abook-0.6.0pre2000777 000764 000764 00000000000 10477555701 014113 5ustar00jaakkojaakko000000 000000 abook-0.6.0pre2/doc000777 000764 000764 00000000000 10477555701 014660 5ustar00jaakkojaakko000000 000000 abook-0.6.0pre2/intl000777 000764 000764 00000000000 10477555701 015061 5ustar00jaakkojaakko000000 000000 abook-0.6.0pre2/m4000777 000764 000764 00000000000 10477555700 014432 5ustar00jaakkojaakko000000 000000 abook-0.6.0pre2/po000777 000764 000764 00000000000 10477555702 014532 5ustar00jaakkojaakko000000 000000 abook-0.6.0pre2/README000644 000764 000764 00000004504 10477227715 015052 0ustar00jaakkojaakko000000 000000 ABOOK by JH ----- Abook is an addressbook program with mutt mail client support. COMPILATION To compile abook you must have ncurses development libraries installed. Starting from version 0.4.10 abook is known to compile with the native curses library of SUN Solaris and OpenBSD. Since version 0.5.0 GNU readline is required. Please note that other readline implementations don't work. If you compile with --enable-debug flag you should redirect standard error to somewhere. (for example abook 2> debug or abook 2> /dev/null) Abook has been compiled and tested successfully on following platforms: (NOTE: All versions of abook haven't been tested on all platforms.) Linux (distributions with moderately new GNU ncurses and GNU readline libraries should work) Darwin Solaris FreeBSD OpenBSD NetBSD GNU/Hurd AIX 3.2.5 HPUX Irix 6.5 DEC alpha ? INSTALLATION See INSTALL for detailed instructions. If you want to use abook with mutt you should add following lines to your ~/.muttrc or to the systemwide /etc/Muttrc file. set query_command="abook --mutt-query '%s'" macro pager A |'abook --add-email'\n After this you can make queries from mutt using the query command ('Q') and add sender e-mail addresses to the addressbook from pager using 'A' command. (Of course you can choose another keybinding if you like.) It's also recommended to set pipe_decode variable in mutt configuration. See the mutt manual for details. UPGRADING FROM VERSION 0.5 See RELEASE_NOTES . UPGRADING FROM VERSION 0.4 You must import your abook 0.4 addressbook file because it is stored to a different location. Configuration file is now located to $HOME/.abook/ directory and it's called abookrc . (without leading dot) NOTES If your language specific characters don't work correctly make sure that your locale configuration has been done properly. (On Linux you must set at least LC_CTYPE environment variable) If you want to import a ldif file generated by abook in Netscape you must use the extension ``.4ld''. OBTAINING ABOOK Get the latest version from http://abook.sourceforge.net/ LICENSE All files in this distribution are released under GNU GENERAL PUBLIC LICENSE. See COPYING for details. CONTACT AUTHORS Send bugreports, fixes, wishes etc. to abook mailing list: https://lists.sourceforge.net/lists/listinfo/abook-devel abook-0.6.0pre2/acinclude.m4000644 000764 000764 00000013405 07443103410 016343 0ustar00jaakkojaakko000000 000000 dnl --------------------------------------------------------------------------- dnl Look for the curses libraries. Older curses implementations may require dnl termcap/termlib to be linked as well. AC_DEFUN([CF_CURSES_LIBS],[ AC_CHECK_FUNC(initscr,,[ case $host_os in #(vi freebsd*) #(vi AC_CHECK_LIB(mytinfo,tgoto,[LIBS="-lmytinfo $LIBS"]) ;; hpux10.*|hpux11.*) AC_CHECK_LIB(cur_colr,initscr,[ LIBS="-lcur_colr $LIBS" CFLAGS="-I/usr/include/curses_colr $CFLAGS" ac_cv_func_initscr=yes ],[ AC_CHECK_LIB(Hcurses,initscr,[ # HP's header uses __HP_CURSES, but user claims _HP_CURSES. LIBS="-lHcurses $LIBS" CFLAGS="-D__HP_CURSES -D_HP_CURSES $CFLAGS" ac_cv_func_initscr=yes ])]) ;; linux*) # Suse Linux does not follow /usr/lib convention LIBS="$LIBS -L/lib" ;; esac if test ".$With5lib" != ".no" ; then if test -d /usr/5lib ; then # SunOS 3.x or 4.x CPPFLAGS="$CPPFLAGS -I/usr/5include" LIBS="$LIBS -L/usr/5lib" fi fi if test ".$ac_cv_func_initscr" != .yes ; then cf_save_LIBS="$LIBS" cf_term_lib="" cf_curs_lib="" # Check for library containing tgoto. Do this before curses library # because it may be needed to link the test-case for initscr. AC_CHECK_FUNC(tgoto,[cf_term_lib=predefined],[ for cf_term_lib in termcap termlib unknown do AC_CHECK_LIB($cf_term_lib,tgoto,[break]) done ]) # Check for library containing initscr test "$cf_term_lib" != predefined && test "$cf_term_lib" != unknown && LIBS="-l$cf_term_lib $cf_save_LIBS" for cf_curs_lib in cursesX curses ncurses xcurses jcurses unknown do AC_CHECK_LIB($cf_curs_lib,initscr,[break]) done test $cf_curs_lib = unknown && AC_ERROR(no curses library found) LIBS="-l$cf_curs_lib $cf_save_LIBS" if test "$cf_term_lib" = unknown ; then AC_MSG_CHECKING(if we can link with $cf_curs_lib library) AC_TRY_LINK([#include <${cf_cv_ncurses_header-curses.h}>], [initscr()], [cf_result=yes], [cf_result=no]) AC_MSG_RESULT($cf_result) test $cf_result = no && AC_ERROR(Cannot link curses library) elif test "$cf_term_lib" != predefined ; then AC_MSG_CHECKING(if we need both $cf_curs_lib and $cf_term_lib libraries) AC_TRY_LINK([#include <${cf_cv_ncurses_header-curses.h}>], [initscr(); tgoto((char *)0, 0, 0);], [cf_result=no], [ LIBS="-l$cf_curs_lib -l$cf_term_lib $cf_save_LIBS" AC_TRY_LINK([#include <${cf_cv_ncurses_header-curses.h}>], [initscr()], [cf_result=yes], [cf_result=error]) ]) AC_MSG_RESULT($cf_result) fi fi ])]) dnl @synopsis AC_LIB_READLINE dnl dnl Searches for a readline compatible library. If found, defines dnl `HAVE_LIBREADLINE'. If the found library has the `add_history' dnl function, sets also `HAVE_READLINE_HISTORY'. Also checks for the dnl locations of the necessary include files and sets `HAVE_READLINE_H' dnl or `HAVE_READLINE_READLINE_H' and `HAVE_READLINE_HISTORY_H' or dnl 'HAVE_HISTORY_H' if the corresponding include files exists. dnl dnl The libraries that may be readline compatible are `libedit', dnl `libeditline' and `libreadline'. Sometimes we need to link a termcap dnl library for readline to work, this macro tests these cases too by dnl trying to link with `libtermcap', `libcurses' or `libncurses' before dnl giving up. dnl dnl Here is an example of how to use the information provided by this dnl macro to perform the necessary includes or declarations in a C file: dnl dnl #include dnl dnl #ifdef HAVE_LIBREADLINE dnl #if defined(HAVE_READLINE_READLINE_H) dnl #include dnl #elif defined(HAVE_READLINE_H) dnl #include dnl #else /* !defined(HAVE_READLINE_H) */ dnl extern char *readline (); dnl #endif /* !defined(HAVE_READLINE_H) */ dnl char *cmdline = NULL; dnl #else /* !defined(HAVE_READLINE_READLINE_H) */ dnl /* no readline */ dnl #endif /* HAVE_LIBREADLINE */ dnl dnl #ifdef HAVE_READLINE_HISTORY dnl #if defined(HAVE_READLINE_HISTORY_H) dnl #include dnl #elif defined(HAVE_HISTORY_H) dnl #include dnl #else /* !defined(HAVE_HISTORY_H) */ dnl extern void add_history (); dnl extern int write_history (); dnl extern int read_history (); dnl #endif /* defined(HAVE_READLINE_HISTORY_H) */ dnl /* no history */ dnl #endif /* HAVE_READLINE_HISTORY */ dnl dnl dnl @version $Id: acinclude.m4,v 1.3 2002/03/11 10:29:28 jheinonen Exp $ dnl @author Ville Laurikari dnl AC_DEFUN([AC_LIB_READLINE], [ AC_CACHE_CHECK([for a readline compatible library], ac_cv_lib_readline, [ ORIG_LIBS="$LIBS" for readline_lib in readline edit editline; do for termcap_lib in "" termcap curses ncurses; do if test -z "$termcap_lib"; then TRY_LIB="-l$readline_lib" else TRY_LIB="-l$readline_lib -l$termcap_lib" fi LIBS="$ORIG_LIBS $TRY_LIB" AC_TRY_LINK_FUNC(readline, ac_cv_lib_readline="$TRY_LIB") if test -n "$ac_cv_lib_readline"; then break fi done if test -n "$ac_cv_lib_readline"; then break fi done if test -z "$ac_cv_lib_readline"; then ac_cv_lib_readline="no" fi LIBS="$ORIG_LIBS" ]) if test "$ac_cv_lib_readline" != "no"; then LIBS="$LIBS $ac_cv_lib_readline" AC_DEFINE(HAVE_LIBREADLINE, 1, [Define if you have a readline compatible library]) AC_CHECK_HEADERS(readline.h readline/readline.h) AC_CACHE_CHECK([whether readline supports history], ac_cv_lib_readline_history, [ ac_cv_lib_readline_history="no" AC_TRY_LINK_FUNC(add_history, ac_cv_lib_readline_history="yes") ]) if test "$ac_cv_lib_readline_history" = "yes"; then AC_DEFINE(HAVE_READLINE_HISTORY, 1, [Define if your readline library has \`add_history']) AC_CHECK_HEADERS(history.h readline/history.h) fi fi ]) abook-0.6.0pre2/configure.in000644 000764 000764 00000007776 10477226567 016525 0ustar00jaakkojaakko000000 000000 dnl abook configure.in AC_INIT(abook.c) AM_INIT_AUTOMAKE(abook, 0.6.0pre2) AM_CONFIG_HEADER(config.h) dnl --------------- dnl gettext support dnl --------------- AM_GNU_GETTEXT AM_GNU_GETTEXT_VERSION(0.14.1) AC_DEFUN([ABOOK_EXPAND_PREFIX], [ $1=$2 dnl expanding twice, since from autoconf 2.60 on, $datadir refers to dnl $datarootdir which in turn refers to $prefix $1=`( test "x$prefix" = xNONE && prefix="$ac_default_prefix" eval tmp_abook_prefix=\""[$]$1"\" eval echo $tmp_abook_prefix )` ]) ABOOK_EXPAND_PREFIX(abook_localedir, "$datadir/locale") localedir="\$(datadir)/locale" AC_ARG_WITH(localedir, [ --with-localedir=PATH Where the locale files are installed ]) if test "x$with_localedir" != "x"; then abook_localedir="$with_localedir" localedir="$with_localedir" fi AC_DEFINE_UNQUOTED(LOCALEDIR, "$abook_localedir", [locale directory]) AC_SUBST(localedir) AM_CONDITIONAL(USE_INCLUDED_INTL_H, test x$USE_INCLUDED_LIBINTL = xyes) dnl ---------------------- dnl end of gettext support dnl ---------------------- AC_PROG_CC AC_ISC_POSIX AM_C_PROTOTYPES if test "x$U" != "x"; then AC_MSG_ERROR(Compiler not ANSI compliant) fi AC_C_INLINE AC_PROG_INSTALL AC_HEADER_STDC AC_CHECK_HEADERS(unistd.h locale.h sys/ioctl.h iconv.h) AC_CHECK_HEADER(stdarg.h,AC_DEFINE(HAVE_STDARG_H, 1, [Define if you have the header file.]),AC_MSG_ERROR([*** stdarg.h is missing on your system ***])) AC_FUNC_STRCOLL AC_CHECK_FUNCS(setlocale) ac_widec_funcs=yes AC_CHECK_HEADER(wchar.h,[ ac_have_wchar_h=yes AC_DEFINE(HAVE_WCHAR_H, 1, [Define if you have the header file.])], [ac_have_wchar_h=no]) AC_CHECK_FUNCS(mbtowc wcwidth mbrtowc mbsinit,,ac_widec_funcs=no) AC_CHECK_DECLS(wcwidth) AC_CHECK_TYPE(wchar_t,,ac_widec_funcs=no) if test x$ac_widec_funcs = xyes -a x$ac_have_wchar_h = xyes; then ac_widec_possible=yes else ac_widec_possible=no fi dnl ------------------- dnl (n)curses detection dnl ------------------- abook_cv_curses=/usr AC_ARG_WITH(curses, [ --with-curses=DIR Where ncurses is installed ], [if test $withval != yes; then abook_cv_curses=$withval fi if test x$abook_cv_curses != x/usr; then LDFLAGS="-L${abook_cv_curses}/lib $LDFLAGS" CPPFLAGS="$CPPFLAGS -I${abook_cv_curses}/include" fi]) AC_CHECK_LIB(ncursesw, initscr, [LIBS="$LIBS -lncursesw" if test x$abook_cv_curses = x/usr -a -d /usr/include/ncursesw; then CPPFLAGS="$CPPFLAGS -I/usr/include/ncursesw" fi AC_CHECK_HEADERS(ncurses.h)],[ ac_widec_possible=no AC_CHECK_LIB(ncurses, initscr, [LIBS="$LIBS -lncurses" if test x$abook_cv_curses = x/usr -a -d /usr/include/ncurses; then CPPFLAGS="$CPPFLAGS -I/usr/include/ncurses" fi AC_CHECK_HEADERS(ncurses.h)], [CF_CURSES_LIBS]) ]) dnl -------------------------- dnl end of (n)curses detection dnl -------------------------- dnl ------------------ dnl readline detection dnl ------------------ abook_cv_readline=/usr AC_ARG_WITH(readline, [ --with-readline=DIR Where readline is installed ], [if test $withval != yes; then abook_cv_readline=$withval fi if test x$abook_cv_readline != x/usr; then LDFLAGS="-L${abook_cv_readline}/lib $LDFLAGS" CPPFLAGS="$CPPFLAGS -I${abook_cv_readline}/include" fi]) AC_LIB_READLINE if test x$ac_cv_lib_readline = xno -o x$ac_cv_lib_readline_history = xno; then AC_MSG_ERROR([*** readline library not found or it doesn't support history ***]) fi dnl ------------------------- dnl end of readline detection dnl ------------------------- if test x$ac_widec_possible = xyes; then AC_DEFINE(HANDLE_MULTIBYTE, 1, [Handle multibyte characters]) fi AC_CHECK_FUNCS(resizeterm) AC_CHECK_FUNCS(snprintf vsnprintf) AC_ARG_ENABLE(debug, [ --enable-debug Enable debugging support ], [case "${enableval}" in yes) debug=true ;; no) debug=false ;; *) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;; esac], [debug=false]) if test x$debug = xtrue; then CPPFLAGS="-DDEBUG=1 $CPPFLAGS" CFLAGS="-g $CFLAGS" fi if test x$GCC = xyes; then CFLAGS="-Wall $CFLAGS" fi AC_OUTPUT(Makefile abook.spec intl/Makefile po/Makefile.in) abook-0.6.0pre2/aclocal.m4000644 000764 000764 00000120744 10477231425 016030 0ustar00jaakkojaakko000000 000000 # generated automatically by aclocal 1.9.3 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # -*- Autoconf -*- # Copyright (C) 2002, 2003 Free Software Foundation, Inc. # Generated from amversion.in; do not edit by hand. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.3])]) # AM_AUX_DIR_EXPAND # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 6 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. #serial 2 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 7 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 11 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # -*- Autoconf -*- # Copyright (C) 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 1 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 2 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # Copyright (C) 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. # # We cannot accept any implementation of `mkdir' that recognizes `-p'. # Some implementations (such as Solaris 8's) are not thread-safe: if a # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' # concurrently, both version can detect that a/ is missing, but only # one can create it and the other will error out. Consequently we # restrict ourselves to GNU make (using the --version option ensures # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 2 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1996, 1997, 1998, 2000, 2001, 2002, 2003 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 AC_DEFUN([AM_C_PROTOTYPES], [AC_REQUIRE([AC_C_PROTOTYPES]) if test "$ac_cv_prog_cc_stdc" != no; then U= ANSI2KNR= else U=_ ANSI2KNR=./ansi2knr fi # Ensure some checks needed by ansi2knr itself. AC_REQUIRE([AC_HEADER_STDC]) AC_CHECK_HEADERS(string.h) AC_SUBST(U)dnl AC_SUBST(ANSI2KNR)dnl ]) AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES]) # # Check to make sure that the build environment is sane. # # Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # AM_PROG_INSTALL_STRIP # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 1 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/codeset.m4]) m4_include([m4/gettext.m4]) m4_include([m4/glibc2.m4]) m4_include([m4/glibc21.m4]) m4_include([m4/iconv.m4]) m4_include([m4/intdiv0.m4]) m4_include([m4/intmax.m4]) m4_include([m4/inttypes-pri.m4]) m4_include([m4/inttypes.m4]) m4_include([m4/inttypes_h.m4]) m4_include([m4/lcmessage.m4]) m4_include([m4/lib-ld.m4]) m4_include([m4/lib-link.m4]) m4_include([m4/lib-prefix.m4]) m4_include([m4/longdouble.m4]) m4_include([m4/longlong.m4]) m4_include([m4/nls.m4]) m4_include([m4/po.m4]) m4_include([m4/printf-posix.m4]) m4_include([m4/progtest.m4]) m4_include([m4/signed.m4]) m4_include([m4/size_max.m4]) m4_include([m4/stdint_h.m4]) m4_include([m4/uintmax_t.m4]) m4_include([m4/ulonglong.m4]) m4_include([m4/wchar_t.m4]) m4_include([m4/wint_t.m4]) m4_include([m4/xsize.m4]) m4_include([acinclude.m4]) abook-0.6.0pre2/Makefile.am000644 000764 000764 00000001705 10477226547 016230 0ustar00jaakkojaakko000000 000000 bin_PROGRAMS = abook abook_SOURCES = abook.c abook_rl.c database.c edit.c \ filter.c getname.c getopt.c getopt1.c gettext.c \ ldif.c list.c mbswidth.c misc.c options.c \ ui.c views.c xmalloc.c \ \ abook.h abook_curses.h abook_rl.h database.h edit.h \ filter.h getname.h getopt.h gettext.h \ help.h list.h ldif.h mbswidth.h misc.h options.h \ ui.h views.h xmalloc.h EXTRA_DIST = config.rpath ANNOUNCE BUGS FAQ abook.1 abookrc.5 sample.abookrc \ abook.spec contrib doc/HOWTO.translating_abook RELEASE_NOTES abook_LDADD = @LIBINTL@ install-data-local: $(mkinstalldirs) $(DESTDIR)$(mandir)/man1 $(DESTDIR)$(mandir)/man5 $(INSTALL_DATA) $(srcdir)/abook.1 $(DESTDIR)$(mandir)/man1/ $(INSTALL_DATA) $(srcdir)/abookrc.5 $(DESTDIR)$(mandir)/man5/ uninstall-local: -rm -f $(DESTDIR)$(mandir)/man1/abook.1 -rm -f $(DESTDIR)$(mandir)/man5/abookrc.5 SUBDIRS = intl po ACLOCAL_AMFLAGS = -I m4 if USE_INCLUDED_INTL_H AM_CPPFLAGS = -Iintl endif abook-0.6.0pre2/Makefile.in000644 000764 000764 00000062422 10477231430 016227 0ustar00jaakkojaakko000000 000000 # Makefile.in generated by automake 1.9.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ SOURCES = $(abook_SOURCES) srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = abook$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/abook.spec.in \ $(srcdir)/config.h.in $(top_srcdir)/configure \ $(top_srcdir)/intl/Makefile.in ABOUT-NLS AUTHORS COPYING \ ChangeLog INSTALL NEWS THANKS TODO config.guess config.rpath \ config.sub depcomp install-sh missing mkinstalldirs subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc2.m4 \ $(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/intdiv0.m4 $(top_srcdir)/m4/intmax.m4 \ $(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \ $(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/lcmessage.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/longdouble.m4 \ $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/printf-posix.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/signed.m4 \ $(top_srcdir)/m4/size_max.m4 $(top_srcdir)/m4/stdint_h.m4 \ $(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/ulonglong.m4 \ $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wint_t.m4 \ $(top_srcdir)/m4/xsize.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = abook.spec intl/Makefile am__installdirs = "$(DESTDIR)$(bindir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_abook_OBJECTS = abook.$(OBJEXT) abook_rl.$(OBJEXT) \ database.$(OBJEXT) edit.$(OBJEXT) filter.$(OBJEXT) \ getname.$(OBJEXT) getopt.$(OBJEXT) getopt1.$(OBJEXT) \ gettext.$(OBJEXT) ldif.$(OBJEXT) list.$(OBJEXT) \ mbswidth.$(OBJEXT) misc.$(OBJEXT) options.$(OBJEXT) \ ui.$(OBJEXT) views.$(OBJEXT) xmalloc.$(OBJEXT) abook_OBJECTS = $(am_abook_OBJECTS) abook_DEPENDENCIES = DEFAULT_INCLUDES = -I. -I$(srcdir) -I. depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(abook_SOURCES) DIST_SOURCES = $(abook_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GENCAT = @GENCAT@ GLIBC2 = @GLIBC2@ GLIBC21 = @GLIBC21@ GMSGFMT = @GMSGFMT@ HAVE_ASPRINTF = @HAVE_ASPRINTF@ HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@ HAVE_SNPRINTF = @HAVE_SNPRINTF@ HAVE_WPRINTF = @HAVE_WPRINTF@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLBISON = @INTLBISON@ INTLLIBS = @INTLLIBS@ INTLOBJS = @INTLOBJS@ INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ U = @U@ USE_INCLUDED_INTL_H_FALSE = @USE_INCLUDED_INTL_H_FALSE@ USE_INCLUDED_INTL_H_TRUE = @USE_INCLUDED_INTL_H_TRUE@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ ac_ct_CC = @ac_ct_CC@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ abook_SOURCES = abook.c abook_rl.c database.c edit.c \ filter.c getname.c getopt.c getopt1.c gettext.c \ ldif.c list.c mbswidth.c misc.c options.c \ ui.c views.c xmalloc.c \ \ abook.h abook_curses.h abook_rl.h database.h edit.h \ filter.h getname.h getopt.h gettext.h \ help.h list.h ldif.h mbswidth.h misc.h options.h \ ui.h views.h xmalloc.h EXTRA_DIST = config.rpath ANNOUNCE BUGS FAQ abook.1 abookrc.5 sample.abookrc \ abook.spec contrib doc/HOWTO.translating_abook RELEASE_NOTES abook_LDADD = @LIBINTL@ SUBDIRS = intl po ACLOCAL_AMFLAGS = -I m4 @USE_INCLUDED_INTL_H_TRUE@AM_CPPFLAGS = -Iintl all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .o .obj am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 abook.spec: $(top_builddir)/config.status $(srcdir)/abook.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) abook$(EXEEXT): $(abook_OBJECTS) $(abook_DEPENDENCIES) @rm -f abook$(EXEEXT) $(LINK) $(abook_LDFLAGS) $(abook_OBJECTS) $(abook_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/abook.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/abook_rl.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/database.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/edit.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filter.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getname.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gettext.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ldif.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mbswidth.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ui.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/views.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmalloc.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/. $(distdir)/doc $(distdir)/intl $(distdir)/m4 $(distdir)/po @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ --with-included-gettext \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-data-local install-exec-am: install-binPROGRAMS install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-local uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-binPROGRAMS clean-generic clean-recursive \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-compile distclean-generic distclean-hdr \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-binPROGRAMS install-data \ install-data-am install-data-local install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-binPROGRAMS uninstall-info-am uninstall-local install-data-local: $(mkinstalldirs) $(DESTDIR)$(mandir)/man1 $(DESTDIR)$(mandir)/man5 $(INSTALL_DATA) $(srcdir)/abook.1 $(DESTDIR)$(mandir)/man1/ $(INSTALL_DATA) $(srcdir)/abookrc.5 $(DESTDIR)$(mandir)/man5/ uninstall-local: -rm -f $(DESTDIR)$(mandir)/man1/abook.1 -rm -f $(DESTDIR)$(mandir)/man5/abookrc.5 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: abook-0.6.0pre2/abook.spec.in000644 000764 000764 00000001645 10315500220 016521 0ustar00jaakkojaakko000000 000000 Summary: Text-based addressbook program Name: @PACKAGE@ Version: @VERSION@ Release: 1 License: GPL Group: Utilities Source: http://prdownloads.sourceforge.net/abook/%{name}-%{version}.tar.gz URL: http://abook.sourceforge.net/ BuildPreReq: ncurses-devel readline-devel gettext BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root %description Abook is a text-based addressbook program designed to use with mutt mail client. %prep %setup -q %build %configure make %{_smp_mflags} %install %makeinstall %find_lang %{name} %clean rm -rf -- "%{buildroot}" %files -f %{name}.lang %defattr(-,root,root) %doc AUTHORS BUGS COPYING ChangeLog FAQ NEWS README THANKS TODO sample.abookrc %{_bindir}/abook %{_mandir}/man1/abook.* %{_mandir}/man5/abookrc.* %changelog * Mon Mar 11 2002 Jaakko Heinonen - rewrote the spec file originally written by Gustavo Niemeyer abook-0.6.0pre2/config.h.in000644 000764 000764 00000023513 10477231444 016210 0ustar00jaakkojaakko000000 000000 /* config.h.in. Generated from configure.in by autoheader. */ /* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP systems. This function is required for `alloca.c' support on those systems. */ #undef CRAY_STACKSEG_END /* Define to 1 if using `alloca.c'. */ #undef C_ALLOCA /* Define to 1 if translation of program messages to the user's native language is requested. */ #undef ENABLE_NLS /* Handle multibyte characters */ #undef HANDLE_MULTIBYTE /* Define to 1 if you have `alloca', as a function or macro. */ #undef HAVE_ALLOCA /* Define to 1 if you have and it should be used (not on Ultrix). */ #undef HAVE_ALLOCA_H /* Define to 1 if you have the header file. */ #undef HAVE_ARGZ_H /* Define to 1 if you have the `asprintf' function. */ #undef HAVE_ASPRINTF /* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework. */ #undef HAVE_CFLOCALECOPYCURRENT /* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework. */ #undef HAVE_CFPREFERENCESCOPYAPPVALUE /* Define if the GNU dcgettext() function is already present or preinstalled. */ #undef HAVE_DCGETTEXT /* Define to 1 if you have the declaration of `feof_unlocked', and to 0 if you don't. */ #undef HAVE_DECL_FEOF_UNLOCKED /* Define to 1 if you have the declaration of `fgets_unlocked', and to 0 if you don't. */ #undef HAVE_DECL_FGETS_UNLOCKED /* Define to 1 if you have the declaration of `getc_unlocked', and to 0 if you don't. */ #undef HAVE_DECL_GETC_UNLOCKED /* Define to 1 if you have the declaration of `wcwidth', and to 0 if you don't. */ #undef HAVE_DECL_WCWIDTH /* Define to 1 if you have the declaration of `_snprintf', and to 0 if you don't. */ #undef HAVE_DECL__SNPRINTF /* Define to 1 if you have the declaration of `_snwprintf', and to 0 if you don't. */ #undef HAVE_DECL__SNWPRINTF /* Define to 1 if you have the `fwprintf' function. */ #undef HAVE_FWPRINTF /* Define to 1 if you have the `getcwd' function. */ #undef HAVE_GETCWD /* Define to 1 if you have the `getegid' function. */ #undef HAVE_GETEGID /* Define to 1 if you have the `geteuid' function. */ #undef HAVE_GETEUID /* Define to 1 if you have the `getgid' function. */ #undef HAVE_GETGID /* Define to 1 if you have the `getpagesize' function. */ #undef HAVE_GETPAGESIZE /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT /* Define to 1 if you have the `getuid' function. */ #undef HAVE_GETUID /* Define to 1 if you have the header file. */ #undef HAVE_HISTORY_H /* Define if you have the iconv() function. */ #undef HAVE_ICONV /* Define to 1 if you have the header file. */ #undef HAVE_ICONV_H /* Define if you have the 'intmax_t' type in or . */ #undef HAVE_INTMAX_T /* Define if exists and doesn't clash with . */ #undef HAVE_INTTYPES_H /* Define if exists, doesn't clash with , and declares uintmax_t. */ #undef HAVE_INTTYPES_H_WITH_UINTMAX /* Define if you have and nl_langinfo(CODESET). */ #undef HAVE_LANGINFO_CODESET /* Define if your file defines LC_MESSAGES. */ #undef HAVE_LC_MESSAGES /* Define if you have a readline compatible library */ #undef HAVE_LIBREADLINE /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS_H /* Define to 1 if you have the header file. */ #undef HAVE_LOCALE_H /* Define if you have the 'long double' type. */ #undef HAVE_LONG_DOUBLE /* Define if you have the 'long long' type. */ #undef HAVE_LONG_LONG /* Define to 1 if you have the header file. */ #undef HAVE_MALLOC_H /* Define to 1 if you have the `mbrtowc' function. */ #undef HAVE_MBRTOWC /* Define to 1 if you have the `mbsinit' function. */ #undef HAVE_MBSINIT /* Define to 1 if you have the `mbtowc' function. */ #undef HAVE_MBTOWC /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `mempcpy' function. */ #undef HAVE_MEMPCPY /* Define to 1 if you have a working `mmap' system call. */ #undef HAVE_MMAP /* Define to 1 if you have the `munmap' function. */ #undef HAVE_MUNMAP /* Define to 1 if you have the header file. */ #undef HAVE_NCURSES_H /* Define to 1 if you have the header file. */ #undef HAVE_NL_TYPES_H /* Define if your printf() function supports format strings with positions. */ #undef HAVE_POSIX_PRINTF /* Define to 1 if you have the `putenv' function. */ #undef HAVE_PUTENV /* Define to 1 if you have the header file. */ #undef HAVE_READLINE_H /* Define if your readline library has \`add_history' */ #undef HAVE_READLINE_HISTORY /* Define to 1 if you have the header file. */ #undef HAVE_READLINE_HISTORY_H /* Define to 1 if you have the header file. */ #undef HAVE_READLINE_READLINE_H /* Define to 1 if you have the `resizeterm' function. */ #undef HAVE_RESIZETERM /* Define to 1 if you have the `setenv' function. */ #undef HAVE_SETENV /* Define to 1 if you have the `setlocale' function. */ #undef HAVE_SETLOCALE /* Define to 1 if you have the `snprintf' function. */ #undef HAVE_SNPRINTF /* Define if you have the header file. */ #undef HAVE_STDARG_H /* Define to 1 if you have the header file. */ #undef HAVE_STDDEF_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define if exists, doesn't clash with , and declares uintmax_t. */ #undef HAVE_STDINT_H_WITH_UINTMAX /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `stpcpy' function. */ #undef HAVE_STPCPY /* Define to 1 if you have the `strcasecmp' function. */ #undef HAVE_STRCASECMP /* Define to 1 if you have the `strcoll' function and it is properly defined. */ #undef HAVE_STRCOLL /* Define to 1 if you have the `strdup' function. */ #undef HAVE_STRDUP /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strtoul' function. */ #undef HAVE_STRTOUL /* Define to 1 if you have the header file. */ #undef HAVE_SYS_IOCTL_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the `tsearch' function. */ #undef HAVE_TSEARCH /* Define if you have the 'uintmax_t' type in or . */ #undef HAVE_UINTMAX_T /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define if you have the 'unsigned long long' type. */ #undef HAVE_UNSIGNED_LONG_LONG /* Define to 1 if you have the `vsnprintf' function. */ #undef HAVE_VSNPRINTF /* Define if you have the header file. */ #undef HAVE_WCHAR_H /* Define if you have the 'wchar_t' type. */ #undef HAVE_WCHAR_T /* Define to 1 if you have the `wcslen' function. */ #undef HAVE_WCSLEN /* Define to 1 if you have the `wcwidth' function. */ #undef HAVE_WCWIDTH /* Define if you have the 'wint_t' type. */ #undef HAVE_WINT_T /* Define to 1 if you have the `__argz_count' function. */ #undef HAVE___ARGZ_COUNT /* Define to 1 if you have the `__argz_next' function. */ #undef HAVE___ARGZ_NEXT /* Define to 1 if you have the `__argz_stringify' function. */ #undef HAVE___ARGZ_STRINGIFY /* Define to 1 if you have the `__fsetlocking' function. */ #undef HAVE___FSETLOCKING /* Define as const if the declaration of iconv() needs const. */ #undef ICONV_CONST /* Define if integer division by zero raises signal SIGFPE. */ #undef INTDIV0_RAISES_SIGFPE /* locale directory */ #undef LOCALEDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define if exists and defines unusable PRI* macros. */ #undef PRI_MACROS_BROKEN /* Define to 1 if the C compiler supports function prototypes. */ #undef PROTOTYPES /* Define as the maximum value of type 'size_t', if the system doesn't define it. */ #undef SIZE_MAX /* If using the C implementation of alloca, define if you know the direction of stack growth for your system; otherwise it will be automatically deduced at run-time. STACK_DIRECTION > 0 => grows toward higher addresses STACK_DIRECTION < 0 => grows toward lower addresses STACK_DIRECTION = 0 => direction of growth unknown */ #undef STACK_DIRECTION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* Define like PROTOTYPES; this can be used by system headers. */ #undef __PROTOTYPES /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to `__inline__' or `__inline' if that's what the C compiler calls it, or to nothing if 'inline' is not supported under any name. */ #ifndef __cplusplus #undef inline #endif /* Define to `long' if does not define. */ #undef off_t /* Define as the type of the result of subtracting two pointers, if the system doesn't define it. */ #undef ptrdiff_t /* Define to empty if the C compiler doesn't support this keyword. */ #undef signed /* Define to `unsigned' if does not define. */ #undef size_t /* Define to unsigned long or unsigned long long if and don't define. */ #undef uintmax_t abook-0.6.0pre2/configure000744 000764 000764 00001631530 10477231430 016072 0ustar00jaakkojaakko000000 000000 #! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.59. # # Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` exec 6>&1 # # Initializations. # ac_default_prefix=/usr/local ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. # This variable seems obsolete. It should probably be removed, and # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME= PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= ac_unique_file="abook.c" # Factoring default headers for most tests. ac_includes_default="\ #include #if HAVE_SYS_TYPES_H # include #endif #if HAVE_SYS_STAT_H # include #endif #if STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #if HAVE_STRING_H # if !STDC_HEADERS && HAVE_MEMORY_H # include # endif # include #endif #if HAVE_STRINGS_H # include #endif #if HAVE_INTTYPES_H # include #else # if HAVE_STDINT_H # include # endif #endif #if HAVE_UNISTD_H # include #endif" ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar MKINSTALLDIRS USE_NLS MSGFMT GMSGFMT XGETTEXT MSGMERGE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPP EGREP GLIBC2 RANLIB ac_ct_RANLIB ALLOCA GLIBC21 INTL_MACOSX_LIBS HAVE_POSIX_PRINTF HAVE_ASPRINTF HAVE_SNPRINTF HAVE_WPRINTF LIBICONV LTLIBICONV INTLBISON BUILD_INCLUDED_LIBINTL USE_INCLUDED_LIBINTL CATOBJEXT DATADIRNAME INSTOBJEXT GENCAT INTLOBJS INTL_LIBTOOL_SUFFIX_PREFIX INTLLIBS LIBINTL LTLIBINTL POSUB localedir USE_INCLUDED_INTL_H_TRUE USE_INCLUDED_INTL_H_FALSE U ANSI2KNR LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/-/_/g'` eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` eval "$ac_envvar='$ac_optarg'" export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute paths. for ac_var in exec_prefix prefix do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias ac_cv_env_build_alias_set=${build_alias+set} ac_cv_env_build_alias_value=$build_alias ac_env_host_alias_set=${host_alias+set} ac_env_host_alias_value=$host_alias ac_cv_env_host_alias_set=${host_alias+set} ac_cv_env_host_alias_value=$host_alias ac_env_target_alias_set=${target_alias+set} ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias ac_env_CC_set=${CC+set} ac_env_CC_value=$CC ac_cv_env_CC_set=${CC+set} ac_cv_env_CC_value=$CC ac_env_CFLAGS_set=${CFLAGS+set} ac_env_CFLAGS_value=$CFLAGS ac_cv_env_CFLAGS_set=${CFLAGS+set} ac_cv_env_CFLAGS_value=$CFLAGS ac_env_LDFLAGS_set=${LDFLAGS+set} ac_env_LDFLAGS_value=$LDFLAGS ac_cv_env_LDFLAGS_set=${LDFLAGS+set} ac_cv_env_LDFLAGS_value=$LDFLAGS ac_env_CPPFLAGS_set=${CPPFLAGS+set} ac_env_CPPFLAGS_value=$CPPFLAGS ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} ac_cv_env_CPPFLAGS_value=$CPPFLAGS ac_env_CPP_set=${CPP+set} ac_env_CPP_value=$CPP ac_cv_env_CPP_set=${CPP+set} ac_cv_env_CPP_value=$CPP # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-nls do not use Native Language Support --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --disable-rpath do not hardcode runtime library paths --enable-debug Enable debugging support Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-gnu-ld assume the C compiler uses GNU ld default=no --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib --without-libiconv-prefix don't search for libiconv in includedir and libdir --with-included-gettext use the GNU gettext library included here --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib --without-libintl-prefix don't search for libintl in includedir and libdir --with-localedir=PATH Where the locale files are installed --with-curses=DIR Where ncurses is installed --with-readline=DIR Where readline is installed Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d $ac_dir || continue ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. if test -f $ac_srcdir/configure.gnu; then echo $SHELL $ac_srcdir/configure.gnu --help=recursive elif test -f $ac_srcdir/configure; then echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd $ac_popdir done fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF Copyright (C) 2003 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit 0 fi exec 5>config.log cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ _ACEOF { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` hostinfo = `(hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" # Get rid of the leading space. ac_sep=" " ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Be sure not to use single quotes in there, as some shells, # such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, { (set) 2>&1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------- ## ## Output files. ## ## ------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; *) . ./$cache_file;; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f $ac_dir/shtool; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} { (exit 1); exit 1; }; } fi ac_config_guess="$SHELL $ac_aux_dir/config.guess" ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && program_transform_name="s,^,$program_prefix,;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$,$program_suffix,;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$AWK" && break done echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 SET_MAKE= else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=abook VERSION=0.6.0pre2 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi STRIP=$ac_ct_STRIP else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_config_headers="$ac_config_headers config.h" MKINSTALLDIRS= if test -n "$ac_aux_dir"; then case "$ac_aux_dir" in /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; esac fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi echo "$as_me:$LINENO: checking whether NLS is requested" >&5 echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" USE_NLS=$enableval else USE_NLS=yes fi; echo "$as_me:$LINENO: result: $USE_NLS" >&5 echo "${ECHO_T}$USE_NLS" >&6 # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_MSGFMT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$MSGFMT" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != ":"; then echo "$as_me:$LINENO: result: $MSGFMT" >&5 echo "${ECHO_T}$MSGFMT" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_GMSGFMT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then echo "$as_me:$LINENO: result: $GMSGFMT" >&5 echo "${ECHO_T}$GMSGFMT" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_XGETTEXT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$XGETTEXT" in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then echo "$as_me:$LINENO: result: $XGETTEXT" >&5 echo "${ECHO_T}$XGETTEXT" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi rm -f messages.po # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_MSGMERGE+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$MSGMERGE" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" ;; esac fi MSGMERGE="$ac_cv_path_MSGMERGE" if test "$MSGMERGE" != ":"; then echo "$as_me:$LINENO: result: $MSGMERGE" >&5 echo "${ECHO_T}$MSGMERGE" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi if test "$GMSGFMT" != ":"; then if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then : ; else GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` echo "$as_me:$LINENO: result: found $GMSGFMT program is not GNU msgfmt; ignore it" >&5 echo "${ECHO_T}found $GMSGFMT program is not GNU msgfmt; ignore it" >&6 GMSGFMT=":" fi fi if test "$XGETTEXT" != ":"; then if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then : ; else echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6 XGETTEXT=":" fi rm -f messages.po fi ac_config_commands="$ac_config_commands default-1" DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi echo "$as_me:$LINENO: result: $_am_result" >&5 echo "${ECHO_T}$_am_result" >&6 rm -f confinc confmf # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval="$enable_dependency_tracking" fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$ac_ct_CC" && break done CC=$ac_ct_CC fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO:" \ "checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 (eval $ac_compiler -V &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Find the output, starting from the most likely. This scheme is # not robust to junk in `.', hence go to wildcards (a.*) only as a last # resort. # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= # b.out is created by i960 compilers. for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; conftest.$ac_ext ) # This is the source file. ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` # FIXME: I believe we export ac_cv_exeext for Libtool, # but it would be cool to find out if it's true. Does anybody # maintain Libtool? --akim. export ac_cv_exeext break;; * ) break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6 # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6 echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6 rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6 OBJEXT=$ac_cv_objext ac_objext=$OBJEXT echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS CFLAGS="-g" echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 if test "${ac_cv_prog_cc_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_stdc=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std1 is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std1. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF # Don't try gcc -ansi; that turns off useful extensions and # breaks some systems' header files. # AIX -qlanglvl=ansi # Ultrix and OSF/1 -std1 # HP-UX 10.20 and later -Ae # HP-UX older versions -Aa -D_HPUX_SOURCE # SVR4 -Xc -D__EXTENSIONS__ for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_stdc=$ac_arg break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext done rm -f conftest.$ac_ext conftest.$ac_objext CC=$ac_save_CC fi case "x$ac_cv_prog_cc_stdc" in x|xno) echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6 ;; *) echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 CC="$CC $ac_cv_prog_cc_stdc" ;; esac # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide # the declaration of exit, since it's the most demanding environment. cat >conftest.$ac_ext <<_ACEOF #ifndef __cplusplus choke me #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ 'extern "C" void exit (int);' \ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration #include int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 continue fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then echo '#ifdef __cplusplus' >>confdefs.h echo $ac_declaration >>confdefs.h echo '#endif' >>confdefs.h fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # Make sure we can run config.sub. $ac_config_sub sun4 >/dev/null 2>&1 || { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 echo "$as_me: error: cannot run $ac_config_sub" >&2;} { (exit 1); exit 1; }; } echo "$as_me:$LINENO: checking build system type" >&5 echo $ECHO_N "checking build system type... $ECHO_C" >&6 if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_build_alias=$build_alias test -z "$ac_cv_build_alias" && ac_cv_build_alias=`$ac_config_guess` test -z "$ac_cv_build_alias" && { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: $ac_cv_build" >&5 echo "${ECHO_T}$ac_cv_build" >&6 build=$ac_cv_build build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$as_me:$LINENO: checking host system type" >&5 echo $ECHO_N "checking host system type... $ECHO_C" >&6 if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_host_alias=$host_alias test -z "$ac_cv_host_alias" && ac_cv_host_alias=$ac_cv_build_alias ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: $ac_cv_host" >&5 echo "${ECHO_T}$ac_cv_host" >&6 host=$ac_cv_host host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi echo "$as_me:$LINENO: result: $CPP" >&5 echo "${ECHO_T}$CPP" >&6 ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking for egrep" >&5 echo $ECHO_N "checking for egrep... $ECHO_C" >&6 if test "${ac_cv_prog_egrep+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if echo a | (grep -E '(a|b)') >/dev/null 2>&1 then ac_cv_prog_egrep='grep -E' else ac_cv_prog_egrep='egrep' fi fi echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 echo "${ECHO_T}$ac_cv_prog_egrep" >&6 EGREP=$ac_cv_prog_egrep echo "$as_me:$LINENO: checking whether we are using the GNU C Library 2 or newer" >&5 echo $ECHO_N "checking whether we are using the GNU C Library 2 or newer... $ECHO_C" >&6 if test "${ac_cv_gnu_library_2+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifdef __GNU_LIBRARY__ #if (__GLIBC__ >= 2) Lucky GNU user #endif #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "Lucky GNU user" >/dev/null 2>&1; then ac_cv_gnu_library_2=yes else ac_cv_gnu_library_2=no fi rm -f conftest* fi echo "$as_me:$LINENO: result: $ac_cv_gnu_library_2" >&5 echo "${ECHO_T}$ac_cv_gnu_library_2" >&6 GLIBC2="$ac_cv_gnu_library_2" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then echo "$as_me:$LINENO: result: $RANLIB" >&5 echo "${ECHO_T}$RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 echo "${ECHO_T}$ac_ct_RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi RANLIB=$ac_ct_RANLIB else RANLIB="$ac_cv_prog_RANLIB" fi echo "$as_me:$LINENO: checking for library containing strerror" >&5 echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6 if test "${ac_cv_search_strerror+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS ac_cv_search_strerror=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strerror (); int main () { strerror (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_strerror="none required" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test "$ac_cv_search_strerror" = no; then for ac_lib in cposix; do LIBS="-l$ac_lib $ac_func_search_save_LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strerror (); int main () { strerror (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_strerror="-l$ac_lib" break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext done fi LIBS=$ac_func_search_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 echo "${ECHO_T}$ac_cv_search_strerror" >&6 if test "$ac_cv_search_strerror" != no; then test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS" fi echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 if test "${ac_cv_c_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset x; /* SunOS 4.1.1 cc rejects this. */ char const *const *ccp; char **p; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; ccp = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++ccp; p = (char**) ccp; ccp = (char const *const *) p; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; } #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_const=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_c_const=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 echo "${ECHO_T}$ac_cv_c_const" >&6 if test $ac_cv_c_const = no; then cat >>confdefs.h <<\_ACEOF #define const _ACEOF fi echo "$as_me:$LINENO: checking for signed" >&5 echo $ECHO_N "checking for signed... $ECHO_C" >&6 if test "${bh_cv_c_signed+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { signed char x; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then bh_cv_c_signed=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 bh_cv_c_signed=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $bh_cv_c_signed" >&5 echo "${ECHO_T}$bh_cv_c_signed" >&6 if test $bh_cv_c_signed = no; then cat >>confdefs.h <<\_ACEOF #define signed _ACEOF fi echo "$as_me:$LINENO: checking for inline" >&5 echo $ECHO_N "checking for inline... $ECHO_C" >&6 if test "${ac_cv_c_inline+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifndef __cplusplus typedef int foo_t; static $ac_kw foo_t static_foo () {return 0; } $ac_kw foo_t foo () {return 0; } #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_inline=$ac_kw; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done fi echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 echo "${ECHO_T}$ac_cv_c_inline" >&6 case $ac_cv_c_inline in inline | yes) ;; *) case $ac_cv_c_inline in no) ac_val=;; *) ac_val=$ac_cv_c_inline;; esac cat >>confdefs.h <<_ACEOF #ifndef __cplusplus #define inline $ac_val #endif _ACEOF ;; esac # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking for off_t" >&5 echo $ECHO_N "checking for off_t... $ECHO_C" >&6 if test "${ac_cv_type_off_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if ((off_t *) 0) return 0; if (sizeof (off_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_off_t=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_off_t=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 echo "${ECHO_T}$ac_cv_type_off_t" >&6 if test $ac_cv_type_off_t = yes; then : else cat >>confdefs.h <<_ACEOF #define off_t long _ACEOF fi echo "$as_me:$LINENO: checking for size_t" >&5 echo $ECHO_N "checking for size_t... $ECHO_C" >&6 if test "${ac_cv_type_size_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if ((size_t *) 0) return 0; if (sizeof (size_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_size_t=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_size_t=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 echo "${ECHO_T}$ac_cv_type_size_t" >&6 if test $ac_cv_type_size_t = yes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned _ACEOF fi echo "$as_me:$LINENO: checking for long long" >&5 echo $ECHO_N "checking for long long... $ECHO_C" >&6 if test "${ac_cv_type_long_long+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ long long ll = 1LL; int i = 63; int main () { long long llmax = (long long) -1; return ll << i | ll >> i | llmax / ll | llmax % ll; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_long_long=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_long_long=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5 echo "${ECHO_T}$ac_cv_type_long_long" >&6 if test $ac_cv_type_long_long = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_LONG_LONG 1 _ACEOF fi echo "$as_me:$LINENO: checking for long double" >&5 echo $ECHO_N "checking for long double... $ECHO_C" >&6 if test "${gt_cv_c_long_double+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$GCC" = yes; then gt_cv_c_long_double=yes else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* The Stardent Vistra knows sizeof(long double), but does not support it. */ long double foo = 0.0; /* On Ultrix 4.3 cc, long double is 4 and double is 8. */ int array [2*(sizeof(long double) >= sizeof(double)) - 1]; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_c_long_double=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_c_long_double=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $gt_cv_c_long_double" >&5 echo "${ECHO_T}$gt_cv_c_long_double" >&6 if test $gt_cv_c_long_double = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_LONG_DOUBLE 1 _ACEOF fi echo "$as_me:$LINENO: checking for wchar_t" >&5 echo $ECHO_N "checking for wchar_t... $ECHO_C" >&6 if test "${gt_cv_c_wchar_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include wchar_t foo = (wchar_t)'\0'; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_c_wchar_t=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_c_wchar_t=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gt_cv_c_wchar_t" >&5 echo "${ECHO_T}$gt_cv_c_wchar_t" >&6 if test $gt_cv_c_wchar_t = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_WCHAR_T 1 _ACEOF fi echo "$as_me:$LINENO: checking for wint_t" >&5 echo $ECHO_N "checking for wint_t... $ECHO_C" >&6 if test "${gt_cv_c_wint_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include wint_t foo = (wchar_t)'\0'; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_c_wint_t=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_c_wint_t=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gt_cv_c_wint_t" >&5 echo "${ECHO_T}$gt_cv_c_wint_t" >&6 if test $gt_cv_c_wint_t = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_WINT_T 1 _ACEOF fi echo "$as_me:$LINENO: checking for inttypes.h" >&5 echo $ECHO_N "checking for inttypes.h... $ECHO_C" >&6 if test "${gl_cv_header_inttypes_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { uintmax_t i = (uintmax_t) -1; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gl_cv_header_inttypes_h=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gl_cv_header_inttypes_h=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gl_cv_header_inttypes_h" >&5 echo "${ECHO_T}$gl_cv_header_inttypes_h" >&6 if test $gl_cv_header_inttypes_h = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_INTTYPES_H_WITH_UINTMAX 1 _ACEOF fi echo "$as_me:$LINENO: checking for stdint.h" >&5 echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6 if test "${gl_cv_header_stdint_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { uintmax_t i = (uintmax_t) -1; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gl_cv_header_stdint_h=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gl_cv_header_stdint_h=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gl_cv_header_stdint_h" >&5 echo "${ECHO_T}$gl_cv_header_stdint_h" >&6 if test $gl_cv_header_stdint_h = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_STDINT_H_WITH_UINTMAX 1 _ACEOF fi echo "$as_me:$LINENO: checking for intmax_t" >&5 echo $ECHO_N "checking for intmax_t... $ECHO_C" >&6 if test "${gt_cv_c_intmax_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if HAVE_STDINT_H_WITH_UINTMAX #include #endif #if HAVE_INTTYPES_H_WITH_UINTMAX #include #endif int main () { intmax_t x = -1; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_c_intmax_t=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_c_intmax_t=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gt_cv_c_intmax_t" >&5 echo "${ECHO_T}$gt_cv_c_intmax_t" >&6 if test $gt_cv_c_intmax_t = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_INTMAX_T 1 _ACEOF fi echo "$as_me:$LINENO: checking whether printf() supports POSIX/XSI format strings" >&5 echo $ECHO_N "checking whether printf() supports POSIX/XSI format strings... $ECHO_C" >&6 if test "${gt_cv_func_printf_posix+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined __NetBSD__ || defined _MSC_VER || defined __MINGW32__ || defined __CYGWIN__ notposix #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "notposix" >/dev/null 2>&1; then gt_cv_func_printf_posix="guessing no" else gt_cv_func_printf_posix="guessing yes" fi rm -f conftest* else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include /* The string "%2$d %1$d", with dollar characters protected from the shell's dollar expansion (possibly an autoconf bug). */ static char format[] = { '%', '2', '$', 'd', ' ', '%', '1', '$', 'd', '\0' }; static char buf[100]; int main () { sprintf (buf, format, 33, 55); return (strcmp (buf, "55 33") != 0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_func_printf_posix=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) gt_cv_func_printf_posix=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $gt_cv_func_printf_posix" >&5 echo "${ECHO_T}$gt_cv_func_printf_posix" >&6 case $gt_cv_func_printf_posix in *yes) cat >>confdefs.h <<\_ACEOF #define HAVE_POSIX_PRINTF 1 _ACEOF ;; esac # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo "$as_me:$LINENO: checking for working alloca.h" >&5 echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6 if test "${ac_cv_working_alloca_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { char *p = (char *) alloca (2 * sizeof (int)); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_working_alloca_h=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_working_alloca_h=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 echo "${ECHO_T}$ac_cv_working_alloca_h" >&6 if test $ac_cv_working_alloca_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA_H 1 _ACEOF fi echo "$as_me:$LINENO: checking for alloca" >&5 echo $ECHO_N "checking for alloca... $ECHO_C" >&6 if test "${ac_cv_func_alloca_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __GNUC__ # define alloca __builtin_alloca #else # ifdef _MSC_VER # include # define alloca _alloca # else # if HAVE_ALLOCA_H # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); # endif # endif # endif # endif #endif int main () { char *p = (char *) alloca (1); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_alloca_works=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_alloca_works=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 echo "${ECHO_T}$ac_cv_func_alloca_works" >&6 if test $ac_cv_func_alloca_works = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA 1 _ACEOF else # The SVR3 libPW and SVR4 libucb both contain incompatible functions # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. ALLOCA=alloca.$ac_objext cat >>confdefs.h <<\_ACEOF #define C_ALLOCA 1 _ACEOF echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6 if test "${ac_cv_os_cray+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined(CRAY) && ! defined(CRAY2) webecray #else wenotbecray #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "webecray" >/dev/null 2>&1; then ac_cv_os_cray=yes else ac_cv_os_cray=no fi rm -f conftest* fi echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 echo "${ECHO_T}$ac_cv_os_cray" >&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define CRAY_STACKSEG_END $ac_func _ACEOF break fi done fi echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6 if test "${ac_cv_c_stack_direction+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_c_stack_direction=0 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int find_stack_direction () { static char *addr = 0; auto char dummy; if (addr == 0) { addr = &dummy; return find_stack_direction (); } else return (&dummy > addr) ? 1 : -1; } int main () { exit (find_stack_direction () < 0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_stack_direction=1 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_c_stack_direction=-1 fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 echo "${ECHO_T}$ac_cv_c_stack_direction" >&6 cat >>confdefs.h <<_ACEOF #define STACK_DIRECTION $ac_cv_c_stack_direction _ACEOF fi for ac_header in stdlib.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in getpagesize do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking for working mmap" >&5 echo $ECHO_N "checking for working mmap... $ECHO_C" >&6 if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_func_mmap_fixed_mapped=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default /* malloc might have been renamed as rpl_malloc. */ #undef malloc /* Thanks to Mike Haertel and Jim Avera for this test. Here is a matrix of mmap possibilities: mmap private not fixed mmap private fixed at somewhere currently unmapped mmap private fixed at somewhere already mapped mmap shared not fixed mmap shared fixed at somewhere currently unmapped mmap shared fixed at somewhere already mapped For private mappings, we should verify that changes cannot be read() back from the file, nor mmap's back from the file at a different address. (There have been systems where private was not correctly implemented like the infamous i386 svr4.0, and systems where the VM page cache was not coherent with the file system buffer cache like early versions of FreeBSD and possibly contemporary NetBSD.) For shared mappings, we should conversely verify that changes get propagated back to all the places they're supposed to be. Grep wants private fixed already mapped. The main things grep needs to know about mmap are: * does it exist and is it safe to write into the mmap'd area * how to use it (BSD variants) */ #include #include #if !STDC_HEADERS && !HAVE_STDLIB_H char *malloc (); #endif /* This mess was copied from the GNU getpagesize.h. */ #if !HAVE_GETPAGESIZE /* Assume that all systems that can run configure have sys/param.h. */ # if !HAVE_SYS_PARAM_H # define HAVE_SYS_PARAM_H 1 # endif # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ # if HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE # else /* no EXEC_PAGESIZE */ # ifdef NBPG # define getpagesize() NBPG * CLSIZE # ifndef CLSIZE # define CLSIZE 1 # endif /* no CLSIZE */ # else /* no NBPG */ # ifdef NBPC # define getpagesize() NBPC # else /* no NBPC */ # ifdef PAGESIZE # define getpagesize() PAGESIZE # endif /* PAGESIZE */ # endif /* no NBPC */ # endif /* no NBPG */ # endif /* no EXEC_PAGESIZE */ # else /* no HAVE_SYS_PARAM_H */ # define getpagesize() 8192 /* punt totally */ # endif /* no HAVE_SYS_PARAM_H */ # endif /* no _SC_PAGESIZE */ #endif /* no HAVE_GETPAGESIZE */ int main () { char *data, *data2, *data3; int i, pagesize; int fd; pagesize = getpagesize (); /* First, make a file with some known garbage in it. */ data = (char *) malloc (pagesize); if (!data) exit (1); for (i = 0; i < pagesize; ++i) *(data + i) = rand (); umask (0); fd = creat ("conftest.mmap", 0600); if (fd < 0) exit (1); if (write (fd, data, pagesize) != pagesize) exit (1); close (fd); /* Next, try to mmap the file at a fixed address which already has something else allocated at it. If we can, also make sure that we see the same garbage. */ fd = open ("conftest.mmap", O_RDWR); if (fd < 0) exit (1); data2 = (char *) malloc (2 * pagesize); if (!data2) exit (1); data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1); if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED, fd, 0L)) exit (1); for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data2 + i)) exit (1); /* Finally, make sure that changes to the mapped area do not percolate back to the file as seen by read(). (This is a bug on some variants of i386 svr4.0.) */ for (i = 0; i < pagesize; ++i) *(data2 + i) = *(data2 + i) + 1; data3 = (char *) malloc (pagesize); if (!data3) exit (1); if (read (fd, data3, pagesize) != pagesize) exit (1); for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data3 + i)) exit (1); close (fd); exit (0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_mmap_fixed_mapped=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_mmap_fixed_mapped=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6 if test $ac_cv_func_mmap_fixed_mapped = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_MMAP 1 _ACEOF fi rm -f conftest.mmap echo "$as_me:$LINENO: checking whether we are using the GNU C Library 2.1 or newer" >&5 echo $ECHO_N "checking whether we are using the GNU C Library 2.1 or newer... $ECHO_C" >&6 if test "${ac_cv_gnu_library_2_1+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifdef __GNU_LIBRARY__ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) Lucky GNU user #endif #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "Lucky GNU user" >/dev/null 2>&1; then ac_cv_gnu_library_2_1=yes else ac_cv_gnu_library_2_1=no fi rm -f conftest* fi echo "$as_me:$LINENO: result: $ac_cv_gnu_library_2_1" >&5 echo "${ECHO_T}$ac_cv_gnu_library_2_1" >&6 GLIBC21="$ac_cv_gnu_library_2_1" echo "$as_me:$LINENO: checking whether integer division by zero raises SIGFPE" >&5 echo $ECHO_N "checking whether integer division by zero raises SIGFPE... $ECHO_C" >&6 if test "${gt_cv_int_divbyzero_sigfpe+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then # Guess based on the CPU. case "$host_cpu" in alpha* | i3456786 | m68k | s390*) gt_cv_int_divbyzero_sigfpe="guessing yes";; *) gt_cv_int_divbyzero_sigfpe="guessing no";; esac else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include static void #ifdef __cplusplus sigfpe_handler (int sig) #else sigfpe_handler (sig) int sig; #endif { /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */ exit (sig != SIGFPE); } int x = 1; int y = 0; int z; int nan; int main () { signal (SIGFPE, sigfpe_handler); /* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */ #if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP) signal (SIGTRAP, sigfpe_handler); #endif /* Linux/SPARC yields signal SIGILL. */ #if defined (__sparc__) && defined (__linux__) signal (SIGILL, sigfpe_handler); #endif z = x / y; nan = y / y; exit (1); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_int_divbyzero_sigfpe=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) gt_cv_int_divbyzero_sigfpe=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $gt_cv_int_divbyzero_sigfpe" >&5 echo "${ECHO_T}$gt_cv_int_divbyzero_sigfpe" >&6 case "$gt_cv_int_divbyzero_sigfpe" in *yes) value=1;; *) value=0;; esac cat >>confdefs.h <<_ACEOF #define INTDIV0_RAISES_SIGFPE $value _ACEOF echo "$as_me:$LINENO: checking for unsigned long long" >&5 echo $ECHO_N "checking for unsigned long long... $ECHO_C" >&6 if test "${ac_cv_type_unsigned_long_long+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ unsigned long long ull = 1ULL; int i = 63; int main () { unsigned long long ullmax = (unsigned long long) -1; return ull << i | ull >> i | ullmax / ull | ullmax % ull; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_unsigned_long_long=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_unsigned_long_long=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long_long" >&5 echo "${ECHO_T}$ac_cv_type_unsigned_long_long" >&6 if test $ac_cv_type_unsigned_long_long = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_UNSIGNED_LONG_LONG 1 _ACEOF fi if test $gl_cv_header_inttypes_h = no && test $gl_cv_header_stdint_h = no; then test $ac_cv_type_unsigned_long_long = yes \ && ac_type='unsigned long long' \ || ac_type='unsigned long' cat >>confdefs.h <<_ACEOF #define uintmax_t $ac_type _ACEOF else cat >>confdefs.h <<\_ACEOF #define HAVE_UINTMAX_T 1 _ACEOF fi echo "$as_me:$LINENO: checking for inttypes.h" >&5 echo $ECHO_N "checking for inttypes.h... $ECHO_C" >&6 if test "${gt_cv_header_inttypes_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_header_inttypes_h=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_header_inttypes_h=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gt_cv_header_inttypes_h" >&5 echo "${ECHO_T}$gt_cv_header_inttypes_h" >&6 if test $gt_cv_header_inttypes_h = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_INTTYPES_H 1 _ACEOF fi if test $gt_cv_header_inttypes_h = yes; then echo "$as_me:$LINENO: checking whether the inttypes.h PRIxNN macros are broken" >&5 echo $ECHO_N "checking whether the inttypes.h PRIxNN macros are broken... $ECHO_C" >&6 if test "${gt_cv_inttypes_pri_broken+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifdef PRId32 char *p = PRId32; #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_inttypes_pri_broken=no else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_inttypes_pri_broken=yes fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gt_cv_inttypes_pri_broken" >&5 echo "${ECHO_T}$gt_cv_inttypes_pri_broken" >&6 fi if test "$gt_cv_inttypes_pri_broken" = yes; then cat >>confdefs.h <<_ACEOF #define PRI_MACROS_BROKEN 1 _ACEOF fi for ac_header in stdint.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking for SIZE_MAX" >&5 echo $ECHO_N "checking for SIZE_MAX... $ECHO_C" >&6 result= cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_STDINT_H #include #endif #ifdef SIZE_MAX Found it #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "Found it" >/dev/null 2>&1; then result=yes fi rm -f conftest* if test -z "$result"; then if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 / 10) >= 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_lo=0 ac_mid=0 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 / 10) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=$ac_mid; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr $ac_mid + 1` if test $ac_lo -le $ac_mid; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid + 1` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 / 10) < 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=-1 ac_mid=-1 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 / 10) >= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_lo=$ac_mid; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_hi=`expr '(' $ac_mid ')' - 1` if test $ac_mid -le $ac_hi; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo= ac_hi= fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 / 10) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=$ac_mid else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr '(' $ac_mid ')' + 1` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in ?*) res_hi=$ac_lo;; '') result=? ;; esac else if test "$cross_compiling" = yes; then { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling See \`config.log' for more details." >&5 echo "$as_me: error: cannot run test program while cross compiling See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include long longval () { return ~(size_t)0 / 10; } unsigned long ulongval () { return ~(size_t)0 / 10; } #include #include int main () { FILE *f = fopen ("conftest.val", "w"); if (! f) exit (1); if ((~(size_t)0 / 10) < 0) { long i = longval (); if (i != (~(size_t)0 / 10)) exit (1); fprintf (f, "%ld\n", i); } else { unsigned long i = ulongval (); if (i != (~(size_t)0 / 10)) exit (1); fprintf (f, "%lu\n", i); } exit (ferror (f) || fclose (f) != 0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then res_hi=`cat conftest.val` else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) result=? fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi rm -f conftest.val if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 % 10) >= 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_lo=0 ac_mid=0 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 % 10) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=$ac_mid; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr $ac_mid + 1` if test $ac_lo -le $ac_mid; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid + 1` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 % 10) < 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=-1 ac_mid=-1 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 % 10) >= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_lo=$ac_mid; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_hi=`expr '(' $ac_mid ')' - 1` if test $ac_mid -le $ac_hi; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo= ac_hi= fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((~(size_t)0 % 10) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=$ac_mid else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr '(' $ac_mid ')' + 1` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in ?*) res_lo=$ac_lo;; '') result=? ;; esac else if test "$cross_compiling" = yes; then { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling See \`config.log' for more details." >&5 echo "$as_me: error: cannot run test program while cross compiling See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include long longval () { return ~(size_t)0 % 10; } unsigned long ulongval () { return ~(size_t)0 % 10; } #include #include int main () { FILE *f = fopen ("conftest.val", "w"); if (! f) exit (1); if ((~(size_t)0 % 10) < 0) { long i = longval (); if (i != (~(size_t)0 % 10)) exit (1); fprintf (f, "%ld\n", i); } else { unsigned long i = ulongval (); if (i != (~(size_t)0 % 10)) exit (1); fprintf (f, "%lu\n", i); } exit (ferror (f) || fclose (f) != 0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then res_lo=`cat conftest.val` else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) result=? fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi rm -f conftest.val if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((sizeof (size_t) <= sizeof (unsigned int)) >= 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_lo=0 ac_mid=0 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((sizeof (size_t) <= sizeof (unsigned int)) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=$ac_mid; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr $ac_mid + 1` if test $ac_lo -le $ac_mid; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid + 1` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((sizeof (size_t) <= sizeof (unsigned int)) < 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=-1 ac_mid=-1 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((sizeof (size_t) <= sizeof (unsigned int)) >= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_lo=$ac_mid; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_hi=`expr '(' $ac_mid ')' - 1` if test $ac_mid -le $ac_hi; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo= ac_hi= fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static int test_array [1 - 2 * !((sizeof (size_t) <= sizeof (unsigned int)) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_hi=$ac_mid else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr '(' $ac_mid ')' + 1` fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in ?*) fits_in_uint=$ac_lo;; '') result=? ;; esac else if test "$cross_compiling" = yes; then { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling See \`config.log' for more details." >&5 echo "$as_me: error: cannot run test program while cross compiling See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include long longval () { return sizeof (size_t) <= sizeof (unsigned int); } unsigned long ulongval () { return sizeof (size_t) <= sizeof (unsigned int); } #include #include int main () { FILE *f = fopen ("conftest.val", "w"); if (! f) exit (1); if ((sizeof (size_t) <= sizeof (unsigned int)) < 0) { long i = longval (); if (i != (sizeof (size_t) <= sizeof (unsigned int))) exit (1); fprintf (f, "%ld\n", i); } else { unsigned long i = ulongval (); if (i != (sizeof (size_t) <= sizeof (unsigned int))) exit (1); fprintf (f, "%lu\n", i); } exit (ferror (f) || fclose (f) != 0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then fits_in_uint=`cat conftest.val` else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) result=? fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi rm -f conftest.val if test "$fits_in_uint" = 1; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include extern size_t foo; extern unsigned long foo; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then fits_in_uint=0 else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi if test -z "$result"; then if test "$fits_in_uint" = 1; then result="$res_hi$res_lo"U else result="$res_hi$res_lo"UL fi else result='~(size_t)0' fi fi echo "$as_me:$LINENO: result: $result" >&5 echo "${ECHO_T}$result" >&6 if test "$result" != yes; then cat >>confdefs.h <<_ACEOF #define SIZE_MAX $result _ACEOF fi for ac_header in stdint.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking for CFPreferencesCopyAppValue" >&5 echo $ECHO_N "checking for CFPreferencesCopyAppValue... $ECHO_C" >&6 if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers" gt_save_LIBS="$LIBS" LIBS="$LIBS -framework CoreFoundation" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { CFPreferencesCopyAppValue(NULL, NULL) ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_func_CFPreferencesCopyAppValue=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_CFPreferencesCopyAppValue=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi echo "$as_me:$LINENO: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 echo "${ECHO_T}$gt_cv_func_CFPreferencesCopyAppValue" >&6 if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_CFPREFERENCESCOPYAPPVALUE 1 _ACEOF fi echo "$as_me:$LINENO: checking for CFLocaleCopyCurrent" >&5 echo $ECHO_N "checking for CFLocaleCopyCurrent... $ECHO_C" >&6 if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers" gt_save_LIBS="$LIBS" LIBS="$LIBS -framework CoreFoundation" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { CFLocaleCopyCurrent(); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_func_CFLocaleCopyCurrent=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_CFLocaleCopyCurrent=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi echo "$as_me:$LINENO: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 echo "${ECHO_T}$gt_cv_func_CFLocaleCopyCurrent" >&6 if test $gt_cv_func_CFLocaleCopyCurrent = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_CFLOCALECOPYCURRENT 1 _ACEOF fi INTL_MACOSX_LIBS= if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" fi if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval="$with_gnu_ld" test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi; # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo "$as_me:$LINENO: checking for ld used by GCC" >&5 echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then echo "$as_me:$LINENO: checking for GNU ld" >&5 echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 else echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 fi if test "${acl_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in *GNU* | *'with BFD'*) test "$with_gnu_ld" != no && break ;; *) test "$with_gnu_ld" != yes && break ;; esac fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$acl_cv_path_LD" if test -n "$LD"; then echo "$as_me:$LINENO: result: $LD" >&5 echo "${ECHO_T}$LD" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 if test "${acl_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. case `$LD -v 2>&1 &5 echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6 with_gnu_ld=$acl_cv_prog_gnu_ld echo "$as_me:$LINENO: checking for shared library run path origin" >&5 echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6 if test "${acl_cv_rpath+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done fi echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5 echo "${ECHO_T}$acl_cv_rpath" >&6 wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" # Check whether --enable-rpath or --disable-rpath was given. if test "${enable_rpath+set}" = set; then enableval="$enable_rpath" : else enable_rpath=yes fi; use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libiconv-prefix or --without-libiconv-prefix was given. if test "${with_libiconv_prefix+set}" = set; then withval="$with_libiconv_prefix" if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi fi; LIBICONV= LTLIBICONV= INCICONV= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='iconv ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" else : fi else found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$hardcode_direct" = yes; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" else LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" ;; esac done fi else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" done fi echo "$as_me:$LINENO: checking for ptrdiff_t" >&5 echo $ECHO_N "checking for ptrdiff_t... $ECHO_C" >&6 if test "${ac_cv_type_ptrdiff_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if ((ptrdiff_t *) 0) return 0; if (sizeof (ptrdiff_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_ptrdiff_t=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_ptrdiff_t=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_ptrdiff_t" >&5 echo "${ECHO_T}$ac_cv_type_ptrdiff_t" >&6 if test $ac_cv_type_ptrdiff_t = yes; then : else cat >>confdefs.h <<\_ACEOF #define ptrdiff_t long _ACEOF fi for ac_header in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ stdlib.h string.h unistd.h sys/param.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in asprintf fwprintf getcwd getegid geteuid getgid getuid \ mempcpy munmap putenv setenv setlocale snprintf stpcpy strcasecmp strdup \ strtoul tsearch wcslen __argz_count __argz_stringify __argz_next \ __fsetlocking do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking whether _snprintf is declared" >&5 echo $ECHO_N "checking whether _snprintf is declared... $ECHO_C" >&6 if test "${ac_cv_have_decl__snprintf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { #ifndef _snprintf char *p = (char *) _snprintf; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_have_decl__snprintf=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl__snprintf=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_have_decl__snprintf" >&5 echo "${ECHO_T}$ac_cv_have_decl__snprintf" >&6 if test $ac_cv_have_decl__snprintf = yes; then gt_value=1 else gt_value=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL__SNPRINTF $gt_value _ACEOF echo "$as_me:$LINENO: checking whether _snwprintf is declared" >&5 echo $ECHO_N "checking whether _snwprintf is declared... $ECHO_C" >&6 if test "${ac_cv_have_decl__snwprintf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { #ifndef _snwprintf char *p = (char *) _snwprintf; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_have_decl__snwprintf=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl__snwprintf=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_have_decl__snwprintf" >&5 echo "${ECHO_T}$ac_cv_have_decl__snwprintf" >&6 if test $ac_cv_have_decl__snwprintf = yes; then gt_value=1 else gt_value=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL__SNWPRINTF $gt_value _ACEOF echo "$as_me:$LINENO: checking whether feof_unlocked is declared" >&5 echo $ECHO_N "checking whether feof_unlocked is declared... $ECHO_C" >&6 if test "${ac_cv_have_decl_feof_unlocked+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { #ifndef feof_unlocked char *p = (char *) feof_unlocked; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_have_decl_feof_unlocked=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_feof_unlocked=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_have_decl_feof_unlocked" >&5 echo "${ECHO_T}$ac_cv_have_decl_feof_unlocked" >&6 if test $ac_cv_have_decl_feof_unlocked = yes; then gt_value=1 else gt_value=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL_FEOF_UNLOCKED $gt_value _ACEOF echo "$as_me:$LINENO: checking whether fgets_unlocked is declared" >&5 echo $ECHO_N "checking whether fgets_unlocked is declared... $ECHO_C" >&6 if test "${ac_cv_have_decl_fgets_unlocked+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { #ifndef fgets_unlocked char *p = (char *) fgets_unlocked; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_have_decl_fgets_unlocked=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_fgets_unlocked=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_have_decl_fgets_unlocked" >&5 echo "${ECHO_T}$ac_cv_have_decl_fgets_unlocked" >&6 if test $ac_cv_have_decl_fgets_unlocked = yes; then gt_value=1 else gt_value=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL_FGETS_UNLOCKED $gt_value _ACEOF echo "$as_me:$LINENO: checking whether getc_unlocked is declared" >&5 echo $ECHO_N "checking whether getc_unlocked is declared... $ECHO_C" >&6 if test "${ac_cv_have_decl_getc_unlocked+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { #ifndef getc_unlocked char *p = (char *) getc_unlocked; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_have_decl_getc_unlocked=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_getc_unlocked=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_have_decl_getc_unlocked" >&5 echo "${ECHO_T}$ac_cv_have_decl_getc_unlocked" >&6 if test $ac_cv_have_decl_getc_unlocked = yes; then gt_value=1 else gt_value=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL_GETC_UNLOCKED $gt_value _ACEOF case $gt_cv_func_printf_posix in *yes) HAVE_POSIX_PRINTF=1 ;; *) HAVE_POSIX_PRINTF=0 ;; esac if test "$ac_cv_func_asprintf" = yes; then HAVE_ASPRINTF=1 else HAVE_ASPRINTF=0 fi if test "$ac_cv_func_snprintf" = yes; then HAVE_SNPRINTF=1 else HAVE_SNPRINTF=0 fi if test "$ac_cv_func_wprintf" = yes; then HAVE_WPRINTF=1 else HAVE_WPRINTF=0 fi am_save_CPPFLAGS="$CPPFLAGS" for element in $INCICONV; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done echo "$as_me:$LINENO: checking for iconv" >&5 echo $ECHO_N "checking for iconv... $ECHO_C" >&6 if test "${am_cv_func_iconv+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then am_cv_func_iconv=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then am_cv_lib_iconv=yes am_cv_func_iconv=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$am_save_LIBS" fi fi echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5 echo "${ECHO_T}$am_cv_func_iconv" >&6 if test "$am_cv_func_iconv" = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ICONV 1 _ACEOF fi if test "$am_cv_lib_iconv" = yes; then echo "$as_me:$LINENO: checking how to link with libiconv" >&5 echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $LIBICONV" >&5 echo "${ECHO_T}$LIBICONV" >&6 else CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi if test "$am_cv_func_iconv" = yes; then echo "$as_me:$LINENO: checking for iconv declaration" >&5 echo $ECHO_N "checking for iconv declaration... $ECHO_C" >&6 if test "${am_cv_proto_iconv+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then am_cv_proto_iconv_arg1="" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_proto_iconv_arg1="const" fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);" fi am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` echo "$as_me:$LINENO: result: ${ac_t:- }$am_cv_proto_iconv" >&5 echo "${ECHO_T}${ac_t:- }$am_cv_proto_iconv" >&6 cat >>confdefs.h <<_ACEOF #define ICONV_CONST $am_cv_proto_iconv_arg1 _ACEOF fi echo "$as_me:$LINENO: checking for nl_langinfo and CODESET" >&5 echo $ECHO_N "checking for nl_langinfo and CODESET... $ECHO_C" >&6 if test "${am_cv_langinfo_codeset+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { char* cs = nl_langinfo(CODESET); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then am_cv_langinfo_codeset=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_langinfo_codeset=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $am_cv_langinfo_codeset" >&5 echo "${ECHO_T}$am_cv_langinfo_codeset" >&6 if test $am_cv_langinfo_codeset = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_LANGINFO_CODESET 1 _ACEOF fi if test $ac_cv_header_locale_h = yes; then echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6 if test "${gt_cv_val_LC_MESSAGES+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { return LC_MESSAGES ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_val_LC_MESSAGES=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_val_LC_MESSAGES=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gt_cv_val_LC_MESSAGES" >&5 echo "${ECHO_T}$gt_cv_val_LC_MESSAGES" >&6 if test $gt_cv_val_LC_MESSAGES = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_LC_MESSAGES 1 _ACEOF fi fi if test -n "$INTL_MACOSX_LIBS"; then CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers" fi for ac_prog in bison do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_INTLBISON+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$INTLBISON"; then ac_cv_prog_INTLBISON="$INTLBISON" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_INTLBISON="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi INTLBISON=$ac_cv_prog_INTLBISON if test -n "$INTLBISON"; then echo "$as_me:$LINENO: result: $INTLBISON" >&5 echo "${ECHO_T}$INTLBISON" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$INTLBISON" && break done if test -z "$INTLBISON"; then ac_verc_fail=yes else echo "$as_me:$LINENO: checking version of bison" >&5 echo $ECHO_N "checking version of bison... $ECHO_C" >&6 ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` case $ac_prog_version in '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; esac echo "$as_me:$LINENO: result: $ac_prog_version" >&5 echo "${ECHO_T}$ac_prog_version" >&6 fi if test $ac_verc_fail = yes; then INTLBISON=: fi echo "$as_me:$LINENO: checking for CFPreferencesCopyAppValue" >&5 echo $ECHO_N "checking for CFPreferencesCopyAppValue... $ECHO_C" >&6 if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers" gt_save_LIBS="$LIBS" LIBS="$LIBS -framework CoreFoundation" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { CFPreferencesCopyAppValue(NULL, NULL) ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_func_CFPreferencesCopyAppValue=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_CFPreferencesCopyAppValue=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi echo "$as_me:$LINENO: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 echo "${ECHO_T}$gt_cv_func_CFPreferencesCopyAppValue" >&6 if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_CFPREFERENCESCOPYAPPVALUE 1 _ACEOF fi echo "$as_me:$LINENO: checking for CFLocaleCopyCurrent" >&5 echo $ECHO_N "checking for CFLocaleCopyCurrent... $ECHO_C" >&6 if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers" gt_save_LIBS="$LIBS" LIBS="$LIBS -framework CoreFoundation" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { CFLocaleCopyCurrent(); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_func_CFLocaleCopyCurrent=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_CFLocaleCopyCurrent=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi echo "$as_me:$LINENO: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 echo "${ECHO_T}$gt_cv_func_CFLocaleCopyCurrent" >&6 if test $gt_cv_func_CFLocaleCopyCurrent = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_CFLOCALECOPYCURRENT 1 _ACEOF fi INTL_MACOSX_LIBS= if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" fi echo "$as_me:$LINENO: checking whether NLS is requested" >&5 echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" USE_NLS=$enableval else USE_NLS=yes fi; echo "$as_me:$LINENO: result: $USE_NLS" >&5 echo "${ECHO_T}$USE_NLS" >&6 BUILD_INCLUDED_LIBINTL=no USE_INCLUDED_LIBINTL=no LIBINTL= LTLIBINTL= POSUB= if test "$USE_NLS" = "yes"; then gt_use_preinstalled_gnugettext=no echo "$as_me:$LINENO: checking whether included gettext is requested" >&5 echo $ECHO_N "checking whether included gettext is requested... $ECHO_C" >&6 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" nls_cv_force_use_gnu_gettext=$withval else nls_cv_force_use_gnu_gettext=no fi; echo "$as_me:$LINENO: result: $nls_cv_force_use_gnu_gettext" >&5 echo "${ECHO_T}$nls_cv_force_use_gnu_gettext" >&6 nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5 echo $ECHO_N "checking for GNU gettext in libc... $ECHO_C" >&6 if test "${gt_cv_func_gnugettext1_libc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include extern int _nl_msg_cat_cntr; extern int *_nl_domain_bindings; int main () { bindtextdomain ("", ""); return * gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_func_gnugettext1_libc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_gnugettext1_libc=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libc" >&5 echo "${ECHO_T}$gt_cv_func_gnugettext1_libc" >&6 if test "$gt_cv_func_gnugettext1_libc" != "yes"; then use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libintl-prefix or --without-libintl-prefix was given. if test "${with_libintl_prefix+set}" = set; then withval="$with_libintl_prefix" if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi fi; LIBINTL= LTLIBINTL= INCINTL= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='intl ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" else : fi else found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$hardcode_direct" = yes; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" else LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" ;; esac done fi else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" done fi echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5 echo $ECHO_N "checking for GNU gettext in libintl... $ECHO_C" >&6 if test "${gt_cv_func_gnugettext1_libintl+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $INCINTL" gt_save_LIBS="$LIBS" LIBS="$LIBS $LIBINTL" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); int main () { bindtextdomain ("", ""); return * gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias ("") ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_func_gnugettext1_libintl=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_gnugettext1_libintl=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test "$gt_cv_func_gnugettext1_libintl" != yes && test -n "$LIBICONV"; then LIBS="$LIBS $LIBICONV" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); int main () { bindtextdomain ("", ""); return * gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias ("") ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then LIBINTL="$LIBINTL $LIBICONV" LTLIBINTL="$LTLIBINTL $LTLIBICONV" gt_cv_func_gnugettext1_libintl=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libintl" >&5 echo "${ECHO_T}$gt_cv_func_gnugettext1_libintl" >&6 fi if test "$gt_cv_func_gnugettext1_libc" = "yes" \ || { test "$gt_cv_func_gnugettext1_libintl" = "yes" \ && test "$PACKAGE" != gettext-runtime \ && test "$PACKAGE" != gettext-tools; }; then gt_use_preinstalled_gnugettext=yes else LIBINTL= LTLIBINTL= INCINTL= fi if test "$gt_use_preinstalled_gnugettext" != "yes"; then nls_cv_use_gnu_gettext=yes fi fi if test "$nls_cv_use_gnu_gettext" = "yes"; then BUILD_INCLUDED_LIBINTL=yes USE_INCLUDED_LIBINTL=yes LIBINTL="\${top_builddir}/intl/libintl.a $LIBICONV" LTLIBINTL="\${top_builddir}/intl/libintl.a $LTLIBICONV" LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` fi CATOBJEXT= if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then CATOBJEXT=.gmo fi if test -n "$INTL_MACOSX_LIBS"; then if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" fi fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then cat >>confdefs.h <<\_ACEOF #define ENABLE_NLS 1 _ACEOF else USE_NLS=no fi fi echo "$as_me:$LINENO: checking whether to use NLS" >&5 echo $ECHO_N "checking whether to use NLS... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $USE_NLS" >&5 echo "${ECHO_T}$USE_NLS" >&6 if test "$USE_NLS" = "yes"; then echo "$as_me:$LINENO: checking where the gettext function comes from" >&5 echo $ECHO_N "checking where the gettext function comes from... $ECHO_C" >&6 if test "$gt_use_preinstalled_gnugettext" = "yes"; then if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then gt_source="external libintl" else gt_source="libc" fi else gt_source="included intl directory" fi echo "$as_me:$LINENO: result: $gt_source" >&5 echo "${ECHO_T}$gt_source" >&6 fi if test "$USE_NLS" = "yes"; then if test "$gt_use_preinstalled_gnugettext" = "yes"; then if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then echo "$as_me:$LINENO: checking how to link with libintl" >&5 echo $ECHO_N "checking how to link with libintl... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $LIBINTL" >&5 echo "${ECHO_T}$LIBINTL" >&6 for element in $INCINTL; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done fi cat >>confdefs.h <<\_ACEOF #define HAVE_GETTEXT 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define HAVE_DCGETTEXT 1 _ACEOF fi POSUB=po fi if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then BUILD_INCLUDED_LIBINTL=yes fi nls_cv_header_intl= nls_cv_header_libgt= DATADIRNAME=share INSTOBJEXT=.mo GENCAT=gencat INTLOBJS= if test "$USE_INCLUDED_LIBINTL" = yes; then INTLOBJS="\$(GETTOBJS)" fi INTL_LIBTOOL_SUFFIX_PREFIX= INTLLIBS="$LIBINTL" abook_localedir="$datadir/locale" abook_localedir=`( test "x$prefix" = xNONE && prefix="$ac_default_prefix" eval tmp_abook_prefix=\""$abook_localedir"\" eval echo $tmp_abook_prefix )` localedir="\$(datadir)/locale" # Check whether --with-localedir or --without-localedir was given. if test "${with_localedir+set}" = set; then withval="$with_localedir" fi; if test "x$with_localedir" != "x"; then abook_localedir="$with_localedir" localedir="$with_localedir" fi cat >>confdefs.h <<_ACEOF #define LOCALEDIR "$abook_localedir" _ACEOF if test x$USE_INCLUDED_LIBINTL = xyes; then USE_INCLUDED_INTL_H_TRUE= USE_INCLUDED_INTL_H_FALSE='#' else USE_INCLUDED_INTL_H_TRUE='#' USE_INCLUDED_INTL_H_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$ac_ct_CC" && break done CC=$ac_ct_CC fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO:" \ "checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 (eval $ac_compiler -V &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS CFLAGS="-g" echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 if test "${ac_cv_prog_cc_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_stdc=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std1 is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std1. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF # Don't try gcc -ansi; that turns off useful extensions and # breaks some systems' header files. # AIX -qlanglvl=ansi # Ultrix and OSF/1 -std1 # HP-UX 10.20 and later -Ae # HP-UX older versions -Aa -D_HPUX_SOURCE # SVR4 -Xc -D__EXTENSIONS__ for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_stdc=$ac_arg break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext done rm -f conftest.$ac_ext conftest.$ac_objext CC=$ac_save_CC fi case "x$ac_cv_prog_cc_stdc" in x|xno) echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6 ;; *) echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 CC="$CC $ac_cv_prog_cc_stdc" ;; esac # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide # the declaration of exit, since it's the most demanding environment. cat >conftest.$ac_ext <<_ACEOF #ifndef __cplusplus choke me #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ 'extern "C" void exit (int);' \ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration #include int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 continue fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then echo '#ifdef __cplusplus' >>confdefs.h echo $ac_declaration >>confdefs.h echo '#endif' >>confdefs.h fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi echo "$as_me:$LINENO: checking for library containing strerror" >&5 echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6 if test "${ac_cv_search_strerror+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS ac_cv_search_strerror=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strerror (); int main () { strerror (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_strerror="none required" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test "$ac_cv_search_strerror" = no; then for ac_lib in cposix; do LIBS="-l$ac_lib $ac_func_search_save_LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strerror (); int main () { strerror (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_strerror="-l$ac_lib" break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext done fi LIBS=$ac_func_search_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 echo "${ECHO_T}$ac_cv_search_strerror" >&6 if test "$ac_cv_search_strerror" != no; then test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS" fi echo "$as_me:$LINENO: checking for function prototypes" >&5 echo $ECHO_N "checking for function prototypes... $ECHO_C" >&6 if test "$ac_cv_prog_cc_stdc" != no; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 cat >>confdefs.h <<\_ACEOF #define PROTOTYPES 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define __PROTOTYPES 1 _ACEOF else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi if test "$ac_cv_prog_cc_stdc" != no; then U= ANSI2KNR= else U=_ ANSI2KNR=./ansi2knr fi # Ensure some checks needed by ansi2knr itself. for ac_header in string.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done if test "x$U" != "x"; then { { echo "$as_me:$LINENO: error: Compiler not ANSI compliant" >&5 echo "$as_me: error: Compiler not ANSI compliant" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: checking for inline" >&5 echo $ECHO_N "checking for inline... $ECHO_C" >&6 if test "${ac_cv_c_inline+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifndef __cplusplus typedef int foo_t; static $ac_kw foo_t static_foo () {return 0; } $ac_kw foo_t foo () {return 0; } #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_inline=$ac_kw; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done fi echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 echo "${ECHO_T}$ac_cv_c_inline" >&6 case $ac_cv_c_inline in inline | yes) ;; *) case $ac_cv_c_inline in no) ac_val=;; *) ac_val=$ac_cv_c_inline;; esac cat >>confdefs.h <<_ACEOF #ifndef __cplusplus #define inline $ac_val #endif _ACEOF ;; esac # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi for ac_header in unistd.h locale.h sys/ioctl.h iconv.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done if test "${ac_cv_header_stdarg_h+set}" = set; then echo "$as_me:$LINENO: checking for stdarg.h" >&5 echo $ECHO_N "checking for stdarg.h... $ECHO_C" >&6 if test "${ac_cv_header_stdarg_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: $ac_cv_header_stdarg_h" >&5 echo "${ECHO_T}$ac_cv_header_stdarg_h" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking stdarg.h usability" >&5 echo $ECHO_N "checking stdarg.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking stdarg.h presence" >&5 echo $ECHO_N "checking stdarg.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: stdarg.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: stdarg.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: stdarg.h: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: stdarg.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: stdarg.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: stdarg.h: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: stdarg.h: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: stdarg.h: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: stdarg.h: see the Autoconf documentation" >&5 echo "$as_me: WARNING: stdarg.h: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: stdarg.h: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: stdarg.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: stdarg.h: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: stdarg.h: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: stdarg.h: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: stdarg.h: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for stdarg.h" >&5 echo $ECHO_N "checking for stdarg.h... $ECHO_C" >&6 if test "${ac_cv_header_stdarg_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_header_stdarg_h=$ac_header_preproc fi echo "$as_me:$LINENO: result: $ac_cv_header_stdarg_h" >&5 echo "${ECHO_T}$ac_cv_header_stdarg_h" >&6 fi if test $ac_cv_header_stdarg_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_STDARG_H 1 _ACEOF else { { echo "$as_me:$LINENO: error: *** stdarg.h is missing on your system ***" >&5 echo "$as_me: error: *** stdarg.h is missing on your system ***" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: checking for working strcoll" >&5 echo $ECHO_N "checking for working strcoll... $ECHO_C" >&6 if test "${ac_cv_func_strcoll_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_func_strcoll_works=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { exit (strcoll ("abc", "def") >= 0 || strcoll ("ABC", "DEF") >= 0 || strcoll ("123", "456") >= 0) ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_strcoll_works=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_strcoll_works=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $ac_cv_func_strcoll_works" >&5 echo "${ECHO_T}$ac_cv_func_strcoll_works" >&6 if test $ac_cv_func_strcoll_works = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_STRCOLL 1 _ACEOF fi for ac_func in setlocale do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done ac_widec_funcs=yes if test "${ac_cv_header_wchar_h+set}" = set; then echo "$as_me:$LINENO: checking for wchar.h" >&5 echo $ECHO_N "checking for wchar.h... $ECHO_C" >&6 if test "${ac_cv_header_wchar_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: $ac_cv_header_wchar_h" >&5 echo "${ECHO_T}$ac_cv_header_wchar_h" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking wchar.h usability" >&5 echo $ECHO_N "checking wchar.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking wchar.h presence" >&5 echo $ECHO_N "checking wchar.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: wchar.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: wchar.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: wchar.h: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: wchar.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: wchar.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: wchar.h: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: wchar.h: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: wchar.h: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: wchar.h: see the Autoconf documentation" >&5 echo "$as_me: WARNING: wchar.h: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: wchar.h: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: wchar.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: wchar.h: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: wchar.h: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: wchar.h: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: wchar.h: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for wchar.h" >&5 echo $ECHO_N "checking for wchar.h... $ECHO_C" >&6 if test "${ac_cv_header_wchar_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_header_wchar_h=$ac_header_preproc fi echo "$as_me:$LINENO: result: $ac_cv_header_wchar_h" >&5 echo "${ECHO_T}$ac_cv_header_wchar_h" >&6 fi if test $ac_cv_header_wchar_h = yes; then ac_have_wchar_h=yes cat >>confdefs.h <<\_ACEOF #define HAVE_WCHAR_H 1 _ACEOF else ac_have_wchar_h=no fi for ac_func in mbtowc wcwidth mbrtowc mbsinit do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF else ac_widec_funcs=no fi done echo "$as_me:$LINENO: checking whether wcwidth is declared" >&5 echo $ECHO_N "checking whether wcwidth is declared... $ECHO_C" >&6 if test "${ac_cv_have_decl_wcwidth+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { #ifndef wcwidth char *p = (char *) wcwidth; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_have_decl_wcwidth=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_wcwidth=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_have_decl_wcwidth" >&5 echo "${ECHO_T}$ac_cv_have_decl_wcwidth" >&6 if test $ac_cv_have_decl_wcwidth = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DECL_WCWIDTH 1 _ACEOF else cat >>confdefs.h <<_ACEOF #define HAVE_DECL_WCWIDTH 0 _ACEOF fi echo "$as_me:$LINENO: checking for wchar_t" >&5 echo $ECHO_N "checking for wchar_t... $ECHO_C" >&6 if test "${ac_cv_type_wchar_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if ((wchar_t *) 0) return 0; if (sizeof (wchar_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_wchar_t=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_wchar_t=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_wchar_t" >&5 echo "${ECHO_T}$ac_cv_type_wchar_t" >&6 if test $ac_cv_type_wchar_t = yes; then : else ac_widec_funcs=no fi if test x$ac_widec_funcs = xyes -a x$ac_have_wchar_h = xyes; then ac_widec_possible=yes else ac_widec_possible=no fi abook_cv_curses=/usr # Check whether --with-curses or --without-curses was given. if test "${with_curses+set}" = set; then withval="$with_curses" if test $withval != yes; then abook_cv_curses=$withval fi if test x$abook_cv_curses != x/usr; then LDFLAGS="-L${abook_cv_curses}/lib $LDFLAGS" CPPFLAGS="$CPPFLAGS -I${abook_cv_curses}/include" fi fi; echo "$as_me:$LINENO: checking for initscr in -lncursesw" >&5 echo $ECHO_N "checking for initscr in -lncursesw... $ECHO_C" >&6 if test "${ac_cv_lib_ncursesw_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lncursesw $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char initscr (); int main () { initscr (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_ncursesw_initscr=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_ncursesw_initscr=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_ncursesw_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_ncursesw_initscr" >&6 if test $ac_cv_lib_ncursesw_initscr = yes; then LIBS="$LIBS -lncursesw" if test x$abook_cv_curses = x/usr -a -d /usr/include/ncursesw; then CPPFLAGS="$CPPFLAGS -I/usr/include/ncursesw" fi for ac_header in ncurses.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done else ac_widec_possible=no echo "$as_me:$LINENO: checking for initscr in -lncurses" >&5 echo $ECHO_N "checking for initscr in -lncurses... $ECHO_C" >&6 if test "${ac_cv_lib_ncurses_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lncurses $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char initscr (); int main () { initscr (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_ncurses_initscr=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_ncurses_initscr=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_ncurses_initscr" >&6 if test $ac_cv_lib_ncurses_initscr = yes; then LIBS="$LIBS -lncurses" if test x$abook_cv_curses = x/usr -a -d /usr/include/ncurses; then CPPFLAGS="$CPPFLAGS -I/usr/include/ncurses" fi for ac_header in ncurses.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done else echo "$as_me:$LINENO: checking for initscr" >&5 echo $ECHO_N "checking for initscr... $ECHO_C" >&6 if test "${ac_cv_func_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define initscr to an innocuous variant, in case declares initscr. For example, HP-UX 11i declares gettimeofday. */ #define initscr innocuous_initscr /* System header to define __stub macros and hopefully few prototypes, which can conflict with char initscr (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef initscr /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char initscr (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_initscr) || defined (__stub___initscr) choke me #else char (*f) () = initscr; #endif #ifdef __cplusplus } #endif int main () { return f != initscr; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_initscr=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_initscr=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_initscr" >&5 echo "${ECHO_T}$ac_cv_func_initscr" >&6 if test $ac_cv_func_initscr = yes; then : else case $host_os in #(vi freebsd*) #(vi echo "$as_me:$LINENO: checking for tgoto in -lmytinfo" >&5 echo $ECHO_N "checking for tgoto in -lmytinfo... $ECHO_C" >&6 if test "${ac_cv_lib_mytinfo_tgoto+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lmytinfo $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char tgoto (); int main () { tgoto (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_mytinfo_tgoto=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_mytinfo_tgoto=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_mytinfo_tgoto" >&5 echo "${ECHO_T}$ac_cv_lib_mytinfo_tgoto" >&6 if test $ac_cv_lib_mytinfo_tgoto = yes; then LIBS="-lmytinfo $LIBS" fi ;; hpux10.*|hpux11.*) echo "$as_me:$LINENO: checking for initscr in -lcur_colr" >&5 echo $ECHO_N "checking for initscr in -lcur_colr... $ECHO_C" >&6 if test "${ac_cv_lib_cur_colr_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lcur_colr $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char initscr (); int main () { initscr (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_cur_colr_initscr=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_cur_colr_initscr=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_cur_colr_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_cur_colr_initscr" >&6 if test $ac_cv_lib_cur_colr_initscr = yes; then LIBS="-lcur_colr $LIBS" CFLAGS="-I/usr/include/curses_colr $CFLAGS" ac_cv_func_initscr=yes else echo "$as_me:$LINENO: checking for initscr in -lHcurses" >&5 echo $ECHO_N "checking for initscr in -lHcurses... $ECHO_C" >&6 if test "${ac_cv_lib_Hcurses_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lHcurses $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char initscr (); int main () { initscr (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_Hcurses_initscr=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_Hcurses_initscr=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_Hcurses_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_Hcurses_initscr" >&6 if test $ac_cv_lib_Hcurses_initscr = yes; then # HP's header uses __HP_CURSES, but user claims _HP_CURSES. LIBS="-lHcurses $LIBS" CFLAGS="-D__HP_CURSES -D_HP_CURSES $CFLAGS" ac_cv_func_initscr=yes fi fi ;; linux*) # Suse Linux does not follow /usr/lib convention LIBS="$LIBS -L/lib" ;; esac if test ".$With5lib" != ".no" ; then if test -d /usr/5lib ; then # SunOS 3.x or 4.x CPPFLAGS="$CPPFLAGS -I/usr/5include" LIBS="$LIBS -L/usr/5lib" fi fi if test ".$ac_cv_func_initscr" != .yes ; then cf_save_LIBS="$LIBS" cf_term_lib="" cf_curs_lib="" # Check for library containing tgoto. Do this before curses library # because it may be needed to link the test-case for initscr. echo "$as_me:$LINENO: checking for tgoto" >&5 echo $ECHO_N "checking for tgoto... $ECHO_C" >&6 if test "${ac_cv_func_tgoto+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define tgoto to an innocuous variant, in case declares tgoto. For example, HP-UX 11i declares gettimeofday. */ #define tgoto innocuous_tgoto /* System header to define __stub macros and hopefully few prototypes, which can conflict with char tgoto (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef tgoto /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char tgoto (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_tgoto) || defined (__stub___tgoto) choke me #else char (*f) () = tgoto; #endif #ifdef __cplusplus } #endif int main () { return f != tgoto; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_tgoto=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_tgoto=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_tgoto" >&5 echo "${ECHO_T}$ac_cv_func_tgoto" >&6 if test $ac_cv_func_tgoto = yes; then cf_term_lib=predefined else for cf_term_lib in termcap termlib unknown do as_ac_Lib=`echo "ac_cv_lib_$cf_term_lib''_tgoto" | $as_tr_sh` echo "$as_me:$LINENO: checking for tgoto in -l$cf_term_lib" >&5 echo $ECHO_N "checking for tgoto in -l$cf_term_lib... $ECHO_C" >&6 if eval "test \"\${$as_ac_Lib+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-l$cf_term_lib $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char tgoto (); int main () { tgoto (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Lib=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Lib=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Lib'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Lib'}'`" >&6 if test `eval echo '${'$as_ac_Lib'}'` = yes; then break fi done fi # Check for library containing initscr test "$cf_term_lib" != predefined && test "$cf_term_lib" != unknown && LIBS="-l$cf_term_lib $cf_save_LIBS" for cf_curs_lib in cursesX curses ncurses xcurses jcurses unknown do as_ac_Lib=`echo "ac_cv_lib_$cf_curs_lib''_initscr" | $as_tr_sh` echo "$as_me:$LINENO: checking for initscr in -l$cf_curs_lib" >&5 echo $ECHO_N "checking for initscr in -l$cf_curs_lib... $ECHO_C" >&6 if eval "test \"\${$as_ac_Lib+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-l$cf_curs_lib $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char initscr (); int main () { initscr (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Lib=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Lib=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Lib'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Lib'}'`" >&6 if test `eval echo '${'$as_ac_Lib'}'` = yes; then break fi done test $cf_curs_lib = unknown && { { echo "$as_me:$LINENO: error: no curses library found" >&5 echo "$as_me: error: no curses library found" >&2;} { (exit 1); exit 1; }; } LIBS="-l$cf_curs_lib $cf_save_LIBS" if test "$cf_term_lib" = unknown ; then echo "$as_me:$LINENO: checking if we can link with $cf_curs_lib library" >&5 echo $ECHO_N "checking if we can link with $cf_curs_lib library... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <${cf_cv_ncurses_header-curses.h}> int main () { initscr() ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cf_result=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cf_result=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext echo "$as_me:$LINENO: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test $cf_result = no && { { echo "$as_me:$LINENO: error: Cannot link curses library" >&5 echo "$as_me: error: Cannot link curses library" >&2;} { (exit 1); exit 1; }; } elif test "$cf_term_lib" != predefined ; then echo "$as_me:$LINENO: checking if we need both $cf_curs_lib and $cf_term_lib libraries" >&5 echo $ECHO_N "checking if we need both $cf_curs_lib and $cf_term_lib libraries... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <${cf_cv_ncurses_header-curses.h}> int main () { initscr(); tgoto((char *)0, 0, 0); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cf_result=no else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 LIBS="-l$cf_curs_lib -l$cf_term_lib $cf_save_LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <${cf_cv_ncurses_header-curses.h}> int main () { initscr() ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cf_result=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cf_result=error fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext echo "$as_me:$LINENO: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 fi fi fi fi fi abook_cv_readline=/usr # Check whether --with-readline or --without-readline was given. if test "${with_readline+set}" = set; then withval="$with_readline" if test $withval != yes; then abook_cv_readline=$withval fi if test x$abook_cv_readline != x/usr; then LDFLAGS="-L${abook_cv_readline}/lib $LDFLAGS" CPPFLAGS="$CPPFLAGS -I${abook_cv_readline}/include" fi fi; echo "$as_me:$LINENO: checking for a readline compatible library" >&5 echo $ECHO_N "checking for a readline compatible library... $ECHO_C" >&6 if test "${ac_cv_lib_readline+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ORIG_LIBS="$LIBS" for readline_lib in readline edit editline; do for termcap_lib in "" termcap curses ncurses; do if test -z "$termcap_lib"; then TRY_LIB="-l$readline_lib" else TRY_LIB="-l$readline_lib -l$termcap_lib" fi LIBS="$ORIG_LIBS $TRY_LIB" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char readline (); int main () { readline (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_readline="$TRY_LIB" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -n "$ac_cv_lib_readline"; then break fi done if test -n "$ac_cv_lib_readline"; then break fi done if test -z "$ac_cv_lib_readline"; then ac_cv_lib_readline="no" fi LIBS="$ORIG_LIBS" fi echo "$as_me:$LINENO: result: $ac_cv_lib_readline" >&5 echo "${ECHO_T}$ac_cv_lib_readline" >&6 if test "$ac_cv_lib_readline" != "no"; then LIBS="$LIBS $ac_cv_lib_readline" cat >>confdefs.h <<\_ACEOF #define HAVE_LIBREADLINE 1 _ACEOF for ac_header in readline.h readline/readline.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking whether readline supports history" >&5 echo $ECHO_N "checking whether readline supports history... $ECHO_C" >&6 if test "${ac_cv_lib_readline_history+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_lib_readline_history="no" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char add_history (); int main () { add_history (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_readline_history="yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_lib_readline_history" >&5 echo "${ECHO_T}$ac_cv_lib_readline_history" >&6 if test "$ac_cv_lib_readline_history" = "yes"; then cat >>confdefs.h <<\_ACEOF #define HAVE_READLINE_HISTORY 1 _ACEOF for ac_header in history.h readline/history.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done fi fi if test x$ac_cv_lib_readline = xno -o x$ac_cv_lib_readline_history = xno; then { { echo "$as_me:$LINENO: error: *** readline library not found or it doesn't support history ***" >&5 echo "$as_me: error: *** readline library not found or it doesn't support history ***" >&2;} { (exit 1); exit 1; }; } fi if test x$ac_widec_possible = xyes; then cat >>confdefs.h <<\_ACEOF #define HANDLE_MULTIBYTE 1 _ACEOF fi for ac_func in resizeterm do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in snprintf vsnprintf do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" case "${enableval}" in yes) debug=true ;; no) debug=false ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-debug" >&5 echo "$as_me: error: bad value ${enableval} for --enable-debug" >&2;} { (exit 1); exit 1; }; } ;; esac else debug=false fi; if test x$debug = xtrue; then CPPFLAGS="-DDEBUG=1 $CPPFLAGS" CFLAGS="-g $CFLAGS" fi if test x$GCC = xyes; then CFLAGS="-Wall $CFLAGS" fi ac_config_files="$ac_config_files Makefile abook.spec intl/Makefile po/Makefile.in" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. { (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | sed ' t clear : clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; }' fi DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_i=`echo "$ac_i" | sed 's/\$U\././;s/\.o$//;s/\.obj$//'` # 2. Add them. ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${USE_INCLUDED_INTL_H_TRUE}" && test -z "${USE_INCLUDED_INTL_H_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"USE_INCLUDED_INTL_H\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"USE_INCLUDED_INTL_H\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by $as_me, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 _ACEOF # Files that config.status was made for. if test -n "$ac_config_files"; then echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS fi if test -n "$ac_config_headers"; then echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS fi if test -n "$ac_config_links"; then echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS fi if test -n "$ac_config_commands"; then echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS fi cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir INSTALL="$INSTALL" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ac_shift=: ;; -*) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. ac_option=$1 ac_need_defaults=false;; esac case $ac_option in # Handling of the options. _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # INIT-COMMANDS section. # # Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it # from automake. eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="${LINGUAS-%UNSET%}" AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "abook.spec" ) CONFIG_FILES="$CONFIG_FILES abook.spec" ;; "intl/Makefile" ) CONFIG_FILES="$CONFIG_FILES intl/Makefile" ;; "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason to put it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "\$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF s,@SHELL@,$SHELL,;t t s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@exec_prefix@,$exec_prefix,;t t s,@prefix@,$prefix,;t t s,@program_transform_name@,$program_transform_name,;t t s,@bindir@,$bindir,;t t s,@sbindir@,$sbindir,;t t s,@libexecdir@,$libexecdir,;t t s,@datadir@,$datadir,;t t s,@sysconfdir@,$sysconfdir,;t t s,@sharedstatedir@,$sharedstatedir,;t t s,@localstatedir@,$localstatedir,;t t s,@libdir@,$libdir,;t t s,@includedir@,$includedir,;t t s,@oldincludedir@,$oldincludedir,;t t s,@infodir@,$infodir,;t t s,@mandir@,$mandir,;t t s,@build_alias@,$build_alias,;t t s,@host_alias@,$host_alias,;t t s,@target_alias@,$target_alias,;t t s,@DEFS@,$DEFS,;t t s,@ECHO_C@,$ECHO_C,;t t s,@ECHO_N@,$ECHO_N,;t t s,@ECHO_T@,$ECHO_T,;t t s,@LIBS@,$LIBS,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@CYGPATH_W@,$CYGPATH_W,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t s,@ACLOCAL@,$ACLOCAL,;t t s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t s,@install_sh@,$install_sh,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t s,@mkdir_p@,$mkdir_p,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@am__leading_dot@,$am__leading_dot,;t t s,@AMTAR@,$AMTAR,;t t s,@am__tar@,$am__tar,;t t s,@am__untar@,$am__untar,;t t s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t s,@USE_NLS@,$USE_NLS,;t t s,@MSGFMT@,$MSGFMT,;t t s,@GMSGFMT@,$GMSGFMT,;t t s,@XGETTEXT@,$XGETTEXT,;t t s,@MSGMERGE@,$MSGMERGE,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t s,@DEPDIR@,$DEPDIR,;t t s,@am__include@,$am__include,;t t s,@am__quote@,$am__quote,;t t s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t s,@CCDEPMODE@,$CCDEPMODE,;t t s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t s,@build@,$build,;t t s,@build_cpu@,$build_cpu,;t t s,@build_vendor@,$build_vendor,;t t s,@build_os@,$build_os,;t t s,@host@,$host,;t t s,@host_cpu@,$host_cpu,;t t s,@host_vendor@,$host_vendor,;t t s,@host_os@,$host_os,;t t s,@CPP@,$CPP,;t t s,@EGREP@,$EGREP,;t t s,@GLIBC2@,$GLIBC2,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t s,@ALLOCA@,$ALLOCA,;t t s,@GLIBC21@,$GLIBC21,;t t s,@INTL_MACOSX_LIBS@,$INTL_MACOSX_LIBS,;t t s,@HAVE_POSIX_PRINTF@,$HAVE_POSIX_PRINTF,;t t s,@HAVE_ASPRINTF@,$HAVE_ASPRINTF,;t t s,@HAVE_SNPRINTF@,$HAVE_SNPRINTF,;t t s,@HAVE_WPRINTF@,$HAVE_WPRINTF,;t t s,@LIBICONV@,$LIBICONV,;t t s,@LTLIBICONV@,$LTLIBICONV,;t t s,@INTLBISON@,$INTLBISON,;t t s,@BUILD_INCLUDED_LIBINTL@,$BUILD_INCLUDED_LIBINTL,;t t s,@USE_INCLUDED_LIBINTL@,$USE_INCLUDED_LIBINTL,;t t s,@CATOBJEXT@,$CATOBJEXT,;t t s,@DATADIRNAME@,$DATADIRNAME,;t t s,@INSTOBJEXT@,$INSTOBJEXT,;t t s,@GENCAT@,$GENCAT,;t t s,@INTLOBJS@,$INTLOBJS,;t t s,@INTL_LIBTOOL_SUFFIX_PREFIX@,$INTL_LIBTOOL_SUFFIX_PREFIX,;t t s,@INTLLIBS@,$INTLLIBS,;t t s,@LIBINTL@,$LIBINTL,;t t s,@LTLIBINTL@,$LTLIBINTL,;t t s,@POSUB@,$POSUB,;t t s,@localedir@,$localedir,;t t s,@USE_INCLUDED_INTL_H_TRUE@,$USE_INCLUDED_INTL_H_TRUE,;t t s,@USE_INCLUDED_INTL_H_FALSE@,$USE_INCLUDED_INTL_H_FALSE,;t t s,@U@,$U,;t t s,@ANSI2KNR@,$ANSI2KNR,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_HEADER section. # # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } # Do quote $f, to prevent DOS paths from being IFS'd. echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. sed 's/[ ]*$//' $ac_file_inputs >$tmp/in _ACEOF # Transform confdefs.h into two sed scripts, `conftest.defines' and # `conftest.undefs', that substitutes the proper values into # config.h.in to produce config.h. The first handles `#define' # templates, and the second `#undef' templates. # And first: Protect against being on the right side of a sed subst in # config.status. Protect against being in an unquoted here document # in config.status. rm -f conftest.defines conftest.undefs # Using a here document instead of a string reduces the quoting nightmare. # Putting comments in sed scripts is not portable. # # `end' is used to avoid that the second main sed command (meant for # 0-ary CPP macros) applies to n-ary macro definitions. # See the Autoconf documentation for `clear'. cat >confdef2sed.sed <<\_ACEOF s/[\\&,]/\\&/g s,[\\$`],\\&,g t clear : clear s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp t end s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp : end _ACEOF # If some macros were called several times there might be several times # the same #defines, which is useless. Nevertheless, we may not want to # sort them, since we want the *last* AC-DEFINE to be honored. uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs rm -f confdef2sed.sed # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >>conftest.undefs <<\_ACEOF s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, _ACEOF # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.defines >/dev/null do # Write a limited-size here document to $tmp/defines.sed. echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#define' lines. echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/defines.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail rm -f conftest.defines mv conftest.tail conftest.defines done rm -f conftest.defines echo ' fi # grep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #undef templates' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.undefs >/dev/null do # Write a limited-size here document to $tmp/undefs.sed. echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#undef' echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/undefs.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail rm -f conftest.undefs mv conftest.tail conftest.undefs done rm -f conftest.undefs cat >>$CONFIG_STATUS <<\_ACEOF # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then echo "/* Generated by configure. */" >$tmp/config.h else echo "/* $ac_file. Generated by configure. */" >$tmp/config.h fi cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then if diff $ac_file $tmp/config.h >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file fi else cat $tmp/config.h rm -f $tmp/config.h fi # Compute $ac_file's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $ac_file | $ac_file:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X$ac_file : 'X\(//\)[^/]' \| \ X$ac_file : 'X\(//\)$' \| \ X$ac_file : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X$ac_file | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'`/stamp-h$_am_stamp_count done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in default-1 ) for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac # Treat a directory as a PO directory if and only if it has a # POTFILES.in file. This allows packages to have multiple PO # directories under different names or in different locations. if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assigment from automake. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi # Compute POFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) # Compute UPDATEPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) # Compute DUMMYPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) # Compute GMOFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= UPDATEPOFILES= DUMMYPOFILES= GMOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" fi ;; esac done ;; depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`(dirname "$mf") 2>/dev/null || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`(dirname "$file") 2>/dev/null || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p $dirpart/$fdir else as_dir=$dirpart/$fdir as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi abook-0.6.0pre2/ABOUT-NLS000644 000764 000764 00000203620 10312765617 015415 0ustar00jaakkojaakko000000 000000 1 Notes on the Free Translation Project *************************************** Free software is going international! The Free Translation Project is a way to get maintainers of free software, translators, and users all together, so that free software will gradually become able to speak many languages. A few packages already provide translations for their messages. If you found this `ABOUT-NLS' file inside a distribution, you may assume that the distributed package does use GNU `gettext' internally, itself available at your nearest GNU archive site. But you do _not_ need to install GNU `gettext' prior to configuring, installing or using this package with messages translated. Installers will find here some useful hints. These notes also explain how users should proceed for getting the programs to use the available translations. They tell how people wanting to contribute and work on translations can contact the appropriate team. When reporting bugs in the `intl/' directory or bugs which may be related to internationalization, you should tell about the version of `gettext' which is used. The information can be found in the `intl/VERSION' file, in internationalized packages. 1.1 Quick configuration advice ============================== If you want to exploit the full power of internationalization, you should configure it using ./configure --with-included-gettext to force usage of internationalizing routines provided within this package, despite the existence of internationalizing capabilities in the operating system where this package is being installed. So far, only the `gettext' implementation in the GNU C library version 2 provides as many features (such as locale alias, message inheritance, automatic charset conversion or plural form handling) as the implementation here. It is also not possible to offer this additional functionality on top of a `catgets' implementation. Future versions of GNU `gettext' will very likely convey even more functionality. So it might be a good idea to change to GNU `gettext' as soon as possible. So you need _not_ provide this option if you are using GNU libc 2 or you have installed a recent copy of the GNU gettext package with the included `libintl'. 1.2 INSTALL Matters =================== Some packages are "localizable" when properly installed; the programs they contain can be made to speak your own native language. Most such packages use GNU `gettext'. Other packages have their own ways to internationalization, predating GNU `gettext'. By default, this package will be installed to allow translation of messages. It will automatically detect whether the system already provides the GNU `gettext' functions. If not, the included GNU `gettext' library will be used. This library is wholly contained within this package, usually in the `intl/' subdirectory, so prior installation of the GNU `gettext' package is _not_ required. Installers may use special options at configuration time for changing the default behaviour. The commands: ./configure --with-included-gettext ./configure --disable-nls will, respectively, bypass any pre-existing `gettext' to use the internationalizing routines provided within this package, or else, _totally_ disable translation of messages. When you already have GNU `gettext' installed on your system and run configure without an option for your new package, `configure' will probably detect the previously built and installed `libintl.a' file and will decide to use this. This might not be desirable. You should use the more recent version of the GNU `gettext' library. I.e. if the file `intl/VERSION' shows that the library which comes with this package is more recent, you should use ./configure --with-included-gettext to prevent auto-detection. The configuration process will not test for the `catgets' function and therefore it will not be used. The reason is that even an emulation of `gettext' on top of `catgets' could not provide all the extensions of the GNU `gettext' library. Internationalized packages usually have many `po/LL.po' files, where LL gives an ISO 639 two-letter code identifying the language. Unless translations have been forbidden at `configure' time by using the `--disable-nls' switch, all available translations are installed together with the package. However, the environment variable `LINGUAS' may be set, prior to configuration, to limit the installed set. `LINGUAS' should then contain a space separated list of two-letter codes, stating which languages are allowed. 1.3 Using This Package ====================== As a user, if your language has been installed for this package, you only have to set the `LANG' environment variable to the appropriate `LL_CC' combination. Here `LL' is an ISO 639 two-letter language code, and `CC' is an ISO 3166 two-letter country code. For example, let's suppose that you speak German and live in Germany. At the shell prompt, merely execute `setenv LANG de_DE' (in `csh'), `export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). This can be done from your `.login' or `.profile' file, once and for all. You might think that the country code specification is redundant. But in fact, some languages have dialects in different countries. For example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The country code serves to distinguish the dialects. The locale naming convention of `LL_CC', with `LL' denoting the language and `CC' denoting the country, is the one use on systems based on GNU libc. On other systems, some variations of this scheme are used, such as `LL' or `LL_CC.ENCODING'. You can get the list of locales supported by your system for your country by running the command `locale -a | grep '^LL''. Not all programs have translations for all languages. By default, an English message is shown in place of a nonexistent translation. If you understand other languages, you can set up a priority list of languages. This is done through a different environment variable, called `LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' for the purpose of message handling, but you still need to have `LANG' set to the primary language; this is required by other parts of the system libraries. For example, some Swedish users who would rather read translations in German than English for when Swedish is not available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. Special advice for Norwegian users: The language code for Norwegian bokma*l changed from `no' to `nb' recently (in 2003). During the transition period, while some message catalogs for this language are installed under `nb' and some older ones under `no', it's recommended for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and older translations are used. In the `LANGUAGE' environment variable, but not in the `LANG' environment variable, `LL_CC' combinations can be abbreviated as `LL' to denote the language's main dialect. For example, `de' is equivalent to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' (Portuguese as spoken in Portugal) in this context. 1.4 Translating Teams ===================== For the Free Translation Project to be a success, we need interested people who like their own language and write it well, and who are also able to synergize with other translators speaking the same language. Each translation team has its own mailing list. The up-to-date list of teams can be found at the Free Translation Project's homepage, `http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams" area. If you'd like to volunteer to _work_ at translating messages, you should become a member of the translating team for your own language. The subscribing address is _not_ the same as the list itself, it has `-request' appended. For example, speakers of Swedish can send a message to `sv-request@li.org', having this message body: subscribe Keep in mind that team members are expected to participate _actively_ in translations, or at solving translational difficulties, rather than merely lurking around. If your team does not exist yet and you want to start one, or if you are unsure about what to do or how to get started, please write to `translation@iro.umontreal.ca' to reach the coordinator for all translator teams. The English team is special. It works at improving and uniformizing the terminology in use. Proven linguistic skill are praised more than programming skill, here. 1.5 Available Packages ====================== Languages are not equally supported in all packages. The following matrix shows the current state of internationalization, as of April 2005. The matrix shows, in regard of each package, for which languages PO files have been submitted to translation coordination, with a translation percentage of at least 50%. Ready PO files af am ar az be bg bs ca cs cy da de el en en_GB +-------------------------------------------------+ GNUnet | | a2ps | [] [] [] [] [] | aegis | () | ant-phone | () | anubis | [] | ap-utils | | aspell | [] [] [] [] | bash | [] [] | batchelor | [] | bfd | | bibshelf | [] | binutils | [] | bison | [] [] | bluez-pin | [] [] [] [] | clisp | [] [] | console-tools | [] [] | coreutils | [] [] [] [] | cpio | | cpplib | [] [] [] | darkstat | [] () [] | dialog | [] [] [] [] [] [] | diffutils | [] [] [] [] [] | doodle | [] | e2fsprogs | [] [] | enscript | [] [] [] [] | error | [] [] [] [] | fetchmail | [] () [] [] [] | fileutils | [] [] | findutils | [] [] [] | flex | [] [] [] | fslint | [] | gas | | gawk | [] [] [] | gbiff | [] | gcal | [] | gcc | [] | gettext-examples | [] [] [] [] | gettext-runtime | [] [] [] [] | gettext-tools | [] [] | gimp-print | [] [] [] [] | gip | | gliv | [] | glunarclock | | gmult | [] [] | gnubiff | () | gnucash | [] () () [] | gnucash-glossary | [] () | gpe-aerial | [] [] | gpe-beam | [] [] | gpe-calendar | [] [] | gpe-clock | [] [] | gpe-conf | [] [] | gpe-contacts | | gpe-edit | [] | gpe-go | [] | gpe-login | [] [] | gpe-ownerinfo | [] [] | gpe-sketchbook | [] [] | gpe-su | [] [] | gpe-taskmanager | [] [] | gpe-timesheet | [] | gpe-today | [] [] | gpe-todo | [] [] | gphoto2 | [] [] [] [] | gprof | [] [] | gpsdrive | () () | gramadoir | [] [] | grep | [] [] [] [] [] [] | gretl | | gsasl | [] | gss | | gst-plugins | [] [] [] [] [] [] | gstreamer | [] [] [] [] [] | gtick | [] () | gtkspell | [] [] [] | hello | [] [] [] [] | id-utils | [] [] | impost | | indent | [] [] | iso_3166 | | iso_3166_1 | [] [] [] [] [] | iso_3166_2 | | iso_3166_3 | [] | iso_4217 | | iso_639 | | jpilot | [] | jtag | | jwhois | | kbd | [] [] [] [] | latrine | () | ld | [] | libc | [] [] [] [] [] | libextractor | | libgpewidget | [] [] [] | libgsasl | | libiconv | [] [] [] [] [] | libidn | | lifelines | [] () | lilypond | [] | lingoteach | | lynx | [] [] [] [] | m4 | [] [] [] [] | mailutils | [] | make | [] [] | man-db | [] () [] [] | minicom | [] [] | mysecretdiary | [] [] | nano | [] () [] | nano_1_0 | [] () [] [] | opcodes | [] | parted | [] [] [] [] | psmisc | | ptx | [] [] [] | pwdutils | | python | | radius | [] | recode | [] [] [] [] [] | rpm | [] [] | screem | | scrollkeeper | [] [] [] [] [] [] [] [] | sed | [] [] | sh-utils | [] [] | shared-mime-info | [] [] | sharutils | [] [] [] [] [] | silky | | skencil | [] () | sketch | [] () | solfege | [] | soundtracker | [] [] | sp | [] | stardict | [] | tar | | texinfo | [] [] | textutils | [] [] [] | tin | () () | tp-robot | [] | tuxpaint | [] [] [] [] [] [] [] | unicode-han-tra... | | unicode-transla... | | util-linux | [] [] [] [] | vorbis-tools | [] [] [] [] | wastesedge | () | wdiff | [] [] [] [] | wget | [] [] [] [] [] [] | xchat | [] [] [] [] | xkeyboard-config | | xpad | | +-------------------------------------------------+ af am ar az be bg bs ca cs cy da de el en en_GB 10 0 0 2 7 4 0 41 43 3 52 90 20 1 15 eo es et eu fa fi fr ga gl he hr hu id is it +-----------------------------------------------+ GNUnet | | a2ps | [] [] [] () | aegis | | ant-phone | [] | anubis | [] | ap-utils | [] | aspell | [] [] | bash | [] [] [] [] | batchelor | [] [] | bfd | [] | bibshelf | [] [] [] | binutils | [] [] | bison | [] [] [] [] [] [] | bluez-pin | [] [] [] [] [] [] | clisp | [] [] | console-tools | | coreutils | [] [] [] [] [] | cpio | [] [] | cpplib | [] [] | darkstat | [] () [] [] [] | dialog | [] [] [] [] [] [] [] [] | diffutils | [] [] [] [] [] [] [] [] [] [] | doodle | [] [] | e2fsprogs | [] [] [] | enscript | [] [] | error | [] [] [] [] [] | fetchmail | [] | fileutils | [] [] [] [] [] [] | findutils | [] [] [] [] [] | flex | [] [] [] | fslint | [] | gas | [] [] | gawk | [] [] [] [] | gbiff | [] | gcal | [] [] | gcc | [] | gettext-examples | [] [] [] [] | gettext-runtime | [] [] [] [] [] [] | gettext-tools | [] [] [] | gimp-print | [] [] | gip | [] [] [] | gliv | () | glunarclock | [] [] [] | gmult | [] [] [] | gnubiff | () () | gnucash | [] () [] | gnucash-glossary | [] [] | gpe-aerial | [] [] | gpe-beam | [] [] | gpe-calendar | [] [] [] [] | gpe-clock | [] [] [] | gpe-conf | [] | gpe-contacts | [] | gpe-edit | [] [] | gpe-go | [] [] | gpe-login | [] [] [] | gpe-ownerinfo | [] [] [] [] [] | gpe-sketchbook | [] [] | gpe-su | [] [] [] | gpe-taskmanager | [] [] [] | gpe-timesheet | [] [] [] [] | gpe-today | [] [] [] [] | gpe-todo | [] [] [] | gphoto2 | [] [] [] [] [] | gprof | [] [] [] | gpsdrive | () () [] () | gramadoir | [] [] | grep | [] [] [] [] [] [] [] [] [] [] [] [] | gretl | [] [] [] | gsasl | [] [] [] | gss | [] | gst-plugins | [] [] [] | gstreamer | [] | gtick | [] [] [] [] [] | gtkspell | [] [] [] [] [] [] | hello | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | id-utils | [] [] [] [] | impost | [] [] | indent | [] [] [] [] [] [] [] [] [] [] [] | iso_3166 | [] [] [] | iso_3166_1 | [] [] [] [] [] [] [] | iso_3166_2 | [] | iso_3166_3 | [] | iso_4217 | [] [] [] | iso_639 | [] [] [] [] | jpilot | [] [] | jtag | [] | jwhois | [] [] [] [] [] | kbd | [] [] | latrine | [] [] [] | ld | [] [] | libc | [] [] [] [] [] | libextractor | | libgpewidget | [] [] [] [] [] | libgsasl | [] [] | libiconv | [] [] [] [] [] [] [] [] [] [] [] | libidn | [] [] | lifelines | () | lilypond | [] | lingoteach | [] [] [] | lynx | [] [] [] | m4 | [] [] [] [] | mailutils | [] [] | make | [] [] [] [] [] [] [] | man-db | () | minicom | [] [] [] [] | mysecretdiary | [] [] [] | nano | [] [] () [] [] | nano_1_0 | [] [] [] [] [] | opcodes | [] [] | parted | [] [] [] [] | psmisc | [] [] | ptx | [] [] [] [] [] [] [] [] [] | pwdutils | | python | | radius | [] [] | recode | [] [] [] [] [] [] [] [] | rpm | [] | screem | | scrollkeeper | [] [] [] | sed | [] [] [] [] [] | sh-utils | [] [] [] [] [] [] [] | shared-mime-info | [] [] [] [] [] [] | sharutils | [] [] [] [] [] [] [] | silky | [] | skencil | [] [] | sketch | [] [] | solfege | [] | soundtracker | [] [] [] | sp | [] | stardict | [] | tar | [] [] [] [] [] | texinfo | [] [] [] | textutils | [] [] [] [] [] | tin | [] () | tp-robot | [] [] | tuxpaint | [] [] [] [] [] [] [] [] [] | unicode-han-tra... | | unicode-transla... | [] [] | util-linux | [] [] [] [] [] [] | vorbis-tools | [] [] | wastesedge | () | wdiff | [] [] [] [] [] [] [] [] | wget | [] [] [] [] [] [] [] [] [] [] | xchat | [] [] [] [] [] | xkeyboard-config | | xpad | [] [] [] | +-----------------------------------------------+ eo es et eu fa fi fr ga gl he hr hu id is it 13 85 21 15 2 35 115 45 17 8 6 40 27 1 45 ja ko ku lg lt lv mk mn ms mt nb nl nn no nso +-----------------------------------------------+ GNUnet | | a2ps | () [] [] () | aegis | () | ant-phone | [] | anubis | [] [] [] | ap-utils | | aspell | [] [] | bash | [] | batchelor | [] | bfd | | bibshelf | | binutils | | bison | [] [] [] | bluez-pin | [] | clisp | [] | console-tools | | coreutils | [] [] | cpio | | cpplib | | darkstat | [] [] | dialog | [] | diffutils | [] [] [] | doodle | | e2fsprogs | | enscript | [] | error | [] | fetchmail | [] [] | fileutils | [] [] | findutils | [] | flex | [] [] | fslint | [] | gas | | gawk | [] [] | gbiff | [] | gcal | | gcc | | gettext-examples | [] [] | gettext-runtime | [] [] [] | gettext-tools | [] [] | gimp-print | [] [] | gip | [] | gliv | [] | glunarclock | [] [] | gmult | [] | gnubiff | | gnucash | () () [] | gnucash-glossary | [] | gpe-aerial | [] | gpe-beam | [] | gpe-calendar | [] | gpe-clock | [] | gpe-conf | [] | gpe-contacts | | gpe-edit | [] | gpe-go | [] | gpe-login | [] | gpe-ownerinfo | [] | gpe-sketchbook | [] | gpe-su | [] | gpe-taskmanager | [] [] | gpe-timesheet | [] | gpe-today | [] | gpe-todo | [] | gphoto2 | [] [] | gprof | | gpsdrive | () () () | gramadoir | () | grep | [] [] [] | gretl | | gsasl | [] | gss | | gst-plugins | [] | gstreamer | [] | gtick | [] | gtkspell | [] [] | hello | [] [] [] [] [] [] [] [] | id-utils | [] | impost | | indent | [] [] | iso_3166 | [] | iso_3166_1 | [] [] | iso_3166_2 | [] | iso_3166_3 | [] | iso_4217 | [] [] [] | iso_639 | [] [] [] | jpilot | () () () | jtag | | jwhois | [] | kbd | [] | latrine | [] | ld | | libc | [] [] [] [] [] | libextractor | | libgpewidget | [] | libgsasl | [] | libiconv | [] | libidn | | lifelines | [] | lilypond | [] | lingoteach | [] | lynx | [] [] | m4 | [] [] | mailutils | | make | [] [] [] | man-db | () | minicom | [] | mysecretdiary | [] | nano | [] [] | nano_1_0 | [] [] [] | opcodes | [] | parted | [] [] | psmisc | [] [] | ptx | [] [] [] | pwdutils | | python | | radius | | recode | [] | rpm | [] [] | screem | [] | scrollkeeper | [] [] [] | sed | [] [] | sh-utils | [] [] | shared-mime-info | [] [] [] [] | sharutils | [] [] | silky | [] | skencil | | sketch | | solfege | [] [] | soundtracker | | sp | () | stardict | [] [] | tar | [] [] | texinfo | [] [] [] | textutils | [] [] [] | tin | | tp-robot | [] | tuxpaint | [] [] [] [] [] [] | unicode-han-tra... | | unicode-transla... | | util-linux | [] [] | vorbis-tools | [] | wastesedge | [] | wdiff | [] [] | wget | [] [] | xchat | [] [] [] [] | xkeyboard-config | [] | xpad | [] | +-----------------------------------------------+ ja ko ku lg lt lv mk mn ms mt nb nl nn no nso 33 11 1 1 1 2 2 3 11 0 15 96 7 5 0 or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta +-------------------------------------------------+ GNUnet | | a2ps | () [] [] [] [] [] [] | aegis | () () | ant-phone | [] | anubis | [] [] [] | ap-utils | () | aspell | [] [] | bash | [] [] [] | batchelor | [] | bfd | | bibshelf | | binutils | [] [] | bison | [] [] [] [] [] | bluez-pin | [] [] [] [] [] [] [] [] | clisp | [] | console-tools | [] | coreutils | [] [] [] [] | cpio | [] [] | cpplib | | darkstat | [] [] [] [] [] [] | dialog | [] [] [] [] [] [] [] | diffutils | [] [] [] [] [] [] | doodle | [] | e2fsprogs | [] [] | enscript | [] [] [] [] | error | [] [] [] | fetchmail | [] () [] [] [] | fileutils | [] [] [] [] [] | findutils | [] [] [] [] [] [] | flex | [] [] [] [] [] | fslint | [] [] [] | gas | | gawk | [] [] [] [] | gbiff | [] | gcal | [] | gcc | | gettext-examples | [] [] [] [] [] [] | gettext-runtime | [] [] [] [] [] [] [] | gettext-tools | [] [] [] [] [] [] [] | gimp-print | [] [] | gip | [] [] [] | gliv | [] [] [] | glunarclock | [] [] [] [] [] [] | gmult | [] [] [] [] | gnubiff | () [] | gnucash | () [] [] [] [] | gnucash-glossary | [] [] [] | gpe-aerial | [] [] [] [] [] [] | gpe-beam | [] [] [] [] [] [] | gpe-calendar | [] [] [] [] [] [] [] | gpe-clock | [] [] [] [] [] [] [] | gpe-conf | [] [] [] [] [] [] | gpe-contacts | [] [] [] | gpe-edit | [] [] [] [] [] [] [] | gpe-go | [] [] [] [] [] | gpe-login | [] [] [] [] [] [] [] | gpe-ownerinfo | [] [] [] [] [] [] [] | gpe-sketchbook | [] [] [] [] [] [] [] | gpe-su | [] [] [] [] [] [] [] | gpe-taskmanager | [] [] [] [] [] [] [] | gpe-timesheet | [] [] [] [] [] [] [] | gpe-today | [] [] [] [] [] [] [] | gpe-todo | [] [] [] [] [] [] [] | gphoto2 | [] [] [] [] | gprof | [] [] [] | gpsdrive | [] | gramadoir | [] | grep | [] [] [] [] [] [] [] | gretl | [] | gsasl | [] [] [] [] [] | gss | [] [] [] | gst-plugins | [] [] [] [] | gstreamer | [] [] [] [] | gtick | [] [] [] | gtkspell | [] [] [] [] [] [] | hello | [] [] [] [] [] [] [] | id-utils | [] [] [] [] | impost | | indent | [] [] [] [] [] [] | iso_3166 | [] [] [] [] [] | iso_3166_1 | [] [] [] [] | iso_3166_2 | | iso_3166_3 | [] [] [] | iso_4217 | [] [] | iso_639 | [] [] [] | jpilot | | jtag | [] | jwhois | [] [] [] () () | kbd | [] [] [] | latrine | [] [] | ld | [] | libc | [] [] [] [] [] | libextractor | [] | libgpewidget | [] [] [] [] [] [] | libgsasl | [] [] [] | libiconv | [] [] [] [] [] [] [] [] [] [] | libidn | [] () | lifelines | [] [] | lilypond | [] | lingoteach | [] | lynx | [] [] [] | m4 | [] [] [] [] [] | mailutils | [] [] [] | make | [] [] [] [] | man-db | [] [] | minicom | [] [] [] [] | mysecretdiary | [] [] [] [] | nano | [] [] [] | nano_1_0 | [] [] [] [] | opcodes | [] [] | parted | [] [] [] [] | psmisc | [] [] | ptx | [] [] [] [] [] [] | pwdutils | [] | python | | radius | [] [] | recode | [] [] [] [] [] [] | rpm | [] [] [] [] | screem | | scrollkeeper | [] [] [] [] [] [] [] | sed | [] [] [] [] [] [] [] [] | sh-utils | [] [] [] | shared-mime-info | [] [] [] [] [] | sharutils | [] [] [] | silky | [] | skencil | [] [] [] | sketch | [] [] [] | solfege | | soundtracker | [] [] | sp | | stardict | [] [] | tar | [] [] [] [] | texinfo | [] [] [] [] | textutils | [] [] [] | tin | | tp-robot | [] | tuxpaint | [] [] [] [] [] [] [] [] | unicode-han-tra... | | unicode-transla... | | util-linux | [] [] [] | vorbis-tools | [] [] | wastesedge | | wdiff | [] [] [] [] [] [] | wget | [] [] [] [] [] [] [] [] [] | xchat | [] [] [] [] [] [] | xkeyboard-config | | xpad | | +-------------------------------------------------+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta 1 0 48 30 58 6 79 71 5 45 13 12 50 86 0 tg th tk tr uk ven vi wa xh zh_CN zh_TW zu +--------------------------------------------+ GNUnet | | 0 a2ps | [] [] [] | 19 aegis | | 0 ant-phone | [] | 4 anubis | [] | 9 ap-utils | () | 1 aspell | [] [] [] | 13 bash | | 10 batchelor | [] [] | 7 bfd | | 1 bibshelf | [] | 5 binutils | [] | 6 bison | [] | 17 bluez-pin | [] [] [] [] [] | 24 clisp | | 7 console-tools | [] | 4 coreutils | [] | 16 cpio | [] [] | 6 cpplib | [] [] | 7 darkstat | [] () () | 15 dialog | [] [] [] | 25 diffutils | [] [] [] [] | 28 doodle | [] | 5 e2fsprogs | [] | 8 enscript | [] | 12 error | [] [] [] | 16 fetchmail | [] | 12 fileutils | [] [] [] | 18 findutils | [] [] | 17 flex | [] [] | 15 fslint | [] | 7 gas | [] | 3 gawk | [] | 14 gbiff | | 4 gcal | [] | 5 gcc | [] | 3 gettext-examples | [] [] [] [] | 20 gettext-runtime | [] [] [] [] [] | 25 gettext-tools | [] [] [] | 17 gimp-print | [] | 11 gip | [] | 8 gliv | [] | 6 glunarclock | [] [] | 13 gmult | [] [] [] | 13 gnubiff | [] | 3 gnucash | () [] | 10 gnucash-glossary | [] | 8 gpe-aerial | [] [] | 13 gpe-beam | [] [] | 13 gpe-calendar | [] [] [] [] | 18 gpe-clock | [] [] [] [] | 17 gpe-conf | [] [] | 12 gpe-contacts | [] [] | 6 gpe-edit | [] [] [] [] | 15 gpe-go | [] [] | 11 gpe-login | [] [] [] [] [] | 18 gpe-ownerinfo | [] [] [] [] | 19 gpe-sketchbook | [] [] | 14 gpe-su | [] [] [] | 16 gpe-taskmanager | [] [] [] | 17 gpe-timesheet | [] [] [] [] | 17 gpe-today | [] [] [] [] [] | 19 gpe-todo | [] [] [] | 16 gphoto2 | [] [] | 17 gprof | [] [] | 10 gpsdrive | | 2 gramadoir | [] | 6 grep | [] [] [] [] | 32 gretl | | 4 gsasl | [] [] | 12 gss | [] | 5 gst-plugins | [] [] | 16 gstreamer | [] [] [] | 14 gtick | [] | 11 gtkspell | [] [] [] | 20 hello | [] [] [] [] | 37 id-utils | [] [] | 13 impost | [] | 3 indent | [] [] [] | 24 iso_3166 | [] [] [] | 12 iso_3166_1 | [] [] | 20 iso_3166_2 | | 2 iso_3166_3 | [] [] | 8 iso_4217 | [] [] | 10 iso_639 | [] [] | 12 jpilot | [] [] [] | 6 jtag | | 2 jwhois | [] [] [] | 12 kbd | [] [] | 12 latrine | [] [] | 8 ld | [] | 5 libc | [] [] | 22 libextractor | | 1 libgpewidget | [] [] | 17 libgsasl | [] | 7 libiconv | [] [] [] [] [] | 32 libidn | [] [] | 5 lifelines | | 4 lilypond | [] | 5 lingoteach | | 5 lynx | [] [] | 14 m4 | [] [] | 17 mailutils | [] | 7 make | [] [] | 18 man-db | | 5 minicom | | 11 mysecretdiary | [] [] | 12 nano | | 11 nano_1_0 | [] [] | 17 opcodes | [] | 7 parted | [] [] [] | 17 psmisc | [] | 7 ptx | [] [] | 23 pwdutils | | 1 python | | 0 radius | [] | 6 recode | [] [] | 22 rpm | [] [] | 11 screem | | 1 scrollkeeper | [] [] | 23 sed | [] [] | 19 sh-utils | [] | 15 shared-mime-info | [] [] | 19 sharutils | [] [] [] | 20 silky | | 3 skencil | | 6 sketch | | 6 solfege | | 4 soundtracker | [] | 8 sp | [] | 3 stardict | [] [] [] [] | 10 tar | [] [] | 13 texinfo | [] [] | 14 textutils | [] [] [] | 17 tin | | 1 tp-robot | [] [] | 7 tuxpaint | [] [] [] [] | 34 unicode-han-tra... | | 0 unicode-transla... | | 2 util-linux | [] [] | 17 vorbis-tools | [] | 10 wastesedge | | 1 wdiff | [] [] | 22 wget | [] [] [] [] | 31 xchat | [] [] [] | 22 xkeyboard-config | | 1 xpad | [] | 5 +--------------------------------------------+ 72 teams tg th tk tr uk ven vi wa xh zh_CN zh_TW zu 147 domains 0 0 1 78 29 0 71 16 0 41 20 0 1711 Some counters in the preceding matrix are higher than the number of visible blocks let us expect. This is because a few extra PO files are used for implementing regional variants of languages, or language dialects. For a PO file in the matrix above to be effective, the package to which it applies should also have been internationalized and distributed as such by its maintainer. There might be an observable lag between the mere existence a PO file and its wide availability in a distribution. If April 2005 seems to be old, you may fetch a more recent copy of this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix with full percentage details can be found at `http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'. 1.6 Using `gettext' in new packages =================================== If you are writing a freely available program and want to internationalize it you are welcome to use GNU `gettext' in your package. Of course you have to respect the GNU Library General Public License which covers the use of the GNU `gettext' library. This means in particular that even non-free programs can use `libintl' as a shared library, whereas only free software can use `libintl' as a static library or use modified versions of `libintl'. Once the sources are changed appropriately and the setup can handle the use of `gettext' the only thing missing are the translations. The Free Translation Project is also available for packages which are not developed inside the GNU project. Therefore the information given above applies also for every other Free Software Project. Contact `translation@iro.umontreal.ca' to make the `.pot' files available to the translation teams. abook-0.6.0pre2/AUTHORS000644 000764 000764 00000000767 10475264457 015253 0ustar00jaakkojaakko000000 000000 abook AUTHORS ------------- Jaakko Heinonen Cedric Duval - views - i18n - etc. Alan Ford - Debian package - manual pages - GnomeCard, csv, text, elm export filters - etc. Josua Groeger - spruce export filter - text export filter update Matt Kraai - patches Koenraad Heijlen - csv import filter - palmcsv export filter - fixes abook-0.6.0pre2/COPYING000644 000764 000764 00000043105 07253120445 015213 0ustar00jaakkojaakko000000 000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) 19yy This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19yy name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. abook-0.6.0pre2/ChangeLog000644 000764 000764 00000017410 10477545655 015752 0ustar00jaakkojaakko000000 000000 0.6.0 - configurable views (Cedric Duval) - new field types, lists and improved custom field support (Cedric Duval) - index_format option (Cedric Duval) - Italian translation (Claudio Stazzone) - BSD calendar export filter (Guillem Jover) - translation updates - bugfixes 0.5.6 - translation fixes - fixed gcrd export format (\r\n line endings according to RFC, Marc Tardif) - fix localized keybindings with --disable-nls 0.5.5 - fixed gcrd export format (Marc Tardif) - i18n support (Cedric Duval) - French translation (Cedric Duval) - Swedish translation (Susanna Björverud) - Japanese translation (Takahashi Tamotsu) - German translation (Johannes Weißl) - palmcsv import filter (Marc Tardif) - use better common code for csv filters (Marc Tardif) - translation HOWTO (Cedric Duval) - wanderlust export filter (Josef Schugt) - create a backup at save time - editor undo fix - ui_readline limit fix 0.5.4 - add show_cursor config option (idea from Cheryl Homiak) - autoconf/automake update - replace abook_malloc, abook_realloc and my_free with new xmalloc routines - replace strdup with xstrdup - update for abook_rl (abook_readline) - make it compile with tcc (Tiny C Compiler) - code cleanups and minor fixes 0.5.3 - add allcvs filters (Christoph Sobotka) - removed a lefover debug message - fixed mutt import filter nickname cutoff - wrap searches - contrib updates 0.5.2 - five custom fields added - experimental wide character support - fixed a crash bug in mutt filter - fixed errors in configure.in (especially snprintf-functions were incorrectly detected) - abookrc manual page update 0.5.1 - sort by field command - duplicate item command - quit without saving command - autoconf/automake update - minor filter fixes - tried to fix \" quotation problem with mutt import filter - removed obsolete filesel_sort option from abookrc manual page - added bbdb2xx translator source to contrib 0.5.0 - tried to work around some problems with readline - some documentation update 20030530 - updated autoconf/automake - updated man page - pine import filter update 20021008 - options.c rewritten (new mutt style rc file support) - palmcsv export filter (Koenraad Heijlen) - added a spec file for rpm support - added --with-readline configure option - merged newtab patch by Sinan Kaan Yerli - new option: add_email_prevent_duplicates - bugfixes 2002-03-11 - readline support - abook can be compiled with g++ - attempt to improve --datafile behavior - html filter update (Morten Brix Pedersen) - store rcfile and addressbook to .abook directory 2002-02-04 - use getopt to parse command line (also new options added) - use strcoll instead of strcmp for sorting entries - html filter fix - bugfixes 0.4.17 - fixed an annoying file creation bug 0.4.16 - use strcoll instead of strcmp for sorting entries - html filter fix - many bugfixes 0.4.15 - new options --add-email and --add-email-quiet - proper mutt alias import filter - editor update - don't handle extra_column and extra_alternative as numbers in abookrc - added second address field - mail.vim update in contrib directory 0.4.14 - added csv import filter - csv export filter fix - minor html filter update - fixed a minor memory leak in pine import filter - filter cleanups - fixes - "quit and print selected item(s) to stderr" command (Brian Medley) - contrib update 0.4.13 - major code reorganization (phase 1) - fixed help viewer functions - ability to disable use of non-ascii characters (configuration option) - changed SIGINT behaviour - html export filter creates now valid html documents - ability to print/export only selected items - new editor commands - text filter update - query/find code cleanup - fixed snprintf related bugs - minor bugfixes 0.4.12 - added man page for abookrc (Alan Ford) - notes are returned as optional data in mutt queries - created a workaround for a mutt query bug - new "extra_alternative" config option (Alan) - added undo feature to editor - FAQ - macro updates - fixed the cancel key behavior in editor 0.4.11 - new configuration file format - new sorting routines - minor mutt query patch (Matt) - html filter update - added mail2abook.py script to improve the mutt integration - memory allocation changes - contrib update 0.4.10 - mutt alias import filter - --datafile option should work better now - merged HPUX patch (submitted by Matt Kraai) - added field for nickname/alias - bugfixes 0.4.9 - increased the maximum length of an e-mail address - added Spruce and ldif export filters - text filter update - added support for systemwide configuration file (/etc/abook.conf) - list.c cleanup - minor fixes 0.4.8 - new enter_string function (scrollable input) - fileselector - new fields for phone numbers - extra field support - added open database command and --datafile option 0.4.7 - fixed terminal resizing bug - new man page - fixed "roll emails" bug - merged Alan's urlview patch - fixed some compile warnings on some systems 0.4.6 - new proper ldif import filter - printing - GnomeCard export filter - improved ui - csv export filter - elm alias export filter - plain text export filter - improved import / export system - a man page (contributed by Alan Ford) - some fixes 0.4.5 - new command line option --convert to make format conversions - new common functions for filters - mutt alias export filter - minor filter updates - fixed a compile problem in list.c 0.4.4 - fixed a serious segfault bug in editor - conff.c update 0.4.3 - improved "send mail with mutt" command - optimized screen refreshing - abook handles now SIGINT, SIGKILL, SIGTERM signals 0.4.2 - new editor - added fields for address (address, city, state, zip, country) - terminal resizing is now handled by abook - improved scrolling - bugfixes - dropped support for abook 0.1 / 0.2 file format 0.4.1 - fixed a redraw bug in editor which occurred only with old ncurses library - minor updates 0.4.0 - PINE addressbook import and export filters added - new faster load and save functions - changed memory allocation method - better configuration system - options.c rewritten - new version of conff.c - find segfault bug fixed - fixed overwriting policy 0.3.1 - fixed a bug which caused list to disappear sometimes after removing items - minor changes in datafile loader - abook.gz import filter is now disabled as default 0.3.0 - new portable file format - import filter for old data format - now compiles on FreeBSD - new "send mail with mutt" command - multiple e-mail address support - html export filter - improved cursor behavior - fixed misc.c - new configuration system ( ~/.abook.conf ) - improved memory allocation functions - added invert selection command - minor filter updates 0.2.4 - minor memory freeing fix 0.2.3 - major memory allocation bugfix 0.2.2 - bugfixes 0.2.1 - abook finaly uses automake/autoconf setup - documentation updated - minor changes 0.2.0 - multiple selection - added find function - ldif import filter update (still some bugs?) - added check for terminal size - removed obsolete rcfile code - some changes in list.c - new file: help.h - Makefiles modified - complete rewrote of misc.c - fixed a bug in mutt query - changed first_item to first_list_item and LAST_ITEM to LAST_LIST_ITEM - lots of minor improvements - documentation updated (it's still very bad) 0.1.0 - removed dummy defaultrc.h file - README and COPYING - minor ldif import filter update - minor changes and fixes 0.1.0-pre-release 2 - locale support - mutt query now ignores case - rcfile support is compiled only if -DEXPERIMENTAL option is selected (see Makefile) because the rcfile support is very poor and should be rewritten for 0.2 or something - new file: defaultrc.h 0.1.0-pre-release 1 abook-0.6.0pre2/INSTALL000644 000764 000764 00000017227 07253120446 015220 0ustar00jaakkojaakko000000 000000 Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.in' is used to create `configure' by a program called `autoconf'. You only need `configure.in' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=PATH' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are building compiler tools for cross-compiling, you can also use the `--target=TYPE' option to select the type of system they will produce code for and the `--build=TYPE' option to select the type of system on which you are compiling the package. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. abook-0.6.0pre2/NEWS000644 000764 000764 00000000016 10272350126 014645 0ustar00jaakkojaakko000000 000000 See ChangeLog abook-0.6.0pre2/THANKS000644 000764 000764 00000000566 10477555302 015105 0ustar00jaakkojaakko000000 000000 abook THANKS ------------ Michael Wiedmann Brian Salter-Duke An Thi-Nguyen Le Reinhard J Sammer Matt Anderson R. Shohn Trojacek Shao Zhang Gustavo Niemeyer Brian Medley Takahashi Tamotsu Liam K Morland Cheryl Homiak Christoph Sobotka Morten Brix Pedersen Jeff Covey Giuseppe Corbelli Mariusz Balewski Marc Tardif Gerfried Fuchs Josef Schugt Guillem Jover See also AUTHORS abook-0.6.0pre2/TODO000644 000764 000764 00000000164 10477233220 014644 0ustar00jaakkojaakko000000 000000 0.6 - allcsv should export all fields generic: - grouping - new file format (xml?) - custom views, keybindings abook-0.6.0pre2/config.guess000644 000764 000764 00000126051 10464725617 016511 0ustar00jaakkojaakko000000 000000 #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. timestamp='2006-02-23' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerppc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:MSYS_NT-*:*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; x86:Interix*:[345]*) echo i586-pc-interix${UNAME_RELEASE} exit ;; EM64T:Interix*:[345]*) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips64 #undef mips64el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mips64el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips64 #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun) LIBC=gnu #else LIBC=gnuaout #endif #endif #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^LIBC/{ s: ::g p }'`" test x"${LIBC}" != x && { echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit } test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: abook-0.6.0pre2/config.rpath000755 000764 000764 00000035025 10312765621 016473 0ustar00jaakkojaakko000000 000000 #! /bin/sh # Output a system dependent set of variables, describing how to set the # run time search path of shared libraries in an executable. # # Copyright 1996-2005 Free Software Foundation, Inc. # Taken from GNU libtool, 2001 # Originally by Gordon Matzigkeit , 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # # The first argument passed to this file is the canonical host specification, # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld # should be set by the caller. # # The set of defined variables is at the end of this script. # Known limitations: # - On IRIX 6.5 with CC="cc", the run time search patch must not be longer # than 256 bytes, otherwise the compiler driver will dump core. The only # known workaround is to choose shorter directory names for the build # directory and/or the installation directory. # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a shrext=.so host="$1" host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` cc_basename=`echo "$CC" | sed -e 's%^.*/%%'` # Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC. wl= if test "$GCC" = yes; then wl='-Wl,' else case "$host_os" in aix*) wl='-Wl,' ;; darwin*) case "$cc_basename" in xlc*) wl='-Wl,' ;; esac ;; mingw* | pw32* | os2*) ;; hpux9* | hpux10* | hpux11*) wl='-Wl,' ;; irix5* | irix6* | nonstopux*) wl='-Wl,' ;; newsos6) ;; linux*) case $cc_basename in icc* | ecc*) wl='-Wl,' ;; pgcc | pgf77 | pgf90) wl='-Wl,' ;; ccc*) wl='-Wl,' ;; como) wl='-lopt=' ;; esac ;; osf3* | osf4* | osf5*) wl='-Wl,' ;; sco3.2v5*) ;; solaris*) wl='-Wl,' ;; sunos4*) wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) wl='-Wl,' ;; sysv4*MP*) ;; unicos*) wl='-Wl,' ;; uts4*) ;; esac fi # Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS. hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no case "$host_os" in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then case "$host_os" in aix3* | aix4* | aix5*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we cannot use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then : else ld_shlibs=no fi ;; netbsd*) ;; solaris* | sysv5*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs=no elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; sunos4*) hardcode_direct=yes ;; linux*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then # Unlike libtool, we use -rpath here, not --rpath, since the documented # option of GNU ld is called -rpath, not --rpath. hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' fi else case "$host_os" in aix3*) # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac fi hardcode_direct=yes hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac fi # Begin _LT_AC_SYS_LIBPATH_AIX. echo 'int main () { return 0; }' > conftest.c ${CC} ${LDFLAGS} conftest.c -o conftest aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` fi if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib" fi rm -f conftest.c conftest # End _LT_AC_SYS_LIBPATH_AIX. if test "$aix_use_runtimelinking" = yes; then hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' else hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" fi fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; bsdi[45]*) ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' libext=lib ;; darwin* | rhapsody*) hardcode_direct=no if test "$GCC" = yes ; then : else case "$cc_basename" in xlc*) ;; *) ld_shlibs=no ;; esac fi ;; dgux*) hardcode_libdir_flag_spec='-L$libdir' ;; freebsd1*) ld_shlibs=no ;; freebsd2.2*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; freebsd2*) hardcode_direct=yes hardcode_minus_L=yes ;; freebsd* | kfreebsd*-gnu | dragonfly*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; hpux9*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; hpux10* | hpux11*) if test "$with_gnu_ld" = no; then case "$host_cpu" in hppa*64*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=no ;; ia64*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=no # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; *) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; netbsd*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; newsos6) hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; openbsd*) hardcode_direct=yes if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then hardcode_libdir_flag_spec='${wl}-rpath,$libdir' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) hardcode_libdir_flag_spec='-R$libdir' ;; *) hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; osf3*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) if test "$GCC" = yes; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else # Both cc and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; sco3.2v5*) ;; solaris*) hardcode_libdir_flag_spec='-R$libdir' ;; sunos4*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes ;; sysv4) case $host_vendor in sni) hardcode_direct=yes # is this really true??? ;; siemens) hardcode_direct=no ;; motorola) hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac ;; sysv4.3*) ;; sysv4*MP*) if test -d /usr/nec; then ld_shlibs=yes fi ;; sysv4.2uw2*) hardcode_direct=yes hardcode_minus_L=no ;; sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) ;; sysv5*) hardcode_libdir_flag_spec= ;; uts4*) hardcode_libdir_flag_spec='-L$libdir' ;; *) ld_shlibs=no ;; esac fi # Check dynamic linker characteristics # Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER. libname_spec='lib$name' case "$host_os" in aix3*) ;; aix4* | aix5*) ;; amigaos*) ;; beos*) ;; bsdi[45]*) ;; cygwin* | mingw* | pw32*) shrext=.dll ;; darwin* | rhapsody*) shrext=.dylib ;; dgux*) ;; freebsd1*) ;; kfreebsd*-gnu) ;; freebsd*) ;; gnu*) ;; hpux9* | hpux10* | hpux11*) case "$host_cpu" in ia64*) shrext=.so ;; hppa*64*) shrext=.sl ;; *) shrext=.sl ;; esac ;; irix5* | irix6* | nonstopux*) case "$host_os" in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; *) libsuff= shlibsuff= ;; esac ;; esac ;; linux*oldld* | linux*aout* | linux*coff*) ;; linux*) ;; knetbsd*-gnu) ;; netbsd*) ;; newsos6) ;; nto-qnx*) ;; openbsd*) ;; os2*) libname_spec='$name' shrext=.dll ;; osf3* | osf4* | osf5*) ;; sco3.2v5*) ;; solaris*) ;; sunos4*) ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ;; sysv4*MP*) ;; uts4*) ;; esac sed_quote_subst='s/\(["`$\\]\)/\\\1/g' escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` shlibext=`echo "$shrext" | sed -e 's,^\.,,'` escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64vr | mips64vrel \ | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | mt \ | msp430 \ | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m32c) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64vr-* | mips64vrel-* \ | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ | xstormy16-* | xtensa-* \ | ymp-* \ | z8k-*) ;; m32c-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; c90) basic_machine=c90-cray os=-unicos ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16c) basic_machine=cr16c-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: abook-0.6.0pre2/depcomp000755 000764 000764 00000027525 07356401762 015555 0ustar00jaakkojaakko000000 000000 #! /bin/sh # depcomp - compile a program generating dependencies as side-effects # Copyright 1999, 2000 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # `libtool' can also be set to `yes' or `no'. depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. This file always lives in the current directory. # Also, the AIX compiler puts `$object:' at the start of each line; # $object doesn't have directory information. stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" outname="$stripped.o" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; tru64) # The Tru64 AIX compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. tmpdepfile1="$object.d" tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` if test "$libtool" = yes; then "$@" -Wc,-MD else "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi if test -f "$tmpdepfile1"; then tmpdepfile="$tmpdepfile1" else tmpdepfile="$tmpdepfile2" fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a space and a tab in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. test -z "$dashmflag" && dashmflag=-M ( IFS=" " case " $* " in *" --mode=compile "*) # this is libtool, let us make it quiet for arg do # cycle over the arguments case "$arg" in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) # X makedepend ( shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift;; -*) ;; *) set fnord "$@" "$arg"; shift;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tail +3 "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. ( IFS=" " case " $* " in *" --mode=compile "*) for arg do # cycle over the arguments case $arg in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. ( IFS=" " case " $* " in *" --mode=compile "*) for arg do # cycle over the arguments case $arg in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 abook-0.6.0pre2/install-sh000755 000764 000764 00000012720 07253120476 016167 0ustar00jaakkojaakko000000 000000 #!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 abook-0.6.0pre2/missing000755 000764 000764 00000021231 07356402131 015552 0ustar00jaakkojaakko000000 000000 #! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing 0.3 - GNU automake" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar ${1+"$@"} && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar ${1+"$@"} && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" ${1+"$@"} && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" ${1+"$@"} && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequirements for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 abook-0.6.0pre2/mkinstalldirs000755 000764 000764 00000001340 07253120477 016766 0ustar00jaakkojaakko000000 000000 #! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain # $Id: mkinstalldirs,v 1.1.1.1 2001/03/12 10:13:19 jheinonen Exp $ errstatus=0 for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case "$pathcomp" in -* ) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" 1>&2 mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr fi fi pathcomp="$pathcomp/" done done exit $errstatus # mkinstalldirs ends here abook-0.6.0pre2/abook.c000644 000764 000764 00000036013 10477076534 015432 0ustar00jaakkojaakko000000 000000 /* * $Id: abook.c,v 1.60 2006/09/04 18:29:24 cduval Exp $ * * by JH * * Copyright (C) Jaakko Heinonen */ #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H # include "config.h" #endif #if defined(HAVE_LOCALE_H) && defined(HAVE_SETLOCALE) # include #endif #include #include "abook.h" #include "gettext.h" #include "ui.h" #include "database.h" #include "list.h" #include "filter.h" #include "edit.h" #include "misc.h" #include "options.h" #include "getname.h" #include "getopt.h" #include "views.h" #include "xmalloc.h" static void init_abook(); static void quit_abook_sig(int i); static void set_filenames(); static void parse_command_line(int argc, char **argv); static void show_usage(); static void mutt_query(char *str); static void init_mutt_query(); static void convert(char *srcformat, char *srcfile, char *dstformat, char *dstfile); static void add_email(int); char *datafile = NULL; static char *rcfile = NULL; bool alternative_datafile = FALSE; bool alternative_rcfile = FALSE; static int datafile_writeable() { FILE *f; assert(datafile != NULL); if( (f = fopen(datafile, "a")) == NULL) return FALSE; fclose(f); return TRUE; } static void check_abook_directory() { struct stat s; char *dir; assert(!is_ui_initialized()); if(alternative_datafile) return; dir = strconcat(getenv("HOME"), "/" DIR_IN_HOME, NULL); assert(dir != NULL); if(stat(dir, &s) == -1) { if(errno != ENOENT) { perror(dir); free(dir); exit(EXIT_FAILURE); } if(mkdir(dir, 0700) == -1) { printf(_("Cannot create directory %s\n"), dir); perror(dir); free(dir); exit(EXIT_FAILURE); } } else if(!S_ISDIR(s.st_mode)) { printf(_("%s is not a directory\n"), dir); free(dir); exit(EXIT_FAILURE); } free(dir); } static void xmalloc_error_handler(int err) { /* * We don't try to save addressbook here because we don't know * if it's fully loaded to memory. */ if(is_ui_initialized()) close_ui(); fprintf(stderr, _("Memory allocation failure: %s\n"), strerror(err)); exit(EXIT_FAILURE); } static void init_abook() { set_filenames(); check_abook_directory(); init_opts(); if(load_opts(rcfile) > 0) { printf(_("Press enter to continue...\n")); fgetc(stdin); } init_default_views(); signal(SIGTERM, quit_abook_sig); init_index(); if(init_ui()) exit(EXIT_FAILURE); umask(DEFAULT_UMASK); if(!datafile_writeable()) { char *s = strdup_printf(_("File %s is not writeable"), datafile); refresh_screen(); statusline_msg(s); free(s); if(load_database(datafile) || !statusline_ask_boolean( _("If you continue all changes will " "be lost. Do you want to continue?"), FALSE)) { free_opts(); /*close_database();*/ close_ui(); exit(EXIT_FAILURE); } } else load_database(datafile); refresh_screen(); } void quit_abook(int save_db) { if(save_db) { if(opt_get_bool(BOOL_AUTOSAVE)) save_database(); else if(statusline_ask_boolean(_("Save database"), TRUE)) save_database(); } else if(!statusline_ask_boolean(_("Quit without saving"), FALSE)) return; free_opts(); close_database(); close_ui(); exit(EXIT_SUCCESS); } static void quit_abook_sig(int i) { quit_abook(QUIT_SAVE); } int main(int argc, char **argv) { #if defined(HAVE_SETLOCALE) && defined(HAVE_LOCALE_H) setlocale(LC_ALL, ""); #endif bindtextdomain(PACKAGE, LOCALEDIR); textdomain(PACKAGE); xmalloc_set_error_handler(xmalloc_error_handler); prepare_database_internals(); parse_command_line(argc, argv); init_abook(); get_commands(); quit_abook(QUIT_SAVE); return 0; } static void free_filenames() { xfree(rcfile); xfree(datafile); } static void set_filenames() { struct stat s; if( (stat(getenv("HOME"), &s)) == -1 || ! S_ISDIR(s.st_mode) ) { fprintf(stderr,_("%s is not a valid HOME directory\n"), getenv("HOME") ); exit(EXIT_FAILURE); } if(!datafile) datafile = strconcat(getenv("HOME"), "/" DIR_IN_HOME "/" DATAFILE, NULL); if(!rcfile) rcfile = strconcat(getenv("HOME"), "/" DIR_IN_HOME "/" RCFILE, NULL); atexit(free_filenames); } /* * CLI */ enum { MODE_CONT, MODE_ADD_EMAIL, MODE_ADD_EMAIL_QUIET, MODE_QUERY, MODE_CONVERT }; static void change_mode(int *current, int mode) { if(*current != MODE_CONT) { fprintf(stderr, _("Cannot combine options --mutt-query, " "--convert, " "--add-email or --add-email-quiet\n")); exit(EXIT_FAILURE); } *current = mode; } void set_filename(char **var, char *path) { char *cwd; assert(var != NULL); assert(*var == NULL); /* or else we probably leak memory */ assert(path != NULL); if(*path == '/') { *var = xstrdup(path); return; } cwd = my_getcwd(); *var = strconcat(cwd, "/", path, NULL); free(cwd); } #define set_convert_var(X) do { if(mode != MODE_CONVERT) {\ fprintf(stderr, _("please use option --%s after --convert option\n"),\ long_options[option_index].name);\ exit(EXIT_FAILURE);\ } else\ X = optarg;\ } while(0) static void parse_command_line(int argc, char **argv) { int mode = MODE_CONT; char *query_string = NULL; char *informat = "abook", *outformat = "text", *infile = "-", *outfile = "-"; int c; for(;;) { int option_index = 0; enum { OPT_ADD_EMAIL, OPT_ADD_EMAIL_QUIET, OPT_MUTT_QUERY, OPT_CONVERT, OPT_INFORMAT, OPT_OUTFORMAT, OPT_INFILE, OPT_OUTFILE, OPT_FORMATS }; static struct option long_options[] = { { "help", 0, 0, 'h' }, { "add-email", 0, 0, OPT_ADD_EMAIL }, { "add-email-quiet", 0, 0, OPT_ADD_EMAIL_QUIET }, { "datafile", 1, 0, 'f' }, { "mutt-query", 1, 0, OPT_MUTT_QUERY }, { "config", 1, 0, 'C' }, { "convert", 0, 0, OPT_CONVERT }, { "informat", 1, 0, OPT_INFORMAT }, { "outformat", 1, 0, OPT_OUTFORMAT }, { "infile", 1, 0, OPT_INFILE }, { "outfile", 1, 0, OPT_OUTFILE }, { "formats", 0, 0, OPT_FORMATS }, { 0, 0, 0, 0 } }; c = getopt_long(argc, argv, "hC:", long_options, &option_index); if(c == -1) break; switch(c) { case 'h': show_usage(); exit(EXIT_SUCCESS); case OPT_ADD_EMAIL: change_mode(&mode, MODE_ADD_EMAIL); break; case OPT_ADD_EMAIL_QUIET: change_mode(&mode, MODE_ADD_EMAIL_QUIET); break; case 'f': set_filename(&datafile, optarg); alternative_datafile = TRUE; break; case OPT_MUTT_QUERY: query_string = optarg; change_mode(&mode, MODE_QUERY); break; case 'C': set_filename(&rcfile, optarg); alternative_rcfile = TRUE; break; case OPT_CONVERT: change_mode(&mode, MODE_CONVERT); break; case OPT_INFORMAT: set_convert_var(informat); break; case OPT_OUTFORMAT: set_convert_var(outformat); break; case OPT_INFILE: set_convert_var(infile); break; case OPT_OUTFILE: set_convert_var(outfile); break; case OPT_FORMATS: print_filters(); exit(EXIT_SUCCESS); default: exit(EXIT_FAILURE); } } if(optind < argc) { fprintf(stderr, _("%s: unrecognized arguments on command line\n"), argv[0]); exit(EXIT_FAILURE); } switch(mode) { case MODE_ADD_EMAIL: add_email(0); case MODE_ADD_EMAIL_QUIET: add_email(1); case MODE_QUERY: mutt_query(query_string); case MODE_CONVERT: convert(informat, infile, outformat, outfile); } } static void show_usage() { puts (PACKAGE " v " VERSION "\n"); puts (_(" -h --help show usage")); puts (_(" -C --config use an alternative configuration file")); puts (_(" --datafile use an alternative addressbook file")); puts (_(" --mutt-query make a query for mutt")); puts (_(" --add-email " "read an e-mail message from stdin and\n" " " "add the sender to the addressbook")); puts (_(" --add-email-quiet " "same as --add-email but doesn't\n" " require to confirm adding")); putchar('\n'); puts (_(" --convert convert address book files")); puts (_(" options to use with --convert:")); puts (_(" --informat format for input file")); puts (_(" (default: abook)")); puts (_(" --infile source file")); puts (_(" (default: stdin)")); puts (_(" --outformat format for output file")); puts (_(" (default: text)")); puts (_(" --outfile destination file")); puts (_(" (default: stdout)")); puts (_(" --formats list available formats")); } /* * end of CLI */ static void quit_mutt_query(int status) { close_database(); free_opts(); exit(status); } static void muttq_print_item(FILE *file, int item) { abook_list *emails, *e; char *tmp = db_email_get(item); emails = csv_to_abook_list(tmp); free(tmp); for(e = emails; e; e = e->next) { fprintf(file, "%s\t%s\t%s\n", e->data, db_name_get(item), !db_fget(item, NOTES) ?" " :db_fget(item, NOTES) ); if(!opt_get_bool(BOOL_MUTT_RETURN_ALL_EMAILS)) break; } abook_list_free(&emails); } static void mutt_query(char *str) { init_mutt_query(); if( str == NULL || !strcasecmp(str, "all") ) { struct db_enumerator e = init_db_enumerator(ENUM_ALL); printf("All items\n"); db_enumerate_items(e) muttq_print_item(stdout, e.item); } else { int search_fields[] = {NAME, EMAIL, NICK, -1}; int i; if( (i = find_item(str, 0, search_fields)) < 0 ) { printf("Not found\n"); quit_mutt_query(EXIT_FAILURE); } putchar('\n'); while(i >= 0) { muttq_print_item(stdout, i); i = find_item(str, i + 1, search_fields); } } quit_mutt_query(EXIT_SUCCESS); } static void init_mutt_query() { set_filenames(); init_opts(); load_opts(rcfile); if( load_database(datafile) ) { printf(_("Cannot open database\n")); quit_mutt_query(EXIT_FAILURE); exit(EXIT_FAILURE); } } static char * make_mailstr(int item) { char email[MAX_EMAIL_LEN]; char *ret; char *name = strdup_printf("\"%s\"", db_name_get(item)); get_first_email(email, item); ret = *email ? strdup_printf("%s <%s>", name, email) : xstrdup(name); free(name); return ret; } void print_stderr(int item) { fprintf (stderr, "%c", '\n'); if( is_valid_item(item) ) muttq_print_item(stderr, item); else { struct db_enumerator e = init_db_enumerator(ENUM_SELECTED); db_enumerate_items(e) { muttq_print_item(stderr, e.item); } } } void launch_mutt(int item) { char *cmd = NULL, *mailstr = NULL; char *mutt_command = opt_get_str(STR_MUTT_COMMAND); if(mutt_command == NULL || !*mutt_command) return; if( is_valid_item(item) ) mailstr = make_mailstr(item); else { struct db_enumerator e = init_db_enumerator(ENUM_SELECTED); char *tmp = NULL; db_enumerate_items(e) { tmp = mailstr; mailstr = tmp ? strconcat(tmp, ",", make_mailstr(e.item), NULL): strconcat(make_mailstr(e.item), NULL); free(tmp); } } cmd = strconcat(mutt_command, " \'", mailstr, "\'", NULL); free(mailstr); #ifdef DEBUG fprintf(stderr, "cmd: %s\n", cmd); #endif system(cmd); free(cmd); /* * we need to make sure that curses settings are correct */ ui_init_curses(); } void launch_wwwbrowser(int item) { char *cmd = NULL; if( !is_valid_item(item) ) return; if(db_fget(item, URL)) cmd = strdup_printf("%s '%s'", opt_get_str(STR_WWW_COMMAND), safe_str(db_fget(item, URL))); else return; if ( cmd ) system(cmd); free(cmd); /* * we need to make sure that curses settings are correct */ ui_init_curses(); } FILE * abook_fopen (const char *path, const char *mode) { struct stat s; bool stat_ok; stat_ok = (stat(path, &s) != -1); if(strchr(mode, 'r')) return (stat_ok && S_ISREG(s.st_mode)) ? fopen(path, mode) : NULL; else return (stat_ok && S_ISDIR(s.st_mode)) ? NULL : fopen(path, mode); } static void convert(char *srcformat, char *srcfile, char *dstformat, char *dstfile) { int ret=0; if( !srcformat || !srcfile || !dstformat || !dstfile ) { fprintf(stderr, _("too few arguments to make conversion\n")); fprintf(stderr, _("try --help\n")); } #ifndef DEBUG if( !strcasecmp(srcformat, dstformat) ) { printf( _("input and output formats are the same\n" "exiting...\n")); exit(EXIT_FAILURE); } #endif set_filenames(); init_opts(); load_opts(rcfile); init_standard_fields(); switch(import_file(srcformat, srcfile)) { case -1: fprintf(stderr, _("input format %s not supported\n"), srcformat); ret = 1; break; case 1: fprintf(stderr, _("cannot read file %s\n"), srcfile); ret = 1; break; } if(!ret) switch(export_file(dstformat, dstfile)) { case -1: fprintf(stderr, _("output format %s not supported\n"), dstformat); ret = 1; break; case 1: fprintf(stderr, _("cannot write file %s\n"), dstfile); ret = 1; break; } close_database(); free_opts(); exit(ret); } /* * --add-email handling */ static int add_email_count = 0; static void quit_add_email() { if(add_email_count > 0) { if(save_database() < 0) { fprintf(stderr, _("cannot open %s\n"), datafile); exit(EXIT_FAILURE); } printf(_("%d item(s) added to %s\n"), add_email_count, datafile); } else { puts(_("Valid sender address not found")); } exit(EXIT_SUCCESS); } static void quit_add_email_sig(int signal) { quit_add_email(); } static void init_add_email() { set_filenames(); check_abook_directory(); init_opts(); load_opts(rcfile); atexit(free_opts); /* * we don't actually care if loading fails or not */ load_database(datafile); atexit(close_database); signal(SIGINT, quit_add_email_sig); } static int add_email_add_item(int quiet, char *name, char *email) { list_item item; if(opt_get_bool(BOOL_ADD_EMAIL_PREVENT_DUPLICATES)) { int search_fields[] = { EMAIL, -1 }; if(find_item(email, 0, search_fields) >= 0) { if(!quiet) printf(_("Address %s already in addressbook\n"), email); return 0; } } if(!quiet) { FILE *in = fopen("/dev/tty", "r"); char c; if(!in) { fprintf(stderr, _("cannot open /dev/tty\n" "you may want to use --add-email-quiet\n")); exit(EXIT_FAILURE); } do { printf(_("Add \"%s <%s>\" to %s? (%c/%c)\n"), name, email, datafile, *S_("keybinding for yes|y"), *S_("keybinding for no|n")); c = tolower(getc(in)); if(c == *S_("keybinding for no|n")) { fclose(in); return 0; } } while(c != *S_("keybinding for yes|y")); fclose(in); } item = item_create(); item_fput(item, NAME, xstrdup(name)); item_fput(item, EMAIL, xstrdup(email)); add_item2database(item); item_free(&item); return 1; } static void add_email(int quiet) { char *line; char *name = NULL, *email = NULL; struct stat s; if( (fstat(fileno(stdin), &s)) == -1 || S_ISDIR(s.st_mode) ) { fprintf(stderr, _("stdin is a directory or cannot stat stdin\n")); exit(EXIT_FAILURE); } init_add_email(); do { line = getaline(stdin); if(line && !strncasecmp("From:", line, 5) ) { getname(line, &name, &email); add_email_count += add_email_add_item(quiet, name, email); xfree(name); xfree(email); } xfree(line); } while( !feof(stdin) ); quit_add_email(); } /* * end of --add-email handling */ abook-0.6.0pre2/abook_rl.c000644 000764 000764 00000007144 10315021123 016101 0ustar00jaakkojaakko000000 000000 /* * $Id: abook_rl.c,v 1.16 2005/09/23 15:42:11 jheinonen Exp $ * * by JH * * Copyright (C) Jaakko Heinonen */ #include #include #include #include "abook.h" #include "abook_rl.h" #ifdef HAVE_CONFIG_H # include "config.h" #endif #if defined(HAVE_READLINE_READLINE_H) # include #elif defined(HAVE_READLINE_H) # include #else # error "You don't seem to have readline.h" # error "No HAVE_READLINE_READLINE_H or HAVE_READLINE_H defined" #endif #if defined(HAVE_READLINE_HISTORY_H) # include #elif defined(HAVE_HISTORY_H) # include #else # error "You don't seem to have history.h" # error "No HAVE_READLINE_HISTORY_H or HAVE_HISTORY_H defined" #endif #ifdef HANDLE_MULTIBYTE # include #endif #define RL_READLINE_NAME "Abook" static int rl_x, rl_y; static WINDOW *rl_win; static bool rl_cancelled; static void rl_refresh() { /* refresh(); */ wrefresh(rl_win); } #ifdef HANDLE_MULTIBYTE static int rline_calc_point() { return (int)mbsnwidth(rl_line_buffer, rl_point, 0); } #endif static void rline_update() { #ifdef HANDLE_MULTIBYTE int real_point = rline_calc_point() + rl_x; #else int real_point = rl_point + rl_x; #endif if(real_point > (COLS - 1)) mvwaddnstr(rl_win, rl_y, rl_x, rl_line_buffer + (1 + real_point - COLS), COLS - rl_x - 1); else mvwaddnstr(rl_win, rl_y, rl_x, rl_line_buffer, rl_end); wclrtoeol(rl_win); wmove(rl_win, rl_y, min(real_point, COLS - 1)); rl_refresh(); } static void rline_compdisp(char **matches, int n, int max_len) { /* dummy */ } static void rline_prep_terminal(int dummy) { #if (RL_VERSION_MAJOR == 4 && RL_VERSION_MINOR > 2) || (RL_VERSION_MAJOR > 4) /* nothing */ #else /* * #warning is an extension. Not all compilers support it. */ # ifdef __GNUC__ # warning "You seem to have rather old readline version or \ non-GNU version of it. If you have problems please use \ GNU readline 4.3 or newer. \ GNU readline versions 4.0, 4.1 and 4.2 should be OK despite \ of this warning." # endif /* * this kludge avoids older readline libraries to print a newline */ extern int readline_echoing_p; readline_echoing_p = 0; #endif raw(); keypad(rl_win, FALSE); } static void rline_deprep_terminal(void) { cbreak(); keypad(rl_win, TRUE); } static int rl_cancel(int dummy1, int dummy2) { rl_cancelled = TRUE; rl_done = 1; return 0; } static void abook_rl_init(bool use_completion) { rl_readline_name = RL_READLINE_NAME; #if RL_VERSION_MAJOR >= 4 rl_already_prompted = 1; #endif rl_catch_sigwinch = 0; rl_erase_empty_line = 0; rl_redisplay_function = rline_update; rl_completion_display_matches_hook = rline_compdisp; rl_prep_term_function = rline_prep_terminal; rl_deprep_term_function = rline_deprep_terminal; rl_unbind_function_in_map(rl_clear_screen, rl_get_keymap()); rl_unbind_function_in_map(rl_reverse_search_history, rl_get_keymap()); rl_unbind_function_in_map(rl_re_read_init_file, rl_get_keymap()); if(use_completion) { rl_bind_key('\t', rl_menu_complete); } else { rl_unbind_function_in_map(rl_complete, rl_get_keymap()); rl_unbind_function_in_map(rl_menu_complete, rl_get_keymap()); } rl_bind_key('g' & 31, rl_cancel); /* C-g */ clear_history(); rl_cancelled = FALSE; } char * abook_readline(WINDOW *w, int y, int x, char *s, bool use_completion) { char *ret; abook_rl_init(use_completion); wmove(rl_win = w, rl_y = y, rl_x = x); rl_refresh(); if(s && *s) add_history(s); ret = readline(NULL); if(rl_cancelled && ret) { free(ret); ret = NULL; } return ret; } abook-0.6.0pre2/database.c000644 000764 000764 00000036142 10477076542 016105 0ustar00jaakkojaakko000000 000000 /* * $Id: database.c,v 1.39 2006/09/04 18:29:25 cduval Exp $ * * by JH * * Copyright (C) Jaakko Heinonen */ #include #include #include #include #include #ifdef HAVE_CONFIG_H # include "config.h" #endif #include "abook.h" #include "database.h" #include "gettext.h" #include "list.h" #include "misc.h" #include "xmalloc.h" abook_field_list *fields_list = NULL; int fields_count = 0; list_item *database = NULL; static int items = 0; #define ITEM_SIZE (fields_count * sizeof(char *)) #define LAST_ITEM (items - 1) #define INITIAL_LIST_CAPACITY 30 static int list_capacity = 0; int standard_fields_indexed[ITEM_FIELDS]; /* * notes about adding predefined "standard" fields: * - leave alone "name" and "email" * - reorganize the field numbers in database.h */ abook_field standard_fields[] = { {"name", N_("Name"), FIELD_STRING}, /* NAME */ {"email", N_("E-mail addresses"), FIELD_EMAILS}, /* EMAIL */ {"address", N_("Address"), FIELD_STRING}, /* ADDRESS */ {"address2", N_("Address2"), FIELD_STRING}, /* ADDRESS2 */ {"city", N_("City"), FIELD_STRING}, /* CITY */ {"state", N_("State/Province"), FIELD_STRING}, /* STATE */ {"zip", N_("ZIP/Postal Code"), FIELD_STRING}, /* ZIP */ {"country", N_("Country"), FIELD_STRING}, /* COUNTRY */ {"phone", N_("Home Phone"), FIELD_STRING}, /* PHONE */ {"workphone", N_("Work Phone"), FIELD_STRING}, /* WORKPHONE */ {"fax", N_("Fax"), FIELD_STRING}, /* FAX */ {"mobile", N_("Mobile"), FIELD_STRING}, /* MOBILEPHONE */ {"nick", N_("Nickname/Alias"), FIELD_STRING}, /* NICK */ {"url", N_("URL"), FIELD_STRING}, /* URL */ {"notes", N_("Notes"), FIELD_STRING}, /* NOTES */ {"anniversary", N_("Anniversary day"), FIELD_DATE}, /* ANNIVERSARY */ {0} /* ITEM_FIELDS */ }; extern int first_list_item; extern int curitem; extern char *selected; extern char *datafile; static abook_field * declare_standard_field(int i) { abook_field *f = xmalloc(sizeof(abook_field)); f = memcpy(f, &standard_fields[i], sizeof(abook_field)); f->name = xstrdup(gettext(f->name)); add_field(&fields_list, f); assert(standard_fields_indexed[i] == -1); standard_fields_indexed[i] = fields_count++; return f; } abook_field * find_standard_field(char *key, int do_declare) { int i; for(i = 0; standard_fields[i].key; i++) if(0 == strcmp(standard_fields[i].key, key)) goto found; return NULL; found: return do_declare ? declare_standard_field(i) : &standard_fields[i]; } /* Search for a field. Use the list of declared fields if no list specified. */ abook_field * real_find_field(char *key, abook_field_list *list, int *number) { abook_field_list *cur; int i; for(cur = (list ? list : fields_list), i = 0; cur; cur = cur->next, i++) if(0 == strcmp(cur->field->key, key)) { if(number) *number = i; return cur->field; } if(number) *number = -1; return NULL; } void get_field_info(int i, char **key, char **name, int *type) { abook_field_list *cur = fields_list; int j; assert(i < fields_count); for(j = 0; i >= 0 && j < i; j++, cur = cur->next) ; if(key) *key = (i < 0) ? NULL : cur->field->key; if(name) *name = (i < 0) ? NULL : cur->field->name; if(type) *type = (i < 0) ? -1 : cur->field->type; } void add_field(abook_field_list **list, abook_field *f) { abook_field_list *tmp; for(tmp = *list; tmp && tmp->next; tmp = tmp->next) ; if(tmp) { tmp->next = xmalloc(sizeof(abook_field_list)); tmp = tmp->next; } else *list = tmp = xmalloc(sizeof(abook_field_list)); tmp->field = f; tmp->next = NULL; } char * declare_new_field(char *key, char *name, char *type, int accept_standard) { abook_field *f; if(find_declared_field(key)) return _("field already defined"); if(find_standard_field(key, accept_standard)) return accept_standard ? NULL /* ok, added */ : _("standard field does not need to be declared"); f = xmalloc(sizeof(abook_field)); f->key = xstrdup(key); f->name = xstrdup(name); if(!*type || (0 == strcasecmp("string", type))) f->type = FIELD_STRING; else if(0 == strcasecmp("emails", type)) f->type = FIELD_EMAILS; else if(0 == strcasecmp("list", type)) f->type = FIELD_LIST; else if(0 == strcasecmp("date", type)) f->type = FIELD_DATE; else return _("unknown type"); add_field(&fields_list, f); fields_count++; return NULL; } /* * Declare a new field while database is already loaded * making it grow accordingly */ static void declare_unknown_field(char *key) { int i; declare_new_field(key, key, "string", 1 /* accept to declare "standard" fields */); if(!database) return; for(i = 0; i < items; i++) if(database[i]) { database[i] = xrealloc(database[i], ITEM_SIZE); database[i][fields_count - 1] = NULL; } } /* * Declare "standard" fields, thus preserving them while parsing a database, * even if they won't be displayed. */ void init_standard_fields() { int i; for(i = 0; standard_fields[i].key; i++) if(standard_fields_indexed[i] == -1) declare_standard_field(i); } /* Some initializations - Must be called _before_ load_opts() */ void prepare_database_internals() { int i; for(i = 0; i < ITEM_FIELDS; i++) standard_fields_indexed[i] = -1; /* the only two mandatory fields */ declare_standard_field(NAME); declare_standard_field(EMAIL); } int parse_database(FILE *in) { char *line = NULL; char *tmp; int sec=0, field; list_item item; item = item_create(); for(;;) { line = getaline(in); if(feof(in)) { if(item[field_id(NAME)] && sec) { add_item2database(item); } else { item_empty(item); } break; } if(!*line || *line == '\n' || *line == '#') { goto next; } else if(*line == '[') { if(item[field_id(NAME)] && sec ) { add_item2database(item); } else { item_empty(item); } sec = 1; memset(item, 0, ITEM_SIZE); if(!(tmp = strchr(line, ']'))) sec = 0; /*incorrect section lines are skipped*/ } else if((tmp = strchr(line, '=') ) && sec) { *tmp++ = '\0'; find_field_number(line, &field); if(field != -1) { item[field] = xstrdup(tmp); goto next; } else if(!strcasecmp(opt_get_str(STR_PRESERVE_FIELDS), "all")){ declare_unknown_field(line); item = xrealloc(item, ITEM_SIZE); item[fields_count - 1] = xstrdup(tmp); goto next; } } next: xfree(line); } xfree(line); item_free(&item); return 0; } int load_database(char *filename) { FILE *in; if(database != NULL) close_database(); if ((in = abook_fopen(filename, "r")) == NULL) return -1; parse_database(in); return (items == 0) ? 2 : 0; } int write_database(FILE *out, struct db_enumerator e) { int j; int i = 0; abook_field_list *cur; fprintf(out, "# abook addressbook file\n\n" "[format]\n" "program=" PACKAGE "\n" "version=" VERSION "\n" "\n\n" ); db_enumerate_items(e) { fprintf(out, "[%d]\n", i); for(cur = fields_list, j = 0; cur; cur = cur->next, j++) { if( database[e.item][j] != NULL && *database[e.item][j] ) fprintf(out, "%s=%s\n", cur->field->key, database[e.item][j] ); } fputc('\n', out); i++; } return 0; } int save_database() { FILE *out; int ret = 0; struct db_enumerator e = init_db_enumerator(ENUM_ALL); char *datafile_new = strconcat(datafile, ".new", NULL); char *datafile_old = strconcat(datafile, "~", NULL); if( (out = abook_fopen(datafile_new, "w")) == NULL ) { ret = -1; goto out; } if(!list_is_empty()) /* * Possibly should check if write_database failed. * Currently it returns always zero. */ write_database(out, e); fclose(out); if(access(datafile, F_OK) == 0 && (rename(datafile, datafile_old)) == -1) ret = -1; if((rename(datafile_new, datafile)) == -1) ret = -1; out: free(datafile_new); free(datafile_old); return ret; } static void db_free_item(int item) { item_empty(database[item]); } void close_database() { int i; for(i=0; i <= LAST_ITEM; i++) db_free_item(i); xfree(database); free(selected); database = NULL; selected = NULL; items = 0; first_list_item = curitem = -1; list_capacity = 0; } static void validate_item(list_item item) { abook_field_list *f; int i, max_field_len; char *tmp; for(f = fields_list, i = 0; f; f = f->next, i++) { max_field_len = 0; switch(f->field->type) { case FIELD_EMAILS: max_field_len = MAX_EMAILSTR_LEN; if(item[i] == NULL) item[i] = xstrdup(""); break; case FIELD_LIST: /* TODO quote string if it contains commas */ break; case FIELD_STRING: max_field_len = MAX_FIELD_LEN; break; case FIELD_DATE: break; default: assert(0); } if(max_field_len && item[i] && ((int)strlen(item[i]) > max_field_len)) { /* truncate field */ tmp = item[i]; item[i][max_field_len - 1] = 0; item[i] = xstrdup(item[i]); free(tmp); } } } static void adjust_list_capacity() { if(list_capacity < 1) list_capacity = INITIAL_LIST_CAPACITY; else if(items >= list_capacity) list_capacity *= 2; else if(list_capacity / 2 > items) list_capacity /= 2; else return; if(database) database = xrealloc(database,sizeof(list_item) * list_capacity); else /* allocate memory _and_ initialize pointers to NULL */ database = xmalloc0(sizeof(list_item) * list_capacity); selected = xrealloc(selected, list_capacity); } int add_item2database(list_item item) { /* 'name' field is mandatory */ if((item[field_id(NAME)] == NULL) || ! *item[field_id(NAME)]) { item_empty(item); return 1; } if(++items > list_capacity) adjust_list_capacity(); validate_item(item); selected[LAST_ITEM] = 0; database[LAST_ITEM] = item_create(); item_copy(database[LAST_ITEM], item); return 0; } void remove_selected_items() { int i, j; if(list_is_empty()) return; if(!selected_items()) selected[curitem] = 1; for(j = LAST_ITEM; j >= 0; j--) { if(selected[j]) { db_free_item(j); /* added for .4 data_s_ */ for(i = j; i < LAST_ITEM; i++) { item_copy(database[i], database[i + 1]); selected[i] = selected[i + 1]; } item_free(&database[LAST_ITEM]); items--; } } if(curitem > LAST_ITEM && items > 0) curitem = LAST_ITEM; adjust_list_capacity(); select_none(); } char * get_surname(char *s) { char *p = s + strlen(s); assert(s != NULL); while(p > s && *(p - 1) != ' ') p--; return xstrdup(p); } static int surnamecmp(const void *i1, const void *i2) { int ret, idx = field_id(NAME); char *n1, *n2, *s1, *s2; n1 = (*(list_item *)i1)[idx]; n2 = (*(list_item *)i2)[idx]; s1 = get_surname(n1); s2 = get_surname(n2); if( !(ret = safe_strcoll(s1, s2)) ) ret = safe_strcoll(n1, n2); free(s1); free(s2); return ret; } static int sort_field = -1; static int namecmp(const void *i1, const void *i2) { char *n1, *n2; assert(sort_field >= 0 && sort_field < fields_count); n1 = (*(list_item *)i1)[sort_field]; n2 = (*(list_item *)i2)[sort_field]; return safe_strcoll(n1, n2); } void sort_by_field(char *name) { int field; select_none(); name = (name == NULL) ? opt_get_str(STR_SORT_FIELD) : name; find_field_number(name, &field); if(field < 0) { if(name == opt_get_str(STR_SORT_FIELD)) statusline_msg(_("Invalid field value defined " "in configuration")); else statusline_msg(_("Invalid field value for sorting")); return; } sort_field = field; qsort((void *)database, items, sizeof(list_item), namecmp); refresh_screen(); } void sort_surname() { select_none(); qsort((void *)database, items, sizeof(list_item), surnamecmp); refresh_screen(); } /* TODO implement a search based on more sophisticated patterns */ int find_item(char *str, int start, int search_fields[]) { int i, id; char *findstr = NULL; char *tmp = NULL; int ret = -1; /* not found */ struct db_enumerator e = init_db_enumerator(ENUM_ALL); if(list_is_empty() || !is_valid_item(start)) return -2; /* error */ findstr = xstrdup(str); findstr = strlower(findstr); e.item = start - 1; /* must be "real start" - 1 */ db_enumerate_items(e) { for(i = 0; search_fields[i] >= 0; i++) { if((id = field_id(search_fields[i])) == -1) continue; if(database[e.item][id] == NULL) continue; tmp = xstrdup(database[e.item][id]); if( tmp && strstr(strlower(tmp), findstr) ) { ret = e.item; goto out; } xfree(tmp); } } out: free(findstr); free(tmp); return ret; } int is_selected(int item) { return selected[item]; } int is_valid_item(int item) { return item <= LAST_ITEM && item >= 0; } int last_item() { return LAST_ITEM; } int db_n_items() { return items; } int real_db_enumerate_items(struct db_enumerator e) { int item = max(0, e.item + 1); int i; switch(e.mode) { #ifdef DEBUG case ENUM_ALL: break; #endif case ENUM_SELECTED: for(i = item; i <= LAST_ITEM; i++) { if(is_selected(i)) { item = i; goto out; } } return -1; #ifdef DEBUG default: fprintf(stderr, "real_db_enumerate_items() " "BUG: unknown db_enumerator mode: %d\n", e.mode); break; #endif } out: return (item > LAST_ITEM || item < 0) ? -1 : item; } struct db_enumerator init_db_enumerator(int mode) { struct db_enumerator e; e.item = -1; /* important - means "start from beginning" */ e.mode = mode; return e; } list_item item_create() { return xmalloc0(ITEM_SIZE); } void item_free(list_item *item) { assert(item); xfree(*item); } void item_empty(list_item item) { int i; assert(item); for(i = 0; i < fields_count; i++) if(item[i]) xfree(item[i]); } void item_copy(list_item dest, list_item src) { memmove(dest, src, ITEM_SIZE); } void item_duplicate(list_item dest, list_item src) { int i; for(i = 0; i < fields_count; i++) dest[i] = src[i] ? xstrdup(src[i]) : NULL; } /* * Things like item[field_id(NICK)] should never be used, since besides NAME * and EMAIL, none of the standard fields can be assumed to be existing. * * Prefer the functions item_fput(), item_fget(), db_fput() and db_fget() * to access fields in items and database. */ /* quick lookup by "standard" field number */ inline int field_id(int i) { assert((i >= 0) && (i < ITEM_FIELDS)); return standard_fields_indexed[i]; } int item_fput(list_item item, int i, char *val) { int id = field_id(i); if(id != -1) { item[id] = val; return 1; } return 0; } char * item_fget(list_item item, int i) { int id = field_id(i); if(id != -1) return item[id]; else return NULL; } int real_db_field_put(int item, int i, int std, char *val) { int id; assert(database[item]); id = std ? field_id(i) : i; if(id != -1) { database[item][id] = val; return 1; } return 0; } char * real_db_field_get(int item, int i, int std) { int id; assert(database[item]); id = std ? field_id(i) : i; if(id != -1) return database[item][id]; else return NULL; } list_item db_item_get(int i) { return database[i]; } /* Fetch addresses from all fields of FIELD_EMAILS type */ /* Memory has to be freed by the caller */ char * db_email_get(int item) { int i; char *res; abook_field_list *cur; abook_list *emails = NULL; for(cur = fields_list, i = 0; cur; cur = cur->next, i++) if(cur->field->type == FIELD_EMAILS && *database[item][i]) abook_list_append(&emails, database[item][i]); res = abook_list_to_csv(emails); abook_list_free(&emails); return res ? res : xstrdup(""); } abook-0.6.0pre2/edit.c000644 000764 000764 00000032074 10477455762 015273 0ustar00jaakkojaakko000000 000000 /* * $Id: edit.c,v 1.55 2006/09/06 02:46:44 cduval Exp $ * * by JH * * Copyright (C) Jaakko Heinonen */ #include #include #include #include #include "abook_curses.h" #include "ui.h" #include "abook.h" #include "database.h" #include "gettext.h" #include "list.h" #include "edit.h" #include "misc.h" #include "views.h" #include "xmalloc.h" #ifdef HAVE_CONFIG_H # include "config.h" #endif /* * some extern variables */ extern int views_count; WINDOW *editw; static void editor_tab(const int tab) { int i, j; int x_pos = 2; /* current x pos */ char *tab_name; mvwhline(editw, TABLINE + 1, 0, UI_HLINE_CHAR, EDITW_COLS); for(i = 0; i < views_count; i++) { view_info(i, &tab_name, NULL); int width = strwidth(tab_name) + 5; if(x_pos + width + 1 > EDITW_COLS) { statusline_addstr(_("Tab name too wide for screen")); break; } mvwaddch(editw, TABLINE + 1, x_pos, UI_TEE_CHAR); mvwaddch(editw, TABLINE + 1, x_pos + width - 2, UI_TEE_CHAR); mvwaddch(editw, TABLINE, x_pos, UI_ULCORNER_CHAR); mvwaddch(editw, TABLINE, x_pos + 1, UI_LBOXLINE_CHAR); mvwaddstr(editw, TABLINE, x_pos + 2, tab_name); mvwaddch(editw, TABLINE, x_pos + width - 3, UI_RBOXLINE_CHAR); mvwaddch(editw, TABLINE, x_pos + width - 2, UI_URCORNER_CHAR); if(i == tab) { mvwaddch(editw, TABLINE + 1, x_pos, UI_LRCORNER_CHAR); for(j = 0; j < width - 3; j++) mvwaddstr(editw, TABLINE + 1, x_pos + j + 1, " "); mvwaddch(editw, TABLINE + 1, x_pos + width - 2, UI_LLCORNER_CHAR); } x_pos += width; } } void get_first_email(char *str, int item) { char *tmp, *emails = db_email_get(item); if(!*emails) { *str = 0; return; } strncpy(str, emails, MAX_EMAIL_LEN); free(emails); if( (tmp = strchr(str, ',')) ) *tmp = 0; else str[MAX_EMAIL_LEN - 1] = 0; } /* This only rolls emails from the 'email' field, not emails from any * field of type FIELD_EMAILS. * TODO: expand to ask for which field to roll if several are present? */ static void roll_emails(int item, enum rotate_dir dir) { abook_list *emails = csv_to_abook_list(db_fget(item, EMAIL)); if(!emails) return; free(db_fget(item, EMAIL)); abook_list_rotate(&emails, dir); db_fput(item, EMAIL, abook_list_to_csv(emails)); abook_list_free(&emails); } static void init_editor() { clear(); editw = newwin(EDITW_LINES, EDITW_COLS, EDITW_TOP, EDITW_X); notimeout(editw, TRUE); /* handling of escape key */ refresh_statusline(); } enum { BACKUP_ITEM, RESTORE_ITEM, CLEAR_UNDO }; static int edit_undo(int item, int mode) { static list_item backup = NULL; static int backed_up_item = -1; switch(mode) { case CLEAR_UNDO: if(backup) { item_empty(backup); item_free(&backup); } break; case BACKUP_ITEM: if(backup) { item_empty(backup); item_free(&backup); } backup = item_create(); item_duplicate(backup, db_item_get(item)); backed_up_item = item; break; case RESTORE_ITEM: if(backup) { item_empty(db_item_get(backed_up_item)); item_copy(db_item_get(backed_up_item), backup); item_free(&backup); return backed_up_item; } break; default: assert(0); } return item; } static void close_editor() { edit_undo(-1, CLEAR_UNDO); delwin(editw); refresh_screen(); } static void print_editor_header(int item) { char *header; char email[MAX_EMAIL_LEN]; if((header = xmalloc(EDITW_COLS)) == NULL) return; get_first_email(email, item); if(*email) snprintf(header, EDITW_COLS, "%s <%s>", db_name_get(item), email); else snprintf(header, EDITW_COLS, "%s", db_name_get(item)); mvwaddstr(editw, 0, (EDITW_COLS - strwidth(header)) / 2, header); free(header); } static void editor_print_data(int tab, int item) { int j = 1, nb; int y, x; abook_field_list *cur; char *str; view_info(tab, NULL, &cur); for(; cur; cur = cur->next) { if(j > 1) { getyx(editw, y, x); y++; } else y = FIELDS_START_Y; mvwprintw(editw, y, FIELDS_START_X, "%c - ", (j < 10) ? '0' + j : 'A' + j - 10); mvwaddnstr(editw, y, FIELDS_START_X + 4, cur->field->name, bytes2width(cur->field->name, FIELDNAME_MAX_WIDTH)); mvwaddch(editw, y, TAB_COLON_POS, ':'); if((cur->field->type == FIELD_EMAILS) || (cur->field->type == FIELD_LIST)) { abook_list *emails, *e; find_field_number(cur->field->key, &nb); emails = csv_to_abook_list(db_fget_byid(item, nb)); for(e = emails; e; e = e->next) { getyx(editw, y, x); mvwaddnstr(editw, y + 1, TAB_COLON_POS + 2, e->data, bytes2width(e->data, FIELD_MAX_WIDTH)); mvwaddch(editw, y + 1, TAB_COLON_POS, UI_VLINE_CHAR); } if(emails) { mvwaddch(editw, y + 2, TAB_COLON_POS, UI_LLCORNER_CHAR); mvwhline(editw, y + 2, TAB_COLON_POS + 1, UI_HLINE_CHAR, EDITW_COLS - TAB_COLON_POS - 2); } abook_list_free(&emails); } else if(cur->field->type == FIELD_DATE) { int day, month, year; char buf[12]; find_field_number(cur->field->key, &nb); if((str = db_fget_byid(item, nb)) != NULL) strncpy(buf, str, sizeof(buf)); if(str && parse_date_string(buf, &day, &month, &year)) { if(year) str = strdup_printf("%04d-%02d-%02d", year, month, day); else str = strdup_printf("--%02d-%02d", month, day); mvwaddnstr(editw, y, TAB_COLON_POS + 2, str, bytes2width(str, FIELD_MAX_WIDTH)); free(str); } } else { find_field_number(cur->field->key, &nb); str = safe_str(db_fget_byid(item, nb)); mvwaddnstr(editw, y, TAB_COLON_POS + 2, str, bytes2width(str, FIELD_MAX_WIDTH)); } j++; } } /* * function: change_field * * parameters: * (char *msg) * message to display as a prompt * (char **field) * a pointer to a pointer which will point a new string. if the latter * pointer != NULL it will be freed (if user doesn't cancel) * (size_t max_len) * maximum length of field to read from user * * returns (int) * a nonzero value if user has cancelled and zero if user has typed a * valid string */ static int change_field(char *msg, char **field, size_t max_len) { char *old; int ret = 0; old = *field; *field = ui_readline(msg, old, max_len - 1, 0); if(*field) { xfree(old); if(!**field) xfree(*field); } else { *field = old; ret = 1; } clear_statusline(); refresh_statusline(); return ret; } static int change_name_field(char *msg, char **field, size_t max_len) { char *tmp; int ret; tmp = xstrdup(*field); ret = change_field(msg, field, max_len); if(*field == NULL || ! **field) { xfree(*field); *field = xstrdup(tmp); } xfree(tmp); return ret; } static void fix_email_str(char *str) { for(; *str; str++) *str = *str == ',' ? '_' : *str; } static void edit_list(int item, int nb, int isemail) { char *field, *msg, *keys; abook_list *list, *e; int choice = 1, elem_count; list = csv_to_abook_list(db_fget_byid(item, nb)); for(e = list, elem_count = 0; e; e = e->next, elem_count++) ; if(elem_count) { keys = xstrndup(S_("keybindings_new_123456789|n123456789"), elem_count + 1); msg = strdup_printf(_("Choose %s to modify (<1>%s%c%s%s."), isemail ? _("email") : _("item"), (elem_count > 1) ? "-<" : "", (elem_count > 1) ? '0' + elem_count : ')', (elem_count > 1) ? ">)" : "", (elem_count < MAX_LIST_ITEMS) ? _(" or ew") : "" ); choice = statusline_askchoice( msg, keys, (elem_count < MAX_LIST_ITEMS) ? 1 : 2 ); free(keys); free(msg); } if(choice == 0) return; field = (choice > 1) ? xstrdup(abook_list_get(list, choice - 2)->data) : NULL; if(change_field(isemail ? _("E-mail: ") : _("Item: "), &field, MAX_EMAIL_LEN)) return; /* user cancelled ( C-g ) */ /* TODO if list item contains commas, should use quotes instead */ if(field) fix_email_str(field); if(choice == 1) abook_list_append(&list, field); else abook_list_replace(&list, choice - 2, field); if(field) xfree(field); field = abook_list_to_csv(list); db_fput_byid(item, nb, field ? field : xstrdup("")); abook_list_free(&list); } static int is_valid_date(const int day, const int month, const int year) { int valid = 1; int month_length[13] = { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; /* * leap year */ if ((!(year % 4)) && ((year % 100) || !(year % 400))) month_length[2] = 29; if (month < 1 || month > 12) valid = 0; else if (day < 1 || day > month_length[month]) valid = 0; else if (year < 0) /* we don't accept negative year numbers */ valid = 0; return valid; } int parse_date_string(char *s, int *day, int *month, int *year) { int i = 0; char *p = s; assert(s && day && month && year); if(*s == '-' && *s++ == '-') { /* omitted year */ *year = 0; p = ++s; i++; } while(*s) { if(isdigit(*s)) { s++; continue; } else if(*s == '-') { if(++i > 3) return FALSE; *s++ = '\0'; switch(i) { case 1: *year = safe_atoi(p); break; case 2: *month = safe_atoi(p); break; } p = s; } else return FALSE; } if (i != 2 || !*p) return FALSE; *day = atoi(p); return is_valid_date(*day, *month, *year); } static void edit_date(int item, int nb) { int i, date[3], old = FALSE; char buf[12], *s = db_fget_byid(item, nb); char *field[] = { N_("Day: "), N_("Month: "), N_("Year (optional): ") }; if(s) { strncpy(buf, s, sizeof(buf)); old = parse_date_string(buf, &date[0], &date[1], &date[2]); } for(i = 0; i < 3; i++) { s = (old && date[i]) ? strdup_printf("%d", date[i]) : NULL; if(change_field(gettext(field[i]), &s, 5)) return; /* user aborted with ^G */ date[i] = (s && is_number(s)) ? atoi(s) : 0; if(!s) { switch(i) { case 0: db_fput_byid(item, nb, NULL); /*delete*/ case 1: /* fall through */ return; } } else xfree(s); } /* ISO 8601 date, of the YYYY-MM-DD or --MM-DD format */ if(is_valid_date(date[0], date[1], date[2])) { if(date[2]) s = strdup_printf("%04d-%02d-%02d", date[2], date[1], date[0]); else s = strdup_printf("--%02d-%02d", date[1], date[0]); db_fput_byid(item, nb, xstrdup(s)); } else statusline_msg(_("Invalid date")); } /* input range: 1-9A-Z * output range: 0-34 */ static int key_to_field_number(char c) { int n = c - '1'; if(n >= 0 && n < 9) return n; n = c - 'A' + 9; if(n > 8 && n < 35) return n; return -1; } static void edit_field(int tab, char c, int item_number) { int i = 0, number, idx; char *msg; abook_field_list *f; list_item item; if((number = key_to_field_number(c)) < 0) return; edit_undo(item_number, BACKUP_ITEM); view_info(tab, NULL, &f); while(1) { if(!f) return; if(i == number) break; f = f->next; i++; } find_field_number(f->field->key, &idx); switch(f->field->type) { case FIELD_STRING: msg = strdup_printf("%s: ", f->field->name); item = db_item_get(item_number); if(strcmp(f->field->key, "name") == 0) change_name_field(msg,&item[idx],MAX_FIELD_LEN); else change_field(msg,&item[idx],MAX_FIELD_LEN); free(msg); break; case FIELD_LIST: edit_list(item_number, idx, 0); break; case FIELD_EMAILS: edit_list(item_number, idx, 1); break; case FIELD_DATE: edit_date(item_number, idx); return; default: assert(0); } } static int edit_loop(int item) { static int tab = 0; /* first tab */ int c; werase(editw); headerline(gettext(EDITOR_HELPLINE)); refresh_statusline(); print_editor_header(item); editor_tab(tab); editor_print_data(tab, item); wmove(editw, EDITW_LINES - 1, EDITW_COLS - 1); refresh(); wrefresh(editw); c = getch(); if(c == '\033') { statusline_addstr("ESC-"); c = getch(); clear_statusline(); /* Escaped bindings */ switch(c) { case 'r': roll_emails(item, ROTATE_RIGHT); break; default: break; } return item; } /* No uppercase nor numeric key should be used in this menu, * as they are reserved for field selection */ switch(c) { case 'h': case KEY_LEFT: tab = tab == 0 ? views_count - 1 : tab - 1; break; case 'l': case KEY_RIGHT: tab = tab == views_count - 1 ? 0 : tab + 1; break; case KEY_UP: case '<': case 'k': if(is_valid_item(item - 1)) item--; break; case KEY_DOWN: case '>': case 'j': if(is_valid_item(item + 1)) item++; break; case 'r': roll_emails(item, ROTATE_LEFT); break; case '?': display_help(HELP_EDITOR); break; case 'u': item = edit_undo(item, RESTORE_ITEM); break; case 'm': launch_mutt(item); clearok(stdscr, 1); break; case 'v': launch_wwwbrowser(item); clearok(stdscr, 1); break; case 12 : clearok(stdscr, 1); break; /* ^L (refresh screen) */ case 'q': return -1; default: edit_field(tab, c, item); } return item; } void edit_item(int item) { if(item < 0) { if(list_get_curitem() < 0) return; else item = list_get_curitem(); } init_editor(); while((item = edit_loop(item)) >= 0) list_set_curitem(item); /* this is not very clean way to go */ close_editor(); } void add_item() { char *field = NULL; list_item item = item_create(); change_field(_("Name: "), &field, MAX_FIELD_LEN); if( field == NULL ) return; item_fput(item, NAME, field); add_item2database(item); item_free(&item); list_set_curitem(last_item()); edit_item(last_item()); } abook-0.6.0pre2/filter.c000644 000764 000764 00000103443 10477455762 015632 0ustar00jaakkojaakko000000 000000 /* * $Id: filter.c,v 1.55 2006/09/06 02:46:44 cduval Exp $ * * by JH * * Copyright (C) Jaakko Heinonen */ #include #include #include #include #include #include #include #include "abook_curses.h" #include "filter.h" #include "abook.h" #include "database.h" #include "edit.h" #include "gettext.h" #include "list.h" #include "misc.h" #include "options.h" #include "ui.h" #include "xmalloc.h" #include extern abook_field_list *fields_list; extern int fields_count; /* * function declarations */ /* * import filter prototypes */ static int ldif_parse_file(FILE *handle); static int mutt_parse_file(FILE *in); static int pine_parse_file(FILE *in); static int csv_parse_file(FILE *in); static int allcsv_parse_file(FILE *in); static int palmcsv_parse_file(FILE *in); /* * export filter prototypes */ static int ldif_export_database(FILE *out, struct db_enumerator e); static int html_export_database(FILE *out, struct db_enumerator e); static int pine_export_database(FILE *out, struct db_enumerator e); static int csv_export_database(FILE *out, struct db_enumerator e); static int allcsv_export_database(FILE *out, struct db_enumerator e); static int palm_export_database(FILE *out, struct db_enumerator e); static int gcrd_export_database(FILE *out, struct db_enumerator e); static int mutt_alias_export(FILE *out, struct db_enumerator e); static int elm_alias_export(FILE *out, struct db_enumerator e); static int text_export_database(FILE *out, struct db_enumerator e); static int spruce_export_database(FILE *out, struct db_enumerator e); static int wl_export_database(FILE *out, struct db_enumerator e); static int bsdcal_export_database(FILE *out, struct db_enumerator e); /* * end of function declarations */ struct abook_input_filter i_filters[] = { { "abook", N_("abook native format"), parse_database }, { "ldif", N_("ldif / Netscape addressbook"), ldif_parse_file }, { "mutt", N_("mutt alias"), mutt_parse_file }, { "pine", N_("pine addressbook"), pine_parse_file }, { "csv", N_("comma separated values"), csv_parse_file }, { "allcsv", N_("comma separated values (all fields)"), allcsv_parse_file }, { "palmcsv", N_("Palm comma separated values"), palmcsv_parse_file }, { "\0", NULL, NULL } }; struct abook_output_filter e_filters[] = { { "abook", N_("abook native format"), write_database }, { "ldif", N_("ldif / Netscape addressbook (.4ld)"), ldif_export_database }, { "mutt", N_("mutt alias"), mutt_alias_export }, { "html", N_("html document"), html_export_database }, { "pine", N_("pine addressbook"), pine_export_database }, { "gcrd", N_("GnomeCard (VCard) addressbook"), gcrd_export_database }, { "csv", N_("comma separated values"), csv_export_database }, { "allcsv", N_("comma separated values (all fields)"), allcsv_export_database }, { "palmcsv", N_("Palm comma separated values"), palm_export_database}, { "elm", N_("elm alias"), elm_alias_export }, { "text", N_("plain text"), text_export_database }, { "wl", N_("Wanderlust address book"), wl_export_database }, { "spruce", N_("Spruce address book"), spruce_export_database }, { "bsdcal", N_("BSD calendar"), bsdcal_export_database }, { "\0", NULL, NULL } }; /* * common functions */ void print_filters() { int i; puts(_("input:")); for(i=0; *i_filters[i].filtname ; i++) printf("\t%s\t%s\n", i_filters[i].filtname, gettext(i_filters[i].desc)); putchar('\n'); puts(_("output:")); for(i=0; *e_filters[i].filtname ; i++) printf("\t%s\t%s\n", e_filters[i].filtname, gettext(e_filters[i].desc)); putchar('\n'); } static int number_of_output_filters() { int i; for(i=0; *e_filters[i].filtname ; i++) ; return i; } static int number_of_input_filters() { int i; for(i=0; *i_filters[i].filtname ; i++) ; return i; } static char * get_real_name() { char *username = getenv("USER"); struct passwd *pwent; int rtn; char *tmp; pwent = getpwnam(username); if((tmp = xstrdup(pwent->pw_gecos)) == NULL) return xstrdup(username); rtn = sscanf(pwent->pw_gecos, "%[^,]", tmp); if (rtn == EOF || rtn == 0) { free(tmp); return xstrdup(username); } else return tmp; } /* * import */ static int i_read_file(char *filename, int (*func) (FILE *in)); static void import_screen() { int i; clear(); refresh_statusline(); headerline(_("import database")); mvaddstr(3, 1, _("please select a filter")); for(i=0; *i_filters[i].filtname ; i++) mvprintw(5 + i, 6, "%c -\t%s\t%s\n", 'a' + i, i_filters[i].filtname, gettext(i_filters[i].desc)); mvprintw(6 + i, 6, _("x -\tcancel")); } int import_database() { int filter; char *filename; int tmp = db_n_items(); import_screen(); filter = getch() - 'a'; if(filter == 'x' - 'a' || filter >= number_of_input_filters() || filter < 0) { refresh_screen(); return 1; } mvaddstr(5+filter, 2, "->"); filename = ask_filename(_("Filename: ")); if(!filename) { refresh_screen(); return 2; } if(i_read_file(filename, i_filters[filter].func )) statusline_msg(_("Error occured while opening the file")); else if(tmp == db_n_items()) statusline_msg(_("File does not seem to be a valid addressbook")); refresh_screen(); free(filename); return 0; } static int i_read_file(char *filename, int (*func) (FILE *in)) { FILE *in; int ret = 0; if( (in = abook_fopen( filename, "r" )) == NULL ) return 1; ret = (*func) (in); fclose(in); return ret; } int import_file(char filtname[FILTNAME_LEN], char *filename) { int i; int tmp = db_n_items(); int ret = 0; for(i=0;; i++) { if(! strncasecmp(i_filters[i].filtname, filtname, FILTNAME_LEN) ) break; if(! *i_filters[i].filtname) { i = -1; break; } } if(i < 0) return -1; if(!strcmp(filename, "-")) { struct stat s; if((fstat(fileno(stdin), &s)) == -1 || S_ISDIR(s.st_mode)) ret = 1; else ret = (*i_filters[i].func) (stdin); } else ret = i_read_file(filename, i_filters[i].func); if(tmp == db_n_items()) ret = 1; return ret; } /* * export */ static int e_write_file(char *filename, int (*func) (FILE *in, struct db_enumerator e), int mode); static void export_screen() { int i; clear(); refresh_statusline(); headerline(_("export database")); mvaddstr(3, 1, _("please select a filter")); for(i = 0; *e_filters[i].filtname ; i++) mvprintw(5 + i, 6, "%c -\t%s\t%s\n", 'a' + i, e_filters[i].filtname, gettext(e_filters[i].desc)); mvprintw(6 + i, 6, _("x -\tcancel")); } int export_database() { int filter; int enum_mode = ENUM_ALL; char *filename; export_screen(); filter = getch() - 'a'; if(filter == 'x' - 'a' || filter >= number_of_output_filters() || filter < 0) { refresh_screen(); return 1; } mvaddstr(5 + filter, 2, "->"); if(selected_items()) { switch(statusline_askchoice( _("Export ll, export elected, or ancel?"), S_("keybindings:all/selected/cancel|asc"), 3)) { case 1: break; case 2: enum_mode = ENUM_SELECTED; break; case 0: case 3: refresh_screen(); return 1; } clear_statusline(); } filename = ask_filename(_("Filename: ")); if(!filename) { refresh_screen(); return 2; } if( e_write_file(filename, e_filters[filter].func, enum_mode)) statusline_msg(_("Error occured while exporting")); refresh_screen(); free(filename); return 0; } static int e_write_file(char *filename, int (*func) (FILE *in, struct db_enumerator e), int mode) { FILE *out; int ret = 0; struct db_enumerator enumerator = init_db_enumerator(mode); if((out = fopen(filename, "a")) == NULL) return 1; if(ftell(out)) return 1; ret = (*func) (out, enumerator); fclose(out); return ret; } int fexport(char filtname[FILTNAME_LEN], FILE *handle, int enum_mode) { int i; struct db_enumerator e = init_db_enumerator(enum_mode); for(i=0;; i++) { if(!strncasecmp(e_filters[i].filtname, filtname, FILTNAME_LEN)) break; if(!*e_filters[i].filtname) { i = -1; break; } } return (e_filters[i].func) (handle, e); } int export_file(char filtname[FILTNAME_LEN], char *filename) { const int mode = ENUM_ALL; int i; int ret = 0; struct db_enumerator e = init_db_enumerator(mode); for(i=0;; i++) { if(!strncasecmp(e_filters[i].filtname, filtname, FILTNAME_LEN)) break; if(!*e_filters[i].filtname) { i = -1; break; } } if(i < 0) return -1; if(!strcmp(filename, "-")) ret = (e_filters[i].func) (stdout, e); else ret = e_write_file(filename, e_filters[i].func, mode); return ret; } /* * end of common functions */ /* * ldif import */ #include "ldif.h" static void ldif_fix_string(char *str); #define LDIF_ITEM_FIELDS 16 typedef char *ldif_item[LDIF_ITEM_FIELDS]; static ldif_item ldif_field_names = { "cn", "mail", "streetaddress", "streetaddress2", "locality", "st", "postalcode", "countryname", "homephone", "description", "homeurl", "facsimiletelephonenumber", "cellphone", "xmozillaanyphone", "xmozillanickname", "objectclass", /* this must be the last entry */ }; static int ldif_conv_table[LDIF_ITEM_FIELDS] = { NAME, /* "cn" */ EMAIL, /* "mail" */ ADDRESS, /* "streetaddress" */ ADDRESS2, /* "streetaddress2" */ CITY, /* "locality" */ STATE, /* "st" */ ZIP, /* "postalcode" */ COUNTRY, /* "countryname" */ PHONE, /* "homephone" */ NOTES, /* "description" */ URL, /* "homeurl" */ FAX, /* "facsimiletelephonenumber" */ MOBILEPHONE, /* "cellphone" */ WORKPHONE, /* "xmozillaanyphone" */ NICK, /* "xmozillanickname" */ -1, /* "objectclass" */ /* this must be the last entry */ }; static char * ldif_read_line(FILE *in) { char *buf = NULL; char *ptr, *tmp; long pos; int i; for(i = 1;;i++) { char *line; pos = ftell(in); line = getaline(in); if(feof(in) || !line) break; if(i == 1) { buf = line; continue; } if(*line != ' ') { fseek(in, pos, SEEK_SET); /* fixme ! */ free(line); break; } ptr = line; while( *ptr == ' ') ptr++; tmp = buf; buf = strconcat(buf, ptr, NULL); free(tmp); free(line); } if(buf && *buf == '#' ) { free(buf); return NULL; } return buf; } static void ldif_add_item(ldif_item li) { list_item item; int i; item = item_create(); if(!li[LDIF_ITEM_FIELDS -1]) goto bail_out; for(i=0; i < LDIF_ITEM_FIELDS; i++) { if(ldif_conv_table[i] >= 0 && li[i] && *li[i]) item_fput(item,ldif_conv_table[i],xstrdup(li[i])); } add_item2database(item); bail_out: for(i=0; i < LDIF_ITEM_FIELDS; i++) xfree(li[i]); item_free(&item); } static void ldif_convert(ldif_item item, char *type, char *value) { int i; if(!strcmp(type, "dn")) { ldif_add_item(item); return; } for(i=0; i < LDIF_ITEM_FIELDS; i++) { if(!safe_strcmp(ldif_field_names[i], type) && *value) { if(i == LDIF_ITEM_FIELDS - 1) /* this is a dirty hack */ if(safe_strcmp("person", value)) break; if(item_fget(item, i)) free(item_fget(item, i)); item_fput(item, i, xstrdup(value)); } } } static int ldif_parse_file(FILE *handle) { char *line = NULL; char *type, *value; int vlen; ldif_item item; memset(item, 0, sizeof(item)); do { if( !(line = ldif_read_line(handle)) ) continue; if(-1 == (str_parse_line(line, &type, &value, &vlen))) { xfree(line); continue; /* just skip the errors */ } ldif_fix_string(value); ldif_convert(item, type, value); xfree(line); } while ( !feof(handle) ); ldif_convert(item, "dn", ""); return 0; } static void ldif_fix_string(char *str) { int i, j; for(i = 0, j = 0; j < (int)strlen(str); i++, j++) str[i] = ( str[j] == (char)0xc3 ? (char) str[++j] + (char) 0x40 : str[j] ); str[i] = 0; } /* * end of ldif import */ /* * mutt alias import filter */ #include "getname.h" static int mutt_read_line(FILE *in, char **alias, char **rest) { char *line, *ptr, *tmp; size_t alias_len; if( !(line = ptr = getaline(in)) ) return 1; /* error / EOF */ SKIPWS(ptr); if(strncmp("alias", ptr, 5)) { free(line); return 1; } ptr += 5; SKIPWS(ptr); tmp = ptr; while( ! ISSPACE(*ptr) ) ptr++; alias_len = (size_t)(ptr - tmp); if(alias) *alias = xmalloc_inc(alias_len, 1); strncpy(*alias, tmp, alias_len); *(*alias + alias_len) = 0; SKIPWS(ptr); *rest = xstrdup(ptr); free(line); return 0; } static void mutt_fix_quoting(char *p) { char *escape = 0; for(; *p; p++) { switch(*p) { case '\"': if(escape) *escape = ' '; break; case '\\': escape = p; break; default: escape = 0; } } } static void mutt_parse_email(list_item item) { char *line = item_fget(item, NAME); char *tmp; char *name, *email; #if 0 char *start = line; int i = 0; #endif mutt_fix_quoting(line); tmp = strconcat("From: ", line, NULL); getname(tmp, &name, &email); free(tmp); if(name) item_fput(item, NAME, name); else return; if(email) item_fput(item, EMAIL, email); else return; /* * this is completely broken */ #if 0 while( (start = strchr(start, ',')) && i++ < MAX_EMAILS - 1) { tmp = strconcat("From: ", ++start, NULL); getname(tmp, &name, &email); free(tmp); free(name); if(email) { if(*email) { tmp = strconcat(item[EMAIL], ",", email, NULL); free(item[EMAIL]); item[EMAIL] = tmp; } else { xfree(email); } } } #endif } static int mutt_parse_file(FILE *in) { list_item item = item_create(); for(;;) { memset(item, 0, fields_count * sizeof(char *)); if(!mutt_read_line(in, (field_id(NICK) != -1) ? &item[field_id(NICK)] : NULL, &item[field_id(NAME)])) mutt_parse_email(item); if(feof(in)) { item_empty(item); break; } add_item2database(item); } item_free(&item); return 0; } /* * end of mutt alias import filter */ /* * ldif export filter */ static void ldif_fput_type_and_value(FILE *out,char *type, char *value ) { char *tmp; tmp = ldif_type_and_value(type, value, strlen(value)); fputs(tmp, out); free(tmp); } static int ldif_export_database(FILE *out, struct db_enumerator e) { char email[MAX_EMAILSTR_LEN]; fprintf(out, "version: 1\n"); db_enumerate_items(e) { char *tmp; int j; get_first_email(email, e.item); tmp = strdup_printf("cn=%s,mail=%s",db_name_get(e.item),email); ldif_fput_type_and_value(out, "dn", tmp); free(tmp); for(j = 0; j < LDIF_ITEM_FIELDS; j++) { if(ldif_conv_table[j] >= 0) { if(ldif_conv_table[j] == EMAIL) ldif_fput_type_and_value(out, ldif_field_names[j], email); else if(db_fget(e.item,ldif_conv_table[j])) ldif_fput_type_and_value(out, ldif_field_names[j], db_fget(e.item, ldif_conv_table[j])); } } fprintf(out, "objectclass: top\n" "objectclass: person\n\n"); } return 0; } /* * end of ldif export filter */ /* * html export filter */ static void html_export_write_head(FILE *out); static void html_export_write_tail(FILE *out); extern struct index_elem *index_elements; static void html_print_emails(FILE *out, struct list_field *f) { abook_list *l = csv_to_abook_list(f->data); for(; l; l = l->next) { fprintf(out, "%s", l->data, l->data); if(l->next) fprintf(out, ", "); } abook_list_free(&l); } static int html_export_database(FILE *out, struct db_enumerator e) { struct list_field f; struct index_elem *cur; if(list_is_empty()) return 2; init_index(); html_export_write_head(out); db_enumerate_items(e) { fprintf(out, ""); for(cur = index_elements; cur; cur = cur->next) { if(cur->type != INDEX_FIELD) continue; get_list_field(e.item, cur, &f); if(f.type == FIELD_EMAILS) { fprintf(out, ""); html_print_emails(out, &f); fprintf(out, ""); continue; } else { fprintf(out, "%s", safe_str(f.data)); } } fprintf(out, "\n"); } html_export_write_tail(out); return 0; } static void html_export_write_head(FILE *out) { char *realname = get_real_name(), *str; struct index_elem *cur; fprintf(out, "\n"); fprintf(out, "\n\n %s's addressbook", realname ); fprintf(out, "\n\n\n"); fprintf(out, "\n

%s's addressbook

\n", realname ); fprintf(out, "

\n\n"); fprintf(out, "\n"); for(cur = index_elements; cur; cur = cur->next) { if(cur->type != INDEX_FIELD) continue; get_field_info(cur->d.field.id, NULL, &str, NULL); fprintf(out, "", str); } fprintf(out, "\n\n"); free(realname); } static void html_export_write_tail(FILE *out) { fprintf(out, "\n
%s
\n"); fprintf(out, "\n\n\n"); } /* * end of html export filter */ /* * pine addressbook import filter */ #define PINE_BUF_SIZE 2048 static void pine_fixbuf(char *buf) { int i,j; for(i = 0,j = 0; j < (int)strlen(buf); i++, j++) buf[i] = buf[j] == '\n' ? buf[++j] : buf[j]; } static void pine_convert_emails(char *s) { int i; char *tmp; if(s == NULL || *s != '(') return; for(i = 0; s[i]; i++) s[i] = s[i + 1]; if( ( tmp = strchr(s,')')) ) *tmp = '\0'; for(i = 1; ( tmp = strchr(s, ',') ) != NULL ; i++, s = tmp + 1) if(i > MAX_LIST_ITEMS - 1) { *tmp = '\0'; break; } } static void pine_parse_buf(char *buf) { list_item item; char *start = buf; char *end; char tmp[PINE_BUF_SIZE]; int i, len, last; int pine_conv_table[]= {NICK, NAME, EMAIL, -1, NOTES}; item = item_create(); for(i=0, last=0; !last ; i++) { if( !(end = strchr(start, '\t')) ) last=1; len = last ? strlen(start) : (int) (end-start); len = min(len, PINE_BUF_SIZE - 1); if(i < (int)(sizeof(pine_conv_table) / sizeof(*pine_conv_table)) && pine_conv_table[i] >= 0) { strncpy(tmp, start, len); tmp[len] = 0; if(*tmp) item_fput(item, pine_conv_table[i], xstrdup(tmp)); } start = end + 1; } pine_convert_emails(item_fget(item, EMAIL)); add_item2database(item); item_free(&item); } #define LINESIZE 1024 static int pine_parse_file(FILE *in) { char line[LINESIZE]; char *buf = NULL; char *ptr; int i; fgets(line, LINESIZE, in); while(!feof(in)) { for(i = 2;;i++) { buf = xrealloc(buf, i*LINESIZE); if(i == 2) strcpy(buf, line); fgets(line, LINESIZE, in); ptr=(char *)&line; if(*ptr != ' ' || feof(in)) break; else while(*ptr == ' ') ptr++; strcat(buf, ptr); } if(*buf == '#') { xfree(buf); continue; } pine_fixbuf(buf); pine_parse_buf(buf); xfree(buf); } return 0; } /* * end of pine addressbook import filter */ /* * pine addressbook export filter * * filter doesn't wrap the lines as it should but Pine seems to handle * created files without problems - JH */ static int pine_export_database(FILE *out, struct db_enumerator e) { char *emails; db_enumerate_items(e) { emails = db_email_get(e.item); fprintf(out, strchr(emails, ',') /* multiple addresses? */ ? "%s\t%s\t(%s)\t\t%s\n" : "%s\t%s\t%s\t\t%s\n", safe_str(db_fget(e.item, NICK)), safe_str(db_name_get(e.item)), emails, safe_str(db_fget(e.item, NOTES)) ); free(emails); } return 0; } /* * end of pine addressbook export filter */ /* * csv import filter */ /* FIXME * these files should be parsed according to a certain * lay out, or the default if layout is not given, at * the moment only default is done... */ #define CSV_COMMENT_CHAR '#' #define CSV_DUPLICATE_SEPARATOR " " #define CSV_TABLE_SIZE(t) (sizeof (t) / sizeof *(t)) static int csv_conv_table[] = { NAME, EMAIL, PHONE, NOTES, NICK }; static int allcsv_conv_table[] = { NAME, EMAIL, ADDRESS, ADDRESS2, CITY, STATE, ZIP, COUNTRY, PHONE, WORKPHONE, FAX, MOBILEPHONE, NICK, URL, NOTES, ANNIVERSARY }; static int palmcsv_conv_table[] = { NAME, /* Last name */ NAME, /* First name */ NOTES, /* Title */ NICK, /* Company */ WORKPHONE, PHONE, FAX, MOBILEPHONE, EMAIL, ADDRESS, CITY, STATE, ZIP, COUNTRY, ANNIVERSARY, }; static void csv_convert_emails(char *s) { int i; char *tmp; if(s == NULL) return; for(i = 1; ( tmp = strchr(s, ',') ) != NULL ; i++, s = tmp + 1) if(i > MAX_LIST_ITEMS - 1) { *tmp = 0; break; } } static char * csv_remove_quotes(char *s) { char *copy, *trimmed; int len; copy = trimmed = xstrdup(s); strtrim(trimmed); len = strlen(trimmed); if(trimmed[len - 1] == '\"' && *trimmed == '\"') { if(len < 3) { xfree(copy); return NULL; } trimmed[len - 1] = 0; trimmed++; trimmed = xstrdup(trimmed); free(copy); return trimmed; } xfree(copy); return xstrdup(s); } static int csv_field_to_item(int *table_base, size_t table_size, int field) { if(field < table_size) return field_id(table_base[field]); return -1; } static void csv_store_item(list_item item, int i, char *s) { char *newstr = NULL; if(!s || !*s) return; if( !(newstr = csv_remove_quotes(s)) ) return; if(i >= 0) { if (item[i] != NULL) { char *oldstr = item[i]; item[i] = strconcat(newstr, CSV_DUPLICATE_SEPARATOR, oldstr, NULL); xfree(newstr); xfree(oldstr); } else { item[i] = newstr; } } else { xfree(newstr); } } static int csv_is_valid_quote_end(char *p) { if(*p != '\"') return FALSE; for(p++; *p; p++) { if(*p == ',') return TRUE; else if(!ISSPACE(*p)) return FALSE; } return TRUE; } static int csv_is_valid_quote_start(char *p) { for(; *p; p++) { if(*p == '\"') return TRUE; else if(!ISSPACE(*p)) return FALSE; } return FALSE; } static void csv_parse_line(char *line, int *table_base, size_t table_size) { char *p, *start; int field; bool in_quote = FALSE; list_item item; item = item_create(); for(p = start = line, field = 0; *p; p++) { if(in_quote) { if(csv_is_valid_quote_end(p)) in_quote = FALSE; } else { if ( (((p - start) / sizeof (char)) < 2 ) && csv_is_valid_quote_start(p) ) in_quote = TRUE; } if(*p == ',' && !in_quote) { *p = 0; csv_store_item(item, csv_field_to_item(table_base,table_size,field), start); field++; start = p + 1; } } /* * store last field */ csv_store_item(item, csv_field_to_item(table_base, table_size, field), start); csv_convert_emails(item_fget(item, EMAIL)); add_item2database(item); item_free(&item); } static int csv_parse_file_common(FILE *in, int *conv_table, size_t table_size) { char *line = NULL; while(!feof(in)) { line = getaline(in); if(line && *line && *line != CSV_COMMENT_CHAR) csv_parse_line(line, conv_table, table_size); xfree(line); } return 0; } static int csv_parse_file(FILE *in) { return csv_parse_file_common(in, csv_conv_table, CSV_TABLE_SIZE(csv_conv_table)); } static int allcsv_parse_file(FILE *in) { return csv_parse_file_common(in, allcsv_conv_table, CSV_TABLE_SIZE(allcsv_conv_table)); } static int palmcsv_parse_file(FILE *in) { return csv_parse_file_common(in, palmcsv_conv_table, CSV_TABLE_SIZE(palmcsv_conv_table)); } /* * end of csv import filter */ /* * csv addressbook export filters */ #define CSV_LAST (-1) #define CSV_UNDEFINED (-2) #define CSV_SPECIAL(X) (-3 - (X)) #define CSV_IS_SPECIAL(X) ((X) <= -3) static int csv_export_common(FILE *out, struct db_enumerator e, int fields[], void (*special_func)(FILE *, int, int)) { int i; db_enumerate_items(e) { for(i = 0; fields[i] != CSV_LAST; i++) { if(fields[i] == CSV_UNDEFINED) fprintf(out, "\"\""); else if(CSV_IS_SPECIAL(fields[i])) { if(special_func) (*special_func)(out, e.item, fields[i]); } else /*fprintf(out,( strchr(safe_str(database[e.item][field_idx(fields[i])]), ',') || strchr(safe_str(database[e.item][field_idx(fields[i])]), '\"')) ? "\"%s\"" : "%s", safe_str(database[e.item][field_idx(fields[i])]) );*/ fprintf(out, "\"%s\"", safe_str(db_fget(e.item,fields[i]))); if(fields[i + 1] != CSV_LAST) fputc(',', out); } fputc('\n', out); } return 0; } static int csv_export_database(FILE *out, struct db_enumerator e) { int csv_export_fields[] = { NAME, EMAIL, PHONE, NOTES, NICK, CSV_LAST }; csv_export_common(out, e, csv_export_fields, NULL); return 0; } static int allcsv_export_database(FILE *out, struct db_enumerator e) { /* * TODO: Should get these atomatically from abook_fileds * - JH */ int allcsv_export_fields[] = { NAME, EMAIL, ADDRESS, ADDRESS2, CITY, STATE, ZIP, COUNTRY, PHONE, WORKPHONE, FAX, MOBILEPHONE, NICK, URL, NOTES, ANNIVERSARY, CSV_LAST }; fprintf(out, "#"); fprintf(out, "\"NAME\","); fprintf(out, "\"EMAIL\","); fprintf(out, "\"ADDRESS\","); fprintf(out, "\"ADDRESS2\","); fprintf(out, "\"CITY\","); fprintf(out, "\"STATE\","); fprintf(out, "\"ZIP\","); fprintf(out, "\"COUNTRY\","); fprintf(out, "\"PHONE\","); fprintf(out, "\"WORKPHONE\","); fprintf(out, "\"FAX\","); fprintf(out, "\"MOBILEPHONE\","); fprintf(out, "\"NICK\","); fprintf(out, "\"URL\","); fprintf(out, "\"NOTES\","); fprintf(out, "\"ANNIVERSARY\"\n"); csv_export_common(out, e, allcsv_export_fields, NULL); return 0; } /* * palm csv */ #define PALM_CSV_NAME CSV_SPECIAL(0) #define PALM_CSV_END CSV_SPECIAL(1) #define PALM_CSV_CAT CSV_SPECIAL(2) static void palm_split_and_write_name(FILE *out, char *name) { char *p; assert(name); if ( (p = strchr(name, ' ')) ) { /* * last name first */ fprintf(out, "\"%s\",\"" , p + 1); fwrite((void *)name, p - name, sizeof(char), out); fputc('\"', out); } else { fprintf(out, "\"%s\"", safe_str(name)); } } static void palm_csv_handle_specials(FILE *out, int item, int field) { switch(field) { case PALM_CSV_NAME: palm_split_and_write_name(out, db_name_get(item)); break; case PALM_CSV_CAT: fprintf(out, "\"abook\""); break; case PALM_CSV_END: fprintf(out, "\"0\""); break; default: assert(0); } } static int palm_export_database(FILE *out, struct db_enumerator e) { int palm_export_fields[] = { PALM_CSV_NAME, /* LASTNAME, FIRSTNAME */ CSV_UNDEFINED, /* TITLE */ CSV_UNDEFINED, /* COMPANY */ WORKPHONE, /* WORK PHONE */ PHONE, /* HOME PHONE */ FAX, /* FAX */ MOBILEPHONE, /* OTHER */ EMAIL, /* EMAIL */ ADDRESS, /* ADDRESS */ CITY, /* CITY */ STATE, /* STATE */ ZIP, /* ZIP */ COUNTRY, /* COUNTRY */ NICK, /* DEFINED 1 */ URL, /* DEFINED 2 */ CSV_UNDEFINED, /* DEFINED 3 */ CSV_UNDEFINED, /* DEFINED 4 */ NOTES, /* NOTE */ PALM_CSV_END, /* "0" */ PALM_CSV_CAT, /* CATEGORY */ CSV_LAST }; csv_export_common(out, e, palm_export_fields, palm_csv_handle_specials); return 0; } /* * end of csv export filters */ /* * GnomeCard (VCard) addressbook export filter */ static int gcrd_export_database(FILE *out, struct db_enumerator e) { int j; char *name, *tmp; abook_list *emails, *em; db_enumerate_items(e) { fprintf(out, "BEGIN:VCARD\r\nFN:%s\r\n", safe_str(db_name_get(e.item))); name = get_surname(db_name_get(e.item)); for( j = strlen(db_name_get(e.item)) - 1; j >= 0; j-- ) { if((db_name_get(e.item))[j] == ' ') break; } fprintf(out, "N:%s;%.*s\r\n", safe_str(name), j, safe_str(db_name_get(e.item)) ); free(name); if(db_fget(e.item, ADDRESS)) fprintf(out, "ADR:;;%s;%s;%s;%s;%s;%s\r\n", safe_str(db_fget(e.item, ADDRESS)), safe_str(db_fget(e.item, ADDRESS2)), safe_str(db_fget(e.item, CITY)), safe_str(db_fget(e.item, STATE)), safe_str(db_fget(e.item, ZIP)), safe_str(db_fget(e.item, COUNTRY)) ); if(db_fget(e.item, PHONE)) fprintf(out, "TEL;HOME:%s\r\n", db_fget(e.item, PHONE)); if(db_fget(e.item, WORKPHONE)) fprintf(out, "TEL;WORK:%s\r\n", db_fget(e.item, WORKPHONE)); if(db_fget(e.item, FAX)) fprintf(out, "TEL;FAX:%s\r\n", db_fget(e.item, FAX)); if(db_fget(e.item, MOBILEPHONE)) fprintf(out, "TEL;CELL:%s\r\n", db_fget(e.item, MOBILEPHONE)); tmp = db_email_get(e.item); if(*tmp) { emails = csv_to_abook_list(tmp); for(em = emails; em; em = em->next) fprintf(out, "EMAIL;INTERNET:%s\r\n", em->data); abook_list_free(&emails); } free(tmp); if(db_fget(e.item, NOTES)) fprintf(out, "NOTE:%s\r\n", db_fget(e.item, NOTES)); if(db_fget(e.item, URL)) fprintf(out, "URL:%s\r\n", db_fget(e.item, URL)); fprintf(out, "END:VCARD\r\n\r\n"); } return 0; } /* * end of GnomeCard export filter */ /* * mutt alias export filter */ static char * mutt_alias_genalias(int i) { char *tmp, *pos; if(db_fget(i, NICK)) return xstrdup(db_fget(i, NICK)); tmp = xstrdup(db_name_get(i)); if( ( pos = strchr(tmp, ' ') ) ) *pos = 0; strlower(tmp); return tmp; } static int mutt_alias_export(FILE *out, struct db_enumerator e) { char email[MAX_EMAIL_LEN]; char *alias = NULL; db_enumerate_items(e) { alias = mutt_alias_genalias(e.item); get_first_email(email, e.item); fprintf(out, *email ? "alias %s %s <%s>\n": "alias %s %s%s\n", alias, db_name_get(e.item), email); xfree(alias); } return 0; } /* * end of mutt alias export filter */ /* * printable export filter */ static void text_write_address_us(FILE *out, int i) { fprintf(out, "\n%s", db_fget(i, ADDRESS)); if(db_fget(i, ADDRESS2)) fprintf(out, "\n%s", db_fget(i, ADDRESS2)); if(db_fget(i, CITY)) fprintf(out, "\n%s", db_fget(i, CITY)); if(db_fget(i, STATE) || db_fget(i, ZIP)) { fputc('\n', out); if(db_fget(i, STATE)) { fprintf(out, "%s", db_fget(i, STATE)); if(db_fget(i, ZIP)) fputc(' ', out); } if(db_fget(i, ZIP)) fprintf(out, "%s", db_fget(i, ZIP)); } if(db_fget(i, COUNTRY)) fprintf(out, "\n%s", db_fget(i, COUNTRY)); } static void text_write_address_uk(FILE *out, int i) { int j; for(j = ADDRESS; j <= COUNTRY; j++) if(db_fget(i, j)) fprintf(out, "\n%s", db_fget(i, j)); } static void text_write_address_eu(FILE *out, int i) { fprintf(out, "\n%s", db_fget(i, ADDRESS)); if(db_fget(i, ADDRESS2)) fprintf(out, "\n%s", db_fget(i, ADDRESS2)); if(db_fget(i, ZIP) || db_fget(i, CITY)) { fputc('\n', out); if(db_fget(i, ZIP)) { fprintf(out, "%s", db_fget(i, ZIP)); if(db_fget(i, CITY)) fputc(' ', out); } fprintf(out, "%s", safe_str(db_fget(i, CITY))); } if(db_fget(i, STATE)) fprintf(out, "\n%s", db_fget(i, STATE)); if(db_fget(i, COUNTRY)) fprintf(out, "\n%s", db_fget(i, COUNTRY)); } static int text_export_database(FILE * out, struct db_enumerator e) { abook_list *emails, *em; int j; char *realname = get_real_name(), *str = NULL, *tmp; char *style = opt_get_str(STR_ADDRESS_STYLE); fprintf(out, "-----------------------------------------\n%s's address book\n" "-----------------------------------------\n\n\n", realname); free(realname); db_enumerate_items(e) { fprintf(out, "-----------------------------------------\n\n"); fprintf(out, "%s", db_name_get(e.item)); if(db_fget(e.item, NICK) && *db_fget(e.item, NICK)) fprintf(out, "\n(%s)", db_fget(e.item, NICK)); fprintf(out, "\n"); tmp = db_email_get(e.item); if(*tmp) { emails = csv_to_abook_list(tmp); fprintf(out, "\n"); for(em = emails; em; em = em->next) fprintf(out, "%s\n", em->data); abook_list_free(&emails); } free(tmp); /* Print address */ if(db_fget(e.item, ADDRESS)) { if(!safe_strcmp(style, "us")) /* US like */ text_write_address_us(out, e.item); else if(!safe_strcmp(style, "uk")) /* UK like */ text_write_address_uk(out, e.item); else /* EU like */ text_write_address_eu(out, e.item); fprintf(out, "\n"); } if((db_fget(e.item, PHONE)) || (db_fget(e.item, WORKPHONE)) || (db_fget(e.item, FAX)) || (db_fget(e.item, MOBILEPHONE))) { fprintf(out, "\n"); for(j = PHONE; j <= MOBILEPHONE; j++) if(db_fget(e.item, j)) { get_field_info(field_id(j), NULL, &str, NULL); fprintf(out, "%s: %s\n", str, db_fget(e.item, j)); } } if(db_fget(e.item, URL)) fprintf(out, "\n%s\n", db_fget(e.item, URL)); if(db_fget(e.item, NOTES)) fprintf(out, "\n%s\n", db_fget(e.item, NOTES)); fprintf(out, "\n"); } fprintf(out, "-----------------------------------------\n"); return 0; } /* * end of printable export filter */ /* * elm alias export filter */ static int elm_alias_export(FILE *out, struct db_enumerator e) { char email[MAX_EMAIL_LEN]; char *alias = NULL; db_enumerate_items(e) { alias = mutt_alias_genalias(e.item); get_first_email(email, e.item); fprintf(out, "%s = %s = %s\n",alias,db_name_get(e.item),email); xfree(alias); } return 0; } /* * end of elm alias export filter */ /* * Spruce export filter */ static int spruce_export_database (FILE *out, struct db_enumerator e) { char email[MAX_EMAIL_LEN]; fprintf(out, "# This is a generated file made by abook for the Spruce e-mail client.\n\n"); db_enumerate_items(e) { get_first_email(email, e.item); if(strcmp(email, "")) { fprintf(out, "# Address %d\nName: %s\nEmail: %s\nMemo: %s\n\n", e.item, db_name_get(e.item), email, safe_str(db_fget(e.item, NOTES)) ); } } fprintf (out, "# End of address book file.\n"); return 0; } /* * end of Spruce export filter */ /* * wanderlust addressbook export filter */ static int wl_export_database(FILE *out, struct db_enumerator e) { char email[MAX_EMAIL_LEN]; fprintf(out, "# Wanderlust address book written by %s\n\n", PACKAGE); db_enumerate_items(e) { get_first_email(email, e.item); if(*email) { fprintf(out, "%s\t\"%s\"\t\"%s\"\n", email, safe_str(db_fget(e.item, NICK)), safe_str(db_name_get(e.item)) ); } } fprintf (out, "\n# End of address book file.\n"); return 0; } /* * end of wanderlust addressbook export filter */ /* * BSD calendar export filter */ static int bsdcal_export_database(FILE *out, struct db_enumerator e) { db_enumerate_items(e) { int year, month = 0, day = 0; char *anniversary = db_fget(e.item, ANNIVERSARY); if(anniversary) { parse_date_string(anniversary, &day, &month, &year); fprintf(out, _("%02d/%02d\tAnniversary of %s\n"), month, day, safe_str(db_name_get(e.item)) ); } } return 0; } /* * end of BSD calendar export filter */ abook-0.6.0pre2/getname.c000644 000764 000764 00000021676 10272406674 015763 0ustar00jaakkojaakko000000 000000 /* * This code was taken from hypermail http://www.hypermail.org/ * * license: GNU GENERAL PUBLIC LICENSE, Version 2 * * modified by Jaakko Heinonen */ #include #include #include /*#include "hypermail.h"*/ #include "getname.h" /*#include "setup.h"*/ /*extern char *set_domainaddr;*/ const char *set_domainaddr = ""; const int use_domainaddr = 0; #define NAMESTRLEN 80 #define MAILSTRLEN 80 #define NONAME "(no name)" #define NOEMAIL "(no email)" #ifndef FALSE # define FALSE 0 #endif #ifndef TRUE # define TRUE 1 #endif #define hm_strchr(X, XX) strchr(X, XX) #define strsav(X) ((X == NULL) ? strdup("") : strdup(X)) /*const int set_iso2022jp = 0;*/ void strcpymax(char *dest, const char *src, int n) { int i; if (n) { n--; /* decrease one to allow for the termination byte */ for (i = 0; *src && (i < n); i++) *dest++ = *src++; } *dest = 0; } static int blankstring(char *str) { register char *cp; for (cp = str; *cp; cp++) { if (*cp != ' ' && *cp != '\t' && *cp != '\r' && *cp != '\n') return (0); } return (1); } #if 0 char * spamify(char *input) { /* we should replace the @-letter in the email address */ int newlen = strlen(input) + 4; char *atptr = strchr(input, '@'); if (atptr) { char *newbuf = malloc(newlen); int index = atptr - input; /* copy the part before the @ */ memcpy(newbuf, input, index); /* append _at_ */ memcpy(newbuf + index, "_at_", 4); /* append the part after the @ */ strcpy(newbuf + index + 4, input + index + 1); /* correct the pointer and free the old */ free(input); return newbuf; } /* weird email, bail out */ return input; } #endif /* ** Grabs the name and email address from a From: header. ** This could get tricky; I've tried to keep it simple. ** Should be able to handle all the addresses below: ** ** From: user [no @] ** From: kent (Kent Landfield) [no @ - with comment] ** From: [no text name, use email as text name] ** From: Kent Landfield [text name but no @] ** From: (kent) [comment - no email address] ** From: "" [email address but null comment] ** From: [blank From: line] ** From: uu.net!kent [uucp addresses - no comment] ** From: uu.net!kent (kent) [uucp addresses - with comment] ** From: "(Joe Bloggs)" ** From: "Roy T. Fielding" ** From: kent@localhost ** From: kent@uu.net (Kent Landfield) ** From: (George Burgyan) ** From: (George Burgyan) ** From: Kent B. Landfield ** From: IN%"fekete+reply@c2.net" 26-JAN-1997 13:28:55.36 ** From: IN%"vicric@panix.com" "Vicki Richman" 13-AUG-1996 10:54:33.38 ** From: US2RMC::"lwv26@cas.org" "Larry W. Virden, x2487" 22-OCT-1994 09:44:21.44 ** From: Mail Delivery Subsystem ** From: Self ** From: adam@eden.apana.org.au (Adam Frey) ** From: faqserv@penguin-lust.mit.edu ** From: nc0548@freebsd.netcom.com (Mark Hittinger) ** From: "- Pam Greene, one of the *.answers moderators" ** From: "Felan shena Thoron'edras" ** From: David Muir Sharnoff ** From: A.J.Doherty@reading.ac.uk (Andy Doherty) ** From: Jordan Hubbard ** From: ZXPAN%SLACVM.BITNET@MITVMA.MIT.EDU ** From: afs!piz!alf@uu5.psi.com (Alf the Poet) ** From: answers@cp.tn.tudelft.nl ("Moderator *.answers") ** From: mdw%merengue@merengue.oit.unc.edu (Matt Welsh) ** From: bgoffe@whale.st.usm.edu (William L. Goffe) ** ** This is an interesting new one (1998-11-26): ** From: Name.Hidden@era.ericsson.se */ void getname(char *line, char **namep, char **emailp) { int i; int len; char *c; int comment_fnd; char email[MAILSTRLEN]; char name[NAMESTRLEN]; len = MAILSTRLEN - 1; comment_fnd = 0; /* * Zero out data storage. */ memset(email, 0, MAILSTRLEN); memset(name, 0, NAMESTRLEN); *namep = NULL; *emailp = NULL; /* EMail Processing First: ** First, is there an '@' sign we can use as an anchor ? */ if ((c = hm_strchr(line, '@')) == NULL) { /* ** No '@' sign here so ... */ if (strchr(line, '(')) { /* From: bob (The Big Guy) */ c = strchr(line, ':') + 1; while (*c == ' ' || *c == '\t') c++; for (i = 0; *c && *c != '(' && *c != ' ' && *c != '\t' && *c != '\n' && i < len; c++) email[i++] = *c; email[i] = '\0'; } else if ((c = strchr(line, '<'))) { /* From: */ c++; for (i = 0; *c && *c != '>' && *c != ' ' && *c != '\t' && *c != '\n' && i < len; c++) email[i++] = *c; email[i] = '\0'; } else { /* * - check to see if the From: line is blank, (taken care of) * - check if From: uu.net!kent formatted line * - check if "From: kent" formatted line */ c = strchr(line, ':') + 1; while (*c == ' ' || *c == '\t') c++; for (i = 0; *c && *c != ' ' && *c != '\t' && *c != '\n' && *c != ',' && i < len; c++) email[i++] = *c; email[i] = '\0'; } if (email[0] == '\0') /* Was it a junk From line ? */ strcpymax(email, NOEMAIL, MAILSTRLEN); else if (use_domainaddr) { /* * check if site domainizes addresses * but don't modify uucp addresses */ if ((c = strchr(email, '!')) == NULL) { strcat(email, "@"); strcat(email, set_domainaddr); } } } else { while (*c != ' ' && *c != '\t' && *c != '<' && *c != '"' && *c != ':') c--; c++; for (i = 0; *c && *c != '>' && *c != ' ' && *c != '\t' && *c != '"' && *c != '\n' && *c != ']' && *c != ',' && i < len; c++) email[i++] = *c; email[i] = '\0'; } /* * NAME Processing - Boy are there a bunch of funky formats here. * No promises... I'll do my best. Let me know * what I missed... */ if (strchr(line, '<')) { c = strchr(line, ':') + 1; while (*c == ' ' || *c == '\t') c++; /* if a comment then just look for the end point */ if (*c == '\"') { int rmparen = 0; ++c; if (*c == '(') { ++c; rmparen = 1; } for (i = 0, len = NAMESTRLEN - 1; *c && *c != '\"' && *c != '\n' && i < len; c++) name[i++] = *c; if (rmparen && name[(i - 1)] == ')') --i; /* get rid of "(name-comment)" parens */ comment_fnd = 1; } else if (hm_strchr(line, '(')) { c = hm_strchr(line, '(') + 1; if (*c == '"') /* is there a comment in the comment ? */ c++; } else if (*c == '<') { /* Comment may be on the end */ /* From: Bill Campbell */ c = strchr(line, '>') + 1; for (i = 0, len = NAMESTRLEN - 1; *c && *c != '\n' && i < len; c++) name[i++] = *c; comment_fnd = 1; } } else if (strchr(line, '(')) { c = strchr(line, '('); c++; if (*c == '"') /* is there a comment in the comment ? */ c++; while (*c == ' ' || *c == '\t') c++; } else if (strchr(line, '[')) { c = strchr(line, ':') + 1; while (*c == ' ' || *c == '\t') c++; for (i = 0, len = NAMESTRLEN - 1; *c && *c != '\"' && *c != '[' && *c != '\n' && i < len; c++) name[i++] = *c; name[--i] = '\0'; comment_fnd = 1; } else { /* * Is there an email address available * that we can use for the name ? */ if (!strcmp(email, NOEMAIL)) /* No */ strcpymax(name, NONAME, NAMESTRLEN); else { c = email + strlen(email) - 1; while (isspace((unsigned char) *c)) *c-- = '\0'; strcpymax(name, email, NAMESTRLEN); /* Yes */ } *namep = strsav(name); *emailp = strsav(email); return; } if (!comment_fnd) { /*int in_ascii = TRUE, esclen = 0; */ for (i = 0, len = NAMESTRLEN - 1; *c && *c != '<' && *c != '\"' && *c != ')' && *c != '(' && *c != '\n' && i < len; c++) { /*if (set_iso2022jp) { iso2022_state(c, &in_ascii, &esclen); if (esclen) { for (; esclen; esclen--, c++) name[i++] = *c; for (; in_ascii == FALSE && i < len; c++, iso2022_state(c, &in_ascii, &esclen)) { name[i++] = *c; } c--; } else { name[i++] = *c; } } else { */ name[i++] = *c; /*} */ } } if (i > 0 && name[i - 1] == ' ' && (*c == '<' || *c == '(')) name[--i] = '\0'; else name[i] = '\0'; /* * Is the name string blank ? If so then * force it to get filled with something. */ if (blankstring(name)) name[0] = '\0'; /* Bailing and taking the easy way out... */ if (name[0] == '\0') { if (email[0] == '\0') strcpymax(name, NONAME, NAMESTRLEN); else strcpymax(name, email, NAMESTRLEN); } /* * need to strip spaces off the end of * the email and name strings */ c = email + (strlen(email) - 1); while (c > email && isspace((unsigned char) *c)) *c-- = '\0'; *namep = strsav(name); *emailp = strsav(email); } abook-0.6.0pre2/getopt.c000644 000764 000764 00000067525 10272406674 015650 0ustar00jaakkojaakko000000 000000 /* Getopt for GNU. NOTE: getopt is now part of the C library, so if you don't know what "Keep this file name-space clean" means, talk to roland@gnu.ai.mit.edu before changing it! Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97 Free Software Foundation, Inc. This file is part of the GNU C Library. Its master source is NOT part of the C library, however. The master source lives in /gd/gnu/lib. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with the GNU C Library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* This tells Alpha OSF/1 not to define a getopt prototype in . Ditto for AIX 3.2 and . */ #ifndef _NO_PROTO #define _NO_PROTO #endif #ifdef HAVE_CONFIG_H #include #endif #if !defined (__STDC__) || !__STDC__ /* This is a separate conditional since some stdc systems reject `defined (const)'. */ #ifndef const #define const #endif #endif #include #include /* Comment out all this code if we are using the GNU C Library, and are not actually compiling the library itself. This code is part of the GNU C Library, but also included in many other GNU distributions. Compiling and linking in this code is a waste when using the GNU C library (especially if it is a shared library). Rather than having every GNU program understand `configure --with-gnu-libc' and omit the object files, it is simpler to just do this in the source for each such file. */ #define GETOPT_INTERFACE_VERSION 2 #if !defined (_LIBC) && defined (__GLIBC__) && __GLIBC__ >= 2 #include #if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION #define ELIDE_CODE #endif #endif #ifndef ELIDE_CODE /* This needs to come after some library #include to get __GNU_LIBRARY__ defined. */ #ifdef __GNU_LIBRARY__ /* Don't include stdlib.h for non-GNU C libraries because some of them contain conflicting prototypes for getopt. */ #include #include #endif /* GNU C library. */ #ifdef VMS #include #if HAVE_STRING_H - 0 #include #endif #endif #if defined (WIN32) && !defined (__CYGWIN32__) /* It's not Unix, really. See? Capital letters. */ #include #define getpid() GetCurrentProcessId() #endif #ifndef _ /* This is for other GNU distributions with internationalized messages. When compiling libc, the _ macro is predefined. */ #ifdef HAVE_LIBINTL_H #include #define _(msgid) gettext (msgid) #else #define _(msgid) (msgid) #endif #endif /* This version of `getopt' appears to the caller like standard Unix `getopt' but it behaves differently for the user, since it allows the user to intersperse the options with the other arguments. As `getopt' works, it permutes the elements of ARGV so that, when it is done, all the options precede everything else. Thus all application programs are extended to handle flexible argument order. Setting the environment variable POSIXLY_CORRECT disables permutation. Then the behavior is completely standard. GNU application programs can use a third alternative mode in which they can distinguish the relative order of options and other arguments. */ #include "getopt.h" /* For communication from `getopt' to the caller. When `getopt' finds an option that takes an argument, the argument value is returned here. Also, when `ordering' is RETURN_IN_ORDER, each non-option ARGV-element is returned here. */ char *optarg = NULL; /* Index in ARGV of the next element to be scanned. This is used for communication to and from the caller and for communication between successive calls to `getopt'. On entry to `getopt', zero means this is the first call; initialize. When `getopt' returns -1, this is the index of the first of the non-option elements that the caller should itself scan. Otherwise, `optind' communicates from one call to the next how much of ARGV has been scanned so far. */ /* 1003.2 says this must be 1 before any call. */ int optind = 1; /* Formerly, initialization of getopt depended on optind==0, which causes problems with re-calling getopt as programs generally don't know that. */ int __getopt_initialized = 0; /* The next char to be scanned in the option-element in which the last option character we returned was found. This allows us to pick up the scan where we left off. If this is zero, or a null string, it means resume the scan by advancing to the next ARGV-element. */ static char *nextchar; /* Callers store zero here to inhibit the error message for unrecognized options. */ int opterr = 1; /* Set to an option character which was unrecognized. This must be initialized on some systems to avoid linking in the system's own getopt implementation. */ int optopt = '?'; /* Describe how to deal with options that follow non-option ARGV-elements. If the caller did not specify anything, the default is REQUIRE_ORDER if the environment variable POSIXLY_CORRECT is defined, PERMUTE otherwise. REQUIRE_ORDER means don't recognize them as options; stop option processing when the first non-option is seen. This is what Unix does. This mode of operation is selected by either setting the environment variable POSIXLY_CORRECT, or using `+' as the first character of the list of option characters. PERMUTE is the default. We permute the contents of ARGV as we scan, so that eventually all the non-options are at the end. This allows options to be given in any order, even with programs that were not written to expect this. RETURN_IN_ORDER is an option available to programs that were written to expect options and other ARGV-elements in any order and that care about the ordering of the two. We describe each non-option ARGV-element as if it were the argument of an option with character code 1. Using `-' as the first character of the list of option characters selects this mode of operation. The special argument `--' forces an end of option-scanning regardless of the value of `ordering'. In the case of RETURN_IN_ORDER, only `--' can cause `getopt' to return -1 with `optind' != ARGC. */ static enum { REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER } ordering; /* Value of POSIXLY_CORRECT environment variable. */ static char *posixly_correct; #ifdef __GNU_LIBRARY__ /* We want to avoid inclusion of string.h with non-GNU libraries because there are many ways it can cause trouble. On some systems, it contains special magic macros that don't work in GCC. */ #include #define my_index strchr #else /* Avoid depending on library functions or files whose names are inconsistent. */ char *getenv(); static char * my_index(str, chr) const char *str; int chr; { while (*str) { if (*str == chr) return (char *) str; str++; } return 0; } /* If using GCC, we can safely declare strlen this way. If not using GCC, it is ok not to declare it. */ #ifdef __GNUC__ /* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h. That was relevant to code that was here before. */ #if !defined (__STDC__) || !__STDC__ /* gcc with -traditional declares the built-in strlen to return int, and has done so at least since version 2.4.5. -- rms. */ extern int strlen(const char *); #endif /* not __STDC__ */ #endif /* __GNUC__ */ #endif /* not __GNU_LIBRARY__ */ /* Handle permutation of arguments. */ /* Describe the part of ARGV that contains non-options that have been skipped. `first_nonopt' is the index in ARGV of the first of them; `last_nonopt' is the index after the last of them. */ static int first_nonopt; static int last_nonopt; #ifdef _LIBC /* Bash 2.0 gives us an environment variable containing flags indicating ARGV elements that should not be considered arguments. */ static const char *nonoption_flags; static int nonoption_flags_len; static int original_argc; static char *const *original_argv; /* Make sure the environment variable bash 2.0 puts in the environment is valid for the getopt call we must make sure that the ARGV passed to getopt is that one passed to the process. */ static void store_args(int argc, char *const *argv) __attribute__((unused)); static void store_args(int argc, char *const *argv) { /* XXX This is no good solution. We should rather copy the args so that we can compare them later. But we must not use malloc(3). */ original_argc = argc; original_argv = argv; } text_set_element(__libc_subinit, store_args); #endif /* Exchange two adjacent subsequences of ARGV. One subsequence is elements [first_nonopt,last_nonopt) which contains all the non-options that have been skipped so far. The other is elements [last_nonopt,optind), which contains all the options processed since those non-options were skipped. `first_nonopt' and `last_nonopt' are relocated so that they describe the new indices of the non-options in ARGV after they are moved. */ #if defined (__STDC__) && __STDC__ static void exchange(char **); #endif static void exchange(argv) char **argv; { int bottom = first_nonopt; int middle = last_nonopt; int top = optind; char *tem; /* Exchange the shorter segment with the far end of the longer segment. That puts the shorter segment into the right place. It leaves the longer segment in the right place overall, but it consists of two parts that need to be swapped next. */ while (top > middle && middle > bottom) { if (top - middle > middle - bottom) { /* Bottom segment is the short one. */ int len = middle - bottom; register int i; /* Swap it with the top part of the top segment. */ for (i = 0; i < len; i++) { tem = argv[bottom + i]; argv[bottom + i] = argv[top - (middle - bottom) + i]; argv[top - (middle - bottom) + i] = tem; } /* Exclude the moved bottom segment from further swapping. */ top -= len; } else { /* Top segment is the short one. */ int len = top - middle; register int i; /* Swap it with the bottom part of the bottom segment. */ for (i = 0; i < len; i++) { tem = argv[bottom + i]; argv[bottom + i] = argv[middle + i]; argv[middle + i] = tem; } /* Exclude the moved top segment from further swapping. */ bottom += len; } } /* Update records for the slots the non-options now occupy. */ first_nonopt += (optind - last_nonopt); last_nonopt = optind; } /* Initialize the internal data when the first call is made. */ #if defined (__STDC__) && __STDC__ static const char *_getopt_initialize(int, char *const *, const char *); #endif static const char * _getopt_initialize(argc, argv, optstring) int argc; char *const *argv; const char *optstring; { /* Start processing options with ARGV-element 1 (since ARGV-element 0 is the program name); the sequence of previously skipped non-option ARGV-elements is empty. */ first_nonopt = last_nonopt = optind = 1; nextchar = NULL; posixly_correct = getenv("POSIXLY_CORRECT"); /* Determine how to handle the ordering of options and nonoptions. */ if (optstring[0] == '-') { ordering = RETURN_IN_ORDER; ++optstring; } else if (optstring[0] == '+') { ordering = REQUIRE_ORDER; ++optstring; } else if (posixly_correct != NULL) ordering = REQUIRE_ORDER; else ordering = PERMUTE; #ifdef _LIBC if (posixly_correct == NULL && argc == original_argc && argv == original_argv) { /* Bash 2.0 puts a special variable in the environment for each command it runs, specifying which ARGV elements are the results of file name wildcard expansion and therefore should not be considered as options. */ char var[100]; sprintf(var, "_%d_GNU_nonoption_argv_flags_", getpid()); nonoption_flags = getenv(var); if (nonoption_flags == NULL) nonoption_flags_len = 0; else nonoption_flags_len = strlen(nonoption_flags); } else nonoption_flags_len = 0; #endif return optstring; } /* Scan elements of ARGV (whose length is ARGC) for option characters given in OPTSTRING. If an element of ARGV starts with '-', and is not exactly "-" or "--", then it is an option element. The characters of this element (aside from the initial '-') are option characters. If `getopt' is called repeatedly, it returns successively each of the option characters from each of the option elements. If `getopt' finds another option character, it returns that character, updating `optind' and `nextchar' so that the next call to `getopt' can resume the scan with the following option character or ARGV-element. If there are no more option characters, `getopt' returns -1. Then `optind' is the index in ARGV of the first ARGV-element that is not an option. (The ARGV-elements have been permuted so that those that are not options now come last.) OPTSTRING is a string containing the legitimate option characters. If an option character is seen that is not listed in OPTSTRING, return '?' after printing an error message. If you set `opterr' to zero, the error message is suppressed but we still return '?'. If a char in OPTSTRING is followed by a colon, that means it wants an arg, so the following text in the same ARGV-element, or the text of the following ARGV-element, is returned in `optarg'. Two colons mean an option that wants an optional arg; if there is text in the current ARGV-element, it is returned in `optarg', otherwise `optarg' is set to zero. If OPTSTRING starts with `-' or `+', it requests different methods of handling the non-option ARGV-elements. See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above. Long-named options begin with `--' instead of `-'. Their names may be abbreviated as long as the abbreviation is unique or is an exact match for some defined option. If they have an argument, it follows the option name in the same ARGV-element, separated from the option name by a `=', or else the in next ARGV-element. When `getopt' finds a long-named option, it returns 0 if that option's `flag' field is nonzero, the value of the option's `val' field if the `flag' field is zero. The elements of ARGV aren't really const, because we permute them. But we pretend they're const in the prototype to be compatible with other systems. LONGOPTS is a vector of `struct option' terminated by an element containing a name which is zero. LONGIND returns the index in LONGOPT of the long-named option found. It is only valid when a long-named option has been found by the most recent call. If LONG_ONLY is nonzero, '-' as well as '--' can introduce long-named options. */ int _getopt_internal(argc, argv, optstring, longopts, longind, long_only) int argc; char *const *argv; const char *optstring; const struct option *longopts; int *longind; int long_only; { optarg = NULL; if (!__getopt_initialized || optind == 0) { optstring = _getopt_initialize(argc, argv, optstring); optind = 1; /* Don't scan ARGV[0], the program name. */ __getopt_initialized = 1; } /* Test whether ARGV[optind] points to a non-option argument. Either it does not have option syntax, or there is an environment flag from the shell indicating it is not an option. The later information is only used when the used in the GNU libc. */ #ifdef _LIBC #define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0' \ || (optind < nonoption_flags_len \ && nonoption_flags[optind] == '1')) #else #define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0') #endif if (nextchar == NULL || *nextchar == '\0') { /* Advance to the next ARGV-element. */ /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been moved back by the user (who may also have changed the arguments). */ if (last_nonopt > optind) last_nonopt = optind; if (first_nonopt > optind) first_nonopt = optind; if (ordering == PERMUTE) { /* If we have just processed some options following some non-options, exchange them so that the options come first. */ if (first_nonopt != last_nonopt && last_nonopt != optind) exchange((char **) argv); else if (last_nonopt != optind) first_nonopt = optind; /* Skip any additional non-options and extend the range of non-options previously skipped. */ while (optind < argc && NONOPTION_P) optind++; last_nonopt = optind; } /* The special ARGV-element `--' means premature end of options. Skip it like a null option, then exchange with previous non-options as if it were an option, then skip everything else like a non-option. */ if (optind != argc && !strcmp(argv[optind], "--")) { optind++; if (first_nonopt != last_nonopt && last_nonopt != optind) exchange((char **) argv); else if (first_nonopt == last_nonopt) first_nonopt = optind; last_nonopt = argc; optind = argc; } /* If we have done all the ARGV-elements, stop the scan and back over any non-options that we skipped and permuted. */ if (optind == argc) { /* Set the next-arg-index to point at the non-options that we previously skipped, so the caller will digest them. */ if (first_nonopt != last_nonopt) optind = first_nonopt; return -1; } /* If we have come to a non-option and did not permute it, either stop the scan or describe it to the caller and pass it by. */ if (NONOPTION_P) { if (ordering == REQUIRE_ORDER) return -1; optarg = argv[optind++]; return 1; } /* We have found another option-ARGV-element. Skip the initial punctuation. */ nextchar = (argv[optind] + 1 + (longopts != NULL && argv[optind][1] == '-')); } /* Decode the current option-ARGV-element. */ /* Check whether the ARGV-element is a long option. If long_only and the ARGV-element has the form "-f", where f is a valid short option, don't consider it an abbreviated form of a long option that starts with f. Otherwise there would be no way to give the -f short option. On the other hand, if there's a long option "fubar" and the ARGV-element is "-fu", do consider that an abbreviation of the long option, just like "--fu", and not "-f" with arg "u". This distinction seems to be the most useful approach. */ if (longopts != NULL && (argv[optind][1] == '-' || (long_only && (argv[optind][2] || !my_index(optstring, argv[optind][1]))))) { char *nameend; const struct option *p; const struct option *pfound = NULL; int exact = 0; int ambig = 0; int indfound = -1; int option_index; for (nameend = nextchar; *nameend && *nameend != '='; nameend++) /* Do nothing. */ ; /* Test all long options for either exact match or abbreviated matches. */ for (p = longopts, option_index = 0; p->name; p++, option_index++) if (!strncmp(p->name, nextchar, nameend - nextchar)) { if ((unsigned int) (nameend - nextchar) == (unsigned int) strlen(p->name)) { /* Exact match found. */ pfound = p; indfound = option_index; exact = 1; break; } else if (pfound == NULL) { /* First nonexact match found. */ pfound = p; indfound = option_index; } else /* Second or later nonexact match found. */ ambig = 1; } if (ambig && !exact) { if (opterr) fprintf(stderr, _("%s: option `%s' is ambiguous\n"), argv[0], argv[optind]); nextchar += strlen(nextchar); optind++; optopt = 0; return '?'; } if (pfound != NULL) { option_index = indfound; optind++; if (*nameend) { /* Don't test has_arg with >, because some C compilers don't allow it to be used on enums. */ if (pfound->has_arg) optarg = nameend + 1; else { if (opterr) { if (argv[optind - 1][1] == '-') /* --option */ fprintf(stderr, _("%s: option `--%s' doesn't allow an argument\n"), argv[0], pfound->name); else /* +option or -option */ fprintf(stderr, _("%s: option `%c%s' doesn't allow an argument\n"), argv[0], argv[optind - 1][0], pfound->name); } nextchar += strlen(nextchar); optopt = pfound->val; return '?'; } } else if (pfound->has_arg == 1) { if (optind < argc) optarg = argv[optind++]; else { if (opterr) fprintf(stderr, _("%s: option `%s' requires an argument\n"), argv[0], argv[optind - 1]); nextchar += strlen(nextchar); optopt = pfound->val; return optstring[0] == ':' ? ':' : '?'; } } nextchar += strlen(nextchar); if (longind != NULL) *longind = option_index; if (pfound->flag) { *(pfound->flag) = pfound->val; return 0; } return pfound->val; } /* Can't find it as a long option. If this is not getopt_long_only, or the option starts with '--' or is not a valid short option, then it's an error. Otherwise interpret it as a short option. */ if (!long_only || argv[optind][1] == '-' || my_index(optstring, *nextchar) == NULL) { if (opterr) { if (argv[optind][1] == '-') /* --option */ fprintf(stderr, _("%s: unrecognized option `--%s'\n"), argv[0], nextchar); else /* +option or -option */ fprintf(stderr, _("%s: unrecognized option `%c%s'\n"), argv[0], argv[optind][0], nextchar); } nextchar = (char *) ""; optind++; optopt = 0; return '?'; } } /* Look at and handle the next short option-character. */ { char c = *nextchar++; char *temp = my_index(optstring, c); /* Increment `optind' when we start to process its last character. */ if (*nextchar == '\0') ++optind; if (temp == NULL || c == ':') { if (opterr) { if (posixly_correct) /* 1003.2 specifies the format of this message. */ fprintf(stderr, _("%s: illegal option -- %c\n"), argv[0], c); else fprintf(stderr, _("%s: invalid option -- %c\n"), argv[0], c); } optopt = c; return '?'; } /* Convenience. Treat POSIX -W foo same as long option --foo */ if (temp[0] == 'W' && temp[1] == ';') { char *nameend; const struct option *p; const struct option *pfound = NULL; int exact = 0; int ambig = 0; int indfound = 0; int option_index; /* This is an option that requires an argument. */ if (*nextchar != '\0') { optarg = nextchar; /* If we end this ARGV-element by taking the rest as an arg, we must advance to the next element now. */ optind++; } else if (optind == argc) { if (opterr) { /* 1003.2 specifies the format of this message. */ fprintf(stderr, _("%s: option requires an argument -- %c\n"), argv[0], c); } optopt = c; if (optstring[0] == ':') c = ':'; else c = '?'; return c; } else /* We already incremented `optind' once; increment it again when taking next ARGV-elt as argument. */ optarg = argv[optind++]; /* optarg is now the argument, see if it's in the table of longopts. */ for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++) /* Do nothing. */ ; /* Test all long options for either exact match or abbreviated matches. */ for (p = longopts, option_index = 0; p->name; p++, option_index++) if (!strncmp(p->name, nextchar, nameend - nextchar)) { if ((unsigned int) (nameend - nextchar) == strlen(p->name)) { /* Exact match found. */ pfound = p; indfound = option_index; exact = 1; break; } else if (pfound == NULL) { /* First nonexact match found. */ pfound = p; indfound = option_index; } else /* Second or later nonexact match found. */ ambig = 1; } if (ambig && !exact) { if (opterr) fprintf(stderr, _("%s: option `-W %s' is ambiguous\n"), argv[0], argv[optind]); nextchar += strlen(nextchar); optind++; return '?'; } if (pfound != NULL) { option_index = indfound; if (*nameend) { /* Don't test has_arg with >, because some C compilers don't allow it to be used on enums. */ if (pfound->has_arg) optarg = nameend + 1; else { if (opterr) fprintf(stderr, _("\ %s: option `-W %s' doesn't allow an argument\n"), argv[0], pfound->name); nextchar += strlen(nextchar); return '?'; } } else if (pfound->has_arg == 1) { if (optind < argc) optarg = argv[optind++]; else { if (opterr) fprintf(stderr, _("%s: option `%s' requires an argument\n"), argv[0], argv[optind - 1]); nextchar += strlen(nextchar); return optstring[0] == ':' ? ':' : '?'; } } nextchar += strlen(nextchar); if (longind != NULL) *longind = option_index; if (pfound->flag) { *(pfound->flag) = pfound->val; return 0; } return pfound->val; } nextchar = NULL; return 'W'; /* Let the application handle it. */ } if (temp[1] == ':') { if (temp[2] == ':') { /* This is an option that accepts an argument optionally. */ if (*nextchar != '\0') { optarg = nextchar; optind++; } else optarg = NULL; nextchar = NULL; } else { /* This is an option that requires an argument. */ if (*nextchar != '\0') { optarg = nextchar; /* If we end this ARGV-element by taking the rest as an arg, we must advance to the next element now. */ optind++; } else if (optind == argc) { if (opterr) { /* 1003.2 specifies the format of this message. */ fprintf(stderr, _("%s: option requires an argument -- %c\n"), argv[0], c); } optopt = c; if (optstring[0] == ':') c = ':'; else c = '?'; } else /* We already incremented `optind' once; increment it again when taking next ARGV-elt as argument. */ optarg = argv[optind++]; nextchar = NULL; } } return c; } } int getopt(argc, argv, optstring) int argc; char *const *argv; const char *optstring; { return _getopt_internal(argc, argv, optstring, (const struct option *) 0, (int *) 0, 0); } #endif /* Not ELIDE_CODE. */ #ifdef TEST /* Compile with -DTEST to make an executable for use in testing the above definition of `getopt'. */ int main(argc, argv) int argc; char **argv; { int c; int digit_optind = 0; while (1) { int this_option_optind = optind ? optind : 1; c = getopt(argc, argv, "abc:d:0123456789"); if (c == -1) break; switch (c) { case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': if (digit_optind != 0 && digit_optind != this_option_optind) printf("digits occur in two different argv-elements.\n"); digit_optind = this_option_optind; printf("option %c\n", c); break; case 'a': printf("option a\n"); break; case 'b': printf("option b\n"); break; case 'c': printf("option c with value `%s'\n", optarg); break; case '?': break; default: printf("?? getopt returned character code 0%o ??\n", c); } } if (optind < argc) { printf("non-option ARGV-elements: "); while (optind < argc) printf("%s ", argv[optind++]); printf("\n"); } exit(0); } #endif /* TEST */ abook-0.6.0pre2/getopt1.c000644 000764 000764 00000011043 10272406674 015711 0ustar00jaakkojaakko000000 000000 /* getopt_long and getopt_long_only entry points for GNU getopt. Copyright (C) 1987,88,89,90,91,92,93,94,96,97 Free Software Foundation, Inc. This file is part of the GNU C Library. Its master source is NOT part of the C library, however. The master source lives in /gd/gnu/lib. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with the GNU C Library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H #include #endif #include "getopt.h" #if !defined (__STDC__) || !__STDC__ /* This is a separate conditional since some stdc systems reject `defined (const)'. */ #ifndef const #define const #endif #endif #include /* Comment out all this code if we are using the GNU C Library, and are not actually compiling the library itself. This code is part of the GNU C Library, but also included in many other GNU distributions. Compiling and linking in this code is a waste when using the GNU C library (especially if it is a shared library). Rather than having every GNU program understand `configure --with-gnu-libc' and omit the object files, it is simpler to just do this in the source for each such file. */ #define GETOPT_INTERFACE_VERSION 2 #if !defined (_LIBC) && defined (__GLIBC__) && __GLIBC__ >= 2 #include #if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION #define ELIDE_CODE #endif #endif #ifndef ELIDE_CODE /* This needs to come after some library #include to get __GNU_LIBRARY__ defined. */ #ifdef __GNU_LIBRARY__ #include #endif #ifndef NULL #define NULL 0 #endif int getopt_long(argc, argv, options, long_options, opt_index) int argc; char *const *argv; const char *options; const struct option *long_options; int *opt_index; { return _getopt_internal(argc, argv, options, long_options, opt_index, 0); } /* Like getopt_long, but '-' as well as '--' can indicate a long option. If an option that starts with '-' (not '--') doesn't match a long option, but does match a short option, it is parsed as a short option instead. */ int getopt_long_only(argc, argv, options, long_options, opt_index) int argc; char *const *argv; const char *options; const struct option *long_options; int *opt_index; { return _getopt_internal(argc, argv, options, long_options, opt_index, 1); } #endif /* Not ELIDE_CODE. */ #ifdef TEST #include int main(argc, argv) int argc; char **argv; { int c; int digit_optind = 0; while (1) { int this_option_optind = optind ? optind : 1; int option_index = 0; static struct option long_options[] = { {"add", 1, 0, 0}, {"append", 0, 0, 0}, {"delete", 1, 0, 0}, {"verbose", 0, 0, 0}, {"create", 0, 0, 0}, {"file", 1, 0, 0}, {0, 0, 0, 0} }; c = getopt_long(argc, argv, "abc:d:0123456789", long_options, &option_index); if (c == -1) break; switch (c) { case 0: printf("option %s", long_options[option_index].name); if (optarg) printf(" with arg %s", optarg); printf("\n"); break; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': if (digit_optind != 0 && digit_optind != this_option_optind) printf("digits occur in two different argv-elements.\n"); digit_optind = this_option_optind; printf("option %c\n", c); break; case 'a': printf("option a\n"); break; case 'b': printf("option b\n"); break; case 'c': printf("option c with value `%s'\n", optarg); break; case 'd': printf("option d with value `%s'\n", optarg); break; case '?': break; default: printf("?? getopt returned character code 0%o ??\n", c); } } if (optind < argc) { printf("non-option ARGV-elements: "); while (optind < argc) printf("%s ", argv[optind++]); printf("\n"); } exit(0); } #endif /* TEST */ abook-0.6.0pre2/gettext.c000644 000764 000764 00000000373 10416412062 016002 0ustar00jaakkojaakko000000 000000 #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include "gettext.h" const char * sgettext(const char *msgid) { const char *msgval = gettext(msgid); if(msgval == msgid) msgval = strrchr(msgid, '|') + 1; return msgval; } abook-0.6.0pre2/ldif.c000644 000764 000764 00000017374 10272346247 015260 0ustar00jaakkojaakko000000 000000 /* * $Id: ldif.c,v 1.5 2005/07/29 06:28:55 jheinonen Exp $ * adapted to use with abook by JH */ /* * * Copyright (c) 1992-1996 Regents of the University of Michigan. * All rights reserved. * * Redistribution and use in source and binary forms are permitted * provided that this notice is preserved and that due credit is given * to the University of Michigan at Ann Arbor. The name of the University * may not be used to endorse or promote products derived from this * software without specific prior written permission. This software * is provided ``as is'' without express or implied warranty. * */ #include #include #include #include #include #include #include "ldif.h" #define ISSPACE(c) isspace((unsigned char)c) #define LDAP_DEBUG_PARSE 0x800 #define LDAP_DEBUG_ANY 0xffff #define LDIF_LINE_WIDTH 76 /* maximum length of LDIF lines */ #define LDIF_BASE64_LEN(vlen) (((vlen) * 4 / 3 ) + 3) #define LDIF_SIZE_NEEDED(tlen,vlen) \ ((tlen) + 4 + LDIF_BASE64_LEN(vlen) \ + ((LDIF_BASE64_LEN(vlen) + tlen + 3) / LDIF_LINE_WIDTH * 2 )) #define Debug( level, fmt, arg1, arg2, arg3 ) #define RIGHT2 0x03 #define RIGHT4 0x0f #define CONTINUED_LINE_MARKER '\001' static char nib2b64[0x40f] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; static unsigned char b642nib[0x80] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3e, 0xff, 0xff, 0xff, 0x3f, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31, 0x32, 0x33, 0xff, 0xff, 0xff, 0xff, 0xff }; /* * str_parse_line - takes a line of the form "type:[:] value" and splits it * into components "type" and "value". if a double colon separates type from * value, then value is encoded in base 64, and parse_line un-decodes it * (in place) before returning. */ int str_parse_line(char *line, char **type, char **value, int *vlen) { char *p, *s, *d, *byte, *stop; char nib; int i, b64; /* skip any leading space */ while(ISSPACE(*line)) { line++; } *type = line; for(s = line; *s && *s != ':'; s++); /* NULL */ if(*s == '\0') { Debug(LDAP_DEBUG_PARSE, "parse_line missing ':'\n", 0, 0, 0); return (-1); } /* trim any space between type and : */ for(p = s - 1; p > line && ISSPACE(*p); p--) { *p = '\0'; } *s++ = '\0'; /* check for double : - indicates base 64 encoded value */ if(*s == ':') { s++; b64 = 1; /* single : - normally encoded value */ } else { b64 = 0; } /* skip space between : and value */ while(ISSPACE(*s)) { s++; } /* if no value is present, error out */ if(*s == '\0') { Debug(LDAP_DEBUG_PARSE, "parse_line missing value\n", 0, 0, 0); return (-1); } /* check for continued line markers that should be deleted */ for(p = s, d = s; *p; p++) { if(*p != CONTINUED_LINE_MARKER) *d++ = *p; } *d = '\0'; *value = s; if(b64) { stop = strchr(s, '\0'); byte = s; for(p = s, *vlen = 0; p < stop; p += 4, *vlen += 3) { for(i = 0; i < 3; i++) { if(p[i] != '=' && (p[i] & 0x80 || b642nib[p[i] & 0x7f] > 0x3f)) { Debug(LDAP_DEBUG_ANY, "invalid base 64 encoding char (%c) 0x%x\n", p[i], p[i], 0); return (-1); } } /* first digit */ nib = b642nib[p[0] & 0x7f]; byte[0] = nib << 2; /* second digit */ nib = b642nib[p[1] & 0x7f]; byte[0] |= nib >> 4; byte[1] = (nib & RIGHT4) << 4; /* third digit */ if(p[2] == '=') { *vlen += 1; break; } nib = b642nib[p[2] & 0x7f]; byte[1] |= nib >> 2; byte[2] = (nib & RIGHT2) << 6; /* fourth digit */ if(p[3] == '=') { *vlen += 2; break; } nib = b642nib[p[3] & 0x7f]; byte[2] |= nib; byte += 3; } s[*vlen] = '\0'; } else { *vlen = (int) (d - s); } return (0); } #if 0 /* * str_getline - return the next "line" (minus newline) of input from a * string buffer of lines separated by newlines, terminated by \n\n * or \0. this routine handles continued lines, bundling them into * a single big line before returning. if a line begins with a white * space character, it is a continuation of the previous line. the white * space character (nb: only one char), and preceeding newline are changed * into CONTINUED_LINE_MARKER chars, to be deleted later by the * str_parse_line() routine above. * * it takes a pointer to a pointer to the buffer on the first call, * which it updates and must be supplied on subsequent calls. */ char * str_getline(char **next) { char *l; char c; if(*next == NULL || **next == '\n' || **next == '\0') { return (NULL); } l = *next; while((*next = strchr(*next, '\n')) != NULL) { c = *(*next + 1); if(ISSPACE(c) && c != '\n') { **next = CONTINUED_LINE_MARKER; *(*next + 1) = CONTINUED_LINE_MARKER; } else { *(*next)++ = '\0'; break; } (*next)++; } return (l); } #endif void put_type_and_value(char **out, char *t, char *val, int vlen) { unsigned char *byte, *p, *stop; unsigned char buf[3]; unsigned long bits; char *save; int i, b64, pad, len, savelen; len = 0; /* put the type + ": " */ for(p = (unsigned char *) t; *p; p++, len++) { *(*out)++ = *p; } *(*out)++ = ':'; len++; save = *out; savelen = len; *(*out)++ = ' '; b64 = 0; stop = (unsigned char *) (val + vlen); if(isascii(val[0]) && (ISSPACE(val[0]) || val[0] == ':')) { b64 = 1; } else { for(byte = (unsigned char *) val; byte < stop; byte++, len++) { if(!isascii(*byte) || !isprint(*byte)) { b64 = 1; break; } if(len > LDIF_LINE_WIDTH) { *(*out)++ = '\n'; *(*out)++ = ' '; len = 1; } *(*out)++ = *byte; } } if(b64) { *out = save; *(*out)++ = ':'; *(*out)++ = ' '; len = savelen + 2; /* convert to base 64 (3 bytes => 4 base 64 digits) */ for(byte = (unsigned char *) val; byte < stop - 2; byte += 3) { bits = (byte[0] & 0xff) << 16; bits |= (byte[1] & 0xff) << 8; bits |= (byte[2] & 0xff); for(i = 0; i < 4; i++, len++, bits <<= 6) { if(len > LDIF_LINE_WIDTH) { *(*out)++ = '\n'; *(*out)++ = ' '; len = 1; } /* get b64 digit from high order 6 bits */ *(*out)++ = nib2b64[(bits & 0xfc0000L) >> 18]; } } /* add padding if necessary */ if(byte < stop) { for(i = 0; byte + i < stop; i++) { buf[i] = byte[i]; } for(pad = 0; i < 3; i++, pad++) { buf[i] = '\0'; } byte = buf; bits = (byte[0] & 0xff) << 16; bits |= (byte[1] & 0xff) << 8; bits |= (byte[2] & 0xff); for(i = 0; i < 4; i++, len++, bits <<= 6) { if(len > LDIF_LINE_WIDTH) { *(*out)++ = '\n'; *(*out)++ = ' '; len = 1; } /* get b64 digit from low order 6 bits */ *(*out)++ = nib2b64[(bits & 0xfc0000L) >> 18]; } for(; pad > 0; pad--) { *(*out - pad) = '='; } } } *(*out)++ = '\n'; } char * ldif_type_and_value(char *type, char *val, int vlen) /* * return malloc'd, zero-terminated LDIF line */ { char *buf, *p; int tlen; size_t bufsize, t; tlen = strlen(type); t = LDIF_SIZE_NEEDED(tlen, vlen); if((bufsize = t + 1) <= t) return NULL; if((buf = malloc(bufsize)) == NULL) { return NULL; } p = buf; put_type_and_value(&p, type, val, vlen); *p = '\0'; return (buf); } abook-0.6.0pre2/list.c000644 000764 000764 00000020576 10477231617 015314 0ustar00jaakkojaakko000000 000000 /* * $Id: list.c,v 1.33 2006/09/05 08:21:35 jheinonen Exp $ * * by JH * * Copyright (C) Jaakko Heinonen */ #include #include #include "abook.h" #include #include "ui.h" #include "database.h" #include "edit.h" #include "gettext.h" #include "list.h" #include "misc.h" #include "options.h" #include "xmalloc.h" int curitem = -1; int first_list_item = -1; char *selected = NULL; extern abook_field_list *fields_list; struct index_elem *index_elements = NULL; static WINDOW *list = NULL; static void index_elem_add(int type, char *a, char *b) { struct index_elem *tmp = NULL, *cur, *cur2; int field, len = 0; if(!a || !*a) return; switch(type) { case INDEX_TEXT: tmp = xmalloc(sizeof(struct index_elem)); tmp->d.text = xstrdup(a); break; case INDEX_FIELD: /* fall through */ case INDEX_ALT_FIELD: find_field_number(a, &field); if(field == -1) return; len = (b && *b && is_number(b)) ? atoi(b) : 0; tmp = xmalloc(sizeof(struct index_elem)); tmp->d.field.id = field; tmp->d.field.len = len; break; default: assert(0); } tmp->type = type; tmp->next = NULL; tmp->d.field.next = NULL; if(!index_elements) { /* first element */ index_elements = tmp; return; } for(cur = index_elements; cur->next; cur = cur->next) ; if(type != INDEX_ALT_FIELD) cur->next = tmp; else { /* add as an alternate field */ tmp->d.field.len = cur->d.field.len; for(cur2 = cur; cur2->d.field.next; cur2 = cur2->d.field.next) ; cur2->d.field.next = tmp; } } static void parse_index_format(char *s) { char *p, *start, *lstart = NULL; int in_field = 0, in_alternate = 0, in_length = 0, type; p = start = s; while(*p) { if(*p == '{' && !in_field) { *p = 0; index_elem_add(INDEX_TEXT, start, NULL); start = ++p; in_field = 1; } else if(*p == ':' && in_field && !in_alternate) { *p = 0; lstart = ++p; in_length = 1; } else if(*p == '|' && in_field) { *p = 0; type = in_alternate ? INDEX_ALT_FIELD : INDEX_FIELD; index_elem_add(type, start, in_length ? lstart : NULL); start = ++p; in_length = 0; in_alternate = 1; } else if(*p == '}' && in_field) { *p = 0; type = in_alternate ? INDEX_ALT_FIELD : INDEX_FIELD; index_elem_add(type, start, in_length ? lstart : NULL); start = ++p; in_field = in_alternate = in_length = 0; } else p++; } if(!in_field) index_elem_add(INDEX_TEXT, start, NULL); } void init_index() { assert(!index_elements); parse_index_format(opt_get_str(STR_INDEX_FORMAT)); } void init_list() { list = newwin(LIST_LINES, LIST_COLS, LIST_TOP, 0); scrollok(list, TRUE); } void close_list() { delwin(list); list = NULL; } void get_list_field(int item, struct index_elem *e, struct list_field *res) { char *s; res->data = s = NULL; do { /* find first non-empty field data in the alternate fields list */ s = db_fget_byid(item, e->d.field.id); } while(!(s && *s) && ((e = e->d.field.next) != NULL)); if(!e || !s || !*s) return; res->data = s; get_field_info(e->d.field.id, NULL, NULL, &res->type); } static void print_list_field(int item, int line, int *x_pos, struct index_elem *e) { char *s, *p; int width, x_start, mustfree = FALSE, len = abs(e->d.field.len); struct list_field f; get_list_field(item, e, &f); s = f.data; if(!s || !*s) { *x_pos += len; return; } if(f.type == FIELD_EMAILS && !opt_get_bool(BOOL_SHOW_ALL_EMAILS)) if((p = strchr(s, ',')) != NULL) { s = xstrndup(s, p - s); mustfree = TRUE; } width = len ? bytes2width(s, len) : strwidth(s); x_start = *x_pos + ((e->d.field.len < 0) ? len - width : 0); if(width + x_start >= COLS) width = COLS - x_start; if(width) mvwaddnstr(list, line, x_start, s, width); if(mustfree) free(s); *x_pos += len ? len : width; } static void highlight_line(WINDOW *win, int line) { wstandout(win); /* * this is a tricky one */ #if 0 /*#ifdef mvwchgat*/ mvwchgat(win, line, 0, -1, A_STANDOUT, 0, NULL); #else /* * buggy function: FIXME */ scrollok(win, FALSE); { int i; wmove(win, line, 0); for(i = 0; i < COLS; i++) waddch(win, ' '); /*wattrset(win, 0);*/ } scrollok(win, TRUE); #endif } static void print_list_line(int item, int line, int highlight) { struct index_elem *cur; int x_pos = 1; scrollok(list, FALSE); if(highlight) highlight_line(list, line); if(selected[item]) mvwaddch(list, line, 0, '*' ); for(cur = index_elements; cur; cur = cur->next) switch(cur->type) { case INDEX_TEXT: mvwaddstr(list, line, x_pos, cur->d.text); x_pos += strwidth(cur->d.text); break; case INDEX_FIELD: print_list_field(item, line, &x_pos, cur); break; default: assert(0); } scrollok(list, TRUE); if(highlight) wstandend(list); } void refresh_list() { int i, line; werase(list); ui_print_number_of_items(); if(list_is_empty()) { refresh(); wrefresh(list); return; } if(curitem < 0) curitem = 0; if(first_list_item < 0) first_list_item = 0; if(curitem < first_list_item) first_list_item = curitem; else if(curitem > LAST_LIST_ITEM) first_list_item = max(curitem - LIST_LINES + 1, 0); for(line = 0, i = first_list_item; i <= LAST_LIST_ITEM && i < db_n_items(); line++, i++) { print_list_line(i, line, i == curitem); } if(opt_get_bool(BOOL_SHOW_CURSOR)) { wmove(list, curitem - first_list_item, 0); /* need to call refresh() to update the cursor positions */ refresh(); } wrefresh(list); } void list_headerline() { struct index_elem *e; int x_pos = 1, width; char *str = NULL; #if defined(A_BOLD) && defined(A_NORMAL) attrset(A_BOLD); #endif for(e = index_elements; e; e = e->next) if(e->type == INDEX_TEXT) x_pos += strwidth(e->d.text); else if(e->type == INDEX_FIELD) { get_field_info(e->d.field.id, NULL, &str, NULL); width = e->d.field.len ? abs(e->d.field.len) : strwidth(str); mvaddnstr(2, x_pos, str, width); x_pos += width; } else assert(0); #if defined(A_BOLD) && defined(A_NORMAL) attrset(A_NORMAL); #endif } void scroll_up() { if(curitem < 1) return; curitem--; refresh_list(); } void scroll_down() { if(curitem > db_n_items() - 2) return; curitem++; refresh_list(); } void page_up() { if(curitem < 1) return; curitem = curitem == first_list_item ? ((curitem -= LIST_LINES) < 0 ? 0 : curitem) : first_list_item; refresh_list(); } void page_down() { if(curitem > db_n_items() - 2) return; if(curitem == LAST_LIST_ITEM) { if((curitem += LIST_LINES) > last_item()) curitem = last_item(); } else { curitem = min(LAST_LIST_ITEM, last_item()); } refresh_list(); } void select_none() { memset(selected, 0, db_n_items()); } void select_all() { memset(selected, 1, db_n_items()); } void list_set_selection(int item, int value) { assert(is_valid_item(item)); selected[item] = !!value; } void list_invert_curitem_selection() { assert(is_valid_item(curitem)); selected[curitem] = !selected[curitem]; } void move_curitem(int direction) { list_item tmp; if(curitem < 0 || curitem > last_item()) return; tmp = item_create(); item_copy(tmp, db_item_get(curitem)); switch(direction) { case MOVE_ITEM_UP: if( curitem < 1 ) goto out_move; item_copy(db_item_get(curitem), db_item_get(curitem - 1)); item_copy(db_item_get(curitem-1), tmp); scroll_up(); break; case MOVE_ITEM_DOWN: if(curitem >= last_item()) goto out_move; item_copy(db_item_get(curitem), db_item_get(curitem + 1)); item_copy(db_item_get(curitem + 1), tmp); scroll_down(); break; } out_move: item_free(&tmp); } void goto_home() { if(db_n_items() > 0) curitem = 0; refresh_list(); } void goto_end() { if(db_n_items() > 0) curitem = last_item(); refresh_list(); } int selected_items() { int i, n = 0; for(i = 0; i < db_n_items(); i++) if(selected[i]) n++; return n; } void invert_selection() { int i; if(list_is_empty()) return; for(i = 0; i < db_n_items(); i++) selected[i] = !selected[i]; } int list_is_empty() { return db_n_items() < 1; } int list_get_curitem() { return curitem; } void list_set_curitem(int i) { curitem = i; } int duplicate_item() { list_item item; if(curitem < 0) return 1; item = item_create(); item_duplicate(item, db_item_get(curitem)); if(add_item2database(item)) { item_free(&item); return 1; } item_free(&item); curitem = last_item(); refresh_list(); return 0; } abook-0.6.0pre2/mbswidth.c000644 000764 000764 00000021100 10310503417 016124 0ustar00jaakkojaakko000000 000000 /* Determine the number of screen columns needed for a string. Copyright (C) 2000-2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Written by Bruno Haible . */ /* * Adapted for abook by JH */ #ifdef HAVE_CONFIG_H # include #endif /* Specification. */ #include "mbswidth.h" #ifdef HANDLE_MULTIBYTE /* for abook */ /* Get MB_CUR_MAX. */ #include #include /* Get isprint(). */ #include /* Get mbstate_t, mbrtowc(), mbsinit(), wcwidth(). */ #if HAVE_WCHAR_H # include #endif /* Get iswprint(), iswcntrl(). */ #if HAVE_WCTYPE_H # include #endif #if !defined iswprint && !HAVE_ISWPRINT # define iswprint(wc) 1 #endif #if !defined iswcntrl && !HAVE_ISWCNTRL # define iswcntrl(wc) 0 #endif #ifndef mbsinit # if !HAVE_MBSINIT # define mbsinit(ps) 1 # endif #endif #ifndef HAVE_DECL_WCWIDTH # warn "this configure-time declaration test was not run" #endif #if !HAVE_DECL_WCWIDTH int wcwidth (); #endif #ifndef wcwidth # if !HAVE_WCWIDTH /* wcwidth doesn't exist, so assume all printable characters have width 1. */ # define wcwidth(wc) ((wc) == 0 ? 0 : iswprint (wc) ? 1 : -1) # endif #endif /* Get ISPRINT. */ #if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII)) # define IN_CTYPE_DOMAIN(c) 1 #else # define IN_CTYPE_DOMAIN(c) isascii(c) #endif /* Undefine to protect against the definition in wctype.h of solaris2.6. */ #undef ISPRINT #define ISPRINT(c) (IN_CTYPE_DOMAIN (c) && isprint (c)) #undef ISCNTRL #define ISCNTRL(c) (IN_CTYPE_DOMAIN (c) && iscntrl (c)) /* Returns the number of columns needed to represent the multibyte character string pointed to by STRING. If a non-printable character occurs, and MBSW_REJECT_UNPRINTABLE is specified, -1 is returned. With flags = MBSW_REJECT_INVALID | MBSW_REJECT_UNPRINTABLE, this is the multibyte analogon of the wcswidth function. */ int mbswidth (const char *string, int flags) { return mbsnwidth (string, strlen (string), flags); } /* Returns the number of columns needed to represent the multibyte character string pointed to by STRING of length NBYTES. If a non-printable character occurs, and MBSW_REJECT_UNPRINTABLE is specified, -1 is returned. */ int mbsnwidth (const char *string, size_t nbytes, int flags) { const char *p = string; const char *plimit = p + nbytes; int width; width = 0; #if HAVE_MBRTOWC if (MB_CUR_MAX > 1) { while (p < plimit) switch (*p) { case ' ': case '!': case '"': case '#': case '%': case '&': case '\'': case '(': case ')': case '*': case '+': case ',': case '-': case '.': case '/': case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': case ':': case ';': case '<': case '=': case '>': case '?': case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': case 'G': case 'H': case 'I': case 'J': case 'K': case 'L': case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R': case 'S': case 'T': case 'U': case 'V': case 'W': case 'X': case 'Y': case 'Z': case '[': case '\\': case ']': case '^': case '_': case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': case 'g': case 'h': case 'i': case 'j': case 'k': case 'l': case 'm': case 'n': case 'o': case 'p': case 'q': case 'r': case 's': case 't': case 'u': case 'v': case 'w': case 'x': case 'y': case 'z': case '{': case '|': case '}': case '~': /* These characters are printable ASCII characters. */ p++; width++; break; default: /* If we have a multibyte sequence, scan it up to its end. */ { mbstate_t mbstate; memset (&mbstate, 0, sizeof mbstate); do { wchar_t wc; size_t bytes; int w; bytes = mbrtowc (&wc, p, plimit - p, &mbstate); if (bytes == (size_t) -1) /* An invalid multibyte sequence was encountered. */ { if (!(flags & MBSW_REJECT_INVALID)) { p++; width++; break; } else return -1; } if (bytes == (size_t) -2) /* An incomplete multibyte character at the end. */ { if (!(flags & MBSW_REJECT_INVALID)) { p = plimit; width++; break; } else return -1; } if (bytes == 0) /* A null wide character was encountered. */ bytes = 1; w = wcwidth (wc); if (w >= 0) /* A printable multibyte character. */ width += w; else /* An unprintable multibyte character. */ if (!(flags & MBSW_REJECT_UNPRINTABLE)) width += (iswcntrl (wc) ? 0 : 1); else return -1; p += bytes; } while (! mbsinit (&mbstate)); } break; } return width; } #endif while (p < plimit) { unsigned char c = (unsigned char) *p++; if (ISPRINT (c)) width++; else if (!(flags & MBSW_REJECT_UNPRINTABLE)) width += (ISCNTRL (c) ? 0 : 1); else return -1; } return width; } int mbsnbytes (const char *string, size_t nbytes, int maxwidth, int flags) { const char *p = string, *old_p = string; const char *plimit = p + nbytes; int width; width = 0; #if HAVE_MBRTOWC if (MB_CUR_MAX > 1) { while (p < plimit && width < maxwidth) { old_p = p; switch (*p) { case ' ': case '!': case '"': case '#': case '%': case '&': case '\'': case '(': case ')': case '*': case '+': case ',': case '-': case '.': case '/': case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': case ':': case ';': case '<': case '=': case '>': case '?': case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': case 'G': case 'H': case 'I': case 'J': case 'K': case 'L': case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R': case 'S': case 'T': case 'U': case 'V': case 'W': case 'X': case 'Y': case 'Z': case '[': case '\\': case ']': case '^': case '_': case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': case 'g': case 'h': case 'i': case 'j': case 'k': case 'l': case 'm': case 'n': case 'o': case 'p': case 'q': case 'r': case 's': case 't': case 'u': case 'v': case 'w': case 'x': case 'y': case 'z': case '{': case '|': case '}': case '~': /* These characters are printable ASCII characters. */ p++; width++; break; default: /* If we have a multibyte sequence, scan it up to its end. */ { mbstate_t mbstate; memset (&mbstate, 0, sizeof mbstate); do { wchar_t wc; size_t bytes; int w; bytes = mbrtowc (&wc, p, plimit - p, &mbstate); if (bytes == (size_t) -1) /* An invalid multibyte sequence was encountered. */ { if (!(flags & MBSW_REJECT_INVALID)) { p++; width++; break; } else return -1; } if (bytes == (size_t) -2) /* An incomplete multibyte character at the end. */ { if (!(flags & MBSW_REJECT_INVALID)) { p = plimit; width++; break; } else return -1; } if (bytes == 0) /* A null wide character was encountered. */ bytes = 1; w = wcwidth (wc); if (w >= 0) /* A printable multibyte character. */ width += w; else /* An unprintable multibyte character. */ if (!(flags & MBSW_REJECT_UNPRINTABLE)) width += (iswcntrl (wc) ? 0 : 1); else return -1; p += bytes; } while (! mbsinit (&mbstate)); } break; } } return (width > maxwidth) ? (old_p - string) : (p - string); } #endif return maxwidth; } #else /* HANDLE_MULTIBYTE */ #include int mbswidth (const char *string, int flags) { return strlen(string); } #endif /* HANDLE_MULTIBYTE */ abook-0.6.0pre2/misc.c000644 000764 000764 00000064205 10477076542 015275 0ustar00jaakkojaakko000000 000000 /* * $Id: misc.c,v 1.23 2006/09/04 18:29:25 cduval Exp $ * * by JH * * Copyright (C) Jaakko Heinonen * getaline() Copyright (C) Lars Wirzenius * sprintf and snprintf copyright is owned by various people */ #include #include #include #include #include #include #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include "abook.h" #include "misc.h" #include "xmalloc.h" #ifndef DEBUG # define NDEBUG 1 #else # undef NDEBUG #endif #include char * strlower(char *str) { char *tmp = str; assert(str != NULL); while( ( *str = tolower ( *str ) ) ) str++; return tmp; } char * strtrim(char *s) { char *t, *tt; assert(s != NULL); for(t = s; isspace(*t); t++); memmove(s, t, strlen(t)+1); for (tt = t = s; *t != '\0'; t++) if(!isspace(*t)) tt = t+1; *tt = '\0'; return s; } int is_number(char *p) { if(!p || !*p || (*p == '-' && !*++p)) return 0; for(; *p; p++) if(!isdigit(*p)) return 0; return 1; } #ifdef HAVE_CONFIG_H # include "config.h" #endif /* varargs declarations: */ #ifdef HAVE_STDARG_H # define MY_VA_LOCAL_DECL va_list ap # define MY_VA_START(f) va_start(ap, f) # define MY_VA_SHIFT(v,t) v = va_arg(ap, t) # define MY_VA_END va_end(ap) #else # error HAVE_STDARG_H not defined #endif char * strdup_printf (const char *format, ... ) { MY_VA_LOCAL_DECL; size_t size = 100; char *buffer = xmalloc (size); assert(format != NULL); for(;;) { int n; MY_VA_START(format); n = vsnprintf (buffer, size, format, ap); MY_VA_END; if (n > -1 && n < size) return buffer; if (n > -1) size = n + 1; else size *= 2; buffer = xrealloc(buffer, size); } } char* strconcat (const char *str, ...) { unsigned long l; MY_VA_LOCAL_DECL; char *s, *concat; assert(str != NULL); l = 1 + strlen (str); MY_VA_START(str); MY_VA_SHIFT(s, char*); while (s) { l += strlen (s); MY_VA_SHIFT(s, char*); } MY_VA_END; concat = xmalloc(l); strcpy (concat, str); MY_VA_START(str); MY_VA_SHIFT(s, char*); while (s) { strcat (concat, s); MY_VA_SHIFT(s, char*); } MY_VA_END; return concat; } int safe_strcmp(const char *s1, const char *s2) { if (s1 == NULL && s2 == NULL) return 0; if (s1 == NULL) return -1; if (s2 == NULL) return 1; return strcmp(s1, s2); } int safe_strcoll(const char *s1, const char *s2) { #ifdef HAVE_STRCOLL if (s1 == NULL && s2 == NULL) return 0; if (s1 == NULL) return -1; if (s2 == NULL) return 1; return strcoll(s1, s2); #else /* fall back to strcmp */ return safe_strcmp(s1, s2); #endif } char * my_getcwd() { char *dir = NULL; size_t size = 100; if( (dir = xmalloc(size)) == NULL) return NULL; *dir = 0; while( getcwd(dir, size) == NULL && errno == ERANGE ) if( (dir = xrealloc(dir, size *=2)) == NULL) return NULL; return dir; } /* * getaline() * * Copyright (c) 1994 Lars Wirzenius * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer * in this position and unchanged. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ char * getaline(FILE *f) { char *buf; /* buffer for line */ size_t size; /* size of buffer */ size_t inc; /* how much to enlarge buffer */ size_t len; /* # of chars stored into buf before '\0' */ char *p; const size_t thres = 128; /* initial buffer size (most lines should fit into this size, so think of this as the "long line threshold"). */ const size_t mucho = 128; /* if there is at least this much wasted space when the whole buffer has been read, try to reclaim it. Don't make this too small, else there is too much time wasted trying to reclaim a couple of bytes. */ const size_t mininc = 64; /* minimum number of bytes by which to increase the allocated memory */ len = 0; size = thres; buf = xmalloc(size); while (fgets(buf+len, size-len, f) != NULL) { len += strlen(buf+len); if (len > 0 && buf[len-1] == '\n') break; /* the whole line has been read */ for (inc = size, p = NULL; inc > mininc; inc /= 2) if ((p = xrealloc_inc(buf, size, inc)) != NULL) break; size += inc; buf = p; } if (len == 0) { xfree(buf); return NULL; /* nothing read (eof or error) */ } if (buf[len-1] == '\n') /* remove newline, if there */ buf[--len] = '\0'; if (size - len > mucho) { /* a plenitude of unused memory? */ p = xrealloc_inc(buf, len, 1); if (p != NULL) { buf = p; size = len+1; } } return buf; } int strwidth(const char *s) { assert(s); return mbswidth(s, 0); } int bytes2width(const char *s, int width) { assert(s); #ifdef HANDLE_MULTIBYTE return mbsnbytes(s, strlen(s), width, 0); #else return width; #endif } /************************************************************** * Original: * Patrick Powell Tue Apr 11 09:48:21 PDT 1995 * A bombproof version of doprnt (dopr) included. * Sigh. This sort of thing is always nasty do deal with. Note that * the version here does not include floating point... * * snprintf() is used instead of sprintf() as it does limit checks * for string length. This covers a nasty loophole. * * The other functions are there to prevent NULL pointers from * causing nast effects. * * More Recently: * Brandon Long 9/15/96 for mutt 0.43 * This was ugly. It is still ugly. I opted out of floating point * numbers, but the formatter understands just about everything * from the normal C string format, at least as far as I can tell from * the Solaris 2.5 printf(3S) man page. * * Brandon Long 10/22/97 for mutt 0.87.1 * Ok, added some minimal floating point support, which means this * probably requires libm on most operating systems. Don't yet * support the exponent (e,E) and sigfig (g,G). Also, fmtint() * was pretty badly broken, it just wasn't being exercised in ways * which showed it, so that's been fixed. Also, formated the code * to mutt conventions, and removed dead code left over from the * original. Also, there is now a builtin-test, just compile with: * gcc -DTEST_SNPRINTF -o snprintf snprintf.c -lm * and run snprintf for results. * * Thomas Roessler 01/27/98 for mutt 0.89i * The PGP code was using unsigned hexadecimal formats. * Unfortunately, unsigned formats simply didn't work. * * Michael Elkins 03/05/98 for mutt 0.90.8 * The original code assumed that both snprintf() and vsnprintf() were * missing. Some systems only have snprintf() but not vsnprintf(), so * the code is now broken down under HAVE_SNPRINTF and HAVE_VSNPRINTF. * **************************************************************/ #include "config.h" #if !defined(HAVE_SNPRINTF) || !defined(HAVE_VSNPRINTF) #include # include #include /* Define this as a fall through, HAVE_STDARG_H is probably already set */ #if !defined(HAVE_STDARG_H) && !defined(HAVE_VARARGS_H) # define HAVE_VARARGS_H 1 #endif /* varargs declarations: */ #if defined(HAVE_STDARG_H) /*# include */ # define HAVE_STDARGS /* let's hope that works everywhere (mj) */ # define VA_LOCAL_DECL va_list ap # define VA_START(f) va_start(ap, f) # define VA_SHIFT(v,t) ; /* no-op for ANSI */ # define VA_END va_end(ap) #else # if defined(HAVE_VARARGS_H) # include # undef HAVE_STDARGS # define VA_LOCAL_DECL va_list ap # define VA_START(f) va_start(ap) /* f is ignored! */ # define VA_SHIFT(v,t) v = va_arg(ap,t) # define VA_END va_end(ap) # else /*XX ** NO VARARGS ** XX*/ # endif #endif /*int snprintf (char *str, size_t count, const char *fmt, ...);*/ /*int vsnprintf (char *str, size_t count, const char *fmt, va_list arg);*/ static void dopr (char *buffer, size_t maxlen, const char *format, va_list args); static void fmtstr (char *buffer, size_t *currlen, size_t maxlen, char *value, int flags, int min, int max); static void fmtint (char *buffer, size_t *currlen, size_t maxlen, long value, int base, int min, int max, int flags); static void fmtfp (char *buffer, size_t *currlen, size_t maxlen, long double fvalue, int min, int max, int flags); static void dopr_outch (char *buffer, size_t *currlen, size_t maxlen, char c ); /* * dopr(): poor man's version of doprintf */ /* format read states */ #define DP_S_DEFAULT 0 #define DP_S_FLAGS 1 #define DP_S_MIN 2 #define DP_S_DOT 3 #define DP_S_MAX 4 #define DP_S_MOD 5 #define DP_S_CONV 6 #define DP_S_DONE 7 /* format flags - Bits */ #define DP_F_MINUS (1 << 0) #define DP_F_PLUS (1 << 1) #define DP_F_SPACE (1 << 2) #define DP_F_NUM (1 << 3) #define DP_F_ZERO (1 << 4) #define DP_F_UP (1 << 5) #define DP_F_UNSIGNED (1 << 6) /* Conversion Flags */ #define DP_C_SHORT 1 #define DP_C_LONG 2 #define DP_C_LDOUBLE 3 #define char_to_int(p) (p - '0') #define MAX(p,q) ((p >= q) ? p : q) static void dopr (char *buffer, size_t maxlen, const char *format, va_list args) { char ch; long value; long double fvalue; char *strvalue; int min; int max; int state; int flags; int cflags; size_t currlen; state = DP_S_DEFAULT; currlen = flags = cflags = min = 0; max = -1; ch = *format++; while (state != DP_S_DONE) { if ((ch == '\0') || (currlen >= maxlen)) state = DP_S_DONE; switch(state) { case DP_S_DEFAULT: if (ch == '%') state = DP_S_FLAGS; else dopr_outch (buffer, &currlen, maxlen, ch); ch = *format++; break; case DP_S_FLAGS: switch (ch) { case '-': flags |= DP_F_MINUS; ch = *format++; break; case '+': flags |= DP_F_PLUS; ch = *format++; break; case ' ': flags |= DP_F_SPACE; ch = *format++; break; case '#': flags |= DP_F_NUM; ch = *format++; break; case '0': flags |= DP_F_ZERO; ch = *format++; break; default: state = DP_S_MIN; break; } break; case DP_S_MIN: if (isdigit((unsigned char)ch)) { min = 10*min + char_to_int (ch); ch = *format++; } else if (ch == '*') { min = va_arg (args, int); ch = *format++; state = DP_S_DOT; } else state = DP_S_DOT; break; case DP_S_DOT: if (ch == '.') { state = DP_S_MAX; ch = *format++; } else state = DP_S_MOD; break; case DP_S_MAX: if (isdigit((unsigned char)ch)) { if (max < 0) max = 0; max = 10*max + char_to_int (ch); ch = *format++; } else if (ch == '*') { max = va_arg (args, int); ch = *format++; state = DP_S_MOD; } else state = DP_S_MOD; break; case DP_S_MOD: /* Currently, we don't support Long Long, bummer */ switch (ch) { case 'h': cflags = DP_C_SHORT; ch = *format++; break; case 'l': cflags = DP_C_LONG; ch = *format++; break; case 'L': cflags = DP_C_LDOUBLE; ch = *format++; break; default: break; } state = DP_S_CONV; break; case DP_S_CONV: switch (ch) { case 'd': case 'i': if (cflags == DP_C_SHORT) value = va_arg (args, short int); else if (cflags == DP_C_LONG) value = va_arg (args, long int); else value = va_arg (args, int); fmtint (buffer, &currlen, maxlen, value, 10, min, max, flags); break; case 'o': flags |= DP_F_UNSIGNED; if (cflags == DP_C_SHORT) value = va_arg (args, unsigned short int); else if (cflags == DP_C_LONG) value = va_arg (args, unsigned long int); else value = va_arg (args, unsigned int); fmtint (buffer, &currlen, maxlen, value, 8, min, max, flags); break; case 'u': flags |= DP_F_UNSIGNED; if (cflags == DP_C_SHORT) value = va_arg (args, unsigned short int); else if (cflags == DP_C_LONG) value = va_arg (args, unsigned long int); else value = va_arg (args, unsigned int); fmtint (buffer, &currlen, maxlen, value, 10, min, max, flags); break; case 'X': flags |= DP_F_UP; case 'x': flags |= DP_F_UNSIGNED; if (cflags == DP_C_SHORT) value = va_arg (args, unsigned short int); else if (cflags == DP_C_LONG) value = va_arg (args, unsigned long int); else value = va_arg (args, unsigned int); fmtint (buffer, &currlen, maxlen, value, 16, min, max, flags); break; case 'f': if (cflags == DP_C_LDOUBLE) fvalue = va_arg (args, long double); else fvalue = va_arg (args, double); /* um, floating point? */ fmtfp (buffer, &currlen, maxlen, fvalue, min, max, flags); break; case 'E': flags |= DP_F_UP; case 'e': if (cflags == DP_C_LDOUBLE) fvalue = va_arg (args, long double); else fvalue = va_arg (args, double); break; case 'G': flags |= DP_F_UP; case 'g': if (cflags == DP_C_LDOUBLE) fvalue = va_arg (args, long double); else fvalue = va_arg (args, double); break; case 'c': dopr_outch (buffer, &currlen, maxlen, va_arg (args, int)); break; case 's': strvalue = va_arg (args, char *); if (max < 0) max = maxlen; /* ie, no max */ fmtstr (buffer, &currlen, maxlen, strvalue, flags, min, max); break; case 'p': strvalue = va_arg (args, void *); fmtint (buffer, &currlen, maxlen, (long) strvalue, 16, min, max, flags); break; case 'n': if (cflags == DP_C_SHORT) { short int *num; num = va_arg (args, short int *); *num = currlen; } else if (cflags == DP_C_LONG) { long int *num; num = va_arg (args, long int *); *num = currlen; } else { int *num; num = va_arg (args, int *); *num = currlen; } break; case '%': dopr_outch (buffer, &currlen, maxlen, ch); break; case 'w': /* not supported yet, treat as next char */ ch = *format++; break; default: /* Unknown, skip */ break; } ch = *format++; state = DP_S_DEFAULT; flags = cflags = min = 0; max = -1; break; case DP_S_DONE: break; default: /* hmm? */ break; /* some picky compilers need this */ } } if (currlen < maxlen - 1) buffer[currlen] = '\0'; else buffer[maxlen - 1] = '\0'; } static void fmtstr (char *buffer, size_t *currlen, size_t maxlen, char *value, int flags, int min, int max) { int padlen, strln; /* amount to pad */ int cnt = 0; if (value == 0) { value = ""; } for (strln = 0; value[strln]; ++strln); /* strlen */ padlen = min - strln; if (padlen < 0) padlen = 0; if (flags & DP_F_MINUS) padlen = -padlen; /* Left Justify */ while ((padlen > 0) && (cnt < max)) { dopr_outch (buffer, currlen, maxlen, ' '); --padlen; ++cnt; } while (*value && (cnt < max)) { dopr_outch (buffer, currlen, maxlen, *value++); ++cnt; } while ((padlen < 0) && (cnt < max)) { dopr_outch (buffer, currlen, maxlen, ' '); ++padlen; ++cnt; } } /* Have to handle DP_F_NUM (ie 0x and 0 alternates) */ static void fmtint (char *buffer, size_t *currlen, size_t maxlen, long value, int base, int min, int max, int flags) { int signvalue = 0; unsigned long uvalue; char convert[20]; int place = 0; int spadlen = 0; /* amount to space pad */ int zpadlen = 0; /* amount to zero pad */ int caps = 0; if (max < 0) max = 0; uvalue = value; if(!(flags & DP_F_UNSIGNED)) { if( value < 0 ) { signvalue = '-'; uvalue = -value; } else if (flags & DP_F_PLUS) /* Do a sign (+/i) */ signvalue = '+'; else if (flags & DP_F_SPACE) signvalue = ' '; } if (flags & DP_F_UP) caps = 1; /* Should characters be upper case? */ do { convert[place++] = (caps? "0123456789ABCDEF":"0123456789abcdef") [uvalue % (unsigned)base ]; uvalue = (uvalue / (unsigned)base ); } while(uvalue && (place < 20)); if (place == 20) place--; convert[place] = 0; zpadlen = max - place; spadlen = min - MAX (max, place) - (signvalue ? 1 : 0); if (zpadlen < 0) zpadlen = 0; if (spadlen < 0) spadlen = 0; if (flags & DP_F_ZERO) { zpadlen = MAX(zpadlen, spadlen); spadlen = 0; } if (flags & DP_F_MINUS) spadlen = -spadlen; /* Left Justifty */ #ifdef DEBUG_SNPRINTF dprint (1, (debugfile, "zpad: %d, spad: %d, min: %d, max: %d, place: %d\n", zpadlen, spadlen, min, max, place)); #endif /* Spaces */ while (spadlen > 0) { dopr_outch (buffer, currlen, maxlen, ' '); --spadlen; } /* Sign */ if (signvalue) dopr_outch (buffer, currlen, maxlen, signvalue); /* Zeros */ if (zpadlen > 0) { while (zpadlen > 0) { dopr_outch (buffer, currlen, maxlen, '0'); --zpadlen; } } /* Digits */ while (place > 0) dopr_outch (buffer, currlen, maxlen, convert[--place]); /* Left Justified spaces */ while (spadlen < 0) { dopr_outch (buffer, currlen, maxlen, ' '); ++spadlen; } } static long double abs_val (long double value) { long double result = value; if (value < 0) result = -value; return result; } static long double pow10 (int exp) { long double result = 1; while (exp) { result *= 10; exp--; } return result; } static long round (long double value) { long intpart; intpart = value; value = value - intpart; if (value >= 0.5) intpart++; return intpart; } static void fmtfp (char *buffer, size_t *currlen, size_t maxlen, long double fvalue, int min, int max, int flags) { int signvalue = 0; long double ufvalue; char iconvert[20]; char fconvert[20]; int iplace = 0; int fplace = 0; int padlen = 0; /* amount to pad */ int zpadlen = 0; int caps = 0; long intpart; long fracpart; /* * AIX manpage says the default is 0, but Solaris says the default * is 6, and sprintf on AIX defaults to 6 */ if (max < 0) max = 6; ufvalue = abs_val (fvalue); if (fvalue < 0) signvalue = '-'; else if (flags & DP_F_PLUS) /* Do a sign (+/i) */ signvalue = '+'; else if (flags & DP_F_SPACE) signvalue = ' '; #if 0 if (flags & DP_F_UP) caps = 1; /* Should characters be upper case? */ #endif intpart = ufvalue; /* * Sorry, we only support 9 digits past the decimal because of our * conversion method */ if (max > 9) max = 9; /* We "cheat" by converting the fractional part to integer by * multiplying by a factor of 10 */ fracpart = round ((pow10 (max)) * (ufvalue - intpart)); if (fracpart >= pow10 (max)) { intpart++; fracpart -= pow10 (max); } #ifdef DEBUG_SNPRINTF dprint (1, (debugfile, "fmtfp: %f =? %d.%d\n", fvalue, intpart, fracpart)); #endif /* Convert integer part */ do { iconvert[iplace++] = (caps? "0123456789ABCDEF":"0123456789abcdef")[intpart % 10]; intpart = (intpart / 10); } while(intpart && (iplace < 20)); if (iplace == 20) iplace--; iconvert[iplace] = 0; /* Convert fractional part */ do { fconvert[fplace++] = (caps? "0123456789ABCDEF":"0123456789abcdef")[fracpart % 10]; fracpart = (fracpart / 10); } while(fracpart && (fplace < 20)); if (fplace == 20) fplace--; fconvert[fplace] = 0; /* -1 for decimal point, another -1 if we are printing a sign */ padlen = min - iplace - max - 1 - ((signvalue) ? 1 : 0); zpadlen = max - fplace; if (zpadlen < 0) zpadlen = 0; if (padlen < 0) padlen = 0; if (flags & DP_F_MINUS) padlen = -padlen; /* Left Justifty */ if ((flags & DP_F_ZERO) && (padlen > 0)) { if (signvalue) { dopr_outch (buffer, currlen, maxlen, signvalue); --padlen; signvalue = 0; } while (padlen > 0) { dopr_outch (buffer, currlen, maxlen, '0'); --padlen; } } while (padlen > 0) { dopr_outch (buffer, currlen, maxlen, ' '); --padlen; } if (signvalue) dopr_outch (buffer, currlen, maxlen, signvalue); while (iplace > 0) dopr_outch (buffer, currlen, maxlen, iconvert[--iplace]); /* * Decimal point. This should probably use locale to find the correct * char to print out. */ dopr_outch (buffer, currlen, maxlen, '.'); while (fplace > 0) dopr_outch (buffer, currlen, maxlen, fconvert[--fplace]); while (zpadlen > 0) { dopr_outch (buffer, currlen, maxlen, '0'); --zpadlen; } while (padlen < 0) { dopr_outch (buffer, currlen, maxlen, ' '); ++padlen; } } static void dopr_outch (char *buffer, size_t *currlen, size_t maxlen, char c) { if (*currlen < maxlen) buffer[(*currlen)++] = c; } #endif /* !defined(HAVE_SNPRINTF) || !defined(HAVE_VSNPRINTF) */ #ifndef HAVE_VSNPRINTF int vsnprintf (char *str, size_t count, const char *fmt, va_list args) { str[0] = 0; dopr(str, count, fmt, args); return(strlen(str)); } #endif /* !HAVE_VSNPRINTF */ #ifndef HAVE_SNPRINTF /* VARARGS3 */ #ifdef HAVE_STDARGS int snprintf (char *str,size_t count,const char *fmt,...) #else int snprintf (va_alist) va_dcl #endif { #ifndef HAVE_STDARGS char *str; size_t count; char *fmt; #endif VA_LOCAL_DECL; VA_START (fmt); VA_SHIFT (str, char *); VA_SHIFT (count, size_t ); VA_SHIFT (fmt, char *); (void) vsnprintf(str, count, fmt, ap); VA_END; return(strlen(str)); } #ifdef TEST_SNPRINTF #ifndef LONG_STRING #define LONG_STRING 1024 #endif int main (void) { char buf1[LONG_STRING]; char buf2[LONG_STRING]; char *fp_fmt[] = { "%-1.5f", "%1.5f", "%123.9f", "%10.5f", "% 10.5f", "%+22.9f", "%+4.9f", "%01.3f", "%4f", "%3.1f", "%3.2f", NULL }; double fp_nums[] = { -1.5, 134.21, 91340.2, 341.1234, 0203.9, 0.96, 0.996, 0.9996, 1.996, 4.136, 0}; char *int_fmt[] = { "%-1.5d", "%1.5d", "%123.9d", "%5.5d", "%10.5d", "% 10.5d", "%+22.33d", "%01.3d", "%4d", NULL }; long int_nums[] = { -1, 134, 91340, 341, 0203, 0}; int x, y; int fail = 0; int num = 0; printf ("Testing snprintf format codes against system sprintf...\n"); for (x = 0; fp_fmt[x] != NULL ; x++) for (y = 0; fp_nums[y] != 0 ; y++) { snprintf (buf1, sizeof (buf1), fp_fmt[x], fp_nums[y]); sprintf (buf2, fp_fmt[x], fp_nums[y]); if (strcmp (buf1, buf2)) { printf("snprintf doesn't match Format: %s\n\tsnprintf = %s\n\tsprintf = %s\n", fp_fmt[x], buf1, buf2); fail++; } num++; } for (x = 0; int_fmt[x] != NULL ; x++) for (y = 0; int_nums[y] != 0 ; y++) { snprintf (buf1, sizeof (buf1), int_fmt[x], int_nums[y]); sprintf (buf2, int_fmt[x], int_nums[y]); if (strcmp (buf1, buf2)) { printf("snprintf doesn't match Format: %s\n\tsnprintf = %s\n\tsprintf = %s\n", int_fmt[x], buf1, buf2); fail++; } num++; } printf ("%d tests failed out of %d.\n", fail, num); } #endif /* SNPRINTF_TEST */ #endif /* !HAVE_SNPRINTF */ /* * List handling functions */ void abook_list_append(abook_list **list, char *str) { abook_list *tmp; if(!str) return; for(tmp = *list; tmp && tmp->next; tmp = tmp->next) ; if(tmp) { tmp->next = xmalloc(sizeof(abook_list)); tmp = tmp->next; } else tmp = *list = xmalloc(sizeof(abook_list)); tmp->data = xstrdup(str); tmp->next = NULL; } void abook_list_free(abook_list **list) { abook_list *prev = NULL, *tmp = *list; if(!list) return; while(tmp) { xfree(tmp->data); prev = tmp; tmp = tmp->next; xfree(prev); } *list = NULL; } abook_list * csv_to_abook_list(char *str) { char *start, *p = str, *end; abook_list *list = NULL; if(!str) return NULL; SKIPWS(p); start = end = p; while(*p) { if(!strchr(", ", *p)) { end = ++p; continue; } if((*p == ',') && (end - start)) { abook_list_append(&list, xstrndup(start, end - start)); p++; SKIPWS(p); start = end = p; continue; } p++; } if(end - start) abook_list_append(&list, xstrndup(start, end - start)); return list; } char * abook_list_to_csv(abook_list *list) { abook_list *tmp; char *res = NULL; for(tmp = list; tmp; tmp = tmp->next) { if(tmp == list) res = xstrdup(tmp->data); else { res = xrealloc(res, strlen(res)+strlen(tmp->data)+2); strcat(res, ","); strcat(res, tmp->data); } } return res; } void abook_list_rotate(abook_list **list, enum rotate_dir dir) { abook_list *tmp = *list; if(!tmp || !tmp->next) return; switch(dir) { case ROTATE_LEFT: for(; tmp && tmp->next; tmp = tmp->next) ; tmp->next = *list; tmp = *list; *list = (*list)->next; tmp->next = NULL; break; case ROTATE_RIGHT: for(; tmp && tmp->next && tmp->next->next; tmp = tmp->next) ; tmp->next->next = *list; *list = tmp->next; tmp->next = NULL; break; default: assert(0); } } /* if str == NULL, deleting the list element */ void abook_list_replace(abook_list **list, int index, char *str) { abook_list *cur, *prev; int i = 0; cur = prev = *list; if((index == 0) && !str) { *list = cur->next; free(cur->data); free(cur); return; } while(1) { if(!cur) return; if(i == index) break; prev = cur; cur = cur->next; i++; } if(str) { free(cur->data); cur->data = xstrdup(str); } else { prev->next = cur->next; free(cur->data); free(cur); } } abook_list * abook_list_get(abook_list *list, int index) { int i = 0; while(1) { if(!list) return NULL; if(i == index) return list; i++; list = list->next; } } abook-0.6.0pre2/options.c000644 000764 000764 00000022377 10477505541 016035 0ustar00jaakkojaakko000000 000000 /* * $Id: options.c,v 1.33 2006/09/06 08:48:33 jheinonen Exp $ * * by JH * * Copyright (C) Jaakko Heinonen * */ #include #include #include #include #include #include "options.h" #include "abook.h" #include "gettext.h" #include "misc.h" #include "views.h" #include "xmalloc.h" #ifndef FALSE # define FALSE 0 #endif #ifndef TRUE # define TRUE 1 #endif #define UL (unsigned long) /* * option types */ enum opt_type { OT_BOOL, OT_STR, OT_INT }; struct option { char *option; enum opt_type type; unsigned int data; unsigned long init; }; static struct option abook_vars[] = { { "autosave", OT_BOOL, BOOL_AUTOSAVE, TRUE }, { "show_all_emails", OT_BOOL, BOOL_SHOW_ALL_EMAILS, TRUE }, { "index_format", OT_STR, STR_INDEX_FORMAT, UL " {name:22} {email:40} {phone:12|workphone|mobile}" }, { "mutt_command", OT_STR, STR_MUTT_COMMAND, UL "mutt" }, { "mutt_return_all_emails", OT_BOOL, BOOL_MUTT_RETURN_ALL_EMAILS, TRUE }, { "print_command", OT_STR, STR_PRINT_COMMAND, UL "lpr" }, { "www_command", OT_STR, STR_WWW_COMMAND, UL "lynx" }, { "address_style", OT_STR, STR_ADDRESS_STYLE, UL "eu" }, { "use_ascii_only", OT_BOOL, BOOL_USE_ASCII_ONLY, FALSE }, { "add_email_prevent_duplicates", OT_BOOL, BOOL_ADD_EMAIL_PREVENT_DUPLICATES, FALSE }, { "preserve_fields", OT_STR, STR_PRESERVE_FIELDS, UL "standard" }, { "sort_field", OT_STR, STR_SORT_FIELD, UL "nick" }, { "show_cursor", OT_BOOL, BOOL_SHOW_CURSOR, FALSE }, { NULL } }; static unsigned char bool_opts[BOOL_MAX]; static int int_opts[INT_MAXIMUM]; static char *str_opts[STR_MAX]; static void set_int(enum int_opts opt, int value) { assert(opt >= 0 && opt < INT_MAXIMUM); int_opts[opt] = value; } static void set_bool(enum bool_opts opt, bool value) { assert(opt >= 0 && opt < BOOL_MAX); bool_opts[opt] = value; } static void set_str(enum str_opts opt, char *value) { assert(opt >= 0 && opt < STR_MAX); if(str_opts[opt]) free(str_opts[opt]); str_opts[opt] = xstrdup(value); } int opt_get_int(enum int_opts opt) { assert(opt >= 0 && opt < INT_MAXIMUM); return int_opts[opt]; } bool opt_get_bool(enum bool_opts opt) { assert(opt >= 0 && opt < BOOL_MAX); return bool_opts[opt]; } char * opt_get_str(enum str_opts opt) { assert(opt >= 0 && opt < STR_MAX); return str_opts[opt]; } static void restore_default(struct option *p) { switch(p -> type) { case OT_BOOL: set_bool(p -> data, (bool)p -> init); break; case OT_INT: set_int(p -> data, (int)p -> init); break; case OT_STR: if(p -> init) set_str(p -> data, (char *) p -> init); break; default: assert(0); } } void init_opts() { int i; for(i = 0; abook_vars[i].option; i++) restore_default(&abook_vars[i]); } void free_opts() { int i; /* * only strings need to be freed */ for(i = 0; i < STR_MAX; i++) { free(str_opts[i]); str_opts[i] = NULL; } } /* * file parsing */ typedef struct { char *data, *ptr; } buffer; static void opt_line_remove_comments(char *p) { bool in_quote = FALSE; bool escape = FALSE; assert(p != NULL); for(; *p; p++) { switch(*p) { case '\"': if(!escape) in_quote = !in_quote; break; case '\\': escape = TRUE; break; case '#': if(!in_quote) { *p = 0; return; } default: escape = FALSE; } } } /* After calling, * - b->data points to the found token, or NULL is end of parsing * - b->ptr points to the begining of next token * * If the TOKEN_ALLOC option is used, the original string is not mangled * and memory is allocated for the token. */ static char * get_token(buffer *b, int options) { char quote = 0, c; char *end = NULL; assert(b); SKIPWS(b->ptr); if(*b->ptr && strchr("\"'", *b->ptr)) quote = *(b->ptr++); b->data = b->ptr; while(1) { if(!(c = *b->ptr)) { end = b->ptr; break; } if(!quote && ( ISSPACE(c) || ((options & TOKEN_EQUAL) && (c == '=')) || ((options & TOKEN_COMMA) && (c == ','))) ) { end = b->ptr; break; } else if(c == quote) { quote = 0; end = b->ptr++; break; } b->ptr++; } if(quote) return _("quote mismatch"); if(options & (TOKEN_EQUAL | TOKEN_COMMA)) SKIPWS(b->ptr); /* whitespaces can precede the sign */ if((options & TOKEN_EQUAL) && (*b->ptr != '=')) return _("no assignment character found"); if((options & TOKEN_COMMA) && *b->ptr && (*b->ptr != ',')) return _("error in comma separated list"); if(b->ptr == b->data) { b->data = NULL; return NULL; /* no error, just end of parsing */ } if(options & TOKEN_ALLOC) /* freeing is the caller's responsibility */ b->data = xstrndup(b->data, end - b->data); else *end = 0; b->ptr++; /* advance to next token */ SKIPWS(b->ptr); return NULL; } static const char * opt_set_set_option(char *p, struct option *opt) { int len; assert(p); strtrim(p); len = strlen(p); if(*p == '\"' && p[len - 1] == '\"') { if(len < 3) return _("invalid value"); p[len - 1] = 0; p++; } switch(opt -> type) { case OT_STR: set_str(opt -> data, p); break; case OT_INT: set_int(opt -> data, safe_atoi(p)); break; case OT_BOOL: if(!strcasecmp(p, "true") || !strcasecmp(p, "on")) set_bool(opt -> data, TRUE); else if(!strcasecmp(p, "false") || !strcasecmp(p, "off")) set_bool(opt -> data, FALSE); else return _("invalid value"); break; default: assert(0); } return NULL; } static const char * opt_set_option(char *var, char *p) { int i; assert(var); assert(p); for(i = 0; abook_vars[i].option; i++) if(!strcmp(abook_vars[i].option, var)) return opt_set_set_option(p, &abook_vars[i]); return _("unknown option"); } static int check_options() { char *str; int err = 0; str = opt_get_str(STR_PRESERVE_FIELDS); if(strcasecmp(str, "all") && strcasecmp(str, "none") && strcasecmp(str, "standard")) { fprintf(stderr, _("valid values for the 'preserve_fields' " "option are 'all', 'standard' " "(default), and 'none'\n")); restore_default(&abook_vars[STR_PRESERVE_FIELDS]); err++; } str = opt_get_str(STR_ADDRESS_STYLE); if(strcasecmp(str, "eu") && strcasecmp(str, "uk") && strcasecmp(str, "us")) { fprintf(stderr, _("valid values for the 'address_style' " "option are 'eu' (default), 'uk', " "and 'us'\n")); restore_default(&abook_vars[STR_ADDRESS_STYLE]); err++; } return err; } /* * syntax: set