cstream-3.0.0/0000755040216600116100000000000011572667154010171 500000000000000cstream-3.0.0/README0000644040216600116100000000341006720604754010763 00000000000000 cstream is a general-purpose stream-handling tool like UNIX' dd, usually used in commandline-constructed pipes. Featues: Sane commandline switch syntax. Exact throughput limiting, on the incoming side. Timing variance in previous reads are counterbalanced in the following reads. Precise throughput reporting. Either at the end of the transmission or everytime SIGUSR1 is received. Quite useful to ask lengthy opertions how much data has been transferred yet, i.e. when writing tapes. Reports are done in bytes/sec and if appropriate in KB/sec or MB/sec, where 1K = 1024. SIGUSR2 causes a clean shutdown before EOF on input, timing informating is displayed. Build-in support to write its PID to a file, for painless sending of these signals. Build-in support for fifos. Example usage is a 'pseudo-device', something that sinks or delivers data at an appropriate rate, but looks like a file, i.e. if you test soundcard software. See the manpage for examples. Built-in data creation and sink, no more redirection of /dev/null and /dev/zero. These special devices speed varies greatly amoung operating systems, redirecting from it isn't appropriate benchmarking and a waste of resources anyway. Accepts 'k', 'm' and 'g' character after number for "kilo, mega, giga" bytes for overall data size limit. "gcc -Wall" clean source code, serious effort taken to avoid undefined behaviour in ANSI C or POSIX, except long long is required. Limiting and reporting works on data amounts > 4 GB. cstream was written by Martin Cracauer in 1998. For updates and more in- formation see http://www.cons.org/cracauer/cstream.html cstream-3.0.0/configure.in0000644040216600116100000000345411572434147012422 00000000000000dnl Process this file with autoconf to produce a configure script. AC_INIT(cstream.c) AC_CONFIG_AUX_DIR(auxdir) AM_INIT_AUTOMAKE(cstream, 3.0.0) dnl Checks for programs. AC_PROG_AWK AC_PROG_CC AC_PROG_INSTALL AC_PROG_LN_S dnl Checks for libraries. AC_CHECK_LIB(m, sin) AC_CHECK_LIB(ossaudio, _oss_ioctl) dnl Checks for header files. AC_HEADER_STDC AC_HEADER_SYS_WAIT AC_CHECK_HEADERS(fcntl.h sys/time.h unistd.h poll.h machine/soundcard.h linux/soundcard.h sys/soundcard.h sys/uio.h sys/socket.h netinet/in.h arpa/inet.h netdb.h winsock2.h sys/statvfs.h) dnl Checks for typedefs, structures, and compiler characteristics. AC_C_CONST AC_HEADER_TIME AC_TRY_COMPILE([#include ] [#include ], socklen_t len, cat >> confdefs.h <<\EOF #define HAVE_SOCKLEN_T 1 EOF ) AC_TRY_COMPILE([#include ] [#include ], struct sigaction sa, cat >> confdefs.h <<\EOF #define HAVE_STRUCT_SIGACTION 1 EOF ) AC_TRY_COMPILE([#include ] [#include ], struct itimerval itv, cat >> confdefs.h <<\EOF #define HAVE_STRUCT_ITIMERVAL 1 EOF ) AC_TRY_COMPILE(#define _GNU_SOURCE [#include ] [#include ] [#include ], open("/tmp/l", O_DIRECT, O_RDONLY), cat >> confdefs.h <<\EOF #define HAVE_O_DIRECT 1 EOF ) AC_ARG_ENABLE(notcp, --enable-notcp leave out TCP/IP socket support, cat >> confdefs.h <<\EOF #define NOTCP 1 EOF ) AC_ARG_ENABLE(nosound, --enable-nosound leave out sound support, cat >> confdefs.h <<\EOF #define NOSOUND 1 EOF ) AC_ARG_ENABLE(noresolv, --enable-noresolv leave out resolver support, cat >> confdefs.h <<\EOF #define NORESOLV 1 EOF ) dnl Checks for library functions. AC_TYPE_SIGNAL AC_CHECK_FUNCS(gettimeofday mkfifo strdup getnameinfo getaddrinfo) AC_OUTPUT(tests/Makefile auxdir/Makefile Makefile) cstream-3.0.0/aclocal.m40000644040216600116100000010346311572477703011757 00000000000000# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, [m4_warning([this file was generated for autoconf 2.65. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl dnl The `parallel-tests' driver may need to know about EXEEXT, so add the dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR cstream-3.0.0/Makefile.am0000644040216600116100000000040507236041725012134 00000000000000AUTOMAKE_OPTIONS = foreign bin_PROGRAMS = cstream cstream_SOURCES = cstream.c man_MANS = cstream.1 EXTRA_DIST = TODO README CHANGES COPYRIGHT INSTALLATION cstream.1 SUBDIRS = auxdir tests # Don't work anymore, output changed #TESTS = tests/test1.sh cstream-3.0.0/Makefile.in0000644040216600116100000006656711572666731012202 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : bin_PROGRAMS = cstream$(EXEEXT) subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/configure TODO ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/auxdir/mkinstalldirs CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" PROGRAMS = $(bin_PROGRAMS) am_cstream_OBJECTS = cstream.$(OBJEXT) cstream_OBJECTS = $(am_cstream_OBJECTS) cstream_LDADD = $(LDADD) DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/auxdir/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(cstream_SOURCES) DIST_SOURCES = $(cstream_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man_MANS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = foreign cstream_SOURCES = cstream.c man_MANS = cstream.1 EXTRA_DIST = TODO README CHANGES COPYRIGHT INSTALLATION cstream.1 SUBDIRS = auxdir tests all: all-recursive .SUFFIXES: .SUFFIXES: .c .o .obj am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) cstream$(EXEEXT): $(cstream_OBJECTS) $(cstream_DEPENDENCIES) @rm -f cstream$(EXEEXT) $(LINK) $(cstream_OBJECTS) $(cstream_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cstream.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` install-man1: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list=''; test -n "$(man1dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) $(MANS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-man install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-man1 install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-man uninstall-man: uninstall-man1 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-binPROGRAMS \ clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-compile distclean-generic \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-binPROGRAMS install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-binPROGRAMS uninstall-man \ uninstall-man1 # Don't work anymore, output changed #TESTS = tests/test1.sh # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: cstream-3.0.0/configure0000755040216600116100000050616111572666733012033 00000000000000#! /bin/sh if [ ! $CFLAGS ] ; then CFLAGS="-g -O" fi #! /bin/sh if [ ! $CFLAGS ] ; then CFLAGS="-g -O" fi #! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.65. # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, $0: including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME= PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= PACKAGE_URL= ac_unique_file="cstream.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS EGREP GREP CPP LN_S am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_dependency_tracking enable_notcp enable_nosound enable_noresolv ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error "unrecognized option: \`$ac_option' Try \`$0 --help' for more information." ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-notcp leave out TCP/IP socket support --enable-nosound leave out sound support --enable-noresolv leave out resolver support Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to the package provider. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF configure generated by GNU Autoconf 2.65 Copyright (C) 2009 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_mongrel # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_compile # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_func cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was generated by GNU Autoconf 2.65. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in auxdir "$srcdir"/auxdir; do for ac_t in install-sh install.sh shtool; do if test -f "$ac_dir/$ac_t"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/$ac_t -c" break 2 fi done done if test -z "$ac_aux_dir"; then as_fn_error "cannot find install-sh, install.sh, or shtool in auxdir \"$srcdir\"/auxdir" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. am__api_version='1.11' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file ) then # Ok. : else as_fn_error "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=cstream VERSION=3.0.0 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "no acceptable C compiler found in \$PATH See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { as_fn_set_status 77 as_fn_error "C compiler cannot create executables See \`config.log' for more details." "$LINENO" 5; }; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of object files: cannot compile See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sin in -lm" >&5 $as_echo_n "checking for sin in -lm... " >&6; } if test "${ac_cv_lib_m_sin+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char sin (); int main () { return sin (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_m_sin=yes else ac_cv_lib_m_sin=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_sin" >&5 $as_echo "$ac_cv_lib_m_sin" >&6; } if test "x$ac_cv_lib_m_sin" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBM 1 _ACEOF LIBS="-lm $LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _oss_ioctl in -lossaudio" >&5 $as_echo_n "checking for _oss_ioctl in -lossaudio... " >&6; } if test "${ac_cv_lib_ossaudio__oss_ioctl+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lossaudio $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char _oss_ioctl (); int main () { return _oss_ioctl (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_ossaudio__oss_ioctl=yes else ac_cv_lib_ossaudio__oss_ioctl=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ossaudio__oss_ioctl" >&5 $as_echo "$ac_cv_lib_ossaudio__oss_ioctl" >&6; } if test "x$ac_cv_lib_ossaudio__oss_ioctl" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBOSSAUDIO 1 _ACEOF LIBS="-lossaudio $LIBS" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5 $as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } if test "${ac_cv_header_sys_wait_h+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif int main () { int s; wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_sys_wait_h=yes else ac_cv_header_sys_wait_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5 $as_echo "$ac_cv_header_sys_wait_h" >&6; } if test $ac_cv_header_sys_wait_h = yes; then $as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " eval as_val=\$$as_ac_Header if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in fcntl.h sys/time.h unistd.h poll.h machine/soundcard.h linux/soundcard.h sys/soundcard.h sys/uio.h sys/socket.h netinet/in.h arpa/inet.h netdb.h winsock2.h sys/statvfs.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" eval as_val=\$$as_ac_Header if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if test "${ac_cv_c_const+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset cs; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then $as_echo "#define const /**/" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 $as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } if test "${ac_cv_header_time+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include int main () { if ((struct tm *) 0) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_time=yes else ac_cv_header_time=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 $as_echo "$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then $as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h fi cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { socklen_t len ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat >> confdefs.h <<\EOF #define HAVE_SOCKLEN_T 1 EOF fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { struct sigaction sa ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat >> confdefs.h <<\EOF #define HAVE_STRUCT_SIGACTION 1 EOF fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { struct itimerval itv ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat >> confdefs.h <<\EOF #define HAVE_STRUCT_ITIMERVAL 1 EOF fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define _GNU_SOURCE #include #include #include int main () { open("/tmp/l", O_DIRECT, O_RDONLY) ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat >> confdefs.h <<\EOF #define HAVE_O_DIRECT 1 EOF fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext # Check whether --enable-notcp was given. if test "${enable_notcp+set}" = set; then : enableval=$enable_notcp; cat >> confdefs.h <<\EOF #define NOTCP 1 EOF fi # Check whether --enable-nosound was given. if test "${enable_nosound+set}" = set; then : enableval=$enable_nosound; cat >> confdefs.h <<\EOF #define NOSOUND 1 EOF fi # Check whether --enable-noresolv was given. if test "${enable_noresolv+set}" = set; then : enableval=$enable_noresolv; cat >> confdefs.h <<\EOF #define NORESOLV 1 EOF fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5 $as_echo_n "checking return type of signal handlers... " >&6; } if test "${ac_cv_type_signal+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { return *(signal (0, 0)) (0) == 1; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_type_signal=int else ac_cv_type_signal=void fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5 $as_echo "$ac_cv_type_signal" >&6; } cat >>confdefs.h <<_ACEOF #define RETSIGTYPE $ac_cv_type_signal _ACEOF for ac_func in gettimeofday mkfifo strdup getnameinfo getaddrinfo do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" eval as_val=\$$as_ac_var if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done ac_config_files="$ac_config_files tests/Makefile auxdir/Makefile Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that # take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. ac_script=' :mline /\\$/{ N s,\\\n,, b mline } t clear :clear s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote b any :quote s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g s/\[/\\&/g s/\]/\\&/g s/\$/$$/g H :any ${ g s/^\n// s/\n/ /g p } ' DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by $as_me, which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE Configuration files: $config_files Configuration commands: $config_commands Report bugs to the package provider." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ config.status configured by $0, generated by GNU Autoconf 2.65, with options \\"\$ac_cs_config\\" Copyright (C) 2009 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --he | --h | --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; "auxdir/Makefile") CONFIG_FILES="$CONFIG_FILES auxdir/Makefile" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || as_fn_error "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || as_fn_error "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit $? fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi cstream-3.0.0/TODO0000644040216600116100000000454311572446440010600 00000000000000hostname lookup for ipv4 doesn't do the right thing. // FIXME ==> do the loop thing for getaddrinfo specifying a ipv4 address gets me no socket at all now // FIXED specifying a ipv6 address doesn't work? // FIXED %% TCP mode: - :port bind to local port and await connection - hostname:port connect to remote machine/port - hostname:port:hostname:port connect to remote machine/port 192.168.175.48 = 816818368 audio mode option parsing TCP/IP socket functionality: - good ifdef's to get rid of it - good ifdef's to get rid of hostname resolution - specification for local binding - Manpage - usage() nicht gegen -k linken wenn audio support nicht drin zlib: - z negative compressionlevel = bzip2 compressionlevel = - decompress (bzip2 auto-detection) %% Current mode durrently doesn't speed up, I probably overlooked some obvious synchronization. "Since first transfer" should also exclude the last write (or at least the close, important on tapes). Support -B option to set blocksize for writes, if not already set by -b, which will continue to set both unless -B has been used before. In concurrent mode, who is going to report what? Parent is easier handling-wise, but it cannot report output throughput without having an upward pipe. But we may need such a pipe soon anyway. Don't use the required blocksize for the pipe in concurrent mode. This can easily be done if read and write block size are specified seperately and then just set obs in the parent and ibs in the child to a useful value (maybe even to be specified by the user, cause it's a space vs. number of syscalls tradeoff). Throughput report not only as 'since program started', but also as 'since first read/write succeeded' (also subsctract the amount of data this syscall took) and 'only take time spent on incoming or outgoing side into account'. poll/select: - poll nur auf lesefd - danach haben wir einen (teil-)block 1) wenn im puffer noch platz fuer einen block, dann poll auf beide fd wenn nicht, dann poll nur auf schreibfd - wenn wir lesefd zurueckkriegen, dann puffer um diesen Block erweitern - wenn wir schreibfd zurueckkriegen, dann den pointer im buffer erhoehen, um das was wir weggeschrieben haben. - wenn kein Platz mehr zum lesen, dann leerschreiben. Wenn leergeschrieben und kein platz mehr zum lesen, dann reset von curread und curwrite Manpage: -S -c 4 -w cstream-3.0.0/cstream.c0000644040216600116100000012450711572503103011703 00000000000000/* * Copyright 1998, 1999, 2000, 2001 Martin Cracauer * * See the file COPYRIGHT in the distribution package for copying terms. */ #ifndef HAVE_STRUCT_ITIMERVAL #error no itimerval #define NOTIMER #endif #define WITH_RESOLV /* * Control glibc, especially to get 64 bit file offsets */ #ifdef __linux /* * Don't use this unless I have to: * #define _GNU_SOURCE */ /* * Let me see if I get that straight: * -first enable "some" additional calls */ #define _LARGEFILE_SOURCE /* * -then enable the 64 bits variants of traditional calls, on seperate names */ #define _LARGEFILE64_SOURCE /* * and now make the 64 bit variants shadow the old calls */ #define _FILE_OFFSET_BITS 64 #endif #include #include #include #include #include #if HAVE_UNISTD_H || CRAENV #include #endif #include #if TIME_WITH_SYS_TIME || CRAENV #include #include #else /* TIME_WITH_SYS_TIME */ #if HAVE_SYS_TIME_H #include #else #include #endif #endif /* TIME_WITH_SYS_TIME */ #include #ifdef HAVE_WINSOCK2_H #include #endif #ifdef __linux #define __USE_GNU #endif #include #include #ifdef HAVE_SYS_UIO_H #include #endif #include #if HAVE_SYS_WAIT_H || CRAENV #include #endif #if HAVE_POLL_H #include #ifndef POLLRDNORM #define POLLRDNORM 0 #endif #ifndef POLLWRNORM #define POLLWRNORM 0 #endif #ifndef INFTIM #define INFTIM -1 #endif #endif /* HAVE_POLL_H */ #ifdef HAVE_SYS_STATVFS_H #include #endif #ifndef NOSOUND #ifdef HAVE_MACHINE_SOUNDCARD_H #include #define WANT_SOUND 1 #else #ifdef HAVE_SYS_SOUNDCARD_H #include #define WANT_SOUND 1 #else #ifdef HAVE_LINUX_SOUNDCARD_H #include #define WANT_SOUND 1 #include #endif /* linux/soundcard.h */ #endif /* either soundcard.h */ #endif /* either soundcard.h */ #endif /* ndef NOSOUND */ #ifndef HAVE_SYS_SOCKET_H #define NOTCP #endif #ifdef NOTCP #define NORESOLV 1 #endif #ifndef NOTCP #ifdef HAVE_SYS_SOCKET_H #include #endif #ifdef HAVE_NETINET_IN_H #include #endif #ifdef HAVE_ARPA_INET_H #include #endif #ifndef HAVE_NETDB_H #define NORESOLV #endif /* Solaris needs this */ #ifndef INADDR_NONE #define INADDR_NONE 0xffffffff #endif #ifndef NORESOLV #include #endif #if !defined(HAVE_SOCKLEN_T) && !defined(NORESOLV) typedef u_int32_t socklen_t; #endif #ifndef INADDR_NONE #define INADDR_NONE -1 #endif #endif /* NOTCP */ #ifdef O_SYNC # define MY_O_SYNC O_SYNC #else # ifdef O_FSYNC # define MY_O_SYNC O_FSYNC # endif #endif volatile sig_atomic_t stopit; volatile sig_atomic_t signal_report; volatile sig_atomic_t n_sighups; volatile sig_atomic_t childpid = 0; int pagesize = -1; struct pmalloc { void *data; void *allocated; size_t n_bytes; }; struct options { int v; long long n; int t; char *i; char *o; char *I; char *O; char *p; int l; int B; int c; int w; int S; int T; int user_specified_blocksize; int six; }; void malloc_page_aligned(const struct options *o, struct pmalloc * pmalloc); struct progstate { int b; /* Blocksize, to be changed to separate input and output sizes */ int ifd; int ofd; long long bytes_transferred; /* How many bytes transferred so far */ int bytes_firsttransfer; /* How many bytes were transferred at the * first read/write pair? We need this for the * extended throughput calculation. */ long long bytes_lastreport; /* ... and since last report */ double starttime; /* Time we began to try read/write */ double lasttime; /* Last time we did a read/write */ double time_firsttransfer; /* How much time did the first transfer took */ double time_lastreport; /* How much time since the last report */ long long n_lines; int pidfile_has_been_created; int pid; int teefd; /* Usually -1, but can be a file descriptor number to copy * the stream to. Currently that will always be 1 (stdout) */ int using_o_direct; int using_o_direct_i; /* Input */ struct pmalloc pmalloc; /* Size is b (blocksize) */ }; #ifndef NOTIMER static void sigtimer(const int signal) { signal_report = 1; } #endif static void sigshutdown(const int signal) { stopit = 1; } #if 0 /* Disable that for now */ static void sigchld(const int sig) { int status; int ret; fprintf(stderr, "sigchld\n"); /* * In theory we shouldn't have to use nohang, but Linux seems to send * SIGCHLD when nothing is available. */ ret = waitpid(0, &status, WNOHANG | WUNTRACED); if (ret == -1) { #ifdef __linux /* * Linux seems to get sigchld without anyone to report on SIGSTOP * Screwy stuff. This noticed for kernel 2.4.6. Why do I never run * into such stuff with FreeBSD. */ fprintf(stderr, "WARNING: "); #endif fprintf(stderr, "cstream pid %d waiting for %d: ", getpid(), childpid); perror(NULL); #ifndef __linux exit(1); #else return; #endif } if (ret != 0 && !WIFSTOPPED(status)) { signal(SIGCHLD, SIG_DFL); childpid = 0; sigshutdown(sig); } } #endif static void sigreport(int signal) { signal_report = 1; } static void sighup(int signal) { int meh = write(2, "SIGHUP\n", sizeof("SIGHUP\n") - 1); n_sighups++; } #ifdef SIGHUP static void handle_sighup(void) { fprintf(stderr, "Received SIGHUP. " "If this is an error, send another one within 5 seconds\n"); n_sighups = 1; sleep(5); if (n_sighups > 1) { n_sighups = 0; fprintf(stderr, "Continuing\n"); return; } fprintf(stderr, "Exiting...\n"); signal(SIGHUP, SIG_DFL); kill(getpid(), SIGHUP); } #endif static struct options * default_options(struct options *const o) { bzero(o, sizeof(struct options)); return o; } #ifdef HAVE_STRUCT_SIGACTION static void tsignal(const int sig, void (*const handler)(int)) { struct sigaction sa; sa.sa_handler = handler; sigemptyset(&sa.sa_mask); sa.sa_flags = 0; if (sigaction(sig, &sa, NULL) == -1) { perror("sigaction"); exit(2); } } #else static void tsignal(const int sig, void (*const handler)(int)) { if (signal(sig, handler) == SIG_ERR) { perror("signal"); exit(2); } } #endif #ifdef WANT_SOUND static void setaudio(int fd, const char *spec) { struct soundoptions { int so_format; int so_rate; int so_stereo; } so = { /* Default settings: CD quality */ AFMT_S16_LE, 44100, 1 }; char *s; if ((s = getenv("CSTREAM_AUDIO_BITRATE"))) { so.so_rate = atol(s); } if (spec == NULL) spec = "-"; if (strchr(spec, ':')) fprintf(stderr, "Warning: audio options will just be CD-quality " "settings.\nFilespec parsing not implemented\n"); if (ioctl(fd, SNDCTL_DSP_SETFMT, &(so.so_format)) == -1) fprintf(stderr, "icotl SNDCTL_DSP_SETFMT for '%s' failed: '%s'\n" , spec, strerror(errno)); if (ioctl(fd, SNDCTL_DSP_STEREO, &(so.so_stereo)) == -1) fprintf(stderr, "icotl SNDCTL_DSP_STEREO for '%s' failed: '%s'\n" , spec, strerror(errno)); if (ioctl(fd, SNDCTL_DSP_SPEED, &(so.so_rate)) == -1) fprintf(stderr, "icotl SNDCTL_DSP_SPEED for '%s' failed: '%s'\n" , spec, strerror(errno)); } #else /* WANT_SOUND */ static void setaudio(int fd, const char *const spec) { fprintf(stderr, "Sorry, don't have soundcard support compiled in, " "no audio settings will be made.\nTrying to play anyway.\n"); } #endif /* WANT_SOUND */ #ifdef NOTCP static int open_tcp(const struct options *const o, int mode) { fprintf(stderr, "Sorry, TCP/IP socket support has not been compiled in.\n"); exit(1); } #else /* NOTCP */ static void print_inet(FILE *const f, const void *const raw) { const unsigned char *c = raw; fprintf(stderr, "%d.%d.%d.%d", (int)*c, (int)*(c + 1) , (int)*(c + 2), (int)*(c + 3)); } // this construct's purpose is to always compile the old API #ifdef HAVE_GETADDRINFO static int use_getaddrlen = 1; #else static int use_getaddrlen = 0; #endif int gimme_a_socket(int domain, int type, int protocol) { int fd; if ((fd = socket(domain, type, protocol)) == -1) { perror("socket"); exit(2); } { int i = 1; if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, sizeof(i)) == -1) { perror("setsockopt(REUSEADDR), [continuing]"); } } return fd; } static int open_tcp(const struct options *const o, int mode) { char *hostname; const char *port; const char *port_iterator; const char *spec; int fd = -1; int newfd = -1; struct sockaddr *use_this_serv_addr = NULL; socklen_t use_this_serv_addr_len = -1; if (mode == O_WRONLY) { spec = o->o; } else { spec = o->i; } port = NULL; for (port_iterator = strchr(spec, ':'); port_iterator && *port_iterator; port_iterator = strchr(port_iterator, ':')) { port = port_iterator; port_iterator++; } port++; if (port == NULL) { fprintf(stderr, "Can't find port in IP Spec '%s'\n", spec); exit(1); } // this test is to allow connecting to (as a client) '::1:3333' // aka ipv6 localhost if (spec[1] != '\0' && spec[0] == ':' && spec[1] != ':') { /* Listen mode */ if (o->six == -1) { /* fixme, pull in front, so that same code is useable for client */ struct sockaddr_in serv_addr; use_this_serv_addr = (struct sockaddr *)&serv_addr; use_this_serv_addr_len = sizeof(serv_addr); bzero(&serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; serv_addr.sin_addr.s_addr = INADDR_ANY; serv_addr.sin_port = htons(atoi(port)); fd = gimme_a_socket(AF_INET, SOCK_STREAM, 0); } else { // allow or force ipv6 struct sockaddr_in6 sin6; bzero(&sin6, sizeof(sin6)); use_this_serv_addr = (struct sockaddr *)&sin6; use_this_serv_addr_len = sizeof(sin6); // sin6.sin6_len = sizeof(sin6); sin6.sin6_family = AF_INET6; sin6.sin6_flowinfo = 0; sin6.sin6_port = htons(atoi(port)); sin6.sin6_addr = in6addr_any; fd = gimme_a_socket(AF_INET6, SOCK_STREAM, 0); } if (o->v > 1 && o->six != -1) fprintf(stderr, "Bind in IPV6 mode\n"); if (bind(fd, (struct sockaddr *)use_this_serv_addr, use_this_serv_addr_len) == -1) { perror("bind"); exit(2); } if (listen(fd, 2) == -1) { perror("listen"); exit(2); } if (o->v >= 1) fprintf(stderr, "Accepting on port %d\n", atoi(port)); struct sockaddr addr_here; socklen_t addr_here_size; if ((newfd = accept(fd, &addr_here, &addr_here_size)) == -1) { fprintf(stderr, "errno: %d\n", errno); perror("accept"); exit(2); } close(fd); fd = newfd; } else { /* Connect */ hostname = strdup(spec); hostname[port - spec - 1] = '\0'; if (o->v >= 2) fprintf(stderr, "Connecting to %s %s\n", hostname, port); struct sockaddr_in serv_addr; use_this_serv_addr = (struct sockaddr *)&serv_addr; use_this_serv_addr_len = sizeof(serv_addr); bzero(&serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; serv_addr.sin_port = htons(atoi(port)); serv_addr.sin_addr.s_addr = inet_addr(hostname); if (serv_addr.sin_addr.s_addr != INADDR_NONE) { // ipv4 address specified fd = gimme_a_socket(AF_INET, SOCK_STREAM, 0); } else { #ifdef NORESOLV fprintf(stderr, "Not an IP Address and no resolver compiled in: %s\n" ,hostname); exit(1); #else if (o->v >= 2) fprintf(stderr, "Hostname lookup for '%s' use getaddrlen? %d\n", hostname, use_getaddrlen); if (use_getaddrlen == 0) { struct in_addr **a; struct hostent *hostent; hostent = gethostbyname(hostname); if (hostent == NULL) { herror(hostname); exit(2); } a = (struct in_addr **)hostent->h_addr_list; bcopy(*a, &serv_addr.sin_addr.s_addr, sizeof(struct in_addr)); if (o->v >= 2) { fprintf(stderr, "Cannonical name %s, type %s, prim addr: " , hostent->h_name , hostent->h_addrtype == AF_INET ? "ipv4" : "!ipv4"); print_inet(stderr, &serv_addr.sin_addr.s_addr); fprintf(stderr, "\n"); } fd = gimme_a_socket(AF_INET, SOCK_STREAM, 0); } #ifdef HAVE_GETADDRINFO struct addrinfo *result_begin, *result, hints; int error; bzero(&hints, sizeof(hints)); switch (o->six) { case -1: hints.ai_family = AF_INET; break; case 2: hints.ai_family = AF_INET6; break; default: // usually 1 hints.ai_family = PF_UNSPEC; break; } hints.ai_socktype = SOCK_STREAM; error = getaddrinfo(hostname, port, &hints, &result_begin); if (error) { fprintf(stderr, "getaddrinfo: '%s'\n", gai_strerror(error)); exit(3); } for (result = result_begin; result; result = result->ai_next) { if (result->ai_addr) break; } if (result == NULL) { fprintf(stderr, "empty getaddrinfo() result for '%s'\n", hostname); exit(3); } use_this_serv_addr = result->ai_addr; use_this_serv_addr_len = result->ai_addrlen; if (o->v > 1) { char *msg; switch (result->ai_family) { case AF_INET: msg = "ipv4"; break; case AF_INET6: msg = "ipv6"; break; default: msg = "not-IPv4/6"; break; } char name[8192]; char addr_string[INET6_ADDRSTRLEN]; // .... // FIXME - use inet_ntop getnameinfo(use_this_serv_addr, use_this_serv_addr_len, name, sizeof(name), NULL, 0, 0); if (inet_ntop(result->ai_family, &use_this_serv_addr, addr_string, use_this_serv_addr_len) == NULL) { strcpy(addr_string, "unknown"); } fprintf(stderr, "Cannonical name '%s', type %s, prim addr: '%s'\n" , name , msg , addr_string); } fd = gimme_a_socket(result->ai_family, result->ai_socktype, result->ai_protocol); #endif // HAVE_GETADDRINFO } if (connect(fd, use_this_serv_addr, use_this_serv_addr_len) == -1) { perror("connect"); exit(2); } free(hostname); // FIXME - free getaddrinfo result #endif // host name lookup } #if defined(HAVE_GETNAMEINFO) && !defined(NORESOLV) if (o->v >= 2) { struct { int (*func)(int, struct sockaddr *, socklen_t *); char *name; char *text; } *it, funcs[3] = { {getsockname, "getsockname", "Local binding"}, {getpeername, "getpeername", "Remote binding"}, {NULL} }; union { struct sockaddr sa; char data[8192]; } un; socklen_t len; len = sizeof(un); for (it = funcs; *it->func; it++) { char hostname[8192]; char service[8192]; if (it->func(fd, &un.sa, &len) == -1) { perror(it->name); exit(2); } getnameinfo(&un.sa, len, hostname, sizeof(hostname) , service, sizeof(service), NI_NUMERICHOST|NI_NUMERICSERV); fprintf(stderr, "%s %s:%s\n", it->text, hostname, service); } } #endif /* HAVE_GETNAMEINFO && !NORESOLV*/ return fd; } #endif /* else NOTCP */ int get_fs_blocksize(const char *const filename, int flags, int mode) { struct statvfs statfs; int fd; fd = open(filename, flags, mode); if (fd == -1) { perror("Cannot open input file (to get block size)"); exit(2); } if (fstatvfs(fd, &statfs) == -1) { perror("Cannot get FS blocksize, you need to use -b\n"); exit(2); } close(fd); return statfs.f_bsize; } // fixme, make this usable as open_input_file, too void open_output_file(const struct options *const o , struct progstate *const state, int flags) { int mode = 0666; if (strchr(o->O, 'S')) { #ifdef MY_O_SYNC flags |= MY_O_SYNC; if (o->v > 1) { fprintf(stderr, "Using O_SYNC on output file\n"); } #else fprintf(stderr, "Trying to use O_SYNC but this OS doesn't have it\n"); exit(2); #endif } #ifdef HAVE_O_DIRECT if (state->using_o_direct) { flags |= O_DIRECT; if (o->v > 1) { fprintf(stderr, "Using O_DIRECT on output file with blocksize %d\n" , state->b); } if (!o->user_specified_blocksize) { #ifdef HAVE_SYS_STATVFS_H #if 0 // code that broke -B fixme tmp_blocksize = get_fs_blocksize(o->o, flags, mode); if (state->b && state->b != tmp_blocksize) { fprintf(stderr, "WARNING: blocksize set to %d, but output filesystem \n" "requires %d. Continuing anyway with %d.\n" , state->b , tmp_blocksize , state->b); } else { state->b = tmp_blocksize; } #else struct statvfs statfs; state->ofd = open(o->o, flags, mode); if (state->ofd == -1) { perror("Cannot open output file (to get block size)"); exit(2); } if (fstatvfs(state->ofd, &statfs) == -1) { perror("Cannot get FS blocksize, you need to use -b\n"); exit(2); } state->b = statfs.f_bsize; close(state->ofd); #endif // broken code #else fprintf(stderr, "This platform does not have statvfs, you need to " "specify the blocksize manually with -b, it must match the " "output filesystem blocksize\n"); exit(2); #endif } } #endif state->ofd = open(o->o, flags, mode); if (state->ofd == -1) { perror("Cannot open output file"); exit(2); } } static void init(struct options *const o, struct progstate *const state , const int blocksize) { struct timeval t; bzero(state, sizeof(*state)); pagesize = getpagesize(); if (o->I == NULL) o->I = ""; if (o->O == NULL) o->O = ""; if (strchr(o->O, 'D')) { #ifdef HAVE_O_DIRECT state->using_o_direct = 1; #else fprintf(stderr, "Support for O_DIRECT not compiled in\n"); exit(1); #endif } if (blocksize == 0) { state->b = 8192; } else { state->b = blocksize; o->user_specified_blocksize = 1; } if (state->b == 0) state->b = state->b; if (strchr(o->I, 'D')) state->using_o_direct_i = 1; // fixme // need code to check that blocksize specified // works for both in and out if (o->w == 0) o->w = state->b; if (state->b < state->b) { fprintf(stderr, "-B must not be lower than -b or -n (%d/%d)\n" , state->b, state->b); exit(1); } if (o->c < 0 || o->c > 4) { fprintf(stderr, "-c must must be 0, 1, 2, 3 or 4\n"); exit(1); } if (o->i == NULL || o->i[0] == '\0') state->ifd = 0; else if (!strcmp(o->i, "-")) state->ifd = -1; else { if (strchr(o->I, 'f')) { unlink(o->i); if (mkfifo(o->i, 0666) == -1) { perror("mkfifo() in"); exit(2); } state->ifd = open(o->i, O_RDWR); } else { if (strchr(o->i, ':') && !strchr(o->I, 'N')) state->ifd = open_tcp(o, O_RDONLY); else state->ifd = open(o->i, O_RDONLY); } if (state->ifd == -1) { fprintf(stderr, "Cannot open input file/tcpspec '%s': ", o->i); perror(NULL); exit(2); } } if (strchr(o->O, 't')) { /* Tee to fd mode */ state->teefd = 3; if (write(state->teefd, "", 0) == -1) { fprintf(stderr, "stream copy to fd 3 requested, but fd3 is not open\n"); fprintf(stderr, "Use from shell like this:\n" " cstream -O t 3> /tmp/file\n"); exit(1); } } else state->teefd = -1; if (o->o == NULL || o->o[0] == '\0') state->ofd = 1; else if (!strcmp(o->o, "-")) state->ofd = -1; else { if (strchr(o->O, 'f')) { /* Fifo */ unlink(o->o); if (mkfifo(o->o, 0666) == -1) { perror("mkfifo() out"); exit(2); } } if (strchr(o->o, ':') && !strchr(o->O, 'N')) state->ofd = open_tcp(o, O_WRONLY); else { open_output_file(o, state, O_RDWR | O_CREAT | O_TRUNC); /* sets ofd */ } } if (o->v >= 4) fprintf(stderr, "Files are open at fd %d/%d\n", state->ifd, state->ofd); if (strchr(o->I, 'a')) /* Audio in */ setaudio(state->ifd, o->i); if (strchr(o->O, 'a')) /* Audio out */ setaudio(state->ofd, o->o); if (o->c > 0 && (state->ofd == -1 || state->ifd == -1)) { fprintf(stderr, "Do not use -c > 0 if you generate or sink data.\n"); exit(1); } if (o->c == 4 && o->t != 0) { fprintf(stderr, "-t not implemented for -c 4\n"); exit(1); } state->pidfile_has_been_created = 0; if (o->p) { FILE *f; struct stat sb; if (stat(o->p, &sb) == -1 && errno == ENOENT) { state->pidfile_has_been_created = 1; } f = fopen(o->p, "w"); if (f == NULL) { perror("fopen()/write/pidfile failed"); exit(2); } fprintf(f, "%d\n", getpid()); fclose(f); } state->bytes_transferred = 0; if (o->l) state->n_lines = 0; stopit = 0; signal_report = 0; n_sighups = 0; #ifdef SIGUSR2 tsignal(SIGUSR2, sigshutdown); #endif #ifdef SIGUSR1 tsignal(SIGUSR1, sigreport); #endif #ifdef SIGINFO if (!o->S) tsignal(SIGINFO, sigreport); #endif #ifdef SIGHUP tsignal(SIGHUP, sighup); #endif state->bytes_firsttransfer = -1; state->time_firsttransfer = -1.0; state->bytes_lastreport = -1; state->time_lastreport = -1.0; if (gettimeofday(&t, NULL) == -1) { perror("gettimeofday() failed"); exit(2); } state->starttime = (double)t.tv_sec + (double)t.tv_usec / 1000000.0; state->lasttime = -1.0; state->pmalloc.n_bytes = state->b; malloc_page_aligned(o, &state->pmalloc); } static void closefiles(struct progstate *const state) { if (state->ofd != 1 && state->ofd != 2 && state->ofd != -1) if (close(state->ofd) == -1) { perror("Cannot close outfile"); } if (state->ifd != 0 && state->ifd != -1) if (close(state->ifd) == -1) { perror("Cannot close infile"); } } /* Will return true if something has been written */ static void print_kmg(const char *const pre , const char *const format, const double num , const char *const post, FILE *const f) { if (pre != NULL) fprintf(f, "%s", pre); if (num >= 1000000000.0) { fprintf(f, format, num / 1024.0 / 1024.0 / 1024.0); fprintf(f, " G"); } else if (num >= 1000000.0) { fprintf(f, format, num / 1024.0 / 1024.0); fprintf(f, " M"); } else if (num >= 1000.0) { fprintf(f, format, num / 1024.0); fprintf(f, " K"); } else { fprintf(f, format, num); fprintf(f, " "); } if (post != NULL) fprintf(f, "%s", post); } static void report(const struct options *const o, struct progstate *const state, int curbytes) { struct timeval t2; double sofar; double rate; #ifndef NOTIMER struct itimerval itv; #endif if (gettimeofday(&t2, NULL) == -1) { perror("gettimeofday() failed"); exit(2); } sofar = ((double)t2.tv_sec + (double)t2.tv_usec / 1000000.0) - state->starttime; if (sofar > 0) rate = (double)state->bytes_transferred / sofar; else rate = 0.0; fprintf(stderr,"%.0f B",(double)state->bytes_transferred); print_kmg(" ", "%.1f", (double)state->bytes_transferred, "B", stderr); if (sofar < 200.0) { fprintf(stderr," %.2f s", sofar); } else { fprintf(stderr," %.1f s", sofar); if (sofar >= 3600.0) fprintf(stderr, " (%d:%02d h)", (int)sofar / 3600, (int)sofar % 3600 / 60); else fprintf(stderr, " (%d:%02d min)", (int)sofar / 60, (int)sofar % 60); } fprintf(stderr," %.0f B/s", rate); print_kmg(" ", "%.2f", rate, "B/s", stderr); if (o->l) fprintf(stderr, " %g lines", (double)state->n_lines); if (curbytes != -1 && state->b != state->b) fprintf(stderr, " %.1f %%buf", (double)curbytes / (double)state->b * 100.0); fprintf(stderr, "\n"); if (o->v >= 2 && (sofar - state->time_firsttransfer) > 0.0) { rate = ( (double)state->bytes_transferred - (double)state->bytes_firsttransfer ) / (sofar - state->time_firsttransfer); fprintf(stderr,"Since end of first transfer: %.0f B/s", rate); print_kmg(" ", "%.2f", rate, "B/s", stderr); fprintf(stderr, "\n"); if (state->bytes_lastreport != -1) { rate = ( (double)state->bytes_transferred - (double)state->bytes_lastreport ) / (sofar - state->time_lastreport); fprintf(stderr,"Since last report : %.0f B/s", rate); print_kmg(" ", "%.2f", rate, "B/s", stderr); fprintf(stderr, "\n"); } } state->bytes_lastreport = state->bytes_transferred; state->time_lastreport = sofar; if (o->T) { #ifndef NOTIMER itv.it_interval.tv_sec = o->T; itv.it_interval.tv_usec = 0; itv.it_value.tv_sec = o->T; itv.it_value.tv_usec = 0; setitimer(ITIMER_REAL, &itv, NULL); #else fprintf(stderr, "WARNING: timer support not compiled in\n"); #endif } } int my_write(const struct options *const o, struct progstate *const state , const void *buf, const size_t n_bytes) { int ret; static int warning_printed = 0; if (state->using_o_direct && (long)buf % pagesize != 0) { if (warning_printed == 0) { warning_printed = 1; fprintf(stderr, "Write from buffer not page aligned, copying data\n"); } if (state->pmalloc.n_bytes < n_bytes) { fprintf(stderr, "Target buffer too small, reallocating\n"); free(state->pmalloc.allocated); state->pmalloc.n_bytes = n_bytes; malloc_page_aligned(o, &state->pmalloc); } memcpy(state->pmalloc.data, buf, n_bytes); buf = state->pmalloc.data; } ret = write(state->ofd, buf, n_bytes); if (ret != -1) return ret; /* Error */ /* This is fine */ if (errno == EINTR) return 0; /* If we were doing O_DIRECT, retry after reopening */ if (state->using_o_direct) { if (o->v > 0) fprintf(stderr, "Write of %llu bytes failed at %p (%lld) (normal)" ", reopening without O_DIRECT\n" , (unsigned long long)n_bytes , buf, (long long)(long)buf % pagesize); if (close(state->ofd) == -1) { perror("Cannot close output file\n"); exit(2); } state->using_o_direct = 0; open_output_file(o, state, O_RDWR | O_APPEND); } ret = write(state->ofd, buf, n_bytes); if (ret != -1) return ret; if (errno == EINTR) return 0; report(o, state, -1); perror("write"); exit(2); } void malloc_page_aligned(const struct options *const o , struct pmalloc *const pmalloc) { pmalloc->allocated = malloc(pmalloc->n_bytes + pagesize); if (pmalloc->allocated == NULL) { perror("malloc"); exit(2); } pmalloc->data = pmalloc->allocated + pagesize - (long)pmalloc->allocated % pagesize; if (o->v >=4) { fprintf(stderr, "Page-aligned malloc at %p -> %p\n" , pmalloc->allocated, pmalloc->data); } } #if HAVE_POLL_H static void pollloop(const struct options *const o , struct progstate *const state) { char *buf; /* Always points to base of allocation */ char *curread, *curwrite; /* Iterators */ int ret; struct pollfd pollfd[2]; struct pollfd *pfd; int want_to_read; int want_to_write; struct pmalloc palloc; palloc.n_bytes = state->b; malloc_page_aligned(o, &palloc); buf = palloc.data; pollfd[0].fd = state->ifd; pollfd[0].events = POLLIN|POLLRDNORM; pollfd[1].fd = state->ofd; pollfd[1].events = POLLOUT|POLLWRNORM; curread = curwrite = buf; ret = -1; while (stopit == 0) { want_to_read = want_to_write = 0; /* Something left to write? */ if (curwrite < curread) want_to_write = 1; /* Space in buffer for another read */ if (curread - buf /* Bytes in Buffer */ <= state->b - state->b /* Max bytes in buffer for another read() */ ) { want_to_read = 1; } else { /* * No space for another read(). * Try to reset buffer pointers if everything has been written. * In that case, we also want to read into the new buffer. * Otherwise, we want to write, but not read. */ if (curwrite == curread) { curread = curwrite = buf; want_to_read = 1; } } if (want_to_read) pfd = pollfd; else pfd = pollfd + 1; if (o->v >= 4) fprintf(stderr, "Polling, want_to_read %d want_to_write %d\n" , want_to_read, want_to_write); ret = poll(pfd, want_to_read + want_to_write, INFTIM); if (ret == -1) { if (errno == EINTR) continue; perror("poll"); exit(2); } if (o->v >= 4) fprintf(stderr, "Poll returned %d\n", ret); if (want_to_write && pollfd[1].revents & (POLLOUT|POLLWRNORM)) { int nbytes; if (o->w <= curread - curwrite) nbytes = o->w; else nbytes = curread - curwrite; if (o->v >= 4) fprintf(stderr, "Trying to write %d bytes (1)\n", nbytes); ret = my_write(o, state, curwrite, nbytes); if (o->v >= 4) fprintf(stderr, "Wrote %d bytes\n", ret); curwrite += ret; } if (want_to_read && pollfd[0].revents & (POLLIN|POLLRDNORM)) { if (o->v >= 4) fprintf(stderr, "Trying to read\n"); if (o->n && state->bytes_transferred + state->b > o->n) { ret = read(state->ifd, curread, o->n - state->bytes_transferred); } else ret = read(state->ifd, curread, state->b); if (ret == -1) { if (errno == EINTR) continue; perror("read"); exit(2); } if (o->v >= 4) fprintf(stderr, "Read %d bytes\n", ret); curread += ret; state->bytes_transferred += ret; } if (signal_report) { report(o, state, curread - buf); signal_report = 0; } if (n_sighups > 0) { handle_sighup(); } if ( ((want_to_read && ret == 0) || (o->n == state->bytes_transferred)) && curwrite == curread) { if (o->v > 1) fprintf(stderr, "#%dfinishing on condition 1\n", childpid ? 1 : 0); stopit = 1; } } if (o->v >= 1) report(o, state, -1); closefiles(state); free(palloc.allocated); } #endif /* HAVE_POLL_H */ static void loop(struct options *const o, struct progstate *const state) { char *buf; /* Holds the whole buffer state->b*/ char *curbuf; /* Iterates over buf when reading and leave after last * read position */ char *curbuf2; /* Iterate over buf when writing */ int nbytes = 0; /* Just one system call read() */ long long bytes_read = 0; /* Overall, both loops */ int pipefd[2]; struct pmalloc palloc; state->pid = getpid(); if (o->c > 0) { if (pipe(pipefd) == -1) { perror("pipe"); exit(3); } childpid = fork(); if (childpid == -1) { perror("fork"); exit(3); } if (childpid == 0) { /* Child */ state->pid = getpid(); /* reads from pipe */ close(pipefd[1]); state->ifd = pipefd[0]; } else { /* Parent */ #if 0 /* Disable that for now */ tsignal(SIGCHLD, sigchld); #endif if (o->v >= 4) fprintf(stderr, "Child has pid (%d)\n", state->pid); /* Parent writes to pipe */ close(pipefd[0]); state->ofd = pipefd[1]; } } if (o->c == 1) { /* Reader will buffer */ if (childpid == 0) { /* Then writer will just use block size */ state->b = state->b; } } else if (o->c == 2) { if (childpid != 0) { /* Otherwise reader will just use block size */ state->b = state->b; } } palloc.n_bytes = state->b; malloc_page_aligned(o, &palloc); buf = palloc.data; if (o->c == 0 || childpid != 0) { /* Only in parent process */ if (state->ifd == -1) { /* Data will just be generated, fill buffer will something resembling * something useful * * Either ASCII text or a 440 Hz wave (audio mode) */ if (!strchr(o->O, 'a')) { /* ASCII text for non-audio */ int i; for (i = 0; i < state->b; i++) { /* Newlines below 80 chars and at end of buffer */ if ((i+1) % 76 == 0 || i == o->n - 1) buf[i] = '\n'; else buf[i] = 'A' + rand() % 26; } } else { /* * Audio mode, generate 440 Hz wave * * Do it verbose to do it right */ int i; double rate = 44100.0; double freq = 440.0; double pi = 3.141592653589793; int frames = rate / freq; unsigned short val; if (frames * 2 * 2 > state->b) { fprintf(stderr, "Blocksize too small for wave\n"); exit(1); } state->b = state->b = frames * 2 * 2; /* 16 bit Stereo */ for (i = 0; i < frames; i++) { val = sin((double)i * 2.0 * pi / (double)frames) * 32767.0; buf[i * 4] = buf[i * 4 + 2] = val % 256; buf[i * 4 + 1] = buf[i * 4 + 3] = val / 256; } } } } else { /* In child process, don't answer to signals */ #ifdef SIGUSR1 signal(SIGUSR1, SIG_DFL); #endif #ifdef SIGINFO signal(SIGINFO, SIG_DFL); #endif #ifdef SIGHUP signal(SIGHUP, SIG_DFL); #endif } while (stopit == 0) { /* Outer loop - encapsulates pairs of read/write loops */ for (curbuf = buf; stopit == 0 && curbuf + state->b <= buf + state->b; curbuf += nbytes, bytes_read += nbytes) { /* Inner loop, fill buffer with reads() */ /* Sleep long enough to satisfy througput limit. Do this before * the read, so that the sending process will be blocked exactly * the right amount of time. */ if (o->t != 0 && !(o->c > 0 && childpid == 0) && bytes_read > 0) { struct timeval t2; double sofar; double theory; double time_to_sleep; if (gettimeofday(&t2, NULL) == -1) { perror("gettimeofday() failed"); exit(2); } if (o->t > 0) { /* Limit bandwith absolutely over whole session */ sofar = ((double)t2.tv_sec + (double)t2.tv_usec / 1000000.0) - state->starttime; /* In theory we should have needed how many useconds? */ theory = (double)bytes_read / (double)o->t; if (o->v >= 4) fprintf(stderr,"We needed %g seconds, should be %g\n" , sofar, theory); if (sofar < theory) usleep((theory - sofar) * 1000000.0); } else { /* limit bandwith per read/write */ sofar = ((double)t2.tv_sec + (double)t2.tv_usec / 1000000.0) - state->lasttime; /* fixme efficiency - can be moved to be computed once */ /* how much time should it have taken? */ theory = state->b / (double) - o->t; time_to_sleep = (theory - sofar) * 1000000.0; if (o->v >= 4) fprintf(stderr,"We needed %g seconds for %d bytes" ", should be %g, sleeping %g\n" , sofar, state->b, theory, time_to_sleep); state->lasttime = ((double)t2.tv_sec + (double)t2.tv_usec / 1000000.0); if (sofar < theory) { usleep(time_to_sleep); state->lasttime += time_to_sleep / 1000000.0; } } } /* Now do one read to the end of the current buffer */ if (state->ifd == -1) { /* Just generate data */ if (o->n && bytes_read + state->b > o->n) { nbytes = o->n - bytes_read; if (o->v > 1) fprintf(stderr, "#%d finishing on condition 3\n", childpid ? 1 : 0); stopit = 1; } else nbytes = state->b; } else { if (o->v >= 4) fprintf(stderr,"#%d trying to read %d bytes\n", childpid ? 1 : 0, state->b); if (o->n && bytes_read + state->b > o->n) { nbytes = read(state->ifd, curbuf, o->n - bytes_read); if (o->v > 1) fprintf(stderr, "#%d finishing on condition 4\n", childpid ? 1 : 0); stopit = 1; } else nbytes = read(state->ifd, curbuf, state->b); if (o->v >= 4) fprintf(stderr,"#%d read %d bytes\n", childpid ? 1 : 0, nbytes); if (nbytes == 0) { if (o->v > 1) fprintf(stderr, "#%d finishing on condition 1\n", childpid ? 1 : 0); stopit = 1; } if (nbytes == -1) { if (errno == EINTR) { nbytes = 0; } else { perror("read() failed"); report(o, state, -1); exit(2); } } } if (signal_report) { report(o, state, curbuf - buf); signal_report = 0; } if (n_sighups > 0) { handle_sighup(); } } /* Count lines if requested */ if (o->l) { char *s; for (s = buf; s < curbuf; s++) { if (*s == '\n') { state->n_lines++; } } } /* Write out */ for (curbuf2 = buf; curbuf2 < curbuf; curbuf2 += nbytes) { if (state->ofd == -1) { if (curbuf - curbuf2 < state->b) nbytes = curbuf - curbuf2; else nbytes = state->b; } else { int n; if (curbuf - curbuf2 < state->b) n = curbuf - curbuf2; else n = state->b; if (o->v >= 4) fprintf(stderr, "Trying to write %d bytes (2) from %p\n", n , curbuf2); nbytes = my_write(o, state, curbuf2, n); if (o->v >= 4) fprintf(stderr,"#%d wrote %d bytes\n", childpid ? 1 : 0, nbytes); /* ? tee mode */ if ((o->c == 0 || childpid != 0) && /* Only in parent process */ state->teefd != -1) { if (curbuf - curbuf2 < state->b) nbytes = write(state->teefd, curbuf2, curbuf - curbuf2); else nbytes = write(state->teefd, curbuf2, state->b); if (nbytes == -1) { if (errno == EINTR) { nbytes = 0; } else { perror("write() failed"); report(o, state, -1); exit(2); } } if (o->v >= 4) fprintf(stderr,"#%d wrote %d bytes to fd %d\n" , childpid ? 1 : 0, nbytes, state->teefd); } } state->bytes_transferred += nbytes; if (o->v >= 2 && state->bytes_firsttransfer == -1) { struct timeval t; state->bytes_firsttransfer = nbytes; if (gettimeofday(&t, NULL) == -1) { perror("gettimeofday() failed"); exit(2); } state->time_firsttransfer = ((double)t.tv_sec + (double)t.tv_usec / 1000000.0) - state->starttime; } if (o->n && state->bytes_transferred >= o->n) { if (o->v > 1) fprintf(stderr, "#%d finishing on condition 5\n", childpid ? 1 : 0); stopit = 1; } if (signal_report) { report(o, state, curbuf - buf); signal_report = 0; } if (n_sighups > 0) { handle_sighup(); } } } if (o->v >= 1 && ! (o->c > 0 && childpid == 0)) /* Parent only */ report(o, state, -1); closefiles(state); if (o->c > 0) { if (childpid == 0) { exit(0); } else { wait(NULL); } } free(palloc.allocated); } void cleanup(const struct options *const o, struct progstate *const state) { if (o->p && state->pidfile_has_been_created) if (unlink(o->p) == -1) perror("Unlink pidfile failed - continuing"); } static void print_version(void) { printf("%s\n", VERSION); } static void usage(void) { fprintf(stderr, "cstream by Martin Cracauer - version " VERSION "\n"); fprintf(stderr, "-V = print version number to stdout and exit with 0\n" "-v = verbose [default: off]\n" " 0 = nothing\n" " 1 = report bytes transferred and throughput\n" " 2 = also throughput after first read/write\n" " 3 = also seperate throughput for read and write " "(unimplemented)\n" " 3 = verbose stats on every read/write\n" "-b = blocksize [default: 8192]\n" "-B = buffer (at most) bytes [default: one block]\n" "-c = Concurrency, writing done by a seperate process\n" " 0 = no concurrency, one one process\n" " 1 = read side buffers\n" " 2 = write side buffers\n" " 3 = both sides buffer, -B amount of data will be " "transferred at once\n" "-n = overall size of data [default: unlimited]\n" "-t = throughput in bytes/sec [default: unlimited]\n" " if positive, bandwith is average over whole session.\n" " if negative, every write is delayed to not excceed.\n" "-i = name of input file, - = generate stream yourself\n" " to use stdin, use -i ''\n" "-o = name of output file, - = just sink data\n" " to use stdout, -o ''\n" "-I = Type of input file\n" "-O = Type of ouput file\n" " 'f' = fifo (create it)\n" " 'a' = set audio modes on file (i.e. CD quality)\n" " 'N' = don't use TCP even if filename has ':'\n" " 't' = tee - in addition to outfile, " "copy stream to fd 3\n" " 'D' = O_DIRECT\n" " 'S' = O_SYNC\n" " [Multiple chars allowed]\n" "-p = Write pid as ascii integer to file \n" "-l include line count in statistics\n" "-w = Set write block size (-c 5 only)\n" "-S Don't output statistic on SIGINFO\n" "-T = Report throughput every seconds\n" "SIGINFO causes statistics to be written to stderr\n" "SIGUSR1 causes statistics to be written to stderr\n" "SIGUSR2 causes loop end after next buffer transfer\n" " if -i has not been used, specifies input file\n" "-6 Use IPV6: -1 = don't, 1 = allow both, 2 = force v6\n" " On some platforms server mode 1 forces ipv6, as\n" " they don't open both v4 and v6 ports from one bind call.\n" ); exit(1); } long long atoi_kmg(const char *const s) { long long res; char c; res = atoi(s); if (s[0] != '\0') { c = tolower(s[strlen(s)-1]); switch (c) { case 'k': res *= (long long)1024; break; case 'm': res *= (long long)1024 * (long long)1024; break; case 'g': res *= (long long)1024 * (long long)1024 * (long long)1024; break; } } return res; } int main(int argc, char *const argv[]) { struct options o; struct progstate state; int ch; size_t blocksize = 0; default_options(&o); while ((ch = getopt(argc, argv, "b:B:c:i:I:n:o:O:p:St:T:v:Vl6:")) != -1) { switch(ch) { case 'v': o.v = atoi(optarg); break; case 'b': blocksize = atoi_kmg(optarg); break; case 'B': o.B = atoi_kmg(optarg); break; case 'c': o.c = atoi(optarg); break; case 'l': o.l = 1; break; case 'n': o.n = atoi_kmg(optarg); break; case 't': o.t = atoi_kmg(optarg); break; case 'S': o.S = 1; break; case 'i': o.i = strdup(optarg); break; case 'o': o.o = strdup(optarg); break; case 'I': o.I = strdup(optarg); break; case 'O': o.O = strdup(optarg); break; case 'p': o.p = strdup(optarg); break; case 'V': print_version(); exit(0); case 'w': o.w = atoi_kmg(optarg); break; case 'T': #ifdef NOTIMER fprintf(stderr, "Warning: timer support not compiled in\n"); #endif o.T = atoi(optarg); break; case '6': if (!atoi(optarg) != 0) { fprintf(stderr, "-6 arg must be a number, -1, 1 or 2: '%s'\n", optarg); exit(1); } o.six = atoi(optarg); break; default: usage(); } } argc -= optind; argv += optind; switch (argc) { case 0: break; case 1: if (o.i == NULL) o.i = strdup(argv[0]); else usage(); break; default: usage(); } init(&o, &state, blocksize); if (o.T) { #ifndef NOTIMER struct itimerval itv; signal(SIGALRM, sigtimer); itv.it_interval.tv_sec = o.T; itv.it_interval.tv_usec = 0; itv.it_value.tv_sec = o.T; itv.it_value.tv_usec = 0; setitimer(ITIMER_REAL, &itv, NULL); #endif } if (o.c == 4) { #if HAVE_POLL_H pollloop(&o, &state); #else fprintf(stderr, "Support for poll loop not available\n"); exit(1); #endif } else loop(&o, &state); cleanup(&o, &state); free(state.pmalloc.allocated); /* More freeing of memory omitted */ return 0; } cstream-3.0.0/CHANGES0000644040216600116100000001134711572450627011105 000000000000003.0.0: ------ IPV6 support for IPV6 day 2011. The IPV6 support shouldn't break anything after hostname lookup succeeds. Issues might be building on older platforms if I screwed up the autoconf mechanism to not compile it in. Having said that, assorted little code cleanups are in this release, too. They shouldn't break anything but non-IPV6 things were touched. Aftermath for 2.7.4 - 2.7.6: -------------------- ATTENTION: I'm afraid that support for the '-B ' was clobbered in 2.7.4 or whereabouts. This one allowed you do have a reader do multiple reads before the writer could write or vice versa. Change reverted in 2.7.6. 2.7.4 and 2.75 do not have working -B. 2.8.0: ------ Support platforms that do not have open(2) with O_DIRECT. Such as MacOS X. 2.7.6: ------ Revert 2.7.3 which broke -B 2.7.5: ------ NetBSD and general pkgsrc compatibility. Should get rid of the only patch used in pkgsrc. 2.7.4: ------ Print the message that we switch to normal from O_DIRECT only when verbose > 0. SEE ABOVE, broke -B. CHANGE reverted 2.7.3: ------ More c flags changes for more portability. 2.7.2: ------ Fix compilation under Redhat-7.3. 2.7.1: ------ Support for $CSTREAM_AUDIO_BITRATE. 2.7.0: ------ Support for O_SYNC and O_DIRECT, but only on the output side for now. Please send mail if you want this for input. 2.6.1: ------ Timer-based throughput reports from -T will now also print what the throughput since the last report was. Useful when performance changes during runtime. 2.6.0: ------ Bandwidth limiting was not > 4 GB clean on platforms with 32 bit integers. I had lost an already existing fix here. 2.5.2: ------ Commandline options, options to -O and -I: -ON -IN which prevents cstream from interpreting filenames with ":" in them as TCP specifications. By default the presense of a colon means host:port. 2.5.1: ------ Add option -T which will print the statistics every seconds. 2.5: ---- There was a 4 GB limitation on 32 bit machines when you used bandwith limiting. Thanks to Sergey M. Serov for reporting! 2.4.1b: ------- Use SO_REUSEADDR on serving socket. 2.4: ---- Bandwidth limiting is not not only as a strict maximum at any point in time but now you can also limit for the session as a whole. Do so by giving a negative bandwidth limit. To make it clear: if the session was running below the limit for some time for other bottlenecks in the chain, then it will run above the limit to make good for it at other times when it can. 2.3: ---- Identical to 2.3b3, sigchld handling is assumed to be correct now and works with various versions of the Linux kernel. Version 2.3 has sound support, see e.g. `cstream -Oa -o /dev/dsp`. 2.3b3: ------ Further SIGCHLD fixes. 2.3b2: ------ Fix SIGCHLD handling so that stopping and continuing the child in a concurrent mode would not terminate. 2.3b1: ------ Version 2.3 has sound support, see e.g. `cstream -Oa -o /dev/dsp` version 2.2: ------------ TCP/IP socket support. Linux glibc 64 bit files. Version 2.1: ------------ - Add audio mode: -O a/-I a try to switch output file into CD-quality 16bit 44100Hz stereo mode. If input is just generated, a sine wave of 440 Hz will be played. - Add tee-fd mode. -O t will copy the stream to file descriptor 3 (which must already be opened by parent process). Version 2.0: ------------ - Add -c flag for concurrent mode. - Add -B flag (buffering of multiple input blocks before output blocks are written). - Add -l flag (statistics will include line count). - If input data is just 'generated', use a buffer that remotely resembles ASCII text with a line length of 76 chars and has a newline at the end of data. - Number of bytes transferred is also displayed in GB/MB/KB, if appriopriate. - Change throughput report to be shorter. - Add automatic tests `make check`. - Througput reporting on signals got the wrong time when cstream was not called with -v > 0. - Use SIGINFO for throughput report. - Use more values from configure script. - Throughput report is now asynchronous, not after next read() or write(). - Throughput report will report buffer fillage if -B is in use. Version 1.4: ------------ - Fix Linux compilation problems. - The -b and -t options now also recognize 'k', 'm', 'g' for kilo-, mega-, gigabyte like the -n option did. - The signal for shutdown is now SIGUSR2, not SIGHUP. Version 1.3: ------------ - Fix permissions of created files - You can now specify the input file without using a switch (if it is the last argument) - Improve messages Version 1.2: ------------ - Argument checking for -v was broken, fixed. Version 1.1: ------------ - Fix version number reporting, introduce -V switch. - Fix usage() typos. Version 1.0: ------------ - Initial version. cstream-3.0.0/COPYRIGHT0000644040216600116100000000214006700202602011355 00000000000000cstream is copyright 1998, 1999 by Martin Cracauer. The license is similar to the X consortium license: Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, dis- tribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the fol- lowing conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL- ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABIL- ITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. cstream-3.0.0/INSTALLATION0000644040216600116100000000046507236041724011731 00000000000000cstream follows the usual GNU configure building process: ./configure --prefix=/usr/local make make install The following compile-time options are supported: ------------------------------------------------- --enable-notcp Leave out TCP/IP socket code --enable-nosound Leave out audio control code cstream-3.0.0/cstream.10000644040216600116100000002570010421270520011610 00000000000000.\"Copyright 1998, 1999 Martin Cracauer .\"See file COPYRIGHT in the distribution package for copying terms .Dd March, 30, 1999 .Dt cstream 1 .Os .Sh NAME .Nm cstream .Nd direct data streams, with bandwidth limiting, FIFO, audio, duplication and extended reporting support. .Sh SYNOPSIS .Nm cstream .Op Fl b Ar num .Op Fl B Ar num .Op Fl i Ar filename .Op Fl I Ar string .Op Fl l .Op Fl n Ar num .Op Fl o Ar filename .Op Fl O Ar string .Op Fl p Ar filename .Op Fl t Ar num .Op Fl T Ar num .Op Fl v Ar num .Op Fl V .Op Ar filename .Sh DESCRIPTION .Nm Cstream filters data streams, much like the UNIX tool .Xr dd 1 . It has a more traditional commandline syntax, support for precise bandwidth limiting and reporting and support for FIFOs. Data limits and throughput rate calculation will work for files > 4 GB. .Pp .Nm Cstream reads from the standard input and writes to the standard output, if no filenames are given. It will also 'generate' or 'sink' data if desired. .Pp Options: .Bl -tag -width "-l num " .It Fl b Ar num Set the block size used for read/write to .Ar num . The default is 8192 bytes. .It Fl B Ar num Buffer input up to .Ar num bytes before writing. The default is the blocksize. It is an error to set this to anything below the blocksize. Useful when writing tapes and simlilar that prefer few large writes of many small. .It Fl c Ar num Concurrent operation. Use a seperate process for outout. This is especially useful in combination with the -B option. .Bl -tag -compact -width " " .It 0 = use one process only (default) .It 1 = read process will buffer .It 2 = write process will buffer .It 3 = both processes will buffer. In combination with a large buffer size this will often load your memory heavily, everytime the reader transfers the buffer it collected to the writer. If you use -c 3 and have a buffer size of 128 Megabytes 256 MB of memory will be touched at once. .El .It Fl i Ar num .It Fl o Ar num Set the file names to use for input or output, respectivly. If the output file name is "-", data will just be discarded. If the input file name is "-", data will be generated 'out of the void'. If these options aren't given, stdin/stout will be used. If you need to give .Fl o or .Fl i options and want stdin/stdout, specify the empty string, like this: .Pp cstream -i'' .Pp If TCP support has been compiled in (default), hostname:portnumber will try to connect to the specified host at the specified port and :portnumber will open a TCP socket on the local machine and wait for a connection to arrive. SECURITY NOTE: cstream includes no mechanism to restrict the hosts that may connect to this port. Unless your machine has other network filters, anyone will be able to connect. .It Fl I Ar string .It Fl O Ar string Specify the type of input and output file, respectivly. .Bl -tag -compact -width " " .It If string includes 'f', a fifo will be created. .It If string includes 'a', the file will be assumed to be a opensound-compatible audio device and will be switched to CD-like settings. .It If string includes 't', a copy of the stream will be sent to file descriptor 3. .It If string includes 'N', TCP will not be used for that file even if the name has a ":". .El .It Fl l Include line count in statistics. .It Fl n Ar num Limit the total amount of data to .Ar num . If there is more input available, it will be discarded, .Nm cstream will exit after the limit has been reached. If there is less input, the limit will not be reached and no error will be signaled. .Pp .Ar num may have a trailing 'k', 'm' or 'g' which means Kilobytes, Megabytes or Gigabytes (where Kilo = 1024). This applies to all numeric options. .It Fl p Ar filename Write the process id of cstream to .Ar filename . If cstream uses a seperate writer process (option -c), this is the pid of the parent (reader) process. .It Fl t Ar num Limit the throughput of the data stream to .Ar num bytes/second. Limiting is done at the input side, you can rely on cstream not accepting more than this rate. If the number you give is positive, cstream accumulates errors and tries to keep the overall rate at the specified value, for the whole session. If you give a negative number, it is an upper limit for each read/write system call pair. In other words: the negative number will never exceed that limit, the positive number will exceed it to make good for previous underutilization. .It Fl T Ar num Report throughput every num seconds. .It Fl v Ar num Set verbose level to .Ar num . By default, it is set to 0, which means no messages are displayed as long as no errors occur. A value of 1 means that total amount of data and throughput will be displayed at the end of program run. A value of 2 means the transfer rate since the end of the first read/write pair will also be reported (useful when there is an initial delay). A value of 3 means there will also be seperate measurements for read and write. This option is resource-consuming and currently isn't implemented. A value of 4 means that notices about each single read/write will be displayed. High values include all message types of lower values. .It Fl V Print version number to stdout and exit with 0. .It Ar filename A single filename as the last argument without an option switch will be used as input file if -i has not been used. .It Ic SIGUSR1 .It Ic SIGINFO Sending SIGUSR1 (or SIGINFO, which is usually mappend to Control-T on you keyboard) to cstream causes it to display throughput rates to stderr. The stream will continue as if nothing happend. .It Ic SIGUSR2 Exit and report throughput rates, if requested. .It Ic SIGHUP I found myself sending SIGHUP accidentially too often. But ignoring or misusing SIGHUP is not an option for me. Thus, when .Nm cstream received SIGHUP, it will wait 5 seconds for another SIGHUP, to give users a chance to correct a possible mistake. If no additional SIGHUP is received, .Nm cstream kills itself with SIGHUP. .El .Sh EXAMPLES .Bl -tag -width indent .It Ic "cstream -o tmpfile -v 1 -n 384m -i -" Writes 384 Megabytes of unspecified data to file .Pa tmpfile and display verbose throughput rate. Makes a good benchmark, the speed of .Pa /dev/null varies too much from system to system. .It Ic "cstream -i tmpfile -v 1 -n 384m -o -" Read the same file back in and discard data. .It Ic "cstream -b 2000 -t 10000 /var/log/messages" Will display the file in a more or less watchable speed. .It Ic "dump 0sf 400000 - / | cstream -v 1 -b 32768 -o /dev/rst0 -p pidfile" .It Ic kill \-USR1 `cat pidfile` Write the output from dump(1) to tape. Each time the signal is sent, the throughput and data rate so far will be displayed. .It Ic "cstream -t 176400 -i /dev/dsp0 -I f -o -" Makes kind of a soundcard emulator which may be used to test audio applications that need something to write to that limits the data rate as a real soundcard does. This obviously doesn't work when the application tries to write data using mmap(2) and the application has to ignore errors when it tries to set soundcard parameters using ioctl(2). .It Ic "cstream -t 176400 -i /dev/dsp0 -I f -o /dev/dsp1 -O f" Similar soundcard emulator, except that it allows you to grab the data your applications sends to it from the other fifo, while still having precise timing. .It Ic "cstream -Oa -o /dev/dsp0 myhost.mydomain.com:17324" Connects port 3333 on host myhost.mydomain.com and whatever data it finds there will be sent to the soundcard, with appropriate settings for CD quality stero play. .It Ic "cstream -i myaudiofile.raw -o :17324" This will open a TCP server on port 17324 and waits until someone connects (for example, the commandline from the previous example). Then it will send the contents of myaudiofile.raw down the TCP stream (for the previous audio example, typically a CD audiotrack like you get from the tosha or cdparanoia utilities). .It Ic "cstream -OD -o myfile" Write to file myfile with O_DIRECT. That usually means that the filesystem buffer cache will not try to cache this file. You can use that to prevent copying operations from eating up physical memory. Note that when cstream encouters a write error it will switch the output file from O_DIRECT to a normal file and write all further blocks without O_DIRECT if writes without O_DIRECT succeed. In practice that usually means that your last block, if not a multiple of the filesystem block size, will still be written into the file (the maximum amount of data written without O_DIRECT is your blocksize minus one). That way cstream ensures that the output file has the length of the input, however odd the length was and no matter what restrictions your OS places on O_DIRECT output. Again, cstream will *not* pad the output to the block size, you get the same file and file size as if not using O_DIRECT, at the cost of switching to non-O_DIRECT whenever a block is not the right size. .It Ic cstream -i :3333 | dd obs=8192 | ./cstream -omyfile -v7 -OD This is what you need to do to buffer TCP input, so that the last cstream will not switch away from O_DIRECT prematurely because of short reads. If your input can do short reads (e.g. from TCP), and you want to ensure that O_DIRECT stays in effect, you need a buffer between the TCP stream and the O_DIRECT stream. Since cstream does not yet support different input and output block sizes, dd is suitable here. Note that this is only neccessary if the OS requires multiples of the filesystem block size for O_DIRECT. At the time of this writing this construct is needed on Linux for using TCP streams with O_DIRECT, but it is not needed on FreeBSD. .It Ic "cstream -OS -o myfile" Writes to file myfile with O_SYNC. This means by the time the system call returns the data is known to be on disk. This is not the same thing as O_DIRECT. O_DIRECT can do its own buffering, with O_SYNC there is no buffering at all. At the time of this writing, O_SYNC on both Linux and FreeBSD is very slow (1/5th to 1/10th of normal write) and O_DIRECT is reasonably fast (1/4th to 1/2 of normal write). You can combined O_SYNC and O_DIRECT. .Sh ERRORS .Bl -tag -width "-l num " .It Exit code 0 means success. .It Exit code 1 means a commandline syntax usage error. .It Exit code 2 means other errors, especially system errors. .El .Sh Bugs There should be an option to begin writing directly after the first read ended and then fill the buffer with reads in the background. Right now writing will not begin before the reader has filled the buffer completely for the first time. .Pp Not a bug: the code to do O_DIRECT is reasonably sophisticated. It will fall back to normal I/O on errors. But before doing that it knows about both filesystem blocksize requirements (will default I/O blocksize to whatever the filesystem of the output file is in) and page alignment requirements (I/O will happen from a page-aligned buffer). However, the combination of concurrent read/writes (-c options) and O_DIRECT has not been tested bejond basic verification that it gets some tests right. .Sh SEE ALSO .Xr dd 1 , .Xr mkfifo 2 .Sh HISTORY .Nm cstream was initially written by Martin Cracauer in 1998. For updates and more information see http://www.cons.org/cracauer/cstream.html cstream-3.0.0/auxdir/0000755040216600116100000000000011572667156011467 500000000000000cstream-3.0.0/auxdir/Makefile.am0000644040216600116100000000000006700172263013414 00000000000000cstream-3.0.0/auxdir/Makefile.in0000644040216600116100000002066711572666731013465 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = auxdir DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in depcomp \ install-sh missing mkinstalldirs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/auxdir/mkinstalldirs CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu auxdir/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu auxdir/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: cstream-3.0.0/auxdir/depcomp0000755040216600116100000002752510446542773012773 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects # Copyright 1999, 2000 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # `libtool' can also be set to `yes' or `no'. depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. This file always lives in the current directory. # Also, the AIX compiler puts `$object:' at the start of each line; # $object doesn't have directory information. stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" outname="$stripped.o" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; tru64) # The Tru64 AIX compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. tmpdepfile1="$object.d" tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` if test "$libtool" = yes; then "$@" -Wc,-MD else "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi if test -f "$tmpdepfile1"; then tmpdepfile="$tmpdepfile1" else tmpdepfile="$tmpdepfile2" fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a space and a tab in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. test -z "$dashmflag" && dashmflag=-M ( IFS=" " case " $* " in *" --mode=compile "*) # this is libtool, let us make it quiet for arg do # cycle over the arguments case "$arg" in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) # X makedepend ( shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift;; -*) ;; *) set fnord "$@" "$arg"; shift;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tail +3 "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. ( IFS=" " case " $* " in *" --mode=compile "*) for arg do # cycle over the arguments case $arg in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. ( IFS=" " case " $* " in *" --mode=compile "*) for arg do # cycle over the arguments case $arg in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 cstream-3.0.0/auxdir/install-sh0000755040216600116100000001272006700134515013376 00000000000000#!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 cstream-3.0.0/auxdir/missing0000755040216600116100000001105206700134515012766 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright (C) 1996, 1997 Free Software Foundation, Inc. # Franc,ois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison touch file \`y.tab.c' makeinfo touch the output file yacc touch file \`y.tab.c'" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing - GNU libit 0.0" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`configure.in'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`configure.in'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`configure.in'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch config.h.in ;; automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print \ | sed 's/^\(.*\).am$/touch \1.in/' \ | sh ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." touch y.tab.c ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequirements for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 cstream-3.0.0/auxdir/mkinstalldirs0000755040216600116100000000133706700134515014202 00000000000000#! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain # $Id: mkinstalldirs,v 1.1.1.1 1999/03/30 11:45:17 cracauer Exp $ errstatus=0 for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case "$pathcomp" in -* ) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" 1>&2 mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr fi fi pathcomp="$pathcomp/" done done exit $errstatus # mkinstalldirs ends here cstream-3.0.0/tests/0000755040216600116100000000000011572667160011330 500000000000000cstream-3.0.0/tests/Makefile.am0000644040216600116100000000011307014512003013254 00000000000000EXTRA_DIST = vars.sh test1.sh test1.log1 test1.log2 test1.log3 test1.log4 cstream-3.0.0/tests/Makefile.in0000644040216600116100000002072211572666731013323 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = tests DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/auxdir/mkinstalldirs CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ EXTRA_DIST = vars.sh test1.sh test1.log1 test1.log2 test1.log3 test1.log4 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu tests/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: cstream-3.0.0/tests/vars.sh0000644040216600116100000000004106731431173012544 00000000000000#! /bin/sh export PRG=./cstream cstream-3.0.0/tests/test1.sh0000755040216600116100000000500207014512003012621 00000000000000#! /bin/sh if [ ! $srcdir ] ; then srcdir=. fi testdir=$srcdir/tests . ${testdir}/vars.sh input () { echo bla } stderrfilter () { sed 's/^\([0-9][0-9]* B\).*$/\1/' \ | sed 's/ ([0-9]*)$//' \ | grep -v '^Since end of first transfer: ' } testit () { echo Testing with options "$@" echo Testing with options "$@" 1>&2 input | $PRG -v4 "$@" input | $PRG -v4 -b1 "$@" input | $PRG -v4 -b1 -B 8192 "$@" input | $PRG -v4 -b2 -B 8192 "$@" input | $PRG "$@" input | $PRG -b1 "$@" input | $PRG -b1 -B 8192 "$@" input | $PRG -b2 -B 8192 "$@" $PRG -i/dev/zero -n 6 -B 200 -b 3 -v4 -l -o- "$@" -c 0 $PRG -i/dev/null -n 6 -B 200 -b 3 -v4 -l -o- "$@" -c 0 $PRG -i/etc/services -n 6 -B 200 -b 3 -v4 -l -o- "$@" -c 0 $PRG -i/dev/zero -n 6 -B 200 -b 3 -v4 -l "$@" | wc -c $PRG -i/dev/null -n 6 -B 200 -b 3 -v4 -l "$@" | wc -c $PRG -i/etc/services -n 6 -B 200 -b 3 -v4 -l "$@" | wc -c $PRG -i- -n 6 -B 200 -b 3 -v4 -l -o- "$@" -c 0 $PRG -i- -n 6 -B 200 -b 3 -v4 -l -o- "$@" -c 0 $PRG -i- -n 6 -B 200 -b 3 -v4 -l -o- "$@" -c 0 $PRG -i- -n 6 -B 200 -b 3 -v4 -l "$@" -c 0 | wc -l $PRG -i- -n 6 -B 200 -b 3 -v4 -l "$@" -c 0 | wc -l $PRG -i- -n 6 -B 200 -b 3 -v4 -l "$@" -c 0 | wc -l $PRG -i $PRG | cmp - $PRG $PRG -B1m -i $PRG | cmp - $PRG $PRG -B80k -i $PRG | cmp - $PRG $PRG -B2 -b1 -i $PRG | cmp - $PRG $PRG -B1048578 -b1048577 -i $PRG | cmp - $PRG } fail () { echo $* 1>&2 exit 1 } # Tests where stderr must match exactly for opt in 0 ; do testit -c $opt done > ${testdir}/log1 2> ${testdir}/log2a # Child data alway appended, not interleaved stderrfilter < ${testdir}/log2a | grep -v '#1 ' > ${testdir}/log2 stderrfilter < ${testdir}/log2a | grep '#1 ' >> ${testdir}/log2 diff ${testdir}/test1.log1 ${testdir}/log1 || fail log1 diff ${testdir}/test1.log2 ${testdir}/log2 || fail log2 # For these tests, there is only minimal hope of comparing stderr for opt in 1 2 3 4 ; do testit -c $opt done > ${testdir}/log3 2> ${testdir}/log4 diff ${testdir}/test1.log3 ${testdir}/log3 || fail log3 if [ `wc -l < ${testdir}/log4` != `wc -l < ${testdir}/test1.log4` ] ; then echo Number of lines does not match: 1>&2 wc -l ${testdir}/log4 1>&2 wc -l ${testdir}/test1.log4 1>&2 exit 1 fi # Test with data > 4 GB if [ ! -n ""$1 ] || [ $1 != small ] ; then ( for i in 1 2 3 4 5 6 7 8 ; do cstream -b64k -i - -n1g done ) | $PRG -b 64k -B 153k -v1 -o- 2> ${testdir}/log5 egrep '8589934592 B 8.0 GB [0-9]+.[0-9][0-9] s [0-9]+ B/s [0-9]+.[0-9][0-9] MB/s' ${testdir}/log5 > /dev/null || fail 8GB-test failed fi exit 0 cstream-3.0.0/tests/test1.log10000644040216600116100000000016007014500420013046 00000000000000Testing with options -c 0 bla bla bla bla bla bla bla bla 6 0 6 1 1 1 cstream-3.0.0/tests/test1.log20000644040216600116100000000320707014500421013055 00000000000000Testing with options -c 0 #0 trying to read 8192 bytes #0 read 4 bytes #0 wrote 4 bytes #0 trying to read 8192 bytes #0 read 0 bytes 4 B #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 0 bytes 4 B #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 0 bytes #0 wrote 1 bytes #0 wrote 1 bytes #0 wrote 1 bytes #0 wrote 1 bytes 4 B #0 trying to read 2 bytes #0 read 2 bytes #0 trying to read 2 bytes #0 read 2 bytes #0 trying to read 2 bytes #0 read 0 bytes #0 wrote 2 bytes #0 wrote 2 bytes 4 B #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B #0 trying to read 3 bytes #0 read 0 bytes 0 B #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes #0 wrote 3 bytes #0 wrote 3 bytes 6 B #0 trying to read 3 bytes #0 read 0 bytes 0 B #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6 B 6 B 6 B #0 wrote 3 bytes #0 wrote 3 bytes 6 B #0 wrote 3 bytes #0 wrote 3 bytes 6 B #0 wrote 3 bytes #0 wrote 3 bytes 6 B cstream-3.0.0/tests/test1.log30000644040216600116100000000070007014510434013056 00000000000000Testing with options -c 1 bla bla bla bla bla bla bla bla 6 0 6 1 1 1 Testing with options -c 2 bla bla bla bla bla bla bla bla 6 0 6 1 1 1 Testing with options -c 3 bla bla bla bla bla bla bla bla 6 0 6 1 1 1 Testing with options -c 4 bla bla bla bla bla bla bla bla 6 0 6 1 1 1 cstream-3.0.0/tests/test1.log40000644040216600116100000004226107014510435013070 00000000000000Testing with options -c 1 Child has pid (94148) #1 trying to read 8192 bytes #1 read 4 bytes #1 wrote 4 bytes #1 trying to read 8192 bytes #1 read 0 bytes 4 B 4.0 B 0.00 s 983 B/s 982.79 B/s Since end of first transfer: 0 B/s 0.00 B/s #0 trying to read 8192 bytes #0 read 4 bytes #0 wrote 4 bytes #0 trying to read 8192 bytes #0 read 0 bytes Child has pid (94151) #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 0 bytes 4 B 4.0 B 0.00 s 834 B/s 834.21 B/s Since end of first transfer: 2959 B/s 2.89 KB/s #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 0 bytes Child has pid (94154) #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 0 bytes #1 wrote 1 bytes #1 wrote 1 bytes #1 wrote 1 bytes #1 wrote 1 bytes 4 B 4.0 B 0.00 s 803 B/s 802.74 B/s Since end of first transfer: 10002 B/s 9.77 KB/s #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 0 bytes Child has pid (94157) #1 trying to read 2 bytes #1 read 2 bytes #1 trying to read 2 bytes #1 read 2 bytes #1 trying to read 2 bytes #1 read 0 bytes #1 wrote 2 bytes #1 wrote 2 bytes 4 B 4.0 B 0.00 s 945 B/s 944.74 B/s Since end of first transfer: 17867 B/s 17.45 KB/s #0 trying to read 2 bytes #0 read 2 bytes #0 wrote 2 bytes #0 trying to read 2 bytes #0 read 2 bytes #0 wrote 2 bytes #0 trying to read 2 bytes #0 read 0 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 6243 B/s 6.10 KB/s 0 lines Since end of first transfer: 331129 B/s 323.37 KB/s #0 trying to read 3 bytes #0 read 0 bytes 0 B 0.0 B 0.00 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 1.00 B/s #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 6142 B/s 6.00 KB/s 1 lines Since end of first transfer: 335544 B/s 327.68 KB/s Child has pid (94174) #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 0 bytes #1 wrote 3 bytes #1 wrote 3 bytes 6 B 6.0 B 0.00 s 1363 B/s 1.33 KB/s 0 lines Since end of first transfer: 20005 B/s 19.54 KB/s #0 trying to read 3 bytes #0 read 3 bytes #0 wrote 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 wrote 3 bytes Child has pid (94177) #1 trying to read 3 bytes #1 read 0 bytes 0 B 0.0 B 0.00 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 1.00 B/s #0 trying to read 3 bytes #0 read 0 bytes Child has pid (94180) #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 0 bytes #1 wrote 3 bytes #1 wrote 3 bytes 6 B 6.0 B 0.00 s 1375 B/s 1.34 KB/s 1 lines Since end of first transfer: 24576 B/s 24.00 KB/s #0 trying to read 3 bytes #0 read 3 bytes #0 wrote 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 21979 B/s 21.46 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s 6 B 6.0 B 0.00 s 22390 B/s 21.86 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s 6 B 6.0 B 0.00 s 17963 B/s 17.54 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6128 B/s 5.98 KB/s 1 lines Since end of first transfer: 27031 B/s 26.40 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 4633 B/s 4.52 KB/s 1 lines Since end of first transfer: 8595 B/s 8.39 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6487 B/s 6.33 KB/s 1 lines Since end of first transfer: 25216 B/s 24.63 KB/s Testing with options -c 2 Child has pid (94203) #1 trying to read 8192 bytes #1 read 4 bytes #1 wrote 4 bytes #1 trying to read 8192 bytes #1 read 0 bytes 4 B 4.0 B 0.00 s 966 B/s 965.71 B/s Since end of first transfer: 0 B/s 0.00 B/s #0 trying to read 8192 bytes #0 read 4 bytes #0 wrote 4 bytes #0 trying to read 8192 bytes #0 read 0 bytes Child has pid (94206) #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 0 bytes 4 B 4.0 B 0.00 s 811 B/s 811.36 B/s Since end of first transfer: 2846 B/s 2.78 KB/s #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 0 bytes Child has pid (94209) #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 0 bytes 4 B 4.0 B 0.00 s 810 B/s 809.89 B/s Since end of first transfer: 2791 B/s 2.73 KB/s #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #0 read 0 bytes #0 wrote 1 bytes #0 wrote 1 bytes #0 wrote 1 bytes #0 wrote 1 bytes Child has pid (94212) #1 trying to read 2 bytes #1 read 2 bytes #1 wrote 2 bytes #1 trying to read 2 bytes #1 read 2 bytes #1 wrote 2 bytes #1 trying to read 2 bytes #0 trying to read 2 bytes #0 read 2 bytes #0 trying to read 2 bytes #0 read 2 bytes #0 trying to read 2 bytes #1 read 0 bytes 4 B 4.0 B 0.01 s 554 B/s 553.64 B/s Since end of first transfer: 583 B/s 582.93 B/s #0 read 0 bytes #0 wrote 2 bytes #0 wrote 2 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 5988 B/s 5.85 KB/s 0 lines Since end of first transfer: 375609 B/s 366.81 KB/s #0 trying to read 3 bytes #0 read 0 bytes 0 B 0.0 B 0.00 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 1.00 B/s #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 6079 B/s 5.94 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s Child has pid (94229) #1 trying to read 3 bytes #1 read 3 bytes #1 wrote 3 bytes #1 trying to read 3 bytes #1 read 3 bytes #1 wrote 3 bytes 6 B 6.0 B 0.00 s 1573 B/s 1.54 KB/s 0 lines Since end of first transfer: 9583 B/s 9.36 KB/s #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes #0 wrote 3 bytes #0 wrote 3 bytes Child has pid (94232) #1 trying to read 3 bytes #1 read 0 bytes 0 B 0.0 B 0.00 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 1.00 B/s #0 trying to read 3 bytes #0 read 0 bytes Child has pid (94235) #1 trying to read 3 bytes #1 read 3 bytes #1 wrote 3 bytes #1 trying to read 3 bytes #1 read 3 bytes #1 wrote 3 bytes 6 B 6.0 B 0.00 s 1488 B/s 1.45 KB/s 1 lines Since end of first transfer: 9010 B/s 8.80 KB/s #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 18752 B/s 18.31 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s 6 B 6.0 B 0.00 s 18809 B/s 18.37 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s 6 B 6.0 B 0.00 s 18690 B/s 18.25 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6302 B/s 6.15 KB/s 1 lines Since end of first transfer: 27265 B/s 26.63 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6445 B/s 6.29 KB/s 1 lines Since end of first transfer: 26324 B/s 25.71 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6711 B/s 6.55 KB/s 1 lines Since end of first transfer: 27777 B/s 27.13 KB/s Testing with options -c 3 #0 trying to read 8192 bytes Child has pid (94258) #1 trying to read 8192 bytes #1 read 4 bytes #0 read 4 bytes #0 wrote 4 bytes #0 trying to read 8192 bytes #1 wrote 4 bytes #1 trying to read 8192 bytes #1 read 0 bytes 4 B 4.0 B 0.01 s 446 B/s 445.98 B/s Since end of first transfer: 0 B/s 0.00 B/s #0 read 0 bytes Child has pid (94261) #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 wrote 1 bytes #1 trying to read 1 bytes #1 read 0 bytes 4 B 4.0#0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes #0 read 1 bytes #0 wrote 1 bytes #0 trying to read 1 bytes B 0.01 s 797 B/s 796.81 B/s Since end of first transfer: 2379 B/s 2.32 KB/s #0 read 0 bytes #0 trying to read 1 bytes Child has pid (94264) #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 1 bytes #1 trying to read 1 bytes #1 read 0 bytes #0 read 1 bytes #0 trying to read 1 bytes #1 wrote 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #1 wrote 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #1 wrote 1 bytes #0 read 1 bytes #0 trying to read 1 bytes #1 wrote 1 bytes 4 B 4.0 B 0.01 s 386 B/s 386.10 B/s Since end of first transfer: 2747 B/s 2.68 KB/s #0 read 0 bytes #0 wrote 1 bytes #0 wrote 1 bytes #0 wrote 1 bytes #0 wrote 1 bytes Child has pid (94267) #0 trying to read 2 bytes #1 trying to read 2 bytes #1 read 2 bytes #1 trying to read 2 bytes #1 read 2 bytes #1 trying to read 2 bytes #1 read 0 bytes #0 read 2 bytes #0 trying to read 2 bytes #1 wrote 2 bytes #0 read 2 bytes #0 trying to read 2 bytes #1 wrote 2 bytes 4 B 4.0 B 0.01 s 538 B/s 537.64 B/s Since end of first transfer: 5479 B/s 5.35 KB/s #0 read 0 bytes #0 wrote 2 bytes #0 wrote 2 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 5842 B/s 5.71 KB/s 0 lines Since end of first transfer: 375609 B/s 366.81 KB/s #0 trying to read 3 bytes #0 read 0 bytes 0 B 0.0 B 0.00 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 1.00 B/s #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 6066 B/s 5.92 KB/s 1 lines Since end of first transfer: 370086 B/s 361.41 KB/s Child has pid (94284) #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 0 bytes #1 wrote 3 bytes #1 wrote 3 bytes 6 B 6.0 B 0.00 s 1353 B/s 1.32 KB/s 0 lines #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes Since end of first transfer: 26324 B/s 25.71 KB/s #0 wrote 3 bytes #0 wrote 3 bytes Child has pid (94287) #1 trying to read 3 bytes #1 read 0 bytes 0 B 0.0 B 0.01 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 0.99 B/s #0 trying to read 3 bytes #0 read 0 bytes #0 trying to read 3 bytes Child has pid (94290) #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 3 bytes #1 trying to read 3 bytes #1 read 0 bytes #0 read 3 bytes #0 trying to read 3 bytes #1 wrote 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes #0 wrote 3 bytes #0 wrote 3 bytes #1 wrote 3 bytes 6 B 6.0 B 0.02 s 300 B/s 300.03 B/s 1 lines Since end of first transfer: 406 B/s 405.73 B/s 6 B 6.0 B 0.00 s 18634 B/s 18.20 KB/s 1 lines Since end of first transfer: 331129 B/s 323.37 KB/s 6 B 6.0 B 0.00 s 18986 B/s 18.54 KB/s 1 lines Since end of first transfer: 375609 B/s 366.81 KB/s 6 B 6.0 B 0.00 s 17963 B/s 17.54 KB/s 1 lines Since end of first transfer: 335544 B/s 327.68 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 5420 B/s 5.29 KB/s 1 lines Since end of first transfer: 15621 B/s 15.26 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 5333 B/s 5.21 KB/s 1 lines Since end of first transfer: 15458 B/s 15.10 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 3492 B/s 3.41 KB/s 1 lines Since end of first transfer: 15621 B/s 15.26 KB/s Testing with options -c 4 Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 4 bytes Polling, want_to_read 0 want_to_write 1 Poll returned 1 Trying to write 4 bytes Wrote 4 bytes Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 0 bytes 4 B 4.0 B 0.00 s 1157 B/s 1.13 KB/s Since end of first transfer: 5 B/s 4.98 B/s Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 1 bytes Polling, want_to_read 0 want_to_write 1 Poll returned 1 Trying to write 1 bytes Wrote 1 bytes Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 1 bytes Polling, want_to_read 0 want_to_write 1 Poll returned 1 Trying to write 1 bytes Wrote 1 bytes Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 1 bytes Polling, want_to_read 0 want_to_write 1 Poll returned 1 Trying to write 1 bytes Wrote 1 bytes Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 1 bytes Polling, want_to_read 0 want_to_write 1 Poll returned 1 Trying to write 1 bytes Wrote 1 bytes Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 0 bytes 4 B 4.0 B 0.00 s 949 B/s 948.54 B/s Since end of first transfer: 5 B/s 4.98 B/s Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 1 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 1 bytes Wrote 1 bytes Trying to read Read 1 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 1 bytes Wrote 1 bytes Trying to read Read 1 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 1 bytes Wrote 1 bytes Trying to read Read 1 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 1 bytes Wrote 1 bytes Trying to read Read 0 bytes 4 B 4.0 B 0.00 s 1074 B/s 1.05 KB/s Since end of first transfer: 5 B/s 4.98 B/s Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 2 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 2 bytes Wrote 2 bytes Trying to read Read 2 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 2 bytes Wrote 2 bytes Trying to read Read 0 bytes 4 B 4.0 B 0.00 s 1610 B/s 1.57 KB/s Since end of first transfer: 5 B/s 4.99 B/s #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 5296 B/s 5.17 KB/s 0 lines Since end of first transfer: 303203 B/s 296.10 KB/s #0 trying to read 3 bytes #0 read 0 bytes 0 B 0.0 B 0.00 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 1.00 B/s #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 3 bytes #0 trying to read 3 bytes #0 read 0 bytes 6 B 6.0 B 0.00 s 5959 B/s 5.82 KB/s 1 lines Since end of first transfer: 335544 B/s 327.68 KB/s Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 3 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 3 bytes Wrote 3 bytes Trying to read Read 3 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 3 bytes Wrote 3 bytes Trying to read Read 0 bytes 6 B 6.0 B 0.00 s 2629 B/s 2.57 KB/s 0 lines Since end of first transfer: 7 B/s 6.98 B/s Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 0 bytes 0 B 0.0 B 0.00 s 0 B/s 0.00 B/s 0 lines Since end of first transfer: 1 B/s 1.00 B/s Polling, want_to_read 1 want_to_write 0 Poll returned 1 Trying to read Read 3 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 3 bytes Wrote 3 bytes Trying to read Read 3 bytes Polling, want_to_read 1 want_to_write 1 Poll returned 2 Trying to write 3 bytes Wrote 3 bytes Trying to read Read 0 bytes 6 B 6.0 B 0.00 s 2709 B/s 2.65 KB/s 0 lines Since end of first transfer: 7 B/s 6.98 B/s 6 B 6.0 B 0.00 s 16389 B/s 16.01 KB/s 1 lines Since end of first transfer: 331129 B/s 323.37 KB/s 6 B 6.0 B 0.00 s 18518 B/s 18.08 KB/s 1 lines Since end of first transfer: 335544 B/s 327.68 KB/s 6 B 6.0 B 0.00 s 18403 B/s 17.97 KB/s 1 lines Since end of first transfer: 331129 B/s 323.37 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6263 B/s 6.12 KB/s 1 lines Since end of first transfer: 27295 B/s 26.66 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6438 B/s 6.29 KB/s 1 lines Since end of first transfer: 25016 B/s 24.43 KB/s #0 wrote 3 bytes #0 wrote 3 bytes 6 B 6.0 B 0.00 s 6494 B/s 6.34 KB/s 1 lines Since end of first transfer: 27265 B/s 26.63 KB/s