biosdevname-0.4.1/0000775000000000000000000000000011775366205010775 500000000000000biosdevname-0.4.1/biosdevname.spec.fedora0000664000000000000000000001273111775366176015337 00000000000000Name: biosdevname Version: 0.4.1 Release: 1%{?dist} Summary: Udev helper for naming devices per BIOS names Group: System Environment/Base License: GPLv2 URL: http://linux.dell.com/files/%{name} # SMBIOS only exists on these arches. It's also likely that other # arches don't expect the PCI bus to be sorted breadth-first, or of # so, there haven't been any comments about that on LKML. ExclusiveArch: %{ix86} x86_64 Source0: http://linux.dell.com/files/%{name}/permalink/%{name}-%{version}.tar.gz BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) BuildRequires: pciutils-devel, zlib-devel # to figure out how to name the rules file BuildRequires: udev #To generate the configure script BuildRequires: autoconf BuildRequires: automake # for ownership of /etc/udev/rules.d Requires: udev %description biosdevname in its simplest form takes a kernel device name as an argument, and returns the BIOS-given name it "should" be. This is necessary on systems where the BIOS name for a given device (e.g. the label on the chassis is "Gb1") doesn't map directly and obviously to the kernel name (e.g. eth0). %prep %setup -q %build #If configure script doesn't exist generate it with autogen script [ -e ./configure ] || ./autogen.sh --no-configure # this is a udev rule, so it needs to live in / rather than /usr %configure --disable-rpath --prefix=/ --sbindir=/sbin make %{?_smp_mflags} %install rm -rf %{buildroot} make install install-data DESTDIR=%{buildroot} %clean rm -rf %{buildroot} %files %defattr(-,root,root,-) %doc COPYING README /sbin/%{name} # hack for either /etc or /lib rules location /*/udev/rules.d/*.rules %{_mandir}/man1/%{name}.1* %changelog * Tue Oct 4 2011 Praveen K Paladugu - 0.3.11-1 - Fix man page for PCI slot naming - Fix clearing of buffer for NPAR/SRIOV naming - Add --nopirq and --smbios options to manpage. - Verify length of VPD on network device - Close file handle on sysfs read - Fix naming policy for NPAR devices. Match each PCI device to its VPD 'physical' device to get correct index - Exclude building on ia64 arch - Add support functions for determining PCIE slot - Scan full path to parent when getting PCIE slot - Fix NPAR naming for add-in cards - Don't display _vf suffix on NPAR devices with single function - Fix PCIe/PIRQ slot mapping * Thu Feb 17 2011 Matt Domsch - 0.3.7-1 - drop dump_pirq, suggest use biosdecode instead - don't use '#' in names, use 'p' instead, by popular demand - properly look for SMBIOS, then $PIR, then recurse - Add kernel command line parameter "biosdevname={0|1}" to turn off/on biosdevname - Fix segfault when BIOS advertises zero sized PIRQ Routing Table - Add 'bonding' and 'openvswitch' to the virtual devices list - fail PIRQ lookups if device domain is not 0 - Don't suggest names if running in a virtual machine (Xen, KVM, VMware tested, but should work on others) - Typo fixes * Tue Jan 25 2011 Matt Domsch - 0.3.6-1 - drop biosdevnameS, it's unused and fails to build on F15 * Tue Jan 25 2011 Matt Domsch - 0.3.5-1 - install dump_pirq into /usr/sbin - fix udev rule, skip running if NAME is already set - move udev rule to /lib/udev/rules.d by default * Thu Dec 16 2010 Matt Domsch - 0.3.4-1 - drop unnecessary explicit version requirement on udev - bugfix: start indices at 1 not 0, to match Dell and HP server port designations - bugfix: don't assign names to unknown devices - bugfix: don't assign duplicate names * Thu Dec 9 2010 Matt Domsch - 0.3.3-1 - add back in use of PCI IRQ Routing Table, if info is not provided by sysfs or SMBIOS * Thu Dec 2 2010 Matt Domsch - 0.3.2-1 - fix for multi-port cards with bridges - removal of code for seriously obsolete systems * Mon Nov 28 2010 Matt Domsch 0.3.1-1 - remove all policies except 'physical' and 'all_ethN' - handle SR-IOV devices properly * Wed Nov 10 2010 Matt Domsch 0.3.0-1 - add --policy=loms, make it default - read index and labels from sysfs if available * Mon Jul 27 2009 Jordan Hargrave 0.2.5-1 - fix mmap error checking * Fri Jul 24 2009 Fedora Release Engineering - 0.2.4-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Mon Feb 23 2009 Fedora Release Engineering - 0.2.4-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Tue May 06 2008 Matt Domsch 0.2.4-5 - use policy=all_names to find breakage * Sun Feb 10 2008 Matt Domsch 0.2.4-4 - rebuild for gcc43 * Fri Sep 21 2007 Matt Domsch 0.2.4-3 - fix manpage entry in files * Fri Sep 21 2007 Matt Domsch 0.2.4-2 - rebuild with Requires: udev > 115-3.20070920git * Fri Sep 21 2007 Matt Domsch 0.2.4-1 - coordinate udev rules usage with udev maintainer - fix crashes in pcmcia search, in_ethernet(), and incorrect command line parsing. * Mon Aug 27 2007 Matt Domsch 0.2.3-1 - eliminate libbiosdevname.*, pre and post scripts * Fri Aug 24 2007 Matt Domsch 0.2.2-1 - ExclusiveArch those arches with SMBIOS and PCI IRQ Routing tables - eliminate libsysfs dependency, move app to / for use before /usr is mounted. - build static * Mon Aug 20 2007 Matt Domsch 0.2.1-1 - initial release biosdevname-0.4.1/biosdevname.spec.suse0000664000000000000000000000766311775366176015066 00000000000000Name: biosdevname Version: 0.4.1 Release: 1%{?dist} Summary: Udev helper for naming devices per BIOS names Group: System Environment/Base License: GPLv2 URL: http://linux.dell.com/files/%{name} # SMBIOS only exists on these arches. It's also likely that other # arches don't expect the PCI bus to be sorted breadth-first, or of # so, there haven't been any comments about that on LKML. ExclusiveArch: %{ix86} x86_64 Source0: http://linux.dell.com/files/%{name}/permalink/%{name}-%{version}.tar.gz BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) BuildRequires: pciutils-devel, zlib-devel # to figure out how to name the rules file BuildRequires: udev # for ownership of /etc/udev/rules.d Requires: udev %description biosdevname in its simplest form takes a kernel device name as an argument, and returns the BIOS-given name it "should" be. This is necessary on systems where the BIOS name for a given device (e.g. the label on the chassis is "Gb1") doesn't map directly and obviously to the kernel name (e.g. eth0). %prep %setup -q %build # this is a udev rule, so it needs to live in / rather than /usr %configure --disable-rpath --prefix=/ --sbindir=/sbin make %{?_smp_mflags} %install rm -rf %{buildroot} make install DESTDIR=%{buildroot} %clean rm -rf %{buildroot} %files %defattr(-,root,root,-) %doc COPYING README /sbin/%{name} # hack for either /etc or /lib rules location /*/udev/rules.d/*.rules %{_mandir}/man1/%{name}.1* %changelog * Thu Feb 17 2011 Matt Domsch - 0.3.7-1 - drop dump_pirq, suggest use biosdecode instead - don't use '#' in names, use 'p' instead, by popular demand - properly look for SMBIOS, then $PIR, then recurse - Add kernel command line parameter "biosdevname={0|1}" to turn off/on biosdevname - Fix segfault when BIOS advertises zero sized PIRQ Routing Table - Add 'bonding' and 'openvswitch' to the virtual devices list - fail PIRQ lookups if device domain is not 0 - Don't suggest names if running in a virtual machine (Xen, KVM, VMware tested, but should work on others) - Typo fixes * Tue Jan 25 2011 Matt Domsch - 0.3.6-1 - drop biosdevnameS, it's unused and fails to build on F15 * Tue Jan 25 2011 Matt Domsch - 0.3.5-1 - install dump_pirq into /usr/sbin - fix udev rule, skip running if NAME is already set - move udev rule to /lib/udev/rules.d by default * Thu Dec 16 2010 Matt Domsch - 0.3.4-1 - drop unnecessary explicit version requirement on udev - bugfix: start indices at 1 not 0, to match Dell and HP server port designations - bugfix: don't assign names to unknown devices - bugfix: don't assign duplicate names * Thu Dec 9 2010 Matt Domsch - 0.3.3-1 - add back in use of PCI IRQ Routing Table, if info is not provided by sysfs or SMBIOS * Thu Dec 2 2010 Matt Domsch - 0.3.2-1 - fix for multi-port cards with bridges - removal of code for seriously obsolete systems * Mon Nov 28 2010 Matt Domsch 0.3.1-1 - remove all policies except 'physical' and 'all_ethN' - handle SR-IOV devices properly * Wed Nov 10 2010 Matt Domsch 0.3.0-1 - add --policy=loms, make it default - read index and labels from sysfs if available * Mon Jul 27 2009 Jordan Hargrave 0.2.5-1 - fix mmap error checking * Fri Sep 21 2007 Matt Domsch 0.2.4-1 - coordinate udev rules usage with udev maintainer - fix crashes in pcmcia search, in_ethernet(), and incorrect command line parsing. * Mon Aug 27 2007 Matt Domsch 0.2.3-1 - eliminate libbiosdevname.*, pre and post scripts * Fri Aug 24 2007 Matt Domsch 0.2.2-1 - ExclusiveArch those arches with SMBIOS and PCI IRQ Routing tables - eliminate libsysfs dependency, move app to / for use before /usr is mounted. - build static * Mon Aug 20 2007 Matt Domsch 0.2.1-1 - initial release biosdevname-0.4.1/install-sh0000755000000000000000000002202111775366145012717 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2005-05-14.22 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= stripcmd= rmcmd="$rmprog -f" mvcmd="$mvprog" src= dst= dir_arg= dstarg= no_target_directory= usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: -c (ignored) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. --help display this help and exit. --version display version info and exit. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test -n "$1"; do case $1 in -c) shift continue;; -d) dir_arg=true shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; --help) echo "$usage"; exit $?;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -s) stripcmd=$stripprog shift continue;; -t) dstarg=$2 shift shift continue;; -T) no_target_directory=true shift continue;; --version) echo "$0 $scriptversion"; exit $?;; *) # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. test -n "$dir_arg$dstarg" && break # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dstarg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dstarg" shift # fnord fi shift # arg dstarg=$arg done break;; esac done if test -z "$1"; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi for src do # Protect names starting with `-'. case $src in -*) src=./$src ;; esac if test -n "$dir_arg"; then dst=$src src= if test -d "$dst"; then mkdircmd=: chmodcmd= else mkdircmd=$mkdirprog fi else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dstarg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dstarg # Protect names starting with `-'. case $dst in -*) dst=./$dst ;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dstarg: Is a directory" >&2 exit 1 fi dst=$dst/`basename "$src"` fi fi # This sed command emulates the dirname command. dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` # Make sure that the destination directory exists. # Skip lots of stat calls in the usual case. if test ! -d "$dstdir"; then defaultIFS=' ' IFS="${IFS-$defaultIFS}" oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` shift IFS=$oIFS pathcomp= while test $# -ne 0 ; do pathcomp=$pathcomp$1 shift if test ! -d "$pathcomp"; then $mkdirprog "$pathcomp" # mkdir can fail with a `File exist' error in case several # install-sh are creating the directory concurrently. This # is OK. test -d "$pathcomp" || exit fi pathcomp=$pathcomp/ done fi if test -n "$dir_arg"; then $doit $mkdircmd "$dst" \ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } else dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. $doit $cpprog "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && # Now rename the file to the real destination. { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ || { # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { if test -f "$dstdir/$dstfile"; then $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ || { echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 (exit 1); exit 1 } else : fi } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" } } fi || { (exit 1); exit 1; } done # The final little trick to "correctly" pass the exit status to the exit trap. { (exit 0); exit 0 } # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: biosdevname-0.4.1/configure.ac0000644000000000000000000000551511775365615013213 00000000000000# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. # vim:tw=0:ts=8:sw=8:et AC_PREREQ(2.59) AC_INIT([biosdevname],[0.4.1],[Jordan_Hargrave@dell.com]) AC_LANG([C]) AC_USE_SYSTEM_EXTENSIONS AC_CONFIG_SRCDIR([src/read_proc.c]) AC_CONFIG_HEADER([config.h]) AC_PREFIX_DEFAULT() AM_INIT_AUTOMAKE AM_MAINTAINER_MODE # Checks for programs. AC_PROG_AWK AC_PROG_CC AM_PROG_CC_C_O AC_PROG_LN_S AC_PROG_CXX AC_PROG_RANLIB AC_CHECK_PROGS([READELF], [readelf]) AC_CHECK_FUNCS([realpath]) # Checks for libraries. AC_CHECK_LIB([c], [snprintf]) # libz has to come before libpci because libpci needs it now. AC_CHECK_LIB([z], [gzopen], [true], [AC_MSG_ERROR([You must install zlib-devel (Fedora/Red Hat/SuSE), libzip-dev (Debian/Ubuntu), or equivalent])]) AC_CHECK_LIB([pci], [pci_alloc], [true], [AC_MSG_ERROR([You must install pciutils-devel (Fedora/Red Hat/SuSE), pciutils-dev (Debian/Ubuntu), or equivalent])], -lz) # Checks for header files. AC_HEADER_STDC AC_HEADER_SYS_WAIT AC_CHECK_HEADERS([fcntl.h limits.h locale.h stddef.h stdint.h stdlib.h string.h sys/ioctl.h sys/time.h syslog.h unistd.h]) AC_CHECK_HEADER([pci/pci.h], , [AC_MSG_ERROR([You must install pciutils-devel or equivalent])]) AC_CHECK_HEADER([zlib.h], , [AC_MSG_ERROR([You must install zlib-devel or equivalent])]) # Check for pci_dev.domain AC_CHECK_MEMBERS([struct pci_dev.domain], , , [#include]) # Checks for typedefs, structures, and compiler characteristics. AC_C_CONST AC_C_INLINE AC_TYPE_OFF_T AC_TYPE_SIZE_T AC_TYPE_SSIZE_T AC_TYPE_UINT8_T AC_TYPE_UINT16_T AC_HEADER_TIME AC_STRUCT_TM # Checks for library functions. AC_FUNC_ALLOCA AC_FUNC_FORK AC_PROG_GCC_TRADITIONAL AC_FUNC_MALLOC AC_FUNC_MEMCMP AC_FUNC_MMAP AC_FUNC_REALLOC AC_FUNC_SELECT_ARGTYPES AC_FUNC_STAT AC_FUNC_VPRINTF AC_CHECK_FUNCS([dup2 gettimeofday memset munmap select socket strcasecmp strchr strdup strerror strncasecmp strpbrk strrchr strstr strtol strtoul]) # this is ugly, but accounts for SLES 10, Red Hat/Fedora, and Ubuntu # handles default udev rules as of udev 114 or thereabouts RULEDEST=/lib/udev/rules.d/71-biosdevname.rules if [[ -e /etc/udev/rules.d/60-net.rules ]]; then # RHEL 5 / Fedora RULEDEST=/etc/udev/rules.d/60-biosdevname.rules elif [[ -e /etc/udev/rules.d/31-network.rules ]]; then # SLES 10 RULEDEST=/etc/udev/rules.d/31-biosdevname.rules elif [[ -e /etc/udev/rules.d/25-iftab.rules ]]; then # older Ubuntu RULEDEST=/etc/udev/rules.d/25-biosdevname.rules fi RULEDIR=$(dirname $RULEDEST) AC_SUBST(RULEDEST, $RULEDEST) AC_SUBST(RULEDIR, $RULEDIR) echo "PACKAGE_NAME='$PACKAGE_NAME'" > version echo "PACKAGE_VERSION='$PACKAGE_VERSION'" >> version echo "PACKAGE_STRING='$PACKAGE_STRING'" >> version AC_CONFIG_FILES([Makefile biosdevname.spec.fedora biosdevname.spec.suse]) AC_OUTPUT biosdevname-0.4.1/COPYING0000644000000000000000000004311011766436556011754 00000000000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. biosdevname-0.4.1/biosdevname.rules.in0000644000000000000000000000167611766436556014711 00000000000000SUBSYSTEM!="net", GOTO="netdevicename_end" KERNEL!="eth*", GOTO="netdevicename_end" ACTION!="add", GOTO="netdevicename_end" NAME=="?*", GOTO="netdevicename_end" # kernel command line "biosdevname={0|1}" can turn off/on biosdevname IMPORT{cmdline}="biosdevname" ENV{biosdevname}=="?*", ENV{UDEV_BIOSDEVNAME}="$env{biosdevname}" # ENV{UDEV_BIOSDEVNAME} can be used for blacklist/whitelist # but will be overwritten by the kernel command line argument ENV{UDEV_BIOSDEVNAME}=="0", GOTO="netdevicename_end" ENV{UDEV_BIOSDEVNAME}=="1", GOTO="netdevicename_start" # uncomment the next line for biosdevname to be off by default # GOTO="netdevicename_end" LABEL="netdevicename_start" # using NAME= instead of setting INTERFACE_NAME, so that persistent # names aren't generated for these devices, they are "named" on each boot. PROGRAM="/sbin/biosdevname --policy physical -i %k", NAME="%c", OPTIONS+="string_escape=replace" LABEL="netdevicename_end" biosdevname-0.4.1/Makefile.in0000644000000000000000000007246411775366145013000 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : DIST_COMMON = README $(am__configure_deps) $(dist_noinst_DATA) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/biosdevname.spec.fedora.in \ $(srcdir)/biosdevname.spec.suse.in $(srcdir)/config.h.in \ $(srcdir)/src/Makefile.am $(top_srcdir)/configure AUTHORS \ COPYING ChangeLog INSTALL NEWS TODO compile depcomp install-sh \ ltmain.sh missing sbin_PROGRAMS = src/biosdevname$(EXEEXT) subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = biosdevname.spec.fedora biosdevname.spec.suse am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(sbin_PROGRAMS) am__dirstamp = $(am__leading_dot)dirstamp am_src_biosdevname_OBJECTS = src/bios_dev_name.$(OBJEXT) \ src/bios_device.$(OBJEXT) src/pirq.$(OBJEXT) src/pci.$(OBJEXT) \ src/eths.$(OBJEXT) src/read_proc.$(OBJEXT) \ src/naming_policy.$(OBJEXT) src/sysfs.$(OBJEXT) \ src/dmidecode/dmidecode.$(OBJEXT) \ src/dmidecode/dmioem.$(OBJEXT) src/dmidecode/util.$(OBJEXT) src_biosdevname_OBJECTS = $(am_src_biosdevname_OBJECTS) src_biosdevname_DEPENDENCIES = DEFAULT_INCLUDES = -I. -I$(srcdir) -I. depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(src_biosdevname_SOURCES) DIST_SOURCES = $(src_biosdevname_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man_MANS) DATA = $(dist_noinst_DATA) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ READELF = @READELF@ RULEDEST = @RULEDEST@ RULEDIR = @RULEDIR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ AUTOMAKE_OPTIONS = subdir-objects SUBDIRS = EXTRA_DIST = pkg src/bios_dev_name.h src/bios_device.h src/pirq.h \ src/pci.h src/eths.h src/ethtool-util.h src/ethtool-copy.h \ src/list.h src/naming_policy.h src/state.h src/sysfs.h \ src/libbiosdevname.h src/dmidecode/config.h \ src/dmidecode/dmidecode.h src/dmidecode/dmioem.h \ src/dmidecode/types.h src/dmidecode/util.h dist_noinst_DATA = biosdevname.rules.in biosdevname.spec.fedora biosdevname.spec.suse biosdevname.1 CLEANFILES = version INCLUDES = -I.. AM_CFLAGS = -Wall -fno-strict-aliasing man_MANS = biosdevname.1 src_biosdevname_SOURCES = \ src/bios_dev_name.c \ src/bios_device.c \ src/pirq.c \ src/pci.c \ src/eths.c \ src/read_proc.c \ src/naming_policy.c \ src/sysfs.c \ src/dmidecode/dmidecode.c \ src/dmidecode/dmioem.c \ src/dmidecode/util.c src_biosdevname_LDADD = -lz -lpci SPEC_FILE = biosdevname.spec.fedora all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .o .obj am--refresh: @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/src/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 biosdevname.spec.fedora: $(top_builddir)/config.status $(srcdir)/biosdevname.spec.fedora.in cd $(top_builddir) && $(SHELL) ./config.status $@ biosdevname.spec.suse: $(top_builddir)/config.status $(srcdir)/biosdevname.spec.suse.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)" @list='$(sbin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(sbin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ rm -f "$(DESTDIR)$(sbindir)/$$f"; \ done clean-sbinPROGRAMS: -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) src/$(am__dirstamp): @$(mkdir_p) src @: > src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp): @$(mkdir_p) src/$(DEPDIR) @: > src/$(DEPDIR)/$(am__dirstamp) src/bios_dev_name.$(OBJEXT): src/$(am__dirstamp) \ src/$(DEPDIR)/$(am__dirstamp) src/bios_device.$(OBJEXT): src/$(am__dirstamp) \ src/$(DEPDIR)/$(am__dirstamp) src/pirq.$(OBJEXT): src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) src/pci.$(OBJEXT): src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) src/eths.$(OBJEXT): src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) src/read_proc.$(OBJEXT): src/$(am__dirstamp) \ src/$(DEPDIR)/$(am__dirstamp) src/naming_policy.$(OBJEXT): src/$(am__dirstamp) \ src/$(DEPDIR)/$(am__dirstamp) src/sysfs.$(OBJEXT): src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) src/dmidecode/$(am__dirstamp): @$(mkdir_p) src/dmidecode @: > src/dmidecode/$(am__dirstamp) src/dmidecode/$(DEPDIR)/$(am__dirstamp): @$(mkdir_p) src/dmidecode/$(DEPDIR) @: > src/dmidecode/$(DEPDIR)/$(am__dirstamp) src/dmidecode/dmidecode.$(OBJEXT): src/dmidecode/$(am__dirstamp) \ src/dmidecode/$(DEPDIR)/$(am__dirstamp) src/dmidecode/dmioem.$(OBJEXT): src/dmidecode/$(am__dirstamp) \ src/dmidecode/$(DEPDIR)/$(am__dirstamp) src/dmidecode/util.$(OBJEXT): src/dmidecode/$(am__dirstamp) \ src/dmidecode/$(DEPDIR)/$(am__dirstamp) src/biosdevname$(EXEEXT): $(src_biosdevname_OBJECTS) $(src_biosdevname_DEPENDENCIES) src/$(am__dirstamp) @rm -f src/biosdevname$(EXEEXT) $(LINK) $(src_biosdevname_LDFLAGS) $(src_biosdevname_OBJECTS) $(src_biosdevname_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) -rm -f src/bios_dev_name.$(OBJEXT) -rm -f src/bios_device.$(OBJEXT) -rm -f src/dmidecode/dmidecode.$(OBJEXT) -rm -f src/dmidecode/dmioem.$(OBJEXT) -rm -f src/dmidecode/util.$(OBJEXT) -rm -f src/eths.$(OBJEXT) -rm -f src/naming_policy.$(OBJEXT) -rm -f src/pci.$(OBJEXT) -rm -f src/pirq.$(OBJEXT) -rm -f src/read_proc.$(OBJEXT) -rm -f src/sysfs.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/bios_dev_name.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/bios_device.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/eths.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/naming_policy.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/pci.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/pirq.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/read_proc.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/sysfs.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/dmidecode/$(DEPDIR)/dmidecode.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/dmidecode/$(DEPDIR)/dmioem.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@src/dmidecode/$(DEPDIR)/util.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \ @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \ @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` uninstall-info-am: install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/. $(distdir)/src $(distdir)/src/dmidecode @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -755 -exec chmod a+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -rm -f src/$(DEPDIR)/$(am__dirstamp) -rm -f src/$(am__dirstamp) -rm -f src/dmidecode/$(DEPDIR)/$(am__dirstamp) -rm -f src/dmidecode/$(am__dirstamp) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf src/$(DEPDIR) src/dmidecode/$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-data-local install-man install-exec-am: install-sbinPROGRAMS install-info: install-info-recursive install-man: install-man1 installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf src/$(DEPDIR) src/dmidecode/$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-local uninstall-man \ uninstall-sbinPROGRAMS uninstall-info: uninstall-info-recursive uninstall-man: uninstall-man1 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-recursive \ clean-sbinPROGRAMS ctags ctags-recursive dist dist-all \ dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip distcheck \ distclean distclean-compile distclean-generic distclean-hdr \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-local install-exec install-exec-am install-info \ install-info-am install-man install-man1 install-sbinPROGRAMS \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am \ uninstall-local uninstall-man uninstall-man1 \ uninstall-sbinPROGRAMS install-data-local: mkdir -p $(DESTDIR)@RULEDIR@ $(INSTALL_DATA) $(top_srcdir)/biosdevname.rules.in $(DESTDIR)@RULEDEST@ uninstall-local: rm -f $(DESTDIR)@RULEDEST@ # extra space at beginning to work around automake... :( ifndef SPEC_FILE endif rpm: dist mkdir -p dist/{SOURCES,BUILD,RPMS,SRPMS,SPECS} cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz dist/SOURCES cp $(SPEC_FILE) dist/SPECS/@PACKAGE_NAME@.spec rpmbuild --define "_topdir $$PWD/dist" -ba --nodeps dist/SPECS/@PACKAGE_NAME@.spec ; rm -rf dist/{SOURCES,BUILD,SPECS} srpm: dist mkdir -p dist/{SOURCES,BUILD,RPMS,SRPMS,SPECS} cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz dist/SOURCES cp $(SPEC_FILE) dist/SPECS/@PACKAGE_NAME@.spec rpmbuild --define "_topdir $$PWD/dist" -bs --nodeps dist/SPECS/@PACKAGE_NAME@.spec ; rm -rf dist/{SOURCES,BUILD,SPECS} deb: dist oldpwd=`pwd` ; \ tmp_dir=`mktemp -d /tmp/$(PACKAGE_NAME).XXXXXXXX` ; \ cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz $${tmp_dir}/$(PACKAGE_NAME)_$(PACKAGE_VERSION).orig.tar.gz ; \ tar -C $${tmp_dir} -xzf $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz ; \ cd $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION) ; \ mv pkg/debian debian ; \ rmdir pkg/ ; \ pdebuild --buildresult $$oldpwd/.. ; \ cd - ;\ rm -rf $${tmp_dir} sdeb: dist oldpwd=`pwd` ; \ tmp_dir=`mktemp -d /tmp/biosdevname.XXXXXXXX` ; \ cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz $${tmp_dir}/$(PACKAGE_NAME)_$(PACKAGE_VERSION).orig.tar.gz ; \ tar -C $${tmp_dir} -xzf $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz ; \ mv $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION)/pkg/debian $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION)/debian ; \ rmdir pkg/ ; \ cd $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION) ; \ dpkg-buildpackage -S -sa -rfakeroot -k92F0FC09 ; \ mv ../biosdevname_* $$oldpwd/.. ; \ cd - ;\ rm -rf $${tmp_dir} # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: biosdevname-0.4.1/INSTALL0000644000000000000000000002243211775366145011752 00000000000000Installation Instructions ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free Software Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Here is a another example: /bin/bash ./configure CONFIG_SHELL=/bin/bash Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent configuration-related scripts to be executed by `/bin/bash'. `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of the options to `configure', and exit. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. biosdevname-0.4.1/ltmain.sh0000644000000000000000000057753011766436556012563 00000000000000# ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. basename="s,^.*/,,g" # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" # The name of this program: progname=`echo "$progpath" | $SED $basename` modename="$progname" # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 PROGRAM=ltmain.sh PACKAGE=libtool VERSION=1.5.22 TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell, and then maybe $echo will work. exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE fi # Global variables. mode=$default_mode nonopt= prev= prevopt= run= show="$echo" show_help= execute_dlfiles= duplicate_deps=no preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" ##################################### # Shell function definitions: # This seems to be the best place for them # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $mkdir "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || { $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 exit $EXIT_FAILURE } fi $echo "X$my_tmpdir" | $Xsed } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. func_win32_libid () { win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | \ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $echo $win32_libid_type } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac CC_quoted="$CC_quoted $arg" done case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac CC_quoted="$CC_quoted $arg" done case "$@ " in " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then $echo "$modename: unable to infer tagged configuration" $echo "$modename: specify a tag with \`--tag'" 1>&2 exit $EXIT_FAILURE # else # $echo "$modename: using $tagname tagged configuration" fi ;; esac fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 exit $EXIT_FAILURE fi } # func_extract_archives gentop oldlib ... func_extract_archives () { my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" my_status="" $show "${rm}r $my_gentop" $run ${rm}r "$my_gentop" $show "$mkdir $my_gentop" $run $mkdir "$my_gentop" my_status=$? if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then exit $my_status fi for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` my_xdir="$my_gentop/$my_xlib" $show "${rm}r $my_xdir" $run ${rm}r "$my_xdir" $show "$mkdir $my_xdir" $run $mkdir "$my_xdir" exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then exit $exit_status fi case $host in *-darwin*) $show "Extracting $my_xabs" # Do not bother doing anything if just a dry run if test -z "$run"; then darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` if test -n "$darwin_arches"; then darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= $show "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we have a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` lipo -create -output "$darwin_file" $darwin_files done # $darwin_filelist ${rm}r unfat-$$ cd "$darwin_orig_dir" else cd "$darwin_orig_dir" func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches fi # $run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # End of Shell function definitions ##################################### # Darwin sucks eval std_shrext=\"$shrext_cmds\" disable_libs=no # Parse our command line options once, thoroughly. while test "$#" -gt 0 do arg="$1" shift case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; tag) tagname="$arg" preserve_args="${preserve_args}=$arg" # Check whether tagname contains only valid characters case $tagname in *[!-_A-Za-z0-9,/]*) $echo "$progname: invalid tag name: $tagname" 1>&2 exit $EXIT_FAILURE ;; esac case $tagname in CC) # Don't test for the "default" C tag, as we know, it's there, but # not specially marked. ;; *) if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then taglist="$taglist $tagname" # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" else $echo "$progname: ignoring unknown tag $tagname" 1>&2 fi ;; esac ;; *) eval "$prev=\$arg" ;; esac prev= prevopt= continue fi # Have we seen a non-optional argument yet? case $arg in --help) show_help=yes ;; --version) $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" $echo $echo "Copyright (C) 2005 Free Software Foundation, Inc." $echo "This is free software; see the source for copying conditions. There is NO" $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." exit $? ;; --config) ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath # Now print the configurations for the tags. for tagname in $taglist; do ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" done exit $? ;; --debug) $echo "$progname: enabling shell trace mode" set -x preserve_args="$preserve_args $arg" ;; --dry-run | -n) run=: ;; --features) $echo "host: $host" if test "$build_libtool_libs" = yes; then $echo "enable shared libraries" else $echo "disable shared libraries" fi if test "$build_old_libs" = yes; then $echo "enable static libraries" else $echo "disable static libraries" fi exit $? ;; --finish) mode="finish" ;; --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; --preserve-dup-deps) duplicate_deps="yes" ;; --quiet | --silent) show=: preserve_args="$preserve_args $arg" ;; --tag) prevopt="--tag" prev=tag preserve_args="$preserve_args --tag" ;; --tag=*) set tag "$optarg" ${1+"$@"} shift prev=tag preserve_args="$preserve_args --tag" ;; -dlopen) prevopt="-dlopen" prev=execute_dlfiles ;; -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; *) nonopt="$arg" break ;; esac done if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi case $disable_libs in no) ;; shared) build_libtool_libs=no build_old_libs=yes ;; static) build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ;; esac # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 case $nonopt in *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) mode=link for arg do case $arg in -c) mode=compile break ;; esac done ;; *db | *dbx | *strace | *truss) mode=execute ;; *install*|cp|mv) mode=install ;; *rm) mode=uninstall ;; *) # If we have no mode, but dlfiles were specified, then do execute mode. test -n "$execute_dlfiles" && mode=execute # Just use the default operation mode. if test -z "$mode"; then if test -n "$nonopt"; then $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 else $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 fi fi ;; esac fi # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) if test -n "$libobj" ; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 exit $EXIT_FAILURE fi arg_mode=target continue ;; -static | -prefer-pic | -prefer-non-pic) later="$later $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac lastarg="$lastarg $arg" done IFS="$save_ifs" lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` # Add the arguments to base_compile. base_compile="$base_compile $lastarg" continue ;; * ) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, and some SunOS ksh mistreat backslash-escaping # in scan sets (worked around with variable expansion), # and furthermore cannot handle '|' '&' '(' ')' in scan sets # at all, so we specify them separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac base_compile="$base_compile $lastarg" done # for arg case $arg_mode in arg) $echo "$modename: you must specify an argument for -Xcompile" exit $EXIT_FAILURE ;; target) $echo "$modename: you must specify a target with \`-o'" 1>&2 exit $EXIT_FAILURE ;; *) # Get the name of the library object. [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSifmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; *.ii) xform=ii ;; *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; *.java) xform=java ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 exit $EXIT_FAILURE ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -static) build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` case $qlibobj in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qlibobj="\"$qlibobj\"" ;; esac test "X$libobj" != "X$qlibobj" \ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir= else xdir=$xdir/ fi lobj=${xdir}$objdir/$objname if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi $run $rm $removelist trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $run ln "$progpath" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi $echo "$srcfile" > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` case $qsrcfile in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qsrcfile="\"$qsrcfile\"" ;; esac $run $rm "$libobj" "${libobj}T" # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then $show "$mv $output_obj $lobj" if $run $mv $output_obj $lobj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the PIC object to the libtool object file. test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the non-PIC object the libtool object file. # Only append if the libtool object file exists. test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes else if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built fi build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ;; *) qarg=$arg ;; esac libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. compile_command="$compile_command @SYMFILE@" finalize_command="$finalize_command @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" exit $EXIT_FAILURE fi prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat $save_arg` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit $EXIT_FAILURE fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit $EXIT_FAILURE else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi done else $echo "$modename: link input file \`$save_arg' does not exist" exit $EXIT_FAILURE fi arg=$save_arg prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit $EXIT_FAILURE ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= compile_command="$compile_command $wl$qarg" finalize_command="$finalize_command $wl$qarg" continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; shrext) shrext_cmds="$arg" prev= continue ;; darwin_framework|darwin_framework_skip) test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" prev= continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 continue ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" exit $EXIT_FAILURE fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework|-arch|-isysroot) case " $CC " in *" ${arg} ${1} "* | *" ${arg} ${1} "*) prev=darwin_framework_skip ;; *) compiler_flags="$compiler_flags $arg" prev=darwin_framework ;; esac compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; esac continue ;; -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" notinst_path="$notinst_path $dir" fi dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework deplibs="$deplibs -framework System" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. -model) compile_command="$compile_command $arg" compiler_flags="$compiler_flags $arg" finalize_command="$finalize_command $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) compiler_flags="$compiler_flags $arg" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" continue ;; -module) module=yes continue ;; # -64, -mips[0-9] enable 64-bit mode on the SGI compiler # -r[0-9][0-9]* specifies the processor on the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler # +DA*, +DD* enable 64-bit mode on the HP compiler # -q* pass through compiler args for the IBM compiler # -m* pass through architecture-specific compiler args for GCC # -m*, -t[45]*, -txscale* pass through architecture-specific # compiler args for GCC # -pg pass through profiling flag for GCC # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ -t[45]*|-txscale*|@*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" compiler_flags="$compiler_flags $arg" continue ;; -shrext) prev=shrext continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # The PATH hackery in wrapper scripts is required on Windows # in order for the loader to find any dlls it needs. $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit $EXIT_FAILURE ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -static) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Wl,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $wl$flag" linker_flags="$linker_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; *.$objext) # A standard object. objs="$objs $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit $EXIT_FAILURE fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit $EXIT_FAILURE else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi done # argument parsing loop if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` if test "X$output_objdir" = "X$output"; then output_objdir="$objdir" else output_objdir="$output_objdir/$objdir" fi # Create the object directory. if test ! -d "$output_objdir"; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then exit $exit_status fi fi # Determine the type of output case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac case $host in *cygwin* | *mingw* | *pw32*) # don't eliminate duplications in $postdeps and $predeps duplicate_compiler_generated_deps=yes ;; *) duplicate_compiler_generated_deps=$duplicate_deps ;; esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if test "X$duplicate_deps" = "Xyes" ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi libs="$libs $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries case $linkmode in lib) passes="conv link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 exit $EXIT_FAILURE ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then library_names= old_library= case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` if eval $echo \"$deplib\" 2>/dev/null \ | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then $echo $echo "*** Warning: Trying to link with static lib archive $deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because the file extensions .$libext of this argument makes me believe" $echo "*** that it is just a static archive that I should not used here." else $echo $echo "*** Warning: Linking the shared library $output against the" $echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 exit $EXIT_FAILURE fi # Check to see that this really is a libtool archive. if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." dlname= dlopen= dlpreopen= libdir= library_names= old_library= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit $EXIT_FAILURE fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 exit $EXIT_FAILURE fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit $EXIT_FAILURE fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 exit $EXIT_FAILURE fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 abs_ladir="$ladir" fi ;; esac laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then $echo "$modename: warning: library \`$lib' was moved." 1>&2 dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 exit $EXIT_FAILURE fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { test "$prefer_static_libs" = no || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; *) temp_rpath="$temp_rpath $absdir" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes ; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi # This is a shared library # Warn about portability, can't link against -module's on # some systems (darwin) if test "$shouldnotlink" = yes && test "$pass" = link ; then $echo if test "$linkmode" = prog; then $echo "*** Warning: Linking the executable $output against the loadable module" else $echo "*** Warning: Linking the shared library $output against the loadable module" fi $echo "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names realname="$2" shift; shift libname=`eval \\$echo \"$libname_spec\"` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw*) major=`expr $current - $age` versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" soname=`$echo $soroot | ${SED} -e 's/^.*\///'` newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' cmds=$extract_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' cmds=$old_archive_from_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a module then we can not link against # it, someone is ignoring the new warnings I added if /usr/bin/file -L $add 2> /dev/null | $EGREP ": [^:]* bundle" >/dev/null ; then $echo "** Warning, lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $echo $echo "** And there doesn't seem to be a static archive available" $echo "** The link will probably fail, sorry" else add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" exit $EXIT_FAILURE fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && \ test "$hardcode_minus_L" != yes && \ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. $echo $echo "*** Warning: This system can not link to static lib archive $lib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then $echo "*** But as you try to build a module library, libtool will still create " $echo "*** a static module, that should work as long as the dlopening application" $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then $echo $echo "*** However, this would only work if libtool was able to extract symbol" $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" $echo "*** not find such a program. So, this module is probably useless." $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do case $deplib in -L*) path="$deplib" ;; *.la) dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$deplib" && dir="." # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" fi ;; esac if grep "^installed=no" $deplib > /dev/null; then path="$absdir/$objdir" else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi path="$absdir" fi depdepl= case $host in *-*-darwin*) # we do not want to link against static libs, # but need to link against shared eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$path/$depdepl" ; then depdepl="$path/$depdepl" fi # do not add paths which are already there case " $newlib_search_path " in *" $path "*) ;; *) newlib_search_path="$newlib_search_path $path";; esac fi path="" ;; *) path="-L$path" ;; esac ;; -l*) case $host in *-*-darwin*) # Again, we only want to link against shared libraries eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` for tmp in $newlib_search_path ; do if test -f "$tmp/lib$tmp_libs.dylib" ; then eval depdepl="$tmp/lib$tmp_libs.dylib" break fi done path="" ;; *) continue ;; esac ;; *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac case " $deplibs " in *" $depdepl "*) ;; *) deplibs="$depdepl $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 fi if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 fi if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 fi # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 exit $EXIT_FAILURE else $echo $echo "*** Warning: Linking the shared library $output against the non-libtool" $echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi if test "$dlself" != no; then $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath if test "$#" -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 fi else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$2" number_minor="$3" number_revision="$4" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) current=`expr $number_major + $number_minor - 1` age="$number_minor" revision="$number_minor" ;; esac ;; no) current="$2" revision="$3" age="$4" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header major=.`expr $current - $age` versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current"; ;; irix | nonstopux) major=`expr $current - $age + 1` case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) major=.`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) major=.`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. major=`expr $current - $age` versuffix="-$major" ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$echo "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi removelist="$removelist $p" ;; *) ;; esac done if test -n "$removelist"; then $show "${rm}r $removelist" $run ${rm}r $removelist fi fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. for path in $notinst_path; do lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs -framework System" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $rm conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | ${SED} 10q \ | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $echo $echo "*** Warning: linker path does not have real file for library $a_deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $echo "*** with $libname but no candidates were found. (...for file magic test)" else $echo "*** with $libname and none of the candidates passed a file format test" $echo "*** using a file magic. Last file checked: $potlib" fi fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval $echo \"$potent_lib\" 2>/dev/null \ | ${SED} 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $echo $echo "*** Warning: linker path does not have real file for library $a_deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $echo "*** with $libname but no candidates were found. (...for regex pattern test)" else $echo "*** with $libname and none of the candidates passed a file format test" $echo "*** using a regex pattern. Last file checked: $potlib" fi fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` done fi if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ | grep . >/dev/null; then $echo if test "X$deplibs_check_method" = "Xnone"; then $echo "*** Warning: inter-library dependencies are not supported in this platform." else $echo "*** Warning: inter-library dependencies are not known to be supported." fi $echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then $echo $echo "*** Warning: libtool could not satisfy all declared inter-library" $echo "*** dependencies of module $libname. Therefore, libtool will create" $echo "*** a static module, that should work as long as the dlopening" $echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then $echo $echo "*** However, this would only work if libtool was able to extract symbol" $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" $echo "*** not find such a program. So, this module is probably useless." $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else $echo "*** The inter-library dependencies that have been dropped here will be" $echo "*** automatically added whenever a program is linked with this library" $echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then $echo $echo "*** Since this library must not contain undefined symbols," $echo "*** because either the platform does not support them or" $echo "*** it was explicitly requested with -no-undefined," $echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do linknames="$linknames $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" if len=`expr "X$cmd" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then $show "$cmd" $run eval "$cmd" || exit $? skipped_export=false else # The command line is too long to execute in one step. $show "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex"; then $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise. $echo "creating reloadable object files..." # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output output_la=`$echo "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= delfiles= last_robj= k=1 output=$output_objdir/$output_la-${k}.$objext # Loop over the list of objects to be linked. for obj in $save_libobjs do eval test_cmds=\"$reload_cmds $objlist $last_robj\" if test "X$objlist" = X || { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; }; then objlist="$objlist $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext k=`expr $k + 1` output=$output_objdir/$output_la-${k}.$objext objlist=$obj len=1 fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if ${skipped_export-false}; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols libobjs=$output # Append the command to create the export file. eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" fi # Set up a command to remove the reloadable object files # after they are used. i=0 while test "$i" -lt "$k" do i=`expr $i + 1` delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" done $echo "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi # Append the command to remove the reloadable object files # to the just-reset $cmds. eval cmds=\"\$cmds~\$rm $delfiles\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then $show "${rm}r $gentop" $run ${rm}r "$gentop" fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 fi if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi case $output in *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit $EXIT_FAILURE fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $run $rm $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" else gentop="$output_objdir/${obj}x" generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $run eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 fi if test "$preload" = yes; then if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." fi fi case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac case $host in *darwin*) # Don't allow lazy linking, it breaks C++ global constructors if test "$tagname" = CXX ; then compile_command="$compile_command ${wl}-bind_at_load" finalize_command="$finalize_command ${wl}-bind_at_load" fi ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then dlsyms="${outputname}S.c" else $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 fi fi if test -n "$dlsyms"; then case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${outputname}.nm" $show "$rm $nlist ${nlist}S ${nlist}T" $run $rm "$nlist" "${nlist}S" "${nlist}T" # Parse the name list into a source file. $show "creating $output_objdir/$dlsyms" test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ #ifdef __cplusplus extern \"C\" { #endif /* Prevent the only kind of declaration conflicts we can make. */ #define lt_preloaded_symbols some_other_symbol /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then $show "generating symbol list for \`$output'" test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $run $rm $export_symbols $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* ) $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac else $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* ) $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` $run eval '$echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -z "$run"; then # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if grep -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else $echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ #undef lt_preloaded_symbols #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ " case $host in *cygwin* | *mingw* ) $echo >> "$output_objdir/$dlsyms" "\ /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs */ struct { " ;; * ) $echo >> "$output_objdir/$dlsyms" "\ const struct { " ;; esac $echo >> "$output_objdir/$dlsyms" "\ const char *name; lt_ptr address; } lt_preloaded_symbols[] = {\ " eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" $echo >> "$output_objdir/$dlsyms" "\ {0, (lt_ptr) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " fi pic_flag_for_symtable= case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag";; esac esac # Now compile the dynamic symbol file. $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. case $host in *cygwin* | *mingw* ) if test -f "$output_objdir/${outputname}.def" ; then compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` else compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` fi ;; * ) compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ;; esac ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 exit $EXIT_FAILURE ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" exit_status=$? # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" $run $rm "$output_objdir/${outputname}S.${objext}" fi exit $exit_status fi if test -n "$shlibpath_var"; then # We should set the shlibpath_var rpath= for dir in $temp_rpath; do case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" ;; *) # Relative path: add a thisdir entry. rpath="$rpath\$thisdir/$dir:" ;; esac done temp_rpath="$rpath" fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $run $rm $output # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname $show "$link_command" $run eval "$link_command" || exit $? # Now create the wrapper script. $show "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if our run command is non-null. if test -z "$run"; then # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) output_name=`basename $output` output_path=`dirname $output` cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $rm $cwrappersource $cwrapper trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 cat > $cwrappersource <> $cwrappersource<<"EOF" #include #include #include #include #include #include #include #include #include #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) /* -DDEBUG is fairly common in CFLAGS. */ #undef DEBUG #if defined DEBUGWRAPPER # define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) #else # define DEBUG(format, ...) #endif const char *program_name = NULL; void * xmalloc (size_t num); char * xstrdup (const char *string); const char * base_name (const char *name); char * find_executable(const char *wrapper); int check_executable(const char *path); char * strendzap(char *str, const char *pat); void lt_fatal (const char *message, ...); int main (int argc, char *argv[]) { char **newargz; int i; program_name = (char *) xstrdup (base_name (argv[0])); DEBUG("(main) argv[0] : %s\n",argv[0]); DEBUG("(main) program_name : %s\n",program_name); newargz = XMALLOC(char *, argc+2); EOF cat >> $cwrappersource <> $cwrappersource <<"EOF" newargz[1] = find_executable(argv[0]); if (newargz[1] == NULL) lt_fatal("Couldn't find %s", argv[0]); DEBUG("(main) found exe at : %s\n",newargz[1]); /* we know the script has the same name, without the .exe */ /* so make sure newargz[1] doesn't end in .exe */ strendzap(newargz[1],".exe"); for (i = 1; i < argc; i++) newargz[i+1] = xstrdup(argv[i]); newargz[argc+1] = NULL; for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" return 127; } void * xmalloc (size_t num) { void * p = (void *) malloc (num); if (!p) lt_fatal ("Memory exhausted"); return p; } char * xstrdup (const char *string) { return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL ; } const char * base_name (const char *name) { const char *base; #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ if (isalpha ((unsigned char)name[0]) && name[1] == ':') name += 2; #endif for (base = name; *name; name++) if (IS_DIR_SEPARATOR (*name)) base = name + 1; return base; } int check_executable(const char * path) { struct stat st; DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); if ((!path) || (!*path)) return 0; if ((stat (path, &st) >= 0) && ( /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ #if defined (S_IXOTH) ((st.st_mode & S_IXOTH) == S_IXOTH) || #endif #if defined (S_IXGRP) ((st.st_mode & S_IXGRP) == S_IXGRP) || #endif ((st.st_mode & S_IXUSR) == S_IXUSR)) ) return 1; else return 0; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise */ char * find_executable (const char* wrapper) { int has_slash = 0; const char* p; const char* p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char* concat_name; DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char* path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char* q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR(*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen(tmp); concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen(tmp); concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); return NULL; } char * strendzap(char *str, const char *pat) { size_t len, patlen; assert(str != NULL); assert(pat != NULL); len = strlen(str); patlen = strlen(pat); if (patlen <= len) { str += len - patlen; if (strcmp(str, pat) == 0) *str = '\0'; } return str; } static void lt_error_core (int exit_status, const char * mode, const char * message, va_list ap) { fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } EOF # we should really use a build-platform specific compiler # here, but OTOH, the wrappers (shell script and this C one) # are only useful if you want to execute the "real" binary. # Since the "real" binary is built for $host, then this # wrapper might as well be built for $host, too. $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ;; esac $rm $output trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 $echo > $output "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then echo=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then # Yippee, \$echo works! : else # Restart under the correct shell, and then maybe \$echo will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $echo >> $output "\ # Find the directory that this script lives in. thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $mkdir \"\$progdir\" else $rm \"\$progdir/\$file\" fi" $echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" exit $EXIT_FAILURE fi fi $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $rm \"\$progdir/\$program\"; $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } $rm \"\$progdir/\$file\" fi" else $echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $echo >> $output "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $echo >> $output "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $echo >> $output "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $echo >> $output "\ exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" exit $EXIT_FAILURE fi else # The program doesn't exist. \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 $echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit $EXIT_FAILURE fi fi\ " chmod +x $output fi exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $addlibs oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do $echo "X$obj" | $Xsed -e 's%^.*/%%' done | sort | sort -uc >/dev/null 2>&1); then : else $echo "copying selected object files to avoid basename conflicts..." if test -z "$gentop"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "$mkdir $gentop" $run $mkdir "$gentop" exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$gentop"; then exit $exit_status fi fi save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase counter=`expr $counter + 1` case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" $run ln "$obj" "$gentop/$newobj" || $run cp "$obj" "$gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" if len=`expr "X$cmds" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts $echo "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done for obj in $save_oldobjs do oldobjs="$objlist $obj" objlist="$objlist $obj" eval test_cmds=\"$old_archive_cmds\" if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do eval cmd=\"$cmd\" IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$generated"; then $show "${rm}r$generated" $run ${rm}r$generated fi # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. if test -z "$run"; then for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdlfiles="$newdlfiles $libdir/$name" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit $EXIT_SUCCESS ;; # libtool install mode install) modename="$modename: install" # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $echo "X$nonopt" | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$arg " arg="$1" shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$install_prog$arg" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) case " $install_prog " in *[\\\ /]cp\ *) ;; *) prev=$arg ;; esac ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$install_prog $arg" done if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test -z "$files"; then if test -z "$dest"; then $echo "$modename: no file or destination specified" 1>&2 else $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Strip any trailing slash from the destination. dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` test "X$destdir" = "X$dest" && destdir=. destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` # Not a directory, so check to see that there is only one file specified. set dummy $files if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi library_names= old_library= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. if test "$inst_prefix_dir" = "$destdir"; then $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 exit $EXIT_FAILURE fi if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 exit $EXIT_FAILURE fi fi # See the names of the shared library. set dummy $library_names if test -n "$2"; then realname="$2" shift shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. $show "$install_prog $dir/$srcname $destdir/$realname" $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$striplib $destdir/$realname" $run eval "$striplib $destdir/$realname" || exit $? fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do if test "$linkname" != "$realname"; then $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" fi done fi # Do each command in the postinstall commands. lib="$destdir/$realname" cmds=$postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' fi exit $lt_exit } done IFS="$save_ifs" fi # Install the pseudo-library for information purposes. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` instname="$dir/$name"i $show "$install_prog $instname $destdir/$name" $run eval "$install_prog $instname $destdir/$name" || exit $? # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; *.$objext) staticdest="$destfile" destfile= ;; *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac # Install the libtool object if requested. if test -n "$destfile"; then $show "$install_prog $file $destfile" $run eval "$install_prog $file $destfile" || exit $? fi # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then file=`$echo $file|${SED} 's,.exe$,,'` stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin*|*mingw*) wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` ;; *) wrapper=$file ;; esac if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= # Note that it is not necessary on cygwin/mingw to append a dot to # foo even if both foo and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. # # If there is no directory component, then add one. case $wrapper in */* | *\\*) . ${wrapper} ;; *) . ./${wrapper} ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 exit $EXIT_FAILURE fi finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done relink_command= # Note that it is not necessary on cygwin/mingw to append a dot to # foo even if both foo and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. # # If there is no directory component, then add one. case $wrapper in */* | *\\*) . ${wrapper} ;; *) . ./${wrapper} ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then tmpdir=`func_mktempdir` file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ${rm}r "$tmpdir" continue fi file="$outputname" else $echo "$modename: warning: cannot relink \`$file'" 1>&2 fi else # Install the binary that we compiled earlier. file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac ;; esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" ;; esac done for file in $staticlibs; do name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` # Set up the ranlib parameters. oldlib="$destdir/$name" $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? if test -n "$stripme" && test -n "$old_striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. cmds=$old_postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$future_libdirs"; then $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 fi if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi ;; # libtool finish mode finish) modename="$modename: finish" libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. cmds=$finish_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" done IFS="$save_ifs" fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $run eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. test "$show" = : && exit $EXIT_SUCCESS $echo "X----------------------------------------------------------------------" | $Xsed $echo "Libraries have been installed in:" for libdir in $libdirs; do $echo " $libdir" done $echo $echo "If you ever happen to want to link against installed libraries" $echo "in a given directory, LIBDIR, you must either use libtool, and" $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" $echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" $echo " during execution" fi if test -n "$runpath_var"; then $echo " - add LIBDIR to the \`$runpath_var' environment variable" $echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi $echo $echo "See any operating system documentation about shared libraries for" $echo "more information, such as the ld(1) and ld.so(8) manual pages." $echo "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS ;; # libtool execute mode execute) modename="$modename: execute" # The first argument is the command name. cmd="$nonopt" if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" exit $EXIT_FAILURE fi # Handle -dlopen flags immediately. for file in $execute_dlfiles; do if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi dir= case $file in *.la) # Check to see that this really is a libtool archive. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Read the libtool library. dlname= library_names= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" continue fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 exit $EXIT_FAILURE fi ;; *.lo) # Just add the directory containing the .lo file. dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. ;; *) $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` args="$args \"$file\"" done if test -z "$run"; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables if test "${save_LC_ALL+set}" = set; then LC_ALL="$save_LC_ALL"; export LC_ALL fi if test "${save_LANG+set}" = set; then LANG="$save_LANG"; export LANG fi # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" $echo "export $shlibpath_var" fi $echo "$cmd$args" exit $EXIT_SUCCESS fi ;; # libtool clean and uninstall mode clean | uninstall) modename="$modename: $mode" rm="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi rmdirs= origobjdir="$objdir" for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. objdir="$origobjdir" else objdir="$dir/$origobjdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if (test -L "$file") >/dev/null 2>&1 \ || (test -h "$file") >/dev/null 2>&1 \ || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" case "$mode" in clean) case " $library_names " in # " " in the beginning catches empty $dlname *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. cmds=$postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. cmds=$old_postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # Read the .lo file . $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" \ && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" \ && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) if test "$mode" = clean ; then noexename=$name case $file in *.exe) file=`$echo $file|${SED} 's,.exe$,,'` noexename=`$echo $name|${SED} 's,.exe$,,'` # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$noexename # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi ;; esac $show "$rm $rmfiles" $run $rm $rmfiles || exit_status=1 done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then $show "rmdir $dir" $run rmdir $dir >/dev/null 2>&1 fi done exit $exit_status ;; "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 exit $EXIT_FAILURE ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 exit $EXIT_FAILURE fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd exit $EXIT_FAILURE fi # We need to display help for each of the modes. case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... Provide generalized library-building support services. --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --finish same as \`--mode=finish' --help display this help message and exit --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages --tag=TAG use configuration variables from tag TAG --version print version information MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for a more detailed description of MODE. Report bugs to ." exit $EXIT_SUCCESS ;; clean) $echo \ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $echo \ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $echo \ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $echo \ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $echo \ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -static do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $echo \ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac $echo $echo "Try \`$modename --help' for more information about other modes." exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared disable_libs=shared # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static disable_libs=static # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: biosdevname-0.4.1/README0000644000000000000000000000176711766436556011615 00000000000000biosdevname Copyright (c) 2006, 2007 Dell, Inc. Licensed under the GNU General Public License, Version 2. biosdevname in its simplest form takes a kernel device name as an argument, and returns the BIOS-given name it "should" be. This is necessary on systems where the BIOS name for a given device (e.g. the label on the chassis is "Gb1") doesn't map directly and obviously to the kernel name (e.g. eth0). The distro-patches/sles10/ directory contains a patch needed to integrate biosdevname into the SLES10 udev ethernet naming rules. This also works as a straight udev rule. On RHEL4, that looks like: KERNEL=="eth*", ACTION=="add", PROGRAM="/sbin/biosdevname -i %k", NAME="%c" This makes use of various BIOS-provided tables: PCI Confuration Space PCI IRQ Routing Table ($PIR) PCMCIA Card Information Structure SMBIOS 2.6 Type 9, Type 41, and HP OEM-specific types therefore it's likely that this will only work well on architectures that provide such information in their BIOS. biosdevname-0.4.1/config.h.in0000644000000000000000000002007211775366145012742 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP systems. This function is required for `alloca.c' support on those systems. */ #undef CRAY_STACKSEG_END /* Define to 1 if using `alloca.c'. */ #undef C_ALLOCA /* Define to 1 if you have `alloca', as a function or macro. */ #undef HAVE_ALLOCA /* Define to 1 if you have and it should be used (not on Ultrix). */ #undef HAVE_ALLOCA_H /* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ #undef HAVE_DOPRNT /* Define to 1 if you have the `dup2' function. */ #undef HAVE_DUP2 /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the `fork' function. */ #undef HAVE_FORK /* Define to 1 if you have the `getpagesize' function. */ #undef HAVE_GETPAGESIZE /* Define to 1 if you have the `gettimeofday' function. */ #undef HAVE_GETTIMEOFDAY /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the `c' library (-lc). */ #undef HAVE_LIBC /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS_H /* Define to 1 if you have the header file. */ #undef HAVE_LOCALE_H /* Define to 1 if your system has a GNU libc compatible `malloc' function, and to 0 otherwise. */ #undef HAVE_MALLOC /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `memset' function. */ #undef HAVE_MEMSET /* Define to 1 if you have a working `mmap' system call. */ #undef HAVE_MMAP /* Define to 1 if you have the `munmap' function. */ #undef HAVE_MUNMAP /* Define to 1 if your system has a GNU libc compatible `realloc' function, and to 0 otherwise. */ #undef HAVE_REALLOC /* Define to 1 if you have the `realpath' function. */ #undef HAVE_REALPATH /* Define to 1 if you have the `select' function. */ #undef HAVE_SELECT /* Define to 1 if you have the `socket' function. */ #undef HAVE_SOCKET /* Define to 1 if `stat' has the bug that it succeeds when given the zero-length file name argument. */ #undef HAVE_STAT_EMPTY_STRING_BUG /* Define to 1 if you have the header file. */ #undef HAVE_STDDEF_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strcasecmp' function. */ #undef HAVE_STRCASECMP /* Define to 1 if you have the `strchr' function. */ #undef HAVE_STRCHR /* Define to 1 if you have the `strdup' function. */ #undef HAVE_STRDUP /* Define to 1 if you have the `strerror' function. */ #undef HAVE_STRERROR /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strncasecmp' function. */ #undef HAVE_STRNCASECMP /* Define to 1 if you have the `strpbrk' function. */ #undef HAVE_STRPBRK /* Define to 1 if you have the `strrchr' function. */ #undef HAVE_STRRCHR /* Define to 1 if you have the `strstr' function. */ #undef HAVE_STRSTR /* Define to 1 if you have the `strtol' function. */ #undef HAVE_STRTOL /* Define to 1 if you have the `strtoul' function. */ #undef HAVE_STRTOUL /* Define to 1 if `domain' is member of `struct pci_dev'. */ #undef HAVE_STRUCT_PCI_DEV_DOMAIN /* Define to 1 if you have the header file. */ #undef HAVE_SYSLOG_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_IOCTL_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SELECT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SOCKET_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have that is POSIX.1 compatible. */ #undef HAVE_SYS_WAIT_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the `vfork' function. */ #undef HAVE_VFORK /* Define to 1 if you have the header file. */ #undef HAVE_VFORK_H /* Define to 1 if you have the `vprintf' function. */ #undef HAVE_VPRINTF /* Define to 1 if `fork' works. */ #undef HAVE_WORKING_FORK /* Define to 1 if `vfork' works. */ #undef HAVE_WORKING_VFORK /* Define to 1 if `lstat' dereferences a symlink specified with a trailing slash. */ #undef LSTAT_FOLLOWS_SLASHED_SYMLINK /* Define to 1 if your C compiler doesn't accept -c and -o together. */ #undef NO_MINUS_C_MINUS_O /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to the type of arg 1 for `select'. */ #undef SELECT_TYPE_ARG1 /* Define to the type of args 2, 3 and 4 for `select'. */ #undef SELECT_TYPE_ARG234 /* Define to the type of arg 5 for `select'. */ #undef SELECT_TYPE_ARG5 /* If using the C implementation of alloca, define if you know the direction of stack growth for your system; otherwise it will be automatically deduced at runtime. STACK_DIRECTION > 0 => grows toward higher addresses STACK_DIRECTION < 0 => grows toward lower addresses STACK_DIRECTION = 0 => direction of growth unknown */ #undef STACK_DIRECTION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if you can safely include both and . */ #undef TIME_WITH_SYS_TIME /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME /* Enable extensions on AIX 3, Interix. */ #ifndef _ALL_SOURCE # undef _ALL_SOURCE #endif /* Enable GNU extensions on systems that have them. */ #ifndef _GNU_SOURCE # undef _GNU_SOURCE #endif /* Enable threading extensions on Solaris. */ #ifndef _POSIX_PTHREAD_SEMANTICS # undef _POSIX_PTHREAD_SEMANTICS #endif /* Enable extensions on HP NonStop. */ #ifndef _TANDEM_SOURCE # undef _TANDEM_SOURCE #endif /* Enable general extensions on Solaris. */ #ifndef __EXTENSIONS__ # undef __EXTENSIONS__ #endif /* Version number of package */ #undef VERSION /* Define to 1 if on MINIX. */ #undef _MINIX /* Define to 2 if the system does not provide POSIX.1 features except with this defined. */ #undef _POSIX_1_SOURCE /* Define to 1 if you need to in order for `stat' and other things to work. */ #undef _POSIX_SOURCE /* Define for Solaris 2.5.1 so the uint8_t typedef from , , or is not used. If the typedef were allowed, the #define below would cause a syntax error. */ #undef _UINT8_T /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to `__inline__' or `__inline' if that's what the C compiler calls it, or to nothing if 'inline' is not supported under any name. */ #ifndef __cplusplus #undef inline #endif /* Define to rpl_malloc if the replacement function should be used. */ #undef malloc /* Define to `long int' if does not define. */ #undef off_t /* Define to `int' if does not define. */ #undef pid_t /* Define to rpl_realloc if the replacement function should be used. */ #undef realloc /* Define to `unsigned int' if does not define. */ #undef size_t /* Define to `int' if does not define. */ #undef ssize_t /* Define to the type of an unsigned integer type of width exactly 16 bits if such a type exists and the standard includes do not define it. */ #undef uint16_t /* Define to the type of an unsigned integer type of width exactly 8 bits if such a type exists and the standard includes do not define it. */ #undef uint8_t /* Define as `fork' if `vfork' does not work. */ #undef vfork biosdevname-0.4.1/compile0000755000000000000000000000717311775366145012304 00000000000000#! /bin/sh # Wrapper for compilers which do not understand `-c -o'. scriptversion=2005-05-14.22 # Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand `-c -o'. Remove `-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file `INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; esac ofile= cfile= eat= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as `compile cc -o foo foo.c'. # So we strip `-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no `-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # `.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` # Create the lock directory. # Note: use `[/.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: biosdevname-0.4.1/src/0000775000000000000000000000000011775366205011564 500000000000000biosdevname-0.4.1/src/pci.h0000644000000000000000000000514111770171116012415 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #ifndef PCI_H_INCLUDED #define PCI_H_INCLUDED #include #include #include "list.h" #include "state.h" #include "config.h" struct slotlist { struct list_head node; int slot; int count; }; struct pci_device { struct list_head node; struct pci_dev *pci_dev; int physical_slot; unsigned int index_in_slot; /* only valid if physical_slot > 0 and not a VF */ unsigned int embedded_index; /* only valid if embedded_index_valid */ unsigned short int class; unsigned char uses_smbios; unsigned char smbios_type; unsigned char smbios_instance; unsigned char smbios_enabled; char *smbios_label; unsigned int sysfs_index; char * sysfs_label; unsigned char uses_sysfs; unsigned int vf_index; unsigned int vpd_count; unsigned int vpd_pfi; unsigned int vpd_port; struct pci_device *vpd_pf; struct pci_device *pf; struct list_head vfnode; struct list_head vfs; unsigned int is_sriov_physical_function:1; unsigned int is_sriov_virtual_function:1; unsigned int embedded_index_valid:1; }; #define HAS_SMBIOS_INSTANCE 1 #define HAS_SMBIOS_LABEL 2 #define HAS_SMBIOS_SLOT 4 #define HAS_SMBIOS_EXACT_MATCH 8 #define HAS_SYSFS_INDEX 1 #define HAS_SYSFS_LABEL 2 #define PHYSICAL_SLOT_UNKNOWN (INT_MAX) #define INDEX_IN_SLOT_UNKNOWN (INT_MAX) extern int get_pci_devices(struct libbiosdevname_state *state); extern void free_pci_devices(struct libbiosdevname_state *state); extern struct pci_device * find_dev_by_pci(const struct libbiosdevname_state *state, const struct pci_dev *p); extern struct pci_device * find_pci_dev_by_pci_addr(const struct libbiosdevname_state *state, const int domain, const int bus, const int device, const int func); extern struct pci_device * find_dev_by_pci_name(const struct libbiosdevname_state *state, const char *s); extern int unparse_pci_device(char *buf, const int size, const struct pci_device *p); extern int unparse_pci_name(char *buf, int size, const struct pci_dev *pdev); static inline int is_pci_network(struct pci_device *dev) { return (dev->class & 0xFF00) == 0x0200; } static inline int is_pci_smbios_type_ethernet(struct pci_device *dev) { return (dev->smbios_type == 0x05); } static inline int is_pci_bridge(struct pci_device *dev) { return (dev->pci_dev->device_class>>8 == 0x06); } #ifdef HAVE_STRUCT_PCI_DEV_DOMAIN static inline int pci_domain_nr(const struct pci_dev *dev) { return dev->domain; } #else static inline int pci_domain_nr(const struct pci_dev *dev) { return 0; } #endif #endif /* PCI_H_INCLUDED */ biosdevname-0.4.1/src/bios_dev_name.c0000644000000000000000000001000111766436666014441 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #include #include #include #include #include #include #include "libbiosdevname.h" #include "bios_dev_name.h" static struct bios_dev_name_opts opts; int nopirq; int smver_mjr; int smver_mnr; int is_valid_smbios = 0; static void usage(void) { fprintf(stderr, "Usage: biosdevname [options] [args]...\n"); fprintf(stderr, " Options:\n"); fprintf(stderr, " -i or --interface treat [args] as ethernet devs\n"); fprintf(stderr, " -d or --debug enable debugging\n"); fprintf(stderr, " --policy [physical | all_ethN ]\n"); fprintf(stderr, " --prefix [string] string use for embedded NICs (default='em')\n"); fprintf(stderr, " --smbios [x.y] Require SMBIOS x.y or greater\n"); fprintf(stderr, " --nopirq Don't use $PIR table for slot numbers\n"); fprintf(stderr, " Example: biosdevname -i eth0\n"); fprintf(stderr, " returns: em1\n"); fprintf(stderr, " when eth0 is an embedded NIC with label '1' on the chassis.\n"); fprintf(stderr, " You must be root to run this, as it must read from /dev/mem.\n"); } static int set_policy(const char *arg) { int rc = physical; if (!strncmp("physical", arg, sizeof("physical"))) rc = physical; else if (!strncmp("all_ethN", arg, sizeof("all_ethN"))) rc = all_ethN; return rc; } static void parse_opts(int argc, char **argv) { int c; int option_index = 0; while (1) { static struct option long_options[] = /* name, has_arg, flag, val */ { {"debug", no_argument, 0, 'd'}, {"interface", no_argument, 0, 'i'}, {"policy", required_argument, 0, 'p'}, {"prefix", required_argument, 0, 'P'}, {"nopirq", no_argument, 0, 'x'}, {"smbios", required_argument, 0, 's'}, {0, 0, 0, 0} }; c = getopt_long(argc, argv, "dinp:", long_options, &option_index); if (c == -1) break; switch(c) { case 'd': opts.debug = 1; break; case 'i': opts.interface = 1; break; case 'p': opts.namingpolicy = set_policy(optarg); break; case 'P': opts.prefix = optarg; break; case 's': sscanf(optarg, "%u.%u", &smver_mjr, &smver_mnr); break; case 'x': nopirq = 1; break; default: usage(); exit(1); } } if (optind < argc) { opts.argc = argc-optind; opts.argv = &argv[optind]; opts.optind = optind; } if (opts.prefix == NULL) opts.prefix = "em"; } static u_int32_t cpuid (u_int32_t eax, u_int32_t ecx) { asm volatile ( "xor %%ebx, %%ebx; cpuid" : "=a" (eax), "=c" (ecx) : "a" (eax) : "%ebx", "%edx"); return ecx; } /* Algorithm suggested by: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1009458 */ static int running_in_virtual_machine (void) { u_int32_t eax=1U, ecx=0U; ecx = cpuid (eax, ecx); if (ecx & 0x80000000U) return 1; return 0; } static int running_as_root(void) { uid_t uid = geteuid(); if (uid != 0) { fprintf(stderr, "This program must be run as root.\n"); return 0; } return 1; } int main(int argc, char *argv[]) { int i, rc=0; char *name; void *cookie = NULL; parse_opts(argc, argv); if (!running_as_root()) exit(3); if (running_in_virtual_machine()) exit(4); cookie = setup_bios_devices(opts.namingpolicy, opts.prefix); if (!cookie) { rc = 1; goto out; } if (opts.debug) { unparse_bios_devices(cookie); rc = 0; goto out_cleanup; } if (!opts.interface) { fprintf(stderr, "Unknown device type, try passing an option like -i\n"); rc = 1; goto out_usage; } for (i=0; i * Licensed under the GNU General Public license, version 2. */ #include #include #include #include #include #include "list.h" #include "bios_device.h" #include "state.h" #include "libbiosdevname.h" void free_bios_devices(void *cookie) { struct libbiosdevname_state *state = cookie; struct bios_device *dev, *n; if (!state) return; list_for_each_entry_safe(dev, n, &state->bios_devices, node) { list_del(&(dev->node)); free(dev); } } static void unparse_bios_device(struct bios_device *dev) { char buf[8192]; memset(buf, 0, sizeof(buf)); printf("BIOS device: %s\n", dev->bios_name ? dev->bios_name : ""); if (dev->netdev) { unparse_network_device(buf, sizeof(buf), dev->netdev); printf("%s", buf); } else printf(" No driver loaded for this device.\n"); if (is_pci(dev)) { unparse_pci_device(buf, sizeof(buf), dev->pcidev); printf("%s", buf); } printf("\n"); if (dev->duplicate) printf("Duplicate: True\n"); } void unparse_bios_devices(void *cookie) { struct libbiosdevname_state *state = cookie; struct bios_device *dev; if (!state) return; list_for_each_entry(dev, &state->bios_devices, node) { unparse_bios_device(dev); } } void unparse_bios_device_by_name(void *cookie, const char *name) { struct libbiosdevname_state *state = cookie; struct bios_device *dev; if (!state) return; list_for_each_entry(dev, &state->bios_devices, node) { if (dev->netdev && !strcmp(dev->netdev->kernel_name, name)) unparse_bios_device(dev); } } char * kern_to_bios(void *cookie, const char *name) { struct libbiosdevname_state *state = cookie; struct bios_device *dev; if (!state) return NULL; list_for_each_entry(dev, &state->bios_devices, node) { if (dev->netdev && !strcmp(dev->netdev->kernel_name, name)) { if (dev->duplicate) return NULL; return dev->bios_name; } } return NULL; } void unparse_bios_device_list(void *cookie) { struct libbiosdevname_state *state = cookie; struct bios_device *dev; if (!state) return; list_for_each_entry(dev, &state->bios_devices, node) { unparse_bios_device(dev); } } /* * This sorts all the embedded devices first; by PCI bus/dev/fn, then * all the add-in devices by slot number, by pci bus/dev/fn. * Unknown location devices show up as physical slot INT_MAX, so they * come last. */ static int sort_pci(const struct bios_device *bdev_a, const struct bios_device *bdev_b) { const struct pci_device *a = bdev_a->pcidev; const struct pci_device *b = bdev_b->pcidev; if (a->physical_slot < b->physical_slot) return -1; else if (a->physical_slot > b->physical_slot) return 1; if (a->pci_dev->domain < b->pci_dev->domain) return -1; else if (a->pci_dev->domain > b->pci_dev->domain) return 1; if (a->pci_dev->bus < b->pci_dev->bus) return -1; else if (a->pci_dev->bus > b->pci_dev->bus) return 1; if (a->pci_dev->dev < b->pci_dev->dev) return -1; else if (a->pci_dev->dev > b->pci_dev->dev) return 1; if (a->pci_dev->func < b->pci_dev->func) return -1; else if (a->pci_dev->func > b->pci_dev->func) return 1; return 0; } static int sort_smbios(const struct bios_device *x, const struct bios_device *y) { struct pci_device *a, *b; if (x->pcidev && !y->pcidev) return -1; else if (!x->pcidev && y->pcidev) return 1; a = x->pcidev; b = y->pcidev; if (a->physical_slot == 0 && b->physical_slot == 0) { if ( a->smbios_type == b->smbios_type) { if ( a->smbios_instance < b->smbios_instance) return -1; else if (a->smbios_instance > b->smbios_instance) return 1; } } else { if (a->physical_slot < b->physical_slot) return -1; else if (a->physical_slot > b->physical_slot) return 1; } /* Check if PCI devices are same, sort by ifindex */ if (a == b) { if (x->netdev->ifindex < y->netdev->ifindex) return -1; if (x->netdev->ifindex > y->netdev->ifindex) return 1; } return sort_pci(x, y); } enum bios_device_types { IS_PCI, IS_UNKNOWN_TYPE, }; static int bios_device_type_num(const struct bios_device *dev) { if (is_pci(dev)) return IS_PCI; return IS_UNKNOWN_TYPE; } static int sort_by_type(const struct bios_device *a, const struct bios_device *b) { if (bios_device_type_num(a) < bios_device_type_num(b)) return -1; else if (bios_device_type_num(a) == bios_device_type_num(b)) { if (is_pci(a)) return sort_smbios(a, b); else return 0; } else if (bios_device_type_num(a) > bios_device_type_num(b)) return 1; return 0; } static void insertion_sort_devices(struct bios_device *a, struct list_head *list, int (*cmp)(const struct bios_device *, const struct bios_device *)) { struct bios_device *b; list_for_each_entry(b, list, node) { if (cmp(a, b) <= 0) { list_move_tail(&a->node, &b->node); return; } } list_move_tail(&a->node, list); } static void sort_device_list(struct libbiosdevname_state *state) { LIST_HEAD(sorted_devices); struct bios_device *dev, *tmp; list_for_each_entry_safe(dev, tmp, &state->bios_devices, node) { insertion_sort_devices(dev, &sorted_devices, sort_by_type); } list_splice(&sorted_devices, &state->bios_devices); } static void match_pci_and_eth_devs(struct libbiosdevname_state *state) { struct pci_device *p; struct bios_device *b; struct network_device *n; list_for_each_entry(n, &state->network_devices, node) { p = find_dev_by_pci_name(state, n->drvinfo.bus_info); if (!p) continue; b = malloc(sizeof(*b)); if (!b) continue; memset(b, 0, sizeof(*b)); INIT_LIST_HEAD(&b->node); b->pcidev = p; b->netdev = n; b->slot_num = -1; b->port_num = -1; claim_netdev(b->netdev); list_add(&b->node, &state->bios_devices); } } static void match_eth_and_pci_devs(struct libbiosdevname_state *state) { struct pci_device *p; struct bios_device *b; struct network_device *n; char pci_name[40]; list_for_each_entry(p, &state->pci_devices, node) { if (!is_pci_network(p)) continue; unparse_pci_name(pci_name, sizeof(pci_name), p->pci_dev); n = find_net_device_by_bus_info(state, pci_name); if (!n) continue; b = malloc(sizeof(*b)); if (!b) continue; memset(b, 0, sizeof(*b)); INIT_LIST_HEAD(&b->node); b->pcidev = p; b->netdev = n; b->slot_num = -1; b->port_num = -1; claim_netdev(b->netdev); list_add(&b->node, &state->bios_devices); } } static void match_unknown_eths(struct libbiosdevname_state *state) { struct bios_device *b; struct network_device *n; list_for_each_entry(n, &state->network_devices, node) { if (netdev_is_claimed(n)) continue; if (!drvinfo_valid(n)) continue; if (!is_ethernet(n)) /* for virtual interfaces */ continue; b = malloc(sizeof(*b)); if (!b) continue; memset(b, 0, sizeof(*b)); INIT_LIST_HEAD(&b->node); b->netdev = n; b->slot_num = -1; b->port_num = -1; list_add(&b->node, &state->bios_devices); } } static void match_all(struct libbiosdevname_state *state) { match_pci_and_eth_devs(state); match_unknown_eths(state); } static struct libbiosdevname_state * alloc_state(void) { struct libbiosdevname_state *state; state = malloc(sizeof(*state)); if (!state) return NULL; INIT_LIST_HEAD(&state->bios_devices); INIT_LIST_HEAD(&state->pci_devices); INIT_LIST_HEAD(&state->network_devices); INIT_LIST_HEAD(&state->slots); state->pacc = NULL; state->pirq_table = NULL; return state; } void cleanup_bios_devices(void *cookie) { struct libbiosdevname_state *state = cookie; if (!state) return; free_bios_devices(state); free_eths(state); free_pci_devices(state); if (state->pacc) pci_cleanup(state->pacc); if (state->pirq_table) pirq_free_table(state->pirq_table); } static int duplicates(struct bios_device *a, struct bios_device *b) { int lenA = -1, lenB = -1, rc = -1; if (a->bios_name) lenA = strlen(a->bios_name); if (b->bios_name) lenB = strlen(b->bios_name); if (lenA == lenB && lenA > 0) rc = strncmp(a->bios_name, b->bios_name, lenA); return !rc; } static void find_duplicates(struct libbiosdevname_state *state) { struct bios_device *a = NULL, *b = NULL; list_for_each_entry(a, &state->bios_devices, node) { list_for_each_entry(b, &state->bios_devices, node) { if (a == b) continue; if (duplicates(a, b)) { a->duplicate = 1; b->duplicate = 1; } } } } extern int addslot(struct libbiosdevname_state *state, int slot); /* Fix for RHBZ 816536/757743/756164/: Cards with same PCI but multiple ports * chelsio, mellanox */ static void check_ports(struct libbiosdevname_state *state) { struct pci_device *dev; struct bios_device *a; list_for_each_entry(a, &state->bios_devices, node) { dev = a->pcidev; if (dev == NULL || dev->is_sriov_virtual_function || dev->vpd_port != INT_MAX) continue; if (dev->physical_slot != PHYSICAL_SLOT_UNKNOWN) { a->slot_num = dev->physical_slot; a->port_num = addslot(state, 0x1000 + dev->physical_slot); } } } void * setup_bios_devices(int namingpolicy, const char *prefix) { int rc=1; struct libbiosdevname_state *state = alloc_state(); if (!state) return NULL; rc = get_pci_devices(state); if (rc) goto out; get_eths(state); match_all(state); sort_device_list(state); check_ports(state); rc = assign_bios_network_names(state, namingpolicy, prefix); if (rc) goto out; find_duplicates(state); return state; out: cleanup_bios_devices(state); free(state); return NULL; } biosdevname-0.4.1/src/sysfs.c0000644000000000000000000000247011766436556013027 00000000000000#include #include #include #include #include #include #include /** * sysfs_path_is_file: Check if the path supplied points to a file * @path: path to validate * Returns 0 if path points to file, 1 otherwise * Copied from sysfsutils-2.1.0 (which is LGPL2.1 or later), relicensed GPLv2 for use here. */ int sysfs_path_is_file(const char * path) { struct stat astats; if (!path) { errno = EINVAL; return 1; } if ((lstat(path, &astats)) != 0) { return 1; } if (S_ISREG(astats.st_mode)) return 0; return 1; } int sysfs_read_file(const char * path, char **output) { int ret; char *result = NULL; int fd; unsigned long resultsize = 0; ssize_t length = 0; resultsize = getpagesize(); result = malloc(resultsize); if (!result) return -ENOMEM; memset(result, 0, resultsize); fd = open(path, O_RDONLY); if (fd < 0) { ret = fd; goto free_out; } length = read(fd, result, resultsize-1); close(fd); if (length < 0) { ret = -1; goto free_out; } result[length] = '\0'; if (result[length-1] == '\n') result[length-1] = '\0'; *output = result; ret = 0; goto out; free_out: free(result); out: return ret; } biosdevname-0.4.1/src/read_proc.c0000644000000000000000000000403211766436556013612 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. * Copied from from net-tools-1.60, also under the GNU GPL v2, * and modified for use here. */ #define _GNU_SOURCE #include #include #include #include #include #include "eths.h" #define _PATH_PROCNET_DEV "/proc/net/dev" static struct network_device *add_interface(struct libbiosdevname_state *state, const char *name) { struct network_device *i; i = malloc(sizeof(*i)); if (!i) return NULL; memset(i, 0, sizeof(*i)); INIT_LIST_HEAD(&i->node); strncpy(i->kernel_name, name, sizeof(i->kernel_name)); list_add_tail(&i->node, &state->network_devices); return i; } static char *get_name(char **namep, char *p) { int count = 0; char *name; while (isspace(*p)) p++; name = *namep = p; while (*p) { if (isspace(*p)) break; if (*p == ':') { /* could be an alias */ char *dot = p, *dotname = name; *name++ = *p++; count++; while (isdigit(*p)){ *name++ = *p++; count++; if (count == (IFNAMSIZ-1)) break; } if (*p != ':') { /* it wasn't, backup */ p = dot; name = dotname; } if (*p == '\0') return NULL; p++; break; } *name++ = *p++; count++; if (count == (IFNAMSIZ-1)) break; } *name++ = '\0'; return p; } int get_interfaces(struct libbiosdevname_state *state) { FILE *fh; int err; char *line = NULL; size_t linelen = 0; fh = fopen(_PATH_PROCNET_DEV, "r"); if (!fh) { fprintf(stderr, "Error: cannot open %s (%s).\n", _PATH_PROCNET_DEV, strerror(errno)); return 1; } if (getline(&line, &linelen, fh) == -1 /* eat line */ || getline(&line, &linelen, fh) == -1) { err = -1; goto out; } err = 0; while (getline(&line, &linelen, fh) != -1) { char *s, *name; s = get_name(&name, line); add_interface(state, name); } if (ferror(fh)) err = -1; out: free(line); fclose(fh); return err; } biosdevname-0.4.1/src/libbiosdevname.h0000644000000000000000000000113611766436556014646 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #ifndef LIBBIOSDEVNAME_H_INCLUDED #define LIBBIOSDEVNAME_H_INCLUDED enum namingpolicy { physical, all_ethN, }; extern void * setup_bios_devices(int namingpolicy, const char *prefix); extern void cleanup_bios_devices(void *cookie); extern char * kern_to_bios(void *cookie, const char *devname); extern void unparse_bios_devices(void *cookie); extern void unparse_bios_device_by_name(void *cookie, const char *name); #endif /* LIBBIOSDEVNAME_H_INCLUDED */ biosdevname-0.4.1/src/pirq.h0000644000000000000000000000247011766436556012640 00000000000000#ifndef PIRQ_H_INCLUDED #define PIRQ_H_INCLUDED /* * PCI IRQ Routing Table dumper * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * * Based on the description of said table found at * http://www.microsoft.com/hwdev/busbios/pciirq.htm * Licensed under the GNU General Public license, version 2. */ #include #include typedef unsigned char __u8; typedef unsigned short int __u16; typedef unsigned int __u32; struct slot_entry { __u8 bus; __u8 device; __u8 inta_link; __u16 inta_irq; __u8 intb_link; __u16 intb_irq; __u8 intc_link; __u16 intc_irq; __u8 intd_link; __u16 intd_irq; __u8 slot; __u8 reserved; } __attribute__((packed)); struct routing_table { __u32 signature; __u16 version; __u16 size; __u8 router_bus; __u8 router_devfn; __u16 exclusive_irqs; __u32 compatable_router; __u32 miniport_data; __u8 reserved[11]; __u8 checksum; struct slot_entry slot[1]; } __attribute__((packed)); #define PCI_DEVICE(devfn) (((devfn) >> 3) & 0x1f) #define PCI_FUNC(devfn) ((devfn) & 0x07) extern struct routing_table * pirq_alloc_read_table(void); extern void pirq_free_table(struct routing_table *table); extern int pirq_pci_dev_to_slot(struct routing_table *table, int domain, int bus, int dev); #endif /* PIRQ_H_INCLUDED */ biosdevname-0.4.1/src/pirq.c0000644000000000000000000000700011766436556012625 00000000000000/* * PCI IRQ Routing Table dumper * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * * Based on the description of said table found at * http://www.microsoft.com/hwdev/busbios/pciirq.htm * Licensed under the GNU General Public license, version 2. */ #include #include #include #include #include #include #include #include #include "pirq.h" extern int nopirq; /* If unknown, use INT_MAX so they get sorted last */ int pirq_pci_dev_to_slot(struct routing_table *table, int domain, int bus, int dev) { int i, num_slots; struct slot_entry *slot; if (!table) return INT_MAX; if (domain != 0) /* can't represent non-zero domains in PIRQ */ return INT_MAX; num_slots = (table->size - 32) / sizeof(*slot); for (i=0; islot[i]; if (slot->bus == bus && PCI_DEVICE(slot->device) == dev) { if (slot->slot >= '1' && slot->slot <= '9') return slot->slot - '0'; return slot->slot; } } return INT_MAX; } struct routing_table * pirq_alloc_read_table() { struct routing_table *table = NULL; uint16_t size = 0; uint8_t checksum = 0; int i; void *mem; off_t offset=0L; int fd; /* Skip PIRQ table parsing */ if (nopirq) { return NULL; } fd = open("/dev/mem", O_RDONLY); if(fd==-1) return NULL; mem = mmap(0, 64*1024, PROT_READ, MAP_SHARED, fd, 0xF0000L); if (mem == (void *)-1LL) goto out; while( offset < 0xFFFF) { if(memcmp(mem+offset, "$PIR", 4)==0) { table = (struct routing_table *)(mem+offset); size = table->size; /* quick sanity checks */ if (size == 0) { table = NULL; break; } /* Version must be 1.0 */ if (!((table->version >> 8) == 1 && (table->version & 0xFF) == 0)) { table = NULL; break; } table = malloc(size); if (!table) break; memcpy(table, mem+offset, size); for (i=0; islot, slot->bus, PCI_DEVICE(slot->device)); printf("INTA link %x irq %x ", slot->inta_link, slot->inta_irq); printf("B link %x irq %x ", slot->intb_link, slot->intb_irq); printf("C link %x irq %x ", slot->intc_link, slot->intc_irq); printf("D link %x irq %x ", slot->intd_link, slot->intd_irq); printf("\n"); } static void pirq_unparse_routing_table(struct routing_table *table) { int i, num_slots; struct slot_entry *slot; char buf[5]; buf[4] = 0; memcpy(buf, &table->signature, 4); printf("PCI IRQ Routing Table\n"); printf("Signature: %s\n", buf); printf("Version : %x\n", table->version); printf("Size : %xh\n", table->size); printf("Bus : %x\n", table->router_bus); printf("DevFn : %x\n", table->router_devfn); printf("Exclusive IRQs : %x\n", table->exclusive_irqs); printf("Compatible Router: %x\n", table->compatable_router); num_slots = (table->size - 32) / sizeof(*slot); slot = &table->slot[0]; for (i=0; i * Licensed under the GNU General Public license, version 2. */ #ifndef BIOS_DEVICE_H_INCLUDED #define BIOS_DEVICE_H_INCLUDED #include #include "list.h" #include "eths.h" #include "pci.h" #include "naming_policy.h" struct bios_device { struct list_head node; struct network_device *netdev; struct pci_device *pcidev; char *bios_name; int duplicate; int slot_num; int port_num; }; static inline int is_pci(const struct bios_device *dev) { return dev->pcidev != NULL; } #endif /* BIOS_DEVICE_H_INCLUDED */ biosdevname-0.4.1/src/bios_dev_name.h0000644000000000000000000000062111766436666014455 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #ifndef GLUE_H_INCLUDED #define GLUE_H_INCLUDED struct bios_dev_name_opts { int argc; char **argv; int optind; int sortroutine; int namingpolicy; const char *prefix; unsigned int debug:1; unsigned int interface:1; }; #endif /* GLUE_H_INCLUDED */ biosdevname-0.4.1/src/eths.h0000644000000000000000000000311011766436666012622 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #ifndef __ETHS_H_INCLUDED #define __ETHS_H_INCLUDED #include #include /* Bogus */ #undef MAX_ADDR_LEN #define MAX_ADDR_LEN 32 #include "list.h" #include "ethtool-util.h" #include "state.h" struct network_device { struct list_head node; char kernel_name[IFNAMSIZ]; /* ethN */ unsigned char perm_addr[MAX_ADDR_LEN]; unsigned char dev_addr[MAX_ADDR_LEN]; /* mutable MAC address, not unparsed */ struct ethtool_drvinfo drvinfo; int drvinfo_valid; int arphrd_type; /* e.g. ARPHDR_ETHER */ int hardware_claimed; /* true when recognized as PCI or PCMCIA and added to list of bios_devices */ int ifindex; }; extern void get_eths(struct libbiosdevname_state *state); extern void free_eths(struct libbiosdevname_state *state); extern int unparse_network_device(char *buf, const int size, struct network_device *dev); extern struct network_device * find_net_device_by_bus_info(struct libbiosdevname_state *state, const char *bus_info); extern int is_ethernet(struct network_device *dev); extern int zero_mac(const void *addr); #define min(a,b) ((a) <= (b) ? (a) : (b)) static inline void claim_netdev(struct network_device *dev) { dev->hardware_claimed = 1; } static inline int netdev_is_claimed(const struct network_device *dev) { return dev->hardware_claimed != 0; } static inline int drvinfo_valid(const struct network_device *dev) { return dev->drvinfo_valid != 0; } #endif /* __ETHS_H_INCLUDED */ biosdevname-0.4.1/src/eths.c0000644000000000000000000001370011766436666012623 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ethtool-util.h" #include "pci.h" #include "eths.h" #include "state.h" /* Display an Ethernet address in readable format. */ char *pr_ether(char *buf, const int size, const unsigned char *s) { snprintf(buf, size, "%02X:%02X:%02X:%02X:%02X:%02X", (s[0] & 0377), (s[1] & 0377), (s[2] & 0377), (s[3] & 0377), (s[4] & 0377), (s[5] & 0377) ); return (buf); } static int eths_get_ifindex(const char *devname, int *ifindex) { int fd, err; struct ifreq ifr; memset(&ifr, 0, sizeof(ifr)); strncpy(ifr.ifr_name, devname, sizeof(ifr.ifr_name)); /* Open control socket. */ fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0) { perror("Cannot get control socket"); return 1; } err = ioctl(fd, SIOCGIFINDEX, &ifr); if (!err) { *ifindex = ifr.ifr_ifindex; } close(fd); return err; } static int eths_get_hwaddr(const char *devname, unsigned char *buf, int size, int *type) { int fd, err; struct ifreq ifr; memset(&ifr, 0, sizeof(ifr)); strncpy(ifr.ifr_name, devname, sizeof(ifr.ifr_name)); /* Open control socket. */ fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0) { perror("Cannot get control socket"); return 1; } err = ioctl(fd, SIOCGIFHWADDR, &ifr); if (!err) { memcpy(buf, ifr.ifr_hwaddr.sa_data, min(size, sizeof(ifr.ifr_hwaddr.sa_data))); *type = ifr.ifr_hwaddr.sa_family; } close(fd); return err; } static int eths_get_info(const char *devname, struct ethtool_drvinfo *drvinfo) { int fd, err; struct ifreq ifr; /* Setup our control structures. */ memset(&ifr, 0, sizeof(ifr)); strncpy(ifr.ifr_name, devname, sizeof(ifr.ifr_name)); /* Open control socket. */ fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0) { perror("Cannot get control socket"); return 1; } drvinfo->cmd = ETHTOOL_GDRVINFO; ifr.ifr_data = (caddr_t)drvinfo; err = ioctl(fd, SIOCETHTOOL, &ifr); close(fd); return err; } static int eths_get_permaddr(const char *devname, unsigned char *buf, int size) { int fd, err; struct ifreq ifr; struct ethtool_perm_addr *permaddr; int s = sizeof(*permaddr) + MAX_ADDR_LEN; permaddr = malloc(s); if (!permaddr) return 1; memset(permaddr, 0, s); /* Setup our control structures. */ memset(&ifr, 0, sizeof(ifr)); strncpy(ifr.ifr_name, devname, sizeof(ifr.ifr_name)); /* Open control socket. */ fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0) { perror("Cannot get control socket"); return 1; } permaddr->cmd = ETHTOOL_GPERMADDR; permaddr->size = MAX_ADDR_LEN; ifr.ifr_data = (caddr_t)permaddr; err = ioctl(fd, SIOCETHTOOL, &ifr); if (err < 0) { close(fd); return err; } memcpy(buf, permaddr->data, min(permaddr->size, size)); free(permaddr); close(fd); return err; } static void fill_eth_dev(struct network_device *dev) { int rc; eths_get_ifindex(dev->kernel_name, &dev->ifindex); eths_get_hwaddr(dev->kernel_name, dev->dev_addr, sizeof(dev->dev_addr), &dev->arphrd_type); eths_get_permaddr(dev->kernel_name, dev->perm_addr, sizeof(dev->perm_addr)); rc = eths_get_info(dev->kernel_name, &dev->drvinfo); if (rc == 0) dev->drvinfo_valid = 1; } void free_eths(struct libbiosdevname_state *state) { struct network_device *pos, *next; list_for_each_entry_safe(pos, next, &state->network_devices, node) { list_del(&pos->node); free(pos); } } /* read_proc.c */ extern int get_interfaces(struct libbiosdevname_state *state); void get_eths(struct libbiosdevname_state *state) { struct network_device *pos; get_interfaces(state); list_for_each_entry(pos, &state->network_devices, node) { fill_eth_dev(pos); } } int zero_mac(const void *addr) { char zero_mac[MAX_ADDR_LEN]; memset(zero_mac, 0, sizeof(zero_mac)); return !memcmp(zero_mac, addr, sizeof(zero_mac)); } int unparse_network_device(char *buf, const int size, struct network_device *dev) { char buffer[40]; char *s = buf; s += snprintf(s, size-(s-buf), "Kernel name: %s\n", dev->kernel_name); if (!zero_mac(dev->perm_addr)) s += snprintf(s, size-(s-buf), "Permanent MAC: %s\n", pr_ether(buffer, sizeof(buffer), dev->perm_addr)); s += snprintf(s, size-(s-buf), "Assigned MAC : %s\n", pr_ether(buffer, sizeof(buffer), dev->dev_addr)); s += snprintf(s, size-(s-buf), "ifIndex: %d\n", dev->ifindex); if (drvinfo_valid(dev)) { s += snprintf(s, size-(s-buf), "Driver: %s\n", dev->drvinfo.driver); s += snprintf(s, size-(s-buf), "Driver version: %s\n", dev->drvinfo.version); s += snprintf(s, size-(s-buf), "Firmware version: %s\n", dev->drvinfo.fw_version); s += snprintf(s, size-(s-buf), "Bus Info: %s\n", dev->drvinfo.bus_info); } return (s-buf); }; struct network_device * find_net_device_by_bus_info(struct libbiosdevname_state *state, const char *bus_info) { struct network_device *n; list_for_each_entry(n, &state->network_devices, node) { if (!strncmp(n->drvinfo.bus_info, bus_info, sizeof(n->drvinfo.bus_info))) return n; } return NULL; } int is_ethernet(struct network_device *dev) { int i; int rc = 0; /* FIXME: /sys/class/net/$kernel_name/device will be a symlink if there's underlying hardware, * or not exist if it's virtual. Try using that if this isn't good enough already. */ /* No bus means not visible to BIOS */ if (strncmp("N/A", dev->drvinfo.bus_info, sizeof(dev->drvinfo.bus_info)) == 0) goto out; const char *nonethernet_drivers[] = { "bonding", "bridge", "openvswitch", "tun", }; for (i=0; idrvinfo.driver, nonethernet_drivers[i], sizeof(dev->drvinfo.driver)) == 0) goto out; } rc = dev->arphrd_type == ARPHRD_ETHER; out: return rc; } biosdevname-0.4.1/src/state.h0000644000000000000000000000103711770171116012762 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #ifndef LIBBIOSDEVICE_STATE_H_INCLUDED #define LIBBIOSDEVICE_STATE_H_INCLUDED #include #include "list.h" #include "pirq.h" struct libbiosdevname_state { struct list_head bios_devices; struct list_head pci_devices; struct list_head network_devices; struct list_head slots; struct pci_access *pacc; struct routing_table *pirq_table; }; #endif /* LIBBIOSDEVICESTATE_H_INCLUDED */ biosdevname-0.4.1/src/ethtool-util.h0000644000000000000000000000070111766436556014311 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #ifndef ETHTOOL_UTIL_H__ #define ETHTOOL_UTIL_H__ #include #include #if ULONG_MAX > 0xffffffff typedef unsigned long u64; #else typedef unsigned long long u64; #endif #include "ethtool-copy.h" int ethtool_get_info(const char *devname, struct ethtool_drvinfo *drvinfo); #endif biosdevname-0.4.1/src/list.h0000644000000000000000000003065611766436556012647 00000000000000/* * Copyright (c) 2006 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. * Copied from the Linux kernel version 2.6.18, modfied for use here. */ #ifndef _LINUX_LIST_H #define _LINUX_LIST_H #include /** * container_of - cast a member of a structure out to the containing structure * @ptr: the pointer to the member. * @type: the type of the container struct this is embedded in. * @member: the name of the member within the struct. * */ #define container_of(ptr, type, member) ({ \ const typeof( ((type *)0)->member ) *__mptr = (ptr); \ (type *)( (char *)__mptr - offsetof(type,member) );}) /* * Simple doubly linked list implementation, from Linux kernel 2.6.18 * * Some of the internal functions ("__xxx") are useful when * manipulating whole lists rather than single entries, as * sometimes we already know the next/prev entries and we can * generate better code by using them directly rather than * using the generic single-entry routines. */ struct list_head { struct list_head *next, *prev; }; #define LIST_HEAD_INIT(name) { &(name), &(name) } #define LIST_HEAD(name) \ struct list_head name = LIST_HEAD_INIT(name) static inline void INIT_LIST_HEAD(struct list_head *list) { list->next = list; list->prev = list; } /* * Insert a new entry between two known consecutive entries. * * This is only for internal list manipulation where we know * the prev/next entries already! */ static inline void __list_add(struct list_head *new, struct list_head *prev, struct list_head *next) { next->prev = new; new->next = next; new->prev = prev; prev->next = new; } /** * list_add - add a new entry * @new: new entry to be added * @head: list head to add it after * * Insert a new entry after the specified head. * This is good for implementing stacks. */ static inline void list_add(struct list_head *new, struct list_head *head) { __list_add(new, head, head->next); } /** * list_add_tail - add a new entry * @new: new entry to be added * @head: list head to add it before * * Insert a new entry before the specified head. * This is useful for implementing queues. */ static inline void list_add_tail(struct list_head *new, struct list_head *head) { __list_add(new, head->prev, head); } /* * Delete a list entry by making the prev/next entries * point to each other. * * This is only for internal list manipulation where we know * the prev/next entries already! */ static inline void __list_del(struct list_head * prev, struct list_head * next) { next->prev = prev; prev->next = next; } /** * list_del - deletes entry from list. * @entry: the element to delete from the list. * Note: list_empty on entry does not return true after this, the entry is * in an undefined state. */ static inline void list_del(struct list_head *entry) { __list_del(entry->prev, entry->next); entry->next = NULL; entry->prev = NULL; } /** * list_replace - replace old entry by new one * @old : the element to be replaced * @new : the new element to insert * Note: if 'old' was empty, it will be overwritten. */ static inline void list_replace(struct list_head *old, struct list_head *new) { new->next = old->next; new->next->prev = new; new->prev = old->prev; new->prev->next = new; } static inline void list_replace_init(struct list_head *old, struct list_head *new) { list_replace(old, new); INIT_LIST_HEAD(old); } /** * list_del_init - deletes entry from list and reinitialize it. * @entry: the element to delete from the list. */ static inline void list_del_init(struct list_head *entry) { __list_del(entry->prev, entry->next); INIT_LIST_HEAD(entry); } /** * list_move - delete from one list and add as another's head * @list: the entry to move * @head: the head that will precede our entry */ static inline void list_move(struct list_head *list, struct list_head *head) { __list_del(list->prev, list->next); list_add(list, head); } /** * list_move_tail - delete from one list and add as another's tail * @list: the entry to move * @head: the head that will follow our entry */ static inline void list_move_tail(struct list_head *list, struct list_head *head) { __list_del(list->prev, list->next); list_add_tail(list, head); } /** * list_is_last - tests whether @list is the last entry in list @head * @list: the entry to test * @head: the head of the list */ static inline int list_is_last(const struct list_head *list, const struct list_head *head) { return list->next == head; } /** * list_empty - tests whether a list is empty * @head: the list to test. */ static inline int list_empty(const struct list_head *head) { return head->next == head; } /** * list_empty_careful - tests whether a list is empty and not being modified * @head: the list to test * * Description: * tests whether a list is empty _and_ checks that no other CPU might be * in the process of modifying either member (next or prev) * * NOTE: using list_empty_careful() without synchronization * can only be safe if the only activity that can happen * to the list entry is list_del_init(). Eg. it cannot be used * if another CPU could re-list_add() it. */ static inline int list_empty_careful(const struct list_head *head) { struct list_head *next = head->next; return (next == head) && (next == head->prev); } static inline void __list_splice(struct list_head *list, struct list_head *head) { struct list_head *first = list->next; struct list_head *last = list->prev; struct list_head *at = head->next; first->prev = head; head->next = first; last->next = at; at->prev = last; } /** * list_splice - join two lists * @list: the new list to add. * @head: the place to add it in the first list. */ static inline void list_splice(struct list_head *list, struct list_head *head) { if (!list_empty(list)) __list_splice(list, head); } /** * list_splice_init - join two lists and reinitialise the emptied list. * @list: the new list to add. * @head: the place to add it in the first list. * * The list at @list is reinitialised */ static inline void list_splice_init(struct list_head *list, struct list_head *head) { if (!list_empty(list)) { __list_splice(list, head); INIT_LIST_HEAD(list); } } /** * list_entry - get the struct for this entry * @ptr: the &struct list_head pointer. * @type: the type of the struct this is embedded in. * @member: the name of the list_struct within the struct. */ #define list_entry(ptr, type, member) \ container_of(ptr, type, member) /** * list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. * @head: the head for your list. */ #define list_for_each(pos, head) \ for (pos = (head)->next; pos != (head); \ pos = pos->next) /** * __list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. * @head: the head for your list. * * This variant differs from list_for_each() in that it's the * simplest possible list iteration code, no prefetching is done. * Use this for code that knows the list to be very short (empty * or 1 entry) most of the time. */ #define __list_for_each(pos, head) \ for (pos = (head)->next; pos != (head); pos = pos->next) /** * list_for_each_prev - iterate over a list backwards * @pos: the &struct list_head to use as a loop cursor. * @head: the head for your list. */ #define list_for_each_prev(pos, head) \ for (pos = (head)->prev; pos != (head); \ pos = pos->prev) /** * list_for_each_safe - iterate over a list safe against removal of list entry * @pos: the &struct list_head to use as a loop cursor. * @n: another &struct list_head to use as temporary storage * @head: the head for your list. */ #define list_for_each_safe(pos, n, head) \ for (pos = (head)->next, n = pos->next; pos != (head); \ pos = n, n = pos->next) /** * list_for_each_entry - iterate over list of given type * @pos: the type * to use as a loop cursor. * @head: the head for your list. * @member: the name of the list_struct within the struct. */ #define list_for_each_entry(pos, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member); \ &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member)) /** * list_for_each_entry_reverse - iterate backwards over list of given type. * @pos: the type * to use as a loop cursor. * @head: the head for your list. * @member: the name of the list_struct within the struct. */ #define list_for_each_entry_reverse(pos, head, member) \ for (pos = list_entry((head)->prev, typeof(*pos), member); \ &pos->member != (head); \ pos = list_entry(pos->member.prev, typeof(*pos), member)) /** * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue * @pos: the type * to use as a start point * @head: the head of the list * @member: the name of the list_struct within the struct. * * Prepares a pos entry for use as a start point in list_for_each_entry_continue. */ #define list_prepare_entry(pos, head, member) \ ((pos) ? : list_entry(head, typeof(*pos), member)) /** * list_for_each_entry_continue - continue iteration over list of given type * @pos: the type * to use as a loop cursor. * @head: the head for your list. * @member: the name of the list_struct within the struct. * * Continue to iterate over list of given type, continuing after * the current position. */ #define list_for_each_entry_continue(pos, head, member) \ for (pos = list_entry(pos->member.next, typeof(*pos), member); \ &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member)) /** * list_for_each_entry_from - iterate over list of given type from the current point * @pos: the type * to use as a loop cursor. * @head: the head for your list. * @member: the name of the list_struct within the struct. * * Iterate over list of given type, continuing from current position. */ #define list_for_each_entry_from(pos, head, member) \ for (; &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member)) /** * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry * @pos: the type * to use as a loop cursor. * @n: another type * to use as temporary storage * @head: the head for your list. * @member: the name of the list_struct within the struct. */ #define list_for_each_entry_safe(pos, n, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member), \ n = list_entry(pos->member.next, typeof(*pos), member); \ &pos->member != (head); \ pos = n, n = list_entry(n->member.next, typeof(*n), member)) /** * list_for_each_entry_safe_continue * @pos: the type * to use as a loop cursor. * @n: another type * to use as temporary storage * @head: the head for your list. * @member: the name of the list_struct within the struct. * * Iterate over list of given type, continuing after current point, * safe against removal of list entry. */ #define list_for_each_entry_safe_continue(pos, n, head, member) \ for (pos = list_entry(pos->member.next, typeof(*pos), member), \ n = list_entry(pos->member.next, typeof(*pos), member); \ &pos->member != (head); \ pos = n, n = list_entry(n->member.next, typeof(*n), member)) /** * list_for_each_entry_safe_from * @pos: the type * to use as a loop cursor. * @n: another type * to use as temporary storage * @head: the head for your list. * @member: the name of the list_struct within the struct. * * Iterate over list of given type from current point, safe against * removal of list entry. */ #define list_for_each_entry_safe_from(pos, n, head, member) \ for (n = list_entry(pos->member.next, typeof(*pos), member); \ &pos->member != (head); \ pos = n, n = list_entry(n->member.next, typeof(*n), member)) /** * list_for_each_entry_safe_reverse * @pos: the type * to use as a loop cursor. * @n: another type * to use as temporary storage * @head: the head for your list. * @member: the name of the list_struct within the struct. * * Iterate backwards over list of given type, safe against removal * of list entry. */ #define list_for_each_entry_safe_reverse(pos, n, head, member) \ for (pos = list_entry((head)->prev, typeof(*pos), member), \ n = list_entry(pos->member.prev, typeof(*pos), member); \ &pos->member != (head); \ pos = n, n = list_entry(n->member.prev, typeof(*n), member)) #endif /* _LINUX_LIST_H */ biosdevname-0.4.1/src/Makefile.am0000644000000000000000000000137111766436556013547 00000000000000INCLUDES = -I.. AM_CFLAGS = -Wall -fno-strict-aliasing man_MANS = biosdevname.1 sbin_PROGRAMS = src/biosdevname src_biosdevname_SOURCES = \ src/bios_dev_name.c \ src/bios_device.c \ src/pirq.c \ src/pci.c \ src/eths.c \ src/read_proc.c \ src/naming_policy.c \ src/sysfs.c \ src/dmidecode/dmidecode.c \ src/dmidecode/dmioem.c \ src/dmidecode/util.c src_biosdevname_LDADD = -lz -lpci EXTRA_DIST += \ src/bios_dev_name.h \ src/bios_device.h \ src/pirq.h \ src/pci.h \ src/eths.h \ src/ethtool-util.h \ src/ethtool-copy.h \ src/list.h \ src/naming_policy.h \ src/state.h \ src/sysfs.h \ src/libbiosdevname.h \ src/dmidecode/config.h \ src/dmidecode/dmidecode.h \ src/dmidecode/dmioem.h \ src/dmidecode/types.h \ src/dmidecode/util.h biosdevname-0.4.1/src/sysfs.h0000644000000000000000000000015611766436556013033 00000000000000extern int sysfs_path_is_file(const char *path); extern int sysfs_read_file(const char *path, char **output); biosdevname-0.4.1/src/naming_policy.c0000644000000000000000000000567211770171116014476 00000000000000/* * Copyright (c) 2006, 2007 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #include #include #include #include "bios_device.h" #include "naming_policy.h" #include "libbiosdevname.h" #include "state.h" #include "dmidecode/dmidecode.h" static void use_all_ethN(const struct libbiosdevname_state *state) { struct bios_device *dev; unsigned int i=0; char buffer[IFNAMSIZ]; memset(buffer, 0, sizeof(buffer)); list_for_each_entry(dev, &state->bios_devices, node) { if (dev->netdev) { snprintf(buffer, sizeof(buffer), "eth%u", i++); dev->bios_name = strdup(buffer); } } } static void use_physical(const struct libbiosdevname_state *state, const char *prefix) { struct bios_device *dev; char buffer[IFNAMSIZ]; char location[IFNAMSIZ]; char port[IFNAMSIZ]; char interface[IFNAMSIZ]; unsigned int portnum=0; int known=0; struct pci_device *vf; list_for_each_entry(dev, &state->bios_devices, node) { known = 0; memset(buffer, 0, sizeof(buffer)); memset(location, 0, sizeof(location)); memset(port, 0, sizeof(port)); memset(interface, 0, sizeof(interface)); if (is_pci(dev)) { vf = dev->pcidev; if (dev->pcidev->physical_slot == 0) { /* embedded devices only */ portnum = INT_MAX; /* Use master VPD device if available */ if (vf->vpd_pf) vf = vf->vpd_pf; if (vf->pf) vf = vf->pf; if (vf->uses_sysfs & HAS_SYSFS_INDEX) portnum = vf->sysfs_index; else if (vf->uses_smbios & HAS_SMBIOS_INSTANCE && is_pci_smbios_type_ethernet(vf)) portnum = vf->smbios_instance; else if (dev->port_num != -1) portnum = dev->port_num; if (portnum != INT_MAX) { snprintf(location, sizeof(location), "%s%u", prefix, portnum); known=1; } } else if (dev->pcidev->physical_slot < PHYSICAL_SLOT_UNKNOWN) { snprintf(location, sizeof(location), "p%u", dev->pcidev->physical_slot); if (dev->pcidev->vpd_port < INT_MAX) portnum = dev->pcidev->vpd_port; else if (dev->port_num != -1) portnum = dev->port_num; else if (!dev->pcidev->is_sriov_virtual_function) portnum = dev->pcidev->index_in_slot; else portnum = dev->pcidev->pf->index_in_slot; snprintf(port, sizeof(port), "p%u", portnum); known=1; } if (dev->pcidev->is_sriov_virtual_function) snprintf(interface, sizeof(interface), "_%u", dev->pcidev->vf_index); else if (dev->pcidev->vpd_pfi < INT_MAX) snprintf(interface, sizeof(interface), "_%u", dev->pcidev->vpd_pfi); if (known) { snprintf(buffer, sizeof(buffer), "%s%s%s", location, port, interface); dev->bios_name = strdup(buffer); } } } } int assign_bios_network_names(const struct libbiosdevname_state *state, int policy, const char *prefix) { int rc = 0; switch (policy) { case all_ethN: use_all_ethN(state); break; case physical: default: use_physical(state, prefix); break; } return rc; } biosdevname-0.4.1/src/pci.c0000644000000000000000000005422611770171116012420 00000000000000/* * Copyright (c) 2006-2010 Dell, Inc. * by Matt Domsch * Licensed under the GNU General Public license, version 2. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include #include #include #include #include #include "pci.h" #include "sysfs.h" #include "dmidecode/dmidecode.h" #include "pirq.h" extern int is_valid_smbios; #ifndef PCI_CB_CAPABILITY_LIST #define PCI_CB_CAPABILITY_LIST 0x14 #endif /* Borrowed from kernel vpd code */ #define PCI_VPD_LRDT 0x80 #define PCI_VPD_SRDT_END 0x78 #define PCI_VPD_SRDT_LEN_MASK 0x7 #define PCI_VPD_LRDT_TAG_SIZE 3 #define PCI_VPD_SRDT_TAG_SIZE 1 #define PCI_VPD_INFO_FLD_HDR_SIZE 3 static inline u16 pci_vpd_lrdt_size(const u8 *lrdt) { return (u16)lrdt[1] + ((u16)lrdt[2] << 8L); } static inline u8 pci_vpd_srdt_size(const u8* srdt) { return (*srdt) & PCI_VPD_SRDT_LEN_MASK; } static inline u8 pci_vpd_info_field_size(const u8 *info_field) { return info_field[2]; } static int pci_vpd_size(struct pci_device *pdev, int fd) { uint8_t buf[3], tag; int off; if (!is_pci_network(pdev)) return 0; off = 0; for(;;) { if (pread(fd, buf, 1, off) != 1) break; if (buf[0] & PCI_VPD_LRDT) { tag = buf[0]; if (pread(fd, buf, 3, off) != 3) break; off += PCI_VPD_LRDT_TAG_SIZE + pci_vpd_lrdt_size(buf); } else { tag = buf[0] & ~PCI_VPD_SRDT_LEN_MASK; off += PCI_VPD_SRDT_TAG_SIZE + pci_vpd_srdt_size(buf); } if (tag == 0 || tag == 0xFF || tag == PCI_VPD_SRDT_END) break; } return off; } static int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt) { int i; for (i = off; i < len;) { u8 val = buf[i]; if (val & PCI_VPD_LRDT) { if (i + PCI_VPD_LRDT_TAG_SIZE > len) break; if (val == rdt) return i; i += PCI_VPD_LRDT_TAG_SIZE + pci_vpd_lrdt_size(&buf[i]); } else { u8 tag = val & ~PCI_VPD_SRDT_LEN_MASK; if (tag == rdt) return i; if (tag == PCI_VPD_SRDT_END) break; i += PCI_VPD_SRDT_TAG_SIZE + pci_vpd_srdt_size(&buf[i]); } } return -1; } /* Search for matching key/subkey in the VPD data */ static int pci_vpd_find_info_subkey(const u8 *buf, unsigned int off, unsigned int len, const char *kw, const char *skw) { int i; for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off+len;) { /* Match key and subkey names, can use * for regex */ if ((kw[0] == '*' || buf[i+0] == kw[0]) && (kw[1] == '*' || buf[i+1] == kw[1]) && (skw[0] == '*' || !memcmp(&buf[i+3], skw, 3))) return i; i += PCI_VPD_INFO_FLD_HDR_SIZE + pci_vpd_info_field_size(&buf[i]); } return -1; } static int parse_vpd(struct libbiosdevname_state *state, struct pci_device *pdev, int len, unsigned char *vpd) { int i, j, k, isz, jsz, port, func, pfi; struct pci_device *vf; i = pci_vpd_find_tag(vpd, 0, len, 0x90); if (i < 0) return 1; isz = pci_vpd_lrdt_size(&vpd[i]); i += PCI_VPD_LRDT_TAG_SIZE; /* Lookup Version */ j = pci_vpd_find_info_subkey(vpd, i, isz, "**", "DSV"); if (j < 0) return 1; jsz = pci_vpd_info_field_size(&vpd[j]); j += PCI_VPD_INFO_FLD_HDR_SIZE; if (memcmp(vpd+j+3, "1028VPDR.VER1.0", 15)) return 1; /* Lookup Port Mappings */ j = pci_vpd_find_info_subkey(vpd, i, isz, "**", "DCM"); if (j < 0) return 1; jsz = pci_vpd_info_field_size(&vpd[j]); j += PCI_VPD_INFO_FLD_HDR_SIZE; for (k=3; kpci_dev->domain, pdev->pci_dev->bus, pdev->pci_dev->dev, func)) != NULL) { if (vf->vpd_port == INT_MAX) { vf->vpd_port = port; vf->vpd_pfi = pfi; } } } return 0; } /* Read and parse PCI VPD section if it exists */ static int read_pci_vpd(struct libbiosdevname_state *state, struct pci_device *pdev) { char path[PATH_MAX]; char pci_name[16]; int fd, rc=1; unsigned char *vpd; off_t size; ssize_t nrd; unparse_pci_name(pci_name, sizeof(pci_name), pdev->pci_dev); snprintf(path, sizeof(path), "/sys/bus/pci/devices/%s/vpd", pci_name); if ((fd = open(path, O_RDONLY|O_SYNC)) >= 0) { size = pci_vpd_size(pdev, fd); if (size > 0) { vpd = malloc(size); if (vpd != NULL) { if ((nrd = pread(fd, vpd, size, 0)) > 0) rc = parse_vpd(state, pdev, nrd, vpd); free(vpd); } } close(fd); } return rc; } static void set_pci_vpd_instance(struct libbiosdevname_state *state) { struct pci_device *dev, *dev2; int fd; char sys_vendor[10] = {0}; /* Read VPD-R on Dell systems only */ if ((fd = open("/sys/devices/virtual/dmi/id/sys_vendor", O_RDONLY)) >= 0) { if (read(fd, sys_vendor, 9) != 9) return; if (strncmp(sys_vendor, "Dell Inc.", 9)) return; } else return; /* Read VPD information for each device */ list_for_each_entry(dev, &state->pci_devices, node) { /* RedHat bugzilla 801885, 789635, 781572 */ if (dev->pci_dev->vendor_id == 0x1969 || dev->pci_dev->vendor_id == 0x168c) continue; read_pci_vpd(state, dev); } /* Now match VPD master device */ list_for_each_entry(dev, &state->pci_devices, node) { if (dev->vpd_port == INT_MAX) continue; list_for_each_entry(dev2, &state->pci_devices, node) { if (dev2->pci_dev->domain == dev->pci_dev->domain && dev2->pci_dev->bus == dev->pci_dev->bus && dev2->pci_dev->dev == dev->pci_dev->dev && dev2->vpd_port == dev->vpd_port) { dev2->vpd_count++; dev->vpd_pf = dev2; break; } } } /* Delete all VPD devices with single function */ list_for_each_entry(dev, &state->pci_devices, node) { if (dev->vpd_count == 1) { dev->vpd_port = INT_MAX; dev->vpd_pfi = INT_MAX; dev->vpd_pf = NULL; } } } static int pci_find_capability(struct pci_dev *p, int cap) { u16 status; u8 hdr, id; int pos, ttl = 48; status = pci_read_word(p, PCI_STATUS); if (!(status & PCI_STATUS_CAP_LIST)) return 0; hdr = pci_read_byte(p, PCI_HEADER_TYPE); switch(hdr & 0x7F) { case PCI_HEADER_TYPE_NORMAL: case PCI_HEADER_TYPE_BRIDGE: pos = PCI_CAPABILITY_LIST; break; case PCI_HEADER_TYPE_CARDBUS: pos = PCI_CB_CAPABILITY_LIST; break; default: return 0; } while (ttl--) { pos = pci_read_byte(p, pos); if (pos < 0x40) break; pos &= ~3; id = pci_read_byte(p, pos+PCI_CAP_LIST_ID); if (id == 0xFF) break; if (id == cap) return pos; pos += PCI_CAP_LIST_NEXT; } return 0; } static struct pci_device * find_parent(struct libbiosdevname_state *state, struct pci_device *dev); static int pcie_get_slot(struct libbiosdevname_state *state, struct pci_device *p) { int pos; u32 slot, flag; while (p) { /* Return PCIE physical slot number */ if ((pos = pci_find_capability(p->pci_dev, PCI_CAP_ID_EXP)) != 0) { flag = pci_read_word(p->pci_dev, pos + PCI_EXP_FLAGS); slot = (pci_read_long(p->pci_dev, pos + PCI_EXP_SLTCAP) >> 19); if ((flag & PCI_EXP_FLAGS_SLOT) && slot) return slot; } p = find_parent(state, p); } return PHYSICAL_SLOT_UNKNOWN; } static int read_pci_sysfs_path(char *buf, size_t bufsize, const struct pci_dev *pdev) { char path[PATH_MAX]; char pci_name[16]; ssize_t size; unparse_pci_name(pci_name, sizeof(pci_name), pdev); snprintf(path, sizeof(path), "/sys/bus/pci/devices/%s", pci_name); size = readlink(path, buf, bufsize); if (size == -1) return 1; return 0; } static int read_pci_sysfs_physfn(char *buf, size_t bufsize, const struct pci_dev *pdev) { char path[PATH_MAX]; char pci_name[16]; ssize_t size; unparse_pci_name(pci_name, sizeof(pci_name), pdev); snprintf(path, sizeof(path), "/sys/bus/pci/devices/%s/physfn", pci_name); size = readlink(path, buf, bufsize); if (size == -1) return 1; return 0; } static int virtfn_filter(const struct dirent *dent) { return (!strncmp(dent->d_name,"virtfn",6)); } static int _read_virtfn_index(unsigned int *index, const char *path, const char *basename, const char *pci_name) { char buf[PATH_MAX], *b; char fullpath[PATH_MAX]; ssize_t size; unsigned int u=INT_MAX; int scanned, rc=1; snprintf(fullpath, sizeof(fullpath), "%s/%s", path, basename); size = readlink(fullpath, buf, sizeof(buf)); if (size > 0) { /* form is ../0000:05:10.0 */ b=buf+3; /* skip ../ */ if (strlen(b) == strlen(pci_name) && !strncmp(b, pci_name, strlen(pci_name))) { scanned = sscanf(basename, "virtfn%u", &u); if (scanned == 1) { rc = 0; *index = u; } } } return rc; } static int read_virtfn_index(unsigned int *index, const struct pci_dev *pdev) { char pci_name[16]; char path[PATH_MAX]; char cpath[PATH_MAX]; struct dirent **namelist; int n, rc=1; unparse_pci_name(pci_name, sizeof(pci_name), pdev); snprintf(path, sizeof(path), "/sys/bus/pci/devices/%s/physfn", pci_name); if (realpath(path, cpath) == NULL) return rc; n = scandir(cpath, &namelist, virtfn_filter, versionsort); if (n < 0) return rc; else { while (n--) { if (rc) rc = _read_virtfn_index(index, cpath, namelist[n]->d_name, pci_name); free(namelist[n]); } free(namelist); } return rc; } static int parse_pci_name(const char *s, int *domain, int *bus, int *dev, int *func) { int err; /* The domain part was added in 2.6 kernels. Test for that first. */ err = sscanf(s, "%x:%2x:%2x.%x", domain, bus, dev, func); if (err != 4) { err = sscanf(s, "%2x:%2x.%x", bus, dev, func); if (err != 3) { return 1; } } return 0; } static struct pci_dev * find_pdev_by_pci_name(struct pci_access *pacc, const char *s) { int domain=0, bus=0, device=0, func=0; if (parse_pci_name(s, &domain, &bus, &device, &func)) return NULL; return pci_get_dev(pacc, domain, bus, device, func); } static struct pci_device * find_physfn(struct libbiosdevname_state *state, struct pci_device *dev) { int rc; char path[PATH_MAX]; char *c; struct pci_dev *pdev; memset(path, 0, sizeof(path)); rc = read_pci_sysfs_physfn(path, sizeof(path), dev->pci_dev); if (rc != 0) return NULL; /* we get back a string like ../0000:05:0.0 where the last component is the parent device */ /* find the last backslash */ c = rindex(path, '/'); c++; pdev = find_pdev_by_pci_name(state->pacc, c); dev = find_dev_by_pci(state, pdev); return dev; } static int is_same_pci(const struct pci_dev *a, const struct pci_dev *b) { if (pci_domain_nr(a) == pci_domain_nr(b) && a->bus == b->bus && a->dev == b->dev && a->func == b->func) return 1; return 0; } static void try_add_vf_to_pf(struct libbiosdevname_state *state, struct pci_device *vf) { struct pci_device *pf; unsigned int index=0; int rc; pf = find_physfn(state, vf); if (!pf) return; list_add_tail(&vf->vfnode, &pf->vfs); rc = read_virtfn_index(&index, vf->pci_dev); if (!rc) { vf->vf_index = index; pf->is_sriov_physical_function = 1; } vf->pf = pf; vf->physical_slot = pf->physical_slot; } static struct pci_device * find_parent(struct libbiosdevname_state *state, struct pci_device *dev) { int rc; char path[PATH_MAX]; char *c; struct pci_device *physfn; struct pci_dev *pdev; memset(path, 0, sizeof(path)); /* if this device has a physfn pointer, then treat _that_ as the parent */ physfn = find_physfn(state, dev); if (physfn) { dev->is_sriov_virtual_function=1; return physfn; } rc = read_pci_sysfs_path(path, sizeof(path), dev->pci_dev); if (rc != 0) return NULL; /* we get back a string like ../../../devices/pci0000:00/0000:00:09.0/0000:05:17.4 where the last component is the device we asked for */ /* find the last backslash */ c = rindex(path, '/'); *c = '\0'; /* find the last backslash again */ c = rindex(path, '/'); c++; pdev = find_pdev_by_pci_name(state->pacc, c); if (pdev) { dev = find_dev_by_pci(state, pdev); return dev; } return NULL; } /* * Check our parents in case the device itself isn't listed * in the SMBIOS table. This has a problem, as * our parent bridge on a card may not be included * in the SMBIOS table. In that case, it falls back to "unknown". */ static inline int pci_dev_to_slot(struct libbiosdevname_state *state, struct pci_device *dev) { return dev->physical_slot; } static inline int pirq_dev_to_slot(struct libbiosdevname_state *state, struct pci_device *dev) { return pirq_pci_dev_to_slot(state->pirq_table, pci_domain_nr(dev->pci_dev), dev->pci_dev->bus, dev->pci_dev->dev); } static void dev_to_slot(struct libbiosdevname_state *state, struct pci_device *dev) { struct pci_device *d = dev; int slot; do { slot = pci_dev_to_slot(state, d); if (slot == PHYSICAL_SLOT_UNKNOWN && is_valid_smbios) slot = pcie_get_slot(state, d); if (slot == PHYSICAL_SLOT_UNKNOWN) slot = pirq_dev_to_slot(state, d); if (slot == PHYSICAL_SLOT_UNKNOWN) d = find_parent(state, d); } while (d && slot == PHYSICAL_SLOT_UNKNOWN); dev->physical_slot = slot; } static char *read_pci_sysfs_label(const struct pci_dev *pdev) { char path[PATH_MAX]; char pci_name[16]; int rc; char *label = NULL; unparse_pci_name(pci_name, sizeof(pci_name), pdev); snprintf(path, sizeof(path), "/sys/bus/pci/devices/%s/label", pci_name); rc = sysfs_read_file(path, &label); if (rc == 0) return label; return NULL; } static int read_pci_sysfs_index(unsigned int *index, const struct pci_dev *pdev) { char path[PATH_MAX]; char pci_name[16]; int rc; char *indexstr = NULL; unsigned int i; unparse_pci_name(pci_name, sizeof(pci_name), pdev); snprintf(path, sizeof(path), "/sys/bus/pci/devices/%s/index", pci_name); rc = sysfs_read_file(path, &indexstr); if (rc == 0) { rc = sscanf(indexstr, "%u", &i); if (rc == 1) { *index = i; return 0; } } return 1; } static void fill_pci_dev_sysfs(struct pci_device *dev, struct pci_dev *p) { int rc; unsigned int index = 0; char *label = NULL; char buf[PATH_MAX]; unparse_pci_name(buf, sizeof(buf), p); rc = read_pci_sysfs_index(&index, p); if (!rc) { dev->sysfs_index = index; dev->uses_sysfs |= HAS_SYSFS_INDEX; } label = read_pci_sysfs_label(p); if (label) { dev->sysfs_label = label; dev->uses_sysfs |= HAS_SYSFS_LABEL; } } static void add_pci_dev(struct libbiosdevname_state *state, struct pci_dev *p) { struct pci_device *dev; dev = malloc(sizeof(*dev)); if (!dev) { fprintf(stderr, "out of memory\n"); return; } memset(dev, 0, sizeof(*dev)); INIT_LIST_HEAD(&dev->node); INIT_LIST_HEAD(&dev->vfnode); INIT_LIST_HEAD(&dev->vfs); dev->pci_dev = p; dev->physical_slot = PHYSICAL_SLOT_UNKNOWN; dev->class = pci_read_word(p, PCI_CLASS_DEVICE); dev->vf_index = INT_MAX; dev->vpd_port = INT_MAX; dev->vpd_pfi = INT_MAX; dev->vpd_pf = NULL; fill_pci_dev_sysfs(dev, p); list_add(&dev->node, &state->pci_devices); } void free_pci_devices(struct libbiosdevname_state *state) { struct pci_device *pos, *next; list_for_each_entry_safe(pos, next, &state->pci_devices, node) { if (pos->smbios_label) free(pos->smbios_label); if (pos->sysfs_label) free(pos->sysfs_label); list_del(&pos->node); free(pos); } } int addslot(struct libbiosdevname_state *state, int slot) { struct slotlist *s; list_for_each_entry(s, &state->slots, node) { if (s->slot == slot) { return ++s->count; } } s = malloc(sizeof(*s)); INIT_LIST_HEAD(&s->node); s->slot = slot; s->count = 0; list_add(&s->node, &state->slots); return ++s->count; } static void set_pci_slots(struct libbiosdevname_state *state) { struct pci_device *dev; list_for_each_entry(dev, &state->pci_devices, node) { dev_to_slot(state, dev); } /* Get mapping for each slot */ list_for_each_entry(dev, &state->pci_devices, node) { if (dev->is_sriov_virtual_function || !is_pci_network(dev) || dev->vpd_port != INT_MAX) { continue; } if (dev->physical_slot == 0) { dev->embedded_index_valid = 1; dev->embedded_index = addslot(state, 0); } else if (dev->physical_slot != PHYSICAL_SLOT_UNKNOWN) { dev->index_in_slot = addslot(state, dev->physical_slot); } } } static void set_sriov_pf_vf(struct libbiosdevname_state *state) { struct pci_device *vf; list_for_each_entry(vf, &state->pci_devices, node) { if (!vf->is_sriov_virtual_function) continue; try_add_vf_to_pf(state, vf); } } /* * This sorts the PCI devices by breadth-first domain/bus/dev/fn. */ static int sort_pci(const struct pci_device *a, const struct pci_device *b) { if (pci_domain_nr(a->pci_dev) < pci_domain_nr(b->pci_dev)) return -1; else if (pci_domain_nr(a->pci_dev) > pci_domain_nr(b->pci_dev)) return 1; if (a->pci_dev->bus < b->pci_dev->bus) return -1; else if (a->pci_dev->bus > b->pci_dev->bus) return 1; if (a->pci_dev->dev < b->pci_dev->dev) return -1; else if (a->pci_dev->dev > b->pci_dev->dev) return 1; if (a->pci_dev->func < b->pci_dev->func) return -1; else if (a->pci_dev->func > b->pci_dev->func) return 1; return 0; } static void insertion_sort_devices(struct pci_device *a, struct list_head *list, int (*cmp)(const struct pci_device *, const struct pci_device *)) { struct pci_device *b; list_for_each_entry(b, list, node) { if (cmp(a, b) <= 0) { list_move_tail(&a->node, &b->node); return; } } list_move_tail(&a->node, list); } static void sort_device_list(struct libbiosdevname_state *state) { LIST_HEAD(sorted_devices); struct pci_device *dev, *tmp; list_for_each_entry_safe(dev, tmp, &state->pci_devices, node) { insertion_sort_devices(dev, &sorted_devices, sort_pci); } list_splice(&sorted_devices, &state->pci_devices); } int get_pci_devices(struct libbiosdevname_state *state) { struct pci_access *pacc; struct pci_dev *p; struct routing_table *table; int rc=0; table = pirq_alloc_read_table(); if (table) state->pirq_table = table; pacc = pci_alloc(); if (!pacc) return rc; state->pacc = pacc; pci_init(pacc); pci_scan_bus(pacc); for (p=pacc->devices; p; p=p->next) { add_pci_dev(state, p); } /* ordering here is important */ dmidecode_main(state); /* this will fail on Xen guests, that's OK */ sort_device_list(state); set_pci_vpd_instance(state); set_pci_slots(state); set_sriov_pf_vf(state); return rc; } int unparse_pci_name(char *buf, int size, const struct pci_dev *pdev) { return snprintf(buf, size, "%04x:%02x:%02x.%x", pci_domain_nr(pdev), pdev->bus, pdev->dev, pdev->func); } static int unparse_location(char *buf, const int size, const int location) { char *s = buf; if (location == 0) s += snprintf(s, size-(s-buf), "embedded"); else if (location == INT_MAX) s += snprintf(s, size-(s-buf), "unknown"); else if (location > 0) s += snprintf(s, size-(s-buf), "%u", location); else s += snprintf(s, size-(s-buf), "unknown"); return (s-buf); } static int unparse_smbios_type41_type(char *buf, const int size, const int type) { char *s = buf; const char *msg[] = {"Other", "Unknown", "Video", "SCSI Controller", "Ethernet", "Token Ring", "Sound", "PATA Controller", "SATA Controller", "SAS Controller", }; if (type > 0 && type <= sizeof(msg)) s += snprintf(s, size-(s-buf), "%s\n", msg[type-1]); else s += snprintf(s, size-(s-buf), "\n"); return (s-buf); } int unparse_pci_device(char *buf, const int size, const struct pci_device *p) { char *s = buf; struct pci_device *dev; char pci_name[16]; s += snprintf(s, size-(s-buf), "PCI name : "); s += unparse_pci_name(s, size-(s-buf), p->pci_dev); s += snprintf(s, size-(s-buf), "\n"); s += snprintf(s, size-(s-buf), "PCI Slot : "); if (p->physical_slot < INT_MAX) s += unparse_location(s, size-(s-buf), p->physical_slot); else s += snprintf(s, size-(s-buf), "Unknown"); s += snprintf(s, size-(s-buf), "\n"); if (p->smbios_type) { s += snprintf(s, size-(s-buf), "SMBIOS Device Type: "); s += unparse_smbios_type41_type(s, size-(s-buf), p->smbios_type); if (p->smbios_instance) s += snprintf(s, size-(s-buf), "SMBIOS Instance: %u\n", p->smbios_instance); } if (p->uses_smbios & HAS_SMBIOS_LABEL && p->smbios_label) s += snprintf(s, size-(s-buf), "SMBIOS Label: %s\n", p->smbios_label); if (p->uses_sysfs & HAS_SYSFS_INDEX) s += snprintf(s, size-(s-buf), "sysfs Index: %u\n", p->sysfs_index); if (p->uses_sysfs & HAS_SYSFS_LABEL) s += snprintf(s, size-(s-buf), "sysfs Label: %s\n", p->sysfs_label); if (p->physical_slot > 0 && !p->is_sriov_virtual_function) s += snprintf(s, size-(s-buf), "Index in slot: %u\n", p->index_in_slot); if (p->embedded_index_valid) s += snprintf(s, size-(s-buf), "Embedded Index: %u\n", p->embedded_index); if (p->vpd_port < INT_MAX) { s += snprintf(s, size-(s-buf), "VPD Port: %u\n", p->vpd_port); s += snprintf(s, size-(s-buf), "VPD Index: %u\n", p->vpd_pfi); if (p->vpd_pf) { s += snprintf(s, size-(s-buf), "VPD PCI master: "); s += unparse_pci_name(s, size-(s-buf), p->vpd_pf->pci_dev); s += snprintf(s, size-(s-buf), " count %d\n", p->vpd_pf->vpd_count); } } if (!list_empty(&p->vfs)) { s += snprintf(s, size-(s-buf), "Virtual Functions:\n"); list_for_each_entry(dev, &p->vfs, vfnode) { unparse_pci_name(pci_name, sizeof(pci_name), dev->pci_dev); s += snprintf(s, size-(s-buf), "%s\n", pci_name); } } return (s-buf); } struct pci_device * find_dev_by_pci(const struct libbiosdevname_state *state, const struct pci_dev *p) { struct pci_device *dev; list_for_each_entry(dev, &state->pci_devices, node) { if (is_same_pci(p, dev->pci_dev)) return dev; } return NULL; } struct pci_device * find_pci_dev_by_pci_addr(const struct libbiosdevname_state *state, const int domain, const int bus, const int device, const int func) { struct pci_device *dev; struct pci_dev p; memset(&p, 0, sizeof(p)); #ifdef HAVE_STRUCT_PCI_DEV_DOMAIN p.domain = domain; #endif p.bus = bus; p.dev = device; p.func = func; list_for_each_entry(dev, &state->pci_devices, node) { if (is_same_pci(&p, dev->pci_dev)) return dev; } return NULL; } struct pci_device * find_dev_by_pci_name(const struct libbiosdevname_state *state, const char *s) { int domain=0, bus=0, device=0, func=0; if (parse_pci_name(s, &domain, &bus, &device, &func)) return NULL; return find_pci_dev_by_pci_addr(state, domain, bus, device, func); } biosdevname-0.4.1/src/ethtool-copy.h0000644000000000000000000002765511766436556014327 00000000000000/* * ethtool.h: Defines for Linux ethtool. * * Copyright (C) 1998 David S. Miller (davem@redhat.com) * Copyright 2001 Jeff Garzik * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) * Portions Copyright 2002 Intel (eli.kupermann@intel.com, * christopher.leech@intel.com, * scott.feldman@intel.com) */ #ifndef _LINUX_ETHTOOL_H #define _LINUX_ETHTOOL_H /* This should work for both 32 and 64 bit userland. */ struct ethtool_cmd { u32 cmd; u32 supported; /* Features this interface supports */ u32 advertising; /* Features this interface advertises */ u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ u8 duplex; /* Duplex, half or full */ u8 port; /* Which connector port */ u8 phy_address; u8 transceiver; /* Which tranceiver to use */ u8 autoneg; /* Enable or disable autonegotiation */ u32 maxtxpkt; /* Tx pkts before generating tx int */ u32 maxrxpkt; /* Rx pkts before generating rx int */ u32 reserved[4]; }; #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ struct ethtool_drvinfo { u32 cmd; char driver[32]; /* driver short name, "tulip", "eepro100" */ char version[32]; /* driver version string */ char fw_version[32]; /* firmware version string, if applicable */ char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ /* For PCI devices, use pci_dev->slot_name. */ char reserved1[32]; char reserved2[16]; u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ u32 testinfo_len; u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ }; #define SOPASS_MAX 6 /* wake-on-lan settings */ struct ethtool_wolinfo { u32 cmd; u32 supported; u32 wolopts; u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ }; /* for passing single values */ struct ethtool_value { u32 cmd; u32 data; }; /* for passing big chunks of data */ struct ethtool_regs { u32 cmd; u32 version; /* driver-specific, indicates different chips/revs */ u32 len; /* bytes */ u8 data[0]; }; /* for passing EEPROM chunks */ struct ethtool_eeprom { u32 cmd; u32 magic; u32 offset; /* in bytes */ u32 len; /* in bytes */ u8 data[0]; }; /* for configuring coalescing parameters of chip */ struct ethtool_coalesce { u32 cmd; /* ETHTOOL_{G,S}COALESCE */ /* How many usecs to delay an RX interrupt after * a packet arrives. If 0, only rx_max_coalesced_frames * is used. */ u32 rx_coalesce_usecs; /* How many packets to delay an RX interrupt after * a packet arrives. If 0, only rx_coalesce_usecs is * used. It is illegal to set both usecs and max frames * to zero as this would cause RX interrupts to never be * generated. */ u32 rx_max_coalesced_frames; /* Same as above two parameters, except that these values * apply while an IRQ is being services by the host. Not * all cards support this feature and the values are ignored * in that case. */ u32 rx_coalesce_usecs_irq; u32 rx_max_coalesced_frames_irq; /* How many usecs to delay a TX interrupt after * a packet is sent. If 0, only tx_max_coalesced_frames * is used. */ u32 tx_coalesce_usecs; /* How many packets to delay a TX interrupt after * a packet is sent. If 0, only tx_coalesce_usecs is * used. It is illegal to set both usecs and max frames * to zero as this would cause TX interrupts to never be * generated. */ u32 tx_max_coalesced_frames; /* Same as above two parameters, except that these values * apply while an IRQ is being services by the host. Not * all cards support this feature and the values are ignored * in that case. */ u32 tx_coalesce_usecs_irq; u32 tx_max_coalesced_frames_irq; /* How many usecs to delay in-memory statistics * block updates. Some drivers do not have an in-memory * statistic block, and in such cases this value is ignored. * This value must not be zero. */ u32 stats_block_coalesce_usecs; /* Adaptive RX/TX coalescing is an algorithm implemented by * some drivers to improve latency under low packet rates and * improve throughput under high packet rates. Some drivers * only implement one of RX or TX adaptive coalescing. Anything * not implemented by the driver causes these values to be * silently ignored. */ u32 use_adaptive_rx_coalesce; u32 use_adaptive_tx_coalesce; /* When the packet rate (measured in packets per second) * is below pkt_rate_low, the {rx,tx}_*_low parameters are * used. */ u32 pkt_rate_low; u32 rx_coalesce_usecs_low; u32 rx_max_coalesced_frames_low; u32 tx_coalesce_usecs_low; u32 tx_max_coalesced_frames_low; /* When the packet rate is below pkt_rate_high but above * pkt_rate_low (both measured in packets per second) the * normal {rx,tx}_* coalescing parameters are used. */ /* When the packet rate is (measured in packets per second) * is above pkt_rate_high, the {rx,tx}_*_high parameters are * used. */ u32 pkt_rate_high; u32 rx_coalesce_usecs_high; u32 rx_max_coalesced_frames_high; u32 tx_coalesce_usecs_high; u32 tx_max_coalesced_frames_high; /* How often to do adaptive coalescing packet rate sampling, * measured in seconds. Must not be zero. */ u32 rate_sample_interval; }; /* for configuring RX/TX ring parameters */ struct ethtool_ringparam { u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ /* Read only attributes. These indicate the maximum number * of pending RX/TX ring entries the driver will allow the * user to set. */ u32 rx_max_pending; u32 rx_mini_max_pending; u32 rx_jumbo_max_pending; u32 tx_max_pending; /* Values changeable by the user. The valid values are * in the range 1 to the "*_max_pending" counterpart above. */ u32 rx_pending; u32 rx_mini_pending; u32 rx_jumbo_pending; u32 tx_pending; }; /* for configuring link flow control parameters */ struct ethtool_pauseparam { u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ /* If the link is being auto-negotiated (via ethtool_cmd.autoneg * being true) the user may set 'autonet' here non-zero to have the * pause parameters be auto-negotiated too. In such a case, the * {rx,tx}_pause values below determine what capabilities are * advertised. * * If 'autoneg' is zero or the link is not being auto-negotiated, * then {rx,tx}_pause force the driver to use/not-use pause * flow control. */ u32 autoneg; u32 rx_pause; u32 tx_pause; }; #define ETH_GSTRING_LEN 32 enum ethtool_stringset { ETH_SS_TEST = 0, ETH_SS_STATS, }; /* for passing string sets for data tagging */ struct ethtool_gstrings { u32 cmd; /* ETHTOOL_GSTRINGS */ u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ u32 len; /* number of strings in the string set */ u8 data[0]; }; enum ethtool_test_flags { ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */ }; /* for requesting NIC test and getting results*/ struct ethtool_test { u32 cmd; /* ETHTOOL_TEST */ u32 flags; /* ETH_TEST_FL_xxx */ u32 reserved; u32 len; /* result length, in number of u64 elements */ u64 data[0]; }; /* for dumping NIC-specific statistics */ struct ethtool_stats { u32 cmd; /* ETHTOOL_GSTATS */ u32 n_stats; /* number of u64's being returned */ u64 data[0]; }; struct ethtool_perm_addr { u32 cmd; /* ETHTOOL_GPERMADDR */ u32 size; u8 data[0]; }; /* CMDs currently supported */ #define ETHTOOL_GSET 0x00000001 /* Get settings. */ #define ETHTOOL_SSET 0x00000002 /* Set settings, privileged. */ #define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ #define ETHTOOL_GREGS 0x00000004 /* Get NIC registers, privileged. */ #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ #define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options, priv. */ #define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ #define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ #define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv. */ #define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */ #define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ #define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data, priv. */ #define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ #define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config, priv. */ #define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ #define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ #define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ #define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters, priv. */ #define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ #define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ #define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ #define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ #define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable * (ethtool_value) */ #define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable * (ethtool_value), priv. */ #define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ #define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ #define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ #define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ #define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ #define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ #define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET /* Indicates what features are supported by the interface. */ #define SUPPORTED_10baseT_Half (1 << 0) #define SUPPORTED_10baseT_Full (1 << 1) #define SUPPORTED_100baseT_Half (1 << 2) #define SUPPORTED_100baseT_Full (1 << 3) #define SUPPORTED_1000baseT_Half (1 << 4) #define SUPPORTED_1000baseT_Full (1 << 5) #define SUPPORTED_Autoneg (1 << 6) #define SUPPORTED_TP (1 << 7) #define SUPPORTED_AUI (1 << 8) #define SUPPORTED_MII (1 << 9) #define SUPPORTED_FIBRE (1 << 10) #define SUPPORTED_BNC (1 << 11) #define SUPPORTED_10000baseT_Full (1 << 12) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) #define ADVERTISED_10baseT_Full (1 << 1) #define ADVERTISED_100baseT_Half (1 << 2) #define ADVERTISED_100baseT_Full (1 << 3) #define ADVERTISED_1000baseT_Half (1 << 4) #define ADVERTISED_1000baseT_Full (1 << 5) #define ADVERTISED_Autoneg (1 << 6) #define ADVERTISED_TP (1 << 7) #define ADVERTISED_AUI (1 << 8) #define ADVERTISED_MII (1 << 9) #define ADVERTISED_FIBRE (1 << 10) #define ADVERTISED_BNC (1 << 11) #define ADVERTISED_10000baseT_Full (1 << 12) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the * devices settings, these indicate the current mode and whether * it was foced up into this mode or autonegotiated. */ /* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 #define SPEED_10000 10000 /* Duplex, half or full. */ #define DUPLEX_HALF 0x00 #define DUPLEX_FULL 0x01 /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 #define PORT_MII 0x02 #define PORT_FIBRE 0x03 #define PORT_BNC 0x04 /* Which tranceiver to use. */ #define XCVR_INTERNAL 0x00 #define XCVR_EXTERNAL 0x01 #define XCVR_DUMMY1 0x02 #define XCVR_DUMMY2 0x03 #define XCVR_DUMMY3 0x04 /* Enable or disable autonegotiation. If this is set to enable, * the forced link modes above are completely ignored. */ #define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 /* Wake-On-Lan options. */ #define WAKE_PHY (1 << 0) #define WAKE_UCAST (1 << 1) #define WAKE_MCAST (1 << 2) #define WAKE_BCAST (1 << 3) #define WAKE_ARP (1 << 4) #define WAKE_MAGIC (1 << 5) #define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ #endif /* _LINUX_ETHTOOL_H */ biosdevname-0.4.1/src/dmidecode/0000775000000000000000000000000011775366205013501 500000000000000biosdevname-0.4.1/src/dmidecode/types.h0000644000000000000000000000137711766436556014753 00000000000000#ifndef TYPES_H #define TYPES_H #include "config.h" typedef unsigned char u8; typedef unsigned short u16; typedef signed short i16; typedef unsigned int u32; #ifdef ALIGNMENT_WORKAROUND # ifdef BIGENDIAN # define WORD(x) (u16)((x)[1]+((x)[0]<<8)) # define DWORD(x) (u32)((x)[3]+((x)[2]<<8)+((x)[1]<<16)+((x)[0]<<24)) # define QWORD(x) (U64(DWORD(x+4), DWORD(x))) # else /* BIGENDIAN */ # define WORD(x) (u16)((x)[0]+((x)[1]<<8)) # define DWORD(x) (u32)((x)[0]+((x)[1]<<8)+((x)[2]<<16)+((x)[3]<<24)) # define QWORD(x) (U64(DWORD(x), DWORD(x+4))) # endif /* BIGENDIAN */ #else /* ALIGNMENT_WORKAROUND */ #define WORD(x) (u16)(*(const u16 *)(x)) #define DWORD(x) (u32)(*(const u32 *)(x)) #define QWORD(x) (*(const u64 *)(x)) #endif /* ALIGNMENT_WORKAROUND */ #endif biosdevname-0.4.1/src/dmidecode/dmidecode.h0000644000000000000000000000274111770171116015477 00000000000000/* * This file is part of the dmidecode project. * * (C) 2005-2007 Jean Delvare * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ struct dmi_header { u8 type; u8 length; u16 handle; u8 *data; }; const char *dmi_string(struct dmi_header *dm, u8 s); struct dmi_embedded_device { u8 type; u8 instance; u16 domain; u8 bus; u8 device; u8 function; const char *reference_designation; }; struct dmi_addon_device { u8 type; u8 instance; u16 domain; u8 bus; u8 device; u8 function; const char *reference_designation; }; enum dmi_onboard_device_type { DMI_OTHER=1, DMI_UNKNOWN, DMI_VIDEO, DMI_SCSI, DMI_ETHERNET, DMI_TOKEN_RING, DMI_SOUND, DMI_PATA, DMI_SATA, DMI_SAS, }; struct libbiosdevname_state; int dmidecode_main(const struct libbiosdevname_state *state); biosdevname-0.4.1/src/dmidecode/config.h0000644000000000000000000000065511766436556015052 00000000000000/* * Configuration */ #ifndef CONFIG_H #define CONFIG_H /* Default memory device file */ #ifdef __BEOS__ #define DEFAULT_MEM_DEV "/dev/misc/mem" #else #ifdef __sun #define DEFAULT_MEM_DEV "/dev/xsvc" #else #define DEFAULT_MEM_DEV "/dev/mem" #endif #endif /* Use mmap or not */ #ifndef __BEOS__ #define USE_MMAP #endif /* Use memory alignment workaround or not */ #ifdef __ia64__ #define ALIGNMENT_WORKAROUND #endif #endif biosdevname-0.4.1/src/dmidecode/util.h0000644000000000000000000000030511766436556014552 00000000000000#include #include "types.h" #define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0])) int checksum(const u8 *buf, size_t len); void *mem_chunk(size_t base, size_t len, const char *devmem); biosdevname-0.4.1/src/dmidecode/dmioem.c0000644000000000000000000000543611766436556015054 00000000000000/* * Decoding of OEM-specific entries * This file is part of the dmidecode project. * * (C) 2007 Jean Delvare * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include "types.h" #include "dmidecode.h" #include "dmioem.h" #include "../pci.h" /* * Globals for vendor-specific decodes */ enum DMI_VENDORS { VENDOR_UNKNOWN, VENDOR_HP }; static enum DMI_VENDORS dmi_vendor=VENDOR_UNKNOWN; /* * Remember the system vendor for later use. We only actually store the * value if we know how to decode at least one specific entry type for * that vendor. */ void dmi_set_vendor(const char *s) { if(strcmp(s, "HP")==0) dmi_vendor=VENDOR_HP; } /* * HP-specific data structures are decoded here. * * Code contributed by John Cagle. */ static int dmi_decode_hp(struct dmi_header *h, const struct libbiosdevname_state *state) { u8 *data=h->data; int nic, ptr; u8 smbios_type = 0; u8 bus, device, func; struct pci_device *pdev; switch(h->type) { case 209: case 221: /* * Vendor Specific: HP ProLiant NIC MAC Information * * This prints the BIOS NIC number, * PCI bus/device/function, and MAC address */ if (h->type == 221) smbios_type=0; else smbios_type=0x05; nic=1; ptr=4; while(h->length>=ptr+8) { bus = data[ptr+1]; device = data[ptr]>>3; func = data[ptr]&7; pdev = find_pci_dev_by_pci_addr(state, 0, bus, device, func); if (pdev) { if((data[ptr]==0x00 && data[ptr+1]==0x00) || (data[ptr]==0xFF && data[ptr+1]==0xFF)) pdev->smbios_enabled = 0; else { pdev->smbios_enabled = 1; pdev->smbios_type = smbios_type; pdev->smbios_instance = nic; pdev->physical_slot = 0; } } nic++; ptr+=8; } break; default: return 0; } return 1; } /* * Dispatch vendor-specific entries decoding * Return 1 if decoding was successful, 0 otherwise */ int dmi_decode_oem(struct dmi_header *h, const struct libbiosdevname_state *state) { switch(dmi_vendor) { case VENDOR_HP: return dmi_decode_hp(h, state); default: return 0; } } biosdevname-0.4.1/src/dmidecode/dmioem.h0000644000000000000000000000202111766436556015044 00000000000000/* * Decoding of OEM-specific entries * This file is part of the dmidecode project. * * (C) 2007 Jean Delvare * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "../state.h" struct dmi_header; void dmi_set_vendor(const char *s); int dmi_decode_oem(struct dmi_header *h, const struct libbiosdevname_state *state); biosdevname-0.4.1/src/dmidecode/dmidecode.c0000644000000000000000000002120411770171116015465 00000000000000/* * Trimmed from DMI Decode http://savannah.nongnu.org/projects/dmidecode * * (C) 2000-2002 Alan Cox * (C) 2002-2007 Jean Delvare * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * For the avoidance of doubt the "preferred form" of this code is one which * is in an open unpatent encumbered format. Where cryptographic key signing * forms part of the process of creating an executable the information * including keys needed to generate an equivalently functional executable * are deemed to be part of the source code. */ #include #include #include #include #include #include "config.h" #include "types.h" #include "util.h" #include "dmidecode.h" #include "dmioem.h" #include "../state.h" #include "../pci.h" #include "../naming_policy.h" extern int smver_mjr, smver_mnr, is_valid_smbios; static const char *bad_index = ""; /* * Type-independant Stuff */ const char *dmi_string(struct dmi_header *dm, u8 s) { char *bp=(char *)dm->data; size_t i, len; if(s==0) return "Not Specified"; bp+=dm->length; while(s>1 && *bp) { bp+=strlen(bp); bp++; s--; } if(!*bp) return bad_index; /* ASCII filtering */ len=strlen(bp); for(i=0; i=0; i--) { if (isspace(s[i-1])) s[i-1] = '\0'; else break; } } static void fill_one_slot_function(struct pci_device *pdev, struct dmi_header *h) { u8 *data = h->data; pdev->physical_slot = WORD(data+0x09); pdev->smbios_type = 0; pdev->smbios_instance = 0; pdev->uses_smbios |= HAS_SMBIOS_SLOT; if (dmi_string(h, data[0x04])) { pdev->smbios_label=strdup(dmi_string(h, data[0x04])); pdev->uses_smbios |= HAS_SMBIOS_LABEL; } strip_right(pdev->smbios_label); } static void fill_all_slot_functions(const struct libbiosdevname_state *state, int domain, int bus, int device, struct dmi_header *h) { struct pci_device *pdev; list_for_each_entry(pdev, &state->pci_devices, node) { if (pdev->pci_dev->domain == domain && pdev->pci_dev->bus == bus && pdev->pci_dev->dev == device && ! (pdev->uses_smbios & HAS_SMBIOS_EXACT_MATCH)) fill_one_slot_function(pdev, h); } } static void dmi_decode(struct dmi_header *h, u16 ver, const struct libbiosdevname_state *state) { u8 *data=h->data; int domain, bus, device, function; struct pci_device *pdev; switch(h->type) { case 9: /* 3.3.10 System Slots */ if (h->length >= 0x0E && h->length >=0x11) { domain = WORD(data+0x0D); bus = data[0x0F]; device = (data[0x10]>>3)&0x1F; function = data[0x10] & 7; if (! (domain == 0xFFFF && bus == 0xFF && data[0x10] == 0xFF)) { device = (data[0x10]>>3)&0x1F; function = data[0x10] & 7; pdev = find_pci_dev_by_pci_addr(state, domain, bus, device, function); if (pdev) { fill_one_slot_function(pdev, h); pdev->uses_smbios |= HAS_SMBIOS_EXACT_MATCH; } fill_all_slot_functions(state, domain, bus, device, h); } } break; case 41: /* 3.3.xx Onboard Device Information */ domain = WORD(data+0x07); bus = data[0x09]; device = (data[0xa]>>3) & 0x1F; function = data[0xa] & 0x7; pdev = find_pci_dev_by_pci_addr(state, domain, bus, device, function); if (pdev) { pdev->physical_slot = 0; pdev->smbios_enabled = !!(data[0x05] & 0x80); pdev->smbios_type = data[0x05] & 0x7F; pdev->smbios_instance = data[0x06]; pdev->uses_smbios |= HAS_SMBIOS_INSTANCE | HAS_SMBIOS_SLOT; if (dmi_string(h, data[0x04])) { pdev->smbios_label=strdup(dmi_string(h, data[0x04])); pdev->uses_smbios |= HAS_SMBIOS_LABEL; } strip_right(pdev->smbios_label); } break; default: if(dmi_decode_oem(h, state)) break; } } static void to_dmi_header(struct dmi_header *h, u8 *data) { h->type=data[0]; h->length=data[1]; h->handle=WORD(data+2); h->data=data; } static int isvalidsmbios(int mjr, int mnr) { if (!smver_mjr && !smver_mnr) { is_valid_smbios = 1; return 1; } if (mjr > smver_mjr) { is_valid_smbios = 1; return 1; } if ((mjr == smver_mjr) && (mnr >= smver_mnr)) { is_valid_smbios = 1; return 1; } return 0; } static void dmi_table(u32 base, u16 len, u16 num, u16 ver, const char *devmem, const struct libbiosdevname_state *state) { u8 *buf; u8 *data; int i=0; /* Verify SMBIOS version */ if (!isvalidsmbios(ver >> 8, ver & 0xFF)) { return; } if((buf=mem_chunk(base, len, devmem))==NULL) { #ifndef USE_MMAP printf("Table is unreachable, sorry. Try compiling dmidecode with -DUSE_MMAP.\n"); #endif return; } data=buf; while(i=5) dmi_set_vendor(dmi_string(&h, data[0x04])); /* look for the next handle */ next=data+h.length; while(next-buf+1 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * For the avoidance of doubt the "preferred form" of this code is one which * is in an open unpatent encumbered format. Where cryptographic key signing * forms part of the process of creating an executable the information * including keys needed to generate an equivalently functional executable * are deemed to be part of the source code. */ #include #include #include "config.h" #ifdef USE_MMAP #include #ifndef MAP_FAILED #define MAP_FAILED ((void *) -1) #endif /* !MAP_FAILED */ #endif /* USE MMAP */ #include #include #include #include #include #include #include "types.h" #include "util.h" #ifndef USE_MMAP static int myread(int fd, u8 *buf, size_t count, const char *prefix) { ssize_t r=1; size_t r2=0; while(r2!=count && r!=0) { r=read(fd, buf+r2, count-r2); if(r==-1) { if(errno!=EINTR) { close(fd); perror(prefix); return -1; } } else r2+=r; } if(r2!=count) { close(fd); fprintf(stderr, "%s: Unexpected end of file\n", prefix); return -1; } return 0; } #endif int checksum(const u8 *buf, size_t len) { u8 sum=0; size_t a; for(a=0; a * Licensed under the GNU General Public license, version 2. */ #ifndef NAMING_POLICY_H_INCLUDED #define NAMING_POLICY_H_INCLUDED #include "state.h" extern int assign_bios_network_names(const struct libbiosdevname_state *state, int namingpolicy, const char *prefix); #endif /* NAMING_POLICY_H_INCLUDED */ biosdevname-0.4.1/biosdevname.spec.fedora.in0000644000000000000000000001274511766436666015751 00000000000000Name: biosdevname Version: @PACKAGE_VERSION@ Release: 1%{?dist} Summary: Udev helper for naming devices per BIOS names Group: System Environment/Base License: GPLv2 URL: http://linux.dell.com/files/%{name} # SMBIOS only exists on these arches. It's also likely that other # arches don't expect the PCI bus to be sorted breadth-first, or of # so, there haven't been any comments about that on LKML. ExclusiveArch: %{ix86} x86_64 Source0: http://linux.dell.com/files/%{name}/permalink/%{name}-%{version}.tar.gz BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) BuildRequires: pciutils-devel, zlib-devel # to figure out how to name the rules file BuildRequires: udev #To generate the configure script BuildRequires: autoconf BuildRequires: automake # for ownership of /etc/udev/rules.d Requires: udev %description biosdevname in its simplest form takes a kernel device name as an argument, and returns the BIOS-given name it "should" be. This is necessary on systems where the BIOS name for a given device (e.g. the label on the chassis is "Gb1") doesn't map directly and obviously to the kernel name (e.g. eth0). %prep %setup -q %build #If configure script doesn't exist generate it with autogen script [ -e ./configure ] || ./autogen.sh --no-configure # this is a udev rule, so it needs to live in / rather than /usr %configure --disable-rpath --prefix=/ --sbindir=/sbin make %{?_smp_mflags} %install rm -rf %{buildroot} make install install-data DESTDIR=%{buildroot} %clean rm -rf %{buildroot} %files %defattr(-,root,root,-) %doc COPYING README /sbin/%{name} # hack for either /etc or /lib rules location /*/udev/rules.d/*.rules %{_mandir}/man1/%{name}.1* %changelog * Tue Oct 4 2011 Praveen K Paladugu - 0.3.11-1 - Fix man page for PCI slot naming - Fix clearing of buffer for NPAR/SRIOV naming - Add --nopirq and --smbios options to manpage. - Verify length of VPD on network device - Close file handle on sysfs read - Fix naming policy for NPAR devices. Match each PCI device to its VPD 'physical' device to get correct index - Exclude building on ia64 arch - Add support functions for determining PCIE slot - Scan full path to parent when getting PCIE slot - Fix NPAR naming for add-in cards - Don't display _vf suffix on NPAR devices with single function - Fix PCIe/PIRQ slot mapping * Thu Feb 17 2011 Matt Domsch - 0.3.7-1 - drop dump_pirq, suggest use biosdecode instead - don't use '#' in names, use 'p' instead, by popular demand - properly look for SMBIOS, then $PIR, then recurse - Add kernel command line parameter "biosdevname={0|1}" to turn off/on biosdevname - Fix segfault when BIOS advertises zero sized PIRQ Routing Table - Add 'bonding' and 'openvswitch' to the virtual devices list - fail PIRQ lookups if device domain is not 0 - Don't suggest names if running in a virtual machine (Xen, KVM, VMware tested, but should work on others) - Typo fixes * Tue Jan 25 2011 Matt Domsch - 0.3.6-1 - drop biosdevnameS, it's unused and fails to build on F15 * Tue Jan 25 2011 Matt Domsch - 0.3.5-1 - install dump_pirq into /usr/sbin - fix udev rule, skip running if NAME is already set - move udev rule to /lib/udev/rules.d by default * Thu Dec 16 2010 Matt Domsch - 0.3.4-1 - drop unnecessary explicit version requirement on udev - bugfix: start indices at 1 not 0, to match Dell and HP server port designations - bugfix: don't assign names to unknown devices - bugfix: don't assign duplicate names * Thu Dec 9 2010 Matt Domsch - 0.3.3-1 - add back in use of PCI IRQ Routing Table, if info is not provided by sysfs or SMBIOS * Thu Dec 2 2010 Matt Domsch - 0.3.2-1 - fix for multi-port cards with bridges - removal of code for seriously obsolete systems * Mon Nov 28 2010 Matt Domsch 0.3.1-1 - remove all policies except 'physical' and 'all_ethN' - handle SR-IOV devices properly * Wed Nov 10 2010 Matt Domsch 0.3.0-1 - add --policy=loms, make it default - read index and labels from sysfs if available * Mon Jul 27 2009 Jordan Hargrave 0.2.5-1 - fix mmap error checking * Fri Jul 24 2009 Fedora Release Engineering - 0.2.4-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Mon Feb 23 2009 Fedora Release Engineering - 0.2.4-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Tue May 06 2008 Matt Domsch 0.2.4-5 - use policy=all_names to find breakage * Sun Feb 10 2008 Matt Domsch 0.2.4-4 - rebuild for gcc43 * Fri Sep 21 2007 Matt Domsch 0.2.4-3 - fix manpage entry in files * Fri Sep 21 2007 Matt Domsch 0.2.4-2 - rebuild with Requires: udev > 115-3.20070920git * Fri Sep 21 2007 Matt Domsch 0.2.4-1 - coordinate udev rules usage with udev maintainer - fix crashes in pcmcia search, in_ethernet(), and incorrect command line parsing. * Mon Aug 27 2007 Matt Domsch 0.2.3-1 - eliminate libbiosdevname.*, pre and post scripts * Fri Aug 24 2007 Matt Domsch 0.2.2-1 - ExclusiveArch those arches with SMBIOS and PCI IRQ Routing tables - eliminate libsysfs dependency, move app to / for use before /usr is mounted. - build static * Mon Aug 20 2007 Matt Domsch 0.2.1-1 - initial release biosdevname-0.4.1/depcomp0000755000000000000000000003710011775366145012274 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2005-07-09.11 # Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test -f "$tmpdepfile"; then : else stripped=`echo "$stripped" | sed 's,^.*/,,'` tmpdepfile="$stripped.u" fi if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mecanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: biosdevname-0.4.1/AUTHORS0000644000000000000000000000046411766436556011776 00000000000000Matt Domsch All files not otherwise noted list.h: Cribbed from the Linux kernel 2.6.18. read_proc.c: Cribbed from net-tools-1.60 ethtool-copy.h: Cribbed from ethtool dmidecode/* Cribbed from dmidecode 2.9 Michael Brown autoconf/automake cleanups biosdevname-0.4.1/biosdevname.spec.suse.in0000644000000000000000000000767711766436556015476 00000000000000Name: biosdevname Version: @PACKAGE_VERSION@ Release: 1%{?dist} Summary: Udev helper for naming devices per BIOS names Group: System Environment/Base License: GPLv2 URL: http://linux.dell.com/files/%{name} # SMBIOS only exists on these arches. It's also likely that other # arches don't expect the PCI bus to be sorted breadth-first, or of # so, there haven't been any comments about that on LKML. ExclusiveArch: %{ix86} x86_64 Source0: http://linux.dell.com/files/%{name}/permalink/%{name}-%{version}.tar.gz BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) BuildRequires: pciutils-devel, zlib-devel # to figure out how to name the rules file BuildRequires: udev # for ownership of /etc/udev/rules.d Requires: udev %description biosdevname in its simplest form takes a kernel device name as an argument, and returns the BIOS-given name it "should" be. This is necessary on systems where the BIOS name for a given device (e.g. the label on the chassis is "Gb1") doesn't map directly and obviously to the kernel name (e.g. eth0). %prep %setup -q %build # this is a udev rule, so it needs to live in / rather than /usr %configure --disable-rpath --prefix=/ --sbindir=/sbin make %{?_smp_mflags} %install rm -rf %{buildroot} make install DESTDIR=%{buildroot} %clean rm -rf %{buildroot} %files %defattr(-,root,root,-) %doc COPYING README /sbin/%{name} # hack for either /etc or /lib rules location /*/udev/rules.d/*.rules %{_mandir}/man1/%{name}.1* %changelog * Thu Feb 17 2011 Matt Domsch - 0.3.7-1 - drop dump_pirq, suggest use biosdecode instead - don't use '#' in names, use 'p' instead, by popular demand - properly look for SMBIOS, then $PIR, then recurse - Add kernel command line parameter "biosdevname={0|1}" to turn off/on biosdevname - Fix segfault when BIOS advertises zero sized PIRQ Routing Table - Add 'bonding' and 'openvswitch' to the virtual devices list - fail PIRQ lookups if device domain is not 0 - Don't suggest names if running in a virtual machine (Xen, KVM, VMware tested, but should work on others) - Typo fixes * Tue Jan 25 2011 Matt Domsch - 0.3.6-1 - drop biosdevnameS, it's unused and fails to build on F15 * Tue Jan 25 2011 Matt Domsch - 0.3.5-1 - install dump_pirq into /usr/sbin - fix udev rule, skip running if NAME is already set - move udev rule to /lib/udev/rules.d by default * Thu Dec 16 2010 Matt Domsch - 0.3.4-1 - drop unnecessary explicit version requirement on udev - bugfix: start indices at 1 not 0, to match Dell and HP server port designations - bugfix: don't assign names to unknown devices - bugfix: don't assign duplicate names * Thu Dec 9 2010 Matt Domsch - 0.3.3-1 - add back in use of PCI IRQ Routing Table, if info is not provided by sysfs or SMBIOS * Thu Dec 2 2010 Matt Domsch - 0.3.2-1 - fix for multi-port cards with bridges - removal of code for seriously obsolete systems * Mon Nov 28 2010 Matt Domsch 0.3.1-1 - remove all policies except 'physical' and 'all_ethN' - handle SR-IOV devices properly * Wed Nov 10 2010 Matt Domsch 0.3.0-1 - add --policy=loms, make it default - read index and labels from sysfs if available * Mon Jul 27 2009 Jordan Hargrave 0.2.5-1 - fix mmap error checking * Fri Sep 21 2007 Matt Domsch 0.2.4-1 - coordinate udev rules usage with udev maintainer - fix crashes in pcmcia search, in_ethernet(), and incorrect command line parsing. * Mon Aug 27 2007 Matt Domsch 0.2.3-1 - eliminate libbiosdevname.*, pre and post scripts * Fri Aug 24 2007 Matt Domsch 0.2.2-1 - ExclusiveArch those arches with SMBIOS and PCI IRQ Routing tables - eliminate libsysfs dependency, move app to / for use before /usr is mounted. - build static * Mon Aug 20 2007 Matt Domsch 0.2.1-1 - initial release biosdevname-0.4.1/missing0000755000000000000000000002540611775366145012324 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2005-06-08.21 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). case "$1" in lex|yacc) # Not GNU programs, they don't have --version. ;; tar) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: biosdevname-0.4.1/TODO0000644000000000000000000000007211766436556011411 00000000000000* fix Ubuntu builds to not require -lz, when Fedora does. biosdevname-0.4.1/biosdevname.10000644000000000000000000000667311766436666013316 00000000000000.\" Hey, EMACS: -*- nroff -*- .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .TH BIOSDEVNAME 1 "Nov 28, 2010" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME biosdevname \- give BIOS-given name of a device .SH SYNOPSIS .B biosdevname .RI [options]\ [args]... .SH DESCRIPTION biosdevname takes a kernel device name as an argument, and returns the BIOS-given name it "should" be. .SH OPTIONS .TP .B \-i, \-\-interface Treat [args] as ethernet devs .TP .B \-d, \-\-debug Enable debugging .TP .B \-\-policy \fI[physical|all_ethN] .TP .B \-\-prefix \fI[string] string use for embedded NICs in the physical policy (default=em) .TP .B \-\-nopirq Do not use $PIR table for mapping PCI device to slot. Some BIOS have incorrect values. .TP .B \-\-smbios \fI[x.y] Require minimum SMBIOS version x.y .SH POLICIES .br The .B physical policy is the current default. However, when invoking biosdevname in udev rules, one should always specify the policy you want, as the default has changed over time. .br The .B physical policy uses the following scheme: .TP em[_] for embedded NICs .TP pp[_] for cards in PCI slots .br .TP The .B all_ethN policy makes a best guess at what the device order should be, with embedded devices first, PCI cards in ascending slot order, and ports in ascending PCI bus/device/function order breadth-first. However, this policy .I does not work if your PCI devices are hot-plugged or hot-pluggable, including the virtual functions on an SR-IOV device. In a hot-plug scenario, each separate udev instance will be invoked in parallel, while the device tree is still being populated with new devices. Each udev instance will see a different PCI tree, and thus cannot provide consistent enumeration. Use of this policy should be limited to only scenarios where all PCI devices are present at boot (cold-plug). .SH EXIT CODES Returns 0 on success, with BIOS-suggested name printed to stdout. .br Returns 1 on provided device name lookup failure. .br Returns 2 if system BIOS does not provide naming information. biosdevname requires system BIOS to provide naming information, either via SMBIOS or sysfs files. .br Returns 3 if not run as root but requires root privileges. .br Returns 4 if running in a virtual machine. .SH SEE ALSO .br http://linux.dell.com/wiki/index.php/Oss/libnetdevname .br http://linux.dell.com/files/biosdevname/ .br git://linux.dell.com/biosdevname.git .SH RELATED PROGRAMS .br The .B dmidecode package contains two tools useful for debugging BIOS features that biosdevname uses, specifically .B dmidecode to read the SMBIOS Type 9 and Type 41 tables, and .B biosdecode to read the PCI IRQ Routing Table. Please include the output of each of these programs in any bug reports. .SH AUTHOR biosdevname was written by Matt Domsch .PP This manual page was written by Rudy Gevaert , for the Debian project (but may be used by others). biosdevname-0.4.1/ChangeLog0000644000000000000000000000206311775366002012461 00000000000000* Mon Jul 1 2012 - Use addslot() to track both embedded and physical index per slot - Add fixes to ignore NPAR parsing on some cards * Mon Jul 27 2009 - add SMBIOS naming policy - fix return error check for mmap * Wed Nov 28 2006 - fix usage() being printed on success - don't assign BIOS device names to Linux virtual devices (tun0) (thanks to Bill Nottingham for finding both of these) * Wed Nov 28 2006 - Release 0.1 * Thu Aug 30 2007 - drop libbiosdevname - autoconf/automake magic by Michael Brown - rpm spec cleanups per Fedora review * Fri Aug 24 2007 - add spec files for Fedora and OpenSUSE - ExclusiveArch those arches with SMBIOS and PCI IRQ Routing tables - eliminate libsysfs dependency, move app to / for use before /usr is mounted. * Fri Jul 27 2007 - add SMBIOS Type 9 and 41 extensions, and HP OEM-specific extension parsing - Release 0.2 * Wed Nov 28 2006 - fix usage() being printed on success - don't assign BIOS device names to Linux virtual devices (tun0) (thanks to Bill Nottingham for finding both of these) * Wed Nov 28 2006 - Release 0.1 biosdevname-0.4.1/aclocal.m40000644000000000000000000010056611775366142012563 00000000000000# generated automatically by aclocal 1.9.6 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.6])]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 7 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 3 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 12 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Copyright (C) 1999, 2000, 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_PROG_CC_C_O # -------------- # Like AC_PROG_CC_C_O, but changed for automake. AC_DEFUN([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC_C_O])dnl AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl # FIXME: we rely on the cache variable name because # there is no other way. set dummy $CC ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. # # We cannot accept any implementation of `mkdir' that recognizes `-p'. # Some implementations (such as Solaris 8's) are not thread-safe: if a # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' # concurrently, both version can detect that a/ is missing, but only # one can create it and the other will error out. Consequently we # restrict ourselves to GNU make (using the --version option ensures # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR biosdevname-0.4.1/pkg/0000755000000000000000000000000011636172703011546 500000000000000biosdevname-0.4.1/pkg/debian/0000755000000000000000000000000011636172703012770 500000000000000biosdevname-0.4.1/pkg/debian/rules0000755000000000000000000000452011636172703013771 00000000000000#!/usr/bin/make -f # -*- makefile -*- # Sample debian/rules that uses debhelper. # This file was originally written by Joey Hess and Craig Small. # As a special exception, when this file is copied by dh-make into a # dh-make output file, you may use that output file without restriction. # This special exception was added by Craig Small in version 0.37 of dh-make. # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 # These are used for cross-compiling and for saving the configure script # from having to guess our platform (since we know it already) DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) CFLAGS = -Wall -g ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) CFLAGS += -O0 else CFLAGS += -O2 endif configure: configure.ac autoreconf -i config.status: configure dh_testdir # Add here commands to configure the package. ./configure --disable-rpath --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/ --sbindir=/sbin --mandir=/usr/share/man CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs" build: build-stamp build-stamp: config.status dh_testdir # Add here commands to compile the package. $(MAKE) #docbook-to-man debian/biosdevname.sgml > biosdevname.1 touch $@ clean: dh_testdir dh_testroot rm -f build-stamp # Add here commands to clean up after the build process. -$(MAKE) distclean ifneq "$(wildcard /usr/share/misc/config.sub)" "" cp -f /usr/share/misc/config.sub config.sub endif ifneq "$(wildcard /usr/share/misc/config.guess)" "" cp -f /usr/share/misc/config.guess config.guess endif dh_clean install: build dh_testdir dh_testroot dh_clean -k dh_installdirs # Add here commands to install the package into debian/biosdevname. $(MAKE) install DESTDIR=$(CURDIR)/debian/biosdevname # Build architecture-independent files here. binary-indep: build install # We have nothing to do by default. # Build architecture-dependent files here. binary-arch: build install dh_testdir dh_testroot dh_installchangelogs ChangeLog dh_installdocs dh_installexamples dh_install dh_installman dh_link dh_strip dh_compress dh_fixperms dh_makeshlibs dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb binary: binary-indep binary-arch .PHONY: build clean binary-indep binary-arch binary install biosdevname-0.4.1/pkg/debian/copyright0000644000000000000000000000120611636172703014642 00000000000000This package was debianized by Rudy Gevaert on Wed, 16 May 2007 09:25:13 +0200. It was downloaded from http://linux.dell.com/biosdevname/ Upstream Author: Matt Domsch Copyright: 2006 Dell, Inc You are free to distribute this software under the terms of the GNU General Public License either version 2 of the License. On Debian systems, the complete text of the GNU General Public License can be found in the file `/usr/share/common-licenses/GPL-2'. The Debian packaging is (C) 2007, Rudy Gevaert and is licensed under the GPL, see `/usr/share/common-licenses/GPL'. biosdevname-0.4.1/pkg/debian/docs0000644000000000000000000000001411636172703013556 00000000000000README TODO biosdevname-0.4.1/pkg/debian/compat0000644000000000000000000000000211636172703014106 000000000000005 biosdevname-0.4.1/pkg/debian/README.debian0000644000000000000000000000013711636172703015012 00000000000000When necessary remove /etc/udev/rules.d/z25_persistent-net.rules after installing the package. biosdevname-0.4.1/pkg/debian/changelog0000644000000000000000000000553311636172703014570 00000000000000biosdevname (0.3.7) unstable; urgency=low * drop dump_pirq, suggest use biosdecode instead * don't use '#' in names, use 'p' instead, by popular demand * properly look for SMBIOS, then $PIR, then recurse * Add kernel command line parameter "biosdevname={0|1}" to turn off/on biosdevname * Fix segfault when BIOS advertises zero sized PIRQ Routing Table * Add 'bonding' and 'openvswitch' to the virtual devices list * Typo fixes * fail PIRQ lookups if device domain is not 0 * Don't suggest names if running in a virtual machine (Xen, KVM, VMware tested, but should work on others) -- Matt Domsch Thu, 17 Feb 2011 09:48:00 -0600 biosdevname (0.3.6) unstable; urgency=low * drop biosdevnameS, it's unused and fails to build on F15 -- Matt Domsch Tue, 25 Jan 2011 14:48:00 -0600 biosdevname (0.3.5) unstable; urgency=low * install dump_pirq into /usr/sbin * fix udev rule, skip running if NAME is already set * move udev rule to /lib/udev/rules.d -- Matt Domsch Tue, 25 Jan 2011 12:17:00 -0600 biosdevname (0.3.4) unstable; urgency=low * drop unnecessary explicit version requirement on udev * bugfix: start indices at 1 not 0, to match Dell and HP server port designations * bugfix: don't assign names to unknown devices * bugfix: don't assign duplicate names -- Matt Domsch Thu, 16 Dec 2010 10:45:00 -0600 biosdevname (0.3.3) unstable; urgency=low * add back in use of PCI IRQ Routing Table, if info is not provided by sysfs or SMBIOS -- Matt Domsch Thu, 09 Nov 2010 15:31:00 -0600 * fix for multi-port cards with bridges * removal of code for seriously obsolete systems -- Matt Domsch Thu, 02 Dec 2010 22:03:00 -0600 biosdevname (0.3.1) unstable; urgency=low * remove all policies except 'physical' and 'all_ethN' * handle SR-IOV devices properly -- Matt Domsch Mon, 28 Nov 2010 22:05:00 -0600 biosdevname (0.3.0) unstable; urgency=low * add --policy=loms, use it by default. * read index and labels from sysfs if available -- Matt Domsch Wed, 10 Nov 2010 22:44:23 -0600 biosdevname (0.2.4-1) unstable; urgency=low * eliminate libsysfs usage, libbiosdevname * coordinate udev rules usage with udev maintainer * fix crashes in pcmcia search, in_ethernet(), and incorrect command line parsing. -- Matt Domsch Sat, 21 Sep 2007 10:30:13 -0500 biosdevname (0.2.3-1) unstable; urgency=low * Initial working release -- Matt Domsch Sat, 08 Sep 2007 14:30:13 -0500 biosdevname (0.1-1) unstable; urgency=low * Initial release. * bios_dev_name-0.1-usage-and-virtual-device-fix.patch is applied -- Rudy Gevaert Wed, 16 May 2007 09:25:13 +0200 biosdevname-0.4.1/pkg/debian/control0000644000000000000000000000133111636172703014311 00000000000000Source: biosdevname Section: misc Priority: optional Maintainer: Rudy Gevaert Build-Depends: debhelper (>= 5), autotools-dev, pciutils-dev, pciutils, udev Standards-Version: 3.7.2 Package: biosdevname Architecture: i386 amd64 ia64 Depends: ${shlibs:Depends}, udev Description: biosdevname in its simplest form takes a kernel device name as an argument, and returns the BIOS-given name it "should" be. . This is necessary on systems where the BIOS name for a given device (e.g. the label on the chassis is "Gb1") doesn't map directly and obviously to the kernel name (e.g. eth0). . This also works as a straight udev rule, which is provided. . Home Page: http://linux.dell.com/biosdevname/ biosdevname-0.4.1/pkg/debian/dirs0000644000000000000000000000006111636172703013571 00000000000000sbin lib/udev etc/udev usr/share/doc/biosdevname biosdevname-0.4.1/NEWS0000644000000000000000000000000011766436556011407 00000000000000biosdevname-0.4.1/configure0000755000000000000000000122377511775366144012645 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.63 for biosdevname 0.4.1. # # Report bugs to . # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH if test "x$CONFIG_SHELL" = x; then if (eval ":") 2>/dev/null; then as_have_required=yes else as_have_required=no fi if test $as_have_required = yes && (eval ": (as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=\$LINENO as_lineno_2=\$LINENO test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ") 2> /dev/null; then : else as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. case $as_dir in /*) for as_base in sh bash ksh sh5; do as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac done IFS=$as_save_IFS for as_shell in $as_candidate_shells $SHELL; do # Try only shells that exist, to save several forks. if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { ("$as_shell") 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : _ASEOF }; then CONFIG_SHELL=$as_shell as_have_required=yes if { "$as_shell" 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : (as_func_return () { (exit $1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = "$1" ); then : else exitcode=1 echo positional parameters were not saved. fi test $exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } _ASEOF }; then break fi fi done if test "x$CONFIG_SHELL" != x; then for as_var in BASH_ENV ENV do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test $as_have_required = no; then echo This script requires a shell more modern than all the echo shells that I found on your system. Please install a echo modern shell, or manually run the script under such a echo shell if you do have one. { (exit 1); exit 1; } fi fi fi (eval "as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0") || { echo No shell found that supports shell functions. echo Please tell bug-autoconf@gnu.org about your system, echo including any error possibly output before this message. echo This can help us improve future autoconf versions. echo Configuration will now proceed without shell functions. } as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='biosdevname' PACKAGE_TARNAME='biosdevname' PACKAGE_VERSION='0.4.1' PACKAGE_STRING='biosdevname 0.4.1' PACKAGE_BUGREPORT='Jordan_Hargrave@dell.com' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_unique_file="src/read_proc.c" ac_default_prefix= ac_subst_vars='LTLIBOBJS RULEDIR RULEDEST LIBOBJS ALLOCA READELF RANLIB am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE ac_ct_CXX CXXFLAGS CXX LN_S MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM EGREP GREP CPP OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_dependency_tracking enable_maintainer_mode ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP CXX CXXFLAGS CCC' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { $as_echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { $as_echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 { (exit 1); exit 1; }; } ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { $as_echo "$as_me: error: working directory cannot be determined" >&2 { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 { (exit 1); exit 1; }; } # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures biosdevname 0.4.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/biosdevname] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of biosdevname 0.4.1:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF biosdevname configure 0.4.1 generated by GNU Autoconf 2.63 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by biosdevname $as_me 0.4.1, which was generated by GNU Autoconf 2.63. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test -r "$ac_site_file"; then { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 $as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 $as_echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { $as_echo "$as_me:$LINENO: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } if test -z "$ac_file"; then $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 $as_echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi fi fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } { $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } { $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi rm -f conftest$ac_cv_exeext { $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:$LINENO: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:$LINENO: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:$LINENO: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 $as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:$LINENO: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done if test "${ac_cv_header_minix_config_h+set}" = set; then { $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5 $as_echo_n "checking for minix/config.h... " >&6; } if test "${ac_cv_header_minix_config_h+set}" = set; then $as_echo_n "(cached) " >&6 fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 $as_echo "$ac_cv_header_minix_config_h" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking minix/config.h usability" >&5 $as_echo_n "checking minix/config.h usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking minix/config.h presence" >&5 $as_echo_n "checking minix/config.h presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: minix/config.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: minix/config.h: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: minix/config.h: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5 $as_echo_n "checking for minix/config.h... " >&6; } if test "${ac_cv_header_minix_config_h+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_header_minix_config_h=$ac_header_preproc fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 $as_echo "$ac_cv_header_minix_config_h" >&6; } fi if test "x$ac_cv_header_minix_config_h" = x""yes; then MINIX=yes else MINIX= fi if test "$MINIX" = yes; then cat >>confdefs.h <<\_ACEOF #define _POSIX_SOURCE 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define _POSIX_1_SOURCE 2 _ACEOF cat >>confdefs.h <<\_ACEOF #define _MINIX 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5 $as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } if test "${ac_cv_safe_to_define___extensions__+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ # define __EXTENSIONS__ 1 $ac_includes_default int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_safe_to_define___extensions__=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_safe_to_define___extensions__=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5 $as_echo "$ac_cv_safe_to_define___extensions__" >&6; } test $ac_cv_safe_to_define___extensions__ = yes && cat >>confdefs.h <<\_ACEOF #define __EXTENSIONS__ 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define _ALL_SOURCE 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define _GNU_SOURCE 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define _POSIX_PTHREAD_SEMANTICS 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define _TANDEM_SOURCE 1 _ACEOF ac_config_headers="$ac_config_headers config.h" am__api_version="1.9" ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 $as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 $as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 $as_echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi { $as_echo "$as_me:$LINENO: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 $as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='biosdevname' VERSION='0.4.1' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' depcc="$CC" am_compiler_list= { $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE # Checks for programs. for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 $as_echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:$LINENO: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:$LINENO: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test "x$CC" != xcc; then { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 $as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } else { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 $as_echo_n "checking whether cc understands -c and -o together... " >&6; } fi set dummy $CC; ac_cc=`$as_echo "$2" | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # We do the test twice because some compilers refuse to overwrite an # existing .o file with -o, though they will create one. ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* if { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -f conftest2.$ac_objext && { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then eval ac_cv_prog_cc_${ac_cc}_c_o=yes if test "x$CC" != xcc; then # Test first that cc exists at all. if { ac_try='cc -c conftest.$ac_ext >&5' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* if { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -f conftest2.$ac_objext && { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # cc works too. : else # cc exists but doesn't like -o. eval ac_cv_prog_cc_${ac_cc}_c_o=no fi fi fi else eval ac_cv_prog_cc_${ac_cc}_c_o=no fi rm -f core conftest* fi if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } cat >>confdefs.h <<\_ACEOF #define NO_MINUS_C_MINUS_O 1 _ACEOF fi # FIXME: we rely on the cache variable name because # there is no other way. set dummy $CC ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi { $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:$LINENO: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CXXFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CXX" am_compiler_list= { $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi for ac_prog in readelf do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_READELF+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$READELF"; then ac_cv_prog_READELF="$READELF" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_READELF="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi READELF=$ac_cv_prog_READELF if test -n "$READELF"; then { $as_echo "$as_me:$LINENO: result: $READELF" >&5 $as_echo "$READELF" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$READELF" && break done for ac_func in realpath do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done # Checks for libraries. { $as_echo "$as_me:$LINENO: checking for snprintf in -lc" >&5 $as_echo_n "checking for snprintf in -lc... " >&6; } if test "${ac_cv_lib_c_snprintf+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lc $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char snprintf (); int main () { return snprintf (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_c_snprintf=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_c_snprintf=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_c_snprintf" >&5 $as_echo "$ac_cv_lib_c_snprintf" >&6; } if test "x$ac_cv_lib_c_snprintf" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBC 1 _ACEOF LIBS="-lc $LIBS" fi # libz has to come before libpci because libpci needs it now. { $as_echo "$as_me:$LINENO: checking for gzopen in -lz" >&5 $as_echo_n "checking for gzopen in -lz... " >&6; } if test "${ac_cv_lib_z_gzopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lz $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char gzopen (); int main () { return gzopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_z_gzopen=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_z_gzopen=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_z_gzopen" >&5 $as_echo "$ac_cv_lib_z_gzopen" >&6; } if test "x$ac_cv_lib_z_gzopen" = x""yes; then true else { { $as_echo "$as_me:$LINENO: error: You must install zlib-devel (Fedora/Red Hat/SuSE), libzip-dev (Debian/Ubuntu), or equivalent" >&5 $as_echo "$as_me: error: You must install zlib-devel (Fedora/Red Hat/SuSE), libzip-dev (Debian/Ubuntu), or equivalent" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: checking for pci_alloc in -lpci" >&5 $as_echo_n "checking for pci_alloc in -lpci... " >&6; } if test "${ac_cv_lib_pci_pci_alloc+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lpci -lz $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char pci_alloc (); int main () { return pci_alloc (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_pci_pci_alloc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_pci_pci_alloc=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_pci_pci_alloc" >&5 $as_echo "$ac_cv_lib_pci_pci_alloc" >&6; } if test "x$ac_cv_lib_pci_pci_alloc" = x""yes; then true else { { $as_echo "$as_me:$LINENO: error: You must install pciutils-devel (Fedora/Red Hat/SuSE), pciutils-dev (Debian/Ubuntu), or equivalent" >&5 $as_echo "$as_me: error: You must install pciutils-devel (Fedora/Red Hat/SuSE), pciutils-dev (Debian/Ubuntu), or equivalent" >&2;} { (exit 1); exit 1; }; } fi # Checks for header files. { $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5 $as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } if test "${ac_cv_header_sys_wait_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif int main () { int s; wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_sys_wait_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_sys_wait_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 $as_echo "$ac_cv_header_sys_wait_h" >&6; } if test $ac_cv_header_sys_wait_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_SYS_WAIT_H 1 _ACEOF fi for ac_header in fcntl.h limits.h locale.h stddef.h stdint.h stdlib.h string.h sys/ioctl.h sys/time.h syslog.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done if test "${ac_cv_header_pci_pci_h+set}" = set; then { $as_echo "$as_me:$LINENO: checking for pci/pci.h" >&5 $as_echo_n "checking for pci/pci.h... " >&6; } if test "${ac_cv_header_pci_pci_h+set}" = set; then $as_echo_n "(cached) " >&6 fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_pci_pci_h" >&5 $as_echo "$ac_cv_header_pci_pci_h" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking pci/pci.h usability" >&5 $as_echo_n "checking pci/pci.h usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking pci/pci.h presence" >&5 $as_echo_n "checking pci/pci.h presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: pci/pci.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: pci/pci.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: pci/pci.h: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: pci/pci.h: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: pci/pci.h: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: pci/pci.h: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: pci/pci.h: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: pci/pci.h: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: pci/pci.h: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for pci/pci.h" >&5 $as_echo_n "checking for pci/pci.h... " >&6; } if test "${ac_cv_header_pci_pci_h+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_header_pci_pci_h=$ac_header_preproc fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_pci_pci_h" >&5 $as_echo "$ac_cv_header_pci_pci_h" >&6; } fi if test "x$ac_cv_header_pci_pci_h" = x""yes; then : else { { $as_echo "$as_me:$LINENO: error: You must install pciutils-devel or equivalent" >&5 $as_echo "$as_me: error: You must install pciutils-devel or equivalent" >&2;} { (exit 1); exit 1; }; } fi if test "${ac_cv_header_zlib_h+set}" = set; then { $as_echo "$as_me:$LINENO: checking for zlib.h" >&5 $as_echo_n "checking for zlib.h... " >&6; } if test "${ac_cv_header_zlib_h+set}" = set; then $as_echo_n "(cached) " >&6 fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 $as_echo "$ac_cv_header_zlib_h" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking zlib.h usability" >&5 $as_echo_n "checking zlib.h usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking zlib.h presence" >&5 $as_echo_n "checking zlib.h presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: zlib.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: zlib.h: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: zlib.h: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: zlib.h: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: zlib.h: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: zlib.h: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: zlib.h: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for zlib.h" >&5 $as_echo_n "checking for zlib.h... " >&6; } if test "${ac_cv_header_zlib_h+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_header_zlib_h=$ac_header_preproc fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 $as_echo "$ac_cv_header_zlib_h" >&6; } fi if test "x$ac_cv_header_zlib_h" = x""yes; then : else { { $as_echo "$as_me:$LINENO: error: You must install zlib-devel or equivalent" >&5 $as_echo "$as_me: error: You must install zlib-devel or equivalent" >&2;} { (exit 1); exit 1; }; } fi # Check for pci_dev.domain { $as_echo "$as_me:$LINENO: checking for struct pci_dev.domain" >&5 $as_echo_n "checking for struct pci_dev.domain... " >&6; } if test "${ac_cv_member_struct_pci_dev_domain+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static struct pci_dev ac_aggr; if (ac_aggr.domain) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_struct_pci_dev_domain=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static struct pci_dev ac_aggr; if (sizeof ac_aggr.domain) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_struct_pci_dev_domain=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_member_struct_pci_dev_domain=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_pci_dev_domain" >&5 $as_echo "$ac_cv_member_struct_pci_dev_domain" >&6; } if test "x$ac_cv_member_struct_pci_dev_domain" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_PCI_DEV_DOMAIN 1 _ACEOF fi # Checks for typedefs, structures, and compiler characteristics. { $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if test "${ac_cv_c_const+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset cs; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_c_const=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then cat >>confdefs.h <<\_ACEOF #define const /**/ _ACEOF fi { $as_echo "$as_me:$LINENO: checking for inline" >&5 $as_echo_n "checking for inline... " >&6; } if test "${ac_cv_c_inline+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifndef __cplusplus typedef int foo_t; static $ac_kw foo_t static_foo () {return 0; } $ac_kw foo_t foo () {return 0; } #endif _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_c_inline=$ac_kw else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_inline" != no && break done fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 $as_echo "$ac_cv_c_inline" >&6; } case $ac_cv_c_inline in inline | yes) ;; *) case $ac_cv_c_inline in no) ac_val=;; *) ac_val=$ac_cv_c_inline;; esac cat >>confdefs.h <<_ACEOF #ifndef __cplusplus #define inline $ac_val #endif _ACEOF ;; esac { $as_echo "$as_me:$LINENO: checking for off_t" >&5 $as_echo_n "checking for off_t... " >&6; } if test "${ac_cv_type_off_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_off_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (off_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((off_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_off_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 $as_echo "$ac_cv_type_off_t" >&6; } if test "x$ac_cv_type_off_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define off_t long int _ACEOF fi { $as_echo "$as_me:$LINENO: checking for size_t" >&5 $as_echo_n "checking for size_t... " >&6; } if test "${ac_cv_type_size_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_size_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (size_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((size_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_size_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 $as_echo "$ac_cv_type_size_t" >&6; } if test "x$ac_cv_type_size_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi { $as_echo "$as_me:$LINENO: checking for ssize_t" >&5 $as_echo_n "checking for ssize_t... " >&6; } if test "${ac_cv_type_ssize_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_ssize_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (ssize_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((ssize_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_ssize_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_ssize_t" >&5 $as_echo "$ac_cv_type_ssize_t" >&6; } if test "x$ac_cv_type_ssize_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define ssize_t int _ACEOF fi { $as_echo "$as_me:$LINENO: checking for uint8_t" >&5 $as_echo_n "checking for uint8_t... " >&6; } if test "${ac_cv_c_uint8_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_c_uint8_t=no for ac_type in 'uint8_t' 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(($ac_type) -1 >> (8 - 1) == 1)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then case $ac_type in uint8_t) ac_cv_c_uint8_t=yes ;; *) ac_cv_c_uint8_t=$ac_type ;; esac else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_uint8_t" != no && break done fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint8_t" >&5 $as_echo "$ac_cv_c_uint8_t" >&6; } case $ac_cv_c_uint8_t in #( no|yes) ;; #( *) cat >>confdefs.h <<\_ACEOF #define _UINT8_T 1 _ACEOF cat >>confdefs.h <<_ACEOF #define uint8_t $ac_cv_c_uint8_t _ACEOF ;; esac { $as_echo "$as_me:$LINENO: checking for uint16_t" >&5 $as_echo_n "checking for uint16_t... " >&6; } if test "${ac_cv_c_uint16_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_c_uint16_t=no for ac_type in 'uint16_t' 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(($ac_type) -1 >> (16 - 1) == 1)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then case $ac_type in uint16_t) ac_cv_c_uint16_t=yes ;; *) ac_cv_c_uint16_t=$ac_type ;; esac else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_uint16_t" != no && break done fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint16_t" >&5 $as_echo "$ac_cv_c_uint16_t" >&6; } case $ac_cv_c_uint16_t in #( no|yes) ;; #( *) cat >>confdefs.h <<_ACEOF #define uint16_t $ac_cv_c_uint16_t _ACEOF ;; esac { $as_echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 $as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } if test "${ac_cv_header_time+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include int main () { if ((struct tm *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_time=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_time=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 $as_echo "$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then cat >>confdefs.h <<\_ACEOF #define TIME_WITH_SYS_TIME 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 $as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } if test "${ac_cv_struct_tm+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { struct tm tm; int *p = &tm.tm_sec; return !p; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_struct_tm=time.h else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_struct_tm=sys/time.h fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 $as_echo "$ac_cv_struct_tm" >&6; } if test $ac_cv_struct_tm = sys/time.h; then cat >>confdefs.h <<\_ACEOF #define TM_IN_SYS_TIME 1 _ACEOF fi # Checks for library functions. # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! { $as_echo "$as_me:$LINENO: checking for working alloca.h" >&5 $as_echo_n "checking for working alloca.h... " >&6; } if test "${ac_cv_working_alloca_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { char *p = (char *) alloca (2 * sizeof (int)); if (p) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_working_alloca_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_working_alloca_h=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 $as_echo "$ac_cv_working_alloca_h" >&6; } if test $ac_cv_working_alloca_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA_H 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for alloca" >&5 $as_echo_n "checking for alloca... " >&6; } if test "${ac_cv_func_alloca_works+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __GNUC__ # define alloca __builtin_alloca #else # ifdef _MSC_VER # include # define alloca _alloca # else # ifdef HAVE_ALLOCA_H # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); # endif # endif # endif # endif #endif int main () { char *p = (char *) alloca (1); if (p) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_alloca_works=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_alloca_works=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 $as_echo "$ac_cv_func_alloca_works" >&6; } if test $ac_cv_func_alloca_works = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA 1 _ACEOF else # The SVR3 libPW and SVR4 libucb both contain incompatible functions # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. ALLOCA=\${LIBOBJDIR}alloca.$ac_objext cat >>confdefs.h <<\_ACEOF #define C_ALLOCA 1 _ACEOF { $as_echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 $as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; } if test "${ac_cv_os_cray+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined CRAY && ! defined CRAY2 webecray #else wenotbecray #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "webecray" >/dev/null 2>&1; then ac_cv_os_cray=yes else ac_cv_os_cray=no fi rm -f conftest* fi { $as_echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 $as_echo "$ac_cv_os_cray" >&6; } if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define CRAY_STACKSEG_END $ac_func _ACEOF break fi done fi { $as_echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 $as_echo_n "checking stack direction for C alloca... " >&6; } if test "${ac_cv_c_stack_direction+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_c_stack_direction=0 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int find_stack_direction () { static char *addr = 0; auto char dummy; if (addr == 0) { addr = &dummy; return find_stack_direction (); } else return (&dummy > addr) ? 1 : -1; } int main () { return find_stack_direction () < 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_stack_direction=1 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_c_stack_direction=-1 fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 $as_echo "$ac_cv_c_stack_direction" >&6; } cat >>confdefs.h <<_ACEOF #define STACK_DIRECTION $ac_cv_c_stack_direction _ACEOF fi { $as_echo "$as_me:$LINENO: checking for pid_t" >&5 $as_echo_n "checking for pid_t... " >&6; } if test "${ac_cv_type_pid_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_pid_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (pid_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((pid_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_pid_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 $as_echo "$ac_cv_type_pid_t" >&6; } if test "x$ac_cv_type_pid_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define pid_t int _ACEOF fi for ac_header in vfork.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in fork vfork do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done if test "x$ac_cv_func_fork" = xyes; then { $as_echo "$as_me:$LINENO: checking for working fork" >&5 $as_echo_n "checking for working fork... " >&6; } if test "${ac_cv_func_fork_works+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_fork_works=cross else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { /* By Ruediger Kuhlmann. */ return fork () < 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_fork_works=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_fork_works=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 $as_echo "$ac_cv_func_fork_works" >&6; } else ac_cv_func_fork_works=$ac_cv_func_fork fi if test "x$ac_cv_func_fork_works" = xcross; then case $host in *-*-amigaos* | *-*-msdosdjgpp*) # Override, as these systems have only a dummy fork() stub ac_cv_func_fork_works=no ;; *) ac_cv_func_fork_works=yes ;; esac { $as_echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} fi ac_cv_func_vfork_works=$ac_cv_func_vfork if test "x$ac_cv_func_vfork" = xyes; then { $as_echo "$as_me:$LINENO: checking for working vfork" >&5 $as_echo_n "checking for working vfork... " >&6; } if test "${ac_cv_func_vfork_works+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_vfork_works=cross else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Thanks to Paul Eggert for this test. */ $ac_includes_default #include #ifdef HAVE_VFORK_H # include #endif /* On some sparc systems, changes by the child to local and incoming argument registers are propagated back to the parent. The compiler is told about this with #include , but some compilers (e.g. gcc -O) don't grok . Test for this by using a static variable whose address is put into a register that is clobbered by the vfork. */ static void #ifdef __cplusplus sparc_address_test (int arg) # else sparc_address_test (arg) int arg; #endif { static pid_t child; if (!child) { child = vfork (); if (child < 0) { perror ("vfork"); _exit(2); } if (!child) { arg = getpid(); write(-1, "", 0); _exit (arg); } } } int main () { pid_t parent = getpid (); pid_t child; sparc_address_test (0); child = vfork (); if (child == 0) { /* Here is another test for sparc vfork register problems. This test uses lots of local variables, at least as many local variables as main has allocated so far including compiler temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should reuse the register of parent for one of the local variables, since it will think that parent can't possibly be used any more in this routine. Assigning to the local variable will thus munge parent in the parent process. */ pid_t p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); /* Convince the compiler that p..p7 are live; otherwise, it might use the same hardware register for all 8 local variables. */ if (p != p1 || p != p2 || p != p3 || p != p4 || p != p5 || p != p6 || p != p7) _exit(1); /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent from child file descriptors. If the child closes a descriptor before it execs or exits, this munges the parent's descriptor as well. Test for this by closing stdout in the child. */ _exit(close(fileno(stdout)) != 0); } else { int status; struct stat st; while (wait(&status) != child) ; return ( /* Was there some problem with vforking? */ child < 0 /* Did the child fail? (This shouldn't happen.) */ || status /* Did the vfork/compiler bug occur? */ || parent != getpid() /* Did the file descriptor bug occur? */ || fstat(fileno(stdout), &st) != 0 ); } } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_vfork_works=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_vfork_works=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 $as_echo "$ac_cv_func_vfork_works" >&6; } fi; if test "x$ac_cv_func_fork_works" = xcross; then ac_cv_func_vfork_works=$ac_cv_func_vfork { $as_echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} fi if test "x$ac_cv_func_vfork_works" = xyes; then cat >>confdefs.h <<\_ACEOF #define HAVE_WORKING_VFORK 1 _ACEOF else cat >>confdefs.h <<\_ACEOF #define vfork fork _ACEOF fi if test "x$ac_cv_func_fork_works" = xyes; then cat >>confdefs.h <<\_ACEOF #define HAVE_WORKING_FORK 1 _ACEOF fi if test $ac_cv_c_compiler_gnu = yes; then { $as_echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 $as_echo_n "checking whether $CC needs -traditional... " >&6; } if test "${ac_cv_prog_gcc_traditional+set}" = set; then $as_echo_n "(cached) " >&6 else ac_pattern="Autoconf.*'x'" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include Autoconf TIOCGETP _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes else ac_cv_prog_gcc_traditional=no fi rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include Autoconf TCGETA _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes fi rm -f conftest* fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 $as_echo "$ac_cv_prog_gcc_traditional" >&6; } if test $ac_cv_prog_gcc_traditional = yes; then CC="$CC -traditional" fi fi for ac_header in stdlib.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 $as_echo_n "checking for GNU libc compatible malloc... " >&6; } if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_malloc_0_nonnull=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *malloc (); #endif int main () { return ! malloc (0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_malloc_0_nonnull=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_malloc_0_nonnull=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 $as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } if test $ac_cv_func_malloc_0_nonnull = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_MALLOC 1 _ACEOF else cat >>confdefs.h <<\_ACEOF #define HAVE_MALLOC 0 _ACEOF case " $LIBOBJS " in *" malloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; esac cat >>confdefs.h <<\_ACEOF #define malloc rpl_malloc _ACEOF fi { $as_echo "$as_me:$LINENO: checking for working memcmp" >&5 $as_echo_n "checking for working memcmp... " >&6; } if test "${ac_cv_func_memcmp_working+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_memcmp_working=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { /* Some versions of memcmp are not 8-bit clean. */ char c0 = '\100', c1 = '\200', c2 = '\201'; if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0) return 1; /* The Next x86 OpenStep bug shows up only when comparing 16 bytes or more and with at least one buffer not starting on a 4-byte boundary. William Lewis provided this test program. */ { char foo[21]; char bar[21]; int i; for (i = 0; i < 4; i++) { char *a = foo + i; char *b = bar + i; strcpy (a, "--------01111111"); strcpy (b, "--------10000000"); if (memcmp (a, b, 16) >= 0) return 1; } return 0; } ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_memcmp_working=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_memcmp_working=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_memcmp_working" >&5 $as_echo "$ac_cv_func_memcmp_working" >&6; } test $ac_cv_func_memcmp_working = no && case " $LIBOBJS " in *" memcmp.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" ;; esac for ac_header in stdlib.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in getpagesize do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for working mmap" >&5 $as_echo_n "checking for working mmap... " >&6; } if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_mmap_fixed_mapped=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default /* malloc might have been renamed as rpl_malloc. */ #undef malloc /* Thanks to Mike Haertel and Jim Avera for this test. Here is a matrix of mmap possibilities: mmap private not fixed mmap private fixed at somewhere currently unmapped mmap private fixed at somewhere already mapped mmap shared not fixed mmap shared fixed at somewhere currently unmapped mmap shared fixed at somewhere already mapped For private mappings, we should verify that changes cannot be read() back from the file, nor mmap's back from the file at a different address. (There have been systems where private was not correctly implemented like the infamous i386 svr4.0, and systems where the VM page cache was not coherent with the file system buffer cache like early versions of FreeBSD and possibly contemporary NetBSD.) For shared mappings, we should conversely verify that changes get propagated back to all the places they're supposed to be. Grep wants private fixed already mapped. The main things grep needs to know about mmap are: * does it exist and is it safe to write into the mmap'd area * how to use it (BSD variants) */ #include #include #if !defined STDC_HEADERS && !defined HAVE_STDLIB_H char *malloc (); #endif /* This mess was copied from the GNU getpagesize.h. */ #ifndef HAVE_GETPAGESIZE /* Assume that all systems that can run configure have sys/param.h. */ # ifndef HAVE_SYS_PARAM_H # define HAVE_SYS_PARAM_H 1 # endif # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ # ifdef HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE # else /* no EXEC_PAGESIZE */ # ifdef NBPG # define getpagesize() NBPG * CLSIZE # ifndef CLSIZE # define CLSIZE 1 # endif /* no CLSIZE */ # else /* no NBPG */ # ifdef NBPC # define getpagesize() NBPC # else /* no NBPC */ # ifdef PAGESIZE # define getpagesize() PAGESIZE # endif /* PAGESIZE */ # endif /* no NBPC */ # endif /* no NBPG */ # endif /* no EXEC_PAGESIZE */ # else /* no HAVE_SYS_PARAM_H */ # define getpagesize() 8192 /* punt totally */ # endif /* no HAVE_SYS_PARAM_H */ # endif /* no _SC_PAGESIZE */ #endif /* no HAVE_GETPAGESIZE */ int main () { char *data, *data2, *data3; int i, pagesize; int fd; pagesize = getpagesize (); /* First, make a file with some known garbage in it. */ data = (char *) malloc (pagesize); if (!data) return 1; for (i = 0; i < pagesize; ++i) *(data + i) = rand (); umask (0); fd = creat ("conftest.mmap", 0600); if (fd < 0) return 1; if (write (fd, data, pagesize) != pagesize) return 1; close (fd); /* Next, try to mmap the file at a fixed address which already has something else allocated at it. If we can, also make sure that we see the same garbage. */ fd = open ("conftest.mmap", O_RDWR); if (fd < 0) return 1; data2 = (char *) malloc (2 * pagesize); if (!data2) return 1; data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1); if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED, fd, 0L)) return 1; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data2 + i)) return 1; /* Finally, make sure that changes to the mapped area do not percolate back to the file as seen by read(). (This is a bug on some variants of i386 svr4.0.) */ for (i = 0; i < pagesize; ++i) *(data2 + i) = *(data2 + i) + 1; data3 = (char *) malloc (pagesize); if (!data3) return 1; if (read (fd, data3, pagesize) != pagesize) return 1; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data3 + i)) return 1; close (fd); return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_mmap_fixed_mapped=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_mmap_fixed_mapped=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 $as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; } if test $ac_cv_func_mmap_fixed_mapped = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_MMAP 1 _ACEOF fi rm -f conftest.mmap for ac_header in stdlib.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5 $as_echo_n "checking for GNU libc compatible realloc... " >&6; } if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_realloc_0_nonnull=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *realloc (); #endif int main () { return ! realloc (0, 0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_realloc_0_nonnull=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_realloc_0_nonnull=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5 $as_echo "$ac_cv_func_realloc_0_nonnull" >&6; } if test $ac_cv_func_realloc_0_nonnull = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_REALLOC 1 _ACEOF else cat >>confdefs.h <<\_ACEOF #define HAVE_REALLOC 0 _ACEOF case " $LIBOBJS " in *" realloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS realloc.$ac_objext" ;; esac cat >>confdefs.h <<\_ACEOF #define realloc rpl_realloc _ACEOF fi for ac_header in sys/select.h sys/socket.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to Jordan_Hargrave@dell.com ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking types of arguments for select" >&5 $as_echo_n "checking types of arguments for select... " >&6; } if test "${ac_cv_func_select_args+set}" = set; then $as_echo_n "(cached) " >&6 else for ac_arg234 in 'fd_set *' 'int *' 'void *'; do for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #ifdef HAVE_SYS_SELECT_H # include #endif #ifdef HAVE_SYS_SOCKET_H # include #endif int main () { extern int select ($ac_arg1, $ac_arg234, $ac_arg234, $ac_arg234, $ac_arg5); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done done done # Provide a safe default value. : ${ac_cv_func_select_args='int,int *,struct timeval *'} fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5 $as_echo "$ac_cv_func_select_args" >&6; } ac_save_IFS=$IFS; IFS=',' set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'` IFS=$ac_save_IFS shift cat >>confdefs.h <<_ACEOF #define SELECT_TYPE_ARG1 $1 _ACEOF cat >>confdefs.h <<_ACEOF #define SELECT_TYPE_ARG234 ($2) _ACEOF cat >>confdefs.h <<_ACEOF #define SELECT_TYPE_ARG5 ($3) _ACEOF rm -f conftest* { $as_echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 $as_echo_n "checking whether lstat dereferences a symlink specified with a trailing slash... " >&6; } if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then $as_echo_n "(cached) " >&6 else rm -f conftest.sym conftest.file echo >conftest.file if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then if test "$cross_compiling" = yes; then ac_cv_func_lstat_dereferences_slashed_symlink=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { struct stat sbuf; /* Linux will dereference the symlink and fail. That is better in the sense that it means we will not have to compile and use the lstat wrapper. */ return lstat ("conftest.sym/", &sbuf) == 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_lstat_dereferences_slashed_symlink=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_lstat_dereferences_slashed_symlink=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi else # If the `ln -s' command failed, then we probably don't even # have an lstat function. ac_cv_func_lstat_dereferences_slashed_symlink=no fi rm -f conftest.sym conftest.file fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 $as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && cat >>confdefs.h <<_ACEOF #define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 _ACEOF if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then case " $LIBOBJS " in *" lstat.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS lstat.$ac_objext" ;; esac fi { $as_echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 $as_echo_n "checking whether stat accepts an empty string... " >&6; } if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_stat_empty_string_bug=yes else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { struct stat sbuf; return stat ("", &sbuf) == 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_stat_empty_string_bug=no else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_stat_empty_string_bug=yes fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 $as_echo "$ac_cv_func_stat_empty_string_bug" >&6; } if test $ac_cv_func_stat_empty_string_bug = yes; then case " $LIBOBJS " in *" stat.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS stat.$ac_objext" ;; esac cat >>confdefs.h <<_ACEOF #define HAVE_STAT_EMPTY_STRING_BUG 1 _ACEOF fi for ac_func in vprintf do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF { $as_echo "$as_me:$LINENO: checking for _doprnt" >&5 $as_echo_n "checking for _doprnt... " >&6; } if test "${ac_cv_func__doprnt+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define _doprnt to an innocuous variant, in case declares _doprnt. For example, HP-UX 11i declares gettimeofday. */ #define _doprnt innocuous__doprnt /* System header to define __stub macros and hopefully few prototypes, which can conflict with char _doprnt (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef _doprnt /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char _doprnt (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub__doprnt || defined __stub____doprnt choke me #endif int main () { return _doprnt (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func__doprnt=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func__doprnt=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 $as_echo "$ac_cv_func__doprnt" >&6; } if test "x$ac_cv_func__doprnt" = x""yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_DOPRNT 1 _ACEOF fi fi done for ac_func in dup2 gettimeofday memset munmap select socket strcasecmp strchr strdup strerror strncasecmp strpbrk strrchr strstr strtol strtoul do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done # this is ugly, but accounts for SLES 10, Red Hat/Fedora, and Ubuntu # handles default udev rules as of udev 114 or thereabouts RULEDEST=/lib/udev/rules.d/71-biosdevname.rules if [ -e /etc/udev/rules.d/60-net.rules ]; then # RHEL 5 / Fedora RULEDEST=/etc/udev/rules.d/60-biosdevname.rules elif [ -e /etc/udev/rules.d/31-network.rules ]; then # SLES 10 RULEDEST=/etc/udev/rules.d/31-biosdevname.rules elif [ -e /etc/udev/rules.d/25-iftab.rules ]; then # older Ubuntu RULEDEST=/etc/udev/rules.d/25-biosdevname.rules fi RULEDIR=$(dirname $RULEDEST) RULEDEST=$RULEDEST RULEDIR=$RULEDIR echo "PACKAGE_NAME='$PACKAGE_NAME'" > version echo "PACKAGE_VERSION='$PACKAGE_VERSION'" >> version echo "PACKAGE_STRING='$PACKAGE_STRING'" >> version ac_config_files="$ac_config_files Makefile biosdevname.spec.fedora biosdevname.spec.suse" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by biosdevname $as_me 0.4.1, which was generated by GNU Autoconf 2.63. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTION]... [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ biosdevname config.status 0.4.1 configured by $0, generated by GNU Autoconf 2.63, with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header { $as_echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; };; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { $as_echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "biosdevname.spec.fedora") CONFIG_FILES="$CONFIG_FILES biosdevname.spec.fedora" ;; "biosdevname.spec.suse") CONFIG_FILES="$CONFIG_FILES biosdevname.spec.suse" ;; *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 $as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || { $as_echo "$as_me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=' ' ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\).*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\).*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 $as_echo "$as_me: error: could not setup config files machinery" >&2;} { (exit 1); exit 1; }; } _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 $as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 $as_echo "$as_me: error: could not setup config headers machinery" >&2;} { (exit 1); exit 1; }; } fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 $as_echo "$as_me: error: invalid tag $ac_tag" >&2;} { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 $as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} { (exit 1); exit 1; }; };; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ac_file_inputs="$ac_file_inputs '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p ' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 $as_echo "$as_me: error: could not create -" >&2;} { (exit 1); exit 1; }; } fi # Compute "$ac_file"'s index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in "$ac_file" | "$ac_file":* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for "$ac_file"" >`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir=$dirpart/$fdir case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done # for ac_tag { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 $as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi biosdevname-0.4.1/Makefile.am0000644000000000000000000000403011766436556012753 00000000000000AUTOMAKE_OPTIONS = subdir-objects SUBDIRS = EXTRA_DIST = pkg dist_noinst_DATA = biosdevname.rules.in biosdevname.spec.fedora biosdevname.spec.suse biosdevname.1 CLEANFILES = version install-data-local: mkdir -p $(DESTDIR)@RULEDIR@ $(INSTALL_DATA) $(top_srcdir)/biosdevname.rules.in $(DESTDIR)@RULEDEST@ uninstall-local: rm -f $(DESTDIR)@RULEDEST@ include src/Makefile.am # extra space at beginning to work around automake... :( ifndef SPEC_FILE SPEC_FILE=biosdevname.spec.fedora endif rpm: dist mkdir -p dist/{SOURCES,BUILD,RPMS,SRPMS,SPECS} cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz dist/SOURCES cp $(SPEC_FILE) dist/SPECS/@PACKAGE_NAME@.spec rpmbuild --define "_topdir $$PWD/dist" -ba --nodeps dist/SPECS/@PACKAGE_NAME@.spec ; rm -rf dist/{SOURCES,BUILD,SPECS} srpm: dist mkdir -p dist/{SOURCES,BUILD,RPMS,SRPMS,SPECS} cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz dist/SOURCES cp $(SPEC_FILE) dist/SPECS/@PACKAGE_NAME@.spec rpmbuild --define "_topdir $$PWD/dist" -bs --nodeps dist/SPECS/@PACKAGE_NAME@.spec ; rm -rf dist/{SOURCES,BUILD,SPECS} deb: dist oldpwd=`pwd` ; \ tmp_dir=`mktemp -d /tmp/$(PACKAGE_NAME).XXXXXXXX` ; \ cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz $${tmp_dir}/$(PACKAGE_NAME)_$(PACKAGE_VERSION).orig.tar.gz ; \ tar -C $${tmp_dir} -xzf $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz ; \ cd $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION) ; \ mv pkg/debian debian ; \ rmdir pkg/ ; \ pdebuild --buildresult $$oldpwd/.. ; \ cd - ;\ rm -rf $${tmp_dir} sdeb: dist oldpwd=`pwd` ; \ tmp_dir=`mktemp -d /tmp/biosdevname.XXXXXXXX` ; \ cp $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz $${tmp_dir}/$(PACKAGE_NAME)_$(PACKAGE_VERSION).orig.tar.gz ; \ tar -C $${tmp_dir} -xzf $(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz ; \ mv $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION)/pkg/debian $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION)/debian ; \ rmdir pkg/ ; \ cd $${tmp_dir}/$(PACKAGE_NAME)-$(PACKAGE_VERSION) ; \ dpkg-buildpackage -S -sa -rfakeroot -k92F0FC09 ; \ mv ../biosdevname_* $$oldpwd/.. ; \ cd - ;\ rm -rf $${tmp_dir}