binfmt-support-2.2.2/ 0000755 0000000 0000000 00000000000 14246242371 011462 5 0000000 0000000 binfmt-support-2.2.2/.gitignore 0000666 0000000 0000000 00000000650 14246241610 013372 0000000 0000000 **/*.a
**/*.o
**/*~
**/.deps
**/Makefile
**/Makefile.in
/INSTALL
/aclocal.m4
/autom4te.cache
/build-aux
/config.h
/config.h.in
/config.log
/config.status
/config.status.lineno
/configure
/gl
/gnulib
/stamp-h*
init/openrc/binfmt-support
init/systemd/binfmt-support.service
init/sysvinit/binfmt-support
init/upstart/binfmt-support.conf
man/update-binfmts.8
src/run-detectors
src/tests/*.log
src/tests/*.trs
src/update-binfmts
binfmt-support-2.2.2/COPYING 0000666 0000000 0000000 00000104515 14246241610 012442 0000000 0000000 GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc.
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
Copyright (C)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
Copyright (C)
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
.
binfmt-support-2.2.2/ChangeLog 0000644 0000000 0000000 00000077545 14246242371 013176 0000000 0000000 2022-06-02 Colin Watson
Version: 2.2.2
2022-06-02 Colin Watson
Revert use of ProtectHome=true from systemd service
I've noticed this sometimes failing at least in LXD containers as
follows:
Failed to set up mount namespacing: /run/systemd/unit-root/run/user: Permission denied
Failed at step NAMESPACE spawning /usr/sbin/update-binfmts: Permission denied
Since this isn't a long-running service, we can afford to forgo this
particular piece of hardening in the name of robustness.
* init/systemd/binfmt-support.service.in: Remove `ProtectHome=true`.
2022-06-02 Colin Watson
Add NEWS entry for previous commit
2022-06-02 Michael Biebl
Run binfmt-support.service after systemd-binfmt.service
This fixes a race condition during boot when both services try to access
/proc/sys/fs/binfmt_misc/register at the same time which can lead to the
following error:
systemd[1]: Starting Enable support for additional executable binary formats...
update-binfmts[536]: update-binfmts: warning: unable to close /proc/sys/fs/binfmt_misc/register: File exists
update-binfmts[536]: update-binfmts: warning: unable to close /proc/sys/fs/binfmt_misc/register: File exists
update-binfmts[536]: update-binfmts: warning: unable to close /proc/sys/fs/binfmt_misc/register: File exists
update-binfmts[536]: update-binfmts: exiting due to previous errors
systemd[1]: binfmt-support.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
systemd[1]: binfmt-support.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Enable support for additional executable binary formats.
Fixes Debian bug #1012154.
2022-04-23 Colin Watson
gitlab-ci: Run tests with VERBOSE=1
This makes it easier to diagnose test failures.
* .gitlab-ci.yml (build-distcheck:script, build-out-of-tree:script): Set
VERBOSE=1.
2022-04-23 Colin Watson
Update pre-commit hooks
* .pre-commit-config.yaml (pre-commit-hooks): Update to v4.2.0.
(black): Update to 22.3.0.
(pyupgrade): Update to v2.32.0.
2022-03-08 Colin Watson
pre-commit: Add shellcheck
* .pre-commit-config.yaml: Add shellcheck.
* .shellcheckrc: New file.
2022-03-08 Colin Watson
tests: Add a few shellcheck directives
* src/tests/detectors, src/tests/display, src/tests/enable,
src/tests/find, src/tests/import, src/tests/install: Add `shellcheck
source-path=SCRIPTDIR` directive before sourcing testlib.sh.
* src/tests/detectors: Disable SC2154; `pkglibexecdir` is always set by
the test runner.
* src/tests/testlib.sh: Tell shellcheck which shell syntax to assume,
since this file has no `#!` line.
(fake_proc): Disable SC2154; `srcdir` is always set by the test files
that include this library.
2022-03-08 Colin Watson
tests: Improve quoting
* src/tests/detectors, src/tests/display, src/tests/enable,
src/tests/find, src/tests/import, src/tests/install,
src/tests/testlib.sh: Use ': "${var=default}"' idiom to assign default
values rather than ': ${var=default}', pacifying shellcheck.
2022-03-08 Colin Watson
tests: Make pass/fail reporting more shellcheck-friendly
* src/tests/detectors, src/tests/display, src/tests/enable,
src/tests/find, src/tests/import, src/tests/install: Refactor to use
report function rather than expect_pass.
* src/tests/testlib.sh (expect_pass): Remove.
2022-03-08 Colin Watson
tests: Add an expect_files_equal helper function
* src/tests/testlib.sh (report): New function, similar to expect_pass
but taking an exit code rather than a command string to evaluate.
(expect_pass): Refactor using report function.
(expect_files_equal): New function.
* src/tests/detectors, src/tests/display, src/tests/enable,
src/tests/find, src/tests/import, src/tests/install: Use
expect_files_equal instead of the equivalent expect_pass construction.
2022-03-06 Colin Watson
Add some hardening options to the systemd service
* init/systemd/binfmt-support.service.in: Add some hardening options.
(This may produce warnings with `systemd < 244`.)
* NEWS.md: Document this.
2022-01-16 Colin Watson
Update to Gnulib 20220116
* bootstrap: Sync to Gnulib 1eae0f7ea3c220d054025f2c9211700665f9f4a0.
* bootstrap.conf (GNULIB_REVISION): Set to
1eae0f7ea3c220d054025f2c9211700665f9f4a0.
2022-01-16 Colin Watson
Update pre-commit hooks
* .pre-commit-config.yaml (pre-commit-hooks): Update to v4.1.0.
(black): Update to 21.12b0.
(pyupgrade): Update to v2.31.0.
(flake8): Update to 5.10.1.
2022-01-03 Colin Watson
Remove release.sh
GitLab CI handles building releases now.
* release.sh: Remove.
* Makefile.am (EXTRA_DIST): Remove release.sh.
2022-01-03 Colin Watson
Add release automation
When a tag is pushed to GitLab, upload the bootstrapped source tarball
to the package registry, and create a release in GitLab associated with
the tag.
* .gitlab-ci.yml (stages): Remove test, since it had no jobs. Add
upload and release.
(upload, release): New jobs.
2022-01-03 Colin Watson
Reformat release notes as Markdown
* NEWS: Move to ...
* NEWS.md: ... here. Reformat as Markdown.
2022-01-02 Colin Watson
Enable many more GCC warnings
* bootstrap.conf (gnulib_modules): Add manywarnings.
* configure.ac: Add gl_MANYWARN_ALL_GCC, with some refinements to
disable -Wsystem-headers and -Wmissing-field-initializers.
(--enable-gcc-warnings): New option, based on code in coreutils. Use
this to enable -fanalyzer only if --enable-gcc-warnings=expensive is
used; it's useful but slow.
2022-01-02 Colin Watson
Update to Gnulib 20211231
* bootstrap: Sync to Gnulib 14db2b71b5bd05b94ec6126617fd32cd5f1016cd.
* bootstrap.conf (GNULIB_REVISION): Set to
14db2b71b5bd05b94ec6126617fd32cd5f1016cd.
2022-01-02 Colin Watson
Add build-distcheck CI artifact
This should eventually allow publishing release tarballs built by a CI
process rather than on my laptop.
* .gitlab-ci.yml (variables): Set GIT_DEPTH to 0; we need full history
in order to build the ChangeLog file.
(build-distcheck:before_script): Add git, needed by gitlog-to-changelog.
(build-distcheck:artifacts): Add bootstrapped/*.tar.gz.
2021-11-28 Colin Watson
Fix pre-commit CI
* .gitlab-ci.yml (bootstrap): Install git.
2021-11-28 Colin Watson
Run pre-commit in GitLab CI
* .gitlab-ci.yml (stages): Add bootstrap.
(pre-commit): New job.
(bootstrap): Move to bootstrap stage.
2021-11-17 Colin Watson
Apply pyupgrade (no-op)
* .pre-commit-config.yaml: Add pyupgrade.
2021-11-08 Colin Watson
Ignore the "black" commit for "git blame"
Developers should apply the following config setting:
git config blame.ignoreRevsFile .git-blame-ignore-revs
* .git-blame-ignore-revs: New file.
2021-11-08 Colin Watson
Apply black code formatter for Python
* .pre-commit-config.yaml: Add black, flake8, and isort.
* .flake8: New file.
* src/tests/pyproject.toml: New file.
* src/tests/binfmt_misc.py: Reformat using black.
2021-11-08 Colin Watson
Update pre-commit-hooks
* .pre-commit-config.yaml: Update pre-commit-hooks to v4.0.1.
(trailing-whitespace): Exclude src/mp.h.
2021-11-08 Colin Watson
Reduce indentation depth using C99
* src/update-binfmts.c (parse_opt): Move declaration of "p" to the
initialization clause of its "for" statement, allowing us to remove an
enclosing block and associated indentation level.
2021-11-08 Colin Watson
Document C99 compiler requirement
The use of MPP_DECLARE in src/glcontainers.h needs this. While I've
historically tried to stick to C89, that's probably too picky: it should
be easy to find a C99 compiler for any system that can run
binfmt-support.
* README.md (Installation): Document C99 compiler requirement.
2021-11-08 Colin Watson
Inform build system about mp.h
* src/Makefile.am (COMMON): Add mp.h.
2021-11-08 Colin Watson
Remove superfluous blank line
2021-11-08 Colin Watson
Simplify interface to container iterator macros
The Gnulib container iterator macros (GL_LIST_FOREACH_* and
GL_OMAP_FOREACH_*) have to run code both before and after a chunk of
user-supplied code. This previously required a START/END macro pair
used something like this:
GL_LIST_FOREACH_START (formats, binfmt) {
...
} GL_LIST_FOREACH_END (formats);
This doesn't look natural in C, and so it was easy to get it wrong.
It's possible to do better, at the cost of some tricky macros.
Fortunately, Simon Tatham has already done the hard work in
https://www.chiark.greenend.org.uk/~sgtatham/mp/, and the necessary
header file is MIT-licensed, so we can incorporate it. Now these
iterator macros are used more like this, which is a much more natural C
style:
GL_LIST_FOREACH (formats, binfmt) {
...
}
* src/mp.h: New file.
* src/glcontainers.h (GL_LIST_FOREACH_START, GL_LIST_FOREACH_END):
Rewrite as ...
(GL_LIST_FOREACH): ... this.
(GL_OMAP_FOREACH_START, GL_OMAP_FOREACH_END): Rewrite as ...
(GL_OMAP_FOREACH): ... this.
* src/find.c (find_interpreters): Update uses of iterator macros.
* src/run-detectors.c (main): Likewise.
* src/update-binfmts.c (act_enable, act_disable, act_display, act_find):
Likewise.
2021-11-08 Colin Watson
Fix tests to work with Python 3
I attempted to do this in 505cdc5630 way back in 2012, but didn't get it
quite right.
* src/tests/binfmt_misc.py: Set #! to /usr/bin/python3, since that's
more likely to exist nowadays.
(create_entry): Return bytes.
(write): Decode buffer before trying to parse it.
* NEWS: Document this.
* .gitlab-ci.yml (build-distcheck, build-out-of-tree): Install
python3-fuse so that the tests run.
(build-out-of-tree): Run "make" before "make check".
2021-11-08 Colin Watson
Generate better git diffs for Python files
* .gitattributes: Set "diff=python" for *.py files.
2021-11-08 Colin Watson
Introduce pre-commit
* .pre-commit-config.yaml: New file.
2021-11-08 Colin Watson
Update remaining HTTP URLs to HTTPS
* COPYING: Update from current contents of
https://www.gnu.org/licenses/gpl-3.0.txt (no substantive licensing
changes, only updated URLs).
2021-11-08 Colin Watson
Upgrade to Gnulib 20211103
In line with Gnulib, we now require Autoconf 2.64.
* bootstrap: Sync to Gnulib d902ad1b7507776bd16fa48d605fb9e2109bda16.
* bootstrap.conf (GNULIB_REVISION): Set to
d902ad1b7507776bd16fa48d605fb9e2109bda16.
(buildreq): Bump required autoconf version to 2.64.
* configure.ac (AC_PREREQ): Bump to 2.64.
* NEWS: Document this.
2021-11-08 Colin Watson
NEWS: Document move to GitLab
2021-11-08 Colin Watson
Add a brief README
* README.md: New file.
2021-11-08 Colin Watson
Add .gitlab-ci.yml
2021-09-19 Colin Watson
Update some obsolete Autoconf macros
* configure.ac: Replace AC_GNU_SOURCE and AC_ISC_POSIX with
AC_USE_SYSTEM_EXTENSIONS. Replace AC_CONFIG_HEADER with
AC_CONFIG_HEADERS.
2020-04-17 Colin Watson
Version: 2.2.1
NEWS: Document changes for 2.2.1
2020-04-17 Colin Watson
Fix build with gcc -fno-common
Fixes Debian bug #957038.
* src/paths.h (admindir, importdir, procdir, auxdir): Declare as extern.
2020-01-01 Colin Watson
Ensure that standard I/O streams are open
Otherwise behaviour is undefined if somebody (unwisely) closes them
before calling us.
* bootstrap.conf (gnulib_modules): Add xstdopen.
* src/update-binfmts.c (main): Call xstdopen.
2019-12-27 Colin Watson
Replace kvhash with gl_map/gl_omap
A list was a clumsy implementation of this; a map is more appropriate.
* bootstrap.conf (gnulib_modules): Add hash-map, hash-pjw-bare,
rbtree-omap, stdbool, xmap, and xomap; remove rbtreehash-list.
* src/glcontainers.c: New file.
* src/glcontainers.h (string_equals, string_hash, plain_free,
new_string_map, new_string_omap, map_contains, omap_contains): Add
prototypes.
(GL_OMAP_FOREACH_START, GL_OMAP_FOREACH_END): New macros.
* src/format.c (binfmt_new): Take a map rather than a list.
(kvhash_dispose_binfmt): Remove.
* src/format.h (binfmt_new): Update prototype.
(kvhash_dispose_binfmt): Remove prototype.
* src/update-binfmts.c (formats): Declare as a map rather than a list.
(get_import, load_format, act_enable, act_disable, act_install,
act_remove, act_import, act_unimport, act_display, main): Update to the
map API.
(act_import, act_unimport): Free import before returning.
* src/kvhash.c, src/kvhash.h: Remove.
* src/Makefile.am (COMMON): Add glcontainers.c; remove kvhash.c and
kvhash.h.
2019-11-18 Helmut Grohne
Fix wrongly-documented "fix_binary" format entry
The manual page says:
| The magic, offset, mask, extension, detector, credentials, preserve, and
| fix-binary options correspond to the command-line options of the same
| names.
However, the code parses "fix_binary" rather than "fix-binary". Use of
"fix-binary" is silently ignored.
Fixes Debian bug #945020.
* man/update-binfmts.man8 (FORMAT FILES): Correct spelling of
"fix_binary" option.
2019-02-10 Colin Watson
Use macros for common cases of list iteration
* src/glcontainers.h: New file.
* src/Makefile.am (COMMON): Add glcontainers.h.
* src/find.c (find_interpreters): Replace manual list iteration with
equivalent macros.
* src/run-detectors.c (main): Likewise.
* src/update-binfmts.c (act_enable, act_disable, act_display): Likewise.
2019-01-24 Colin Watson
Version: 2.2.0
Update to Gnulib 20190124
2019-01-13 Colin Watson
Warn about fix-binary/detectors incompatibility
"--fix-binary yes" is incompatible with detectors. Warn the user if
they try to use both at once.
Thanks to Stefan Agner; fixes Debian bug #918901.
* src/update-binfmts.c (act_enable): Warn and return if a detector is
needed and the fix-binary flag is set.
* man/update-binfmts.man8 (BINARY FORMAT SPECIFICATIONS): Document the
incompatibility.
* NEWS: Document this.
2019-01-13 Colin Watson
Avoid cleanup problems in chroots
Don't enable formats on import or disable them on unimport unless
/proc/sys/fs/binfmt_misc is already mounted.
Fixes Debian bug #847788 and Ubuntu bug #534211.
* src/update-binfmts.c (is_enabled): New function.
(load_binfmt_misc): Use is_enabled rather than equivalent code.
(act_install): Add always_update_kernel argument. Only enable/disable
if always_update_kernel or if binfmt_misc is already enabled.
(act_remove): Add always_update_kernel argument. Only disable if
always_update_kernel or if binfmt_misc is already enabled.
(act_import, act_unimport, main): Adjust calls to act_install and
act_remove.
* NEWS: Document this.
2019-01-13 Colin Watson
Add a new --unimport action
This is the inverse of --import.
* src/update-binfmts.c (act_unimport): New function.
(enum opts, options, mode_name, parse_opt, argp, main): Handle
--unimport.
* src/tests/import: Test --unimport.
* man/update-binfmts.man8 (SYNOPSIS): Add --unimport.
(COMMON OPTIONS): Mention --unimport in description of --package.
(ACTIONS): Document --unimport.
* NEWS: Document this.
2019-01-05 Colin Watson
Upgrade to Gnulib 20190105
In line with Gnulib, we now require Autoconf 2.63.
* bootstrap: Sync to Gnulib d271f868a8df9bbec29049d01e056481b7a1a263.
* bootstrap.conf (GNULIB_REVISION): Set to
d271f868a8df9bbec29049d01e056481b7a1a263.
(buildreq): Bump required autoconf version to 2.63.
* configure.ac (AM_SILENT_RULES): Remove conditional, which was there
for Automake 1.10 support.
(AC_PREREQ): Bump to 2.63.
* NEWS: Document this.
2019-01-05 Colin Watson
Add release.sh script
* release.sh: New file.
* Makefile.am (EXTRA_DIST): Add release.sh.
2019-01-05 Colin Watson
Use tar --sort=name if available
* m4/binfmt-tar-sort-name.m4: New file.
* configure.ac: Call BINFMT_TAR_SORT_NAME.
* Makefile.am (ACLOCAL_AMFLAGS): Add -I m4.
2019-01-04 Colin Watson
Sort formats by name in --display
The easiest way to do this was to recast kvhash as a wrapper around a
gl_list_t (specifically a red-black tree hash) rather than a Hash_table.
* bootstrap.conf (gnulib_modules): Remove hash; add rbtreehash-list.
* src/kvhash.c (kvhash_hasher): Rename to ...
(kvhash_hashcode): ... this, make static, and replace the hash
implementation with one from Gnulib.
(kvhash_compare): New function.
(kvhash_comparator): Rename to ...
(kvhash_equals): ... this, make static, and reimplement using
kvhash_compare.
(kvhash_dispose, kvhash_dispose_plain): New functions.
(kvhash_initialize, kvhash_exists, kvhash_lookup, kvhash_insert,
kvhash_delete): Use a list rather than a hash.
* src/kvhash.h (kvhash_hasher, kvhash_comparator): Remove prototypes.
(kvhash_dispose, kvhash_dispose_plain): Add prototypes.
(kvhash_initialize, kvhash_exists, kvhash_lookup, kvhash_insert,
kvhash_delete): Update prototypes.
* src/format.c (binfmt_new): Take a list rather than a hash table.
(binfmt_hash_free): Rename to ...
(kvhash_dispose_binfmt): ... this, and update to the list API.
* src/format.h (binfmt_new): Update prototype.
(binfmt_hash_free): Rename to ...
(kvhash_dispose_binfmt): ... this, and update prototype.
* src/update-binfmts.c (formats): Declare as a list rather than a hash
table.
(get_import, act_enable, act_disable, act_import, act_display, main):
Update to the list API.
* NEWS: Document this.
2018-12-24 Colin Watson
More (void *) 0 as variadic sentinel
* src/find.c (find_interpreters): Use (void *) rather than NULL as a
sentinel for variadic functions.
2018-12-24 Colin Watson
Use (void *) 0 as a variadic sentinel
NULL is formally incorrect here since the standard allows it to be an
integer constant expression.
* src/update-binfmts.c (rename_mv, load_binfmt_misc,
unload_binfmt_misc): Use (void *) rather than NULL as a sentinel for
variadic functions.
2018-12-24 Colin Watson
Tidy up and document removal of procfs support
* src/update-binfmts.c (unload_binfmt_misc): Move declarations to top of
function. Remove obsolete comment.
* NEWS: Document removal of procfs support.
2018-12-24 Bastian Blank
Remove ancient unused procfs support
* src/update-binfmts.c (enum binfmt_style, get_binfmt_style): Remove.
(load_binfmt_misc, unload_binfmt_misc): Remove procfs case.
2018-05-29 Colin Watson
Avoid gl directory confusion
* bootstrap.conf (local_gl_dir): Set to 'gnulib-local'.
2018-05-28 Colin Watson
Upgrade to Gnulib 20180527
* bootstrap.conf (GNULIB_URL): Remove.
(GNULIB_REVISION): Set to 90f289f249a266b1afb9c63e182f5d979d17df5f.
(gnulib_extra_files): Remove. (This has the effect of reverting to
bootstrap's default of also copying some files in build-aux/ from
Gnulib.)
2018-05-28 Colin Watson
Switch to bootstrap
We no longer keep autogenerated files in git.
* .gitignore: Add **/Makefile, **/Makefile.in, /INSTALL, /aclocal.m4,
/build-aux, /config.h.in, /configure, /gl, and /gnulib. Remove
doc/Makefile, gnulib/*, init/Makefile, init/openrc/Makefile,
init/systemd/Makefile, init/sysvinit/Makefile, init/upstart/Makefile,
man/Makefile, src/Makefile, and src/tests/Makefile.
* INSTALL, Makefile.in, aclocal.m4, autogen.sh, build-aux, config.h.in,
configure, doc/Makefile.in, gnulib, init/Makefile.in,
init/openrc/Makefile.in, init/systemd/Makefile.in,
init/sysvinit/Makefile.in, init/upstart/Makefile.in, man/Makefile.in,
src/Makefile.in, src/tests/Makefile.in: Remove.
* bootstrap, bootstrap.conf: New files.
* Makefile.am (SUBDIRS, EXTRA_DIST, ACLOCAL_AMFLAGS): Refer to gl/
rather than gnulib/ (gnulib/ now contains pristine source).
(EXTRA_DIST): Replace autogen.sh with bootstrap and bootstrap.conf.
Remove gnulib/m4/gnulib-cache.m4 and gnulib/m4/gnulib-tool.m4.
* configure.ac (AC_CONFIG_FILES): Refer to gl/ rather than gnulib/.
* src/Makefile.am (AM_CPPFLAGS, LIBGNU): Likewise.
2017-08-22 Colin Watson
Version: 2.1.8.
2017-08-22 Colin Watson
Add --disable-{upstart,systemd} configure options
* configure.ac: Add --disable-upstart and --disable-systemd options.
* init/upstart/Makefile.am: Don't install job if --disable-upstart is
used.
* init/systemd/Makefile.am: Don't install unit if --disable-systemd is
used.
* NEWS: Document this.
2017-07-09 Colin Watson
Version: 2.1.7.
2017-07-09 Dan Nicholson
Add support for fix-binary flag
Recent kernels provide a binfmt flag F referred to as fix binary[1].
This flag instructs the kernel to open the interpreter immediately and
use always use the opened image. This has a big advantage in containers
or chroots where the interpreter may not exist at the specified path.
A primary use case would be for a static linked QEMU user emulator where
an architecture can be emulated in a container or chroot without any
alterations so long as the binfmt configuration is handled on the host.
1. https://www.kernel.org/doc/html/latest/admin-guide/binfmt-misc.html
2017-07-09 Colin Watson
Various build system upgrades
Upgrade to Automake 1.15.1, config.guess 2016-10-02, and config.sub
2016-11-04.
2016-02-21 Colin Watson
Version: 2.1.6.
2016-02-21 Colin Watson
Various build system upgrades
Upgrade to Autoconf 2.69-9 (from Debian), config.guess 2015-08-20,
config.sub 2015-08-20, and pkg-config 0.29.
2016-02-21 Colin Watson
Implement a stop action for the systemd service
* init/systemd/binfmt-support.service.in: Implement ExecStop, but
with manual dependencies so that the service doesn't need to be
(unnecessarily) stopped on shutdown. Thanks to Michael Biebl; fixes
Debian bug #739085.
* NEWS: Document this.
2016-02-21 Raphaƫl Hertzog
Always install DB entry even if /proc entry exists
* src/update-binfmts.c (act_install): Remove test for existing /proc
entry, superseded by test in act_enable. Fixes Debian bug #750245.
* NEWS: Document this.
2015-08-06 Colin Watson
Upgrade to Automake 1.15 and config.sub 2014-09-11.
2014-08-24 Colin Watson
Version: 2.1.5.
Upgrade to Gettext 0.19.2.
2014-08-19 Colin Watson
Update to config.guess 2014-03-23 and config.sub 2014-05-01.
2014-08-18 Riku Voipio
Add support for preserve-argv0 flag
Qemu will start requiring setting P in binfmt_misc
flags [P]. Unfortunately update-binfmts doesn't just
pass flags section as-is. The only supported flag
so far is credentials, which is supported via --credentials
command line flag.
I've implemented a similar --preserve flag in this commit.
This commit (or something similar) needs to land to Debian
before qemu 2.2 can be uploaded.
[P] https://www.kernel.org/doc/Documentation/binfmt_misc.txt
2014-03-30 Colin Watson
Version: 2.1.4.
Upgrade to Automake 1:1.14.1-3 (from Debian).
2014-03-30 Cameron Norman
upstart: do not act as a task
* init/upstart/binfmt-support.conf.in: Make the job a service with
pre-start and post-stop stanzas rather than a task, as a task with a
corresponding init script prevents startpar from continuing the boot
sequence past that init script (because the job is considered
"stopped").
* NEWS: Document this.
2014-03-06 Colin Watson
Fix --disable-sysvinit and --disable-openrc configure options
* configure.ac: Check whether $enable_sysvinit and $enable_openrc
are set to "yes", not merely whether they are set at all.
* NEWS: Document this.
2014-02-20 Colin Watson
Fix test suite when libexecdir is not /usr/lib
* src/tests/Makefile.am (TESTS_ENVIRONMENT): Export pkglibexecdir to
tests.
* src/tests/detectors: Expect interpreter to be set to
$pkglibexecdir/run-detectors rather than
/usr/lib/binfmt-support/run-detectors.
* NEWS: Document this.
2014-02-20 Colin Watson
* .gitignore: Add src/tests/*.log and src/tests/*.trs.
2014-02-20 Colin Watson
Move Autotools auxiliary build files from tools to build-aux.
"build-aux" is a more conventional location for the Autotools files.
2014-02-18 Colin Watson
Upgrade to Gnulib 20140202.
2014-02-08 Colin Watson
Version: 2.1.3.
* init/openrc/binfmt-support.in: Check uname in stop as well.
2014-02-08 Colin Watson
Fix reversed logic in OpenRC script
* init/openrc/binfmt-support.in (start): Fix reversed uname check.
* NEWS: Document this.
2014-02-07 Colin Watson
Version: 2.1.2.
2014-02-07 Colin Watson
Add --enable-sysvinit and --enable-openrc configure options
* configure.ac: Add --enable-sysvinit and --enable-openrc options.
Check that at most one of these is used.
* init/openrc/Makefile.am: Install script if --enable-openrc is
used.
* init/sysvinit/Makefile.am: Install script if --enable-sysvinit is
used.
* NEWS: Document this.
2014-02-07 Colin Watson
Remove unnecessary file extension
* init/sysvinit/Makefile.am (EXTRA_DIST, CLEANFILES, noinst_SCRIPTS,
binfmt-support): Remove ".sh" extension.
* init/sysvinit/binfmt-support.sh.in: Rename to ...
* init/sysvinit/binfmt-support.in: ... this.
* .gitignore: Ignore init/sysvinit/binfmt-support rather than
init/sysvinit/binfmt-support.sh.
2014-02-07 Colin Watson
Add OpenRC support
* configure.ac (AC_CONFIG_FILES): Add init/openrc/Makefile.
* init/Makefile.am (SUBDIRS): Add openrc.
* init/openrc/Makefile.am: New file.
* init/openrc/binfmt-support.in: New file.
* .gitignore: Add init/openrc/Makefile and
init/openrc/binfmt-support.
* NEWS: Document this.
2014-02-07 Colin Watson
Embed full path to update-binfmts into init files
* init/sysvinit/binfmt-support.sh: Rename to ...
* init/sysvinit/binfmt-support.sh.in: ... this, substituting
@sbindir@ and removing PATH setting.
* init/sysvinit/Makefile.am (EXTRA_DIST): Distribute
binfmt-support.sh.in.
(CLEANFILES): Clean binfmt-support.sh.
(dist_noinst_SCRIPTS): Rename to ...
(noinst_SCRIPTS): ... this.
(binfmt-support.sh): Generate from binfmt-support.sh.in.
* init/upstart/binfmt-support.conf: Rename to ...
* init/upstart/binfmt-support.conf.in: ... this, substituting
@sbindir@.
* init/upstart/Makefile.am (EXTRA_DIST): Distribute
binfmt-support.conf.in.
(CLEANFILES): Clean binfmt-support.conf.
(dist_upstart_DATA): Rename to ...
(upstart_DATA): ... this.
(binfmt-support.conf): Generate from binfmt-support.conf.in.
* .gitignore: Add init/sysvinit/binfmt-support.sh and
init/upstart/binfmt-support.conf.
* NEWS: Document this.
2014-02-07 Colin Watson
Ensure all necessary directories exist after installation
* configure.ac: Add AC_PROG_MKDIR_P.
* src/Makefile.am (install-data-hook): Create $(admindir) and
$(importdir).
* NEWS: Document this.
2014-02-07 Colin Watson
Stop hardcoding Debian defaults for various directories
* configure.ac: Substitute admindir, importdir, and procdir.
* man/update-binfmts.8: Rename to ...
* man/update-binfmts.man8: ... this, without hardcoding directories.
* man/Makefile.am (dist_man8_MANS): Rename to ...
(man8_MANS): ... this.
(CLEANFILES): Clean $(man8_MANS).
(.man8.8): Generate manual page with appropriate substitutions.
(dist-hook): Distribute update-binfmts.man8.
* src/Makefile.am (AM_CPPFLAGS): Define ADMINDIR, IMPORTDIR,
PROCDIR, and AUXDIR.
* src/paths.c (admindir, importdir, procdir, auxdir): Use
definitions rather than hardcoding.
* src/run-detectors.c (options): Likewise.
* src/update-binfmts.c (options): Likewise.
* .gitignore: Add man/update-binfmts.8.
* NEWS: Document this.
2014-02-06 Colin Watson
Upgrade to Automake 1.14.1.
2013-12-29 Colin Watson
Version: 2.1.1.
2013-12-29 Colin Watson
Fix installation of systemd unit files.
* configure.ac (AC_CONFIG_FILES): Remove
init/systemd/binfmt-support.service.
* init/systemd/Makefile.am (EXTRA_DIST): Add
binfmt-support.service.in.
(CLEANFILES): Add binfmt-support.service.
(systemdsystemunit_DATA): Rename to ...
(nodist_systemdsystemunit_DATA): ... this.
(binfmt-support.service): Generate from binfmt-support.service.in.
* NEWS: Document this.
2013-12-29 Colin Watson
* configure.ac: Fix --with-systemdsystemunitdir.
* .gitignore: Add **/*.a and **/*.o.
Version: 2.1.0.
* Makefile.am (gen_start_date): Fix fencepost error.
2013-12-29 Colin Watson
Add a systemd unit file.
* configure.ac: Add --with-systemdsystemunitdir option.
(AC_CONFIG_FILES): Add init/systemd/Makefile and
init/systemd/binfmt-support.service.
* Makefile.am (DISTCHECK_CONFIGURE_FLAGS): Ensure that
--with-systemdsystemunitdir points under ${prefix}.
* init/Makefile.am (SUBDIRS): Add systemd.
* init/systemd/Makefile.am: New file.
* init/systemd/binfmt-support.service.in: New file.
* NEWS: Document this.
* .gitignore: Update.
2013-12-29 Colin Watson
Add copyright/licence notices to init files.
* .gitignore: Remove Debian-specific files.
* NEWS: New file.
2013-12-29 Colin Watson
Add sample init configuration.
* Makefile.am (SUBDIRS): Add init.
* configure.ac (AC_CONFIG_FILES): Add init/Makefile,
init/sysvinit/Makefile, and init/upstart/Makefile.
* init/Makefile.am: New file.
* init/sysvinit/Makefile.am: New file.
* init/sysvinit/binfmt-support.sh: New file, stripped down from
debian/init.d in the Debian packaging.
* init/upstart/Makefile.am: New file.
* init/upstart/binfmt-support.conf: New file, copied from
debian/upstart in the Debian packaging.
2013-12-29 Colin Watson
gnulib: Import gnupload module.
2013-12-29 Colin Watson
Improve accuracy of "make dist".
* Makefile.am (SUBDIRS): Add doc.
(EXTRA_DIST): Add gnulib/m4/math_h.m4.
* configure.ac (AC_CONFIG_FILES): Add doc/Makefile.
* doc/Makefile.am: New file.
2013-12-29 Colin Watson
Stop trying to distribute non-existent files.
* Makefile.am (EXTRA_DIST): Remove gnulib/gets.patch and
gnulib/lib/argp-parse.patch.
2013-12-29 Colin Watson
Automatically generate ChangeLog from git
* Makefile.am (dist-hook): Add gen-ChangeLog.
(gen-ChangeLog): New rule, based on that in coreutils.
* gnulib: Import gitlog-to-changelog module.
* .gitignore: Add **/*~.
2013-12-29 Colin Watson
Remove Debian packaging.
* debian/changelog: Copy to ...
* ChangeLog-2013: ... here.
* Makefile.am (EXTRA_DIST): Add ChangeLog-2013.
* configure.ac (AC_INIT): Stop autogenerating version from
debian/changelog. Bump to 2.1.0.
2013-12-29 Colin Watson
Move to git.
* .bzrignore: Move to ...
* .gitignore: ... here, adjusting for differences between bzr and
git.
* Makefile.am (EXTRA_DIST): Replace .bzrignore with .gitignore.
* gnulib: Add --no-vc-files.
binfmt-support-2.2.2/ChangeLog-2013 0000666 0000000 0000000 00000044606 14246241610 013550 0000000 0000000 Previous versions of binfmt-support were maintained solely as a Debian
package. The following is the complete changelog up to the point where
binfmt-support gained its own upstream existence.
binfmt-support (2.0.16) unstable; urgency=low
* Use dh-autoreconf to keep autotools output up to date, especially for
new ports.
* Upgrade to Automake 1.14 and Gnulib 20130805-stable. gnulib/gets.patch
is no longer needed.
-- Colin Watson Wed, 13 Nov 2013 16:04:25 +0000
binfmt-support (2.0.15) unstable; urgency=low
* Build-depend on debhelper (>= 9~) directly rather than requiring a
Lintian override for use of 8.9.0.
* Upgrade to Automake 1.13.2 and autotools-dev 20130515.1.
-- Colin Watson Fri, 07 Jun 2013 11:38:48 +0100
binfmt-support (2.0.14) unstable; urgency=low
* Install Upstart job on Debian as well, following new recommendations in
https://wiki.ubuntu.com/UpstartCompatibleInitScripts.
-- Colin Watson Wed, 22 May 2013 09:23:42 +0100
binfmt-support (2.0.13) unstable; urgency=low
* Drop python build-dependency; fuse is hardly ever available in
autobuilding environments anyway, so it's ineffective. The test suite
is still useful for manual testing.
-- Colin Watson Fri, 07 Dec 2012 13:55:37 +0000
binfmt-support (2.0.12) unstable; urgency=low
* Fix ineffective --find test.
* Don't show disabled formats in --find output (closes: #689247).
-- Colin Watson Sun, 30 Sep 2012 22:25:11 +0100
binfmt-support (2.0.11) unstable; urgency=low
* Backport Gnulib commit 66712c23388e93e5c518ebc8515140fa0c807348 to stop
assuming gets.
-- Colin Watson Tue, 18 Sep 2012 00:05:32 +0100
binfmt-support (2.0.10) unstable; urgency=low
* If a binary format is already enabled according to the kernel, which can
happen in chroots if it was installed in the host system, then continue
as gracefully as we can manage rather than exiting non-zero (closes:
#680349).
* Upgrade to Automake 1.11.6.
-- Colin Watson Mon, 30 Jul 2012 10:36:59 +0100
binfmt-support (2.0.9) unstable; urgency=low
* Make src/tests/binfmt_misc.py compatible with Python 3.
* Build with V=1 so that tools such as blhc can scan more effectively for
missing build flags.
* Convert debian/copyright to copyright-format 1.0.
* Upgrade to Autoconf 2.69, Automake 1.11.5, and Gnulib 20120404-stable.
gnulib/lib/argp-parse.patch is no longer needed.
-- Colin Watson Tue, 26 Jun 2012 00:22:20 +0100
binfmt-support (2.0.8) unstable; urgency=low
* Only print informational messages on non-Linux systems if stderr is a
terminal. This allows saving a couple of processes from the Upstart
job.
* Convert to dpkg-buildflags, using debhelper v9.
-- Colin Watson Sun, 20 Nov 2011 17:24:19 +0000
binfmt-support (2.0.7) unstable; urgency=low
* Fix display tests to actually test the output of --display.
* Upgrade to Gnulib 20110908-stable.
* Display a useful error message rather than crashing if asked to display
a non-existent binary format (closes: #643756, LP: #792601).
-- Colin Watson Thu, 29 Sep 2011 12:38:22 +0100
binfmt-support (2.0.6) unstable; urgency=low
* Remove /var/lib/binfmts on purge (closes: #635449).
-- Colin Watson Tue, 26 Jul 2011 09:41:55 +0100
binfmt-support (2.0.5) unstable; urgency=low
* Update Vcs-Bzr field for Alioth changes.
* Add an Upstart job, installed only on Ubuntu-derived distributions.
* Upgrade to Autoconf 2.68 and Gnulib 20110609-stable.
* Remove temporary test directory when skipping a test.
-- Colin Watson Sun, 10 Jul 2011 01:15:31 +0100
binfmt-support (2.0.4) unstable; urgency=low
* Add a basic test for --find.
* Use 'fusermount -u' rather than umount when running tests.
-- Colin Watson Tue, 22 Mar 2011 10:39:11 +0000
binfmt-support (2.0.3) unstable; urgency=low
* Mark binfmt-support Multi-Arch: foreign.
-- Colin Watson Tue, 22 Feb 2011 12:26:13 +0000
binfmt-support (2.0.2) unstable; urgency=low
* Upload to unstable.
-- Colin Watson Tue, 08 Feb 2011 10:22:00 +0000
binfmt-support (2.0.1) experimental; urgency=low
* Add a --find option to print the list of interpreters for an executable.
Requested by LoĆÆc Minier.
* Fix crash if get_import returns NULL (LP: #686115).
* Fix hexadecimal expansion to ensure that we only ever parse exactly two
hex digits.
* Use mem* functions rather than str* on binary data when finding
interpreters.
-- Colin Watson Tue, 25 Jan 2011 14:30:52 +0000
binfmt-support (2.0.0) experimental; urgency=low
* Rewrite in C (closes: #602920).
* Upgrade to GPLv3 or later, mostly due to Gnulib.
* Use a separate build directory.
* Add a test suite. This does nothing useful during a default Debian
package build as it currently requires FUSE, but it can be run by hand.
* Add option parsing to run-detectors, mainly so that we can have an
--admindir option for use by the test suite but also to provide a useful
--help.
* Remove cache directory hack, no longer necessary now that we aren't
pulling in Perl at boot time.
-- Colin Watson Mon, 22 Nov 2010 11:15:58 +0000
binfmt-support (1.2.20) experimental; urgency=low
* Fix =~ operator typo in Binfmt::Format.
-- Colin Watson Tue, 16 Nov 2010 17:57:31 +0000
binfmt-support (1.2.19) experimental; urgency=low
* Drop error/warning wrapping; it was cute in 2000, but I find it annoying
now. Use the 'say' feature from Perl 5.10.
* Convert from 'perl -w' to 'use warnings'.
* Strip trailing whitespace from values in database and format files.
* Upgrade to debhelper 8.
-- Colin Watson Tue, 16 Nov 2010 16:16:09 +0000
binfmt-support (1.2.18) unstable; urgency=low
* Convert to source format 3.0 (native).
* Only warn about corrupted files in /var/lib/binfmts/ when we can't
continue without their contents (LP: #547052).
-- Colin Watson Sat, 27 Mar 2010 15:30:40 +0000
binfmt-support (1.2.17) unstable; urgency=low
[ Colin Watson ]
* Exit cleanly on non-Linux systems, rather than causing inconvenient
knock-on errors (closes: #565109).
[ LoĆÆc Minier ]
* Add a new optional field "credentials" which when set to "yes"
corresponds to the binfmt-misc "C" flag; this allows running setuid root
binaries with the interpreter; LP: #519228.
-- Colin Watson Wed, 17 Feb 2010 14:06:05 +0000
binfmt-support (1.2.16) unstable; urgency=low
* Check whether modprobe is available before using it, this time in the
init script too (closes: #567979).
-- Colin Watson Mon, 01 Feb 2010 17:40:51 +0000
binfmt-support (1.2.15) unstable; urgency=low
* Ignore modprobe failures in init script (thanks, Philipp Weis; closes:
#549113).
-- Colin Watson Thu, 01 Oct 2009 19:18:10 +0100
binfmt-support (1.2.14) unstable; urgency=low
[ Tormod Volden ]
* Maintain a cache of binary format registration instructions, and use
them from shell at boot time if possible to avoid the Perl slow path
(LP: #320822).
-- Colin Watson Tue, 15 Sep 2009 12:48:37 +0100
binfmt-support (1.2.13) unstable; urgency=low
* Upgrade to debhelper 7. Uses override targets, so requires 7.0.50.
* Check that /etc/default/rcS exists before sourcing it.
* Stop hardcoding path to update-binfmts.
* Remove Default-Stop from init script; cf. changelog entry for 1.2.8.
-- Colin Watson Mon, 07 Sep 2009 02:19:38 +0100
binfmt-support (1.2.12) unstable; urgency=low
* Moved to bzr.debian.org; add Vcs-Bzr control field.
* Some packages (hi, mono) occasionally seem to try to remove formats that
weren't installed and thus don't have an entry in the administration
directory. Make this non-fatal, since the state is already as requested.
-- Colin Watson Tue, 26 May 2009 10:13:28 +0100
binfmt-support (1.2.11) unstable; urgency=low
* Recommend POSIX-compliant shell fragments in README.Debian.
* Remove stray 'closedir ADMINDIR' in act_display (closes: #482482).
-- Colin Watson Fri, 23 May 2008 09:20:19 +0100
binfmt-support (1.2.10) unstable; urgency=low
* Fix brown-paper-bag syntax error in Binfmt::Format (thanks, Bastian
Kleineidam; closes: #418343).
* Suppress perl warning about commas within qw().
-- Colin Watson Mon, 09 Apr 2007 18:49:57 +0100
binfmt-support (1.2.9) unstable; urgency=low
* Mount /proc/sys/fs/binfmt_misc nodev, noexec, and nosuid, to guard
against possible future kernel security vulnerabilities.
* Suppress warning on --test --import if the given format file has no
detector line (closes: #383287).
-- Colin Watson Sun, 08 Apr 2007 21:32:00 +0100
binfmt-support (1.2.8) unstable; urgency=low
* Disabling binfmt-support on system shutdown is rather pointless, so stop
doing it.
* Move debhelper from Build-Depends-Indep to Build-Depends (for clean
target).
* Use debhelper v4.
-- Colin Watson Tue, 2 May 2006 23:27:09 +0100
binfmt-support (1.2.7) unstable; urgency=low
* Remove outdated skeleton comments in init script, since there's very
little of the skeleton left.
* Add LSB info to init script.
* Use log_daemon_msg from lsb-base (>= 3.0-6) for more policy-compliant
init script output.
-- Colin Watson Thu, 27 Oct 2005 13:17:31 +0100
binfmt-support (1.2.6) unstable; urgency=low
* Mount binfmt_misc filesystem as 'binfmt_misc' rather than 'none'
(thanks, Roucaries Bastien; closes: #328827).
-- Colin Watson Sat, 17 Sep 2005 17:18:38 +0100
binfmt-support (1.2.5) unstable; urgency=low
[ Colin Watson ]
* Stop the postinst/prerm from exiting non-zero if update-binfmts fails,
for example if you're running something other than Linux
(closes: #322193).
* Policy version 3.6.2. No changes required.
* Update GPL notices with the FSF's new address.
[ Scott James Remnant ]
* Use lsb functions in init script.
-- Colin Watson Tue, 30 Aug 2005 17:48:51 +0100
binfmt-support (1.2.4) hoary; urgency=low
* Move binfmt-support to start at 90 rather than 20
-- Thom May Fri, 10 Dec 2004 18:19:02 +0100
binfmt-support (1.2.3) unstable; urgency=low
* Convert binfmt-support(8) to the -mdoc macro set.
-- Colin Watson Thu, 1 Apr 2004 13:49:02 +0100
binfmt-support (1.2.2) unstable; urgency=low
* Document the 'detector' option in format files.
* Don't bother trying to unload the binfmt_misc kernel module when
stopping, since (a) it means we run into a kernel bug, (b) it means we
have to keep track of whether the module was loaded by the administrator
before starting, and (c) it's unimportant anyway. Reassigns #155570 to
kernel.
* Policy version 3.5.9: no changes required.
-- Colin Watson Sat, 26 Apr 2003 19:07:39 +0100
binfmt-support (1.2.1) unstable; urgency=low
* Cosmetic improvements to debian/rules.
* Make update-binfmts(8) render properly under groff's utf8 device: in
particular, use '\-' rather than '-' where a real dash is needed.
-- Colin Watson Mon, 24 Feb 2003 01:48:43 +0000
binfmt-support (1.2.0) unstable; urgency=low
* Support for userspace detectors, at the request of the Mono folks. See
/usr/share/doc/binfmt-support/detectors for the rationale and design.
This involved substantial rearrangements of the code, so we now have a
couple of Perl modules in the Binfmt:: namespace. They don't have a
published interface, so writing code using them directly is a bad idea.
* Check that interpreters (and the new detectors) are executable.
* Localize all filehandles.
* Policy version 3.5.8: drop /usr/doc symlink.
-- Colin Watson Wed, 11 Dec 2002 13:46:12 +0000
binfmt-support (1.1.5) unstable; urgency=low
* Check (again - how did I lose this?) for the existence of $register, not
$procdir, when deciding whether to try loading the kernel module
(closes: #134206).
-- Colin Watson Tue, 5 Mar 2002 21:37:32 +0000
binfmt-support (1.1.4) unstable; urgency=low
* The "phone me if you want a bug fixed" release. :-)
* Apply more careful logic to loading and mounting binfmt_misc on newer
kernels (thanks, Daniel Silverstone; closes: #131236).
* Remove emacs local variables from this changelog.
-- Colin Watson Sun, 3 Feb 2002 20:37:30 +0000
binfmt-support (1.1.3) unstable; urgency=low
* Recommend in README.Debian that packages using --import conflict with
binfmt-support (<< 1.1.2).
-- Colin Watson Sat, 26 Jan 2002 19:05:34 +0000
binfmt-support (1.1.2) unstable; urgency=low
* Fix thinko that meant some warnings weren't printed.
* Make much more careful use of return codes throughout.
* When deciding whether to load the binfmt_misc module, check for the
existence of /proc/sys/fs/binfmt_misc/register, not merely the
directory. It seems that recent kernels can leave the directory hanging
around even after the module is removed (closes: #129400, #129621).
-- Colin Watson Sat, 19 Jan 2002 19:14:58 +0000
binfmt-support (1.1.1) unstable; urgency=medium
* Return non-fatally if binfmt_misc couldn't be loaded (see #129170).
-- Colin Watson Mon, 14 Jan 2002 13:52:32 +0000
binfmt-support (1.1.0) unstable; urgency=low
* Implement an --import option to allow packages to install format files
without depending on binfmt-support. All format files will be imported
by binfmt-support when it's eventually installed (closes: #119694).
* Update lots of documentation in line with this.
* Install the directory /usr/share/binfmts for format files.
* Don't attempt to load and unload the binfmt_misc kernel module in --test
mode.
* Use Text::Wrap rather than my own wrap() function.
* General code cleanup.
* get_binfmt() now returns a hash, not an array.
* Apply better nroff style to the man page.
* Policy version 3.5.6.
* Perl policy version 1.20.
-- Colin Watson Sun, 6 Jan 2002 13:58:51 +0000
binfmt-support (1.0.6) unstable; urgency=low
* Check whether modprobe is available before using it (closes: #106090).
-- Colin Watson Sat, 21 Jul 2001 17:18:10 +0100
binfmt-support (1.0.5) unstable; urgency=low
* Updated to policy version 3.5.2: no changes required.
* Remove duplicate conffiles entry.
* Support recent -ac kernels which require binfmt_misc to be mounted as a
filesystem. For now, it seems neatest to mount it over
/proc/sys/fs/binfmt_misc, but that may change (especially as it's not
clear whether that directory will always exist).
* If disabling all binary formats, also unmount the filesystem if
necessary, and unload the kernel module. This will help upgrading in the
future if the kernel interface is changed again.
-- Colin Watson Fri, 27 Apr 2001 11:58:01 +0100
binfmt-support (1.0.4) unstable; urgency=low
* Uploaded to Debian (closes: #78872).
* New maintainer address.
* Standards-Version: 3.5.1: no changes required.
* Use debhelper v3.
* Updated to new Perl policy.
* This is Architecture: all, so use the binary-indep target in
debian/rules rather than the binary-arch target.
* Started updating the version number automagically.
* Pointed URL in copyright file to the package pool.
* --display can now be called without an argument to display all known
binary formats and whether they are enabled; its output looks better,
too.
* Improved --test option.
* Don't hardcode ENOENT any more, anticipating future Hurd support.
* Print an error message on startup if the operating system isn't Linux
(although the package can still be installed).
* Recoded the option parsing and the actions into dispatch tables.
* Really test for existence of /usr/sbin/update-binfmts in init script.
* Fixed formatting error in man page (\x is an escape sequence).
* "Debian GNU/Linux" -> "Debian GNU".
-- Colin Watson Sat, 17 Feb 2001 14:38:55 +0000
binfmt-support (1.0.3) unstable; urgency=low
* D'oh. update-binfmts should have been in /usr/sbin all along. Updated
README.Debian to account for this.
* Included the GPL in the source package.
* Improved --install/--remove logic:
- Remove entries even if their interpreter has changed, otherwise
deliberately changing interpreters becomes rather awkward. We only
need to make sure that the package is the same.
- --install will now disable existing /proc entries as long as
/var/lib/binfmts is consistent. Without this, you could sometimes end
up with multiple entries in /proc with the same name, due to a kernel
bug. Added some extra checking to make this even less likely.
- Don't warn about there being no /proc entry when removing. This can
easily happen on upgrades, and it also helps maintainer scripts to be
idempotent.
* Running --enable and/or --disable multiple times now doesn't create
multiple entries in /proc with the same name either.
-- Colin Watson Sun, 10 Dec 2000 00:24:18 +0000
binfmt-support (1.0.2) unstable; urgency=low
* Standards-Version: 3.2.1: no changes required.
* Build-Depends-Indep: rather than Build-Depends:.
* Use debhelper DH_COMPAT=2.
* debian/rules: cleanup.
* Don't 'use diagnostics'; it's slow.
* Some additions to the man page.
* Oops, remember to update $VERSION this time.
* Added debian/TODO.
* Added note in README.Debian about requiring binfmt_misc.
-- Colin Watson Wed, 6 Dec 2000 00:45:44 +0000
binfmt-support (1.0.1) unstable; urgency=low
* Improved long description (sysadmins can use update-binfmts too).
* Standards-Version: 3.1.1, Build-Depends: line.
-- Colin Watson Tue, 30 May 2000 23:18:58 +0100
binfmt-support (1.0) unstable; urgency=low
* Initial Release.
-- Colin Watson Tue, 16 May 2000 23:46:15 +0100
binfmt-support-2.2.2/Makefile.am 0000666 0000000 0000000 00000003120 14246241610 013431 0000000 0000000 ## Process this file with automake to produce Makefile.in
## Copyright (C) 2010 Colin Watson.
##
## This file is part of binfmt-support.
##
## binfmt-support is free software; you can redistribute it and/or modify it
## under the terms of the GNU General Public License as published by the
## Free Software Foundation; either version 3 of the License, or (at your
## option) any later version.
##
## binfmt-support is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
## Public License for more details.
##
## You should have received a copy of the GNU General Public License along
## with binfmt-support; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
SUBDIRS = gl/lib src doc man init
EXTRA_DIST = \
.gitignore \
ChangeLog-2013 \
bootstrap \
bootstrap.conf
# These macro files are imported by gnulib-tool, but at present not used.
# We include them in the distribution anyway for maximum consistency.
EXTRA_DIST += \
gl/m4/math_h.m4
ACLOCAL_AMFLAGS = -I gl/m4 -I m4
dist-hook: gen-ChangeLog
gen_start_date = 2013-12-28
.PHONY: gen-ChangeLog
gen-ChangeLog:
$(AM_V_GEN)if test -d .git; then \
$(top_srcdir)/build-aux/gitlog-to-changelog \
--format='%s%n%n%b%n' \
--since="$(gen_start_date)" > $(distdir)/cl-t; \
rm -f $(distdir)/ChangeLog; \
mv $(distdir)/cl-t $(distdir)/ChangeLog; \
fi
DISTCHECK_CONFIGURE_FLAGS = \
--with-systemdsystemunitdir=\$${prefix}/$(systemdsystemunitdir)
binfmt-support-2.2.2/Makefile.in 0000644 0000000 0000000 00000172074 14246242217 013461 0000000 0000000 # Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/binfmt-tar-sort-name.m4 \
$(top_srcdir)/gl/m4/00gnulib.m4 \
$(top_srcdir)/gl/m4/__inline.m4 \
$(top_srcdir)/gl/m4/absolute-header.m4 \
$(top_srcdir)/gl/m4/alloca.m4 $(top_srcdir)/gl/m4/argp.m4 \
$(top_srcdir)/gl/m4/builtin-expect.m4 \
$(top_srcdir)/gl/m4/calloc.m4 \
$(top_srcdir)/gl/m4/canonicalize.m4 \
$(top_srcdir)/gl/m4/close.m4 \
$(top_srcdir)/gl/m4/double-slash-root.m4 \
$(top_srcdir)/gl/m4/dup2.m4 $(top_srcdir)/gl/m4/eealloc.m4 \
$(top_srcdir)/gl/m4/errno_h.m4 $(top_srcdir)/gl/m4/error.m4 \
$(top_srcdir)/gl/m4/exponentd.m4 \
$(top_srcdir)/gl/m4/extensions.m4 \
$(top_srcdir)/gl/m4/extern-inline.m4 \
$(top_srcdir)/gl/m4/fcntl-o.m4 $(top_srcdir)/gl/m4/fcntl.m4 \
$(top_srcdir)/gl/m4/fcntl_h.m4 $(top_srcdir)/gl/m4/float_h.m4 \
$(top_srcdir)/gl/m4/free.m4 $(top_srcdir)/gl/m4/fstat.m4 \
$(top_srcdir)/gl/m4/getdelim.m4 \
$(top_srcdir)/gl/m4/getdtablesize.m4 \
$(top_srcdir)/gl/m4/getline.m4 $(top_srcdir)/gl/m4/getopt.m4 \
$(top_srcdir)/gl/m4/getprogname.m4 \
$(top_srcdir)/gl/m4/gnulib-common.m4 \
$(top_srcdir)/gl/m4/gnulib-comp.m4 \
$(top_srcdir)/gl/m4/include_next.m4 \
$(top_srcdir)/gl/m4/intmax_t.m4 \
$(top_srcdir)/gl/m4/inttypes.m4 \
$(top_srcdir)/gl/m4/inttypes_h.m4 \
$(top_srcdir)/gl/m4/largefile.m4 \
$(top_srcdir)/gl/m4/lib-ignore.m4 \
$(top_srcdir)/gl/m4/limits-h.m4 $(top_srcdir)/gl/m4/lstat.m4 \
$(top_srcdir)/gl/m4/malloc.m4 $(top_srcdir)/gl/m4/malloca.m4 \
$(top_srcdir)/gl/m4/manywarnings.m4 \
$(top_srcdir)/gl/m4/memchr.m4 $(top_srcdir)/gl/m4/mempcpy.m4 \
$(top_srcdir)/gl/m4/minmax.m4 $(top_srcdir)/gl/m4/mmap-anon.m4 \
$(top_srcdir)/gl/m4/mode_t.m4 \
$(top_srcdir)/gl/m4/msvc-inval.m4 \
$(top_srcdir)/gl/m4/msvc-nothrow.m4 \
$(top_srcdir)/gl/m4/multiarch.m4 \
$(top_srcdir)/gl/m4/nocrash.m4 $(top_srcdir)/gl/m4/off_t.m4 \
$(top_srcdir)/gl/m4/open-cloexec.m4 \
$(top_srcdir)/gl/m4/open-slash.m4 $(top_srcdir)/gl/m4/open.m4 \
$(top_srcdir)/gl/m4/pathmax.m4 $(top_srcdir)/gl/m4/printf.m4 \
$(top_srcdir)/gl/m4/rawmemchr.m4 \
$(top_srcdir)/gl/m4/readlink.m4 $(top_srcdir)/gl/m4/realloc.m4 \
$(top_srcdir)/gl/m4/reallocarray.m4 \
$(top_srcdir)/gl/m4/rename.m4 $(top_srcdir)/gl/m4/rmdir.m4 \
$(top_srcdir)/gl/m4/size_max.m4 $(top_srcdir)/gl/m4/sleep.m4 \
$(top_srcdir)/gl/m4/ssize_t.m4 \
$(top_srcdir)/gl/m4/stat-time.m4 $(top_srcdir)/gl/m4/stat.m4 \
$(top_srcdir)/gl/m4/stdalign.m4 $(top_srcdir)/gl/m4/stdarg.m4 \
$(top_srcdir)/gl/m4/stdbool.m4 $(top_srcdir)/gl/m4/stddef_h.m4 \
$(top_srcdir)/gl/m4/stdint.m4 $(top_srcdir)/gl/m4/stdint_h.m4 \
$(top_srcdir)/gl/m4/stdio_h.m4 $(top_srcdir)/gl/m4/stdlib_h.m4 \
$(top_srcdir)/gl/m4/strcase.m4 \
$(top_srcdir)/gl/m4/strchrnul.m4 \
$(top_srcdir)/gl/m4/strerror.m4 \
$(top_srcdir)/gl/m4/string_h.m4 \
$(top_srcdir)/gl/m4/strings_h.m4 \
$(top_srcdir)/gl/m4/strndup.m4 $(top_srcdir)/gl/m4/strnlen.m4 \
$(top_srcdir)/gl/m4/sys_socket_h.m4 \
$(top_srcdir)/gl/m4/sys_stat_h.m4 \
$(top_srcdir)/gl/m4/sys_types_h.m4 \
$(top_srcdir)/gl/m4/sysexits.m4 $(top_srcdir)/gl/m4/time_h.m4 \
$(top_srcdir)/gl/m4/unistd_h.m4 \
$(top_srcdir)/gl/m4/vasnprintf.m4 \
$(top_srcdir)/gl/m4/vasprintf.m4 \
$(top_srcdir)/gl/m4/vsnprintf.m4 \
$(top_srcdir)/gl/m4/warn-on-use.m4 \
$(top_srcdir)/gl/m4/warnings.m4 $(top_srcdir)/gl/m4/wchar_h.m4 \
$(top_srcdir)/gl/m4/wchar_t.m4 $(top_srcdir)/gl/m4/wint_t.m4 \
$(top_srcdir)/gl/m4/xalloc.m4 $(top_srcdir)/gl/m4/xsize.m4 \
$(top_srcdir)/gl/m4/xstrndup.m4 \
$(top_srcdir)/gl/m4/xvasprintf.m4 \
$(top_srcdir)/gl/m4/year2038.m4 \
$(top_srcdir)/gl/m4/zzgnulib.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/build-aux/compile \
$(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
$(top_srcdir)/build-aux/missing COPYING NEWS.md README.md \
build-aux/compile build-aux/config.guess build-aux/config.sub \
build-aux/install-sh build-aux/missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
AR = @AR@
ARFLAGS = @ARFLAGS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
ENOLINK_VALUE = @ENOLINK_VALUE@
EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
ERRNO_H = @ERRNO_H@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FLOAT_H = @FLOAT_H@
GETOPT_CDEFS_H = @GETOPT_CDEFS_H@
GETOPT_H = @GETOPT_H@
GL_CFLAG_ALLOW_WARNINGS = @GL_CFLAG_ALLOW_WARNINGS@
GL_CFLAG_GNULIB_WARNINGS = @GL_CFLAG_GNULIB_WARNINGS@
GL_GNULIB_ACCESS = @GL_GNULIB_ACCESS@
GL_GNULIB_ALIGNED_ALLOC = @GL_GNULIB_ALIGNED_ALLOC@
GL_GNULIB_ATOLL = @GL_GNULIB_ATOLL@
GL_GNULIB_BTOWC = @GL_GNULIB_BTOWC@
GL_GNULIB_CALLOC_GNU = @GL_GNULIB_CALLOC_GNU@
GL_GNULIB_CALLOC_POSIX = @GL_GNULIB_CALLOC_POSIX@
GL_GNULIB_CANONICALIZE_FILE_NAME = @GL_GNULIB_CANONICALIZE_FILE_NAME@
GL_GNULIB_CHDIR = @GL_GNULIB_CHDIR@
GL_GNULIB_CHOWN = @GL_GNULIB_CHOWN@
GL_GNULIB_CLOSE = @GL_GNULIB_CLOSE@
GL_GNULIB_COPY_FILE_RANGE = @GL_GNULIB_COPY_FILE_RANGE@
GL_GNULIB_CREAT = @GL_GNULIB_CREAT@
GL_GNULIB_CTIME = @GL_GNULIB_CTIME@
GL_GNULIB_DPRINTF = @GL_GNULIB_DPRINTF@
GL_GNULIB_DUP = @GL_GNULIB_DUP@
GL_GNULIB_DUP2 = @GL_GNULIB_DUP2@
GL_GNULIB_DUP3 = @GL_GNULIB_DUP3@
GL_GNULIB_ENVIRON = @GL_GNULIB_ENVIRON@
GL_GNULIB_EUIDACCESS = @GL_GNULIB_EUIDACCESS@
GL_GNULIB_EXECL = @GL_GNULIB_EXECL@
GL_GNULIB_EXECLE = @GL_GNULIB_EXECLE@
GL_GNULIB_EXECLP = @GL_GNULIB_EXECLP@
GL_GNULIB_EXECV = @GL_GNULIB_EXECV@
GL_GNULIB_EXECVE = @GL_GNULIB_EXECVE@
GL_GNULIB_EXECVP = @GL_GNULIB_EXECVP@
GL_GNULIB_EXECVPE = @GL_GNULIB_EXECVPE@
GL_GNULIB_EXPLICIT_BZERO = @GL_GNULIB_EXPLICIT_BZERO@
GL_GNULIB_FACCESSAT = @GL_GNULIB_FACCESSAT@
GL_GNULIB_FCHDIR = @GL_GNULIB_FCHDIR@
GL_GNULIB_FCHMODAT = @GL_GNULIB_FCHMODAT@
GL_GNULIB_FCHOWNAT = @GL_GNULIB_FCHOWNAT@
GL_GNULIB_FCLOSE = @GL_GNULIB_FCLOSE@
GL_GNULIB_FCNTL = @GL_GNULIB_FCNTL@
GL_GNULIB_FDATASYNC = @GL_GNULIB_FDATASYNC@
GL_GNULIB_FDOPEN = @GL_GNULIB_FDOPEN@
GL_GNULIB_FFLUSH = @GL_GNULIB_FFLUSH@
GL_GNULIB_FFS = @GL_GNULIB_FFS@
GL_GNULIB_FFSL = @GL_GNULIB_FFSL@
GL_GNULIB_FFSLL = @GL_GNULIB_FFSLL@
GL_GNULIB_FGETC = @GL_GNULIB_FGETC@
GL_GNULIB_FGETS = @GL_GNULIB_FGETS@
GL_GNULIB_FOPEN = @GL_GNULIB_FOPEN@
GL_GNULIB_FOPEN_GNU = @GL_GNULIB_FOPEN_GNU@
GL_GNULIB_FPRINTF = @GL_GNULIB_FPRINTF@
GL_GNULIB_FPRINTF_POSIX = @GL_GNULIB_FPRINTF_POSIX@
GL_GNULIB_FPURGE = @GL_GNULIB_FPURGE@
GL_GNULIB_FPUTC = @GL_GNULIB_FPUTC@
GL_GNULIB_FPUTS = @GL_GNULIB_FPUTS@
GL_GNULIB_FREAD = @GL_GNULIB_FREAD@
GL_GNULIB_FREE_POSIX = @GL_GNULIB_FREE_POSIX@
GL_GNULIB_FREOPEN = @GL_GNULIB_FREOPEN@
GL_GNULIB_FSCANF = @GL_GNULIB_FSCANF@
GL_GNULIB_FSEEK = @GL_GNULIB_FSEEK@
GL_GNULIB_FSEEKO = @GL_GNULIB_FSEEKO@
GL_GNULIB_FSTAT = @GL_GNULIB_FSTAT@
GL_GNULIB_FSTATAT = @GL_GNULIB_FSTATAT@
GL_GNULIB_FSYNC = @GL_GNULIB_FSYNC@
GL_GNULIB_FTELL = @GL_GNULIB_FTELL@
GL_GNULIB_FTELLO = @GL_GNULIB_FTELLO@
GL_GNULIB_FTRUNCATE = @GL_GNULIB_FTRUNCATE@
GL_GNULIB_FUTIMENS = @GL_GNULIB_FUTIMENS@
GL_GNULIB_FWRITE = @GL_GNULIB_FWRITE@
GL_GNULIB_GETC = @GL_GNULIB_GETC@
GL_GNULIB_GETCHAR = @GL_GNULIB_GETCHAR@
GL_GNULIB_GETCWD = @GL_GNULIB_GETCWD@
GL_GNULIB_GETDELIM = @GL_GNULIB_GETDELIM@
GL_GNULIB_GETDOMAINNAME = @GL_GNULIB_GETDOMAINNAME@
GL_GNULIB_GETDTABLESIZE = @GL_GNULIB_GETDTABLESIZE@
GL_GNULIB_GETENTROPY = @GL_GNULIB_GETENTROPY@
GL_GNULIB_GETGROUPS = @GL_GNULIB_GETGROUPS@
GL_GNULIB_GETHOSTNAME = @GL_GNULIB_GETHOSTNAME@
GL_GNULIB_GETLINE = @GL_GNULIB_GETLINE@
GL_GNULIB_GETLOADAVG = @GL_GNULIB_GETLOADAVG@
GL_GNULIB_GETLOGIN = @GL_GNULIB_GETLOGIN@
GL_GNULIB_GETLOGIN_R = @GL_GNULIB_GETLOGIN_R@
GL_GNULIB_GETOPT_POSIX = @GL_GNULIB_GETOPT_POSIX@
GL_GNULIB_GETPAGESIZE = @GL_GNULIB_GETPAGESIZE@
GL_GNULIB_GETPASS = @GL_GNULIB_GETPASS@
GL_GNULIB_GETPASS_GNU = @GL_GNULIB_GETPASS_GNU@
GL_GNULIB_GETSUBOPT = @GL_GNULIB_GETSUBOPT@
GL_GNULIB_GETUMASK = @GL_GNULIB_GETUMASK@
GL_GNULIB_GETUSERSHELL = @GL_GNULIB_GETUSERSHELL@
GL_GNULIB_GRANTPT = @GL_GNULIB_GRANTPT@
GL_GNULIB_GROUP_MEMBER = @GL_GNULIB_GROUP_MEMBER@
GL_GNULIB_IMAXABS = @GL_GNULIB_IMAXABS@
GL_GNULIB_IMAXDIV = @GL_GNULIB_IMAXDIV@
GL_GNULIB_ISATTY = @GL_GNULIB_ISATTY@
GL_GNULIB_LCHMOD = @GL_GNULIB_LCHMOD@
GL_GNULIB_LCHOWN = @GL_GNULIB_LCHOWN@
GL_GNULIB_LINK = @GL_GNULIB_LINK@
GL_GNULIB_LINKAT = @GL_GNULIB_LINKAT@
GL_GNULIB_LOCALTIME = @GL_GNULIB_LOCALTIME@
GL_GNULIB_LSEEK = @GL_GNULIB_LSEEK@
GL_GNULIB_LSTAT = @GL_GNULIB_LSTAT@
GL_GNULIB_MALLOC_GNU = @GL_GNULIB_MALLOC_GNU@
GL_GNULIB_MALLOC_POSIX = @GL_GNULIB_MALLOC_POSIX@
GL_GNULIB_MBRLEN = @GL_GNULIB_MBRLEN@
GL_GNULIB_MBRTOWC = @GL_GNULIB_MBRTOWC@
GL_GNULIB_MBSCASECMP = @GL_GNULIB_MBSCASECMP@
GL_GNULIB_MBSCASESTR = @GL_GNULIB_MBSCASESTR@
GL_GNULIB_MBSCHR = @GL_GNULIB_MBSCHR@
GL_GNULIB_MBSCSPN = @GL_GNULIB_MBSCSPN@
GL_GNULIB_MBSINIT = @GL_GNULIB_MBSINIT@
GL_GNULIB_MBSLEN = @GL_GNULIB_MBSLEN@
GL_GNULIB_MBSNCASECMP = @GL_GNULIB_MBSNCASECMP@
GL_GNULIB_MBSNLEN = @GL_GNULIB_MBSNLEN@
GL_GNULIB_MBSNRTOWCS = @GL_GNULIB_MBSNRTOWCS@
GL_GNULIB_MBSPBRK = @GL_GNULIB_MBSPBRK@
GL_GNULIB_MBSPCASECMP = @GL_GNULIB_MBSPCASECMP@
GL_GNULIB_MBSRCHR = @GL_GNULIB_MBSRCHR@
GL_GNULIB_MBSRTOWCS = @GL_GNULIB_MBSRTOWCS@
GL_GNULIB_MBSSEP = @GL_GNULIB_MBSSEP@
GL_GNULIB_MBSSPN = @GL_GNULIB_MBSSPN@
GL_GNULIB_MBSSTR = @GL_GNULIB_MBSSTR@
GL_GNULIB_MBSTOK_R = @GL_GNULIB_MBSTOK_R@
GL_GNULIB_MBTOWC = @GL_GNULIB_MBTOWC@
GL_GNULIB_MDA_ACCESS = @GL_GNULIB_MDA_ACCESS@
GL_GNULIB_MDA_CHDIR = @GL_GNULIB_MDA_CHDIR@
GL_GNULIB_MDA_CHMOD = @GL_GNULIB_MDA_CHMOD@
GL_GNULIB_MDA_CLOSE = @GL_GNULIB_MDA_CLOSE@
GL_GNULIB_MDA_CREAT = @GL_GNULIB_MDA_CREAT@
GL_GNULIB_MDA_DUP = @GL_GNULIB_MDA_DUP@
GL_GNULIB_MDA_DUP2 = @GL_GNULIB_MDA_DUP2@
GL_GNULIB_MDA_ECVT = @GL_GNULIB_MDA_ECVT@
GL_GNULIB_MDA_EXECL = @GL_GNULIB_MDA_EXECL@
GL_GNULIB_MDA_EXECLE = @GL_GNULIB_MDA_EXECLE@
GL_GNULIB_MDA_EXECLP = @GL_GNULIB_MDA_EXECLP@
GL_GNULIB_MDA_EXECV = @GL_GNULIB_MDA_EXECV@
GL_GNULIB_MDA_EXECVE = @GL_GNULIB_MDA_EXECVE@
GL_GNULIB_MDA_EXECVP = @GL_GNULIB_MDA_EXECVP@
GL_GNULIB_MDA_EXECVPE = @GL_GNULIB_MDA_EXECVPE@
GL_GNULIB_MDA_FCLOSEALL = @GL_GNULIB_MDA_FCLOSEALL@
GL_GNULIB_MDA_FCVT = @GL_GNULIB_MDA_FCVT@
GL_GNULIB_MDA_FDOPEN = @GL_GNULIB_MDA_FDOPEN@
GL_GNULIB_MDA_FILENO = @GL_GNULIB_MDA_FILENO@
GL_GNULIB_MDA_GCVT = @GL_GNULIB_MDA_GCVT@
GL_GNULIB_MDA_GETCWD = @GL_GNULIB_MDA_GETCWD@
GL_GNULIB_MDA_GETPID = @GL_GNULIB_MDA_GETPID@
GL_GNULIB_MDA_GETW = @GL_GNULIB_MDA_GETW@
GL_GNULIB_MDA_ISATTY = @GL_GNULIB_MDA_ISATTY@
GL_GNULIB_MDA_LSEEK = @GL_GNULIB_MDA_LSEEK@
GL_GNULIB_MDA_MEMCCPY = @GL_GNULIB_MDA_MEMCCPY@
GL_GNULIB_MDA_MKDIR = @GL_GNULIB_MDA_MKDIR@
GL_GNULIB_MDA_MKTEMP = @GL_GNULIB_MDA_MKTEMP@
GL_GNULIB_MDA_OPEN = @GL_GNULIB_MDA_OPEN@
GL_GNULIB_MDA_PUTENV = @GL_GNULIB_MDA_PUTENV@
GL_GNULIB_MDA_PUTW = @GL_GNULIB_MDA_PUTW@
GL_GNULIB_MDA_READ = @GL_GNULIB_MDA_READ@
GL_GNULIB_MDA_RMDIR = @GL_GNULIB_MDA_RMDIR@
GL_GNULIB_MDA_STRDUP = @GL_GNULIB_MDA_STRDUP@
GL_GNULIB_MDA_SWAB = @GL_GNULIB_MDA_SWAB@
GL_GNULIB_MDA_TEMPNAM = @GL_GNULIB_MDA_TEMPNAM@
GL_GNULIB_MDA_TZSET = @GL_GNULIB_MDA_TZSET@
GL_GNULIB_MDA_UMASK = @GL_GNULIB_MDA_UMASK@
GL_GNULIB_MDA_UNLINK = @GL_GNULIB_MDA_UNLINK@
GL_GNULIB_MDA_WCSDUP = @GL_GNULIB_MDA_WCSDUP@
GL_GNULIB_MDA_WRITE = @GL_GNULIB_MDA_WRITE@
GL_GNULIB_MEMCHR = @GL_GNULIB_MEMCHR@
GL_GNULIB_MEMMEM = @GL_GNULIB_MEMMEM@
GL_GNULIB_MEMPCPY = @GL_GNULIB_MEMPCPY@
GL_GNULIB_MEMRCHR = @GL_GNULIB_MEMRCHR@
GL_GNULIB_MKDIR = @GL_GNULIB_MKDIR@
GL_GNULIB_MKDIRAT = @GL_GNULIB_MKDIRAT@
GL_GNULIB_MKDTEMP = @GL_GNULIB_MKDTEMP@
GL_GNULIB_MKFIFO = @GL_GNULIB_MKFIFO@
GL_GNULIB_MKFIFOAT = @GL_GNULIB_MKFIFOAT@
GL_GNULIB_MKNOD = @GL_GNULIB_MKNOD@
GL_GNULIB_MKNODAT = @GL_GNULIB_MKNODAT@
GL_GNULIB_MKOSTEMP = @GL_GNULIB_MKOSTEMP@
GL_GNULIB_MKOSTEMPS = @GL_GNULIB_MKOSTEMPS@
GL_GNULIB_MKSTEMP = @GL_GNULIB_MKSTEMP@
GL_GNULIB_MKSTEMPS = @GL_GNULIB_MKSTEMPS@
GL_GNULIB_MKTIME = @GL_GNULIB_MKTIME@
GL_GNULIB_NANOSLEEP = @GL_GNULIB_NANOSLEEP@
GL_GNULIB_NONBLOCKING = @GL_GNULIB_NONBLOCKING@
GL_GNULIB_OBSTACK_PRINTF = @GL_GNULIB_OBSTACK_PRINTF@
GL_GNULIB_OBSTACK_PRINTF_POSIX = @GL_GNULIB_OBSTACK_PRINTF_POSIX@
GL_GNULIB_OPEN = @GL_GNULIB_OPEN@
GL_GNULIB_OPENAT = @GL_GNULIB_OPENAT@
GL_GNULIB_OVERRIDES_STRUCT_STAT = @GL_GNULIB_OVERRIDES_STRUCT_STAT@
GL_GNULIB_PCLOSE = @GL_GNULIB_PCLOSE@
GL_GNULIB_PERROR = @GL_GNULIB_PERROR@
GL_GNULIB_PIPE = @GL_GNULIB_PIPE@
GL_GNULIB_PIPE2 = @GL_GNULIB_PIPE2@
GL_GNULIB_POPEN = @GL_GNULIB_POPEN@
GL_GNULIB_POSIX_MEMALIGN = @GL_GNULIB_POSIX_MEMALIGN@
GL_GNULIB_POSIX_OPENPT = @GL_GNULIB_POSIX_OPENPT@
GL_GNULIB_PREAD = @GL_GNULIB_PREAD@
GL_GNULIB_PRINTF = @GL_GNULIB_PRINTF@
GL_GNULIB_PRINTF_POSIX = @GL_GNULIB_PRINTF_POSIX@
GL_GNULIB_PTSNAME = @GL_GNULIB_PTSNAME@
GL_GNULIB_PTSNAME_R = @GL_GNULIB_PTSNAME_R@
GL_GNULIB_PUTC = @GL_GNULIB_PUTC@
GL_GNULIB_PUTCHAR = @GL_GNULIB_PUTCHAR@
GL_GNULIB_PUTENV = @GL_GNULIB_PUTENV@
GL_GNULIB_PUTS = @GL_GNULIB_PUTS@
GL_GNULIB_PWRITE = @GL_GNULIB_PWRITE@
GL_GNULIB_QSORT_R = @GL_GNULIB_QSORT_R@
GL_GNULIB_RANDOM = @GL_GNULIB_RANDOM@
GL_GNULIB_RANDOM_R = @GL_GNULIB_RANDOM_R@
GL_GNULIB_RAWMEMCHR = @GL_GNULIB_RAWMEMCHR@
GL_GNULIB_READ = @GL_GNULIB_READ@
GL_GNULIB_READLINK = @GL_GNULIB_READLINK@
GL_GNULIB_READLINKAT = @GL_GNULIB_READLINKAT@
GL_GNULIB_REALLOCARRAY = @GL_GNULIB_REALLOCARRAY@
GL_GNULIB_REALLOC_GNU = @GL_GNULIB_REALLOC_GNU@
GL_GNULIB_REALLOC_POSIX = @GL_GNULIB_REALLOC_POSIX@
GL_GNULIB_REALPATH = @GL_GNULIB_REALPATH@
GL_GNULIB_REMOVE = @GL_GNULIB_REMOVE@
GL_GNULIB_RENAME = @GL_GNULIB_RENAME@
GL_GNULIB_RENAMEAT = @GL_GNULIB_RENAMEAT@
GL_GNULIB_RMDIR = @GL_GNULIB_RMDIR@
GL_GNULIB_RPMATCH = @GL_GNULIB_RPMATCH@
GL_GNULIB_SCANF = @GL_GNULIB_SCANF@
GL_GNULIB_SECURE_GETENV = @GL_GNULIB_SECURE_GETENV@
GL_GNULIB_SETENV = @GL_GNULIB_SETENV@
GL_GNULIB_SETHOSTNAME = @GL_GNULIB_SETHOSTNAME@
GL_GNULIB_SIGABBREV_NP = @GL_GNULIB_SIGABBREV_NP@
GL_GNULIB_SIGDESCR_NP = @GL_GNULIB_SIGDESCR_NP@
GL_GNULIB_SLEEP = @GL_GNULIB_SLEEP@
GL_GNULIB_SNPRINTF = @GL_GNULIB_SNPRINTF@
GL_GNULIB_SPRINTF_POSIX = @GL_GNULIB_SPRINTF_POSIX@
GL_GNULIB_STAT = @GL_GNULIB_STAT@
GL_GNULIB_STDIO_H_NONBLOCKING = @GL_GNULIB_STDIO_H_NONBLOCKING@
GL_GNULIB_STDIO_H_SIGPIPE = @GL_GNULIB_STDIO_H_SIGPIPE@
GL_GNULIB_STPCPY = @GL_GNULIB_STPCPY@
GL_GNULIB_STPNCPY = @GL_GNULIB_STPNCPY@
GL_GNULIB_STRCASESTR = @GL_GNULIB_STRCASESTR@
GL_GNULIB_STRCHRNUL = @GL_GNULIB_STRCHRNUL@
GL_GNULIB_STRDUP = @GL_GNULIB_STRDUP@
GL_GNULIB_STRERROR = @GL_GNULIB_STRERROR@
GL_GNULIB_STRERRORNAME_NP = @GL_GNULIB_STRERRORNAME_NP@
GL_GNULIB_STRERROR_R = @GL_GNULIB_STRERROR_R@
GL_GNULIB_STRFTIME = @GL_GNULIB_STRFTIME@
GL_GNULIB_STRNCAT = @GL_GNULIB_STRNCAT@
GL_GNULIB_STRNDUP = @GL_GNULIB_STRNDUP@
GL_GNULIB_STRNLEN = @GL_GNULIB_STRNLEN@
GL_GNULIB_STRPBRK = @GL_GNULIB_STRPBRK@
GL_GNULIB_STRPTIME = @GL_GNULIB_STRPTIME@
GL_GNULIB_STRSEP = @GL_GNULIB_STRSEP@
GL_GNULIB_STRSIGNAL = @GL_GNULIB_STRSIGNAL@
GL_GNULIB_STRSTR = @GL_GNULIB_STRSTR@
GL_GNULIB_STRTOD = @GL_GNULIB_STRTOD@
GL_GNULIB_STRTOIMAX = @GL_GNULIB_STRTOIMAX@
GL_GNULIB_STRTOK_R = @GL_GNULIB_STRTOK_R@
GL_GNULIB_STRTOL = @GL_GNULIB_STRTOL@
GL_GNULIB_STRTOLD = @GL_GNULIB_STRTOLD@
GL_GNULIB_STRTOLL = @GL_GNULIB_STRTOLL@
GL_GNULIB_STRTOUL = @GL_GNULIB_STRTOUL@
GL_GNULIB_STRTOULL = @GL_GNULIB_STRTOULL@
GL_GNULIB_STRTOUMAX = @GL_GNULIB_STRTOUMAX@
GL_GNULIB_STRVERSCMP = @GL_GNULIB_STRVERSCMP@
GL_GNULIB_SYMLINK = @GL_GNULIB_SYMLINK@
GL_GNULIB_SYMLINKAT = @GL_GNULIB_SYMLINKAT@
GL_GNULIB_SYSTEM_POSIX = @GL_GNULIB_SYSTEM_POSIX@
GL_GNULIB_TIMEGM = @GL_GNULIB_TIMEGM@
GL_GNULIB_TIMESPEC_GET = @GL_GNULIB_TIMESPEC_GET@
GL_GNULIB_TIMESPEC_GETRES = @GL_GNULIB_TIMESPEC_GETRES@
GL_GNULIB_TIME_R = @GL_GNULIB_TIME_R@
GL_GNULIB_TIME_RZ = @GL_GNULIB_TIME_RZ@
GL_GNULIB_TMPFILE = @GL_GNULIB_TMPFILE@
GL_GNULIB_TRUNCATE = @GL_GNULIB_TRUNCATE@
GL_GNULIB_TTYNAME_R = @GL_GNULIB_TTYNAME_R@
GL_GNULIB_TZSET = @GL_GNULIB_TZSET@
GL_GNULIB_UNISTD_H_GETOPT = @GL_GNULIB_UNISTD_H_GETOPT@
GL_GNULIB_UNISTD_H_NONBLOCKING = @GL_GNULIB_UNISTD_H_NONBLOCKING@
GL_GNULIB_UNISTD_H_SIGPIPE = @GL_GNULIB_UNISTD_H_SIGPIPE@
GL_GNULIB_UNLINK = @GL_GNULIB_UNLINK@
GL_GNULIB_UNLINKAT = @GL_GNULIB_UNLINKAT@
GL_GNULIB_UNLOCKPT = @GL_GNULIB_UNLOCKPT@
GL_GNULIB_UNSETENV = @GL_GNULIB_UNSETENV@
GL_GNULIB_USLEEP = @GL_GNULIB_USLEEP@
GL_GNULIB_UTIMENSAT = @GL_GNULIB_UTIMENSAT@
GL_GNULIB_VASPRINTF = @GL_GNULIB_VASPRINTF@
GL_GNULIB_VDPRINTF = @GL_GNULIB_VDPRINTF@
GL_GNULIB_VFPRINTF = @GL_GNULIB_VFPRINTF@
GL_GNULIB_VFPRINTF_POSIX = @GL_GNULIB_VFPRINTF_POSIX@
GL_GNULIB_VFSCANF = @GL_GNULIB_VFSCANF@
GL_GNULIB_VPRINTF = @GL_GNULIB_VPRINTF@
GL_GNULIB_VPRINTF_POSIX = @GL_GNULIB_VPRINTF_POSIX@
GL_GNULIB_VSCANF = @GL_GNULIB_VSCANF@
GL_GNULIB_VSNPRINTF = @GL_GNULIB_VSNPRINTF@
GL_GNULIB_VSPRINTF_POSIX = @GL_GNULIB_VSPRINTF_POSIX@
GL_GNULIB_WCPCPY = @GL_GNULIB_WCPCPY@
GL_GNULIB_WCPNCPY = @GL_GNULIB_WCPNCPY@
GL_GNULIB_WCRTOMB = @GL_GNULIB_WCRTOMB@
GL_GNULIB_WCSCASECMP = @GL_GNULIB_WCSCASECMP@
GL_GNULIB_WCSCAT = @GL_GNULIB_WCSCAT@
GL_GNULIB_WCSCHR = @GL_GNULIB_WCSCHR@
GL_GNULIB_WCSCMP = @GL_GNULIB_WCSCMP@
GL_GNULIB_WCSCOLL = @GL_GNULIB_WCSCOLL@
GL_GNULIB_WCSCPY = @GL_GNULIB_WCSCPY@
GL_GNULIB_WCSCSPN = @GL_GNULIB_WCSCSPN@
GL_GNULIB_WCSDUP = @GL_GNULIB_WCSDUP@
GL_GNULIB_WCSFTIME = @GL_GNULIB_WCSFTIME@
GL_GNULIB_WCSLEN = @GL_GNULIB_WCSLEN@
GL_GNULIB_WCSNCASECMP = @GL_GNULIB_WCSNCASECMP@
GL_GNULIB_WCSNCAT = @GL_GNULIB_WCSNCAT@
GL_GNULIB_WCSNCMP = @GL_GNULIB_WCSNCMP@
GL_GNULIB_WCSNCPY = @GL_GNULIB_WCSNCPY@
GL_GNULIB_WCSNLEN = @GL_GNULIB_WCSNLEN@
GL_GNULIB_WCSNRTOMBS = @GL_GNULIB_WCSNRTOMBS@
GL_GNULIB_WCSPBRK = @GL_GNULIB_WCSPBRK@
GL_GNULIB_WCSRCHR = @GL_GNULIB_WCSRCHR@
GL_GNULIB_WCSRTOMBS = @GL_GNULIB_WCSRTOMBS@
GL_GNULIB_WCSSPN = @GL_GNULIB_WCSSPN@
GL_GNULIB_WCSSTR = @GL_GNULIB_WCSSTR@
GL_GNULIB_WCSTOK = @GL_GNULIB_WCSTOK@
GL_GNULIB_WCSWIDTH = @GL_GNULIB_WCSWIDTH@
GL_GNULIB_WCSXFRM = @GL_GNULIB_WCSXFRM@
GL_GNULIB_WCTOB = @GL_GNULIB_WCTOB@
GL_GNULIB_WCTOMB = @GL_GNULIB_WCTOMB@
GL_GNULIB_WCWIDTH = @GL_GNULIB_WCWIDTH@
GL_GNULIB_WMEMCHR = @GL_GNULIB_WMEMCHR@
GL_GNULIB_WMEMCMP = @GL_GNULIB_WMEMCMP@
GL_GNULIB_WMEMCPY = @GL_GNULIB_WMEMCPY@
GL_GNULIB_WMEMMOVE = @GL_GNULIB_WMEMMOVE@
GL_GNULIB_WMEMPCPY = @GL_GNULIB_WMEMPCPY@
GL_GNULIB_WMEMSET = @GL_GNULIB_WMEMSET@
GL_GNULIB_WRITE = @GL_GNULIB_WRITE@
GL_GNULIB__EXIT = @GL_GNULIB__EXIT@
GNULIBHEADERS_OVERRIDE_WINT_T = @GNULIBHEADERS_OVERRIDE_WINT_T@
GNULIB_GETTIMEOFDAY = @GNULIB_GETTIMEOFDAY@
GREP = @GREP@
HAVE_ALIGNED_ALLOC = @HAVE_ALIGNED_ALLOC@
HAVE_ALLOCA_H = @HAVE_ALLOCA_H@
HAVE_ATOLL = @HAVE_ATOLL@
HAVE_BTOWC = @HAVE_BTOWC@
HAVE_C99_STDINT_H = @HAVE_C99_STDINT_H@
HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
HAVE_CHOWN = @HAVE_CHOWN@
HAVE_COPY_FILE_RANGE = @HAVE_COPY_FILE_RANGE@
HAVE_CRTDEFS_H = @HAVE_CRTDEFS_H@
HAVE_DECL_ECVT = @HAVE_DECL_ECVT@
HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
HAVE_DECL_EXECVPE = @HAVE_DECL_EXECVPE@
HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
HAVE_DECL_FCLOSEALL = @HAVE_DECL_FCLOSEALL@
HAVE_DECL_FCVT = @HAVE_DECL_FCVT@
HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
HAVE_DECL_FPURGE = @HAVE_DECL_FPURGE@
HAVE_DECL_FSEEKO = @HAVE_DECL_FSEEKO@
HAVE_DECL_FTELLO = @HAVE_DECL_FTELLO@
HAVE_DECL_GCVT = @HAVE_DECL_GCVT@
HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
HAVE_DECL_GETLOGIN = @HAVE_DECL_GETLOGIN@
HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
HAVE_DECL_INITSTATE = @HAVE_DECL_INITSTATE@
HAVE_DECL_LOCALTIME_R = @HAVE_DECL_LOCALTIME_R@
HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
HAVE_DECL_SETSTATE = @HAVE_DECL_SETSTATE@
HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
HAVE_DECL_TRUNCATE = @HAVE_DECL_TRUNCATE@
HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
HAVE_DECL_WCSDUP = @HAVE_DECL_WCSDUP@
HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
HAVE_DPRINTF = @HAVE_DPRINTF@
HAVE_DUP3 = @HAVE_DUP3@
HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
HAVE_EXECVPE = @HAVE_EXECVPE@
HAVE_EXPLICIT_BZERO = @HAVE_EXPLICIT_BZERO@
HAVE_FACCESSAT = @HAVE_FACCESSAT@
HAVE_FCHDIR = @HAVE_FCHDIR@
HAVE_FCHMODAT = @HAVE_FCHMODAT@
HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
HAVE_FCNTL = @HAVE_FCNTL@
HAVE_FDATASYNC = @HAVE_FDATASYNC@
HAVE_FEATURES_H = @HAVE_FEATURES_H@
HAVE_FFS = @HAVE_FFS@
HAVE_FFSL = @HAVE_FFSL@
HAVE_FFSLL = @HAVE_FFSLL@
HAVE_FSEEKO = @HAVE_FSEEKO@
HAVE_FSTATAT = @HAVE_FSTATAT@
HAVE_FSYNC = @HAVE_FSYNC@
HAVE_FTELLO = @HAVE_FTELLO@
HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
HAVE_FUTIMENS = @HAVE_FUTIMENS@
HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
HAVE_GETENTROPY = @HAVE_GETENTROPY@
HAVE_GETGROUPS = @HAVE_GETGROUPS@
HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
HAVE_GETLOGIN = @HAVE_GETLOGIN@
HAVE_GETOPT_H = @HAVE_GETOPT_H@
HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
HAVE_GETPASS = @HAVE_GETPASS@
HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
HAVE_GETUMASK = @HAVE_GETUMASK@
HAVE_GRANTPT = @HAVE_GRANTPT@
HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
HAVE_IMAXDIV_T = @HAVE_IMAXDIV_T@
HAVE_INITSTATE = @HAVE_INITSTATE@
HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
HAVE_LCHMOD = @HAVE_LCHMOD@
HAVE_LCHOWN = @HAVE_LCHOWN@
HAVE_LINK = @HAVE_LINK@
HAVE_LINKAT = @HAVE_LINKAT@
HAVE_LSTAT = @HAVE_LSTAT@
HAVE_MAX_ALIGN_T = @HAVE_MAX_ALIGN_T@
HAVE_MBRLEN = @HAVE_MBRLEN@
HAVE_MBRTOWC = @HAVE_MBRTOWC@
HAVE_MBSINIT = @HAVE_MBSINIT@
HAVE_MBSLEN = @HAVE_MBSLEN@
HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
HAVE_MBTOWC = @HAVE_MBTOWC@
HAVE_MEMPCPY = @HAVE_MEMPCPY@
HAVE_MKDIRAT = @HAVE_MKDIRAT@
HAVE_MKDTEMP = @HAVE_MKDTEMP@
HAVE_MKFIFO = @HAVE_MKFIFO@
HAVE_MKFIFOAT = @HAVE_MKFIFOAT@
HAVE_MKNOD = @HAVE_MKNOD@
HAVE_MKNODAT = @HAVE_MKNODAT@
HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
HAVE_MKSTEMP = @HAVE_MKSTEMP@
HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
HAVE_NANOSLEEP = @HAVE_NANOSLEEP@
HAVE_OPENAT = @HAVE_OPENAT@
HAVE_OS_H = @HAVE_OS_H@
HAVE_PCLOSE = @HAVE_PCLOSE@
HAVE_PIPE = @HAVE_PIPE@
HAVE_PIPE2 = @HAVE_PIPE2@
HAVE_POPEN = @HAVE_POPEN@
HAVE_POSIX_MEMALIGN = @HAVE_POSIX_MEMALIGN@
HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
HAVE_PREAD = @HAVE_PREAD@
HAVE_PTSNAME = @HAVE_PTSNAME@
HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
HAVE_PWRITE = @HAVE_PWRITE@
HAVE_QSORT_R = @HAVE_QSORT_R@
HAVE_RANDOM = @HAVE_RANDOM@
HAVE_RANDOM_H = @HAVE_RANDOM_H@
HAVE_RANDOM_R = @HAVE_RANDOM_R@
HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
HAVE_READLINK = @HAVE_READLINK@
HAVE_READLINKAT = @HAVE_READLINKAT@
HAVE_REALLOCARRAY = @HAVE_REALLOCARRAY@
HAVE_REALPATH = @HAVE_REALPATH@
HAVE_RENAMEAT = @HAVE_RENAMEAT@
HAVE_RPMATCH = @HAVE_RPMATCH@
HAVE_SECURE_GETENV = @HAVE_SECURE_GETENV@
HAVE_SETENV = @HAVE_SETENV@
HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
HAVE_SETSTATE = @HAVE_SETSTATE@
HAVE_SIGABBREV_NP = @HAVE_SIGABBREV_NP@
HAVE_SIGDESCR_NP = @HAVE_SIGDESCR_NP@
HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
HAVE_SLEEP = @HAVE_SLEEP@
HAVE_STDINT_H = @HAVE_STDINT_H@
HAVE_STPCPY = @HAVE_STPCPY@
HAVE_STPNCPY = @HAVE_STPNCPY@
HAVE_STRCASECMP = @HAVE_STRCASECMP@
HAVE_STRCASESTR = @HAVE_STRCASESTR@
HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
HAVE_STRERRORNAME_NP = @HAVE_STRERRORNAME_NP@
HAVE_STRINGS_H = @HAVE_STRINGS_H@
HAVE_STRPBRK = @HAVE_STRPBRK@
HAVE_STRPTIME = @HAVE_STRPTIME@
HAVE_STRSEP = @HAVE_STRSEP@
HAVE_STRTOD = @HAVE_STRTOD@
HAVE_STRTOL = @HAVE_STRTOL@
HAVE_STRTOLD = @HAVE_STRTOLD@
HAVE_STRTOLL = @HAVE_STRTOLL@
HAVE_STRTOUL = @HAVE_STRTOUL@
HAVE_STRTOULL = @HAVE_STRTOULL@
HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
HAVE_SYMLINK = @HAVE_SYMLINK@
HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
HAVE_SYSEXITS_H = @HAVE_SYSEXITS_H@
HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
HAVE_SYS_CDEFS_H = @HAVE_SYS_CDEFS_H@
HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
HAVE_TIMEGM = @HAVE_TIMEGM@
HAVE_TIMESPEC_GET = @HAVE_TIMESPEC_GET@
HAVE_TIMESPEC_GETRES = @HAVE_TIMESPEC_GETRES@
HAVE_TIMEZONE_T = @HAVE_TIMEZONE_T@
HAVE_UNISTD_H = @HAVE_UNISTD_H@
HAVE_UNLINKAT = @HAVE_UNLINKAT@
HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
HAVE_USLEEP = @HAVE_USLEEP@
HAVE_UTIMENSAT = @HAVE_UTIMENSAT@
HAVE_VASPRINTF = @HAVE_VASPRINTF@
HAVE_VDPRINTF = @HAVE_VDPRINTF@
HAVE_WCHAR_H = @HAVE_WCHAR_H@
HAVE_WCHAR_T = @HAVE_WCHAR_T@
HAVE_WCPCPY = @HAVE_WCPCPY@
HAVE_WCPNCPY = @HAVE_WCPNCPY@
HAVE_WCRTOMB = @HAVE_WCRTOMB@
HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
HAVE_WCSCAT = @HAVE_WCSCAT@
HAVE_WCSCHR = @HAVE_WCSCHR@
HAVE_WCSCMP = @HAVE_WCSCMP@
HAVE_WCSCOLL = @HAVE_WCSCOLL@
HAVE_WCSCPY = @HAVE_WCSCPY@
HAVE_WCSCSPN = @HAVE_WCSCSPN@
HAVE_WCSDUP = @HAVE_WCSDUP@
HAVE_WCSFTIME = @HAVE_WCSFTIME@
HAVE_WCSLEN = @HAVE_WCSLEN@
HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
HAVE_WCSNCAT = @HAVE_WCSNCAT@
HAVE_WCSNCMP = @HAVE_WCSNCMP@
HAVE_WCSNCPY = @HAVE_WCSNCPY@
HAVE_WCSNLEN = @HAVE_WCSNLEN@
HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
HAVE_WCSPBRK = @HAVE_WCSPBRK@
HAVE_WCSRCHR = @HAVE_WCSRCHR@
HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
HAVE_WCSSPN = @HAVE_WCSSPN@
HAVE_WCSSTR = @HAVE_WCSSTR@
HAVE_WCSTOK = @HAVE_WCSTOK@
HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
HAVE_WCSXFRM = @HAVE_WCSXFRM@
HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
HAVE_WINT_T = @HAVE_WINT_T@
HAVE_WMEMCHR = @HAVE_WMEMCHR@
HAVE_WMEMCMP = @HAVE_WMEMCMP@
HAVE_WMEMCPY = @HAVE_WMEMCPY@
HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
HAVE_WMEMPCPY = @HAVE_WMEMPCPY@
HAVE_WMEMSET = @HAVE_WMEMSET@
HAVE__BOOL = @HAVE__BOOL@
HAVE__EXIT = @HAVE__EXIT@
IGNORE_UNUSED_LIBRARIES_CFLAGS = @IGNORE_UNUSED_LIBRARIES_CFLAGS@
INCLUDE_NEXT = @INCLUDE_NEXT@
INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@
INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@
LDFLAGS = @LDFLAGS@
LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@
LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIMITS_H = @LIMITS_H@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
NEXT_AS_FIRST_DIRECTIVE_FCNTL_H = @NEXT_AS_FIRST_DIRECTIVE_FCNTL_H@
NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = @NEXT_AS_FIRST_DIRECTIVE_FLOAT_H@
NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H = @NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H@
NEXT_AS_FIRST_DIRECTIVE_LIMITS_H = @NEXT_AS_FIRST_DIRECTIVE_LIMITS_H@
NEXT_AS_FIRST_DIRECTIVE_STDARG_H = @NEXT_AS_FIRST_DIRECTIVE_STDARG_H@
NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@
NEXT_AS_FIRST_DIRECTIVE_STDIO_H = @NEXT_AS_FIRST_DIRECTIVE_STDIO_H@
NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
NEXT_AS_FIRST_DIRECTIVE_STRINGS_H = @NEXT_AS_FIRST_DIRECTIVE_STRINGS_H@
NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H = @NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H@
NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H@
NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H@
NEXT_AS_FIRST_DIRECTIVE_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_TIME_H@
NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
NEXT_ERRNO_H = @NEXT_ERRNO_H@
NEXT_FCNTL_H = @NEXT_FCNTL_H@
NEXT_FLOAT_H = @NEXT_FLOAT_H@
NEXT_GETOPT_H = @NEXT_GETOPT_H@
NEXT_INTTYPES_H = @NEXT_INTTYPES_H@
NEXT_LIMITS_H = @NEXT_LIMITS_H@
NEXT_STDARG_H = @NEXT_STDARG_H@
NEXT_STDDEF_H = @NEXT_STDDEF_H@
NEXT_STDINT_H = @NEXT_STDINT_H@
NEXT_STDIO_H = @NEXT_STDIO_H@
NEXT_STDLIB_H = @NEXT_STDLIB_H@
NEXT_STRINGS_H = @NEXT_STRINGS_H@
NEXT_STRING_H = @NEXT_STRING_H@
NEXT_SYSEXITS_H = @NEXT_SYSEXITS_H@
NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
NEXT_SYS_TYPES_H = @NEXT_SYS_TYPES_H@
NEXT_TIME_H = @NEXT_TIME_H@
NEXT_UNISTD_H = @NEXT_UNISTD_H@
NEXT_WCHAR_H = @NEXT_WCHAR_H@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
PRIPTR_PREFIX = @PRIPTR_PREFIX@
PTHREAD_H_DEFINES_STRUCT_TIMESPEC = @PTHREAD_H_DEFINES_STRUCT_TIMESPEC@
PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
RANLIB = @RANLIB@
REPLACE_ACCESS = @REPLACE_ACCESS@
REPLACE_ALIGNED_ALLOC = @REPLACE_ALIGNED_ALLOC@
REPLACE_BTOWC = @REPLACE_BTOWC@
REPLACE_CALLOC_FOR_CALLOC_GNU = @REPLACE_CALLOC_FOR_CALLOC_GNU@
REPLACE_CALLOC_FOR_CALLOC_POSIX = @REPLACE_CALLOC_FOR_CALLOC_POSIX@
REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
REPLACE_CHOWN = @REPLACE_CHOWN@
REPLACE_CLOSE = @REPLACE_CLOSE@
REPLACE_COPY_FILE_RANGE = @REPLACE_COPY_FILE_RANGE@
REPLACE_CREAT = @REPLACE_CREAT@
REPLACE_CTIME = @REPLACE_CTIME@
REPLACE_DPRINTF = @REPLACE_DPRINTF@
REPLACE_DUP = @REPLACE_DUP@
REPLACE_DUP2 = @REPLACE_DUP2@
REPLACE_EXECL = @REPLACE_EXECL@
REPLACE_EXECLE = @REPLACE_EXECLE@
REPLACE_EXECLP = @REPLACE_EXECLP@
REPLACE_EXECV = @REPLACE_EXECV@
REPLACE_EXECVE = @REPLACE_EXECVE@
REPLACE_EXECVP = @REPLACE_EXECVP@
REPLACE_EXECVPE = @REPLACE_EXECVPE@
REPLACE_FACCESSAT = @REPLACE_FACCESSAT@
REPLACE_FCHMODAT = @REPLACE_FCHMODAT@
REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
REPLACE_FCLOSE = @REPLACE_FCLOSE@
REPLACE_FCNTL = @REPLACE_FCNTL@
REPLACE_FDOPEN = @REPLACE_FDOPEN@
REPLACE_FFLUSH = @REPLACE_FFLUSH@
REPLACE_FFSLL = @REPLACE_FFSLL@
REPLACE_FOPEN = @REPLACE_FOPEN@
REPLACE_FOPEN_FOR_FOPEN_GNU = @REPLACE_FOPEN_FOR_FOPEN_GNU@
REPLACE_FPRINTF = @REPLACE_FPRINTF@
REPLACE_FPURGE = @REPLACE_FPURGE@
REPLACE_FREE = @REPLACE_FREE@
REPLACE_FREOPEN = @REPLACE_FREOPEN@
REPLACE_FSEEK = @REPLACE_FSEEK@
REPLACE_FSEEKO = @REPLACE_FSEEKO@
REPLACE_FSTAT = @REPLACE_FSTAT@
REPLACE_FSTATAT = @REPLACE_FSTATAT@
REPLACE_FTELL = @REPLACE_FTELL@
REPLACE_FTELLO = @REPLACE_FTELLO@
REPLACE_FTRUNCATE = @REPLACE_FTRUNCATE@
REPLACE_FUTIMENS = @REPLACE_FUTIMENS@
REPLACE_GETCWD = @REPLACE_GETCWD@
REPLACE_GETDELIM = @REPLACE_GETDELIM@
REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
REPLACE_GETDTABLESIZE = @REPLACE_GETDTABLESIZE@
REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
REPLACE_GETLINE = @REPLACE_GETLINE@
REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
REPLACE_GETPASS = @REPLACE_GETPASS@
REPLACE_GETPASS_FOR_GETPASS_GNU = @REPLACE_GETPASS_FOR_GETPASS_GNU@
REPLACE_GMTIME = @REPLACE_GMTIME@
REPLACE_INITSTATE = @REPLACE_INITSTATE@
REPLACE_ISATTY = @REPLACE_ISATTY@
REPLACE_ITOLD = @REPLACE_ITOLD@
REPLACE_LCHOWN = @REPLACE_LCHOWN@
REPLACE_LINK = @REPLACE_LINK@
REPLACE_LINKAT = @REPLACE_LINKAT@
REPLACE_LOCALTIME = @REPLACE_LOCALTIME@
REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
REPLACE_LSEEK = @REPLACE_LSEEK@
REPLACE_LSTAT = @REPLACE_LSTAT@
REPLACE_MALLOC_FOR_MALLOC_GNU = @REPLACE_MALLOC_FOR_MALLOC_GNU@
REPLACE_MALLOC_FOR_MALLOC_POSIX = @REPLACE_MALLOC_FOR_MALLOC_POSIX@
REPLACE_MBRLEN = @REPLACE_MBRLEN@
REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
REPLACE_MBSINIT = @REPLACE_MBSINIT@
REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
REPLACE_MBTOWC = @REPLACE_MBTOWC@
REPLACE_MEMCHR = @REPLACE_MEMCHR@
REPLACE_MEMMEM = @REPLACE_MEMMEM@
REPLACE_MKDIR = @REPLACE_MKDIR@
REPLACE_MKFIFO = @REPLACE_MKFIFO@
REPLACE_MKFIFOAT = @REPLACE_MKFIFOAT@
REPLACE_MKNOD = @REPLACE_MKNOD@
REPLACE_MKNODAT = @REPLACE_MKNODAT@
REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
REPLACE_MKTIME = @REPLACE_MKTIME@
REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
REPLACE_NULL = @REPLACE_NULL@
REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
REPLACE_OPEN = @REPLACE_OPEN@
REPLACE_OPENAT = @REPLACE_OPENAT@
REPLACE_PERROR = @REPLACE_PERROR@
REPLACE_POPEN = @REPLACE_POPEN@
REPLACE_POSIX_MEMALIGN = @REPLACE_POSIX_MEMALIGN@
REPLACE_PREAD = @REPLACE_PREAD@
REPLACE_PRINTF = @REPLACE_PRINTF@
REPLACE_PTSNAME = @REPLACE_PTSNAME@
REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
REPLACE_PUTENV = @REPLACE_PUTENV@
REPLACE_PWRITE = @REPLACE_PWRITE@
REPLACE_QSORT_R = @REPLACE_QSORT_R@
REPLACE_RANDOM = @REPLACE_RANDOM@
REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
REPLACE_READ = @REPLACE_READ@
REPLACE_READLINK = @REPLACE_READLINK@
REPLACE_READLINKAT = @REPLACE_READLINKAT@
REPLACE_REALLOCARRAY = @REPLACE_REALLOCARRAY@
REPLACE_REALLOC_FOR_REALLOC_GNU = @REPLACE_REALLOC_FOR_REALLOC_GNU@
REPLACE_REALLOC_FOR_REALLOC_POSIX = @REPLACE_REALLOC_FOR_REALLOC_POSIX@
REPLACE_REALPATH = @REPLACE_REALPATH@
REPLACE_REMOVE = @REPLACE_REMOVE@
REPLACE_RENAME = @REPLACE_RENAME@
REPLACE_RENAMEAT = @REPLACE_RENAMEAT@
REPLACE_RMDIR = @REPLACE_RMDIR@
REPLACE_SETENV = @REPLACE_SETENV@
REPLACE_SETSTATE = @REPLACE_SETSTATE@
REPLACE_SLEEP = @REPLACE_SLEEP@
REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
REPLACE_SPRINTF = @REPLACE_SPRINTF@
REPLACE_STAT = @REPLACE_STAT@
REPLACE_STDIO_READ_FUNCS = @REPLACE_STDIO_READ_FUNCS@
REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
REPLACE_STPNCPY = @REPLACE_STPNCPY@
REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
REPLACE_STRDUP = @REPLACE_STRDUP@
REPLACE_STRERROR = @REPLACE_STRERROR@
REPLACE_STRERRORNAME_NP = @REPLACE_STRERRORNAME_NP@
REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
REPLACE_STRFTIME = @REPLACE_STRFTIME@
REPLACE_STRNCAT = @REPLACE_STRNCAT@
REPLACE_STRNDUP = @REPLACE_STRNDUP@
REPLACE_STRNLEN = @REPLACE_STRNLEN@
REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
REPLACE_STRSTR = @REPLACE_STRSTR@
REPLACE_STRTOD = @REPLACE_STRTOD@
REPLACE_STRTOIMAX = @REPLACE_STRTOIMAX@
REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
REPLACE_STRTOL = @REPLACE_STRTOL@
REPLACE_STRTOLD = @REPLACE_STRTOLD@
REPLACE_STRTOLL = @REPLACE_STRTOLL@
REPLACE_STRTOUL = @REPLACE_STRTOUL@
REPLACE_STRTOULL = @REPLACE_STRTOULL@
REPLACE_STRTOUMAX = @REPLACE_STRTOUMAX@
REPLACE_SYMLINK = @REPLACE_SYMLINK@
REPLACE_SYMLINKAT = @REPLACE_SYMLINKAT@
REPLACE_TIMEGM = @REPLACE_TIMEGM@
REPLACE_TMPFILE = @REPLACE_TMPFILE@
REPLACE_TRUNCATE = @REPLACE_TRUNCATE@
REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
REPLACE_TZSET = @REPLACE_TZSET@
REPLACE_UNLINK = @REPLACE_UNLINK@
REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
REPLACE_UNSETENV = @REPLACE_UNSETENV@
REPLACE_USLEEP = @REPLACE_USLEEP@
REPLACE_UTIMENSAT = @REPLACE_UTIMENSAT@
REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
REPLACE_VPRINTF = @REPLACE_VPRINTF@
REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
REPLACE_WCSFTIME = @REPLACE_WCSFTIME@
REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
REPLACE_WCSTOK = @REPLACE_WCSTOK@
REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
REPLACE_WCTOB = @REPLACE_WCTOB@
REPLACE_WCTOMB = @REPLACE_WCTOMB@
REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
REPLACE_WRITE = @REPLACE_WRITE@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
STDALIGN_H = @STDALIGN_H@
STDARG_H = @STDARG_H@
STDBOOL_H = @STDBOOL_H@
STDDEF_H = @STDDEF_H@
STDINT_H = @STDINT_H@
STRIP = @STRIP@
SYSEXITS_H = @SYSEXITS_H@
SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
TIME_H_DEFINES_TIME_UTC = @TIME_H_DEFINES_TIME_UTC@
UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@
UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@
UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
UNISTD_H_DEFINES_STRUCT_TIMESPEC = @UNISTD_H_DEFINES_STRUCT_TIMESPEC@
UNISTD_H_HAVE_SYS_RANDOM_H = @UNISTD_H_HAVE_SYS_RANDOM_H@
UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
WINDOWS_64_BIT_OFF_T = @WINDOWS_64_BIT_OFF_T@
WINDOWS_64_BIT_ST_SIZE = @WINDOWS_64_BIT_ST_SIZE@
WINDOWS_STAT_INODES = @WINDOWS_STAT_INODES@
WINDOWS_STAT_TIMESPEC = @WINDOWS_STAT_TIMESPEC@
WINT_T_SUFFIX = @WINT_T_SUFFIX@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
admindir = @admindir@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gl_LIBOBJDEPS = @gl_LIBOBJDEPS@
gl_LIBOBJS = @gl_LIBOBJS@
gl_LTLIBOBJS = @gl_LTLIBOBJS@
gltests_LIBOBJDEPS = @gltests_LIBOBJDEPS@
gltests_LIBOBJS = @gltests_LIBOBJS@
gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
gltests_WITNESS = @gltests_WITNESS@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
importdir = @importdir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libpipeline_CFLAGS = @libpipeline_CFLAGS@
libpipeline_LIBS = @libpipeline_LIBS@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
procdir = @procdir@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
systemdsystemunitdir = @systemdsystemunitdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = gl/lib src doc man init
# These macro files are imported by gnulib-tool, but at present not used.
# We include them in the distribution anyway for maximum consistency.
EXTRA_DIST = .gitignore ChangeLog-2013 bootstrap bootstrap.conf \
gl/m4/math_h.m4
ACLOCAL_AMFLAGS = -I gl/m4 -I m4
gen_start_date = 2013-12-28
DISTCHECK_CONFIGURE_FLAGS = \
--with-systemdsystemunitdir=\$${prefix}/$(systemdsystemunitdir)
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
dist-zip dist-zstd distcheck distclean distclean-generic \
distclean-hdr distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
tags-am uninstall uninstall-am
.PRECIOUS: Makefile
dist-hook: gen-ChangeLog
.PHONY: gen-ChangeLog
gen-ChangeLog:
$(AM_V_GEN)if test -d .git; then \
$(top_srcdir)/build-aux/gitlog-to-changelog \
--format='%s%n%n%b%n' \
--since="$(gen_start_date)" > $(distdir)/cl-t; \
rm -f $(distdir)/ChangeLog; \
mv $(distdir)/cl-t $(distdir)/ChangeLog; \
fi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
binfmt-support-2.2.2/NEWS.md 0000666 0000000 0000000 00000007261 14246241610 012505 0000000 0000000 binfmt-support 2.2.2 (3 June 2022)
==================================
* Move Git repository to GitLab
(https://gitlab.com/cjwatson/binfmt-support).
* Fix tests to work with Python 3.
* Add some hardening options to the `systemd` service.
* Run `binfmt-support.service` after `systemd-binfmt.service`. Thanks to
Michael Biebl.
binfmt-support 2.2.1 (17 April 2020)
====================================
* Fix wrongly-documented `fix_binary` format entry. Thanks to Helmut
Grohne.
* Ensure that standard I/O streams are open on program startup.
* Fix build with `gcc -fno-common`.
* Improve some internal data structures.
binfmt-support 2.2.0 (24 January 2019)
======================================
* Remove support for the old procfs interface, which has been unused since
Linux 2.4.13 and which caused trouble in environments where we can't use
modprobe. Thanks to Bastian Blank.
* Sort formats by name in the output of `update-binfmts --display`.
* Building binfmt-support now requires Autoconf >= 2.63.
* Add a new `--unimport` action, which is the inverse of `--import`.
* Don't enable formats on import or disable them on unimport unless
`/proc/sys/fs/binfmt_misc` is already mounted. This avoids causing
cleanup problems in chroots.
* `--fix-binary yes` is incompatible with detectors. Warn the user if they
try to use both at once. Thanks to Stefan Agner.
binfmt-support 2.1.8 (22 August 2017)
=====================================
* Add `--disable-upstart` and `--disable-systemd` configure options.
binfmt-support 2.1.7 (9 July 2017)
==================================
* Add an `update-binfmts --fix-binary yes` option, mapping to the 'F' flag
in Linux `binfmt_misc`'s flags field. Thanks to Dan Nicholson.
binfmt-support 2.1.6 (21 February 2016)
=======================================
* Always install database entry even if `/proc` entry exists. Thanks to
Raphaƫl Hertzog.
* Implement a stop action for the systemd service. Thanks to Michael
Biebl.
binfmt-support 2.1.5 (24 August 2014)
=====================================
* Add an `update-binfmts --preserve yes` option, mapping to the 'P' flag in
Linux `binfmt_misc`'s flags field. Thanks to Riku Voipio.
binfmt-support 2.1.4 (30 March 2014)
====================================
* Fix test suite when `libexecdir` is not `/usr/lib`.
* Fix `--disable-sysvinit` and `--disable-openrc` configure options.
* Make the Upstart job a service with pre-start and post-stop stanzas
rather than a task, as a task with a corresponding init script prevents
startpar from continuing the boot sequence past that init script (because
the job is considered "stopped"). Thanks to Cameron Norman.
binfmt-support 2.1.3 (8 February 2014)
======================================
* Fix reversed logic in OpenRC script.
binfmt-support 2.1.2 (7 February 2014)
======================================
* Stop hardcoding Debian defaults for various directories.
* Ensure all necessary directories exist after installation.
* Embed full path to `update-binfmts` into the sample sysvinit script and
the Upstart job file (the systemd unit file already did this), to save a
path lookup.
* Add OpenRC support.
* Add mutually-exclusive `--enable-sysvinit` and `--enable-openrc`
configure options, which cause the sysvinit or OpenRC script respectively
to be installed to `$sysconfdir/init.d/binfmt-support`.
binfmt-support 2.1.1 (29 December 2013)
=======================================
* Fix installation of systemd unit files.
binfmt-support 2.1.0 (29 December 2013)
=======================================
* First separate upstream release, based on previous versions in Debian.
* Add a systemd unit file.
binfmt-support-2.2.2/README.md 0000666 0000000 0000000 00000002626 14246241610 012666 0000000 0000000 # binfmt-support, tools for managing executable binary formats
Git repository: https://gitlab.com/cjwatson/binfmt-support
The `binfmt_misc` kernel module, contained in versions 2.1.43 and later of
the Linux kernel, allows system administrators to register interpreters for
various binary formats based on a magic number or their file extension, and
cause the appropriate interpreter to be invoked whenever a matching file is
executed. Think of it as a more flexible version of the `#!` executable
interpreter mechanism.
`binfmt-support` provides an `update-binfmts` script with which package
maintainers can register interpreters to be used with this module without
having to worry about writing their own init scripts, and which sysadmins
can use for a higher-level interface to this module.
It also supports a mechanism for extending the range of binary formats among
which the kernel can distinguish with the aid of a userspace helper, called
a detector.
## Installation
If you need to install `binfmt-support` starting from source code, then you
will need these separate packages installed first, as well as a C99
compiler:
* [pkg-config](https://www.freedesktop.org/wiki/Software/pkg-config)
* [libpipeline](https://gitlab.com/cjwatson/libpipeline)
See the INSTALL file for general installation instructions.
## Bug reporting
You can [report bugs on
GitLab](https://gitlab.com/cjwatson/binfmt-support/-/issues).
binfmt-support-2.2.2/aclocal.m4 0000644 0000000 0000000 00000162304 14246242214 013244 0000000 0000000 # generated automatically by aclocal 1.16.5 -*- Autoconf -*-
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],,
[m4_warning([this file was generated for autoconf 2.71.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
# serial 12 (pkg-config-0.29.2)
dnl Copyright Ā© 2004 Scott James Remnant .
dnl Copyright Ā© 2012-2015 Dan Nicholson
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful, but
dnl WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
dnl 02111-1307, USA.
dnl
dnl As a special exception to the GNU General Public License, if you
dnl distribute this file as part of a program that contains a
dnl configuration script generated by Autoconf, you may include it under
dnl the same distribution terms that you use for the rest of that
dnl program.
dnl PKG_PREREQ(MIN-VERSION)
dnl -----------------------
dnl Since: 0.29
dnl
dnl Verify that the version of the pkg-config macros are at least
dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
dnl installed version of pkg-config, this checks the developer's version
dnl of pkg.m4 when generating configure.
dnl
dnl To ensure that this macro is defined, also add:
dnl m4_ifndef([PKG_PREREQ],
dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
dnl
dnl See the "Since" comment for each macro you use to see what version
dnl of the macros you require.
m4_defun([PKG_PREREQ],
[m4_define([PKG_MACROS_VERSION], [0.29.2])
m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
[m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
])dnl PKG_PREREQ
dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
dnl ----------------------------------
dnl Since: 0.16
dnl
dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
dnl first found in the path. Checks that the version of pkg-config found
dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
dnl used since that's the first version where most current features of
dnl pkg-config existed.
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
fi
if test -n "$PKG_CONFIG"; then
_pkg_min_version=m4_default([$1], [0.9.0])
AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
PKG_CONFIG=""
fi
fi[]dnl
])dnl PKG_PROG_PKG_CONFIG
dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
dnl -------------------------------------------------------------------
dnl Since: 0.18
dnl
dnl Check to see whether a particular set of modules exists. Similar to
dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
dnl
dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
dnl only at the first occurence in configure.ac, so if the first place
dnl it's called might be skipped (such as if it is within an "if", you
dnl have to call PKG_CHECK_EXISTS manually
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
m4_default([$2], [:])
m4_ifvaln([$3], [else
$3])dnl
fi])
dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
dnl ---------------------------------------------
dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
dnl pkg_failed based on the result.
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
elif test -n "$PKG_CONFIG"; then
PKG_CHECK_EXISTS([$3],
[pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes ],
[pkg_failed=yes])
else
pkg_failed=untried
fi[]dnl
])dnl _PKG_CONFIG
dnl _PKG_SHORT_ERRORS_SUPPORTED
dnl ---------------------------
dnl Internal check to see if pkg-config supports short errors.
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi[]dnl
])dnl _PKG_SHORT_ERRORS_SUPPORTED
dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
dnl [ACTION-IF-NOT-FOUND])
dnl --------------------------------------------------------------
dnl Since: 0.4.0
dnl
dnl Note that if there is a possibility the first call to
dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
pkg_failed=no
AC_MSG_CHECKING([for $2])
_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])
m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
and $1[]_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.])
if test $pkg_failed = yes; then
AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
$1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
else
$1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
m4_default([$4], [AC_MSG_ERROR(
[Package requirements ($2) were not met:
$$1_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
_PKG_TEXT])[]dnl
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
_PKG_TEXT
To get pkg-config, see .])[]dnl
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
AC_MSG_RESULT([yes])
$3
fi[]dnl
])dnl PKG_CHECK_MODULES
dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
dnl [ACTION-IF-NOT-FOUND])
dnl ---------------------------------------------------------------------
dnl Since: 0.29
dnl
dnl Checks for existence of MODULES and gathers its build flags with
dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
dnl and VARIABLE-PREFIX_LIBS from --libs.
dnl
dnl Note that if there is a possibility the first call to
dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
dnl configure.ac.
AC_DEFUN([PKG_CHECK_MODULES_STATIC],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
_save_PKG_CONFIG=$PKG_CONFIG
PKG_CONFIG="$PKG_CONFIG --static"
PKG_CHECK_MODULES($@)
PKG_CONFIG=$_save_PKG_CONFIG[]dnl
])dnl PKG_CHECK_MODULES_STATIC
dnl PKG_INSTALLDIR([DIRECTORY])
dnl -------------------------
dnl Since: 0.27
dnl
dnl Substitutes the variable pkgconfigdir as the location where a module
dnl should install pkg-config .pc files. By default the directory is
dnl $libdir/pkgconfig, but the default can be changed by passing
dnl DIRECTORY. The user can override through the --with-pkgconfigdir
dnl parameter.
AC_DEFUN([PKG_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
m4_pushdef([pkg_description],
[pkg-config installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([pkgconfigdir],
[AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
[with_pkgconfigdir=]pkg_default)
AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
])dnl PKG_INSTALLDIR
dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
dnl --------------------------------
dnl Since: 0.27
dnl
dnl Substitutes the variable noarch_pkgconfigdir as the location where a
dnl module should install arch-independent pkg-config .pc files. By
dnl default the directory is $datadir/pkgconfig, but the default can be
dnl changed by passing DIRECTORY. The user can override through the
dnl --with-noarch-pkgconfigdir parameter.
AC_DEFUN([PKG_NOARCH_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
m4_pushdef([pkg_description],
[pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([noarch-pkgconfigdir],
[AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
[with_noarch_pkgconfigdir=]pkg_default)
AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
])dnl PKG_NOARCH_INSTALLDIR
dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
dnl -------------------------------------------
dnl Since: 0.28
dnl
dnl Retrieves the value of the pkg-config variable for the given module.
AC_DEFUN([PKG_CHECK_VAR],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
_PKG_CONFIG([$1], [variable="][$3]["], [$2])
AS_VAR_COPY([$1], [pkg_cv_][$1])
AS_VAR_IF([$1], [""], [$5], [$4])dnl
])dnl PKG_CHECK_VAR
# Copyright (C) 2002-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.16'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
m4_if([$1], [1.16.5], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too. Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.16.5])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_COND_IF -*- Autoconf -*-
# Copyright (C) 2008-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_COND_IF
# _AM_COND_ELSE
# _AM_COND_ENDIF
# --------------
# These macros are only used for tracing.
m4_define([_AM_COND_IF])
m4_define([_AM_COND_ELSE])
m4_define([_AM_COND_ENDIF])
# AM_COND_IF(COND, [IF-TRUE], [IF-FALSE])
# ---------------------------------------
# If the shell condition COND is true, execute IF-TRUE, otherwise execute
# IF-FALSE. Allow automake to learn about conditional instantiating macros
# (the AC_CONFIG_FOOS).
AC_DEFUN([AM_COND_IF],
[m4_ifndef([_AM_COND_VALUE_$1],
[m4_fatal([$0: no such condition "$1"])])dnl
_AM_COND_IF([$1])dnl
if test -z "$$1_TRUE"; then :
m4_n([$2])[]dnl
m4_ifval([$3],
[_AM_COND_ELSE([$1])dnl
else
$3
])dnl
_AM_COND_ENDIF([$1])dnl
fi[]dnl
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ([2.52])dnl
m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
[$1], [CXX], [depcc="$CXX" am_compiler_list=],
[$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
[$1], [UPC], [depcc="$UPC" am_compiler_list=],
[$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
am__universal=false
m4_case([$1], [CC],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac],
[CXX],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac])
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
[--enable-dependency-tracking],
[do not reject slow dependency extractors])
AS_HELP_STRING(
[--disable-dependency-tracking],
[speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
# TODO: see whether this extra hack can be removed once we start
# requiring Autoconf 2.70 or later.
AS_CASE([$CONFIG_FILES],
[*\'*], [eval set x "$CONFIG_FILES"],
[*], [set x $CONFIG_FILES])
shift
# Used to flag and report bootstrapping failures.
am_rc=0
for am_mf
do
# Strip MF so we end up with the name of the file.
am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile which includes
# dependency-tracking related rules and includes.
# Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
|| continue
am_dirpart=`AS_DIRNAME(["$am_mf"])`
am_filepart=`AS_BASENAME(["$am_mf"])`
AM_RUN_LOG([cd "$am_dirpart" \
&& sed -e '/# am--include-marker/d' "$am_filepart" \
| $MAKE -f - am--depfiles]) || am_rc=$?
done
if test $am_rc -ne 0; then
AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
for automatic dependency tracking. If GNU make was not used, consider
re-running the configure script with MAKE="gmake" (or whatever is
necessary). You can also try re-running configure with the
'--disable-dependency-tracking' option to at least be able to build
the package (albeit without support for automatic dependency tracking).])
fi
AS_UNSET([am_dirpart])
AS_UNSET([am_filepart])
AS_UNSET([am_mf])
AS_UNSET([am_rc])
rm -f conftest-deps.mk
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking is enabled.
# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
# order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])
[_AM_PROG_CC_C_O
])
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.65])dnl
m4_ifdef([_$0_ALREADY_INIT],
[m4_fatal([$0 expanded multiple times
]m4_defn([_$0_ALREADY_INIT]))],
[m4_define([_$0_ALREADY_INIT], m4_expansion_stack)])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
[$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]),
[ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
AM_MISSING_PROG([AUTOCONF], [autoconf])
AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
AM_MISSING_PROG([AUTOHEADER], [autoheader])
AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target (and possibly the TAP driver). The
# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES([CC])],
[m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES([CXX])],
[m4_define([AC_PROG_CXX],
m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES([OBJC])],
[m4_define([AC_PROG_OBJC],
m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
[_AM_DEPENDENCIES([OBJCXX])],
[m4_define([AC_PROG_OBJCXX],
m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
# Variables for tags utilities; see am/tags.am
if test -z "$CTAGS"; then
CTAGS=ctags
fi
AC_SUBST([CTAGS])
if test -z "$ETAGS"; then
ETAGS=etags
fi
AC_SUBST([ETAGS])
if test -z "$CSCOPE"; then
CSCOPE=cscope
fi
AC_SUBST([CSCOPE])
AC_REQUIRE([AM_SILENT_RULES])dnl
dnl The testsuite driver may need to know about EXEEXT, so add the
dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard:
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: .
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
fi
fi
dnl The trailing newline in this macro's definition is deliberate, for
dnl backward compatibility and to allow trailing 'dnl'-style comments
dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
AC_SUBST([install_sh])])
# Copyright (C) 2003-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MAINTAINER_MODE([DEFAULT-MODE])
# ----------------------------------
# Control maintainer-specific portions of Makefiles.
# Default is to disable them, unless 'enable' is passed literally.
# For symmetry, 'disable' may be passed as well. Anyway, the user
# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
[m4_case(m4_default([$1], [disable]),
[enable], [m4_define([am_maintainer_other], [disable])],
[disable], [m4_define([am_maintainer_other], [enable])],
[m4_define([am_maintainer_other], [enable])
m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode's default is 'disable' unless 'enable' is passed
AC_ARG_ENABLE([maintainer-mode],
[AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
am_maintainer_other[ make rules and dependencies not useful
(and sometimes confusing) to the casual installer])],
[USE_MAINTAINER_MODE=$enableval],
[USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST([MAINT])dnl
]
)
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MAKE_INCLUDE()
# -----------------
# Check whether make has an 'include' directive that can support all
# the idioms we need for our automatic dependency tracking code.
AC_DEFUN([AM_MAKE_INCLUDE],
[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
cat > confinc.mk << 'END'
am__doit:
@echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
am__include="#"
am__quote=
# BSD make does it like this.
echo '.include "confinc.mk" # ignored' > confmf.BSD
# Other make implementations (GNU, Solaris 10, AIX) do it like this.
echo 'include confinc.mk # ignored' > confmf.GNU
_am_result=no
for s in GNU BSD; do
AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
AS_CASE([$?:`cat confinc.out 2>/dev/null`],
['0:this is the am__doit target'],
[AS_CASE([$s],
[BSD], [am__include='.include' am__quote='"'],
[am__include='include' am__quote=''])])
if test "$am__include" != "#"; then
_am_result="yes ($s style)"
break
fi
done
rm -f confinc.* confmf.*
AC_MSG_RESULT([${_am_result}])
AC_SUBST([am__include])])
AC_SUBST([am__quote])])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it is modern enough.
# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
MISSING="\${SHELL} '$am_aux_dir/missing'"
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
AC_MSG_WARN(['missing' script is too old or missing])
fi
])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# --------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_CC_C_O
# ---------------
# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
# to automatically call this.
AC_DEFUN([_AM_PROG_CC_C_O],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([compile])dnl
AC_LANG_PUSH([C])dnl
AC_CACHE_CHECK(
[whether $CC understands -c and -o together],
[am_cv_prog_cc_c_o],
[AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i])
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
(exit $ac_status); }])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[[\\\"\#\$\&\'\`$am_lf]]*)
AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
*[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
if test "$[2]" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT([yes])
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
AC_CONFIG_COMMANDS_PRE(
[AC_MSG_CHECKING([that generated files are newer than configure])
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
AC_MSG_RESULT([done])])
rm -f conftest.file
])
# Copyright (C) 2009-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
# ("yes" being less verbose, "no" or empty being verbose).
AC_DEFUN([AM_SILENT_RULES],
[AC_ARG_ENABLE([silent-rules], [dnl
AS_HELP_STRING(
[--enable-silent-rules],
[less verbose build output (undo: "make V=1")])
AS_HELP_STRING(
[--disable-silent-rules],
[verbose build output (undo: "make V=0")])dnl
])
case $enable_silent_rules in @%:@ (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
esac
dnl
dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
dnl do not support nested variable expansions.
dnl See automake bug#9928 and bug#10237.
am_make=${MAKE-make}
AC_CACHE_CHECK([whether $am_make supports nested variables],
[am_cv_make_support_nested_variables],
[if AS_ECHO([['TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi])
if test $am_cv_make_support_nested_variables = yes; then
dnl Using '$V' instead of '$(V)' breaks IRIX make.
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AC_SUBST([AM_V])dnl
AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Copyright (C) 2006-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
m4_if([$1], [v7],
[am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
[m4_case([$1],
[ustar],
[# The POSIX 1988 'ustar' format is defined with fixed-size fields.
# There is notably a 21 bits limit for the UID and the GID. In fact,
# the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
# and bug#13588).
am_max_uid=2097151 # 2^21 - 1
am_max_gid=$am_max_uid
# The $UID and $GID variables are not portable, so we need to resort
# to the POSIX-mandated id(1) utility. Errors in the 'id' calls
# below are definitely unexpected, so allow the users to see them
# (that is, avoid stderr redirection).
am_uid=`id -u || echo unknown`
am_gid=`id -g || echo unknown`
AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
if test $am_uid -le $am_max_uid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi
AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
if test $am_gid -le $am_max_gid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi],
[pax],
[],
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Go ahead even if we have the value already cached. We do so because we
# need to set the values for the 'am__tar' and 'am__untar' variables.
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
for _am_tool in $_am_tools; do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar; do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works.
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar /dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
m4_include([m4/binfmt-tar-sort-name.m4])
m4_include([gl/m4/00gnulib.m4])
m4_include([gl/m4/__inline.m4])
m4_include([gl/m4/absolute-header.m4])
m4_include([gl/m4/alloca.m4])
m4_include([gl/m4/argp.m4])
m4_include([gl/m4/builtin-expect.m4])
m4_include([gl/m4/calloc.m4])
m4_include([gl/m4/canonicalize.m4])
m4_include([gl/m4/close.m4])
m4_include([gl/m4/double-slash-root.m4])
m4_include([gl/m4/dup2.m4])
m4_include([gl/m4/eealloc.m4])
m4_include([gl/m4/errno_h.m4])
m4_include([gl/m4/error.m4])
m4_include([gl/m4/exponentd.m4])
m4_include([gl/m4/extensions.m4])
m4_include([gl/m4/extern-inline.m4])
m4_include([gl/m4/fcntl-o.m4])
m4_include([gl/m4/fcntl.m4])
m4_include([gl/m4/fcntl_h.m4])
m4_include([gl/m4/float_h.m4])
m4_include([gl/m4/free.m4])
m4_include([gl/m4/fstat.m4])
m4_include([gl/m4/getdelim.m4])
m4_include([gl/m4/getdtablesize.m4])
m4_include([gl/m4/getline.m4])
m4_include([gl/m4/getopt.m4])
m4_include([gl/m4/getprogname.m4])
m4_include([gl/m4/gnulib-common.m4])
m4_include([gl/m4/gnulib-comp.m4])
m4_include([gl/m4/include_next.m4])
m4_include([gl/m4/intmax_t.m4])
m4_include([gl/m4/inttypes.m4])
m4_include([gl/m4/inttypes_h.m4])
m4_include([gl/m4/largefile.m4])
m4_include([gl/m4/lib-ignore.m4])
m4_include([gl/m4/limits-h.m4])
m4_include([gl/m4/lstat.m4])
m4_include([gl/m4/malloc.m4])
m4_include([gl/m4/malloca.m4])
m4_include([gl/m4/manywarnings.m4])
m4_include([gl/m4/memchr.m4])
m4_include([gl/m4/mempcpy.m4])
m4_include([gl/m4/minmax.m4])
m4_include([gl/m4/mmap-anon.m4])
m4_include([gl/m4/mode_t.m4])
m4_include([gl/m4/msvc-inval.m4])
m4_include([gl/m4/msvc-nothrow.m4])
m4_include([gl/m4/multiarch.m4])
m4_include([gl/m4/nocrash.m4])
m4_include([gl/m4/off_t.m4])
m4_include([gl/m4/open-cloexec.m4])
m4_include([gl/m4/open-slash.m4])
m4_include([gl/m4/open.m4])
m4_include([gl/m4/pathmax.m4])
m4_include([gl/m4/printf.m4])
m4_include([gl/m4/rawmemchr.m4])
m4_include([gl/m4/readlink.m4])
m4_include([gl/m4/realloc.m4])
m4_include([gl/m4/reallocarray.m4])
m4_include([gl/m4/rename.m4])
m4_include([gl/m4/rmdir.m4])
m4_include([gl/m4/size_max.m4])
m4_include([gl/m4/sleep.m4])
m4_include([gl/m4/ssize_t.m4])
m4_include([gl/m4/stat-time.m4])
m4_include([gl/m4/stat.m4])
m4_include([gl/m4/stdalign.m4])
m4_include([gl/m4/stdarg.m4])
m4_include([gl/m4/stdbool.m4])
m4_include([gl/m4/stddef_h.m4])
m4_include([gl/m4/stdint.m4])
m4_include([gl/m4/stdint_h.m4])
m4_include([gl/m4/stdio_h.m4])
m4_include([gl/m4/stdlib_h.m4])
m4_include([gl/m4/strcase.m4])
m4_include([gl/m4/strchrnul.m4])
m4_include([gl/m4/strerror.m4])
m4_include([gl/m4/string_h.m4])
m4_include([gl/m4/strings_h.m4])
m4_include([gl/m4/strndup.m4])
m4_include([gl/m4/strnlen.m4])
m4_include([gl/m4/sys_socket_h.m4])
m4_include([gl/m4/sys_stat_h.m4])
m4_include([gl/m4/sys_types_h.m4])
m4_include([gl/m4/sysexits.m4])
m4_include([gl/m4/time_h.m4])
m4_include([gl/m4/unistd_h.m4])
m4_include([gl/m4/vasnprintf.m4])
m4_include([gl/m4/vasprintf.m4])
m4_include([gl/m4/vsnprintf.m4])
m4_include([gl/m4/warn-on-use.m4])
m4_include([gl/m4/warnings.m4])
m4_include([gl/m4/wchar_h.m4])
m4_include([gl/m4/wchar_t.m4])
m4_include([gl/m4/wint_t.m4])
m4_include([gl/m4/xalloc.m4])
m4_include([gl/m4/xsize.m4])
m4_include([gl/m4/xstrndup.m4])
m4_include([gl/m4/xvasprintf.m4])
m4_include([gl/m4/year2038.m4])
m4_include([gl/m4/zzgnulib.m4])
binfmt-support-2.2.2/bootstrap 0000777 0000000 0000000 00000105517 14246241610 013355 0000000 0000000 #! /bin/sh
# Print a version string.
scriptversion=2021-04-11.09; # UTC
# Bootstrap this package from checked-out sources.
# Copyright (C) 2003-2022 Free Software Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Originally written by Paul Eggert. The canonical version of this
# script is maintained as build-aux/bootstrap in gnulib, however, to
# be useful to your project, you should place a copy of it under
# version control in the top-level directory of your project. The
# intent is that all customization can be done with a bootstrap.conf
# file also maintained in your version control; gnulib comes with a
# template build-aux/bootstrap.conf to get you started.
# Please report bugs or propose patches to bug-gnulib@gnu.org.
nl='
'
# Ensure file names are sorted consistently across platforms.
LC_ALL=C
export LC_ALL
# Ensure that CDPATH is not set. Otherwise, the output from cd
# would cause trouble in at least one use below.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
local_gl_dir=gl
# Honor $PERL, but work even if there is none.
PERL="${PERL-perl}"
me=$0
default_gnulib_url=https://git.savannah.gnu.org/git/gnulib.git
usage() {
cat <&2
}
# warn_ WORD1...
warn_ ()
{
# If IFS does not start with ' ', set it and emit the warning in a subshell.
case $IFS in
' '*) warnf_ '%s\n' "$*";;
*) (IFS=' '; warn_ "$@");;
esac
}
# die WORD1...
die() { warn_ "$@"; exit 1; }
# Configuration.
# Name of the Makefile.am
gnulib_mk=gnulib.mk
# List of gnulib modules needed.
gnulib_modules=
# Any gnulib files needed that are not in modules.
gnulib_files=
: ${AUTOPOINT=autopoint}
: ${AUTORECONF=autoreconf}
# A function to be called for each unrecognized option. Returns 0 if
# the option in $1 has been processed by the function. Returns 1 if
# the option has not been processed by the function. Override it via
# your own definition in bootstrap.conf
bootstrap_option_hook() { return 1; }
# A function to be called in order to print the --help information
# corresponding to user-defined command-line options.
bootstrap_print_option_usage_hook() { :; }
# A function to be called right after gnulib-tool is run.
# Override it via your own definition in bootstrap.conf.
bootstrap_post_import_hook() { :; }
# A function to be called after everything else in this script.
# Override it via your own definition in bootstrap.conf.
bootstrap_epilogue() { :; }
# The command to download all .po files for a specified domain into a
# specified directory. Fill in the first %s with the destination
# directory and the second with the domain name.
po_download_command_format=\
"wget --mirror --level=1 -nd -nv -A.po -P '%s' \
https://translationproject.org/latest/%s/"
# Prefer a non-empty tarname (4th argument of AC_INIT if given), else
# fall back to the package name (1st argument with munging).
extract_package_name='
/^AC_INIT(\[*/{
s///
/^[^,]*,[^,]*,[^,]*,[ []*\([^][ ,)]\)/{
s//\1/
s/[],)].*//
p
q
}
s/[],)].*//
s/^GNU //
y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
s/[^abcdefghijklmnopqrstuvwxyz0123456789_]/-/g
p
}
'
package=$(${AUTOCONF:-autoconf} --trace AC_INIT:\$4 configure.ac 2>/dev/null)
if test -z "$package"; then
package=$(sed -n "$extract_package_name" configure.ac) \
|| die 'cannot find package name in configure.ac'
fi
gnulib_name=lib$package
build_aux=build-aux
source_base=lib
m4_base=m4
doc_base=doc
tests_base=tests
gnulib_extra_files="
build-aux/install-sh
build-aux/mdate-sh
build-aux/texinfo.tex
build-aux/depcomp
build-aux/config.guess
build-aux/config.sub
doc/INSTALL
"
# Additional gnulib-tool options to use. Use "\newline" to break lines.
gnulib_tool_option_extras=
# Other locale categories that need message catalogs.
EXTRA_LOCALE_CATEGORIES=
# Additional xgettext options to use. Use "\\\newline" to break lines.
XGETTEXT_OPTIONS='\\\
--flag=_:1:pass-c-format\\\
--flag=N_:1:pass-c-format\\\
--flag=error:3:c-format --flag=error_at_line:5:c-format\\\
'
# Package bug report address and copyright holder for gettext files
COPYRIGHT_HOLDER='Free Software Foundation, Inc.'
MSGID_BUGS_ADDRESS=bug-$package@gnu.org
# Files we don't want to import.
excluded_files=
# File that should exist in the top directory of a checked out hierarchy,
# but not in a distribution tarball.
checkout_only_file=README-hacking
# Whether to use copies instead of symlinks.
copy=false
# Set this to '.cvsignore .gitignore' in bootstrap.conf if you want
# those files to be generated in directories like lib/, m4/, and po/.
# Or set it to 'auto' to make this script select which to use based
# on which version control system (if any) is used in the source directory.
vc_ignore=auto
# Set this to true in bootstrap.conf to enable --bootstrap-sync by
# default.
bootstrap_sync=false
# Use git to update gnulib sources
use_git=true
check_exists() {
if test "$1" = "--verbose"; then
($2 --version /dev/null 2>&1
if test $? -ge 126; then
# If not found, run with diagnostics as one may be
# presented with env variables to set to find the right version
($2 --version /dev/null 2>&1
fi
test $? -lt 126
}
# find_tool ENVVAR NAMES...
# -------------------------
# Search for a required program. Use the value of ENVVAR, if set,
# otherwise find the first of the NAMES that can be run.
# If found, set ENVVAR to the program name, die otherwise.
#
# FIXME: code duplication, see also gnu-web-doc-update.
find_tool ()
{
find_tool_envvar=$1
shift
find_tool_names=$@
eval "find_tool_res=\$$find_tool_envvar"
if test x"$find_tool_res" = x; then
for i; do
if check_exists $i; then
find_tool_res=$i
break
fi
done
fi
if test x"$find_tool_res" = x; then
warn_ "one of these is required: $find_tool_names;"
die "alternatively set $find_tool_envvar to a compatible tool"
fi
eval "$find_tool_envvar=\$find_tool_res"
eval "export $find_tool_envvar"
}
# Strip blank and comment lines to leave significant entries.
gitignore_entries() {
sed '/^#/d; /^$/d' "$@"
}
# If $STR is not already on a line by itself in $FILE, insert it at the start.
# Entries are inserted at the start of the ignore list to ensure existing
# entries starting with ! are not overridden. Such entries support
# whitelisting exceptions after a more generic blacklist pattern.
insert_if_absent() {
file=$1
str=$2
test -f $file || touch $file
test -r $file || die "Error: failed to read ignore file: $file"
duplicate_entries=$(gitignore_entries $file | sort | uniq -d)
if [ "$duplicate_entries" ] ; then
die "Error: Duplicate entries in $file: " $duplicate_entries
fi
linesold=$(gitignore_entries $file | wc -l)
linesnew=$( { echo "$str"; cat $file; } | gitignore_entries | sort -u | wc -l)
if [ $linesold != $linesnew ] ; then
{ echo "$str" | cat - $file > $file.bak && mv $file.bak $file; } \
|| die "insert_if_absent $file $str: failed"
fi
}
# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with
# insert_if_absent.
insert_vc_ignore() {
vc_ignore_file="$1"
pattern="$2"
case $vc_ignore_file in
*.gitignore)
# A .gitignore entry that does not start with '/' applies
# recursively to subdirectories, so prepend '/' to every
# .gitignore entry.
pattern=$(echo "$pattern" | sed s,^,/,);;
esac
insert_if_absent "$vc_ignore_file" "$pattern"
}
symlink_to_dir()
{
src=$1/$2
dst=${3-$2}
test -f "$src" && {
# If the destination directory doesn't exist, create it.
# This is required at least for "lib/uniwidth/cjk.h".
dst_dir=$(dirname "$dst")
if ! test -d "$dst_dir"; then
mkdir -p "$dst_dir"
# If we've just created a directory like lib/uniwidth,
# tell version control system(s) it's ignorable.
# FIXME: for now, this does only one level
parent=$(dirname "$dst_dir")
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
ig=$parent/$dot_ig
insert_vc_ignore $ig "${dst_dir##*/}"
done
fi
if $copy; then
{
test ! -h "$dst" || {
echo "$me: rm -f $dst" &&
rm -f "$dst"
}
} &&
test -f "$dst" &&
cmp -s "$src" "$dst" || {
echo "$me: cp -fp $src $dst" &&
cp -fp "$src" "$dst"
}
else
# Leave any existing symlink alone, if it already points to the source,
# so that broken build tools that care about symlink times
# aren't confused into doing unnecessary builds. Conversely, if the
# existing symlink's timestamp is older than the source, make it afresh,
# so that broken tools aren't confused into skipping needed builds. See
# .
test -h "$dst" &&
src_ls=$(ls -diL "$src" 2>/dev/null) && set $src_ls && src_i=$1 &&
dst_ls=$(ls -diL "$dst" 2>/dev/null) && set $dst_ls && dst_i=$1 &&
test "$src_i" = "$dst_i" &&
both_ls=$(ls -dt "$src" "$dst") &&
test "X$both_ls" = "X$dst$nl$src" || {
dot_dots=
case $src in
/*) ;;
*)
case /$dst/ in
*//* | */../* | */./* | /*/*/*/*/*/)
die "invalid symlink calculation: $src -> $dst";;
/*/*/*/*/) dot_dots=../../../;;
/*/*/*/) dot_dots=../../;;
/*/*/) dot_dots=../;;
esac;;
esac
echo "$me: ln -fs $dot_dots$src $dst" &&
ln -fs "$dot_dots$src" "$dst"
}
fi
}
}
# Override the default configuration, if necessary.
# Make sure that bootstrap.conf is sourced from the current directory
# if we were invoked as "sh bootstrap".
case "$0" in
*/*) test -r "$0.conf" && . "$0.conf" ;;
*) test -r "$0.conf" && . ./"$0.conf" ;;
esac
if test "$vc_ignore" = auto; then
vc_ignore=
test -d .git && vc_ignore=.gitignore
test -d CVS && vc_ignore="$vc_ignore .cvsignore"
fi
if test x"$gnulib_modules$gnulib_files$gnulib_extra_files" = x; then
use_gnulib=false
else
use_gnulib=true
fi
# Translate configuration into internal form.
# Parse options.
for option
do
case $option in
--help)
usage
exit;;
--version)
set -e
echo "bootstrap $scriptversion"
echo "$copyright"
exit 0
;;
--gnulib-srcdir=*)
GNULIB_SRCDIR=${option#--gnulib-srcdir=};;
--skip-po)
SKIP_PO=t;;
--force)
checkout_only_file=;;
--copy)
copy=true;;
--bootstrap-sync)
bootstrap_sync=true;;
--no-bootstrap-sync)
bootstrap_sync=false;;
--no-git)
use_git=false;;
*)
bootstrap_option_hook $option || die "$option: unknown option";;
esac
done
$use_git || test -d "$GNULIB_SRCDIR" \
|| die "Error: --no-git requires --gnulib-srcdir"
if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
die "Bootstrapping from a non-checked-out distribution is risky."
fi
# Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
found_aux_dir=no
grep '^[ ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'\])' configure.ac \
>/dev/null && found_aux_dir=yes
grep '^[ ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
>/dev/null && found_aux_dir=yes
test $found_aux_dir = yes \
|| die "configure.ac lacks 'AC_CONFIG_AUX_DIR([$build_aux])'; add it"
# If $build_aux doesn't exist, create it now, otherwise some bits
# below will malfunction. If creating it, also mark it as ignored.
if test ! -d $build_aux; then
mkdir $build_aux
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
insert_vc_ignore $dot_ig $build_aux
done
fi
# Note this deviates from the version comparison in automake
# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
# but this should suffice as we won't be specifying old
# version formats or redundant trailing .0 in bootstrap.conf.
# If we did want full compatibility then we should probably
# use m4_version_compare from autoconf.
sort_ver() { # sort -V is not generally available
ver1="$1"
ver2="$2"
# split on '.' and compare each component
i=1
while : ; do
p1=$(echo "$ver1" | cut -d. -f$i)
p2=$(echo "$ver2" | cut -d. -f$i)
if [ ! "$p1" ]; then
echo "$1 $2"
break
elif [ ! "$p2" ]; then
echo "$2 $1"
break
elif [ ! "$p1" = "$p2" ]; then
if [ "$p1" -gt "$p2" ] 2>/dev/null; then # numeric comparison
echo "$2 $1"
elif [ "$p2" -gt "$p1" ] 2>/dev/null; then # numeric comparison
echo "$1 $2"
else # numeric, then lexicographic comparison
lp=$(printf "$p1\n$p2\n" | LANG=C sort -n | tail -n1)
if [ "$lp" = "$p2" ]; then
echo "$1 $2"
else
echo "$2 $1"
fi
fi
break
fi
i=$(($i+1))
done
}
get_version_sed='
# Move version to start of line.
s/.*[v ]\([0-9]\)/\1/
# Skip lines that do not start with version.
/^[0-9]/!d
# Remove characters after the version.
s/[^.a-z0-9-].*//
# The first component must be digits only.
s/^\([0-9]*\)[a-z-].*/\1/
#the following essentially does s/5.005/5.5/
s/\.0*\([1-9]\)/.\1/g
p
q'
get_version() {
app=$1
$app --version >/dev/null 2>&1 || { $app --version; return 1; }
$app --version 2>&1 | sed -n "$get_version_sed"
}
check_versions() {
ret=0
while read app req_ver; do
# We only need libtoolize from the libtool package.
if test "$app" = libtool; then
app=libtoolize
fi
# Exempt git if --no-git is in effect.
if test "$app" = git; then
$use_git || continue
fi
# Honor $APP variables ($TAR, $AUTOCONF, etc.)
appvar=$(echo $app | LC_ALL=C tr '[a-z]-' '[A-Z]_')
test "$appvar" = TAR && appvar=AMTAR
case $appvar in
GZIP) ;; # Do not use $GZIP: it contains gzip options.
PERL::*) ;; # Keep perl modules as-is
*) eval "app=\${$appvar-$app}" ;;
esac
# Handle the still-experimental Automake-NG programs specially.
# They remain named as the mainstream Automake programs ("automake",
# and "aclocal") to avoid gratuitous incompatibilities with
# pre-existing usages (by, say, autoreconf, or custom autogen.sh
# scripts), but correctly identify themselves (as being part of
# "GNU automake-ng") when asked their version.
case $app in
automake-ng|aclocal-ng)
app=${app%-ng}
($app --version | grep '(GNU automake-ng)') >/dev/null 2>&1 || {
warn_ "Error: '$app' not found or not from Automake-NG"
ret=1
continue
} ;;
# Another check is for perl modules. These can be written as
# e.g. perl::XML::XPath in case of XML::XPath module, etc.
perl::*)
# Extract module name
app="${app#perl::}"
if ! $PERL -m"$app" -e 'exit 0' >/dev/null 2>&1; then
warn_ "Error: perl module '$app' not found"
ret=1
fi
continue
;;
esac
if [ "$req_ver" = "-" ]; then
# Merely require app to exist; not all prereq apps are well-behaved
# so we have to rely on $? rather than get_version.
if ! check_exists --verbose $app; then
warn_ "Error: '$app' not found"
ret=1
fi
else
# Require app to produce a new enough version string.
inst_ver=$(get_version $app)
if [ ! "$inst_ver" ]; then
warn_ "Error: '$app' not found"
ret=1
else
latest_ver=$(sort_ver $req_ver $inst_ver | cut -d' ' -f2)
if [ ! "$latest_ver" = "$inst_ver" ]; then
warnf_ '%s\n' \
"Error: '$app' version == $inst_ver is too old" \
" '$app' version >= $req_ver is required"
ret=1
fi
fi
fi
done
return $ret
}
print_versions() {
echo "Program Min_version"
echo "----------------------"
printf %s "$buildreq"
echo "----------------------"
# can't depend on column -t
}
# Find sha1sum, named gsha1sum on MacPorts, shasum on Mac OS X 10.6.
# Also find the compatible sha1 utility on the BSDs
if test x"$SKIP_PO" = x; then
find_tool SHA1SUM sha1sum gsha1sum shasum sha1
fi
use_libtool=0
# We'd like to use grep -E, to see if any of LT_INIT,
# AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
# but that's not portable enough (e.g., for Solaris).
grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
&& use_libtool=1
grep '^[ ]*LT_INIT' configure.ac >/dev/null \
&& use_libtool=1
if test $use_libtool = 1; then
find_tool LIBTOOLIZE glibtoolize libtoolize
fi
# gnulib-tool requires at least automake and autoconf.
# If either is not listed, add it (with minimum version) as a prerequisite.
case $buildreq in
*automake*) ;;
*) buildreq="automake 1.9
$buildreq" ;;
esac
case $buildreq in
*autoconf*) ;;
*) buildreq="autoconf 2.59
$buildreq" ;;
esac
# When we can deduce that gnulib-tool will require patch,
# and when patch is not already listed as a prerequisite, add it, too.
if test -d "$local_gl_dir" \
&& ! find "$local_gl_dir" -name '*.diff' -exec false {} +; then
case $buildreq in
*patch*) ;;
*) buildreq="patch -
$buildreq" ;;
esac
fi
if ! printf "$buildreq" | check_versions; then
echo >&2
if test -f README-prereq; then
die "See README-prereq for how to get the prerequisite programs"
else
die "Please install the prerequisite programs"
fi
fi
# Warn the user if autom4te appears to be broken; this causes known
# issues with at least gettext 0.18.3.
probe=$(echo 'm4_quote([hi])' | autom4te -l M4sugar -t 'm4_quote:$%' -)
if test "x$probe" != xhi; then
warn_ "WARNING: your autom4te wrapper eats stdin;"
warn_ "if bootstrap fails, consider upgrading your autotools"
fi
echo "$0: Bootstrapping from checked-out $package sources..."
# See if we can use gnulib's git-merge-changelog merge driver.
if $use_git && test -d .git && check_exists git; then
if git config merge.merge-changelog.driver >/dev/null ; then
:
elif check_exists git-merge-changelog; then
echo "$0: initializing git-merge-changelog driver"
git config merge.merge-changelog.name 'GNU-style ChangeLog merge driver'
git config merge.merge-changelog.driver 'git-merge-changelog %O %A %B'
else
echo "$0: consider installing git-merge-changelog from gnulib"
fi
fi
cleanup_gnulib() {
status=$?
rm -fr "$gnulib_path"
exit $status
}
git_modules_config () {
test -f .gitmodules && git config --file .gitmodules "$@"
}
if $use_gnulib; then
if $use_git; then
gnulib_path=$(git_modules_config submodule.gnulib.path)
test -z "$gnulib_path" && gnulib_path=gnulib
fi
# Get gnulib files. Populate $GNULIB_SRCDIR, possibly updating a
# submodule, for use in the rest of the script.
case ${GNULIB_SRCDIR--} in
-)
# Note that $use_git is necessarily true in this case.
if git_modules_config submodule.gnulib.url >/dev/null; then
echo "$0: getting gnulib files..."
git submodule init -- "$gnulib_path" || exit $?
git submodule update -- "$gnulib_path" || exit $?
elif [ ! -d "$gnulib_path" ]; then
echo "$0: getting gnulib files..."
trap cleanup_gnulib 1 2 13 15
shallow=
if test -z "$GNULIB_REVISION"; then
git clone -h 2>&1 | grep -- --depth > /dev/null && shallow='--depth 2'
git clone $shallow ${GNULIB_URL:-$default_gnulib_url} "$gnulib_path" \
|| cleanup_gnulib
else
git fetch -h 2>&1 | grep -- --depth > /dev/null && shallow='--depth 2'
mkdir -p "$gnulib_path"
# Only want a shallow checkout of $GNULIB_REVISION, but git does not
# support cloning by commit hash. So attempt a shallow fetch by commit
# hash to minimize the amount of data downloaded and changes needed to
# be processed, which can drastically reduce download and processing
# time for checkout. If the fetch by commit fails, a shallow fetch can
# not be performed because we do not know what the depth of the commit
# is without fetching all commits. So fallback to fetching all commits.
git -C "$gnulib_path" init
git -C "$gnulib_path" remote add origin ${GNULIB_URL:-$default_gnulib_url}
git -C "$gnulib_path" fetch $shallow origin "$GNULIB_REVISION" \
|| git -C "$gnulib_path" fetch origin \
|| cleanup_gnulib
git -C "$gnulib_path" reset --hard FETCH_HEAD
fi
trap - 1 2 13 15
fi
GNULIB_SRCDIR=$gnulib_path
;;
*)
# Use GNULIB_SRCDIR directly or as a reference.
if $use_git && test -d "$GNULIB_SRCDIR"/.git && \
git_modules_config submodule.gnulib.url >/dev/null; then
echo "$0: getting gnulib files..."
if git submodule -h|grep -- --reference > /dev/null; then
# Prefer the one-liner available in git 1.6.4 or newer.
git submodule update --init --reference "$GNULIB_SRCDIR" \
"$gnulib_path" || exit $?
else
# This fallback allows at least git 1.5.5.
if test -f "$gnulib_path"/gnulib-tool; then
# Since file already exists, assume submodule init already complete.
git submodule update -- "$gnulib_path" || exit $?
else
# Older git can't clone into an empty directory.
rmdir "$gnulib_path" 2>/dev/null
git clone --reference "$GNULIB_SRCDIR" \
"$(git_modules_config submodule.gnulib.url)" "$gnulib_path" \
&& git submodule init -- "$gnulib_path" \
&& git submodule update -- "$gnulib_path" \
|| exit $?
fi
fi
GNULIB_SRCDIR=$gnulib_path
fi
;;
esac
if test -d "$GNULIB_SRCDIR"/.git && test -n "$GNULIB_REVISION" \
&& ! git_modules_config submodule.gnulib.url >/dev/null; then
(cd "$GNULIB_SRCDIR" && git checkout "$GNULIB_REVISION") || cleanup_gnulib
fi
# $GNULIB_SRCDIR now points to the version of gnulib to use, and
# we no longer need to use git or $gnulib_path below here.
if $bootstrap_sync; then
cmp -s "$0" "$GNULIB_SRCDIR/build-aux/bootstrap" || {
echo "$0: updating bootstrap and restarting..."
case $(sh -c 'echo "$1"' -- a) in
a) ignored=--;;
*) ignored=ignored;;
esac
exec sh -c \
'cp "$1" "$2" && shift && exec "${CONFIG_SHELL-/bin/sh}" "$@"' \
$ignored "$GNULIB_SRCDIR/build-aux/bootstrap" \
"$0" "$@" --no-bootstrap-sync
}
fi
gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
<$gnulib_tool || exit $?
fi
# Get translations.
download_po_files() {
subdir=$1
domain=$2
echo "$me: getting translations into $subdir for $domain..."
cmd=$(printf "$po_download_command_format" "$subdir" "$domain")
eval "$cmd"
}
# Mirror .po files to $po_dir/.reference and copy only the new
# or modified ones into $po_dir. Also update $po_dir/LINGUAS.
# Note po files that exist locally only are left in $po_dir but will
# not be included in LINGUAS and hence will not be distributed.
update_po_files() {
# Directory containing primary .po files.
# Overwrite them only when we're sure a .po file is new.
po_dir=$1
domain=$2
# Mirror *.po files into this dir.
# Usually contains *.s1 checksum files.
ref_po_dir="$po_dir/.reference"
test -d $ref_po_dir || mkdir $ref_po_dir || return
download_po_files $ref_po_dir $domain \
&& ls "$ref_po_dir"/*.po 2>/dev/null |
sed 's|.*/||; s|\.po$||' > "$po_dir/LINGUAS" || return
langs=$(cd $ref_po_dir && echo *.po | sed 's/\.po//g')
test "$langs" = '*' && langs=x
for po in $langs; do
case $po in x) continue;; esac
new_po="$ref_po_dir/$po.po"
cksum_file="$ref_po_dir/$po.s1"
if ! test -f "$cksum_file" ||
! test -f "$po_dir/$po.po" ||
! $SHA1SUM -c "$cksum_file" < "$new_po" > /dev/null 2>&1; then
echo "$me: updated $po_dir/$po.po..."
cp "$new_po" "$po_dir/$po.po" \
&& $SHA1SUM < "$new_po" > "$cksum_file" || return
fi
done
}
case $SKIP_PO in
'')
if test -d po; then
update_po_files po $package || exit
fi
if test -d runtime-po; then
update_po_files runtime-po $package-runtime || exit
fi;;
esac
version_controlled_file() {
parent=$1
file=$2
if test -d .git; then
git rm -n "$file" > /dev/null 2>&1
elif test -d .svn; then
svn log -r HEAD "$file" > /dev/null 2>&1
elif test -d CVS; then
grep -F "/${file##*/}/" "$parent/CVS/Entries" 2>/dev/null |
grep '^/[^/]*/[0-9]' > /dev/null
else
warn_ "no version control for $file?"
false
fi
}
# NOTE: we have to be careful to run both autopoint and libtoolize
# before gnulib-tool, since gnulib-tool is likely to provide newer
# versions of files "installed" by these two programs.
# Then, *after* gnulib-tool (see below), we have to be careful to
# run autoreconf in such a way that it does not run either of these
# two just-pre-run programs.
# Import from gettext.
with_gettext=yes
grep '^[ ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
with_gettext=no
if test $with_gettext = yes || test $use_libtool = 1; then
tempbase=.bootstrap$$
trap "rm -f $tempbase.0 $tempbase.1" 1 2 13 15
> $tempbase.0 > $tempbase.1 &&
find . ! -type d -print | sort > $tempbase.0 || exit
if test $with_gettext = yes; then
# Released autopoint has the tendency to install macros that have been
# obsoleted in current gnulib, so run this before gnulib-tool.
echo "$0: $AUTOPOINT --force"
$AUTOPOINT --force || exit
fi
# Autoreconf runs aclocal before libtoolize, which causes spurious
# warnings if the initial aclocal is confused by the libtoolized
# (or worse out-of-date) macro directory.
# libtoolize 1.9b added the --install option; but we support back
# to libtoolize 1.5.22, where the install action was default.
if test $use_libtool = 1; then
install=
case $($LIBTOOLIZE --help) in
*--install*) install=--install ;;
esac
echo "running: $LIBTOOLIZE $install --copy"
$LIBTOOLIZE $install --copy
fi
find . ! -type d -print | sort >$tempbase.1
old_IFS=$IFS
IFS=$nl
for file in $(comm -13 $tempbase.0 $tempbase.1); do
IFS=$old_IFS
parent=${file%/*}
version_controlled_file "$parent" "$file" || {
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
ig=$parent/$dot_ig
insert_vc_ignore "$ig" "${file##*/}"
done
}
done
IFS=$old_IFS
rm -f $tempbase.0 $tempbase.1
trap - 1 2 13 15
fi
# Import from gnulib.
if $use_gnulib; then
gnulib_tool_options="\
--no-changelog\
--aux-dir=$build_aux\
--doc-base=$doc_base\
--lib=$gnulib_name\
--m4-base=$m4_base/\
--source-base=$source_base/\
--tests-base=$tests_base\
--local-dir=$local_gl_dir\
$gnulib_tool_option_extras\
"
if test $use_libtool = 1; then
case "$gnulib_tool_options " in
*' --libtool '*) ;;
*) gnulib_tool_options="$gnulib_tool_options --libtool" ;;
esac
fi
echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
$gnulib_tool $gnulib_tool_options --import $gnulib_modules \
|| die "gnulib-tool failed"
for file in $gnulib_files; do
symlink_to_dir "$GNULIB_SRCDIR" $file \
|| die "failed to symlink $file"
done
fi
bootstrap_post_import_hook \
|| die "bootstrap_post_import_hook failed"
# Don't proceed if there are uninitialized submodules. In particular,
# the next step will remove dangling links, which might be links into
# uninitialized submodules.
#
# Uninitialized submodules are listed with an initial dash.
if $use_git && git submodule | grep '^-' >/dev/null; then
die "some git submodules are not initialized. " \
"Run 'git submodule update --init' and bootstrap again."
fi
# Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
# gnulib-populated directories. Such .m4 files would cause aclocal to fail.
# The following requires GNU find 4.2.3 or newer. Considering the usual
# portability constraints of this script, that may seem a very demanding
# requirement, but it should be ok. Ignore any failure, which is fine,
# since this is only a convenience to help developers avoid the relatively
# unusual case in which a symlinked-to .m4 file is git-removed from gnulib
# between successive runs of this script.
find "$m4_base" "$source_base" \
-depth \( -name '*.m4' -o -name '*.[ch]' \) \
-type l -xtype l -delete > /dev/null 2>&1
# Invoke autoreconf with --force --install to ensure upgrades of tools
# such as ylwrap.
AUTORECONFFLAGS="--verbose --install --force -I $m4_base $ACLOCAL_FLAGS"
# Some systems (RHEL 5) are using ancient autotools, for which the
# --no-recursive option had not been invented. Detect that lack and
# omit the option when it's not supported. FIXME in 2017: remove this
# hack when RHEL 5 autotools are updated, or when they become irrelevant.
case $($AUTORECONF --help) in
*--no-recursive*) AUTORECONFFLAGS="$AUTORECONFFLAGS --no-recursive";;
esac
# Tell autoreconf not to invoke autopoint or libtoolize; they were run above.
echo "running: AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS"
AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS \
|| die "autoreconf failed"
# Get some extra files from gnulib, overriding existing files.
for file in $gnulib_extra_files; do
case $file in
*/INSTALL) dst=INSTALL;;
build-aux/*) dst=$build_aux/${file#build-aux/};;
*) dst=$file;;
esac
symlink_to_dir "$GNULIB_SRCDIR" $file $dst \
|| die "failed to symlink $file"
done
if test $with_gettext = yes; then
# Create gettext configuration.
echo "$0: Creating po/Makevars from po/Makevars.template ..."
rm -f po/Makevars
sed '
/^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
/^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/
/^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'|
/^XGETTEXT_OPTIONS *=/{
s/$/ \\/
a\
'"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
}
' po/Makevars.template >po/Makevars \
|| die 'cannot generate po/Makevars'
# If the 'gettext' module is in use, grab the latest Makefile.in.in.
# If only the 'gettext-h' module is in use, assume autopoint already
# put the correct version of this file into place.
case $gnulib_modules in
*gettext-h*) ;;
*gettext*)
cp $GNULIB_SRCDIR/build-aux/po/Makefile.in.in po/Makefile.in.in \
|| die "cannot create po/Makefile.in.in"
;;
esac
if test -d runtime-po; then
# Similarly for runtime-po/Makevars, but not quite the same.
rm -f runtime-po/Makevars
sed '
/^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
/^subdir *=.*/s/=.*/= runtime-po/
/^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
/^XGETTEXT_OPTIONS *=/{
s/$/ \\/
a\
'"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
}
' po/Makevars.template >runtime-po/Makevars \
|| die 'cannot generate runtime-po/Makevars'
# Copy identical files from po to runtime-po.
(cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
fi
fi
bootstrap_epilogue
echo "$0: done. Now you can run './configure'."
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
binfmt-support-2.2.2/bootstrap.conf 0000666 0000000 0000000 00000002743 14246241610 014273 0000000 0000000 # Bootstrap configuration.
# Copyright (C) 2006-2018 Free Software Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
GNULIB_REVISION=1eae0f7ea3c220d054025f2c9211700665f9f4a0
# gnulib modules used by this package.
gnulib_modules="
argp
array-list
getline
gitlog-to-changelog
gnupload
hash-map
hash-pjw-bare
lib-ignore
manywarnings
rbtree-omap
rename
stdbool
strerror
warnings
xalloc
xlist
xmap
xomap
xstdopen
xstrndup
xvasprintf
"
gnulib_tool_option_extras="\
--no-conditional-dependencies \
--macro-prefix=gl \
--no-vc-files \
"
# This doesn't currently exist, but we set it to avoid confusion with 'gl'
# as the local output directory.
local_gl_dir=gnulib-local
gnulib_name=libgnu
source_base=gl/lib
m4_base=gl/m4
checkout_only_file=
copy=true
vc_ignore=
SKIP_PO=t
# Build prerequisites
buildreq="\
autoconf 2.64
automake 1.11
git 1.5.5
"
binfmt-support-2.2.2/build-aux/ 0000755 0000000 0000000 00000000000 14246242371 013354 5 0000000 0000000 binfmt-support-2.2.2/build-aux/compile 0000755 0000000 0000000 00000016350 14246242217 014656 0000000 0000000 #! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# Written by Tom Tromey .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN* | MSYS*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/* | msys/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
binfmt-support-2.2.2/build-aux/config.guess 0000755 0000000 0000000 00000140512 14246242217 015616 0000000 0000000 #! /bin/sh
# Attempt to guess a canonical system name.
# Copyright 1992-2022 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
timestamp='2022-01-09'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
# https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
#
# Please send patches to .
# The "shellcheck disable" line above the timestamp inhibits complaints
# about features and limitations of the classic Bourne shell that were
# superseded or lifted in POSIX. However, this script identifies a wide
# variety of pre-POSIX systems that do not have POSIX shells at all, and
# even some reasonably current systems (Solaris 10 as case-in-point) still
# have a pre-POSIX /bin/sh.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION]
Output the configuration name of the system \`$me' is run on.
Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
Copyright 1992-2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help" >&2
exit 1 ;;
* )
break ;;
esac
done
if test $# != 0; then
echo "$me: too many arguments$help" >&2
exit 1
fi
# Just in case it came from the environment.
GUESS=
# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.
# Portable tmp directory creation inspired by the Autoconf team.
tmp=
# shellcheck disable=SC2172
trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
set_cc_for_build() {
# prevent multiple calls if $tmp is already set
test "$tmp" && return 0
: "${TMPDIR=/tmp}"
# shellcheck disable=SC2039,SC3028
{ tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
dummy=$tmp/dummy
case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
,,) echo "int x;" > "$dummy.c"
for driver in cc gcc c89 c99 ; do
if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
CC_FOR_BUILD=$driver
break
fi
done
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
esac
}
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if test -f /.attbin/uname ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
case $UNAME_SYSTEM in
Linux|GNU|GNU/*)
LIBC=unknown
set_cc_for_build
cat <<-EOF > "$dummy.c"
#include
#if defined(__UCLIBC__)
LIBC=uclibc
#elif defined(__dietlibc__)
LIBC=dietlibc
#elif defined(__GLIBC__)
LIBC=gnu
#else
#include
/* First heuristic to detect musl libc. */
#ifdef __DEFINED_va_list
LIBC=musl
#endif
#endif
EOF
cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
eval "$cc_set_libc"
# Second heuristic to detect musl libc.
if [ "$LIBC" = unknown ] &&
command -v ldd >/dev/null &&
ldd --version 2>&1 | grep -q ^musl; then
LIBC=musl
fi
# If the system lacks a compiler, then just pick glibc.
# We could probably try harder.
if [ "$LIBC" = unknown ]; then
LIBC=gnu
fi
;;
esac
# Note: order is significant - the case branches are not exclusive.
case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
# compatibility and a consistent mechanism for selecting the
# object file format.
#
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
/usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
echo unknown)`
case $UNAME_MACHINE_ARCH in
aarch64eb) machine=aarch64_be-unknown ;;
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
earmv*)
arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
machine=${arch}${endian}-unknown
;;
*) machine=$UNAME_MACHINE_ARCH-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently (or will in the future) and ABI.
case $UNAME_MACHINE_ARCH in
earm*)
os=netbsdelf
;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
os=netbsd
else
os=netbsdelf
fi
;;
*)
os=netbsd
;;
esac
# Determine ABI tags.
case $UNAME_MACHINE_ARCH in
earm*)
expr='s/^earmv[0-9]/-eabi/;s/eb$//'
abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
;;
esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
# kernel version information, so it can be replaced with a
# suitable tag, in the style of linux-gnu.
case $UNAME_VERSION in
Debian*)
release='-gnu'
;;
*)
release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
GUESS=$machine-${os}${release}${abi-}
;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE
;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE
;;
*:SecBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE
;;
*:LibertyBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE
;;
*:MidnightBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE
;;
*:ekkoBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE
;;
*:SolidBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE
;;
*:OS108:*:*)
GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE
;;
macppc:MirBSD:*:*)
GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE
;;
*:MirBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE
;;
*:Sortix:*:*)
GUESS=$UNAME_MACHINE-unknown-sortix
;;
*:Twizzler:*:*)
GUESS=$UNAME_MACHINE-unknown-twizzler
;;
*:Redox:*:*)
GUESS=$UNAME_MACHINE-unknown-redox
;;
mips:OSF1:*.*)
GUESS=mips-dec-osf1
;;
alpha:OSF1:*:*)
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
trap '' 0
case $UNAME_RELEASE in
*4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
;;
*5.*)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
;;
esac
# According to Compaq, /usr/sbin/psrinfo has been available on
# OSF/1 and Tru64 systems produced since 1995. I hope that
# covers most systems running today. This code pipes the CPU
# types through head -n 1, so we only detect the type of CPU 0.
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case $ALPHA_CPU_TYPE in
"EV4 (21064)")
UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
UNAME_MACHINE=alpha ;;
"EV5 (21164)")
UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
GUESS=$UNAME_MACHINE-dec-osf$OSF_REL
;;
Amiga*:UNIX_System_V:4.0:*)
GUESS=m68k-unknown-sysv4
;;
*:[Aa]miga[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-amigaos
;;
*:[Mm]orph[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-morphos
;;
*:OS/390:*:*)
GUESS=i370-ibm-openedition
;;
*:z/VM:*:*)
GUESS=s390-ibm-zvmoe
;;
*:OS400:*:*)
GUESS=powerpc-ibm-os400
;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
GUESS=arm-acorn-riscix$UNAME_RELEASE
;;
arm*:riscos:*:*|arm*:RISCOS:*:*)
GUESS=arm-unknown-riscos
;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
GUESS=hppa1.1-hitachi-hiuxmpp
;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
case `(/bin/universe) 2>/dev/null` in
att) GUESS=pyramid-pyramid-sysv3 ;;
*) GUESS=pyramid-pyramid-bsd ;;
esac
;;
NILE*:*:*:dcosx)
GUESS=pyramid-pyramid-svr4
;;
DRS?6000:unix:4.0:6*)
GUESS=sparc-icl-nx6
;;
DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
sparc) GUESS=sparc-icl-nx7 ;;
esac
;;
s390x:SunOS:*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL
;;
sun4H:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-hal-solaris2$SUN_REL
;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris2$SUN_REL
;;
i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
GUESS=i386-pc-auroraux$UNAME_RELEASE
;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
set_cc_for_build
SUN_ARCH=i386
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
SUN_ARCH=x86_64
fi
fi
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$SUN_ARCH-pc-solaris2$SUN_REL
;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris3$SUN_REL
;;
sun4*:SunOS:*:*)
case `/usr/bin/arch -k` in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'`
GUESS=sparc-sun-sunos$SUN_REL
;;
sun3*:SunOS:*:*)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
case `/bin/arch` in
sun3)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun4)
GUESS=sparc-sun-sunos$UNAME_RELEASE
;;
esac
;;
aushp:SunOS:*:*)
GUESS=sparc-auspex-sunos$UNAME_RELEASE
;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# > m68000). The system name ranges from "MiNT" over "FreeMiNT"
# to the lowercase version "mint" (or "freemint"). Finally
# the system name "TOS" denotes a system which is actually not
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
GUESS=m68k-milan-mint$UNAME_RELEASE
;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
GUESS=m68k-hades-mint$UNAME_RELEASE
;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
GUESS=m68k-unknown-mint$UNAME_RELEASE
;;
m68k:machten:*:*)
GUESS=m68k-apple-machten$UNAME_RELEASE
;;
powerpc:machten:*:*)
GUESS=powerpc-apple-machten$UNAME_RELEASE
;;
RISC*:Mach:*:*)
GUESS=mips-dec-mach_bsd4.3
;;
RISC*:ULTRIX:*:*)
GUESS=mips-dec-ultrix$UNAME_RELEASE
;;
VAX*:ULTRIX*:*:*)
GUESS=vax-dec-ultrix$UNAME_RELEASE
;;
2020:CLIX:*:* | 2430:CLIX:*:*)
GUESS=clipper-intergraph-clix$UNAME_RELEASE
;;
mips:*:*:UMIPS | mips:*:*:RISCos)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#ifdef __cplusplus
#include /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=mips-mips-riscos$UNAME_RELEASE
;;
Motorola:PowerMAX_OS:*:*)
GUESS=powerpc-motorola-powermax
;;
Motorola:*:4.3:PL8-*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:Power_UNIX:*:*)
GUESS=powerpc-harris-powerunix
;;
m88k:CX/UX:7*:*)
GUESS=m88k-harris-cxux7
;;
m88k:*:4*:R4*)
GUESS=m88k-motorola-sysv4
;;
m88k:*:3*:R3*)
GUESS=m88k-motorola-sysv3
;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110
then
if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \
test "$TARGET_BINARY_INTERFACE"x = x
then
GUESS=m88k-dg-dgux$UNAME_RELEASE
else
GUESS=m88k-dg-dguxbcs$UNAME_RELEASE
fi
else
GUESS=i586-dg-dgux$UNAME_RELEASE
fi
;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
GUESS=m88k-dolphin-sysv3
;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
GUESS=m88k-motorola-sysv3
;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
GUESS=m88k-tektronix-sysv3
;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
GUESS=m68k-tektronix-bsd
;;
*:IRIX*:*:*)
IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'`
GUESS=mips-sgi-irix$IRIX_REL
;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
GUESS=romp-ibm-aix # uname -m gives an 8 hex-code CPU id
;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
GUESS=i386-ibm-aix
;;
ia64:AIX:*:*)
if test -x /usr/bin/oslevel ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV
;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
main()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
then
GUESS=$SYSTEM_NAME
else
GUESS=rs6000-ibm-aix3.2.5
fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
GUESS=rs6000-ibm-aix3.2.4
else
GUESS=rs6000-ibm-aix3.2
fi
;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if test -x /usr/bin/lslpp ; then
IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \
awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$IBM_ARCH-ibm-aix$IBM_REV
;;
*:AIX:*:*)
GUESS=rs6000-ibm-aix
;;
ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
GUESS=romp-ibm-bsd4.4
;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
GUESS=romp-ibm-bsd$UNAME_RELEASE # 4.3 with uname added to
;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
GUESS=rs6000-bull-bosx
;;
DPX/2?00:B.O.S.:*:*)
GUESS=m68k-bull-sysv3
;;
9000/[34]??:4.3bsd:1.*:*)
GUESS=m68k-hp-bsd
;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
GUESS=m68k-hp-bsd4.4
;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
case $UNAME_MACHINE in
9000/31?) HP_ARCH=m68000 ;;
9000/[34]??) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
if test -x /usr/bin/getconf; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case $sc_cpu_version in
523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
case $sc_kernel_bits in
32) HP_ARCH=hppa2.0n ;;
64) HP_ARCH=hppa2.0w ;;
'') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
esac ;;
esac
fi
if test "$HP_ARCH" = ""; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#define _HPUX_SOURCE
#include
#include
int main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
#endif
long cpu = sysconf (_SC_CPU_VERSION);
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
case CPU_PA_RISC2_0:
#if defined(_SC_KERNEL_BITS)
switch (bits)
{
case 64: puts ("hppa2.0w"); break;
case 32: puts ("hppa2.0n"); break;
default: puts ("hppa2.0"); break;
} break;
#else /* !defined(_SC_KERNEL_BITS) */
puts ("hppa2.0"); break;
#endif
default: puts ("hppa1.0"); break;
}
exit (0);
}
EOF
(CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
if test "$HP_ARCH" = hppa2.0w
then
set_cc_for_build
# hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
# 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
# generating 64-bit code. GNU and HP use different nomenclature:
#
# $ CC_FOR_BUILD=cc ./config.guess
# => hppa2.0w-hp-hpux11.23
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
HP_ARCH=hppa2.0w
else
HP_ARCH=hppa64
fi
fi
GUESS=$HP_ARCH-hp-hpux$HPUX_REV
;;
ia64:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
GUESS=ia64-hp-hpux$HPUX_REV
;;
3050*:HI-UX:*:*)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
int
main ()
{
long cpu = sysconf (_SC_CPU_VERSION);
/* The order matters, because CPU_IS_HP_MC68K erroneously returns
true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
results, however. */
if (CPU_IS_PA_RISC (cpu))
{
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
default: puts ("hppa-hitachi-hiuxwe2"); break;
}
}
else if (CPU_IS_HP_MC68K (cpu))
puts ("m68k-hitachi-hiuxwe2");
else puts ("unknown-hitachi-hiuxwe2");
exit (0);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=unknown-hitachi-hiuxwe2
;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
GUESS=hppa1.1-hp-bsd
;;
9000/8??:4.3bsd:*:*)
GUESS=hppa1.0-hp-bsd
;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
GUESS=hppa1.0-hp-mpeix
;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
GUESS=hppa1.1-hp-osf
;;
hp8??:OSF1:*:*)
GUESS=hppa1.0-hp-osf
;;
i*86:OSF1:*:*)
if test -x /usr/sbin/sysversion ; then
GUESS=$UNAME_MACHINE-unknown-osf1mk
else
GUESS=$UNAME_MACHINE-unknown-osf1
fi
;;
parisc*:Lites*:*:*)
GUESS=hppa1.1-hp-lites
;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
GUESS=c1-convex-bsd
;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
GUESS=c34-convex-bsd
;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
GUESS=c38-convex-bsd
;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
GUESS=c4-convex-bsd
;;
CRAY*Y-MP:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=ymp-cray-unicos$CRAY_REL
;;
CRAY*[A-Z]90:*:*:*)
echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
exit ;;
CRAY*TS:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=t90-cray-unicos$CRAY_REL
;;
CRAY*T3E:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=alphaev5-cray-unicosmk$CRAY_REL
;;
CRAY*SV1:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=sv1-cray-unicos$CRAY_REL
;;
*:UNICOS/mp:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=craynv-cray-unicosmp$CRAY_REL
;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
5000:UNIX_System_V:4.*:*)
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE
;;
sparc*:BSD/OS:*:*)
GUESS=sparc-unknown-bsdi$UNAME_RELEASE
;;
*:BSD/OS:*:*)
GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE
;;
arm:FreeBSD:*:*)
UNAME_PROCESSOR=`uname -p`
set_cc_for_build
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi
else
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf
fi
;;
*:FreeBSD:*:*)
UNAME_PROCESSOR=`/usr/bin/uname -p`
case $UNAME_PROCESSOR in
amd64)
UNAME_PROCESSOR=x86_64 ;;
i386)
UNAME_PROCESSOR=i586 ;;
esac
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL
;;
i*:CYGWIN*:*)
GUESS=$UNAME_MACHINE-pc-cygwin
;;
*:MINGW64*:*)
GUESS=$UNAME_MACHINE-pc-mingw64
;;
*:MINGW*:*)
GUESS=$UNAME_MACHINE-pc-mingw32
;;
*:MSYS*:*)
GUESS=$UNAME_MACHINE-pc-msys
;;
i*:PW*:*)
GUESS=$UNAME_MACHINE-pc-pw32
;;
*:SerenityOS:*:*)
GUESS=$UNAME_MACHINE-pc-serenity
;;
*:Interix*:*)
case $UNAME_MACHINE in
x86)
GUESS=i586-pc-interix$UNAME_RELEASE
;;
authenticamd | genuineintel | EM64T)
GUESS=x86_64-unknown-interix$UNAME_RELEASE
;;
IA64)
GUESS=ia64-unknown-interix$UNAME_RELEASE
;;
esac ;;
i*:UWIN*:*)
GUESS=$UNAME_MACHINE-pc-uwin
;;
amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
GUESS=x86_64-pc-cygwin
;;
prep*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=powerpcle-unknown-solaris2$SUN_REL
;;
*:GNU:*:*)
# the GNU system
GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'`
GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL
;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC
;;
*:Minix:*:*)
GUESS=$UNAME_MACHINE-unknown-minix
;;
aarch64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
aarch64_be:Linux:*:*)
UNAME_MACHINE=aarch64_be
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in
EV5) UNAME_MACHINE=alphaev5 ;;
EV56) UNAME_MACHINE=alphaev56 ;;
PCA56) UNAME_MACHINE=alphapca56 ;;
PCA57) UNAME_MACHINE=alphapca56 ;;
EV6) UNAME_MACHINE=alphaev6 ;;
EV67) UNAME_MACHINE=alphaev67 ;;
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arm*:Linux:*:*)
set_cc_for_build
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
else
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi
else
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf
fi
fi
;;
avr32*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
cris:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
crisv32:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
e2k:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
frv:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
hexagon:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:Linux:*:*)
GUESS=$UNAME_MACHINE-pc-linux-$LIBC
;;
ia64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
k1om:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
loongarch32:Linux:*:* | loongarch64:Linux:*:* | loongarchx32:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m32r*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m68*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
mips:Linux:*:* | mips64:Linux:*:*)
set_cc_for_build
IS_GLIBC=0
test x"${LIBC}" = xgnu && IS_GLIBC=1
sed 's/^ //' << EOF > "$dummy.c"
#undef CPU
#undef mips
#undef mipsel
#undef mips64
#undef mips64el
#if ${IS_GLIBC} && defined(_ABI64)
LIBCABI=gnuabi64
#else
#if ${IS_GLIBC} && defined(_ABIN32)
LIBCABI=gnuabin32
#else
LIBCABI=${LIBC}
#endif
#endif
#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa64r6
#else
#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa32r6
#else
#if defined(__mips64)
CPU=mips64
#else
CPU=mips
#endif
#endif
#endif
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
MIPS_ENDIAN=el
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
MIPS_ENDIAN=
#else
MIPS_ENDIAN=
#endif
#endif
EOF
cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`
eval "$cc_set_vars"
test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
;;
mips64el:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
openrisc*:Linux:*:*)
GUESS=or1k-unknown-linux-$LIBC
;;
or32:Linux:*:* | or1k*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
padre:Linux:*:*)
GUESS=sparc-unknown-linux-$LIBC
;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
GUESS=hppa64-unknown-linux-$LIBC
;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;;
PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;;
*) GUESS=hppa-unknown-linux-$LIBC ;;
esac
;;
ppc64:Linux:*:*)
GUESS=powerpc64-unknown-linux-$LIBC
;;
ppc:Linux:*:*)
GUESS=powerpc-unknown-linux-$LIBC
;;
ppc64le:Linux:*:*)
GUESS=powerpc64le-unknown-linux-$LIBC
;;
ppcle:Linux:*:*)
GUESS=powerpcle-unknown-linux-$LIBC
;;
riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
s390:Linux:*:* | s390x:Linux:*:*)
GUESS=$UNAME_MACHINE-ibm-linux-$LIBC
;;
sh64*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sh*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sparc:Linux:*:* | sparc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
tile*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
vax:Linux:*:*)
GUESS=$UNAME_MACHINE-dec-linux-$LIBC
;;
x86_64:Linux:*:*)
set_cc_for_build
LIBCABI=$LIBC
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_X32 >/dev/null
then
LIBCABI=${LIBC}x32
fi
fi
GUESS=$UNAME_MACHINE-pc-linux-$LIBCABI
;;
xtensa*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
GUESS=i386-sequent-sysv4
;;
i*86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION
;;
i*86:OS/2:*:*)
# If we were able to find `uname', then EMX Unix compatibility
# is probably installed.
GUESS=$UNAME_MACHINE-pc-os2-emx
;;
i*86:XTS-300:*:STOP)
GUESS=$UNAME_MACHINE-unknown-stop
;;
i*86:atheos:*:*)
GUESS=$UNAME_MACHINE-unknown-atheos
;;
i*86:syllable:*:*)
GUESS=$UNAME_MACHINE-pc-syllable
;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
GUESS=i386-unknown-lynxos$UNAME_RELEASE
;;
i*86:*DOS:*:*)
GUESS=$UNAME_MACHINE-pc-msdosdjgpp
;;
i*86:*:4.*:*)
UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL
fi
;;
i*86:*:5:[678]*)
# UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
&& UNAME_MACHINE=i686
(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv32
fi
;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
# prints for the "djgpp" host, or else GDB configure will decide that
# this is a cross-build.
GUESS=i586-pc-msdosdjgpp
;;
Intel:Mach:3*:*)
GUESS=i386-pc-mach3
;;
paragon:*:*:*)
GUESS=i860-intel-osf1
;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
GUESS=i860-stardent-sysv$UNAME_RELEASE # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
GUESS=i860-unknown-sysv$UNAME_RELEASE # Unknown i860-SVR4
fi
;;
mini*:CTIX:SYS*5:*)
# "miniframe"
GUESS=m68010-convergent-sysv
;;
mc68k:UNIX:SYSTEM5:3.51m)
GUESS=m68k-convergent-sysv
;;
M680?0:D-NIX:5.3:*)
GUESS=m68k-diab-dnix
;;
M68*:*:R3V[5678]*:*)
test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4; exit; } ;;
NCR*:*:4.2:* | MPRAS*:*:4.2:*)
OS_REL='.3'
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
GUESS=m68k-unknown-lynxos$UNAME_RELEASE
;;
mc68030:UNIX_System_V:4.*:*)
GUESS=m68k-atari-sysv4
;;
TSUNAMI:LynxOS:2.*:*)
GUESS=sparc-unknown-lynxos$UNAME_RELEASE
;;
rs6000:LynxOS:2.*:*)
GUESS=rs6000-unknown-lynxos$UNAME_RELEASE
;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
GUESS=powerpc-unknown-lynxos$UNAME_RELEASE
;;
SM[BE]S:UNIX_SV:*:*)
GUESS=mips-dde-sysv$UNAME_RELEASE
;;
RM*:ReliantUNIX-*:*:*)
GUESS=mips-sni-sysv4
;;
RM*:SINIX-*:*:*)
GUESS=mips-sni-sysv4
;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
GUESS=$UNAME_MACHINE-sni-sysv4
else
GUESS=ns32k-sni-sysv
fi
;;
PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
# says
GUESS=i586-unisys-sysv4
;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes .
# How about differentiating between stratus architectures? -djm
GUESS=hppa1.1-stratus-sysv4
;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
GUESS=i860-stratus-sysv4
;;
i*86:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=$UNAME_MACHINE-stratus-vos
;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=hppa1.1-stratus-vos
;;
mc68*:A/UX:*:*)
GUESS=m68k-apple-aux$UNAME_RELEASE
;;
news*:NEWS-OS:6*:*)
GUESS=mips-sony-newsos6
;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if test -d /usr/nec; then
GUESS=mips-nec-sysv$UNAME_RELEASE
else
GUESS=mips-unknown-sysv$UNAME_RELEASE
fi
;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
GUESS=powerpc-be-beos
;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
GUESS=powerpc-apple-beos
;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
GUESS=i586-pc-beos
;;
BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
GUESS=i586-pc-haiku
;;
x86_64:Haiku:*:*)
GUESS=x86_64-unknown-haiku
;;
SX-4:SUPER-UX:*:*)
GUESS=sx4-nec-superux$UNAME_RELEASE
;;
SX-5:SUPER-UX:*:*)
GUESS=sx5-nec-superux$UNAME_RELEASE
;;
SX-6:SUPER-UX:*:*)
GUESS=sx6-nec-superux$UNAME_RELEASE
;;
SX-7:SUPER-UX:*:*)
GUESS=sx7-nec-superux$UNAME_RELEASE
;;
SX-8:SUPER-UX:*:*)
GUESS=sx8-nec-superux$UNAME_RELEASE
;;
SX-8R:SUPER-UX:*:*)
GUESS=sx8r-nec-superux$UNAME_RELEASE
;;
SX-ACE:SUPER-UX:*:*)
GUESS=sxace-nec-superux$UNAME_RELEASE
;;
Power*:Rhapsody:*:*)
GUESS=powerpc-apple-rhapsody$UNAME_RELEASE
;;
*:Rhapsody:*:*)
GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE
;;
arm64:Darwin:*:*)
GUESS=aarch64-apple-darwin$UNAME_RELEASE
;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p`
case $UNAME_PROCESSOR in
unknown) UNAME_PROCESSOR=powerpc ;;
esac
if command -v xcode-select > /dev/null 2> /dev/null && \
! xcode-select --print-path > /dev/null 2> /dev/null ; then
# Avoid executing cc if there is no toolchain installed as
# cc will be a stub that puts up a graphical alert
# prompting the user to install developer tools.
CC_FOR_BUILD=no_compiler_found
else
set_cc_for_build
fi
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
case $UNAME_PROCESSOR in
i386) UNAME_PROCESSOR=x86_64 ;;
powerpc) UNAME_PROCESSOR=powerpc64 ;;
esac
fi
# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_PPC >/dev/null
then
UNAME_PROCESSOR=powerpc
fi
elif test "$UNAME_PROCESSOR" = i386 ; then
# uname -m returns i386 or x86_64
UNAME_PROCESSOR=$UNAME_MACHINE
fi
GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE
;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE
;;
*:QNX:*:4*)
GUESS=i386-pc-qnx
;;
NEO-*:NONSTOP_KERNEL:*:*)
GUESS=neo-tandem-nsk$UNAME_RELEASE
;;
NSE-*:NONSTOP_KERNEL:*:*)
GUESS=nse-tandem-nsk$UNAME_RELEASE
;;
NSR-*:NONSTOP_KERNEL:*:*)
GUESS=nsr-tandem-nsk$UNAME_RELEASE
;;
NSV-*:NONSTOP_KERNEL:*:*)
GUESS=nsv-tandem-nsk$UNAME_RELEASE
;;
NSX-*:NONSTOP_KERNEL:*:*)
GUESS=nsx-tandem-nsk$UNAME_RELEASE
;;
*:NonStop-UX:*:*)
GUESS=mips-compaq-nonstopux
;;
BS2000:POSIX*:*:*)
GUESS=bs2000-siemens-sysv
;;
DS/*:UNIX_System_V:*:*)
GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE
;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
if test "${cputype-}" = 386; then
UNAME_MACHINE=i386
elif test "x${cputype-}" != x; then
UNAME_MACHINE=$cputype
fi
GUESS=$UNAME_MACHINE-unknown-plan9
;;
*:TOPS-10:*:*)
GUESS=pdp10-unknown-tops10
;;
*:TENEX:*:*)
GUESS=pdp10-unknown-tenex
;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
GUESS=pdp10-dec-tops20
;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
GUESS=pdp10-xkl-tops20
;;
*:TOPS-20:*:*)
GUESS=pdp10-unknown-tops20
;;
*:ITS:*:*)
GUESS=pdp10-unknown-its
;;
SEI:*:*:SEIUX)
GUESS=mips-sei-seiux$UNAME_RELEASE
;;
*:DragonFly:*:*)
DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL
;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
case $UNAME_MACHINE in
A*) GUESS=alpha-dec-vms ;;
I*) GUESS=ia64-dec-vms ;;
V*) GUESS=vax-dec-vms ;;
esac ;;
*:XENIX:*:SysV)
GUESS=i386-pc-xenix
;;
i*86:skyos:*:*)
SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`
GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL
;;
i*86:rdos:*:*)
GUESS=$UNAME_MACHINE-pc-rdos
;;
i*86:Fiwix:*:*)
GUESS=$UNAME_MACHINE-pc-fiwix
;;
*:AROS:*:*)
GUESS=$UNAME_MACHINE-unknown-aros
;;
x86_64:VMkernel:*:*)
GUESS=$UNAME_MACHINE-unknown-esx
;;
amd64:Isilon\ OneFS:*:*)
GUESS=x86_64-unknown-onefs
;;
*:Unleashed:*:*)
GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE
;;
esac
# Do we have a guess based on uname results?
if test "x$GUESS" != x; then
echo "$GUESS"
exit
fi
# No uname command or uname output not recognized.
set_cc_for_build
cat > "$dummy.c" <
#include
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#include
#if defined(_SIZE_T_) || defined(SIGLOST)
#include
#endif
#endif
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
/* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
I don't know.... */
printf ("mips-sony-bsd\n"); exit (0);
#else
#include
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
"4"
#else
""
#endif
); exit (0);
#endif
#endif
#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
if (version < 4)
printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
else
printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
printf ("ns32k-encore-mach\n"); exit (0);
#else
printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif
#if defined (__386BSD__)
printf ("i386-pc-bsd\n"); exit (0);
#endif
#if defined (sequent)
#if defined (i386)
printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif
#if defined (_SEQUENT_)
struct utsname un;
uname(&un);
if (strncmp(un.version, "V2", 2) == 0) {
printf ("i386-sequent-ptx2\n"); exit (0);
}
if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
printf ("i386-sequent-ptx1\n"); exit (0);
}
printf ("i386-sequent-ptx\n"); exit (0);
#endif
#if defined (vax)
#if !defined (ultrix)
#include
#if defined (BSD)
#if BSD == 43
printf ("vax-dec-bsd4.3\n"); exit (0);
#else
#if BSD == 199006
printf ("vax-dec-bsd4.3reno\n"); exit (0);
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#endif
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#else
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname un;
uname (&un);
printf ("vax-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname *un;
uname (&un);
printf ("mips-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("mips-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined (alliant) && defined (i860)
printf ("i860-alliant-bsd\n"); exit (0);
#endif
exit (1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
echo "$0: unable to guess system type" >&2
case $UNAME_MACHINE:$UNAME_SYSTEM in
mips:Linux | mips64:Linux)
# If we got here on MIPS GNU/Linux, output extra information.
cat >&2 <&2 <&2 </dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
hostinfo = `(hostinfo) 2>/dev/null`
/bin/universe = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
UNAME_MACHINE = "$UNAME_MACHINE"
UNAME_RELEASE = "$UNAME_RELEASE"
UNAME_SYSTEM = "$UNAME_SYSTEM"
UNAME_VERSION = "$UNAME_VERSION"
EOF
fi
exit 1
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
binfmt-support-2.2.2/build-aux/config.sub 0000755 0000000 0000000 00000105116 14246242165 015264 0000000 0000000 #! /bin/sh
# Configuration validation subroutine script.
# Copyright 1992-2021 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
timestamp='2021-12-25'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
# Please send patches to .
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
# https://git.savannah.gnu.org/cgit/config.git/plain/config.sub
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support. The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
# The "shellcheck disable" line above the timestamp inhibits complaints
# about features and limitations of the classic Bourne shell that were
# superseded or lifted in POSIX. However, this script identifies a wide
# variety of pre-POSIX systems that do not have POSIX shells at all, and
# even some reasonably current systems (Solaris 10 as case-in-point) still
# have a pre-POSIX /bin/sh.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
Canonicalize a configuration name.
Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.sub ($timestamp)
Copyright 1992-2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help" >&2
exit 1 ;;
*local*)
# First pass through any local machine types.
echo "$1"
exit ;;
* )
break ;;
esac
done
case $# in
0) echo "$me: missing argument$help" >&2
exit 1;;
1) ;;
*) echo "$me: too many arguments$help" >&2
exit 1;;
esac
# Split fields of configuration type
# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read field1 field2 field3 field4 <&2
exit 1
;;
*-*-*-*)
basic_machine=$field1-$field2
basic_os=$field3-$field4
;;
*-*-*)
# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
# parts
maybe_os=$field2-$field3
case $maybe_os in
nto-qnx* | linux-* | uclinux-uclibc* \
| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
| storm-chaos* | os2-emx* | rtmk-nova*)
basic_machine=$field1
basic_os=$maybe_os
;;
android-linux)
basic_machine=$field1-unknown
basic_os=linux-android
;;
*)
basic_machine=$field1-$field2
basic_os=$field3
;;
esac
;;
*-*)
# A lone config we happen to match not fitting any pattern
case $field1-$field2 in
decstation-3100)
basic_machine=mips-dec
basic_os=
;;
*-*)
# Second component is usually, but not always the OS
case $field2 in
# Prevent following clause from handling this valid os
sun*os*)
basic_machine=$field1
basic_os=$field2
;;
zephyr*)
basic_machine=$field1-unknown
basic_os=$field2
;;
# Manufacturers
dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
| att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
| unicom* | ibm* | next | hp | isi* | apollo | altos* \
| convergent* | ncr* | news | 32* | 3600* | 3100* \
| hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
| ultra | tti* | harris | dolphin | highlevel | gould \
| cbm | ns | masscomp | apple | axis | knuth | cray \
| microblaze* | sim | cisco \
| oki | wec | wrs | winbond)
basic_machine=$field1-$field2
basic_os=
;;
*)
basic_machine=$field1
basic_os=$field2
;;
esac
;;
esac
;;
*)
# Convert single-component short-hands not valid as part of
# multi-component configurations.
case $field1 in
386bsd)
basic_machine=i386-pc
basic_os=bsd
;;
a29khif)
basic_machine=a29k-amd
basic_os=udi
;;
adobe68k)
basic_machine=m68010-adobe
basic_os=scout
;;
alliant)
basic_machine=fx80-alliant
basic_os=
;;
altos | altos3068)
basic_machine=m68k-altos
basic_os=
;;
am29k)
basic_machine=a29k-none
basic_os=bsd
;;
amdahl)
basic_machine=580-amdahl
basic_os=sysv
;;
amiga)
basic_machine=m68k-unknown
basic_os=
;;
amigaos | amigados)
basic_machine=m68k-unknown
basic_os=amigaos
;;
amigaunix | amix)
basic_machine=m68k-unknown
basic_os=sysv4
;;
apollo68)
basic_machine=m68k-apollo
basic_os=sysv
;;
apollo68bsd)
basic_machine=m68k-apollo
basic_os=bsd
;;
aros)
basic_machine=i386-pc
basic_os=aros
;;
aux)
basic_machine=m68k-apple
basic_os=aux
;;
balance)
basic_machine=ns32k-sequent
basic_os=dynix
;;
blackfin)
basic_machine=bfin-unknown
basic_os=linux
;;
cegcc)
basic_machine=arm-unknown
basic_os=cegcc
;;
convex-c1)
basic_machine=c1-convex
basic_os=bsd
;;
convex-c2)
basic_machine=c2-convex
basic_os=bsd
;;
convex-c32)
basic_machine=c32-convex
basic_os=bsd
;;
convex-c34)
basic_machine=c34-convex
basic_os=bsd
;;
convex-c38)
basic_machine=c38-convex
basic_os=bsd
;;
cray)
basic_machine=j90-cray
basic_os=unicos
;;
crds | unos)
basic_machine=m68k-crds
basic_os=
;;
da30)
basic_machine=m68k-da30
basic_os=
;;
decstation | pmax | pmin | dec3100 | decstatn)
basic_machine=mips-dec
basic_os=
;;
delta88)
basic_machine=m88k-motorola
basic_os=sysv3
;;
dicos)
basic_machine=i686-pc
basic_os=dicos
;;
djgpp)
basic_machine=i586-pc
basic_os=msdosdjgpp
;;
ebmon29k)
basic_machine=a29k-amd
basic_os=ebmon
;;
es1800 | OSE68k | ose68k | ose | OSE)
basic_machine=m68k-ericsson
basic_os=ose
;;
gmicro)
basic_machine=tron-gmicro
basic_os=sysv
;;
go32)
basic_machine=i386-pc
basic_os=go32
;;
h8300hms)
basic_machine=h8300-hitachi
basic_os=hms
;;
h8300xray)
basic_machine=h8300-hitachi
basic_os=xray
;;
h8500hms)
basic_machine=h8500-hitachi
basic_os=hms
;;
harris)
basic_machine=m88k-harris
basic_os=sysv3
;;
hp300 | hp300hpux)
basic_machine=m68k-hp
basic_os=hpux
;;
hp300bsd)
basic_machine=m68k-hp
basic_os=bsd
;;
hppaosf)
basic_machine=hppa1.1-hp
basic_os=osf
;;
hppro)
basic_machine=hppa1.1-hp
basic_os=proelf
;;
i386mach)
basic_machine=i386-mach
basic_os=mach
;;
isi68 | isi)
basic_machine=m68k-isi
basic_os=sysv
;;
m68knommu)
basic_machine=m68k-unknown
basic_os=linux
;;
magnum | m3230)
basic_machine=mips-mips
basic_os=sysv
;;
merlin)
basic_machine=ns32k-utek
basic_os=sysv
;;
mingw64)
basic_machine=x86_64-pc
basic_os=mingw64
;;
mingw32)
basic_machine=i686-pc
basic_os=mingw32
;;
mingw32ce)
basic_machine=arm-unknown
basic_os=mingw32ce
;;
monitor)
basic_machine=m68k-rom68k
basic_os=coff
;;
morphos)
basic_machine=powerpc-unknown
basic_os=morphos
;;
moxiebox)
basic_machine=moxie-unknown
basic_os=moxiebox
;;
msdos)
basic_machine=i386-pc
basic_os=msdos
;;
msys)
basic_machine=i686-pc
basic_os=msys
;;
mvs)
basic_machine=i370-ibm
basic_os=mvs
;;
nacl)
basic_machine=le32-unknown
basic_os=nacl
;;
ncr3000)
basic_machine=i486-ncr
basic_os=sysv4
;;
netbsd386)
basic_machine=i386-pc
basic_os=netbsd
;;
netwinder)
basic_machine=armv4l-rebel
basic_os=linux
;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
basic_os=newsos
;;
news1000)
basic_machine=m68030-sony
basic_os=newsos
;;
necv70)
basic_machine=v70-nec
basic_os=sysv
;;
nh3000)
basic_machine=m68k-harris
basic_os=cxux
;;
nh[45]000)
basic_machine=m88k-harris
basic_os=cxux
;;
nindy960)
basic_machine=i960-intel
basic_os=nindy
;;
mon960)
basic_machine=i960-intel
basic_os=mon960
;;
nonstopux)
basic_machine=mips-compaq
basic_os=nonstopux
;;
os400)
basic_machine=powerpc-ibm
basic_os=os400
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
basic_os=ose
;;
os68k)
basic_machine=m68k-none
basic_os=os68k
;;
paragon)
basic_machine=i860-intel
basic_os=osf
;;
parisc)
basic_machine=hppa-unknown
basic_os=linux
;;
psp)
basic_machine=mipsallegrexel-sony
basic_os=psp
;;
pw32)
basic_machine=i586-unknown
basic_os=pw32
;;
rdos | rdos64)
basic_machine=x86_64-pc
basic_os=rdos
;;
rdos32)
basic_machine=i386-pc
basic_os=rdos
;;
rom68k)
basic_machine=m68k-rom68k
basic_os=coff
;;
sa29200)
basic_machine=a29k-amd
basic_os=udi
;;
sei)
basic_machine=mips-sei
basic_os=seiux
;;
sequent)
basic_machine=i386-sequent
basic_os=
;;
sps7)
basic_machine=m68k-bull
basic_os=sysv2
;;
st2000)
basic_machine=m68k-tandem
basic_os=
;;
stratus)
basic_machine=i860-stratus
basic_os=sysv4
;;
sun2)
basic_machine=m68000-sun
basic_os=
;;
sun2os3)
basic_machine=m68000-sun
basic_os=sunos3
;;
sun2os4)
basic_machine=m68000-sun
basic_os=sunos4
;;
sun3)
basic_machine=m68k-sun
basic_os=
;;
sun3os3)
basic_machine=m68k-sun
basic_os=sunos3
;;
sun3os4)
basic_machine=m68k-sun
basic_os=sunos4
;;
sun4)
basic_machine=sparc-sun
basic_os=
;;
sun4os3)
basic_machine=sparc-sun
basic_os=sunos3
;;
sun4os4)
basic_machine=sparc-sun
basic_os=sunos4
;;
sun4sol2)
basic_machine=sparc-sun
basic_os=solaris2
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
basic_os=
;;
sv1)
basic_machine=sv1-cray
basic_os=unicos
;;
symmetry)
basic_machine=i386-sequent
basic_os=dynix
;;
t3e)
basic_machine=alphaev5-cray
basic_os=unicos
;;
t90)
basic_machine=t90-cray
basic_os=unicos
;;
toad1)
basic_machine=pdp10-xkl
basic_os=tops20
;;
tpf)
basic_machine=s390x-ibm
basic_os=tpf
;;
udi29k)
basic_machine=a29k-amd
basic_os=udi
;;
ultra3)
basic_machine=a29k-nyu
basic_os=sym1
;;
v810 | necv810)
basic_machine=v810-nec
basic_os=none
;;
vaxv)
basic_machine=vax-dec
basic_os=sysv
;;
vms)
basic_machine=vax-dec
basic_os=vms
;;
vsta)
basic_machine=i386-pc
basic_os=vsta
;;
vxworks960)
basic_machine=i960-wrs
basic_os=vxworks
;;
vxworks68)
basic_machine=m68k-wrs
basic_os=vxworks
;;
vxworks29k)
basic_machine=a29k-wrs
basic_os=vxworks
;;
xbox)
basic_machine=i686-pc
basic_os=mingw32
;;
ymp)
basic_machine=ymp-cray
basic_os=unicos
;;
*)
basic_machine=$1
basic_os=
;;
esac
;;
esac
# Decode 1-component or ad-hoc basic machines
case $basic_machine in
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
w89k)
cpu=hppa1.1
vendor=winbond
;;
op50n)
cpu=hppa1.1
vendor=oki
;;
op60c)
cpu=hppa1.1
vendor=oki
;;
ibm*)
cpu=i370
vendor=ibm
;;
orion105)
cpu=clipper
vendor=highlevel
;;
mac | mpw | mac-mpw)
cpu=m68k
vendor=apple
;;
pmac | pmac-mpw)
cpu=powerpc
vendor=apple
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
cpu=m68000
vendor=att
;;
3b*)
cpu=we32k
vendor=att
;;
bluegene*)
cpu=powerpc
vendor=ibm
basic_os=cnk
;;
decsystem10* | dec10*)
cpu=pdp10
vendor=dec
basic_os=tops10
;;
decsystem20* | dec20*)
cpu=pdp10
vendor=dec
basic_os=tops20
;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
cpu=m68k
vendor=motorola
;;
dpx2*)
cpu=m68k
vendor=bull
basic_os=sysv3
;;
encore | umax | mmax)
cpu=ns32k
vendor=encore
;;
elxsi)
cpu=elxsi
vendor=elxsi
basic_os=${basic_os:-bsd}
;;
fx2800)
cpu=i860
vendor=alliant
;;
genix)
cpu=ns32k
vendor=ns
;;
h3050r* | hiux*)
cpu=hppa1.1
vendor=hitachi
basic_os=hiuxwe2
;;
hp3k9[0-9][0-9] | hp9[0-9][0-9])
cpu=hppa1.0
vendor=hp
;;
hp9k2[0-9][0-9] | hp9k31[0-9])
cpu=m68000
vendor=hp
;;
hp9k3[2-9][0-9])
cpu=m68k
vendor=hp
;;
hp9k6[0-9][0-9] | hp6[0-9][0-9])
cpu=hppa1.0
vendor=hp
;;
hp9k7[0-79][0-9] | hp7[0-79][0-9])
cpu=hppa1.1
vendor=hp
;;
hp9k78[0-9] | hp78[0-9])
# FIXME: really hppa2.0-hp
cpu=hppa1.1
vendor=hp
;;
hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
# FIXME: really hppa2.0-hp
cpu=hppa1.1
vendor=hp
;;
hp9k8[0-9][13679] | hp8[0-9][13679])
cpu=hppa1.1
vendor=hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
cpu=hppa1.0
vendor=hp
;;
i*86v32)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=sysv32
;;
i*86v4*)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=sysv4
;;
i*86v)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=sysv
;;
i*86sol2)
cpu=`echo "$1" | sed -e 's/86.*/86/'`
vendor=pc
basic_os=solaris2
;;
j90 | j90-cray)
cpu=j90
vendor=cray
basic_os=${basic_os:-unicos}
;;
iris | iris4d)
cpu=mips
vendor=sgi
case $basic_os in
irix*)
;;
*)
basic_os=irix4
;;
esac
;;
miniframe)
cpu=m68000
vendor=convergent
;;
*mint | mint[0-9]* | *MiNT | *MiNT[0-9]*)
cpu=m68k
vendor=atari
basic_os=mint
;;
news-3600 | risc-news)
cpu=mips
vendor=sony
basic_os=newsos
;;
next | m*-next)
cpu=m68k
vendor=next
case $basic_os in
openstep*)
;;
nextstep*)
;;
ns2*)
basic_os=nextstep2
;;
*)
basic_os=nextstep3
;;
esac
;;
np1)
cpu=np1
vendor=gould
;;
op50n-* | op60c-*)
cpu=hppa1.1
vendor=oki
basic_os=proelf
;;
pa-hitachi)
cpu=hppa1.1
vendor=hitachi
basic_os=hiuxwe2
;;
pbd)
cpu=sparc
vendor=tti
;;
pbb)
cpu=m68k
vendor=tti
;;
pc532)
cpu=ns32k
vendor=pc532
;;
pn)
cpu=pn
vendor=gould
;;
power)
cpu=power
vendor=ibm
;;
ps2)
cpu=i386
vendor=ibm
;;
rm[46]00)
cpu=mips
vendor=siemens
;;
rtpc | rtpc-*)
cpu=romp
vendor=ibm
;;
sde)
cpu=mipsisa32
vendor=sde
basic_os=${basic_os:-elf}
;;
simso-wrs)
cpu=sparclite
vendor=wrs
basic_os=vxworks
;;
tower | tower-32)
cpu=m68k
vendor=ncr
;;
vpp*|vx|vx-*)
cpu=f301
vendor=fujitsu
;;
w65)
cpu=w65
vendor=wdc
;;
w89k-*)
cpu=hppa1.1
vendor=winbond
basic_os=proelf
;;
none)
cpu=none
vendor=none
;;
leon|leon[3-9])
cpu=sparc
vendor=$basic_machine
;;
leon-*|leon[3-9]-*)
cpu=sparc
vendor=`echo "$basic_machine" | sed 's/-.*//'`
;;
*-*)
# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read cpu vendor <&2
exit 1
;;
esac
;;
esac
# Here we canonicalize certain aliases for manufacturers.
case $vendor in
digital*)
vendor=dec
;;
commodore*)
vendor=cbm
;;
*)
;;
esac
# Decode manufacturer-specific aliases for certain operating systems.
if test x$basic_os != x
then
# First recognize some ad-hoc cases, or perhaps split kernel-os, or else just
# set os.
case $basic_os in
gnu/linux*)
kernel=linux
os=`echo "$basic_os" | sed -e 's|gnu/linux|gnu|'`
;;
os2-emx)
kernel=os2
os=`echo "$basic_os" | sed -e 's|os2-emx|emx|'`
;;
nto-qnx*)
kernel=nto
os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'`
;;
*-*)
# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read kernel os <&2
exit 1
;;
esac
# As a final step for OS-related things, validate the OS-kernel combination
# (given a valid OS), if there is a kernel.
case $kernel-$os in
linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* \
| linux-musl* | linux-relibc* | linux-uclibc* )
;;
uclinux-uclibc* )
;;
-dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* )
# These are just libc implementations, not actual OSes, and thus
# require a kernel.
echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2
exit 1
;;
kfreebsd*-gnu* | kopensolaris*-gnu*)
;;
vxworks-simlinux | vxworks-simwindows | vxworks-spe)
;;
nto-qnx*)
;;
os2-emx)
;;
*-eabi* | *-gnueabi*)
;;
-*)
# Blank kernel with real OS is always fine.
;;
*-*)
echo "Invalid configuration \`$1': Kernel \`$kernel' not known to work with OS \`$os'." 1>&2
exit 1
;;
esac
# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer. We pick the logical manufacturer.
case $vendor in
unknown)
case $cpu-$os in
*-riscix*)
vendor=acorn
;;
*-sunos*)
vendor=sun
;;
*-cnk* | *-aix*)
vendor=ibm
;;
*-beos*)
vendor=be
;;
*-hpux*)
vendor=hp
;;
*-mpeix*)
vendor=hp
;;
*-hiux*)
vendor=hitachi
;;
*-unos*)
vendor=crds
;;
*-dgux*)
vendor=dg
;;
*-luna*)
vendor=omron
;;
*-genix*)
vendor=ns
;;
*-clix*)
vendor=intergraph
;;
*-mvs* | *-opened*)
vendor=ibm
;;
*-os400*)
vendor=ibm
;;
s390-* | s390x-*)
vendor=ibm
;;
*-ptx*)
vendor=sequent
;;
*-tpf*)
vendor=ibm
;;
*-vxsim* | *-vxworks* | *-windiss*)
vendor=wrs
;;
*-aux*)
vendor=apple
;;
*-hms*)
vendor=hitachi
;;
*-mpw* | *-macos*)
vendor=apple
;;
*-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*)
vendor=atari
;;
*-vos*)
vendor=stratus
;;
esac
;;
esac
echo "$cpu-$vendor-${kernel:+$kernel-}$os"
exit
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
binfmt-support-2.2.2/build-aux/depcomp 0000755 0000000 0000000 00000056020 14246242165 014655 0000000 0000000 #! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1999-2022 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva .
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by 'PROGRAMS ARGS'.
object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
# Get the directory component of the given path, and save it in the
# global variables '$dir'. Note that this directory component will
# be either empty or ending with a '/' character. This is deliberate.
set_dir_from ()
{
case $1 in
*/*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
*) dir=;;
esac
}
# Get the suffix-stripped basename of the given path, and save it the
# global variable '$base'.
set_base_from ()
{
base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
}
# If no dependency file was actually created by the compiler invocation,
# we still have to create a dummy depfile, to avoid errors with the
# Makefile "include basename.Plo" scheme.
make_dummy_depfile ()
{
echo "#dummy" > "$depfile"
}
# Factor out some common post-processing of the generated depfile.
# Requires the auxiliary global variable '$tmpdepfile' to be set.
aix_post_process_depfile ()
{
# If the compiler actually managed to produce a dependency file,
# post-process it.
if test -f "$tmpdepfile"; then
# Each line is of the form 'foo.o: dependency.h'.
# Do two passes, one to just change these to
# $object: dependency.h
# and one to simply output
# dependency.h:
# which is needed to avoid the deleted-header problem.
{ sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
} > "$depfile"
rm -f "$tmpdepfile"
else
make_dummy_depfile
fi
}
# A tabulation character.
tab=' '
# A newline character.
nl='
'
# Character ranges might be problematic outside the C locale.
# These definitions help.
upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
lower=abcdefghijklmnopqrstuvwxyz
digits=0123456789
alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Avoid interferences from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
# This is just like msvc7 but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvc7
fi
if test "$depmode" = xlc; then
# IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
gccflag=-qmakedep=gcc,-MF
depmode=gcc
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say). Also, it might not be
## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The second -e expression handles DOS-style file names with drive
# letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
| tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
aix_post_process_depfile
;;
tcc)
# tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
# FIXME: That version still under development at the moment of writing.
# Make that this statement remains true also for stable, released
# versions.
# It will wrap lines (doesn't matter whether long or short) with a
# trailing '\', as in:
#
# foo.o : \
# foo.c \
# foo.h \
#
# It will put a trailing '\' even on the last line, and will use leading
# spaces rather than leading tabs (at least since its commit 0394caf7
# "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
# We have to change lines of the first kind to '$object: \'.
sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
# And for each line of the second kind, we have to emit a 'dep.h:'
# dummy dependency, to avoid the deleted-header problem.
sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file. A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
# Portland's C compiler understands '-MD'.
# Will always output deps to 'file.d' where file is the root name of the
# source file under compilation, even if file resides in a subdirectory.
# The object file name does not affect the name of the '.d' file.
# pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
set_base_from "$source"
tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
lockdir=$base.d-lock
trap "
echo '$0: caught signal, cleaning up...' >&2
rmdir '$lockdir'
exit 1
" 1 2 13 15
numtries=100
i=$numtries
while test $i -gt 0; do
# mkdir is a portable test-and-set.
if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
rmdir "$lockdir"
break
else
# If the lock is being held by a different process, wait
# until the winning process is done or we timeout.
while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
fi
i=`expr $i - 1`
done
trap - 1 2 13 15
if test $i -le 0; then
echo "$0: failed to acquire lock after $numtries attempts" >&2
echo "$0: check lockdir '$lockdir'" >&2
exit 1
fi
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
# Libtool generates 2 separate objects for the 2 libraries. These
# two compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir$base.o.d # libtool 1.5
tmpdepfile2=$dir.libs/$base.o.d # Likewise.
tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
# Same post-processing that is required for AIX mode.
aix_post_process_depfile
;;
msvc7)
if test "$libtool" = yes; then
showIncludes=-Wc,-showIncludes
else
showIncludes=-showIncludes
fi
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The first sed program below extracts the file names and escapes
# backslashes for cygpath. The second sed program outputs the file
# name when reading, but also accumulates all include files in the
# hold buffer in order to output them again at the end. This only
# works with sed implementations that can handle large buffers.
sed < "$tmpdepfile" -n '
/^Note: including file: *\(.*\)/ {
s//\1/
s/\\/\\\\/g
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
s/.*/'"$tab"'/
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
msvc7msys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this sed invocation
# correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process the last invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed '1,2d' "$tmpdepfile" \
| tr ' ' "$nl" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E \
| sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
| sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
binfmt-support-2.2.2/build-aux/gitlog-to-changelog 0000755 0000000 0000000 00000040260 14246242200 017045 0000000 0000000 #!/bin/sh
#! -*-perl-*-
# Convert git log output to ChangeLog format.
# Copyright (C) 2008-2022 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
#
# Written by Jim Meyering
# This is a prologue that allows to run a perl script as an executable
# on systems that are compliant to a POSIX version before POSIX:2017.
# On such systems, the usual invocation of an executable through execlp()
# or execvp() fails with ENOEXEC if it is a script that does not start
# with a #! line. The script interpreter mentioned in the #! line has
# to be /bin/sh, because on GuixSD systems that is the only program that
# has a fixed file name. The second line is essential for perl and is
# also useful for editing this file in Emacs. The next two lines below
# are valid code in both sh and perl. When executed by sh, they re-execute
# the script through the perl program found in $PATH. The '-x' option
# is essential as well; without it, perl would re-execute the script
# through /bin/sh. When executed by perl, the next two lines are a no-op.
eval 'exec perl -wSx "$0" "$@"'
if 0;
my $VERSION = '2021-02-24 23:42'; # UTC
# The definition above must lie within the first 8 lines in order
# for the Emacs time-stamp write hook (at end) to update it.
# If you change this file with Emacs, please let the write hook
# do its job. Otherwise, update this string manually.
use strict;
use warnings;
use Getopt::Long;
use POSIX qw(strftime);
(my $ME = $0) =~ s|.*/||;
# use File::Coda; # https://meyering.net/code/Coda/
END {
defined fileno STDOUT or return;
close STDOUT and return;
warn "$ME: failed to close standard output: $!\n";
$? ||= 1;
}
sub usage ($)
{
my ($exit_code) = @_;
my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR);
if ($exit_code != 0)
{
print $STREAM "Try '$ME --help' for more information.\n";
}
else
{
print $STREAM < ChangeLog
$ME -- -n 5 foo > last-5-commits-to-branch-foo
SPECIAL SYNTAX:
The following types of strings are interpreted specially when they appear
at the beginning of a log message line. They are not copied to the output.
Copyright-paperwork-exempt: Yes
Append the "(tiny change)" notation to the usual "date name email"
ChangeLog header to mark a change that does not require a copyright
assignment.
Co-authored-by: Joe User
List the specified name and email address on a second
ChangeLog header, denoting a co-author.
Signed-off-by: Joe User
These lines are simply elided.
In a FILE specified via --amend, comment lines (starting with "#") are ignored.
FILE must consist of pairs where SHA is a 40-byte SHA1 (alone on
a line) referring to a commit in the current project, and CODE refers to one
or more consecutive lines of Perl code. Pairs must be separated by one or
more blank line.
Here is sample input for use with --amend=FILE, from coreutils:
3a169f4c5d9159283548178668d2fae6fced3030
# fix typo in title:
s/all tile types/all file types/
1379ed974f1fa39b12e2ffab18b3f7a607082202
# Due to a bug in vc-dwim, I mis-attributed a patch by Paul to myself.
# Change the author to be Paul. Note the escaped "@":
s,Jim .*>,Paul Eggert ,
EOF
}
exit $exit_code;
}
# If the string $S is a well-behaved file name, simply return it.
# If it contains white space, quotes, etc., quote it, and return the new string.
sub shell_quote($)
{
my ($s) = @_;
if ($s =~ m![^\w+/.,-]!)
{
# Convert each single quote to '\''
$s =~ s/\'/\'\\\'\'/g;
# Then single quote the string.
$s = "'$s'";
}
return $s;
}
sub quoted_cmd(@)
{
return join (' ', map {shell_quote $_} @_);
}
# Parse file F.
# Comment lines (starting with "#") are ignored.
# F must consist of pairs where SHA is a 40-byte SHA1
# (alone on a line) referring to a commit in the current project, and
# CODE refers to one or more consecutive lines of Perl code.
# Pairs must be separated by one or more blank line.
sub parse_amend_file($)
{
my ($f) = @_;
open F, '<', $f
or die "$ME: $f: failed to open for reading: $!\n";
my $fail;
my $h = {};
my $in_code = 0;
my $sha;
while (defined (my $line = ))
{
$line =~ /^\#/
and next;
chomp $line;
$line eq ''
and $in_code = 0, next;
if (!$in_code)
{
$line =~ /^([[:xdigit:]]{40})$/
or (warn "$ME: $f:$.: invalid line; expected an SHA1\n"),
$fail = 1, next;
$sha = lc $1;
$in_code = 1;
exists $h->{$sha}
and (warn "$ME: $f:$.: duplicate SHA1\n"),
$fail = 1, next;
}
else
{
$h->{$sha} ||= '';
$h->{$sha} .= "$line\n";
}
}
close F;
$fail
and exit 1;
return $h;
}
# git_dir_option $SRCDIR
#
# From $SRCDIR, the --git-dir option to pass to git (none if $SRCDIR
# is undef). Return as a list (0 or 1 element).
sub git_dir_option($)
{
my ($srcdir) = @_;
my @res = ();
if (defined $srcdir)
{
my $qdir = shell_quote $srcdir;
my $cmd = "cd $qdir && git rev-parse --show-toplevel";
my $qcmd = shell_quote $cmd;
my $git_dir = qx($cmd);
defined $git_dir
or die "$ME: cannot run $qcmd: $!\n";
$? == 0
or die "$ME: $qcmd had unexpected exit code or signal ($?)\n";
chomp $git_dir;
push @res, "--git-dir=$git_dir/.git";
}
@res;
}
{
my $since_date;
my $until_date;
my $format_string = '%s%n%b%n';
my $amend_file;
my $append_dot = 0;
my $cluster = 1;
my $ignore_matching;
my $ignore_line;
my $strip_tab = 0;
my $strip_cherry_pick = 0;
my $srcdir;
GetOptions
(
help => sub { usage 0 },
version => sub { print "$ME version $VERSION\n"; exit },
'since=s' => \$since_date,
'until=s' => \$until_date,
'format=s' => \$format_string,
'amend=s' => \$amend_file,
'append-dot' => \$append_dot,
'cluster!' => \$cluster,
'ignore-matching=s' => \$ignore_matching,
'ignore-line=s' => \$ignore_line,
'strip-tab' => \$strip_tab,
'strip-cherry-pick' => \$strip_cherry_pick,
'srcdir=s' => \$srcdir,
) or usage 1;
defined $since_date
and unshift @ARGV, "--since=$since_date";
defined $until_date
and unshift @ARGV, "--until=$until_date";
# This is a hash that maps an SHA1 to perl code (i.e., s/old/new/)
# that makes a correction in the log or attribution of that commit.
my $amend_code = defined $amend_file ? parse_amend_file $amend_file : {};
my @cmd = ('git',
git_dir_option $srcdir,
qw(log --log-size),
'--pretty=format:%H:%ct %an <%ae>%n%n'.$format_string, @ARGV);
open PIPE, '-|', @cmd
or die ("$ME: failed to run '". quoted_cmd (@cmd) ."': $!\n"
. "(Is your Git too old? Version 1.5.1 or later is required.)\n");
my $prev_multi_paragraph;
my $prev_date_line = '';
my @prev_coauthors = ();
my @skipshas = ();
while (1)
{
defined (my $in = )
or last;
$in =~ /^log size (\d+)$/
or die "$ME:$.: Invalid line (expected log size):\n$in";
my $log_nbytes = $1;
my $log;
my $n_read = read PIPE, $log, $log_nbytes;
$n_read == $log_nbytes
or die "$ME:$.: unexpected EOF\n";
# Extract leading hash.
my ($sha, $rest) = split ':', $log, 2;
defined $sha
or die "$ME:$.: malformed log entry\n";
$sha =~ /^[[:xdigit:]]{40}$/
or die "$ME:$.: invalid SHA1: $sha\n";
my $skipflag = 0;
if (@skipshas)
{
foreach(@skipshas)
{
if ($sha =~ /^$_/)
{
$skipflag = $_;
last;
}
}
}
# If this commit's log requires any transformation, do it now.
my $code = $amend_code->{$sha};
if (defined $code)
{
eval 'use Safe';
my $s = new Safe;
# Put the unpreprocessed entry into "$_".
$_ = $rest;
# Let $code operate on it, safely.
my $r = $s->reval("$code")
or die "$ME:$.:$sha: failed to eval \"$code\":\n$@\n";
# Note that we've used this entry.
delete $amend_code->{$sha};
# Update $rest upon success.
$rest = $_;
}
# Remove lines inserted by "git cherry-pick".
if ($strip_cherry_pick)
{
$rest =~ s/^\s*Conflicts:\n.*//sm;
$rest =~ s/^\s*\(cherry picked from commit [\da-f]+\)\n//m;
}
my @line = split /[ \t]*\n/, $rest;
my $author_line = shift @line;
defined $author_line
or die "$ME:$.: unexpected EOF\n";
$author_line =~ /^(\d+) (.*>)$/
or die "$ME:$.: Invalid line "
. "(expected date/author/email):\n$author_line\n";
# Format 'Copyright-paperwork-exempt: Yes' as a standard ChangeLog
# `(tiny change)' annotation.
my $tiny = (grep (/^(?:Copyright-paperwork-exempt|Tiny-change):\s+[Yy]es$/, @line)
? ' (tiny change)' : '');
my $date_line = sprintf "%s %s$tiny\n",
strftime ("%Y-%m-%d", localtime ($1)), $2;
my @coauthors = grep /^Co-authored-by:.*$/, @line;
# Omit meta-data lines we've already interpreted.
@line = grep !/^(?:Signed-off-by:[ ].*>$
|Co-authored-by:[ ]
|Copyright-paperwork-exempt:[ ]
|Tiny-change:[ ]
)/x, @line;
# Remove leading and trailing blank lines.
if (@line)
{
while ($line[0] =~ /^\s*$/) { shift @line; }
while ($line[$#line] =~ /^\s*$/) { pop @line; }
}
# Handle Emacs gitmerge.el "skipped" commits.
# Yes, this should be controlled by an option. So sue me.
if ( grep /^(; )?Merge from /, @line )
{
my $found = 0;
foreach (@line)
{
if (grep /^The following commit.*skipped:$/, $_)
{
$found = 1;
## Reset at each merge to reduce chance of false matches.
@skipshas = ();
next;
}
if ($found && $_ =~ /^([[:xdigit:]]{7,}) [^ ]/)
{
push ( @skipshas, $1 );
}
}
}
# Ignore commits that match the --ignore-matching pattern, if specified.
if (defined $ignore_matching && @line && $line[0] =~ /$ignore_matching/)
{
$skipflag = 1;
}
elsif ($skipflag)
{
## Perhaps only warn if a pattern matches more than once?
warn "$ME: warning: skipping $sha due to $skipflag\n";
}
if (! $skipflag)
{
if (defined $ignore_line && @line)
{
@line = grep ! /$ignore_line/, @line;
while ($line[$#line] =~ /^\s*$/) { pop @line; }
}
# Record whether there are two or more paragraphs.
my $multi_paragraph = grep /^\s*$/, @line;
# Format 'Co-authored-by: A U Thor ' lines in
# standard multi-author ChangeLog format.
for (@coauthors)
{
s/^Co-authored-by:\s*/\t /;
s/\s* ;
/<.*?@.*\..*>/
or warn "$ME: warning: missing email address for "
. substr ($_, 5) . "\n";
}
# If clustering of commit messages has been disabled, if this header
# would be different from the previous date/name/etc. header,
# or if this or the previous entry consists of two or more paragraphs,
# then print the header.
if ( ! $cluster
|| $date_line ne $prev_date_line
|| "@coauthors" ne "@prev_coauthors"
|| $multi_paragraph
|| $prev_multi_paragraph)
{
$prev_date_line eq ''
or print "\n";
print $date_line;
@coauthors
and print join ("\n", @coauthors), "\n";
}
$prev_date_line = $date_line;
@prev_coauthors = @coauthors;
$prev_multi_paragraph = $multi_paragraph;
# If there were any lines
if (@line == 0)
{
warn "$ME: warning: empty commit message:\n"
. " commit $sha\n $date_line\n";
}
else
{
if ($append_dot)
{
# If the first line of the message has enough room, then
if (length $line[0] < 72)
{
# append a dot if there is no other punctuation or blank
# at the end.
$line[0] =~ /[[:punct:]\s]$/
or $line[0] .= '.';
}
}
# Remove one additional leading TAB from each line.
$strip_tab
and map { s/^\t// } @line;
# Prefix each non-empty line with a TAB.
@line = map { length $_ ? "\t$_" : '' } @line;
print "\n", join ("\n", @line), "\n";
}
}
defined ($in = )
or last;
$in ne "\n"
and die "$ME:$.: unexpected line:\n$in";
}
close PIPE
or die "$ME: error closing pipe from " . quoted_cmd (@cmd) . "\n";
# FIXME-someday: include $PROCESS_STATUS in the diagnostic
# Complain about any unused entry in the --amend=F specified file.
my $fail = 0;
foreach my $sha (keys %$amend_code)
{
warn "$ME:$amend_file: unused entry: $sha\n";
$fail = 1;
}
exit $fail;
}
# Local Variables:
# mode: perl
# indent-tabs-mode: nil
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-line-limit: 50
# time-stamp-start: "my $VERSION = '"
# time-stamp-format: "%:y-%02m-%02d %02H:%02M"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "'; # UTC"
# End:
binfmt-support-2.2.2/build-aux/gnupload 0000755 0000000 0000000 00000032666 14246242200 015037 0000000 0000000 #!/bin/sh
# Sign files and upload them.
scriptversion=2021-04-11.09; # UTC
# Copyright (C) 2004-2022 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Originally written by Alexandre Duret-Lutz .
# The master copy of this file is maintained in the gnulib Git repository.
# Please send bug reports and feature requests to bug-gnulib@gnu.org.
set -e
GPG=gpg
# Choose the proper version of gpg, so as to avoid a
# "gpg-agent is not available in this session" error
# when gpg-agent is version 2 but gpg is still version 1.
# FIXME-2020: remove, once all major distros ship gpg version 2 as /usr/bin/gpg
gpg_agent_version=`(gpg-agent --version) 2>/dev/null | sed -e '2,$d' -e 's/^[^0-9]*//'`
case "$gpg_agent_version" in
2.*)
gpg_version=`(gpg --version) 2>/dev/null | sed -e '2,$d' -e 's/^[^0-9]*//'`
case "$gpg_version" in
1.*)
if (type gpg2) >/dev/null 2>/dev/null; then
# gpg2 is present.
GPG=gpg2
else
# gpg2 is missing. Ubuntu users should install the package 'gnupg2'.
echo "WARNING: Using 'gpg', which is too old. You should install 'gpg2'." 1>&2
fi
;;
esac
;;
esac
GPG="${GPG} --batch --no-tty"
conffile=.gnuploadrc
to=
dry_run=false
replace=
symlink_files=
delete_files=
delete_symlinks=
collect_var=
dbg=
nl='
'
usage="Usage: $0 [OPTION]... [CMD] FILE... [[CMD] FILE...]
Sign all FILES, and process them at the destinations specified with --to.
If CMD is not given, it defaults to uploading. See examples below.
Commands:
--delete delete FILES from destination
--symlink create symbolic links
--rmsymlink remove symbolic links
-- treat the remaining arguments as files to upload
Options:
--to DEST specify a destination DEST for FILES
(multiple --to options are allowed)
--user NAME sign with key NAME
--replace allow replacements of existing files
--symlink-regex[=EXPR] use sed script EXPR to compute symbolic link names
-n, --dry-run do nothing, show what would have been done
(including the constructed directive file)
--version output version information and exit
-h, --help print this help text and exit
If --symlink-regex is given without EXPR, then the link target name
is created by replacing the version information with '-latest', e.g.:
foo-1.3.4.tar.gz -> foo-latest.tar.gz
Recognized destinations are:
alpha.gnu.org:DIRECTORY
savannah.gnu.org:DIRECTORY
savannah.nongnu.org:DIRECTORY
ftp.gnu.org:DIRECTORY
build directive files and upload files by FTP
download.gnu.org.ua:{alpha|ftp}/DIRECTORY
build directive files and upload files by SFTP
[user@]host:DIRECTORY upload files with scp
Options and commands are applied in order. If the file $conffile exists
in the current working directory, its contents are prepended to the
actual command line options. Use this to keep your defaults. Comments
(#) and empty lines in $conffile are allowed.
gives some further background.
Examples:
1. Upload foobar-1.0.tar.gz to ftp.gnu.org:
gnupload --to ftp.gnu.org:foobar foobar-1.0.tar.gz
2. Upload foobar-1.0.tar.gz and foobar-1.0.tar.xz to ftp.gnu.org:
gnupload --to ftp.gnu.org:foobar foobar-1.0.tar.gz foobar-1.0.tar.xz
3. Same as above, and also create symbolic links to foobar-latest.tar.*:
gnupload --to ftp.gnu.org:foobar \\
--symlink-regex \\
foobar-1.0.tar.gz foobar-1.0.tar.xz
4. Create a symbolic link foobar-latest.tar.gz -> foobar-1.0.tar.gz
and likewise for the corresponding .sig file:
gnupload --to ftp.gnu.org:foobar \\
--symlink foobar-1.0.tar.gz foobar-latest.tar.gz \\
foobar-1.0.tar.gz.sig foobar-latest.tar.gz.sig
or (equivalent):
gnupload --to ftp.gnu.org:foobar \\
--symlink foobar-1.0.tar.gz foobar-latest.tar.gz \\
--symlink foobar-1.0.tar.gz.sig foobar-latest.tar.gz.sig
5. Upload foobar-0.9.90.tar.gz to two sites:
gnupload --to alpha.gnu.org:foobar \\
--to sources.redhat.com:~ftp/pub/foobar \\
foobar-0.9.90.tar.gz
6. Delete oopsbar-0.9.91.tar.gz and upload foobar-0.9.91.tar.gz
(the -- terminates the list of files to delete):
gnupload --to alpha.gnu.org:foobar \\
--to sources.redhat.com:~ftp/pub/foobar \\
--delete oopsbar-0.9.91.tar.gz \\
-- foobar-0.9.91.tar.gz
gnupload executes a program ncftpput to do the transfers; if you don't
happen to have an ncftp package installed, the ncftpput-ftp script in
the build-aux/ directory of the gnulib package
(https://savannah.gnu.org/projects/gnulib) may serve as a replacement.
Send patches and bug reports to ."
copyright_year=`echo "$scriptversion" | sed -e 's/[^0-9].*//'`
copyright="Copyright (C) ${copyright_year} Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later .
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law."
# Read local configuration file
if test -r "$conffile"; then
echo "$0: Reading configuration file $conffile"
conf=`sed 's/#.*$//;/^$/d' "$conffile" | tr "\015$nl" ' '`
eval set x "$conf \"\$@\""
shift
fi
while test -n "$1"; do
case $1 in
-*)
collect_var=
case $1 in
-h | --help)
echo "$usage"
exit $?
;;
--to)
if test -z "$2"; then
echo "$0: Missing argument for --to" 1>&2
exit 1
elif echo "$2" | grep 'ftp-upload\.gnu\.org' >/dev/null; then
echo "$0: Use ftp.gnu.org:PKGNAME or alpha.gnu.org:PKGNAME" >&2
echo "$0: for the destination, not ftp-upload.gnu.org (which" >&2
echo "$0: is used for direct ftp uploads, not with gnupload)." >&2
echo "$0: See --help and its examples if need be." >&2
exit 1
else
to="$to $2"
shift
fi
;;
--user)
if test -z "$2"; then
echo "$0: Missing argument for --user" 1>&2
exit 1
else
GPG="$GPG --local-user $2"
shift
fi
;;
--delete)
collect_var=delete_files
;;
--replace)
replace="replace: true"
;;
--rmsymlink)
collect_var=delete_symlinks
;;
--symlink-regex=*)
symlink_expr=`expr "$1" : '[^=]*=\(.*\)'`
;;
--symlink-regex)
symlink_expr='s|-[0-9][0-9\.]*\(-[0-9][0-9]*\)\{0,1\}\.|-latest.|'
;;
--symlink)
collect_var=symlink_files
;;
-n | --dry-run)
dry_run=:
;;
--version)
echo "gnupload $scriptversion"
echo "$copyright"
exit 0
;;
--)
shift
break
;;
-*)
echo "$0: Unknown option '$1', try '$0 --help'" 1>&2
exit 1
;;
esac
;;
*)
if test -z "$collect_var"; then
break
else
eval "$collect_var=\"\$$collect_var $1\""
fi
;;
esac
shift
done
dprint()
{
echo "Running $* ..."
}
if $dry_run; then
dbg=dprint
fi
if test -z "$to"; then
echo "$0: Missing destination sites" >&2
exit 1
fi
if test -n "$symlink_files"; then
x=`echo "$symlink_files" | sed 's/[^ ]//g;s/ //g'`
if test -n "$x"; then
echo "$0: Odd number of symlink arguments" >&2
exit 1
fi
fi
if test $# = 0; then
if test -z "${symlink_files}${delete_files}${delete_symlinks}"; then
echo "$0: No file to upload" 1>&2
exit 1
fi
else
# Make sure all files exist. We don't want to ask
# for the passphrase if the script will fail.
for file
do
if test ! -f $file; then
echo "$0: Cannot find '$file'" 1>&2
exit 1
elif test -n "$symlink_expr"; then
linkname=`echo $file | sed "$symlink_expr"`
if test -z "$linkname"; then
echo "$0: symlink expression produces empty results" >&2
exit 1
elif test "$linkname" = $file; then
echo "$0: symlink expression does not alter file name" >&2
exit 1
fi
fi
done
fi
# Make sure passphrase is not exported in the environment.
unset passphrase
unset passphrase_fd_0
GNUPGHOME=${GNUPGHOME:-$HOME/.gnupg}
# Reset PATH to be sure that echo is a built-in. We will later use
# 'echo $passphrase' to output the passphrase, so it is important that
# it is a built-in (third-party programs tend to appear in 'ps'
# listings with their arguments...).
# Remember this script runs with 'set -e', so if echo is not built-in
# it will exit now.
if $dry_run || grep -q "^use-agent" $GNUPGHOME/gpg.conf; then :; else
PATH=/empty echo -n "Enter GPG passphrase: "
stty -echo
read -r passphrase
stty echo
echo
passphrase_fd_0="--passphrase-fd 0"
fi
if test $# -ne 0; then
for file
do
echo "Signing $file ..."
rm -f $file.sig
echo "$passphrase" | $dbg $GPG $passphrase_fd_0 -ba -o $file.sig $file
done
fi
# mkdirective DESTDIR BASE FILE STMT
# Arguments: See upload, below
mkdirective ()
{
stmt="$4"
if test -n "$3"; then
stmt="
filename: $3$stmt"
fi
cat >${2}.directive<&2
fi
$dbg ncftpput savannah.gnu.org /incoming/savannah/$destdir $files
;;
savannah.nongnu.org:*)
if test -z "$files"; then
echo "$0: warning: standalone directives not applicable for $dest" >&2
fi
$dbg ncftpput savannah.nongnu.org /incoming/savannah/$destdir $files
;;
download.gnu.org.ua:alpha/*|download.gnu.org.ua:ftp/*)
destdir_p1=`echo "$destdir" | sed 's,^[^/]*/,,'`
destdir_topdir=`echo "$destdir" | sed 's,/.*,,'`
mkdirective "$destdir_p1" "$base" "$file" "$stmt"
echo "$passphrase" | $dbg $GPG $passphrase_fd_0 --clearsign $base.directive
for f in $files $base.directive.asc
do
echo put $f
done | $dbg sftp -b - puszcza.gnu.org.ua:/incoming/$destdir_topdir
;;
/*)
dest_host=`echo "$dest" | sed 's,:.*,,'`
mkdirective "$destdir" "$base" "$file" "$stmt"
echo "$passphrase" | $dbg $GPG $passphrase_fd_0 --clearsign $base.directive
$dbg cp $files $base.directive.asc $dest_host
;;
*)
if test -z "$files"; then
echo "$0: warning: standalone directives not applicable for $dest" >&2
fi
$dbg scp $files $dest
;;
esac
rm -f $base.directive $base.directive.asc
}
#####
# Process any standalone directives
stmt=
if test -n "$symlink_files"; then
stmt="$stmt
`mksymlink $symlink_files`"
fi
for file in $delete_files
do
stmt="$stmt
archive: $file"
done
for file in $delete_symlinks
do
stmt="$stmt
rmsymlink: $file"
done
if test -n "$stmt"; then
for dest in $to
do
destdir=`echo $dest | sed 's/[^:]*://'`
upload "$dest" "$destdir" "`hostname`-$$" "" "$stmt"
done
fi
# Process actual uploads
for dest in $to
do
for file
do
echo "Uploading $file to $dest ..."
stmt=
#
# allowing file replacement is all or nothing.
if test -n "$replace"; then stmt="$stmt
$replace"
fi
#
files="$file $file.sig"
destdir=`echo $dest | sed 's/[^:]*://'`
if test -n "$symlink_expr"; then
linkname=`echo $file | sed "$symlink_expr"`
stmt="$stmt
symlink: $file $linkname
symlink: $file.sig $linkname.sig"
fi
upload "$dest" "$destdir" "$file" "$file" "$stmt" "$files"
done
done
exit 0
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
binfmt-support-2.2.2/build-aux/install-sh 0000755 0000000 0000000 00000035776 14246242217 015321 0000000 0000000 #!/bin/sh
# install - install a program, script, or datafile
scriptversion=2020-11-14.01; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
tab=' '
nl='
'
IFS=" $tab$nl"
# Set DOITPROG to "echo" to test this script.
doit=${DOITPROG-}
doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_mkdir=
# Desired mode of installed file.
mode=0755
# Create dirs (including intermediate dirs) using mode 755.
# This is like GNU 'install' as of coreutils 8.32 (2020).
mkdir_umask=22
backupsuffix=
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-p pass -p to $cpprog.
-s $stripprog installed files.
-S SUFFIX attempt to back up existing files, with suffix SUFFIX.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
By default, rm is invoked with -f; when overridden with RMPROG,
it's up to you to specify -f if you want it.
If -S is not specified, no backups are attempted.
Email bug reports to bug-automake@gnu.org.
Automake home page: https://www.gnu.org/software/automake/
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-p) cpprog="$cpprog -p";;
-s) stripcmd=$stripprog;;
-S) backupsuffix="$2"
shift;;
-t)
is_target_a_directory=always
dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
# We allow the use of options -d and -T together, by making -d
# take the precedence; this is for compatibility with GNU install.
if test -n "$dir_arg"; then
if test -n "$dst_arg"; then
echo "$0: target directory not allowed when installing a directory." >&2
exit 1
fi
fi
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
if test $# -gt 1 || test "$is_target_a_directory" = always; then
if test ! -d "$dst_arg"; then
echo "$0: $dst_arg: Is not a directory." >&2
exit 1
fi
fi
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
# Don't chown directories that already exist.
if test $dstdir_status = 0; then
chowncmd=""
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# If destination is a directory, append the input filename.
if test -d "$dst"; then
if test "$is_target_a_directory" = never; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dstbase=`basename "$src"`
case $dst in
*/) dst=$dst$dstbase;;
*) dst=$dst/$dstbase;;
esac
dstdir_status=0
else
dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
case $dstdir in
*/) dstdirslash=$dstdir;;
*) dstdirslash=$dstdir/;;
esac
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
# The $RANDOM variable is not portable (e.g., dash). Use it
# here however when possible just to lower collision chance.
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap '
ret=$?
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
exit $ret
' 0
# Because "mkdir -p" follows existing symlinks and we likely work
# directly in world-writeable /tmp, make sure that the '$tmpdir'
# directory is successfully created first before we actually test
# 'mkdir -p'.
if (umask $mkdir_umask &&
$mkdirprog $mkdir_mode "$tmpdir" &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
test_tmpdir="$tmpdir/a"
ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
trap '' 0;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
esac
oIFS=$IFS
IFS=/
set -f
set fnord $dstdir
shift
set +f
IFS=$oIFS
prefixes=
for d
do
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=${dstdirslash}_inst.$$_
rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask &&
{ test -z "$stripcmd" || {
# Create $dsttmp read-write so that cp doesn't create it read-only,
# which would cause strip to fail.
if test -z "$doit"; then
: >"$dsttmp" # No need to fork-exec 'touch'.
else
$doit touch "$dsttmp"
fi
}
} &&
$doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# If $backupsuffix is set, and the file being installed
# already exists, attempt a backup. Don't worry if it fails,
# e.g., if mv doesn't support -f.
if test -n "$backupsuffix" && test -f "$dst"; then
$doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
fi
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
binfmt-support-2.2.2/build-aux/missing 0000755 0000000 0000000 00000015336 14246242217 014702 0000000 0000000 #! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
case $1 in
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
Supported PROGRAM values:
aclocal autoconf autoheader autom4te automake makeinfo
bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to ."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
perl_URL=https://www.perl.org/
flex_URL=https://github.com/westes/flex
gnu_software_URL=https://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
binfmt-support-2.2.2/build-aux/test-driver 0000755 0000000 0000000 00000011417 14246242220 015467 0000000 0000000 #! /bin/sh
# test-driver - basic testsuite driver script.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 2011-2021 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
# Make unconditional expansion of undefined variables an error. This
# helps a lot in preventing typo-related bugs.
set -u
usage_error ()
{
echo "$0: $*" >&2
print_usage >&2
exit 2
}
print_usage ()
{
cat <"$log_file"
"$@" >>"$log_file" 2>&1
estatus=$?
if test $enable_hard_errors = no && test $estatus -eq 99; then
tweaked_estatus=1
else
tweaked_estatus=$estatus
fi
case $tweaked_estatus:$expect_failure in
0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
0:*) col=$grn res=PASS recheck=no gcopy=no;;
77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;;
*:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;;
*:*) col=$red res=FAIL recheck=yes gcopy=yes;;
esac
# Report the test outcome and exit status in the logs, so that one can
# know whether the test passed or failed simply by looking at the '.log'
# file, without the need of also peaking into the corresponding '.trs'
# file (automake bug#11814).
echo "$res $test_name (exit status: $estatus)" >>"$log_file"
# Report outcome to console.
echo "${col}${res}${std}: $test_name"
# Register the test result, and other relevant metadata.
echo ":test-result: $res" > $trs_file
echo ":global-test-result: $res" >> $trs_file
echo ":recheck: $recheck" >> $trs_file
echo ":copy-in-global-log: $gcopy" >> $trs_file
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
binfmt-support-2.2.2/config.h.in 0000644 0000000 0000000 00000151151 14246242216 013427 0000000 0000000 /* config.h.in. Generated from configure.ac by autoheader. */
/* Define if building universal (internal helper macro) */
#undef AC_APPLE_UNIVERSAL_BUILD
/* Define to the number of bits in type 'ptrdiff_t'. */
#undef BITSIZEOF_PTRDIFF_T
/* Define to the number of bits in type 'sig_atomic_t'. */
#undef BITSIZEOF_SIG_ATOMIC_T
/* Define to the number of bits in type 'size_t'. */
#undef BITSIZEOF_SIZE_T
/* Define to the number of bits in type 'wchar_t'. */
#undef BITSIZEOF_WCHAR_T
/* Define to the number of bits in type 'wint_t'. */
#undef BITSIZEOF_WINT_T
/* Define to 1 if using 'alloca.c'. */
#undef C_ALLOCA
/* Define as the bit index in the word where to find bit 0 of the exponent of
'double'. */
#undef DBL_EXPBIT0_BIT
/* Define as the word index where to find the exponent of 'double'. */
#undef DBL_EXPBIT0_WORD
/* Define to 1 if // is a file system root distinct from /. */
#undef DOUBLE_SLASH_IS_DISTINCT_ROOT
/* Define this to 1 if F_DUPFD behavior does not match POSIX */
#undef FCNTL_DUPFD_BUGGY
/* Define to 1 if realpath() can malloc memory, always gives an absolute path,
and handles a trailing slash correctly. */
#undef FUNC_REALPATH_NEARLY_WORKS
/* Define to 1 if realpath() can malloc memory, always gives an absolute path,
and handles leading slashes and a trailing slash correctly. */
#undef FUNC_REALPATH_WORKS
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module canonicalize-lgpl shall be considered present. */
#undef GNULIB_CANONICALIZE_LGPL
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module fscanf shall be considered present. */
#undef GNULIB_FSCANF
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module msvc-nothrow shall be considered present. */
#undef GNULIB_MSVC_NOTHROW
/* Define to 1 if printf and friends should be labeled with attribute
"__gnu_printf__" instead of "__printf__" */
#undef GNULIB_PRINTF_ATTRIBUTE_FLAVOR_GNU
/* Define to 1 to add extern declaration of program_invocation_name to argp.h
*/
#undef GNULIB_PROGRAM_INVOCATION_NAME
/* Define to 1 to add extern declaration of program_invocation_short_name to
argp.h */
#undef GNULIB_PROGRAM_INVOCATION_SHORT_NAME
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module reallocarray shall be considered present. */
#undef GNULIB_REALLOCARRAY
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module scanf shall be considered present. */
#undef GNULIB_SCANF
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module strerror shall be considered present. */
#undef GNULIB_STRERROR
/* Define to 1 when the gnulib module calloc-gnu should be tested. */
#undef GNULIB_TEST_CALLOC_GNU
/* Define to 1 when the gnulib module calloc-posix should be tested. */
#undef GNULIB_TEST_CALLOC_POSIX
/* Define to 1 when the gnulib module canonicalize_file_name should be tested.
*/
#undef GNULIB_TEST_CANONICALIZE_FILE_NAME
/* Define to 1 when the gnulib module chdir should be tested. */
#undef GNULIB_TEST_CHDIR
/* Define to 1 when the gnulib module cloexec should be tested. */
#undef GNULIB_TEST_CLOEXEC
/* Define to 1 when the gnulib module close should be tested. */
#undef GNULIB_TEST_CLOSE
/* Define to 1 when the gnulib module dup2 should be tested. */
#undef GNULIB_TEST_DUP2
/* Define to 1 when the gnulib module fcntl should be tested. */
#undef GNULIB_TEST_FCNTL
/* Define to 1 when the gnulib module fgetc should be tested. */
#undef GNULIB_TEST_FGETC
/* Define to 1 when the gnulib module fgets should be tested. */
#undef GNULIB_TEST_FGETS
/* Define to 1 when the gnulib module fprintf should be tested. */
#undef GNULIB_TEST_FPRINTF
/* Define to 1 when the gnulib module fputc should be tested. */
#undef GNULIB_TEST_FPUTC
/* Define to 1 when the gnulib module fputs should be tested. */
#undef GNULIB_TEST_FPUTS
/* Define to 1 when the gnulib module fread should be tested. */
#undef GNULIB_TEST_FREAD
/* Define to 1 when the gnulib module free-posix should be tested. */
#undef GNULIB_TEST_FREE_POSIX
/* Define to 1 when the gnulib module fscanf should be tested. */
#undef GNULIB_TEST_FSCANF
/* Define to 1 when the gnulib module fstat should be tested. */
#undef GNULIB_TEST_FSTAT
/* Define to 1 when the gnulib module fwrite should be tested. */
#undef GNULIB_TEST_FWRITE
/* Define to 1 when the gnulib module getc should be tested. */
#undef GNULIB_TEST_GETC
/* Define to 1 when the gnulib module getchar should be tested. */
#undef GNULIB_TEST_GETCHAR
/* Define to 1 when the gnulib module getdelim should be tested. */
#undef GNULIB_TEST_GETDELIM
/* Define to 1 when the gnulib module getdtablesize should be tested. */
#undef GNULIB_TEST_GETDTABLESIZE
/* Define to 1 when the gnulib module getline should be tested. */
#undef GNULIB_TEST_GETLINE
/* Define to 1 when the gnulib module getopt-posix should be tested. */
#undef GNULIB_TEST_GETOPT_POSIX
/* Define to 1 when the gnulib module lstat should be tested. */
#undef GNULIB_TEST_LSTAT
/* Define to 1 when the gnulib module malloc-gnu should be tested. */
#undef GNULIB_TEST_MALLOC_GNU
/* Define to 1 when the gnulib module malloc-posix should be tested. */
#undef GNULIB_TEST_MALLOC_POSIX
/* Define to 1 when the gnulib module memchr should be tested. */
#undef GNULIB_TEST_MEMCHR
/* Define to 1 when the gnulib module mempcpy should be tested. */
#undef GNULIB_TEST_MEMPCPY
/* Define to 1 when the gnulib module open should be tested. */
#undef GNULIB_TEST_OPEN
/* Define to 1 when the gnulib module printf should be tested. */
#undef GNULIB_TEST_PRINTF
/* Define to 1 when the gnulib module putc should be tested. */
#undef GNULIB_TEST_PUTC
/* Define to 1 when the gnulib module putchar should be tested. */
#undef GNULIB_TEST_PUTCHAR
/* Define to 1 when the gnulib module puts should be tested. */
#undef GNULIB_TEST_PUTS
/* Define to 1 when the gnulib module rawmemchr should be tested. */
#undef GNULIB_TEST_RAWMEMCHR
/* Define to 1 when the gnulib module readlink should be tested. */
#undef GNULIB_TEST_READLINK
/* Define to 1 when the gnulib module reallocarray should be tested. */
#undef GNULIB_TEST_REALLOCARRAY
/* Define to 1 when the gnulib module realloc-gnu should be tested. */
#undef GNULIB_TEST_REALLOC_GNU
/* Define to 1 when the gnulib module realloc-posix should be tested. */
#undef GNULIB_TEST_REALLOC_POSIX
/* Define to 1 when the gnulib module realpath should be tested. */
#undef GNULIB_TEST_REALPATH
/* Define to 1 when the gnulib module rename should be tested. */
#undef GNULIB_TEST_RENAME
/* Define to 1 when the gnulib module rmdir should be tested. */
#undef GNULIB_TEST_RMDIR
/* Define to 1 when the gnulib module scanf should be tested. */
#undef GNULIB_TEST_SCANF
/* Define to 1 when the gnulib module sleep should be tested. */
#undef GNULIB_TEST_SLEEP
/* Define to 1 when the gnulib module stat should be tested. */
#undef GNULIB_TEST_STAT
/* Define to 1 when the gnulib module strchrnul should be tested. */
#undef GNULIB_TEST_STRCHRNUL
/* Define to 1 when the gnulib module strerror should be tested. */
#undef GNULIB_TEST_STRERROR
/* Define to 1 when the gnulib module strndup should be tested. */
#undef GNULIB_TEST_STRNDUP
/* Define to 1 when the gnulib module strnlen should be tested. */
#undef GNULIB_TEST_STRNLEN
/* Define to 1 when the gnulib module vasprintf should be tested. */
#undef GNULIB_TEST_VASPRINTF
/* Define to 1 when the gnulib module vfprintf should be tested. */
#undef GNULIB_TEST_VFPRINTF
/* Define to 1 when the gnulib module vprintf should be tested. */
#undef GNULIB_TEST_VPRINTF
/* Define to 1 when the gnulib module vsnprintf should be tested. */
#undef GNULIB_TEST_VSNPRINTF
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module xalloc shall be considered present. */
#undef GNULIB_XALLOC
/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
whether the gnulib module xalloc-die shall be considered present. */
#undef GNULIB_XALLOC_DIE
/* Define to 1 if you have 'alloca' after including , a header that
may be supplied by this distribution. */
#undef HAVE_ALLOCA
/* Define to 1 if works. */
#undef HAVE_ALLOCA_H
/* Define to 1 if you have the header file. */
#undef HAVE_BP_SYM_H
/* Define to 1 if you have the `canonicalize_file_name' function. */
#undef HAVE_CANONICALIZE_FILE_NAME
/* Define to 1 if you have the header file. */
#undef HAVE_CRTDEFS_H
/* Define to 1 if C supports variable-length arrays. */
#undef HAVE_C_VARARRAYS
/* Define to 1 if you have the declaration of `clearerr_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_CLEARERR_UNLOCKED
/* Define to 1 if you have the declaration of `ecvt', and to 0 if you don't.
*/
#undef HAVE_DECL_ECVT
/* Define to 1 if you have the declaration of `execvpe', and to 0 if you
don't. */
#undef HAVE_DECL_EXECVPE
/* Define to 1 if you have the declaration of `fcloseall', and to 0 if you
don't. */
#undef HAVE_DECL_FCLOSEALL
/* Define to 1 if you have the declaration of `fcvt', and to 0 if you don't.
*/
#undef HAVE_DECL_FCVT
/* Define to 1 if you have the declaration of `feof_unlocked', and to 0 if you
don't. */
#undef HAVE_DECL_FEOF_UNLOCKED
/* Define to 1 if you have the declaration of `ferror_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_FERROR_UNLOCKED
/* Define to 1 if you have the declaration of `fflush_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_FFLUSH_UNLOCKED
/* Define to 1 if you have the declaration of `fgets_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_FGETS_UNLOCKED
/* Define to 1 if you have the declaration of `fputc_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_FPUTC_UNLOCKED
/* Define to 1 if you have the declaration of `fputs_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_FPUTS_UNLOCKED
/* Define to 1 if you have the declaration of `fread_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_FREAD_UNLOCKED
/* Define to 1 if you have the declaration of `fwrite_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_FWRITE_UNLOCKED
/* Define to 1 if you have the declaration of `gcvt', and to 0 if you don't.
*/
#undef HAVE_DECL_GCVT
/* Define to 1 if you have the declaration of `getchar_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_GETCHAR_UNLOCKED
/* Define to 1 if you have the declaration of `getc_unlocked', and to 0 if you
don't. */
#undef HAVE_DECL_GETC_UNLOCKED
/* Define to 1 if you have the declaration of `getdelim', and to 0 if you
don't. */
#undef HAVE_DECL_GETDELIM
/* Define to 1 if you have the declaration of `getdtablesize', and to 0 if you
don't. */
#undef HAVE_DECL_GETDTABLESIZE
/* Define to 1 if you have the declaration of `getline', and to 0 if you
don't. */
#undef HAVE_DECL_GETLINE
/* Define to 1 if you have the declaration of `program_invocation_name', and
to 0 if you don't. */
#undef HAVE_DECL_PROGRAM_INVOCATION_NAME
/* Define to 1 if you have the declaration of `program_invocation_short_name',
and to 0 if you don't. */
#undef HAVE_DECL_PROGRAM_INVOCATION_SHORT_NAME
/* Define to 1 if you have the declaration of `putchar_unlocked', and to 0 if
you don't. */
#undef HAVE_DECL_PUTCHAR_UNLOCKED
/* Define to 1 if you have the declaration of `putc_unlocked', and to 0 if you
don't. */
#undef HAVE_DECL_PUTC_UNLOCKED
/* Define to 1 if you have the declaration of `sleep', and to 0 if you don't.
*/
#undef HAVE_DECL_SLEEP
/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
don't. */
#undef HAVE_DECL_STRERROR_R
/* Define to 1 if you have the declaration of `strncasecmp', and to 0 if you
don't. */
#undef HAVE_DECL_STRNCASECMP
/* Define to 1 if you have the declaration of `strndup', and to 0 if you
don't. */
#undef HAVE_DECL_STRNDUP
/* Define to 1 if you have the declaration of `strnlen', and to 0 if you
don't. */
#undef HAVE_DECL_STRNLEN
/* Define to 1 if you have the declaration of `vsnprintf', and to 0 if you
don't. */
#undef HAVE_DECL_VSNPRINTF
/* Define to 1 if you have the declaration of `wcsdup', and to 0 if you don't.
*/
#undef HAVE_DECL_WCSDUP
/* Define to 1 if you have the declaration of `_snprintf', and to 0 if you
don't. */
#undef HAVE_DECL__SNPRINTF
/* Define to 1 if you have the declaration of `__argv', and to 0 if you don't.
*/
#undef HAVE_DECL___ARGV
/* Define to 1 if you have the `faccessat' function. */
#undef HAVE_FACCESSAT
/* Define to 1 if you have the `fcntl' function. */
#undef HAVE_FCNTL
/* Define to 1 if you have the header file. */
#undef HAVE_FEATURES_H
/* Define to 1 if you have the `flockfile' function. */
#undef HAVE_FLOCKFILE
/* Define if the 'free' function is guaranteed to preserve errno. */
#undef HAVE_FREE_POSIX
/* Define to 1 if you have the `funlockfile' function. */
#undef HAVE_FUNLOCKFILE
/* Define to 1 if you have the `getcwd' function. */
#undef HAVE_GETCWD
/* Define to 1 if you have the `getdelim' function. */
#undef HAVE_GETDELIM
/* Define to 1 if you have the `getdtablesize' function. */
#undef HAVE_GETDTABLESIZE
/* Define to 1 if you have the `getexecname' function. */
#undef HAVE_GETEXECNAME
/* Define to 1 if you have the header file. */
#undef HAVE_GETOPT_H
/* Define to 1 if you have the `getopt_long_only' function. */
#undef HAVE_GETOPT_LONG_ONLY
/* Define to 1 if you have the `getprogname' function. */
#undef HAVE_GETPROGNAME
/* Define if you have the 'intmax_t' type in or . */
#undef HAVE_INTMAX_T
/* Define to 1 if you have the header file. */
#undef HAVE_INTTYPES_H
/* Define if exists, doesn't clash with , and
declares uintmax_t. */
#undef HAVE_INTTYPES_H_WITH_UINTMAX
/* Define to 1 if you have the header file. */
#undef HAVE_LIMITS_H
/* Define to 1 if you have the header file. */
#undef HAVE_LINEWRAP_H
/* Define to 1 if you have the `link' function. */
#undef HAVE_LINK
/* Define to 1 if the system has the type 'long long int'. */
#undef HAVE_LONG_LONG_INT
/* Define to 1 if you have the `lstat' function. */
#undef HAVE_LSTAT
/* Define if malloc, realloc, and calloc set errno on allocation failure. */
#undef HAVE_MALLOC_POSIX
/* Define to 1 if mmap()'s MAP_ANONYMOUS flag is available after including
config.h and . */
#undef HAVE_MAP_ANONYMOUS
/* Define to 1 if you have the `mbrtowc' function. */
#undef HAVE_MBRTOWC
/* Define to 1 if you have the `mempcpy' function. */
#undef HAVE_MEMPCPY
/* Define to 1 if you have the header file. */
#undef HAVE_MINIX_CONFIG_H
/* Define to 1 if defines the MIN and MAX macros. */
#undef HAVE_MINMAX_IN_LIMITS_H
/* Define to 1 if defines the MIN and MAX macros. */
#undef HAVE_MINMAX_IN_SYS_PARAM_H
/* Define to 1 if you have the `mprotect' function. */
#undef HAVE_MPROTECT
/* Define to 1 on MSVC platforms that have the "invalid parameter handler"
concept. */
#undef HAVE_MSVC_INVALID_PARAMETER_HANDLER
/* Define if program_invocation_name is defined */
#undef HAVE_PROGRAM_INVOCATION_NAME
/* Define if program_invocation_short_name is defined */
#undef HAVE_PROGRAM_INVOCATION_SHORT_NAME
/* Define to 1 if you have the `rawmemchr' function. */
#undef HAVE_RAWMEMCHR
/* Define to 1 if you have the `readlink' function. */
#undef HAVE_READLINK
/* Define to 1 if you have the `reallocarray' function. */
#undef HAVE_REALLOCARRAY
/* Define to 1 if you have the `realpath' function. */
#undef HAVE_REALPATH
/* Define to 1 if you have the header file. */
#undef HAVE_SDKDDKVER_H
/* Define to 1 if you have the `setdtablesize' function. */
#undef HAVE_SETDTABLESIZE
/* Define to 1 if 'sig_atomic_t' is a signed integer type. */
#undef HAVE_SIGNED_SIG_ATOMIC_T
/* Define to 1 if 'wchar_t' is a signed integer type. */
#undef HAVE_SIGNED_WCHAR_T
/* Define to 1 if 'wint_t' is a signed integer type. */
#undef HAVE_SIGNED_WINT_T
/* Define to 1 if you have the `sleep' function. */
#undef HAVE_SLEEP
/* Define to 1 if you have the `snprintf' function. */
#undef HAVE_SNPRINTF
/* Define if the return value of the snprintf function is the number of of
bytes (excluding the terminating NUL) that would have been produced if the
buffer had been large enough. */
#undef HAVE_SNPRINTF_RETVAL_C99
/* Define if the string produced by the snprintf function is always NUL
terminated. */
#undef HAVE_SNPRINTF_TRUNCATION_C99
/* Define to 1 if you have the header file. */
#undef HAVE_STDINT_H
/* Define if exists, doesn't clash with , and declares
uintmax_t. */
#undef HAVE_STDINT_H_WITH_UINTMAX
/* Define to 1 if you have the header file. */
#undef HAVE_STDIO_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the `strcasecmp' function. */
#undef HAVE_STRCASECMP
/* Define to 1 if you have the `strchrnul' function. */
#undef HAVE_STRCHRNUL
/* Define if you have `strerror_r'. */
#undef HAVE_STRERROR_R
/* Define to 1 if you have the header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the `strncasecmp' function. */
#undef HAVE_STRNCASECMP
/* Define to 1 if you have the `strndup' function. */
#undef HAVE_STRNDUP
/* Define to 1 if you have the `strnlen' function. */
#undef HAVE_STRNLEN
/* Define to 1 if `st_atimensec' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_ATIMENSEC
/* Define to 1 if `st_atimespec.tv_nsec' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC
/* Define to 1 if `st_atim.st__tim.tv_nsec' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC
/* Define to 1 if `st_atim.tv_nsec' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC
/* Define to 1 if `st_birthtimensec' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_BIRTHTIMENSEC
/* Define to 1 if `st_birthtimespec.tv_nsec' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_BIRTHTIMESPEC_TV_NSEC
/* Define to 1 if `st_birthtim.tv_nsec' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_BIRTHTIM_TV_NSEC
/* Define to 1 if you have the `symlink' function. */
#undef HAVE_SYMLINK
/* Define to 1 if you have the header file. */
#undef HAVE_SYSEXITS_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_BITYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_CDEFS_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_INTTYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_MMAN_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_PARAM_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_SOCKET_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_TIME_H
/* Define to 1 if you have the