 up_1 0x4e79 up_2 0x4f7a up_3 0x507b up_4 0x517c up_5 0x527d up_6 0x537e up_7 0x547f down_0 0x4570 down_1 0x4671 down_2 0x4772 down_3 0x4873 down_4 0x4974 down_5 0x4a75 down_6 0x4b76 down_7 0x4c77 Click 0xf31e right 0x749f Back 0xf520 Vol+ 0xde09 Vol- 0xdd08 Select 0xf01b P+ 0xe00b P- 0xe10c Mute 0x5580 Zap 0x719c Red/Audio 0x87b2 Green/Subtitle 0x88b3 Yellow/Angle 0x89b4 Blue/Title 0x8ab5 Stop 0x7da8 Pause 0x7ea9 Play 0x7aa5 SkipBack 0x76a1 Folder 0x6d98 SkipForward 0x78a3 Rewind 0x79a4 Record 0x7ca7 FastForward 0x7ba6 end codes end remote # # this config file was automatically generated # using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005 # # contributed by a_matteur # # brand: MEDION X10 RF # model no. of remote control: remote P/N:20014752, receiver P/N:20014751 # devices being controlled by this remote: # begin remote name MEDION_X10_RF bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 235923 toggle_bit 0 begin codes tv 0x012C vcr 0x022D dvd 0x0904 music 0x0B06 radio 0x032E photo 0x0A05 tvpreview 0x042F channellist 0x0530 setup 0x001B videodesktop 0x0631 ch+ 0x000B ch- 0x010C vol+ 0x0E09 vol- 0x0D08 mute 0x0500 red 0x0732 green 0x0833 yellow 0x0934 blue 0x0A35 txt 0x0B16 0 0x0C17 1 0x020D 2 0x030E 3 0x040F 4 0x0510 5 0x0611 6 0x0712 7 0x0813 8 0x0914 9 0x0A15 tvradio 0x011C delete 0x0520 rename 0x0B36 snapshot 0x0D18 up 0x0F1A down 0x0722 left 0x021D right 0x041F ok 0x031E acquireimage 0x0C37 editimage 0x0D38 play 0x0A25 pause 0x0E29 stop 0x0D28 forward 0x0B26 rewind 0x0924 next 0x0823 prev 0x0621 record 0x0C27 fullscreen 0x0E39 dvdmenu 0x0E19 dvdaudio 0x0F3A power 0x0702 end codes end remote # # this config file was automatically generated # using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005 # # contributed by: Peter J. Weyers # # brand: MEDION / ATI # model no. of remote control: 40005927 # devices being controlled by this remote: # # This is an USB attached reciever wich works by radio, not by IR. It is # most probably a relabeled ATI X10 device and sold together with the # Medion Notebook MD41300. It works with the lirc_atiusb driver while the # ati_remote module is NOT(!) loaded begin remote name MEDION_40005927 bits 40 eps 30 aeps 100 one 0 0 zero 0 0 gap 227972 toggle_bit 0 begin codes TV_DVD 0x1481AC0000 VIDEO 0x1482AD0000 PHOTO 0x1459840000 MUSIC 0x145B860000 PC 0x1483AE0000 MUTE 0x1455800000 OK 0x14739E0000 UP 0x146F9A0000 DOWN 0x1477A20000 LEFT 0x14729D0000 RIGHT 0x14749F0000 CH+ 0x145E890000 CH- 0x145D880000 VOL+ 0x14608B0000 VOL- 0x14618C0000 PLAY_PAUSE 0x147AA50000 RECORD 0x147CA70000 STOP 0x147DA80000 FRWND 0x1479A40000 FFWD 0x147BA60000 PREV 0x1476A10000 NEXT 0x1478A30000 1 0x14628D0000 2 0x14638E0000 3 0x14648F0000 4 0x1465900000 5 0x1466910000 6 0x1467920000 7 0x1468930000 8 0x1469940000 9 0x146A950000 0 0x146C970000 RC 0x1484AF0000 Screen_Symbol 0x146B960000 end codes end remote # # this config file was automatically generated # using lirc-0.7.1pre2(any) on Tue Aug 22 20:53:57 2006 # # contributed by Patrick-Thomas Chmielewski (www.ptch.de) # # brand: Medion X10 # model no. of remote control: P/N 40009936 # devices being controlled by this remote: P/N 40009937 # begin remote name Medion_X10 bits 40 eps 30 aeps 100 one 0 0 zero 0 0 gap 227969 min_repeat 2 toggle_bit_mask 0x80800000 begin codes ok 0x14F31E0000 power 0x14D7020000 tv 0x1481AC0000 video 0x1482AD0000 cd 0x1459840000 txt 0x146B960000 audio 0x145B860000 radio 0x1483AE0000 book 0x1486B10000 photo 0x145A850000 info 0x1484AF0000 menu 0x146E990000 up 0x14CDF80000 down 0x14C5F00000 left 0x14729D0000 right 0x14749F0000 return 0x1475A00000 vol+ 0x145E890000 vol- 0x145D880000 mute 0x1455800000 ch+ 0x14608B0000 ch- 0x14618C0000 last 0x14719C0000 red 0x1487B20000 green 0x1488B30000 yellow 0x1409340000 blue 0x140A350000 stop 0x147DA80000 pause 0x14FE290000 play 0x14FA250000 back 0x14F6210000 time 0x146D980000 next 0x14F8230000 rew 0x14F9240000 rec 0x147CA70000 ff 0x14FB260000 1 0x14E20D0000 2 0x14E30E0000 3 0x14E40F0000 4 0x14E5100000 5 0x14E6110000 6 0x14E7120000 7 0x14E8130000 8 0x14E9140000 9 0x14EA150000 0 0x14EC170000 end codes end remote # # this config file was hand crafted for # lirc-0.8.0(atiusb) on Sun June 11 22:49:23 2006 # # contributed by Ted Schipper # # brand: Medion 8802 # Remote P/N: 20029724 # Receiver P/N: 20024123 # model no. of remote control: Medion RF remote # devices being controlled by this remote: Medion 8802 Multimedia Home Entertainment Design Center # begin remote name Medion_8802 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 227999 min_repeat 5 toggle_bit_mask 0x80800000 begin codes Line_TV 0x719C Rec_TV 0x6D98 On/Standby 0xD702 Photo 0x5A85 Music 0x5B86 Guide 0x0631 DVD_Menu 0x5984 Video 0x022D Text 0x6B96 RED/Audio 0x0732 YELLOW/Angle 0x0934 BLUE/Title 0x0A35 GREEN/Subtitle 0x0833 Vol+ 0x5E89 Vol- 0x5D88 Up 0x6F9A Down 0x77A2 Left 0x729D Right 0x749F Ok 0x739E Mute 0x5580 Ch+ 0x608B Ch- 0x618C 1 0x628D 2 0x638E 3 0x648F 4 0x6590 5 0x6691 6 0x6792 7 0x6893 8 0x6994 9 0x6A95 * 0x0C37 0 0x6C97 # 0x0D38 Back 0x75A0 Info 0x042F Select 0x709B Rewind 0x79A4 Play 0x7AA5 Fast_Forward 0x7BA6 Pause 0x7EA9 Start 0x76A1 End 0x78A3 Stop 0x7DA8 Record 0x7CA7 end codes end remote # this config file was automatically generated # using lirc-0.8.0(atiusb) on Mon Dec 11 20:45:22 2006 # # contributed by Wim Lemmers # # brand: Medion # model no. of remote control: OR24E RF MCE Remote Control # devices being controlled by this remote: Mythtv Linux # begin remote name Medion_OR24E bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 228011 min_repeat 3 toggle_bit 0 begin codes on_off 0xD702 teletext 0xEB16 yellow 0x89B4 red 0x0732 green 0x88B3 blue 0x0A35 tv_rec 0x6D98 dvd 0xD904 epg 0x86B1 tv 0xF11C back 0x75A0 info 0x042F vol+ 0x5E89 vol- 0xDD08 mute 0x5580 prog+ 0xE00B prog- 0x618C up 0xEF1A down 0x77A2 left 0xF21D right 0x749F ok 0xF31E windows 0x709B previous 0xF621 next 0x78A3 backward 0xF924 forward 0x7BA6 play 0xFA25 stop 0x7DA8 still 0xFE29 record 0x7CA7 1 0xE20D 2 0x638E 3 0xE40F 4 0x6590 5 0xE611 6 0x6792 7 0xE813 8 0x6994 9 0xEA15 0 0x6C97 * 0x0C37 # 0x8DB8 clear 0x0530 enter 0x8BB6 end codes end remote # # this config file was automatically generated # using lirc-0.8.1pre5(default) on Tue Mar 6 19:31:31 2007 # # contributed by Harald Wild - www.wild-technology.de # # brand: Q-Sonic Master Remote PC / TV # model no. of remote control: Art.Nr. PE-9999 # frequency: 433.92 MHz # distributor Germany: PEARL AGENCY - www.pearl.de # devices being controlled by this remote: MythTv # begin remote name Q-Sonic_Master_Remote bits 40 eps 30 aeps 100 one 0 0 zero 0 0 gap 203972 toggle_bit 0 begin codes POWER 0x20EE11F00F MouseLEFT 0x1449740000 MouseRIGHT 0x1446710000 MouseUP 0x1447720000 MouseDOWN 0x1448730000 MouseButtonLEFT 0x144D780000 MouseButtonRIGHT 0x14517C0000 Volume+ 0x20EE81600F Volume- 0x20EE01E00F Channel+ 0x20EE61400F Channel- 0x20EEE1C00F M 0x20EEC1A00F 1 0x20EEA1820D 2 0x20EE61420D 3 0x20EEE1C20D 4 0x20EE41220D 5 0x20EEC1A20D 6 0x20EE81620D 7 0x20EE01E20D 8 0x20EE31120D 9 0x20EEB1920D 0 0x20EE21020D -/-- 0x20EE71520D AV 0x20EED1BA05 MENU 0x20EED1B609 EXIT 0x20EEE1C906 VideoTextLO 0x20EED1B609 VideoTextRO 0x20EEE1C906 VideoTextLU 0x20EE513A05 VideoTextRU 0x20EEF1D807 UP 0x20EEF1D50A DOWN 0x20EEF1D30C LEFT 0x20EEF1D20D RIGHT 0x20EEF1D10E OK 0x20EE71520D PLAY 0x20EED1B00F << 0x20EE513807 >> 0x20EED1B807 REC 0x20EE11FF00 STOP 0x20EE91700F PAUSE 0x20EE91720D end codes end remote # This config file was automatically generated # using lirc-0.8.2-CVS(lirc_atiusb) on Wed Feb 10.03.2007 # # contributed by boris64 (me@boris64.net ;) # # brand: "AR Remote Control MCE" # "Made in China by X10" # grey/silver colored with "MS-Logo" # model no.: "1040050" # # devices being controlled by this remote: # PCs running "Microsoft MediaCenterEdition(?)" # # some pictures/infos of this remote can be found here: # -> http://www.mce-community.de/forum/index.php?showtopic=11652&hl=x # -> http://cgi.ebay.de/MCE-Fernbedienung-WINDOWS-XP-Media-Center-Zertifiziert_W0QQitemZ8810664119QQcategoryZ38861QQrdZ1QQcmdZViewItem # begin remote name AR_Remote_Control_MCE bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 227995 toggle_bit_mask 0x80800000 begin codes POWER 0xD702 RED 0x87B2 YELLOW 0x0934 GREEN 0x88B3 BLUE 0x0A35 TELETEXT 0x6B96 BACKSPACE 0xF520 INFO 0x84AF UP 0xEF1A LEFT 0x729D RIGHT 0xF41F DOWN 0x77A2 OK 0xF31E TIMESHIFT 0x6D98 EPG 0x0631 TV/FM 0x719C CD/DVD 0xD904 M$LOGO 0x709B VOL+ 0xDE09 VOL- 0x5D88 CHAN+ 0xE00B CHAN- 0x618C MUTE 0xD500 PREV 0x76A1 NEXT 0xF823 REW 0x79A4 PLAY 0xFA25 FFW 0x7BA6 RECORD 0xFC27 STOP 0x7DA8 PAUSE 0xFE29 1 0x628D 2 0xE30E 3 0x648F 4 0xE510 5 0x6691 6 0xE712 7 0x6893 8 0xE914 9 0x6A95 0 0xEC17 * 0x8CB7 HASH 0x0D38 CLEAR 0x85B0 ENTER 0x0B36 end codes end remote # # this config file was automatically generated # using lirc-0.8.1(default) on Sun May 27 19:55:56 2007 # # contributed by Revertive # # brand: Toshiba X10 # model no. of remote control: PX1246E-1ETC # devices being controlled by this remote: PC(Hauppage PVR-500) # begin remote name Toshiba_X10 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 228000 min_repeat 11 toggle_bit 0 begin codes power 0xD702 red 0x87B2 yellow 0x0934 green 0x88B3 blue 0x0A35 teletext 0x6B96 back 0xF520 info 0x84AF up 0xEF1A down 0x77A2 left 0xF21D right 0x749F ok 0xF31E recordings 0x6D98 dvds 0x5984 tvguide 0x0631 livetv 0x719C volume+ 0x5E89 volume- 0xDD08 channel+ 0x608B channel- 0x618C start 0xF01B mute 0x5580 rewind 0x76A1 forward 0xF823 next 0x79A4 prev 0xFB26 play 0x7AA5 record 0xFC27 stop 0x7DA8 pause 0xFE29 1 0x628D 2 0xE30E 3 0x648F 4 0xE510 5 0x6691 6 0xE712 7 0x6893 8 0xE914 9 0x6A95 0 0xEC17 * 0x8CB7 # 0x0D38 clear 0x85B0 enter 0x0B36 end codes end remote # # this config file was automatically generated # using lirc-0.8.2-CVS(atilibusb) on Fri Jun 8 13:19:29 2007 # # contributed by # # brand: # model no. of remote control: ATI/X10 RF USB Remote Control v. 2.2.1 # devices being controlled by this remote: # # comes with Packard Bell MC9667 # begin remote name ATI_REMOTE_2_2_1 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 139999 toggle_bit_mask 0x0 begin codes POWER 0xD702 TV 0xEB16 RED 0x88B3 GREEN 0x0732 YELLOW 0x89B4 BLUE 0x0A35 TV2 0x81AC CAMCORDER 0x022D MUSIC 0x5B86 CAMERA 0xDA05 TVRECORDER 0x6D98 CD 0xD904 EQUALIZER 0x86B1 TVPLAYER 0xF11C BACK 0x75A0 INFORMATION 0x042F TOP 0x6F9A LEFT 0xF21D OK 0x739E RIGHT 0xF41F DOWN 0x77A2 SOUNDPLUS 0xDE09 SOUNDMINUS 0x5D88 WINDOB 0xF01B CHANNELUP 0x608B CHANNELDOWN 0xE10C MUTE 0x5580 RECORD 0xFC27 STOP 0x7DA8 PAUSE 0xFE29 REWIND 0x79A4 PLAY 0xFA25 FORWARD 0x7BA6 BACKREWIND 0xF621 BACKFORWARD 0x78A3 1 0xE20D 2 0x638E 3 0xE40F 4 0x6590 5 0xE611 6 0x6792 7 0xE813 8 0x6994 9 0xEA15 ASTERISK 0x8CB7 0 0xEC17 DIESE 0x8DB8 CLEAR 0x0530 ENTER 0x8BB6 end codes end remote # # this config file was automatically generated # using lirc-0.8.2(default) on Sun Aug 12 02:13:30 2007 # # contributed by Ben Adler @ gmx dot net # # brand: Medion / X10 (part of http://www.medion.de/md8824/) # remote control: RF Vista Remote Control (OR24V) # P/N: 2003 5335 # devices being controlled by this remote: USB RF remote receiver (CM20E), P/N 2003 1776 begin remote name Medion_X10 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 227978 toggle_bit_mask 0x80800000 begin codes red 0x87B2 yellow 0x0934 blue 0x8AB5 green 0x0833 power 0xD702 text 0xEB16 tvrecord 0x6D98 disc 0xD904 table 0x86B1 tvplay 0xF11C back 0x75A0 info 0x042F volume_up 0x5E89 volume_down 0xDD08 mute 0x5580 channel_up 0xE00B channel_down 0x618C cursor_up 0xEF1A cursor_down 0x77A2 cursor_left 0xF21D cursor_right 0x749F ok 0xF31E start 0x709B track_previous 0xF621 track_next 0x78A3 record 0xFC27 pause 0x7EA9 stop 0xFD28 seek_backward 0x79A4 play 0xFA25 seek_forward 0x7BA6 1 0xE20D 2 0x638E 3 0xE40F 4 0x6590 5 0xE611 6 0x6792 7 0xE813 8 0x6994 9 0xEA15 0 0x6C97 asterisk 0x0C37 hash 0x8DB8 clear 0x0530 enter 0x8BB6 end codes end remote # # this config file was automatically generated # using lirc-0.8.2(default) on Sat Sep 1 00:44:52 2007 # # contributed by Michael Groe Burlage mburlage@web.de # # brand: Medion X10 # model no. of remote control: PN 40013224 # devices being controlled by this remote: Medion MD97000 # begin remote name Medion_X10 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 235987 toggle_bit_mask 0x80800000 begin codes power 0xD702 tvrecordings 0xED18 epg 0x86B1 tv 0xF11C dvd 0x5984 red 0x0732 green 0x88B3 yellow 0x0934 blue 0x8AB5 mute 0xD500 teletext 0x6B96 vol+ 0x5E89 vol- 0xDD08 up 0x6F9A down 0xF722 left 0x729D right 0xF41F ok 0x739E ch+ 0xE00B ch- 0xE10C back 0x75A0 info 0x042F option 0x709B prev 0xF621 next 0x78A3 rew 0xF924 play 0x7AA5 forw 0xFB26 rec 0x7CA7 stopp 0xFD28 pause 0x7EA9 1 0xE20D 2 0x638E 3 0xE40F 4 0x6590 5 0xE611 6 0x6792 7 0xE813 8 0x6994 9 0xEA15 0 0x6C97 asterisk 0x0C37 clear 0x85B0 enter 0x0B36 raute 0x8DB8 end codes end remote # # this config file was automatically generated # using lirc-0.8.1(default) on Sun Jun 17 20:19:04 2007 # # contributed by # # brand: Jasco # model no. of remote control: 97685T # devices being controlled by this remote: USB Wireless Reciever Model 97685R - (lirc_atiusb) # -> Not Infrared <- begin remote name Jasco_97685T bits 24 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0x20EE gap 203971 toggle_bit 0 begin codes last 0x11F20D chan+ 0x61400F chan- 0xE1C00F vol- 0x01E00F vol+ 0x81600F mute 0xC1A00F 1 0xA1820D 2 0x61420D 3 0xE1C20D 4 0x41220D 5 0xC1A20D 6 0x81620D 7 0x01E20D 8 0x31120D 9 0xB1920D 0 0x21020D enter 0x71520D A-B 0xD1BA05 A 0x513A05 B 0xF1D807 C 0xF1D609 D 0xF1D40B menu 0xD1B609 exit 0xE1C906 up 0xF1D50A down 0xF1D30C left 0xF1D20D right 0xF1D10E ok 0x71520D rew 0x513807 play 0xD1B00F ff 0xD1B807 pause 0x91720D stop 0x91700F rec 0x11FF00 end codes end remote # # this config file was automatically generated # using lirc-0.8.2(default) on Sun Jan 27 13:32:13 2008 # # contributed by Frank Reimann, Berlin (capital city of Germany) # # brand: Toshiba # # model no. of remote control: Toshiba MCE Remote Control (X10), # model no. PX1246E-1ETC, model type OR23E, # Universal Remote Control # # devices being controlled by this remote: # RF USB receiver: X10 Wireless Technology, Inc. # Manufacturer: X10 WTI (Made in China by X10) # USB Vendor Id: 0bc7, # USB Product Id: 0006, # Revision Number: 1.00 # Toshiba MCE Remote Control Receiver, # model no. PX1246E-1ETC, model type: CM23E # # Hint: # ~~~~~ # This remote control has two codes per button (see toggle_bit_mask below; XOR). # A button toggles between two states like a toggle switch every time it is # pressed. # The state of a key changes everytime it is pressed and the appropriate code # for the new state is send to the receiver. # If both codes are assigned to the same button name then this button behaves # like a push-button. Both button codes are accepted for the same button name # when option toggle_bit_mask is enabled. # # One more tip: # ~~~~~~~~~~~~~ # You should add a line with "options lirc_atiusb repeat=15" to the distribution # specific module parameters file (like /etc/modules.conf # or /etc/modprobe.conf) for an accurate key recognition. Consult the # documentation of your distribution for further information concerning module # parameters. # Two or more button codes are sent in case default value "repeat=10" is used # and when a button is pressed once. You can try greater values for slower # button code repetition. # # More driver options (module parameters) and additional information are shown # with command "modinfo lirc_atiusb". begin remote name Toshiba_PX1246E-1ETC bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 235969 toggle_bit_mask 0x80800000 begin codes STANDBY 0x5782 RED 0x0732 YELLOW 0x0934 GREEN 0x0833 TELETEXT 0x6B96 BLUE 0x0A35 BACKSPACE 0x75A0 INFO 0x042F UP 0x6F9A LEFT 0x729D OK 0x739E RIGHT 0x749F DOWN 0x77A2 TIMESHIFT 0x6D98 GUIDE 0x0631 LIVE 0x719C DVD 0x5984 VOLUME+ 0x5E89 VOLUME- 0x5D88 SYSTEM-LOGO 0x709B CHANNEL+ 0x608B CHANNEL- 0x618C MUTE 0x5580 PREVIOUS 0x76A1 NEXT 0x78A3 REWIND 0x79A4 PLAY 0x7AA5 FAST-FORWARD 0x7BA6 RECORD 0x7CA7 STOP 0x7DA8 PAUSE 0x7EA9 1 0x628D 2 0x638E 3 0x648F 4 0x6590 5 0x6691 6 0x6792 7 0x6893 8 0x6994 9 0x6A95 ASTERISK 0x0C37 0 0x6C97 HASHMARK 0x0D38 CLEAR 0x0530 ENTER 0x0B36 end codes end remote # # this config file was automatically generated # using lirc-0.8.2(default) on Wed Feb 6 01:32:32 2008 # # contributed by # # brand: Snapstream Firefly # model no. of remote control: R1000 # devices being controlled by this remote: # begin remote name Snapstream_Firefly_R1000 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 235978 toggle_bit_mask 0x80800000 begin codes maximize 0x81AC close 0xD702 1 0x628D 2 0xE30E 3 0x648F 4 0xE510 5 0x6691 6 0xE712 7 0x6893 8 0xE914 9 0x6A95 0 0xEC17 back 0x6B96 ent 0xED18 volup 0x5E89 voldown 0xDD08 mute 0x5F8A chup 0xE00B chdown 0x618C firefly 0xD500 info 0x83AE option 0x042F up 0x6F9A down 0xF722 left 0x729D right 0xF41F ok 0x739E menu 0xF11C exit 0x75A0 rec 0xFC27 play 0x7AA5 stop 0xFD28 rew 0x79A4 prev 0x002B pause 0x7EA9 ffwd 0xFB26 next 0x7FAA music 0xDB06 photo 0x5A85 dvd 0xD904 tv 0x5883 video 0xDC07 help 0x5681 mouse 0x022D a 0x6E99 b 0xF01B c 0x76A1 d 0xF823 end codes end remote # # this config file was automatically generated # using lirc-0.8.2(default) on Thu Oct 4 17:42:33 2007 # # contributed by # # brand: Medion # model no. of remote control: MD1 NBC Remote Control P/N:40008282 # devices being controlled by this remote: X10 # begin remote name Medion_MD1_NBC_Remote bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 8 pre_data 0x14 post_data_bits 16 post_data 0x0 gap 219976 min_repeat 1 toggle_bit_mask 0x80800000 begin codes ONOFF 0xD702 TV 0x81AC Video 0x022D CDDVD 0x5984 Txt 0xEB16 Audio 0x5B86 Radio 0x032E Book 0x86B1 Photo 0xDA05 Info 0x84AF Menu 0xEE19 Back 0x75A0 Left 0xF21D Right 0x749F RollUp1 0x4D78 RollUp2 0xCEF9 RollUp3 0x4F7A RollUp4 0xD1FC RollDown1 0x4570 RollDown2 0xC5F0 RollDown3 0xC7F2 RollDown4 0x4A75 Enter 0xF31E VolUp 0x5E89 VolDown 0xDD08 Mute 0x5580 Select 0xF01B ProgUp 0x608B ProgDown 0xE10C Invers 0x719C MAudio 0x0732 MSubtitle 0x88B3 MAngle 0x0934 MTitle 0x8AB5 Stop 0xFD28 Pause 0x7EA9 Play 0xFA25 Previous 0x76A1 Picture 0xED18 Next 0x78A3 FastRewind 0xF924 REC 0x7CA7 FastForward 0xFB26 1 0x628D 2 0xE30E 3 0x648F 4 0xE510 5 0x6691 6 0xE712 7 0x6893 8 0xE914 9 0x6A95 0 0xEC17 end codes end remote begin remote name Snapstream Firefly bits 40 eps 30 aeps 100 one 0 0 zero 0 0 gap 219964 toggle_bit 0 begin codes MAXI 0x0000001481AC0000 MAXI 0x00000014012C0000 CLOSE 0x00000014D7020000 CLOSE 0x0000001457820000 1 0x00000014628D0000 1 0x00000014E20D0000 2 0x00000014E30E0000 2 0x00000014638E0000 3 0x00000014648F0000 3 0x00000014E40F0000 4 0x00000014E5100000 4 0x0000001465900000 5 0x0000001466910000 5 0x00000014E6110000 6 0x00000014E7120000 6 0x0000001467920000 7 0x0000001468930000 7 0x00000014E8130000 8 0x00000014E9140000 8 0x0000001469940000 9 0x000000146A950000 9 0x00000014EA150000 0 0x00000014EC170000 0 0x000000146C970000 BACK 0x000000146B960000 BACK 0x00000014EB160000 ENT 0x00000014ED180000 ENT 0x000000146D980000 VOL+ 0x000000145E890000 VOL+ 0x00000014DE090000 VOL- 0x000000145D880000 VOL- 0x00000014DD080000 MUTE 0x000000145F8A0000 MUTE 0x00000014DF0A0000 FIREFLY 0x0000001455800000 FIREFLY 0x00000014D5000000 CH+ 0x00000014608B0000 CH+ 0x00000014E00B0000 CH- 0x00000014618C0000 CH- 0x00000014E10C0000 INFO 0x0000001483AE0000 INFO 0x00000014032E0000 OPTION 0x0000001484AF0000 OPTION 0x00000014042F0000 UP 0x000000146F9A0000 UP 0x00000014EF1A0000 LEFT 0x00000014729D0000 LEFT 0x00000014F21D0000 DOWN 0x0000001477A20000 DOWN 0x00000014F7220000 RIGHT 0x00000014749F0000 RIGHT 0x00000014F41F0000 OK 0x00000014739E0000 OK 0x00000014F31E0000 MENU 0x00000014719C0000 MENU 0x00000014F11C0000 EXIT 0x0000001475A00000 EXIT 0x00000014F5200000 REC 0x00000014FC270000 REC 0x000000147CA70000 PLAY 0x00000014FA250000 PLAY 0x000000147AA50000 STOP 0x00000014FD280000 STOP 0x000000147DA80000 REW 0x00000014F9240000 REW 0x0000001479A40000 FWD 0x00000014FB260000 FWD 0x000000147BA60000 PREV 0x00000014002B0000 PREV 0x0000001480AB0000 PAUSE 0x00000014FE290000 PAUSE 0x000000147EA90000 NEXT 0x00000014FF2A0000 NEXT 0x000000147FAA0000 MUSIC 0x00000014DB060000 MUSIC 0x000000145B860000 PHOTOS 0x00000014DA050000 PHOTOS 0x000000145A850000 DVD 0x00000014D9040000 DVD 0x0000001459840000 TV 0x00000014D8030000 TV 0x0000001458830000 VIDEO 0x00000014DC070000 VIDEO 0x000000145C870000 HELP 0x00000014D6010000 HELP 0x0000001456810000 MOUSE 0x00000014022D0000 MOUSE 0x0000001482AD0000 A 0x00000014EE190000 A 0x000000146E990000 B 0x00000014F01B0000 B 0x00000014709B0000 C 0x00000014F6210000 C 0x0000001476A10000 D 0x00000014F8230000 D 0x0000001478A30000 end codes end remote debian/extras/more_remotes/generic/0000775000000000000000000000000012311315253014606 5ustar debian/extras/more_remotes/generic/devinput.conf0000664000000000000000000002565312311234255017330 0ustar begin remote name linux-input-layer bits 32 begin codes ESC 0x10001 1 0x10002 2 0x10003 3 0x10004 4 0x10005 5 0x10006 6 0x10007 7 0x10008 8 0x10009 9 0x1000a 0 0x1000b MINUS 0x1000c EQUAL 0x1000d BACKSPACE 0x1000e TAB 0x1000f Q 0x10010 W 0x10011 E 0x10012 R 0x10013 T 0x10014 Y 0x10015 U 0x10016 I 0x10017 O 0x10018 P 0x10019 LEFTBRACE 0x1001a RIGHTBRACE 0x1001b ENTER 0x1001c LEFTCTRL 0x1001d A 0x1001e S 0x1001f D 0x10020 F 0x10021 G 0x10022 H 0x10023 J 0x10024 K 0x10025 L 0x10026 SEMICOLON 0x10027 APOSTROPHE 0x10028 GRAVE 0x10029 LEFTSHIFT 0x1002a BACKSLASH 0x1002b Z 0x1002c X 0x1002d C 0x1002e V 0x1002f B 0x10030 N 0x10031 M 0x10032 COMMA 0x10033 DOT 0x10034 SLASH 0x10035 RIGHTSHIFT 0x10036 KPASTERISK 0x10037 LEFTALT 0x10038 SPACE 0x10039 CAPSLOCK 0x1003a F1 0x1003b F2 0x1003c F3 0x1003d F4 0x1003e F5 0x1003f F6 0x10040 F7 0x10041 F8 0x10042 F9 0x10043 F10 0x10044 NUMLOCK 0x10045 SCROLLLOCK 0x10046 KP7 0x10047 KP8 0x10048 KP9 0x10049 KPMINUS 0x1004a KP4 0x1004b KP5 0x1004c KP6 0x1004d KPPLUS 0x1004e KP1 0x1004f KP2 0x10050 KP3 0x10051 KP0 0x10052 KPDOT 0x10053 103RD 0x10054 F13 0x10055 102ND 0x10056 F11 0x10057 F12 0x10058 F14 0x10059 F15 0x1005a F16 0x1005b F17 0x1005c F18 0x1005d F19 0x1005e F20 0x1005f KPENTER 0x10060 RIGHTCTRL 0x10061 KPSLASH 0x10062 SYSRQ 0x10063 RIGHTALT 0x10064 LINEFEED 0x10065 HOME 0x10066 UP 0x10067 PAGEUP 0x10068 LEFT 0x10069 RIGHT 0x1006a END 0x1006b DOWN 0x1006c PAGEDOWN 0x1006d INSERT 0x1006e DELETE 0x1006f MACRO 0x10070 MUTE 0x10071 VOLUMEDOWN 0x10072 VOLUMEUP 0x10073 POWER 0x10074 KPEQUAL 0x10075 KPPLUSMINUS 0x10076 PAUSE 0x10077 F21 0x10078 F22 0x10079 F23 0x1007a F24 0x1007b KPCOMMA 0x1007c LEFTMETA 0x1007d RIGHTMETA 0x1007e COMPOSE 0x1007f STOP 0x10080 AGAIN 0x10081 PROPS 0x10082 UNDO 0x10083 FRONT 0x10084 COPY 0x10085 OPEN 0x10086 PASTE 0x10087 FIND 0x10088 CUT 0x10089 HELP 0x1008a MENU 0x1008b CALC 0x1008c SETUP 0x1008d SLEEP 0x1008e WAKEUP 0x1008f FILE 0x10090 SENDFILE 0x10091 DELETEFILE 0x10092 XFER 0x10093 PROG1 0x10094 PROG2 0x10095 WWW 0x10096 MSDOS 0x10097 COFFEE 0x10098 DIRECTION 0x10099 CYCLEWINDOWS 0x1009a MAIL 0x1009b BOOKMARKS 0x1009c COMPUTER 0x1009d BACK 0x1009e FORWARD 0x1009f CLOSECD 0x100a0 EJECTCD 0x100a1 EJECTCLOSECD 0x100a2 NEXTSONG 0x100a3 PLAYPAUSE 0x100a4 PREVIOUSSONG 0x100a5 STOPCD 0x100a6 RECORD 0x100a7 REWIND 0x100a8 PHONE 0x100a9 ISO 0x100aa CONFIG 0x100ab HOMEPAGE 0x100ac REFRESH 0x100ad EXIT 0x100ae MOVE 0x100af EDIT 0x100b0 SCROLLUP 0x100b1 SCROLLDOWN 0x100b2 KPLEFTPAREN 0x100b3 KPRIGHTPAREN 0x100b4 INTL1 0x100b5 INTL2 0x100b6 INTL3 0x100b7 INTL4 0x100b8 INTL5 0x100b9 INTL6 0x100ba INTL7 0x100bb INTL8 0x100bc INTL9 0x100bd LANG1 0x100be LANG2 0x100bf LANG3 0x100c0 LANG4 0x100c1 LANG5 0x100c2 LANG6 0x100c3 LANG7 0x100c4 LANG8 0x100c5 LANG9 0x100c6 PLAYCD 0x100c8 PAUSECD 0x100c9 PROG3 0x100ca PROG4 0x100cb SUSPEND 0x100cd CLOSE 0x100ce PLAY 0x100cf FASTFORWARD 0x100d0 BASSBOOST 0x100d1 PRINT 0x100d2 HP 0x100d3 CAMERA 0x100d4 SOUND 0x100d5 QUESTION 0x100d6 EMAIL 0x100d7 CHAT 0x100d8 SEARCH 0x100d9 CONNECT 0x100da FINANCE 0x100db SPORT 0x100dc SHOP 0x100dd ALTERASE 0x100de CANCEL 0x100df BRIGHTNESSDOWN 0x100e0 BRIGHTNESSUP 0x100e1 MEDIA 0x100e2 UNKNOWN 0x100f0 BTN_MISC 0x10100 BTN_0 0x10100 BTN_1 0x10101 BTN_2 0x10102 BTN_3 0x10103 BTN_4 0x10104 BTN_5 0x10105 BTN_6 0x10106 BTN_7 0x10107 BTN_8 0x10108 BTN_9 0x10109 BTN_MOUSE 0x10110 BTN_LEFT 0x10110 BTN_RIGHT 0x10111 BTN_MIDDLE 0x10112 BTN_SIDE 0x10113 BTN_EXTRA 0x10114 BTN_FORWARD 0x10115 BTN_BACK 0x10116 BTN_TASK 0x10117 BTN_JOYSTICK 0x10120 BTN_TRIGGER 0x10120 BTN_THUMB 0x10121 BTN_THUMB2 0x10122 BTN_TOP 0x10123 BTN_TOP2 0x10124 BTN_PINKIE 0x10125 BTN_BASE 0x10126 BTN_BASE2 0x10127 BTN_BASE3 0x10128 BTN_BASE4 0x10129 BTN_BASE5 0x1012a BTN_BASE6 0x1012b BTN_DEAD 0x1012f BTN_GAMEPAD 0x10130 BTN_A 0x10130 BTN_B 0x10131 BTN_C 0x10132 BTN_X 0x10133 BTN_Y 0x10134 BTN_Z 0x10135 BTN_TL 0x10136 BTN_TR 0x10137 BTN_TL2 0x10138 BTN_TR2 0x10139 BTN_SELECT 0x1013a BTN_START 0x1013b BTN_MODE 0x1013c BTN_THUMBL 0x1013d BTN_THUMBR 0x1013e BTN_DIGI 0x10140 BTN_TOOL_PEN 0x10140 BTN_TOOL_RUBBER 0x10141 BTN_TOOL_BRUSH 0x10142 BTN_TOOL_PENCIL 0x10143 BTN_TOOL_AIRBRUSH 0x10144 BTN_TOOL_FINGER 0x10145 BTN_TOOL_MOUSE 0x10146 BTN_TOOL_LENS 0x10147 BTN_TOUCH 0x1014a BTN_STYLUS 0x1014b BTN_STYLUS2 0x1014c BTN_WHEEL 0x10150 BTN_GEAR_DOWN 0x10150 BTN_GEAR_UP 0x10151 OK 0x10160 SELECT 0x10161 GOTO 0x10162 CLEAR 0x10163 POWER2 0x10164 OPTION 0x10165 INFO 0x10166 TIME 0x10167 VENDOR 0x10168 ARCHIVE 0x10169 PROGRAM 0x1016a CHANNEL 0x1016b FAVORITES 0x1016c EPG 0x1016d PVR 0x1016e MHP 0x1016f LANGUAGE 0x10170 TITLE 0x10171 SUBTITLE 0x10172 ANGLE 0x10173 ZOOM 0x10174 MODE 0x10175 KEYBOARD 0x10176 SCREEN 0x10177 PC 0x10178 TV 0x10179 TV2 0x1017a VCR 0x1017b VCR2 0x1017c SAT 0x1017d SAT2 0x1017e CD 0x1017f TAPE 0x10180 RADIO 0x10181 TUNER 0x10182 PLAYER 0x10183 TEXT 0x10184 DVD 0x10185 AUX 0x10186 MP3 0x10187 AUDIO 0x10188 VIDEO 0x10189 DIRECTORY 0x1018a LIST 0x1018b MEMO 0x1018c CALENDAR 0x1018d RED 0x1018e GREEN 0x1018f YELLOW 0x10190 BLUE 0x10191 CHANNELUP 0x10192 CHANNELDOWN 0x10193 FIRST 0x10194 LAST 0x10195 AB 0x10196 NEXT 0x10197 RESTART 0x10198 SLOW 0x10199 SHUFFLE 0x1019a BREAK 0x1019b PREVIOUS 0x1019c DIGITS 0x1019d TEEN 0x1019e TWEN 0x1019f DEL_EOL 0x101c0 DEL_EOS 0x101c1 INS_LINE 0x101c2 DEL_LINE 0x101c3 end codes end remote debian/extras/more_remotes/radioshack/0000775000000000000000000000000012311315253015302 5ustar debian/extras/more_remotes/radioshack/radioshack.conf0000664000000000000000000000545112311234255020270 0ustar # this config file was generated # using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004 # # contributed by Jarod Wilson #------------------------------------------------------------------------------ # # filename: RadioShack_15-2116-vcr0081.lirc # encoding: RC-5 # brand: RadioShack Universal (and others) # model: 15-2116, set as VCR type 0081 # supported devices: all # # note: requires quite a bit of key reassignment w/keymover and EFCs... # see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO # #------------------------------------------------------------------------------ begin remote name rs15-2116-vcr0081 bits 11 flags RC5|CONST_LENGTH eps 20 aeps 0 header 0 0 one 889 889 zero 889 889 plead 889 ptrail 0 foot 0 0 repeat 0 0 pre_data_bits 2 pre_data 0x02 post_data_bits 0 post_data 0x0 pre 0 0 post 0 0 gap 113792 toggle_bit 2 frequency 36000 duty_cycle 50 begin codes 0 0x0000000000000140 1 0x0000000000000141 2 0x0000000000000142 3 0x0000000000000143 4 0x0000000000000144 5 0x0000000000000145 6 0x0000000000000146 7 0x0000000000000147 8 0x0000000000000148 9 0x0000000000000149 INFO 0x000000000000014a SELECT 0x000000000000014b POWER 0x000000000000014c MUTE 0x000000000000014d MOVE 0x000000000000014e VOL+ 0x0000000000000150 VOL- 0x0000000000000151 RIGHT 0x000000000000015a LEFT 0x000000000000015b ENTER 0x000000000000015c MENU 0x000000000000015d CH+ 0x0000000000000160 CH- 0x0000000000000161 PIP 0x0000000000000162 SWAP 0x0000000000000163 SLEEP 0x0000000000000166 FREEZE 0x0000000000000168 PAUSE 0x0000000000000169 SKIP 0x000000000000016a EXIT 0x0000000000000171 REW 0x0000000000000172 REPLAY 0x0000000000000173 FFWD 0x0000000000000174 PLAY 0x0000000000000175 STOP 0x0000000000000176 REC 0x0000000000000177 SKIP 0x0000000000000178 +100 0x0000000000000179 LAST 0x000000000000017b GUIDE 0x000000000000017c TV/VIDEO 0x000000000000017e end codes end remote debian/extras/more_remotes/asus/0000775000000000000000000000000012311315253014145 5ustar debian/extras/more_remotes/asus/mycinema.conf0000664000000000000000000000443212311234255016623 0ustar # Please make this file available to others # by sending it to # # this config file was automatically generated # using lirc-0.8.2(dev/input) on Fri Jan 25 12:35:55 2008 # # contributed by Gianfranco Liporace # # brand: ASUS Remote # model no. of remote control: PC-39 # devices being controlled by this remote: # ASUS MyCinema P7131 Hybrid Analog/DVB TV card begin remote name lirc.conf bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0x8001 gap 135991 toggle_bit_mask 0x80010188 begin codes Rec 0x00A7 Close 0x0074 Prev 0x019C Stop 0x0080 Next 0x0197 Rew 0x00A8 Play/Pause 0x0077 Fwd 0x00D0 Up 0x0067 Down 0x006C Enter 0x8001001C Left 0x0069 Right 0x006A Vol+ 0x0073 Vol- 0x0072 Ch+ 0x0192 Ch- 0x0193 Back 0x00AE 1 0x0002 2 0x0003 3 0x0004 4 0x0005 5 0x0006 6 0x0007 7 0x0008 8 0x0009 9 0x000A FullScreen 0x0174 0 0x000B Recall 0x0070 Tv 0x0179 Video 0x0189 Home 0x0066 Dvd 0x0185 Picture 0x016E DvdMenu 0x008B Radio 0x0181 Music 0x0188 Mute 0x0071 end codes end remote debian/extras/transmitter.hwdb0000664000000000000000000000516712311234255013727 0ustar # LIRC - Transmitter Hardware DataBase # # This file lists cable and satellite boxes supported by LIRC # # The format is: # # [remote controls type] # description;driver;lirc driver;HW_DEFAULT;lircd_conf; # [Motorola Cable box] Serial Port (UART) : Motorola Cable box;serial;lirc_dev lirc_serial;hw_default;motorola/dctxxxx.conf Microsoft Windows Media Center V2 (usb) : Motorola Cable box;none;lirc_dev mceusb;hw_default;motorola/dctxxxx.conf Command IR : Motorola Cable box;none;lirc_dev lirc_cmdir;hw_default;motorola/dctxxxx.conf USB-UIRT2 : Motorola Cable box;uirt2_raw;none;hw_uirt2_raw;motorola/dctxxxx.conf [Sky Satellite] Serial Port (UART) : Sky Satellite Receiver;serial;lirc_dev lirc_serial;hw_default;sky/general.conf Microsoft Windows Media Center V2 (usb) : Sky Satellite Receiver;none;lirc_dev mceusb;hw_default;sky/general.conf Command IR : Sky Satellite Receiver;none;lirc_dev lirc_cmdir;hw_default;sky/general.conf USB-UIRT2 : Sky Satellite Receiver;uirt2_raw;none;hw_uirt2_raw;sky/general.conf [Dish Networks] Serial Port (UART) : Dish Receiver;serial;lirc_dev lirc_serial;hw_default;dish/general.conf Microsoft Windows Media Center V2 (usb) : Dish Receiver;none;lirc_dev mceusb;hw_default;dish/general.conf Command IR : Dish Receiver;none;lirc_dev lirc_cmdir;hw_default;dish/general.conf USB-UIRT2 : Dish Receiver;uirt2_raw;none;hw_uirt2_raw;dish/general.conf [Direct TV] Serial Port (UART) : Direct TV Receiver;serial;lirc_dev lirc_serial;hw_default;directtv/general.conf Microsoft Windows Media Center V2 (usb) : Direct TV Receiver;none;lirc_dev mceusb;hw_default;directtv/general.conf Command IR : Direct TV Receiver;none;lirc_dev lirc_cmdir;hw_default;directtv/general.conf USB-UIRT2 : Direct TV Receiver;uirt2_raw;none;hw_uirt2_raw;directtv/general.conf [Pioneer Cable box] Serial Port (UART) : Pioneer Cable box;serial;lirc_dev lirc_serial;hw_default;pioneer/general.conf Microsoft Windows Media Center V2 (usb) : Pioneer Cable box;none;lirc_dev mceusb;hw_default;pioneer/general.conf Command IR : Pioneer Cable box;none;lirc_dev lirc_cmdir;hw_default;pioneer/general.conf USB-UIRT2 : Pioneer Cable box;uirt2_raw;none;hw_uirt2_raw;pioneer/general.conf [Scientific Atlanta Cable box] Serial Port (UART) : Scientific Atlanta Cable box;serial;lirc_dev lirc_serial;hw_default;scientificatlanta/general.conf Microsoft Windows Media Center V2 (usb) : Scientific Atlanta Cable box;none;lirc_dev mceusb;hw_default;scientificatlanta/general.conf Command IR : Scientific Atlanta Cable box;none;lirc_dev lirc_cmdir;hw_default;scientificatlanta/general.conf USB-UIRT2 : Scientific Atlanta Cable box;uirt2_raw;none;hw_uirt2_raw;scientificatlanta/general.conf debian/extras/transmitters/0000775000000000000000000000000012311315253013231 5ustar debian/extras/transmitters/scientificatlanta/0000775000000000000000000000000012311315253016716 5ustar debian/extras/transmitters/scientificatlanta/general.conf0000664000000000000000000000653212311234255021212 0ustar # # this config file was automatically generated # using lirc-0.6.6(sir) on Wed Mar 24 22:28:59 2004 # # Modified by Stephane Lavergne : # Base frequency is 56kHz, irrecord was otherwise right on. # # contributed by # # brand: Scientific Atlanta # model no. of remote control: AT8400 # devices being controlled by this remote: Explorer 8000 # begin remote name SAE8000 bits 22 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 3397 3372 one 827 2557 zero 827 855 ptrail 827 gap 101386 toggle_bit 0 frequency 56000 begin codes power 0x000000000037C107 guide 0x000000000036C127 menu 0x000000000036F920 info 0x000000000036213B select_up 0x000000000036812F select_down 0x000000000037A10B select 0x0000000000366133 select_left 0x000000000037810F select_right 0x0000000000364137 select_page+ 0x000000000036D924 select_page- 0x000000000037D904 exit 0x0000000000366932 settings 0x0000000000373918 A 0x000000000037E902 B 0x000000000036193C C 0x000000000037191C vol+ 0x000000000036093E vol- 0x000000000037091E ch+ 0x0000000000377111 ch- 0x000000000036F121 mute 0x000000000036892E fav 0x000000000037F101 last 0x000000000036E123 rew8secs 0x000000000037C906 list 0x000000000036C926 live 0x000000000036B129 rew 0x000000000037291A ff 0x000000000036293A play 0x000000000037990C stop 0x0000000000365934 pause 0x0000000000374117 rec 0x0000000000375914 1 0x000000000036113D 2 0x000000000037111D 3 0x000000000036912D 4 0x000000000037910D 5 0x0000000000365135 6 0x0000000000375115 7 0x000000000036D125 8 0x000000000037D105 9 0x0000000000363139 asterisk 0x000000000037E103 0 0x0000000000373119 pound 0x000000000036B928 pip_power 0x000000000037B908 pip_swap 0x0000000000367930 pip_move 0x0000000000377910 pip_ch+ 0x000000000036E922 pip_ch- 0x000000000037F900 video_source 0x0000000000376113 end codes end remote debian/extras/transmitters/sky/0000775000000000000000000000000012311315253014037 5ustar debian/extras/transmitters/sky/general.conf0000664000000000000000000000430012311234255016322 0ustar # # this config file was automatically generated # using lirc-0.8.0(userspace) on Fri Jul 28 02:45:39 2006 # # contributed by Lloyd Williams # # brand: SKY # model no. of remote control: URC 1650-00 B00 - 9RC16P-1014 Sky+ Rev 6 # devices being controlled by this remote: SKY+ DVB-S receiver & PVR # begin remote name sky bits 8 flags RC6|CONST_LENGTH eps 30 aeps 100 header 2691 890 one 427 460 zero 427 460 pre_data_bits 17 pre_data 0x3FF3 gap 149845 min_repeat 2 toggle_bit 0 rc6_mask 0x100000 begin codes POWER 0xF3 TV_GUIDE 0x33 BOX_OFFICE 0x82 SERVICES 0x81 INTERACTIVE 0x0A INFO 0x34 UP 0xA7 LEFT 0xA5 RIGHT 0xA4 DOWN 0xA6 SELECT 0xA3 CH+ 0xDF CH- 0xDE TEXT 0xC3 BACK_UP 0x7C HELP 0x7E FREV 0xC2 FFWD 0xD7 PLAY 0xC1 PAUSE 0xDB RECORD 0xBF STOP 0xC0 RED 0x92 GREEN 0x91 YELLOW 0x90 BLUE 0x8F 1 0xFE 2 0xFD 3 0xFC 4 0xFB 5 0xFA 6 0xF9 7 0xF8 8 0xF7 9 0xF6 0 0xFF SKY 0x7F TV 0x7B end codes end remote debian/extras/transmitters/motorola/0000775000000000000000000000000012311315253015065 5ustar debian/extras/transmitters/motorola/dctxxxx.conf0000664000000000000000000000547612311234255017464 0ustar # # this config file was automatically generated # using lirc-0.6.6(serial) on Fri Mar 28 22:46:44 2003 # # contributed by shane bradley # # # # brand: Motorola # model no. of remote control: DCT2000 # devices being controlled by this remote: # begin remote name DCT2000 bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9036 4424 one 556 2185 zero 556 4424 ptrail 556 gap 100025 toggle_bit 0 begin codes HELP 0x000000000000B3F2 POWER 0x000000000000AFF9 MUTE 0x0000000000000FF7 PAGE+ 0x000000000000A3F3 PAGE- 0x00000000000023FB LOCK 0x00000000000097F6 EXIT 0x000000000000B7F4 AUP 0x000000000000D3F6 ADOWN 0x00000000000053FE ALEFT 0x00000000000093F1 ARIGHT 0x00000000000013F9 OK 0x00000000000077F8 GUIDE 0x000000000000F3F4 MENU 0x00000000000067F9 VOL+ 0x0000000000004FF3 VOL- 0x0000000000008FFB LAST 0x00000000000037FC FAV 0x00000000000057FA CH+ 0x0000000000002FF5 CH- 0x000000000000CFFD A 0x00000000000017FE B 0x0000000000001BF1 C 0x000000000000EBF9 1 0x0000000000007FF0 2 0x000000000000BFF8 3 0x0000000000003FF4 4 0x000000000000DFFC 5 0x0000000000005FF2 6 0x0000000000009FFA 7 0x0000000000001FF6 8 0x000000000000EFFE 9 0x0000000000006FF1 0 0x000000000000FFFF BYPASS 0x000000000000D7F2 MUSIC 0x000000000000F7F0 STOP 0x00000000000063FD PAUSE 0x00000000000007FF PLAY 0x000000000000E3F5 REW 0x00000000000087F7 REC 0x00000000000073FC FFWD 0x00000000000047FB end codes end remote debian/extras/transmitters/pioneer/0000775000000000000000000000000012311315253014672 5ustar debian/extras/transmitters/pioneer/general.conf0000664000000000000000000000660312311234255017165 0ustar # # this config file was automatically generated # using lirc-0.6.6(act200l) on Wed Apr 7 18:14:45 2004 # # contributed by william nolan (will|willnolan.com) # # number codes denoised and rationalized by joe pierce (joe|joepierce.org) # # brand: Time Warner Digital Cable # model no. of remote control: UR4-P360 (http://www.twalbany.com/digitalentertainment/ur4-p360.php) # devices being controlled by this remote: Pioneer Voyager digital cable # set top box # notes: I'm not sure if this remote is used by all TW digital cable boxes, # but this one works with the ones used by TW in the New York area. # I was able to capture the commands with an Actisys IR-200L but not able # to transmit with it. I built the simple circuit in the LIRC documentation # and have been successfully using it to control the set top box ever since. begin remote name TWC_UR4-P360 bits 22 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 3337 3378 one 820 2540 zero 820 817 ptrail 820 gap 100786 toggle_bit 0 frequency 56000 begin codes POWER 0x37C107 GUIDE 0x36C127 MENU 0x36F920 INFO 0x36213B UP 0x36812F DOWN 0x37A10B LEFT 0x37810F RIGHT 0x364137 SELECT 0x366133 PAGEUP 0x36D924 PAGEDOWN 0x37D904 HELP 0x376912 SETTINGS 0x373918 EXIT 0x366932 A 0x37E902 B 0x36193C C 0x37191C LAST 0x36E123 FAV 0x37F101 DAYMINUS 0x0E163D DAYPLUS 0x0FE603 CHUP 0x377111 CHDOWN 0x36F121 1 0x36113D 2 0x37111D 3 0x36912D 4 0x37910D 5 0x365135 6 0x375115 7 0x36D125 8 0x37D105 9 0x363139 0 0x373119 ENTER 0x363139 REW 0x37291A PLAY 0x37990C FF 0x36293A REC 0x375914 STOP 0x365934 PAUSE 0x374117 end codes end remote begin remote name TWC_UR4-P360-SONY bits 11 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 2370 598 one 1179 598 zero 582 598 ptrail 582 gap 45000 min_repeat 2 toggle_bit 0 begin codes VOLUP 0x248 VOLDOWN 0x648 MUTE 0x148 end codes end remote debian/extras/transmitters/dish/0000775000000000000000000000000012311315253014160 5ustar debian/extras/transmitters/dish/general.conf0000664000000000000000000010671112311234255016454 0ustar # This config file is based on the information posted by Endaf Jones at # http://www.gossamer-threads.com/lists/mythtv/users/196566#196566 # # brand: JVC/RCA # model no. of remote control: # supported devices: Dish Network (Echostar) # - JVC 2700 receiver # - JVC 4700 receiver # - JVC 49xx receiver # - JVC 50xx receiver # - RCA 31x receiver # and several other Dish receivers using the # "blue button" remotes # # Unit code selection (1-16) is performed by specifying the appropriate # value for post_data # 1=0x000 2=0x200 3=0x100 4=0x300 # 5=0x080 6=0x280 7=0x180 8=0x380 # 9=0x040 10=0x240 11=0x140 12=0x340 # 13=0x0C0 14=0x2C0 15=0x1C0 16=0x3C0 # # Each has been implemented in this config file with the remote names "dish#" # where the hash/pound/number sign ("#") is a code number from 1 through 16. # There is also a remote called "dish" (without a number), for users with only # one receiver, that uses remote code 1 (DISH's default). # # The duty_cycle (the percentage of time during a pulse that infrared light is # being sent) is commented because some hardware transmitters don't support its # use. # # The discrete power functions (power_on and power_off) can be used to ensure # the power state of the receiver. However, they probably shouldn't be used in # a channel change script as the receiver will require a significant delay # after a power_on before it is capable of receiving/responding to additional # commands (such as channel numbers). Instead, assuming most of your recording # is during prime-time, you may want to set a cron job to run a "power_on" # command for each of your receivers about 5 or 10 minutes before primtetime. ### Remote definition for remotes using remote code 1 (0x000) begin remote name dish flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x000 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 end codes end remote ### Remote definition for remotes using remote code 1 (0x000) ### (Duplicated to allow a "dish" and a "dish1" remote name) begin remote name dish1 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x000 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 2 (0x200) begin remote name dish2 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x200 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 3 (0x100) begin remote name dish3 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x100 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 4 (0x300) begin remote name dish4 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x300 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 5 (0x080) begin remote name dish5 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x080 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 6 (0x280) begin remote name dish6 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x280 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 7 (0x180) begin remote name dish7 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x180 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 8 (0x380) begin remote name dish8 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x380 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 9 (0x040) begin remote name dish9 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x040 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 10 (0x240) begin remote name dish10 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x240 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 11 (0x140) begin remote name dish11 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x140 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 12 (0x340) begin remote name dish12 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x340 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 13 (0x0C0) begin remote name dish13 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x0C0 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 14 (0x2C0) begin remote name dish14 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x2C0 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 15 (0x1C0) begin remote name dish15 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x1C0 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote ### Remote definition for remotes using remote code 16 (0x3C0) begin remote name dish16 flags SPACE_ENC|NO_HEAD_REP eps 30 aeps 100 frequency 56000 # duty_cycle 32 one 440 1645 zero 440 2780 header 525 6045 ptrail 450 gap 6115 min_repeat 6 bits 6 post_data_bits 10 post_data 0x3C0 begin codes info 0 power_on 1 power 2 1 4 2 5 3 6 4 8 5 9 6 10 7 12 8 13 9 14 0 17 menu 11 select 16 cancel 18 guide 20 view 22 tv_vcr 23 right 24 up 26 recall 27 left 28 down 30 record 31 pause 32 stop 33 sys_info 36 asterisk 37 pound 38 power_off 39 sat 41 dish_home 52 sys_info2 54 dish_home2 56 dvr 57 skip_fwd 55 skip_back 54 fwd 50 play 3 back 49 dish 52 page_up 15 page_down 7 end codes end remote debian/extras/transmitters/directtv/0000775000000000000000000000000012311315253015055 5ustar debian/extras/transmitters/directtv/general.conf0000664000000000000000000001355112311234255017350 0ustar # # this config file was automatically generated # using lirc-0.8.1-CVS-pvr150(default) on Thu Nov 23 11:12:04 2006 # # contributed by Chris Jacobs # # brand: DirecTV HD20-100 # model no. of remote control: HD20-100 # devices being controlled by this remote: DirecTV HD20-100 # begin remote name directtv flags RAW_CODES eps 30 aeps 100 ptrail 613 repeat 0 0 gap 29767 begin raw_codes name 1 6000 1150 1250 1100 650 550 650 550 650 550 650 500 650 1150 650 550 650 1150 600 name 2 6000 1100 1250 1150 650 550 650 550 600 550 650 550 1250 550 650 550 1200 550 650 name 3 6000 1150 1250 1100 650 550 650 550 650 550 650 550 1200 1150 650 550 1250 1150 600 name 4 6000 1150 1250 1150 650 500 650 550 650 550 650 1150 650 500 650 550 1250 1150 650 name 5 6000 1150 1250 1100 650 550 650 550 650 500 650 1150 650 1150 650 1150 600 550 650 name 6 6000 1150 1250 1150 650 500 650 550 650 550 650 1150 1200 550 650 1150 650 1150 600 name 7 6000 1100 1250 1150 650 550 650 500 650 550 650 1150 1250 1100 650 1150 1250 550 650 name 8 6000 1150 1250 1100 650 550 650 550 650 550 1200 550 650 550 650 1150 1200 550 650 name 9 6000 1100 1300 1100 650 550 650 550 650 500 1250 550 650 1150 650 1150 1200 1150 650 name 0 6000 1150 1250 1150 650 500 650 550 650 1150 650 550 650 1100 650 1150 1250 550 650 name dash 6000 1100 1300 1100 650 550 650 550 650 1100 650 550 1250 550 650 1100 1250 1150 650 name last 6000 1100 1300 1100 650 550 650 550 650 500 1250 1150 1250 1150 1200 1150 650 550 650 name guide 6000 1100 1300 1100 650 550 650 550 1250 500 1250 550 650 550 650 550 600 550 650 name up 6000 1100 1300 1100 650 550 650 550 1250 500 650 550 650 1150 1250 500 1250 1150 650 name down 6000 1150 1250 1100 650 550 650 550 1250 500 650 550 1250 550 1250 1150 600 550 650 name left 6000 1150 1250 1150 650 500 700 500 1250 550 650 550 1250 1100 1250 1150 650 1150 600 name right 6000 1150 1250 1100 650 550 650 550 1250 500 650 1150 650 550 1250 1100 650 1150 650 name select 6000 1150 1250 1100 700 500 650 550 1250 550 650 1100 650 1150 1250 1150 1200 550 650 name action 6000 1150 1250 1150 650 500 650 550 1250 550 1250 550 600 1150 650 550 650 1150 650 name list 6050 1100 1250 1150 650 500 650 550 1250 550 1250 550 1200 550 650 550 1250 550 650 name info 6000 1100 1250 1150 650 550 650 500 1250 550 1250 1150 1250 500 650 1150 650 1150 650 name back 6000 1150 1250 1150 650 500 700 500 1250 550 650 1150 1200 1150 650 550 650 550 650 name power 6000 1150 1250 1100 650 550 1250 550 650 550 650 500 650 550 1250 1150 1250 500 650 name exit 6000 1150 1250 1150 650 500 650 550 1250 550 650 1150 1200 550 1250 1150 1250 1100 650 name ch- 6000 1100 1250 1150 650 550 650 500 650 550 1250 1150 1250 550 1200 550 1250 1150 650 name ch+ 6000 1100 1300 1100 650 550 650 500 700 500 1250 1150 650 1150 1200 550 1250 550 650 end raw_codes end remote debian/extras/more_remotes.hwdb0000664000000000000000000000255312311234255014047 0ustar # LIRC - Supplemental Remote Control DataBase # # This file contains just extra remote controls not in the core LIRC package # # The format is: # # [remote controls type] # description;driver;lirc driver;HW_DEFAULT;lircd_conf; # [Serial Port Devices] Radio Shack 15-2116;serial;lirc_dev lirc_serial;hw_default;radioshack/radioshack.conf; [TV card] Asus MyCinema P7131;devinpu;none;hw_default;asus/mycinema.conf; AverMedia TV card (TVCapture98, TVPhone98) (card=13/41);avermedia98;devinput;hw_default;generic/devinput.conf; Encore ELTV-FM;encore;lirc_dev lirc_i2c;hw_default;encore/enltv.conf; Freecom DVB-T USB Stick;devinput;none;hw_default;freecom/lircd.conf.freeconf Hauppauge Nova-T 500;devinput;none;hw_devinput;hauppauge/lircd.conf.hauppauge_novat500; Hauppauge HVR-1100;hauppauge;devinput;hw_devinput;hauppauge/lircd.conf.hauppauge; MSI TV@nywhere Master;devinput;none;hw_default;msi/lircd.conf.tvanywhere; Nebula Digitv;leadtek;devinput;hw_default;nebula/digitv.conf; [IrDA/CIR hardware] [PDAs] [USB devices] Medion MD1 NBC;atilibusb;none;hw_atilibusb;medion/md1-nbc.conf; Soundgraph iMON Antec Veris;imon_lcd;lirc_dev lirc_imon;hw_default;imon/lircd.conf.imon-antec-veris; Streamzap PC Remote;streamzap;lirc_dev streamzap;hw_default;streamzap/lircd.conf.streamzap; Windows Media Center Transceivers/Remotes (all);mceusb;lirc_dev mceusb;hw_default;mceusb/lircd.conf.mceusb; debian/patches/0000775000000000000000000000000012311315253010613 5ustar debian/patches/02_Makefile.in0000664000000000000000000000333712311234255013171 0ustar prevent autotools from getting run on every build. (C) 2006 Hector Garcia (C) 2008 Stefan Lippers-Hollmann , rediffed Index: lirc/Makefile.in =================================================================== --- lirc.orig/Makefile.in 2011-03-25 17:28:54.000000000 -0500 +++ lirc/Makefile.in 2011-05-05 14:28:58.519649463 -0500 @@ -103,12 +103,8 @@ GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ @@ -265,18 +261,6 @@ am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -292,9 +276,7 @@ $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @@ -307,7 +289,6 @@ @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ debian/patches/series0000664000000000000000000000001712311234255012030 0ustar 02_Makefile.in debian/lirc.install0000664000000000000000000000046412311234255011513 0ustar etc/lirc/{hardware.conf,lircd.conf,lircmd.conf} etc/logcheck/* usr/bin/{ircat,irexec,irman2lirc,irpty,irrecord,irsend,irw,lircrcd,mode2} usr/sbin/* usr/share/man/man8/* usr/share/man/man1/{ircat.1,irexec.1,irpty.1,irrecord.1,irsend.1,irw.1,lircrcd.1,mode2.1} usr/share/hal/fdi/preprobe/20thirdparty/lirc.fdi debian/conf.placeholder0000664000000000000000000000017112311234255012316 0ustar #UNCONFIGURED # # To find out how to get a proper configuration file please read: # # /usr/share/doc/lirc/README.Debian debian/lirc-svga.links0000664000000000000000000000005312311234255012115 0ustar usr/share/doc/lirc usr/share/doc/lirc-svga debian/watch0000664000000000000000000000012012311234255010210 0ustar version=3 http://lirc.org/ \ http://sf.net/lirc/lirc-([\.0-9a-zA-Z]+)\.tar\.gz debian/irman2lirc.10000664000000000000000000000076112311234255011316 0ustar .TH irman2lirc "1" "November 2001" "irman2lirc" FSF .SH NAME irman2lirc - converts irman.conf to lirc config file .SH SYNOPSIS .B irman2lirc [\fIfile\fR] .SH DESCRIPTION If you already have a propper configuration file (irman.conf) for the libirman package, irman2lirc will convert it to lirc syntax with irman2lirc. .TP \fB\-\-help\fR display usage summary .SH "SEE ALSO" The documentation for .B lirc is maintained as a html pages. They are located under html/ in the documentadion directory. debian/shlibs.local0000664000000000000000000000005312311234255011464 0ustar liblirc_client 0 liblircclient0 (>= 0.6.4) debian/copyright0000664000000000000000000000262512311234255011126 0ustar This is the Debian packaging of LIRC, Linux Infra-red Remote Control support. It was downloaded from http://download.sourceforge.net/LIRC/ Summary of copyright messages found in sources: Copyright © 1998 Pablo d'Angelo Copyright © 1998,1999 Christoph Bartelmus Copyright © 1996,97 Ralph Metzler (rjkm@thp.uni-koeln.de) Copyright © 1998 Trent Piepho Copyright © 1998 Ben Pfaff Copyright © 1998.11.18 Sinkovics Zoltan The whole thing is licensed under the GPL v2 or later. This package is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This package is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this package; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA On Debian systems, the complete text of the GNU General Public License can be found in `/usr/share/common-licenses/GPL-2'. debian/lirc.init.d0000775000000000000000000001750712311306232011236 0ustar #! /bin/sh ### BEGIN INIT INFO # Provides: lirc # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts LIRC daemon. # Description: LIRC is used to control different # infrared receivers and transceivers. ### END INIT INFO load_modules () { MODULES_MISSING=false log_daemon_msg "Loading LIRC modules" for mod in $*; do if [ $mod = "udev" ]; then log_end_msg 0 log_success_msg "Restarted via udev, don't reload modules" break else modprobe $mod 2> /dev/null || MODULES_MISSING=true fi done log_end_msg $? if $MODULES_MISSING; then log_failure_msg "Unable to load LIRC kernel modules. Verify your" log_failure_msg "selected kernel modules in /etc/lirc/hardware.conf" START_LIRCMD=false START_LIRCD=false fi } build_remote_args () { REMOTE_ARGS="$*" #For remote only detection support, we need #both REMOTE_DEVICE and TRANSMITTER_DEVICE undefined if [ -z "$REMOTE_DEVICE" ] && [ -z "$TRANSMITTER_DEVICE" ] && [ -c $dev ]; then REMOTE_DEVICE="$dev" fi #If we have a REMOTE_DEVICE or REMOTE_DRIVER defined (either because no devices #were defined, OR if we explicitly did), then populate REMOTE_ARGS if [ -n "$REMOTE_DEVICE" ] || [ -n "$REMOTE_DRIVER" ]; then if [ -n "$REMOTE_DEVICE" ] && [ "$REMOTE_DEVICE" != "none" ]; then REMOTE_ARGS="--device=$REMOTE_DEVICE $REMOTE_ARGS" fi if [ -n "$REMOTE_DRIVER" ] && [ "$REMOTE_DRIVER" != "none" ]; then REMOTE_ARGS="--driver=$REMOTE_DRIVER $REMOTE_ARGS" fi #Now, if we ALSO have a transmitter defined, add some args #To make the first lircd listen up if [ -n "$TRANSMITTER_DEVICE" ] || [ -n "$TRANSMITTER_DRIVER" ]; then REMOTE_ARGS="$REMOTE_ARGS --connect=localhost:8765" fi REMOTE_ARGS="--output=$REMOTE_SOCKET $REMOTE_ARGS" fi REMOTE_PID="--pidfile=/run/lirc/lircd.pid" echo $REMOTE_ARGS } build_transmitter_args () { TRANSMITTER_ARGS="$*" #Transmitters must be explicitly be defined if [ -n "$TRANSMITTER_DEVICE" ] || [ -n "$TRANSMITTER_DRIVER" ]; then if [ -n "$TRANSMITTER_DEVICE" ] && [ "$TRANSMITTER_DEVICE" != "none" ]; then TRANSMITTER_ARGS="--device=$TRANSMITTER_DEVICE $TRANSMITTER_ARGS" fi if [ -n "$TRANSMITTER_DRIVER" ] && [ "$TRANSMITTER_DRIVER" != "none" ]; then TRANSMITTER_ARGS="--driver=$TRANSMITTER_DRIVER $TRANSMITTER_ARGS" fi #Now, if we ALSO have a remote defined, add some args #To make the second lircd connect if [ -n "$REMOTE_DEVICE" ] || [ -n "$REMOTE_DRIVER" ]; then TRANSMITTER_ARGS="$TRANSMITTER_ARGS --listen --pidfile=/run/lirc/lircd1.pid" TRANSMITTER_PID="--pidfile=/run/lirc/lircd1.pid" else TRANSMITTER_PID="--pidfile=/run/lirc/lircd.pid" fi TRANSMITTER_ARGS="--output=$TRANSMITTER_SOCKET $TRANSMITTER_ARGS" fi echo $TRANSMITTER_ARGS } in_kernel_support() { if [ -d /sys/class/rc ] && [ "$DISABLE_KERNEL_SUPPORT" = "true" ]; then for file in `find /sys/class/rc/*/ -name protocols`; do if [ "$1" = "disable" ]; then echo "lirc" > $file else echo "none" > $file for protocol in `cat $file`; do echo "+${protocol}" > $file done fi done fi } . /lib/lsb/init-functions test -f /usr/sbin/lircd || exit 0 test -f /usr/sbin/lircmd || exit 0 START_LIRCMD=true START_LIRCD=true START_IREXEC=true DISABLE_KERNEL_SUPPORT=true if [ -f /etc/lirc/hardware.conf ];then . /etc/lirc/hardware.conf fi if [ ! -f /etc/lirc/lircd.conf ] || grep -q "^#UNCONFIGURED" /etc/lirc/lircd.conf; then if [ "$1" = "start" ]; then log_success_msg "No valid /etc/lirc/lircd.conf has been found." log_success_msg "Remote control support has been disabled." log_success_msg "Reconfigure LIRC or manually replace /etc/lirc/lircd.conf to enable." fi START_LIRCD=false START_LIRCMD=false START_IREXEC=false fi if [ ! -f /etc/lirc/lircmd.conf ] || grep -q "^#UNCONFIGURED" /etc/lirc/lircmd.conf; then START_LIRCMD=false fi if [ ! -f /etc/lirc/lircrc ] || grep -q "^#UNCONFIGURED" /etc/lirc/lircrc; then START_IREXEC=false fi #We need default socket locations OLD_SOCKET="/dev/lircd" if [ -z "$REMOTE_SOCKET" ]; then REMOTE_SOCKET="/run/lirc/lircd" fi if [ -z "$TRANSMITTER_SOCKET" ]; then TRANSMITTER_SOCKET="/run/lirc/lircd" #Now, if we ALSO have a remote defined, #change the default transmitter socket if [ -n "$REMOTE_DEVICE" ] || [ -n "$REMOTE_DRIVER" ]; then TRANSMITTER_SOCKET="${TRANSMITTER_SOCKET}1" fi fi case "$1" in start) if [ "$LOAD_MODULES" = "true" ] && [ "$START_LIRCD" = "true" ]; then load_modules $2 $REMOTE_MODULES $TRANSMITTER_MODULES $MODULES in_kernel_support "disable" fi if [ "$START_LIRCD" = "true" ]; then mkdir -p "/run/lirc" log_daemon_msg "Starting remote control daemon(s) : " REMOTE_LIRCD_ARGS=`build_remote_args $REMOTE_LIRCD_ARGS` TRANSMITTER_LIRCD_ARGS=`build_transmitter_args $TRANSMITTER_LIRCD_ARGS` RES=1 #if we have a transmitter defined, start it first if [ -n "$TRANSMITTER_LIRCD_ARGS" ]; then log_progress_msg "LIRC (transmitter)" start-stop-daemon --start --quiet --oknodo --exec /usr/sbin/lircd --pidfile=$TRANSMITTER_PID -- $TRANSMITTER_LIRCD_ARGS < /dev/null RES=$? fi if [ -n "$REMOTE_LIRCD_ARGS" ]; then log_progress_msg "LIRC (remote)" start-stop-daemon --start --quiet --oknodo --exec /usr/sbin/lircd --pidfile=$REMOTE_PID -- $REMOTE_LIRCD_ARGS < /dev/null RES=$? fi log_end_msg $RES #Set up symlinks, starting with the remote if present. if [ -n "$REMOTE_LIRCD_ARGS" ]; then if [ -S "$REMOTE_SOCKET" -a "$OLD_SOCKET" != "$REMOTE_SOCKET" ]; then rm -f $OLD_SOCKET && ln -s $REMOTE_SOCKET $OLD_SOCKET fi if [ -n "$TRANSMITTER_LIRCD_ARGS" ]; then if [ -S "$TRANSMITTER_SOCKET" ]; then rm -f ${OLD_SOCKET}1 && ln -s $TRANSMITTER_SOCKET ${OLD_SOCKET}1 fi fi elif [ -n "$TRANSMITTER_LIRCD_ARGS" ]; then if [ -S "$TRANSMITTER_SOCKET" -a "$OLD_SOCKET" != "$TRANSMITTER_SOCKET" ]; then rm -f $OLD_SOCKET && ln -s $TRANSMITTER_SOCKET $OLD_SOCKET fi fi fi if [ "$START_LIRCMD" = "true" ]; then mkdir -p "/run/lirc" log_daemon_msg "Starting remote control mouse daemon : LIRCMD " start-stop-daemon --start --quiet --oknodo --exec /usr/sbin/lircmd < /dev/null log_end_msg $? fi if [ "$START_IREXEC" = "true" ]; then mkdir -p "/run/lirc" log_daemon_msg "Starting execution daemon: irexec" start-stop-daemon --start --quiet --oknodo --exec /usr/bin/irexec -- -d /etc/lirc/lircrc < /dev/null log_end_msg $? fi ;; stop) in_kernel_support "enable" if [ "$START_IREXEC" = "true" ]; then log_daemon_msg "Stopping execution daemon: irexec" start-stop-daemon --stop --oknodo --quiet --exec /usr/bin/irexec log_end_msg $? fi if [ "$START_LIRCMD" = "true" ]; then log_daemon_msg "Stopping remote control mouse daemon: LIRCMD" start-stop-daemon --stop --oknodo --quiet --exec /usr/sbin/lircmd log_end_msg $? fi if [ "$START_LIRCD" = "true" ]; then log_daemon_msg "Stopping remote control daemon(s): LIRC" start-stop-daemon --stop --oknodo --quiet --exec /usr/sbin/lircd --pidfile /run/lirc/lircd.pid start-stop-daemon --stop --oknodo --quiet --exec /usr/sbin/lircd --pidfile /run/lirc/lircd1.pid log_end_msg $? [ -h "$OLD_SOCKET" ] && rm -f $OLD_SOCKET [ -h "${OLD_SOCKET}1" ] && rm -f ${OLD_SOCKET}1 fi ;; reload|force-reload) if [ "$START_IREXEC" = "true" ]; then start-stop-daemon --stop --quiet --signal 1 --exec /usr/bin/irexec fi if [ "$START_LIRCD" = "true" ]; then start-stop-daemon --stop --quiet --signal 1 --exec /usr/sbin/lircd fi if [ "$START_LIRCMD" = "true" ]; then start-stop-daemon --stop --quiet --signal 1 --exec /usr/sbin/lircmd fi ;; restart) $0 stop #passes parameter $2 which is possibly our udev paramater $0 start $2 ;; *) echo "Usage: /etc/init.d/lircd {start|stop|reload|restart|force-reload}" exit 1 esac exit 0 debian/lirc.udev0000664000000000000000000000104012311234255010777 0ustar #These rules are currently only adapted for a single lirc device. #They are mainly used for hotplugability of the USB devices #So that the user won't have to restart the lircd process. # #If a user has multiple lirc devices, and removes one of them #The other will stop working as well. This is a side effect #of both this udev script as well as the lirc architecture #Of chaining lircd processes. ACTION=="add", KERNEL=="lirc[0-9]", RUN="/etc/init.d/lirc restart udev" ACTION=="remove", KERNEL=="lirc[0-9]", RUN="/etc/init.d/lirc stop udev" debian/lircd.conf0000664000000000000000000000066412311234255011140 0ustar # # LIRCd configuration file. # # Put here the arguments to run the daemon with. # --driver # selects the user-land driver to use (use "default", or don't set this if # you have a kernel driver for your interface) # --device # selects the device file to use for drivers which use the normal kernel # serial or parallel-port drivers # eg #LIRCD_ARGS="--driver=logitech --device=/dev/ttyS1" LIRCD_ARGS="" # End of file. debian/hardware.conf0000664000000000000000000000240312311234255011631 0ustar # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="None" REMOTE_MODULES="" REMOTE_DRIVER="" REMOTE_DEVICE="" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Disable kernel support. #Typically, lirc will disable in-kernel support for ir devices in order to #handle them internally. Set to false to prevent lirc from disabling this #in-kernel support. #DISABLE_KERNEL_SUPPORT="true" #Enable lircd START_LIRCD="false" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" debian/lirc.examples0000664000000000000000000000005012311234255011652 0ustar contrib/{lircrc,lircd.conf,lircmd.conf} debian/lirc.docs0000664000000000000000000000005412311234255010770 0ustar NEWS README ANNOUNCE TODO doc/irxevent.keys debian/lirc.postrm0000664000000000000000000000020212311234255011357 0ustar #!/bin/sh set -e if [ -f /usr/share/debconf/confmodule ]; then . /usr/share/debconf/confmodule fi #DEBHELPER# db_stop || true debian/compat0000664000000000000000000000000212311234255010364 0ustar 7 debian/lirc.links0000664000000000000000000000023112311234255011155 0ustar usr/share/lirc/remotes usr/share/doc/lirc/remotes usr/share/lirc/lirc.hwdb usr/share/doc/lirc/lirc.hwdb usr/share/lirc/extras usr/share/doc/lirc/extras debian/README.Debian0000664000000000000000000000321112311234255011224 0ustar Debianization README for LIRC notes =================================== If you need irxevent or xmode2 they can be found in lirc-x package. And if you need smode2 it can be found in lirc-svga package. This split has been done to prevent dependencies on xlibs and svgalib for the main lirc package. If you use lirc_sir or lirc_serial kernel modules you should either remove the official serial driver or use 'setserial /dev/ttySX uart none' so it releases the serial port for use with lirc. For fine tuning you should look at /etc/lirc/hardware.conf If you already have a proper configuration file for the libirman package, you may convert it to lirc syntax with irman2lirc. For more information take a look at html/configure.html. TROUBLE SHOOTING ---------------- We currently try to do it all automatically but if we miss the target there are ways to solve this: If you configure lircmd to use IMPS/2 protocol gpm will refuse to work with it, you will have to use IntelliMouse or MouseSystems for gpm to work. You can find detailed information on how to configure lircmd in: /usr/share/doc/lirc/html/configure.html If the installation can't find proper configuration files for your hardware or you have special needs, you may find one under the remotes/ directory or at least a sample to start with. Or you can make your own from scratch with irrecord. Read the documentation under html/ for more details. If you need to use a different device or driver, you can select them manually in /etc/lirc/hardware.conf. Running lircd --driver=blah will give a list of supported drivers. -- Manuel Estrada Sainz Sat, 9 Jun 2001 18:40:00 +0100 debian/rules0000775000000000000000000001250012311310513010234 0ustar #!/usr/bin/make -f # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 ifneq ($(findstring debug,$(DEB_BUILD_OPTIONS)),) CFLAGS += -g endif ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) INSTALL_PROGRAM += -s endif DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) UVERS := $(shell dpkg-parsechangelog | sed -n 's/^Version: \(.*\)-.*/\1/p') configure_flags := \ --prefix=/usr \ --mandir=\$${prefix}/share/man \ --infodir=\$${prefix}/share/info \ --libdir=\$${prefix}/lib \ --sysconfdir=/etc/lirc/ \ --with-driver=userspace \ --with-syslog=LOG_DAEMON \ --enable-sandboxed \ --build=$(DEB_BUILD_GNU_TYPE) ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE)) configure_flags += --host=$(DEB_HOST_GNU_TYPE) endif clean: dh_testdir dh_testroot rm -f debian/po/messages.mo rm -f configure-stamp build-stamp debconf-updatepo [ ! -f doc/lirc.hwdb.orig ] || mv -f doc/lirc.hwdb.orig doc/lirc.hwdb [ ! -f Makefile ] || $(MAKE) distclean dh_autoreconf_clean @if [ ! "$(UVERS)" = "$(shell sed -n 's/^Version: \(.*\)/\1/p' debian/liblircclient0.pc)" ]; then \ echo "ERROR: debian/liblircclient0.pc out of date."; \ false; \ fi dh_clean configure: configure-stamp configure-stamp: dh_testdir [ ! -f doc/lirc.hwdb.orig ] && mv -f doc/lirc.hwdb doc/lirc.hwdb.orig && sed 's/lirc_dev lirc_gpio/devinput/' doc/lirc.hwdb.orig > doc/lirc.hwdb -test -r config.sub && test -r /usr/share/misc/config.sub && \ cp -f /usr/share/misc/config.sub config.sub -test -r config.guess && test -r /usr/share/misc/config.guess && \ cp -f /usr/share/misc/config.guess config.guess dh_autoreconf ./configure $(configure_flags) touch $@ build: configure build-stamp build-stamp: dh_testdir $(MAKE) touch $@ install: build-stamp dh_testdir dh_testroot dh_prep dh_clean dh_installdirs $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp install --mode=755 contrib/irman2lirc debian/tmp/usr/bin/ # allow building even if vgalib is not available if [ -e tools/smode2 ]; then \ install --mode=755 tools/smode2 debian/tmp/usr/bin/ ; \ fi mkdir -p debian/tmp/etc/lirc/ mkdir -p debian/tmp/usr/share/lirc/ mkdir -p debian/tmp/usr/share/hal/fdi/preprobe/20thirdparty install --mode=644 debian/conf.placeholder \ debian/tmp/etc/lirc/lircd.conf install --mode=644 debian/conf.placeholder \ debian/tmp/etc/lirc/lircmd.conf install --mode=644 debian/hardware.conf debian/tmp/etc/lirc/ install --mode=644 debian/lirc.fdi \ debian/tmp/usr/share/hal/fdi/preprobe/20thirdparty/lirc.fdi mkdir -p debian/tmp/usr/src/lirc-${UVERS} cp -dpR drivers debian/tmp/usr/src/lirc-${UVERS}/ find debian/tmp/usr/src/lirc-${UVERS} -name "*.o" -o -name Makefile.in \ -o -name Makefile.am -o -name "*.ko"| xargs rm for file in `find debian/tmp/usr/src/lirc-${UVERS} -name Makefile`; \ do sed -e 's/^Makefile:.*/Makefile:/g' \ -e'/^CC *=/d' -e '/^KERNEL_LOCATION *=/d' \ $$file > $$file.tmp && \ mv $$file.tmp $$file; \ done sed -n \ -e'/define *DEV_LIRC\>/p' \ -e'/define *LIRC_MAJOR\>/p' \ config.h > debian/tmp/usr/src/lirc-${UVERS}/config.h mkdir -p debian/liblircclient-dev/usr/share/aclocal cp contrib/lirc.m4 debian/liblircclient-dev/usr/share/aclocal/ # install logcheck files install -d debian/tmp/etc/logcheck/ignore.d.paranoid install -o root -g root -m 644 debian/logcheck.ignore \ debian/tmp/etc/logcheck/ignore.d.paranoid/lirc install -d debian/tmp/etc/logcheck/ignore.d.server install -o root -g root -m 644 debian/logcheck.ignore \ debian/tmp/etc/logcheck/ignore.d.server/lirc install -d debian/tmp/etc/logcheck/ignore.d.workstation install -o root -g root -m 644 debian/logcheck.ignore \ debian/tmp/etc/logcheck/ignore.d.workstation/lirc # install pkg-config file install -d debian/tmp/usr/lib/pkgconfig install -o root -g root -m644 debian/liblircclient0.pc debian/tmp/usr/lib/pkgconfig/liblircclient0.pc # Build architecture-independent files here. binary-indep: build install dh_installdocs -i dh_installchangelogs -i ChangeLog dh_install -i --sourcedir=debian/tmp --list-missing dh_compress -i dh_fixperms -i dh_installdeb -i dh_gencontrol -i dh_md5sums -i dh_builddeb -i # Build architecture-dependent files here. binary-arch: build install dh_testdir dh_testroot dh_installchangelogs -s ChangeLog dh_installdocs -s cp -dpR doc/html doc/images doc/irxevent.keys \ debian/lirc/usr/share/doc/lirc/ mkdir debian/lirc/usr/share/lirc cp -dpR remotes debian/lirc/usr/share/lirc/remotes cp -dpR debian/extras debian/lirc/usr/share/lirc/extras cp -dpR doc/lirc.hwdb debian/lirc/usr/share/lirc #sed 's/lirc_dev lirc_gpio/devinput/' doc/lirc.hwdb > debian/lirc/usr/share/lirc.hwdb dh_installexamples -s dh_install -s --sourcedir=debian/tmp --list-missing dh_installmenu -s dh_installdebconf -plirc dh_installinit -s --update-rcd-params="defaults 19" dh_installudev --priority=85 dh_installcron -s dh_installinfo -s dh_installmodules -s dh_installman -s @for i in lirc-x lirc-svga; do \ rm -rf debian/$${i}/usr/share/doc/$${i} ;\ done dh_link -s dh_strip -s dh_compress -s -X irxevent.keys dh_fixperms -s dh_makeshlibs -s dh_installdeb -s dh_shlibdeps -s dh_gencontrol -s dh_md5sums -s dh_builddeb -s binary: binary-indep binary-arch .PHONY: build clean binary-indep binary-arch binary install autotools debian/doc-base.lirc0000664000000000000000000000042712311234255011521 0ustar Document: lirc Title: LIRC (Linux Infrared Remote Control) Author: Christoph Bartelmus , Karsten Scheibler Abstract: Section: Help Format: HTML Index: /usr/share/doc/lirc/html/index.html Files: /usr/share/doc/lirc/html/*.html debian/lirc.fdi0000664000000000000000000000141612311234255010605 0ustar true true true true true debian/source/0000775000000000000000000000000012311315253010464 5ustar debian/source/format0000664000000000000000000000001412311234255011674 0ustar 3.0 (quilt) debian/lirc.postinst0000664000000000000000000003641212311277175011742 0ustar #!/bin/sh set -e check_hardware_conf () { #Make sure that all variables are there, and also create the file if #it is not there #local VAR for VAR in REMOTE REMOTE_MODULES REMOTE_DRIVER REMOTE_DEVICE REMOTE_SOCKET REMOTE_LIRCD_CONF REMOTE_LIRCD_ARGS TRANSMITTER TRANSMITTER_MODULES TRANSMITTER_DRIVER TRANSMITTER_DEVICE TRANSMITTER_SOCKET TRANSMITTER_LIRCD_CONF TRANSMITTER_LIRCD_ARGS START_LIRCD START_LIRCMD LOAD_MODULES LIRCMD_CONF FORCE_NONINTERACTIVE_RECONFIGURATION do # Patch provided by Robert Bihlmeyer # See http://bugs.debian.org/303078 if ! grep -q "^[ ]*$VAR\>" /etc/lirc/hardware.conf; then echo "$VAR=\"\"" >> /etc/lirc/hardware.conf fi done } Save () { if [ -f $1 ]; then cp $1 $1.old fi sed -i -e " s|^\(REMOTE\)=.*|\1=\"$REMOTE\"|; s|^\(REMOTE_DRIVER\)=.*|\1=\"$REMOTE_DRIVER\"|; s|^\(REMOTE_MODULES\)=.*|\1=\"$REMOTE_MODULES\"|; s|^\(REMOTE_DEVICE\)=.*|\1=\"$REMOTE_DEVICE\"|; s|^\(REMOTE_LIRCD_CONF\)=.*|\1=\"$REMOTE_LIRCD_CONF\"|; s|^\(TRANSMITTER\)=.*|\1=\"$TRANSMITTER\"|; s|^\(TRANSMITTER_DRIVER\)=.*|\1=\"$TRANSMITTER_DRIVER\"|; s|^\(TRANSMITTER_MODULES\)=.*|\1=\"$TRANSMITTER_MODULES\"|; s|^\(TRANSMITTER_DEVICE\)=.*|\1=\"$TRANSMITTER_DEVICE\"|; s|^\(TRANSMITTER_LIRCD_CONF\)=.*|\1=\"$TRANSMITTER_LIRCD_CONF\"|; s|^\(START_LIRCD\)=.*|\1=\"$START_LIRCD\"|; s|^\(LIRCMD_CONF\)=.*|\1=\"$LIRCMD_CONF\"|; s|^\(FORCE_NONINTERACTIVE_RECONFIGURATION\)=.*|\1=\"$FORCE_NONINTERACTIVE_RECONFIGURATION\"|; " $1 } ChooseRemote() { OLDREMOTE="${REMOTE:-None}" OLDTRANSMITTER="${TRANSMITTER:-None}" #force reconfiguration. can be set by external applications #to true if they want to bypass the normal methods presented #to users and instead just parse the file. FORCE_NONINTERACTIVE_RECONFIGURATION=`grep "^FORCE_NONINTERACTIVE_RECONFIGURATION=" /etc/lirc/hardware.conf | sed s/\"//g | awk -F "=" '{print $2}'` #Present the user with some choices #To later explain what this is actually doing without man pages: #First, only grab lines with a ; #Now, remove all commas from streams #Now, Remove all remaining comments or ['s #Now, Print the remote name #Next, sort the list and remove duplicates #Now, Affix a comma and space to all starts of lines #Lastly, change the newline to a null character REMOTES=`cat /usr/share/lirc/lirc.hwdb /usr/share/lirc/extras/more_remotes.hwdb 2>/dev/null | grep ";" | sed 's/,//g' | awk -F ";" '$0!~/^#|^\[/{print $1}' | sort -u | sed 's/^/,\ /' | tr '\n' '\0'` db_subst lirc/remote REMOTES $REMOTES TRANSMITTERS=`grep ";" /usr/share/lirc/extras/transmitter.hwdb | sort | sed 's/,//g' | awk -F ";" '$0!~/^#|^\[/{print $1}' | sed 's/^/,\ /' | tr '\n' '\0'` db_subst lirc/transmitter TRANSMITTERS $TRANSMITTERS db_set lirc/remote "$REMOTE" db_set lirc/transmitter "$TRANSMITTER" #If we are forcing a reconfigure, then our old remote and new ones are the same if [ "$FORCE_NONINTERACTIVE_RECONFIGURATION" != "true" ]; then db_input high lirc/remote || true db_input high lirc/transmitter || true db_go fi #Populate remote information (remote is our primary device at all times) db_get lirc/remote REMOTE="${RET}" db_get lirc/transmitter TRANSMITTER="${RET}" SUPPORTED_DRIVERS=`lircd -H help 2>&1 | awk '$0!~/^S|^D/{print $1}' | tr '\n' '\ '` if [ "$REMOTE" != "None" ] && [ "$REMOTE" != "Custom" ] && ([ "$OLDREMOTE" != "$REMOTE" ] || [ "$FORCE_NONINTERACTIVE_RECONFIGURATION" = "true" ]) then #To later explain what this is actually doing without man pages: #First, only grab lines with a ; #Now, remove all commas from streams #Lastly, take the last matching entry found (so remotes.hwdb overrides lirc.hwdb) REMOTE_LINE=`cat /usr/share/lirc/lirc.hwdb /usr/share/lirc/extras/more_remotes.hwdb 2>/dev/null | sed -n '/;/ { s/,//g; p }' | grep "${REMOTE}" | tail -1` #Remove all remaining comments or ['s #then print the remote name REMOTE_MODULES=`echo $REMOTE_LINE | awk -F ";" '$0!~/^#|^\[/{print $3}'` REMOTE_DRIVER=`echo $REMOTE_LINE | awk -F ";" '$0!~/^#|^\[/{print $2}'` REMOTE_LIRCD_CONF=`echo $REMOTE_LINE | awk -F ";" '$0!~/^#|^\[/{print $5}'` #/dev/input/eventX is a weird case: filter it if [ "$REMOTE_LIRCD_CONF" = "generic config file for Linux input layer" ]; then REMOTE_LIRCD_CONF="" fi #For atilibusb, we need to blacklist the kernel module if [ "$REMOTE_DRIVER" = "atilibusb" ]; then BLACKLIST="lirc_atiusb ati_remote" elif [ "$REMOTE_DRIVER" = "atiusb" ]; then BLACKLIST="ati_remote" else BLACKLIST="" fi #lirc.hwdb puts none rather than ;; if [ "$REMOTE_MODULES" != "none" ]; then #if we have a module in use, don't use a driver too REMOTE_DRIVER="" else REMOTE_MODULES="" fi #lirc.hwdb puts none rather than ;; if [ "$REMOTE_DRIVER" = "none" ]; then REMOTE_DRIVER="" fi #only need to put driver for non kernel module devices if ! echo "$SUPPORTED_DRIVERS" | grep "$REMOTE_DRIVER" > /dev/null; then REMOTE_DRIVER="" fi #reset our REMOTE_DEVICE whenever remotes #are changed. Calculated later. REMOTE_DEVICE="" CONFIG_CHANGED=: elif [ "$OLDREMOTE" != "$REMOTE" ] && [ "$REMOTE" = "None" ]; then CONFIG_CHANGED=: REMOTE_DEVICE="" REMOTE_MODULES="" REMOTE_DRIVER="" REMOTE_LIRCD_CONF="" fi #If we have a devinput driver, we need #to present the user with a way to figure out #what device is it #This should be ran even if they haven't changed remotes if [ "$REMOTE_DRIVER" = "devinput" ]; then #present question EVENTS=`find /dev/input/* -type d -exec find {} -not -type d -printf ", %p" \;` db_subst lirc/dev_input_device EVENTS $EVENTS db_input high lirc/dev_input_device || true db_go #get our answer db_get lirc/dev_input_device if [ "$RET" != "$REMOTE_DEVICE" ]; then REMOTE_DEVICE="$RET" CONFIG_CHANGED=: fi elif [ "$REMOTE_DRIVER" = "dvico" ];then #present question EVENTS=`ls /dev/usb | sed 's/^/,\ \/dev\/usb\//' | tr '\n' '\0'` db_subst lirc/dev_input_device EVENTS $EVENTS db_input high lirc/dev_input_device || true db_go #get our answer db_get lirc/dev_input_device if [ "$RET" != "$REMOTE_DEVICE" ]; then REMOTE_DEVICE="$RET" CONFIG_CHANGED=: fi #otherwise, set our old device in debconf again else db_set lirc/dev_input_device /dev/lirc0 db_fset lirc/dev_input_device seen false fi if [ "$TRANSMITTER" != "None" ] && [ "$TRANSMITTER" != "Custom" ] && ([ "$OLDTRANSMITTER" != "$TRANSMITTER" ] || [ "$FORCE_NONINTERACTIVE_RECONFIGURATION" = "true" ]) then TRANSMITTER_LINE=`sed -n '/;/ { s/,//g; p }' /usr/share/lirc/extras/transmitter.hwdb | grep "${TRANSMITTER}" | tail -1` TRANSMITTER_MODULES=`echo $TRANSMITTER_LINE | awk -F ";" '$0!~/^#|^\[/{print $3}'` TRANSMITTER_DRIVER=`echo $TRANSMITTER_LINE | awk -F ";" '$0!~/^#|^\[/{print $2}'` TRANSMITTER_LIRCD_CONF=`echo $TRANSMITTER_LINE | awk -F ";" '$0!~/^#|^\[/{print $5}'` #transmitter.hwdb puts none rather than ;; if [ "$TRANSMITTER_MODULES" != "none" ]; then #if we have a module in use, don't use a driver too TRANSMITTER_DRIVER="" else TRANSMITTER_MODULES="" fi #transmitter.hwdb puts none rather than ;; if [ "$TRANSMITTER_DRIVER" = "none" ]; then TRANSMITTER_DRIVER="" fi #only need to put driver for non kernel module devices if ! echo "$SUPPORTED_DRIVERS" | grep "$TRANSMITTER_DRIVER" > /dev/null; then TRANSMITTER_DRIVER="" fi CONFIG_CHANGED=: elif [ "$OLDTRANSMITTER" != "$TRANSMITTER" ] && [ "$TRANSMITTER" = "None" ] then CONFIG_CHANGED=: TRANSMITTER_DEVICE="" TRANSMITTER_DRIVER="" TRANSMITTER_MODULES="" TRANSMITTER_LIRCD_CONF="" fi #Choose a serial port if we are using serial if [ "$REMOTE_MODULES" = "lirc_dev lirc_serial" ] || [ "$TRANSMITTER_MODULES" = "lirc_dev lirc_serial" ] then db_input high lirc/serialport || true db_go #if we aren't using serial, then go back to default else db_set lirc/serialport "/dev/ttyS0" db_fset lirc/serialport seen false fi #Plan to have lircd enabled START_LIRCD=true #If we have a remote and a transmitter, figure out devices if [ "$TRANSMITTER" != "None" ] && [ "$REMOTE" != "None" ]; then #Make sure that at least one of these has changed before we make changes if [ "$OLDREMOTE" != "$REMOTE" ] || [ "$OLDTRANSMITTER" != "$TRANSMITTER" ]; then #if no remote device is defined already #and we do use a kernel module if [ -z "$REMOTE_DEVICE" ] && [ -n "$REMOTE_MODULES" ] then REMOTE_DEVICE="/dev/lirc0" fi #set up our transmitter. #if we use the same kernel modules, we use the same device #and we should disable transmitter stuff further if ([ -n "$TRANSMITTER_MODULES" ] && [ "$TRANSMITTER_MODULES" = "$REMOTE_MODULES" ]) \ || ([ -n "$TRANSMITTER_DRIVER" ] && [ "$TRANSMITTER_DRIVER" = "$REMOTE_DRIVER" ]) then TRANSMITTER_DEVICE="" TRANSMITTER_DRIVER="" #if they aren't the same driver/device, we needed a remote module and we need a transmitter kernel module elif [ "$REMOTE_DEVICE" = "/dev/lirc0" ] && [ -n "$TRANSMITTER_MODULES" ] then TRANSMITTER_DEVICE="/dev/lirc1" #if they aren't the same driver/device, but we didn't need a remote module, but need a transmitter kernel module elif [ -n "$TRANSMITTER_MODULES" ]; then TRANSMITTER_DEVICE="/dev/lirc0" fi fi #if we have just a transmitter, figure out device elif [ "$TRANSMITTER" != "None" ]; then #if we need kernel transmitter modules if [ -n "$TRANSMITTER_MODULES" ]; then TRANSMITTER_DEVICE="/dev/lirc0" fi #we have just chosen a remote elif [ "$REMOTE" != "None" ]; then #no remote device is defined already #and we need kernel remote modules if [ -z "$REMOTE_DEVICE" ] && [ -n "$REMOTE_MODULES" ] ; then REMOTE_DEVICE="/dev/lirc0" fi #if both remote and transmitter are set to none else #disable lircd START_LIRCD=false fi } Setup_Blacklist() { if [ -n "$BLACKLIST" ]; then cat > /etc/modprobe.d/lirc-blacklist.conf <> /etc/modprobe.d/lirc-blacklist.conf if egrep -q '^'"$item"'\ ' /proc/modules; then rmmod $item fi done else rm -f /etc/modprobe.d/lirc-blacklist.conf fi } Setup_Serial() { #Move out old config if [ -f /etc/serial.conf ]; then mv /etc/serial.conf /etc/serial.conf.old fi #figure out if we have serial modules at all if [ "$REMOTE_MODULES" = "lirc_dev lirc_serial" ] || [ "$TRANSMITTER_MODULES" = "lirc_dev lirc_serial" ]; then #if we chose ttyS0 or ttyS1, add it to modprobe.d db_get lirc/serialport SERIAL=$RET if [ "$SERIAL" = "/dev/ttyS0" ]; then cat > /etc/modprobe.d/lirc-serial.conf < /etc/modprobe.d/lirc-serial.conf < /etc/serial.conf << EOF $SERIAL uart none EOF #reload setserial to turn off serial port invoke-rc.d etc-setserial restart else rm -f /etc/modprobe.d/lirc-serial.conf fi } setup_lircd_conf() { #if we have an existing file, back it up if [ -f "/etc/lirc/lircd.conf" ]; then mv /etc/lirc/lircd.conf /etc/lirc/lircd.conf.dpkg-old fi #Add a header to the lircd.conf cat >> /etc/lirc/lircd.conf << EOF #This configuration has been automatically generated via #the Ubuntu LIRC package maintainer scripts. # #It includes the default configuration for the remote and/or #transmitter that you have selected during package installation. # #Feel free to add any custom remotes to the configuration #via additional include directives or below the existing #Ubuntu include directives from your selected remote and/or #transmitter. EOF #if we have a remote, include its config if [ -f "/usr/share/lirc/extras/more_remotes/$REMOTE_LIRCD_CONF" ] then cat >> /etc/lirc/lircd.conf <> /etc/lirc/lircd.conf <> /etc/lirc/lircd.conf <> /etc/lirc/lircd.conf <> /etc/lirc/lircd.conf <> /etc/lirc/lircd.conf <> /etc/lirc/lircd.conf </dev/null || true fi done } . /usr/share/debconf/confmodule if [ "$1" = "configure" ]; then CONFIG_CHANGED=false if dpkg --compare-versions "$2" lt-nl "0.9.0-0ubuntu5"; then rm -f /etc/modprobe.d/lirc-blacklist fi [ -x /sbin/udevd ] && invoke-rc.d udev reload >&2 #unload any old modules before starting unload_modules check_hardware_conf . /etc/lirc/hardware.conf #parse the lirc.hwdb to find our remote ChooseRemote Save /etc/lirc/hardware.conf #Prepare the blacklisting for necessary modules Setup_Blacklist #Setup serial module Setup_Serial # If we don't have a valid lircd.conf try to get one if [ ! -f /etc/lirc/lircd.conf ] \ || grep -q "^#UNCONFIGURED" /etc/lirc/lircd.conf \ || $CONFIG_CHANGED ;then setup_lircd_conf fi # If we don't have a valid lircmd.conf try to get one if [ ! -f /etc/lirc/lircmd.conf ] \ || grep -q "^#UNCONFIGURED" /etc/lirc/lircmd.conf ;then # if there is a misplaced config file it is ok to move it to # the right place if [ -f /etc/lircmd.conf ];then echo moving /etc/lircmd.conf to /etc/lirc/ mv /etc/lircmd.conf /etc/lirc/ # we don't restore the file unless the user is (re)configuring elif $CONFIG_CHANGED \ && [ -f "/usr/share/lirc/extras/more_remotes/$RET" ];then echo trying default lircmd.conf cp /usr/share/lirc/extras/more_remotes/$RET \ /etc/lirc/lircmd.conf elif $CONFIG_CHANGED \ && [ -f "/usr/share/lirc/remotes/$RET" ];then echo trying default lircmd.conf cp /usr/share/lirc/remotes/$RET \ /etc/lirc/lircmd.conf fi fi fi db_stop #DEBHELPER# debian/help2man.inc0000664000000000000000000000021312311234255011363 0ustar [see also] The documentation for .B lirc is maintained as a html pages. And in debian they are distribured in: /usr/share/doc/lirc/html/ debian/liblircclient0.pc0000664000000000000000000000032212311234255012406 0ustar prefix=/usr exec_prefix=${prefix} libdir=${exec_prefix}/lib includedir=${prefix}/include Name: liblircclient0 Description: liblircclient0 Version: 0.9.0 Libs: -L${libdir} -llirc_client Cflags: -I${includedir} debian/lirc.templates0000664000000000000000000000366012311252066012044 0ustar # These templates have been reviewed by the debian-l10n-english # team # # If modifications/additions/rewording are needed, please ask # debian-l10n-english@lists.debian.org for advice. # # Even minor modifications require translation updates and such # changes should be coordinated with translators and reviewers. Template: lirc/remote Type: select Choices: None, Custom${REMOTES} Default: None _Description: Remote control configuration: If you choose a remote or transmitter, but already have a configuration file in /etc/lirc/lircd.conf, the existing file will be renamed to /etc/lirc/lircd.conf.dpkg-old and the community configurations loaded into /etc/lirc/lircd.conf. If you have a /etc/lirc/lircd.conf.dpkg-old file already, it will not be overwritten and your current /etc/lirc/lircd.conf will be lost. Template: lirc/transmitter Type: select Choices: None, Custom${TRANSMITTERS} Default: None _Description: IR transmitter, if present: IR transmitters can be used for controlling external devices. Some devices are considered transceivers, with the ability to both send and receive. Other devices require separate hardware to accomplish these tasks. Template: lirc/dev_input_device Type: select Choices: /dev/lirc0${EVENTS} Default: /dev/lirc0 _Description: Custom event interface for your dev/input device: Many remotes that were previously supported by the lirc_gpio interface now need to be set up via the dev/input interface. You will need to custom select your remote's event character device. This can be determined by 'cat /proc/bus/input/devices'. Template: lirc/serialport Type: select Choices: /dev/ttyS0, /dev/ttyS1 Default: /dev/ttyS0 _Description: Port your serial device is attached to: The UART (serial) driver is a low level driver that takes advantage of bit banging a character device. This means that you can only use it with hardware serial devices. It unfortunately does not work with USB serial devices. debian/liblircclient-dev.install0000664000000000000000000000012612311234255014150 0ustar usr/lib/liblirc_client.so usr/lib/liblirc_client.a usr/include/lirc usr/lib/pkgconfig debian/lirc-x.links0000664000000000000000000000005012311234255011421 0ustar usr/share/doc/lirc usr/share/doc/lirc-x debian/lirc-svga.install0000664000000000000000000000005312311234255012443 0ustar usr/bin/smode2 usr/share/man/man1/smode2.1 debian/control0000664000000000000000000000470412311234255010576 0ustar Source: lirc Section: utils Priority: extra Maintainer: Ubuntu Developers XSBC-Original-Maintainer: lirc Maintainer Team Build-Depends: debhelper (>= 7.0.50~), dh-autoreconf, bzip2, libusb-dev [!hurd-i386], libasound2-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64], libice-dev, libsm-dev, libx11-dev, libirman-dev, libftdi-dev, autotools-dev, portaudio19-dev, devscripts, quilt, libxt-dev, po-debconf Standards-Version: 3.9.1 Uploaders: Matthew Johnson , Stefan Lippers-Hollmann , Sven Müller Vcs-Bzr: lp:~mythbuntu-dev/lirc/ubuntu #Vcs-Svn: svn://svn.debian.org/svn/pkg-lirc/lirc/trunk/ #Vcs-Browser: http://svn.debian.org/viewsvn/pkg-lirc/lirc/trunk/ Homepage: http://lirc.org Package: lirc Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base, setserial Recommends: udev Suggests: lirc-x Replaces: lirc-modules-source Conflicts: makedev (<< 2.3.1-88), lirc-modules-source Description: infra-red remote control support LIRC stands for 'Linux Infra-red Remote Control'. . This package provides the daemons and some utilities to support infra-red remote controls under Linux. Package: lirc-x Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, lirc (= ${binary:Version}) Replaces: lirc (<< 0.6.4-8) Recommends: xfonts-75dpi Description: infra-red remote control support - X utilities LIRC stands for 'Linux Infra-red Remote Control'. . This package provides X utilities for LIRC: irxevent: allows controlling X applications with a remote control; xmode2 : shows the IR waveform of the remote controller without an oscilloscope. Unneeded for TV cards or the Irman. Package: liblircclient-dev Architecture: any Section: libdevel Depends: ${misc:Depends}, liblircclient0 (= ${binary:Version}), libc6-dev Description: infra-red remote control support - client library development files LIRC stands for 'Linux Infra-red Remote Control'. . This package contains the static library and headers for the LIRC client library. Package: liblircclient0 Priority: optional Architecture: any Section: libs Depends: ${shlibs:Depends}, ${misc:Depends} Suggests: lirc Description: infra-red remote control support - client library LIRC stands for 'Linux Infra-red Remote Control'. . This package provides a library with functions to support remote controls via LIRC in programs such as xawtv.