debian/0000755000000000000000000000000011656265155007202 5ustar debian/control0000644000000000000000000000205011656265000010567 0ustar Source: cdck Section: utils Priority: optional Maintainer: gregor herrmann Uploaders: tony mancill Build-Depends: debhelper (>= 8), autotools-dev (>= 20100122.1) Standards-Version: 3.9.2 Homepage: http://swaj.net/unix/index.html#cdck Vcs-Svn: http://svn.toastfreeware.priv.at/debian/cdck/trunk/ Vcs-Browser: http://svn.toastfreeware.priv.at/wsvn/ToastfreewareDebian/cdck/trunk/ Package: cdck Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Suggests: gnuplot Description: tool for verifying the quality of written CDs/DVDs cdck (CD/DVD check tool) is a simple console program to verify CD/DVD quality. The known fact is that even if all files on the disc are readable, some sectors having bad timing can easily turn into unreadable ones in the future. . To get an idea about a disc cdck reads it sector by sector, keeping all reading timings and then tells you its verdict. Optionally it can write the timing table into text file usable by gnuplot(1) program, so you can draw some graphs out of it. debian/clean0000644000000000000000000000004111377010145010165 0ustar src/config.h src/cdck man/cdck.1 debian/cdck.docs0000644000000000000000000000002611275103671010745 0ustar README THANKS AUTHORS debian/copyright0000644000000000000000000000206211656261267011135 0ustar Format-Specification: http://svn.debian.org/wsvn/dep/web/deps/dep5.mdwn?op=file&rev=135 Maintainer: Alexey Semenoff Source: http://swaj.net/unix/index.html#cdck Name: cdck Files: * Copyright: 2005-2008, Alexey Semenoff License: GPL-2+ Files: src/lib_cdinfo.* Copyright: 1996,1997, Gerd Knorr 1996,1997, Heiko Eissfeldt " License: GPL X-Comment: http://www.ibiblio.org/pub/linux/utils/disk-management/cdinfo.c http://www.ibiblio.org/pub/Linux/utils/disk-management/cdinfo.lsm Files: debian/* Copyright: 2006-2011, gregor herrmann 2006-2011, tony mancill License: GPL-2+ License: GPL-2+ This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 dated June, 1991, or (at your option) any later version. . On Debian systems, the complete text of version 2 of the GNU General Public License can be found in `/usr/share/common-licenses/GPL-2'. debian/watch0000644000000000000000000000014510430135177010220 0ustar # Compulsory line, this is a version 3 file version=3 http://swaj.net/unix/ cdck/cdck-(.*)\.tar\.gz debian/patches/0000755000000000000000000000000011656265073010630 5ustar debian/patches/hurd.patch0000644000000000000000000000137511656260740012615 0ustar Description: add support for building on hurd-i386 Origin: vendor Bug-Debian: http://bugs.debian.org/647969 Forwarded: no Author: Samuel Thibault Reviewed-by: gregor herrmann Last-Update: 2011-11-08 --- a/src/lib_cdinfo.cpp +++ b/src/lib_cdinfo.cpp @@ -25,7 +25,12 @@ #include #include +#ifdef __linux__ #include +#endif +#ifdef __GNU__ +#include +#endif #include "defines.h" #include "debugging.h" --- a/src/lib_main.cpp +++ b/src/lib_main.cpp @@ -19,7 +19,12 @@ #include #include +#ifdef __linux__ #include +#endif +#ifdef __GNU__ +#include +#endif #include "defines.h" #include "debugging.h" debian/patches/man.patch0000644000000000000000000000216011377012343012411 0ustar Author: gregor herrmann Last-Update: 2010-05-25 Description: - fix calls to pod2man - remove stray "=cut", leads to pod2man errors - add a note about using the gnuplot datafile Bugs-Ubuntu: https://bugs.launchpad.net/bugs/476591 --- a/man/Makefile.in +++ b/man/Makefile.in @@ -288,7 +288,7 @@ cdck.1: - pod2man --section=cdck.1 --verbose cdck_man.in > cdck.1 + pod2man --section=1 --verbose --name=cdck cdck_man.in > cdck.1 # # __END__ --- a/man/Makefile.am +++ b/man/Makefile.am @@ -11,7 +11,7 @@ EXTRA_DIST = cdck_man.in cdck.1: - pod2man --section=cdck.1 --verbose cdck_man.in > cdck.1 + pod2man --section=1 --verbose --name=cdck cdck_man.in > cdck.1 # --- a/man/cdck_man.in +++ b/man/cdck_man.in @@ -1,5 +1,3 @@ -=cut - =head1 NAME cdck - simple CD/DVD check program @@ -26,6 +24,10 @@ -v Verbose operations + To actually plot your data you have to start gnuplot and plot the datafile: + $ gnuplot + gnuplot> plot "cdck-plot.dat" + =head1 COPYRIGHT This manpage was written by gregor herrmann for the debian/patches/wording.patch0000644000000000000000000000131011377012403013300 0ustar Description: improve wording Author: DenverD Reviewed-by: gregor herrmann Last-Update: 2010-05-25 --- a/src/lib_main.cpp +++ b/src/lib_main.cpp @@ -566,7 +566,7 @@ fprintf (stdout, "\nConclusion:\n"); if (bad_sectors > 0) { - fprintf (stdout, " Disc contains BAD or even readable sectors, put it into trash can!\n"); + fprintf (stdout, " Disc contains BAD or even unreadable sectors, put it into trash can!\n"); return; } @@ -580,7 +580,7 @@ return; } - fprintf (stdout, " Even there is no unreadable sectors, disc is unstable!\n"); + fprintf (stdout, " Even though there are no unreadable sectors, disc is unstable!\n"); } void Ccdrom::DeallocateTimings() debian/patches/series0000644000000000000000000000006111656265000012030 0ustar man.patch libtool.patch wording.patch hurd.patch debian/patches/libtool.patch0000644000000000000000000223711111656265000013312 0ustar Description: update ltmain.sh and aclocal.m4 Author: gregor herrmann Last-Update: 2010-05-25 Bugs-Debian: http://bugs.debian.org/375634 --- a/ltmain.sh +++ b/ltmain.sh @@ -1,7 +1,7 @@ # ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # @@ -17,13 +17,41 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION="1.5.22 Debian 1.5.22-4" +TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes. +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. @@ -36,7 +64,7 @@ : else # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} + exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then @@ -45,19 +73,9 @@ cat <&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 + $echo "$modename: not configured to build any kind of library" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE fi # Global variables. @@ -102,11 +132,268 @@ show="$echo" show_help= execute_dlfiles= +duplicate_deps=no +preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $mkdir "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || { + $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 + exit $EXIT_FAILURE + } + fi + + $echo "X$my_tmpdir" | $Xsed +} + + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + + $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" + $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 + exit $EXIT_FAILURE + fi +} + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + my_status="" + + $show "${rm}r $my_gentop" + $run ${rm}r "$my_gentop" + $show "$mkdir $my_gentop" + $run $mkdir "$my_gentop" + my_status=$? + if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then + exit $my_status + fi + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` + my_xdir="$my_gentop/$my_xlib" + + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" + $show "$mkdir $my_xdir" + $run $mkdir "$my_xdir" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then + exit $exit_status + fi + case $host in + *-darwin*) + $show "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + if test -z "$run"; then + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` + if test -n "$darwin_arches"; then + darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + $show "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we have a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + lipo -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + ${rm}r unfat-$$ + cd "$darwin_orig_dir" + else + cd "$darwin_orig_dir" + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + fi # $run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + func_extract_archives_result="$my_oldobjs" +} +# End of Shell function definitions +##################################### + +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" + +disable_libs=no + # Parse our command line options once, thoroughly. -while test $# -gt 0 +while test "$#" -gt 0 do arg="$1" shift @@ -122,6 +409,34 @@ execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; *) eval "$prev=\$arg" ;; @@ -139,18 +454,27 @@ ;; --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - exit 0 + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2005 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $? ;; --config) - sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 - exit 0 + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done + exit $? ;; --debug) - echo "$progname: enabling shell trace mode" + $echo "$progname: enabling shell trace mode" set -x + preserve_args="$preserve_args $arg" ;; --dry-run | -n) @@ -158,18 +482,18 @@ ;; --features) - echo "host: $host" + $echo "host: $host" if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" + $echo "enable shared libraries" else - echo "disable shared libraries" + $echo "disable shared libraries" fi if test "$build_old_libs" = yes; then - echo "enable static libraries" + $echo "enable static libraries" else - echo "disable static libraries" + $echo "disable static libraries" fi - exit 0 + exit $? ;; --finish) mode="finish" ;; @@ -177,8 +501,23 @@ --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; + --preserve-dup-deps) duplicate_deps="yes" ;; + --quiet | --silent) show=: + preserve_args="$preserve_args $arg" + ;; + + --tag) + prevopt="--tag" + prev=tag + preserve_args="$preserve_args --tag" + ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" ;; -dlopen) @@ -189,7 +528,7 @@ -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; *) @@ -202,9 +541,21 @@ if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi +case $disable_libs in +no) + ;; +shared) + build_libtool_libs=no + build_old_libs=yes + ;; +static) + build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + ;; +esac + # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. @@ -214,8 +565,10 @@ # Infer the operation mode. if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 case $nonopt in - *cc | *++ | gcc* | *-gcc*) + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) mode=link for arg do @@ -256,7 +609,7 @@ if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. @@ -270,158 +623,127 @@ modename="$modename: compile" # Get the compilation command and the source file. base_compile= - prev= - lastarg= - srcfile="$nonopt" + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes suppress_output= + arg_mode=normal + libobj= + later= - user_target=no for arg do - case $prev in - "") ;; - xcompiler) - # Aesthetically quote the previous argument. - prev= - lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - - case $arg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - # Accept any command-line options. - case $arg in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal ;; - -static) - build_old_libs=yes + target ) + libobj="$arg" + arg_mode=normal continue ;; - -prefer-pic) - pic_mode=yes - continue - ;; + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi + arg_mode=target + continue + ;; - -prefer-non-pic) - pic_mode=no - continue - ;; + -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; - -Xcompiler) - prev=xcompiler - continue - ;; + -no-suppress) + suppress_opt=no + continue + ;; - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` - # Add the arguments to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else + # Add the arguments to base_compile. base_compile="$base_compile $lastarg" - fi - continue - ;; - esac + continue + ;; - case $user_target in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" + esac # case $arg_mode # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $lastarg in + # in scan sets, and some SunOS ksh mistreat backslash-escaping + # in scan sets (worked around with variable expansion), + # and furthermore cannot handle '|' '&' '(' ')' in scan sets + # at all, so we specify them separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done + base_compile="$base_compile $lastarg" + done # for arg - case $user_target in - set) + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE ;; *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSfmso]' + xform='[cCFSifmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; @@ -429,10 +751,13 @@ *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; + *.java) xform=java ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` @@ -441,25 +766,63 @@ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` + case $qlibobj in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qlibobj="\"$qlibobj\"" ;; + esac + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then - removelist="$obj $libobj" + removelist="$obj $lobj $libobj ${libobj}T" else - removelist="$libobj" + removelist="$lobj $libobj ${libobj}T" fi $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in @@ -467,7 +830,7 @@ pic_mode=default ;; esac - if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi @@ -478,8 +841,9 @@ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else + output_obj= need_locks=no lockfile= fi @@ -487,13 +851,13 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$0" "$lockfile" 2>/dev/null; do + until $run ln "$progpath" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then - echo "\ + $echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -505,14 +869,33 @@ compiler." $run $rm $removelist - exit 1 + exit $EXIT_FAILURE fi - echo $srcfile > "$lockfile" + $echo "$srcfile" > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi + qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` + case $qsrcfile in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qsrcfile="\"$qsrcfile\"" ;; + esac + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T </dev/null`" != x"$srcfile"; then - echo "\ + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -581,13 +949,13 @@ compiler." $run $rm $removelist - exit 1 + exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one - if test x"$output_obj" != x"$libobj"; then - $show "$mv $output_obj $libobj" - if $run $mv $output_obj $libobj; then : + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : else error=$? $run $rm $removelist @@ -595,77 +963,50 @@ fi fi - # If we have no pic_flag, then copy the object into place and finish. - if (test -z "$pic_flag" || test "$pic_mode" != default) && - test "$build_old_libs" = yes; then - # Rename the .lo from within objdir to obj - if test -f $obj; then - $show $rm $obj - $run $rm $obj - fi + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != x"$srcfile"; then - echo "\ + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -680,11 +1021,11 @@ compiler." $run $rm $removelist - exit 1 + exit $EXIT_FAILURE fi # Just move the object if needed - if test x"$output_obj" != x"$obj"; then + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else @@ -694,29 +1035,31 @@ fi fi - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? - else - # Move the .lo from within objdir - $show "$mv $libobj $lo_libobj" - if $run $mv $libobj $lo_libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE + fi + arg=$save_arg + prev= + continue + ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac if test "$prev" = rpath; then @@ -930,13 +1404,33 @@ finalize_command="$finalize_command $wl$qarg" continue ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + darwin_framework|darwin_framework_skip) + test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + prev= + continue + ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac - fi # test -n $prev + fi # test -n "$prev" prevarg="$arg" @@ -978,7 +1472,7 @@ -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" - exit 1 + exit $EXIT_FAILURE fi if test "X$arg" = "X-export-symbols"; then prev=expsyms @@ -988,11 +1482,28 @@ continue ;; + -framework|-arch|-isysroot) + case " $CC " in + *" ${arg} ${1} "* | *" ${arg} ${1} "*) + prev=darwin_framework_skip ;; + *) compiler_flags="$compiler_flags $arg" + prev=darwin_framework ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in - no/*-*-irix*) + no/*-*-irix* | /*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; @@ -1009,7 +1520,8 @@ absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit 1 + absdir="$dir" + notinst_path="$notinst_path $dir" fi dir="$absdir" ;; @@ -1023,10 +1535,15 @@ esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac ;; esac continue @@ -1035,36 +1552,98 @@ -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-pw32* | *-*-beos*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; - *-*-mingw* | *-*-os2*) + *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; - *-*-openbsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd*) - # Do not include libc_r directly, use -pthread flag. + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" continue ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac fi deplibs="$deplibs $arg" continue ;; + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + -model) + compile_command="$compile_command $arg" + compiler_flags="$compiler_flags $arg" + finalize_command="$finalize_command $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + -module) module=yes continue ;; + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m* pass through architecture-specific compiler args for GCC + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -pg pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ + -t[45]*|-txscale*|@*) + + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + -shrext) + prev=shrext + continue + ;; + -no-fast-install) fast_install=no continue @@ -1089,8 +1668,18 @@ continue ;; + -objectlist) + prev=objectlist + continue + ;; + -o) prev=output ;; + -precious-files-regex) + prev=precious_regex + continue + ;; + -release) prev=release continue @@ -1113,7 +1702,7 @@ [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac case "$xrpath " in @@ -1141,6 +1730,11 @@ prev=vinfo continue ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` @@ -1189,6 +1783,11 @@ continue ;; + -XCClinker) + prev=xcclinker + continue + ;; + # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need @@ -1201,29 +1800,106 @@ esac ;; - *.lo | *.$objext) - # A library or standard object. - if test "$prev" = dlfiles; then - # This file was specified with -dlopen. - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $arg" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi + *.$objext) + # A standard object. + objs="$objs $arg" + ;; - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` - prev= - else + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. case $arg in - *.lo) libobjs="$libobjs $arg" ;; - *) objs="$objs $arg" ;; + */* | *\\*) . $arg ;; + *) . ./$arg ;; esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi fi ;; @@ -1274,7 +1950,7 @@ if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then @@ -1283,6 +1959,7 @@ finalize_command="$finalize_command $arg" fi + oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" @@ -1303,12 +1980,12 @@ output_objdir="$output_objdir/$objdir" fi # Create the object directory. - if test ! -d $output_objdir; then + if test ! -d "$output_objdir"; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then + exit $exit_status fi fi @@ -1317,7 +1994,7 @@ "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; @@ -1325,22 +2002,52 @@ *) linkmode=prog ;; # Anything else should be a program. esac + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac specialdeplibs= + libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi libs="$libs $deplib" done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv link" @@ -1349,7 +2056,7 @@ *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac done @@ -1366,39 +2073,58 @@ ;; esac for pass in $passes; do - if test $linkmode = prog; then - # Determine which files to process + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then case $pass in - dlopen) - libs="$dlfiles" - save_deplibs="$deplibs" # Collect dlpreopened libraries - deplibs= - ;; + dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; esac fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi for deplib in $libs; do lib= found=no case $deplib in - -l*) - if test $linkmode = oldlib && test $linkmode = obj; then - $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 - continue + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" fi - if test $pass = conv; then - deplibs="$deplib $deplibs" + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - # Search the libtool library - lib="$searchdir/lib${name}.la" - if test -f "$lib"; then - found=yes - break - fi + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library @@ -1407,40 +2133,76 @@ finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi fi ;; # -l -L*) case $linkmode in lib) deplibs="$deplib $deplibs" - test $pass = conv && continue + test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) - if test $pass = conv; then + if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi - if test $pass = scan; then + if test "$pass" = scan; then deplibs="$deplib $deplibs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) - $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ;; esac # linkmode continue ;; # -L -R*) - if test $pass = link; then + if test "$pass" = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in @@ -1453,28 +2215,45 @@ ;; *.la) lib="$deplib" ;; *.$libext) - if test $pass = conv; then + if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) - if test "$deplibs_check_method" != pass_all; then - echo - echo "*** Warning: This library needs some functionality provided by $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + if eval $echo \"$deplib\" 2>/dev/null \ + | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." else - echo - echo "*** Warning: Linking the shared library $output against the" - echo "*** static library $deplib is not portable!" + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue ;; prog) - if test $pass != link; then + if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -1485,14 +2264,18 @@ esac # linkmode ;; # *.$libext *.lo | *.$objext) - if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi fi continue ;; @@ -1501,17 +2284,17 @@ continue ;; esac # case $deplib - if test $found = yes || test -f "$lib"; then : + if test "$found" = yes || test -f "$lib"; then : else - $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit 1 + $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 + exit $EXIT_FAILURE fi # Check to see that this really is a libtool archive. - if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` @@ -1524,8 +2307,11 @@ library_names= old_library= # If the library was installed with an old release of libtool, - # it will not redefine variable installed. + # it will not redefine variables installed, or shouldnotlink installed=yes + shouldnotlink=no + avoidtemprpath= + # Read the .la file case $lib in @@ -1535,19 +2321,18 @@ if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || - { test $linkmode = oldlib && test $linkmode = obj; }; then - # Add dl[pre]opened files of deplib + { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi - if test $pass = conv; then + if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" @@ -1555,18 +2340,21 @@ tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done - elif test $linkmode != prog && test $linkmode != lib; then + elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit 1 + exit $EXIT_FAILURE fi continue fi # $pass = conv + # Get the name of the library we link against. linklib= for l in $old_library $library_names; do @@ -1574,19 +2362,23 @@ done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # This library was specified with -dlopen. - if test $pass = dlopen; then + if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi - if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. - dlprefiles="$dlprefiles $lib" + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi @@ -1618,19 +2410,27 @@ dir="$libdir" absdir="$libdir" fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. - if test $pass = dlpreopen; then + if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). @@ -1646,18 +2446,19 @@ if test -z "$libdir"; then # Link the convenience library - if test $linkmode = lib; then + if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else - deplibs="$lib $deplibs" + deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi - if test $linkmode = prog && test $pass != link; then + + if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" @@ -1673,28 +2474,36 @@ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? - if test $linkalldeplibs = yes; then + if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # Link against this shared library + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $absdir" ;; + esac + fi - if test "$linkmode,$pass" = "prog,link" || - { test $linkmode = lib && test $hardcode_into_libs = yes; }; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. @@ -1716,17 +2525,6 @@ esac ;; esac - if test $linkmode = prog; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - fi fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && @@ -1736,11 +2534,56 @@ # We only need to search for static libraries continue fi + fi + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes ; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi + # This is a shared library + + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname @@ -1754,7 +2597,7 @@ elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin*) + *cygwin* | mingw*) major=`expr $current - $age` versuffix="-$major" ;; @@ -1766,17 +2609,18 @@ # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`echo $soroot | sed -e 's/^.*\///'` - newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' - eval cmds=\"$extract_expsyms_cmds\" + cmds=$extract_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -1787,9 +2631,10 @@ if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' - eval cmds=\"$old_archive_from_expsyms_cmds\" + cmds=$old_archive_from_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -1798,9 +2643,9 @@ # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib - fi # test -n $old_archive_from_expsyms_cmds + fi # test -n "$old_archive_from_expsyms_cmds" - if test $linkmode = prog || test "$mode" != relink; then + if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= @@ -1809,6 +2654,26 @@ immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | + $EGREP ": [^:]* bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; @@ -1827,6 +2692,14 @@ add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" @@ -1840,7 +2713,7 @@ if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 + exit $EXIT_FAILURE fi if test -n "$add_shlibpath"; then @@ -1849,7 +2722,7 @@ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi - if test $linkmode = prog; then + if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else @@ -1866,7 +2739,7 @@ fi fi - if test $linkmode = prog || test "$mode" = relink; then + if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= @@ -1882,13 +2755,28 @@ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi add="-l$name" fi - if test $linkmode = prog; then + if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else @@ -1896,16 +2784,7 @@ test -n "$add" && deplibs="$add $deplibs" fi fi - elif test $linkmode = prog; then - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - - # Try to link the static library + elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. @@ -1925,20 +2804,21 @@ # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - echo - echo "*** Warning: This library needs some functionality provided by $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - echo "*** Therefore, libtool will create a static module, that should work " - echo "*** as long as the dlopening application is linked with the -dlopen flag." + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -1948,17 +2828,16 @@ fi fi else - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? - if test $linkmode = lib; then + if test "$linkmode" = lib; then if test -n "$dependency_libs" && - { test $hardcode_into_libs != yes || test $build_old_libs = yes || - test $link_static = yes; }; then + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do @@ -1981,13 +2860,15 @@ tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done - if test $link_all_deplibs != no; then + if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do case $deplib in @@ -2007,38 +2888,83 @@ ;; esac if grep "^installed=no" $deplib > /dev/null; then - path="-L$absdir/$objdir" + path="$absdir/$objdir" else - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi - path="-L$absdir" + path="$absdir" fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + fi + path="" + ;; + *) + path="-L$path" + ;; + esac + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac ;; *) continue ;; esac case " $deplibs " in *" $path "*) ;; - *) deplibs="$deplibs $path" ;; + *) deplibs="$path $deplibs" ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - if test $pass = dlpreopen; then + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi - if test $pass != dlopen; then - test $pass != scan && dependency_libs="$newdependency_libs" - if test $pass != conv; then + if test "$pass" != dlopen; then + if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do @@ -2060,9 +2986,30 @@ eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) @@ -2090,19 +3037,32 @@ eval $var=\"$tmp_libs\" done # for var fi - if test "$pass" = "conv" && - { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then - libs="$deplibs" # reset libs - deplibs= - fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs done # for pass - if test $linkmode = prog; then + if test "$linkmode" = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi @@ -2116,7 +3076,7 @@ fi if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 fi if test -n "$release"; then @@ -2138,17 +3098,19 @@ case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` @@ -2159,11 +3121,11 @@ if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit 1 + exit $EXIT_FAILURE else - echo - echo "*** Warning: Linking the shared library $output against the non-libtool" - echo "*** objects $objs is not portable!" + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi @@ -2173,7 +3135,7 @@ fi set dummy $rpath - if test $# -gt 2; then + if test "$#" -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" @@ -2182,14 +3144,16 @@ if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. - libext=al + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then @@ -2205,45 +3169,87 @@ if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi - current="$2" - revision="$3" - age="$4" + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac # Check that each of the things are valid numbers. case $current in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac case $revision in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac case $age in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac - if test $age -gt $current; then + if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Calculate the version variables. @@ -2260,7 +3266,7 @@ versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ;; freebsd-aout) @@ -2273,16 +3279,21 @@ versuffix=".$current"; ;; - irix) + irix | nonstopux) major=`expr $current - $age + 1` - verstring="sgi$major.$revision" + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision - while test $loop != 0; do + while test "$loop" -ne 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` - verstring="sgi$major.$iface:$verstring" + verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. @@ -2296,13 +3307,13 @@ ;; osf) - major=`expr $current - $age` + major=.`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age - while test $loop != 0; do + while test "$loop" -ne 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" @@ -2326,20 +3337,19 @@ *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= - verstring="0.0" case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely - verstring="" + verstring= ;; *) verstring="0.0" @@ -2373,9 +3383,30 @@ fi if test "$mode" != relink; then - # Remove our outputs. - $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" - $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi fi # Now set the variables for building old libraries. @@ -2388,9 +3419,9 @@ # Eliminate all temporary directories. for path in $notinst_path; do - lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` - deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` - dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` + lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` + deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` done if test -n "$xrpath"; then @@ -2403,7 +3434,7 @@ *) finalize_rpath="$finalize_rpath $libdir" ;; esac done - if test $hardcode_into_libs != yes || test $build_old_libs = yes; then + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi @@ -2441,12 +3472,18 @@ *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; - *-*-openbsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; - *) + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) # Add libc to deplibs on all other systems if necessary. - if test $build_libtool_need_lc = "yes"; then + if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; @@ -2473,7 +3510,7 @@ # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. + # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) @@ -2486,64 +3523,88 @@ int main() { return 0; } EOF $rm conftest - $CC -o conftest conftest.c $deplibs - if test $? -eq 0 ; then + $LTCC $LTCFLAGS -o conftest conftest.c $deplibs + if test "$?" -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" + name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + if test "$name" != "" && test "$name" -ne "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which I believe you do not have" + $echo "*** because a test_compile did reveal that the linker did not use it for" + $echo "*** its dynamic dependency list that programs get resolved with at runtime." + fi fi else newdeplibs="$newdeplibs $i" fi done else - # Error occured in the first compile. Let's try to salvage the situation: - # Compile a seperate program for each library. + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then + name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then $rm conftest - $CC -o conftest conftest.c $i + $LTCC $LTCFLAGS -o conftest conftest.c $i # Did it work? - if test $? -eq 0 ; then + if test "$?" -eq 0 ; then ldd_output=`ldd conftest` - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because a test_compile did reveal that the linker did not use this one" + $echo "*** as a dynamic dependency that programs can get resolved with at runtime." + fi fi else droppeddeps=yes - echo - echo "*** Warning! Library $i is needed by this library but I was not able to" - echo "*** make it link in! You will probably need to install it or some" - echo "*** library that it depends on before this library will be fully" - echo "*** functional. Installing it before continuing would be even better." + $echo + $echo "*** Warning! Library $i is needed by this library but I was not able to" + $echo "*** make it link in! You will probably need to install it or some" + $echo "*** library that it depends on before this library will be fully" + $echo "*** functional. Installing it before continuing would be even better." fi else newdeplibs="$newdeplibs $i" @@ -2555,13 +3616,22 @@ set dummy $deplibs_check_method file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" + name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do + if test "$name" != "" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then @@ -2574,28 +3644,36 @@ # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | sed 's/.* -> //'` + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | sed 10q \ - | egrep "$file_magic_regex" > /dev/null; then + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi - done - done + done + done + fi if test -n "$a_deplib" ; then droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi fi else # Add a -L argument. @@ -2607,29 +3685,47 @@ set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" + name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - if eval echo \"$potent_lib\" 2>/dev/null \ - | sed 10q \ - | egrep "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done done - done + fi if test -n "$a_deplib" ; then droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi fi else # Add a -L argument. @@ -2639,16 +3735,23 @@ ;; none | unknown | *) newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." + $echo "*** Warning: inter-library dependencies are not supported in this platform." else - echo "*** Warning: inter-library dependencies are not known to be supported." + $echo "*** Warning: inter-library dependencies are not known to be supported." fi - echo "*** All declared inter-library dependencies are being dropped." + $echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; @@ -2668,17 +3771,17 @@ if test "$droppeddeps" = yes; then if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -2688,16 +3791,16 @@ build_libtool_libs=no fi else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test $allow_undefined = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -2712,6 +3815,35 @@ deplibs=$newdeplibs fi + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). library_names= old_library= @@ -2719,7 +3851,7 @@ # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then - if test $hardcode_into_libs = yes; then + if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= @@ -2755,7 +3887,11 @@ if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" - eval dep_rpath=\"$hardcode_libdir_flag_spec\" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. @@ -2775,6 +3911,7 @@ fi # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" @@ -2785,31 +3922,17 @@ else soname="$realname" fi - test -z "$dlname" && dlname=$soname + if test -z "$dlname"; then + dlname=$soname + fi lib="$output_objdir/$realname" + linknames= for link do linknames="$linknames $link" done - # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) in case we are running --disable-static - for obj in $libobjs; do - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - if test ! -f $xdir/$oldobj; then - $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" - $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? - fi - done - # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` @@ -2819,17 +3942,29 @@ $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" + cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? + eval cmd=\"$cmd\" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi done IFS="$save_ifs" if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi @@ -2840,43 +3975,27 @@ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" fi fi @@ -2891,23 +4010,175 @@ fi # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : else - eval cmds=\"$archive_cmds\" + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$echo "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$output_la-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadable object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~\$rm $delfiles\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || exit $? + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - exit 0 + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + fi + fi + + exit $EXIT_SUCCESS fi # Create links to the real library. @@ -2955,7 +4226,7 @@ *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 + exit $EXIT_FAILURE fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` @@ -2984,38 +4255,10 @@ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" else gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi @@ -3023,10 +4266,11 @@ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" - eval cmds=\"$reload_cmds\" + cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -3039,7 +4283,7 @@ $run ${rm}r $gentop fi - exit 0 + exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then @@ -3050,37 +4294,24 @@ # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" - eval cmds=\"$reload_cmds\" + cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" - else - # Just create a symlink. - $show $rm $libobj - $run $rm $libobj - xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$libobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - $show "(cd $xdir && $LN_S $oldobj $baseobj)" - $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi if test -n "$gentop"; then @@ -3088,12 +4319,12 @@ $run ${rm}r $gentop fi - exit 0 + exit $EXIT_SUCCESS ;; prog) case $host in - *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 @@ -3118,6 +4349,45 @@ ;; esac + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" @@ -3162,10 +4432,15 @@ fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac ;; esac done @@ -3268,31 +4543,43 @@ done if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi # Prepare the list of exported symbols if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" + export_symbols="$output_objdir/$outputname.exp" $run $rm $export_symbols - $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac else - $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | sed -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done @@ -3301,12 +4588,18 @@ test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then + if grep -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S @@ -3315,7 +4608,7 @@ if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else - echo '/* NONE */' >> "$output_objdir/$dlsyms" + $echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ @@ -3330,7 +4623,26 @@ #endif /* The mapping between symbol names and symbols. */ +" + + case $host in + *cygwin* | *mingw* ) + $echo >> "$output_objdir/$dlsyms" "\ +/* DATA imports from DLLs on WIN32 can't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs */ +struct { +" + ;; + * ) + $echo >> "$output_objdir/$dlsyms" "\ const struct { +" + ;; + esac + + + $echo >> "$output_objdir/$dlsyms" "\ const char *name; lt_ptr address; } @@ -3367,30 +4679,43 @@ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC";; + *) pic_flag_for_symtable=" $pic_flag";; esac esac # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + case $host in + *cygwin* | *mingw* ) + if test -f "$output_objdir/${outputname}.def" ; then + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + else + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + fi + ;; + * ) + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + esac ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac else @@ -3403,7 +4728,7 @@ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi - if test $need_relink = no || test "$build_libtool_libs" != yes; then + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" @@ -3411,7 +4736,7 @@ # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" - status=$? + exit_status=$? # Delete the generated files. if test -n "$dlsyms"; then @@ -3419,7 +4744,7 @@ $run $rm "$output_objdir/${outputname}S.${objext}" fi - exit $status + exit $exit_status fi if test -n "$shlibpath_var"; then @@ -3478,7 +4803,7 @@ # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? - exit 0 + exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then @@ -3528,15 +4853,15 @@ relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done - relink_command="cd `pwd`; $relink_command" + relink_command="(cd `pwd`; $relink_command)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case $0 in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else @@ -3548,15 +4873,376 @@ # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`echo $output|sed 's,.exe$,,'` ;; + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in - *cygwin*) exeext=.exe ;; + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; *) exeext= ;; esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 + case $host in + *cygwin* | *mingw* ) + output_name=`basename $output` + output_path=`dirname $output` + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + cat > $cwrappersource <> $cwrappersource<<"EOF" +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +/* -DDEBUG is fairly common in CFLAGS. */ +#undef DEBUG +#if defined DEBUGWRAPPER +# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +#else +# define DEBUG(format, ...) +#endif + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +const char * base_name (const char *name); +char * find_executable(const char *wrapper); +int check_executable(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + DEBUG("(main) argv[0] : %s\n",argv[0]); + DEBUG("(main) program_name : %s\n",program_name); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" + newargz[1] = find_executable(argv[0]); + if (newargz[1] == NULL) + lt_fatal("Couldn't find %s", argv[0]); + DEBUG("(main) found exe at : %s\n",newargz[1]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; + + for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" + return 127; +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char)name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable(const char * path) +{ + struct stat st; + + DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) && + ( + /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +#if defined (S_IXOTH) + ((st.st_mode & S_IXOTH) == S_IXOTH) || +#endif +#if defined (S_IXGRP) + ((st.st_mode & S_IXGRP) == S_IXGRP) || +#endif + ((st.st_mode & S_IXUSR) == S_IXUSR)) + ) + return 1; + else + return 0; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise */ +char * +find_executable (const char* wrapper) +{ + int has_slash = 0; + const char* p; + const char* p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char* concat_name; + + DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char* path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char* q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR(*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + return NULL; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 $echo > $output "\ #! $SHELL @@ -3572,12 +5258,12 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' +Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" @@ -3610,7 +5296,7 @@ test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` @@ -3623,7 +5309,7 @@ fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done # Try to get the absolute directory name. @@ -3632,12 +5318,12 @@ " if test "$fast_install" = yes; then - echo >> $output "\ + $echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" @@ -3648,7 +5334,7 @@ $rm \"\$progdir/\$file\" fi" - echo >> $output "\ + $echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then @@ -3656,7 +5342,7 @@ else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" - exit 1 + exit $EXIT_FAILURE fi fi @@ -3666,13 +5352,13 @@ $rm \"\$progdir/\$file\" fi" else - echo >> $output "\ + $echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi - echo >> $output "\ + $echo >> $output "\ if test -f \"\$progdir/\$program\"; then" @@ -3703,47 +5389,35 @@ # Run the actual program with our arguments. " case $host in - # win32 systems need to use the prog path for dll - # lookup to work - *-*-cygwin* | *-*-pw32*) - $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} -" - ;; - # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} + exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 + exit $EXIT_FAILURE fi else # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE fi fi\ " chmod +x $output fi - exit 0 + exit $EXIT_SUCCESS ;; esac @@ -3759,74 +5433,130 @@ oldobjs="$libobjs_save" build_libtool_libs=no else - oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + oldobjs="$old_deplibs $non_pic_objects" fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" + cmds=$old_archive_from_new_cmds else - # Ensure that we have .o objects in place in case we decided - # not to build a shared library, and have fallen back to building - # static libs even though --disable-static was passed! - for oldobj in $oldobjs; do - if test ! -f $oldobj; then - xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$oldobj"; then - xdir="." - else - xdir="$xdir" + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "copying selected object files to avoid basename conflicts..." + + if test -z "$gentop"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$gentop"; then + exit $exit_status fi - baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` - obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - $show "(cd $xdir && ${LN_S} $obj $baseobj)" - $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? fi - done + + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + counter=`expr $counter + 1` + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + $run ln "$obj" "$gentop/$newobj" || + $run cp "$obj" "$gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do + eval cmd=\"$cmd\" IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? @@ -3858,8 +5588,12 @@ fi done # Quote the link command for shipping. - relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + # Only create the output if not a dry run. if test -z "$run"; then @@ -3875,10 +5609,10 @@ case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi newdependency_libs="$newdependency_libs $libdir/$name" ;; @@ -3889,10 +5623,10 @@ newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi newdlfiles="$newdlfiles $libdir/$name" done @@ -3900,20 +5634,39 @@ newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file @@ -3942,13 +5695,16 @@ # Is this an already installed library? installed=$installed +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" - if test "$installed" = no && test $need_relink = yes; then + if test "$installed" = no && test "$need_relink" = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" fi @@ -3961,7 +5717,7 @@ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac - exit 0 + exit $EXIT_SUCCESS ;; # libtool install mode @@ -3972,11 +5728,11 @@ # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then + $echo "X$nonopt" | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -3985,14 +5741,14 @@ shift else install_prog= - arg="$nonopt" + arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -4010,28 +5766,31 @@ do if test -n "$dest"; then files="$files $dest" - dest="$arg" + dest=$arg continue fi case $arg in -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; - -*) ;; - + -*) + ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else - dest="$arg" + dest=$arg continue fi ;; @@ -4040,7 +5799,7 @@ # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac @@ -4050,13 +5809,13 @@ if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test -z "$files"; then @@ -4066,7 +5825,7 @@ $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Strip any trailing slash from the destination. @@ -4084,10 +5843,10 @@ # Not a directory, so check to see that there is only one file specified. set dummy $files - if test $# -gt 2; then + if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi fi case $destdir in @@ -4099,7 +5858,7 @@ *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac done @@ -4124,11 +5883,11 @@ *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi library_names= @@ -4159,12 +5918,33 @@ dir="$dir$objdir" if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - continue + exit $EXIT_FAILURE fi fi @@ -4186,25 +5966,38 @@ $run eval "$striplib $destdir/$realname" || exit $? fi - if test $# -gt 0; then + if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. for linkname do if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" fi done fi # Do each command in the postinstall commands. lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" + cmds=$postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || exit $? + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } done IFS="$save_ifs" fi @@ -4242,7 +6035,7 @@ *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac @@ -4260,7 +6053,7 @@ $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi - exit 0 + exit $EXIT_SUCCESS ;; *) @@ -4272,21 +6065,47 @@ destfile="$destdir/$destfile" fi + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 - exit 1 + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit $EXIT_FAILURE fi finalize=yes @@ -4308,24 +6127,22 @@ done relink_command= + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : - else - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + tmpdir=`func_mktempdir` + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` @@ -4343,14 +6160,14 @@ fi else # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another - # one anyways + # one anyway case $install_prog,$host in - /usr/bin/install*,*cygwin*) + */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok @@ -4359,7 +6176,7 @@ destfile=$destfile.exe ;; *:*.exe) - destfile=`echo $destfile | sed -e 's,.exe$,,'` + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac ;; @@ -4380,16 +6197,17 @@ $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? - if test -n "$stripme" && test -n "$striplib"; then + if test -n "$stripme" && test -n "$old_striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" + cmds=$old_postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -4403,9 +6221,9 @@ if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $0 --finish$current_libdirs' + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else - exit 0 + exit $EXIT_SUCCESS fi ;; @@ -4424,10 +6242,11 @@ for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" + cmds=$finish_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" @@ -4444,43 +6263,43 @@ fi # Exit here if they wanted silent mode. - test "$show" = ":" && exit 0 + test "$show" = : && exit $EXIT_SUCCESS - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" + $echo "X----------------------------------------------------------------------" | $Xsed + $echo "Libraries have been installed in:" for libdir in $libdirs; do - echo " $libdir" + $echo " $libdir" done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" fi if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" - echo " - use the \`$flag' linker flag" + $echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" + $echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS ;; # libtool execute mode @@ -4492,7 +6311,7 @@ if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" - exit 1 + exit $EXIT_FAILURE fi # Handle -dlopen flags immediately. @@ -4500,18 +6319,18 @@ if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi dir= case $file in *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Read the libtool library. @@ -4538,7 +6357,7 @@ dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi ;; @@ -4578,7 +6397,7 @@ -*) ;; *) # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; @@ -4601,7 +6420,7 @@ eval "export $shlibpath_var" fi - # Restore saved enviroment variables + # Restore saved environment variables if test "${save_LC_ALL+set}" = set; then LC_ALL="$save_LC_ALL"; export LC_ALL fi @@ -4610,7 +6429,7 @@ fi # Now prepare to actually exec the command. - exec_cmd='"$cmd"$args' + exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then @@ -4618,7 +6437,7 @@ $echo "export $shlibpath_var" fi $echo "$cmd$args" - exit 0 + exit $EXIT_SUCCESS fi ;; @@ -4646,24 +6465,25 @@ if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi rmdirs= + origobjdir="$objdir" for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. - objdir="$objdir" + objdir="$origobjdir" else - objdir="$dir/$objdir" + objdir="$dir/$origobjdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test $mode = uninstall && objdir="$dir" + test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates - if test $mode = clean; then + if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; @@ -4687,7 +6507,7 @@ case $name in *.la) # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. @@ -4695,18 +6515,27 @@ rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - if test $mode = uninstall; then + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" + cmds=$postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" - if test $? != 0 && test "$rmforce" != yes; then + if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done @@ -4715,40 +6544,72 @@ if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" + cmds=$old_postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" - if test $? != 0 && test "$rmforce" != yes; then + if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. - fi + ;; + esac fi ;; *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` - rmfiles="$rmfiles $dir/$oldobj" + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi fi ;; *) - # Do a test to see if this is a libtool program. - if test $mode = clean && - (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$file + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi fi fi ;; @@ -4756,6 +6617,7 @@ $show "$rm $rmfiles" $run $rm $rmfiles || exit_status=1 done + objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do @@ -4771,20 +6633,20 @@ "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd - exit 1 + exit $EXIT_FAILURE fi # We need to display help for each of the modes. @@ -4803,6 +6665,7 @@ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG --version print version information MODE must be one of the following: @@ -4816,8 +6679,10 @@ uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 +a more detailed description of MODE. + +Report bugs to ." + exit $EXIT_SUCCESS ;; clean) @@ -4928,6 +6793,9 @@ -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries @@ -4969,14 +6837,33 @@ *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac -echo +$echo $echo "Try \`$modename --help' for more information about other modes." -exit 0 +exit $? + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +disable_libs=shared +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +disable_libs=static +# ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,7 +1,7 @@ -# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*- +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -11,3542 +11,6251 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -# Do all the work for Automake. -*- Autoconf -*- +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# This macro actually does too much some checks are only needed if -# your package does certain things. But this isn't really a big deal. +# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl -# serial 8 +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL -AC_PREREQ([2.52]) -# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow -# the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl - AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_][CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_][CC], - defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_][CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_][CXX], - defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] -# Copyright 2002 Free Software Foundation, Inc. +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# Constants: +rm="rm -f" -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"]) +# Global variables: +default_ofile=libtool +can_build_shared=yes -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.6.3])]) +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" -# Helper functions for option handling. -*- Autoconf -*- +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) -# Copyright 2001, 2002 Free Software Foundation, Inc. +old_CC="$CC" +old_CFLAGS="$CFLAGS" -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi -# serial 2 +_LT_CC_BASENAME([$compiler]) -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default -# -# Check to make sure that the build environment is sane. -# +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# serial 3 +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +AC_DEFUN([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +]) - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) -# -*- Autoconf -*- +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +AC_DEFUN([_LT_COMPILER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_COMPILER_BOILERPLATE -# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +AC_DEFUN([_LT_LINKER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_LINKER_BOILERPLATE -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. -# serial 3 +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) LD="${LD-ld} -64" ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; + ]) +esac + +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $rm conftest* +]) + +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# ------------------ +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# --------------------------------------------------------------------- +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ---------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -]) +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# AM_AUX_DIR_EXPAND -# Copyright 2001 Free Software Foundation, Inc. +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + if test -z "$LTCFLAGS"; then + eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" + fi -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; -# Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50]) + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; -AC_DEFUN([AM_AUX_DIR_EXPAND], [ -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; -# Copyright 2001 Free Software Foundation, Inc. + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN -# AM_PROG_INSTALL_STRIP -# Copyright 2001 Free Software Foundation, Inc. +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 DLLs +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# AC_DISABLE_SHARED +# ----------------- +# set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED -# serial 4 -*- Autoconf -*- -# Copyright 1999, 2000, 2001 Free Software Foundation, Inc. +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_$1_dependencies_compiler_type=$depmode break fi done - - cd .. - rm -rf conftest.dir + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) else - am_cv_$1_dependencies_compiler_type=none + AC_MSG_RESULT(no) fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -]) +])# AC_PATH_TOOL_PREFIX -# AM_SET_DEPDIR +# AC_PATH_MAGIC # ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi fi -rmdir .deps 2>/dev/null -AC_SUBST([DEPDIR]) -]) +])# AC_PATH_MAGIC -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -#serial 2 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST(am__include) -AC_SUBST(am__quote) -AC_MSG_RESULT($_am_result) -rm -f confinc confmf -]) +beos*) + lt_cv_deplibs_check_method=pass_all + ;; -# AM_CONDITIONAL -*- Autoconf -*- +bsdi[[45]]*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; -# Copyright 1997, 2000, 2001 Free Software Foundation, Inc. +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump'. + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; -# serial 5 +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; -AC_PREREQ(2.52) +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional \"$1\" was never defined. -Usually this means the macro was only invoked conditionally.]) -fi])]) +interix3*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; -# isc-posix.m4 serial 2 (gettext-0.11.2) -dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. - -# This test replaces the one in autoconf. -# Currently this macro should have the same name as the autoconf macro -# because gettext's gettext.m4 (distributed in the automake package) -# still uses it. Otherwise, the use in gettext.m4 makes autoheader -# give these diagnostics: -# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX -# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX - -undefine([AC_ISC_POSIX]) - -AC_DEFUN([AC_ISC_POSIX], - [ - dnl This test replaces the obsolescent AC_ISC_POSIX kludge. - AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) - ] -) +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; -# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- +# This must be Linux ELF. +linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; -# serial 46 AC_PROG_LIBTOOL +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -]) +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([LT_AC_PROG_SED])dnl +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; -_LT_AC_PROG_ECHO_BACKSLASH -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all ;; esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Some flags need to be propagated to the compiler or linker for good -# libtool support. +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_RESTORE]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") ;; +esac +])# AC_CHECK_LIBM -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +# (note the single quotes!). If your package is not flat and you're not +# using automake, define top_builddir and top_srcdir appropriately in +# the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac - ;; + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# and an installed libltdl is not found, it is assumed to be `libltdl'. +# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and top_srcdir +# appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi ]) -esac + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE -_LT_AC_LTCONFIG_HACK -]) +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX -# AC_LIBTOOL_HEADER_ASSERT -# ------------------------ -AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], -[AC_CACHE_CHECK([whether $CC supports assert without backlinking], - [lt_cv_func_assert_works], - [case $host in - *-*-solaris*) - if test "$GCC" = yes && test "$with_gnu_ld" != yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) lt_cv_func_assert_works=no ;; - *) lt_cv_func_assert_works=yes ;; - esac - fi - ;; - esac]) -if test "x$lt_cv_func_assert_works" = xyes; then - AC_CHECK_HEADERS(assert.h) +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + +# _LT_AC_PROG_CXXCPP +# ------------------ +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP fi -])# AC_LIBTOOL_HEADER_ASSERT +])# _LT_AC_PROG_CXXCPP -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h) -])# _LT_AC_CHECK_DLFCN +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' +# AC_LIBTOOL_RC +# ------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +# Report which library types will actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no -# Handle CRLF in mingw tool chain -opt_cr= +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi ;; + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; esac +AC_MSG_RESULT([$enable_shared]) -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' -fi +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do +AC_LIBTOOL_CONFIG($1) - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + $as_unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + $as_unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' +if test "$GXX" = yes; then + # Set up default GNU C++ configuration - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif + AC_PROG_LD -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AC_FD_CC - fi - else - echo "cannot find nm_test_var in $nlist" >&AC_FD_CC - fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else - echo "$progname: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* + with_gnu_ld=no + wlarc= - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi -done -]) -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - AC_MSG_RESULT(failed) + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + else - AC_MSG_RESULT(ok) + GXX=no + with_gnu_ld=no + wlarc= fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR -# --------------------------------- -AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], -[# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi -])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. + ;; - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi - done - IFS="$save_ifs" + ;; - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' else - # maybe with a smaller string... - prev=: + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + ;; + *) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi else - # Oops. We lost completely, so just stick with echo. - echo=echo + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi - fi + ;; + esac + ;; + interix3*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc*) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC*) + # Portland Group C++ compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no fi - fi -fi -fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + openbsd2*) + # C++ shared libraries are fairly broken + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; + osf3*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[if test "$cross_compiling" = yes; then : - [$4] -else - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif + output_verbose_link_cmd='echo' -#include + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + # So that behaviour is only enabled if SCOABSPATH is set to a + # non-empty value in the environment. Most likely only useful for + # creating official distributions of packages. + # This is a hack until libtool officially supports absolute path + # names for shared libraries. + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif + case $cc_basename in + CC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -#ifdef __cplusplus -extern "C" void exit (int); -#endif +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" -void fnord() { int i=42;} -int main () +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext </dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF + done -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown + # Clean up. + rm -f a.out a.exe else - lt_cv_dlopen=no - lt_cv_dlopen_libs= + echo "libtool.m4: error: problem compiling $1 test program" +fi - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; +$rm -f confest.$objext - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; +# PORTME: override above test on systems where it is broken +ifelse([$1],[CXX], +[case $host_os in +interix3*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_AC_TAGVAR(predep_objects,$1)= + _LT_AC_TAGVAR(postdep_objects,$1)= + _LT_AC_TAGVAR(postdeps,$1)= + ;; - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) +solaris*) + case $cc_basename in + CC*) + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun' ;; esac + ;; +esac +]) - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +case " $_LT_AC_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac +])# AC_LIBTOOL_POSTDEP_PREDEP - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +# AC_LIBTOOL_LANG_F77_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) +AC_DEFUN([_LT_AC_LANG_F77_CONFIG], +[AC_REQUIRE([AC_PROG_F77]) +AC_LANG_PUSH(Fortran 77) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code=" subroutine t\n return\n end\n" + +# Code to be used in simple link tests +lt_simple_link_test_code=" program t\n end\n" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${F77-"f77"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case $host_os in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF +_LT_AC_TAGVAR(GCC, $1)="$G77" +_LT_AC_TAGVAR(LD, $1)="$LD" -AC_DEFUN([_LT_AC_LTCONFIG_HACK], -[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -# Same as above, but do not quote variable references. -double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' +AC_LIBTOOL_CONFIG($1) -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_F77_CONFIG -# Constants: -rm="rm -f" -# Global variables: -default_ofile=libtool -can_build_shared=yes +# AC_LIBTOOL_LANG_GCJ_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) +AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], +[AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds + +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_GCJ_CONFIG + + +# AC_LIBTOOL_LANG_RC_CONFIG +# ------------------------- +# Ensure that the configuration vars for the Windows resource compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) +AC_DEFUN([_LT_AC_LANG_RC_CONFIG], +[AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE -old_CC="$CC" -old_CFLAGS="$CFLAGS" +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o +AC_LIBTOOL_CONFIG($1) -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_RC_CONFIG -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES +# AC_LIBTOOL_CONFIG([TAGNAME]) +# ---------------------------- +# If TAGNAME is not passed, then create an initial libtool script +# with a default configuration from the untagged config vars. Otherwise +# add code to config.status for appending the configuration named by +# TAGNAME from the matching tagged config vars. +AC_DEFUN([AC_LIBTOOL_CONFIG], +[# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST fi - ;; -esac + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + _LT_AC_TAGVAR(compiler, $1) \ + _LT_AC_TAGVAR(CC, $1) \ + _LT_AC_TAGVAR(LD, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ + _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ + _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ + _LT_AC_TAGVAR(old_archive_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ + _LT_AC_TAGVAR(predep_objects, $1) \ + _LT_AC_TAGVAR(postdep_objects, $1) \ + _LT_AC_TAGVAR(predeps, $1) \ + _LT_AC_TAGVAR(postdeps, $1) \ + _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ + _LT_AC_TAGVAR(archive_cmds, $1) \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ + _LT_AC_TAGVAR(postinstall_cmds, $1) \ + _LT_AC_TAGVAR(postuninstall_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ + _LT_AC_TAGVAR(allow_undefined_flag, $1) \ + _LT_AC_TAGVAR(no_undefined_flag, $1) \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ + _LT_AC_TAGVAR(hardcode_automatic, $1) \ + _LT_AC_TAGVAR(module_cmds, $1) \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) \ + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ + _LT_AC_TAGVAR(exclude_expsyms, $1) \ + _LT_AC_TAGVAR(include_expsyms, $1); do -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= + case $var in + _LT_AC_TAGVAR(old_archive_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ + _LT_AC_TAGVAR(archive_cmds, $1) | \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(module_cmds, $1) | \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + case $lt_echo in + *'\[$]0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` ;; esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" +ifelse([$1], [], + [cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + AC_MSG_NOTICE([creating $ofile])], + [cfgfile="$ofile"]) + + cat <<__EOF__ >> "$cfgfile" +ifelse([$1], [], +[#! $SHELL -AC_MSG_CHECKING([for objdir]) -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -AC_MSG_RESULT($objdir) +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. +# A sed program that does not truncate output. +SED=$lt_SED -AC_ARG_WITH(pic, -[ --with-pic try to use only PIC/non-PIC objects [default=use both]], -pic_mode="$withval", pic_mode=default) -test -z "$pic_mode" && pic_mode=default +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e 1s/^X//" -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -AC_MSG_CHECKING([for $compiler option to produce PIC]) -AC_CACHE_VAL(lt_cv_prog_cc_pic, -[ lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' +# The names of the tagged configurations supported by this script. +available_tags= - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - irix5* | irix6* | nonstopux*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; +# Whether or not to build static libraries. +build_old_libs=$enable_static - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; +# An echo program that does not interpret backslashes. +echo=$lt_echo - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi -]) -if test -z "$lt_cv_prog_cc_pic"; then - AC_MSG_RESULT([none]) -else - AC_MSG_RESULT([$lt_cv_prog_cc_pic]) +# A C compiler. +LTCC=$lt_LTCC - # Check to make sure the pic_flag actually works. - AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) - AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - AC_TRY_COMPILE([], [], [dnl - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - ], [dnl - lt_cv_prog_cc_pic_works=no - ]) - CFLAGS="$save_CFLAGS" - ]) +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) -fi +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) - lt_cv_prog_cc_can_build_shared=no - fi -fi +# An ERE matcher. +EGREP=$lt_EGREP -AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) -AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) - LDFLAGS="$save_LDFLAGS" -]) +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) -AC_CACHE_VAL([lt_cv_compiler_c_o], [ -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&AC_FD_CC - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null -]) -compiler_c_o=$lt_cv_compiler_c_o -AC_MSG_RESULT([$compiler_c_o]) +# Whether we need hard or soft links. +LN_S=$lt_LN_S -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) - AC_CACHE_VAL([lt_cv_compiler_o_lo], [ - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - ]) - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - ]) - compiler_o_lo=$lt_cv_compiler_o_lo - AC_MSG_RESULT([$compiler_o_lo]) -else - compiler_o_lo=no -fi +# A BSD-compatible nm program. +NM=$lt_NM -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi +# A symbol stripping program +STRIP=$lt_STRIP -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - ]) - CFLAGS="$save_CFLAGS" - AC_MSG_RESULT([$compiler_rtti_exceptions]) +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" -# See if the linker supports building shared libraries. -AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= +# Used on cygwin: assembler. +AS="$AS" -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac +# The name of the directory that contains temporary libtool files. +objdir=$objdir -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. +# Object file suffix (normally "o"). +objext="$ac_objext" -EOF - ;; +# Old archive suffix (normally "a"). +libext="$libext" - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; +# Executable file suffix (normally ""). +exeext="$exeext" - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - 4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; +# Whether dlopen is supported. +dlopen_support=$enable_dlopen - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no +# Library versioning type. +version_type=$version_type - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - esac +# Format of library name prefix. +libname_spec=$lt_libname_spec - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' - fi - fi - ;; +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; +# This is the shared library runtime path variable. +runpath_var=$runpath_var - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) - cat <&2 +# This is the shared library path variable. +shlibpath_var=$shlibpath_var -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) - *) - ld_shlibs=no - ;; - esac -fi -AC_MSG_RESULT([$ld_shlibs]) -test "$ld_shlibs" = no && can_build_shared=no +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" -# Check hardcoding attributes. -AC_MSG_CHECKING([how to hardcode library paths into programs]) -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -AC_MSG_RESULT([$hardcode_action]) +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" -# PORTME Fill in your ld.so characteristics -AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - hardcode_into_libs=yes - ;; +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; +__EOF__ -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF ;; esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) -freebsd1*) - dynamic_linker=no - ;; + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi +])# AC_LIBTOOL_CONFIG -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - # Find out which ABI we are using (multilib Linux x86_64 hack). - libsuff= - case "$host_cpu" in - x86_64*|s390x*) - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - ;; - esac - fi - rm -rf conftest* - ;; - *) - ;; - esac - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH +linux* | k*bsd*-gnu) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - hardcode_into_libs=yes +irix* | nonstopux*) + symcode='[[BCDEGRST]]' ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH +osf*) + symcode='[[BCDEGQRST]]' ;; - solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' + symcode='[[BDRT]]' ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes +sco3.2v5*) + symcode='[[DT]]' ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac +sysv4.2uw2*) + symcode='[[DT]]' ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH +sysv4) + symcode='[[DFNSTU]]' ;; +esac -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; +esac -*) - dynamic_linker=no - ;; +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no -# Report the final consequences. -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) + # Check to see that the pipe works correctly. + pipe_works=no -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif -AC_LIBTOOL_DLOPEN_SELF +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], - [$rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile); then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_archive_cmds_need_lc=no +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi else - lt_cv_archive_cmds_need_lc=yes + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi - allow_undefined_flag=$save_allow_undefined_flag else - cat conftest.err 1>&5 - fi]) - AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) - ;; - esac + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" + AC_MSG_RESULT(ok) fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - echo creating $ofile +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS SED \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac ;; *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="${SED} -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc* | ecpc*) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC*) + # Portland Group C++ compiler. + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' -# Whether or not to build static libraries. -build_old_libs=$enable_static + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; -# The host system. -host_alias=$host_alias -host=$host + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; -# An echo program that does not interpret backslashes. -echo=$lt_echo + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; -# The default C compiler. -CC=$lt_CC + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; -# Is the compiler the GNU C compiler? -with_gcc=$GCC + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; -# The linker used to build libraries. -LD=$lt_LD + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; -# Whether we need hard or soft links. -LN_S=$lt_LN_S + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; -# A BSD-compatible nm program. -NM=$lt_NM + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; -# A symbol stripping program -STRIP=$STRIP + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" + linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; -# Used on cygwin: assembler. -AS="$AS" + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; -# The name of the directory that contains temporary libtool files. -objdir=$objdir + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# How to pass a linker flag through the compiler. -wl=$lt_wl + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Object file suffix (normally "o"). -objext="$ac_objext" + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; -# Old archive suffix (normally "a"). -libext="$libext" + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Executable file suffix (normally ""). -exeext="$exeext" + unicos*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks +# +# Check to make sure the static flag actually works. +# +wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) +]) -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix -# Do we need a version for libraries? -need_version=$need_version +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + linux* | k*bsd*-gnu) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + _LT_CC_BASENAME([$compiler]) + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac -# Whether dlopen is supported. -dlopen_support=$enable_dlopen + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag +EOF + fi + ;; -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec + interix3*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -# Library versioning type. -version_type=$version_type + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Format of library name prefix. -libname_spec=$lt_libname_spec + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + bsdi[[45]]*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; -# This is the shared library runtime path variable. -runpath_var=$runpath_var + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; -# This is the shared library path variable. -shlibpath_var=$shlibpath_var + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; -# ### END LIBTOOL CONFIG + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -__EOF__ + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include @@ -3580,925 +6289,943 @@ # return TRUE; # } # /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) -])# _LT_AC_LTCONFIG_HACK -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) ]) -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed fi done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) ]) -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) +# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.6])]) -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` ]) -# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 7 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + -# AC_LIBTOOL_PICMODE - implement the --with-pic flag -# Usage: AC_LIBTOOL_PICMODE[(MODE)] -# Where MODE is either `yes' or `no'. If omitted, it defaults to -# `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default)]) +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) -# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf -EOF - fi ;; - esac + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break fi - break fi done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) + + cd .. + rm -rf conftest.dir else - AC_MSG_RESULT(no) + am_cv_$1_dependencies_compiler_type=none fi ]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) -# AC_PATH_MAGIC - find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl -AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) - else - MAGIC_CMD=: - fi -fi +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | [[A-Za-z]]:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) ]) -# AC_PROG_LD_GNU - -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -]) +# Generate code to set up dependency tracking. -*- Autoconf -*- -# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, -[lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) -# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependent libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) -beos*) - lt_cv_deplibs_check_method=pass_all - ;; +# Do all the work for Automake. -*- Autoconf -*- -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; +# serial 12 -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' else - lt_cv_deplibs_check_method=pass_all + CYGPATH_W=echo fi - ;; +fi +AC_SUBST([CYGPATH_W]) -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | s390* | x86_64*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; +# serial 2 -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; +# Check to see how 'make' treats includes. -*- Autoconf -*- -sysv5uw[[78]]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf ]) +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi ]) -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and LTDLINCL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and LTDLINCL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -]) +# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and LTDLINCL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +# +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= + mkdir_p='$(install_sh) -d' fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -]) +fi +AC_SUBST([mkdir_p])]) -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) +# Helper functions for option handling. -*- Autoconf -*- -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_executable_p="test -f" -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext" - fi - done - done -done +# serial 3 - # Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) -# Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} -{ - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 40000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" -]) -if test "X$SED" != "X"; then - lt_cv_path_SED=$SED -else - SED=$lt_cv_path_SED -fi -AC_MSG_RESULT([$SED]) -]) +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) -# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +# Check to make sure that the build environment is sane. -*- Autoconf -*- -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi -AC_PREREQ([2.52]) + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) -# serial 6 +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. We must strip everything past the first ":", -# and everything past the last "/". +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# _AM_DIRNAME(PATH) -# ----------------- -# Like AS_DIRNAME, only do it during macro expansion -AC_DEFUN([_AM_DIRNAME], - [m4_if(regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, - m4_if(regexp([$1], [^//\([^/]\|$\)]), -1, - m4_if(regexp([$1], [^/.*]), -1, - [.], - patsubst([$1], [^\(/\).*], [\1])), - patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), - patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl -])# _AM_DIRNAME - - -# The stamp files are numbered to have different names. -# We could number them on a directory basis, but that's additional -# complications, let's have a unique counter. -m4_define([_AM_STAMP_Count], [0]) +# Check how to create a tarball. -*- Autoconf -*- +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# _AM_STAMP(HEADER) -# ----------------- -# The name of the stamp file for HEADER. -AC_DEFUN([_AM_STAMP], -[m4_define([_AM_STAMP_Count], m4_incr(_AM_STAMP_Count))dnl -AS_ESCAPE(_AM_DIRNAME(patsubst([$1], - [:.*])))/stamp-h[]_AM_STAMP_Count]) +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break -# _AM_CONFIG_HEADER(HEADER[:SOURCES], COMMANDS, INIT-COMMANDS) -# ------------------------------------------------------------ -# We used to try to get a real timestamp in stamp-h. But the fear is that -# that will cause unnecessary cvs conflicts. -AC_DEFUN([_AM_CONFIG_HEADER], -[# Add the stamp file to the list of files AC keeps track of, -# along with our hook. -AC_CONFIG_HEADERS([$1], - [# update the timestamp -echo 'timestamp for $1' >"_AM_STAMP([$1])" -$2], - [$3]) -])# _AM_CONFIG_HEADER - - -# AM_CONFIG_HEADER(HEADER[:SOURCES]..., COMMANDS, INIT-COMMANDS) -# -------------------------------------------------------------- -AC_DEFUN([AM_CONFIG_HEADER], -[AC_FOREACH([_AM_File], [$1], [_AM_CONFIG_HEADER(_AM_File, [$2], [$3])]) -])# AM_CONFIG_HEADER + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR debian/compat0000644000000000000000000000000211656261350010371 0ustar 8 debian/changelog0000644000000000000000000001317411656265064011061 0ustar cdck (0.7.0-5) unstable; urgency=low * Add patch hurd.patch to fix build failure on hurd-i386; thanks to Samuel Thibault for the bug report and the patch (closes: #647969). * debian/copyright: update years of packaging copyright. * Use debhelper (compat level) 8, switch order of arguments in debian/rules. * Set Standards-Version to 3.9.2 (no changes). -- gregor herrmann Tue, 08 Nov 2011 18:43:07 +0100 cdck (0.7.0-4) unstable; urgency=low * debian/control: fix typo in long description, thanks to Martin Eberhard Schauer for the bug report (closes: #575643). * "export CONFIG_SHELL=/bin/bash" in debian/rules to avoid problems with dash and configure/libtool (closes: #583028). * Add more files to debian/clean that are (re-)generated during build. * Convert to source format 3.0 (quilt). Remove quilt framework. Removed now unused lintian override. * Use the autotools_dev debhelper addon in debian/rules; bump build dependency on autotools-dev in debian/control. * Set Standards-Version to 3.8.4 (no changes). * Add trailing blank line to debian/NEWS. * debian/copyright: update formatting (DEP5) and years of packaging copyright. * Update patch headers (DEP3). -- gregor herrmann Tue, 25 May 2010 20:27:33 +0200 cdck (0.7.0-3) unstable; urgency=low * Patches: - man.patch: + refresh with modern .quiltrc settings + add header + remove =cut at the top which leads to pod2man errors + add a note about how to use the gnuplot datafile (LP: #476591) - wording.patch: + refresh + add header - libtool.patch: + new patch to split out changes to aclocal.m4 and ltmain.sh + add a lintian override for the warning about the ancient ltmain.sh in the source package * debian/rules: call make with -j1, the upstream build system is not parallel-build safe. * Set Standards-Version to 3.8.3, add debian/README.source to document quilt usage. * Switch to debhelper 7, adjust debian/rules and versioned dependencies in debian/control. * debian/control: make short description a noun phrase. * debian/copyright: update years of packaging copyright. -- gregor herrmann Fri, 06 Nov 2009 21:54:11 +0100 cdck (0.7.0-2) unstable; urgency=low * debian/rules: remove config.{sub,guess} in clean target and copy them over in configure target as a preparation for source format "3.0 (quilt)"; thanks to Raphaël Hertzog for the bug report (closes: #482726). * debian/control: change my email address. * Convert debian/changelog to UTF-8. * debian/copyright: replace "GPL2+" with "GPL-2+"; add copyright for packaging. -- gregor herrmann Sat, 24 May 2008 21:23:13 +0200 cdck (0.7.0-1) unstable; urgency=low * New upstream release: adds a warning about misleading error output (closes: #438631). * Set Standard-Version to 3.7.3 (no changes required). * Set debhelper compatibility level to 6. * Remove debian/dirs, not needed. * Add NEWS.Debian to inform users about the new default behaviour. * Add patch man.patch to fix manpage name and section; add quilt framework. * Add patch wording.patch, slightly improves the program's output, thanks to DenverD. * debian/rules: - split CFLAGS and LDFLAGS in call to ./configure - don't ignore errors of $(MAKE) distclean - add install-stamp target to debian/rules and re-arrange target dependencies - clean up * debian/copyright: - change to the new machine-readable format - update years of copyright * debian/control: - move upstream URL from the description to the new Homepage field - change XS-Vcs-* fields to Vcs-* -- gregor herrmann Wed, 05 Mar 2008 17:41:39 +0100 cdck (0.6.0-1) unstable; urgency=low * New upstream release (includes the Debian patch from 0.5.2-3). -- gregor herrmann Thu, 14 Dec 2006 18:39:17 +0100 cdck (0.5.2-3) unstable; urgency=medium * apply signed char patch for arm, powerpc, and s390 (closes: #402079) (thanks to Niko Tyni for supplying the patch) * upload urgency set to medium due to bug severity on these arches -- tony mancill Thu, 7 Dec 2006 21:26:36 -0800 cdck (0.5.2-2) unstable; urgency=low * Added Tony Mancill to Uploaders. * Updated ltmain.sh and aclocal.m4 (closes: #375634). -- gregor herrmann Tue, 27 Jun 2006 20:08:41 +0200 cdck (0.5.2-1) unstable; urgency=low * New upstream release. * Clarified copyright/license of included parts. * Fixed watch file. * Initial release to the Debian archive (closes: #366554). -- gregor herrmann Tue, 9 May 2006 18:27:53 +0200 cdck (0.5.1+0.5.2rc1-1) unstable; urgency=low * New upstream release. * Removed manpage from debian/ (now included in upstream tarball). * Update to Standards-Version: 3.7.2 (no changes required). * Reverted changes of output of `cdck -h` (fixes included upstream). -- gregor herrmann Mon, 8 May 2006 16:44:59 +0200 cdck (0.5.1-3) unstable; urgency=low * Update to Standards-Version: 3.7.0 (no changes required). -- gregor herrmann Mon, 1 May 2006 14:26:25 +0200 cdck (0.5.1-2) unstable; urgency=low * Changed the output of `cdck -h` and the manpage to better suit the reality. -- gregor herrmann Fri, 21 Apr 2006 19:57:15 +0200 cdck (0.5.1-1) unstable; urgency=low * Initial release. -- gregor herrmann Mon, 17 Apr 2006 16:35:19 +0200 debian/NEWS0000644000000000000000000000040411377011056007664 0ustar cdck (0.7.0-1) unstable; urgency=low The new default mode action is now "-i" (print CD/DVD information and quit), if you want to perform timing tests pass "-t" to cdck. -- gregor herrmann Wed, 05 Mar 2008 16:57:42 +0100 debian/source/0000755000000000000000000000000011656265073010501 5ustar debian/source/format0000644000000000000000000000001411377007715011704 0ustar 3.0 (quilt) debian/rules0000755000000000000000000000036411656265000010252 0ustar #!/usr/bin/make -f export CONFIG_SHELL=/bin/bash %: dh $@ --with autotools_dev override_dh_auto_build: dh_auto_build -- -j1 override_dh_auto_install: dh_auto_install -- DESTDIR=$(CURDIR)/debian/cdck rm -rf $(CURDIR)/debian/cdck/usr/lib