debian/0000755000000000000000000000000012263076111007165 5ustar debian/README.Debian-source0000644000000000000000000000205412263076111012525 0ustar Commands for the `biber' Debian package ======================================= 1. Remove a Git tag that was already committed ---------------------------------------------- Example: git push origin :debian/0.9.9+git2012426-1 This will remove the tag "debian/0.9.9+git2012426-1". 2. Build the package from source -------------------------------- debian/gbp.conf already contains some configuration settings. One only needs to run "git-buildpackage" to make it work. Example: git-buildpackage 3. Update the upstream source ----------------------------- I think I have to run the command "gbp-pull" to get it to work. You cannot have uncommitted changes in your source tree. Example: gbp-pull The upstream branch will only be updated with every public release; it is not connected to the development branch that is updated very frequently. 4. Update tags To update tags, use: git tag -a -s -m "Tagging release ABC" ABC Then upload it: git push --tags -- Danai SAE-HAN (韓達耐) , Tue, 1 May 2012 11:09:54 +0200 debian/copyright0000644000000000000000000002272212263076111011125 0ustar Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: biber Upstream-Contact: Philip Kime Source: http://biblatex-biber.sourceforge.net/ Files: * Copyright: François Charette , Philip Kime License: GPL-1+ or Artistic-2.0 Files: debian/* Copyright: 2012, Danai SAE-HAN (韓達耐) License: GPL-1+ License: Artistic-2.0 Copyright (c) 2000-2006, The Perl Foundation. . Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. . Preamble . This license establishes the terms under which a given free software Package may be copied, modified, distributed, and/or redistributed. The intent is that the Copyright Holder maintains some artistic control over the development of that Package while still keeping the Package available as open source and free software. . You are always permitted to make arrangements wholly outside of this license directly with the Copyright Holder of a given Package. If the terms of this license do not permit the full use that you propose to make of the Package, you should contact the Copyright Holder and seek a different licensing arrangement. . Definitions . "Copyright Holder" means the individual(s) or organization(s) named in the copyright notice for the entire Package. . "Contributor" means any party that has contributed code or other material to the Package, in accordance with the Copyright Holder's procedures. . "You" and "your" means any person who would like to copy, distribute, or modify the Package. . "Package" means the collection of files distributed by the Copyright Holder, and derivatives of that collection and/or of those files. A given Package may consist of either the Standard Version, or a Modified Version. . "Distribute" means providing a copy of the Package or making it accessible to anyone else, or in the case of a company or organization, to others outside of your company or organization. . "Distributor Fee" means any fee that you charge for Distributing this Package or providing support for this Package to another party. It does not mean licensing fees. . "Standard Version" refers to the Package if it has not been modified, or has been modified only in ways explicitly requested by the Copyright Holder. . "Modified Version" means the Package, if it has been changed, and such changes were not explicitly requested by the Copyright Holder. . "Original License" means this Artistic License as Distributed with the Standard Version of the Package, in its current version or as it may be modified by The Perl Foundation in the future. . "Source" form means the source code, documentation source, and configuration files for the Package. . "Compiled" form means the compiled bytecode, object code, binary, or any other form resulting from mechanical transformation or translation of the Source form. . Permission for Use and Modification Without Distribution . (1) You are permitted to use the Standard Version and create and use Modified Versions for any purpose without restriction, provided that you do not Distribute the Modified Version. . Permissions for Redistribution of the Standard Version . (2) You may Distribute verbatim copies of the Source form of the Standard Version of this Package in any medium without restriction, either gratis or for a Distributor Fee, provided that you duplicate all of the original copyright notices and associated disclaimers. At your discretion, such verbatim copies may or may not include a Compiled form of the Package. . (3) You may apply any bug fixes, portability changes, and other modifications made available from the Copyright Holder. The resulting Package will still be considered the Standard Version, and as such will be subject to the Original License. . Distribution of Modified Versions of the Package as Source . (4) You may Distribute your Modified Version as Source (either gratis or for a Distributor Fee, and with or without a Compiled form of the Modified Version) provided that you clearly document how it differs from the Standard Version, including, but not limited to, documenting any non-standard features, executables, or modules, and provided that you do at least ONE of the following: . (a) make the Modified Version available to the Copyright Holder of the Standard Version, under the Original License, so that the Copyright Holder may include your modifications in the Standard Version. (b) ensure that installation of your Modified Version does not prevent the user installing or running the Standard Version. In addition, the Modified Version must bear a name that is different from the name of the Standard Version. (c) allow anyone who receives a copy of the Modified Version to make the Source form of the Modified Version available to others under (i) the Original License or (ii) a license that permits the licensee to freely copy, modify and redistribute the Modified Version using the same licensing terms that apply to the copy that the licensee received, and requires that the Source form of the Modified Version, and of any works derived from it, be made freely available in that license fees are prohibited but Distributor Fees are allowed. . Distribution of Compiled Forms of the Standard Version or Modified Versions without the Source . (5) You may Distribute Compiled forms of the Standard Version without the Source, provided that you include complete instructions on how to get the Source of the Standard Version. Such instructions must be valid at the time of your distribution. If these instructions, at any time while you are carrying out such distribution, become invalid, you must provide new instructions on demand or cease further distribution. If you provide valid instructions or cease distribution within thirty days after you become aware that the instructions are invalid, then you do not forfeit any of your rights under this license. . (6) You may Distribute a Modified Version in Compiled form without the Source, provided that you comply with Section 4 with respect to the Source of the Modified Version. . Aggregating or Linking the Package . (7) You may aggregate the Package (either the Standard Version or Modified Version) with other packages and Distribute the resulting aggregation provided that you do not charge a licensing fee for the Package. Distributor Fees are permitted, and licensing fees for other components in the aggregation are permitted. The terms of this license apply to the use and Distribution of the Standard or Modified Versions as included in the aggregation. . (8) You are permitted to link Modified and Standard Versions with other works, to embed the Package in a larger work of your own, or to build stand-alone binary or bytecode versions of applications that include the Package, and Distribute the result without restriction, provided the result does not expose a direct interface to the Package. . Items That are Not Considered Part of a Modified Version . (9) Works (including, but not limited to, modules and scripts) that merely extend or make use of the Package, do not, by themselves, cause the Package to be a Modified Version. In addition, such works are not considered parts of the Package itself, and are not subject to the terms of this license. . General Provisions . (10) Any use, modification, and distribution of the Standard or Modified Versions is governed by this Artistic License. By using, modifying or distributing the Package, you accept this license. Do not use, modify, or distribute the Package, if you do not accept this license. . (11) If your Modified Version has been derived from a Modified Version made by someone other than you, you are nevertheless required to ensure that your Modified Version complies with the requirements of this license. . (12) This license does not grant you the right to use any trademark, service mark, tradename, or logo of the Copyright Holder. . (13) This license includes the non-exclusive, worldwide, free-of-charge patent license to make, have made, use, offer to sell, sell, import and otherwise transfer the Package with respect to any patent claims licensable by the Copyright Holder that are necessarily infringed by the Package. If you institute patent litigation (including a cross-claim or counterclaim) against any party alleging that the Package constitutes direct or contributory patent infringement, then this Artistic License to you shall terminate on the date that such litigation is filed. . (14) Disclaimer of Warranty: THE PACKAGE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS IS' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED TO THE EXTENT PERMITTED BY YOUR LOCAL LAW. UNLESS REQUIRED BY LAW, NO COPYRIGHT HOLDER OR CONTRIBUTOR WILL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. License: GPL-1+ This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. . On Debian systems, the complete text of version 1 of the GNU General Public License can be found in `/usr/share/common-licenses/GPL-1'. debian/patches/0000755000000000000000000000000012263076111010614 5ustar debian/patches/fix-xpathcontext0000644000000000000000000000136612263076111014062 0ustar fix a strange failure during testing where a call to registerNs gives an error about cannot *unregister*. Thanks to Don Armstrong for providing the idea --- lib/Biber/Input/file/biblatexml.pm | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- biber.orig/lib/Biber/Input/file/biblatexml.pm +++ biber/lib/Biber/Input/file/biblatexml.pm @@ -156,7 +156,8 @@ $xml = NFD(decode('UTF-8', $xml));# Unicode NFD boundary my $bltxml = $parser->parse_string($xml); my $xpc = XML::LibXML::XPathContext->new($bltxml); - $xpc->registerNs($NS, $BIBLATEXML_NAMESPACE_URI); + my $tmp = $BIBLATEXML_NAMESPACE_URI; + $xpc->registerNs($NS, $tmp); if ($section->is_allkeys) { $logger->debug("All citekeys will be used for section '$secnum'"); debian/patches/series0000644000000000000000000000013112263076111012024 0ustar 01_remove_dependency_mozilla_ca.patch 02_spelling.patch 03_whatis.patch fix-xpathcontext debian/patches/03_whatis.patch0000644000000000000000000000414412263076111013441 0ustar Description: add (dummy) whatis entries to POD Origin: vendor Forwarded: no Author: gregor herrmann Last-Update: 2013-08-29 --- lib/Biber/DataModel.pm | 2 +- lib/Biber/Entries.pm | 2 +- lib/Biber/Entry.pm | 2 +- lib/Biber/Entry/Name.pm | 2 +- lib/Biber/Entry/Names.pm | 2 +- lib/Biber/Section.pm | 2 +- lib/Biber/Sections.pm | 2 +- lib/Biber/SortList.pm | 2 +- lib/Biber/SortLists.pm | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) --- biber.orig/lib/Biber/Entries.pm +++ biber/lib/Biber/Entries.pm @@ -7,7 +7,7 @@ =head1 NAME -Biber::Entries +Biber::Entries - Biber::Entries objects =head2 new --- biber.orig/lib/Biber/Entry.pm +++ biber/lib/Biber/Entry.pm @@ -18,7 +18,7 @@ =head1 NAME -Biber::Entry +Biber::Entry - Biber::Entry objects =head2 new --- biber.orig/lib/Biber/Entry/Name.pm +++ biber/lib/Biber/Entry/Name.pm @@ -15,7 +15,7 @@ =head1 NAME -Biber::Entry::Name +Biber::Entry::Name - Biber::Entry::Name objects =head2 new --- biber.orig/lib/Biber/Entry/Names.pm +++ biber/lib/Biber/Entry/Names.pm @@ -13,7 +13,7 @@ =head1 NAME -Biber::Entry::Names +Biber::Entry::Names - Biber::Entry::Names objects =head2 new --- biber.orig/lib/Biber/Section.pm +++ biber/lib/Biber/Section.pm @@ -11,7 +11,7 @@ =head1 NAME -Biber::Section +Biber::Section - Biber::Section objects =head2 new --- biber.orig/lib/Biber/Sections.pm +++ biber/lib/Biber/Sections.pm @@ -7,7 +7,7 @@ =head1 NAME -Biber::Sections +Biber::Sections - Biber::Sections objects =head2 new --- biber.orig/lib/Biber/SortList.pm +++ biber/lib/Biber/SortList.pm @@ -11,7 +11,7 @@ =head1 NAME -Biber::SortList +Biber::SortList - Biber::SortList objects =head2 new --- biber.orig/lib/Biber/SortLists.pm +++ biber/lib/Biber/SortLists.pm @@ -7,7 +7,7 @@ =head1 NAME -Biber::SortLists +Biber::SortLists - Biber::SortLists objects =head2 new --- biber.orig/lib/Biber/DataModel.pm +++ biber/lib/Biber/DataModel.pm @@ -14,7 +14,7 @@ =head1 NAME -Biber::DataModel +Biber::DataModel - Biber::DataModel objects =cut debian/patches/02_spelling.patch0000644000000000000000000000431012263076111013751 0ustar Description: fix spelling mistakes Origin: vendor Forwarded: no Author: gregor herrmann Last-Update: 2013-08-29 --- lib/Biber.pm | 2 +- lib/Biber/Config.pm | 4 ++-- t/basic-misc.t | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) --- biber.orig/lib/Biber/Config.pm +++ biber/lib/Biber/Config.pm @@ -1196,7 +1196,7 @@ Increment the count of an labelname/labelyear combination for extrayear - We pass in the name and year strings seperately as we have to + We pass in the name and year strings separately as we have to be careful and only increment this counter beyond 1 if there is a name component. Otherwise, extrayear gets defined for all entries with no name but the same year etc. @@ -1673,7 +1673,7 @@ setdisplaymode(['entrytype'], ['field'], ['citekey'], $value) This sets the desired displaymode to use for some data in the bib. - Of course, this is entirey seperate semantically from the + Of course, this is entirey separate semantically from the displaymodes *defined* in the bib which just tell you what to return for a particular displaymode request for some data. --- biber.orig/lib/Biber.pm +++ biber/lib/Biber.pm @@ -2586,7 +2586,7 @@ Biber::Config->add_uniquelistcount($namelist); } - # We need to know the list uniqueness counts for the whole list seperately otherwise + # We need to know the list uniqueness counts for the whole list separately otherwise # we will falsely "disambiguate" identical name lists from each other by setting # uniquelist to the full list because every part of each list will have more than # one count. We therefore need to distinguish counts which are of the final, complete --- biber.orig/t/basic-misc.t +++ biber/t/basic-misc.t @@ -376,7 +376,7 @@ is( $out->get_output_entry('murray', $main), $murray2, 'bbl with > maxcitenames, empty alphaothers' ) ; -# Make sure namehash and fullhash are seperately generated +# Make sure namehash and fullhash are separately generated is( $out->get_output_entry('anon1', $main), $anon1, 'namehash/fullhash 1' ) ; is( $out->get_output_entry('anon2', $main), $anon2, 'namehash/fullhash 2' ) ; debian/patches/01_remove_dependency_mozilla_ca.patch0000644000000000000000000001213212263076111020021 0ustar Description: remove requirement for Mozilla::CA, Debian has ca-certificates Origin: vendor Forwarded: not-needed Author: Danai SAE-HAN (韓達耐) Reviewed-by: gregor herrmann Last-Update: 2014-01-07 Comment: fixes to adapt to biber 1.8 --- lib/Biber/Input/file/biblatexml.pm | 8 ++------ lib/Biber/Input/file/bibtex.pm | 8 ++------ lib/Biber/Input/file/endnotexml.pm | 8 ++------ lib/Biber/Input/file/ris.pm | 8 ++------ lib/Biber/Input/file/zoterordfxml.pm | 8 ++------ 5 files changed, 10 insertions(+), 30 deletions(-) --- biber.orig/lib/Biber/Input/file/biblatexml.pm +++ biber/lib/Biber/Input/file/biblatexml.pm @@ -99,12 +99,8 @@ # It may, however, have been removed by some biber unpacked dists if (not exists($ENV{PERL_LWP_SSL_CA_FILE}) and not exists($ENV{PERL_LWP_SSL_CA_PATH}) and - not defined(Biber::Config->getoption('ssl-nointernalca')) and - eval {require Mozilla::CA}) { - # we assume that the default CA file is in .../Mozilla/CA/cacert.pem - (my $vol, my $dir, undef) = File::Spec->splitpath( $INC{"Mozilla/CA.pm"} ); - $dir =~ s/\/$//; # splitpath sometimes leaves a trailing '/' - $ENV{PERL_LWP_SSL_CA_FILE} = File::Spec->catpath($vol, "$dir/CA", 'cacert.pem'); + not defined(Biber::Config->getoption('ssl-nointernalca'))) { + $ENV{PERL_LWP_SSL_CA_FILE} = '/etc/ssl/certs/ca-certificates.crt'; } # fallbacks for, e.g., linux --- biber.orig/lib/Biber/Input/file/endnotexml.pm +++ biber/lib/Biber/Input/file/endnotexml.pm @@ -118,12 +118,8 @@ # It may, however, have been removed by some biber unpacked dists if (not exists($ENV{PERL_LWP_SSL_CA_FILE}) and not exists($ENV{PERL_LWP_SSL_CA_PATH}) and - not defined(Biber::Config->getoption('ssl-nointernalca')) and - eval {require Mozilla::CA}) { - # we assume that the default CA file is in .../Mozilla/CA/cacert.pem - (my $vol, my $dir, undef) = File::Spec->splitpath( $INC{"Mozilla/CA.pm"} ); - $dir =~ s/\/$//; # splitpath sometimes leaves a trailing '/' - $ENV{PERL_LWP_SSL_CA_FILE} = File::Spec->catpath($vol, "$dir/CA", 'cacert.pem'); + not defined(Biber::Config->getoption('ssl-nointernalca'))) { + $ENV{PERL_LWP_SSL_CA_FILE} = '/etc/ssl/certs/ca-certificates.crt'; } # fallbacks for, e.g., linux --- biber.orig/lib/Biber/Input/file/ris.pm +++ biber/lib/Biber/Input/file/ris.pm @@ -113,12 +113,8 @@ # It may, however, have been removed by some biber unpacked dists if (not exists($ENV{PERL_LWP_SSL_CA_FILE}) and not exists($ENV{PERL_LWP_SSL_CA_PATH}) and - not defined(Biber::Config->getoption('ssl-nointernalca')) and - eval {require Mozilla::CA}) { - # we assume that the default CA file is in .../Mozilla/CA/cacert.pem - (my $vol, my $dir, undef) = File::Spec->splitpath( $INC{"Mozilla/CA.pm"} ); - $dir =~ s/\/$//; # splitpath sometimes leaves a trailing '/' - $ENV{PERL_LWP_SSL_CA_FILE} = File::Spec->catpath($vol, "$dir/CA", 'cacert.pem'); + not defined(Biber::Config->getoption('ssl-nointernalca'))) { + $ENV{PERL_LWP_SSL_CA_FILE} = '/etc/ssl/certs/ca-certificates.crt'; } # fallbacks for, e.g., linux --- biber.orig/lib/Biber/Input/file/zoterordfxml.pm +++ biber/lib/Biber/Input/file/zoterordfxml.pm @@ -129,12 +129,8 @@ # It may, however, have been removed by some biber unpacked dists if (not exists($ENV{PERL_LWP_SSL_CA_FILE}) and not exists($ENV{PERL_LWP_SSL_CA_PATH}) and - not defined(Biber::Config->getoption('ssl-nointernalca')) and - eval {require Mozilla::CA}) { - # we assume that the default CA file is in .../Mozilla/CA/cacert.pem - (my $vol, my $dir, undef) = File::Spec->splitpath( $INC{"Mozilla/CA.pm"} ); - $dir =~ s/\/$//; # splitpath sometimes leaves a trailing '/' - $ENV{PERL_LWP_SSL_CA_FILE} = File::Spec->catpath($vol, "$dir/CA", 'cacert.pem'); + not defined(Biber::Config->getoption('ssl-nointernalca'))) { + $ENV{PERL_LWP_SSL_CA_FILE} = '/etc/ssl/certs/ca-certificates.crt'; } # fallbacks for, e.g., linux --- biber.orig/lib/Biber/Input/file/bibtex.pm +++ biber/lib/Biber/Input/file/bibtex.pm @@ -140,12 +140,8 @@ # It may, however, have been removed by some biber unpacked dists if (not exists($ENV{PERL_LWP_SSL_CA_FILE}) and not exists($ENV{PERL_LWP_SSL_CA_PATH}) and - not defined(Biber::Config->getoption('ssl-nointernalca')) and - eval {require Mozilla::CA}) { - # we assume that the default CA file is in .../Mozilla/CA/cacert.pem - (my $vol, my $dir, undef) = File::Spec->splitpath( $INC{"Mozilla/CA.pm"} ); - $dir =~ s/\/$//; # splitpath sometimes leaves a trailing '/' - $ENV{PERL_LWP_SSL_CA_FILE} = File::Spec->catpath($vol, "$dir/CA", 'cacert.pem'); + not defined(Biber::Config->getoption('ssl-nointernalca'))) { + $ENV{PERL_LWP_SSL_CA_FILE} = '/etc/ssl/certs/ca-certificates.crt'; } # fallbacks for, e.g., linux debian/changelog0000644000000000000000000000704512263076111011045 0ustar biber (1.8-1) unstable; urgency=low * install documentation for biber (biber.pdf) (Closes: #689201) * Imported Upstream version 1.8 (Closes: #734413) * update mozilla patch, drop upstream included patches * bump standards version, no changes necessary * add libtest-pod-coverage-perl to build-deps * update vcs fields to new location * new patch fix-xpathcontext - thanks to Don Armstrong -- Norbert Preining Wed, 08 Jan 2014 07:14:18 +0900 biber (1.7-2) unstable; urgency=low * replace recommends: biblatex -> texlive-bibtex-extra, biblatex* will be removed from the archive * break against biblatex (<< 2) (Closes: #722727) -- Norbert Preining Sun, 15 Sep 2013 09:32:04 +0900 biber (1.7-1) unstable; urgency=low [ gregor herrmann ] * debian/control: update {versioned,alternative} (build) dependencies. [ Xavier Guimard ] * Update debian/watch [ Danai SAE-HAN (韓達耐) ] * New upstream release 1.7: - There are a lot of changes and updates since the last Debian package (v0.9.9). I thoroughly recommend to have a look at the upstream changelog which you can find under /usr/share/doc/biber/changelog.gz - Some highlights are: + A number of options have changed names; ATM the old ones are still supported. + Works with biblatex v2.5. + A new "tool" mode which takes a data source as argument and just performs reencoding, source mappings etc. + Extra disambiguation trackers for labels and titles. + Sorting per list enabled for biblatex v2.0. * [debian/gbp.conf] Use "upstream" as the upstream branch instead of "upstream/dev". * [debian/control] + Update the dependencies. + Bump dependency to Perl 5.16+; * [debian/patches/01_remove_dependency_mozilla_ca.patch] + Refresh the patch. [ Axel Beckert ] * Fix Vcs-Browser header (Closes: #710246) [ Norbert Preining ] * rebuild the git repository * update patches to current biber * include a patch from upstream (to be in 1.8) to remove dependency on Data::Diver and switch to autovivification module, edit control * add more build-deps and (run) deps * add myself to the uploaders * add a patch taken from OpenSuSE to ensure tests succeed with perl 5.18 randomization of hash keys (thanks Werner Fink) * bump standards version to 3.9.4, no changes necessary * fix lintian warnings * switch maintainers to the Debian TeX Group -- Norbert Preining Mon, 02 Sep 2013 11:35:57 +0900 biber (0.9.9+git2012426-3) unstable; urgency=low * Team upload. * [be7b51b1] Add tons of build dependencies (closes: #676051). * [bff7c405] Don't run test that needs network access. * [013530f2] Remove unneeded version constraints from (build) dependencies. * [ca6a3c84] debian/copyright: update to Copyright-Format 1.0. * [e533f233] Add DEP3 headers to patch. * [7c5c1e4e] Add patches to fix spelling mistakes and add missing whatis entries in POD. -- gregor herrmann Tue, 05 Jun 2012 21:24:53 +0200 biber (0.9.9+git2012426-2) unstable; urgency=low * [copyright] Add the full Artistic-2 license and add Francois Charette as copyright holder. Thanks to Ansgar Burchardt. -- Danai SAE-HAN (韓達耐) Sun, 03 Jun 2012 12:04:30 +0800 Biber (0.9.9+git2012426-1) unstable; urgency=low * Initial Release. * Closing ITP bug report (Closes: #570018). -- Danai SAE-HAN (韓達耐) Tue, 01 May 2012 12:47:55 +0200 debian/biber.docs0000644000000000000000000000002012263076111011112 0ustar TODO.org README debian/gbp.conf0000644000000000000000000000027712263076111010612 0ustar [DEFAULT] pristine-tar = True [git-dch] meta = True id-length = 8 [git-import-orig] upstream-branch = upstream #upstream-branch = upstream/dev #upstream-branch = dev debian-branch = master debian/watch0000644000000000000000000000021212263076111010211 0ustar version=3 opts="dversionmangle=s/\+.*//" \ http://githubredir.debian.net/github/plk/biber/ .*/v(\d[\d.]+)\.(?:tar(?:\.gz|\.bz2)?|tgz|zip) debian/rules0000755000000000000000000000073712263076111010254 0ustar #!/usr/bin/make -f TEST_FILES=$(filter-out t/remote-files.t,$(shell echo t/*.t)) %: dh $@ --with tex override_dh_auto_test: dh_auto_test -- test_files="$(TEST_FILES)" override_dh_install: dh_install # also install the documentation and link mkdir -p debian/biber/usr/share/texmf/doc/bibtex/biber install -m 0644 doc/biber.pdf debian/biber/usr/share/texmf/doc/bibtex/biber/biber.pdf dh_link usr/share/texmf/doc/bibtex/biber/biber.pdf \ usr/share/doc/biber/biber.pdf debian/compat0000644000000000000000000000000212263076111010363 0ustar 9 debian/control0000644000000000000000000000667212263076111010603 0ustar Source: biber Maintainer: Debian TeX maintainers Uploaders: Danai SAE-HAN (韓達耐) , Norbert Preining Section: perl Priority: optional Build-Depends: debhelper (>= 9), perl (>= 5.14.0), libautovivification-perl, libconfig-autoconf-perl (>= 0.15), libdata-compare-perl, libdata-dump-perl, libdate-simple-perl, libencode-eucjpms-perl, libencode-hanextra-perl, libencode-jis2k-perl, libextutils-libbuilder-perl (>= 0.02), libfile-slurp-unicode-perl, libfile-which-perl, libipc-run3-perl, liblist-allutils-perl, liblist-moreutils-perl, liblog-log4perl-perl, liblwp-protocol-https-perl, libreadonly-perl, libreadonly-xs-perl, libregexp-common-perl, libtext-bibtex-perl (>= 0.66), libunicode-collate-perl (>= 0.98), libunicode-linebreak-perl, libwww-perl, libxml-libxml-simple-perl, libxml-libxslt-perl, libtest-pod-perl (>= 1.22), libxml-writer-perl, libbusiness-isbn-perl, libbusiness-ismn-perl, libbusiness-issn-perl, liburi-perl, libtest-pod-coverage-perl (>= 1.08), tex-common Standards-Version: 3.9.5 Vcs-Git: git://anonscm.debian.org/debian-tex/biber.git Vcs-Browser: http://anonscm.debian.org/gitweb/?p=debian-tex/biber.git Homepage: http://biblatex-biber.sourceforge.net/ Package: biber Architecture: all Depends: ${misc:Depends}, ${perl:Depends}, libautovivification-perl, libdata-compare-perl, libdata-dump-perl, libdate-simple-perl, libencode-eucjpms-perl, libencode-hanextra-perl, libencode-jis2k-perl, libfile-slurp-unicode-perl, libipc-run3-perl, liblwp-protocol-https-perl, liblist-allutils-perl, liblist-moreutils-perl, liblog-log4perl-perl, libreadonly-perl, libregexp-common-perl, libtext-bibtex-perl (>= 0.66), libunicode-collate-perl (>= 0.98), libunicode-linebreak-perl, libwww-perl, libxml-libxml-simple-perl, libxml-libxslt-perl, libxml-writer-perl, libbusiness-isbn-perl, libbusiness-ismn-perl, libbusiness-issn-perl, liburi-perl, libunicode-linebreak-perl Recommends: texlive-bibtex-extra, libreadonly-xs-perl Breaks: biblatex (<< 2) Description: Much-augmented BibTeX replacement for BibLaTeX users The biblatex package by Philipp Lehman is becoming the definitive citation management tool for LaTeX users. Biblatex has relied on the venerable BibTeX program only for sorting and generating a very generic .bbl file without any formatting instruction. Everything else is taken care of by biblatex, which provides a powerful and flexible macro interface for authors of citation styles. . Biber offers a large superset of BibTeX functionality for BibLaTeX users. In addition it offers full UTF-8 (Unicode 6.0) capabilities, fully customisable sorting, output to GraphViz to help visualise complex crossrefs, support for remote data sources, structural validation of the data against the (customisable) data model, and a lot more. debian/source/0000755000000000000000000000000012263076111010465 5ustar debian/source/format0000644000000000000000000000001412263076111011673 0ustar 3.0 (quilt)