diagnostics-0.3.3/0000755000076500000240000000000011567507566011045 500000000000000diagnostics-0.3.3/aclocal.m40000644000076500000240000011657111567506164012631 00000000000000# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, [m4_warning([this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) # only at the first occurence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])# PKG_CHECK_MODULES # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl dnl The `parallel-tests' driver may need to know about EXEEXT, so add the dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/ac_archive.m4]) m4_include([m4/ac_doxygen.m4]) m4_include([m4/argz.m4]) m4_include([m4/libtool.m4]) m4_include([m4/ltdl.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) diagnostics-0.3.3/AUTHORS0000644000076500000240000000000010553745653012016 00000000000000diagnostics-0.3.3/ChangeLog0000644000076500000240000000542511567507172012536 000000000000002011-05-26 Michael Tautschnig * traceback_handler.cpp: don't use GCC private header * posix.cpp: portable use of realpath * stacktrace.t.cpp: Disable one test on kfreebsd 2011-02-28 Michael Tautschnig * platform.hpp: Proper #include for current ACE 2011-01-11 Michael Tautschnig * blind_test_run_result.ts.cpp: Use string::size_type instead of int for proper unsigned comparison * throwing_block_annotation.t.cpp: Use strcmp for char* comparison 2009-09-09 Michael Tautschnig * invariance_annotation.t.cpp: Reverted "m_throw is volatile" as it doesn't affect recent GCC anymore 2010-05-27 Michael Tautschnig * configure.ac: Forcibly disable stacktrace on ARM 2010-02-14 Michael Tautschnig * file_test_data_source.cpp: Open test.dat in binary mode * stream_test_system_main.hpp: Disable * command line expansion in MinGW/Msys 2010-02-13 Michael Tautschnig * config/runtest.sh: Use automake TESTS target with wrapper script instead of check-local:: override 2010-02-12 Michael Tautschnig * extensions/stacktrace/: Added Florian Weimer's stacktrace generation code (Linux-only) 2010-02-11 Michael Tautschnig * load_symbol.cpp, configure.ac: Use libltdl API instead of directly using dlopen * pp_config: MinGW compatibility * configure.ac: Don't fail if pkg-config is not found, just disable ACE 2010-01-16 Michael Tautschnig * stream_test_system.cpp: Fixed typo "unkown" 2009-04-18 Michael Tautschnig * *.hpp, *.cpp: Updated copyright information * configure.ac: Added -Wno-portability to autoreconf options to silence GNU make warnings 2009-02-22 Michael Tautschnig * basic_exceptions/: Added useful exceptions for users of diagnostics * invariance_annotation.t.cpp: Made m_throw volatile to fix FTBFS on s390 because of (reported) bug in GCC 2008-01-23 Michael Tautschnig * stream_test_system.cpp: #include cstring to fix FTBFS with gcc 4.3 2007-12-23 Michael Tautschnig * diff_generator.cpp: Check for possible overflows 2007-12-16 Michael Tautschnig * load_symbol.cpp: #include cstdlib to fix FTBFS with gcc 4.3 * lib_annotations.hpp: Merged back changes/improvements done in several projects that use diagnostics * stream_test_data_adaptor.cpp: Added info on what the letters mean to all situations * diff_generator.cpp, diff.t.cpp: Rewrote the LCSS code to fix the broken diffs * stream_test_system.cpp: Test for a sufficient number of arguments before calling strcmp, added -h and help message 2007-03-07 Michael Tautschnig * Prepared for first public release diagnostics-0.3.3/config/0000755000076500000240000000000011567507566012312 500000000000000diagnostics-0.3.3/config/config.guess0000744000076500000240000012761511567507572014561 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. timestamp='2009-11-20' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner. Please send patches (context # diff format) to and include a ChangeLog # entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux${UNAME_RELEASE} exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[456]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-gnu else echo ${UNAME_MACHINE}-unknown-linux-gnueabi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; i*86:Linux:*:*) LIBC=gnu eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; padre:Linux:*:*) echo sparc-unknown-linux-gnu exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in i386) eval $set_cc_for_build if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then UNAME_PROCESSOR="x86_64" fi fi ;; unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: diagnostics-0.3.3/config/config.sub0000744000076500000240000010316711567507572014220 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. timestamp='2009-11-20' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted GNU ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | ubicom32 \ | v850 | v850e \ | we32k \ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12 | picochip) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze) basic_machine=microblaze-xilinx ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tile*) basic_machine=tile-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: diagnostics-0.3.3/config/depcomp0000744000076500000240000004426711567507572013617 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2009-04-28.21; # UTC # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free # Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u="sed s,\\\\\\\\,/,g" depmode=msvisualcpp fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: diagnostics-0.3.3/config/doxygen.cfg0000644000076500000240000014421510553745653014372 00000000000000# Doxyfile 1.4.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project # # All text after a hash (#) is considered a comment and will be ignored # The format is: # TAG = value [value, ...] # For lists items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (" ") #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- # The PROJECT_NAME tag is a single word (or a sequence of words surrounded # by quotes) that should identify the project. PROJECT_NAME = $(PROJECT) # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or # if some version control system is used. PROJECT_NUMBER = $(VERSION) # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. # If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. OUTPUT_DIRECTORY = $(DOCDIR) # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create # 4096 sub-directories (in 2 levels) under the output directory of each output # format and will distribute the generated files over these directories. # Enabling this option can be useful when feeding doxygen a huge amount of # source files, where putting all generated files in the same directory would # otherwise cause performance problems for the file system. CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # The default language is English, other supported languages are: # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, # Swedish, and Ukrainian. OUTPUT_LANGUAGE = English # This tag can be used to specify the encoding used in the generated output. # The encoding is not always determined by the language that is chosen, # but also whether or not the output is meant for Windows or non-Windows users. # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES # forces the Windows encoding (this is the default for the Windows binary), # whereas setting the tag to NO uses a Unix-style encoding (the default for # all platforms other than Windows). USE_WINDOWS_ENCODING = NO # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # include brief member descriptions after the members that are listed in # the file and class documentation (similar to JavaDoc). # Set to NO to disable this. BRIEF_MEMBER_DESC = YES # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend # the brief description of a member or function before the detailed description. # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. REPEAT_BRIEF = YES # This tag implements a quasi-intelligent brief description abbreviator # that is used to form the text in various listings. Each string # in this list, if found as the leading text of the brief description, will be # stripped from the text and the result after processing the whole list, is # used as the annotated text. Otherwise, the brief description is used as-is. # If left blank, the following values are used ("$name" is automatically # replaced with the name of the entity): "The $name class" "The $name widget" # "The $name file" "is" "provides" "specifies" "contains" # "represents" "a" "an" "the" ABBREVIATE_BRIEF = # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # Doxygen will generate a detailed section even if there is only a brief # description. ALWAYS_DETAILED_SEC = NO # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all # inherited members of a class in the documentation of that class as if those # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. INLINE_INHERITED_MEMB = NO # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full # path before files name in the file list and in the header files. If set # to NO the shortest path that makes the file name unique will be used. FULL_PATH_NAMES = YES # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag # can be used to strip a user-defined part of the path. Stripping is # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the # path to strip. STRIP_FROM_PATH = $(SRCDIR) # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of # the path mentioned in the documentation of a class, which tells # the reader which header file to include in order to use a class. # If left blank only the name of the header file containing the class # definition is used. Otherwise one should specify the include paths that # are normally passed to the compiler using the -I flag. STRIP_FROM_INC_PATH = $(SRCDIR) # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter # (but less readable) file names. This can be useful is your file systems # doesn't support long names like on DOS, Mac, or CD-ROM. SHORT_NAMES = NO # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen # will interpret the first line (until the first dot) of a JavaDoc-style # comment as the brief description. If set to NO, the JavaDoc # comments will behave just like the Qt-style comments (thus requiring an # explicit @brief command for a brief description. JAVADOC_AUTOBRIEF = NO # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen # treat a multi-line C++ special comment block (i.e. a block of //! or /// # comments) as a brief description. This used to be the default behaviour. # The new default is to treat a multi-line C++ comment block as a detailed # description. Set this tag to YES if you prefer the old behaviour instead. MULTILINE_CPP_IS_BRIEF = NO # If the DETAILS_AT_TOP tag is set to YES then Doxygen # will output the detailed description near the top, like JavaDoc. # If set to NO, the detailed description appears after the member # documentation. DETAILS_AT_TOP = YES # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented # member inherits the documentation from any documented member that it # re-implements. INHERIT_DOCS = YES # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce # a new page for each member. If set to NO, the documentation of a member will # be part of the file/class/namespace that contains it. SEPARATE_MEMBER_PAGES = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. TAB_SIZE = 8 # This tag can be used to specify a number of aliases that acts # as commands in the documentation. An alias has the form "name=value". # For example adding "sideeffect=\par Side Effects:\n" will allow you to # put the command \sideeffect (or @sideeffect) in the documentation, which # will result in a user-defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. ALIASES = # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C # sources only. Doxygen will then generate output that is more tailored for C. # For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = NO # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java # sources only. Doxygen will then generate output that is more tailored for Java. # For instance, namespaces will be presented as packages, qualified scopes # will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to # include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. # func(std::string) {}). This also make the inheritance and collaboration # diagrams that involve STL classes more complete and accurate. BUILTIN_STL_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES, then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. DISTRIBUTE_GROUP_DOC = NO # Set the SUBGROUPING tag to YES (the default) to allow class member groups of # the same type (for instance a group of public functions) to be put as a # subgroup of that type (e.g. under the Public Functions section). Set it to # NO to prevent subgrouping. Alternatively, this can be done per class using # the \nosubgrouping command. SUBGROUPING = YES #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES # If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. EXTRACT_PRIVATE = YES # If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. EXTRACT_STATIC = YES # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) # defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. EXTRACT_LOCAL_CLASSES = YES # This flag is only useful for Objective-C code. When set to YES local # methods, which are defined in the implementation section but not in # the interface are included in the documentation. # If set to NO (the default) only methods in the interface are included. EXTRACT_LOCAL_METHODS = NO # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # undocumented members of documented classes, files or namespaces. # If set to NO (the default) these members will be included in the # various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. # If set to NO (the default) these classes will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all # friend (class|struct|union) declarations. # If set to NO (the default) these declarations will be included in the # documentation. HIDE_FRIEND_COMPOUNDS = NO # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # documentation blocks found inside the body of a function. # If set to NO (the default) these blocks will be appended to the # function's detailed documentation block. HIDE_IN_BODY_DOCS = NO # The INTERNAL_DOCS tag determines if documentation # that is typed after a \internal command is included. If the tag is set # to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. INTERNAL_DOCS = NO # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate # file names in lower-case letters. If set to YES upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = NO # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = NO # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen # will put a list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = YES # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. INLINE_INFO = YES # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen # will sort the (detailed) documentation of file and class members # alphabetically by member name. If set to NO the members will appear in # declaration order. SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the # brief documentation of file, namespace and class members alphabetically # by member name. If set to NO (the default) the members will appear in # declaration order. SORT_BRIEF_DOCS = NO # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be # sorted by fully-qualified names, including namespaces. If set to # NO (the default), the class list will be sorted only by class name, # not including the namespace part. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. # Note: This option applies only to the class list, not to the # alphabetical list. SORT_BY_SCOPE_NAME = NO # The GENERATE_TODOLIST tag can be used to enable (YES) or # disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. GENERATE_TODOLIST = YES # The GENERATE_TESTLIST tag can be used to enable (YES) or # disable (NO) the test list. This list is created by putting \test # commands in the documentation. GENERATE_TESTLIST = YES # The GENERATE_BUGLIST tag can be used to enable (YES) or # disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. GENERATE_BUGLIST = YES # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or # disable (NO) the deprecated list. This list is created by putting # \deprecated commands in the documentation. GENERATE_DEPRECATEDLIST= YES # The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines # the initial value of a variable or define consists of for it to appear in # the documentation. If the initializer consists of more lines than specified # here it will be hidden. Use a value of 0 to hide initializers completely. # The appearance of the initializer of individual variables and defines in the # documentation can be controlled using \showinitializer or \hideinitializer # command in the documentation regardless of this setting. MAX_INITIALIZER_LINES = 30 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated # at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. SHOW_USED_FILES = YES # If the sources in your project are distributed over multiple directories # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy # in the documentation. The default is NO. SHOW_DIRECTORIES = YES # The FILE_VERSION_FILTER tag can be used to specify a program or script that # doxygen should invoke to get the current version for each file (typically from the # version control system). Doxygen will invoke the program by executing (via # popen()) the command , where is the value of # the FILE_VERSION_FILTER tag, and is the name of an input file # provided by doxygen. Whatever the program writes to standard output # is used as the file version. See the manual for examples. FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- # The QUIET tag can be used to turn on/off the messages that are generated # by doxygen. Possible values are YES and NO. If left blank NO is used. QUIET = NO # The WARNINGS tag can be used to turn on/off the warning messages that are # generated by doxygen. Possible values are YES and NO. If left blank # NO is used. WARNINGS = YES # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings # for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. WARN_IF_UNDOCUMENTED = YES # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for # potential errors in the documentation, such as not documenting some # parameters in a documented function, or documenting parameters that # don't exist or using markup commands wrongly. WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be abled to get warnings for # functions that are documented, but have no documentation for their parameters # or return value. If set to NO (the default) doxygen will only warn about # wrong or incomplete parameter documentation, but not about the absence of # documentation. WARN_NO_PARAMDOC = NO # The WARN_FORMAT tag determines the format of the warning messages that # doxygen can produce. The string should contain the $file, $line, and $text # tags, which will be replaced by the file and line number from which the # warning originated and the warning text. Optionally the format may contain # $version, which will be replaced by the version of the file (if it could # be obtained via FILE_VERSION_FILTER) WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning # and error messages should be written. If left blank the output is written # to stderr. WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- # The INPUT tag can be used to specify the files and/or directories that contain # documented source files. You may enter file names like "myfile.cpp" or # directories like "/usr/src/myproject". Separate the files or directories # with spaces. INPUT = $(SRCDIR)/diagnostics # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm FILE_PATTERNS = # The RECURSIVE tag can be used to turn specify whether or not subdirectories # should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. RECURSIVE = YES # The EXCLUDE tag can be used to specify files and/or directories that should # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used select whether or not files or # directories that are symbolic links (a Unix filesystem feature) are excluded # from the input. EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # certain files from those directories. Note that the wildcards are matched # against the file with absolute path, so to exclude all test directories # for example use the pattern */test/* EXCLUDE_PATTERNS = # The EXAMPLE_PATH tag can be used to specify one or more files or # directories that contain example code fragments that are included (see # the \include command). EXAMPLE_PATH = # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank all files are included. EXAMPLE_PATTERNS = # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # searched for input files to be used with the \include or \dontinclude # commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. EXAMPLE_RECURSIVE = NO # The IMAGE_PATH tag can be used to specify one or more files or # directories that contain image that are included in the documentation (see # the \image command). IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program # by executing (via popen()) the command , where # is the value of the INPUT_FILTER tag, and is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. If FILTER_PATTERNS is specified, this tag will be # ignored. INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern # basis. Doxygen will compare the file name with each pattern and apply the # filter if there is a match. The filters are a list of the form: # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER # is applied to all files. FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- # If the SOURCE_BROWSER tag is set to YES then a list of source files will # be generated. Documented entities will be cross-referenced with these sources. # Note: To get rid of all source code in the generated output, make sure also # VERBATIM_HEADERS is set to NO. SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code # fragments. Normal C and C++ comments will always remain visible. STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES (the default) # then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = YES # If the REFERENCES_RELATION tag is set to YES (the default) # then for each documented function all documented entities # called/used by that function will be listed. REFERENCES_RELATION = YES # If the USE_HTAGS tag is set to YES then the references to source code # will point to the HTML generated by the htags(1) tool instead of doxygen # built-in source browser. The htags tool is part of GNU's global source # tagging system (see http://www.gnu.org/software/global/global.html). You # will need version 4.8.6 or higher. USE_HTAGS = NO # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen # will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. VERBATIM_HEADERS = YES #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index # of all compounds will be generated. Enable this if the project # contains a lot of classes, structs, unions or interfaces. ALPHABETICAL_INDEX = NO # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # in which this list will be split (can be a number in the range [1..20]) COLS_IN_ALPHA_INDEX = 5 # In case all classes in a project start with a common prefix, all # classes will be put under the same header in the alphabetical index. # The IGNORE_PREFIX tag can be used to specify one or more prefixes that # should be ignored while generating the index headers. IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- # If the GENERATE_HTML tag is set to YES (the default) Doxygen will # generate HTML output. GENERATE_HTML = $(GENERATE_HTML) # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `html' will be used as the default path. HTML_OUTPUT = html # The HTML_FILE_EXTENSION tag can be used to specify the file extension for # each generated HTML page (for example: .htm,.php,.asp). If it is left blank # doxygen will generate files with .html extension. HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a personal HTML header for # each generated HTML page. If it is left blank doxygen will generate a # standard header. HTML_HEADER = # The HTML_FOOTER tag can be used to specify a personal HTML footer for # each generated HTML page. If it is left blank doxygen will generate a # standard footer. HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to # fine-tune the look of the HTML output. If the tag is left blank doxygen # will generate a default style sheet. Note that doxygen will try to copy # the style sheet file to the HTML output directory, so don't put your own # stylesheet in the HTML output directory as well, or it will be erased! HTML_STYLESHEET = # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, # files or namespaces will be aligned in HTML using tables. If set to # NO a bullet list will be used. HTML_ALIGN_MEMBERS = YES # If the GENERATE_HTMLHELP tag is set to YES, additional index files # will be generated that can be used as input for tools like the # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = $(GENERATE_CHM) # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # be used to specify the file name of the resulting .chm file. You # can add a path in front of the file if the result should not be # written to the html output directory. CHM_FILE = ../$(PROJECT).chm # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can # be used to specify the location (absolute path including file name) of # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler on the generated index.hhp. HHC_LOCATION = $(HHC_PATH) # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag # controls if a separate .chi index file is generated (YES) or that # it should be included in the master .chm file (NO). GENERATE_CHI = $(GENERATE_CHI) # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. BINARY_TOC = NO # The TOC_EXPAND flag can be set to YES to add extra items for group members # to the contents of the HTML help documentation and to the tree view. TOC_EXPAND = NO # The DISABLE_INDEX tag can be used to turn on/off the condensed index at # top of each HTML page. The value NO (the default) enables the index and # the value YES disables it. DISABLE_INDEX = NO # This tag can be used to set the number of enum values (range [1..20]) # that doxygen will group on one line in the generated HTML documentation. ENUM_VALUES_PER_LINE = 4 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be # generated containing a tree-like index structure (just like the one that # is generated for HTML Help). For this to work a browser that supports # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # probably better off using the HTML help feature. GENERATE_TREEVIEW = YES # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. GENERATE_LATEX = $(GENERATE_LATEX) # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `latex' will be used as the default path. LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. If left blank `latex' will be used as the default command name. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to # generate index for LaTeX. If left blank `makeindex' will be used as the # default command name. MAKEINDEX_CMD_NAME = makeindex # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact # LaTeX documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, a4wide, letter, legal and # executive. If left blank a4wide will be used. PAPER_TYPE = $(PAPER_SIZE) # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. EXTRA_PACKAGES = # The LATEX_HEADER tag can be used to specify a personal LaTeX header for # the generated latex document. The header should contain everything until # the first chapter. If it is left blank doxygen will generate a # standard header. Notice: only use this tag if you know what you are doing! LATEX_HEADER = # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. PDF_HYPERLINKS = NO # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. USE_PDFLATEX = NO # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. # command to the generated LaTeX files. This will instruct LaTeX to keep # running if errors occur, instead of asking the user for help. # This option is also used when generating formulas in HTML. LATEX_BATCHMODE = YES # If LATEX_HIDE_INDICES is set to YES then doxygen will not # include the index chapters (such as File Index, Compound Index, etc.) # in the output. LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output # The RTF output is optimized for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = $(GENERATE_RTF) # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `rtf' will be used as the default path. RTF_OUTPUT = rtf # If the COMPACT_RTF tag is set to YES Doxygen generates more compact # RTF documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_RTF = NO # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # will contain hyperlink fields. The RTF file will # contain links (just like the HTML output) instead of page references. # This makes the output suitable for online browsing using WORD or other # programs which support those fields. # Note: wordpad (write) and others do not support links. RTF_HYPERLINKS = NO # Load stylesheet definitions from file. Syntax is similar to doxygen's # config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an rtf document. # Syntax is similar to doxygen's config file. RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- # If the GENERATE_MAN tag is set to YES (the default) Doxygen will # generate man pages GENERATE_MAN = $(GENERATE_MAN) # The MAN_OUTPUT tag is used to specify where the man pages will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `man' will be used as the default path. MAN_OUTPUT = man # The MAN_EXTENSION tag determines the extension that is added to # the generated man pages (default is the subroutine's section .3) MAN_EXTENSION = .3 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, # then it will generate one additional man file for each entity # documented in the real man page(s). These additional files # only source the real man page, but without them the man command # would be unable to find the correct page. The default is NO. MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- # If the GENERATE_XML tag is set to YES Doxygen will # generate an XML file that captures the structure of # the code including all documentation. GENERATE_XML = $(GENERATE_XML) # The XML_OUTPUT tag is used to specify where the XML pages will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `xml' will be used as the default path. XML_OUTPUT = xml # The XML_SCHEMA tag can be used to specify an XML schema, # which can be used by a validating XML parser to check the # syntax of the XML files. XML_SCHEMA = # The XML_DTD tag can be used to specify an XML DTD, # which can be used by a validating XML parser to check the # syntax of the XML files. XML_DTD = # If the XML_PROGRAMLISTING tag is set to YES Doxygen will # dump the program listings (including syntax highlighting # and cross-referencing information) to the XML output. Note that # enabling this will significantly increase the size of the XML output. XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will # generate an AutoGen Definitions (see autogen.sf.net) file # that captures the structure of the code including all # documentation. Note that this feature is still experimental # and incomplete at the moment. GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- # If the GENERATE_PERLMOD tag is set to YES Doxygen will # generate a Perl module file that captures the structure of # the code including all documentation. Note that this # feature is still experimental and incomplete at the # moment. GENERATE_PERLMOD = NO # If the PERLMOD_LATEX tag is set to YES Doxygen will generate # the necessary Makefile rules, Perl scripts and LaTeX code to be able # to generate PDF and DVI output from the Perl module output. PERLMOD_LATEX = NO # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be # nicely formatted so it can be parsed by a human reader. This is useful # if you want to understand what is going on. On the other hand, if this # tag is set to NO the size of the Perl module output will be much smaller # and Perl will parse it just the same. PERLMOD_PRETTY = YES # The names of the make variables in the generated doxyrules.make file # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. # This is useful so different doxyrules.make files included by the same # Makefile don't overwrite each other's variables. PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will # evaluate all C-preprocessor directives found in the sources and include # files. ENABLE_PREPROCESSING = YES # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro # names in the source code. If set to NO (the default) only conditional # compilation will be performed. Macro expansion can be done in a controlled # way by setting EXPAND_ONLY_PREDEF to YES. MACRO_EXPANSION = YES # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # then the macro expansion is limited to the macros specified with the # PREDEFINED and EXPAND_AS_DEFINED tags. EXPAND_ONLY_PREDEF = NO # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # in the INCLUDE_PATH (see below) will be search if a #include is found. SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by # the preprocessor. INCLUDE_PATH = # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the # directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. INCLUDE_FILE_PATTERNS = # The PREDEFINED tag can be used to specify one or more macro names that # are defined before the preprocessor is started (similar to the -D option of # gcc). The argument of the tag is a list of macros of the form: name # or name=definition (no spaces). If the definition and the = are # omitted =1 is assumed. To prevent a macro definition from being # undefined via #undef or recursively expanded use the := operator # instead of the = operator. PREDEFINED = # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. # The macro definition that is found in the sources will be used. # Use the PREDEFINED tag if you want to use a different macro definition. EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # doxygen's preprocessor will remove all function-like macros that are alone # on a line, have an all uppercase name, and do not end with a semicolon. Such # function macros are typically used for boiler-plate code, and will confuse # the parser if not removed. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- # The TAGFILES option can be used to specify one or more tagfiles. # Optionally an initial location of the external documentation # can be added for each tagfile. The format of a tag file without # this location is as follows: # TAGFILES = file1 file2 ... # Adding location for the tag files is done as follows: # TAGFILES = file1=loc1 "file2 = loc2" ... # where "loc1" and "loc2" can be relative or absolute paths or # URLs. If a location is present for each tag, the installdox tool # does not have to be run to correct the links. # Note that each tag file must have a unique name # (where the name does NOT include the path) # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. TAGFILES = # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. GENERATE_TAGFILE = $(DOCDIR)/$(PROJECT).tag # If the ALLEXTERNALS tag is set to YES all external classes will be listed # in the class index. If set to NO only the inherited external classes # will be listed. ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed # in the modules index. If set to NO, only the current project's groups will # be listed. EXTERNAL_GROUPS = YES # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). PERL_PATH = $(PERL_PATH) #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base # or super classes. Setting the tag to NO turns the diagrams off. Note that # this option is superseded by the HAVE_DOT option below. This is only a # fallback. It is recommended to install and use dot, since it yields more # powerful graphs. CLASS_DIAGRAMS = YES # If set to YES, the inheritance and collaboration graphs will hide # inheritance and usage relations if the target is undocumented # or is not a class. HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz, a graph visualization # toolkit from AT&T and Lucent Bell Labs. The other options in this section # have no effect if this option is set to NO (the default) HAVE_DOT = $(HAVE_DOT) # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect inheritance relations. Setting this tag to YES will force the # the CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect implementation dependencies (inheritance, containment, and # class references variables) of the class with other documented classes. COLLABORATION_GRAPH = YES # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen # will generate a graph for groups, showing the direct groups dependencies GROUP_GRAPHS = YES # If the UML_LOOK tag is set to YES doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. UML_LOOK = NO # If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. TEMPLATE_RELATIONS = YES # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT # tags are set to YES then doxygen will generate a graph for each documented # file showing the direct and indirect include dependencies of the file with # other documented files. INCLUDE_GRAPH = YES # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and # HAVE_DOT tags are set to YES then doxygen will generate a graph for each # documented header file showing the documented files that directly or # indirectly include this file. INCLUDED_BY_GRAPH = YES # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will # generate a call dependency graph for every global function or class method. # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected # functions only using the \callgraph command. CALL_GRAPH = NO # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. Possible values are png, jpg, or gif # If left blank png will be used. DOT_IMAGE_FORMAT = png # The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. DOT_PATH = $(DOT_PATH) # The DOTFILE_DIRS tag can be used to specify one or more directories that # contain dot files that are included in the documentation (see the # \dotfile command). DOTFILE_DIRS = # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width # (in pixels) of the graphs generated by dot. If a graph becomes larger than # this value, doxygen will try to truncate the graph, so that it fits within # the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_WIDTH = 1024 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height # (in pixels) of the graphs generated by dot. If a graph becomes larger than # this value, doxygen will try to truncate the graph, so that it fits within # the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_HEIGHT = 1024 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the # graphs generated by dot. A depth value of 3 means that only nodes reachable # from the root by following a path via at most 3 edges will be shown. Nodes # that lay further from the root node will be omitted. Note that setting this # option to 1 or 2 may greatly reduce the computation time needed for large # code bases. Also note that a graph may be further truncated if the graph's # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), # the graph is not depth-constrained. MAX_DOT_GRAPH_DEPTH = 0 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent # background. This is disabled by default, which results in a white background. # Warning: Depending on the platform used, enabling this option may lead to # badly anti-aliased labels on the edges of a graph (i.e. they become hard to # read). DOT_TRANSPARENT = NO # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) # support this, this feature is disabled by default. DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. GENERATE_LEGEND = YES # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will # remove the intermediate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- # The SEARCHENGINE tag specifies whether or not a search engine should be # used. If set to NO the values of all tags below this one will be ignored. SEARCHENGINE = NO diagnostics-0.3.3/config/install-sh0000744000076500000240000003253711567507572014243 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then trap '(exit $?); exit' 1 2 13 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names starting with `-'. case $src in -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # Protect names starting with `-'. case $dst in -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writeable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; -*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test -z "$d" && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: diagnostics-0.3.3/config/ltmain.sh0000755000076500000240000105017111567507572014057 00000000000000 # libtool (GNU libtool) 2.4 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008, 2009, 2010 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages # --version print version information # -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. When passed as first option, # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.4 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . # GNU libtool home page: . # General help using GNU software: . PROGRAM=libtool PACKAGE=libtool VERSION=2.4 TIMESTAMP="" package_revision=1.3293 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # NLS nuisances: We save the old values to restore during execute mode. lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL $lt_unset CDPATH # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${EGREP="grep -E"} : ${FGREP="grep -F"} : ${GREP="grep"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SED="sed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_dirname may be replaced by extended shell implementation # func_basename file func_basename () { func_basename_result=`$ECHO "${1}" | $SED "$basename"` } # func_basename may be replaced by extended shell implementation # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` } # func_dirname_and_basename may be replaced by extended shell implementation # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname may be replaced by extended shell implementation # These SED scripts presuppose an absolute path with a trailing slash. pathcar='s,^/\([^/]*\).*$,\1,' pathcdr='s,^/[^/]*,,' removedotparts=':dotsl s@/\./@/@g t dotsl s,/\.$,/,' collapseslashes='s@/\{1,\}@/@g' finalslash='s,/*$,/,' # func_normal_abspath PATH # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. # value returned in "$func_normal_abspath_result" func_normal_abspath () { # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` while :; do # Processed it all yet? if test "$func_normal_abspath_tpath" = / ; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result" ; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_relative_path SRCDIR DSTDIR # generates a relative path from SRCDIR to DSTDIR, with a trailing # slash if non-empty, suitable for immediately appending a filename # without needing to append a separator. # value returned in "$func_relative_path_result" func_relative_path () { func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=${func_dirname_result} if test "x$func_relative_path_tlibdir" = x ; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test "x$func_stripname_result" != x ; then func_relative_path_result=${func_relative_path_result}/${func_stripname_result} fi # Normalisation. If bindir is libdir, return empty string, # else relative path ending with a slash; either way, target # file name can be directly appended. if test ! -z "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result/" func_relative_path_result=$func_stripname_result fi } # The name of this program: func_dirname_and_basename "$progpath" progname=$func_basename_result # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=: for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' # Sed substitution that converts a w32 file name or path # which contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "$my_tmpdir" } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_tr_sh # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_version # Echo version message to standard output and exit. func_version () { $opt_debug $SED -n '/(C)/!b go :more /\./!{ N s/\n# / / b more } :go /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $opt_debug $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" echo $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help [NOEXIT] # Echo long help message to standard output and exit, # unless 'noexit' is passed as argument. func_help () { $opt_debug $SED -n '/^# Usage:/,/# Report bugs to/ { :print s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p d } /^# .* home page:/b print /^# General help using/b print ' < "$progpath" ret=$? if test -z "$1"; then exit $ret fi } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $opt_debug func_error "missing argument for $1." exit_cmd=exit } # func_split_short_opt shortopt # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. func_split_short_opt () { my_sed_short_opt='1s/^\(..\).*$/\1/;q' my_sed_short_rest='1s/^..\(.*\)$/\1/;q' func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` } # func_split_short_opt may be replaced by extended shell implementation # func_split_long_opt longopt # Set func_split_long_opt_name and func_split_long_opt_arg shell # variables after splitting LONGOPT at the `=' sign. func_split_long_opt () { my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^--[^=]*=//' func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` } # func_split_long_opt may be replaced by extended shell implementation exit_cmd=: magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. nonopt= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "${1}=\$${1}\${2}" } # func_append may be replaced by extended shell implementation # func_append_quoted var value # Quote VALUE and append to the end of shell variable VAR, separated # by a space. func_append_quoted () { func_quote_for_eval "${2}" eval "${1}=\$${1}\\ \$func_quote_for_eval_result" } # func_append_quoted may be replaced by extended shell implementation # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "${@}"` } # func_arith may be replaced by extended shell implementation # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` } # func_len may be replaced by extended shell implementation # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` } # func_lo2o may be replaced by extended shell implementation # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` } # func_xform may be replaced by extended shell implementation # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Option defaults: opt_debug=: opt_dry_run=false opt_config=false opt_preserve_dup_deps=false opt_features=false opt_finish=false opt_help=false opt_help_all=false opt_silent=: opt_verbose=: opt_silent=false opt_verbose=false # Parse options once, thoroughly. This comes as soon as possible in the # script to make things like `--version' happen as quickly as we can. { # this just eases exit handling while test $# -gt 0; do opt="$1" shift case $opt in --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" $opt_debug ;; --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) opt_config=: func_config ;; --dlopen|-dlopen) optarg="$1" opt_dlopen="${opt_dlopen+$opt_dlopen }$optarg" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) opt_features=: func_features ;; --finish) opt_finish=: set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help_all=: opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_mode="$optarg" case $optarg in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_silent=false func_append preserve_args " $opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" ;; --silent|--quiet) opt_silent=: func_append preserve_args " $opt" opt_verbose=false ;; --verbose|-v) opt_verbose=: func_append preserve_args " $opt" opt_silent=false ;; --tag) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_tag="$optarg" func_append preserve_args " $opt $optarg" func_enable_tag "$optarg" shift ;; -\?|-h) func_usage ;; --help) func_help ;; --version) func_version ;; # Separate optargs to long options: --*=*) func_split_long_opt "$opt" set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-n*|-v*) func_split_short_opt "$opt" set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done # Validate options: # save first non-option argument if test "$#" -gt 0; then nonopt="$opt" shift fi # preserve --debug test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test "$opt_mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$opt_mode' for more information." } # Bail if the options were screwed $exit_cmd $EXIT_FAILURE } ## ----------- ## ## Main. ## ## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case "$lt_sysroot:$1" in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result="=$func_stripname_result" ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$lt_sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $opt_debug # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result="" if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result" ; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $opt_debug if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $opt_debug # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $opt_debug if test -z "$2" && test -n "$1" ; then func_error "Could not determine host file name corresponding to" func_error " \`$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result="$1" fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $opt_debug if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " \`$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result="$3" fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $opt_debug case $4 in $1 ) func_to_host_path_result="$3$func_to_host_path_result" ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via `$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $opt_debug $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $opt_debug case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result="$1" } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via `$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $opt_debug if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd="func_convert_path_${func_stripname_result}" fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $opt_debug func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result="$1" } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_msys_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac echo $ECHO "Try \`$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test "$opt_help" = :; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | sed -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | sed '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "\`$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument \`$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and \`=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test "x$prev" = x-m && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename="" if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname" ; then func_basename "$dlprefile_dlname" dlprefile_dlbasename="$func_basename_result" else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename" ; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $opt_debug sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $opt_debug match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive which possess that section. Heuristic: eliminate # all those which have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $opt_debug if func_cygming_gnu_implib_p "$1" ; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1" ; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result="" fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" if test "$lock_old_archive_extraction" = yes; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test "$lock_old_archive_extraction" = yes; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ which is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options which match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include /* declarations of non-ANSI functions */ #if defined(__MINGW32__) # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined(__CYGWIN__) # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined (other platforms) ... */ #endif /* portability defines, excluding path handling macros */ #if defined(_MSC_VER) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC # ifndef _INTPTR_T_DEFINED # define _INTPTR_T_DEFINED # define intptr_t int # endif #elif defined(__MINGW32__) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined(__CYGWIN__) # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined (other platforms) ... */ #endif #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #if defined(LT_DEBUGWRAPPER) static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -e 's/\([\\"]\)/\\\1/g' \ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $opt_debug case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir="$arg" prev= continue ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps ; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." else echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test "$prefer_static_libs" = yes || test "$prefer_static_libs,$installed" = "built,no"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib="$l" done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$lt_sysroot$libdir" absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi case "$host" in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. func_append verstring ":${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_apped perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd1 in $cmds; do IFS="$save_ifs" # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test "$try_normal_branch" = yes \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=${output_objdir}/${output_la}.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " ${wl}-bind_at_load" func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=no ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test "x$bindir" != x ; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) func_append RM " $arg"; rmforce=yes ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then odir="$objdir" else odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" test "$opt_mode" = uninstall && odir="$dir" # Remember odir for removal later, being careful to avoid duplicates if test "$opt_mode" = clean; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case "$opt_mode" in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 diagnostics-0.3.3/config/missing0000744000076500000240000002623311567507572013632 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2009-04-28.21; # UTC # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and \`g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # normalize program name to check for. program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). This is about non-GNU programs, so use $1 not # $program. case $1 in lex*|yacc*) # Not GNU programs, they don't have --version. ;; tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit $? fi ;; makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar*) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: diagnostics-0.3.3/config/runtest.sh0000744000076500000240000000061111336277543014262 00000000000000#!/bin/sh top_srcdir=$1 DIAGNOSTICSLEVEL=$2 t=$3 mkdir -p $top_srcdir/test check_path="`pwd`" cd $top_srcdir if test x`uname -o` = xMsys ; then if test -x $check_path/.libs/$t ; then $check_path/.libs/$t run "//*" $DIAGNOSTICSLEVEL || exit $? else $check_path/$t run "//*" $DIAGNOSTICSLEVEL || exit $? fi else $check_path/$t run "/*" $DIAGNOSTICSLEVEL || exit $? fi exit 0 diagnostics-0.3.3/config.h.in0000644000076500000240000001470411567506170013004 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1, if ACE is available on your system */ #undef HAVE_ACE /* Define to 1 if you have the header file. */ #undef HAVE_ALGORITHM /* Define to 1 if you have the `argz_add' function. */ #undef HAVE_ARGZ_ADD /* Define to 1 if you have the `argz_append' function. */ #undef HAVE_ARGZ_APPEND /* Define to 1 if you have the `argz_count' function. */ #undef HAVE_ARGZ_COUNT /* Define to 1 if you have the `argz_create_sep' function. */ #undef HAVE_ARGZ_CREATE_SEP /* Define to 1 if you have the header file. */ #undef HAVE_ARGZ_H /* Define to 1 if you have the `argz_insert' function. */ #undef HAVE_ARGZ_INSERT /* Define to 1 if you have the `argz_next' function. */ #undef HAVE_ARGZ_NEXT /* Define to 1 if you have the `argz_stringify' function. */ #undef HAVE_ARGZ_STRINGIFY /* Define to 1 if you have the `atexit' function. */ #undef HAVE_ATEXIT /* Define to 1 if you have the header file. */ #undef HAVE_CASSERT /* Define to 1 if you have the `closedir' function. */ #undef HAVE_CLOSEDIR /* Define to 1 if you have the header file. */ #undef HAVE_CMATH /* Define to 1 if you have the header file. */ #undef HAVE_CSTDIO /* Define to 1 if you have the header file. */ #undef HAVE_CSTDLIB /* Define to 1 if you have the declaration of `cygwin_conv_path', and to 0 if you don't. */ #undef HAVE_DECL_CYGWIN_CONV_PATH /* Define to 1 if you have the header file. */ #undef HAVE_DIRENT_H /* Define if you have the GNU dld library. */ #undef HAVE_DLD /* Define to 1 if you have the header file. */ #undef HAVE_DLD_H /* Define to 1 if you have the `dlerror' function. */ #undef HAVE_DLERROR /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_DL_H /* Define if you have the _dyld_func_lookup function. */ #undef HAVE_DYLD /* Define to 1 if the system has the type `error_t'. */ #undef HAVE_ERROR_T /* Define to 1 if you have the header file. */ #undef HAVE_EXCEPTION /* Define to 1 if you have the header file. */ #undef HAVE_FSTREAM /* Define to 1 if you have the `gettimeofday' function. */ #undef HAVE_GETTIMEOFDAY /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_IOSTREAM /* Define if you have the libdl library or equivalent. */ #undef HAVE_LIBDL /* Define if libdlloader will be built on this platform */ #undef HAVE_LIBDLLOADER /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS /* Define to 1 if you have the header file. */ #undef HAVE_LINK_H /* Define this if a modern libltdl is already installed */ #undef HAVE_LTDL /* Define to 1 if you have the header file. */ #undef HAVE_MACH_O_DYLD_H /* Define to 1 if your system has a GNU libc compatible `malloc' function, and to 0 otherwise. */ #undef HAVE_MALLOC /* Define to 1 if you have the header file. */ #undef HAVE_MAP /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `opendir' function. */ #undef HAVE_OPENDIR /* Define if libtool can extract symbol lists from object files. */ #undef HAVE_PRELOADED_SYMBOLS /* Define to 1 if the system has the type `ptrdiff_t'. */ #undef HAVE_PTRDIFF_T /* Define to 1 if you have the `readdir' function. */ #undef HAVE_READDIR /* Define if you have the shl_load function. */ #undef HAVE_SHL_LOAD /* Define to 1 if you have the header file. */ #undef HAVE_SSTREAM /* Define to 1 if you have the header file. */ #undef HAVE_STACK /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strlcat' function. */ #undef HAVE_STRLCAT /* Define to 1 if you have the `strlcpy' function. */ #undef HAVE_STRLCPY /* Define to 1 if you have the header file. */ #undef HAVE_SYS_DL_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the header file. */ #undef HAVE_UTILITY /* Define to 1 if you have the header file. */ #undef HAVE_VECTOR /* This value is set to 1 to indicate that the system argz facility works */ #undef HAVE_WORKING_ARGZ /* Define if the OS needs help to load dependent libraries for dlopen(). */ #undef LTDL_DLOPEN_DEPLIBS /* Define to the system default library search path. */ #undef LT_DLSEARCH_PATH /* The archive extension */ #undef LT_LIBEXT /* The archive prefix */ #undef LT_LIBPREFIX /* Define to the extension used for runtime loadable modules, say, ".so". */ #undef LT_MODULE_EXT /* Define to the name of the environment variable that determines the run-time module search path. */ #undef LT_MODULE_PATH_VAR /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Define if dlsym() requires a leading underscore in symbol names. */ #undef NEED_USCORE /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* Define so that glibc/gnulib argp.h does not typedef error_t. */ #undef __error_t_defined /* Define to a type to use for `error_t' if it is not otherwise available. */ #undef error_t /* Define to rpl_malloc if the replacement function should be used. */ #undef malloc /* Define to `int' if does not define. */ #undef pid_t /* Define to `unsigned int' if does not define. */ #undef size_t diagnostics-0.3.3/configure0000744000076500000240000273164511567506166012707 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.63 for diagnostics 0.3.3. # # Report bugs to . # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH if test "x$CONFIG_SHELL" = x; then if (eval ":") 2>/dev/null; then as_have_required=yes else as_have_required=no fi if test $as_have_required = yes && (eval ": (as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=\$LINENO as_lineno_2=\$LINENO test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ( test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" )) || { (exit 1); exit 1; } ") 2> /dev/null; then : else as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. case $as_dir in /*) for as_base in sh bash ksh sh5; do as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac done IFS=$as_save_IFS for as_shell in $as_candidate_shells $SHELL; do # Try only shells that exist, to save several forks. if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { ("$as_shell") 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : _ASEOF }; then CONFIG_SHELL=$as_shell as_have_required=yes if { "$as_shell" 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : (as_func_return () { (exit $1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = "$1" ); then : else exitcode=1 echo positional parameters were not saved. fi test $exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ( test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )) || { (exit 1); exit 1; } _ASEOF }; then break fi fi done if test "x$CONFIG_SHELL" != x; then for as_var in BASH_ENV ENV do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test $as_have_required = no; then echo This script requires a shell more modern than all the echo shells that I found on your system. Please install a echo modern shell, or manually run the script under such a echo shell if you do have one. { (exit 1); exit 1; } fi fi fi (eval "as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0") || { echo No shell found that supports shell functions. echo Please tell bug-autoconf@gnu.org about your system, echo including any error possibly output before this message. echo This can help us improve future autoconf versions. echo Configuration will now proceed without shell functions. } as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" lt_ltdl_dir='libltdl' lt_dlopen_dir="$lt_ltdl_dir" SHELL=${CONFIG_SHELL-/bin/sh} exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='diagnostics' PACKAGE_TARNAME='diagnostics' PACKAGE_VERSION='0.3.3' PACKAGE_STRING='diagnostics 0.3.3' PACKAGE_BUGREPORT='christian@schallhart.net' ac_unique_file="diagnostics/annotations.hpp" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" enable_option_checking=no ac_subst_vars='ltdl_LTLIBOBJS ltdl_LIBOBJS am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS DOXYGEN_PAPER_SIZE DX_COND_latex_FALSE DX_COND_latex_TRUE DX_COND_pdf_FALSE DX_COND_pdf_TRUE DX_PDFLATEX DX_FLAG_pdf DX_COND_ps_FALSE DX_COND_ps_TRUE DX_EGREP DX_DVIPS DX_MAKEINDEX DX_LATEX DX_FLAG_ps DX_COND_html_FALSE DX_COND_html_TRUE DX_FLAG_html DX_COND_chi_FALSE DX_COND_chi_TRUE DX_FLAG_chi DX_COND_chm_FALSE DX_COND_chm_TRUE DX_HHC DX_FLAG_chm DX_COND_xml_FALSE DX_COND_xml_TRUE DX_FLAG_xml DX_COND_rtf_FALSE DX_COND_rtf_TRUE DX_FLAG_rtf DX_COND_man_FALSE DX_COND_man_TRUE DX_FLAG_man DX_COND_dot_FALSE DX_COND_dot_TRUE DX_DOT DX_FLAG_dot DX_COND_doc_FALSE DX_COND_doc_TRUE DX_PERL DX_DOXYGEN DX_FLAG_doc DX_ENV DX_DOCDIR DX_CONFIG DX_PROJECT LIBOBJS STACKTRACE_FALSE STACKTRACE_TRUE enable_stacktrace DIAGNOSTICSLEVEL disable_update_makefiles enable_install_headers ACE_LIBS ACE_CFLAGS PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG PKGCONFIG OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL LIBTOOL LTDLOPEN LT_CONFIG_H subdirs CONVENIENCE_LTDL_FALSE CONVENIENCE_LTDL_TRUE INSTALL_LTDL_FALSE INSTALL_LTDL_TRUE ARGZ_H sys_symbol_underscore LD NM ac_ct_DUMPBIN DUMPBIN LIBADD_DL LT_DLPREOPEN LIBADD_DLD_LINK LIBADD_SHL_LOAD LIBADD_DLOPEN LT_DLLOADERS SED OBJDUMP FGREP host_os host_vendor host_cpu host build_os build_vendor build_cpu build EGREP GREP INCLTDL LTDLINCL LTDLDEPS LIBLTDL LN_S CXXCPP CPP am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE ac_ct_CC CFLAGS CC am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CXX CPPFLAGS LDFLAGS CXXFLAGS CXX ac_aux_dir am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_dependency_tracking with_included_ltdl with_ltdl_include with_ltdl_lib with_gnu_ld enable_ltdl_install enable_shared enable_static with_pic enable_fast_install with_sysroot enable_libtool_lock enable_install_headers enable_update_makefiles enable_doxygen_doc enable_doxygen_dot enable_doxygen_man enable_doxygen_rtf enable_doxygen_xml enable_doxygen_chm enable_doxygen_chi enable_doxygen_html enable_doxygen_ps enable_doxygen_pdf ' ac_precious_vars='build_alias host_alias target_alias CXX CXXFLAGS LDFLAGS LIBS CPPFLAGS CCC CC CFLAGS CPP CXXCPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR ACE_CFLAGS ACE_LIBS DOXYGEN_PAPER_SIZE' ac_subdirs_all='libltdl' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { $as_echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { $as_echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 { (exit 1); exit 1; }; } ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { $as_echo "$as_me: error: working directory cannot be determined" >&2 { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 { (exit 1); exit 1; }; } # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures diagnostics 0.3.3 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/diagnostics] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of diagnostics 0.3.3:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-ltdl-install install libltdl --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --enable-install-headers Install header files during make install --disable-update-makefiles Do not update any Makefile.am --disable-doxygen-doc don't generate any doxygen documentation --disable-doxygen-dot don't generate graphics for doxygen documentation --enable-doxygen-man generate doxygen manual pages --enable-doxygen-rtf generate doxygen RTF documentation --enable-doxygen-xml generate doxygen XML documentation --enable-doxygen-chm generate doxygen compressed HTML help documentation --enable-doxygen-chi generate doxygen seperate compressed HTML help index file --disable-doxygen-html don't generate doxygen plain HTML documentation --enable-doxygen-ps generate doxygen PostScript documentation --enable-doxygen-pdf generate doxygen PDF documentation Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-included-ltdl use the GNU ltdl sources included here --with-ltdl-include=DIR use the ltdl headers installed in DIR --with-ltdl-lib=DIR use the libltdl.la installed in DIR --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-pic try to use only PIC/non-PIC objects [default=use both] --with-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysroot if not specified). Some influential environment variables: CXX C++ compiler command CXXFLAGS C++ compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CC C compiler command CFLAGS C compiler flags CPP C preprocessor CXXCPP C++ preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path ACE_CFLAGS C compiler flags for ACE, overriding pkg-config ACE_LIBS linker flags for ACE, overriding pkg-config DOXYGEN_PAPER_SIZE a4wide (default), a4, letter, legal or executive Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF diagnostics configure 0.3.3 generated by GNU Autoconf 2.63 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by diagnostics $as_me 0.3.3, which was generated by GNU Autoconf 2.63. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test -r "$ac_site_file"; then { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 $as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in config "$srcdir"/config; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in config \"$srcdir\"/config" >&5 $as_echo "$as_me: error: cannot find install-sh or install.sh in config \"$srcdir\"/config" >&2;} { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ac_config_headers="$ac_config_headers config.h" # suppress -I. -I. -I../.., includes explicitly set am__api_version='1.11' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5 $as_echo "$as_me: error: unsafe absolute working directory name" >&2;} { (exit 1); exit 1; }; };; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5 $as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;} { (exit 1); exit 1; }; };; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 $as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 $as_echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 $as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='diagnostics' VERSION='0.3.3' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_config_commands="$ac_config_commands diagnostics/features.hpp" ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu # Checks for programs. ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:$LINENO: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5 $as_echo_n "checking for C++ compiler default output file name... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { $as_echo "$as_me:$LINENO: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } if test -z "$ac_file"; then $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C++ compiler cannot create executables See \`config.log' for more details." >&5 $as_echo "$as_me: error: C++ compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 $as_echo_n "checking whether the C++ compiler works... " >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot run C++ compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot run C++ compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi fi fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } { $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } { $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi rm -f conftest$ac_cv_exeext { $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CXXFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:$LINENO: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CXX" am_compiler_list= { $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 $as_echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:$LINENO: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:$LINENO: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:$LINENO: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 $as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then if test "${ac_cv_prog_CXXCPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 $as_echo "$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&5 $as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi { $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done # new libtool versions: # LT_INIT # LTDL_INIT case $enable_ltdl_convenience in no) { { $as_echo "$as_me:$LINENO: error: this package needs a convenience libltdl" >&5 $as_echo "$as_me: error: this package needs a convenience libltdl" >&2;} { (exit 1); exit 1; }; } ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_build_prefix}'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la" LTDLDEPS=$LIBLTDL LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}" # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" { $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:$LINENO: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 $as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} { (exit 1); exit 1; }; } { $as_echo "$as_me:$LINENO: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if test "${ac_cv_build+set}" = set; then $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 $as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 $as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 $as_echo "$as_me: error: invalid value of canonical build" >&2;} { (exit 1); exit 1; }; };; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:$LINENO: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if test "${ac_cv_host+set}" = set; then $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 $as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} { (exit 1); exit 1; }; } fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 $as_echo "$as_me: error: invalid value of canonical host" >&2;} { (exit 1); exit 1; }; };; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:$LINENO: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if test "${ac_cv_path_FGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if test "${ac_cv_path_SED+set}" = set; then $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed $as_unset ac_script || ac_script= if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 $as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; haiku*) version_type=linux need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then lt_cv_shlibpath_overrides_runpath=yes fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:$LINENO: checking which extension is used for runtime loadable modules" >&5 $as_echo_n "checking which extension is used for runtime loadable modules... " >&6; } if test "${libltdl_cv_shlibext+set}" = set; then $as_echo_n "(cached) " >&6 else module=yes eval libltdl_cv_shlibext=$shrext_cmds fi { $as_echo "$as_me:$LINENO: result: $libltdl_cv_shlibext" >&5 $as_echo "$libltdl_cv_shlibext" >&6; } if test -n "$libltdl_cv_shlibext"; then cat >>confdefs.h <<_ACEOF #define LT_MODULE_EXT "$libltdl_cv_shlibext" _ACEOF fi { $as_echo "$as_me:$LINENO: checking which variable specifies run-time module search path" >&5 $as_echo_n "checking which variable specifies run-time module search path... " >&6; } if test "${lt_cv_module_path_var+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_module_path_var="$shlibpath_var" fi { $as_echo "$as_me:$LINENO: result: $lt_cv_module_path_var" >&5 $as_echo "$lt_cv_module_path_var" >&6; } if test -n "$lt_cv_module_path_var"; then cat >>confdefs.h <<_ACEOF #define LT_MODULE_PATH_VAR "$lt_cv_module_path_var" _ACEOF fi { $as_echo "$as_me:$LINENO: checking for the default library search path" >&5 $as_echo_n "checking for the default library search path... " >&6; } if test "${lt_cv_sys_dlsearch_path+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_dlsearch_path" >&5 $as_echo "$lt_cv_sys_dlsearch_path" >&6; } if test -n "$lt_cv_sys_dlsearch_path"; then sys_dlsearch_path= for dir in $lt_cv_sys_dlsearch_path; do if test -z "$sys_dlsearch_path"; then sys_dlsearch_path="$dir" else sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir" fi done cat >>confdefs.h <<_ACEOF #define LT_DLSEARCH_PATH "$sys_dlsearch_path" _ACEOF fi LT_DLLOADERS= ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu LIBADD_DLOPEN= { $as_echo "$as_me:$LINENO: checking for library containing dlopen" >&5 $as_echo_n "checking for library containing dlopen... " >&6; } if test "${ac_cv_search_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF for ac_lib in '' dl; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_dlopen=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_dlopen+set}" = set; then break fi done if test "${ac_cv_search_dlopen+set}" = set; then : else ac_cv_search_dlopen=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_dlopen" >&5 $as_echo "$ac_cv_search_dlopen" >&6; } ac_res=$ac_cv_search_dlopen if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" cat >>confdefs.h <<\_ACEOF #define HAVE_LIBDL 1 _ACEOF if test "$ac_cv_search_dlopen" != "none required" ; then LIBADD_DLOPEN="-ldl" fi libltdl_cv_lib_dl_dlopen="yes" LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la" else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if HAVE_DLFCN_H # include #endif int main () { dlopen(0, 0); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then cat >>confdefs.h <<\_ACEOF #define HAVE_LIBDL 1 _ACEOF libltdl_cv_func_dlopen="yes" LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_svld_dlopen=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_svld_dlopen=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = x""yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_LIBDL 1 _ACEOF LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes" LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la" fi fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes then lt_save_LIBS="$LIBS" LIBS="$LIBS $LIBADD_DLOPEN" for ac_func in dlerror do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done LIBS="$lt_save_LIBS" fi LIBADD_SHL_LOAD= { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 $as_echo_n "checking for shl_load... " >&6; } if test "${ac_cv_func_shl_load+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define shl_load to an innocuous variant, in case declares shl_load. For example, HP-UX 11i declares gettimeofday. */ #define shl_load innocuous_shl_load /* System header to define __stub macros and hopefully few prototypes, which can conflict with char shl_load (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef shl_load /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_shl_load || defined __stub___shl_load choke me #endif int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_shl_load=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_shl_load=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 $as_echo "$ac_cv_func_shl_load" >&6; } if test "x$ac_cv_func_shl_load" = x""yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_SHL_LOAD 1 _ACEOF LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la" else { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_dld_shl_load=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_shl_load=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = x""yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_SHL_LOAD 1 _ACEOF LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la" LIBADD_SHL_LOAD="-ldld" fi fi case $host_os in darwin[1567].*) # We only want this for pre-Mac OS X 10.4. { $as_echo "$as_me:$LINENO: checking for _dyld_func_lookup" >&5 $as_echo_n "checking for _dyld_func_lookup... " >&6; } if test "${ac_cv_func__dyld_func_lookup+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define _dyld_func_lookup to an innocuous variant, in case declares _dyld_func_lookup. For example, HP-UX 11i declares gettimeofday. */ #define _dyld_func_lookup innocuous__dyld_func_lookup /* System header to define __stub macros and hopefully few prototypes, which can conflict with char _dyld_func_lookup (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef _dyld_func_lookup /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char _dyld_func_lookup (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub__dyld_func_lookup || defined __stub____dyld_func_lookup choke me #endif int main () { return _dyld_func_lookup (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func__dyld_func_lookup=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func__dyld_func_lookup=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func__dyld_func_lookup" >&5 $as_echo "$ac_cv_func__dyld_func_lookup" >&6; } if test "x$ac_cv_func__dyld_func_lookup" = x""yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_DYLD 1 _ACEOF LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la" fi ;; beos*) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la" ;; cygwin* | mingw* | os2* | pw32*) { $as_echo "$as_me:$LINENO: checking whether cygwin_conv_path is declared" >&5 $as_echo_n "checking whether cygwin_conv_path is declared... " >&6; } if test "${ac_cv_have_decl_cygwin_conv_path+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { #ifndef cygwin_conv_path (void) cygwin_conv_path; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_have_decl_cygwin_conv_path=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_cygwin_conv_path=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_cygwin_conv_path" >&5 $as_echo "$ac_cv_have_decl_cygwin_conv_path" >&6; } if test "x$ac_cv_have_decl_cygwin_conv_path" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DECL_CYGWIN_CONV_PATH 1 _ACEOF else cat >>confdefs.h <<_ACEOF #define HAVE_DECL_CYGWIN_CONV_PATH 0 _ACEOF fi LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la" ;; esac { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_dld_dld_link=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_dld_link=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = x""yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_DLD 1 _ACEOF LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la" fi LT_DLPREOPEN= if test -n "$LT_DLLOADERS" then for lt_loader in $LT_DLLOADERS; do LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader " done cat >>confdefs.h <<\_ACEOF #define HAVE_LIBDLLOADER 1 _ACEOF fi LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD" ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if test "${lt_cv_path_NM+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DUMPBIN+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if test "${lt_cv_nm_interface+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:$LINENO: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case "$ECHO" in printf*) { $as_echo "$as_me:$LINENO: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:$LINENO: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:$LINENO: result: cat" >&5 $as_echo "cat" >&6; } ;; esac # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if test "${lt_cv_path_LD+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 $as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Now try to grab the symbols. nlist=conftest.nm if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\"") >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:$LINENO: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:$LINENO: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:$LINENO: checking for _ prefix in compiled symbols" >&5 $as_echo_n "checking for _ prefix in compiled symbols... " >&6; } if test "${lt_cv_sys_symbol_underscore+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_sys_symbol_underscore=no cat > conftest.$ac_ext <<_LT_EOF void nm_test_func(){} int main(){nm_test_func;return 0;} _LT_EOF if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Now try to grab the symbols. ac_nlist=conftest.nm if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist\"") >&5 (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s "$ac_nlist"; then # See whether the symbols have a leading underscore. if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then lt_cv_sys_symbol_underscore=yes else if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then : else echo "configure: cannot find nm_test_func in $ac_nlist" >&5 fi fi else echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "configure: failed program was:" >&5 cat conftest.c >&5 fi rm -rf conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_symbol_underscore" >&5 $as_echo "$lt_cv_sys_symbol_underscore" >&6; } sys_symbol_underscore=$lt_cv_sys_symbol_underscore for ac_header in dlfcn.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done if test x"$lt_cv_sys_symbol_underscore" = xyes; then if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then { $as_echo "$as_me:$LINENO: checking whether we have to add an underscore for dlsym" >&5 $as_echo_n "checking whether we have to add an underscore for dlsym... " >&6; } if test "${libltdl_cv_need_uscore+set}" = set; then $as_echo_n "(cached) " >&6 else libltdl_cv_need_uscore=unknown save_LIBS="$LIBS" LIBS="$LIBS $LIBADD_DLOPEN" if test "$cross_compiling" = yes; then : libltdl_cv_need_uscore=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) libltdl_cv_need_uscore=no ;; x$lt_dlneed_uscore) libltdl_cv_need_uscore=yes ;; x$lt_dlunknown|x*) ;; esac else : # compilation failed fi fi rm -fr conftest* LIBS="$save_LIBS" fi { $as_echo "$as_me:$LINENO: result: $libltdl_cv_need_uscore" >&5 $as_echo "$libltdl_cv_need_uscore" >&6; } fi fi if test x"$libltdl_cv_need_uscore" = xyes; then cat >>confdefs.h <<\_ACEOF #define NEED_USCORE 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking whether deplibs are loaded by dlopen" >&5 $as_echo_n "checking whether deplibs are loaded by dlopen... " >&6; } if test "${lt_cv_sys_dlopen_deplibs+set}" = set; then $as_echo_n "(cached) " >&6 else # PORTME does your system automatically load deplibs for dlopen? # or its logical equivalent (e.g. shl_load for HP-UX < 11) # For now, we just catch OSes we know something about -- in the # future, we'll try test this programmatically. lt_cv_sys_dlopen_deplibs=unknown case $host_os in aix3*|aix4.1.*|aix4.2.*) # Unknown whether this is true for these versions of AIX, but # we want this `case' here to explicitly catch those versions. lt_cv_sys_dlopen_deplibs=unknown ;; aix[4-9]*) lt_cv_sys_dlopen_deplibs=yes ;; amigaos*) case $host_cpu in powerpc) lt_cv_sys_dlopen_deplibs=no ;; esac ;; darwin*) # Assuming the user has installed a libdl from somewhere, this is true # If you are looking for one http://www.opendarwin.org/projects/dlcompat lt_cv_sys_dlopen_deplibs=yes ;; freebsd* | dragonfly*) lt_cv_sys_dlopen_deplibs=yes ;; gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu) # GNU and its variants, using gnu ld.so (Glibc) lt_cv_sys_dlopen_deplibs=yes ;; hpux10*|hpux11*) lt_cv_sys_dlopen_deplibs=yes ;; interix*) lt_cv_sys_dlopen_deplibs=yes ;; irix[12345]*|irix6.[01]*) # Catch all versions of IRIX before 6.2, and indicate that we don't # know how it worked for any of those versions. lt_cv_sys_dlopen_deplibs=unknown ;; irix*) # The case above catches anything before 6.2, and it's known that # at 6.2 and later dlopen does load deplibs. lt_cv_sys_dlopen_deplibs=yes ;; netbsd*) lt_cv_sys_dlopen_deplibs=yes ;; openbsd*) lt_cv_sys_dlopen_deplibs=yes ;; osf[1234]*) # dlopen did load deplibs (at least at 4.x), but until the 5.x series, # it did *not* use an RPATH in a shared library to find objects the # library depends on, so we explicitly say `no'. lt_cv_sys_dlopen_deplibs=no ;; osf5.0|osf5.0a|osf5.1) # dlopen *does* load deplibs and with the right loader patch applied # it even uses RPATH in a shared library to search for shared objects # that the library depends on, but there's no easy way to know if that # patch is installed. Since this is the case, all we can really # say is unknown -- it depends on the patch being installed. If # it is, this changes to `yes'. Without it, it would be `no'. lt_cv_sys_dlopen_deplibs=unknown ;; osf*) # the two cases above should catch all versions of osf <= 5.1. Read # the comments above for what we know about them. # At > 5.1, deplibs are loaded *and* any RPATH in a shared library # is used to find them so we can finally say `yes'. lt_cv_sys_dlopen_deplibs=yes ;; qnx*) lt_cv_sys_dlopen_deplibs=yes ;; solaris*) lt_cv_sys_dlopen_deplibs=yes ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) libltdl_cv_sys_dlopen_deplibs=yes ;; esac fi { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_dlopen_deplibs" >&5 $as_echo "$lt_cv_sys_dlopen_deplibs" >&6; } if test "$lt_cv_sys_dlopen_deplibs" != yes; then cat >>confdefs.h <<\_ACEOF #define LTDL_DLOPEN_DEPLIBS 1 _ACEOF fi : for ac_header in argz.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for error_t" >&5 $as_echo_n "checking for error_t... " >&6; } if test "${ac_cv_type_error_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_error_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined(HAVE_ARGZ_H) # include #endif int main () { if (sizeof (error_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined(HAVE_ARGZ_H) # include #endif int main () { if (sizeof ((error_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_error_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_error_t" >&5 $as_echo "$ac_cv_type_error_t" >&6; } if test "x$ac_cv_type_error_t" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_ERROR_T 1 _ACEOF else cat >>confdefs.h <<\_ACEOF #define error_t int _ACEOF cat >>confdefs.h <<\_ACEOF #define __error_t_defined 1 _ACEOF fi ARGZ_H= for ac_func in argz_add argz_append argz_count argz_create_sep argz_insert \ argz_next argz_stringify do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF else ARGZ_H=argz.h; _LT_LIBOBJS="$_LT_LIBOBJS argz.$ac_objext" fi done if test -z "$ARGZ_H"; then { $as_echo "$as_me:$LINENO: checking if argz actually works" >&5 $as_echo_n "checking if argz actually works... " >&6; } if test "${lt_cv_sys_argz_works+set}" = set; then $as_echo_n "(cached) " >&6 else case $host_os in #( *cygwin*) lt_cv_sys_argz_works=no if test "$cross_compiling" != no; then lt_cv_sys_argz_works="guessing no" else lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/' save_IFS=$IFS IFS=-. set x `uname -r | sed -e "$lt_sed_extract_leading_digits"` IFS=$save_IFS lt_os_major=${2-0} lt_os_minor=${3-0} lt_os_micro=${4-0} if test "$lt_os_major" -gt 1 \ || { test "$lt_os_major" -eq 1 \ && { test "$lt_os_minor" -gt 5 \ || { test "$lt_os_minor" -eq 5 \ && test "$lt_os_micro" -gt 24; }; }; }; then lt_cv_sys_argz_works=yes fi fi ;; #( *) lt_cv_sys_argz_works=yes ;; esac fi { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_argz_works" >&5 $as_echo "$lt_cv_sys_argz_works" >&6; } if test "$lt_cv_sys_argz_works" = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_WORKING_ARGZ 1 _ACEOF else ARGZ_H=argz.h _LT_LIBOBJS="$_LT_LIBOBJS argz.$ac_objext" fi fi { $as_echo "$as_me:$LINENO: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if test "${lt_cv_objdir+set}" = set; then $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF { $as_echo "$as_me:$LINENO: checking whether libtool supports -dlopen/-dlpreopen" >&5 $as_echo_n "checking whether libtool supports -dlopen/-dlpreopen... " >&6; } if test "${libltdl_cv_preloaded_symbols+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$lt_cv_sys_global_symbol_pipe"; then libltdl_cv_preloaded_symbols=yes else libltdl_cv_preloaded_symbols=no fi fi { $as_echo "$as_me:$LINENO: result: $libltdl_cv_preloaded_symbols" >&5 $as_echo "$libltdl_cv_preloaded_symbols" >&6; } if test x"$libltdl_cv_preloaded_symbols" = xyes; then cat >>confdefs.h <<\_ACEOF #define HAVE_PRELOADED_SYMBOLS 1 _ACEOF fi # Set options # Check whether --with-included_ltdl was given. if test "${with_included_ltdl+set}" = set; then withval=$with_included_ltdl; fi if test "x$with_included_ltdl" != xyes; then # We are not being forced to use the included libltdl sources, so # decide whether there is a useful installed version we can use. { $as_echo "$as_me:$LINENO: checking for ltdl.h" >&5 $as_echo_n "checking for ltdl.h... " >&6; } if test "${ac_cv_header_ltdl_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_ltdl_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_ltdl_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_ltdl_h" >&5 $as_echo "$ac_cv_header_ltdl_h" >&6; } if test "x$ac_cv_header_ltdl_h" = x""yes; then { $as_echo "$as_me:$LINENO: checking whether lt_dlinterface_register is declared" >&5 $as_echo_n "checking whether lt_dlinterface_register is declared... " >&6; } if test "${ac_cv_have_decl_lt_dlinterface_register+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include int main () { #ifndef lt_dlinterface_register (void) lt_dlinterface_register; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_have_decl_lt_dlinterface_register=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_lt_dlinterface_register=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_lt_dlinterface_register" >&5 $as_echo "$ac_cv_have_decl_lt_dlinterface_register" >&6; } if test "x$ac_cv_have_decl_lt_dlinterface_register" = x""yes; then { $as_echo "$as_me:$LINENO: checking for lt_dladvise_preload in -lltdl" >&5 $as_echo_n "checking for lt_dladvise_preload in -lltdl... " >&6; } if test "${ac_cv_lib_ltdl_lt_dladvise_preload+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lltdl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char lt_dladvise_preload (); int main () { return lt_dladvise_preload (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_ltdl_lt_dladvise_preload=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_ltdl_lt_dladvise_preload=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ltdl_lt_dladvise_preload" >&5 $as_echo "$ac_cv_lib_ltdl_lt_dladvise_preload" >&6; } if test "x$ac_cv_lib_ltdl_lt_dladvise_preload" = x""yes; then with_included_ltdl=no else with_included_ltdl=yes fi else with_included_ltdl=yes fi else with_included_ltdl=yes fi fi # Check whether --with-ltdl_include was given. if test "${with_ltdl_include+set}" = set; then withval=$with_ltdl_include; fi if test -n "$with_ltdl_include"; then if test -f "$with_ltdl_include/ltdl.h"; then : else { { $as_echo "$as_me:$LINENO: error: invalid ltdl include directory: \`$with_ltdl_include'" >&5 $as_echo "$as_me: error: invalid ltdl include directory: \`$with_ltdl_include'" >&2;} { (exit 1); exit 1; }; } fi else with_ltdl_include=no fi # Check whether --with-ltdl_lib was given. if test "${with_ltdl_lib+set}" = set; then withval=$with_ltdl_lib; fi if test -n "$with_ltdl_lib"; then if test -f "$with_ltdl_lib/libltdl.la"; then : else { { $as_echo "$as_me:$LINENO: error: invalid ltdl library directory: \`$with_ltdl_lib'" >&5 $as_echo "$as_me: error: invalid ltdl library directory: \`$with_ltdl_lib'" >&2;} { (exit 1); exit 1; }; } fi else with_ltdl_lib=no fi case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in ,yes,no,no,) case $enable_ltdl_convenience in no) { { $as_echo "$as_me:$LINENO: error: this package needs a convenience libltdl" >&5 $as_echo "$as_me: error: this package needs a convenience libltdl" >&2;} { (exit 1); exit 1; }; } ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_build_prefix}'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la" LTDLDEPS=$LIBLTDL LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}" # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ;; ,no,no,no,) # If the included ltdl is not to be used, then use the # preinstalled libltdl we found. cat >>confdefs.h <<\_ACEOF #define HAVE_LTDL 1 _ACEOF LIBLTDL=-lltdl LTDLDEPS= LTDLINCL= ;; ,no*,no,*) { { $as_echo "$as_me:$LINENO: error: \`--with-ltdl-include' and \`--with-ltdl-lib' options must be used together" >&5 $as_echo "$as_me: error: \`--with-ltdl-include' and \`--with-ltdl-lib' options must be used together" >&2;} { (exit 1); exit 1; }; } ;; *) with_included_ltdl=no LIBLTDL="-L$with_ltdl_lib -lltdl" LTDLDEPS= LTDLINCL="-I$with_ltdl_include" ;; esac INCLTDL="$LTDLINCL" # Report our decision... { $as_echo "$as_me:$LINENO: checking where to find libltdl headers" >&5 $as_echo_n "checking where to find libltdl headers... " >&6; } { $as_echo "$as_me:$LINENO: result: $LTDLINCL" >&5 $as_echo "$LTDLINCL" >&6; } { $as_echo "$as_me:$LINENO: checking where to find libltdl library" >&5 $as_echo_n "checking where to find libltdl library... " >&6; } { $as_echo "$as_me:$LINENO: result: $LIBLTDL" >&5 $as_echo "$LIBLTDL" >&6; } # Check whether --enable-ltdl-install was given. if test "${enable_ltdl_install+set}" = set; then enableval=$enable_ltdl_install; fi case ,${enable_ltdl_install},${enable_ltdl_convenience} in *yes*) ;; *) enable_ltdl_convenience=yes ;; esac if test x"${enable_ltdl_install-no}" != xno; then INSTALL_LTDL_TRUE= INSTALL_LTDL_FALSE='#' else INSTALL_LTDL_TRUE='#' INSTALL_LTDL_FALSE= fi if test x"${enable_ltdl_convenience-no}" != xno; then CONVENIENCE_LTDL_TRUE= CONVENIENCE_LTDL_FALSE='#' else CONVENIENCE_LTDL_TRUE='#' CONVENIENCE_LTDL_FALSE= fi subdirs="$subdirs libltdl" # In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS # the user used. This is so that ltdl.h can pick up the parent projects # config.h file, The first file in AC_CONFIG_HEADERS must contain the # definitions required by ltdl.c. # FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility). for ac_header in unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in closedir opendir readdir do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF else _LT_LIBOBJS="$_LT_LIBOBJS lt__dirent.$ac_objext" fi done for ac_func in strlcat strlcpy do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF else _LT_LIBOBJS="$_LT_LIBOBJS lt__strl.$ac_objext" fi done cat >>confdefs.h <<_ACEOF #define LT_LIBEXT "$libext" _ACEOF name= eval "lt_libprefix=\"$libname_spec\"" cat >>confdefs.h <<_ACEOF #define LT_LIBPREFIX "$lt_libprefix" _ACEOF name=ltdl eval "LTDLOPEN=\"$libname_spec\"" # Only expand once: case `pwd` in *\ * | *\ *) { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4' macro_revision='1.3293' ltmain="$ac_aux_dir/ltmain.sh" # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # find the maximum length of command line arguments { $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if test "${lt_cv_sys_max_cmd_len+set}" = set; then $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:$LINENO: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len { $as_echo "$as_me:$LINENO: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if test "${lt_cv_to_host_file_cmd+set}" = set; then $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:$LINENO: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:$LINENO: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if test "${lt_cv_to_tool_file_cmd+set}" = set; then $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:$LINENO: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if test "${lt_cv_ld_reload_flag+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test "$GCC" != yes; then reload_cmds=false fi ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac { $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if test "${lt_cv_deplibs_check_method+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DLLTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:$LINENO: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:$LINENO: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac fi { $as_echo "$as_me:$LINENO: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AR+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:$LINENO: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:$LINENO: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if test "${lt_cv_ar_at_file+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { (eval echo "$as_me:$LINENO: \"$lt_ar_try\"") >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { (eval echo "$as_me:$LINENO: \"$lt_ar_try\"") >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac { $as_echo "$as_me:$LINENO: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:$LINENO: result: ${with_sysroot}" >&5 $as_echo "${with_sysroot}" >&6; } { { $as_echo "$as_me:$LINENO: error: The sysroot must be an absolute path." >&5 $as_echo "$as_me: error: The sysroot must be an absolute path." >&2;} { (exit 1); exit 1; }; } ;; esac { $as_echo "$as_me:$LINENO: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if test "${lt_cv_cc_needs_belf+set}" = set; then $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then lt_cv_cc_needs_belf=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 lt_cv_cc_needs_belf=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:$LINENO: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:$LINENO: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if test "${lt_cv_path_mainfest_tool+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DSYMUTIL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_NMEDIT+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_LIPO+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OTOOL64+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if test "${lt_cv_apple_cc_single_mod+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if test "${lt_cv_ld_exported_symbols_list+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then lt_cv_ld_exported_symbols_list=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 lt_cv_ld_exported_symbols_list=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:$LINENO: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if test "${lt_cv_ld_force_load+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:$LINENO: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf # Set options enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then withval=$with_pic; pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:$LINENO: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if test "${lt_cv_objdir+set}" = set; then $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:$LINENO: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' lt_prog_compiler_pic='-Xcompiler -fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ F* | *Sun*Fortran*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "${lt_cv_prog_compiler_pic+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if test "${lt_cv_prog_compiler_pic_works+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if test "${lt_cv_prog_compiler_static_works+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld='-rpath $libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if test "${lt_cv_aix_libpath_+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if test "${lt_cv_aix_libpath_+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:$LINENO: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if test "${lt_cv_prog_compiler__b+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test x"$lt_cv_prog_compiler__b" = xyes; then archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:$LINENO: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if test "${lt_cv_irix_exported_symbol+set}" = set; then $as_echo_n "(cached) " >&6 else save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then lt_cv_irix_exported_symbol=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 lt_cv_irix_exported_symbol=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:$LINENO: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test "$lt_cv_irix_exported_symbol" = yes; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if test "${lt_cv_archive_cmds_need_lc+set}" = set; then $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; haiku*) version_type=linux need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then lt_cv_shlibpath_overrides_runpath=yes fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_dl_dlopen=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 $as_echo_n "checking for shl_load... " >&6; } if test "${ac_cv_func_shl_load+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define shl_load to an innocuous variant, in case declares shl_load. For example, HP-UX 11i declares gettimeofday. */ #define shl_load innocuous_shl_load /* System header to define __stub macros and hopefully few prototypes, which can conflict with char shl_load (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef shl_load /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_shl_load || defined __stub___shl_load choke me #endif int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_shl_load=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_shl_load=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 $as_echo "$ac_cv_func_shl_load" >&6; } if test "x$ac_cv_func_shl_load" = x""yes; then lt_cv_dlopen="shl_load" else { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_dld_shl_load=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_shl_load=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = x""yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 $as_echo_n "checking for dlopen... " >&6; } if test "${ac_cv_func_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define dlopen to an innocuous variant, in case declares dlopen. For example, HP-UX 11i declares gettimeofday. */ #define dlopen innocuous_dlopen /* System header to define __stub macros and hopefully few prototypes, which can conflict with char dlopen (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef dlopen /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_dlopen || defined __stub___dlopen choke me #endif int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_dlopen=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_dlopen=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 $as_echo "$ac_cv_func_dlopen" >&6; } if test "x$ac_cv_func_dlopen" = x""yes; then lt_cv_dlopen="dlopen" else { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_dl_dlopen=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_svld_dlopen=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_svld_dlopen=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_dld_dld_link=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_dld_link=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = x""yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if test "${lt_cv_dlopen_self+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if test "${lt_cv_dlopen_self_static+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu CC="$lt_save_CC" if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then if test "${ac_cv_prog_CXXCPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 $as_echo "$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&5 $as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu else _lt_caught_CXX_error=yes fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu archive_cmds_need_lc_CXX=no allow_undefined_flag_CXX= always_export_symbols_CXX=no archive_expsym_cmds_CXX= compiler_needs_object_CXX=no export_dynamic_flag_spec_CXX= hardcode_direct_CXX=no hardcode_direct_absolute_CXX=no hardcode_libdir_flag_spec_CXX= hardcode_libdir_flag_spec_ld_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no inherit_rpath_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds reload_flag_CXX=$reload_flag reload_cmds_CXX=$reload_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o objext_CXX=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if test "${lt_cv_path_LD+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 $as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_CXX= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ld_shlibs_CXX=yes case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_CXX='' hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes file_list_spec_CXX='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_CXX=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_CXX=yes hardcode_libdir_flag_spec_CXX='-L$libdir' hardcode_libdir_separator_CXX= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec_CXX='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. always_export_symbols_CXX=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty # executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if test "${lt_cv_aix_libpath__CXX+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if test "${lt_cv_aix_libpath__CXX+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' fi archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared # libraries. archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_CXX=' ' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=yes file_list_spec_CXX='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' enable_shared_with_static_runtimes_CXX=yes # Don't use ranlib old_postinstall_cmds_CXX='chmod 644 $oldlib' postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec_CXX='' fi link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else ld_shlibs_CXX=no fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; freebsd[12]*) # C++ shared libraries reported to be fairly broken before # switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes ;; gnu*) ;; haiku*) archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs_CXX=yes ;; hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no ;; *) hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: inherit_rpath_CXX=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [1-5].* | *pgcpp\ [1-5].*) prelink_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) ld_shlibs_CXX=yes ;; openbsd2*) # C++ shared libraries are fairly broken ld_shlibs_CXX=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no hardcode_direct_absolute_CXX=yes archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else ld_shlibs_CXX=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) case $host in osf3*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; esac hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs_CXX=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_CXX='${wl}-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_CXX='${wl}-z,text' allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes export_dynamic_flag_spec_CXX='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ '"$old_archive_cmds_CXX" reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ '"$reload_cmds_CXX" ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac { $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no GCC_CXX="$GXX" LD_CXX="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... # Dependencies to place before and after the object being linked: predep_objects_CXX= postdep_objects_CXX= predeps_CXX= postdeps_CXX= compiler_lib_search_path_CXX= cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; esac if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then compiler_lib_search_path_CXX="${prev}${p}" else compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$postdeps_CXX"; then postdeps_CXX="${prev}${p}" else postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects_CXX"; then predep_objects_CXX="$p" else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then postdep_objects_CXX="$p" else postdep_objects_CXX="$postdep_objects_CXX $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling CXX test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken case $host_os in interix[3-9]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. predep_objects_CXX= postdep_objects_CXX= postdeps_CXX= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; esac case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac compiler_lib_search_dirs_CXX= if test -n "${compiler_lib_search_path_CXX}"; then compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi lt_prog_compiler_wl_CXX= lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic_CXX='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_CXX='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static_CXX= ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac else case $host_os in aix[4-9]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; dgux*) case $cc_basename in ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_CXX='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fPIC' lt_prog_compiler_static_CXX='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) # IBM XL 8.0, 9.0 on PPC and BlueGene lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-qpic' lt_prog_compiler_static_CXX='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; netbsd*) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) lt_prog_compiler_can_build_shared_CXX=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; *) lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac { $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "${lt_cv_prog_compiler_pic_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes fi fi $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; esac else lt_prog_compiler_pic_CXX= lt_prog_compiler_can_build_shared_CXX=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" { $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes fi else lt_cv_prog_compiler_static_works_CXX=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then : else lt_prog_compiler_static_CXX= fi { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' ;; esac ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac { $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no with_gnu_ld_CXX=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_CXX" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_CXX=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if test "${lt_cv_archive_cmds_need_lc_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_CXX allow_undefined_flag_CXX= if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then lt_cv_archive_cmds_need_lc_CXX=no else lt_cv_archive_cmds_need_lc_CXX=yes fi allow_undefined_flag_CXX=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 $as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX ;; esac fi ;; esac { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; haiku*) version_type=linux need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then lt_cv_shlibpath_overrides_runpath=yes fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || test -n "$runpath_var_CXX" || test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct_CXX" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && test "$hardcode_minus_L_CXX" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_CXX=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_CXX=unsupported fi { $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink || test "$inherit_rpath_CXX" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ac_config_commands="$ac_config_commands libtool" # Only expand once: # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_PKGCONFIG+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$PKGCONFIG"; then ac_cv_prog_PKGCONFIG="$PKGCONFIG" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_PKGCONFIG="yes" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_PKGCONFIG" && ac_cv_prog_PKGCONFIG="no" fi fi PKGCONFIG=$ac_cv_prog_PKGCONFIG if test -n "$PKGCONFIG"; then { $as_echo "$as_me:$LINENO: result: $PKGCONFIG" >&5 $as_echo "$PKGCONFIG" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$PKGCONFIG" = "xno" ; then { $as_echo "$as_me:$LINENO: WARNING: pkg-config not found in PATH. Please install it first. ACE will not be used." >&5 $as_echo "$as_me: WARNING: pkg-config not found in PATH. Please install it first. ACE will not be used." >&2;} cat >>confdefs.h <<\_ACEOF #define HAVE_ACE 0 _ACEOF else if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_PKG_CONFIG+set}" = set; then $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { $as_echo "$as_me:$LINENO: checking for ACE" >&5 $as_echo_n "checking for ACE... " >&6; } if test -n "$ACE_CFLAGS"; then pkg_cv_ACE_CFLAGS="$ACE_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"ACE\"") >&5 ($PKG_CONFIG --exists --print-errors "ACE") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_ACE_CFLAGS=`$PKG_CONFIG --cflags "ACE" 2>/dev/null` else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$ACE_LIBS"; then pkg_cv_ACE_LIBS="$ACE_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"ACE\"") >&5 ($PKG_CONFIG --exists --print-errors "ACE") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_ACE_LIBS=`$PKG_CONFIG --libs "ACE" 2>/dev/null` else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then ACE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ACE" 2>&1` else ACE_PKG_ERRORS=`$PKG_CONFIG --print-errors "ACE" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$ACE_PKG_ERRORS" >&5 cat >>confdefs.h <<\_ACEOF #define HAVE_ACE 0 _ACEOF elif test $pkg_failed = untried; then { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } cat >>confdefs.h <<\_ACEOF #define HAVE_ACE 0 _ACEOF else ACE_CFLAGS=$pkg_cv_ACE_CFLAGS ACE_LIBS=$pkg_cv_ACE_LIBS { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } cat >>confdefs.h <<\_ACEOF #define HAVE_ACE 1 _ACEOF LDFLAGS="$LDFLAGS -lACE -lpthread" fi fi # Check whether --enable-install-headers was given. if test "${enable_install_headers+set}" = set; then enableval=$enable_install_headers; if test "x$enableval" != "xno" ; then enable_install_headers=--install-headers else enable_install_headers="" fi else enable_install_headers="" fi # Check whether --enable-update-makefiles was given. if test "${enable_update_makefiles+set}" = set; then enableval=$enable_update_makefiles; if test "x$enableval" = "xno" ; then disable_update_makefiles=--disable else disable_update_makefiles="" fi else disable_update_makefiles="" fi if test "x$DIAGNOSTICSLEVEL" = "x" ; then DIAGNOSTICSLEVEL=2 else DIAGNOSTICSLEVEL=$DIAGNOSTICSLEVEL fi # Checks for header files. for ac_header in string \ algorithm \ exception \ cstdio \ cstdlib \ cassert \ fstream \ map \ stack \ sstream \ iostream \ utility \ limits \ cmath \ vector do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to christian@schallhart.net ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF else { { $as_echo "$as_me:$LINENO: error: Essential header $ac_header missing" >&5 $as_echo "$as_me: error: Essential header $ac_header missing" >&2;} { (exit 1); exit 1; }; } fi done # Extract the first word of "addr2line", so it can be a program name with args. set dummy addr2line; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_enable_stacktrace+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$enable_stacktrace"; then ac_cv_prog_enable_stacktrace="$enable_stacktrace" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_enable_stacktrace="yes" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_enable_stacktrace" && ac_cv_prog_enable_stacktrace="no" fi fi enable_stacktrace=$ac_cv_prog_enable_stacktrace if test -n "$enable_stacktrace"; then { $as_echo "$as_me:$LINENO: result: $enable_stacktrace" >&5 $as_echo "$enable_stacktrace" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test x$enable_stacktrace = xyes ; then for ac_header in link.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to christian@schallhart.net ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF enable_stacktrace=yes ; break else enable_stacktrace=no fi done fi # unwinding doesn't work properly on ARM if test x$build = xarm-unknown-linux-gnueabi ; then enable_stacktrace=no fi if test x$enable_stacktrace = xyes; then STACKTRACE_TRUE= STACKTRACE_FALSE='#' else STACKTRACE_TRUE='#' STACKTRACE_FALSE= fi # Checks for typedefs, structures, and compiler characteristics. { $as_echo "$as_me:$LINENO: checking for pid_t" >&5 $as_echo_n "checking for pid_t... " >&6; } if test "${ac_cv_type_pid_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_pid_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (pid_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((pid_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_pid_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 $as_echo "$ac_cv_type_pid_t" >&6; } if test "x$ac_cv_type_pid_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define pid_t int _ACEOF fi { $as_echo "$as_me:$LINENO: checking for size_t" >&5 $as_echo_n "checking for size_t... " >&6; } if test "${ac_cv_type_size_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_size_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (size_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((size_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_size_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 $as_echo "$ac_cv_type_size_t" >&6; } if test "x$ac_cv_type_size_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi { $as_echo "$as_me:$LINENO: checking for ptrdiff_t" >&5 $as_echo_n "checking for ptrdiff_t... " >&6; } if test "${ac_cv_type_ptrdiff_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_ptrdiff_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (ptrdiff_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((ptrdiff_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_ptrdiff_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_ptrdiff_t" >&5 $as_echo "$ac_cv_type_ptrdiff_t" >&6; } if test "x$ac_cv_type_ptrdiff_t" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_PTRDIFF_T 1 _ACEOF fi # Checks for library functions. for ac_header in stdlib.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## --------------------------------------- ## ## Report this to christian@schallhart.net ## ## --------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 $as_echo_n "checking for GNU libc compatible malloc... " >&6; } if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_malloc_0_nonnull=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *malloc (); #endif int main () { return ! malloc (0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_malloc_0_nonnull=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_malloc_0_nonnull=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 $as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } if test $ac_cv_func_malloc_0_nonnull = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_MALLOC 1 _ACEOF else cat >>confdefs.h <<\_ACEOF #define HAVE_MALLOC 0 _ACEOF case " $LIBOBJS " in *" malloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; esac cat >>confdefs.h <<\_ACEOF #define malloc rpl_malloc _ACEOF fi for ac_func in atexit gettimeofday do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done # Files generated by configure ac_config_files="$ac_config_files diagnostics/extensions/stacktrace/Makefile diagnostics/basic_exceptions/Makefile diagnostics/unittest/test_system/Makefile diagnostics/extensions/memory/Makefile diagnostics/extensions/instrumentation/Makefile diagnostics/unittest/Makefile diagnostics/macros/Makefile diagnostics/frame/Makefile diagnostics/extensions/Makefile diagnostics/util/Makefile diagnostics/logger/Makefile diagnostics/Makefile Makefile" # Files: DX_PROJECT=diagnostics DX_CONFIG=config/doxygen.cfg DX_DOCDIR=doc/dx # Environment variables used inside doxygen.cfg: DX_ENV="$DX_ENV SRCDIR='$srcdir'" DX_ENV="$DX_ENV PROJECT='$DX_PROJECT'" DX_ENV="$DX_ENV DOCDIR='$DX_DOCDIR'" DX_ENV="$DX_ENV VERSION='$PACKAGE_VERSION'" # Doxygen itself: # Check whether --enable-doxygen-doc was given. if test "${enable_doxygen_doc+set}" = set; then enableval=$enable_doxygen_doc; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_doc=1 ;; #( n|N|no|No|NO) DX_FLAG_doc=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-doc" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-doc" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_doc=1 fi if test "$DX_FLAG_doc" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}doxygen", so it can be a program name with args. set dummy ${ac_tool_prefix}doxygen; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_DOXYGEN+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_DOXYGEN in [\\/]* | ?:[\\/]*) ac_cv_path_DX_DOXYGEN="$DX_DOXYGEN" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_DOXYGEN=$ac_cv_path_DX_DOXYGEN if test -n "$DX_DOXYGEN"; then { $as_echo "$as_me:$LINENO: result: $DX_DOXYGEN" >&5 $as_echo "$DX_DOXYGEN" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_DOXYGEN"; then ac_pt_DX_DOXYGEN=$DX_DOXYGEN # Extract the first word of "doxygen", so it can be a program name with args. set dummy doxygen; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_DOXYGEN+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_DOXYGEN in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_DOXYGEN="$ac_pt_DX_DOXYGEN" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_DOXYGEN=$ac_cv_path_ac_pt_DX_DOXYGEN if test -n "$ac_pt_DX_DOXYGEN"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_DOXYGEN" >&5 $as_echo "$ac_pt_DX_DOXYGEN" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_DOXYGEN" = x; then DX_DOXYGEN="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_DOXYGEN=$ac_pt_DX_DOXYGEN fi else DX_DOXYGEN="$ac_cv_path_DX_DOXYGEN" fi if test "$DX_FLAG_doc$DX_DOXYGEN" = 1; then { $as_echo "$as_me:$LINENO: WARNING: doxygen not found - will not generate any doxygen documentation" >&5 $as_echo "$as_me: WARNING: doxygen not found - will not generate any doxygen documentation" >&2;} DX_FLAG_doc=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}perl", so it can be a program name with args. set dummy ${ac_tool_prefix}perl; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_PERL+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_DX_PERL="$DX_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_PERL=$ac_cv_path_DX_PERL if test -n "$DX_PERL"; then { $as_echo "$as_me:$LINENO: result: $DX_PERL" >&5 $as_echo "$DX_PERL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_PERL"; then ac_pt_DX_PERL=$DX_PERL # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_PERL+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_PERL="$ac_pt_DX_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_PERL=$ac_cv_path_ac_pt_DX_PERL if test -n "$ac_pt_DX_PERL"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_PERL" >&5 $as_echo "$ac_pt_DX_PERL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_PERL" = x; then DX_PERL="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_PERL=$ac_pt_DX_PERL fi else DX_PERL="$ac_cv_path_DX_PERL" fi if test "$DX_FLAG_doc$DX_PERL" = 1; then { $as_echo "$as_me:$LINENO: WARNING: perl not found - will not generate any doxygen documentation" >&5 $as_echo "$as_me: WARNING: perl not found - will not generate any doxygen documentation" >&2;} DX_FLAG_doc=0 fi : fi if test "$DX_FLAG_doc" = 1; then if :; then DX_COND_doc_TRUE= DX_COND_doc_FALSE='#' else DX_COND_doc_TRUE='#' DX_COND_doc_FALSE= fi DX_ENV="$DX_ENV PERL_PATH='$DX_PERL'" : else if false; then DX_COND_doc_TRUE= DX_COND_doc_FALSE='#' else DX_COND_doc_TRUE='#' DX_COND_doc_FALSE= fi : fi # Dot for graphics: # Check whether --enable-doxygen-dot was given. if test "${enable_doxygen_dot+set}" = set; then enableval=$enable_doxygen_dot; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_dot=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-dot requires doxygen-dot" >&5 $as_echo "$as_me: error: doxygen-dot requires doxygen-dot" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_dot=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-dot" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-dot" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_dot=1 test "$DX_FLAG_doc" = "1" || DX_FLAG_dot=0 fi if test "$DX_FLAG_dot" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dot", so it can be a program name with args. set dummy ${ac_tool_prefix}dot; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_DOT+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_DOT in [\\/]* | ?:[\\/]*) ac_cv_path_DX_DOT="$DX_DOT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_DOT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_DOT=$ac_cv_path_DX_DOT if test -n "$DX_DOT"; then { $as_echo "$as_me:$LINENO: result: $DX_DOT" >&5 $as_echo "$DX_DOT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_DOT"; then ac_pt_DX_DOT=$DX_DOT # Extract the first word of "dot", so it can be a program name with args. set dummy dot; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_DOT+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_DOT in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_DOT="$ac_pt_DX_DOT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_DOT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_DOT=$ac_cv_path_ac_pt_DX_DOT if test -n "$ac_pt_DX_DOT"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_DOT" >&5 $as_echo "$ac_pt_DX_DOT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_DOT" = x; then DX_DOT="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_DOT=$ac_pt_DX_DOT fi else DX_DOT="$ac_cv_path_DX_DOT" fi if test "$DX_FLAG_dot$DX_DOT" = 1; then { $as_echo "$as_me:$LINENO: WARNING: dot not found - will not generate graphics for doxygen documentation" >&5 $as_echo "$as_me: WARNING: dot not found - will not generate graphics for doxygen documentation" >&2;} DX_FLAG_dot=0 fi : fi if test "$DX_FLAG_dot" = 1; then if :; then DX_COND_dot_TRUE= DX_COND_dot_FALSE='#' else DX_COND_dot_TRUE='#' DX_COND_dot_FALSE= fi DX_ENV="$DX_ENV HAVE_DOT='YES'" DX_ENV="$DX_ENV DOT_PATH='`expr ".$DX_DOT" : '\(\.\)[^/]*$' \| "x$DX_DOT" : 'x\(.*\)/[^/]*$'`'" : else if false; then DX_COND_dot_TRUE= DX_COND_dot_FALSE='#' else DX_COND_dot_TRUE='#' DX_COND_dot_FALSE= fi DX_ENV="$DX_ENV HAVE_DOT='NO'" : fi # Man pages generation: # Check whether --enable-doxygen-man was given. if test "${enable_doxygen_man+set}" = set; then enableval=$enable_doxygen_man; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_man=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-man requires doxygen-man" >&5 $as_echo "$as_me: error: doxygen-man requires doxygen-man" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_man=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-man" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-man" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_man=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_man=0 fi if test "$DX_FLAG_man" = 1; then : fi if test "$DX_FLAG_man" = 1; then if :; then DX_COND_man_TRUE= DX_COND_man_FALSE='#' else DX_COND_man_TRUE='#' DX_COND_man_FALSE= fi DX_ENV="$DX_ENV GENERATE_MAN='YES'" : else if false; then DX_COND_man_TRUE= DX_COND_man_FALSE='#' else DX_COND_man_TRUE='#' DX_COND_man_FALSE= fi DX_ENV="$DX_ENV GENERATE_MAN='NO'" : fi # RTF file generation: # Check whether --enable-doxygen-rtf was given. if test "${enable_doxygen_rtf+set}" = set; then enableval=$enable_doxygen_rtf; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_rtf=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-rtf requires doxygen-rtf" >&5 $as_echo "$as_me: error: doxygen-rtf requires doxygen-rtf" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_rtf=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-rtf" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-rtf" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_rtf=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_rtf=0 fi if test "$DX_FLAG_rtf" = 1; then : fi if test "$DX_FLAG_rtf" = 1; then if :; then DX_COND_rtf_TRUE= DX_COND_rtf_FALSE='#' else DX_COND_rtf_TRUE='#' DX_COND_rtf_FALSE= fi DX_ENV="$DX_ENV GENERATE_RTF='YES'" : else if false; then DX_COND_rtf_TRUE= DX_COND_rtf_FALSE='#' else DX_COND_rtf_TRUE='#' DX_COND_rtf_FALSE= fi DX_ENV="$DX_ENV GENERATE_RTF='NO'" : fi # XML file generation: # Check whether --enable-doxygen-xml was given. if test "${enable_doxygen_xml+set}" = set; then enableval=$enable_doxygen_xml; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_xml=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-xml requires doxygen-xml" >&5 $as_echo "$as_me: error: doxygen-xml requires doxygen-xml" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_xml=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-xml" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-xml" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_xml=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_xml=0 fi if test "$DX_FLAG_xml" = 1; then : fi if test "$DX_FLAG_xml" = 1; then if :; then DX_COND_xml_TRUE= DX_COND_xml_FALSE='#' else DX_COND_xml_TRUE='#' DX_COND_xml_FALSE= fi DX_ENV="$DX_ENV GENERATE_XML='YES'" : else if false; then DX_COND_xml_TRUE= DX_COND_xml_FALSE='#' else DX_COND_xml_TRUE='#' DX_COND_xml_FALSE= fi DX_ENV="$DX_ENV GENERATE_XML='NO'" : fi # (Compressed) HTML help generation: # Check whether --enable-doxygen-chm was given. if test "${enable_doxygen_chm+set}" = set; then enableval=$enable_doxygen_chm; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_chm=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-chm requires doxygen-chm" >&5 $as_echo "$as_me: error: doxygen-chm requires doxygen-chm" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_chm=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-chm" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-chm" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_chm=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_chm=0 fi if test "$DX_FLAG_chm" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}hhc", so it can be a program name with args. set dummy ${ac_tool_prefix}hhc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_HHC+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_HHC in [\\/]* | ?:[\\/]*) ac_cv_path_DX_HHC="$DX_HHC" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_HHC="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_HHC=$ac_cv_path_DX_HHC if test -n "$DX_HHC"; then { $as_echo "$as_me:$LINENO: result: $DX_HHC" >&5 $as_echo "$DX_HHC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_HHC"; then ac_pt_DX_HHC=$DX_HHC # Extract the first word of "hhc", so it can be a program name with args. set dummy hhc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_HHC+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_HHC in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_HHC="$ac_pt_DX_HHC" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_HHC="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_HHC=$ac_cv_path_ac_pt_DX_HHC if test -n "$ac_pt_DX_HHC"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_HHC" >&5 $as_echo "$ac_pt_DX_HHC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_HHC" = x; then DX_HHC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_HHC=$ac_pt_DX_HHC fi else DX_HHC="$ac_cv_path_DX_HHC" fi if test "$DX_FLAG_chm$DX_HHC" = 1; then { $as_echo "$as_me:$LINENO: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&5 $as_echo "$as_me: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&2;} DX_FLAG_chm=0 fi : fi if test "$DX_FLAG_chm" = 1; then if :; then DX_COND_chm_TRUE= DX_COND_chm_FALSE='#' else DX_COND_chm_TRUE='#' DX_COND_chm_FALSE= fi DX_ENV="$DX_ENV HHC_PATH='$DX_HHC'" DX_ENV="$DX_ENV GENERATE_HTML='YES'" DX_ENV="$DX_ENV GENERATE_HTMLHELP='YES'" : else if false; then DX_COND_chm_TRUE= DX_COND_chm_FALSE='#' else DX_COND_chm_TRUE='#' DX_COND_chm_FALSE= fi DX_ENV="$DX_ENV GENERATE_HTMLHELP='NO'" : fi # Seperate CHI file generation. # Check whether --enable-doxygen-chi was given. if test "${enable_doxygen_chi+set}" = set; then enableval=$enable_doxygen_chi; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_chi=1 test "$DX_FLAG_chm" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-chi requires doxygen-chi" >&5 $as_echo "$as_me: error: doxygen-chi requires doxygen-chi" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_chi=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-chi" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-chi" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_chi=0 test "$DX_FLAG_chm" = "1" || DX_FLAG_chi=0 fi if test "$DX_FLAG_chi" = 1; then : fi if test "$DX_FLAG_chi" = 1; then if :; then DX_COND_chi_TRUE= DX_COND_chi_FALSE='#' else DX_COND_chi_TRUE='#' DX_COND_chi_FALSE= fi DX_ENV="$DX_ENV GENERATE_CHI='YES'" : else if false; then DX_COND_chi_TRUE= DX_COND_chi_FALSE='#' else DX_COND_chi_TRUE='#' DX_COND_chi_FALSE= fi DX_ENV="$DX_ENV GENERATE_CHI='NO'" : fi # Plain HTML pages generation: # Check whether --enable-doxygen-html was given. if test "${enable_doxygen_html+set}" = set; then enableval=$enable_doxygen_html; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_html=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-html requires doxygen-html" >&5 $as_echo "$as_me: error: doxygen-html requires doxygen-html" >&2;} { (exit 1); exit 1; }; } test "$DX_FLAG_chm" = "0" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-html contradicts doxygen-html" >&5 $as_echo "$as_me: error: doxygen-html contradicts doxygen-html" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_html=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-html" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-html" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_html=1 test "$DX_FLAG_doc" = "1" || DX_FLAG_html=0 test "$DX_FLAG_chm" = "0" || DX_FLAG_html=0 fi if test "$DX_FLAG_html" = 1; then : fi if test "$DX_FLAG_html" = 1; then if :; then DX_COND_html_TRUE= DX_COND_html_FALSE='#' else DX_COND_html_TRUE='#' DX_COND_html_FALSE= fi DX_ENV="$DX_ENV GENERATE_HTML='YES'" : else if false; then DX_COND_html_TRUE= DX_COND_html_FALSE='#' else DX_COND_html_TRUE='#' DX_COND_html_FALSE= fi test "$DX_FLAG_chm" = 1 || DX_ENV="$DX_ENV GENERATE_HTML='NO'" : fi # PostScript file generation: # Check whether --enable-doxygen-ps was given. if test "${enable_doxygen_ps+set}" = set; then enableval=$enable_doxygen_ps; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_ps=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-ps requires doxygen-ps" >&5 $as_echo "$as_me: error: doxygen-ps requires doxygen-ps" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_ps=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-ps" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-ps" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_ps=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_ps=0 fi if test "$DX_FLAG_ps" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}latex", so it can be a program name with args. set dummy ${ac_tool_prefix}latex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_LATEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_LATEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_LATEX="$DX_LATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_LATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_LATEX=$ac_cv_path_DX_LATEX if test -n "$DX_LATEX"; then { $as_echo "$as_me:$LINENO: result: $DX_LATEX" >&5 $as_echo "$DX_LATEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_LATEX"; then ac_pt_DX_LATEX=$DX_LATEX # Extract the first word of "latex", so it can be a program name with args. set dummy latex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_LATEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_LATEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_LATEX="$ac_pt_DX_LATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_LATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_LATEX=$ac_cv_path_ac_pt_DX_LATEX if test -n "$ac_pt_DX_LATEX"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_LATEX" >&5 $as_echo "$ac_pt_DX_LATEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_LATEX" = x; then DX_LATEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_LATEX=$ac_pt_DX_LATEX fi else DX_LATEX="$ac_cv_path_DX_LATEX" fi if test "$DX_FLAG_ps$DX_LATEX" = 1; then { $as_echo "$as_me:$LINENO: WARNING: latex not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: latex not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args. set dummy ${ac_tool_prefix}makeindex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_MAKEINDEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX if test -n "$DX_MAKEINDEX"; then { $as_echo "$as_me:$LINENO: result: $DX_MAKEINDEX" >&5 $as_echo "$DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_MAKEINDEX"; then ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX # Extract the first word of "makeindex", so it can be a program name with args. set dummy makeindex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_MAKEINDEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX if test -n "$ac_pt_DX_MAKEINDEX"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_MAKEINDEX" >&5 $as_echo "$ac_pt_DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_MAKEINDEX" = x; then DX_MAKEINDEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX fi else DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX" fi if test "$DX_FLAG_ps$DX_MAKEINDEX" = 1; then { $as_echo "$as_me:$LINENO: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dvips", so it can be a program name with args. set dummy ${ac_tool_prefix}dvips; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_DVIPS+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_DVIPS in [\\/]* | ?:[\\/]*) ac_cv_path_DX_DVIPS="$DX_DVIPS" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_DVIPS=$ac_cv_path_DX_DVIPS if test -n "$DX_DVIPS"; then { $as_echo "$as_me:$LINENO: result: $DX_DVIPS" >&5 $as_echo "$DX_DVIPS" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_DVIPS"; then ac_pt_DX_DVIPS=$DX_DVIPS # Extract the first word of "dvips", so it can be a program name with args. set dummy dvips; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_DVIPS+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_DVIPS in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_DVIPS="$ac_pt_DX_DVIPS" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_DVIPS=$ac_cv_path_ac_pt_DX_DVIPS if test -n "$ac_pt_DX_DVIPS"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_DVIPS" >&5 $as_echo "$ac_pt_DX_DVIPS" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_DVIPS" = x; then DX_DVIPS="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_DVIPS=$ac_pt_DX_DVIPS fi else DX_DVIPS="$ac_cv_path_DX_DVIPS" fi if test "$DX_FLAG_ps$DX_DVIPS" = 1; then { $as_echo "$as_me:$LINENO: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args. set dummy ${ac_tool_prefix}egrep; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_EGREP=$ac_cv_path_DX_EGREP if test -n "$DX_EGREP"; then { $as_echo "$as_me:$LINENO: result: $DX_EGREP" >&5 $as_echo "$DX_EGREP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_EGREP"; then ac_pt_DX_EGREP=$DX_EGREP # Extract the first word of "egrep", so it can be a program name with args. set dummy egrep; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP if test -n "$ac_pt_DX_EGREP"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_EGREP" >&5 $as_echo "$ac_pt_DX_EGREP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_EGREP" = x; then DX_EGREP="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_EGREP=$ac_pt_DX_EGREP fi else DX_EGREP="$ac_cv_path_DX_EGREP" fi if test "$DX_FLAG_ps$DX_EGREP" = 1; then { $as_echo "$as_me:$LINENO: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi : fi if test "$DX_FLAG_ps" = 1; then if :; then DX_COND_ps_TRUE= DX_COND_ps_FALSE='#' else DX_COND_ps_TRUE='#' DX_COND_ps_FALSE= fi : else if false; then DX_COND_ps_TRUE= DX_COND_ps_FALSE='#' else DX_COND_ps_TRUE='#' DX_COND_ps_FALSE= fi : fi # PDF file generation: # Check whether --enable-doxygen-pdf was given. if test "${enable_doxygen_pdf+set}" = set; then enableval=$enable_doxygen_pdf; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_pdf=1 test "$DX_FLAG_doc" = "1" \ || { { $as_echo "$as_me:$LINENO: error: doxygen-pdf requires doxygen-pdf" >&5 $as_echo "$as_me: error: doxygen-pdf requires doxygen-pdf" >&2;} { (exit 1); exit 1; }; } ;; #( n|N|no|No|NO) DX_FLAG_pdf=0 ;; #( *) { { $as_echo "$as_me:$LINENO: error: invalid value '$enableval' given to doxygen-pdf" >&5 $as_echo "$as_me: error: invalid value '$enableval' given to doxygen-pdf" >&2;} { (exit 1); exit 1; }; } ;; esac else DX_FLAG_pdf=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_pdf=0 fi if test "$DX_FLAG_pdf" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pdflatex", so it can be a program name with args. set dummy ${ac_tool_prefix}pdflatex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_PDFLATEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_PDFLATEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_PDFLATEX="$DX_PDFLATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_PDFLATEX=$ac_cv_path_DX_PDFLATEX if test -n "$DX_PDFLATEX"; then { $as_echo "$as_me:$LINENO: result: $DX_PDFLATEX" >&5 $as_echo "$DX_PDFLATEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_PDFLATEX"; then ac_pt_DX_PDFLATEX=$DX_PDFLATEX # Extract the first word of "pdflatex", so it can be a program name with args. set dummy pdflatex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_PDFLATEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_PDFLATEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_PDFLATEX="$ac_pt_DX_PDFLATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_PDFLATEX=$ac_cv_path_ac_pt_DX_PDFLATEX if test -n "$ac_pt_DX_PDFLATEX"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_PDFLATEX" >&5 $as_echo "$ac_pt_DX_PDFLATEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_PDFLATEX" = x; then DX_PDFLATEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_PDFLATEX=$ac_pt_DX_PDFLATEX fi else DX_PDFLATEX="$ac_cv_path_DX_PDFLATEX" fi if test "$DX_FLAG_pdf$DX_PDFLATEX" = 1; then { $as_echo "$as_me:$LINENO: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&5 $as_echo "$as_me: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&2;} DX_FLAG_pdf=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args. set dummy ${ac_tool_prefix}makeindex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_MAKEINDEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX if test -n "$DX_MAKEINDEX"; then { $as_echo "$as_me:$LINENO: result: $DX_MAKEINDEX" >&5 $as_echo "$DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_MAKEINDEX"; then ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX # Extract the first word of "makeindex", so it can be a program name with args. set dummy makeindex; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_MAKEINDEX+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX if test -n "$ac_pt_DX_MAKEINDEX"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_MAKEINDEX" >&5 $as_echo "$ac_pt_DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_MAKEINDEX" = x; then DX_MAKEINDEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX fi else DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX" fi if test "$DX_FLAG_pdf$DX_MAKEINDEX" = 1; then { $as_echo "$as_me:$LINENO: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&5 $as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&2;} DX_FLAG_pdf=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args. set dummy ${ac_tool_prefix}egrep; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_DX_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else case $DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_EGREP=$ac_cv_path_DX_EGREP if test -n "$DX_EGREP"; then { $as_echo "$as_me:$LINENO: result: $DX_EGREP" >&5 $as_echo "$DX_EGREP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_EGREP"; then ac_pt_DX_EGREP=$DX_EGREP # Extract the first word of "egrep", so it can be a program name with args. set dummy egrep; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_DX_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else case $ac_pt_DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP if test -n "$ac_pt_DX_EGREP"; then { $as_echo "$as_me:$LINENO: result: $ac_pt_DX_EGREP" >&5 $as_echo "$ac_pt_DX_EGREP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_EGREP" = x; then DX_EGREP="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_EGREP=$ac_pt_DX_EGREP fi else DX_EGREP="$ac_cv_path_DX_EGREP" fi if test "$DX_FLAG_pdf$DX_EGREP" = 1; then { $as_echo "$as_me:$LINENO: WARNING: egrep not found - will not generate doxygen PDF documentation" >&5 $as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PDF documentation" >&2;} DX_FLAG_pdf=0 fi : fi if test "$DX_FLAG_pdf" = 1; then if :; then DX_COND_pdf_TRUE= DX_COND_pdf_FALSE='#' else DX_COND_pdf_TRUE='#' DX_COND_pdf_FALSE= fi : else if false; then DX_COND_pdf_TRUE= DX_COND_pdf_FALSE='#' else DX_COND_pdf_TRUE='#' DX_COND_pdf_FALSE= fi : fi # LaTeX generation for PS and/or PDF: if test "$DX_FLAG_ps" = 1 || test "$DX_FLAG_pdf" = 1; then if :; then DX_COND_latex_TRUE= DX_COND_latex_FALSE='#' else DX_COND_latex_TRUE='#' DX_COND_latex_FALSE= fi DX_ENV="$DX_ENV GENERATE_LATEX='YES'" else if false; then DX_COND_latex_TRUE= DX_COND_latex_FALSE='#' else DX_COND_latex_TRUE='#' DX_COND_latex_FALSE= fi DX_ENV="$DX_ENV GENERATE_LATEX='NO'" fi # Paper size for PS and/or PDF: case "$DOXYGEN_PAPER_SIZE" in #( "") DOXYGEN_PAPER_SIZE="" ;; #( a4wide|a4|letter|legal|executive) DX_ENV="$DX_ENV PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" ;; #( *) { { $as_echo "$as_me:$LINENO: error: unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" >&5 $as_echo "$as_me: error: unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" >&2;} { (exit 1); exit 1; }; } ;; esac #For debugging: #echo DX_FLAG_doc=$DX_FLAG_doc #echo DX_FLAG_dot=$DX_FLAG_dot #echo DX_FLAG_man=$DX_FLAG_man #echo DX_FLAG_html=$DX_FLAG_html #echo DX_FLAG_chm=$DX_FLAG_chm #echo DX_FLAG_chi=$DX_FLAG_chi #echo DX_FLAG_rtf=$DX_FLAG_rtf #echo DX_FLAG_xml=$DX_FLAG_xml #echo DX_FLAG_pdf=$DX_FLAG_pdf #echo DX_FLAG_ps=$DX_FLAG_ps #echo DX_ENV=$DX_ENV cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"INSTALL_LTDL\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"INSTALL_LTDL\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"CONVENIENCE_LTDL\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"CONVENIENCE_LTDL\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi LT_CONFIG_H=config.h _ltdl_libobjs= _ltdl_ltlibobjs= if test -n "$_LT_LIBOBJS"; then # Remove the extension. _lt_sed_drop_objext='s/\.o$//;s/\.obj$//' for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext" _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo" done fi ltdl_LIBOBJS=$_ltdl_libobjs ltdl_LTLIBOBJS=$_ltdl_ltlibobjs if test -z "${STACKTRACE_TRUE}" && test -z "${STACKTRACE_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"STACKTRACE\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"STACKTRACE\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_doc\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_doc\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_doc\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_doc\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_dot\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_dot\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_dot\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_dot\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_man\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_man\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_man\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_man\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_rtf\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_rtf\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_rtf\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_rtf\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_xml\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_xml\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_xml\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_xml\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_chm\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_chm\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_chm\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_chm\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_chi\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_chi\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_chi\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_chi\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_html\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_html\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_html\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_html\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_ps\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_ps\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_ps\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_ps\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_pdf\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_pdf\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_pdf\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_pdf\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_latex\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_latex\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"DX_COND_latex\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"DX_COND_latex\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by diagnostics $as_me 0.3.3, which was generated by GNU Autoconf 2.63. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTION]... [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ diagnostics config.status 0.3.3 configured by $0, generated by GNU Autoconf 2.63, with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header { $as_echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; };; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { $as_echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # PACKAGE="$PACKAGE" AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_ld_CXX='`$ECHO "$hardcode_libdir_flag_spec_ld_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in GREP \ EGREP \ FGREP \ OBJDUMP \ SED \ lt_SP2NL \ lt_NL2SP \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ NM \ SHELL \ ECHO \ LD \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ nm_file_list_spec \ LN_S \ reload_flag \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ old_striplib \ striplib \ compiler_lib_search_dirs \ predep_objects \ postdep_objects \ predeps \ postdeps \ compiler_lib_search_path \ LD_CXX \ compiler_CXX \ reload_flag_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ lt_prog_compiler_pic_CXX \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_static_CXX \ lt_cv_prog_compiler_c_o_CXX \ export_dynamic_flag_spec_CXX \ whole_archive_flag_spec_CXX \ compiler_needs_object_CXX \ with_gnu_ld_CXX \ allow_undefined_flag_CXX \ no_undefined_flag_CXX \ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_flag_spec_ld_CXX \ hardcode_libdir_separator_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX \ file_list_spec_CXX \ compiler_lib_search_dirs_CXX \ predep_objects_CXX \ postdep_objects_CXX \ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec \ reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ reload_cmds_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ archive_cmds_CXX \ archive_expsym_cmds_CXX \ module_cmds_CXX \ module_expsym_cmds_CXX \ export_symbols_cmds_CXX \ prelink_cmds_CXX \ postlink_cmds_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' ac_aux_dir='$ac_aux_dir' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "diagnostics/features.hpp") CONFIG_COMMANDS="$CONFIG_COMMANDS diagnostics/features.hpp" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "diagnostics/extensions/stacktrace/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/extensions/stacktrace/Makefile" ;; "diagnostics/basic_exceptions/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/basic_exceptions/Makefile" ;; "diagnostics/unittest/test_system/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/unittest/test_system/Makefile" ;; "diagnostics/extensions/memory/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/extensions/memory/Makefile" ;; "diagnostics/extensions/instrumentation/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/extensions/instrumentation/Makefile" ;; "diagnostics/unittest/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/unittest/Makefile" ;; "diagnostics/macros/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/macros/Makefile" ;; "diagnostics/frame/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/frame/Makefile" ;; "diagnostics/extensions/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/extensions/Makefile" ;; "diagnostics/util/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/util/Makefile" ;; "diagnostics/logger/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/logger/Makefile" ;; "diagnostics/Makefile") CONFIG_FILES="$CONFIG_FILES diagnostics/Makefile" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 $as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || { $as_echo "$as_me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=' ' ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\).*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\).*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 $as_echo "$as_me: error: could not setup config files machinery" >&2;} { (exit 1); exit 1; }; } _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 $as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 $as_echo "$as_me: error: could not setup config headers machinery" >&2;} { (exit 1); exit 1; }; } fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 $as_echo "$as_me: error: invalid tag $ac_tag" >&2;} { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 $as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} { (exit 1); exit 1; }; };; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ac_file_inputs="$ac_file_inputs '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p ' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 $as_echo "$as_me: error: could not create -" >&2;} { (exit 1); exit 1; }; } fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "diagnostics/features.hpp":C) ac_prefix_conf_OUT=`printf '%s\n' diagnostics/features.hpp` ac_prefix_conf_DEF=`printf '%s\n' _$ac_prefix_conf_OUT | sed -e "y:abcdefghijklmnopqrstuvwxyz:ABCDEFGHIJKLMNOPQRSTUVWXYZ:" -e "s/[^abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g"` ac_prefix_conf_PKG=`printf '%s\n' $PACKAGE` ac_prefix_conf_LOW=`printf '%s\n' _$ac_prefix_conf_PKG | sed -e "y:ABCDEFGHIJKLMNOPQRSTUVWXYZ-:abcdefghijklmnopqrstuvwxyz_:"` ac_prefix_conf_UPP=`printf '%s\n' $ac_prefix_conf_PKG | sed -e "y:abcdefghijklmnopqrstuvwxyz-:ABCDEFGHIJKLMNOPQRSTUVWXYZ_:" -e "/^[0123456789]/s/^/_/"` ac_prefix_conf_INP=`printf '%s\n' "" | sed -e 's/ *//'` if test ".$ac_prefix_conf_INP" = "."; then for ac_file in : $CONFIG_HEADERS; do test "_$ac_file" = _: && continue case "$ac_file" in *.h) ac_prefix_conf_INP=$ac_file ;; *) esac test ".$ac_prefix_conf_INP" != "." && break done fi if test ".$ac_prefix_conf_INP" = "."; then case "$ac_prefix_conf_OUT" in */*) ac_prefix_conf_INP=`basename "$ac_prefix_conf_OUT"` ;; *-*) ac_prefix_conf_INP=`printf '%s\n' "$ac_prefix_conf_OUT" | sed -e "s/[abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_]*-//"` ;; *) ac_prefix_conf_INP=config.h ;; esac fi if test -z "$ac_prefix_conf_PKG" ; then { { $as_echo "$as_me:$LINENO: error: no prefix for _PREFIX_PKG_CONFIG_H" >&5 $as_echo "$as_me: error: no prefix for _PREFIX_PKG_CONFIG_H" >&2;} { (exit 1); exit 1; }; } else if test ! -f "$ac_prefix_conf_INP" ; then if test -f "$srcdir/$ac_prefix_conf_INP" ; then ac_prefix_conf_INP="$srcdir/$ac_prefix_conf_INP" fi fi { $as_echo "$as_me:$LINENO: creating $ac_prefix_conf_OUT - prefix $ac_prefix_conf_UPP for $ac_prefix_conf_INP defines" >&5 $as_echo "$as_me: creating $ac_prefix_conf_OUT - prefix $ac_prefix_conf_UPP for $ac_prefix_conf_INP defines" >&6;} if test -f $ac_prefix_conf_INP ; then printf '%s\n' "s/#undef *\\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_]\\)/#undef $ac_prefix_conf_UPP""_\\1/" > conftest.prefix printf '%s\n' "s/#undef *\\([abcdefghijklmnopqrstuvwxyz]\\)/#undef $ac_prefix_conf_LOW""_\\1/" >> conftest.prefix printf '%s\n' "s/#define *\\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_][abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_]*\\)\\(.*\\)/#ifndef $ac_prefix_conf_UPP""_\\1 \\" >> conftest.prefix printf '%s\n' "#define $ac_prefix_conf_UPP""_\\1 \\2 \\" >> conftest.prefix printf '%s\n' "#endif/" >>conftest.prefix printf '%s\n' "s/#define *\\([abcdefghijklmnopqrstuvwxyz][abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_]*\\)\\(.*\\)/#ifndef $ac_prefix_conf_LOW""_\\1 \\" >> conftest.prefix printf '%s\n' "#define $ac_prefix_conf_LOW""_\\1 \\2 \\" >> conftest.prefix printf '%s\n' "#endif/" >> conftest.prefix # now executing _script on _DEF input to create _OUT output file printf '%s\n' "#ifndef $ac_prefix_conf_DEF" >$tmp/pconfig.h printf '%s\n' "#define $ac_prefix_conf_DEF 1" >>$tmp/pconfig.h printf '%s\n' ' ' >>$tmp/pconfig.h printf '%s\n' /'*' $ac_prefix_conf_OUT. Generated automatically at end of configure. '*'/ >>$tmp/pconfig.h sed -f conftest.prefix $ac_prefix_conf_INP >>$tmp/pconfig.h printf '%s\n' ' ' >>$tmp/pconfig.h printf '%s\n' '/* once:' $ac_prefix_conf_DEF '*/' >>$tmp/pconfig.h printf '%s\n' "#endif" >>$tmp/pconfig.h if cmp -s $ac_prefix_conf_OUT $tmp/pconfig.h 2>/dev/null; then { $as_echo "$as_me:$LINENO: $ac_prefix_conf_OUT is unchanged" >&5 $as_echo "$as_me: $ac_prefix_conf_OUT is unchanged" >&6;} else ac_dir=`$as_dirname -- "$ac_prefix_conf_OUT" || $as_expr X"$ac_prefix_conf_OUT" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_prefix_conf_OUT" : 'X\(//\)[^/]' \| \ X"$ac_prefix_conf_OUT" : 'X\(//\)$' \| \ X"$ac_prefix_conf_OUT" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_prefix_conf_OUT" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } rm -f "$ac_prefix_conf_OUT" mv $tmp/pconfig.h "$ac_prefix_conf_OUT" fi cp conftest.prefix _configs.sed else { { $as_echo "$as_me:$LINENO: error: input file $ac_prefix_conf_INP does not exist - skip generating $ac_prefix_conf_OUT" >&5 $as_echo "$as_me: error: input file $ac_prefix_conf_INP does not exist - skip generating $ac_prefix_conf_OUT" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.* fi ;; "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir=$dirpart/$fdir case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010 Free Software Foundation, # Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="CXX " # ### BEGIN LIBTOOL CONFIG # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # A BSD- or MS-compatible name lister. NM=$lt_NM # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The name of the directory that contains temporary libtool files. objdir=$objdir # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # The root where to search for dependent libraries,and in which our libraries should be installed. lt_sysroot=$lt_sysroot # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # If ld is used when linking, flag to hardcode \$libdir into a binary # during linking. This must work even if \$libdir does not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects postdep_objects=$lt_postdep_objects predeps=$lt_predeps postdeps=$lt_postdeps # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) if test x"$xsi_shell" = xyes; then sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ func_dirname ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_basename ()$/,/^} # func_basename /c\ func_basename ()\ {\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ func_dirname_and_basename ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ func_stripname ()\ {\ \ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ \ # positional parameters, so assign one to ordinary parameter first.\ \ func_stripname_result=${3}\ \ func_stripname_result=${func_stripname_result#"${1}"}\ \ func_stripname_result=${func_stripname_result%"${2}"}\ } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ func_split_long_opt ()\ {\ \ func_split_long_opt_name=${1%%=*}\ \ func_split_long_opt_arg=${1#*=}\ } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ func_split_short_opt ()\ {\ \ func_split_short_opt_arg=${1#??}\ \ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ func_lo2o ()\ {\ \ case ${1} in\ \ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ \ *) func_lo2o_result=${1} ;;\ \ esac\ } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_xform ()$/,/^} # func_xform /c\ func_xform ()\ {\ func_xform_result=${1%.*}.lo\ } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_arith ()$/,/^} # func_arith /c\ func_arith ()\ {\ func_arith_result=$(( $* ))\ } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_len ()$/,/^} # func_len /c\ func_len ()\ {\ func_len_result=${#1}\ } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$lt_shell_append" = xyes; then sed -e '/^func_append ()$/,/^} # func_append /c\ func_append ()\ {\ eval "${1}+=\\${2}"\ } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ func_append_quoted ()\ {\ \ func_quote_for_eval "${2}"\ \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then { $as_echo "$as_me:$LINENO: WARNING: Unable to substitute extended shell functions in $ofile" >&5 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" cat <<_LT_EOF >> "$ofile" # ### BEGIN LIBTOOL TAG CONFIG: CXX # The linker used to build libraries. LD=$lt_LD_CXX # A language specific compiler. CC=$lt_compiler_CXX # Is the compiler the GNU compiler? with_gcc=$GCC_CXX # How to create reloadable object files. reload_flag=$lt_reload_flag_CXX reload_cmds=$lt_reload_cmds_CXX # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_CXX # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_CXX # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_CXX # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object_CXX # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds_CXX archive_expsym_cmds=$lt_archive_expsym_cmds_CXX # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds_CXX module_expsym_cmds=$lt_module_expsym_cmds_CXX # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld_CXX # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_CXX # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_CXX # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX # If ld is used when linking, flag to hardcode \$libdir into a binary # during linking. This must work even if \$libdir does not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute_CXX # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L_CXX # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic_CXX # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath_CXX # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_CXX # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_CXX # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_CXX # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_CXX # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_CXX # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds_CXX # Specify filename containing input files. file_list_spec=$lt_file_list_spec_CXX # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_CXX # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects_CXX postdep_objects=$lt_postdep_objects_CXX predeps=$lt_predeps_CXX postdeps=$lt_postdeps_CXX # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_CXX # ### END LIBTOOL TAG CONFIG: CXX _LT_EOF ;; esac done # for ac_tag { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 $as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi # # CONFIG_SUBDIRS section. # if test "$no_recursion" != yes; then # Remove --cache-file, --srcdir, and --disable-option-checking arguments # so they do not pile up. ac_sub_configure_args= ac_prev= eval "set x $ac_configure_args" shift for ac_arg do if test -n "$ac_prev"; then ac_prev= continue fi case $ac_arg in -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \ | --c=*) ;; --config-cache | -C) ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ;; --disable-option-checking) ;; *) case $ac_arg in *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;; esac done # Always prepend --prefix to ensure using the same prefix # in subdir configurations. ac_arg="--prefix=$prefix" case $ac_arg in *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" # Pass --silent if test "$silent" = yes; then ac_sub_configure_args="--silent $ac_sub_configure_args" fi # Always prepend --disable-option-checking to silence warnings, since # different subdirs can have different --enable and --with options. ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args" ac_popdir=`pwd` for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue # Do not complain, so a configure script can configure whichever # parts of a large source tree are present. test -d "$srcdir/$ac_dir" || continue ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" $as_echo "$as_me:$LINENO: $ac_msg" >&5 $as_echo "$ac_msg" >&6 { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" # Check for guested configure; otherwise get Cygnus style configure. if test -f "$ac_srcdir/configure.gnu"; then ac_sub_configure=$ac_srcdir/configure.gnu elif test -f "$ac_srcdir/configure"; then ac_sub_configure=$ac_srcdir/configure elif test -f "$ac_srcdir/configure.in"; then # This should be Cygnus configure. ac_sub_configure=$ac_aux_dir/configure else { $as_echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5 $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;} ac_sub_configure= fi # The recursion is here. if test -n "$ac_sub_configure"; then # Make the cache file name correct relative to the subdirectory. case $cache_file in [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; *) # Relative name. ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; esac { $as_echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} # The eval makes quoting arguments work. eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || { { $as_echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5 $as_echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;} { (exit 1); exit 1; }; } fi cd "$ac_popdir" done fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diagnostics-0.3.3/configure.ac0000644000076500000240000001072611567466316013256 00000000000000# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. # replace PACKAGENAME, EMAIL and PATH_TO_FEATURES_H as appropriate and add # further checks as required # running autoscan and then comparing configure.ac and configure.scan is very # useful AC_PREREQ(2.59) AC_INIT([diagnostics],[0.3.3],[christian@schallhart.net]) AC_CONFIG_SRCDIR([diagnostics/annotations.hpp]) AC_CONFIG_AUX_DIR(config) AC_CONFIG_HEADER(config.h) # suppress -I. -I. -I../.., includes explicitly set AM_INIT_AUTOMAKE([1.9 nostdinc -Wall -Wno-portability]) AC_CONFIG_MACRO_DIR([m4]) AC_SUBST(ac_aux_dir) AX_PREFIX_CONFIG_H(diagnostics/features.hpp) AC_LANG([C++]) # Checks for programs. AC_PROG_CXX AC_PROG_CC AC_PROG_CPP AC_PROG_CXXCPP AC_PROG_INSTALL AC_PROG_LN_S AC_PROG_MAKE_SET AC_PROG_AWK # new libtool versions: # LT_INIT # LTDL_INIT AC_LIBLTDL_CONVENIENCE AC_WITH_LTDL AC_PROG_LIBTOOL AC_CHECK_PROG([PKGCONFIG],[pkg-config],[yes],[no]) if test "x$PKGCONFIG" = "xno" ; then AC_MSG_WARN([pkg-config not found in PATH. Please install it first. ACE will not be used.]) AC_DEFINE([HAVE_ACE], [0], [Define to 1, if ACE is available on your system]) else PKG_PROG_PKG_CONFIG PKG_CHECK_MODULES(ACE,ACE, [ AC_DEFINE([HAVE_ACE], [1], [Define to 1, if ACE is available on your system]) LDFLAGS="$LDFLAGS -lACE -lpthread"], [ AC_DEFINE([HAVE_ACE], [0], [Define to 1, if ACE is available on your system]) ]) fi AC_ARG_ENABLE([install-headers],[ --enable-install-headers Install header files during make install], [if test "x$enableval" != "xno" ; then AC_SUBST(enable_install_headers,[--install-headers]) else AC_SUBST(enable_install_headers,[""]) fi], AC_SUBST(enable_install_headers,[""]) ) AC_ARG_ENABLE([update-makefiles],[ --disable-update-makefiles Do not update any Makefile.am], [if test "x$enableval" = "xno" ; then AC_SUBST(disable_update_makefiles,[--disable]) else AC_SUBST(disable_update_makefiles,[""]) fi], AC_SUBST(disable_update_makefiles,[""]) ) if test "x$DIAGNOSTICSLEVEL" = "x" ; then AC_SUBST(DIAGNOSTICSLEVEL,[2]) else AC_SUBST(DIAGNOSTICSLEVEL,[$DIAGNOSTICSLEVEL]) fi # Checks for header files. AC_CHECK_HEADERS([string \ algorithm \ exception \ cstdio \ cstdlib \ cassert \ fstream \ map \ stack \ sstream \ iostream \ utility \ limits \ cmath \ vector], [], AC_MSG_ERROR([Essential header $ac_header missing])) AC_CHECK_PROG([enable_stacktrace],[addr2line],[yes],[no]) if test x$enable_stacktrace = xyes ; then AC_CHECK_HEADERS([link.h], [enable_stacktrace=yes ; break], [enable_stacktrace=no]) fi # unwinding doesn't work properly on ARM if test x$build = xarm-unknown-linux-gnueabi ; then enable_stacktrace=no fi AM_CONDITIONAL(STACKTRACE, test x$enable_stacktrace = xyes) # Checks for typedefs, structures, and compiler characteristics. AC_TYPE_PID_T AC_TYPE_SIZE_T AC_CHECK_TYPES([ptrdiff_t]) # Checks for library functions. AC_FUNC_MALLOC AC_CHECK_FUNCS([atexit gettimeofday]) # Files generated by configure AC_CONFIG_FILES([diagnostics/extensions/stacktrace/Makefile diagnostics/basic_exceptions/Makefile diagnostics/unittest/test_system/Makefile diagnostics/extensions/memory/Makefile diagnostics/extensions/instrumentation/Makefile diagnostics/unittest/Makefile diagnostics/macros/Makefile diagnostics/frame/Makefile diagnostics/extensions/Makefile diagnostics/util/Makefile diagnostics/logger/Makefile diagnostics/Makefile Makefile]) DX_HTML_FEATURE(ON) DX_CHM_FEATURE(OFF) DX_CHI_FEATURE(OFF) DX_MAN_FEATURE(OFF) DX_RTF_FEATURE(OFF) DX_XML_FEATURE(OFF) DX_PDF_FEATURE(OFF) DX_PS_FEATURE(OFF) DX_INIT_DOXYGEN(diagnostics, config/doxygen.cfg, doc/dx) AC_OUTPUT diagnostics-0.3.3/COPYING0000644000076500000240000006350410241174567012015 00000000000000 GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. , 1 April 1990 Ty Coon, President of Vice That's all there is to it! diagnostics-0.3.3/debian/0000755000076500000240000000000011567507572012264 500000000000000diagnostics-0.3.3/debian/changelog0000644000076500000240000001435111567507267014063 00000000000000diagnostics (0.3.3-1) unstable; urgency=low * New upstream version (closes: #625163) * Merged all bugfixes * Bumped Standards-Version (no changes) -- Michael Tautschnig Thu, 26 May 2011 16:08:46 +0100 diagnostics (0.3.2-4) unstable; urgency=low * More work on symbol files. * Workaround for failing test on kfreebsd. -- Michael Tautschnig Wed, 16 Mar 2011 20:27:05 +0100 diagnostics (0.3.2-3) unstable; urgency=low * Cleanup symbol files, making all internal stuff optional. -- Michael Tautschnig Wed, 16 Mar 2011 18:59:38 +0100 diagnostics (0.3.2-2) unstable; urgency=low * Fix non-portable use of realpath (closes: #618461) -- Michael Tautschnig Wed, 16 Mar 2011 15:11:13 +0100 diagnostics (0.3.2-1) unstable; urgency=low * New upstream version * Build-dep on libace-dev >= 5.7.7-3 as #591610 has been fixed * Updated symbol files to work with g++ 4.5 (closes: #615659) -- Michael Tautschnig Mon, 28 Feb 2011 10:21:38 +0100 diagnostics (0.3.1-3) unstable; urgency=low * Bumped Standards-Version to 3.9.1 (removed shlibs.local) * Mark stacktrace related symbols arch=!armel without hack (requires dpkg-dev >= 1.15.8), removed duplicates in symbol files * Force HAVE_ACE to 1 in configure.ac because of #591610 (closes: #593044) -- Michael Tautschnig Mon, 16 Aug 2010 11:17:13 +0200 diagnostics (0.3.1-2) unstable; urgency=low * Mark stacktrace related symbols arch=!armel -- Michael Tautschnig Sat, 29 May 2010 09:33:52 +0200 diagnostics (0.3.1-1) unstable; urgency=low * New upstream version - Fixes FTBFS on armel -- Michael Tautschnig Thu, 27 May 2010 16:38:27 +0200 diagnostics (0.3-3) unstable; urgency=low * Fix symbol files for 32bit architectures, once again -- Michael Tautschnig Thu, 22 Apr 2010 13:14:29 +0200 diagnostics (0.3-2) unstable; urgency=low * Fix symbol files for 32bit architectures * Force CXXFLAGS for compiling stacktrace to -O1 -g -- Michael Tautschnig Thu, 22 Apr 2010 11:03:54 +0200 diagnostics (0.3-1) unstable; urgency=low * New upstream version * Bumped Standards-Version (no changes) * Use c++ tagging for symbol files (closes: #574300, #570692) -- Michael Tautschnig Thu, 22 Apr 2010 00:13:40 +0200 diagnostics (0.2.8-1) unstable; urgency=low * New upstream version * Switch to dpkg-source 3.0 (quilt) format * Bumped Standards-Version (no changes) * Updated symbols files (thanks Andreas Moog ) (closes: #562397) * Added ${misc:Depends} to all binary packages -- Michael Tautschnig Sat, 16 Jan 2010 23:27:48 +0100 diagnostics (0.2.7-2) unstable; urgency=low * Updated symbols file for alpha (grrrr) -- Michael Tautschnig Tue, 21 Apr 2009 10:02:11 +0200 diagnostics (0.2.7-1) unstable; urgency=low * New upstream release (updated copyright information) * Bumped Standards-Version (no changes) * Fixed watch file * Improved descriptions -- Michael Tautschnig Sat, 18 Apr 2009 18:49:46 +0200 diagnostics (0.2.6-1) unstable; urgency=low * New upstream release (user exceptions, WIN32 compatibility) -- Michael Tautschnig Sun, 22 Feb 2009 17:52:19 +0100 diagnostics (0.2.5-1) unstable; urgency=low * New upstream release (merged symbol files) * Proper cleanup of config.guess * Added Homepage: field * Added watch file -- Michael Tautschnig Mon, 06 Oct 2008 21:24:36 +0200 diagnostics (0.2.4-2) unstable; urgency=low * Updated symbols control files to fix FTBFS on alpha -- Michael Tautschnig Wed, 23 Jul 2008 09:48:47 +0200 diagnostics (0.2.4-1) unstable; urgency=low * New upstream release: Debian patches mostly merged upstream * Proper cleanup code instead of debian/rules hacks -- Michael Tautschnig Sun, 20 Jul 2008 18:08:15 +0200 diagnostics (0.2.3-2) unstable; urgency=low * Added arch-specific symbol files -- Michael Tautschnig Sun, 20 Jul 2008 09:40:34 +0200 diagnostics (0.2.3-1) unstable; urgency=low * Do make check only if nocheck is not set * Cleanup config.guess,config.sub as suggested in autotools-dev bug 482716 * Removed postinst, postrm templates (thanks, lintian) * Added symbols control file * Bumped standards version to 3.8.0 (no changes) * Acknowledge NMU (closes: #489386) * Not maintained as Debian-native anymore -- Michael Tautschnig Fri, 18 Jul 2008 22:41:35 +0200 diagnostics (0.2.2+nmu1) unstable; urgency=low * Non-maintainer upload, as requested by Michael. * Work-around a g++ 4.3 bug on s390 causing the package to FTBFS on this arch (closes: #489386) -- Thomas Girard Sat, 05 Jul 2008 13:51:35 +0200 diagnostics (0.2.2) unstable; urgency=low * stream_test_system.cpp: #include cstring to fix FTBFS with gcc 4.3 (closes: #461952) -- Michael Tautschnig Wed, 23 Jan 2008 23:04:30 +0100 diagnostics (0.2.1) unstable; urgency=low * Shortened changelog line 4 in 0.2 (thanks, lintian) * diff_generator.cpp: Check for possible overflows -- Michael Tautschnig Sun, 23 Dec 2007 17:23:59 +0100 diagnostics (0.2) unstable; urgency=low * libdiagnostics-dev Recommends: libace-dev * Updated maintainer address * Bumped standards version (no changes required) * load_symbol.cpp: #include cstdlib to fix FTBFS with gcc 4.3 (closes: #455649) * Added Vcs-Brower link * Merged back changes/improvements to lib_annotations.hpp done in several projects that use diagnostics * stream_test_data_adaptor.cpp: Added info on what the letters mean to all situations (closes: #455559) * diff_generator.cpp, diff.t.cpp: Rewrote the LCSS code to fix the broken diffs (closes: #455560) * stream_test_system.cpp: Test for a sufficient number of arguments before calling strcmp, added -h and help message (closes: #455558) -- Michael Tautschnig Sun, 16 Dec 2007 21:04:41 +0100 diagnostics (0.1) unstable; urgency=low * Initial release (Closes: #413759) -- Michael Tautschnig Wed, 28 Feb 2007 23:57:01 +0100 diagnostics-0.3.3/debian/compat0000644000076500000240000000000211532671654013375 000000000000005 diagnostics-0.3.3/debian/control0000644000076500000240000000371611567507223013607 00000000000000Source: diagnostics Priority: extra Maintainer: Michael Tautschnig Build-Depends: dpkg-dev (>= 1.15.8), debhelper (>= 5), automake1.9, pkg-config, libtool, libltdl-dev, libace-dev (>= 5.7.7-3) Standards-Version: 3.9.2 Section: libs Vcs-Browser: http://code.forsyte.de/diagnostics/browser/trunk Homepage: http://code.forsyte.de/diagnostics Package: libdiagnostics-dev Section: libdevel Architecture: any Depends: libdiagnostics0 (= ${binary:Version}), ${misc:Depends} Recommends: libace-dev Description: Logging, unittesting, and runtime diagnostics for C++ - development files Diagnostics is a unified framework for code annotation, logging, program monitoring, and unit-testing. . The annotations of diagnostics provide simple trace messages, tracing method entry and exit, checks (which potentially fail), asserts (which should never fail), invariance checking on method entry and exit, and a number of annotations for testing. . The annotations raise events which are can be observed and monitored. Using different loggers, the stream of logging events is used for logging or testing. . The package contains the needed headers and libraries for developing software using Diagnostics. Package: libdiagnostics0 Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: Logging, unittesting, and runtime diagnostics for C++ - library Diagnostics is a unified framework for code annotation, logging, program monitoring, and unit-testing. . The annotations of diagnostics provide simple trace messages, tracing method entry and exit, checks (which potentially fail), asserts (which should never fail), invariance checking on method entry and exit, and a number of annotations for testing. . The annotations raise events which are can be observed and monitored. Using different loggers, the stream of logging events is used for logging or testing. . The package contains the libraries for running software linked against Diagnostics. diagnostics-0.3.3/debian/copyright0000644000076500000240000000476611532671654014147 00000000000000This is the Debian GNU/Linux package diagnostics -- unified framework for code annotation, logging, program monitoring, and unit-testing. Copyright (C) 2009,2010 Christian Schallhart , Michael Tautschnig 2008 model.in.tum.de group, FORSYTE group 2006-2007 model.in.tum.de group 2002-2005 Christian Schallhart License: This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Code in diagnostics/extensions/stacktrace has been contributed is Copyright (C) 2009, 2010 Florian Weimer Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. On Debian GNU/Linux systems, the complete text of the GNU General Public License can be found in `/usr/share/common-licenses/GPL-2' and `/usr/share/common-licenses/LGPL-2.1'. diagnostics-0.3.3/debian/diagnostics.pc0000644000076500000240000000031411532671654015030 00000000000000prefix=/usr exec_prefix=/usr libdir=/usr/lib includedir=/usr/include/diagnostics Name: diagnostics Version: 0.1 Description: Diagnostics library. Libs: -L${libdir} -ldiagnostics Cflags: -I${includedir} diagnostics-0.3.3/debian/dirs0000644000076500000240000000001111532671654013053 00000000000000usr/lib/ diagnostics-0.3.3/debian/docs0000644000076500000240000000000011532671654013040 00000000000000diagnostics-0.3.3/debian/libdiagnostics-dev.dirs0000644000076500000240000000002411532671655016631 00000000000000usr/lib usr/include diagnostics-0.3.3/debian/libdiagnostics-dev.install0000644000076500000240000000011611532671655017340 00000000000000usr/include/* usr/lib/lib*.a usr/lib/lib*.so usr/lib/pkgconfig/* usr/lib/*.la diagnostics-0.3.3/debian/libdiagnostics0.dirs0000644000076500000240000000001011532671655016130 00000000000000usr/lib diagnostics-0.3.3/debian/libdiagnostics0.install0000644000076500000240000000002211532671655016640 00000000000000usr/lib/lib*.so.* diagnostics-0.3.3/debian/libdiagnostics0.symbols0000644000076500000240000007020211567504734016672 00000000000000libdiagnostics.so.0 libdiagnostics0 #MINVER# (arch=!armel)#include "libdiagnostics0.symbols.stacktrace" (optional)#include "libdiagnostics0.symbols.optional" (c++)"diagnostics::diagnostics_library_version(bool)@Base" 0.1 (c++)"diagnostics::Exception::~Exception()@Base" 0.1 (c++)"diagnostics::File_Logger::close()@Base" 0.1 (c++)"diagnostics::File_Logger::~File_Logger()@Base" 0.1 (c++)"diagnostics::File_Logger::File_Logger(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::File_Logger::File_Logger(std::basic_string, std::allocator > const&, std::_Ios_Openmode)@Base" 0.1 (c++)"diagnostics::Intending_File_Logger::close()@Base" 0.1 (c++)"diagnostics::Intending_File_Logger::~Intending_File_Logger()@Base" 0.1 (c++)"diagnostics::Intending_File_Logger::Intending_File_Logger(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::Intending_File_Logger::Intending_File_Logger(std::basic_string, std::allocator > const&, std::_Ios_Openmode)@Base" 0.1 (c++)"diagnostics::Intending_Stream_Logger::close()@Base" 0.1 (c++)"diagnostics::Intending_Stream_Logger::~Intending_Stream_Logger()@Base" 0.1 (c++)"diagnostics::Intending_Stream_Logger::Intending_Stream_Logger(std::basic_ostream >&)@Base" 0.1 (c++)"diagnostics::Intending_Stream_Logger::log(diagnostics::Record const&)@Base" 0.1 (c++)"diagnostics::Invalid_Argument::~Invalid_Argument()@Base" 0.2.6 (c++)"diagnostics::Invalid_Argument::Invalid_Argument(diagnostics::Invalid_Argument const&)@Base" 0.2.6 (c++)"diagnostics::Invalid_Argument::Invalid_Argument(std::basic_string, std::allocator > const&)@Base" 0.2.6 (c++)"diagnostics::Invalid_Argument::name() const@Base" 0.2.6 (c++)"diagnostics::Invalid_Protocol::~Invalid_Protocol()@Base" 0.2.6 (c++)"diagnostics::Invalid_Protocol::Invalid_Protocol(diagnostics::Invalid_Protocol const&)@Base" 0.2.6 (c++)"diagnostics::Invalid_Protocol::Invalid_Protocol(std::basic_string, std::allocator > const&)@Base" 0.2.6 (c++)"diagnostics::Invalid_Protocol::name() const@Base" 0.2.6 (c++)"diagnostics::Logger::~Logger()@Base" 0.1 (c++)"diagnostics::Logging_Config_Exception::~Logging_Config_Exception()@Base" 0.1 (c++)"diagnostics::Logging_Config_Exception::Logging_Config_Exception(diagnostics::Logging_Config_Exception const&)@Base" 0.1 (c++)"diagnostics::Logging_Config_Exception::Logging_Config_Exception(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::Logging_Config_Exception::name() const@Base" 0.1 (c++)"diagnostics::Logging_Config::init()@Base" 0.1 (c++)"diagnostics::Logging_Config::register_logger(diagnostics::Logger*)@Base" 0.1 (c++)"diagnostics::Logging_Config::unregister_logger(diagnostics::Logger*)@Base" 0.1 (c++)"diagnostics::Logging_Facility::log(diagnostics::Level_t, diagnostics::Type_t, int, std::basic_string, std::allocator > const&, char const*, char const*, int)@Base" 0.1 (c++)"diagnostics::Logging_Facility::panic_log(std::basic_string, std::allocator > const&, char const*, char const*, int)@Base" 0.1 (c++)"diagnostics::Low_Level_Exception::~Low_Level_Exception()@Base" 0.2.6 (c++)"diagnostics::Low_Level_Exception::Low_Level_Exception(diagnostics::Low_Level_Exception const&)@Base" 0.2.6 (c++)"diagnostics::Low_Level_Exception::Low_Level_Exception(std::basic_string, std::allocator > const&)@Base" 0.2.6 (c++)"diagnostics::memory::Allocation_Database::analysis_off(bool)@Base" 0.1 (c++)"diagnostics::memory::Allocation_Database::analysis_on(bool)@Base" 0.1 (c++|regex)"^diagnostics::memory::Allocation_Database::balance\(unsigned (long|int)&, unsigned (long|int)&\)@Base$" 0.1 (c++|regex)"^diagnostics::memory::Allocation_Database::balance\(unsigned (long|int), unsigned (long|int)&, unsigned (long|int)&\)@Base$" 0.1 (c++)"diagnostics::memory::Allocation_Database::creation_tick()@Base" 0.1 (c++)"diagnostics::memory::Allocation_Database::register_deallocation(void*)@Base" 0.1 (c++)"diagnostics::memory::Allocation_Database::reset()@Base" 0.1 (c++|regex)"^diagnostics::memory::Allocation_Database::unallocated_blocks\(unsigned (long|int), unsigned (long|int)\*, unsigned (long|int)\*\)@Base$" 0.1 (c++)"diagnostics::Not_Implemented::name() const@Base" 0.2.6 (c++)"diagnostics::Not_Implemented::~Not_Implemented()@Base" 0.2.6 (c++)"diagnostics::Not_Implemented::Not_Implemented(diagnostics::Not_Implemented const&)@Base" 0.2.6 (c++)"diagnostics::Not_Implemented::Not_Implemented(std::basic_string, std::allocator > const&)@Base" 0.2.6 (c++)"diagnostics::Parse_Error::name() const@Base" 0.2.6 (c++)"diagnostics::Parse_Error::~Parse_Error()@Base" 0.2.6 (c++)"diagnostics::Parse_Error::Parse_Error(diagnostics::Parse_Error const&)@Base" 0.2.6 (c++)"diagnostics::Parse_Error::Parse_Error(std::basic_string, std::allocator > const&)@Base" 0.2.6 (c++)"diagnostics::Record::operator=(diagnostics::Record const&)@Base" 0.1 (c++)"diagnostics::Record::operator==(diagnostics::Record const&) const@Base" 0.1 (c++)"diagnostics::Record::~Record()@Base" 0.1 (c++)"diagnostics::Record::Record(diagnostics::Level_t, diagnostics::Type_t, int, std::basic_string, std::allocator > const&, char const*, char const*, int, int, unsigned long, long, long, char const*)@Base" 0.1 (c++)"diagnostics::Record::Record(diagnostics::Record const&)@Base" 0.1 (c++)"diagnostics::Std_Exception::~Std_Exception()@Base" 0.1 (c++)"diagnostics::Std_Exception::Std_Exception()@Base" 0.1 (c++)"diagnostics::Std_Exception::Std_Exception(diagnostics::Std_Exception const&)@Base" 0.1 (c++)"diagnostics::Std_Exception::Std_Exception(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::Std_Exception::what() const@Base" 0.1 (c++)"diagnostics::Stream_Logger::close()@Base" 0.1 (c++)"diagnostics::Stream_Logger::log(diagnostics::Record const&)@Base" 0.1 (c++)"diagnostics::Stream_Logger::~Stream_Logger()@Base" 0.1 (c++)"diagnostics::Stream_Logger::Stream_Logger(std::basic_ostream >&)@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::exists_entry(std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::file_name() const@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::~File_Test_Data_Source()@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::File_Test_Data_Source()@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::get_entry(std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::init(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::is_initialized() const@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::is_modified() const@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::load(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::save(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::save(std::basic_string, std::allocator > const&, bool)@Base" 0.1 (c++)"diagnostics::unittest::File_Test_Data_Source::set_entry(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::Filter_Test_Data::attach(std::basic_string, std::allocator > const&, diagnostics::unittest::Test_Data*)@Base" 0.1 (c++)"diagnostics::unittest::Filter_Test_Data::compare(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::Filter_Test_Data::~Filter_Test_Data()@Base" 0.1 (c++)"diagnostics::unittest::Filter_Test_Data::Filter_Test_Data()@Base" 0.1 (c++)"diagnostics::unittest::Filter_Test_Data::get(std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::Interactive_Test_Data_Adaptor::attach(diagnostics::unittest::Test_Data_Source*)@Base" 0.1 (c++)"diagnostics::unittest::Interactive_Test_Data_Adaptor::backend() const@Base" 0.1 (c++)"diagnostics::unittest::Interactive_Test_Data_Adaptor::compare(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::Interactive_Test_Data_Adaptor::get(std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::Interactive_Test_Data_Adaptor::~Interactive_Test_Data_Adaptor()@Base" 0.1 (c++)"diagnostics::unittest::Interactive_Test_Data_Adaptor::Interactive_Test_Data_Adaptor()@Base" 0.1 (c++)"diagnostics::unittest::List_Test_Suite_Traversal::~List_Test_Suite_Traversal()@Base" 0.1 (c++)"diagnostics::unittest::List_Test_Suite_Traversal::List_Test_Suite_Traversal(std::vector >&)@Base" 0.1 (c++)"diagnostics::unittest::List_Test_Suite_Traversal::visit_hook(diagnostics::unittest::Test_Case const&, std::vector, std::allocator >, std::allocator, std::allocator > > > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::mask_adheres_convention(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::Mutexed_Test_Data::attach(diagnostics::unittest::Test_Data*)@Base" 0.1 (c++)"diagnostics::unittest::Mutexed_Test_Data::compare(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::Mutexed_Test_Data::get(std::basic_string, std::allocator > const&) const@Base" 0.1 (c++)"diagnostics::unittest::Mutexed_Test_Data::~Mutexed_Test_Data()@Base" 0.1 (c++)"diagnostics::unittest::Mutexed_Test_Data::Mutexed_Test_Data()@Base" 0.1 (c++)"diagnostics::unittest::name_adheres_convention(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::path_adheres_convention(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::Run_Test_Suite_Traversal::~Run_Test_Suite_Traversal()@Base" 0.1 (c++)"diagnostics::unittest::Run_Test_Suite_Traversal::Run_Test_Suite_Traversal(diagnostics::Level_t, diagnostics::unittest::Test_Data&, std::vector >&)@Base" 0.1 (c++)"diagnostics::unittest::Run_Test_Suite_Traversal::visit_hook(diagnostics::unittest::Test_Case const&, std::vector, std::allocator >, std::allocator, std::allocator > > > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Std_Test_Case::is_rerunable() const@Base" 0.1 (c++)"diagnostics::unittest::Std_Test_Case::is_testable_at(diagnostics::Level_t) const@Base" 0.1 (c++)"diagnostics::unittest::Std_Test_Case::name() const@Base" 0.1 (c++)"diagnostics::unittest::Std_Test_Case::~Std_Test_Case()@Base" 0.1 (c++)"diagnostics::unittest::Std_Test_Case::Std_Test_Case(std::basic_string, std::allocator > const&, int, bool, bool, bool, bool)@Base" 0.1 (c++)"diagnostics::unittest::Std_Test_Case::timeout() const@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_Data_Adaptor::mode() const@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_Data_Adaptor::mode(diagnostics::unittest::Stream_Test_Data_Adaptor::Mode_t)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_Data_Adaptor::p_mismatching_test_data(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&, std::basic_string, std::allocator >&) const@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_Data_Adaptor::p_missing_test_data(std::basic_string, std::allocator > const&, std::basic_string, std::allocator >&) const@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_Data_Adaptor::~Stream_Test_Data_Adaptor()@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_Data_Adaptor::Stream_Test_Data_Adaptor(std::basic_istream >&, std::basic_ostream >&)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System::add(diagnostics::unittest::Test_Case*)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System::add(diagnostics::unittest::Test_Suite*)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::add(diagnostics::unittest::Test_Case*)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::add(diagnostics::unittest::Test_Suite*)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::interactive_run()@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::p_fraction_to_string(int, int)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::p_list(std::basic_string, std::allocator > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::p_run(std::basic_string, std::allocator > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::run()@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::~Stream_Test_System_Implementation()@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Implementation::Stream_Test_System_Implementation(diagnostics::Level_t, int, char const* const*, std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&, std::basic_istream >&, std::basic_ostream >&)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Main::main(int, char const* const*, int, diagnostics::unittest::Test_Suite* (*)())@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System_Main::set_initial_loggers(std::vector >&)@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System::run()@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System::~Stream_Test_System()@Base" 0.1 (c++)"diagnostics::unittest::Stream_Test_System::Stream_Test_System(diagnostics::Level_t, int, char const* const*, std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&, std::basic_istream >&, std::basic_ostream >&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Case::~Test_Case()@Base" 0.1 (c++)"diagnostics::unittest::Test_Data_Adaptor::~Test_Data_Adaptor()@Base" 0.1 (c++)"diagnostics::unittest::Test_Data_Source::~Test_Data_Source()@Base" 0.1 (c++)"diagnostics::unittest::Test_Data::~Test_Data()@Base" 0.1 (c++)"diagnostics::unittest::Test_Exception::name() const@Base" 0.1 (c++)"diagnostics::unittest::Test_Exception::~Test_Exception()@Base" 0.1 (c++)"diagnostics::unittest::Test_List_Result::is_testable_at(diagnostics::Level_t) const@Base" 0.1 (c++)"diagnostics::unittest::Test_List_Result::operator=(diagnostics::unittest::Test_List_Result const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_List_Result::operator==(diagnostics::unittest::Test_List_Result const&) const@Base" 0.1 (c++)"diagnostics::unittest::Test_List_Result::Test_List_Result(diagnostics::unittest::Test_List_Result const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_List_Result::Test_List_Result(std::basic_string, std::allocator > const&, int, bool, bool, bool, bool)@Base" 0.1 (c++)"diagnostics::unittest::Test_Logger::abstract_state() const@Base" 0.1 (c++)"diagnostics::unittest::Test_Logger::close()@Base" 0.1 (c++)"diagnostics::unittest::Test_Logger::log(diagnostics::Record const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Logger::~Test_Logger()@Base" 0.1 (c++)"diagnostics::unittest::Test_Logger::Test_Logger(diagnostics::Level_t, diagnostics::Level_t, std::vector >&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Run_Result::add_record(diagnostics::Record const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Run_Result::operator=(diagnostics::unittest::Test_Run_Result const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Run_Result::operator==(diagnostics::unittest::Test_Run_Result const&) const@Base" 0.1 (c++)"diagnostics::unittest::Test_Run_Result::Test_Run_Result(diagnostics::Level_t, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_Run_Result::Test_Run_Result(diagnostics::Level_t, diagnostics::Level_t, std::vector > const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Run_Result::Test_Run_Result(diagnostics::unittest::Test_Run_Result const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite::add(diagnostics::unittest::Test_Case*)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite::add(diagnostics::unittest::Test_Suite*)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite::~Test_Suite()@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite::Test_Suite(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::enter_hook(diagnostics::unittest::Test_Suite const&, std::basic_string, std::allocator > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::exit_hook(diagnostics::unittest::Test_Suite const&, std::basic_string, std::allocator > const&, diagnostics::Level_t, bool)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::leave_hook(diagnostics::unittest::Test_Suite const&, std::vector, std::allocator >, std::allocator, std::allocator > > > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::p_traverse(diagnostics::unittest::Test_Case const&, std::basic_string, std::allocator > const&, std::vector, std::allocator >, std::allocator, std::allocator > > > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::p_traverse(diagnostics::unittest::Test_Suite const&, std::basic_string, std::allocator >, std::vector, std::allocator >, std::allocator, std::allocator > > >&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::~Test_Suite_Traversal()@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::Test_Suite_Traversal()@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::traverse(diagnostics::unittest::Test_Suite const&, std::basic_string, std::allocator > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::visit_hook(diagnostics::unittest::Test_Case const&, std::vector, std::allocator >, std::allocator, std::allocator > > > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_Suite_Traversal::visit_hook(diagnostics::unittest::Test_Suite const&, std::vector, std::allocator >, std::allocator, std::allocator > > > const&, diagnostics::Level_t)@Base" 0.1 (c++)"diagnostics::unittest::Test_System_Exception::name() const@Base" 0.1 (c++)"diagnostics::unittest::Test_System_Exception::~Test_System_Exception()@Base" 0.1 (c++)"diagnostics::unittest::Test_System::~Test_System()@Base" 0.1 (c++)"diagnostics::Violated_Invariance::name() const@Base" 0.2.6 (c++)"diagnostics::Violated_Invariance::~Violated_Invariance()@Base" 0.2.6 (c++)"diagnostics::Violated_Invariance::Violated_Invariance(diagnostics::Violated_Invariance const&)@Base" 0.2.6 (c++)"diagnostics::Violated_Invariance::Violated_Invariance(std::basic_string, std::allocator > const&)@Base" 0.2.6 (c++)"operator<<(std::basic_ostream >&, diagnostics::Record const&)@Base" 0.1 (c++)"operator<<(std::basic_ostream >&, diagnostics::unittest::Test_List_Result const&)@Base" 0.1 (c++)"operator<<(std::basic_ostream >&, diagnostics::unittest::Test_Run_Result const&)@Base" 0.1 (c++)"typeinfo for diagnostics::Exception@Base" 0.1 (c++)"typeinfo for diagnostics::File_Logger@Base" 0.1 (c++)"typeinfo for diagnostics::Intending_File_Logger@Base" 0.1 (c++)"typeinfo for diagnostics::Intending_Stream_Logger@Base" 0.1 (c++)"typeinfo for diagnostics::Invalid_Argument@Base" 0.2.6 (c++)"typeinfo for diagnostics::Invalid_Protocol@Base" 0.2.6 (c++)"typeinfo for diagnostics::Logger@Base" 0.1 (c++)"typeinfo for diagnostics::Logging_Config_Exception@Base" 0.1 (c++)"typeinfo for diagnostics::Low_Level_Exception@Base" 0.2.6 (c++)"typeinfo for diagnostics::Not_Implemented@Base" 0.2.6 (c++)"typeinfo for diagnostics::Parse_Error@Base" 0.2.6 (c++)"typeinfo for diagnostics::Std_Exception@Base" 0.1 (c++)"typeinfo for diagnostics::Stream_Logger@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::File_Test_Data_Source@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Filter_Test_Data@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Interactive_Test_Data_Adaptor@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::List_Test_Suite_Traversal@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Mutexed_Test_Data@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Run_Test_Suite_Traversal@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Std_Test_Case@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Stream_Test_Data_Adaptor@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Stream_Test_System@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_Case@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_Data_Adaptor@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_Data@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_Data_Source@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_Exception@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_Logger@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_Suite_Traversal@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_System@Base" 0.1 (c++)"typeinfo for diagnostics::unittest::Test_System_Exception@Base" 0.1 (c++)"typeinfo for diagnostics::Violated_Invariance@Base" 0.2.6 (c++)"typeinfo name for diagnostics::Exception@Base" 0.1 (c++)"typeinfo name for diagnostics::File_Logger@Base" 0.1 (c++)"typeinfo name for diagnostics::Intending_File_Logger@Base" 0.1 (c++)"typeinfo name for diagnostics::Intending_Stream_Logger@Base" 0.1 (c++)"typeinfo name for diagnostics::Invalid_Argument@Base" 0.2.6 (c++)"typeinfo name for diagnostics::Invalid_Protocol@Base" 0.2.6 (c++)"typeinfo name for diagnostics::Logger@Base" 0.1 (c++)"typeinfo name for diagnostics::Logging_Config_Exception@Base" 0.1 (c++)"typeinfo name for diagnostics::Low_Level_Exception@Base" 0.2.6 (c++)"typeinfo name for diagnostics::Not_Implemented@Base" 0.2.6 (c++)"typeinfo name for diagnostics::Parse_Error@Base" 0.2.6 (c++)"typeinfo name for diagnostics::Std_Exception@Base" 0.1 (c++)"typeinfo name for diagnostics::Stream_Logger@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::File_Test_Data_Source@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Filter_Test_Data@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Interactive_Test_Data_Adaptor@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::List_Test_Suite_Traversal@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Mutexed_Test_Data@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Run_Test_Suite_Traversal@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Std_Test_Case@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Stream_Test_Data_Adaptor@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Stream_Test_System@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_Case@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_Data_Adaptor@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_Data@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_Data_Source@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_Exception@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_Logger@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_Suite_Traversal@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_System@Base" 0.1 (c++)"typeinfo name for diagnostics::unittest::Test_System_Exception@Base" 0.1 (c++)"typeinfo name for diagnostics::Violated_Invariance@Base" 0.2.6 (c++)"vtable for diagnostics::Exception@Base" 0.1 (c++)"vtable for diagnostics::File_Logger@Base" 0.1 (c++)"vtable for diagnostics::Intending_File_Logger@Base" 0.1 (c++)"vtable for diagnostics::Intending_Stream_Logger@Base" 0.1 (c++)"vtable for diagnostics::Invalid_Argument@Base" 0.2.6 (c++)"vtable for diagnostics::Invalid_Protocol@Base" 0.2.6 (c++)"vtable for diagnostics::Logger@Base" 0.1 (c++)"vtable for diagnostics::Logging_Config_Exception@Base" 0.1 (c++)"vtable for diagnostics::Low_Level_Exception@Base" 0.2.6 (c++)"vtable for diagnostics::Not_Implemented@Base" 0.2.6 (c++)"vtable for diagnostics::Parse_Error@Base" 0.2.6 (c++)"vtable for diagnostics::Std_Exception@Base" 0.1 (c++)"vtable for diagnostics::Stream_Logger@Base" 0.1 (c++)"vtable for diagnostics::unittest::File_Test_Data_Source@Base" 0.1 (c++)"vtable for diagnostics::unittest::Filter_Test_Data@Base" 0.1 (c++)"vtable for diagnostics::unittest::Interactive_Test_Data_Adaptor@Base" 0.1 (c++)"vtable for diagnostics::unittest::List_Test_Suite_Traversal@Base" 0.1 (c++)"vtable for diagnostics::unittest::Mutexed_Test_Data@Base" 0.1 (c++)"vtable for diagnostics::unittest::Run_Test_Suite_Traversal@Base" 0.1 (c++)"vtable for diagnostics::unittest::Std_Test_Case@Base" 0.1 (c++)"vtable for diagnostics::unittest::Stream_Test_Data_Adaptor@Base" 0.1 (c++)"vtable for diagnostics::unittest::Stream_Test_System@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_Case@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_Data_Adaptor@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_Data@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_Data_Source@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_Exception@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_Logger@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_Suite_Traversal@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_System@Base" 0.1 (c++)"vtable for diagnostics::unittest::Test_System_Exception@Base" 0.1 (c++)"vtable for diagnostics::Violated_Invariance@Base" 0.2.6 diagnostics-0.3.3/debian/libdiagnostics0.symbols.optional0000644000076500000240000007736311567504734020535 00000000000000 (c++)"char* std::basic_string, std::allocator >::_S_construct(char*, char*, std::allocator const&, std::forward_iterator_tag)@Base" 0.3 (c++)"char* std::basic_string, std::allocator >::_S_construct<__gnu_cxx::__normal_iterator, std::allocator > > >(__gnu_cxx::__normal_iterator, std::allocator > >, __gnu_cxx::__normal_iterator, std::allocator > >, std::allocator const&, std::forward_iterator_tag)@Base" 0.3 (c++)"diagnostics::internal::Block_Guard<(diagnostics::Type_t)0, (diagnostics::Type_t)1, (diagnostics::Level_t)4, 0, 43>::~Block_Guard()@Base" 0.2 (c++)"diagnostics::internal::Diff_Exception::~Diff_Exception()@Base" 0.2.1 (c++)"diagnostics::internal::Diff_Exception::name() const@Base" 0.2.1 (c++)"diagnostics::internal::Diff_Generator::~Diff_Generator()@Base" 0.1 (c++)"diagnostics::internal::Diff_Generator::Diff_Generator()@Base" 0.1 (c++)"diagnostics::internal::Diff_Generator::diff_text(std::basic_string, std::allocator >&, bool)@Base" 0.2 (c++)"diagnostics::internal::Diff_Generator::p_append_composed_line(std::basic_string, std::allocator >&, char, std::basic_string, std::allocator > const&, bool)@Base" 0.1 (c++)"diagnostics::internal::Diff_Generator::p_do_diff()@Base" 0.2 (c++)"diagnostics::internal::Diff_Generator::p_split_hash(std::vector, std::allocator >, std::allocator, std::allocator > > >&, std::vector >&, std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::internal::Diff_Generator::texta(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::internal::Diff_Generator::textb(std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::internal::diff_text(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&, bool)@Base" 0.1 (c++)"diagnostics::internal::diff_text(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&, std::basic_string, std::allocator >&, bool)@Base" 0.1 (c++)"diagnostics::internal::load_symbol(char const*, char const*)@Base" 0.1 (c++)"diagnostics::internal::Lock_Guard::~Lock_Guard()@Base" 0.2 (c++)"diagnostics::internal::Lock_Guard::m_mutex@Base" 0.1 (c++)"diagnostics::internal::Lock_Guard::m_nesting_count@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::atexit_handler()@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::~Logging_Implementation()@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::Logging_Implementation()@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::m_instance@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::panic_log(std::basic_string, std::allocator > const&, char const*, char const*, int)@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::register_logger(diagnostics::Logger*)@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::setup_instance()@Base" 0.1 (c++)"diagnostics::internal::Logging_Implementation::unregister_logger(diagnostics::Logger*)@Base" 0.1 (c++)"diagnostics::internal::read(std::basic_istream >&, std::basic_string, std::allocator >&)@Base" 0.1 (c++)"diagnostics::internal::read(std::basic_istream >&, std::map, std::allocator >, std::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >&)@Base" 0.1 (c++)"diagnostics::internal::read(std::basic_istream >&, unsigned long&)@Base" 0.1 (c++)"diagnostics::internal::write(std::basic_ostream >&, std::basic_string, std::allocator > const&)@Base" 0.1 (c++)"diagnostics::internal::write(std::basic_ostream >&, std::map, std::allocator >, std::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > > const&)@Base" 0.1 (c++)"diagnostics::internal::write(std::basic_ostream >&, unsigned long)@Base" 0.1 (c++)"diagnostics::Logger** std::__copy_move_a(diagnostics::Logger**, diagnostics::Logger**, diagnostics::Logger**)@Base" 0.3 (c++)"diagnostics::memory::Allocation_Database_Implementation::instance()@Base" 0.1 (c++)"diagnostics::memory::Allocation_Database_Implementation::m_check_nesting@Base" 0.1 (c++)"diagnostics::memory::Allocation_Database_Implementation::m_instance@Base" 0.1 (c++)"diagnostics::memory::Allocation_Database_Implementation::register_deallocation(void*)@Base" 0.1 (c++)"diagnostics::memory::Allocation_Database_Implementation::reset()@Base" 0.1 (c++)"diagnostics::memory::internal::Allocation_Balance_Guard::~Allocation_Balance_Guard()@Base" 0.1 (c++)"diagnostics::memory::internal::Allocation_Balance_Guard::Allocation_Balance_Guard(char const*, char const*, diagnostics::Level_t, int, bool, bool, diagnostics::Type_t)@Base" 0.1 (c++)"diagnostics::memory::internal::Allocation_Balance_Guard::assert_balance(int, diagnostics::Type_t)@Base" 0.1 (c++)"diagnostics::memory::internal::Allocation_Balance_Guard::log_balance(int)@Base" 0.1 (c++)"diagnostics::memory::internal::Allocation_Balance_Guard::log_total_balance(int)@Base" 0.1 (c++)"diagnostics::unittest::internal::Current_Test_Logger_Implementation::Current_Test_Logger_Implementation()@Base" 0.3.2 (c++)"diagnostics::unittest::internal::Current_Test_Logger_Implementation::m_instance@Base" 0.1 (c++)"diagnostics::unittest::internal::Current_Test_Logger_Implementation::stack()@Base" 0.1 (c++)"diagnostics::unittest::internal::Current_Test_Logger::pop_logger()@Base" 0.1 (c++)"diagnostics::unittest::internal::Current_Test_Logger::push_logger(diagnostics::Logger*)@Base" 0.1 (c++)"diagnostics::unittest::internal::Current_Test_Logger::register_logger()@Base" 0.1 (c++)"diagnostics::unittest::internal::Current_Test_Logger::unregister_logger()@Base" 0.1 (c++)"__gnu_cxx::__enable_if::__value, bool>::__type std::operator==(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"__gnu_cxx::__normal_iterator, std::allocator > > std::__find<__gnu_cxx::__normal_iterator, std::allocator > >, char>(__gnu_cxx::__normal_iterator, std::allocator > >, __gnu_cxx::__normal_iterator, std::allocator > >, char const&, std::random_access_iterator_tag)@Base" 0.3.2 (c++)"int diagnostics::internal::from_string(std::basic_string, std::allocator > const&)@Base" 0.1 (c++|regex)"^diagnostics::memory::Allocation_Database_Implementation::register_allocation\(void\*, unsigned (long|int)\)@Base$" 0.1 (c++|regex)"^diagnostics::memory::Allocation_Database::register_allocation\(void\*, unsigned (long|int)\)@Base$" 0.1 (c++|regex)"^std::basic_string, std::allocator > diagnostics::internal::to_string\(unsigned (long|int) const&\)@Base$" 0.1 (c++|regex)"^std::_Deque_base, std::allocator > >::_M_initialize_map\(unsigned (long|int)\)@Base$" 0.3 (c++|regex)"^std::deque, std::allocator > >::_M_reallocate_map\(unsigned (long|int), bool\)@Base$" 0.3.2 (c++|regex)"^std::vector >::_M_fill_insert\(__gnu_cxx::__normal_iterator > >, unsigned (long|int), diagnostics::Logger\* const&\)@Base$" 0.3 (c++|regex)"^unsigned (long|int)\* std::__unguarded_partition\(unsigned (long|int)\*, unsigned (long|int)\*, unsigned (long|int) const&\)@Base$" 0.3.2 (c++|regex)"^void std::__adjust_heap\(unsigned (long|int)\*, (long|int), (long|int), unsigned (long|int)\)@Base$" 0.3 (c++|regex)"^void std::__final_insertion_sort\(unsigned (long|int)\*, unsigned (long|int)\*\)@Base$" 0.3.2 (c++|regex)"^void std::__heap_select\(unsigned (long|int)\*, unsigned (long|int)\*, unsigned (long|int)\*\)@Base$" 0.3.2 (c++|regex)"^void std::__insertion_sort\(unsigned (long|int)\*, unsigned (long|int)\*\)@Base$" 0.3 (c++|regex)"^void std::__introsort_loop\(unsigned (long|int)\*, unsigned (long|int)\*, (long|int)\)@Base$" 0.3 (c++|regex)"^void std::make_heap\(unsigned (long|int)\*, unsigned (long|int)\*\)@Base$" 0.3.2 (c++|regex)"^void std::__push_heap\(unsigned (long|int)\*, (long|int), (long|int), unsigned (long|int)\)@Base$" 0.3.2 (c++|regex)"^void std::sort_heap\(unsigned (long|int)\*, unsigned (long|int)\*\)@Base$" 0.3.2 (c++)"std::basic_stringbuf, std::allocator >::~basic_stringbuf()@Base" 0.3 (c++)"std::basic_string, std::allocator > diagnostics::internal::to_string(char const (&) [16], char const* const&, char const (&) [12], char const* const&, char const (&) [2])@Base" 0.3.2 (c++)"std::basic_string, std::allocator > diagnostics::internal::to_string(char const (&) [16], char const* const&, char const (&) [9], char const* const&, char const (&) [2])@Base" 0.3.2 (c++)"std::basic_string, std::allocator > diagnostics::internal::to_string(char const (&) [17], char const* const&, char const (&) [12], char const* const&, char const (&) [2])@Base" 0.3.2 (c++)"std::basic_string, std::allocator > diagnostics::internal::to_string(char const (&) [31])@Base" 0.3.2 (c++)"std::basic_string, std::allocator > diagnostics::internal::to_string(diagnostics::Record const&)@Base" 0.1 (c++)"std::basic_string, std::allocator > diagnostics::internal::to_string(int const&)@Base" 0.1 (c++)"std::basic_string, std::allocator > diagnostics::internal::to_string(void* const&)@Base" 0.1 (c++)"std::basic_string, std::allocator > std::operator+, std::allocator >(char const*, std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"std::basic_string, std::allocator > std::operator+, std::allocator >(std::basic_string, std::allocator > const&, char const*)@Base" 0.3 (c++)"std::basic_string, std::allocator > std::operator+, std::allocator >(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"std::_Deque_base, std::allocator > >::~_Deque_base()@Base" 0.3 (c++)"std::deque, std::allocator > >::_M_pop_back_aux()@Base" 0.3.2 (c++)"std::deque, std::allocator > >::_M_push_back_aux(std::pair const&)@Base" 0.3.2 (c++)"std::pair, std::allocator > const, std::basic_string, std::allocator > >::~pair()@Base" 0.3.2 (c++)"std::pair, std::allocator >, std::basic_string, std::allocator > >::~pair()@Base" 0.3.2 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::find(std::basic_string, std::allocator > const&) const@Base" 0.3.2 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::_M_copy(std::_Rb_tree_node, std::allocator > const, std::basic_string, std::allocator > > > const*, std::_Rb_tree_node, std::allocator > const, std::basic_string, std::allocator > > >*)@Base" 0.3 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::_M_erase(std::_Rb_tree_node, std::allocator > const, std::basic_string, std::allocator > > >*)@Base" 0.3 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::_M_insert_(std::_Rb_tree_node_base const*, std::_Rb_tree_node_base const*, std::pair, std::allocator > const, std::basic_string, std::allocator > > const&)@Base" 0.3 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::_M_insert_unique(std::pair, std::allocator > const, std::basic_string, std::allocator > > const&)@Base" 0.3 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::_M_insert_unique_(std::_Rb_tree_const_iterator, std::allocator > const, std::basic_string, std::allocator > > >, std::pair, std::allocator > const, std::basic_string, std::allocator > > const&)@Base" 0.3 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::operator=(std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > > const&)@Base" 0.3.2 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::~_Rb_tree()@Base" 0.3.2 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::~_Rb_tree()@Base" 0.3.2 (c++)"std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >::swap(std::_Rb_tree, std::allocator >, std::pair, std::allocator > const, std::basic_string, std::allocator > >, std::_Select1st, std::allocator > const, std::basic_string, std::allocator > > >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::basic_string, std::allocator > > > >&)@Base" 0.3.2 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::find(void* const&)@Base" 0.3.2 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::_M_copy(std::_Rb_tree_node > const*, std::_Rb_tree_node >*)@Base" 0.3 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::_M_erase(std::_Rb_tree_node >*)@Base" 0.3 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::_M_insert_(std::_Rb_tree_node_base const*, std::_Rb_tree_node_base const*, std::pair const&)@Base" 0.3 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::_M_insert_unique(std::pair const&)@Base" 0.3 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::_M_insert_unique_(std::_Rb_tree_const_iterator >, std::pair const&)@Base" 0.3 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::operator=(std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > > const&)@Base" 0.3.2 (c++)"std::_Rb_tree, std::_Select1st >, std::less, diagnostics::memory::internal::Malloc_Allocator > >::~_Rb_tree()@Base" 0.3.2 (c++)"std::vector >::_M_insert_aux(__gnu_cxx::__normal_iterator > >, diagnostics::Logger* const&)@Base" 0.3 (c++)"std::vector >::~vector()@Base" 0.3.2 (c++)"std::vector >::_M_insert_aux(__gnu_cxx::__normal_iterator > >, diagnostics::Record const&)@Base" 0.3 (c++)"std::vector >::operator=(std::vector > const&)@Base" 0.3 (c++)"std::vector >::push_back(diagnostics::Record const&)@Base" 0.3 (c++)"std::vector >::~vector()@Base" 0.3 (c++)"std::vector >::_M_insert_aux(__gnu_cxx::__normal_iterator > >, diagnostics::unittest::Test_Case* const&)@Base" 0.3 (c++)"std::vector >::~vector()@Base" 0.3.2 (c++)"std::vector >::_M_insert_aux(__gnu_cxx::__normal_iterator > >, diagnostics::unittest::Test_List_Result* const&)@Base" 0.3 (c++)"std::vector >::~vector()@Base" 0.3.2 (c++)"std::vector >::_M_insert_aux(__gnu_cxx::__normal_iterator > >, diagnostics::unittest::Test_Run_Result* const&)@Base" 0.3 (c++)"std::vector >::~vector()@Base" 0.3.2 (c++)"std::vector >::_M_insert_aux(__gnu_cxx::__normal_iterator > >, diagnostics::unittest::Test_Suite* const&)@Base" 0.3 (c++)"std::vector >::~vector()@Base" 0.3.2 (c++)"std::vector >::~vector()@Base" 0.3.2 (c++)"std::vector, std::allocator >, std::allocator, std::allocator > > >::_M_insert_aux(__gnu_cxx::__normal_iterator, std::allocator >*, std::vector, std::allocator >, std::allocator, std::allocator > > > >, std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"std::vector, std::allocator >, std::allocator, std::allocator > > >::~vector()@Base" 0.3 (c++)"std::vector, std::allocator > >::_M_insert_aux(__gnu_cxx::__normal_iterator*, std::vector, std::allocator > > >, std::pair const&)@Base" 0.3 (c++)"std::vector >::_M_insert_aux(__gnu_cxx::__normal_iterator > >, unsigned long const&)@Base" 0.3 (c++)"typeinfo for diagnostics::internal::Diff_Exception@Base" 0.2.1 (c++)"typeinfo name for diagnostics::internal::Diff_Exception@Base" 0.2.1 (c++)"void std::_Destroy_aux::__destroy(diagnostics::Record*, diagnostics::Record*)@Base" 0.3.2 (c++)"void std::_Destroy_aux::__destroy, std::allocator >*>(std::basic_string, std::allocator >*, std::basic_string, std::allocator >*)@Base" 0.3.2 (c++)"vtable for diagnostics::internal::Diff_Exception@Base" 0.2.1 diagnostics-0.3.3/debian/libdiagnostics0.symbols.stacktrace0000644000076500000240000000770611567506016021021 00000000000000 (c++)"diagnostics::stacktrace::POSIX::CreateSafely(std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Cwd()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Descriptor::Close()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Descriptor::CloseNoThrow()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Descriptor::OpenReadOnly(char const*)@Base" 0.3 (c++|regex)"^diagnostics::stacktrace::POSIX::Descriptor::read\(void\*, unsigned (long|int)\)@Base$" 0.3 (c++)"diagnostics::stacktrace::POSIX::Descriptor::SetCloseOnExec(bool)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Descriptor::SetNonBlocking(bool)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Error::~Error()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Error::Error()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Error::Error(int)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Error::name() const@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::ErrorString(int)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Error::Throw()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Exists(std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::IsAbsolute(std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::IsExecutable(std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Pipe::~Pipe()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Pipe::Pipe()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::ProcessResult::~ProcessResult()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::ProcessResult::ProcessResult()@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::RealPath(std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Rename(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&)@Base" 0.3 (c++)"diagnostics::stacktrace::POSIX::Run(char const*, char* const*, char* const*, diagnostics::stacktrace::POSIX::ProcessResult&)@Base" 0.3 (c++|optional)"diagnostics::stacktrace::POSIX::SaveSigProcMask::~SaveSigProcMask()@Base" 0.3.2 (c++)"diagnostics::stacktrace::POSIX::SearchCommand(std::basic_string, std::allocator > const&, std::basic_string, std::allocator > const&)@Base" 0.3 (c++|optional)"diagnostics::stacktrace::POSIX::SpawnAttr::~SpawnAttr()@Base" 0.3.2 (c++|optional)"diagnostics::stacktrace::POSIX::SpawnFileActions::~SpawnFileActions()@Base" 0.3.2 (c++)"diagnostics::stacktrace::Traceback::FrameVisitor::~FrameVisitor()@Base" 0.3 (c++)"diagnostics::stacktrace::Traceback::FrameVisitor::frame(void*)@Base" 0.3 (c++)"diagnostics::stacktrace::Traceback::FrameVisitor::Walk()@Base" 0.3 (c++)"diagnostics::stacktrace::Traceback::InstallHandler()@Base" 0.3 (c++)"diagnostics::stacktrace::Traceback::SourceVisitor::~SourceVisitor()@Base" 0.3 (c++)"diagnostics::stacktrace::Traceback::SourceVisitor::WalkSource(char const*, void*)@Base" 0.3 (c++)"diagnostics::stacktrace::Traceback::TerminateHandler()@Base" 0.3 (c++)"typeinfo for diagnostics::stacktrace::POSIX::Error@Base" 0.3 (c++)"typeinfo for diagnostics::stacktrace::Traceback::FrameVisitor@Base" 0.3 (c++)"typeinfo for diagnostics::stacktrace::Traceback::SourceVisitor@Base" 0.3 (c++)"typeinfo name for diagnostics::stacktrace::POSIX::Error@Base" 0.3 (c++)"typeinfo name for diagnostics::stacktrace::Traceback::FrameVisitor@Base" 0.3 (c++)"typeinfo name for diagnostics::stacktrace::Traceback::SourceVisitor@Base" 0.3 (c++)"vtable for diagnostics::stacktrace::POSIX::Error@Base" 0.3 (c++)"vtable for diagnostics::stacktrace::Traceback::FrameVisitor@Base" 0.3 (c++)"vtable for diagnostics::stacktrace::Traceback::SourceVisitor@Base" 0.3 diagnostics-0.3.3/debian/rules0000744000076500000240000000657411532671677013276 00000000000000#!/usr/bin/make -f # -*- makefile -*- # Sample debian/rules that uses debhelper. # This file was originally written by Joey Hess and Craig Small. # As a special exception, when this file is copied by dh-make into a # dh-make output file, you may use that output file without restriction. # This special exception was added by Craig Small in version 0.37 of dh-make. # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 # These are used for cross-compiling and for saving the configure script # from having to guess our platform (since we know it already) DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) CXXFLAGS = -Wall -Werror -pedantic -g ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) CXXFLAGS += -O0 else CXXFLAGS += -O2 endif # shared library versions, option 1 # version=2.0.5 # major=2 # option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so #version=`ls src/.libs/lib*.so.* | \ # awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'` #major=`ls src/.libs/lib*.so.* | \ # awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'` config.status: configure dh_testdir ifneq "$(wildcard /usr/share/misc/config.sub)" "" cp -f /usr/share/misc/config.sub config.sub endif ifneq "$(wildcard /usr/share/misc/config.guess)" "" cp -f /usr/share/misc/config.guess config.guess endif # Add here commands to configure the package. ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \ --prefix=/usr --mandir=\$${prefix}/share/man \ --infodir=\$${prefix}/share/info \ --disable-update-makefiles \ --with-ltdl-include=/usr/include --with-ltdl-lib=/usr/lib \ CXXFLAGS="$(CXXFLAGS)" # LDFLAGS="-Wl,-z,defs" build: build-stamp build-stamp: config.status dh_testdir # Add here commands to compile the package. $(MAKE) # run all internal tests ifeq (,$(findstring nocheck,$(DEB_BUILD_OPTIONS))) $(MAKE) check CXXFLAGS="$(filter-out -Werror, $(CXXFLAGS))" endif touch $@ clean: dh_testdir dh_testroot rm -f build-stamp # Add here commands to clean up after the build process. [ ! -f Makefile ] || $(MAKE) distclean ifneq "$(wildcard /usr/share/misc/config.sub)" "" rm -f config.sub endif ifneq "$(wildcard /usr/share/misc/config.guess)" "" rm -f config.guess endif dh_clean install: build dh_testdir dh_testroot dh_clean -k dh_installdirs # Add here commands to install the package into debian/tmp $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install #pkg-config .pc install: install -d $(CURDIR)/debian/tmp/usr/lib/pkgconfig install -m 644 debian/*.pc $(CURDIR)/debian/tmp/usr/lib/pkgconfig # Build architecture-independent files here. binary-indep: build install # We have nothing to do by default. # Build architecture-dependent files here. binary-arch: build install dh_testdir dh_testroot dh_installchangelogs ChangeLog dh_installdocs dh_installexamples dh_install --sourcedir=debian/tmp # dh_installmenu # dh_installdebconf # dh_installlogrotate # dh_installemacsen # dh_installpam # dh_installmime # dh_installinit # dh_installcron # dh_installinfo dh_installman dh_link dh_strip dh_compress dh_fixperms # dh_perl # dh_python dh_makeshlibs dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb binary: binary-indep binary-arch .PHONY: build clean binary-indep binary-arch binary install diagnostics-0.3.3/debian/source/0000755000076500000240000000000011567507572013564 500000000000000diagnostics-0.3.3/debian/source/format0000644000076500000240000000001411532671656014707 000000000000003.0 (quilt) diagnostics-0.3.3/debian/watch0000644000076500000240000000020011532671656013222 00000000000000version=3 http://code.forsyte.de/diagnostics/wiki/Download /diagnostics/attachment/wiki/Download/diagnostics-([\d\.]*)\.tar\.gz diagnostics-0.3.3/diagnostics/0000755000076500000240000000000011567507572013351 500000000000000diagnostics-0.3.3/diagnostics/annotations.hpp0000644000076500000240000006453511172433107016334 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/annotations.hpp * * $Id: front_end.hpp,v 1.20 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Conditional Macros for annotating code. This * file is meant as a quick interface -- a library should come with * its own annotations file (a template exists as * lib_annotations.hpp), such that it can be used at a specific build * level and with a specific configuration. */ #ifndef DIAGNOSTICS__ANNOTATIONS__INCLUDE_GUARD #define DIAGNOSTICS__ANNOTATIONS__INCLUDE_GUARD #include #include #include #include #include #include // ATTENTION: defined a second time in diagnostics/instrumentation.hpp #ifndef DIAGNOSTICS_DEBUG__LEVEL__ # define DIAGNOSTICS_DEBUG__LEVEL__ 2 #endif #ifndef DIAGNOSTICS_INLINE # if DIAGNOSTICS_DEBUG__LEVEL__ == 0 # define DIAGNOSTICS_INLINE inline # else # define DIAGNOSTICS_INLINE # endif #endif #ifndef DIAGNOSTICS_BASE_EXCEPTION_TYPE # define DIAGNOSTICS_BASE_EXCEPTION_TYPE ::diagnostics::Exception # include # define DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT(EX) (::std::string("EXCEPTION=\"") + (EX).name() + "\" WHAT=\"" + (EX).what() + "\"") #endif #ifndef DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY # define DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY 0 #endif #ifndef DIAGNOSTICS_FAILED_ASSERT_ACTION # define DIAGNOSTICS_FAILED_ASSERT_ACTION(LEVEL,NAME,COND) throw NAME(#COND) #endif #ifndef DIAGNOSTICS_FAILED_ASSERT_ACTION1 # define DIAGNOSTICS_FAILED_ASSERT_ACTION1(LEVEL,NAME,COND,EXCEP_WHAT) throw NAME(EXCEP_WHAT) #endif #ifndef DIAGNOSTICS_FAILED_CHECK_ACTION # define DIAGNOSTICS_FAILED_CHECK_ACTION(LEVEL,NAME,COND) throw NAME(#COND) #endif #ifndef DIAGNOSTICS_FAILED_CHECK_ACTION1 # define DIAGNOSTICS_FAILED_CHECK_ACTION1(LEVEL,NAME,COND,EXCEP_WHAT) throw NAME(EXCEP_WHAT) #endif #ifndef DIAGNOSTICS_NR_WHAT_DEFAULT # define DIAGNOSTICS_NR_WHAT_DEFAULT 0 #endif //////////////////////////////////////////////////////////////////////////////// // derived config #if DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY == 1 # include #endif #ifndef DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT # warning DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT not defined #endif //////////////////////////////////////////////////////////////////////////////// // AUDIT #if DIAGNOSTICS_DEBUG__LEVEL__ > 1 # define DIAGNOSTICS_AUDIT_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_AUDIT,::diagnostics::TYPE_TRACE,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_AUDIT_BINARY_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_AUDIT,::diagnostics::TYPE_TRACE_BINARY,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_AUDIT_BLOCK_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_AUDIT_BLOCK_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define DIAGNOSTICS_AUDIT_BLOCK_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_AUDIT_PROCEDURE_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_AUDIT_PROCEDURE_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define DIAGNOSTICS_AUDIT_PROCEDURE_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_AUDIT_METHOD_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("MEHTOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_AUDIT_METHOD_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define DIAGNOSTICS_AUDIT_METHOD_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_AUDIT_ASSERT(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ DIAGNOSTICS_FAILED_ASSERT_ACTION(::diagnostics::LEVEL_AUDIT,NAME,COND)) # define DIAGNOSTICS_AUDIT_ASSERT1(NAME,COND,EXCEP_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (EXCEP_WHAT) + "\"",\ (COND),\ DIAGNOSTICS_FAILED_ASSERT_ACTION1(::diagnostics::LEVEL_AUDIT,NAME,COND,EXCEP_WHAT)) # define DIAGNOSTICS_AUDIT_ASSERT_LOG(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,NAME,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ ((void)0)) # define DIAGNOSTICS_AUDIT_ASSERT_LOG1(NAME,COND,EXCEP_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,NAME,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (EXCEP_WHAT) + "\"",\ (COND),\ ((void)0)) # define DIAGNOSTICS_AUDIT_CHECK(NAME,COND) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_AUDIT,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ DIAGNOSTICS_FAILED_CHECK_ACTION(::diagnostics::LEVEL_AUDIT,NAME,COND)) # define DIAGNOSTICS_AUDIT_CHECK1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_AUDIT,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ DIAGNOSTICS_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_AUDIT,NAME,COND,STR_WHAT)) # define DIAGNOSTICS_AUDIT_CLASS_THROWING_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER # define DIAGNOSTICS_AUDIT_CLASS_THROWING_INVARIANCE_EXIT \ DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(::diagnostics::LEVEL_AUDIT,\ DIAGNOSTICS_NR_WHAT_DEFAULT, \ DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ DIAGNOSTICS_BASE_EXCEPTION_TYPE,\ DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT) # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_GUARD DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_EXIT DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_ASSERT DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT # define DIAGNOSTICS_AUDIT_EXCEPTIONLESS_BLOCK_ENTER DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER # define DIAGNOSTICS_AUDIT_EXCEPTIONLESS_BLOCK_EXIT \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(::diagnostics::LEVEL_AUDIT,\ DIAGNOSTICS_NR_WHAT_DEFAULT, \ true,\ DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ DIAGNOSTICS_BASE_EXCEPTION_TYPE,\ DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT) #else # define DIAGNOSTICS_AUDIT_TRACE(STR_WHAT) ((void)0) # define DIAGNOSTICS_AUDIT_BINARY_TRACE(STR_WHAT) ((void)0) # define DIAGNOSTICS_AUDIT_BLOCK_ENTER(STR_WHAT) do { # define DIAGNOSTICS_AUDIT_BLOCK_EXIT } while(false) # define DIAGNOSTICS_AUDIT_BLOCK_GUARD(STR_WHAT) ((void)0) # define DIAGNOSTICS_AUDIT_PROCEDURE_ENTER(STR_WHAT) do { # define DIAGNOSTICS_AUDIT_PROCEDURE_EXIT } while(false) # define DIAGNOSTICS_AUDIT_PROCEDURE_GUARD(STR_WHAT) ((void)0) # define DIAGNOSTICS_AUDIT_METHOD_ENTER(STR_WHAT) do { # define DIAGNOSTICS_AUDIT_METHOD_EXIT } while(false) # define DIAGNOSTICS_AUDIT_METHOD_GUARD(STR_WHAT) ((void)0) # define DIAGNOSTICS_AUDIT_ASSERT(NAME,COND) ((void)0) # define DIAGNOSTICS_AUDIT_ASSERT1(NAME,COND,STR_WHAT) ((void)0) # define DIAGNOSTICS_AUDIT_CHECK(NAME,COND) ((void)0) # define DIAGNOSTICS_AUDIT_CHECK1(NAME,COND,STR_WHAT) ((void)0) # define DIAGNOSTICS_AUDIT_CLASS_THROWING_INVARIANCE_ENTER do { # define DIAGNOSTICS_AUDIT_CLASS_THROWING_INVARIANCE_EXIT } while(false) # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_GUARD ((void)0) # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_ENTER do { # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_EXIT } while(false) # define DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_ASSERT ((void)0) # define DIAGNOSTICS_AUDIT_EXCEPTIONLESS_BLOCK_ENTER do { # define DIAGNOSTICS_AUDIT_EXCEPTIONLESS_BLOCK_EXIT } while(false) #endif //////////////////////////////////////////////////////////////////////////////// #if DIAGNOSTICS_DEBUG__LEVEL__ > 0 # define DIAGNOSTICS_DEBUG_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_DEBUG,::diagnostics::TYPE_TRACE,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_DEBUG_BINARY_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_DEBUG,::diagnostics::TYPE_TRACE_BINARY,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_DEBUG_BLOCK_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_DEBUG_BLOCK_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define DIAGNOSTICS_DEBUG_BLOCK_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) # define DIAGNOSTICS_DEBUG_PROCEDURE_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_DEBUG_PROCEDURE_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define DIAGNOSTICS_DEBUG_PROCEDURE_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_DEBUG_METHOD_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("MEHTOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_DEBUG_METHOD_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define DIAGNOSTICS_DEBUG_METHOD_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define DIAGNOSTICS_DEBUG_ASSERT(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_DEBUG,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ DIAGNOSTICS_FAILED_ASSERT_ACTION(::diagnostics::LEVEL_DEBUG,NAME,COND)) # define DIAGNOSTICS_DEBUG_ASSERT1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_DEBUG,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ DIAGNOSTICS_FAILED_ASSERT_ACTION1(::diagnostics::LEVEL_DEBUG,NAME,COND,STR_WHAT)) # define DIAGNOSTICS_DEBUG_CHECK(NAME,COND) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_DEBUG,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ DIAGNOSTICS_FAILED_CHECK_ACTION(::diagnostics::LEVEL_DEBUG,NAME,COND)) # define DIAGNOSTICS_DEBUG_CHECK1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_DEBUG,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ DIAGNOSTICS_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_DEBUG,NAME,COND,STR_WHAT)) # define DIAGNOSTICS_DEBUG_CLASS_THROWING_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER # define DIAGNOSTICS_DEBUG_CLASS_THROWING_INVARIANCE_EXIT \ DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(::diagnostics::LEVEL_DEBUG,\ DIAGNOSTICS_NR_WHAT_DEFAULT, \ DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ DIAGNOSTICS_BASE_EXCEPTION_TYPE,\ DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT) # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_GUARD DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_EXIT DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_ASSERT DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT # define DIAGNOSTICS_DEBUG_EXCEPTIONLESS_BLOCK_ENTER DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER # define DIAGNOSTICS_DEBUG_EXCEPTIONLESS_BLOCK_EXIT \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(::diagnostics::LEVEL_DEBUG,\ DIAGNOSTICS_NR_WHAT_DEFAULT, \ true,\ DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ DIAGNOSTICS_BASE_EXCEPTION_TYPE,\ DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT) #else # define DIAGNOSTICS_DEBUG_TRACE(STR_WHAT) ((void)0) # define DIAGNOSTICS_DEBUG_BINARY_TRACE(STR_WHAT) ((void)0) # define DIAGNOSTICS_DEBUG_BLOCK_ENTER(STR_WHAT) do { # define DIAGNOSTICS_DEBUG_BLOCK_EXIT } while(false) # define DIAGNOSTICS_DEBUG_BLOCK_GUARD(STR_WHAT) ((void)0) # define DIAGNOSTICS_DEBUG_PROCEDURE_ENTER(STR_WHAT) do { # define DIAGNOSTICS_DEBUG_PROCEDURE_EXIT } while(false) # define DIAGNOSTICS_DEBUG_PROCEDURE_GUARD(STR_WHAT) ((void)0) # define DIAGNOSTICS_DEBUG_METHOD_ENTER(STR_WHAT) do { # define DIAGNOSTICS_DEBUG_METHOD_EXIT } while(false) # define DIAGNOSTICS_DEBUG_METHOD_GUARD(STR_WHAT) ((void)0) # define DIAGNOSTICS_DEBUG_ASSERT(NAME,COND) ((void)0) # define DIAGNOSTICS_DEBUG_ASSERT1(NAME,COND,STR_WHAT) ((void)0) # define DIAGNOSTICS_DEBUG_CHECK(NAME,COND) ((void)0) # define DIAGNOSTICS_DEBUG_CHECK1(NAME,COND,STR_WHAT) ((void)0) # define DIAGNOSTICS_DEBUG_CLASS_THROWING_INVARIANCE_ENTER do { # define DIAGNOSTICS_DEBUG_CLASS_THROWING_INVARIANCE_EXIT } while(false) # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_GUARD ((void)0) # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_ENTER do { # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_EXIT } while(false) # define DIAGNOSTICS_DEBUG_CLASS_INVARIANCE_ASSERT ((void)0) # define DIAGNOSTICS_DEBUG_EXCEPTIONLESS_BLOCK_ENTER do { # define DIAGNOSTICS_DEBUG_EXCEPTIONLESS_BLOCK_EXIT } while(false) #endif //////////////////////////////////////////////////////////////////////////////// #define DIAGNOSTICS_PROD_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) #define DIAGNOSTICS_PROD_BINARY_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE_BINARY,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) #define DIAGNOSTICS_PROD_TRACE1(NR_WHAT,STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE,(NR_WHAT),(STR_WHAT)) #define DIAGNOSTICS_PROD_BINARY_TRACE1(NR_WHAT,STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE_BINARY,(NR_WHAT),(STR_WHAT)) #define DIAGNOSTICS_PROD_BLOCK_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) #define DIAGNOSTICS_PROD_BLOCK_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define DIAGNOSTICS_PROD_BLOCK_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT,(STR_WHAT)) #define DIAGNOSTICS_PROD_PROCEDURE_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) #define DIAGNOSTICS_PROD_PROCEDURE_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define DIAGNOSTICS_PROD_PROCEDURE_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) #define DIAGNOSTICS_PROD_METHOD_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("MEHTOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) #define DIAGNOSTICS_PROD_METHOD_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define DIAGNOSTICS_PROD_METHOD_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,DIAGNOSTICS_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) #define DIAGNOSTICS_PROD_ASSERT(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_PROD,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ DIAGNOSTICS_FAILED_ASSERT_ACTION(::diagnostics::LEVEL_PROD,NAME,COND)) #define DIAGNOSTICS_PROD_ASSERT1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_PROD,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ DIAGNOSTICS_FAILED_ASSERT_ACTION1(::diagnostics::LEVEL_PROD,NAME,COND,STR_WHAT)) #define DIAGNOSTICS_PROD_CLASS_THROWING_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER #define DIAGNOSTICS_PROD_CLASS_THROWING_INVARIANCE_EXIT \ DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(::diagnostics::LEVEL_PROD,\ DIAGNOSTICS_NR_WHAT_DEFAULT, \ DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ DIAGNOSTICS_BASE_EXCEPTION_TYPE,\ DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT) #define DIAGNOSTICS_PROD_CLASS_INVARIANCE_GUARD DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD #define DIAGNOSTICS_PROD_CLASS_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER #define DIAGNOSTICS_PROD_CLASS_INVARIANCE_EXIT DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT #define DIAGNOSTICS_PROD_CLASS_INVARIANCE_ASSERT DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT #define DIAGNOSTICS_PROD_EXCEPTIONLESS_BLOCK_ENTER DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER #define DIAGNOSTICS_PROD_EXCEPTIONLESS_BLOCK_EXIT \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(::diagnostics::LEVEL_PROD,\ DIAGNOSTICS_NR_WHAT_DEFAULT, \ true,\ DIAGNOSTICS_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ DIAGNOSTICS_BASE_EXCEPTION_TYPE,\ DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT) #if DIAGNOSTICS_DEBUG__LEVEL__ > 0 # define DIAGNOSTICS_PROD_CHECK(NAME,COND) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_PROD,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ DIAGNOSTICS_FAILED_CHECK_ACTION(::diagnostics::LEVEL_PROD,NAME,COND)) # define DIAGNOSTICS_PROD_CHECK1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_PROD,\ DIAGNOSTICS_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ DIAGNOSTICS_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_PROD,NAME,COND,STR_WHAT)) #else # define DIAGNOSTICS_PROD_CHECK(NAME,COND) \ do { if(!(COND)) { DIAGNOSTICS_FAILED_CHECK_ACTION(::diagnostics::LEVEL_PROD,NAME,COND); } } while(false) # define DIAGNOSTICS_PROD_CHECK1(NAME,COND,STR_WHAT) \ do { if(!(COND)) { DIAGNOSTICS_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_PROD,NAME,COND,STR_WHAT); } } while(false) #endif #define DIAGNOSTICS_METHOD_GUARD(STR_WHAT) DIAGNOSTICS_AUDIT_METHOD_GUARD(STR_WHAT); DIAGNOSTICS_AUDIT_CLASS_INVARIANCE_GUARD #define DIAGNOSTICS_AUDIT_ASSERT_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(DIAGNOSTICS_AUDIT_ASSERT1,NAME,OP1,REL,OP2) #define DIAGNOSTICS_AUDIT_CHECK_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(DIAGNOSTICS_AUDIT_CHECK1,NAME,OP1,REL,OP2) #define DIAGNOSTICS_DEBUG_ASSERT_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(DIAGNOSTICS_DEBUG_ASSERT1,NAME,OP1,REL,OP2) #define DIAGNOSTICS_DEBUG_CHECK_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(DIAGNOSTICS_DEBUG_CHECK1,NAME,OP1,REL,OP2) #define DIAGNOSTICS_PROD_ASSERT_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(DIAGNOSTICS_PROD_ASSERT1,NAME,OP1,REL,OP2) #define DIAGNOSTICS_PROD_CHECK_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(DIAGNOSTICS_PROD_CHECK1,NAME,OP1,REL,OP2) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/basic_exceptions/0000755000076500000240000000000011567507572016673 500000000000000diagnostics-0.3.3/diagnostics/basic_exceptions/invalid_argument.cpp0000644000076500000240000000354111172433106022631 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/invalid_argument.cpp * * @brief Exception in case of in invalid argument * * * $Id: invalid_argument.cpp 296 2007-11-27 00:21:41Z tautschn $ * * @author Christian Schallhart * @date Thu Nov 23 08:14:30 CET 2006 */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Invalid_Argument::~Invalid_Argument() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } Invalid_Argument::Invalid_Argument(Self const & other) : Super(other) { } Invalid_Argument::Invalid_Argument(::std::string const & what) : Super(what) { } char const * Invalid_Argument::name() const { return "Invalid_Argument"; } DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/basic_exceptions/invalid_argument.hpp0000644000076500000240000000443011172433106022634 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/invalid_argument.hpp * * @brief Exception in case of in invalid argument * * @author Christian Schallhart * * @version $Id: invalid_argument.hpp 296 2007-11-27 00:21:41Z tautschn $ * */ #ifndef DIAGNOSTICS__BASIC_EXCEPTIONS__INVALID_ARGUMENT_HPP__INCLUDE_GUARD #define DIAGNOSTICS__BASIC_EXCEPTIONS__INVALID_ARGUMENT_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Invalid_Argument * * @brief The exception to be used if an argument is invalid. Please * note that Invalid_Argument is a @ref Low_Level_Exception -- and * thus its use is restricted. * * @nosubgrouping */ class Invalid_Argument : public Low_Level_Exception { typedef Invalid_Argument Self; typedef Low_Level_Exception Super; public: virtual ~Invalid_Argument() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; explicit Invalid_Argument(::std::string const & what); virtual char const * name() const; Invalid_Argument(Self const & other); }; DIAGNOSTICS_NAMESPACE_END; #endif /* DIAGNOSTICS__BASIC_EXCEPTIONS__INVALID_ARGUMENT_HPP__INCLUDE_GUARD */ diagnostics-0.3.3/diagnostics/basic_exceptions/invalid_protocol.cpp0000644000076500000240000000361411172433106022651 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/invalid_protocol.cpp * * @brief Exception to be thrown if the interaction protocol is not followed * appropriately * * * $Id: invalid_protocol.cpp 296 2007-11-27 00:21:41Z tautschn $ * * @author Christian Schallhart * @date Thu Nov 23 08:15:42 CET 2006 */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Invalid_Protocol::~Invalid_Protocol() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } Invalid_Protocol::Invalid_Protocol(Self const & other) : Super(other) { } Invalid_Protocol::Invalid_Protocol(::std::string const & what) : Super(what) { } char const * Invalid_Protocol::name() const { return "Invalid_Protocol"; } DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/basic_exceptions/invalid_protocol.hpp0000644000076500000240000000436711172433106022664 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/invalid_protocol.hpp * * @brief Exception to be thrown if the interaction protocol is not followed * appropriately * * @author Christian Schallhart * * @version $Id: invalid_protocol.hpp 296 2007-11-27 00:21:41Z tautschn $ */ #ifndef DIAGNOSTICS__BASIC_EXCEPTIONS__INVALID_PROTOCOL_HPP__INCLUDE_GUARD #define DIAGNOSTICS__BASIC_EXCEPTIONS__INVALID_PROTOCOL_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Invalid_Protocol * * @brief Exception to be thrown if the interaction protocol is not followed * appropriately * * @nosubgrouping */ class Invalid_Protocol : public Low_Level_Exception { typedef Invalid_Protocol Self; typedef Low_Level_Exception Super; public: virtual ~Invalid_Protocol() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; explicit Invalid_Protocol(::std::string const & what); virtual char const * name() const; Invalid_Protocol(Self const & other); }; DIAGNOSTICS_NAMESPACE_END; #endif /* DIAGNOSTICS__BASIC_EXCEPTIONS__INVALID_PROTOCOL_HPP__INCLUDE_GUARD */ diagnostics-0.3.3/diagnostics/basic_exceptions/low_level_exception.cpp0000644000076500000240000000350311172433106023345 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/low_level_exception.cpp * * @brief Interface @ref ::diagnostics::Low_Level_Exception. * * * $Id: low_level_exception.cpp 296 2007-11-27 00:21:41Z tautschn $ * * @author Christian Schallhart * @date Thu Nov 23 08:16:55 CET 2006 */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Low_Level_Exception::~Low_Level_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } Low_Level_Exception::Low_Level_Exception(::std::string const & what) : Std_Exception(what) { } Low_Level_Exception::Low_Level_Exception(Self const & other) : Std_Exception(other) { } DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/basic_exceptions/low_level_exception.hpp0000644000076500000240000000601311172433106023351 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/low_level_exception.hpp * * @author Christian Schallhart * * @version $Id: low_level_exception.hpp 296 2007-11-27 00:21:41Z tautschn $ * * @brief Interface @ref ::diagnostics::Low_Level_Exception. * * @note DOCUMENTED */ #ifndef DIAGNOSTICS__BASIC_EXCEPTIONS__LOW_LEVEL_EXCEPTION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__BASIC_EXCEPTIONS__LOW_LEVEL_EXCEPTION_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Low_Level_Exception * * @brief Interface for all low-level exceptions, i.e., exceptions * which are used when no further context is knwon or when the error * situation is only checked for in AUD_LEVEL and DEB_LEVEL. * * For example @ref Invalid_Argument is ued in all error situations, * where an invalid argument has been used. If the reason for the * invalid argument can occur at PRO_LEVEL you either @arg catch the * exeption and rethrow a more helpful exception at a level where you * have all the information for doing so, or @arg you will throw a * more helpful exception right away. * * @nosubgrouping */ class Low_Level_Exception : public Std_Exception { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Low_Level_Exception Self; /// @} //////////////////////////////////////////////////////////////////////////////// /** * @name Construction/Destruction/Assignment * @{ */ public: explicit Low_Level_Exception( ::std::string const & what ); virtual ~Low_Level_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; Low_Level_Exception(Self const & other); private: Low_Level_Exception(); Self& operator=(Self const & rhs); /// @} }; DIAGNOSTICS_NAMESPACE_END; #endif /* DIAGNOSTICS__BASIC_EXCEPTIONS__LOW_LEVEL_EXCEPTION_HPP__INCLUDE_GUARD */ diagnostics-0.3.3/diagnostics/basic_exceptions/Makefile.am0000644000076500000240000000147011147523135020634 00000000000000# This Makefile.am is maintained by config/update-makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libbasic_exceptions.la libbasic_exceptions_la_SOURCES = invalid_argument.cpp invalid_protocol.cpp low_level_exception.cpp not_implemented.cpp parse_error.cpp violated_invariance.cpp include_diagnostics_basic_exceptionsdir = $(includedir)/diagnostics/basic_exceptions include_diagnostics_basic_exceptions_HEADERS = invalid_argument.hpp invalid_protocol.hpp low_level_exception.hpp not_implemented.hpp parse_error.hpp violated_invariance.hpp diagnostics-0.3.3/diagnostics/basic_exceptions/Makefile.in0000644000076500000240000006575711567506171020676 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_basic_exceptions_HEADERS) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/model.am subdir = diagnostics/basic_exceptions ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libbasic_exceptions_la_LIBADD = am_libbasic_exceptions_la_OBJECTS = invalid_argument.lo \ invalid_protocol.lo low_level_exception.lo not_implemented.lo \ parse_error.lo violated_invariance.lo libbasic_exceptions_la_OBJECTS = $(am_libbasic_exceptions_la_OBJECTS) DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libbasic_exceptions_la_SOURCES) DIST_SOURCES = $(libbasic_exceptions_la_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_basic_exceptionsdir)" HEADERS = $(include_diagnostics_basic_exceptions_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update-makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libbasic_exceptions.la libbasic_exceptions_la_SOURCES = invalid_argument.cpp invalid_protocol.cpp low_level_exception.cpp not_implemented.cpp parse_error.cpp violated_invariance.cpp include_diagnostics_basic_exceptionsdir = $(includedir)/diagnostics/basic_exceptions include_diagnostics_basic_exceptions_HEADERS = invalid_argument.hpp invalid_protocol.hpp low_level_exception.hpp not_implemented.hpp parse_error.hpp violated_invariance.hpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/basic_exceptions/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/basic_exceptions/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libbasic_exceptions.la: $(libbasic_exceptions_la_OBJECTS) $(libbasic_exceptions_la_DEPENDENCIES) $(CXXLINK) $(libbasic_exceptions_la_OBJECTS) $(libbasic_exceptions_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/invalid_argument.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/invalid_protocol.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/low_level_exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/not_implemented.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse_error.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/violated_invariance.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_basic_exceptionsHEADERS: $(include_diagnostics_basic_exceptions_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_basic_exceptionsdir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_basic_exceptionsdir)" @list='$(include_diagnostics_basic_exceptions_HEADERS)'; test -n "$(include_diagnostics_basic_exceptionsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_basic_exceptionsdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_basic_exceptionsdir)" || exit $$?; \ done uninstall-include_diagnostics_basic_exceptionsHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_basic_exceptions_HEADERS)'; test -n "$(include_diagnostics_basic_exceptionsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_basic_exceptionsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_basic_exceptionsdir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_basic_exceptionsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnostics_basic_exceptionsHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_basic_exceptionsHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am \ install-include_diagnostics_basic_exceptionsHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_basic_exceptionsHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/basic_exceptions/not_implemented.cpp0000644000076500000240000000365511172433106022472 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/not_implemented.cpp * * @brief Exception to be thrown in case a part of code is reached that is not * (fully) implemented and thus should not have been reached. * * $Id: not_implemented.cpp 296 2007-11-27 00:21:41Z tautschn $ * * @author Christian Schallhart * @date Thu Nov 23 08:18:26 CET 2006 */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Not_Implemented::~Not_Implemented() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } Not_Implemented::Not_Implemented(Self const & other) : Super(other) { } Not_Implemented::Not_Implemented(::std::string const & what) : Super(what) { } char const * Not_Implemented::name() const { return "Not_Implemented"; } DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/basic_exceptions/not_implemented.hpp0000644000076500000240000000451311172433106022471 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/not_implemented.hpp * * @brief Exception to be thrown in case a part of code is reached that is not * (fully) implemented and thus should not have been reached. * * @author Christian Schallhart * * @version $Id: not_implemented.hpp 296 2007-11-27 00:21:41Z tautschn $ */ #ifndef DIAGNOSTICS__BASIC_EXCEPTIONS__NOT_IMPLEMENTED_HPP__INCLUDE_GUARD #define DIAGNOSTICS__BASIC_EXCEPTIONS__NOT_IMPLEMENTED_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Not_Implemented * * @brief Exception to be thrown in case a part of code is reached that is not * (fully) implemented and thus should not have been reached. * * @nosubgrouping */ class Not_Implemented : public Low_Level_Exception { typedef Not_Implemented Self; typedef Low_Level_Exception Super; public: virtual ~Not_Implemented() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; explicit Not_Implemented(::std::string const & what); virtual char const * name() const; Not_Implemented(Self const & other); }; DIAGNOSTICS_NAMESPACE_END; #endif /* DIAGNOSTICS__BASIC_EXCEPTIONS__NOT_IMPLEMENTED_HPP__INCLUDE_GUARD */ diagnostics-0.3.3/diagnostics/basic_exceptions/parse_error.cpp0000644000076500000240000000350011172433106021617 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/parse_error.cpp * * @brief Interface @ref ::diagnostics::Parse_Error. * * $Id: parse_error.cpp 296 2007-11-27 00:21:41Z tautschn $ * * @author Christian Schallhart * @date Thu Nov 23 08:19:41 CET 2006 */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Parse_Error::~Parse_Error() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } Parse_Error::Parse_Error(::std::string const & what) : Low_Level_Exception(what) { } Parse_Error::Parse_Error(Self const & other) : Low_Level_Exception(other) { } char const * Parse_Error::name() const { return "Parse_Error"; } DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/basic_exceptions/parse_error.hpp0000644000076500000240000000516711172433106021637 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/parse_error.hpp * * @author Christian Schallhart * * @version $Id: parse_error.hpp 296 2007-11-27 00:21:41Z tautschn $ * * @brief Interface @ref ::diagnostics::Parse_Error. * * @note DOCUMENTED */ #ifndef DIAGNOSTICS__BASIC_EXCEPTIONS__PARSE_ERROR_HPP__INCLUDE_GUARD #define DIAGNOSTICS__BASIC_EXCEPTIONS__PARSE_ERROR_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Parse_Error * * @brief Interface @ref ::diagnostics::Parse_Error. * * @nosubgrouping */ class Parse_Error : public Low_Level_Exception { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Parse_Error Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Construction/Destruction/Assignment * @{ */ public: explicit Parse_Error( ::std::string const & what ); virtual ~Parse_Error() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; Parse_Error(Self const & other); private: Parse_Error(); Self& operator=(Self const & rhs); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Implementation of @ref Exception * @{ */ public: virtual char const * name() const; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif /* DIAGNOSTICS__BASIC_EXCEPTIONS__PARSE_ERROR_HPP__INCLUDE_GUARD */ diagnostics-0.3.3/diagnostics/basic_exceptions/violated_invariance.cpp0000644000076500000240000000362611172433106023313 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/violated_invariance.cpp * * @brief The exception to be used if a code invariance is does not hold. * * $Id: violated_invariance.cpp 296 2007-11-27 00:21:41Z tautschn $ * * @author Christian Schallhart * @date Thu Nov 23 08:21:06 CET 2006 */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Violated_Invariance::~Violated_Invariance() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } Violated_Invariance::Violated_Invariance(Self const & other) : Super(other) { } Violated_Invariance::Violated_Invariance(::std::string const & what) : Super(what) { } char const * Violated_Invariance::name() const { return "Violated_Invariance"; } DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/basic_exceptions/violated_invariance.hpp0000644000076500000240000000453411172433106023317 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/basic_exceptions/violated_invariance.hpp * * @brief The exception to be used if a code invariance is does not hold. * * @author Christian Schallhart * * @version $Id: violated_invariance.hpp 296 2007-11-27 00:21:41Z tautschn $ */ #ifndef DIAGNOSTICS__BASIC_EXCEPTIONS__VIOLATED_INVARIANCE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__BASIC_EXCEPTIONS__VIOLATED_INVARIANCE_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Violated_Invariance * * @brief The exception to be used if a code invariance is does not hold. Please * note that Violated_Invariance is a @ref Low_Level_Exception -- and * thus its use is restricted. * * @nosubgrouping */ class Violated_Invariance : public Low_Level_Exception { typedef Violated_Invariance Self; typedef Low_Level_Exception Super; public: virtual ~Violated_Invariance() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; explicit Violated_Invariance(::std::string const & what); virtual char const * name() const; Violated_Invariance(Self const & other); }; DIAGNOSTICS_NAMESPACE_END; #endif /* DIAGNOSTICS__BASIC_EXCEPTIONS__VIOLATED_INVARIANCE_HPP__INCLUDE_GUARD */ diagnostics-0.3.3/diagnostics/configuration.hpp0000644000076500000240000000375611172433107016644 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/configuration.hpp * * $Id: configuration.hpp,v 1.10 2005/06/23 09:54:18 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Use-Case: The include-files for configuring * the diagnostics framework. * * Include this file only, if you have to configure the diagnostics * framework (usually the case in the main-component of an * executable). If you only use the diagnostics framework, include * @ref diagnostics/macros/front_end.hpp (probably, you are not doing * this directly, see the documentation of this file). If you are * testing, include diagnostics/unittest.hpp. */ #ifndef DIAGNOSTICS__CONFIGURATION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__CONFIGURATION_HPP__INCLUDE_GUARD #include #include #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/0000755000076500000240000000000011567507566015553 500000000000000diagnostics-0.3.3/diagnostics/extensions/instrumentation/0000755000076500000240000000000011567507566021016 500000000000000diagnostics-0.3.3/diagnostics/extensions/instrumentation/annotations.hpp0000644000076500000240000000715111172433104023762 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/extensions/instrumentation/annotation.hpp * * $Id: configuration.hpp,v 1.10 2005/06/23 09:54:18 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: alpha] */ #ifndef DIAGNOSTICS__EXTENSIONS__INSTRUMENTATION__ANNOTATION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__INSTRUMENTATION__ANNOTATION_HPP__INCLUDE_GUARD #include #include #include #include #include /** * @brief Instruments a call to some C-procedure to generate a log * message on entering and leaving this procedure (@ref * ::diagnostics::TYPE_PROCEDURE_ENTER, @ref * ::diagnostics::TYPE_PROCEDURE_EXIT). * * The macro outpus a procedure with the signature of the original * procedure which generates the log messages, loads the procedure * from a shared library (on the first time calling), and calls the * procedure then. * * @note This SHOULD be thread safe -- load_symbol calls dlopen, and * the latter can be called more than once safely. Thus two threads * might concurrently load the same symbol, but the obtained and * stored pointer should be identical. * * @param LEVEL is the @a ::diagnostics::Level_t of the log messages * to generated. * @param LIB_NAME is the name of library to provide the procedure * @param RETURN_TYPE is the return type of procedure * @param PROC is the procdure -- written as identifier * @param ARGS are the arguemtns to the procdure, completely written * out with embracing parenthesis. * @param THROW is the throw declaration of the procdure. * @param MESG is the what string to be added into the generated log-messages, * prefixed by PROCDURE=. */ #define DIAGNOSTICS_BASE_INSTRUMENT_C_CALL(LEVEL,LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) \ RETURN_TYPE PROC ARGS THROW \ { \ DIAGNOSTICS_BASE_BLOCK_GUARD((LEVEL), \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,0, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (MESG)); \ typedef RETURN_TYPE (*Proc_t) ARGS ; \ static Proc_t real_proc=NULL; \ if(real_proc==NULL) \ real_proc = (Proc_t)::diagnostics::internal::load_symbol((LIB_NAME),#PROC); \ return (*real_proc) CALL; \ } void do_not_call_this_method_which_is_only_declared_for_a_semicolon(void) #endif diagnostics-0.3.3/diagnostics/extensions/instrumentation/load_symbol.cpp0000644000076500000240000000472511335034404023731 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; void * load_symbol(char const * const lib_name, char const * const sym_name) { DIAGNOSTICS_BASE_BLOCK_GUARD(LEVEL_SYSTEM,TYPE_BLOCK_ENTER,TYPE_BLOCK_EXIT,0, to_string("INST: Loading '",sym_name,"' from '",lib_name,"'")); if((0!=lt_dlinit())) { ::std::string const msg(to_string("INST: Initializing LTDL failed")); DIAGNOSTICS_BASE_LOG(LEVEL_SYSTEM,TYPE_TRACE,0, msg); DIAGNOSTICS_PANIC_LOG(msg); ::std::exit (1); } const lt_dlhandle handle(lt_dlopen(lib_name)); char const *err; if((err=lt_dlerror())) { ::std::string const msg(to_string("INST: Opening '",lib_name,"' FAILED: '",err,"'")); DIAGNOSTICS_BASE_LOG(LEVEL_SYSTEM,TYPE_TRACE,0, msg); DIAGNOSTICS_PANIC_LOG(msg); ::std::exit (1); } void * const result(lt_dlsym(handle,sym_name)); if((err=lt_dlerror())) { ::std::string const msg(to_string("INST: Loading: '",sym_name,"' FAILED: '",err,"'")); DIAGNOSTICS_BASE_LOG(LEVEL_SYSTEM,TYPE_TRACE,0, msg); DIAGNOSTICS_PANIC_LOG(msg); ::std::exit (1); } return result; } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/instrumentation/load_symbol.hpp0000644000076500000240000000442011172433104023725 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/extensions/instrumentation/load_symbol.hpp * * $Id: configuration.hpp,v 1.10 2005/06/23 09:54:18 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: alpha] * * @todo document * * @todo add compile switching of this feature * * @todo add configuration for dlcfn */ #ifndef DIAGNOSTICS__EXTENSIONS__INSTRUMENTATION__LOAD_SYMBOL_HPP__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__INSTRUMENTATION__LOAD_SYMBOL_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @brief loads and returns the symbol with name @a sym_name from * library @a lib_name. * * @attention If an error occurs during loading (e.g., the library @a * lib_name does not exist or does not contain a symbol of name @a * sym_name), a log message is sent to the ordinary log-stream and to * the panic log. Then exit(1) will be called. * * Log messages are generated on calling this method. * * @throw never */ void * load_symbol(char const * const lib_name, char const * const sym_name); INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/instrumentation/Makefile.am0000644000076500000240000000133211335633241022750 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = AM_CPPFLAGS += $(LTDLINCL) noinst_LTLIBRARIES = libinstrumentation.la libinstrumentation_la_SOURCES = load_symbol.cpp pkginclude_HEADERS = annotations.hpp load_symbol.hpp include_diagnostics_extensions_instrumentationdir = $(includedir)/diagnostics/extensions/instrumentation include_diagnostics_extensions_instrumentation_HEADERS = annotations.hpp load_symbol.hpp diagnostics-0.3.3/diagnostics/extensions/instrumentation/Makefile.in0000644000076500000240000006723711567506171023011 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = \ $(include_diagnostics_extensions_instrumentation_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am subdir = diagnostics/extensions/instrumentation ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libinstrumentation_la_LIBADD = am_libinstrumentation_la_OBJECTS = load_symbol.lo libinstrumentation_la_OBJECTS = $(am_libinstrumentation_la_OBJECTS) DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libinstrumentation_la_SOURCES) DIST_SOURCES = $(libinstrumentation_la_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_extensions_instrumentationdir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_extensions_instrumentation_HEADERS) \ $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) \ $(LTDLINCL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libinstrumentation.la libinstrumentation_la_SOURCES = load_symbol.cpp pkginclude_HEADERS = annotations.hpp load_symbol.hpp include_diagnostics_extensions_instrumentationdir = $(includedir)/diagnostics/extensions/instrumentation include_diagnostics_extensions_instrumentation_HEADERS = annotations.hpp load_symbol.hpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/extensions/instrumentation/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/extensions/instrumentation/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libinstrumentation.la: $(libinstrumentation_la_OBJECTS) $(libinstrumentation_la_DEPENDENCIES) $(CXXLINK) $(libinstrumentation_la_OBJECTS) $(libinstrumentation_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/load_symbol.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_extensions_instrumentationHEADERS: $(include_diagnostics_extensions_instrumentation_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_extensions_instrumentationdir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_extensions_instrumentationdir)" @list='$(include_diagnostics_extensions_instrumentation_HEADERS)'; test -n "$(include_diagnostics_extensions_instrumentationdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_extensions_instrumentationdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_extensions_instrumentationdir)" || exit $$?; \ done uninstall-include_diagnostics_extensions_instrumentationHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_extensions_instrumentation_HEADERS)'; test -n "$(include_diagnostics_extensions_instrumentationdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_extensions_instrumentationdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_extensions_instrumentationdir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_extensions_instrumentationdir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: \ install-include_diagnostics_extensions_instrumentationHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_extensions_instrumentationHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am \ install-include_diagnostics_extensions_instrumentationHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgincludeHEADERS install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_extensions_instrumentationHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/extensions/Makefile.am0000644000076500000240000000076411335051736017520 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = instrumentation memory if STACKTRACE SUBDIRS += stacktrace endif include_diagnostics_extensionsdir = $(includedir)/diagnostics/extensions diagnostics-0.3.3/diagnostics/extensions/Makefile.in0000644000076500000240000005131311567506171017532 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/model.am @STACKTRACE_TRUE@am__append_1 = stacktrace subdir = diagnostics/extensions ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = instrumentation memory stacktrace DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = instrumentation memory $(am__append_1) include_diagnostics_extensionsdir = $(includedir)/diagnostics/extensions all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/extensions/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/extensions/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/extensions/memory/0000755000076500000240000000000011567507567017064 500000000000000diagnostics-0.3.3/diagnostics/extensions/memory/allocation_database.cpp0000644000076500000240000002050011172433104023427 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; MEMORY_NAMESAPCE_BEGIN; using ::diagnostics::internal::to_string; using ::diagnostics::internal::Logging_Implementation; #define MEMORY_LOG(TYPE,STR_WHAT) Logging_Implementation::instance()->log(LEVEL_AUDIT,TYPE,0,STR_WHAT,"","",0) #define MEMORY_LOG_SYS(TYPE,STR_WHAT) Logging_Implementation::instance()->log(LEVEL_SYSTEM,TYPE,0,STR_WHAT,"","",0) class Allocation_Database_Implementation { //typedef ::diagnostics::memory::internal::Malloc_Allocator Allocator_t; typedef ::diagnostics::memory::internal::Malloc_Allocator< ::std::pair > Allocator_t; typedef ::std::map, Allocator_t> Allocations_t; typedef Allocation_Database_Implementation Self; int m_log_nesting; static int m_check_nesting; Tick_t m_creation_tick; Allocations_t m_allocations; ::std::size_t m_size; private: friend class Allocation_Database; Allocation_Database_Implementation() : m_log_nesting(0), m_creation_tick(0), m_allocations(), m_size(0) { Logging_Implementation::instance()->log(LEVEL_SYSTEM,TYPE_TRACE,0,"MEM: Allocation_Database initialized","","",0); } static Self * m_instance; public: static inline Allocation_Database_Implementation* instance() { if(m_instance==NULL) m_instance=new Self; return m_instance; } inline void register_allocation(void * const p, ::std::size_t const len) { m_allocations[p]=Allocation_Record(len,++m_creation_tick); m_size+=len; if(m_log_nesting!=0) MEMORY_LOG(TYPE_TRACE, "MEMORY: Allocation: " "address=" + to_string(p) + " size=" + to_string(len) + " tick=" + to_string(m_creation_tick)); } inline bool register_deallocation(void * const p) { Allocations_t::iterator const pos(m_allocations.find(p)); if(pos==m_allocations.end()) { MEMORY_LOG(TYPE_FAILED_ASSERTION, "MEMORY: Unknown_Block_Deallocation: " "address=" + to_string(p)); return false; } // we know the block m_size-=pos->second.m_len; if(m_log_nesting!=0) MEMORY_LOG(TYPE_TRACE,"MEMORY: Deallocation: " "address=" + to_string(p) + " size=" + to_string(pos->second.m_len) + " tick=" + to_string(pos->second.m_creation_tick)); m_allocations.erase(pos); return true; } inline void balance(::std::size_t & size, Tick_t & number) { size=m_size; number=m_allocations.size(); } inline void balance(Tick_t const start_from, ::std::size_t & size, Tick_t & number) { size=0; number=0; Allocations_t::const_iterator begin(m_allocations.begin()); Allocations_t::const_iterator const end(m_allocations.end()); for(;begin!=end;++begin) { if(start_from<=begin->second.m_creation_tick) { ++number; size+=begin->second.m_len; } } } inline Tick_t * unallocated_blocks(Tick_t const start_from,Tick_t * b, Tick_t * const e) { Allocations_t::const_iterator begin(m_allocations.begin()); Allocations_t::const_iterator const end(m_allocations.end()); for(;begin!=end;++begin) { if(start_from<=begin->second.m_creation_tick) { *b=begin->second.m_creation_tick; ++b; if(b==e) return b; } } return b; } inline void reset() { MEMORY_LOG(TYPE_TRACE, "MEMORY: Reset:" " tick="+to_string(m_creation_tick) +" number="+to_string(m_allocations.size()) +" size="+to_string(m_size)); m_allocations=Allocations_t(); m_creation_tick=0; m_size=0; } inline void analysis_on(bool const logging) { ++m_check_nesting; if(logging) ++m_log_nesting; } inline void analysis_off(bool const logging) { --m_check_nesting; // we reset the database if no checking/logging is going on if(m_check_nesting==0) reset(); if(logging) --m_log_nesting; } inline Tick_t creation_tick() { return m_creation_tick; } }; Allocation_Database_Implementation* Allocation_Database_Implementation::m_instance=NULL; int Allocation_Database_Implementation::m_check_nesting=0; //////////////////////////////////////////////////////////////////////////////// void Allocation_Database::register_allocation(void* const p, ::std::size_t const len) { // this check MUST come before doing the guard: // the guard might allocate its mutex -- and thus we had an // endless loop. // // This is NOT TOTALLY thread safe: m_check_nesting can only be // changed while being in the critical section -- but it could // change after this check. However, if a memory anlysis depends // on a race condition, it is unusable anyhow. if(Allocation_Database_Implementation::m_check_nesting==0) return; DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); if(DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(lock_guard)) return; Allocation_Database_Implementation::instance()->register_allocation(p,len); } bool Allocation_Database::register_deallocation(void* const p) { // see above if(Allocation_Database_Implementation::m_check_nesting==0) return true; DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); if(DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(lock_guard)) return true; return Allocation_Database_Implementation::instance()->register_deallocation(p); } void Allocation_Database::balance(Tick_t const start_from, ::std::size_t & size, Tick_t & number) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); Allocation_Database_Implementation::instance()->balance(start_from,size,number); } Tick_t * Allocation_Database::unallocated_blocks(Tick_t const start_from, Tick_t * const b, Tick_t * const e) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); return Allocation_Database_Implementation::instance()->unallocated_blocks(start_from,b,e); } void Allocation_Database::balance(::std::size_t & size, Tick_t & number) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); Allocation_Database_Implementation::instance()->balance(size,number); } void Allocation_Database::reset() { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); Allocation_Database_Implementation::instance()->reset(); } void Allocation_Database::analysis_on(bool const logging) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); Allocation_Database_Implementation::instance()->analysis_on(logging); } void Allocation_Database::analysis_off(bool const logging) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); Allocation_Database_Implementation::instance()->analysis_off(logging); } Tick_t Allocation_Database::creation_tick() { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); return Allocation_Database_Implementation::instance()->creation_tick(); } MEMORY_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/allocation_database.hpp0000644000076500000240000000752611172433104023451 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__ALLOCATION_DATABASE__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__ALLOCATION_DATABASE__INCLUDE_GUARD // used by value in the interface #include DIAGNOSTICS_NAMESPACE_BEGIN; MEMORY_NAMESAPCE_BEGIN; class Allocation_Database { public: /** * @brief register an allocation-call */ static void register_allocation(void* const p, ::std::size_t const len); /** * @brief register a deallocation-call. Returns true if the block * should be deallocated. At the moment, it returns false, if it * does not know the block, thus it could be a double-deallocation. */ static bool register_deallocation(void* const p); /** * @brief reset the complete database */ static void reset(); /** * @brief switch on analysis -- the register calls are ignored * until the analysis is switched on. Afterwards, all calls are * registered. * * @attention When using multiple threads: If other threads are * working in the meantime, some allocation will, some other will * not be registered. THUS, LET ALL OTHER THREADS WAIT WHILE * SWITCHING ON/OFF THE ANALYSIS. * * @a logging indicates whether the allocations/deallocations * should be reflected in the log. Multiple calls to analysis_on * are allowed, a corresponding counter is increased. */ static void analysis_on(bool const logging); /** * @brief switch off analysis -- the converse to analysis_on. The * calls must be symetric to analysis_on. * * @attention be aware of problems with multi-threading! see * @ref analysis_on */ static void analysis_off(bool const logging); /** * @brief each registered allocation is associated with a * creation_tick. This methods return the current creation_tick * which allows to filter the database on currently allocated * blocks. */ static Tick_t creation_tick(); /** * @brief sets @a size to the number of bytes allocated after the * creation_tick @a start_from. @a number is corresponding number * of blocks. */ static void balance(Tick_t const start_from, ::std::size_t & size, Tick_t & number); /** * @brief sets @a size to the total number of bytes allocated * (precisely: returns the sum over all registered blocks). @a * number is corresponding number of blocks. */ static void balance(::std::size_t & size, Tick_t & number); static Tick_t* unallocated_blocks(Tick_t const start_from, Tick_t * const b, Tick_t * const e); }; MEMORY_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/allocation_record.hpp0000644000076500000240000000410511172433104023151 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__ALLOCATION_RECORD__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__ALLOCATION_RECORD__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; MEMORY_NAMESAPCE_BEGIN; class Allocation_Record { typedef Allocation_Record Self; public: inline Allocation_Record() : m_len(0), m_creation_tick(0) { } inline Allocation_Record(::std::size_t const len,Tick_t const creation_tick) : m_len(len), m_creation_tick(creation_tick) { } inline Allocation_Record(Self const & other) : m_len(other.m_len), m_creation_tick(other.m_creation_tick) { } inline Self & operator=(Self const & other) { m_len=other.m_len; m_creation_tick=other.m_creation_tick; return *this; } ::std::size_t m_len; Tick_t m_creation_tick; }; MEMORY_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/annotations.cpp0000644000076500000240000001350211172433104022017 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include #if DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED == 1 # include # include # include # include # include using ::diagnostics::internal::to_string; using ::diagnostics::internal::Logging_Implementation; UNNAMED_NAMESPACE_BEGIN; char const * block_name(bool const log,bool const check) { if(log) return "MEMORY: Logging"; else if(check) return "MEMORY: Balance"; else return "MEMORY: Analysis"; } UNNAMED_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_BEGIN; MEMORY_NAMESAPCE_BEGIN; INTERNAL_NAMESPACE_BEGIN; Allocation_Balance_Guard::Allocation_Balance_Guard (char const * const base_file_name, char const * const file_name, Level_t const level, int const line, bool const log, bool const check, Type_t const type) : m_base_file_name(base_file_name), m_file_name(file_name), m_line(line), m_level(level), m_log(log), m_check(check), m_type(type), m_creation_tick(Allocation_Database::creation_tick()+1) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); // obtain current balance Allocation_Database::balance(m_entering_total_size,m_entering_total_number); // log the block entry Logging_Implementation::instance()->log (::diagnostics::LEVEL_AUDIT, TYPE_BLOCK_ENTER, 0, block_name(log,check), m_base_file_name, m_file_name, line); // activate @ref Allocation_Database (log==true -> all changes are logged) Allocation_Database::analysis_on(log); } Allocation_Balance_Guard::~Allocation_Balance_Guard() { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); if(m_check) assert_balance(m_line,m_type); Allocation_Database::analysis_off(m_log); // log the block exit Logging_Implementation::instance()->log (::diagnostics::LEVEL_AUDIT, TYPE_BLOCK_EXIT, 0, block_name(m_log,m_check), m_base_file_name, m_file_name, m_line); } void Allocation_Balance_Guard::assert_balance(int const line,Type_t const type) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); ::std::size_t size; Tick_t number; Allocation_Database::balance(m_creation_tick,size,number); if(number>0) { Logging_Implementation::instance()->log (m_level, type, 0, "MEMORY: Leak: bytes="+ to_string(size) + " blocks=" + to_string(number), m_base_file_name, m_file_name, line); Tick_t ticks[128]; Tick_t * ticks_begin(ticks); Tick_t * const ticks_end(Allocation_Database::unallocated_blocks(m_creation_tick,ticks,ticks+128)); ::std::sort(ticks_begin,ticks_end); ::std::string tick_report("MEMORY: Leak: ticks="); for(;ticks_begin!=ticks_end;++ticks_begin){ tick_report+=' '; tick_report+=to_string(*ticks_begin); } Logging_Implementation::instance()->log (m_level, type, 0, tick_report, m_base_file_name, m_file_name, line); } ::std::size_t total_size; Tick_t total_number; Allocation_Database::balance(total_size,total_number); // compensating for leak total_size-=size; total_number-=number; // total_number<=m_number_blocks (we do not assert -- but if this // condition is not met something wired happened (probably, // multi-threading)). if(total_number!=m_entering_total_number) { Logging_Implementation::instance()->log (m_level, type, 0, "MEMORY: Antileak: bytes=" + to_string(m_entering_total_size-total_size) + " blocks=" + to_string(m_entering_total_number-total_number), m_base_file_name, m_file_name, line); } } void Allocation_Balance_Guard::log_balance(int const line) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); ::std::size_t size; Tick_t number; Allocation_Database::balance(m_creation_tick,size,number); Logging_Implementation::instance()->log (m_level, TYPE_TRACE, 0, "MEMORY: Balance: bytes=" + to_string(size) + " blocks=" + to_string(number), m_base_file_name, m_file_name, line);} void Allocation_Balance_Guard::log_total_balance(int const line) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); ::std::size_t size; Tick_t number; Allocation_Database::balance(size,number); Logging_Implementation::instance()->log (m_level, TYPE_TRACE, 0, "MEMORY: Total_Balance: bytes=" + to_string(size) + " blocks=" + to_string(number), m_base_file_name, m_file_name, m_line); } INTERNAL_NAMESPACE_END; MEMORY_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/annotations.hpp0000644000076500000240000001513511172433104022030 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__ANNOTATIONS__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__ANNOTATIONS__INCLUDE_GUARD #include #if DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED == 0 # define DIAGNOSTICS_MEMORY_BASE_BALANCE_ENTER(LEVEL,LOG,CHECK) do { ((void)0) # define DIAGNOSTICS_MEMORY_BASE_BALANCE_EXIT } while(false) # define DIAGNOSTICS_MEMORY_BASE_LOG_BALANCE ((void)0) # define DIAGNOSTICS_MEMORY_BASE_ASSERT_BALANCE ((void)0) # define DIAGNOSTICS_MEMORY_BASE_LOG_TOTAL_BALANCE ((void)0) #else # include # include # include # include # include DIAGNOSTICS_NAMESPACE_BEGIN; MEMORY_NAMESAPCE_BEGIN; INTERNAL_NAMESPACE_BEGIN; class Allocation_Balance_Guard { private: typedef Allocation_Balance_Guard Self; Allocation_Balance_Guard(Self const & other); Self & operator=(Self const & other); public: Allocation_Balance_Guard(char const * const base_file_name, char const * const file_name, Level_t const level, int const line, bool const log, bool const check, Type_t const type); ~Allocation_Balance_Guard(); void assert_balance (int const line,Type_t const type); void log_balance (int const line); void log_total_balance(int const line); private: char const * const m_base_file_name; char const * const m_file_name; int const m_line; Level_t const m_level; bool const m_log; bool const m_check; Type_t const m_type; Tick_t const m_creation_tick; Tick_t m_entering_total_number; ::std::size_t m_entering_total_size; }; INTERNAL_NAMESPACE_END; MEMORY_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; # define DIAGNOSTICS_MEMORY_BASE_BALANCE_ENTER(LEVEL,LOG,CHECK,TYPE) \ do { ::DIAGNOSTICS_NAMESPACE::MEMORY_NAMESAPCE::INTERNAL_NAMESPACE::Allocation_Balance_Guard \ diagnostics_internal_memory_guard(DIAGNOSTICS_BASE_FILE, __FILE__, LEVEL, __LINE__, LOG, CHECK,TYPE); { ((void)0) # define DIAGNOSTICS_MEMORY_BASE_BALANCE_EXIT } } while(false) # define DIAGNOSTICS_MEMORY_BASE_LOG_BALANCE diagnostics_internal_memory_guard.log_balance(__LINE__) # define DIAGNOSTICS_MEMORY_BASE_ASSERT_BALANCE diagnostics_internal_memory_guard.assert_balance(__LINE__, TYPE_TRACE) # define DIAGNOSTICS_MEMORY_BASE_LOG_TOTAL_BALANCE diagnostics_internal_memory_guard.log_total_balance(__LINE__) #endif /** * @brief This macro starts a block which turns on memory analysis -- * but without logging memory allocation/deallocation and without * checking whether the allocations/deallocations are balanced, i.e., * all allocations/deallocations are registered in the internal * allocation-database. Consequently, double-deallocations are * detected (in terms of unknown block deallocation) and a complete * allocation-database is maintained which avoids @ref * TYPE_FAILED_ASSERTION for blocks which have been allocated before * using @ref TEST_MEMORY_BALANCE_ENTER or a @ref * TEST_MEMORY_LOG_ENTER macro. */ #define TEST_MEMORY_ANALYSIS_ENTER \ DIAGNOSTICS_MEMORY_BASE_BALANCE_ENTER(::diagnostics::LEVEL_TEST,false,false, ::diagnostics::TYPE_TRACE) #define TEST_MEMORY_ANALYSIS_EXIT DIAGNOSTICS_MEMORY_BASE_BALANCE_EXIT /** * @brief This macro checks whether @arg all chunks of which are * allocated inside of the framed block are deallocated again @arg and * no other blocks are deallocated inside of the framed block, i.e., a * block framed by these two macros must be completely neutral with * respect to memory consumption. * * If this is not the case, a corresponding message is written to the * log: Either a Leak (not freeing memory) or an Antileak (freeing too * much memory) is reported. These messages come with type @param TYPE * -- usually it is set to @ref ::diagnostics::TYPE_FAILED_ASSERTION * or @ref ::diagnostics::TYPE_TRACE. * */ #define TEST_MEMORY_BALANCE_ENTER(TYPE) \ DIAGNOSTICS_MEMORY_BASE_BALANCE_ENTER(::diagnostics::LEVEL_TEST,false,true, (TYPE)) #define TEST_MEMORY_BALANCE_EXIT DIAGNOSTICS_MEMORY_BASE_BALANCE_EXIT /** * @brief This macro starts a block which switches on memory logging * -- all allocations and deallocations are logged (LEVEL_AUDIT). */ #define TEST_MEMORY_LOG_ENTER \ DIAGNOSTICS_MEMORY_BASE_BALANCE_ENTER(::diagnostics::LEVEL_TEST,true,false, ::diagnostics::TYPE_TRACE) #define TEST_MEMORY_LOG_EXIT DIAGNOSTICS_MEMORY_BASE_BALANCE_EXIT /** * @brief Logs the number of blocks and the summed size of the * currently allocated memory (LEVEL_TEST) with respect to next @ref * TEST_MEMORY_LOG_ENTER or @ref TEST_MEMORY_BALANCE_ENTER context. */ #define TEST_MEMORY_LOG_BALANCE DIAGNOSTICS_MEMORY_BASE_LOG_BALANCE /** * @brief Asserts (LEVEL_TEST) that the currently allocation status is * balanced with respect to next @ref TEST_MEMORY_LOG_ENTER or @ref * TEST_MEMORY_BALANCE_ENTER context. It is also asserted that no * blocks which had not been allocated within this context have been * deallocated. */ #define TEST_MEMORY_ASSERT_BALANCE DIAGNOSTICS_MEMORY_BASE_ASSERT_BALANCE /** * @brief Logs the number of blocks and the summed size of the * currently allocated memory (LEVEL_TEST) with respect to outer-most * @ref TEST_MEMORY_LOG_ENTER, @ref TEST_MEMORY_BALANCE_ENTER or @ref * TEST_MEMORY_ANALYSIS_ENTER context. */ #define TEST_MEMORY_LOG_TOTAL_BALANCE DIAGNOSTICS_MEMORY_BASE_LOG_TOTAL_BALANCE #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/dummy.ts.cpp0000644000076500000240000000223111172433104021237 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/Makefile.am0000644000076500000240000000167111147120332021014 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libmemory.la libmemory_la_SOURCES = allocation_database.cpp annotations.cpp pkginclude_HEADERS = allocation_database.hpp allocation_record.hpp annotations.hpp malloc_allocator.hpp names.hpp namespace.hpp operators.hpp tick.hpp include_diagnostics_extensions_memorydir = $(includedir)/diagnostics/extensions/memory include_diagnostics_extensions_memory_HEADERS = allocation_database.hpp allocation_record.hpp annotations.hpp malloc_allocator.hpp names.hpp namespace.hpp operators.hpp tick.hpp noinst_LTLIBRARIES += libdummy_ts.la libdummy_ts_la_SOURCES = dummy.ts.cpp diagnostics-0.3.3/diagnostics/extensions/memory/Makefile.in0000644000076500000240000007004411567506171021044 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_extensions_memory_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am subdir = diagnostics/extensions/memory ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libdummy_ts_la_LIBADD = am_libdummy_ts_la_OBJECTS = dummy.ts.lo libdummy_ts_la_OBJECTS = $(am_libdummy_ts_la_OBJECTS) libmemory_la_LIBADD = am_libmemory_la_OBJECTS = allocation_database.lo annotations.lo libmemory_la_OBJECTS = $(am_libmemory_la_OBJECTS) DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libdummy_ts_la_SOURCES) $(libmemory_la_SOURCES) DIST_SOURCES = $(libdummy_ts_la_SOURCES) $(libmemory_la_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = \ "$(DESTDIR)$(include_diagnostics_extensions_memorydir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_extensions_memory_HEADERS) \ $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libmemory.la libdummy_ts.la libmemory_la_SOURCES = allocation_database.cpp annotations.cpp pkginclude_HEADERS = allocation_database.hpp allocation_record.hpp annotations.hpp malloc_allocator.hpp names.hpp namespace.hpp operators.hpp tick.hpp include_diagnostics_extensions_memorydir = $(includedir)/diagnostics/extensions/memory include_diagnostics_extensions_memory_HEADERS = allocation_database.hpp allocation_record.hpp annotations.hpp malloc_allocator.hpp names.hpp namespace.hpp operators.hpp tick.hpp libdummy_ts_la_SOURCES = dummy.ts.cpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/extensions/memory/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/extensions/memory/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libdummy_ts.la: $(libdummy_ts_la_OBJECTS) $(libdummy_ts_la_DEPENDENCIES) $(CXXLINK) $(libdummy_ts_la_OBJECTS) $(libdummy_ts_la_LIBADD) $(LIBS) libmemory.la: $(libmemory_la_OBJECTS) $(libmemory_la_DEPENDENCIES) $(CXXLINK) $(libmemory_la_OBJECTS) $(libmemory_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/allocation_database.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/annotations.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy.ts.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_extensions_memoryHEADERS: $(include_diagnostics_extensions_memory_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_extensions_memorydir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_extensions_memorydir)" @list='$(include_diagnostics_extensions_memory_HEADERS)'; test -n "$(include_diagnostics_extensions_memorydir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_extensions_memorydir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_extensions_memorydir)" || exit $$?; \ done uninstall-include_diagnostics_extensions_memoryHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_extensions_memory_HEADERS)'; test -n "$(include_diagnostics_extensions_memorydir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_extensions_memorydir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_extensions_memorydir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_extensions_memorydir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnostics_extensions_memoryHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_extensions_memoryHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am \ install-include_diagnostics_extensions_memoryHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgincludeHEADERS install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_extensions_memoryHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/extensions/memory/malloc_allocator.hpp0000644000076500000240000000755711172433104023013 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__MALLOC_ALLOCATOR__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__MALLOC_ALLOCATOR__INCLUDE_GUARD #include // malloc/free #include // ::std::allocator #include // ::std::numeric_limits #include DIAGNOSTICS_NAMESPACE_BEGIN; MEMORY_NAMESAPCE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @class Malloc_Allocator * * @brief It is a straight forward STL allocator which uses internally * malloc/free for its memory management. We use this allocator to be * independent from new/delete allocations -- and more importantly: we * must be independent of STL internal pooling and mutexing. * * As an example of the problems, that could occur: * * @arg STL container locks the global memory pool. * @arg STL container requires memory beyond the available pool size * @arg .. pool calls new * @arg .. .. Allocation_Database_Implementation has to register the allocation * @arg .. .. .. its underlying STL container have to allocate memory * @arg .. .. .. .. attempts to _lock_ the global memory pool (DEADLOCK) * * Thus we use this alloctor for internal containers. * * @nosubgrouping */ template class Malloc_Allocator { public: typedef T value_type; typedef value_type* pointer; typedef const value_type* const_pointer; typedef value_type& reference; typedef const value_type& const_reference; typedef ::std::size_t size_type; typedef ::std::ptrdiff_t difference_type; private: typedef typename ::std::allocator::const_pointer const_void_pointer; public : template struct rebind { typedef Malloc_Allocator other;}; public : inline Malloc_Allocator() {} inline ~Malloc_Allocator() {} inline Malloc_Allocator(Malloc_Allocator const&) {} template inline Malloc_Allocator(Malloc_Allocator const&) {} inline pointer address(reference r) { return &r; } inline const_pointer address(const_reference r) { return &r; } inline pointer allocate(size_type cnt, const_void_pointer = 0) { return reinterpret_cast(::std::malloc(cnt * sizeof (T))); } inline void deallocate(pointer p, size_type) { ::std::free(p); } inline size_type max_size() const { return ::std::numeric_limits::max() / sizeof(T); } inline void construct(pointer p, const T& t) { new(p) T(t); } inline void destroy(pointer p) { p->~T(); } inline bool operator==(Malloc_Allocator const&) { return true; } inline bool operator!=(Malloc_Allocator const& a) { return !operator==(a); } }; INTERNAL_NAMESPACE_END; MEMORY_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/names.hpp0000644000076500000240000000267311172433104020601 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__NAMES__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__NAMES__INCLUDE_GUARD #define DIAGNOSTICS_EXTENSIONS_MEMORY_ALLOCATION_NAME "[MEMORY] Allocation" #define DIAGNOSTICS_EXTENSIONS_MEMORY_DEALLOCATION_NAME "[MEMORY] Deallocation" #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/namespace.hpp0000644000076500000240000000377611172433104021437 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__NAMESPACE_INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__NAMESPACE_INCLUDE_GUARD #ifndef MEMORY_NAMESAPCE # define MEMORY_NAMESAPCE memory # define MEMORY_NAMESAPCE_BEGIN namespace MEMORY_NAMESAPCE { void dummy_for_semicolon_do_not_use() # define MEMORY_NAMESAPCE_END } void dummy_for_semicolon_do_not_use() #endif #ifndef INTERNAL_NAMESAPCE # define INTERNAL_NAMESAPCE internal # define INTERNAL_NAMESAPCE_BEGIN namespace INTERNAL_NAMESAPCE { void dummy_for_semicolon_do_not_use() # define INTERNAL_NAMESAPCE_END } void dummy_for_semicolon_do_not_use() #endif #ifndef UNNAMED_NAMESAPCE # define UNNAMED_NAMESAPCE # define UNNAMED_NAMESAPCE_BEGIN namespace UNNAMED_NAMESAPCE { void dummy_for_semicolon_do_not_use() # define UNNAMED_NAMESAPCE_END } void dummy_for_semicolon_do_not_use() #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/operators.hpp0000644000076500000240000000513211172433104021505 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__OPERATORS__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__OPERATORS__INCLUDE_GUARD #include #if DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED == 1 #include #include void* operator new(::std::size_t const len) throw(::std::bad_alloc) { void* const result(malloc(len)); ::diagnostics::memory::Allocation_Database::register_allocation(result,len); return result; } void operator delete(void * const p,::std::size_t const len) { if(p==NULL) return; if(::diagnostics::memory::Allocation_Database::register_deallocation(p)) free(p); } void operator delete(void * const p) throw() { if(p==NULL) return; ::diagnostics::memory::Allocation_Database::register_deallocation(p); free(p); } void* operator new[](::std::size_t const len) throw(::std::bad_alloc) { void* const result(malloc(len)); ::diagnostics::memory::Allocation_Database::register_allocation(result,len); return result; } void operator delete[](void * const p,::std::size_t const len) { if(p==NULL) return; ::diagnostics::memory::Allocation_Database::register_deallocation(p); free(p); } void operator delete[](void * const p) throw() { if(p==NULL) return; ::diagnostics::memory::Allocation_Database::register_deallocation(p); free(p); } #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/memory/tick.hpp0000644000076500000240000000303111172433104020415 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__MEMORY__TICK_INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__MEMORY__TICK_INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; MEMORY_NAMESAPCE_BEGIN; typedef ::std::size_t Tick_t; MEMORY_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/stacktrace/0000755000076500000240000000000011567507567017700 500000000000000diagnostics-0.3.3/diagnostics/extensions/stacktrace/descriptor.hpp0000644000076500000240000000511411335533015022464 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2009, 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__DESCRIPTOR__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__DESCRIPTOR__INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace POSIX { class Descriptor { int desc; Descriptor(const Descriptor&); void operator=(const Descriptor&); public: Descriptor() : desc(-1) { } Descriptor(int d) : desc(d) { } ~Descriptor() throw () { CloseNoThrow(); } bool IsOpen() const { return desc >= 0; } int GetRaw() const { return desc; } int Release() { int d = desc; desc = -1; return d; } void OpenReadOnly(const char *); //void OpenReadOnly(const Descriptor &dir, const char *); // uses openat void swap(Descriptor& o) { int d = o.desc; o.desc = desc; desc = d; } void Reset(int d) { Close(); desc = d; } void Close(); void CloseNoThrow() throw (); size_t read(void *, size_t); void SetCloseOnExec(bool); void SetNonBlocking(bool); }; class Pipe { Descriptor read, write; public: Pipe(); ~Pipe(); Descriptor& Read() { return read; } Descriptor& Write() { return write; } }; } // Enyo::POSIX STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/error.hpp0000644000076500000240000000415411335247113021443 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2009, 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__ERROR__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__ERROR__INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace POSIX { class Error : public std::runtime_error { public: Error(); // use global errno variable Error(int code); virtual ~Error() throw (); int Code() const { return code; } // Throws error if false, using the global errno value. static void Unless(bool flag) { if (!flag) { Throw(); } } virtual char const * name() const { return "POSIX::Error"; } private: int code; static void Throw() __attribute__((noreturn)); }; // Similar to strerror. std::string ErrorString(int code); } // Enyo::POSIX STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/frame_visitor.hpp0000644000076500000240000000566411335237775023207 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__FRAME_VISITOR__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__FRAME_VISITOR__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace Traceback { struct FrameVisitor { virtual ~FrameVisitor(); // Called by Walk for each stack frame. Unwinding continues while // this functions returns true. ORIGINAL is the original address in // the running executable. EXECUTABLE is the name of the DSO (0 for // the main program). RELATIVE is the relative address in the // executable, derived from ORIGINAL; 0 on failure. virtual bool Frame(void *original, const char *executable, void *relative) = 0; // Walk the stack, calling Frame. void Walk(); // Invokes Frame after resolving the address. For internal use // only. bool frame(void *original); }; // Visitor to map relative addresses to source file information. // This class is not thread-safe because it spawns helper programs // internally. struct SourceVisitor { virtual ~SourceVisitor(); // Invoked with the resolved addresses. Calls Frame with all the // corresponding stack frames. For a single address, multiple // frames may be available due to inlining. Returns true if at // least one frame was found. bool WalkSource(const char *dso, void *reltaive); // Called by WalkSource. FUNCTION is the name of the function, FILE // is the name of the source file, and LINE is the line number in // the source file. virtual void Frame(const char *function, const char *file, unsigned line) = 0; }; } // Enyo::Traceback STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/handler.hpp0000644000076500000240000000337611335240407021733 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__HANDLER__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__HANDLER__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace Traceback { // std::terminate handler with an annotated traceback. void TerminateHandler(); // Installs TerminateHandler as the std::terminate handler. void InstallHandler(); } // Enyo::Traceback STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/Makefile.am0000644000076500000240000000315411377500567021647 00000000000000# This Makefile.am is maintained by config/update-makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # the tests will only work reliably if optimization is set to -O1 AM_CXXFLAGS := ${CXXFLAGS} override CXXFLAGS = AM_CXXFLAGS ?= @CXXFLAGS@ stacktrace_CXXFLAGS = -g -O1 # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libstacktrace.la libstacktrace_la_SOURCES = posix.cpp posix_descriptor.cpp posix_error.cpp posix_error_string.cpp posix_pipe.cpp posix_process.cpp traceback_addr2line.cpp traceback_handler.cpp traceback_resolve.cpp traceback_walk.cpp include_diagnostics_extensions_stacktracedir = $(includedir)/diagnostics/extensions/stacktrace include_diagnostics_extensions_stacktrace_HEADERS = descriptor.hpp error.hpp frame_visitor.hpp handler.hpp namespace.hpp posix.hpp process.hpp raw_process.hpp signal.hpp check_PROGRAMS = stacktrace use_case TESTS = stacktrace use_case XFAIL_TESTS = use_case stacktrace_SOURCES = stacktrace.t.cpp # add additional objects required to build stacktrace here, like # stacktrace_LDADD = ../base/libbase.la libbla.la stacktrace_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../../unittest/test_system/libtest_system_ts.la ../../util/libutil_ts.la use_case_SOURCES = use_case.t.cpp # add additional objects required to build use_case here, like # use_case_LDADD = ../base/libbase.la libbla.la use_case_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la diagnostics-0.3.3/diagnostics/extensions/stacktrace/Makefile.in0000644000076500000240000010462611567506171021664 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_extensions_stacktrace_HEADERS) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/model.am check_PROGRAMS = stacktrace$(EXEEXT) use_case$(EXEEXT) TESTS = stacktrace$(EXEEXT) use_case$(EXEEXT) XFAIL_TESTS = use_case$(EXEEXT) subdir = diagnostics/extensions/stacktrace ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libstacktrace_la_LIBADD = am_libstacktrace_la_OBJECTS = posix.lo posix_descriptor.lo \ posix_error.lo posix_error_string.lo posix_pipe.lo \ posix_process.lo traceback_addr2line.lo traceback_handler.lo \ traceback_resolve.lo traceback_walk.lo libstacktrace_la_OBJECTS = $(am_libstacktrace_la_OBJECTS) am_stacktrace_OBJECTS = stacktrace-stacktrace.t.$(OBJEXT) stacktrace_OBJECTS = $(am_stacktrace_OBJECTS) stacktrace_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../../unittest/test_system/libtest_system_ts.la \ ../../util/libutil_ts.la stacktrace_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(stacktrace_CXXFLAGS) \ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ am_use_case_OBJECTS = use_case.t.$(OBJEXT) use_case_OBJECTS = $(am_use_case_OBJECTS) use_case_DEPENDENCIES = $(top_builddir)/diagnostics/libdiagnostics.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libstacktrace_la_SOURCES) $(stacktrace_SOURCES) \ $(use_case_SOURCES) DIST_SOURCES = $(libstacktrace_la_SOURCES) $(stacktrace_SOURCES) \ $(use_case_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_extensions_stacktracedir)" HEADERS = $(include_diagnostics_extensions_stacktrace_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update-makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # the tests will only work reliably if optimization is set to -O1 AM_CXXFLAGS := ${CXXFLAGS} stacktrace_CXXFLAGS = -g -O1 # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libstacktrace.la libstacktrace_la_SOURCES = posix.cpp posix_descriptor.cpp posix_error.cpp posix_error_string.cpp posix_pipe.cpp posix_process.cpp traceback_addr2line.cpp traceback_handler.cpp traceback_resolve.cpp traceback_walk.cpp include_diagnostics_extensions_stacktracedir = $(includedir)/diagnostics/extensions/stacktrace include_diagnostics_extensions_stacktrace_HEADERS = descriptor.hpp error.hpp frame_visitor.hpp handler.hpp namespace.hpp posix.hpp process.hpp raw_process.hpp signal.hpp stacktrace_SOURCES = stacktrace.t.cpp # add additional objects required to build stacktrace here, like # stacktrace_LDADD = ../base/libbase.la libbla.la stacktrace_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../../unittest/test_system/libtest_system_ts.la ../../util/libutil_ts.la use_case_SOURCES = use_case.t.cpp # add additional objects required to build use_case here, like # use_case_LDADD = ../base/libbase.la libbla.la use_case_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/extensions/stacktrace/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/extensions/stacktrace/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libstacktrace.la: $(libstacktrace_la_OBJECTS) $(libstacktrace_la_DEPENDENCIES) $(CXXLINK) $(libstacktrace_la_OBJECTS) $(libstacktrace_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list stacktrace$(EXEEXT): $(stacktrace_OBJECTS) $(stacktrace_DEPENDENCIES) @rm -f stacktrace$(EXEEXT) $(stacktrace_LINK) $(stacktrace_OBJECTS) $(stacktrace_LDADD) $(LIBS) use_case$(EXEEXT): $(use_case_OBJECTS) $(use_case_DEPENDENCIES) @rm -f use_case$(EXEEXT) $(CXXLINK) $(use_case_OBJECTS) $(use_case_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posix.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posix_descriptor.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posix_error.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posix_error_string.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posix_pipe.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posix_process.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stacktrace-stacktrace.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/traceback_addr2line.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/traceback_handler.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/traceback_resolve.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/traceback_walk.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/use_case.t.Po@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< stacktrace-stacktrace.t.o: stacktrace.t.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_CXXFLAGS) $(CXXFLAGS) -MT stacktrace-stacktrace.t.o -MD -MP -MF $(DEPDIR)/stacktrace-stacktrace.t.Tpo -c -o stacktrace-stacktrace.t.o `test -f 'stacktrace.t.cpp' || echo '$(srcdir)/'`stacktrace.t.cpp @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/stacktrace-stacktrace.t.Tpo $(DEPDIR)/stacktrace-stacktrace.t.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='stacktrace.t.cpp' object='stacktrace-stacktrace.t.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_CXXFLAGS) $(CXXFLAGS) -c -o stacktrace-stacktrace.t.o `test -f 'stacktrace.t.cpp' || echo '$(srcdir)/'`stacktrace.t.cpp stacktrace-stacktrace.t.obj: stacktrace.t.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_CXXFLAGS) $(CXXFLAGS) -MT stacktrace-stacktrace.t.obj -MD -MP -MF $(DEPDIR)/stacktrace-stacktrace.t.Tpo -c -o stacktrace-stacktrace.t.obj `if test -f 'stacktrace.t.cpp'; then $(CYGPATH_W) 'stacktrace.t.cpp'; else $(CYGPATH_W) '$(srcdir)/stacktrace.t.cpp'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/stacktrace-stacktrace.t.Tpo $(DEPDIR)/stacktrace-stacktrace.t.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='stacktrace.t.cpp' object='stacktrace-stacktrace.t.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_CXXFLAGS) $(CXXFLAGS) -c -o stacktrace-stacktrace.t.obj `if test -f 'stacktrace.t.cpp'; then $(CYGPATH_W) 'stacktrace.t.cpp'; else $(CYGPATH_W) '$(srcdir)/stacktrace.t.cpp'; fi` mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_extensions_stacktraceHEADERS: $(include_diagnostics_extensions_stacktrace_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_extensions_stacktracedir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_extensions_stacktracedir)" @list='$(include_diagnostics_extensions_stacktrace_HEADERS)'; test -n "$(include_diagnostics_extensions_stacktracedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_extensions_stacktracedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_extensions_stacktracedir)" || exit $$?; \ done uninstall-include_diagnostics_extensions_stacktraceHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_extensions_stacktrace_HEADERS)'; test -n "$(include_diagnostics_extensions_stacktracedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_extensions_stacktracedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_extensions_stacktracedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_extensions_stacktracedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: \ install-include_diagnostics_extensions_stacktraceHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: \ uninstall-include_diagnostics_extensions_stacktraceHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am \ install-include_diagnostics_extensions_stacktraceHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_extensions_stacktraceHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` override CXXFLAGS = AM_CXXFLAGS ?= @CXXFLAGS@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/extensions/stacktrace/namespace.hpp0000644000076500000240000000346311335246046022254 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009,2010 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__NAMESPACE_INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__NAMESPACE_INCLUDE_GUARD #ifndef STACKTRACE_NAMESAPCE # define STACKTRACE_NAMESAPCE stacktrace # define STACKTRACE_NAMESAPCE_BEGIN namespace STACKTRACE_NAMESAPCE { void dummy_for_semicolon_do_not_use() # define STACKTRACE_NAMESAPCE_END } void dummy_for_semicolon_do_not_use() #endif #ifndef INTERNAL_NAMESAPCE # define INTERNAL_NAMESAPCE internal # define INTERNAL_NAMESAPCE_BEGIN namespace INTERNAL_NAMESAPCE { void dummy_for_semicolon_do_not_use() # define INTERNAL_NAMESAPCE_END } void dummy_for_semicolon_do_not_use() #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/extensions/stacktrace/posix.cpp0000644000076500000240000000765211567506016021464 00000000000000/* * Copyright (C) 2009 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include ////////////////////////////////////////////////////////////////////// // enyo::posix functions DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; bool POSIX::IsAbsolute(const std::string& path) { return (!path.empty()) && path[0] == '/'; } std::string POSIX::Cwd() { char buf[PATH_MAX]; Error::Unless(getcwd(buf, sizeof(buf)) == buf); return std::string(buf); } bool POSIX::Exists(const std::string& path) { return access(path.c_str(), F_OK) == 0; } bool POSIX::IsExecutable(const std::string& path) { return access(path.c_str(), X_OK) == 0; } std::string POSIX::SearchCommand(const std::string& cmd, const std::string& path) { if (IsAbsolute(cmd)) { if (!IsExecutable(cmd)) { throw Error(EACCES); } return cmd; } if (std::find(cmd.begin(), cmd.end(), '/') != cmd.end()) { if (!IsExecutable(cmd)) { throw Error(EACCES); } std::string wd(Cwd()); std::string result; result.reserve(cmd.size() + 1 + wd.size()); result += wd; result += '/'; result += cmd; return result; } if (path.empty()) { throw Error(ENOENT); } bool found = false; std::string wd(Cwd()); std::string c; std::string::const_iterator p = path.begin(); const std::string::const_iterator end = path.end(); while (true) { std::string::const_iterator colon = std::find(p, end, ':'); if (p == colon || (std::distance(p, colon) == 1 && *p == '.')) { c.assign(wd); c += '/'; } else if (*p == '/') { c.assign(p, colon); c += '/'; } else { c.assign(wd); c += '/'; c.assign(p, colon); c += '/'; } c.append(cmd); if (IsExecutable(c)) { return c; } if ((!found) && Exists(c)) { found = true; } if (colon == end) { break; } p = colon + 1; } if (found) { throw Error(EACCES); } throw Error(ENOENT); } void POSIX::CreateSafely(const std::string& path) { const char* p = path.c_str(); while (true) { int ret = ::open(p, O_CREAT | O_EXCL, 0666); if (ret >= 0) { ::close(ret); return; } if (errno != EEXIST) { throw Error(); } Error::Unless(::unlink(p) == 0); } } void POSIX::Rename(const std::string& from, const std::string& to) { Error::Unless(::rename(from.c_str(), to.c_str()) == 0); } std::string POSIX::RealPath(const std::string &path) { char p[PATH_MAX]; ::realpath(path.c_str(), p); std::string result(p); return result; } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/posix.hpp0000644000076500000240000000564211335240426021457 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2009 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__POSIX__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__POSIX__INCLUDE_GUARD #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace POSIX { // Returns true if PATH is absolute. Existence and permissions are // not checked. bool IsAbsolute(const std::string& path); // Returns the path of the current directory. std::string Cwd(); // Returns true if PATH exists (that is, access(F_OK) returns // true). bool Exists(const std::string& path); // Returns true if PATH is executable (that is, access(X_OK) // returns true). bool IsExecutable(const std::string& path); // Searches for CMD in in PATH (which has to be colon-separated) // if it is not an absolute path name, and returns the first // matching executable entry. Throws error(ENOENT) if the command // cannot be found, and error(EACCES) if all the commands found // lack appropriate permission. std::string SearchCommand(const std::string& cmd, const std::string& path); // Creates PATH safely, so that it is guaranteed to be owned by // the caller's UID, even if it is located in a 1777 directory. // An existing file is deleted. void CreateSafely(const std::string& path); // Renames FROM to PATH, replacing the latter if it exists. void Rename(const std::string& from, const std::string& to); // Resolves symbolic links. std::string RealPath(const std::string &); } // Enyo::POSIX STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/posix_descriptor.cpp0000644000076500000240000000540011335533045023702 00000000000000/* * Copyright (C) 2009, 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; void POSIX::Descriptor::OpenReadOnly(const char *path) { Descriptor tmp(::open(path, O_RDONLY, 0)); Error::Unless(tmp.IsOpen()); Close(); // explicit close to propagate exception. swap(tmp); } //void //POSIX::Descriptor::OpenReadOnly(const Descriptor &dir, const char *path) //{ // Descriptor tmp(::openat(dir.GetRaw(), path, O_RDONLY, 0)); // Error::Unless(tmp.IsOpen()); // Close(); // explicit close to propagate exception. // swap(tmp); //} void POSIX::Descriptor::Close() { if (IsOpen()) { const int d = desc; desc = -1; Error::Unless(::close(d) == 0); } } void POSIX::Descriptor::CloseNoThrow() throw () { if (IsOpen()) { ::close(desc); desc = -1; } } size_t POSIX::Descriptor::read(void *buffer, size_t len) { ssize_t ret = ::read(desc, buffer, len); Error::Unless(ret >= 0); return ret; } void POSIX::Descriptor::SetCloseOnExec(bool on) { int ret = fcntl(GetRaw(), F_GETFD, 0); Error::Unless(ret >= 0); long flag; if (on) { flag = ret | FD_CLOEXEC; } else { flag = ret & ~FD_CLOEXEC; } Error::Unless(fcntl(GetRaw(), F_SETFD, flag) >= 0); } void POSIX::Descriptor::SetNonBlocking(bool on) { int ret = fcntl(GetRaw(), F_GETFL, 0); Error::Unless(ret >= 0); long flag; if (on) { flag = ret | O_NONBLOCK; } else { flag = ret & ~O_NONBLOCK; } Error::Unless(fcntl(GetRaw(), F_SETFL, flag) >= 0); } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/posix_error.cpp0000644000076500000240000000306211335241757022665 00000000000000/* * Copyright (C) 2009, 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; POSIX::Error::Error() : std::runtime_error(ErrorString(errno)), code(errno) { } POSIX::Error::Error(int c) : std::runtime_error(ErrorString(c)), code(c) { } POSIX::Error::~Error() throw () { } void POSIX::Error::Throw() { throw Error(); } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/posix_error_string.cpp0000644000076500000240000000457211335241604024251 00000000000000/* * Copyright (C) 2009 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include // The following switch construct is necessary because we do not know // which error function is included by the C++ run-time library. (The // GNU and XSI prototypes have different return values, and slightly // different semantics.) namespace { template struct strerror_switch { }; template <> struct strerror_switch { static const char* okay(char *buf, int ret) { if (ret == 0) { return buf; } return 0; } }; template <> struct strerror_switch { static const char* okay(char *, char* ret) { if (ret != 0) { return ret; } return 0; } }; template const char* strerror_check(char *buf, T ret) { return strerror_switch::okay(buf, ret); } } DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; std::string POSIX::ErrorString(int code) { char buf[128]; const char *buf2 = strerror_check(buf, strerror_r(code, buf, sizeof(buf))); if (buf2) { return std::string(buf2); } else { static const std::string str_unknown("unknown error"); return str_unknown; } } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/posix_pipe.cpp0000644000076500000240000000300211335241663022457 00000000000000/* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; POSIX::Pipe::Pipe() { int fds[2]; Error::Unless(pipe(fds) == 0); read.Reset(fds[0]); write.Reset(fds[1]); } POSIX::Pipe::~Pipe() { } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/posix_process.cpp0000644000076500000240000001116211335243257023207 00000000000000/* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; POSIX::ProcessResult::ProcessResult() : Status(-1), Signal(-1) { } POSIX::ProcessResult::~ProcessResult() { } // Read from OUTPUT and ERROR and store the result in RESULT. static void run(pid_t pid, POSIX::Descriptor &output, POSIX::Descriptor &error, POSIX::ProcessResult &result) { int nfds = 2; struct pollfd fds[2]; fds[0].fd = output.GetRaw(); fds[0].events = POLLIN | POLLRDNORM | POLLRDBAND | POLLPRI; fds[1].fd = error.GetRaw(); fds[1].events = POLLIN | POLLRDNORM | POLLRDBAND | POLLPRI; std::string *strings[2]; strings[0] = &result.Output; strings[1] = &result.Error; result.Output.clear(); result.Error.clear(); char buf[1024]; while (nfds > 0) { // Always use both descriptors, the kernel will skip them if necessary. POSIX::Error::Unless(poll(fds, 2, -1) >= 1); for (int i = 0; i < 2; ++i) { if (fds[i].revents & POLLNVAL) { throw POSIX::Error(EBADF); } if (fds[i].revents & (POLLIN | POLLRDNORM | POLLRDBAND | POLLPRI)) { int ret = read(fds[i].fd, buf, sizeof(buf)); switch (ret) { case 0: // EOF, release this descriptor. fds[i].events = 0; --nfds; break; case -1: if (errno != EAGAIN && errno != EWOULDBLOCK) { throw POSIX::Error(); } break; default: strings[i]->append(buf, ret); } } else if (fds[i].revents & (POLLERR | POLLHUP )) { // Can also be set when POLLIN etc. is set. In this case, we // could safe a poll syscall when the read was smaller than // the whole buffer. fds[i].events = 0; --nfds; } } } int status; POSIX::Error::Unless(waitpid(pid, &status, 0) >= 0); if (WIFEXITED(status)) { result.Status = WEXITSTATUS(status); result.Signal = -1; } else if (WIFSIGNALED(status)) { result.Status = -1; result.Signal = WTERMSIG(status); } else { // Cannot actually happen. result.Status = -1; result.Signal = -1; } } void POSIX::Run(const char *program, char *const args[], char *const env[], ProcessResult &result) { Sigset block_chld; block_chld.Add(SIGCHLD); SaveSigProcMask saved(block_chld); POSIX::Pipe output, error; output.Read().SetCloseOnExec(true); output.Read().SetNonBlocking(true); error.Read().SetCloseOnExec(true); error.Read().SetNonBlocking(true); SpawnFileActions actions; actions.AddOpen(0, "/dev/null", O_RDONLY, 0); actions.AddDup2(output.Write().GetRaw(), 1); actions.AddDup2(error.Write().GetRaw(), 2); SpawnAttr attr; // Ideally, we would want to restore all signals to their default // handlers, but if we specify the full set, the spawn fails in the // child (silently!). attr.SetSigDefault(Sigset().Add(SIGINT).Add(SIGQUIT)); attr.SetFlags(POSIX_SPAWN_SETSIGDEF); pid_t pid; POSIX::Error::Unless (posix_spawnp(&pid, program, actions.GetRaw(), attr.GetRaw(), args, env) == 0); output.Write().Close(); error.Write().Close(); run(pid, output.Read(), error.Read(), result); } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/process.hpp0000644000076500000240000000357311335240444021774 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__PROCESS__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__PROCESS__INCLUDE_GUARD #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace POSIX { struct ProcessResult { std::string Output; std::string Error; int Status; int Signal; ProcessResult(); ~ProcessResult(); }; // not thread-safe void Run(const char *program, char *const args[], char *const env[], ProcessResult &result); } // Enyo::POSIX STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/raw_process.hpp0000644000076500000240000000644011335243300022633 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__RAW_PROCESS__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__RAW_PROCESS__INCLUDE_GUARD #include #include #include // for O_* constants #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace POSIX { class SpawnFileActions { posix_spawn_file_actions_t actions; SpawnFileActions(const SpawnFileActions &); SpawnFileActions &operator=(const SpawnFileActions &); public: SpawnFileActions() { POSIX::Error::Unless(posix_spawn_file_actions_init(&actions) == 0); } ~SpawnFileActions() { posix_spawn_file_actions_destroy(&actions); } void AddClose(int fd) { POSIX::Error::Unless (posix_spawn_file_actions_addclose(&actions, fd) == 0); } void AddOpen(int fd, const char *path, int flag, mode_t mode) { POSIX::Error::Unless(posix_spawn_file_actions_addopen (&actions, fd, path, flag, mode) == 0); } void AddDup2(int from, int to) { POSIX::Error::Unless(posix_spawn_file_actions_adddup2 (&actions, from, to) == 0); } posix_spawn_file_actions_t *GetRaw() { return &actions; } }; class SpawnAttr { posix_spawnattr_t attr; SpawnAttr(const SpawnAttr &); SpawnAttr &operator=(const SpawnAttr &); public: SpawnAttr() { POSIX::Error::Unless(posix_spawnattr_init(&attr) == 0); } ~SpawnAttr() { posix_spawnattr_destroy(&attr); } void SetFlags(short flags) { POSIX::Error::Unless(posix_spawnattr_setflags(&attr, flags) == 0); } void SetSigDefault(const Sigset &sig) { POSIX::Error::Unless(posix_spawnattr_setsigdefault (&attr, sig.GetRaw()) == 0); } posix_spawnattr_t *GetRaw() { return &attr; } }; } // POSIX STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/signal.hpp0000644000076500000240000000501511335240476021571 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef DIAGNOSTICS__EXTENSIONS__STACKTRACE__SIGNAL__INCLUDE_GUARD #define DIAGNOSTICS__EXTENSIONS__STACKTRACE__SIGNAL__INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace POSIX { class Sigset { sigset_t sigset; public: Sigset() { Empty(); } Sigset &Empty() { sigemptyset(&sigset); return *this; } Sigset &Fill() { sigfillset(&sigset); return *this; } Sigset &Add(int sig) { sigaddset(&sigset, sig); return *this; } Sigset &Delete(int sig) { sigdelset(&sigset, sig); return *this; } sigset_t *GetRaw() { return &sigset; } const sigset_t *GetRaw() const { return &sigset; } }; class SaveSigProcMask { sigset_t saved; SaveSigProcMask(const SaveSigProcMask &); SaveSigProcMask &operator=(const SaveSigProcMask &); public: SaveSigProcMask() { sigprocmask(0, 0, &saved); } SaveSigProcMask(const Sigset &block) { sigprocmask(SIG_BLOCK, block.GetRaw(), &saved); } const sigset_t &Saved() const { return saved; } ~SaveSigProcMask() { sigprocmask(SIG_SETMASK, &saved, 0); } }; } // Enyo::POSIX STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; #endif diagnostics-0.3.3/diagnostics/extensions/stacktrace/stacktrace.t.cpp0000644000076500000240000001625311567506016022705 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009,2010 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* * The tests in this file are based on code written by Florian Weimer: * * Copyright (C) 2009,2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ /** * @file diagnostics/extensions/stacktrace/stacktrace.t.cpp * * $Id: stacktrace.t.cpp 895 2011-05-26 17:19:57Z tautschn $ * * @author Michael Tautschnig */ #include // tested component #include #include #include #include #include #include #include #define TEST_COMPONENT_NAME Stacktrace #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; void test_posix(Test_Data & test_data) { using namespace ::diagnostics::stacktrace::POSIX; TEST_ASSERT(Exists("/")); TEST_ASSERT(Exists(".")); TEST_ASSERT(Exists("test")); TEST_ASSERT(IsAbsolute("/")); TEST_ASSERT(IsExecutable("/")); TEST_ASSERT(IsExecutable(".")); TEST_ASSERT(IsExecutable("test")); TEST_ASSERT(!Exists("/enyo does not exist")); TEST_ASSERT(IsAbsolute("/enyo does not exist")); TEST_ASSERT(!IsExecutable("/enyo does not exist")); TEST_ASSERT(!IsAbsolute(".")); TEST_ASSERT(!IsAbsolute("./")); TEST_ASSERT_RELATION(SearchCommand("sh", "/bin:/usr/bin"), ==, "/bin/sh"); TEST_ASSERT_RELATION(SearchCommand("sh", ".:/bin:/usr/bin"), ==, "/bin/sh"); TEST_ASSERT_RELATION(SearchCommand("test", ".:/bin:/usr/bin"), ==, Cwd() + "/test"); TEST_ASSERT_RELATION(SearchCommand("sh", ":/bin:/usr/bin"), ==, "/bin/sh"); TEST_ASSERT_RELATION(SearchCommand("test", ":/bin:/usr/bin"), ==, Cwd() + "/test"); TEST_ASSERT_RELATION(SearchCommand("test", "/enyo does not exist:"), ==, Cwd() + "/test"); TEST_THROWING_BLOCK_ENTER; SearchCommand("sh", "/enyo does not exist:."); TEST_THROWING_BLOCK_EXIT2(Error, e.Code() == ENOENT); TEST_THROWING_BLOCK_ENTER; SearchCommand("Makefile", ".:/enyo does not exist"); TEST_THROWING_BLOCK_EXIT2(Error, e.Code() == EACCES); } void test_posix_process(Test_Data & test_data) { using namespace ::diagnostics::stacktrace::POSIX; ProcessResult res; static char *const args1[] = {"sh", "-c", "echo stdout; echo stderr >&2; exit 17", NULL}; Run("/bin/sh", args1, NULL, res); TEST_ASSERT_RELATION(res.Output, ==, "stdout\n"); TEST_ASSERT_RELATION(res.Error, ==, "stderr\n"); TEST_ASSERT_RELATION(res.Status, ==, 17); static char *const args2[] = {"sh", "-c", "echo stdout-only; exit 18", NULL}; Run("/bin/sh", args2, NULL, res); TEST_ASSERT_RELATION(res.Output, ==, "stdout-only\n"); TEST_ASSERT_RELATION(res.Error, ==, ""); TEST_ASSERT_RELATION(res.Status, ==, 18); static char *const args3[] = {"sh", "-c", "echo stderr-only >&2; exit 19", NULL}; Run("/bin/sh", args3, NULL, res); TEST_ASSERT_RELATION(res.Output, ==, ""); TEST_ASSERT_RELATION(res.Error, ==, "stderr-only\n"); TEST_ASSERT_RELATION(res.Status, ==, 19); static char *const args4[] = {"sh", "-c", "sleep 1; echo sleep-stdout; echo sleep-stderr >&2; exit 20", NULL}; Run("/bin/sh", args4, NULL, res); TEST_ASSERT_RELATION(res.Output, ==, "sleep-stdout\n"); TEST_ASSERT_RELATION(res.Error, ==, "sleep-stderr\n"); TEST_ASSERT_RELATION(res.Status, ==, 20); } using namespace ::diagnostics::stacktrace::Traceback; namespace { struct my_frame { bool resolved; std::string function; std::string file; unsigned line; my_frame() : resolved(false), line(0) { } }; struct my_visitor : FrameVisitor, SourceVisitor { std::vector loc; unsigned unresolved; my_visitor() : unresolved(0) { } bool Frame(void *, const char *dso, void *resolved) { if (!(resolved && WalkSource(dso, resolved))) { loc.push_back(my_frame()); } return true; } void Frame(const char *func, const char *source, unsigned line) { my_frame f; f.resolved = true; f.function = func; f.file = source; f.line = line; loc.push_back(f); } }; inline void call_my_visitor_2(my_visitor &v) { v.Walk(); } inline void call_my_visitor_1(my_visitor &v) { call_my_visitor_2(v); } } void test_traceback(Test_Data & test_data) { my_visitor v; call_my_visitor_1(v); TEST_ASSERT_RELATION(v.loc.at(0).function, ==, "call_my_visitor_2"); TEST_ASSERT_RELATION(v.loc.at(1).function, ==, "call_my_visitor_1"); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&test_posix,LEVEL_PROD); TEST_NORMAL_CASE(&test_posix_process,LEVEL_PROD); #ifndef __FreeBSD_kernel__ TEST_NORMAL_CASE(&test_traceback,LEVEL_PROD); #endif TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; diagnostics-0.3.3/diagnostics/extensions/stacktrace/traceback_addr2line.cpp0000644000076500000240000001011311335242117024137 00000000000000/* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include #include #include #include #define __STDC_FORMAT_MACROS #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; ////////////////////////////////////////////////////////////////////// // Traceback::SourceVisitor static const char * addr2line_path() { static std::string path; // Not totally thread-safe, but okay because the whole facility is // not thread-safe. if (path.empty()) { try { path = POSIX::SearchCommand ("addr2line", "/bin:/usr/bin:/usr/local/bin"); } catch (POSIX::Error &) { path.assign("", 1); // string with NUL character } } const char *p = path.c_str(); if (*p) { return p; } return 0; } Traceback::SourceVisitor::~SourceVisitor() { } // Workaround for addr2line not picking up some DSO debug symbols. static std::string message_dso_name(const char *dso) { std::string name(POSIX::RealPath(dso)); std::string name_dbg("/usr/lib/debug"); name_dbg += name; if (POSIX::Exists(name_dbg)) { return name_dbg; } else { return name; } } bool Traceback::SourceVisitor::WalkSource(const char *dso, void *addr) { const char *addr2line_cmd = addr2line_path(); if (!addr2line_cmd) { return false; } std::string realdso(message_dso_name(dso)); char saddr[3 * sizeof(void *) + 1]; snprintf(saddr, sizeof(saddr), "0x%" PRIxPTR, reinterpret_cast(addr)); const char *argv[] = { "addr2line", "-C", "-f", "-i", "-e", realdso.c_str(), saddr, NULL }; POSIX::ProcessResult res; try { POSIX::Run(addr2line_cmd, const_cast(argv), NULL, res); } catch (POSIX::Error &) { return false; } if (!res.Error.empty()) { return false; } bool found = false; std::string::iterator p = res.Output.begin(); const std::string::iterator end = res.Output.end(); while (p != end) { // Line with the function name. std::string::iterator start = p; while (p != end && *p != '\n') { ++p; } if (p == end) { break; } std::string function(start, p); ++p; // Line with FILENAME:LINENO. start = p; while (p != end && *p != '\n') { ++p; } if (p == end) { break; } std::string::iterator nl = p; while (p != start && *p != ':') { --p; } if (p == start) { // no colon break; } std::string file(start, p); unsigned line; if (sscanf(res.Output.c_str() + (p - res.Output.begin()) + 1, "%u", &line) != 1) { break; } if (function == "??" && file == "??") { break; } Frame(function.c_str(), file.c_str(), line); found = true; p = nl + 1; } return found; } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/traceback_handler.cpp0000644000076500000240000001246511557546240023736 00000000000000// Verbose terminate_handler -*- C++ -*- /* * Changes for traceback support: * * Copyright (C) 2009, 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ // The original FSF copyright header follows. // // Copyright (C) 2001, 2002, 2004, 2005 Free Software Foundation // // This file is part of the GNU ISO C++ Library. This library is free // software; you can redistribute it and/or modify it under the // terms of the GNU General Public License as published by the // Free Software Foundation; either version 2, or (at your option) // any later version. // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // You should have received a copy of the GNU General Public License along // with this library; see the file COPYING. If not, write to the Free // Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, // USA. // As a special exception, you may use this file as part of a free software // library without restriction. Specifically, if other files instantiate // templates or use macros or inline functions from this file, or you compile // this file and link it with other files to produce an executable, this // file does not by itself cause the resulting executable to be covered by // the GNU General Public License. This exception does not however // invalidate any other reasons why the executable file might be covered by // the GNU General Public License. #include #include #include #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; void Traceback::InstallHandler() { std::set_terminate(Traceback::TerminateHandler); } namespace { struct my_visitor : Traceback::FrameVisitor, Traceback::SourceVisitor { bool source_info; bool cxa_seen; my_visitor() : source_info(true), cxa_seen(false) { } bool Frame(void *original, const char *dso, void *resolved) { if (resolved) { if (!(source_info && WalkSource(dso, resolved))) { fprintf(stderr, " at %s@%p\n", dso, resolved); } } else { fprintf(stderr, " at @%p\n", original); } return true; } void Frame(const char *func, const char *source, unsigned line) { if (!cxa_seen) { if (strcmp(func, "__cxa_throw") == 0) { cxa_seen = true; } } else { fprintf(stderr, " at %s (%s:%u)\n", func, source, line); } } }; } // A replacement for the standard terminate_handler which prints // more information about the terminating exception (if any) on // stderr. void Traceback::TerminateHandler() { static bool terminating; if (terminating) { fputs("terminate called recursively\n", stderr); abort (); } terminating = true; my_visitor v; // Make sure there was an exception; terminate is also called for an // attempt to rethrow when there is no suitable exception. std::type_info *t = abi::__cxa_current_exception_type(); if (t) { // Note that "name" is the mangled name. char const *name = t->name(); { int status = -1; char *dem = 0; dem = abi::__cxa_demangle(name, 0, 0, &status); fputs("Exception ", stderr); if (status == 0) { fputs(dem, stderr); } else { fputs(name, stderr); } if (status == 0) { free(dem); } } // If the exception is derived from std::exception, we can // give more information. try { throw; } catch (std::bad_alloc &exc) { char const *w = exc.what(); fputs(": ", stderr); fputs(w, stderr); v.source_info = false; // reduce memory pressure } catch (std::exception &exc) { char const *w = exc.what(); fputs(": ", stderr); fputs(w, stderr); } catch (...) { } fputc('\n', stderr); } else { fputs("Exception: std::terminate called\n", stderr); v.cxa_seen = true; } v.Walk(); abort(); } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/traceback_resolve.cpp0000644000076500000240000000570511335547501023772 00000000000000/* * Copyright (C) 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; namespace { enum { NO_DATA = 0, STOP_WALK = 1, CONTINUE_WALK = 2 }; struct state { uintptr_t original; Traceback::FrameVisitor *visitor; }; } static std::string get_executable_name_once() { return POSIX::RealPath("/proc/self/exe"); } static const char * executable_name() { static std::string name(get_executable_name_once()); return name.c_str(); } static int callback(struct dl_phdr_info *info, size_t, void *data) { state *pst = static_cast(data); uintptr_t original = pst->original; for (unsigned i =0; i < info->dlpi_phnum; ++i) { uintptr_t start = info->dlpi_addr + info->dlpi_phdr[i].p_vaddr; uintptr_t end = start + info->dlpi_phdr[i].p_memsz; if (start <= original && original < end) { uintptr_t mapped = original - info->dlpi_addr; const char *name = info->dlpi_name; if (name == 0 || *name == 0) { name = executable_name(); } if (pst->visitor->Frame(reinterpret_cast(original), name, reinterpret_cast(mapped))) { return CONTINUE_WALK; } else { return STOP_WALK; } } } // Keep scanning for a matching DSO. return NO_DATA; } bool Traceback::FrameVisitor::frame(void *original) { state st; st.original = reinterpret_cast(original); st.visitor = this; switch (dl_iterate_phdr(callback, &st)) { case NO_DATA: // Resolution failed. return Frame(original, 0, 0); case STOP_WALK: return false; case CONTINUE_WALK: return true; } abort(); } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/traceback_walk.cpp0000644000076500000240000000443311335547506023253 00000000000000/* * Copyright (C) 2009, 2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; STACKTRACE_NAMESAPCE_BEGIN; Traceback::FrameVisitor::~FrameVisitor() { } namespace { struct state { bool first; Traceback::FrameVisitor *visitor; state(Traceback::FrameVisitor * v) : first(true), visitor(v) { } }; } static _Unwind_Reason_Code get_unwind_info_cb(struct _Unwind_Context *context, void *data) { state *v = static_cast(data); // See libjava/stacktrace.cpp. _Unwind_Ptr ip; int ip_before_insn; ip = _Unwind_GetIPInfo(context, &ip_before_insn); if (!ip_before_insn) { --ip; } // Skip the Walk() frame. if (v->first) { v->first = false; return _URC_NO_REASON; } if (v->visitor->frame(reinterpret_cast(ip))) { return _URC_NO_REASON; } else { return _URC_NORMAL_STOP; } } void Traceback::FrameVisitor::Walk() { state st(this); _Unwind_Backtrace(get_unwind_info_cb, &st); // The following prevents tail call optimization, so we know that // this frame is always on the stack. __asm__ (""); } STACKTRACE_NAMESAPCE_END; DIAGNOSTICS_NAMESPACE_END; diagnostics-0.3.3/diagnostics/extensions/stacktrace/use_case.t.cpp0000644000076500000240000000567011335257115022345 00000000000000/* -*- Mode: C++; tab-width: 4 -*- */ /* vi: set ts=4 sw=4 noexpandtab: */ /* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009,2010 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* * The tests in this file are based on code written by Florian Weimer: * * Copyright (C) 2009,2010 Florian Weimer * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ /** * @file diagnostics/extensions/stacktrace/use_case.t.cpp * * $Id: use_case.t.cpp 870 2010-02-12 13:57:15Z tautschnig $ * * @author Michael Tautschnig */ #include #include namespace diagnostics { class Logger; void set_initial_loggers(::std::vector & loggers) { } } // Demonstration of the traceback facility int main(int argc, char* argv[]) { ::diagnostics::stacktrace::Traceback::InstallHandler(); std::vector v; v.at(0); return 0; } diagnostics-0.3.3/diagnostics/frame/0000755000076500000240000000000011567507570014441 500000000000000diagnostics-0.3.3/diagnostics/frame/exception.cpp0000644000076500000240000000303711172433106017047 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/exception.cpp * * $Id: exception.cpp,v 1.5 2005/06/23 09:54:18 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref diagnostics::Exception */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Exception::~Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/exception.hpp0000644000076500000240000000615711436732431017070 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/exception.hpp * * $Id: exception.hpp,v 1.15 2005/06/23 09:54:18 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref diagnostics::Exception Interface */ #ifndef DIAGNOSTICS__FRAME__EXCEPTION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__EXCEPTION_HPP__INCLUDE_GUARD #include /** * @brief set to throw() if you have ::std::exception::~exception() * and ::std::exception::~what() declared with throw() */ #ifndef DIAGNOSTICS_EXCEPTIONS_THROW_DECL # define DIAGNOSTICS_EXCEPTIONS_THROW_DECL throw() #endif // used in the interface by reference #include // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Exception diagnostics/frame/exception.hpp * * @brief Abstract base class for all exceptions of diagnostics. You * _can_ use it as base class for you execeptions, too. * * @attention If you do not use it as base class for your exception * (and there is no problem with doing so), make sure the @ref * DIAGNOSTICS_BASE_EXCEPTION_TYPE and @ref * DIAGNOSTICS_BASE_EXCEPTION_STR_WHAT are set suitable. * * @nosubgrouping */ class Exception : public ::std::exception { //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief noop * * @throw never */ virtual ~Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief returns the case for the trouble. * * @throw never */ virtual char const * what() const DIAGNOSTICS_EXCEPTIONS_THROW_DECL =0; /** * @brief returns the name of the exception * * @throw never */ virtual char const * name() const =0; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/level.hpp0000644000076500000240000001444211172433106016167 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/level.hpp * * @brief [LEVEL: beta] definition of the diagnostic levels: @ref diagnostics::Level_t * * $Id: level.hpp,v 1.15 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @test library/interface/frame/level.t.cpp */ #ifndef DIAGNOSTICS__FRAME__LEVEL_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__LEVEL_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @brief The diagnostic levels (production, debug, audit, test, and system) * * The levels are used in three contexts: * * @arg First, each @ref ::diagnostics::Record (which describes some * event) has a diagnostic level. If the record has been generated by * an annotation (a predefined macro), then the level is identical to * the level of this annotation. * * @arg Second, a binary is built with a specific debugging * level. audit annotations are ignored in production and debugging * builds, and audit and debug annotations are ignored in production * builds. * * @arg this, a @ref diagnostics::unittest::Test_Case can be * specified for different build debugging levels, for example, a * Test_Case might be supposed to work correctly under @ref * diagnostics::LEVEL_DEBUG and @ref diagnostics::LEVEL_AUDIT but not * under @ref diagnostics::LEVEL_PROD (see the detailed description of * the levels). * * The third item might be confusing: But consider an annotation * * DEBUG_CHECK(Null_Pointer,ptr!=NULL) * * This annotation will be ignored in a production build, i.e., the * programmer means, that this check is not necessary in production * code. Consequently, if the check finds a null pointer in code which * is supposed to be production code, it is an error. Therefore, the * programmer must specify the build levels which are suitable for a * test case. * */ typedef enum { /** * The production level is meant for the release builds. Thus, * only those checks are included into the build, which are * expected to be violated from time to time by production * code. For example a check whether a file exists might still be * necessary in a production build. * * In other words, each module assumes that it is works properly * and that it is used properly. Only those checks are included * which guard the code against external errors such as input * kludge. * * @attention This means, that a module in the production build is * behaving undefined, if its debug-preconditions are not met. */ LEVEL_PROD=0, /** * In the debug level, each module has to check all inputs for * their correctness, i.e., if a module is misused by another * module, the module should throw an exception. The debug level * should be fairly efficient tough. * * Summarized, each moduels checks that it is used properly -- * under the assumption that it works internally correctly. */ LEVEL_DEBUG=1, /** * In the audit level, each module has to check its internal * consistency in addition to preconditions, i.e., it has to * assert its class invariances, loop invariances, and post * conditions. * * @attention If the module is working correctly, then the outside * observable behavior under LEVEL_DEBUG and LEVEL_AUDIT should be * the same (functionally). * * In addition, the audit level provides massive tracing of the * controll flow. For this reason, and for the invariance * checking, the performance of the audit build is low. Thus this * build type is mainly aimed at module development and testing. * * Summarized, each moduel checks that it is used properly and * works properly. */ LEVEL_AUDIT=2, /** * All annotation which are written for testing only, i.e., * test_cases, should use this diagnostic level. * * While LEVEL_PROD, LEVEL_DEBUG, and LEVEL_AUDIT are ment for * code which is to be tested and ultimately deployed, LEVEL_TEST * is used by code which tests the code to be tested. * * All messages which have LEVEL_TEST are test-relevant, i.e., if * such a record occurs during a @ref * ::diagnostics::unittest::Test_Case, it will be part of the test * report (represented by @ref * ::diagnostics::unittest::Test_Run_Result). */ LEVEL_TEST=3, /** * All messages which are generated by the diagnostic environment * (and by the test system) and which are related to the * configuration of this environment are classified with this * diagnostic level. */ LEVEL_SYSTEM=4 } Level_t; /** * @brief The maximum integer value of @ref diagnostics::Level_t */ #define LEVEL_MAX LEVEL_SYSTEM /** * @brief Returns meaningful string for a diagnostic level. If the * level is unkown, i.e., a value not defined in the enum is passed, * "UNK" is returned. * * @throw never */ inline char const * level_to_string(Level_t const level) { char const * const level_map[]= {"PRO","DEB","AUD","TES","SYS","UNK"}; return (level>LEVEL_MAX ? level_map[LEVEL_MAX+1] : level_map[level]); } DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/level.t.cpp0000644000076500000240000000413311172433106016420 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/level.t.cpp * * @brief [LEVEL: beta] testing level.hpp * * $Id: level.t.cpp,v 1.11 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart */ #include // tested component #include #include #define TEST_COMPONENT_NAME Level #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; void test_level_to_string(Test_Data & test_data) { ::std::ostringstream stream; for(int i=0;i<=LEVEL_MAX+1;++i) stream << level_to_string(static_cast(i)) << ::std::endl; TEST_ASSERT(test_data.compare("all conversions",stream.str())); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&test_level_to_string,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logger.cpp0000644000076500000240000000277111172433106016334 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logger.cpp * * $Id: logger.cpp,v 1.3 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref * ::diagnostics::Logger Interface */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Logger::~Logger() { } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logger.hpp0000644000076500000240000000755011172433106016341 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logger.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Logger Interface * * $Id: logger.hpp,v 1.11 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @test no testing -- no compliance test */ #ifndef DIAGNOSTICS__FRAME__LOGGER_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__LOGGER_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; // used in the interface by reference // class Record; /** * @class Logger diagnostics/frame/logger.hpp * * @brief A Logger can be registered in the logging framework (see * @ref Logging_Config). Each @ref Record being logged subsequently is * passed to the Logger (by invocations of @ref Logging_Facility::log). * * In general, each Logger has to work without throwing any exceptions * since Loggers are used to report errors -- error reporting which * has error conditions is not a good idea. However, to provide a * possibility to report problems, each Logger can use the @ref * DIAGNOSTICS_PANIC_LOG macro to report a problem. If a logger runs * into a problem, it should try to go on as well as possible. * * Logger do not have to take care for mutual exclusion: The framework * is only processing one log message after the other, a logger has * the guarantee that only one thread is accessing it at a time. * * @attention Loggers are not allowed to use the @ref * Logging_Facility::log call directly or indirectly. If @ref * DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING is set to 1, then such nested * logging attempts are checked for and in case, a message is written * to the panic log (see @ref DIAGNOSTICS_PANIC_LOG). * * @nosubgrouping */ class Logger { //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @throw never */ virtual ~Logger(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Logging Interface * @{ */ public: /** * @brief Logs a @ref Record. * * @throw never */ virtual void log(Record const & record) =0; /** * @brief Called by the framework, if the framework is shutting down, * and the logger is still registered in the framework. * * Once this method is called, no other method on the Logger will * be invoked again (not even the destructor). This happens * immediately before the process exits. Therefore, this method * might be used to call the destructor internally. * * @throw never */ virtual void close() =0; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_config.cpp0000644000076500000240000000516311172433106020026 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_config.cpp * * $Id: logging_config.cpp,v 1.6 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref diagnostics::Logging_Config */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; void Logging_Config::register_logger(Logger * const logger) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(guard); if(DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(guard)) throw Logging_Config_Exception("Recursive Lock: in Logging_Config::register_logger"); INTERNAL_NAMESPACE::Logging_Implementation::instance()->register_logger(logger); } void Logging_Config::unregister_logger(Logger * const logger) { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(guard); if(DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(guard)) throw Logging_Config_Exception("Recursive Lock: in Logging_Config::unregister_logger"); INTERNAL_NAMESPACE::Logging_Implementation::instance()->unregister_logger(logger); } void Logging_Config::init() { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(guard); if(DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(guard)) throw Logging_Config_Exception("Recursive Lock: in Logging_Config::init"); INTERNAL_NAMESPACE::Logging_Implementation::instance(); } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_config.hpp0000644000076500000240000001130211172433106020023 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_config.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Logging_Config facade * * $Id: logging_config.hpp,v 1.16 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @test library/interface/frame/logging_config.t.cpp */ #ifndef DIAGNOSTICS__FRAME__LOGGING_CONFIG_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__LOGGING_CONFIG_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; // used in the interface by reference // class Logger; /** * @class Logging_Config * * @brief The Logging_Config facade is used to configure the logging * framework: It offers the client the possibility to * register/unregister loggers dynamically. * * All calls to the Logging_Config and to @ref Logging_Facility::log * are mutexed. Nesting is not allowed, but is checked if @ref * DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING is set to 1. Nesting could only * occur, if a @ref Logger would attempt to call methods of * Logging_Config. * * @attention The first call to one of the methods of Logging_Config * or to @ref Logging_Facility::log causes the framework to * initialize itself. If initialization fails, ABORT is called. * * @note The user of this library should call @ref init() at the * beginning of the main function to ensure thast the framework is * properly initialized. * * @nosubgrouping */ class Logging_Config { //////////////////////////////////////////////////////////////////////////////// /** * @name Static Modifiers * @{ */ public: /** * @brief Registers a logger in the logging framework. * * First, the @a logger receives a @ref TYPE_LOG_OPEN message * immediately. If an exception occurs during logging this * message, @a logger is not registered. However, the message * might be sent already. * * @pre @a logger != NULL * @pre @a logger is not registered at the time of calling * @pre the call is not nested, i.e., orginates not from within * diagsnotic-land * @post the logger is registered * * @throw Logging_Config_Exception */ static void register_logger(Logger * const logger); /** * @brief Unregisters a logger in the logging framework. * * The @a logger receives a @ref TYPE_LOG_CLOSE message * beforehand. * * @attention If an exception occurs, the logger might be * unregistered or not. More specifically, if the exception * originates from final log message, then the @a logger is * already unregistered. * * @pre @a logger != NULL * @pre @a logger is registered * @pre the call is not nested, i.e., orginates not from within * diagsnotic-land * @post the logger is unregistered (and can be registered again) * * @throw Logging_Config_Exception */ static void unregister_logger(Logger * const logger); /** * @brief Enforces the initialization of the logging * framework. This call is a noop, once the logging framework is * initialized. * * @attention If init fails to set up its internal data * structures, it will report via @ref DIAGNOSTICS_PANIC_LOG and * then call ::std::abort. * * @attention Any call to @ref Logging_Config or @ref * Logging_Facility prior to the first call to init, causes an * implicit call to init. * * @pre the call is not nested, i.e., orginates not from within * diagsnotic-land * * @throw Logging_Config_Exception */ static void init(); // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_config.t.cpp0000644000076500000240000001735311172433106020274 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_config.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::Logging_Config * * $Id: logging_config.t.cpp,v 1.16 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @attention If an error occurs in this test-suite, the whole thing * might crash away, or provoced errors (since the logging is in * disray) may arise. */ #include #include // used components #include #include #include // furthermore used components -- it is circular -- however, the system is testing itself #include #include // test support #include #include #include #define TEST_COMPONENT_NAME Logging_Config #define TEST_COMPONENT_NAMESPACE diagnostics static ::diagnostics::testing::Dummy_Logger * static_dummy_logger=NULL; DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; /** * @brief registering and unregistering a @ref Logger */ void register_unregister(Test_Data & test_data) { Dummy_Logger * dummy_logger(new Dummy_Logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==0); Logging_Config::register_logger(dummy_logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==1); TEST_ASSERT(dummy_logger->records()[0].type()==TYPE_LOG_OPEN); TEST_ASSERT(dummy_logger->records()[0].level()==LEVEL_SYSTEM); // line == 1 iff logger is an initial one TEST_ASSERT(dummy_logger->records()[0].line()!=1); Logging_Config::unregister_logger(dummy_logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==2); TEST_ASSERT(dummy_logger->records()[1].type()==TYPE_LOG_CLOSE); TEST_ASSERT(dummy_logger->records()[1].level()==LEVEL_SYSTEM); // line == 1 iff logger is an final one TEST_ASSERT(dummy_logger->records()[0].line()!=1); } /** * @brief registering and unregistering a @ref Logger twice, * unregistering without registering, handing over NULL */ void invalid_register_unregister(Test_Data & test_data) { Dummy_Logger * dummy_logger(new Dummy_Logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==0); Logging_Config::register_logger(dummy_logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==1); TEST_ASSERT(dummy_logger->records()[0].type()==TYPE_LOG_OPEN); TEST_ASSERT(dummy_logger->records()[0].level()==LEVEL_SYSTEM); // line == 1 iff logger is an initial one TEST_ASSERT(dummy_logger->records()[0].line()!=1); // same logger registered twice TEST_THROWING_BLOCK_ENTER; Logging_Config::register_logger(dummy_logger); TEST_THROWING_BLOCK_EXIT(Logging_Config_Exception); // logger unchanged TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==1); // unregistering... ok Logging_Config::unregister_logger(dummy_logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==2); TEST_ASSERT(dummy_logger->records()[1].type()==TYPE_LOG_CLOSE); TEST_ASSERT(dummy_logger->records()[1].level()==LEVEL_SYSTEM); // line == 1 iff logger is an final one TEST_ASSERT(dummy_logger->records()[0].line()!=1); // unregistering a second time TEST_THROWING_BLOCK_ENTER; Logging_Config::unregister_logger(dummy_logger); TEST_THROWING_BLOCK_EXIT(Logging_Config_Exception); // logger unchanged TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==2); // registering a NULL pointer TEST_THROWING_BLOCK_ENTER; Logging_Config::register_logger(NULL); TEST_THROWING_BLOCK_EXIT(Logging_Config_Exception); // unregistering a NULL pointer TEST_THROWING_BLOCK_ENTER; Logging_Config::unregister_logger(NULL); TEST_THROWING_BLOCK_EXIT(Logging_Config_Exception); } /** * @brief checking for the registering a Dummy_Logger with @ref * Logging_Config::init * * @note The converse cannot be checked. Even if we would have an * explicit shut-down method, we could not shutdown, since we would * kick out the ::diagnostics::unittest::Dummy_Logger (not the * Dummy_Logger) -- it has to receive close(), which will * cause it to drop the Test_Case at hand. */ void static_init(Test_Data & test_data) { TEST_ASSERT(static_dummy_logger->is_closed()==0); TEST_ASSERT(static_dummy_logger->records().size()==2); // initial message TEST_ASSERT(static_dummy_logger->records()[0].type()==TYPE_LOG_OPEN); TEST_ASSERT(static_dummy_logger->records()[0].level()==LEVEL_SYSTEM); // line == 1 iff logger is an initial one TEST_ASSERT(static_dummy_logger->records()[0].line()==1); // testcase opens... TEST_ASSERT(static_dummy_logger->records()[1].type()==TYPE_TESTCASE_ENTER); TEST_ASSERT(static_dummy_logger->records()[1].level()==LEVEL_TEST); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; // must be first TEST_NORMAL_CASE1(&static_init,LEVEL_PROD,3,false); TEST_NORMAL_CASE(®ister_unregister,LEVEL_PROD); TEST_ABNORMAL_CASE(&invalid_register_unregister,LEVEL_PROD); TEST_SUITE_END; DIAGNOSTICS_NAMESPACE_BEGIN; void set_initial_loggers(::std::vector & loggers) { loggers.push_back(new File_Logger("test/diagnostic.log")); loggers.push_back(static_dummy_logger=new ::diagnostics::testing::Dummy_Logger); } DIAGNOSTICS_NAMESPACE_END; /** * @brief manual start -- we mess around with the initial logger: We * do NOT call @ref Logging_Config::init. */ int main(int argc,char ** argv) try { ::diagnostics::unittest::Stream_Test_System test_system(static_cast< ::diagnostics::Level_t>(DEBUG__LEVEL__), argc,argv,"test/test.dat", "test/result.log", ::std::cin, ::std::cout); test_system.add(::diagnostics::unittest::build_test_suite()); test_system.run(); return 0; } catch(::diagnostics::unittest::Test_System_Exception & e) { ::std::cerr << "An Error occurred -- caught Test_System_Exception with what '" << e.what() << "'" << ::std::endl; } catch(...) { ::std::cerr << "An Error occurred -- caught an unknown exception" << ::std::endl; } // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_config_exception.cpp0000644000076500000240000000363211172433106022103 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_config_exception.cpp * $Id: logging_config_exception.cpp,v 1.6 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref diagnostics::Logging_Config_Exception */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Logging_Config_Exception::Logging_Config_Exception(::std::string const & what) : Super(what) { } Logging_Config_Exception::Logging_Config_Exception(Self const & other) : Super(other) { } Logging_Config_Exception::~Logging_Config_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } char const * Logging_Config_Exception::name() const { return "Logging_Config_Exception"; } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_config_exception.hpp0000644000076500000240000000606111172433106022107 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_config_exception.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Logging_Config_Exception class * * $Id: logging_config_exception.hpp,v 1.6 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__FRAME__LOGGING_CONFIG_EXCEPTION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__LOGGING_CONFIG_EXCEPTION_HPP__INCLUDE_GUARD // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Logging_Config_Exception * * @brief The Logging_Config_Exception is thrown by @ref * Logging_Config and concrete implementations of @ref Logger if a * configuration error occurs. * * @nosubgrouping */ class Logging_Config_Exception : public Std_Exception { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Std_Exception Super; typedef Logging_Config_Exception Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @throw never */ explicit Logging_Config_Exception(::std::string const & what); /** * @throw never */ Logging_Config_Exception(Self const & ohter); /** * @throw never */ virtual ~Logging_Config_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @throw never */ virtual char const * name() const; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_facility.cpp0000644000076500000240000000552111172433106020363 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_facility.cpp * * $Id: logging_facility.cpp,v 1.8 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref diagnostics::Logging_Facility */ #include #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; void Logging_Facility::panic_log(::std::string const & what, char const * const base_file_name, char const * const file_name, int const line) { INTERNAL_NAMESPACE::Logging_Implementation::panic_log (what,base_file_name,file_name,line); } void Logging_Facility::log(Level_t const level, Type_t const type, int const nr_what, ::std::string const & str_what, char const * const base_file_name, char const * const file_name, int const line) try { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(guard); if(DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(guard)) { DIAGNOSTICS_PANIC_LOG_INTERNAL(::std::string("Recursive Lock: Logging_Facility::log()")); return; } INTERNAL_NAMESPACE::Logging_Implementation::instance()->log (level,type,nr_what,str_what,base_file_name,file_name,line); } catch(::std::exception & e) { DIAGNOSTICS_PANIC_LOG_INTERNAL (::std::string("::std::exception during logging: Logging_Facility::log(): ")+e.what()); } catch(...) { DIAGNOSTICS_PANIC_LOG_INTERNAL(::std::string("Unexpected Exception during logging: Logging_Facility::log()")); } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_facility.hpp0000644000076500000240000001436211172433106020373 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_facility.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Logging_Facility facade * * $Id: logging_facility.hpp,v 1.18 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/frame/logging_facility.t.cpp */ #ifndef DIAGNOSTICS__FRAME__LOGGING_FACILITY_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__LOGGING_FACILITY_HPP__INCLUDE_GUARD // used in the interface by value #include // used in the interface by value #include // used for the macro interface #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Logging_Facility diagnostics/frame/logging_facility.hpp * * @brief The Logging_Facility facade is used to send log messages * into the logging framework. * * The Logging_Facility is designed to be a minimal interface which * has to be known by a user of the diagnostic framework. The macros * and guards of the files in macros/ are built atop Logging_Facility * and do not use @ref Logging_Config. * * @nosubgrouping */ class Logging_Facility { //////////////////////////////////////////////////////////////////////////////// /** * @name Static Modifiers * @{ */ public: /** * @brief The main interface into the logging framework: logging a * message. Calls to @ref Logging_Config and to * Logging_Facility::log are mutexed. * * @a level is the level of the log message. * * @a type is the type of log message. * * @a nr_what is a numerical field which is for unconstrained use * by the client. It is intended to allow the client quick * classification of the log-messages. I use it in most cases for * describing a further log-level of production level log-messages * and for encoding the packge which is generating the log-message. * However, this is a personal convention. * * @a str_what is a string field which is for unconstrained use by * the client. All components of this library produce str_what * fields with entries of the form "FIELD=\"content\"". Again, * this is a convention -- which I personally adopted for other * packages, too. * * @a base_file_name contains the name of the file which was the * root of the include graph, i.e., if an error in an included * pice of code occurs, @a base_file_name is the name of file * which included the code. @a file_name is set to __FILE__ and @a * line to __LINE__. * * These arguments are used to construct a @ref * Record which is then presented to each @ref Logger * which is registered to the logging framework (via @ref * Logging_Config::register_logger). * * The missing parts of the @ref Record, i.e., pid, tid, date, and * hostname are supplemented by the implementation of log. * * @throw never -- internal errors are reported via * @a panic_log * * @attention The first call @ref Logging_Facility::log or to one * of methods of @ref Logging_Config might cause a call to abort, * if the initialization of the logging framework fails. To * enforce initialization, call @ref Logging_Config::init. */ static void log(Level_t const level, Type_t const type, int const nr_what, ::std::string const & str_what, char const * const base_file_name, char const * const file_name, int const line); /** * @brief panic_log is used inside of the logging framework and by * implementations @ref Logger to generate error messages. * * For the arguments, see @ref log. The effect of calling @ref * panic_log is simple: The arugments are printed via ::std::cerr. * * @attention This call is not mutexed * * @throw never -- and if it throws, everything is lost. */ static void panic_log(::std::string const & what, char const * const base_file_name, char const * const file_name, int const line); // @} }; DIAGNOSTICS_NAMESPACE_END; /** * @brief basis for all logging -- adds the basefile, file and line * and sends calls @ref diagnostics::Logging_Facility::log. * * @param LEVEL must be of type @ref diagnostics::Level_t * @param TYPE must of type @ref diagnostics::Type_t * @param NR_WHAT must be convertible to int (numerical field which is uninterpreted by the frame) * @param STR_WHAT must be convertible to ::std::string (string field which is uninterpreted by the frame) */ #define DIAGNOSTICS_BASE_LOG(LEVEL,TYPE,NR_WHAT,STR_WHAT) \ ::DIAGNOSTICS_NAMESPACE::Logging_Facility::log( \ (LEVEL), \ (TYPE), \ (NR_WHAT), \ (STR_WHAT), \ DIAGNOSTICS_BASE_FILE, \ __FILE__, \ __LINE__) /** * @brief basis for all panic logging -- adds the basefile, file and line * and sends calls @ref diagnostics::Logging_Facility::panic_log. * * @param WHAT must be convertible to ::std::string */ #define DIAGNOSTICS_PANIC_LOG(WHAT) \ ::DIAGNOSTICS_NAMESPACE::Logging_Facility::panic_log( \ WHAT, \ DIAGNOSTICS_BASE_FILE, \ __FILE__, \ __LINE__) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_facility.t.cpp0000644000076500000240000001040311172433106020620 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_facility.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::Logging_Facility * * $Id: logging_facility.t.cpp,v 1.16 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @attention If an error occurs in this test-suite, the whole thing * might crash away, or provoced errors (since the logging is in * disray) may arise. */ #include #include // used components #include #include // test support #include #include #define TEST_COMPONENT_NAME Logging_Facility #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; /** * @brief registering, two log messages, and unregistering a @ref Logger */ void register_send_unregister(Test_Data & test_data) { Dummy_Logger * dummy_logger(new Dummy_Logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==0); Logging_Facility::log(LEVEL_DEBUG,TYPE_TRACE_BINARY,0,"what2","base2","file2",3); TEST_ASSERT(dummy_logger->records().size()==0); Logging_Config::register_logger(dummy_logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==1); TEST_ASSERT(dummy_logger->records()[0].type()==TYPE_LOG_OPEN); Logging_Facility::log(LEVEL_AUDIT,TYPE_TRACE,10,"what","base","file",1); TEST_ASSERT(dummy_logger->records().size()==2); { Record const & r(dummy_logger->records()[1]); TEST_ASSERT(r.level()==LEVEL_AUDIT); TEST_ASSERT(r.type()==TYPE_TRACE); TEST_ASSERT(r.nr_what()==10); TEST_ASSERT(r.str_what()== "what"); TEST_ASSERT(r.base_file_name()=="base"); TEST_ASSERT(r.file_name()=="file"); TEST_ASSERT(r.line()==1); } Logging_Facility::log(LEVEL_DEBUG,TYPE_TRACE_BINARY,1,"what1","base1","file1",2); TEST_ASSERT(dummy_logger->records().size()==3); { Record const & r(dummy_logger->records()[2]); TEST_ASSERT(r.level()==LEVEL_DEBUG); TEST_ASSERT(r.type()==TYPE_TRACE_BINARY); TEST_ASSERT(r.nr_what()==1); TEST_ASSERT(r.str_what()== "what1"); TEST_ASSERT(r.base_file_name()=="base1"); TEST_ASSERT(r.file_name()=="file1"); TEST_ASSERT(r.line()==2); } Logging_Config::unregister_logger(dummy_logger); TEST_ASSERT(dummy_logger->is_closed()==0); TEST_ASSERT(dummy_logger->records().size()==4); TEST_ASSERT(dummy_logger->records()[3].type()==TYPE_LOG_CLOSE); Logging_Facility::log(LEVEL_DEBUG,TYPE_TRACE_BINARY,0,"what2","base2","file2",3); TEST_ASSERT(dummy_logger->records().size()==4); } void log_1024_1024(Test_Data & data) { for(int i=0;i<1024*1024;++i) DIAGNOSTICS_BASE_LOG(LEVEL_PROD,TYPE_TRACE,0,"xxxYY"); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(®ister_send_unregister,LEVEL_PROD); TEST_NONFCT_CASE(&log_1024_1024,30); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_implementation.cpp0000644000076500000240000001477711172433106021621 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_implementation.cpp * * $Id: logging_implementation.cpp,v 1.11 2005/06/23 09:54:28 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::internal::Logging_Implementation */ #include #include #include #include #include // for atexit #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; Logging_Implementation::Logging_Implementation() #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 : m_pid(Platform::get_pid()) #endif { #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 Platform::get_time(m_startup_sec,m_startup_usec); if(Platform::get_hostname(m_hostname,m_HOSTNAME_MAX_LEN)) { DIAGNOSTICS_PANIC_LOG_INTERNAL("Error getting hostname -- aborting"); ::std::abort(); } #endif // setting the initial loggers try { set_initial_loggers(m_loggers); } catch(::std::exception & e){ DIAGNOSTICS_PANIC_LOG_INTERNAL (::std::string("Unexpected ::std::exception while calling set_initial_loggers -- aborting: ")+ e.what()); ::std::abort(); } catch(...){ DIAGNOSTICS_PANIC_LOG_INTERNAL("Unexpected Exception while calling set_initial_loggers -- aborting"); ::std::abort(); } // sending initial message ::std::ostringstream what; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 what << "diagnostics startup time " << m_startup_sec << "-" << m_startup_usec; #endif try { log(LEVEL_SYSTEM,TYPE_LOG_OPEN,0,"Starting Logging Framework: "+what.str(),"","",1); } catch(::std::exception & e){ DIAGNOSTICS_PANIC_LOG_INTERNAL (::std::string("Unexpected ::std::exception while sending log_open -- aborting: ")+ e.what()); ::std::abort(); } catch(...){ DIAGNOSTICS_PANIC_LOG_INTERNAL("Unexpected Exception while sending log_open -- aborting"); ::std::abort(); } } Logging_Implementation::~Logging_Implementation() { // sending final message try { log(LEVEL_SYSTEM,TYPE_LOG_CLOSE,0,"Stopping Logging Framework","","",1); } catch(::std::exception & e){ DIAGNOSTICS_PANIC_LOG_INTERNAL (::std::string("Unexpected ::std::exception while sending log_close: ")+ e.what()); } catch(...){ DIAGNOSTICS_PANIC_LOG_INTERNAL("Unexpected Exception while sending log_close"); } // closing loggers Loggers_t::const_iterator current(m_loggers.begin()); Loggers_t::const_iterator const end(m_loggers.end()); for(;current!=end;++current) { try { (*current)->close(); } catch(::std::exception & e){ DIAGNOSTICS_PANIC_LOG_INTERNAL (::std::string("Unexpected ::std::exception while closing logger: ")+ e.what()); } catch(...){ DIAGNOSTICS_PANIC_LOG_INTERNAL("Unexpected Exception while closing logger"); } } // unregistering them all m_loggers.resize(0); } //////////////////////////////////////////////////////////////////////////////// Logging_Implementation* Logging_Implementation::m_instance=NULL; Logging_Implementation* Logging_Implementation::setup_instance() { // registering for deletion at exit -- not clean ::std::atexit(&Logging_Implementation::atexit_handler); return m_instance=new Self; } void Logging_Implementation::atexit_handler() { delete Logging_Implementation::m_instance; } //////////////////////////////////////////////////////////////////////////////// void Logging_Implementation::register_logger(Logger * const logger) { if(logger==NULL) throw Logging_Config_Exception("logger==NULL"); Loggers_t::iterator current(m_loggers.begin()); Loggers_t::iterator const end(m_loggers.end()); for(;current!=end;++current) if(*current==logger) throw Logging_Config_Exception("logger already registered"); // sending initial message ::std::ostringstream what; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 what << "diagnostics startup time " << m_startup_sec << "-" << m_startup_usec; #endif DIAGNOSTICS_RECORD(LEVEL_SYSTEM,TYPE_LOG_OPEN,0,"Starting Logger "+what.str(),"","",0); // if the logger throws for whatever reason, it is not handled here. logger->log(record); m_loggers.push_back(logger); } void Logging_Implementation::unregister_logger(Logger * const logger) { if(logger==NULL) throw Logging_Config_Exception("logger==NULL"); Loggers_t::iterator current(m_loggers.begin()); Loggers_t::iterator const end(m_loggers.end()); for(;current!=end;++current) { if(*current==logger) { m_loggers.erase(current); // logger is unregistered -- afterwards it might throw... DIAGNOSTICS_RECORD(LEVEL_SYSTEM,TYPE_LOG_CLOSE,0,"Stopping Logger","","",0); logger->log(record); return; } } throw Logging_Config_Exception("logger not registered"); } void Logging_Implementation::panic_log(::std::string const & what, char const * const base_file_name, char const * const file_name, int const line) { // if this does not work -- we're done. ::std::cerr << "PANIC LOG: " << what << " [ " << base_file_name << " " << file_name << " " << line << " ]" << ::std::endl; } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_implementation.hpp0000644000076500000240000002016011172433106021605 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_implementation.hpp * * $Id: logging_implementation.hpp,v 1.11 2005/06/23 09:54:28 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Interface of @ref diagnostics::internal::Logging_Implementation */ #ifndef DIAGNOSTICS__FRAME__LOGGING_IMPLEMENTATION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__LOGGING_IMPLEMENTATION_HPP__INCLUDE_GUARD #include // used in the implementation by inlining #include // used in the implementation by value #include // used in the implementation by value #include #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; class AVOID_WARNING_FRIEND; /** * @brief The Implementation of @ref Logging_Config and @ref Logging_Facility * * This class implements both, the config and the facility. * * However, it leaves the mutexing open -- it handled by the the * methods of these two classes directly with the help of the @ref * DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD and @ref * DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED. Thus, this class can * be used by components which live behind the @ref * DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD to log. * * @nosubgrouping */ class Logging_Implementation { //////////////////////////////////////////////////////////////////////////////// /** * @name Singleton Implementation * @{ */ private: typedef Logging_Implementation Self; /** * @brief Initializes the logging framework * * Fetches pid, hostname and startup time from the system. Calls * @ref set_initial_loggers to obtain the initial set of loggers sends * them a @ref TYPE_LOG_OPEN message. * * @throw never -- it aborts on problems after using @ref * DIAGNOSTICS_PANIC_LOG. */ Logging_Implementation(); /** * @brief Shuts the logging framework down * * Sends a @ref TYPE_LOG_CLOSE to all loggers, calls their @ref * Logger::close method and unregisters them. * * @throw never -- it tries to go on and calls @ref * DIAGNOSTICS_PANIC_LOG */ ~Logging_Implementation(); /** * @brief To avoid warning since cstr and dstr are both private. */ friend class AVOID_WARNING_FRIEND; public: /** * @brief Singleton implementation * * It is registering @ref atexit_handler -- however, * I have to check out the phoenix behavior. */ inline static Self* instance(); private: static Self * m_instance; /** * @brief sets up the instance */ static Self* setup_instance(); /** * @brief delete @ref m_instance * * @todo make it clean -- phoenix pattern */ static void atexit_handler(); /* @} */ //////////////////////////////////////////////////////////////////////////////// /** * @name Logging_Facility and Logging_Config support * @{ */ public: /** * @brief panic_log is used inside of the logging framework and by * implementations @ref Logger to generate error messages. * * For the arguments, see @ref log. The effect of calling @ref * panic_log is simple: The arugments are printed via ::std::cerr. * * @throw never -- and if it throws, everything is lost. */ static void panic_log(::std::string const & what, char const * const base_file_name, char const * const file_name, int const line); /** * @brief Construts a @ref Record and sends to each register @ref * Logger. This method is the inner implementation of @ref * Logging_Facility::log. * * It has no try/catch -- that's at the level of @ref * Logging_Facility::log, i.e., a panic_log is wrapped around. The * arguments are identical. * * @throw this method lets the exceptions of the loggers (WHICH * SHOULD NOT OCCUR) pass through */ inline void log(Level_t const level, Type_t const type, int const nr_what, ::std::string const & str_what, char const * const base_file_name, char const * const file_name, int const line); /** * @brief Implementation of @ref Logging_Config::register_logger * * Specs are identical. -- mutexing is handled in the surrounding context */ void register_logger(Logger * const logger); /** * @brief Implementation of @ref Logging_Config::register_logger * * Specs are identical. -- mutexing is handled in the surrounding context */ void unregister_logger(Logger * const logger); /* @} */ //////////////////////////////////////////////////////////////////////////////// /** * @name State * @{ */ private: typedef ::std::vector Loggers_t; /* * @brief the registered loggers. */ Loggers_t m_loggers; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 /* * @brief process id of the process */ Pid_t m_pid; static int const m_HOSTNAME_MAX_LEN=512; /* * @brief hostname where the process is running */ char m_hostname[m_HOSTNAME_MAX_LEN]; /* * @brief time when the singleton is constructed */ Sec_t m_startup_sec; Usec_t m_startup_usec; #endif // @} }; //////////////////////////////////////////////////////////////////////////////// Logging_Implementation* Logging_Implementation::instance() { if(m_instance!=NULL) return m_instance; return setup_instance(); } //////////////////////////////////////////////////////////////////////////////// #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # define DIAGNOSTICS_RECORD(level,type,nr_what,str_what,base_file_name,file_name,line) \ Sec_t sec; \ Usec_t usec; \ Platform::get_time(sec,usec); \ Record record(level,type,nr_what,str_what,base_file_name,file_name,line, \ m_pid,Platform::get_tid(),sec,usec,m_hostname) #else # define DIAGNOSTICS_RECORD(level,type,nr_what,str_what,base_file_name,file_name,line) \ Record record(level,type,nr_what,str_what,base_file_name,file_name,line) #endif void Logging_Implementation::log(Level_t const level, Type_t const type, int const nr_what, ::std::string const & str_what, char const * const base_file_name, char const * const file_name, int const line) { DIAGNOSTICS_RECORD(level,type,nr_what,str_what,base_file_name,file_name,line); Loggers_t::iterator current(m_loggers.begin()); Loggers_t::iterator const end(m_loggers.end()); for(;current!=end;++current) (*current)->log(record); } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; /** * @brief For internal panic logs (i.e., logging behind the @ref * DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD). */ #define DIAGNOSTICS_PANIC_LOG_INTERNAL(WHAT)\ ::DIAGNOSTICS_NAMESPACE::INTERNAL_NAMESPACE::Logging_Implementation::panic_log( \ WHAT, \ DIAGNOSTICS_BASE_FILE, \ __FILE__, \ __LINE__) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_mutex.cpp0000644000076500000240000000501411172433106017716 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_mutex.cpp * * @brief [LEVEL: beta] Implementation of @ref diagnostics::internal::Lock_Guard * * $Id: logging_mutex.cpp,v 1.6 2005/06/23 09:54:29 esdentem Exp $ * * @author Christian Schallhart */ #include //////////////////////////////////////////////////////////////////////////////// // // check for recursion but no mutex // #if DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 3 DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; int Lock_Guard::m_nesting_count=0; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif #if DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE == 1 //////////////////////////////////////////////////////////////////////////////// // // Use ACE for non-recursive, multithreaded solution // # if DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 1 DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; Lock_Guard::Mutex_t * Lock_Guard::m_mutex=NULL; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; # endif //////////////////////////////////////////////////////////////////////////////// // // Use ACE for recursive, multithreaded solution // # if DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 2 DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; Lock_Guard::Mutex_t * Lock_Guard::m_mutex=NULL; int Lock_Guard::m_nesting_count=0; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; # endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/logging_mutex.hpp0000644000076500000240000001150111172433106017721 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/logging_mutex.hpp * * $Id: logging_mutex.hpp,v 1.9 2005/06/23 09:54:29 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] the two macros * @ref DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD * @ref DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED * * These two macros come in four flavors: * * @arg DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 0 : Null-calls * * @arg DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 3 : Nesting is * dectectable, but not mutexing happens. * * @arg DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 1 : Nesting is not * detected, but the calls are mutexed. In particular, nested calls * will result in a deadlock. * * @arg DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 2 : Nesting is * dectectable and the calls are mutexed. * * @test none */ #ifndef DIAGNOSTICS__FRAME__LOGGING_MUTEX_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__LOGGING_MUTEX_HPP__INCLUDE_GUARD #include //////////////////////////////////////////////////////////////////////////////// // // No mutex // #if DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 0 # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(NAME) ((void)0) # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(NAME) false #endif //////////////////////////////////////////////////////////////////////////////// // // check for recursion but no mutex // #if DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 3 DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; class Lock_Guard { private: static int m_nesting_count; public: inline Lock_Guard() { ++m_nesting_count; } inline ~Lock_Guard() { --m_nesting_count;} inline bool nesting() { return m_nesting_count!=1;} }; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(NAME) ::DIAGNOSTICS_NAMESPACE::INTERNAL_NAMESPACE::Lock_Guard NAME # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(NAME) (NAME.nesting()) #endif #if DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE == 1 //////////////////////////////////////////////////////////////////////////////// // // Use ACE for non-recursive, multithreaded solution // # if DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 1 # include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; class Lock_Guard { private: typedef ACE_Thread_Mutex Mutex_t; static Mutex_t *m_mutex; public: inline Lock_Guard() { if(m_mutex==NULL) m_mutex=new Mutex_t(); m_mutex->acquire(); } inline ~Lock_Guard() { m_mutex->release(); } }; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(NAME) ::DIAGNOSTICS_NAMESPACE::INTERNAL_NAMESPACE::Lock_Guard NAME # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(NAME) false # endif //////////////////////////////////////////////////////////////////////////////// // // Use ACE for recursive, multithreaded solution // # if DIAGNOSTICS_INTERNAL_SWITCH_MUTEX == 2 # include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; class Lock_Guard { private: typedef ACE_Recursive_Thread_Mutex Mutex_t; static Mutex_t *m_mutex; static int m_nesting_count; public: inline Lock_Guard() { if(m_mutex==NULL) { m_mutex=new Mutex_t(); m_nesting_count=0; } m_mutex->acquire(); ++m_nesting_count; } inline ~Lock_Guard() { --m_nesting_count; m_mutex->release(); } inline bool nesting() { return m_nesting_count!=1; } }; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(NAME) ::DIAGNOSTICS_NAMESPACE::INTERNAL_NAMESPACE::Lock_Guard NAME # define DIAGNOSTICS_LOGGING_FACILITY_LOCK_IS_NESTED(NAME) (NAME.nesting()) # endif #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/Makefile.am0000644000076500000240000000541011335527772016414 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libframe.la libframe_la_SOURCES = exception.cpp logger.cpp logging_config.cpp logging_config_exception.cpp logging_facility.cpp logging_implementation.cpp logging_mutex.cpp record.cpp std_exception.cpp version.cpp pkginclude_HEADERS = exception.hpp level.hpp logger.hpp logging_config.hpp logging_config_exception.hpp logging_facility.hpp logging_implementation.hpp logging_mutex.hpp namespace.hpp platform.hpp platform_config.hpp pp_config.hpp record.hpp set_initial_loggers.hpp std_exception.hpp type.hpp version.hpp check_PROGRAMS = level logging_config logging_facility record type level_SOURCES = level.t.cpp # add additional objects required to build level here, like # level_LDADD = ../base/libbase.la libbla.la level_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la logging_config_SOURCES = logging_config.t.cpp # add additional objects required to build logging_config here, like # logging_config_LDADD = ../base/libbase.la libbla.la logging_config_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la logging_facility_SOURCES = logging_facility.t.cpp # add additional objects required to build logging_facility here, like # logging_facility_LDADD = ../base/libbase.la libbla.la logging_facility_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la record_SOURCES = record.t.cpp # add additional objects required to build record here, like # record_LDADD = ../base/libbase.la libbla.la record_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la type_SOURCES = type.t.cpp # add additional objects required to build type here, like # type_LDADD = ../base/libbase.la libbla.la type_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_framedir = $(includedir)/diagnostics/frame include_diagnostics_frame_HEADERS = exception.hpp level.hpp logger.hpp logging_config.hpp logging_config_exception.hpp logging_facility.hpp logging_implementation.hpp logging_mutex.hpp namespace.hpp platform.hpp platform_config.hpp pp_config.hpp record.hpp set_initial_loggers.hpp std_exception.hpp type.hpp version.hpp TESTS = level logging_config logging_facility record type diagnostics-0.3.3/diagnostics/frame/Makefile.in0000644000076500000240000010723611567506172016434 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_frame_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am check_PROGRAMS = level$(EXEEXT) logging_config$(EXEEXT) \ logging_facility$(EXEEXT) record$(EXEEXT) type$(EXEEXT) TESTS = level$(EXEEXT) logging_config$(EXEEXT) \ logging_facility$(EXEEXT) record$(EXEEXT) type$(EXEEXT) subdir = diagnostics/frame ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libframe_la_LIBADD = am_libframe_la_OBJECTS = exception.lo logger.lo logging_config.lo \ logging_config_exception.lo logging_facility.lo \ logging_implementation.lo logging_mutex.lo record.lo \ std_exception.lo version.lo libframe_la_OBJECTS = $(am_libframe_la_OBJECTS) am_level_OBJECTS = level.t.$(OBJEXT) level_OBJECTS = $(am_level_OBJECTS) level_DEPENDENCIES = $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_logging_config_OBJECTS = logging_config.t.$(OBJEXT) logging_config_OBJECTS = $(am_logging_config_OBJECTS) logging_config_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_logging_facility_OBJECTS = logging_facility.t.$(OBJEXT) logging_facility_OBJECTS = $(am_logging_facility_OBJECTS) logging_facility_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_record_OBJECTS = record.t.$(OBJEXT) record_OBJECTS = $(am_record_OBJECTS) record_DEPENDENCIES = $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_type_OBJECTS = type.t.$(OBJEXT) type_OBJECTS = $(am_type_OBJECTS) type_DEPENDENCIES = $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libframe_la_SOURCES) $(level_SOURCES) \ $(logging_config_SOURCES) $(logging_facility_SOURCES) \ $(record_SOURCES) $(type_SOURCES) DIST_SOURCES = $(libframe_la_SOURCES) $(level_SOURCES) \ $(logging_config_SOURCES) $(logging_facility_SOURCES) \ $(record_SOURCES) $(type_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_framedir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_frame_HEADERS) $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libframe.la libframe_la_SOURCES = exception.cpp logger.cpp logging_config.cpp logging_config_exception.cpp logging_facility.cpp logging_implementation.cpp logging_mutex.cpp record.cpp std_exception.cpp version.cpp pkginclude_HEADERS = exception.hpp level.hpp logger.hpp logging_config.hpp logging_config_exception.hpp logging_facility.hpp logging_implementation.hpp logging_mutex.hpp namespace.hpp platform.hpp platform_config.hpp pp_config.hpp record.hpp set_initial_loggers.hpp std_exception.hpp type.hpp version.hpp level_SOURCES = level.t.cpp # add additional objects required to build level here, like # level_LDADD = ../base/libbase.la libbla.la level_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la logging_config_SOURCES = logging_config.t.cpp # add additional objects required to build logging_config here, like # logging_config_LDADD = ../base/libbase.la libbla.la logging_config_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la logging_facility_SOURCES = logging_facility.t.cpp # add additional objects required to build logging_facility here, like # logging_facility_LDADD = ../base/libbase.la libbla.la logging_facility_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la record_SOURCES = record.t.cpp # add additional objects required to build record here, like # record_LDADD = ../base/libbase.la libbla.la record_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la type_SOURCES = type.t.cpp # add additional objects required to build type here, like # type_LDADD = ../base/libbase.la libbla.la type_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_framedir = $(includedir)/diagnostics/frame include_diagnostics_frame_HEADERS = exception.hpp level.hpp logger.hpp logging_config.hpp logging_config_exception.hpp logging_facility.hpp logging_implementation.hpp logging_mutex.hpp namespace.hpp platform.hpp platform_config.hpp pp_config.hpp record.hpp set_initial_loggers.hpp std_exception.hpp type.hpp version.hpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/frame/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/frame/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libframe.la: $(libframe_la_OBJECTS) $(libframe_la_DEPENDENCIES) $(CXXLINK) $(libframe_la_OBJECTS) $(libframe_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list level$(EXEEXT): $(level_OBJECTS) $(level_DEPENDENCIES) @rm -f level$(EXEEXT) $(CXXLINK) $(level_OBJECTS) $(level_LDADD) $(LIBS) logging_config$(EXEEXT): $(logging_config_OBJECTS) $(logging_config_DEPENDENCIES) @rm -f logging_config$(EXEEXT) $(CXXLINK) $(logging_config_OBJECTS) $(logging_config_LDADD) $(LIBS) logging_facility$(EXEEXT): $(logging_facility_OBJECTS) $(logging_facility_DEPENDENCIES) @rm -f logging_facility$(EXEEXT) $(CXXLINK) $(logging_facility_OBJECTS) $(logging_facility_LDADD) $(LIBS) record$(EXEEXT): $(record_OBJECTS) $(record_DEPENDENCIES) @rm -f record$(EXEEXT) $(CXXLINK) $(record_OBJECTS) $(record_LDADD) $(LIBS) type$(EXEEXT): $(type_OBJECTS) $(type_DEPENDENCIES) @rm -f type$(EXEEXT) $(CXXLINK) $(type_OBJECTS) $(type_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/level.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logger.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_config.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_config.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_config_exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_facility.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_facility.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_implementation.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_mutex.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/record.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/record.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/std_exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/type.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_frameHEADERS: $(include_diagnostics_frame_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_framedir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_framedir)" @list='$(include_diagnostics_frame_HEADERS)'; test -n "$(include_diagnostics_framedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_framedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_framedir)" || exit $$?; \ done uninstall-include_diagnostics_frameHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_frame_HEADERS)'; test -n "$(include_diagnostics_framedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_framedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_framedir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_framedir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnostics_frameHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_frameHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-include_diagnostics_frameHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgincludeHEADERS install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_frameHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/frame/namespace.hpp0000644000076500000240000000477411172433106017023 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/namespace.hpp * * @brief [LEVEL: beta] The used namespaces as macros: diagnostics, internal and unnamed * * $Id: namespace.hpp,v 1.7 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__FRAME__NAMESPACE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__NAMESPACE_HPP__INCLUDE_GUARD #define DIAGNOSTICS_NAMESPACE diagnostics #define DIAGNOSTICS_NAMESPACE_BEGIN namespace DIAGNOSTICS_NAMESPACE { void dummy_for_semicolon_do_not_use() #define DIAGNOSTICS_NAMESPACE_END } void dummy_for_semicolon_do_not_use() #ifndef INTERNAL_NAMESPACE # define INTERNAL_NAMESPACE internal # define INTERNAL_NAMESPACE_BEGIN namespace INTERNAL_NAMESPACE { void dummy_for_semicolon_do_not_use() # define INTERNAL_NAMESPACE_END } void dummy_for_semicolon_do_not_use() #endif #ifndef UNNAMED_NAMESPACE_BEGIN # define UNNAMED_NAMESPACE_BEGIN namespace { void dummy_for_semicolon_do_not_use() # define UNNAMED_NAMESPACE_END } void dummy_for_semicolon_do_not_use() #endif /** * @brief The root namespace of the diagnostics package */ DIAGNOSTICS_NAMESPACE_BEGIN; /** * @brief Internals of the diagnostics package -- the interfaces * occurring within this namespace are private to the diagnostics * package. */ INTERNAL_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/platform.hpp0000644000076500000240000000454311532671765016724 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/platform.hpp * * $Id: platform.hpp,v 1.8 2005/06/23 09:54:29 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Contains the class @ref diagnostics::Platform * which wraps all system calls (with the execption of the muetexing * logging_mutex.hpp). * * @test none */ #ifndef DIAGNOSTICS__FRAME__PLATFORM_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__PLATFORM_HPP__INCLUDE_GUARD #include #if DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE == 1 # include // for pid_t and ACE_thread_t DIAGNOSTICS_NAMESPACE_BEGIN; typedef pid_t Pid_t; typedef ACE_thread_t Tid_t; typedef long Sec_t; typedef long Usec_t; struct Platform { inline static Pid_t get_pid() { return ACE_OS::getpid(); } inline static ACE_thread_t get_tid() { return ACE_OS::thr_self(); } inline static int get_time(Sec_t & sec, Usec_t & usec) { ACE_Time_Value time(ACE_OS::gettimeofday()); sec=time.sec(); usec=time.usec(); return 0; } inline static int get_hostname(char * const buffer, int const buffer_len) { return ACE_OS::hostname(buffer,buffer_len); } }; DIAGNOSTICS_NAMESPACE_END; #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/platform_config.hpp0000644000076500000240000001424011172433106020225 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/platform_config.hpp * * $Id: platform_config.hpp,v 1.4 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Platform Configuration for the logging * framework: There are several switches: * * @arg @ref DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED * @arg @ref DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED * @arg @ref DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED * @arg @ref DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING * * Based on these swtiches and based on the available platform, this * file determines the which libraries to use and how to use them. * * @test none */ #ifndef DIAGNOSTICS__FRAME__PLATFORM_CONFIG_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__PLATFORM_CONFIG_HPP__INCLUDE_GUARD #include #ifndef WIN32 /** * @brief the following header file is constructed * dynamically and is not available in win32 */ # include #endif //////////////////////////////////////////////////////////////////////////////// // // System Features // /** * @brief Switches for compatibility with Windows * (ignored in non-win32 environments) */ #ifdef WIN32 # ifndef DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED # define DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED 0 # endif # ifndef DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED # define DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED 0 # endif # ifndef DIAGNOSTICS_HAVE_ACE # define DIAGNOSTICS_HAVE_ACE 0 # endif #endif // @} /** * @brief set to 1 to use ACE */ #ifndef DIAGNOSTICS_HAVE_ACE # define DIAGNOSTICS_HAVE_ACE 1 #endif // @} //////////////////////////////////////////////////////////////////////////////// // // Switches and Parameters // /** * @brief set to 1 for memory analysis, i.e., providing primitives * which allow to monitor the memory allocation behavior of the * application. * * On some systems, memory analysis does not work properly. In this * case, use this switch to switch off memory analysis. * * Also, switching on memory analysis might degrade the performance of * @ref ::diagnostics::Logging_Facility::log to a certain degree since * recursive mutexing will be required (if * DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED ==1). */ #ifndef DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED # define DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED 1 #endif /** * @brief set to 1 to check against nested logging, i.e., whehter * there is a recursive call to @ref * ::diagnostics::Logging_Facility::log. This feature requires a * recursive mutex, if @ref DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED * ==1. */ #ifndef DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING # define DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING 1 #endif #if DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING == 0 && DIAGNOSTICS_SWITCH_MEMORY_ANALYSIS_ENABLED == 1 # error Check for nested logging is necessary for memory analysis. #endif /** * @brief set to 1 for platform support, i.e. process, thread, timing, * and host information. */ #ifndef DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED # if DIAGNOSTICS_HAVE_ACE == 1 # define DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE 1 # define DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED 1 # else # define DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED 0 # endif #else # if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # if DIAGNOSTICS_HAVE_ACE == 0 # error some portability library is necessary to support system calls! # endif # endif #endif /** * @brief set to 1 to enable multithreading (require @ref * DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED set to 1) */ #ifndef DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED # if DIAGNOSTICS_HAVE_ACE == 1 # define DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE 1 # define DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED 1 # else # define DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED 0 # endif #else # if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # if DIAGNOSTICS_HAVE_ACE == 0 # error some portability library is necessary to support multithreading! # endif # endif #endif //////////////////////////////////////////////////////////////////////////////// // // Derived Configuration (Features matching up the Switches and Parameters) // #ifndef DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE # define DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE 0 #endif #if DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE == 1 # define _REENTRANT 1 // ACE requires _REENTRANT to be defined #endif #if DIAGNOSTICS_SWITCH_MULTITHREADING_ENABLED == 0 # if DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING == 1 # define DIAGNOSTICS_INTERNAL_SWITCH_MUTEX 3 // recursion check # else # define DIAGNOSTICS_INTERNAL_SWITCH_MUTEX 0 // no mutex # endif #else # if DIAGNOSTICS_SWITCH_CHECK_FOR_NESTING == 1 # define DIAGNOSTICS_INTERNAL_SWITCH_MUTEX 2 // recursive mutex # else # define DIAGNOSTICS_INTERNAL_SWITCH_MUTEX 1 // non-recursive mutex # endif #endif // DIAGNOSTICS_INTERNAL_SWITCH_USE_ACE set to 1 if ACE is used // DIAGNOSTICS_INTERNAL_SWITCH_MUTEX set to 0,1,2,3 for no mutex, // non-recursive mutex, recursive mutex, recursion check (without a // mutex), respectively #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/pp_config.hpp0000644000076500000240000000406011335603763017030 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/pp_config.hpp * * $Id: pp_config.hpp,v 1.3 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] The marcos used to reflect the code -- * compiler dependent configuration: @ref DIAGNOSTICS_BASE_FILE and * @ref DIAGNOSTICS_FUNC_NAME. * * @test none */ #ifndef DIAGNOSTICS__MACROS__PP_CONFIG_HPP__INCLUDE_GUARD #define DIAGNOSTICS__MACROS__PP_CONFIG_HPP__INCLUDE_GUARD /** * @brief Guard for __BASE_FILE__ */ #ifndef __BASE_FILE__ # define __BASE_FILE__ "" #endif /** * @brief The base file of the current preprocessing */ #ifndef DIAGNOSTICS_BASE_FILE # define DIAGNOSTICS_BASE_FILE __BASE_FILE__ #endif /** * @brief Pretty printed function name */ #ifndef DIAGNOSTICS_FUNC_NAME #if defined(__GNUC__) # define DIAGNOSTICS_FUNC_NAME __PRETTY_FUNCTION__ #else # define DIAGNOSTICS_FUNC_NAME __FUNCSIG__ #endif #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/record.cpp0000644000076500000240000001036211172433106016326 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/record.cpp * * $Id: record.cpp,v 1.7 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref diagnostics::Record */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Record::Record(Level_t const level, Type_t const type, int const nr_what, ::std::string const & str_what, char const * const base_file_name, char const * const file_name, int const line #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , Pid_t const pid, Tid_t const tid, Sec_t const sec, Usec_t const usec, char const * const hostname #endif ) : m_level(level), m_type(type), m_nr_what(nr_what), m_str_what(str_what), m_base_file_name(base_file_name), m_file_name(file_name), m_line(line) #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , m_pid(pid), m_tid(tid), m_sec(sec), m_usec(usec), m_hostname(hostname) #endif { } Record::Record(Self const & other) : m_level(other.m_level), m_type(other.m_type), m_nr_what(other.m_nr_what), m_str_what(other.m_str_what), m_base_file_name(other.m_base_file_name), m_file_name(other.m_file_name), m_line(other.m_line) #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , m_pid(other.m_pid), m_tid(other.m_tid), m_sec(other.m_sec), m_usec(other.m_usec), m_hostname(other.m_hostname) #endif { } Record & Record::operator=(Self const & other) { m_level=other.m_level; m_type=other.m_type; m_nr_what=other.m_nr_what; m_str_what=other.m_str_what; m_base_file_name=other.m_base_file_name; m_file_name=other.m_file_name; m_line=other.m_line; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 m_pid=other.m_pid; m_tid=other.m_tid; m_sec=other.m_sec; m_usec=other.m_usec; m_hostname=other.m_hostname; #endif return *this; } bool Record::operator==(Self const & other) const { return m_level==other.m_level && m_type==other.m_type && m_nr_what==other.m_nr_what && m_str_what==other.m_str_what && m_base_file_name==other.m_base_file_name && m_file_name==other.m_file_name && m_line==other.m_line #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 && m_pid==other.m_pid && m_tid==other.m_tid && m_sec==other.m_sec && m_usec==other.m_usec && m_hostname==other.m_hostname #endif ; } DIAGNOSTICS_NAMESPACE_END; ::std::ostream & operator<<(::std::ostream & stream, ::diagnostics::Record const & record) { using namespace ::diagnostics; stream << level_to_string(record.level()) << " " << type_to_string(record.type()) << " " << record.nr_what() << " " << record.str_what() << " [" << record.base_file_name() << " " << record.file_name() << " " << record.line() << "] " #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 << record.pid() << "/" << record.tid() << "/" << record.sec() << "-" << record.usec() << " " << record.hostname() #endif ; return stream; } // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/record.hpp0000644000076500000240000001324711172433106016340 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/record.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Record class * * $Id: record.hpp,v 1.19 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/frame/record.t.cpp */ #ifndef DIAGNOSTICS__FRAME__RECORD_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__RECORD_HPP__INCLUDE_GUARD // used in the interface for system types and compile time switching #include // used in the interface by value #include // used in the interface by value #include // used in the interface by reference #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Record diagnostics/frame/record.hpp * * @brief A Record is constructed for each invocation of @ref * Logging_Facility::log. If @ref DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == * 1 then, in addition to the arguments of the log-method, a Record * has further fields, which contain the hostname, the process id, the * thread id, and a time stamp. * * This class is intentionally kept flat. It is a pure data-carrier * with pretty printing. Also, sub-classing is intentionally a * non-option: It would require the registration of record-types which * would make the start-up of the overall framework a relatively * complex procedure. * * @nosubgrouping */ class Record { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Record Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disallowed Creation * @{ */ private: Record(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief assembly cstr -- copies everything * * @throw never */ Record(Level_t const level, Type_t const type, int const nr_what, ::std::string const & str_what, char const * const base_file_name, char const * const file_name, int const line #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , Pid_t const pid, Tid_t const tid, Sec_t const sec, Usec_t const usec, char const * const hostname #endif ); /** * @brief copy cstr -- copies everything * * @throw never */ Record(Self const &); /** * @throw never */ Self & operator=(Self const &r); /** * @throw never */ bool operator==(Self const &r) const; /** * @throw never */ inline bool operator!=(Self const &r) const { return !operator==(r); } // @} //////////////////////////////////////////////////////////////////////////////// /* * @name Accessors * @{ */ public: inline Level_t level() const { return m_level; } inline Type_t type() const { return m_type; } inline int nr_what() const { return m_nr_what; } inline ::std::string const & str_what() const { return m_str_what; } inline ::std::string const & base_file_name() const { return m_base_file_name; } inline ::std::string const & file_name() const { return m_file_name; } inline int line() const { return m_line; } #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 inline Pid_t pid() const { return m_pid; } inline Tid_t tid() const { return m_tid; } inline Sec_t sec() const { return m_sec; } inline Usec_t usec() const { return m_usec; } inline ::std::string const & hostname() const { return m_hostname; } #endif // *} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated States * @{ */ private: Level_t m_level; Type_t m_type; int m_nr_what; ::std::string m_str_what; ::std::string m_base_file_name; ::std::string m_file_name; int m_line; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 Pid_t m_pid; Tid_t m_tid; Sec_t m_sec; Usec_t m_usec; ::std::string m_hostname; #endif // @} }; DIAGNOSTICS_NAMESPACE_END; ::std::ostream & operator<<(::std::ostream & stream, ::diagnostics::Record const & record); #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/record.t.cpp0000644000076500000240000001327011172433106016571 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/record.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::Record * * $Id: record.t.cpp,v 1.17 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart */ #include #include // used components #include // test support #include #include #define TEST_COMPONENT_NAME Record #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::internal::to_string; /** * @brief two records to play with -- assembly_cstr */ #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # define RECORD_1 \ Record r1(LEVEL_TEST,TYPE_TESTCASE_ENTER,0,"what","base","file",1, \ Dummy_Values_For_Pid::value2,Dummy_Values_For_Tid::value3,4,5,"host") # define RECORD_2 \ Record r2(LEVEL_AUDIT,TYPE_TESTCASE_EXIT,1,"what1","base1","file1",2, \ Dummy_Values_For_Pid::value3,Dummy_Values_For_Tid::value2,5,6,"host1") #else # define RECORD_1 \ Record r1(LEVEL_TEST,TYPE_TESTCASE_ENTER,0,"what","base","file",1) # define RECORD_2 \ Record r2(LEVEL_AUDIT,TYPE_TESTCASE_EXIT,1,"what1","base1","file1",2) #endif /** * @brief two different parameter sets into the assembly cstr (all accessors) */ void assembly_cstr(Test_Data & test_data) { RECORD_1; TEST_ASSERT(r1.level()==LEVEL_TEST); TEST_ASSERT(r1.type()==TYPE_TESTCASE_ENTER); TEST_ASSERT(r1.nr_what()==0); TEST_ASSERT(r1.str_what()=="what"); TEST_ASSERT(r1.base_file_name()=="base"); TEST_ASSERT(r1.file_name()=="file"); TEST_ASSERT(r1.line()==1); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(r1.pid()==Dummy_Values_For_Pid::value2); TEST_ASSERT(r1.tid()==Dummy_Values_For_Tid::value3); TEST_ASSERT(r1.sec()==4); TEST_ASSERT(r1.usec()==5); TEST_ASSERT(r1.hostname()=="host"); #endif //////////////////////////////////////////////////////////////////////////////// RECORD_2; TEST_ASSERT(r2.level()==LEVEL_AUDIT); TEST_ASSERT(r2.type()==TYPE_TESTCASE_EXIT); TEST_ASSERT(r2.nr_what()==1); TEST_ASSERT(r2.str_what()=="what1"); TEST_ASSERT(r2.base_file_name()=="base1"); TEST_ASSERT(r2.file_name()=="file1"); TEST_ASSERT(r2.line()==2); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(r2.pid()==Dummy_Values_For_Pid::value3); TEST_ASSERT(r2.tid()==Dummy_Values_For_Tid::value2); TEST_ASSERT(r2.sec()==5); TEST_ASSERT(r2.usec()==6); TEST_ASSERT(r2.hostname()=="host1"); #endif } /** * @brief two different parameter sets -- output is complete, i.e., * all fields are reflected */ void stream_operator(Test_Data & test_data) { RECORD_1; TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r1))); RECORD_2; TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r2",to_string(r2))); } /** * @brief using the output as reference -- we check the copy cstr and assignment */ void copy_cstr_and_assignment(Test_Data & test_data) { RECORD_1; TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r1))); RECORD_2; TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r2",to_string(r2))); // copy r1->r3 Record r3(r1); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r3))); // copy r2->r4 Record r4(r2); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r2",to_string(r4))); // assign r2->r3 r3=r2; TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r2",to_string(r3))); // assign r1->r4 r3=r2; TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r4))); } /** * @brief r1 and r2 are different.... use that */ void comparison(Test_Data & test_data) { using ::diagnostics::internal::to_string; RECORD_1; RECORD_2; TEST_ASSERT(r1!=r2); Record r3(r1); TEST_ASSERT(r1==r3); TEST_ASSERT(r2!=r3); Record r4(r2); TEST_ASSERT(r2==r4); TEST_ASSERT(r1!=r4); TEST_ASSERT(r3!=r4); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&assembly_cstr,LEVEL_PROD); TEST_NORMAL_CASE(&stream_operator,LEVEL_PROD); TEST_NORMAL_CASE(&comparison,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/set_initial_loggers.hpp0000644000076500000240000000517011172433106021104 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/set_initial_loggers.hpp * * @brief [LEVEL: beta] The @ref diagnostics::set_initial_loggers static hook * * $Id: set_initial_loggers.hpp,v 1.4 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__FRAME__SET_INITIAL_LOGGERS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__SET_INITIAL_LOGGERS_HPP__INCLUDE_GUARD #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; // used in the interface by reference // class Logger; /** @attention The user of this library has to supply a @ref * set_initial_loggers procedure. This procedure is called during the * initialization of the logging framework, which is either triggered * by a call to one method of @ref Logging_Config or by a call to @ref * Logging_Facility::log. The rationale for this construction is that * static initialization might require logging, and thus the framework * must be fed with the correpsonding Loggers. * * @brief Places in @a loggers the initial set of loggers * This methods is to be supplied by the user of this library. * * @attention If a problem occurs, this method can use the @ref * DIAGNOSTICS_PANIC_LOG macro -- but is not allowed to throw. If it * throws, ::std::abotr will be called. * * @throw never */ void set_initial_loggers(::std::vector & loggers); DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/std_exception.cpp0000644000076500000240000000356011172433106017722 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/std_exception.cpp * * $Id: std_exception.cpp,v 1.6 2005/06/23 09:54:18 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Implementation of @ref diagnostics::Std_Exception */ #include DIAGNOSTICS_NAMESPACE_BEGIN; Std_Exception::Std_Exception() { } Std_Exception::Std_Exception(::std::string const & what) : m_what(what) { } Std_Exception::Std_Exception(Std_Exception const & other) : m_what(other.m_what) { } Std_Exception::~Std_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } char const * Std_Exception::what() const DIAGNOSTICS_EXCEPTIONS_THROW_DECL { return m_what.c_str(); } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/std_exception.hpp0000644000076500000240000000706111172433106017727 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/std_exception.hpp * * $Id: std_exception.hpp,v 1.11 2005/06/23 09:54:18 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref diagnostics::Std_Exception middle-class */ #ifndef DIAGNOSTICS__FRAME__STD_EXCEPTION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__STD_EXCEPTION_HPP__INCLUDE_GUARD // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Std_Exception diagnostics/frame/std_exception.hpp * * @brief Middle class for exceptions -- just implementing the what * field and method * * The field is left accessible for manipulation by the * subclasses. The constructors are all protected -- this class is not * instantiated directly. * * @nosubgrouping */ class Std_Exception : public Exception { //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ protected: /** * @brief Empty initialization. * * @post what() == "" * * @throw never */ Std_Exception(); /** * @brief Intialization with @a what * * @post what() == @a what * * @throw never */ explicit Std_Exception(::std::string const & what); /** * @brief Standard Copy Constructor * * @post what() == @a other.what() * * @throw never */ Std_Exception(Std_Exception const & other); public: /** * @brief noop * * @throw never */ virtual ~Std_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation/Assignment * @{ */ private: /** * @brief Is not necessary. And should not be generated -- thus * the assignment is set private is left UNIMPLEMENTED. */ Std_Exception & operator=(Std_Exception const & other); //@} //////////////////////////////////////////////////////////////////////////////// /** * @name Partial Interface Implementation of Exception * @{ */ public: virtual char const * what() const DIAGNOSTICS_EXCEPTIONS_THROW_DECL; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ protected: ::std::string m_what; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/type.hpp0000644000076500000240000001545511172433106016046 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/type.hpp * * @brief [LEVEL: beta] definition of the message and record types: * @ref diagnostics::Type_t * * $Id: type.hpp,v 1.15 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/frame/type.t.cpp */ #ifndef DIAGNOSTICS__FRAME__TYPE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__TYPE_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @brief The message types determine the meaning of a log message. It * has no consequences on format of the fields of a @ref * ::diagnostics::Record -- but it does determine (together with other * parameters) whether is treated as an error-indication by the * unittest framework (see @ref * ::diagnostics::unittest::Test_Run_Result for details). */ typedef enum { /** * Entering a block. What is free to the user. */ TYPE_BLOCK_ENTER=0, /** * Leaving a block -- all values (including file_name, base_file_name and line) * are identical to those of the corresponding TYPE_BLOCK_ENTER. */ TYPE_BLOCK_EXIT=1, /** * Entering and leaving a free procedure. What contians the name of * the method -- and can be use log the invocation parameters in * addition. */ TYPE_PROCEDURE_ENTER=2, /** * Leaving a procedure -- all values (including file_name, base_file_name and line) * are identical to those of the corresponding TYPE_PROCEDURE_ENTER. */ TYPE_PROCEDURE_EXIT=3, /** * Entering and leaving a class method. What contians the name of * the method -- and can be use log the invocation parameters in * addition. */ TYPE_METHOD_ENTER=4, /** * Leaving a method -- all values (including file_name, base_file_name and line) * are identical to those of the corresponding TYPE_METHOD_ENTER. */ TYPE_METHOD_EXIT=5, /** * Human readable trace message. */ TYPE_TRACE=6, /** * Binary readable trace message. */ TYPE_TRACE_BINARY=7, /** * A failed assertion, i.e., a error condition which was not * expected to happen. * * This is always treated as an error by the unittest of * diagnostics (see unittest.hpp) independently of the @ref * Level_t. */ TYPE_FAILED_ASSERTION=8, /** * A failed check, i.e., a error condition which was * expected to happen due to unproper use of a module or due * to external circumstances (e.g. network down). * * Whehter such an event is treated as an error or not by the * unittest of diagnostics (see unittest.hpp) depends on the level * of the event and the current build level (see @ref * unittest::Run_Test_Suite_Traversal). However, if such a message * at level @ref LEVEL_TEST occurs, a test is treated as invalid, * i.e., it was not possible to execute the test to come to a * conclusive result. */ TYPE_FAILED_CHECK=9, /** * An exception occured when none was expected. What described the * unexpected exception. * * Unittest treats this an error, independently of the level. */ TYPE_UNEXPECTED_EXCEPTION=10, /** * An exception occured when another one was expected. The what * * Unittest treats this an error iff it occurs at @ref LEVEL_TEST. */ TYPE_WRONG_EXCEPTION=11, /** * No exception occured when an exception was expected. The what * string describes the expected exception. * * Unittest treats this an error iff it occurs at @ref LEVEL_TEST. */ TYPE_MISSING_EXCEPTION=12, /** * A testcase started. What contains the testcase name. */ TYPE_TESTCASE_ENTER=13, /** * Leaving a testcase -- all values (including file_name, * base_file_name and line) are identical to those of the * corresponding TYPE_TESTCASE_ENTER. */ TYPE_TESTCASE_EXIT=14, /** * Whenever a logger is registered, it first receives a message of * this type at @ref LEVEL_SYSTEM. All fields are blank with the * exception of name, what and line. * * If the logger is one of the initial ones (set by @ref * set_initial_loggers), then name says so, what contains a time * stamp of the start up, and line is equal to 1. * * If the logger is not an initial one, then the name of message * says so, what contains two time stamps (framework activation * and registration) and line is to 0. */ TYPE_LOG_OPEN=15, /** * Whenever a logger is unregistered, it receives beforehand such * a message at @ref LEVEL_SYSTEM. * * The what field inidicates whether the whole framework is * shutting down or whether the logger is unregistered. */ TYPE_LOG_CLOSE=16 } Type_t; /** * @brief The maximum integer value of @ref diagnostics::Type_t */ #define TYPE_MAX TYPE_LOG_CLOSE /** * @brief Returns meaningful string for a record type. If the * type is unkown, i.e., a value not defined in the enum is passed, * "UNKOWN" is returned. * * @throw never throws (not declared for efficiency) */ inline char const * type_to_string(Type_t const type) { char const * const type_map[]= { "block_enter", "block_exit", "procedure_enter", "procedure_exit", "method_enter", "method_exit", "trace", "trace_binary", "failed_assertion", "failed_check", "unexpected_exception", "wrong_exception", "missing_exception", "testcase_enter", "testcase_exit", "log_open", "log_close", "UNKNOWN"}; return (type>TYPE_MAX ? type_map[TYPE_MAX+1] : type_map[type]); } DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/type.t.cpp0000644000076500000240000000407211172433106016274 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/type.t.cpp * * @brief [LEVEL: beta] testing type.hpp * * $Id: type.t.cpp,v 1.10 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #define TEST_COMPONENT_NAMESPACE diagnostics #define TEST_COMPONENT_NAME Type DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; void test_type_to_string(Test_Data & test_data) { ::std::ostringstream stream; for(int i=0;i<=TYPE_MAX+1;++i) stream << type_to_string(static_cast(i)) << ::std::endl; TEST_ASSERT(test_data.compare("all conversions",stream.str())); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&test_type_to_string,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/version.cpp0000644000076500000240000000345011172433106016535 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/version.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::diagnostics_library_version * * $Id: version.cpp,v 1.5 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart */ #include #ifdef HAVE_CONFIG_H # include #else # define DIAGNOSTICS_VERSION "unknown" #endif DIAGNOSTICS_NAMESPACE_BEGIN; char const * diagnostics_library_version(bool const svn_version) { if(svn_version) return "$Id: version.cpp,v 1.5 2005/06/23 09:54:20 esdentem Exp $"; else return DIAGNOSTICS_VERSION; } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/frame/version.hpp0000644000076500000240000000364211172433106016545 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/frame/version.hpp * * @brief [LEVEL: beta] @ref diagnostics::diagnostics_library_version * * $Id: version.hpp,v 1.6 2005/06/23 09:54:20 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__FRAME__VERSION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__FRAME__VERSION_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @brief returns the underlying version of the diagnostic library. * * @param svn_version determines which versioning is used: * svn_version==true gives the cvs-Id of version.cpp. * svn_version==false gives the overall library version. */ char const * diagnostics_library_version(bool const svn_version); DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/instrumentation.hpp0000644000076500000240000000625411172433107017234 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/instrumentation.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] Use-Case: The include file is used in a * main-component (i.e., a component which contains the main() * procedure) to switch on instrumentation analysis. * * @attention: Causes Instrumentation Allocations/Deallocations to be slow! */ #ifndef DIAGNOSTICS__INSTRUMENTATION__INCLUDE_GUARD #define DIAGNOSTICS__INSTRUMENTATION__INCLUDE_GUARD #include // ATTENTION: defined a second time in diagnostics/annotations.hpp #ifndef DIAGNOSTICS_DEBUG__LEVEL__ # define DIAGNOSTICS_DEBUG__LEVEL__ 2 #endif //////////////////////////////////////////////////////////////////////////////// // AUDIT #if DIAGNOSTICS_DEBUG__LEVEL__ > 1 # define DIAGNOSTICS_AUDIT_INSTRUMENT_C_CALL(LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) \ DIAGNOSTICS_BASE_INSTRUMENT_C_CALL(::diagnostics::LEVEL_AUDIT,LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) #else # define DIAGNOSTICS_AUDIT_INSTRUMENT_C_CALL(LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) void do_not_call_this_method_which_is_only_declared_for_a_semicolon(void) #endif //////////////////////////////////////////////////////////////////////////////// // DEBUG #if DIAGNOSTICS_DEBUG__LEVEL__ > 0 # define DIAGNOSTICS_DEBUG_INSTRUMENT_C_CALL(LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) \ DIAGNOSTICS_BASE_INSTRUMENT_C_CALL(::diagnostics::LEVEL_DEBUG,LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) #else # define DIAGNOSTICS_DEBUG_INSTRUMENT_C_CALL(LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) void do_not_call_this_method_which_is_only_declared_for_a_semicolon(void) #endif //////////////////////////////////////////////////////////////////////////////// // PROD #define DIAGNOSTICS_PROD_INSTRUMENT_C_CALL(LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) \ DIAGNOSTICS_BASE_INSTRUMENT_C_CALL(::diagnostics::LEVEL_PROD,LIB_NAME,RETURN_TYPE,PROC,ARGS,THROW,CALL,MESG) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/lib_annotations.hpp0000644000076500000240000006724111172433107017157 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/lib_annotations.hpp * * $Id: lib_front_end.hpp,v 1.18 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Conditional Macros for annotating a * library. This file is meant as a template for a library specific * interface. Copy the this file and replace XXX with the library * name. * * @test diagnostics/macros/lib_front_end.t.cpp */ #ifndef DIAGNOSTICS__LIB_ANNOTATIONS__INCLUDE_GUARD #define DIAGNOSTICS__LIB_ANNOTATIONS__INCLUDE_GUARD #ifndef XXX_DEBUG__LEVEL__ # define XXX_DEBUG__LEVEL__ -1 #endif /** * @brief DEBUG__LEVEL__ tells the test subsystem at which build level * we are. * * This is necessary since the test subsystem gives different verdicts * depending on DEBUG__LEVEL__. For instance, if DEBUG__LEVEL__ is 1 * (LEVEL_DEBUG), then a failed XXX_DEBUG_CHECK is not a failure. But * if DEBUG__LEVEL__ is 0 (LEVEL_PROD), then a failed XXX_DEBUG_CHECK * causes a failure (since it would be never checked at production * level, i.e., should not fail at all). * * If you use diagnostics for several different libraries, then you * have to adjust DEBUG__LEVEL__ manually within each unit test: The * DEBUG__LEVEL__ of a unit test must be identical the build level of * the unit test. E.g., if you are in a unit test of library YYY, then you will use * * define DEBUG__LEVEL__ YYY_DEBUG__LEVEL__ * */ #ifndef DEBUG__LEVEL__ # define DEBUG__LEVEL__ XXX_DEBUG__LEVEL__ #endif #if XXX_DEBUG__LEVEL__ >= 0 # include # include # include # include # include # include #else # define DIAGNOSTICS_RELATION(ARG1, ARG2, ARG3, ARG4, ARG5) ((void)0) #endif #ifndef XXX_INLINE # if XXX_DEBUG__LEVEL__ == 0 # define XXX_INLINE inline # else # define XXX_INLINE # endif #endif #ifndef XXX_BASE_EXCEPTION_TYPE # define XXX_BASE_EXCEPTION_TYPE ::std::exception # include # define XXX_BASE_EXCEPTION_STR_WHAT(EX) (::std::string("EXCEPTION=\"") + "\" WHAT=\"" + (EX).what() + "\"") #endif #ifndef XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY # define XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY 1 #endif #ifndef XXX_FAILED_ASSERT_ACTION # define XXX_FAILED_ASSERT_ACTION(LEVEL,NAME,COND) throw NAME(#COND) #endif #ifndef XXX_FAILED_ASSERT_ACTION1 # define XXX_FAILED_ASSERT_ACTION1(LEVEL,NAME,COND,EXCEP_WHAT) throw NAME(EXCEP_WHAT) #endif #ifndef XXX_FAILED_CHECK_ACTION # define XXX_FAILED_CHECK_ACTION(LEVEL,NAME,COND) throw NAME(#COND) #endif #ifndef XXX_FAILED_CHECK_ACTION1 # define XXX_FAILED_CHECK_ACTION1(LEVEL,NAME,COND,EXCEP_WHAT) throw NAME(EXCEP_WHAT) #endif #ifndef XXX_NR_WHAT_DEFAULT # define XXX_NR_WHAT_DEFAULT 0 #endif //////////////////////////////////////////////////////////////////////////////// // derived config #if XXX_DEBUG__LEVEL__ >= 0 #if XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY == 1 # include #endif #endif #ifndef XXX_BASE_EXCEPTION_STR_WHAT # warning XXX_BASE_EXCEPTION_STR_WHAT not defined #endif //////////////////////////////////////////////////////////////////////////////// // AUDIT #if XXX_DEBUG__LEVEL__ > 1 # define XXX_AUDIT_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_AUDIT,::diagnostics::TYPE_TRACE,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_AUDIT_BINARY_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_AUDIT,::diagnostics::TYPE_TRACE_BINARY,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_AUDIT_TRACE1(NR_WHAT,STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_AUDIT,::diagnostics::TYPE_TRACE,(NR_WHAT),(STR_WHAT)) # define XXX_AUDIT_BINARY_TRACE1(NR_WHAT,STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_AUDIT,::diagnostics::TYPE_TRACE_BINARY,(NR_WHAT),(STR_WHAT)) # define XXX_AUDIT_BLOCK_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_AUDIT_BLOCK_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define XXX_AUDIT_BLOCK_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_AUDIT_PROCEDURE_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define XXX_AUDIT_PROCEDURE_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define XXX_AUDIT_PROCEDURE_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define XXX_AUDIT_METHOD_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define XXX_AUDIT_METHOD_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define XXX_AUDIT_METHOD_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_AUDIT, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) # define XXX_AUDIT_ASSERT(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ XXX_FAILED_ASSERT_ACTION(::diagnostics::LEVEL_AUDIT,NAME,COND)) # define XXX_AUDIT_ASSERT1(NAME,COND,EXCEP_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (EXCEP_WHAT) + "\"",\ (COND),\ XXX_FAILED_ASSERT_ACTION1(::diagnostics::LEVEL_AUDIT,NAME,COND,EXCEP_WHAT)) # define XXX_AUDIT_ASSERT_LOG(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ ((void)0)) # define XXX_AUDIT_ASSERT_LOG1(NAME,COND,EXCEP_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (EXCEP_WHAT) + "\"",\ (COND),\ ((void)0)) # define XXX_AUDIT_CHECK(NAME,COND) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ XXX_FAILED_CHECK_ACTION(::diagnostics::LEVEL_AUDIT,NAME,COND)) # define XXX_AUDIT_CHECK1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ XXX_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_AUDIT,NAME,COND,STR_WHAT)) # define XXX_AUDIT_CLASS_THROWING_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER # define XXX_AUDIT_CLASS_THROWING_INVARIANCE_EXIT \ DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT, \ XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ XXX_BASE_EXCEPTION_TYPE,\ XXX_BASE_EXCEPTION_STR_WHAT) # define XXX_AUDIT_CLASS_INVARIANCE_GUARD DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD # define XXX_AUDIT_CLASS_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER # define XXX_AUDIT_CLASS_INVARIANCE_EXIT DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT # define XXX_AUDIT_CLASS_INVARIANCE_ASSERT DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT # define XXX_AUDIT_EXCEPTIONLESS_BLOCK_ENTER DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER # define XXX_AUDIT_EXCEPTIONLESS_BLOCK_EXIT \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(::diagnostics::LEVEL_AUDIT,\ XXX_NR_WHAT_DEFAULT, \ true,\ XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ XXX_BASE_EXCEPTION_TYPE,\ XXX_BASE_EXCEPTION_STR_WHAT) # define XXX_AUDIT_EXEC(CMD) CMD # define XXX_AUDIT_EXEC_ENTER do { ((void)0) # define XXX_AUDIT_EXEC_EXIT } while(false) #else # define XXX_AUDIT_TRACE(STR_WHAT) ((void)0) # define XXX_AUDIT_BINARY_TRACE(STR_WHAT) ((void)0) # define XXX_AUDIT_TRACE1(NR_WHAT,STR_WHAT) ((void)0) # define XXX_AUDIT_BINARY_TRACE1(NR_WHAT,STR_WHAT) ((void)0) # define XXX_AUDIT_BLOCK_ENTER(STR_WHAT) do { # define XXX_AUDIT_BLOCK_EXIT } while(false) # define XXX_AUDIT_BLOCK_GUARD(STR_WHAT) ((void)0) # define XXX_AUDIT_PROCEDURE_ENTER(STR_WHAT) do { # define XXX_AUDIT_PROCEDURE_EXIT } while(false) # define XXX_AUDIT_PROCEDURE_GUARD(STR_WHAT) ((void)0) # define XXX_AUDIT_METHOD_ENTER(STR_WHAT) do { # define XXX_AUDIT_METHOD_EXIT } while(false) # define XXX_AUDIT_METHOD_GUARD(STR_WHAT) ((void)0) # define XXX_AUDIT_ASSERT(NAME,COND) ((void)0) # define XXX_AUDIT_ASSERT1(NAME,COND,STR_WHAT) ((void)0) # define XXX_AUDIT_ASSERT_LOG(NAME,COND) ((void)0) # define XXX_AUDIT_ASSERT_LOG1(NAME,COND,STR_WHAT) ((void)0) # define XXX_AUDIT_CHECK(NAME,COND) ((void)0) # define XXX_AUDIT_CHECK1(NAME,COND,STR_WHAT) ((void)0) # define XXX_AUDIT_CLASS_THROWING_INVARIANCE_ENTER do { # define XXX_AUDIT_CLASS_THROWING_INVARIANCE_EXIT } while(false) # define XXX_AUDIT_CLASS_INVARIANCE_GUARD ((void)0) # define XXX_AUDIT_CLASS_INVARIANCE_ENTER do { # define XXX_AUDIT_CLASS_INVARIANCE_EXIT } while(false) # define XXX_AUDIT_CLASS_INVARIANCE_ASSERT ((void)0) # define XXX_AUDIT_EXCEPTIONLESS_BLOCK_ENTER do { # define XXX_AUDIT_EXCEPTIONLESS_BLOCK_EXIT } while(false) # define XXX_AUDIT_EXEC(CMD) ((void)0) # define XXX_AUDIT_EXEC_ENTER do { if(false) do { ((void)0) # define XXX_AUDIT_EXEC_EXIT } while(false); } while(false) #endif //////////////////////////////////////////////////////////////////////////////// #if XXX_DEBUG__LEVEL__ > 0 # define XXX_DEBUG_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_DEBUG,::diagnostics::TYPE_TRACE,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_DEBUG_BINARY_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_DEBUG,::diagnostics::TYPE_TRACE_BINARY,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_DEBUG_BLOCK_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_DEBUG_BLOCK_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define XXX_DEBUG_BLOCK_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) # define XXX_DEBUG_PROCEDURE_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) # define XXX_DEBUG_PROCEDURE_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define XXX_DEBUG_PROCEDURE_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) # define XXX_DEBUG_METHOD_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) # define XXX_DEBUG_METHOD_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT # define XXX_DEBUG_METHOD_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_DEBUG, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) # define XXX_DEBUG_ASSERT(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_DEBUG,\ XXX_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ XXX_FAILED_ASSERT_ACTION(::diagnostics::LEVEL_DEBUG,NAME,COND)) # define XXX_DEBUG_ASSERT1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_DEBUG,\ XXX_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ XXX_FAILED_ASSERT_ACTION1(::diagnostics::LEVEL_DEBUG,NAME,COND,STR_WHAT)) # define XXX_DEBUG_CHECK(NAME,COND) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_DEBUG,\ XXX_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ XXX_FAILED_CHECK_ACTION(::diagnostics::LEVEL_DEBUG,NAME,COND)) # define XXX_DEBUG_CHECK1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_DEBUG,\ XXX_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ XXX_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_DEBUG,NAME,COND,STR_WHAT)) # define XXX_DEBUG_CLASS_THROWING_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER # define XXX_DEBUG_CLASS_THROWING_INVARIANCE_EXIT \ DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(::diagnostics::LEVEL_DEBUG,\ XXX_NR_WHAT_DEFAULT, \ XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ XXX_BASE_EXCEPTION_TYPE,\ XXX_BASE_EXCEPTION_STR_WHAT) # define XXX_DEBUG_CLASS_INVARIANCE_GUARD DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD # define XXX_DEBUG_CLASS_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER # define XXX_DEBUG_CLASS_INVARIANCE_EXIT DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT # define XXX_DEBUG_CLASS_INVARIANCE_ASSERT DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT # define XXX_DEBUG_EXCEPTIONLESS_BLOCK_ENTER DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER # define XXX_DEBUG_EXCEPTIONLESS_BLOCK_EXIT \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(::diagnostics::LEVEL_DEBUG,\ XXX_NR_WHAT_DEFAULT, \ true,\ XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ XXX_BASE_EXCEPTION_TYPE,\ XXX_BASE_EXCEPTION_STR_WHAT) # define XXX_DEBUG_EXEC(CMD) CMD # define XXX_DEBUG_EXEC_ENTER do { ((void)0) # define XXX_DEBUG_EXEC_EXIT } while(false) #else # define XXX_DEBUG_TRACE(STR_WHAT) ((void)0) # define XXX_DEBUG_BINARY_TRACE(STR_WHAT) ((void)0) # define XXX_DEBUG_BLOCK_ENTER(STR_WHAT) do { # define XXX_DEBUG_BLOCK_EXIT } while(false) # define XXX_DEBUG_BLOCK_GUARD(STR_WHAT) ((void)0) # define XXX_DEBUG_PROCEDURE_ENTER(STR_WHAT) do { # define XXX_DEBUG_PROCEDURE_EXIT } while(false) # define XXX_DEBUG_PROCEDURE_GUARD(STR_WHAT) ((void)0) # define XXX_DEBUG_METHOD_ENTER(STR_WHAT) do { # define XXX_DEBUG_METHOD_EXIT } while(false) # define XXX_DEBUG_METHOD_GUARD(STR_WHAT) ((void)0) # define XXX_DEBUG_ASSERT(NAME,COND) ((void)0) # define XXX_DEBUG_ASSERT1(NAME,COND,STR_WHAT) ((void)0) # define XXX_DEBUG_CHECK(NAME,COND) ((void)0) # define XXX_DEBUG_CHECK1(NAME,COND,STR_WHAT) ((void)0) # define XXX_DEBUG_CLASS_THROWING_INVARIANCE_ENTER do { # define XXX_DEBUG_CLASS_THROWING_INVARIANCE_EXIT } while(false) # define XXX_DEBUG_CLASS_INVARIANCE_GUARD ((void)0) # define XXX_DEBUG_CLASS_INVARIANCE_ENTER do { # define XXX_DEBUG_CLASS_INVARIANCE_EXIT } while(false) # define XXX_DEBUG_CLASS_INVARIANCE_ASSERT ((void)0) # define XXX_DEBUG_EXCEPTIONLESS_BLOCK_ENTER do { # define XXX_DEBUG_EXCEPTIONLESS_BLOCK_EXIT } while(false) # define XXX_DEBUG_EXEC(CMD) ((void)0) # define XXX_DEBUG_EXEC_ENTER do { if(false) do { ((void)0) # define XXX_DEBUG_EXEC_EXIT } while(false); } while(false) #endif //////////////////////////////////////////////////////////////////////////////// #if XXX_DEBUG__LEVEL__ >= 0 #define XXX_PROD_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) #define XXX_PROD_BINARY_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE_BINARY,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) #define XXX_PROD_TRACE1(NR_WHAT,STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE,(NR_WHAT),(STR_WHAT)) #define XXX_PROD_BINARY_TRACE1(NR_WHAT,STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_TRACE_BINARY,(NR_WHAT),(STR_WHAT)) #define XXX_PROD_BLOCK_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) #define XXX_PROD_BLOCK_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define XXX_PROD_BLOCK_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_BLOCK_ENTER, \ ::diagnostics::TYPE_BLOCK_EXIT,XXX_NR_WHAT_DEFAULT,(STR_WHAT)) #define XXX_PROD_PROCEDURE_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) #define XXX_PROD_PROCEDURE_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define XXX_PROD_PROCEDURE_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_PROCEDURE_ENTER, \ ::diagnostics::TYPE_PROCEDURE_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("PROCEDURE=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) #define XXX_PROD_METHOD_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) #define XXX_PROD_METHOD_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define XXX_PROD_METHOD_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_PROD, \ ::diagnostics::TYPE_METHOD_ENTER, \ ::diagnostics::TYPE_METHOD_EXIT,XXX_NR_WHAT_DEFAULT, \ ::std::string("METHOD=\"" DIAGNOSTICS_FUNC_NAME "\" ") + (STR_WHAT)) #define XXX_PROD_ASSERT(NAME,COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_PROD,\ XXX_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ XXX_FAILED_ASSERT_ACTION(::diagnostics::LEVEL_PROD,NAME,COND)) #define XXX_PROD_ASSERT1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_PROD,\ XXX_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ XXX_FAILED_ASSERT_ACTION1(::diagnostics::LEVEL_PROD,NAME,COND,STR_WHAT)) #define XXX_PROD_CLASS_THROWING_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER #define XXX_PROD_CLASS_THROWING_INVARIANCE_EXIT \ DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(::diagnostics::LEVEL_PROD,\ XXX_NR_WHAT_DEFAULT, \ XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ XXX_BASE_EXCEPTION_TYPE,\ XXX_BASE_EXCEPTION_STR_WHAT) #define XXX_PROD_CLASS_INVARIANCE_GUARD DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD #define XXX_PROD_CLASS_INVARIANCE_ENTER DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER #define XXX_PROD_CLASS_INVARIANCE_EXIT DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT #define XXX_PROD_CLASS_INVARIANCE_ASSERT DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT #define XXX_PROD_EXCEPTIONLESS_BLOCK_ENTER DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER #define XXX_PROD_EXCEPTIONLESS_BLOCK_EXIT \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(::diagnostics::LEVEL_PROD,\ XXX_NR_WHAT_DEFAULT, \ true,\ XXX_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ XXX_BASE_EXCEPTION_TYPE,\ XXX_BASE_EXCEPTION_STR_WHAT) #else # define XXX_PROD_TRACE(STR_WHAT) ((void)0) # define XXX_PROD_BINARY_TRACE(STR_WHAT) ((void)0) # define XXX_PROD_BLOCK_ENTER(STR_WHAT) do { # define XXX_PROD_BLOCK_EXIT } while(false) # define XXX_PROD_BLOCK_GUARD(STR_WHAT) ((void)0) # define XXX_PROD_PROCEDURE_ENTER(STR_WHAT) do { # define XXX_PROD_PROCEDURE_EXIT } while(false) # define XXX_PROD_PROCEDURE_GUARD(STR_WHAT) ((void)0) # define XXX_PROD_METHOD_ENTER(STR_WHAT) do { # define XXX_PROD_METHOD_EXIT } while(false) # define XXX_PROD_METHOD_GUARD(STR_WHAT) ((void)0) # define XXX_PROD_ASSERT(NAME,COND) if( ! ( COND ) ) throw NAME ( #COND ) # define XXX_PROD_ASSERT1(NAME,COND,STR_WHAT) if( ! ( COND ) ) throw NAME ( STR_WHAT ) # define XXX_PROD_CLASS_THROWING_INVARIANCE_ENTER do { # define XXX_PROD_CLASS_THROWING_INVARIANCE_EXIT } while(false) # define XXX_PROD_CLASS_INVARIANCE_GUARD ((void)0) # define XXX_PROD_CLASS_INVARIANCE_ENTER do { # define XXX_PROD_CLASS_INVARIANCE_EXIT } while(false) # define XXX_PROD_CLASS_INVARIANCE_ASSERT ((void)0) # define XXX_PROD_EXCEPTIONLESS_BLOCK_ENTER do { # define XXX_PROD_EXCEPTIONLESS_BLOCK_EXIT } while(false) #endif #if XXX_DEBUG__LEVEL__ > 0 # define XXX_PROD_CHECK(NAME,COND) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_PROD,\ XXX_NR_WHAT_DEFAULT,\ "CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\"",\ (COND),\ XXX_FAILED_CHECK_ACTION(::diagnostics::LEVEL_PROD,NAME,COND)) # define XXX_PROD_CHECK1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_PROD,\ XXX_NR_WHAT_DEFAULT,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ (COND),\ XXX_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_PROD,NAME,COND,STR_WHAT)) #else # define XXX_PROD_CHECK(NAME,COND) \ do { if(!(COND)) { XXX_FAILED_CHECK_ACTION(::diagnostics::LEVEL_PROD,NAME,COND); } } while(false) # define XXX_PROD_CHECK1(NAME,COND,STR_WHAT) \ do { if(!(COND)) { XXX_FAILED_CHECK_ACTION1(::diagnostics::LEVEL_PROD,NAME,COND,STR_WHAT); } } while(false) #endif #define XXX_METHOD_GUARD(STR_WHAT) XXX_AUDIT_METHOD_GUARD(STR_WHAT); XXX_AUDIT_CLASS_INVARIANCE_GUARD #define XXX_AUDIT_ASSERT_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(XXX_AUDIT_ASSERT1,NAME,OP1,REL,OP2) #define XXX_AUDIT_CHECK_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(XXX_AUDIT_CHECK1,NAME,OP1,REL,OP2) #define XXX_DEBUG_ASSERT_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(XXX_DEBUG_ASSERT1,NAME,OP1,REL,OP2) #define XXX_DEBUG_CHECK_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(XXX_DEBUG_CHECK1,NAME,OP1,REL,OP2) #define XXX_PROD_ASSERT_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(XXX_PROD_ASSERT1,NAME,OP1,REL,OP2) #define XXX_PROD_CHECK_RELATION(NAME,OP1,REL,OP2) \ DIAGNOSTICS_RELATION(XXX_PROD_CHECK1,NAME,OP1,REL,OP2) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/lib_annotations.t.cpp0000644000076500000240000000575211172433107017413 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/lib_annotations.t.cpp * * @brief [LEVEL: pre-alpha] testing lib_annotations.hpp * * $Id: lib_front_end.t.cpp,v 1.6 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @todo add testcases */ #include // We use the global build level for the annotations. Usually it is // the other way around, i.e., DEBUG__LEVEL__ is defined as // XXX_DEBUG__LEVEL__. #define XXX_DEBUG__LEVEL__ DEBUG__LEVEL__ // component #include // backdoor #include // used component #include #include // test support #include #include #define TEST_COMPONENT_NAME lib_annotations #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; void test_exec(Test_Data & data) { bool was_here(false); XXX_DEBUG_EXEC(was_here=true); TEST_ASSERT_RELATION(XXX_DEBUG__LEVEL__>=LEVEL_DEBUG,==,was_here); was_here=false; XXX_DEBUG_EXEC_ENTER; was_here=true; XXX_DEBUG_EXEC_EXIT; TEST_ASSERT_RELATION(XXX_DEBUG__LEVEL__>=LEVEL_DEBUG,==,was_here); was_here=false; XXX_AUDIT_EXEC(was_here=true); TEST_ASSERT_RELATION(XXX_DEBUG__LEVEL__>=LEVEL_AUDIT,==,was_here); was_here=false; XXX_AUDIT_EXEC_ENTER; was_here=true; XXX_AUDIT_EXEC_EXIT; TEST_ASSERT_RELATION(XXX_DEBUG__LEVEL__>=LEVEL_AUDIT,==,was_here); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&test_exec,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/0000755000076500000240000000000011567507570014626 500000000000000diagnostics-0.3.3/diagnostics/logger/file_logger.cpp0000644000076500000240000000425111172433104017511 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/file_logger.cpp * * @brief [LEVEL: beta] Implementation of the @ref ::diagnostics::File_Logger class * * $Id: file_logger.cpp,v 1.7 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; File_Logger::~File_Logger() { } File_Logger::File_Logger(::std::string const & file_name) : Stream_Logger(m_file_stream), m_file_stream(file_name.c_str(),::std::ios::app) { if(!m_file_stream.good()) throw Logging_Config_Exception("Could not open file '" + file_name + "'"); } File_Logger::File_Logger(::std::string const & file_name, ::std::ofstream::openmode const mode) : Stream_Logger(m_file_stream), m_file_stream(file_name.c_str(),mode) { if(!m_file_stream.good()) throw Logging_Config_Exception("Could not open file '" + file_name + "'"); } void File_Logger::close() { m_file_stream.close(); } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/file_logger.hpp0000644000076500000240000000716411172433104017524 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/file_logger.hpp * * @brief [LEVEL: beta] The @ref diagnostics::File_Logger class * * $Id: file_logger.hpp,v 1.12 2005/06/23 09:54:21 esdentem Exp $ * * @test diagnostics/logger/file_logger.t.cpp * * @author Christian Schallhart */ #ifndef DIAGNOSTICS__LOGGER__FILE_LOGGER_HPP__INCLUDE_GUARD #define DIAGNOSTICS__LOGGER__FILE_LOGGER_HPP__INCLUDE_GUARD // used as base class #include // used in the interface by reference #include // used in the implementation by value #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class File_Logger diagnostics/logger/file_logger.hpp * * @brief logs each @ref Record into a file by using the standard * operator<< of @ref Record (this is a functionality of @ref * Stream_Logger). * * @nosubgrouping */ class File_Logger : public Stream_Logger { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef File_Logger Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief noop * * @throw never */ virtual ~File_Logger(); /** * @brief constructs a logger which opens @a file_name and APPENDS * its records into it. * * @throw Logging_Config_Exception if the file cannot be opened successfully. */ File_Logger(::std::string const & file_Name); /** * @brief constructs a logger which opens @a file_name with mode * @a mode and writes its records into it. * * @throw Logging_Config_Exception if the file cannot be opened successfully. */ File_Logger(::std::string const & file_Name, ::std::ofstream::openmode const mode); private: /** * @brief not available */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Overriding of the Implementation of @ref Stream_Logger (@ref Logger Interface) * @{ */ public: /** * @brief closes the file. * * @throw never */ virtual void close(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::ofstream m_file_stream; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/file_logger.t.cpp0000644000076500000240000001201711172433104017752 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/file_logger.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::File_Logger * * $Id: file_logger.t.cpp,v 1.15 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include #include // used components #include #include // test support #include #include #include #define TEST_COMPONENT_NAME File_Logger #define TEST_COMPONENT_NAMESPACE diagnostics /** * @brief two records to play with -- assembly_cstr */ #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # define RECORD_1 \ Record r1(LEVEL_TEST,TYPE_TESTCASE_ENTER,0,"what","base","file",1, \ Dummy_Values_For_Pid::value2,Dummy_Values_For_Tid::value3,4,5,"host") # define RECORD_2 \ Record r2(LEVEL_AUDIT,TYPE_TESTCASE_EXIT,1,"what1","base1","file1",2, \ Dummy_Values_For_Pid::value3,Dummy_Values_For_Tid::value2,5,6,"host1") #else # define RECORD_1 \ Record r1(LEVEL_TEST,TYPE_TESTCASE_ENTER,0,"what","base","file",1) # define RECORD_2 \ Record r2(LEVEL_AUDIT,TYPE_TESTCASE_EXIT,1,"what1","base1","file1",2) #endif #define TEST_FILENAME "test/file_logger.log" DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace ::diagnostics::unittest; void all_methods(Test_Data & data) { using ::diagnostics::internal::to_string; RECORD_1; RECORD_2; int const BUFFER_SIZE(1024); char buffer[BUFFER_SIZE]; // write { // construct with overwrite to ensure independence File_Logger logger(TEST_FILENAME, ::std::ios::out); // log two records logger.log(r1); logger.log(r2); // close logger.close(); } // read { ::std::ifstream logfile(TEST_FILENAME); // the file exists TEST_ASSERT(logfile.good()); // the first line is the first record logfile.getline(buffer,BUFFER_SIZE); TEST_ASSERT(buffer==to_string(r1)); // the second line is the second record logfile.getline(buffer,BUFFER_SIZE); TEST_ASSERT(buffer==to_string(r2)); // check for eof logfile.get(); TEST_ASSERT(logfile.eof()); } // append { File_Logger logger(TEST_FILENAME); // log two records logger.log(r1); logger.log(r2); // close logger.close(); } // read { ::std::ifstream logfile(TEST_FILENAME); // the file exists TEST_ASSERT(logfile.good()); // the first line is the first record logfile.getline(buffer,BUFFER_SIZE); TEST_ASSERT(buffer==to_string(r1)); // the second line is the second record logfile.getline(buffer,BUFFER_SIZE); TEST_ASSERT(buffer==to_string(r2)); // the third line is the first record logfile.getline(buffer,BUFFER_SIZE); TEST_ASSERT(buffer==to_string(r1)); // the fourth line is the second record logfile.getline(buffer,BUFFER_SIZE); TEST_ASSERT(buffer==to_string(r2)); // check for eof logfile.get(); TEST_ASSERT(logfile.eof()); } } void file_does_not_exist(Test_Data & data) { TEST_THROWING_BLOCK_ENTER; File_Logger logger("nonextisting_directory/so_this_file_does_not_exist"); TEST_THROWING_BLOCK_EXIT(Logging_Config_Exception); } void log_1024_1024(Test_Data & data) { RECORD_1; { File_Logger logger(TEST_FILENAME, ::std::ios::out); for(int i=0;i<1024*1024;++i) logger.log(r1); logger.close(); } // clean up File_Logger logger(TEST_FILENAME, ::std::ios::out); logger.log(r1); logger.close(); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&all_methods,LEVEL_PROD); TEST_NORMAL_CASE(&file_does_not_exist,LEVEL_PROD); TEST_NONFCT_CASE(&log_1024_1024,30); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/intending_file_logger.cpp0000644000076500000240000000445311172433104021554 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/intending_file_logger.cpp * * @brief [LEVEL: beta] Implementation of the @ref ::diagnostics::Intending_File_Logger class * * $Id: intending_file_logger.cpp,v 1.4 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; Intending_File_Logger::~Intending_File_Logger() { } Intending_File_Logger::Intending_File_Logger(::std::string const & file_name) : Intending_Stream_Logger(m_file_stream), m_file_stream(file_name.c_str(),::std::ios::app) { if(!m_file_stream.good()) throw Logging_Config_Exception("Could not open file '" + file_name + "'"); } Intending_File_Logger::Intending_File_Logger(::std::string const & file_name, ::std::ofstream::openmode const mode) : Intending_Stream_Logger(m_file_stream), m_file_stream(file_name.c_str(),mode) { if(!m_file_stream.good()) throw Logging_Config_Exception("Could not open file '" + file_name + "'"); } void Intending_File_Logger::close() { m_file_stream.close(); } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/intending_file_logger.hpp0000644000076500000240000000736711172433104021570 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/intending_file_logger.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Intending_File_Logger class * * $Id: intending_file_logger.hpp,v 1.4 2005/06/23 09:54:21 esdentem Exp $ * * @test diagnostics/logger/intending_file_logger.t.cpp * * @author Christian Schallhart */ #ifndef DIAGNOSTICS__LOGGER__INTENDING_FILE_LOGGER_HPP__INCLUDE_GUARD #define DIAGNOSTICS__LOGGER__INTENDING_FILE_LOGGER_HPP__INCLUDE_GUARD // used as base class #include // used in the interface by reference #include // used in the implementation by value #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Intending_File_Logger diagnostics/logger/intending_file_logger.hpp * * @brief logs each @ref Record into a file. The log is intended and * stripped (this is a functionality of @ref Stream_Logger). * * @nosubgrouping */ class Intending_File_Logger : public Intending_Stream_Logger { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Intending_File_Logger Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief noop * * @throw never */ virtual ~Intending_File_Logger(); /** * @brief constructs a logger which opens @a file_name and APPENDS * its records into it. * * @throw Logging_Config_Exception if the file cannot be opened successfully. */ Intending_File_Logger(::std::string const & file_Name); /** * @brief constructs a logger which opens @a file_name with mode * @a mode and writes its records into it. * * @throw Logging_Config_Exception if the file cannot be opened successfully. */ Intending_File_Logger(::std::string const & file_Name, ::std::ofstream::openmode const mode); private: /** * @brief not available */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Overriding of the Implementation of @ref Stream_Logger (@ref Logger Interface) * @{ */ public: /** * @brief closes the file. * * @throw never */ virtual void close(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::ofstream m_file_stream; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/intending_stream_logger.cpp0000644000076500000240000000670211172433104022127 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/intending_stream_logger.cpp * * @brief [LEVEL: beta] Implementation of the @ref diagnostics::Intending_Stream_Logger class * * $Id: intending_stream_logger.cpp,v 1.6 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include // for DIAGNOSTICS_PANIC_LOG #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; Intending_Stream_Logger::~Intending_Stream_Logger() { } Intending_Stream_Logger::Intending_Stream_Logger(::std::ostream & stream) : m_stream(stream), m_intend(0) { } void Intending_Stream_Logger::log(Record const & record) { using ::diagnostics::internal::to_string; switch(record.type()){ case TYPE_BLOCK_ENTER: case TYPE_PROCEDURE_ENTER: case TYPE_METHOD_ENTER: case TYPE_TESTCASE_ENTER: for(int i=0;i, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/intending_stream_logger.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Intending_Stream_Logger class * * $Id: intending_stream_logger.hpp,v 1.4 2005/06/23 09:54:21 esdentem Exp $ * * @test diagnostics/logger/intending_stream_logger.t.cpp * * @author Christian Schallhart */ #ifndef DIAGNOSTICS__LOGGER__INTENDING_STREAM_LOGGER_HPP__INCLUDE_GUARD #define DIAGNOSTICS__LOGGER__INTENDING_STREAM_LOGGER_HPP__INCLUDE_GUARD // used as base class #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Intending_Stream_Logger diagnostics/logger/intending_stream_logger.hpp * * @brief logs each @ref Record into a ::std::ostream. Only the level, * type, nr_what and str_what are logged. The records are intended * accordingly under the assumption that only thread is logging. * * @nosubgrouping */ class Intending_Stream_Logger : public Logger { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Intending_Stream_Logger Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief noop * * @throw never */ virtual ~Intending_Stream_Logger(); /** * @brief constructs the logger to write onto @a stream * * @throw never */ explicit Intending_Stream_Logger(::std::ostream & stream); private: /** * @brief not available */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Implementation of the @ref Logger Interface * @{ */ public: /** * @brief write @a record onto the internal stream. In case of an * error @ref DIAGNOSTICS_PANIC_LOG is invoked. * * @throw never */ virtual void log(Record const & record); /** * @brief noop * * @throw never */ virtual void close(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::ostream & m_stream; int m_intend; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/Makefile.am0000644000076500000240000000271111335527772016602 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = liblogger.la liblogger_la_SOURCES = file_logger.cpp intending_file_logger.cpp intending_stream_logger.cpp stream_logger.cpp pkginclude_HEADERS = file_logger.hpp intending_file_logger.hpp intending_stream_logger.hpp stream_logger.hpp check_PROGRAMS = file_logger stream_logger file_logger_SOURCES = file_logger.t.cpp # add additional objects required to build file_logger here, like # file_logger_LDADD = ../base/libbase.la libbla.la file_logger_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la stream_logger_SOURCES = stream_logger.t.cpp # add additional objects required to build stream_logger here, like # stream_logger_LDADD = ../base/libbase.la libbla.la stream_logger_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_loggerdir = $(includedir)/diagnostics/logger include_diagnostics_logger_HEADERS = file_logger.hpp intending_file_logger.hpp intending_stream_logger.hpp stream_logger.hpp TESTS = file_logger stream_logger diagnostics-0.3.3/diagnostics/logger/Makefile.in0000644000076500000240000010061411567506172016612 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_logger_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am check_PROGRAMS = file_logger$(EXEEXT) stream_logger$(EXEEXT) TESTS = file_logger$(EXEEXT) stream_logger$(EXEEXT) subdir = diagnostics/logger ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) liblogger_la_LIBADD = am_liblogger_la_OBJECTS = file_logger.lo intending_file_logger.lo \ intending_stream_logger.lo stream_logger.lo liblogger_la_OBJECTS = $(am_liblogger_la_OBJECTS) am_file_logger_OBJECTS = file_logger.t.$(OBJEXT) file_logger_OBJECTS = $(am_file_logger_OBJECTS) file_logger_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_stream_logger_OBJECTS = stream_logger.t.$(OBJEXT) stream_logger_OBJECTS = $(am_stream_logger_OBJECTS) stream_logger_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(liblogger_la_SOURCES) $(file_logger_SOURCES) \ $(stream_logger_SOURCES) DIST_SOURCES = $(liblogger_la_SOURCES) $(file_logger_SOURCES) \ $(stream_logger_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_loggerdir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_logger_HEADERS) $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = liblogger.la liblogger_la_SOURCES = file_logger.cpp intending_file_logger.cpp intending_stream_logger.cpp stream_logger.cpp pkginclude_HEADERS = file_logger.hpp intending_file_logger.hpp intending_stream_logger.hpp stream_logger.hpp file_logger_SOURCES = file_logger.t.cpp # add additional objects required to build file_logger here, like # file_logger_LDADD = ../base/libbase.la libbla.la file_logger_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la stream_logger_SOURCES = stream_logger.t.cpp # add additional objects required to build stream_logger here, like # stream_logger_LDADD = ../base/libbase.la libbla.la stream_logger_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_loggerdir = $(includedir)/diagnostics/logger include_diagnostics_logger_HEADERS = file_logger.hpp intending_file_logger.hpp intending_stream_logger.hpp stream_logger.hpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/logger/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/logger/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done liblogger.la: $(liblogger_la_OBJECTS) $(liblogger_la_DEPENDENCIES) $(CXXLINK) $(liblogger_la_OBJECTS) $(liblogger_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list file_logger$(EXEEXT): $(file_logger_OBJECTS) $(file_logger_DEPENDENCIES) @rm -f file_logger$(EXEEXT) $(CXXLINK) $(file_logger_OBJECTS) $(file_logger_LDADD) $(LIBS) stream_logger$(EXEEXT): $(stream_logger_OBJECTS) $(stream_logger_DEPENDENCIES) @rm -f stream_logger$(EXEEXT) $(CXXLINK) $(stream_logger_OBJECTS) $(stream_logger_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_logger.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_logger.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/intending_file_logger.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/intending_stream_logger.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_logger.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_logger.t.Po@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_loggerHEADERS: $(include_diagnostics_logger_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_loggerdir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_loggerdir)" @list='$(include_diagnostics_logger_HEADERS)'; test -n "$(include_diagnostics_loggerdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_loggerdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_loggerdir)" || exit $$?; \ done uninstall-include_diagnostics_loggerHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_logger_HEADERS)'; test -n "$(include_diagnostics_loggerdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_loggerdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_loggerdir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_loggerdir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnostics_loggerHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_loggerHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-include_diagnostics_loggerHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgincludeHEADERS install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_loggerHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/logger/stream_logger.cpp0000644000076500000240000000416111172433104020065 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/stream_logger.cpp * * @brief [LEVEL: beta] Implementation of the @ref diagnostics::Stream_Logger class * * $Id: stream_logger.cpp,v 1.10 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include // for DIAGNOSTICS_PANIC_LOG #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; Stream_Logger::~Stream_Logger() { } Stream_Logger::Stream_Logger(::std::ostream & stream) : m_stream(stream) { } void Stream_Logger::log(Record const & record) { using ::diagnostics::internal::to_string; m_stream << record << ::std::endl; if(!m_stream.good()) DIAGNOSTICS_PANIC_LOG("Stream Logger is unable to write record: " + to_string(record)); } void Stream_Logger::close() { } DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/stream_logger.hpp0000644000076500000240000000647511172433104020104 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/stream_logger.hpp * * @brief [LEVEL: beta] The @ref diagnostics::Stream_Logger class * * $Id: stream_logger.hpp,v 1.12 2005/06/23 09:54:21 esdentem Exp $ * * @test diagnostics/logger/stream_logger.t.cpp * * @author Christian Schallhart */ #ifndef DIAGNOSTICS__LOGGER__STREAM_LOGGER_HPP__INCLUDE_GUARD #define DIAGNOSTICS__LOGGER__STREAM_LOGGER_HPP__INCLUDE_GUARD // used as base class #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; /** * @class Stream_Logger diagnostics/logger/stream_logger.hpp * * @brief logs each @ref Record into a ::std::ostream by using the * standard operator<< of @ref Record. * * @nosubgrouping */ class Stream_Logger : public Logger { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Stream_Logger Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief noop * * @throw never */ virtual ~Stream_Logger(); /** * @brief constructs the logger to write onto @a stream * * @throw never */ explicit Stream_Logger(::std::ostream & stream); private: /** * @brief not available */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Implementation of the @ref Logger Interface * @{ */ public: /** * @brief write @a record onto the internal stream by using * operator<<, in case of an error @ref DIAGNOSTICS_PANIC_LOG is * invoked. * * @throw never */ virtual void log(Record const & record); /** * @brief noop * * @throw never */ virtual void close(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::ostream & m_stream; // @} }; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/logger/stream_logger.t.cpp0000644000076500000240000000767411172433104020343 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/logger/stream_logger.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::Stream_Logger * * $Id: stream_logger.t.cpp,v 1.13 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include #include // used components #include #include // test support #include #include #include #include #define TEST_COMPONENT_NAME Stream_Logger #define TEST_COMPONENT_NAMESPACE diagnostics /** * @brief two records to play with -- assembly_cstr */ #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # define RECORD_1 \ Record r1(LEVEL_TEST,TYPE_TESTCASE_ENTER,0,"what","base","file",1, \ Dummy_Values_For_Pid::value2,Dummy_Values_For_Tid::value3,4,5,"host") # define RECORD_2 \ Record r2(LEVEL_AUDIT,TYPE_TESTCASE_EXIT,1,"what1","base1","file1",2, \ Dummy_Values_For_Pid::value3,Dummy_Values_For_Tid::value2,5,6,"host1") #else # define RECORD_1 \ Record r1(LEVEL_TEST,TYPE_TESTCASE_ENTER,0,"what","base","file",1) # define RECORD_2 \ Record r2(LEVEL_AUDIT,TYPE_TESTCASE_EXIT,1,"what1","base1","file1",2) #endif DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace ::diagnostics::unittest; void all_methods(Test_Data & data) { using ::diagnostics::internal::to_string; RECORD_1; RECORD_2; // we assume that the operator<< works as it should. ::std::string const sr1(to_string(r1)+"\n"); ::std::string const sr1r2(to_string(r1)+"\n"+to_string(r2)+"\n"); ::std::ostringstream stream; Stream_Logger logger(stream); // log the first and check logger.log(r1); TEST_ASSERT(sr1==stream.str()); // log the second and check logger.log(r2); TEST_ASSERT(sr1r2==stream.str()); // close and check the stream logger.close(); TEST_ASSERT(sr1r2==stream.str()); // should generate a PANIC LOG ::std::ofstream bugg_stream("this_directory)does)not)exist/and_thus_this_file_cannot_be_opened"); TEST_ASSERT(!bugg_stream.good()); Stream_Logger buggy_logger(bugg_stream); buggy_logger.log(r1); } void log_1024_1024(Test_Data & data) { RECORD_1; ::std::string buffer; buffer.resize(1024*128*256); for(int i=0;i<8;++i) { ::std::ostringstream stream(buffer); Stream_Logger logger(stream); for(int j=0;j<1024*128;++j) logger.log(r1); } } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&all_methods,LEVEL_PROD); TEST_NONFCT_CASE(&log_1024_1024,30); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/0000755000076500000240000000000011567507570014633 500000000000000diagnostics-0.3.3/diagnostics/macros/assert_annotation.hpp0000644000076500000240000000451011172433106021000 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/assert_annotation.hpp * * $Id: assert_annotation.hpp,v 1.9 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref DIAGNOSTICS_BASE_ASSERT * * @test diagnostics/macros/assert_annotation.t.cpp */ #ifndef DIAGNOSTICS__MACROS__ASSERT_ANNOTATION_INCLUDE_GUARD #define DIAGNOSTICS__MACROS__ASSERT_ANNOTATION_INCLUDE_GUARD // DIAGNOSTICS_BASE_LOG #include /** * @brief Stating an Assertion. * * @param LEVEL is the level of the assertion of type @ref diagnostics::Level_t * @param NR_WHAT is a client-specific numerical field. * @param STR_WHAT is a client-specific string field. * @param COND The condition which to be asserted. This condition will * be evaluated exactly once. * * @param ACTION can be statement (not entailed by a semi-colon) which * has to be executed in the case of a failing assertion. */ #define DIAGNOSTICS_BASE_ASSERT(LEVEL,NR_WHAT,STR_WHAT,COND,ACTION) \ do { if(!(COND)) { \ DIAGNOSTICS_BASE_LOG((LEVEL),::diagnostics::TYPE_FAILED_ASSERTION,(NR_WHAT),(STR_WHAT)); \ ACTION; \ } \ } while(false) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/assert_annotation.t.cpp0000644000076500000240000001470211172433106021241 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/assert_annotation.t.cpp * * @brief [LEVEL: beta] testing @ref DIAGNOSTICS_BASE_ASSERT * * $Id: assert_annotation.t.cpp,v 1.10 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include // component #include // used component #include // backdoor #include // test support #include #include #define TEST_COMPONENT_NAME assert_annotation #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; #define AC_THROW(NAME,STR_WHAT) throw NAME(STR_WHAT) #define AC_NOOP ((void)0) void use_assert_throw(bool const succeed, ::std::string const what) { Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); if(succeed) { TEST_EXCEPTIONLESS_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_ASSERT(LEVEL_PROD,0,what,succeed,AC_THROW(Test_Exception,what)); DIAGNOSTICS_BASE_ASSERT(LEVEL_DEBUG,1,what,succeed,AC_THROW(Test_Exception,what)); DIAGNOSTICS_BASE_ASSERT(LEVEL_AUDIT,2,what,succeed,AC_THROW(Test_Exception,what)); DIAGNOSTICS_BASE_ASSERT(LEVEL_TEST,3,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_EXCEPTIONLESS_BLOCK_EXIT; } else { TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_ASSERT(LEVEL_PROD,0,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_ASSERT(LEVEL_DEBUG,1,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_ASSERT(LEVEL_AUDIT,2,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_ASSERT(LEVEL_TEST,3,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); } Logging_Config::unregister_logger(logger); // checking Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; if(!succeed) { TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_FAILED_ASSERTION,0,what); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_FAILED_ASSERTION,1,what); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_FAILED_ASSERTION,2,what); ++current; TEST_ASSERT_RECORD1(LEVEL_TEST,TYPE_FAILED_ASSERTION,3,what); ++current; } TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void use_assert_nothrow(bool const succeed, ::std::string const what) { Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); TEST_EXCEPTIONLESS_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_ASSERT(LEVEL_PROD,0,what,succeed,AC_NOOP); DIAGNOSTICS_BASE_ASSERT(LEVEL_DEBUG,1,what,succeed,AC_NOOP); DIAGNOSTICS_BASE_ASSERT(LEVEL_AUDIT,2,what,succeed,AC_NOOP); DIAGNOSTICS_BASE_ASSERT(LEVEL_TEST,3,what,succeed,AC_NOOP); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_EXCEPTIONLESS_BLOCK_EXIT; Logging_Config::unregister_logger(logger); // checking Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; if(!succeed) { TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_FAILED_ASSERTION,0,what); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_FAILED_ASSERTION,1,what); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_FAILED_ASSERTION,2,what); ++current; TEST_ASSERT_RECORD1(LEVEL_TEST,TYPE_FAILED_ASSERTION,3,what); ++current; } TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void throw_succeed(Test_Data & data) { use_assert_throw(true,"bla"); use_assert_throw(true,"bla1"); } void throw_fail(Test_Data & data) { use_assert_throw(false,"bla"); use_assert_throw(false,"bla1"); } void nothrow_succeed(Test_Data & data) { use_assert_nothrow(true,"bla"); use_assert_nothrow(true,"bla1"); } void nothrow_fail(Test_Data & data) { use_assert_nothrow(false,"bla"); use_assert_nothrow(false,"bla1"); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&throw_succeed,LEVEL_PROD); TEST_NORMAL_CASE(&throw_fail,LEVEL_PROD); TEST_NORMAL_CASE(¬hrow_succeed,LEVEL_PROD); TEST_NORMAL_CASE(¬hrow_fail,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/block_annotation.hpp0000644000076500000240000001061711172433106020576 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/block_annotation.hpp * * $Id: block_annotation.hpp,v 1.9 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] The @ref DIAGNOSTICS_BASE_BLOCK_ENTER and * @ref DIAGNOSTICS_BASE_BLOCK_EXIT macros. * * @test diagnostics/macros/block_annotation.t.cpp */ #ifndef DIAGNOSTICS__MACROS__BLOCK_ANNOTATION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__MACROS__BLOCK_ANNOTATION_HPP__INCLUDE_GUARD // ::diagnostics::logging_facility::log #include // basefile and the like #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @brief helper for enter/exit log-messages. Constructor sends the enter, * destructor sends the exit record. */ template class Block_Guard { public: inline Block_Guard(::std::string const & str_what, char const * const base_file_name, char const * const file_name) : m_str_what(str_what), m_base_file_name(base_file_name), m_file_name(file_name) { ::DIAGNOSTICS_NAMESPACE::Logging_Facility::log (LEVEL, TYPE_ENTER, NR_WHAT, m_str_what, m_base_file_name, m_file_name, LINE); } inline ~Block_Guard() { ::DIAGNOSTICS_NAMESPACE::Logging_Facility::log (LEVEL, TYPE_EXIT, NR_WHAT, m_str_what, m_base_file_name, m_file_name, LINE); } private: ::std::string const m_str_what; char const * const m_base_file_name; char const * const m_file_name; }; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; /** * @brief Sets up block guard. * * @note The line/file/basefile information is taken from the entering position * * @param LEVEL the log level of type @ref diagnostics::Level_t to be * used int the entering/exit messages * @param TYPE_ENTER the type of log-message to be generated when * entering the block (of type @ref diagnostics::Type_t) * @param TYPE_EXIT the type of log-message to be generated when * exiting the block (of type @ref diagnostics::Type_t) * @param NR_WHAT the client specific nr_what field to be used in the * entering/exit log message * @param STR_WHAT the client specific str_what field to be used in * the entering/exit log message * */ #define DIAGNOSTICS_BASE_BLOCK_GUARD(LEVEL,TYPE_ENTER,TYPE_EXIT,NR_WHAT,STR_WHAT) \ ::DIAGNOSTICS_NAMESPACE::INTERNAL_NAMESPACE::Block_Guard< \ (TYPE_ENTER), \ (TYPE_EXIT), \ (LEVEL), \ (NR_WHAT), \ __LINE__ > \ diagnostics__internal__block_guard((STR_WHAT), (DIAGNOSTICS_BASE_FILE), __FILE__) /** * @brief Sets up block enter/exit combination. * * Equivalent to { @ref DIAGNOSTICS_BASE_BLOCK_GUARD(LEVEL,TYPE_ENTER,TYPE_EXIT,NAME,WHAT) { ... } } */ #define DIAGNOSTICS_BASE_BLOCK_ENTER(LEVEL,TYPE_ENTER,TYPE_EXIT,NR_WHAT,STR_WHAT) \ do { DIAGNOSTICS_BASE_BLOCK_GUARD((LEVEL),(TYPE_ENTER),(TYPE_EXIT),(NR_WHAT),(STR_WHAT)); { /** * @brief closes a @ref DIAGNOSTICS_BASE_BLOCK_ENTER. */ #define DIAGNOSTICS_BASE_BLOCK_EXIT } } while(false) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/block_annotation.t.cpp0000644000076500000240000001614211172433106021032 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/block_annotation.t.cpp * * @brief [LEVEL: beta] testing @ref DIAGNOSTICS_BASE_BLOCK_ENTER, * @ref DIAGNOSTICS_BASE_BLOCK_EXIT, and @ref * DIAGNOSTICS_BASE_BLOCK_GUARD * * $Id: block_annotation.t.cpp,v 1.12 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include // component #include // used component #include // backdoor #include // test support #include #include #define TEST_COMPONENT_NAME block_annotation #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; #define AC_THROW(LEVEL,NAME,WHAT) throw NAME(WHAT) #define AC_NOOP(LEVEL,NAME,WHAT) ((void)0) void block_guard(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); TEST_NO_IMPLICIT_LOGGING_ENTER; using ::diagnostics::internal::Block_Guard; { Block_Guard guard("what","base","file"); } { Block_Guard guard("what1","base1","file1"); } { Block_Guard guard("what","base","file"); Block_Guard guard1("what1","base1","file1"); } TEST_NO_IMPLICIT_LOGGING_EXIT; Logging_Config::unregister_logger(logger); // checking Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT_RECORD(LEVEL_PROD,TYPE_TRACE,0,"what","base","file",1); ++current; TEST_ASSERT_RECORD(LEVEL_PROD,TYPE_TRACE_BINARY,0,"what","base","file",1); ++current; TEST_ASSERT_RECORD(LEVEL_DEBUG,TYPE_BLOCK_ENTER,1,"what1","base1","file1",2); ++current; TEST_ASSERT_RECORD(LEVEL_DEBUG,TYPE_BLOCK_EXIT,1,"what1","base1","file1",2); ++current; TEST_ASSERT_RECORD(LEVEL_PROD,TYPE_TRACE,2,"what","base","file",1); ++current; TEST_ASSERT_RECORD(LEVEL_DEBUG,TYPE_BLOCK_ENTER,3,"what1","base1","file1",2); ++current; TEST_ASSERT_RECORD(LEVEL_DEBUG,TYPE_BLOCK_EXIT,3,"what1","base1","file1",2); ++current; TEST_ASSERT_RECORD(LEVEL_PROD,TYPE_TRACE_BINARY,2,"what","base","file",1); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void block_guard_macro(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); TEST_NO_IMPLICIT_LOGGING_ENTER; using ::diagnostics::internal::Block_Guard; { DIAGNOSTICS_BASE_BLOCK_GUARD(LEVEL_PROD,TYPE_TRACE,TYPE_TRACE_BINARY,10,"what"); } { DIAGNOSTICS_BASE_BLOCK_GUARD(LEVEL_DEBUG,TYPE_BLOCK_ENTER,TYPE_BLOCK_EXIT,1000,"what1"); } { DIAGNOSTICS_BASE_BLOCK_GUARD(LEVEL_PROD,TYPE_TRACE,TYPE_TRACE_BINARY,10,"what"); { DIAGNOSTICS_BASE_BLOCK_GUARD(LEVEL_DEBUG,TYPE_BLOCK_ENTER,TYPE_BLOCK_EXIT,1000,"what1"); } } TEST_NO_IMPLICIT_LOGGING_EXIT; Logging_Config::unregister_logger(logger); // checking Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_TRACE,10,"what"); ++current; TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_TRACE_BINARY,10,"what"); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_BLOCK_ENTER,1000,"what1"); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_BLOCK_EXIT,1000,"what1"); ++current; TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_TRACE,10,"what"); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_BLOCK_ENTER,1000,"what1"); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_BLOCK_EXIT,1000,"what1"); ++current; TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_TRACE_BINARY,10,"what"); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void block_enter_exit(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_BLOCK_ENTER(LEVEL_AUDIT,TYPE_BLOCK_ENTER,TYPE_BLOCK_EXIT,10,"what"); DIAGNOSTICS_BASE_BLOCK_ENTER(LEVEL_DEBUG,TYPE_METHOD_ENTER,TYPE_METHOD_EXIT,1000,"what1"); DIAGNOSTICS_BASE_BLOCK_EXIT; DIAGNOSTICS_BASE_BLOCK_EXIT; TEST_NO_IMPLICIT_LOGGING_EXIT; Logging_Config::unregister_logger(logger); // checking Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_BLOCK_ENTER,10,"what"); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_METHOD_ENTER,1000,"what1"); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_METHOD_EXIT,1000,"what1"); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_BLOCK_EXIT,10,"what"); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&block_guard,LEVEL_PROD); TEST_NORMAL_CASE(&block_guard_macro,LEVEL_PROD); TEST_NORMAL_CASE(&block_enter_exit,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/check_annotation.hpp0000644000076500000240000000447011172433106020561 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/check_annotation.hpp * * $Id: check_annotation.hpp,v 1.8 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref DIAGNOSTICS_BASE_CHECK * * @test diagnostics/macros/check_annotation.t.cpp */ #ifndef DIAGNOSTICS__MACROS__CHECK_ANNOTATION_INCLUDE_GUARD #define DIAGNOSTICS__MACROS__CHECK_ANNOTATION_INCLUDE_GUARD // DIAGNOSTICS_BASE_LOG #include /** * @brief Stating a Check. * * @param LEVEL is the level of the assertion of type @ref diagnostics::Level_t * @param NR_WHAT is a client-specific numerical field. * @param STR_WHAT is a client-specific string field. * @param COND The condition which to be asserted. This condition will * be evaluated exactly once. * * @param ACTION can be statement (not entailed by a semi-colon) which * has to be executed in the case of a failing assertion. */ #define DIAGNOSTICS_BASE_CHECK(LEVEL,NR_WHAT,STR_WHAT,COND,ACTION) \ do { if(!(COND)) { \ DIAGNOSTICS_BASE_LOG((LEVEL),::diagnostics::TYPE_FAILED_CHECK,(NR_WHAT),(STR_WHAT)); \ ACTION; \ } \ } while(false) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/check_annotation.t.cpp0000644000076500000240000001460211172433106021014 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/check_annotation.t.cpp * * @brief [LEVEL: beta] testing @ref DIAGNOSTICS_BASE_CHECK * * $Id: check_annotation.t.cpp,v 1.11 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include // component #include // used component #include // backdoor #include // test support #include #include #define TEST_COMPONENT_NAME check_annotation #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; #define AC_THROW(NAME,STR_WHAT) throw NAME(STR_WHAT) #define AC_NOOP ((void)0) void use_check_throw(bool const succeed, ::std::string const what) { Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); if(succeed) { TEST_EXCEPTIONLESS_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_CHECK(LEVEL_PROD,0,what,succeed,AC_THROW(Test_Exception,what)); DIAGNOSTICS_BASE_CHECK(LEVEL_DEBUG,1,what,succeed,AC_THROW(Test_Exception,what)); DIAGNOSTICS_BASE_CHECK(LEVEL_AUDIT,2,what,succeed,AC_THROW(Test_Exception,what)); DIAGNOSTICS_BASE_CHECK(LEVEL_TEST,3,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_EXCEPTIONLESS_BLOCK_EXIT; } else { TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_CHECK(LEVEL_PROD,0,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_CHECK(LEVEL_DEBUG,1,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_CHECK(LEVEL_AUDIT,2,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_CHECK(LEVEL_TEST,3,what,succeed,AC_THROW(Test_Exception,what)); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,what.c_str()); } Logging_Config::unregister_logger(logger); // checking Iter_t current(records.begin()); TEST_CHECK(current->type()==TYPE_LOG_OPEN); ++current; if(!succeed) { TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_FAILED_CHECK,0,what); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_FAILED_CHECK,1,what); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_FAILED_CHECK,2,what); ++current; TEST_ASSERT_RECORD1(LEVEL_TEST,TYPE_FAILED_CHECK,3,what); ++current; } TEST_CHECK(current->type()==TYPE_LOG_CLOSE); TEST_CHECK(current+1==records.end()); delete logger; } void use_check_nothrow(bool const succeed, ::std::string const what) { Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); TEST_EXCEPTIONLESS_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_BASE_CHECK(LEVEL_PROD,0,what,succeed,AC_NOOP); DIAGNOSTICS_BASE_CHECK(LEVEL_DEBUG,1,what,succeed,AC_NOOP); DIAGNOSTICS_BASE_CHECK(LEVEL_AUDIT,2,what,succeed,AC_NOOP); DIAGNOSTICS_BASE_CHECK(LEVEL_TEST,3,what,succeed,AC_NOOP); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_EXCEPTIONLESS_BLOCK_EXIT; Logging_Config::unregister_logger(logger); // checking Iter_t current(records.begin()); TEST_CHECK(current->type()==TYPE_LOG_OPEN); ++current; if(!succeed) { TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_FAILED_CHECK,0,what); ++current; TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_FAILED_CHECK,1,what); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_FAILED_CHECK,2,what); ++current; TEST_ASSERT_RECORD1(LEVEL_TEST,TYPE_FAILED_CHECK,3,what); ++current; } TEST_CHECK(current->type()==TYPE_LOG_CLOSE); TEST_CHECK(current+1==records.end()); delete logger; } void throw_succeed(Test_Data & data) { use_check_throw(true,"bla"); use_check_throw(true,"bla1"); } void throw_fail(Test_Data & data) { use_check_throw(false,"bla"); use_check_throw(false,"bla1"); } void nothrow_succeed(Test_Data & data) { use_check_nothrow(true,"bla"); use_check_nothrow(true,"bla1"); } void nothrow_fail(Test_Data & data) { use_check_nothrow(false,"bla"); use_check_nothrow(false,"bla1"); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&throw_succeed,LEVEL_PROD); TEST_NORMAL_CASE(&throw_fail,LEVEL_PROD); TEST_NORMAL_CASE(¬hrow_succeed,LEVEL_PROD); TEST_NORMAL_CASE(¬hrow_fail,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/exceptionless_block_annotation.hpp0000644000076500000240000001054111172433106023537 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/exceptionless_block_annotation.hpp * * $Id: exceptionless_block_annotation.hpp,v 1.9 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref * DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER and @ref * DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT * * @test diagnostics/macros/exceptionless_block_annotation.t.cpp */ #ifndef DIAGNOSTICS__MACROS__EXCEPTIONLESS_BLOCK_ANNOTATION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__MACROS__EXCEPTIONLESS_BLOCK_ANNOTATION_HPP__INCLUDE_GUARD // ::diagnostics::logging_facility::log #include // DIAGNOSTICS_BASE_CONCAT #include /** * @brief opens a @ref DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT */ #define DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER \ do { \ try { #define DIAGNOSTICS_INTERNAL_EXCEPTIONLESS_HANDLE_TE0(LEVEL,RETHROW,NR_WHAT) #define DIAGNOSTICS_INTERNAL_EXCEPTIONLESS_HANDLE_TE1(LEVEL,RETHROW,NR_WHAT) \ catch(::diagnostics::unittest::Test_Exception & e) { \ DIAGNOSTICS_BASE_LOG(LEVEL,::diagnostics::TYPE_UNEXPECTED_EXCEPTION,(NR_WHAT), \ (::std::string("EXCEPTION=\"") \ + e.name() \ + "\" WHAT=\"" \ + e.what() \ + "\"")); \ if(RETHROW) throw; \ } /** * @brief Closes a block which is supposed not to throw any exception * * If an exception occurs a @ref * diagnostics::TYPE_UNEXPECTED_EXCEPTION record is logged. More * specifically, (@a LEVEL, @ref * diagnostics::TYPE_UNEXPECTED_EXCEPTION, @a NR_WHAT, @a STR_WHAT(e)) * is logged, where e is the occured execption of type @a BASE. If an * occured exception is not of type @a BASE but is of type @ref * diagnostics::unittest::Test_Exception, then name/what fields are * read out (if @a HANDLE_TE_EXLPLICITLY is 1). Otherwise the message * comes with and what="Unkown Exception". If @a RETHROW is true, the * exception is rethrown. * * @param LEVEL of type @ref diagnostics::Level_t is the log-level of all messages to be generated * @param NR_WHAT client specific numerical field * @param RETHROW is true iff a possibly occuring execption should be rethrown (if false it is dropped) * @param HANDLE_TE_EXLPLICITLY is true iff * ::diagnostics::unittest::Test_Exception is to be handled explicitly * (i.e. it is not a sub-type of @a BASE) * @param BASE is the base type of the exception which are could possibly occur * @param STR_WHAT is a macro which takes one argument and should * generate a string. It is used to access the name- and what-field of * an execption and generate a corresponding string for the * log-message */ #define DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL,NR_WHAT,RETHROW,HANDLE_TE_EXLPLICITLY,BASE,STR_WHAT) \ } \ DIAGNOSTICS_BASE_CONCAT(DIAGNOSTICS_INTERNAL_EXCEPTIONLESS_HANDLE_TE,HANDLE_TE_EXLPLICITLY)(LEVEL,RETHROW,NR_WHAT) \ catch(BASE & e) { \ DIAGNOSTICS_BASE_LOG((LEVEL),::diagnostics::TYPE_UNEXPECTED_EXCEPTION,(NR_WHAT),STR_WHAT(e)); \ if(RETHROW) throw; \ } \ catch(...) { \ DIAGNOSTICS_BASE_LOG((LEVEL),::diagnostics::TYPE_UNEXPECTED_EXCEPTION,(NR_WHAT),"Unknown Exception"); \ if(RETHROW) throw; \ } } while(false) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/exceptionless_block_annotation.t.cpp0000644000076500000240000001637311172433106024005 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/exceptionless_block_annotation.t.cpp * * @brief [LEVEL: beta] testing @ref * DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER and @ref * DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT * * $Id: exceptionless_block_annotation.t.cpp,v 1.14 2005/06/23 09:54:21 esdentem Exp $ * * @author Christian Schallhart */ #include // component #include // backdoor #include // used component #include #include // test support #include #include #define TEST_COMPONENT_NAME exceptionless_block_annotation #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; #define STR_WHAT(e) (::std::string("EXCEPTION=\"") + e.name() + "\" WHAT=\"" + e.what() +"\"") #define STR_WHAT_INT(e) (::std::string("EXCEPTION=\"int\" WHAT=\"") + ::diagnostics::internal::to_string(e)+"\"") #define TEST_CASE(EXPLICIT_TE) \ { \ Dummy_Logger * logger=new Dummy_Logger; \ Dummy_Logger::Records_t & records(logger->records()); \ typedef Dummy_Logger::Records_t::iterator Iter_t; \ \ Logging_Config::register_logger(logger); \ \ Iter_t current(records.begin()); \ TEST_ASSERT(current->type()==TYPE_LOG_OPEN); \ ++current; \ \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_PROD,10,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ \ TEST_ASSERT(current==records.end()); \ \ if(rethrow) { \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw Test_Exception("what"); \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_PROD,20,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("what").c_str()); \ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw 5; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_DEBUG,30,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT(int); \ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw 5; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_AUDIT,40,rethrow,EXPLICIT_TE,int,STR_WHAT_INT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT(int); \ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw Test_Exception("what1"); \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_TEST,50,rethrow,EXPLICIT_TE,int,STR_WHAT_INT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("what1").c_str()); \ } \ else { \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw Test_Exception("what"); \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_PROD,20,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw 5; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_DEBUG,30,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw 5; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_AUDIT,40,rethrow,EXPLICIT_TE,int,STR_WHAT_INT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER; \ throw Test_Exception("what1"); \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(LEVEL_TEST,50,rethrow,EXPLICIT_TE,int,STR_WHAT_INT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ } \ Logging_Config::unregister_logger(logger); \ \ current=records.begin(); \ TEST_ASSERT(current->type()==TYPE_LOG_OPEN); \ ++current; \ \ TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_UNEXPECTED_EXCEPTION,20,"EXCEPTION=\"Test_Exception\" WHAT=\"what\""); \ ++current; \ TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_UNEXPECTED_EXCEPTION,30,"Unknown Exception"); \ ++current; \ TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_UNEXPECTED_EXCEPTION,40,"EXCEPTION=\"int\" WHAT=\"5\""); \ ++current; \ if(EXPLICIT_TE==1) \ TEST_ASSERT_RECORD1(LEVEL_TEST,TYPE_UNEXPECTED_EXCEPTION,50,"EXCEPTION=\"Test_Exception\" WHAT=\"what1\""); \ else \ TEST_ASSERT_RECORD1(LEVEL_TEST,TYPE_UNEXPECTED_EXCEPTION,50,"Unknown Exception"); \ ++current; \ \ TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); \ TEST_ASSERT(current+1==records.end()); \ delete logger; \ \ } void no_explicit_te(bool const rethrow) TEST_CASE(0) void explicit_te(bool const rethrow) TEST_CASE(1) void no_explicit_te_rethrow(Test_Data & data) { no_explicit_te(true); } void no_explicit_te_norethrow(Test_Data & data) { no_explicit_te(false); } void explicit_te_rethrow(Test_Data & data) { explicit_te(true); } void explicit_te_norethrow(Test_Data & data) { explicit_te(false); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&no_explicit_te_rethrow,LEVEL_PROD); TEST_NORMAL_CASE(&no_explicit_te_norethrow,LEVEL_PROD); TEST_NORMAL_CASE(&explicit_te_rethrow,LEVEL_PROD); TEST_NORMAL_CASE(&explicit_te_norethrow,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/invariance_annotation.hpp0000644000076500000240000001775211172433106021632 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/invariance_annotation.hpp * * $Id: invariance_annotation.hpp,v 1.12 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER * and @ref DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT, @ref * DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD, and @ref * DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT. * * @test diagnostics/macros/invariance_annotation.t.cpp */ #ifndef DIAGNOSTICS__MACROS__INVARIANCE_ANNOTATION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__MACROS__INVARIANCE_ANNOTATION_HPP__INCLUDE_GUARD // ::diagnostics::logging_facility::log #include // DIAGNOSTICS_BASE_CONCAT #include //////////////////////////////////////////////////////////////////////////////// DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @brief Helper for Class-Invariance Checking. On construction and * description, the invariance is checked. The check is performed by * calling an argumentless void method. This helper is used when the * invariance is allowed to throw. */ template class Class_Invariance_Guard_Throw { public: explicit inline Class_Invariance_Guard_Throw(CLASS const * const object); inline ~Class_Invariance_Guard_Throw(); inline void no_final_check() { m_final_check=false; } private: Class_Invariance_Guard_Throw(Class_Invariance_Guard_Throw const & other); Class_Invariance_Guard_Throw & operator=(Class_Invariance_Guard_Throw const & other); private: CLASS const & m_object; bool m_final_check; }; template Class_Invariance_Guard_Throw::Class_Invariance_Guard_Throw(CLASS const * const object) : m_object(*object), m_final_check(true) { (m_object.m_class_invariance)(); } template Class_Invariance_Guard_Throw::~Class_Invariance_Guard_Throw() { if(m_final_check) (m_object.m_class_invariance)(); } /** * @brief Helper for Class-Invariance Checking. On construction and * description, the invariance is checked. The check is performed by * calling an argumentless void method. */ template class Class_Invariance_Guard { public: explicit inline Class_Invariance_Guard(CLASS const * const object); inline ~Class_Invariance_Guard(); private: Class_Invariance_Guard(Class_Invariance_Guard const & other); Class_Invariance_Guard & operator=(Class_Invariance_Guard const & other); private: CLASS const & m_object; }; template Class_Invariance_Guard::Class_Invariance_Guard(CLASS const * const object) : m_object(*object) { (m_object.m_class_invariance)(); } template Class_Invariance_Guard::~Class_Invariance_Guard() { (m_object.m_class_invariance)(); } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; /** * @brief an invariance block. The type Self must be defined in this * context and has to refer to the current class. Self must have a * public method void Self::m_class_invariance() const. This method * must implement the invariance check. A new block is * opened. Exceptions thrown by the invariance method are handled as * well as possible. * * @attention If the block is left by an exception AND the invariance * throws an exception, then the invariance's exception (if of type @a * BASE) is logged with (@a LEVEL,@ref TYPE_TRACE,@a NAME,@a WHAT), * and is discared afterwards. Execptions of type @ref * diagnostics::unittest::Test_Exception can be handled explicitly -- * all other exceptions are unkown and coresponding message is * generated. The exception of the method is rethrown. This might * lead to counter-intuitive behaviors: Depending on whether an * excpetion is thrown or not by the method, invariance violations * lead to different behaviors. However, since invariance checking is * used for mainly for debuging purposes, and any exception thrown by * an invariance check is accompanied by a corresponding log-message, * which indicates failure anyhow, this is acceptable. BUT IT IS NOT * ACCEPTABLE TO EXPOSE SUCH A BEHAVIOR TO A CLIENT OF A MODULE. * * @attention THIS FEATURE MIGHT BE DELETED IN THE FUTURE */ #define DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER \ do { ::DIAGNOSTICS_NAMESPACE::INTERNAL_NAMESPACE::Class_Invariance_Guard_Throw \ internal__invariance_guard(this); try { #define DIAGNOSTICS_INTERNAL_INVARIANCE_HANDLE_TE1(LEVEL,NR_WHAT) \ catch(::diagnostics::unittest::Test_Exception & e) { \ DIAGNOSTICS_BASE_LOG(LEVEL, \ ::diagnostics::TYPE_TRACE, \ NR_WHAT, \ ::std::string("dropped invariance exception EXCEPTION=\"") \ + e.name() \ + "\" WHAT=\"" \ + e.what() \ + "\""); \ } #define DIAGNOSTICS_INTERNAL_INVARIANCE_HANDLE_TE0(LEVEL,NR_WHAT) #define DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(LEVEL,NR_WHAT,HANDLE_TE_EXLPLICITLY,BASE,STR_WHAT) \ } \ catch(...) { \ internal__invariance_guard.no_final_check(); \ try { \ this->m_class_invariance(); \ } \ DIAGNOSTICS_BASE_CONCAT(DIAGNOSTICS_INTERNAL_INVARIANCE_HANDLE_TE,HANDLE_TE_EXLPLICITLY)((LEVEL),(NR_WHAT)) \ catch(BASE & e) { \ DIAGNOSTICS_BASE_LOG((LEVEL), \ ::diagnostics::TYPE_TRACE, \ (NR_WHAT), \ ::std::string("dropped invariance exception ") \ + STR_WHAT(e)); \ } \ catch(...){ \ DIAGNOSTICS_BASE_LOG((LEVEL), \ ::diagnostics::TYPE_TRACE, \ (NR_WHAT), \ "dropped invariance exception"); \ } \ throw; \ } \ } while(false) /** * @brief an invariance guard. The type Self must be defined in this * context and has to refer to the current class. Self must have a * public method void Self::m_class_invariance() const. This method * must implement the invariance check. A new block is opened. * * @attention if the invariance method throws, the behavior is undefined. */ #define DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD \ ::DIAGNOSTICS_NAMESPACE::INTERNAL_NAMESPACE::Class_Invariance_Guard \ internal__invariance_guard(this) /** * @brief an invariance block. Sets up a @ref * DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD within a new block. * * @attention if the invariance method throws, the behavior is undefined. */ #define DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER \ do { DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD; { /** * @brief end of an invariance block. */ #define DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT \ } } while(false) /** * @brief Assert the current class invariance, i.e., calls the invariance. */ #define DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT (this->m_class_invariance()) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/invariance_annotation.t.cpp0000644000076500000240000003362211442100500022046 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/invariance_annotation.t.cpp * * @brief [LEVEL: beta] testing @ref * DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER and @ref * DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT * * $Id: invariance_annotation.t.cpp,v 1.14 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @todo test @ref DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD and @ref * DIAGNOSTICS_BASE_CLASS_INVARIANCE_ASSERT */ #include // component #include // backdoor #include // used component #include #include // test support #include #include #define TEST_COMPONENT_NAME invariance_annotation #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; #define STR_WHAT(e) (::std::string("EXCEPTION=\"")+e.name()+"\" WHAT=\"" + e.what() + "\"") #define STR_WHAT_INT(e) (::std::string("EXCEPTION=\"int\" WHAT=\"") + ::diagnostics::internal::to_string(e) +"\"") class Dummy_Class_With_Invariance { typedef Dummy_Class_With_Invariance Self; public: Dummy_Class_With_Invariance() : m_class_invariance_called(0), m_throw(false) { } void method_with_guard(bool const t1, bool const t2) { m_class_invariance_called=0; m_throw=t1; ::diagnostics::internal::Class_Invariance_Guard_Throw g(this); m_throw=t2; } void method_with_macros(bool const t1, bool const t2) { m_class_invariance_called=0; m_throw=t1; DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER; m_throw=t2; DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(LEVEL_AUDIT,10,0,::diagnostics::Exception,STR_WHAT); } void method_with_return(bool const t1, bool const t2) { m_class_invariance_called=0; m_throw=t1; DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER; m_throw=t2; return; DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(LEVEL_AUDIT,20,0,::diagnostics::Exception,STR_WHAT); } void method_with_throw_implicit_te(bool const t1, bool const t2) { m_class_invariance_called=0; m_throw=t1; DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER; m_throw=t2; throw Test_Exception("Method throwing"); DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(LEVEL_AUDIT,30,0,::diagnostics::Exception,STR_WHAT); } void method_with_throw_explicit_te(bool const t1, bool const t2) { m_class_invariance_called=0; m_throw=t1; DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER; m_throw=t2; throw Test_Exception("Method throwing"); DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(LEVEL_AUDIT,40,1,int,STR_WHAT_INT); } void method_with_throw_implicit_te_int_as_base(bool const t1, bool const t2) { m_class_invariance_called=0; m_throw=t1; DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER; m_throw=t2; throw Test_Exception("Method throwing"); DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(LEVEL_AUDIT,50,0,int,STR_WHAT_INT); } void m_class_invariance() const { ++m_class_invariance_called; if(m_throw) throw Test_Exception("Invariance throwing"); } int class_invariance_called() const { return m_class_invariance_called; } private: mutable int m_class_invariance_called; bool m_throw; }; void guard(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); Dummy_Class_With_Invariance d; TEST_EXCEPTIONLESS_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_guard(false,false); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_EXCEPTIONLESS_BLOCK_EXIT; TEST_ASSERT(d.class_invariance_called()==2); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_guard(true,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==1); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_guard(false,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); Logging_Config::unregister_logger(logger); // checking for the trace of the dropped exception Iter_t current(records.begin()); // skip LOG_OPEN TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void macros(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); Dummy_Class_With_Invariance d; d.method_with_macros(false,false); TEST_ASSERT(d.class_invariance_called()==2); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_macros(true,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==1); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_macros(false,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); Logging_Config::unregister_logger(logger); // checking for the trace of the dropped exception Iter_t current(records.begin()); // skip LOG_OPEN TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void returning(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); Dummy_Class_With_Invariance d; d.method_with_return(false,false); TEST_ASSERT(d.class_invariance_called()==2); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_return(true,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==1); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_return(false,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); Logging_Config::unregister_logger(logger); // checking for the trace of the dropped exception Iter_t current(records.begin()); // skip LOG_OPEN TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void throw_with_implicit_te(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); Dummy_Class_With_Invariance d; TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_implicit_te(false,false); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Method throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_implicit_te(true,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==1); TEST_ASSERT(records.size()==1); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_implicit_te(false,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Method throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); Logging_Config::unregister_logger(logger); Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_TRACE,30,"dropped invariance exception " "EXCEPTION=\"Test_Exception\" WHAT=\"Invariance throwing\""); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void throw_with_explicit_te(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); Dummy_Class_With_Invariance d; TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_explicit_te(false,false); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Method throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_explicit_te(true,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==1); TEST_ASSERT(records.size()==1); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_explicit_te(false,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Method throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); Logging_Config::unregister_logger(logger); Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_TRACE,40,"dropped invariance exception " "EXCEPTION=\"Test_Exception\" WHAT=\"Invariance throwing\""); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } void throw_with_implicit_te_int_as_base(Test_Data & data) { // never mind the leak Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); Dummy_Class_With_Invariance d; TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_implicit_te_int_as_base(false,false); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Method throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_implicit_te_int_as_base(true,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Invariance throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==1); TEST_ASSERT(records.size()==1); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; d.method_with_throw_implicit_te_int_as_base(false,true); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("Method throwing").c_str()); TEST_ASSERT(d.class_invariance_called()==2); Logging_Config::unregister_logger(logger); Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_TRACE,50,"dropped invariance exception"); ++current; TEST_ASSERT(current->type()==TYPE_LOG_CLOSE); TEST_ASSERT(current+1==records.end()); delete logger; } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&guard,LEVEL_PROD); TEST_NORMAL_CASE(¯os,LEVEL_PROD); TEST_NORMAL_CASE(&returning,LEVEL_PROD); TEST_NORMAL_CASE(&throw_with_implicit_te,LEVEL_PROD); TEST_NORMAL_CASE(&throw_with_explicit_te,LEVEL_PROD); TEST_NORMAL_CASE(&throw_with_implicit_te_int_as_base,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/Makefile.am0000644000076500000240000000750511335527772016615 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = pkginclude_HEADERS = assert_annotation.hpp block_annotation.hpp check_annotation.hpp exceptionless_block_annotation.hpp invariance_annotation.hpp relation_modifier.hpp test_front_end.hpp throwing_block_annotation.hpp check_PROGRAMS = assert_annotation block_annotation check_annotation exceptionless_block_annotation invariance_annotation relation_modifier test_front_end throwing_block_annotation assert_annotation_SOURCES = assert_annotation.t.cpp # add additional objects required to build assert_annotation here, like # assert_annotation_LDADD = ../base/libbase.la libbla.la assert_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la block_annotation_SOURCES = block_annotation.t.cpp # add additional objects required to build block_annotation here, like # block_annotation_LDADD = ../base/libbase.la libbla.la block_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la check_annotation_SOURCES = check_annotation.t.cpp # add additional objects required to build check_annotation here, like # check_annotation_LDADD = ../base/libbase.la libbla.la check_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la exceptionless_block_annotation_SOURCES = exceptionless_block_annotation.t.cpp # add additional objects required to build exceptionless_block_annotation here, like # exceptionless_block_annotation_LDADD = ../base/libbase.la libbla.la exceptionless_block_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la invariance_annotation_SOURCES = invariance_annotation.t.cpp # add additional objects required to build invariance_annotation here, like # invariance_annotation_LDADD = ../base/libbase.la libbla.la invariance_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la relation_modifier_SOURCES = relation_modifier.t.cpp # add additional objects required to build relation_modifier here, like # relation_modifier_LDADD = ../base/libbase.la libbla.la relation_modifier_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la test_front_end_SOURCES = test_front_end.t.cpp # add additional objects required to build test_front_end here, like # test_front_end_LDADD = ../base/libbase.la libbla.la test_front_end_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la throwing_block_annotation_SOURCES = throwing_block_annotation.t.cpp # add additional objects required to build throwing_block_annotation here, like # throwing_block_annotation_LDADD = ../base/libbase.la libbla.la throwing_block_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_macrosdir = $(includedir)/diagnostics/macros include_diagnostics_macros_HEADERS = assert_annotation.hpp block_annotation.hpp check_annotation.hpp exceptionless_block_annotation.hpp invariance_annotation.hpp relation_modifier.hpp test_front_end.hpp throwing_block_annotation.hpp TESTS = assert_annotation block_annotation check_annotation exceptionless_block_annotation invariance_annotation relation_modifier test_front_end throwing_block_annotation diagnostics-0.3.3/diagnostics/macros/Makefile.in0000644000076500000240000011360311567506172016621 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_macros_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am check_PROGRAMS = assert_annotation$(EXEEXT) block_annotation$(EXEEXT) \ check_annotation$(EXEEXT) \ exceptionless_block_annotation$(EXEEXT) \ invariance_annotation$(EXEEXT) relation_modifier$(EXEEXT) \ test_front_end$(EXEEXT) throwing_block_annotation$(EXEEXT) TESTS = assert_annotation$(EXEEXT) block_annotation$(EXEEXT) \ check_annotation$(EXEEXT) \ exceptionless_block_annotation$(EXEEXT) \ invariance_annotation$(EXEEXT) relation_modifier$(EXEEXT) \ test_front_end$(EXEEXT) throwing_block_annotation$(EXEEXT) subdir = diagnostics/macros ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am_assert_annotation_OBJECTS = assert_annotation.t.$(OBJEXT) assert_annotation_OBJECTS = $(am_assert_annotation_OBJECTS) assert_annotation_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_block_annotation_OBJECTS = block_annotation.t.$(OBJEXT) block_annotation_OBJECTS = $(am_block_annotation_OBJECTS) block_annotation_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_check_annotation_OBJECTS = check_annotation.t.$(OBJEXT) check_annotation_OBJECTS = $(am_check_annotation_OBJECTS) check_annotation_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_exceptionless_block_annotation_OBJECTS = \ exceptionless_block_annotation.t.$(OBJEXT) exceptionless_block_annotation_OBJECTS = \ $(am_exceptionless_block_annotation_OBJECTS) exceptionless_block_annotation_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_invariance_annotation_OBJECTS = invariance_annotation.t.$(OBJEXT) invariance_annotation_OBJECTS = $(am_invariance_annotation_OBJECTS) invariance_annotation_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_relation_modifier_OBJECTS = relation_modifier.t.$(OBJEXT) relation_modifier_OBJECTS = $(am_relation_modifier_OBJECTS) relation_modifier_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_test_front_end_OBJECTS = test_front_end.t.$(OBJEXT) test_front_end_OBJECTS = $(am_test_front_end_OBJECTS) test_front_end_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la am_throwing_block_annotation_OBJECTS = \ throwing_block_annotation.t.$(OBJEXT) throwing_block_annotation_OBJECTS = \ $(am_throwing_block_annotation_OBJECTS) throwing_block_annotation_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la \ ../util/libutil_ts.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(assert_annotation_SOURCES) $(block_annotation_SOURCES) \ $(check_annotation_SOURCES) \ $(exceptionless_block_annotation_SOURCES) \ $(invariance_annotation_SOURCES) $(relation_modifier_SOURCES) \ $(test_front_end_SOURCES) $(throwing_block_annotation_SOURCES) DIST_SOURCES = $(assert_annotation_SOURCES) \ $(block_annotation_SOURCES) $(check_annotation_SOURCES) \ $(exceptionless_block_annotation_SOURCES) \ $(invariance_annotation_SOURCES) $(relation_modifier_SOURCES) \ $(test_front_end_SOURCES) $(throwing_block_annotation_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_macrosdir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_macros_HEADERS) $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = pkginclude_HEADERS = assert_annotation.hpp block_annotation.hpp check_annotation.hpp exceptionless_block_annotation.hpp invariance_annotation.hpp relation_modifier.hpp test_front_end.hpp throwing_block_annotation.hpp assert_annotation_SOURCES = assert_annotation.t.cpp # add additional objects required to build assert_annotation here, like # assert_annotation_LDADD = ../base/libbase.la libbla.la assert_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la block_annotation_SOURCES = block_annotation.t.cpp # add additional objects required to build block_annotation here, like # block_annotation_LDADD = ../base/libbase.la libbla.la block_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la check_annotation_SOURCES = check_annotation.t.cpp # add additional objects required to build check_annotation here, like # check_annotation_LDADD = ../base/libbase.la libbla.la check_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la exceptionless_block_annotation_SOURCES = exceptionless_block_annotation.t.cpp # add additional objects required to build exceptionless_block_annotation here, like # exceptionless_block_annotation_LDADD = ../base/libbase.la libbla.la exceptionless_block_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la invariance_annotation_SOURCES = invariance_annotation.t.cpp # add additional objects required to build invariance_annotation here, like # invariance_annotation_LDADD = ../base/libbase.la libbla.la invariance_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la relation_modifier_SOURCES = relation_modifier.t.cpp # add additional objects required to build relation_modifier here, like # relation_modifier_LDADD = ../base/libbase.la libbla.la relation_modifier_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la test_front_end_SOURCES = test_front_end.t.cpp # add additional objects required to build test_front_end here, like # test_front_end_LDADD = ../base/libbase.la libbla.la test_front_end_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la throwing_block_annotation_SOURCES = throwing_block_annotation.t.cpp # add additional objects required to build throwing_block_annotation here, like # throwing_block_annotation_LDADD = ../base/libbase.la libbla.la throwing_block_annotation_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_macrosdir = $(includedir)/diagnostics/macros include_diagnostics_macros_HEADERS = assert_annotation.hpp block_annotation.hpp check_annotation.hpp exceptionless_block_annotation.hpp invariance_annotation.hpp relation_modifier.hpp test_front_end.hpp throwing_block_annotation.hpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/macros/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/macros/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list assert_annotation$(EXEEXT): $(assert_annotation_OBJECTS) $(assert_annotation_DEPENDENCIES) @rm -f assert_annotation$(EXEEXT) $(CXXLINK) $(assert_annotation_OBJECTS) $(assert_annotation_LDADD) $(LIBS) block_annotation$(EXEEXT): $(block_annotation_OBJECTS) $(block_annotation_DEPENDENCIES) @rm -f block_annotation$(EXEEXT) $(CXXLINK) $(block_annotation_OBJECTS) $(block_annotation_LDADD) $(LIBS) check_annotation$(EXEEXT): $(check_annotation_OBJECTS) $(check_annotation_DEPENDENCIES) @rm -f check_annotation$(EXEEXT) $(CXXLINK) $(check_annotation_OBJECTS) $(check_annotation_LDADD) $(LIBS) exceptionless_block_annotation$(EXEEXT): $(exceptionless_block_annotation_OBJECTS) $(exceptionless_block_annotation_DEPENDENCIES) @rm -f exceptionless_block_annotation$(EXEEXT) $(CXXLINK) $(exceptionless_block_annotation_OBJECTS) $(exceptionless_block_annotation_LDADD) $(LIBS) invariance_annotation$(EXEEXT): $(invariance_annotation_OBJECTS) $(invariance_annotation_DEPENDENCIES) @rm -f invariance_annotation$(EXEEXT) $(CXXLINK) $(invariance_annotation_OBJECTS) $(invariance_annotation_LDADD) $(LIBS) relation_modifier$(EXEEXT): $(relation_modifier_OBJECTS) $(relation_modifier_DEPENDENCIES) @rm -f relation_modifier$(EXEEXT) $(CXXLINK) $(relation_modifier_OBJECTS) $(relation_modifier_LDADD) $(LIBS) test_front_end$(EXEEXT): $(test_front_end_OBJECTS) $(test_front_end_DEPENDENCIES) @rm -f test_front_end$(EXEEXT) $(CXXLINK) $(test_front_end_OBJECTS) $(test_front_end_LDADD) $(LIBS) throwing_block_annotation$(EXEEXT): $(throwing_block_annotation_OBJECTS) $(throwing_block_annotation_DEPENDENCIES) @rm -f throwing_block_annotation$(EXEEXT) $(CXXLINK) $(throwing_block_annotation_OBJECTS) $(throwing_block_annotation_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/assert_annotation.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/block_annotation.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/check_annotation.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exceptionless_block_annotation.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/invariance_annotation.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/relation_modifier.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_front_end.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/throwing_block_annotation.t.Po@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_macrosHEADERS: $(include_diagnostics_macros_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_macrosdir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_macrosdir)" @list='$(include_diagnostics_macros_HEADERS)'; test -n "$(include_diagnostics_macrosdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_macrosdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_macrosdir)" || exit $$?; \ done uninstall-include_diagnostics_macrosHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_macros_HEADERS)'; test -n "$(include_diagnostics_macrosdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_macrosdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_macrosdir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_macrosdir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnostics_macrosHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_macrosHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool ctags \ ctags-recursive distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am \ install-include_diagnostics_macrosHEADERS install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkgincludeHEADERS install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am \ uninstall-include_diagnostics_macrosHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/macros/relation_modifier.hpp0000644000076500000240000000503211172433106020740 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/relation_modifier.hpp * * $Id: relation_modifier.hpp,v 1.2 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref DIAGNOSTICS_RELATION is used to wrap a * comparision A OP B such that the conctents A and B are logged if * the comparision fails. * * @test diagnostics/macros/relation_modifier.t.cpp */ #ifndef DIAGNOSTICS__MACROS__RELATION_MODIFIER_HPP__INCLUDE_GUARD #define DIAGNOSTICS__MACROS__RELATION_MODIFIER_HPP__INCLUDE_GUARD #include /** * @brief This macro is used to adapt ASSERT and CHECK macros such * that they assert or a relation. If the relation is violated, the * arguments to the comparision are converted to strings and included * into the exception what and the log message. * * @attention be aware, that in case of an error, the two operands OP1 * and OP2 are evaluated THREE TIMES. I consider this a bug---to be * fixed. * * for example: DIAGNOSTICS_RELATION(DIAGNOSTICS_AUDIT_ASSERT1,Test_Exception,min,<=,max); * * This macros is usually wrapped into other macros for the sake of succinctness. */ #define DIAGNOSTICS_RELATION(MACRO,NAME,OP1,REL,OP2) \ MACRO(NAME,\ ((OP1) REL (OP2)), \ "(" #OP1 ")" #REL "(" #OP2 ") EVALUATES TO (" \ + ::diagnostics::internal::to_string((OP1),")",#REL,"(",(OP2),")")) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/relation_modifier.t.cpp0000644000076500000240000001411411172433106021176 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/relation_modifier.t.cpp * * @brief [LEVEL: beta] testing @ref DIAGNOSTICS_RELATION * * $Id: relation_modifier.t.cpp,v 1.2 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @todo add testcases */ #include // component #include // contains the component again -- but also macros required for testing. #include // backdoor #include // used component #include #include // test support #include #include #include #define TEST_COMPONENT_NAME relation_modifier #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; /** * @brief test a success and a failing assert. Check the Exception and * the log message. */ void test_successful_and_failing_assert(Test_Data & data) { Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); int min(0); int max(5); ::std::string const recrod_what_base("CONDITION=\"((min) <= (max))\" EXCEPTION=\"Test_Exception\" WHAT=\""); TEST_ASSERT_RELATION(records.size(),==,1); // no error 0<=5 ////////////////////////////////////////////////// TEST_EXCEPTIONLESS_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_RELATION(DIAGNOSTICS_PROD_ASSERT1,Test_Exception,min,<=,max); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_EXCEPTIONLESS_BLOCK_EXIT; TEST_ASSERT_RELATION(records.size(),==,1); // error: 10<=5 /////////////////////////////////////////////////// min=10; ::std::string const e_10_le_5("(min)<=(max) EVALUATES TO (10)<=(5)"); ::std::string const r_10_le_5(recrod_what_base+e_10_le_5+"\""); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_RELATION(DIAGNOSTICS_PROD_ASSERT1,Test_Exception,min,<=,max); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,e_10_le_5.c_str()); TEST_ASSERT_RELATION(records.size(),==,2); // check all records ////////////////////////////////////////////// Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_FAILED_ASSERTION,0,r_10_le_5); } /** * @brief test the number of evaluations of the arguments in case of * an error. Right now, they are evaluated three times; it should be * once. */ void test_number_of_evaluations(Test_Data & data) { Dummy_Logger * logger=new Dummy_Logger; Dummy_Logger::Records_t & records(logger->records()); typedef Dummy_Logger::Records_t::iterator Iter_t; Logging_Config::register_logger(logger); ::std::string const recrod_what_base("CONDITION=\"((eval1++) <= (eval2++))\" EXCEPTION=\"Test_Exception\" WHAT=\""); int eval1(0); int eval2(5); TEST_ASSERT_RELATION(records.size(),==,1); // no error 0<=5 ////////////////////////////////////////////////// TEST_EXCEPTIONLESS_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_RELATION(DIAGNOSTICS_PROD_ASSERT1,Test_Exception,eval1++,<=,eval2++); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_EXCEPTIONLESS_BLOCK_EXIT; TEST_ASSERT_RELATION(eval1,==,1); TEST_ASSERT_RELATION(eval2,==,6); TEST_ASSERT_RELATION(records.size(),==,1); // error: 10<=5 /////////////////////////////////////////////////// eval1=10; eval2=5; ::std::string const e_10_le_5("(eval1++)<=(eval2++) EVALUATES TO (10)<=(5)"); ::std::string const e_11_le_6("(eval1++)<=(eval2++) EVALUATES TO (11)<=(6)"); ::std::string const e_12_le_7("(eval1++)<=(eval2++) EVALUATES TO (12)<=(7)"); ::std::string const r_11_le_6(recrod_what_base+e_11_le_6+"\""); TEST_THROWING_BLOCK_ENTER; TEST_NO_IMPLICIT_LOGGING_ENTER; DIAGNOSTICS_RELATION(DIAGNOSTICS_PROD_ASSERT1,Test_Exception,eval1++,<=,eval2++); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_THROWING_BLOCK_EXIT1(Test_Exception,e_12_le_7.c_str()); // evaluated TWICE! TEST_ASSERT_RELATION(eval1,==,13); // that's the BUG! -- evaluated THRICE! TEST_ASSERT_RELATION(eval2,==,8); TEST_ASSERT_RELATION(records.size(),==,2); // check all records ////////////////////////////////////////////// Iter_t current(records.begin()); TEST_ASSERT(current->type()==TYPE_LOG_OPEN); ++current; // LOG MSG DIFFERS FROM EXCEPTION WHAT!! TEST_ASSERT_RECORD1(LEVEL_PROD,TYPE_FAILED_ASSERTION,0,r_11_le_6); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&test_successful_and_failing_assert,LEVEL_PROD); TEST_NORMAL_CASE(&test_number_of_evaluations,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/test_front_end.hpp0000644000076500000240000002537311172433106020274 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/test_front_end.hpp * * $Id: test_front_end.hpp,v 1.21 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Macros for testing * * @todo diagnostics/macros/test_front_end.t.hpp */ #ifndef DIAGNOSTICS__MACROS__TEST_FRONT_END_HPP__INCLUDE_GUARD #define DIAGNOSTICS__MACROS__TEST_FRONT_END_HPP__INCLUDE_GUARD #include #include #include #include #include #include #include #include #include //////////////////////////////////////////////////////////////////////////////// // config #ifndef TEST_BASE_EXCEPTION_TYPE # define TEST_BASE_EXCEPTION_TYPE ::diagnostics::Exception # include # define TEST_BASE_EXCEPTION_STR_WHAT(EX) (::std::string("EXCEPTION=\"") + (EX).name() + "\" WHAT=\"" + (EX).what() + "\"") #endif #ifndef TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY # define TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY 0 #endif #ifndef TEST_FAILED_ASSERT_ACTION # define TEST_FAILED_ASSERT_ACTION(NAME,COND) throw NAME(#COND) #endif #ifndef TEST_FAILED_ASSERT_ACTION1 # define TEST_FAILED_ASSERT_ACTION1(NAME,COND,EXCEP_WHAT) throw NAME(EXCEP_WHAT) #endif #ifndef TEST_FAILED_CHECK_ACTION # define TEST_FAILED_CHECK_ACTION(NAME,COND) throw NAME(#COND) #endif #ifndef TEST_FAILED_CHECK_ACTION1 # define TEST_FAILED_CHECK_ACTION1(NAME,COND,EXCEP_WHAT) throw NAME(EXCEP_WHAT) #endif //////////////////////////////////////////////////////////////////////////////// // derived config #if TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY == 1 # include #endif #ifndef TEST_BASE_EXCEPTION_STR_WHAT # warning TEST_BASE_EXCEPTION_STR_WHAT not defined #endif //////////////////////////////////////////////////////////////////////////////// #define TEST_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_TEST, \ ::diagnostics::TYPE_TRACE,0,STR_WHAT) #define TEST_BINARY_TRACE(STR_WHAT) \ DIAGNOSTICS_BASE_LOG(::diagnostics::LEVEL_TEST, \ ::diagnostics::TYPE_TRACE_BINARY,0,STR_WHAT) #define TEST_BLOCK_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_TEST,\ ::diagnostics::TYPE_BLOCK_ENTER,\ ::diagnostics::TYPE_BLOCK_EXIT,\ 0,\ (STR_WHAT)) #define TEST_BLOCK_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define TEST_BLOCK_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_TEST,\ ::diagnostics::TYPE_BLOCK_ENTER,\ ::diagnostics::TYPE_BLOCK_EXIT,\ 0, \ (STR_WHAT)) #define TEST_PROCEDURE_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_TEST,\ ::diagnostics::TYPE_PROCEDURE_ENTER,\ ::diagnostics::TYPE_PROCEDURE_EXIT,\ 0, \ ::std::string("procedure=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) #define TEST_PROCEDURE_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define TEST_PROCEDURE_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_TEST,\ ::diagnostics::TYPE_PROCEDURE_ENTER,\ ::diagnostics::TYPE_PROCEDURE_EXIT,\ 0, \ ::std::string("procedure=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) #define TEST_METHOD_ENTER(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_ENTER(::diagnostics::LEVEL_TEST,\ ::diagnostics::TYPE_METHOD_ENTER,\ ::diagnostics::TYPE_METHOD_EXIT,\ 0, \ ::std::string("method=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) #define TEST_METHOD_EXIT DIAGNOSTICS_BASE_BLOCK_EXIT #define TEST_METHOD_GUARD(STR_WHAT) \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_TEST,\ ::diagnostics::TYPE_METHOD_ENTER,\ ::diagnostics::TYPE_METHOD_EXIT,\ 0, \ ::std::string("method=\"") + DIAGNOSTICS_FUNC_NAME + "\" " + (STR_WHAT)) //////////////////////////////////////////////////////////////////////////////// #define TEST_ASSERT(COND) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_TEST, \ 0,"CONDITION=\"" #COND "\" EXCEPTION=\"" "Test_Exception" "\"",COND,\ TEST_FAILED_ASSERT_ACTION(::diagnostics::unittest::Test_Exception,COND)) #define TEST_ASSERT1(NAME,COND,EXCEP_WHAT) \ DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_TEST, \ 0,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (EXCEP_WHAT) + "\"",\ COND,TEST_FAILED_ASSERT_ACTION1(NAME,COND,EXCEP_WHAT)) #define TEST_CHECK(COND) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_TEST, \ 0,"CONDITION=\"" #COND "\" EXCEPTION=\"" "Test_Exception" "\"",COND,\ TEST_FAILED_CHECK_ACTION(::diagnostics::unittest::Test_Exception,COND)) #define TEST_CHECK1(NAME,COND,STR_WHAT) \ DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_TEST, \ 0,\ ::std::string("CONDITION=\"" #COND "\" EXCEPTION=\"" #NAME "\" WHAT=\"") + (STR_WHAT) + "\"",\ COND,TEST_FAILED_CHECK_ACTION1(NAME,COND,STR_WHAT)) #define TEST_CLASS_THROWING_INVARINACE_ENTER DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_ENTER #define TEST_CLASS_THROWING_INVARINACE_EXIT \ DIAGNOSTICS_BASE_CLASS_THROWING_INVARIANCE_EXIT(::diagnostics::LEVEL_TEST,\ 0, \ TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ TEST_BASE_EXCEPTION_TYPE,\ TEST_BASE_EXCEPTION_STR_WHAT) #define TEST_CLASS_INVARINACE_GUARD DIAGNOSTICS_BASE_CLASS_INVARIANCE_GUARD #define TEST_CLASS_INVARINACE_ENTER DIAGNOSTICS_BASE_CLASS_INVARIANCE_ENTER #define TEST_CLASS_INVARINACE_EXIT DIAGNOSTICS_BASE_CLASS_INVARIANCE_EXIT #define TEST_EXCEPTIONLESS_BLOCK_ENTER DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_ENTER #define TEST_EXCEPTIONLESS_BLOCK_EXIT \ DIAGNOSTICS_BASE_EXCEPTIONLESS_BLOCK_EXIT(::diagnostics::LEVEL_TEST,\ 0, \ false,\ TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ TEST_BASE_EXCEPTION_TYPE,\ TEST_BASE_EXCEPTION_STR_WHAT) #define TEST_THROWING_BLOCK_ENTER DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER #define TEST_INTERNAL_THROWING_BLOCK_EXIT_TRUE true #define TEST_INTERNAL_THROWING_BLOCK_EXIT_EMPTY(e) "" #define TEST_THROWING_BLOCK_EXIT(EXCEP) \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(::diagnostics::LEVEL_TEST,\ 0, \ EXCEP,\ TEST_INTERNAL_THROWING_BLOCK_EXIT_TRUE, \ TEST_INTERNAL_THROWING_BLOCK_EXIT_EMPTY, \ false,\ TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ TEST_BASE_EXCEPTION_TYPE,\ TEST_BASE_EXCEPTION_STR_WHAT) #define TEST_INTERNAL_THROWING_BLOCK_EXIT_CHECK_WHAT(WHAT) (::strcmp(e.what(),WHAT)==0) #define TEST_THROWING_BLOCK_EXIT1(EXCEP,WHAT) \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(::diagnostics::LEVEL_TEST,\ 0, \ EXCEP,\ TEST_INTERNAL_THROWING_BLOCK_EXIT_CHECK_WHAT(WHAT), \ TEST_BASE_EXCEPTION_STR_WHAT, \ false,\ TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ TEST_BASE_EXCEPTION_TYPE,\ TEST_BASE_EXCEPTION_STR_WHAT) #define TEST_THROWING_BLOCK_EXIT2(EXCEP,PRED) \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(::diagnostics::LEVEL_TEST,\ 0, \ EXCEP,\ PRED, \ TEST_BASE_EXCEPTION_STR_WHAT, \ false,\ TEST_HANDLE_TEST_EXCEPTION_EXPLICITLY,\ TEST_BASE_EXCEPTION_TYPE,\ TEST_BASE_EXCEPTION_STR_WHAT) #define TEST_ASSERT_RELATION(OP1,REL,OP2) \ DIAGNOSTICS_RELATION(TEST_ASSERT1,::diagnostics::unittest::Test_Exception,OP1,REL,OP2) #define TEST_CHECK_RELATION(OP1,REL,OP2) \ DIAGNOSTICS_RELATION(TEST_ASSERT1,::diagnostics::unittest::Test_Exception,OP1,REL,OP2) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/test_front_end.t.cpp0000644000076500000240000000440211172433106020517 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/test_front_end.t.cpp * * @brief [LEVEL: beta] testing test_front_end.hpp * * $Id: test_front_end.t.cpp,v 1.2 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @todo add testcases */ #include // component #include // backdoor #include // used component #include #include // test support #include #include #define TEST_COMPONENT_NAME test_front_end #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; void bla(Test_Data & data) { } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&bla,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/throwing_block_annotation.hpp0000644000076500000240000001377611172433106022530 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/throwing_block_annotation.hpp * * $Id: throwing_block_annotation.hpp,v 1.11 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER * and @ref DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT * * @test diagnostics/macros/throwing_block_annotation.t.cpp */ #ifndef DIAGNOSTICS__MACROS__THROWING_BLOCK_ANNOTATION_INCLUDE_GUARD #define DIAGNOSTICS__MACROS__THROWING_BLOCK_ANNOTATION_INCLUDE_GUARD // ::diagnostics::logging_facility::log #include // DIAGNOSTICS_BASE_CONCAT #include /** * @brief opens a @ref DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT */ #define DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER \ do { bool internal__caught_exception=false; \ try { #define DIAGNOSTICS_INTERNAL_WHAT_STRING_BUILDER(EXCEP,PRED,TAIL) \ (::std::string("EXPECTED.NAME=\"" #EXCEP "\" EXPECTED.PREDICATE=\"" #PRED "\" ") + TAIL) #define DIAGNOSTICS_INTERNAL_WHAT_STRING_BUILDER1(EXCEP,PRED) \ ("EXPECTED.NAME=\"" #EXCEP "\" EXPECTED.PREDICATE=\"" #PRED "\"") #define DIAGNOSTICS_INTERNAL_THROWING_HANDLE_TE0(LEVEL,NR_WHAT,RETHROW,EXCEP,PRED) #define DIAGNOSTICS_INTERNAL_THROWING_HANDLE_TE1(LEVEL,NR_WHAT,RETHROW,EXCEP,PRED) \ catch(::diagnostics::unittest::Test_Exception & e) { \ DIAGNOSTICS_BASE_LOG(LEVEL, \ ::diagnostics::TYPE_WRONG_EXCEPTION, \ NR_WHAT, \ DIAGNOSTICS_INTERNAL_WHAT_STRING_BUILDER(EXCEP,PRED,\ (::std::string("NAME=\"") + e.name() + "\" WHAT=\"" + e.what() + "\""))); \ if(RETHROW) throw; else internal__caught_exception=true; \ } /** * @brief Closes a block which is expected to throw an exception of * type @a EXCEP. * * If an exception of type @a EXCEP occurs which satisfies @a PRED, * no log message is generated. * * If an exception e of type @a EXCEP occurs which does not satisfy @a * PRED, then a (@a LEVEL, @ref diagnostics::TYPE_WRONG_EXCEPTION, @a NR_WHAT, * EXPECTED.NAME="#EXCEP" EXPECTED.PREDICATE="#PRED" @a PRED_STR_WHAT(e)) is logged. * * If an exception e of a type not being convertible to @a EXCEP but * of type @a BASE occurs, a (@a LEVEL, @ref diagnostics::TYPE_WRONG_EXCEPTION, @a NR_WHAT, * EXPECTED.NAME="#EXCEP" EXPECTED.PREDICATE="#PRED" @a STR_WHAT(e)) message is * logged. * * If an exception e of a type not being convertible to @a EXCEP and * not convertible to @a BASE occurs, a (@a LEVEL, @ref * diagnostics::TYPE_WRONG_EXCEPTION, @a NR_WHAT, * EXPECTED.NAME="#EXCEP" EXPECTED.PREDICATE="#PRED") message is logged. * * If an exception e of type @ref * diagnostics::unittest::Test_Exception is raised and @a * HANDLE_TE_EXLPLICITLY == 1) then a (@ a LEVEL, @ref * diagnostics::TYPE_WRONG_EXCEPTION, @a NR_WHAT, * EXPECTED.NAME="#EXCEP" EXPECTED.PREDICATE="#PRED" NAME="e.name()" WHAT="e.what()" * message is logged. * * In all three of the above cases, if @a RETHROW is true, the * exception is rethrown, elsewise it is dropped. * * If no exception is raised, then (@a LEVEL, @ref * diagnostics::TYPE_MISSING_EXCEPTION, @a NR_WHAT * EXPECTED.NAME="#EXCEP" EXPECTED.PREDICATE="#PRED" * message is logged. */ #define DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL,NR_WHAT,EXCEP,PRED,PRED_STR_WHAT,RETHROW,HANDLE_TE_EXLPLICITLY,BASE,STR_WHAT) \ } \ catch(EXCEP & e) { \ if(!(PRED)) { \ DIAGNOSTICS_BASE_LOG((LEVEL), \ ::diagnostics::TYPE_WRONG_EXCEPTION, \ (NR_WHAT), \ DIAGNOSTICS_INTERNAL_WHAT_STRING_BUILDER(EXCEP,PRED,PRED_STR_WHAT(e))); \ if(RETHROW) throw; else internal__caught_exception=true; \ } \ else { \ if(RETHROW) throw; else internal__caught_exception=true; \ } \ } \ DIAGNOSTICS_BASE_CONCAT(DIAGNOSTICS_INTERNAL_THROWING_HANDLE_TE,HANDLE_TE_EXLPLICITLY)((LEVEL),(NR_WHAT),(RETHROW),EXCEP,PRED) \ catch(BASE & e) { \ DIAGNOSTICS_BASE_LOG((LEVEL), \ ::diagnostics::TYPE_WRONG_EXCEPTION, \ (NR_WHAT), \ DIAGNOSTICS_INTERNAL_WHAT_STRING_BUILDER(EXCEP,PRED,STR_WHAT(e))); \ if(RETHROW) throw; else internal__caught_exception=true; \ } \ catch(...) { \ DIAGNOSTICS_BASE_LOG((LEVEL),::diagnostics::TYPE_WRONG_EXCEPTION,(NR_WHAT), \ DIAGNOSTICS_INTERNAL_WHAT_STRING_BUILDER1(EXCEP,PRED)); \ if(RETHROW) throw; else internal__caught_exception=true; \ } \ if(!internal__caught_exception) { \ DIAGNOSTICS_BASE_LOG((LEVEL),::diagnostics::TYPE_MISSING_EXCEPTION,(NR_WHAT), \ DIAGNOSTICS_INTERNAL_WHAT_STRING_BUILDER1(EXCEP,PRED)); \ } } while(false) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/macros/throwing_block_annotation.t.cpp0000644000076500000240000002240411513037566022762 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/macros/throwing_block_annotation.t.cpp * * @brief [LEVEL: beta] testing @ref * DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER and @ref * DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT * * $Id: throwing_block_annotation.t.cpp,v 1.13 2005/06/23 09:54:22 esdentem Exp $ * * @author Christian Schallhart */ #include // component #include // backdoor #include // used component #include #include // test support #include #include #define TEST_COMPONENT_NAME throwing_block_annotation #define TEST_COMPONENT_NAMESPACE diagnostics DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; using ::diagnostics::unittest::internal::Current_Test_Logger; #define STR_WHAT(e) (::std::string("NAME=\"") + e.name() + "\" WHAT=\"" + e.what() +"\"") #define STR_WHAT_INT(e) (::std::string("NAME=\"int\" WHAT=\"") + ::diagnostics::internal::to_string(e)+"\"") #define PRED true #define EMTPY(e) "" #define EMPTY(e) "" #define PRED_WHAT(WHAT) (0 == ::std::strcmp(e.what(),WHAT)) #define TEST_CASE(EXPLICIT_TE) \ { \ Dummy_Logger * logger=new Dummy_Logger; \ Dummy_Logger::Records_t & records(logger->records()); \ typedef Dummy_Logger::Records_t::iterator Iter_t; \ \ Logging_Config::register_logger(logger); \ Iter_t current; \ \ if(rethrow){ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw 5; \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_PROD,10,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT(int); \ \ current=records.begin(); \ TEST_CHECK(current->type()==TYPE_LOG_OPEN); \ ++current; \ \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_TEST,20,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw 5.5f; \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_DEBUG,30,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT(float); \ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw Test_Exception("what"); \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_AUDIT,40,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("what").c_str()); \ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw Test_Exception("huhu"); \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_AUDIT,50,int,PRED,EMPTY,rethrow,EXPLICIT_TE,int,STR_WHAT_INT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("huhu").c_str()); \ \ TEST_THROWING_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw Test_Exception("what"); \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_AUDIT,60, \ Test_Exception, \ PRED_WHAT("other"), \ STR_WHAT,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_THROWING_BLOCK_EXIT1(Test_Exception,::std::string("what").c_str()); \ } \ else { \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw 5; \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_PROD,10,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ \ current=records.begin(); \ TEST_CHECK(current->type()==TYPE_LOG_OPEN); \ ++current; \ \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_TEST,20,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw "bla"; \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_DEBUG,30,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw Test_Exception("what"); \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_AUDIT,40,int,PRED,EMPTY,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw Test_Exception("huhu"); \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_AUDIT,50,int,PRED,EMPTY,rethrow,EXPLICIT_TE,int,STR_WHAT_INT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ \ TEST_EXCEPTIONLESS_BLOCK_ENTER; \ TEST_NO_IMPLICIT_LOGGING_ENTER; \ DIAGNOSTICS_BASE_THROWING_BLOCK_ENTER; \ throw Test_Exception("what"); \ DIAGNOSTICS_BASE_THROWING_BLOCK_EXIT(LEVEL_AUDIT,60, \ Test_Exception, \ PRED_WHAT("other"), \ STR_WHAT,rethrow,EXPLICIT_TE, ::diagnostics::Exception,STR_WHAT); \ TEST_NO_IMPLICIT_LOGGING_EXIT; \ TEST_EXCEPTIONLESS_BLOCK_EXIT; \ } \ \ Logging_Config::unregister_logger(logger); \ \ current=records.begin(); \ TEST_CHECK(current->type()==TYPE_LOG_OPEN); \ ++current; \ \ TEST_ASSERT_RECORD1(LEVEL_TEST,TYPE_MISSING_EXCEPTION,20,"EXPECTED.NAME=\"int\" EXPECTED.PREDICATE=\"true\""); \ ++current; \ TEST_ASSERT_RECORD1(LEVEL_DEBUG,TYPE_WRONG_EXCEPTION,30,"EXPECTED.NAME=\"int\" EXPECTED.PREDICATE=\"true\""); \ ++current; \ TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_WRONG_EXCEPTION,40,"EXPECTED.NAME=\"int\" EXPECTED.PREDICATE=\"true\" " \ "NAME=\"Test_Exception\" WHAT=\"what\""); \ ++current; \ if(EXPLICIT_TE==1) \ TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_WRONG_EXCEPTION,50,"EXPECTED.NAME=\"int\" EXPECTED.PREDICATE=\"true\" " \ "NAME=\"Test_Exception\" WHAT=\"huhu\""); \ else \ TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_WRONG_EXCEPTION,50,"EXPECTED.NAME=\"int\" EXPECTED.PREDICATE=\"true\""); \ ++current; \ TEST_ASSERT_RECORD1(LEVEL_AUDIT,TYPE_WRONG_EXCEPTION,60,"EXPECTED.NAME=\"Test_Exception\" " \ "EXPECTED.PREDICATE=\"(0 == ::std::strcmp(e.what(),\"other\"))\" NAME=\"Test_Exception\" WHAT=\"what\""); \ ++current; \ \ TEST_CHECK(current->type()==TYPE_LOG_CLOSE); \ TEST_CHECK(current+1==records.end()); \ delete logger; \ \ } /// @todo clean up. void no_explicit_te(bool const rethrow) TEST_CASE(0) void explicit_te(bool const rethrow) // This test case generates code has redundant catch(Test_Exception &) // clauses. Most compilers warn in this case. TEST_CASE(1) void no_explicit_te_rethrow(Test_Data & data) { no_explicit_te(true); } void no_explicit_te_nothrow(Test_Data & data) { no_explicit_te(false); } void explicit_te_rethrow(Test_Data & data) { explicit_te(true); } void explicit_te_nothrow(Test_Data & data) { explicit_te(false); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&no_explicit_te_rethrow,LEVEL_PROD); TEST_NORMAL_CASE(&no_explicit_te_nothrow,LEVEL_PROD); TEST_NORMAL_CASE(&explicit_te_rethrow,LEVEL_PROD); TEST_NORMAL_CASE(&explicit_te_nothrow,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/Makefile.am0000644000076500000240000000262611335527773015331 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = extensions frame logger macros unittest util basic_exceptions check_PROGRAMS = lib_annotations lib_annotations_SOURCES = lib_annotations.t.cpp # add additional objects required to build lib_annotations here, like # lib_annotations_LDADD = ../base/libbase.la libbla.la lib_annotations_LDADD = libdiagnostics.la unittest/test_system/libtest_system_ts.la util/libutil_ts.la include_diagnosticsdir = $(includedir)/diagnostics include_diagnostics_HEADERS = annotations.hpp configuration.hpp features.hpp instrumentation.hpp lib_annotations.hpp memory.hpp unittest.hpp lib_LTLIBRARIES = libdiagnostics.la libdiagnostics_la_SOURCES = libdiagnostics_la_LIBADD = extensions/instrumentation/libinstrumentation.la extensions/memory/libmemory.la frame/libframe.la logger/liblogger.la unittest/libunittest.la unittest/test_system/libtest_system.la util/libutil.la basic_exceptions/libbasic_exceptions.la if STACKTRACE libdiagnostics_la_LIBADD += extensions/stacktrace/libstacktrace.la endif libdiagnostics_la_LDFLAGS = -version-info 1:2:1 $(LIBLTDL) TESTS = lib_annotations diagnostics-0.3.3/diagnostics/Makefile.in0000644000076500000240000010030311567506171015325 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am check_PROGRAMS = lib_annotations$(EXEEXT) @STACKTRACE_TRUE@am__append_1 = extensions/stacktrace/libstacktrace.la TESTS = lib_annotations$(EXEEXT) subdir = diagnostics ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(libdir)" \ "$(DESTDIR)$(include_diagnosticsdir)" LTLIBRARIES = $(lib_LTLIBRARIES) libdiagnostics_la_DEPENDENCIES = \ extensions/instrumentation/libinstrumentation.la \ extensions/memory/libmemory.la frame/libframe.la \ logger/liblogger.la unittest/libunittest.la \ unittest/test_system/libtest_system.la util/libutil.la \ basic_exceptions/libbasic_exceptions.la $(am__append_1) am_libdiagnostics_la_OBJECTS = libdiagnostics_la_OBJECTS = $(am_libdiagnostics_la_OBJECTS) libdiagnostics_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libdiagnostics_la_LDFLAGS) $(LDFLAGS) -o $@ am_lib_annotations_OBJECTS = lib_annotations.t.$(OBJEXT) lib_annotations_OBJECTS = $(am_lib_annotations_OBJECTS) lib_annotations_DEPENDENCIES = libdiagnostics.la \ unittest/test_system/libtest_system_ts.la util/libutil_ts.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libdiagnostics_la_SOURCES) $(lib_annotations_SOURCES) DIST_SOURCES = $(libdiagnostics_la_SOURCES) $(lib_annotations_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive HEADERS = $(include_diagnostics_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = extensions frame logger macros unittest util basic_exceptions lib_annotations_SOURCES = lib_annotations.t.cpp # add additional objects required to build lib_annotations here, like # lib_annotations_LDADD = ../base/libbase.la libbla.la lib_annotations_LDADD = libdiagnostics.la unittest/test_system/libtest_system_ts.la util/libutil_ts.la include_diagnosticsdir = $(includedir)/diagnostics include_diagnostics_HEADERS = annotations.hpp configuration.hpp features.hpp instrumentation.hpp lib_annotations.hpp memory.hpp unittest.hpp lib_LTLIBRARIES = libdiagnostics.la libdiagnostics_la_SOURCES = libdiagnostics_la_LIBADD = \ extensions/instrumentation/libinstrumentation.la \ extensions/memory/libmemory.la frame/libframe.la \ logger/liblogger.la unittest/libunittest.la \ unittest/test_system/libtest_system.la util/libutil.la \ basic_exceptions/libbasic_exceptions.la $(am__append_1) libdiagnostics_la_LDFLAGS = -version-info 1:2:1 $(LIBLTDL) all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libdiagnostics.la: $(libdiagnostics_la_OBJECTS) $(libdiagnostics_la_DEPENDENCIES) $(libdiagnostics_la_LINK) -rpath $(libdir) $(libdiagnostics_la_OBJECTS) $(libdiagnostics_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list lib_annotations$(EXEEXT): $(lib_annotations_OBJECTS) $(lib_annotations_DEPENDENCIES) @rm -f lib_annotations$(EXEEXT) $(CXXLINK) $(lib_annotations_OBJECTS) $(lib_annotations_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lib_annotations.t.Po@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnosticsHEADERS: $(include_diagnostics_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnosticsdir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnosticsdir)" @list='$(include_diagnostics_HEADERS)'; test -n "$(include_diagnosticsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnosticsdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnosticsdir)" || exit $$?; \ done uninstall-include_diagnosticsHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_HEADERS)'; test -n "$(include_diagnosticsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnosticsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnosticsdir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(include_diagnosticsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ clean-libtool mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnosticsHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-libLTLIBRARIES install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnosticsHEADERS \ uninstall-libLTLIBRARIES .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ clean-libtool ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-include_diagnosticsHEADERS \ install-info install-info-am install-libLTLIBRARIES \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnosticsHEADERS uninstall-libLTLIBRARIES vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/memory.hpp0000644000076500000240000000326611172433107015301 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/memory.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] Use-Case: The include file is used in a * main-component (i.e., a component which contains the main() * procedure) to switch on memory analysis. * * @attention: Causes Memory Allocations/Deallocations to be slow! */ #ifndef DIAGNOSTICS__MEMORY__INCLUDE_GUARD #define DIAGNOSTICS__MEMORY__INCLUDE_GUARD #include #include #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/0000755000076500000240000000000011567507571015227 500000000000000diagnostics-0.3.3/diagnostics/unittest/build_test_suite.hpp0000644000076500000240000000404111172433106021206 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/build_test_suite.hpp * * @brief [LEVEL: beta] Declaration of the @ref diagnostics::unittest::build_test_suite method. * * $Id: build_test_suite.hpp,v 1.4 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__BUILD_TEST_SUITE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__BUILD_TEST_SUITE_HPP__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used by reference in the interface // diagnostics/unittest/test_suite.hpp class Test_Suite; /** * @brief This method is used by test backends to obtain the tests of * the current test-driver (the cpp file, which contains the unittest). */ Test_Suite* build_test_suite(); UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/func_test_case.hpp0000644000076500000240000001275511172433106020637 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/func_test_case.hpp * * @brief [LEVEL: beta] diagnostics::unittest::Func_Test_Case class and @ref * diagnostics::unittest::create_func_test_case builder. * * $Id: func_test_case.hpp,v 1.13 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/func_test_case.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__FUNC_TEST_CASE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__FUNC_TEST_CASE_HPP__INCLUDE_GUARD // brief used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Func_Test_Case diagnostics/unittest/func_test_case.hpp * * @brief The Func_Test_Case class is used to specify Test_Cases with * help of a functional objects. * * This class uses @ref Std_Test_Case as base and allows to add an * object which implements void operator()(Test_Data & test_data) (or * just a free function with this signature) to complete the @ref * Test_Case. A convenient way to create instances of this class is * provided by @ref create_func_test_case. * * @param FUNC must be copyable and must implement void * operator()(Test_Data & test_data) const * * @nosubgrouping */ template class Func_Test_Case : public Std_Test_Case { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Func_Test_Case Self; typedef Std_Test_Case Super; public: typedef FUNC Function_t; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: /** * @brief no default cstr */ Func_Test_Case(); /** * @brief no copy cstr */ Func_Test_Case(Self const & other); /** * @brief no assignement */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief the only way to construct a Func_Test_Case. * * @a func is the functional object used by @ref run. All other * parameters as well as the error conditions are the same as in * @ref Std_Test_Case::Std_Test_Case. */ Func_Test_Case(Function_t const & func, ::std::string const & name, int const timeout, bool const is_rerunable, bool const testable_at_prod, bool const testable_at_debug, bool const testable_at_audit); /** * @throw never */ virtual ~Func_Test_Case(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Hook Implementation * @{ */ public: /** * @brief The run method is only delegating to @ref m_func. */ virtual void run(Test_Data & test_data) const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: Function_t const m_func; // @} }; template Func_Test_Case::Func_Test_Case(Function_t const & func, ::std::string const & name, int const timeout, bool const is_rerunable, bool const testable_at_prod, bool const testable_at_debug, bool const testable_at_audit) : Super(name, timeout, is_rerunable, testable_at_prod, testable_at_debug, testable_at_audit), m_func(func) { } template void Func_Test_Case::run(Test_Data & test_data) const { m_func(test_data); } template Func_Test_Case::~Func_Test_Case() { } /** * @brief wrapper for the cstr to get rid of explicit template * parameter specification. */ template Test_Case * create_func_test_case(FUNC const & func, ::std::string const & name, int const timeout, bool const is_rerunable, bool const testable_at_prod, bool const testable_at_debug, bool const testable_at_audit) { return new Func_Test_Case(func, name, timeout, is_rerunable, testable_at_prod, testable_at_debug, testable_at_audit); } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/func_test_case.t.cpp0000644000076500000240000000605411172433106021067 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/func_test_case.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Func_Test_Case * * $Id: func_test_case.t.cpp,v 1.9 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include #include #define TEST_COMPONENT_NAME Func_Test_Case #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; void test_function(Test_Data & test_data) { // just to check for the call throw Test_Exception("xxx"); } class Test_Function_Object { public: void operator()(Test_Data & test_data) const { // just to check for the call throw Test_Exception("xxx"); } }; /** * @brief [PRO] fct/normal: testing Composition from function. */ void composition_from_function(Test_Data & test_data) { Test_Case *t(create_func_test_case(&test_function, "test_function", 3, true, true, true, true)); TEST_THROWING_BLOCK_ENTER; t->run(test_data); TEST_THROWING_BLOCK_EXIT(Test_Exception); delete t; } /** * @brief [PRO] fct/normal: testing Composition from function. */ void composition_from_object(Test_Data & test_data) { Test_Case *t(create_func_test_case(Test_Function_Object(), "test_function", 3, true, true, true, true)); TEST_THROWING_BLOCK_ENTER; t->run(test_data); TEST_THROWING_BLOCK_EXIT(Test_Exception); delete t; } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&composition_from_function,LEVEL_PROD); TEST_NORMAL_CASE(&composition_from_object,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/Makefile.am0000644000076500000240000000543411335527772017207 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = test_system noinst_LTLIBRARIES = libunittest.la libunittest_la_SOURCES = name_separators.cpp std_test_case.cpp stream_test_system_main.cpp test_case.cpp test_data.cpp test_exception.cpp test_suite.cpp test_system_exception.cpp pkginclude_HEADERS = build_test_suite.hpp func_test_case.hpp name_separators.hpp namespace.hpp std_test_case.hpp stream_test_system_main.hpp test_case.hpp test_case_cstr.hpp test_data.hpp test_exception.hpp test_suite.hpp test_system_exception.hpp testing_namespaces.hpp check_PROGRAMS = func_test_case name_separators std_test_case test_case_cstr test_suite func_test_case_SOURCES = func_test_case.t.cpp # add additional objects required to build func_test_case here, like # func_test_case_LDADD = ../base/libbase.la libbla.la func_test_case_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la name_separators_SOURCES = name_separators.t.cpp # add additional objects required to build name_separators here, like # name_separators_LDADD = ../base/libbase.la libbla.la name_separators_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la std_test_case_SOURCES = std_test_case.t.cpp # add additional objects required to build std_test_case here, like # std_test_case_LDADD = ../base/libbase.la libbla.la std_test_case_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la test_case_cstr_SOURCES = test_case_cstr.t.cpp # add additional objects required to build test_case_cstr here, like # test_case_cstr_LDADD = ../base/libbase.la libbla.la test_case_cstr_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la test_suite_SOURCES = test_suite.t.cpp # add additional objects required to build test_suite here, like # test_suite_LDADD = ../base/libbase.la libbla.la test_suite_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_unittestdir = $(includedir)/diagnostics/unittest include_diagnostics_unittest_HEADERS = build_test_suite.hpp func_test_case.hpp name_separators.hpp namespace.hpp std_test_case.hpp stream_test_system_main.hpp test_case.hpp test_case_cstr.hpp test_data.hpp test_exception.hpp test_suite.hpp test_system_exception.hpp testing_namespaces.hpp TESTS = func_test_case name_separators std_test_case test_case_cstr test_suite diagnostics-0.3.3/diagnostics/unittest/Makefile.in0000644000076500000240000010753511567506172017223 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_unittest_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am check_PROGRAMS = func_test_case$(EXEEXT) name_separators$(EXEEXT) \ std_test_case$(EXEEXT) test_case_cstr$(EXEEXT) \ test_suite$(EXEEXT) TESTS = func_test_case$(EXEEXT) name_separators$(EXEEXT) \ std_test_case$(EXEEXT) test_case_cstr$(EXEEXT) \ test_suite$(EXEEXT) subdir = diagnostics/unittest ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libunittest_la_LIBADD = am_libunittest_la_OBJECTS = name_separators.lo std_test_case.lo \ stream_test_system_main.lo test_case.lo test_data.lo \ test_exception.lo test_suite.lo test_system_exception.lo libunittest_la_OBJECTS = $(am_libunittest_la_OBJECTS) am_func_test_case_OBJECTS = func_test_case.t.$(OBJEXT) func_test_case_OBJECTS = $(am_func_test_case_OBJECTS) func_test_case_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ test_system/libtest_system_ts.la ../util/libutil_ts.la am_name_separators_OBJECTS = name_separators.t.$(OBJEXT) name_separators_OBJECTS = $(am_name_separators_OBJECTS) name_separators_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ test_system/libtest_system_ts.la ../util/libutil_ts.la am_std_test_case_OBJECTS = std_test_case.t.$(OBJEXT) std_test_case_OBJECTS = $(am_std_test_case_OBJECTS) std_test_case_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ test_system/libtest_system_ts.la ../util/libutil_ts.la am_test_case_cstr_OBJECTS = test_case_cstr.t.$(OBJEXT) test_case_cstr_OBJECTS = $(am_test_case_cstr_OBJECTS) test_case_cstr_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ test_system/libtest_system_ts.la ../util/libutil_ts.la am_test_suite_OBJECTS = test_suite.t.$(OBJEXT) test_suite_OBJECTS = $(am_test_suite_OBJECTS) test_suite_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ test_system/libtest_system_ts.la ../util/libutil_ts.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libunittest_la_SOURCES) $(func_test_case_SOURCES) \ $(name_separators_SOURCES) $(std_test_case_SOURCES) \ $(test_case_cstr_SOURCES) $(test_suite_SOURCES) DIST_SOURCES = $(libunittest_la_SOURCES) $(func_test_case_SOURCES) \ $(name_separators_SOURCES) $(std_test_case_SOURCES) \ $(test_case_cstr_SOURCES) $(test_suite_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_unittestdir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_unittest_HEADERS) \ $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = test_system noinst_LTLIBRARIES = libunittest.la libunittest_la_SOURCES = name_separators.cpp std_test_case.cpp stream_test_system_main.cpp test_case.cpp test_data.cpp test_exception.cpp test_suite.cpp test_system_exception.cpp pkginclude_HEADERS = build_test_suite.hpp func_test_case.hpp name_separators.hpp namespace.hpp std_test_case.hpp stream_test_system_main.hpp test_case.hpp test_case_cstr.hpp test_data.hpp test_exception.hpp test_suite.hpp test_system_exception.hpp testing_namespaces.hpp func_test_case_SOURCES = func_test_case.t.cpp # add additional objects required to build func_test_case here, like # func_test_case_LDADD = ../base/libbase.la libbla.la func_test_case_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la name_separators_SOURCES = name_separators.t.cpp # add additional objects required to build name_separators here, like # name_separators_LDADD = ../base/libbase.la libbla.la name_separators_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la std_test_case_SOURCES = std_test_case.t.cpp # add additional objects required to build std_test_case here, like # std_test_case_LDADD = ../base/libbase.la libbla.la std_test_case_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la test_case_cstr_SOURCES = test_case_cstr.t.cpp # add additional objects required to build test_case_cstr here, like # test_case_cstr_LDADD = ../base/libbase.la libbla.la test_case_cstr_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la test_suite_SOURCES = test_suite.t.cpp # add additional objects required to build test_suite here, like # test_suite_LDADD = ../base/libbase.la libbla.la test_suite_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la test_system/libtest_system_ts.la ../util/libutil_ts.la include_diagnostics_unittestdir = $(includedir)/diagnostics/unittest include_diagnostics_unittest_HEADERS = build_test_suite.hpp func_test_case.hpp name_separators.hpp namespace.hpp std_test_case.hpp stream_test_system_main.hpp test_case.hpp test_case_cstr.hpp test_data.hpp test_exception.hpp test_suite.hpp test_system_exception.hpp testing_namespaces.hpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/unittest/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/unittest/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libunittest.la: $(libunittest_la_OBJECTS) $(libunittest_la_DEPENDENCIES) $(CXXLINK) $(libunittest_la_OBJECTS) $(libunittest_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list func_test_case$(EXEEXT): $(func_test_case_OBJECTS) $(func_test_case_DEPENDENCIES) @rm -f func_test_case$(EXEEXT) $(CXXLINK) $(func_test_case_OBJECTS) $(func_test_case_LDADD) $(LIBS) name_separators$(EXEEXT): $(name_separators_OBJECTS) $(name_separators_DEPENDENCIES) @rm -f name_separators$(EXEEXT) $(CXXLINK) $(name_separators_OBJECTS) $(name_separators_LDADD) $(LIBS) std_test_case$(EXEEXT): $(std_test_case_OBJECTS) $(std_test_case_DEPENDENCIES) @rm -f std_test_case$(EXEEXT) $(CXXLINK) $(std_test_case_OBJECTS) $(std_test_case_LDADD) $(LIBS) test_case_cstr$(EXEEXT): $(test_case_cstr_OBJECTS) $(test_case_cstr_DEPENDENCIES) @rm -f test_case_cstr$(EXEEXT) $(CXXLINK) $(test_case_cstr_OBJECTS) $(test_case_cstr_LDADD) $(LIBS) test_suite$(EXEEXT): $(test_suite_OBJECTS) $(test_suite_DEPENDENCIES) @rm -f test_suite$(EXEEXT) $(CXXLINK) $(test_suite_OBJECTS) $(test_suite_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/func_test_case.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/name_separators.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/name_separators.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/std_test_case.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/std_test_case.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test_system_main.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_case.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_case_cstr.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_data.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_suite.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_suite.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_system_exception.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_unittestHEADERS: $(include_diagnostics_unittest_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_unittestdir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_unittestdir)" @list='$(include_diagnostics_unittest_HEADERS)'; test -n "$(include_diagnostics_unittestdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_unittestdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_unittestdir)" || exit $$?; \ done uninstall-include_diagnostics_unittestHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_unittest_HEADERS)'; test -n "$(include_diagnostics_unittestdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_unittestdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_unittestdir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_unittestdir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnostics_unittestHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_unittestHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-include_diagnostics_unittestHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgincludeHEADERS install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_unittestHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/unittest/name_separators.cpp0000644000076500000240000001177611172433106021032 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/name_separators.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::name_adheres_convention, @ref * diagnostics::unittest::path_adheres_convention, and @ref * diagnostics::unittest::mask_adheres_convention * * $Id: name_separators.cpp,v 1.5 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; bool name_adheres_convention(::std::string const & name) { if(::std::string::npos!=name.find(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR[0])) return false; if(::std::string::npos!=name.find(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR)) return false; if(::std::string::npos!=name.find(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK[0])) return false; return true; } bool path_adheres_convention(::std::string const & path) { // must begin with a '/' (DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR) if(path.find(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR[0])!=0) return false; // is not allowed to conatain '//' (DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR) if(path.find(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR)!= ::std::string::npos) return false; // is not allowed to conatain '*' (DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK) if(path.find(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK[0])!= ::std::string::npos) return false; // is not allowed to end with '/' (DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR) if(path.rfind(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR[0])==path.size()-1) return false; // is not allowed to contain a CASE_SEPERATOR directly followed by another one. // at the moment, that's the same as the previous check -- but who knows.... the future. //if(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR != // DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR) // if(path.find(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR // DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR)!= ::std::string::npos) //return false; return true; } bool mask_adheres_convention(::std::string const & mask) { // must begin with a '/' (DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR) if(mask.find(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR[0])!=0) return false; // is not allowed to conatain '//' (DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR) if(mask.find(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR)!= ::std::string::npos) return false; ::std::string::size_type const size(mask.size()-1); // is not allowed to end with '/' (DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR) if(mask.rfind(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR[0])==size) return false; ::std::string::size_type pos(mask.find(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK[0])); for(;pos!= ::std::string::npos ; pos=mask.find(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK[0],pos+1)){ // it can't be the first string, the // DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR must come // first if(mask[pos-1]!=DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR[0]) return false; if(pos, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/name_separators.hpp * * @brief [LEVEL: beta] @ref * diagnostics::unittest::name_adheres_convention, @ref * diagnostics::unittest::path_adheres_convention, and @ref * diagnostics::unittest::mask_adheres_convention * * $Id: name_separators.hpp,v 1.7 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/name_separators.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__NAME_SEPARATORS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__NAME_SEPARATORS_HPP__INCLUDE_GUARD #include #include #include /** * @brief to match everything */ #define DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK "*" /** * @brief to sperate parts of a test case path * (test_suite1/test_suite2/test_case) */ #define DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR "/" /** * @brief to sperate the test case path from the the test data name * (test_suite1/test_suite2/test_case//data) */ #define DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR "//" DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @brief checks whether @a name can be used as a name for a @ref * Test_Suite or a @ref Test_Case. * * @returns true iff name does neither contain a @ref * DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR nor a @ref * DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR nor a @ref * DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK. * * @note a name can be empty. This is used for the unnamed @ref Test_Suite. * * @throw never */ bool name_adheres_convention(::std::string const & name); /** * @brief checks whether @a path can be used as a path to a @ref * Test_Suite or a @ref Test_Case. * * @returns true iff @a path * @arg starts with a @ref DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR, * @arg contains neither @ref DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR * @arg nor a @ref DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK, * @arg and contains no DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR directly following * each other. * @arg Moreover, @a path is not allowed to end with @ref DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR * * @throw never */ bool path_adheres_convention(::std::string const & path); /** * @brief checks whether @a mask can be used as a mask to match paths. * * @returns true iff @a mask * @arg starts with a @ref DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR, * @arg contains neither @ref DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR, * @arg and contains no DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR directly following * each other. * @arg Moreover, @a mask is not allowed to end with @ref DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR. * @arg Finally, @a mask a @ref DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK is only allowed as suffix, or * it must between two @ref DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR. * * @throw never */ bool mask_adheres_convention(::std::string const & mask); UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/name_separators.t.cpp0000644000076500000240000002005111172433106021256 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/name_separators.t.cpp * * @brief [LEVEL: beta] testing @ref * diagnostics::unittest::name_adheres_convention and @ref * diagnostics::unittest::path_adheres_convention * * $Id: name_separators.t.cpp,v 1.8 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include #include #define TEST_COMPONENT_NAMESPACE diagnostics::unittest #define TEST_COMPONENT_NAME name_seperators DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief [PRO] fct/normal: usage of @ref name_adheres_convention */ void test_name_adheres_convention(Test_Data & test_data) { ::std::string const cs(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR); ::std::string const ds(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR); ::std::string const a(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK); TEST_ASSERT(name_adheres_convention("")); TEST_ASSERT(name_adheres_convention("bla")); TEST_ASSERT(!name_adheres_convention(cs)); TEST_ASSERT(!name_adheres_convention(ds)); TEST_ASSERT(!name_adheres_convention("bla" + cs)); TEST_ASSERT(!name_adheres_convention("bla" + ds)); TEST_ASSERT(!name_adheres_convention("bla" + a)); TEST_ASSERT(!name_adheres_convention(cs + "bla")); TEST_ASSERT(!name_adheres_convention(ds + "bla")); TEST_ASSERT(!name_adheres_convention(a + "bla")); TEST_ASSERT(!name_adheres_convention("xyz" + cs + "bla")); TEST_ASSERT(!name_adheres_convention("xyz" + ds + "bla")); TEST_ASSERT(!name_adheres_convention("xyz" + a + "bla")); // if this test fails, the implementation of name_adheres_convention must be changed! TEST_ASSERT(cs+cs==ds); } /** * @brief [PRO] fct/normal: usage of @ref path_adheres_convention */ void test_path_adheres_convention(Test_Data & test_data) { ::std::string const cs(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR); ::std::string const ds(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR); ::std::string const a(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK); // correct TEST_ASSERT(path_adheres_convention(cs + "x")); TEST_ASSERT(path_adheres_convention(cs + "x" + cs + "x")); // ends with a DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR TEST_ASSERT(!path_adheres_convention(cs)); TEST_ASSERT(!path_adheres_convention(cs + "x" + cs)); // no leading DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR TEST_ASSERT(!path_adheres_convention("")); TEST_ASSERT(!path_adheres_convention("bla")); // two times DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR TEST_ASSERT(!path_adheres_convention(cs + cs)); // placement of DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR TEST_ASSERT(!path_adheres_convention(ds)); TEST_ASSERT(!path_adheres_convention("bla" + ds)); TEST_ASSERT(!path_adheres_convention(ds + "bla")); TEST_ASSERT(!path_adheres_convention("xyz" + ds + "bla")); TEST_ASSERT(!path_adheres_convention(cs + "bla" + ds)); TEST_ASSERT(!path_adheres_convention(cs + ds + "bla")); TEST_ASSERT(!path_adheres_convention(cs + "xyz" + ds + "bla")); // placement of DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK TEST_ASSERT(!path_adheres_convention(a)); TEST_ASSERT(!path_adheres_convention("bla" + a)); TEST_ASSERT(!path_adheres_convention(a + "bla")); TEST_ASSERT(!path_adheres_convention("xyz" + a + "bla")); TEST_ASSERT(!path_adheres_convention(cs + "bla" + a)); TEST_ASSERT(!path_adheres_convention(cs + a + "bla")); TEST_ASSERT(!path_adheres_convention(cs + "xyz" + a + "bla")); } /** * @brief [PRO] fct/normal: usage of @ref mask_adheres_convention */ void test_mask_adheres_convention(Test_Data & test_data) { ::std::string const cs(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR); ::std::string const ds(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR); ::std::string const a(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK); // correct TEST_ASSERT(mask_adheres_convention(cs + "x")); TEST_ASSERT(mask_adheres_convention(cs + "x" + cs + "x")); TEST_ASSERT(mask_adheres_convention(cs + a)); TEST_ASSERT(mask_adheres_convention(cs + a + cs + "x")); TEST_ASSERT(mask_adheres_convention(cs + a + cs + a)); TEST_ASSERT(mask_adheres_convention(cs + "x" + cs + a)); // ends with a DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR TEST_ASSERT(!mask_adheres_convention(cs)); TEST_ASSERT(!mask_adheres_convention(cs + "x" + cs)); TEST_ASSERT(!mask_adheres_convention(cs + a + cs)); TEST_ASSERT(!mask_adheres_convention(cs + a + cs + "x" + cs)); // no leading DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR TEST_ASSERT(!mask_adheres_convention("")); TEST_ASSERT(!mask_adheres_convention("bla")); // two times DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR TEST_ASSERT(!mask_adheres_convention(cs + cs)); // placement of DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR TEST_ASSERT(!mask_adheres_convention(ds)); TEST_ASSERT(!mask_adheres_convention("bla" + ds)); TEST_ASSERT(!mask_adheres_convention(ds + "bla")); TEST_ASSERT(!mask_adheres_convention("xyz" + ds + "bla")); TEST_ASSERT(!mask_adheres_convention(cs + "bla" + ds)); TEST_ASSERT(!mask_adheres_convention(cs + ds + "bla")); TEST_ASSERT(!mask_adheres_convention(cs + "xyz" + ds + "bla")); // placement of DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK TEST_ASSERT(!mask_adheres_convention(a)); TEST_ASSERT(!mask_adheres_convention("bla" + a)); TEST_ASSERT(!mask_adheres_convention(a + "bla")); TEST_ASSERT(!mask_adheres_convention("xyz" + a + "bla")); TEST_ASSERT(!mask_adheres_convention(cs + "bla" + a)); TEST_ASSERT(!mask_adheres_convention(cs + a + "bla")); TEST_ASSERT(!mask_adheres_convention(cs + "xyz" + a + "bla")); TEST_ASSERT(!mask_adheres_convention(cs + a + cs + a + "x")); } /** * @brief [PRO] impl */ void case_seperator_twice_is_data_seperator(Test_Data & test_data) { ::std::string const cs(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR); ::std::string const ds(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR); ::std::string const a(DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK); // if this test fails, the implementation of all three functions has to change TEST_ASSERT(cs+cs==ds); // if this test fails, the implementation of all three functions has to change TEST_ASSERT(cs.size()==1); // if this test fails, the implementation of all three functions has to change TEST_ASSERT(a.size()==1); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&test_name_adheres_convention,LEVEL_PROD); TEST_NORMAL_CASE(&test_path_adheres_convention,LEVEL_PROD); TEST_NORMAL_CASE(&test_mask_adheres_convention,LEVEL_PROD); TEST_IMPL_CASE(&case_seperator_twice_is_data_seperator); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/namespace.hpp0000644000076500000240000000357611172433106017607 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/namespace.hpp * * @brief [LEVEL: beta] unittest namespace * * $Id: namespace.hpp,v 1.5 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #ifndef DIAGNOSTICS__UNITTEST__NAMESPACE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__NAMESPACE_HPP__INCLUDE_GUARD #include #define UNITTEST_NAMESPACE unittest #define UNITTEST_NAMESPACE_BEGIN namespace UNITTEST_NAMESPACE { void dummy_for_semicolon_do_not_use() #define UNITTEST_NAMESPACE_END } void dummy_for_semicolon_do_not_use() DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/std_test_case.cpp0000644000076500000240000000556011172433106020465 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/std_test_case.cpp * * @brief [LEVEL: beta] Implementation of @ref diagnostics::unittest::Std_Test_Case * * $Id: std_test_case.cpp,v 1.8 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Std_Test_Case::~Std_Test_Case() { } Std_Test_Case::Std_Test_Case(::std::string const & name, int const timeout, bool const is_rerunable, bool const testable_at_prod, bool const testable_at_debug, bool const testable_at_audit) : m_name(name), m_timeout(timeout), m_is_rerunable(is_rerunable), m_testable_at((testable_at_prod ? (1 << LEVEL_PROD) : 0) |(testable_at_debug ? (1 << LEVEL_DEBUG) : 0) |(testable_at_audit ? (1 << LEVEL_AUDIT) : 0)) { if(m_timeout<0) throw Test_System_Exception("Negative timeout value"); if(name.size()==0) throw Test_System_Exception("Empty Name"); if(!name_adheres_convention(name)) throw Test_System_Exception("The Test_Suit name does not comply to the conventions"); } bool Std_Test_Case::is_testable_at(Level_t const level) const { if(level==LEVEL_TEST) throw Test_System_Exception("LEVEL_TEST is not a build-level"); return 0!=(m_testable_at&(1<, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/std_test_case.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Std_Test_Case class * * $Id: std_test_case.hpp,v 1.12 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/std_test_case.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__STD_TEST_CASE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__STD_TEST_CASE_HPP__INCLUDE_GUARD // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Std_Test_Case diagnostics/unittest/std_test_case.hpp * * @brief The Test_Case class is a stdandard implementation of the * @ref Test_Case interface. * * Only the @ref run method is left pure virtual. * * @nosubgrouping */ class Std_Test_Case : public Test_Case { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Std_Test_Case Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: /** * @brief no default cstr */ Std_Test_Case(); /** * @brief no copy cstr */ Std_Test_Case(Self const & other); /** * @brief no assignement */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ protected: /** * @brief the only way to construct a Test_Case. To be used by a derived class. * * @param name is the test case name. * @param timeout is the timeout of the Test_Case in seconds (HYBRID: 0 means no timeout at all). * @param is_rerunable is true iff the @ref run method can be called twice. * @param testable_at_prod is true iff the Test_Case is meant to succeed in a @ref LEVEL_PROD build. * @param testable_at_debug symmetric to @a testable_at_prod * @param testable_at_audit symmetric to @a testable_at_prod * * @throw Test_System_Exception if * @arg @a name does not match the naming convention, i.e., * it does contains a @ref DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR or a * @ref DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR or equals the empty string. * @arg @a timeout is negative. */ Std_Test_Case(::std::string const & name, int const timeout, bool const is_rerunable, bool const testable_at_prod, bool const testable_at_debug, bool const testable_at_audit); /** * @throw never */ virtual ~Std_Test_Case(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Hooks * @{ */ public: /** * @brief The hook method called by the testing environment to invoke the Test_Case * * This method is supposed to terminate within @ref timeout() seconds, and to produce * no error in the build levels which are described by @ref is_testable_at(). * This method is only allowed to be invoked twice within the same process iff * @ref is_rerunable() returns true. The latter is useful for testcases which * test static entities. * @throw anything */ virtual void run(Test_Data & test_data) const=0; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief returns true for @a level if the Test_Case is supposed * to succeed at build level @a level * * @pre @a level != @ref LEVEL_TEST * * @throw Test_System_Exception */ virtual bool is_testable_at(Level_t const level) const; /** * @brief the name of the Test_Case * * @throw never */ virtual ::std::string const & name() const; /** * @brief the timeout of the Test_Case in seconds * * @throw never */ virtual int timeout() const; /** * @brief returns true if the Test_Case can be run more than once * * @throw never */ virtual bool is_rerunable() const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::string const m_name; int const m_timeout; bool const m_is_rerunable; int m_testable_at; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/std_test_case.t.cpp0000644000076500000240000001516311172433106020727 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/std_test_case.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Std_Test_Case * * $Id: std_test_case.t.cpp,v 1.12 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include #include // used components #include #include #include // test support #include #define TEST_COMPONENT_NAME Std_Test_Case #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief [PRO] fct/normal: constructor testing -- timeout == 0 */ void timeout_eq_0(Test_Data & test_data) { Dummy_Test_Case t("name",0,false,false,false,false); TEST_ASSERT(t.name()=="name"); TEST_ASSERT(t.timeout()==0); TEST_ASSERT(t.is_rerunable()==false); TEST_ASSERT(t.is_testable_at(LEVEL_PROD)==false); TEST_ASSERT(t.is_testable_at(LEVEL_DEBUG)==false); TEST_ASSERT(t.is_testable_at(LEVEL_AUDIT)==false); } /** * @brief [PRO] fct/normal: constructor testing -- timeout > 0 */ void timeout_gt_0(Test_Data & test_data) { Dummy_Test_Case t("name1",2,true,true,false,false); TEST_ASSERT(t.name()=="name1"); TEST_ASSERT(t.timeout()==2); TEST_ASSERT(t.is_rerunable()==true); TEST_ASSERT(t.is_testable_at(LEVEL_PROD)==true); TEST_ASSERT(t.is_testable_at(LEVEL_DEBUG)==false); TEST_ASSERT(t.is_testable_at(LEVEL_AUDIT)==false); } /** * @brief [PRO] fct/normal: constructor testing -- all variations for is_testable_at */ void all_is_testable_at_combinations(Test_Data & test_data) { int i; for(i=0;i<8;++i) { Dummy_Test_Case t("name1",2,true,i&(1<(i&(1<(i&(1<(i&(1<, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/stream_test_system_main.cpp * * @brief [LEVEL: beta] implementation of @ref diagnostics::unittest::Stream_Test_System_Main * * $Id: stream_test_system_main.cpp,v 1.5 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; void Stream_Test_System_Main::set_initial_loggers(::std::vector & loggers) { loggers.push_back(new Intending_File_Logger("test/diagnostic.log")); } int Stream_Test_System_Main::main(int const argc,char const * const * const argv,int const debug_level, Test_Suite* (*build_test_suite_ptr)()) { int result(0); try { Logging_Config::init(); char const * result_log_file_name("test/result.log"); char const * test_data_file_name("test/test.dat"); Stream_Test_System test_system(static_cast(debug_level), argc,argv, test_data_file_name, result_log_file_name, ::std::cin, ::std::cout); test_system.add((*build_test_suite_ptr)()); result=test_system.run(); } catch(::diagnostics::Exception & e) { DIAGNOSTICS_PANIC_LOG(::std::string("EXCEPTION=\"")+e.name()+"\" WHAT=\""+e.what()+"\""); DIAGNOSTICS_BASE_LOG(LEVEL_PROD,TYPE_UNEXPECTED_EXCEPTION,0, ::std::string("EXCEPTION=\"")+e.name()+"\" WHAT=\""+e.what()+"\""); result=-1; } catch(...) { DIAGNOSTICS_PANIC_LOG("Unknown Exception"); DIAGNOSTICS_BASE_LOG(LEVEL_PROD,TYPE_UNEXPECTED_EXCEPTION,0,""); result=-1; } return result; } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/stream_test_system_main.hpp0000644000076500000240000001016311335603603022605 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/stream_test_system_main.hpp * * @brief [LEVEL: beta] Macro to start a @ref * diagnostics::unittest::Stream_Test_System and to initialize the @ref * diagnostics::Logging_Config with a @ref * diagnostics::Intending_File_Logger. Provides insulation from all * involved interfaces. * * Clients have also the option to write their own insulation * wrapers. If they do so, they can use another configuration for * their testing while providing complilte-time independence. * * $Id: stream_test_system_main.hpp,v 1.4 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__STREAM_TEST_SYSTEM_MAIN_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__STREAM_TEST_SYSTEM_MAIN_HPP__INCLUDE_GUARD #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Stream_Test_System_Main * * @brief This class provides two methods, one for setting an initial * logger (a @ref File_Logger on "test/diagnostics.log") and a main * function which starts a @ref Stream_Test_System based on the * command-line arguments, build-level of the client executable and * given test-suite. The main reason for this wrapper is insulation -- * any change in the interfaces of the file-logger or of the @ref * Stream_Test_System should force us to recompile a client. */ struct Stream_Test_System_Main { static void set_initial_loggers(::std::vector & loggers); static int main(int const argc,char const * const * const argv,int const build_level, Test_Suite* (*build_test_suite_ptr)()); }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; /** * @brief starts a test environment using the methods of @ref * diagnostics::unittest::Stream_Test_System_Main * */ #define STREAM_TEST_SYSTEM_MAIN_ALL \ DIAGNOSTICS_NAMESPACE_BEGIN; \ void set_initial_loggers(::std::vector & loggers) \ { \ ::diagnostics::unittest::Stream_Test_System_Main::set_initial_loggers(loggers); \ } \ DIAGNOSTICS_NAMESPACE_END;\ \ int main(int argc,char ** argv) \ { \ int result; \ DIAGNOSTICS_BASE_BLOCK_GUARD(::diagnostics::LEVEL_PROD,::diagnostics::TYPE_PROCEDURE_ENTER,::diagnostics::TYPE_PROCEDURE_EXIT, \ 0,::std::string("procedure=\"") + DIAGNOSTICS_FUNC_NAME + "\" argv[0]=\"" + argv[0]+"\""); \ result= ::diagnostics::unittest::Stream_Test_System_Main::main(argc,argv,DEBUG__LEVEL__, \ & ::diagnostics::unittest::build_test_suite); \ return result; \ } void dummy_procedure_for_semicolon_do_not_call() #ifdef __MINGW32__ # define STREAM_TEST_SYSTEM_MAIN \ int _CRT_glob = 0; \ STREAM_TEST_SYSTEM_MAIN_ALL #else # define STREAM_TEST_SYSTEM_MAIN \ STREAM_TEST_SYSTEM_MAIN_ALL #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_case.cpp0000644000076500000240000000311011172433106017600 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_case.cpp * * @brief [LEVEL: beta] implementation @ref diagnostics::unittest::Test_Case interface * * $Id: test_case.cpp,v 1.6 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Case::~Test_Case() { } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_case.hpp0000644000076500000240000001000211172433106017603 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_case.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Case interface * * $Id: test_case.hpp,v 1.20 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__TEST_CASE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_CASE_HPP__INCLUDE_GUARD #include // used in the interface by value #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference // class Test_Data; /** * @class Test_Case diagnostics/unittest/test_case.hpp * * @brief The Test_Case interface is used to specify Test_Cases to the * test system. * * A Test_Case comes with the following data: * @arg its name, * @arg its timeout in seconds (0 means no timeout at all) * @arg whether it is rerunable * @arg and the build levels which it is testable at * Finally, the Test_Case comes with the @ref run method which is * called to run the Test_Case at hand. * * @nosubgrouping */ class Test_Case { public: /** * @throw never */ virtual ~Test_Case(); //////////////////////////////////////////////////////////////////////////////// /** * @name Hooks * @{ */ public: /** * @brief The hook method called by the testing environment to invoke the Test_Case * * This method is supposed to terminate within @ref timeout() seconds, and to produce * no error in the build levels which are described by @ref is_testable_at(). * This method is only allowed to be invoked twice within the same process iff * @ref is_rerunable() returns true. The latter is useful for testcases which * test static entities. * * @throw anything */ virtual void run(Test_Data & test_data) const=0; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief returns true for @a level if the Test_Case is supposed * to succeed at build level @a level * * @pre @a level != @ref LEVEL_TEST * * @throw Test_System_Exception */ virtual bool is_testable_at(Level_t const level) const=0; /** * @brief the name of the Test_Case * * @throw never */ virtual ::std::string const & name() const=0; /** * @brief the timeout of the Test_Case in seconds * * @throw never */ virtual int timeout() const=0; /** * @brief returns true if the Test_Case can be run more than once * * @throw never */ virtual bool is_rerunable() const=0; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_case_cstr.hpp0000644000076500000240000002564111172433106020655 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_case_cstr.hpp * * @brief [LEVEL: beta] Macros to construct Test_Suites. * * $Id: test_case_cstr.hpp,v 1.26 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * This files contains the macros to construct a standard @ref * diagnostics::unittest::Test_Suite of name NAME. Such a Test_Suite * consists of * * @arg NAME/fct/normal Test_Suite which contains those Test_Cases * which test for the indented usage. A @ref * diagnostics::unittest::Test_Case is added to this suite with the * macro @ref TEST_NORMAL_CASE. * * @arg NAME/fct/abnormal Test_Suite which contains those Test_Cases * which test for invalid usage. A @ref * diagnostics::unittest::Test_Case is added to this suite with the * macro @ref TEST_ABNORMAL_CASE. * * @arg NAME/nonfct Test_Suite which contains non-functional test such * as performance evaluations. A @ref diagnostics::unittest::Test_Case * is added to this suite with the macro @ref TEST_NONFCT_CASE. * * @arg NAME/impl Test_Suite contains tests which are aimed at testing * whether the platform is suitable for the component, e.g., if big * endians are necessary for correctness, it should be tested it there. * * Test_Cases in NAME/fct/ can be placed at @ref * diagnostics::LEVEL_PROD, @ref diagnostics::LEVEL_DEBUG or @ref * diagnostics::LEVEL_AUDIT. A test which is placed at LEVEL_PROD is * also placed at the two other levels. A test at LEVEL_DEBUG is also * placed LEVEL_AUDIT. A Test_Case in NAME/nonfct/ will be only placed * in LEVEL_PROD. * * Please read the documentation of @ref diagnostics::Level_t for a * description of the different build-levels. * * A test suite iconsists of a definition of test code in terms * procedures with the signature void ()(Test_Data &) or classes with a * corresponding void operator()(Test_Data &) const. These procedures * and and the instances of these classes are placed in the Test_Suite * with one of the macros TEST_NORMAL_CASE, TEST_ABNORMAL_CASE, * TEST_NONFCT_CASE. * * With @ref TEST_SUITE_BEGIN and @ref TEST_SUITE_END the @ref * ::diagnostics::unittest::build_test_suite procedure is built. * * The following is a brief example for a Test_Suite constructed with * these macros. * @include test_case_cstr_example.cpp * * @attention There can only one Test_Suite constructed this way per * executable. * * @test diagnostics/unittest/test_case_cstr.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_CASE_CSTR_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_CASE_CSTR_HPP__INCLUDE_GUARD #include #include #include #include /** * @brief Builds a standard @ref diagnostics::unittest::Test_Suite. * */ #define TEST_BUILD_TEST_SYSTEM(NAME) \ ::diagnostics::unittest::Test_Suite* fct_test_suite= new ::diagnostics::unittest::Test_Suite("fct"); \ ::diagnostics::unittest::Test_Suite* normal_test_suite= new ::diagnostics::unittest::Test_Suite("normal"); \ ::diagnostics::unittest::Test_Suite* abnormal_test_suite=new ::diagnostics::unittest::Test_Suite("abnormal"); \ ::diagnostics::unittest::Test_Suite* nonfct_test_suite= new ::diagnostics::unittest::Test_Suite("nonfct"); \ ::diagnostics::unittest::Test_Suite* impl_test_suite= new ::diagnostics::unittest::Test_Suite("impl"); \ ::diagnostics::unittest::Test_Suite* test_suite= new ::diagnostics::unittest::Test_Suite(NAME); \ fct_test_suite->add(normal_test_suite); \ fct_test_suite->add(abnormal_test_suite); \ test_suite->add(fct_test_suite); \ test_suite->add(nonfct_test_suite); \ test_suite->add(impl_test_suite) #define TEST_INTERNAL_TO_STRING(A) TEST_INTERNAL_TO_STRING_1(A) #define TEST_INTERNAL_TO_STRING_1(A) #A /** * @brief Building a Standard @ref diagnostics::unittest::Test_Suite. * * Used to build a @ref diagnostics::unittest::Test_Suite which contains up the @ref * diagnostics::unittest::Test_Suite @a /NAME/fct, @a /NAME/fct/normal, @a * /NAME/fct/abnormal, @a /NAME/nonfct and @a /NAME/impl_test_suite. * This @ref diagnostics::unittest::Test_Suite will be returned by TEST_SUITE_END -- where * NAME the name of the root Test_Suite. */ #define TEST_SUITE_BEGIN \ DIAGNOSTICS_NAMESPACE_BEGIN; \ UNITTEST_NAMESPACE_BEGIN; \ ::diagnostics::unittest::Test_Suite* build_test_suite() \ { \ TEST_BUILD_TEST_SYSTEM(TEST_INTERNAL_TO_STRING(TEST_COMPONENT_NAME)); \ using namespace :: TEST_COMPONENT_NAMESPACE; \ using namespace :: TEST_COMPONENT_NAMESPACE :: TEST_NAMESPACE; \ using namespace :: TEST_COMPONENT_NAMESPACE :: TEST_NAMESPACE :: TEST_COMPONENT_TEST_NAMESPACE #define TEST_SUITE_END \ return test_suite; \ } \ UNITTEST_NAMESPACE_END; \ DIAGNOSTICS_NAMESPACE_END DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @name Helper Functions for the adding macros * * The reason for introducing them is to enforce correct typing... * @{ */ template inline void fct_test_case_add(FUNC const & func, ::std::string const & name, int const timeout, bool const rerunable, Level_t const min_level, Test_Suite * suite) { suite->add(create_func_test_case(func,name,timeout,rerunable, min_level==LEVEL_PROD, min_level!=LEVEL_AUDIT, true)); } template inline void nonfct_test_case_add(FUNC const & func, ::std::string const & name, int const timeout, bool const rerunable, Test_Suite * suite) { suite->add(create_func_test_case(func,name,timeout,rerunable, true, false, false)); } // @} INTERNAL_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; /** * @brief Adds a @ref diagnostics::unittest::Test_Case which tests for normal usage * * The name of Test_Case is set to #FUNC (a leading '&' is removed), * and its timeout is set to 3 seconds. It is added to the @ref * diagnostics::unittest::Test_Suite NAME/fct/normal. * * @param FUNC a procedure or object with the signature void * operator()(@ref diagnostics::unittest::Test_Data & test_data) const * @param LEVEL the lowest build @ref diagnostics::Level_t which this * @ref diagnostics::unittest::Test_Case is valid for */ // braces around FUNC lead to a parse error of gcc-2.95 in the context of templated objects #define TEST_NORMAL_CASE(FUNC,LEVEL) \ ::diagnostics::unittest::internal::fct_test_case_add(FUNC,(#FUNC[0]=='&' ? #FUNC + 1 : #FUNC),3,true,::diagnostics::LEVEL,normal_test_suite) /** * @brief Adds a @ref diagnostics::unittest::Test_Case which tests for normal usage * * same parameters as in @ref TEST_NORMAL_CASE but also providing * @param RERUNABLE, which is true, if the test case can be run more than once. */ #define TEST_NORMAL_CASE1(FUNC,LEVEL,TIMEOUT,RERUNABLE) \ ::diagnostics::unittest::internal::fct_test_case_add(FUNC,(#FUNC[0]=='&' ? #FUNC + 1 : #FUNC),\ TIMEOUT,RERUNABLE,::diagnostics::LEVEL,normal_test_suite) /** * @brief Adds a @ref diagnostics::unittest::Test_Case which tests for normal usage * * same parameters as in @ref TEST_NORMAL_CASE2 but also providing * @param NAME, which allows to set the name explicitly. */ #define TEST_NORMAL_CASE2(FUNC,LEVEL,TIMEOUT,RERUNABLE,NAME) \ ::diagnostics::unittest::internal::fct_test_case_add(FUNC,NAME,\ TIMEOUT,RERUNABLE,::diagnostics::LEVEL,normal_test_suite) /** * @brief Adds a @ref diagnostics::unittest::Test_Case which tests for invalid usage * * The name of Test_Case is set to #FUNC (a leading '&' is removed), * and its timeout is set to 3 seconds. It is added to the @ref * diagnostics::unittest::Test_Suite NAME/fct/abnormal. * * @param FUNC a procedure or object with the signature void * operator()(@ref diagnostics::unittest::Test_Data & test_data) const * @param LEVEL the lowest build @ref diagnostics::Level_t which this @ref * diagnostics::unittest::Test_Case is valid for */ #define TEST_ABNORMAL_CASE(FUNC,LEVEL) \ ::diagnostics::unittest::internal::fct_test_case_add(FUNC,(#FUNC[0]=='&' ? #FUNC + 1 : #FUNC),3,true,::diagnostics::LEVEL,abnormal_test_suite) /** * @brief Adds a @ref diagnostics::unittest::Test_Case which test nonfunctional properties * * The name of Test_Case is set to #FUNC (a leading '&' is removed), * and it is only placed into @ref diagnostics::LEVEL_PROD. It is added to the * @ref diagnostics::unittest::Test_Suite NAME/nonfct. * * @param FUNC a procedure or object with the signature void * operator()(@ref diagnostics::unittest::Test_Data & test_data) const * @param TIMEOUT the timeout of the @ref * diagnostics::unittest::Test_Case in seconds */ #define TEST_NONFCT_CASE(FUNC,TIMEOUT) \ ::diagnostics::unittest::internal::nonfct_test_case_add((FUNC),(#FUNC[0]=='&' ? #FUNC + 1 : #FUNC),(TIMEOUT),true,nonfct_test_suite) /** * @brief Adds a @ref diagnostics::unittest::Test_Case which test implementation details. * * The name of Test_Case is set to #FUNC (a leading '&' is removed), * and it is only placed into @ref diagnostics::LEVEL_PROD. It is added to the * @ref diagnostics::unittest::Test_Suite NAME/impl. The timeout is set to 3sec. * * @param FUNC a procedure or object with the signature void * operator()(@ref diagnostics::unittest::Test_Data & test_data) const */ #define TEST_IMPL_CASE(FUNC) \ ::diagnostics::unittest::internal::fct_test_case_add((FUNC),(#FUNC[0]=='&' ? #FUNC + 1 : #FUNC),3,true,::diagnostics::LEVEL_PROD,impl_test_suite) /** * @brief Adds a @ref diagnostics::unittest::Test_Suite * * @param FUNC a procedure which generates the suite or a directly a * suite. */ #define TEST_ADD_SUITE(FUNC) test_suite->add(FUNC) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_case_cstr.t.cpp0000644000076500000240000001427311172433106021111 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_case_cstr.t.cpp * * @brief [LEVEL: beta] testing test_case_cstr.hpp * * $Id: test_case_cstr.t.cpp,v 1.10 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #define TEST_COMPONENT_NAME Test_Case_Cstr #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; class Test_Function_Object { public: Test_Function_Object(int const i) { } void operator()(Test_Data & test_data) const { // just to check for the call throw Test_Exception("xxx"); } }; void test_function(Test_Data & test_data) { // just to check for the call throw Test_Exception("xxx"); } /** * @brief [PRO] fct/normal: normal composition */ void normal_composition(Test_Data & test_data) { // a test_suite with all variations which are offered by the macros of test_case_cstr.hpp TEST_BUILD_TEST_SYSTEM("test_suite"); TEST_NORMAL_CASE(Test_Function_Object(0),LEVEL_PROD); TEST_NORMAL_CASE(Test_Function_Object(1),LEVEL_DEBUG); TEST_NORMAL_CASE(Test_Function_Object(2),LEVEL_AUDIT); TEST_ABNORMAL_CASE(Test_Function_Object(3),LEVEL_PROD); TEST_ABNORMAL_CASE(Test_Function_Object(4),LEVEL_DEBUG); TEST_ABNORMAL_CASE(Test_Function_Object(5),LEVEL_AUDIT); TEST_NONFCT_CASE(Test_Function_Object(6),10); // all debug levels with all matching mask TEST_ASSERT(test_data.compare("list_all",dump_test_suite(test_suite,"/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("list_audit",dump_test_suite(test_suite,"/*",LEVEL_AUDIT))); TEST_ASSERT(test_data.compare("list_debug",dump_test_suite(test_suite,"/*",LEVEL_DEBUG))); TEST_ASSERT(test_data.compare("list_prod",dump_test_suite(test_suite,"/*",LEVEL_PROD))); // LEVEL_TEST with all subbranches TEST_ASSERT(test_data.compare("list_fct",dump_test_suite(test_suite,"/*/fct/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("list_fct_normal",dump_test_suite(test_suite,"/*/fct/normal/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("list_fct_abnormal",dump_test_suite(test_suite,"/*/fct/abnormal/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("list_nonfct",dump_test_suite(test_suite,"/*/nonfct/*",LEVEL_TEST))); // an intersection TEST_ASSERT(test_data.compare("list_fct_abnormal_deb",dump_test_suite(test_suite,"/*/fct/abnormal/*",LEVEL_DEBUG))); // an empty intersection TEST_ASSERT(test_data.compare("list_nonfct_deb",dump_test_suite(test_suite,"/*/nonfct/*",LEVEL_DEBUG))); // adding same test twice -- but in different suites is not very sensible, but allowed. TEST_ABNORMAL_CASE(Test_Function_Object(0),LEVEL_PROD); TEST_NONFCT_CASE(Test_Function_Object(3),0); TEST_NORMAL_CASE(Test_Function_Object(6),LEVEL_DEBUG); // listing all again TEST_ASSERT(test_data.compare("list_all_expanded",dump_test_suite(test_suite,"/*",LEVEL_TEST))); } /** * @brief [PRO] fct/abnormal: erronous composition (double names, negative timeout) */ void erronous_composition_attempts(Test_Data & test_data) { // a test_suite with all variations which are offered by the macros of test_case_cstr.hpp // same as in normal_composition. TEST_BUILD_TEST_SYSTEM("test_suite"); TEST_NORMAL_CASE(Test_Function_Object(0),LEVEL_PROD); TEST_NORMAL_CASE(Test_Function_Object(1),LEVEL_DEBUG); TEST_NORMAL_CASE(Test_Function_Object(2),LEVEL_AUDIT); TEST_ABNORMAL_CASE(Test_Function_Object(3),LEVEL_PROD); TEST_ABNORMAL_CASE(Test_Function_Object(4),LEVEL_DEBUG); TEST_ABNORMAL_CASE(Test_Function_Object(5),LEVEL_AUDIT); TEST_NONFCT_CASE(Test_Function_Object(6),10); // all debug levels with all matching mask TEST_ASSERT(test_data.compare("list_all",dump_test_suite(test_suite,"/*",LEVEL_TEST))); // adding into normal again TEST_THROWING_BLOCK_ENTER; TEST_NORMAL_CASE(Test_Function_Object(0),LEVEL_PROD); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // adding into abnormal again TEST_THROWING_BLOCK_ENTER; TEST_ABNORMAL_CASE(Test_Function_Object(3),LEVEL_PROD); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // adding into nonfct again TEST_THROWING_BLOCK_ENTER; TEST_NONFCT_CASE(Test_Function_Object(6),10); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // adding with negative timeout TEST_THROWING_BLOCK_ENTER; TEST_NONFCT_CASE(Test_Function_Object(6),-1); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // all debug levels with all matching mask -- same string -- id TEST_ASSERT(test_data.compare("list_all",dump_test_suite(test_suite,"/*",LEVEL_TEST))); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&normal_composition,LEVEL_PROD); TEST_ABNORMAL_CASE(&erronous_composition_attempts,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_data.cpp0000644000076500000240000000310611172433106017603 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_data.cpp * * @brief [LEVEL: beta] implementation @ref diagnostics::unittest::Test_Data interface * * $Id: test_data.cpp,v 1.7 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Data::~Test_Data() { } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_data.hpp0000644000076500000240000000677011172433106017622 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_data.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Data Interface * * $Id: test_data.hpp,v 1.15 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__TEST_DATA_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_DATA_HPP__INCLUDE_GUARD #include #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Test_Data diagnostics/unittest/test_data.hpp * * @brief A Test_Data Interface is supplied to each @ref Test_Case * when its run method is called to access test-relevant data. * * The @ref Test_Case can use this interface to obtain data by using * the @ref get method and to check whether some results match by * invoking the @ref compare method. The handling in the case of an * error (non-existing entry or mismatch) depends on the underlying * implementation. * * @note A concrete implementation might interact with the user in the * case of an error and allow the user to modify the underlying * Test_Data. This is useful for building up Test_Data for Test_Cases. * * @nosubgrouping */ class Test_Data { public: /** * @brief noop * * @throw never */ virtual ~Test_Data(); //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief gives a reference to the string with @a id * * @throw Test_Exception if no string with @a id can be supplied * * @throw Test_System_Exception if an internal error occurs (not * caused by the testcase but by the test environment). */ virtual ::std::string const & get(::std::string const & id) const =0; /** * @brief compares @a data with the string of @a id (returns * true in case of a match) * * @throw Test_Exception if no string with @a id can be supplied. * * @throw Test_System_Exception if an internal error occurs (not * caused by the testcase but by the test environment). */ virtual bool compare(::std::string const & id,::std::string const & data) const =0; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_exception.cpp0000644000076500000240000000331611172433106020673 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_exception.cpp * * @brief [LEVEL: beta] implementation of @ref * diagnostics::unittest::Test_Exception * * $Id: test_exception.cpp,v 1.8 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Exception::~Test_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } char const * Test_Exception::name() const { return "Test_Exception"; } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_exception.hpp0000644000076500000240000000511611172433106020700 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_exception.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Exception * * $Id: test_exception.hpp,v 1.11 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__TEST_EXCEPTION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_EXCEPTION_HPP__INCLUDE_GUARD #include // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Test_Exception diagnostics/unittest/test_exception.hpp * * @brief Thrown if the test system detects an error of a @ref * Test_Case. USe this exception for errors which are detected by the * test-driver. * * For example, if a @ref Test_Case tries to get a string from @ref * Test_Data which does not exist, @ref Test_Data will throw a * Test_Exception. * * Or, as another example, @ref TEST_ASSERT throws a Test_Exception. * * @nosubgrouping */ class Test_Exception : public Std_Exception { public: /** * @throw never */ inline Test_Exception(::std::string const & what) : Std_Exception(what) { } /** * @throw never */ virtual ~Test_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; /** * @throw never */ virtual char const * name() const; }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_suite.cpp0000644000076500000240000000666611172433106020041 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_suite.cpp * * @brief [LEVEL: beta] implementation of @ref * diagnostics::unittest::Test_Suite class * * $Id: test_suite.cpp,v 1.6 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Suite::Test_Suite(::std::string const & name) : m_name(name) { if(!name_adheres_convention(name)) throw Test_System_Exception("The Test_Suite name does not comply to the conventions"); } Test_Suite::~Test_Suite() { { Test_Cases_t::iterator current(m_test_cases.begin()); Test_Cases_t::iterator const end (m_test_cases.end()); for(;current!=end;++current) delete *current; } { Test_Suites_t::iterator current(m_test_suites.begin()); Test_Suites_t::iterator const end (m_test_suites.end()); for(;current!=end;++current) delete *current; } } void Test_Suite::add(Test_Case* const test_case) { if(test_case==NULL) throw Test_System_Exception("test_case==NULL"); if(test_case->name().size()==0) throw Test_System_Exception("tried to a add an unnamed test_case"); Test_Cases_t::const_iterator current(m_test_cases.begin()); Test_Cases_t::const_iterator const end (m_test_cases.end()); for(;current!=end;++current) if((*current)->name()==test_case->name()) throw Test_System_Exception("A Test_Case with name " + test_case->name() + " already exists."); m_test_cases.push_back(test_case); } void Test_Suite::add(Test_Suite* const test_suite) { if(test_suite==NULL) throw Test_System_Exception("test_suite==NULL"); if(test_suite->name().size()==0) throw Test_System_Exception("tried to a add an unnamed test_suite"); Test_Suites_t::const_iterator current(m_test_suites.begin()); Test_Suites_t::const_iterator const end (m_test_suites.end()); for(;current!=end;++current) if((*current)->name()==test_suite->name()) throw Test_System_Exception("A Test_Suite with name " + test_suite->name() + " already exists."); m_test_suites.push_back(test_suite); } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_suite.hpp0000644000076500000240000001340011172433106020026 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_suite.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Suite class * * $Id: test_suite.hpp,v 1.14 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_suite.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SUITE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SUITE_HPP__INCLUDE_GUARD #include #include // used in the interface by reference // used in the implementation by value #include // used in the interface by reference // used in the implementation by value #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by pointer // class Test_Case; /** * @class Test_Suite diagnostics/unittest/test_suite.hpp * * @brief a Test_Suite is a container for Test_Cases and other Test_Suites * * The unittest system allows to arrange Test_Cases in a hierarchical * manner, i.e., they can be grouped together into Test_Suites. A * number of Test_Suites can be grouped together in another * Test_Suite. In other words, Test_Suites can be arranged in a tree * with nodes of unbounded degree where each leave if a @ref Test_Case * or an empty Test_Suite. * * @nosubgrouping */ class Test_Suite { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Test_Suite Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: /** * @brief no default cstr */ Test_Suite(); /** * @brief no copy cstr */ Test_Suite(Self const & other); /** * @brief no assignement */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief destroys all sub-Test_Suites and Test_Cases * * @throw never */ ~Test_Suite(); /** * @brief the only way to construct a Test_Suite * * @throw Test_System_Exception if @a name does not match the * naming convention, i.e., it contains a @ref * DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR or a @ref * DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR */ explicit Test_Suite(::std::string const & name); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: /** * @brief add a Test_Case to the Test_Suite (transfers ownership) * * @arg @a test_case has an empty string as name * @arg @a test_case->name().size()!=0 * @arg there is a already a Test_Case which has the same name as @a test_case * * @throw Test_System_Exception */ void add(Test_Case* const test_case); /** * @brief add a Test_Suite to the Test_Suite (transfers ownership) * * @arg @a test_suite has an empty string as name * @arg @a test_suite->name().size()!=0 * @arg there is a already a Test_Suite which has the same name as @a test_suite * * @throw Test_System_Exception */ void add(Test_Suite* const test_suite); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: typedef ::std::vector Test_Cases_t; typedef ::std::vector Test_Suites_t; /** * @brief the Test_Suites directly owned by the Test_Suite (i.e., excluding * the Test_Suites which are owned by sub-Test_Suites). * * @throw never */ Test_Suites_t const & test_suites() const { return m_test_suites; } /** * @brief the Test_Cases directly owned by the Test_Suite (i.e., excluding * the Test_Cases which are owned by sub-Test_Suites). * * @throw never */ Test_Cases_t const & test_cases() const { return m_test_cases; } /** * @brief the name of the Test_Suite * * @throw never */ ::std::string const & name() const { return m_name; } // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::string const m_name; Test_Cases_t m_test_cases; Test_Suites_t m_test_suites; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_suite.t.cpp0000644000076500000240000001510511172433106020267 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_suite.t.cpp * * @brief [LEVEL: beta] testing @ref * diagnostics::unittest::Test_Suite * * $Id: test_suite.t.cpp,v 1.12 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart */ #include #include // used components #include #include #include // test support #include #define TEST_COMPONENT_NAMESPACE diagnostics::unittest #define TEST_COMPONENT_NAME Test_Suite DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief [PRO] fct/normal: normal usage */ void std_usage(Test_Data & test_data) { Test_Suite s("suite"); TEST_ASSERT(s.name()=="suite"); TEST_ASSERT(s.test_cases().size()==0); TEST_ASSERT(s.test_suites().size()==0); Stupid_Test_Case *t(new Stupid_Test_Case("case")); s.add(t); TEST_ASSERT(s.test_cases().size()==1); Stupid_Test_Case *t2(new Stupid_Test_Case("case2")); s.add(t2); TEST_ASSERT(s.test_cases().size()==2); Test_Suite *s2(new Test_Suite("suite2")); s.add(s2); TEST_ASSERT(s.test_suites().size()==1); Test_Suite *s3(new Test_Suite("suite3")); s.add(s3); TEST_ASSERT(s.test_suites().size()==2); } /** * @brief [PRO] fct/abnormal: invalid attempts to add a @ref Test_Case */ void invalid_case_adds(Test_Data & test_data) { // valid beginning Test_Suite s("suite"); Stupid_Test_Case *t(new Stupid_Test_Case("case")); s.add(t); TEST_ASSERT(s.test_cases().size()==1); // same name TEST_THROWING_BLOCK_ENTER; Stupid_Test_Case *t2(new Stupid_Test_Case("case")); // never mind the leak s.add(t2); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(s.test_cases().size()==1); // NULL pointer TEST_THROWING_BLOCK_ENTER; s.add(static_cast(NULL)); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(s.test_cases().size()==1); // correct usage to check Stupid_Test_Case *t2(new Stupid_Test_Case("case2")); s.add(t2); TEST_ASSERT(s.test_cases().size()==2); } /** * @brief [PRO] fct/abnormal: invalid attempts to add another Test_Suite */ void invalid_suite_adds(Test_Data & test_data) { // valid beginning Test_Suite s("suite"); Test_Suite *s2=new Test_Suite("suite2"); s.add(s2); TEST_ASSERT(s.test_suites().size()==1); // same name TEST_THROWING_BLOCK_ENTER; Test_Suite *s3(new Test_Suite("suite2")); // never mind the leak s.add(s3); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(s.test_suites().size()==1); // NULL pointer TEST_THROWING_BLOCK_ENTER; s.add(static_cast(NULL)); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(s.test_suites().size()==1); // empty name TEST_THROWING_BLOCK_ENTER; Test_Suite *s3(new Test_Suite("")); // never mind the leak s.add(s3); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(s.test_suites().size()==1); // correct usage to check Test_Suite *s3(new Test_Suite("suite3")); s.add(s3); TEST_ASSERT(s.test_suites().size()==2); } /** * @brief [PRO] fct/abnormal: invalid construction attempts (case separator) */ void case_seperator(Test_Data & test_data) { // at the end TEST_THROWING_BLOCK_ENTER; Test_Suite t("name1" DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // at the beginning TEST_THROWING_BLOCK_ENTER; Test_Suite t(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR "name1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // in the middle TEST_THROWING_BLOCK_ENTER; Test_Suite t("name" DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR "name1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // solely the separator TEST_THROWING_BLOCK_ENTER; Test_Suite t(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR "name1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } /** * @brief [PRO] fct/abnormal: invalid construction attempts (data separator) */ void data_seperator(Test_Data & test_data) { // at the end TEST_THROWING_BLOCK_ENTER; Test_Suite t("name1" DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // at the beginning TEST_THROWING_BLOCK_ENTER; Test_Suite t(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR "name1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // in the middle TEST_THROWING_BLOCK_ENTER; Test_Suite t("name" DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR "name1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // solely the separator TEST_THROWING_BLOCK_ENTER; Test_Suite t(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR "name1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&std_usage,LEVEL_PROD); TEST_ABNORMAL_CASE(&invalid_case_adds,LEVEL_PROD); TEST_ABNORMAL_CASE(&invalid_suite_adds,LEVEL_PROD); TEST_ABNORMAL_CASE(&case_seperator,LEVEL_PROD); TEST_ABNORMAL_CASE(&data_seperator,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/0000755000076500000240000000000011567507571017612 500000000000000diagnostics-0.3.3/diagnostics/unittest/test_system/current_test_logger.cpp0000644000076500000240000000637511172433105024310 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/current_test_logger.cpp * * $Id$ * * @author Christian Schallhart * * @brief Implementation of @ref diagnostics::unittest::internal::Current_Test_Logger */ #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; class Current_Test_Logger_Implementation { private: typedef ::std::stack< ::std::pair > Stack_t; typedef Current_Test_Logger_Implementation Self; static Self * m_instance; inline Current_Test_Logger_Implementation() { } Stack_t m_stack; public: inline static Self * instance(); static Stack_t & stack(); }; Current_Test_Logger_Implementation * Current_Test_Logger_Implementation::instance() { if(m_instance==NULL) m_instance=new Self; return m_instance; } Current_Test_Logger_Implementation::Stack_t & Current_Test_Logger_Implementation::stack() { return instance()->m_stack; } Current_Test_Logger_Implementation * Current_Test_Logger_Implementation::m_instance=NULL; void Current_Test_Logger::push_logger(Logger * const logger) { Current_Test_Logger_Implementation::stack().push(::std::pair(logger,false)); register_logger(); } void Current_Test_Logger::pop_logger() { unregister_logger(); Current_Test_Logger_Implementation::stack().pop(); } void Current_Test_Logger::unregister_logger() { if(Current_Test_Logger_Implementation::stack().top().second){ Logging_Config::unregister_logger(Current_Test_Logger_Implementation::stack().top().first); Current_Test_Logger_Implementation::stack().top().second=false; } } void Current_Test_Logger::register_logger() { if(!Current_Test_Logger_Implementation::stack().top().second){ Logging_Config::register_logger(Current_Test_Logger_Implementation::stack().top().first); Current_Test_Logger_Implementation::stack().top().second=true; } } INTERNAL_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/current_test_logger.hpp0000644000076500000240000001633011172433105024305 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/current_test_logger.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref diagnostics::unittest::internal::Current_Test_Logger * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__CURRENT_TEST_LOGGER__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__CURRENT_TEST_LOGGER__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; // used by reference in the interface // diagnostics/frame/logger.hpp class Logger; UNITTEST_NAMESPACE_BEGIN; // used as friend in the interface // diagnostics/unittest/test_system/run_test_suite_traversal.hpp class Run_Test_Suite_Traversal; INTERNAL_NAMESPACE_BEGIN; /** * @brief This class is for internal test purposes -- to switch on/off * the test logger. * * @attention To use this library, it is not necessary to understand * this clss. You only need this class if you intend to use * diagnostics to test diagnostics. * * @attention This class is only allowd to be used by @ref * Test_Run_Result and @ref No_Implicit_Test_Logging_Guard. If you use * this, make sure you really need it. The user interface is @ref * TEST_NO_IMPLICIT_LOGGING_ENTER and @ref * TEST_NO_IMPLICIT_LOGGING_EXIT. * * More precisely, when testing the testing facilities, it is * sometimes necessary to remove the @ref Test_Logger from the @ref * Record stream, since the occuring records are test-relevant -- but * their occurence is PART OF CURRENT TESTCASE and does NOT DESCRIBE * THE TESTCASE at hand. * * Therefore, we need a possibilty to remove the logger temporarily * from the stream; the records occuring in the meantime are not * included in the final assessment of the testcase (since they are * not logged by the correpsonding @ref Test_Logger). * * To make things worse, if we test a @ref Run_Test_Suite_Traversal * (directly or indirectly) with this framework, the following situation arises: * * @arg Run_Test_Suite_Traversal.traverse() * @arg ... Testing Code * @arg ... ... Tested Code * @arg ... ... ... Run_Test_Suite_Traversal.traverse() * @arg ... ... ... ... Testing Code (for testing the testing) * @arg ... ... ... ... ... Tested Code (for testing the testing) * * In this case, both calls to @ref Run_Test_Suite_Traversal::traverse * will install their own @ref Test_Logger. * * But we would like to remove the first, while the second one stays * in place to be tested. * * Therefore, Current_Test_Logger contains a stack of @ref * Test_Logger. The calls to @ref unregister_logger and @ref * register_logger disable/enable the last installed logger. * * The occuring calling sequence to resolve the above example: * @arg Run_Test_Suite_Traversal.traverse() * @arg ... Run_Test_Suite_Traversal calls push_logger(logger1) * @arg ... Testing Code * @arg ... ... unregister_logger() * @arg ... ... Tested Code * @arg ... ... ... Run_Test_Suite_Traversal.traverse() * @arg ... ... ... ... Run_Test_Suite_Traversal calls push_logger(logger2) * @arg ... ... ... ... Testing Code (for testing the testing) * @arg ... ... ... ... ... Tested Code (for testing the testing) * @arg ... ... ... ... Run_Test_Suite_Traversal calls pop_logger() * @arg ... ... register_logger() * @arg ... Run_Test_Suite_Traversal calls pop_logger() * * @note long distance friend ship (to @ref Run_Test_Suite_Traversal) * is used, since this class should not be part of the interface * (Run_Test_Suite_Traversal), the common user relies on. * * @nosubgrouping */ struct Current_Test_Logger { //////////////////////////////////////////////////////////////////////////////// /** * @name Interface for Nested Testing * @{ */ public: /** * @brief switches on the current top-level @ref Test_Logger. If * the current top-level @ref Test_Logger is already switched on, * this is a noop. * * @post the last pushed @ref Test_Logger is active * * @throw never */ static void unregister_logger(); /** * @brief switches off the current top-level @ref Test_Logger. If * the current top-level @ref Test_Logger is already switched off, * this is a noop. * * @post the last pushed @ref Test_Logger is passive * * @throw never */ static void register_logger(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Interface for ::diagnostics::unittest::Run_Test_Suite_Traversal * @{ */ private: friend class ::diagnostics::unittest::Run_Test_Suite_Traversal; /** * @brief Set the current top-level @ref Test_Logger and activates * it. * * @throw never */ static void push_logger(Logger * const logger); /** * @brief Deactivates the current top-level @ref Test_Logger and * removes it from the stack. * * @pre for each call to pop, there must be a call to push beforehand. * * @attention: not meeting the precondition means undefined behavior. * * throw never */ static void pop_logger(); // @} }; /** * @class No_Implicit_Test_Logging_Guard * * @brief A guard for calling @ref * Current_Test_Logger::unregister_logger and later @ref * Current_Test_Logger::register_logger. * * @nosubgrouping */ struct No_Implicit_Test_Logging_Guard { inline No_Implicit_Test_Logging_Guard() { Current_Test_Logger::unregister_logger(); } inline ~No_Implicit_Test_Logging_Guard() { Current_Test_Logger::register_logger(); } }; /** * @brief A block with no implicit test logging. The current top-level * @ref ::diagnostics::unittest::Test_Logger is removed from the @ref * ::diagnostics::Logging_Config during the block. Use with extreme * care. Only provided internally, to test some test facilities. */ #define TEST_NO_IMPLICIT_LOGGING_ENTER { ::diagnostics::unittest::internal::No_Implicit_Test_Logging_Guard guard; { #define TEST_NO_IMPLICIT_LOGGING_EXIT }} INTERNAL_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/file_test_data_source.cpp0000644000076500000240000001216611335633241024556 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/file_test_data_source.cpp * * @brief [LEVEL: alpha] Implementation @ref diagnostics::unittest::File_Test_Data_Source class * * $Id: file_test_data_source.cpp,v 1.7 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; File_Test_Data_Source::File_Test_Data_Source() : m_initialized(false) { } File_Test_Data_Source::~File_Test_Data_Source() { } void File_Test_Data_Source::init(::std::string const & file_name) { m_data=Data_t(); m_initialized=true; m_modified=false; m_file_name=file_name; } bool File_Test_Data_Source::is_initialized() const { return m_initialized; } void File_Test_Data_Source::load(::std::string const & file_name) { using namespace ::diagnostics::internal; ::std::ifstream file(file_name.c_str(), ::std::ios::in | ::std::ios::binary); if(!file.good()) throw Test_System_Exception("Could not open " + file_name); int const header_length=512; char header[header_length]; for(int i=0;i<512;++i) header[i]='c'; file.read(header,header_length); if(!file.good()) throw Test_System_Exception("Error while reading header of " + file_name); Data_t new_data; if(!read(file,new_data)) throw Test_System_Exception("Error while reading data from " + file_name); // nothing changed in this about this line -- no exceptions down here m_initialized=false; m_file_name=file_name; ::std::swap(m_data,new_data); m_initialized=true; m_modified=false; } void File_Test_Data_Source::save(::std::string const & file_name) { save(file_name,false); } void File_Test_Data_Source::save(::std::string const & file_name, bool const force) { using namespace ::diagnostics::internal; if(!m_initialized) throw Test_System_Exception("Attempt to save an uninitialized File_Test_Data_Source"); // unmodified file -- no force if(!m_modified && file_name==m_file_name && !force) return; ::std::ofstream file(file_name.c_str()); if(!file.good()) throw Test_System_Exception("Could not open " + file_name); int const header_length=512; char header[header_length]; for(int i=0;i<512;++i) header[i]='c'; file.write(header,header_length); if(!file.good()) throw Test_System_Exception("Error while writing " + file_name); write(file,m_data); if(!file.good()) throw Test_System_Exception("Error while writing " + file_name); // nothing changed in this about this line -- no exceptions down here m_file_name=file_name; m_modified=false; } bool File_Test_Data_Source::is_modified() const { if(!m_initialized) throw Test_System_Exception("Uninitialized File_Test_Data_Source"); return m_modified; } ::std::string const & File_Test_Data_Source::file_name() const { if(!m_initialized) throw Test_System_Exception("Uninitialized File_Test_Data_Source"); return m_file_name; } bool File_Test_Data_Source::exists_entry(::std::string const & id) const { if(!m_initialized) throw Test_System_Exception("Uninitialized File_Test_Data_Source"); return m_data.end()!=m_data.find(id); } ::std::string const & File_Test_Data_Source::get_entry(::std::string const & id) const { if(!m_initialized) throw Test_System_Exception("Uninitialized File_Test_Data_Source"); Data_t::const_iterator iter(m_data.find(id)); if(iter==m_data.end()) throw Test_System_Exception("Entry with ID: "+id+" does not exist"); return iter->second; } void File_Test_Data_Source::set_entry(::std::string const & id, ::std::string const & value) { if(!m_initialized) throw Test_System_Exception("Uninitialized File_Test_Data_Source"); m_data[id]=value; m_modified=true; } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/file_test_data_source.hpp0000644000076500000240000001676111172433105024564 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/file_test_data_source.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::File_Test_Data_Source class * * $Id: file_test_data_source.hpp,v 1.7 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/file_test_data_source.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__FILE_TEST_DATA_SOURCE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__FILE_TEST_DATA_SOURCE_HPP__INCLUDE_GUARD // used as base class #include // used in the implementation by value #include // used in the implementation by value #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class File_Test_Data_Source diagnostics/unittest/test_system/file_test_data_source.hpp * * @brief A @ref Test_Data_Source implementation which loads from and * stores to a file. * * @nosubgrouping */ class File_Test_Data_Source : public Test_Data_Source { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef ::std::map< ::std::string, ::std::string> Data_t; typedef File_Test_Data_Source Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: File_Test_Data_Source(Self const &); Self & operator=(Self const &); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief noop * * @throw never */ virtual ~File_Test_Data_Source(); /** * @brief sets is_initialized()==false * * @throw never */ File_Test_Data_Source(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Configuration * @{ */ public: /** * @brief Initilizes with a file_name but without any entries. Useful for * starting a new file. Throws aways all old information! * * @post POST.is_initialized()==true * @post POST.is_modified()==false * @post POST.file_name()==@a file_name * @post forall A POST.exists_entry(A)==false * * @throw never */ void init(::std::string const & file_name); /** * @brief The File_Test_Data_Source is initialized to @a * file_name and with an EMPTY set of test data entries. * * @post POST.is_initialized()==true * @post POST.is_modified()==false * @post POST.file_name()==@a file_name * @post POST contains no entries * * @throw never */ void load(::std::string const & file_name); /** * @brief Tries to open @a file_name and to save its current * entries to it. No backup is made before the writing is started. * * @pre is_initialized()==true * @pre (is_modified()==true || @a file_name!=file_name()) --> @a file_name can be opened, enough space exists * * @post POST.is_modified()==false * @post POST.file_name()==@a file_name * @post PRE.is_modified()==true || PRE.file_name()!=@ a file_name * --> a file @a file_name is created/overwritten with the entries * of this * * @throw Test_System_Exception if the preconditions are not met * (nothing changed -- however, the file @a file_name is an * undefined state) */ void save(::std::string const & file_name); /** * @brief Tries to open @a file_name and to save its current * entries to it. No backup is made before the writing is started. * * @pre is_initialized()==true * @pre (is_modified()==true || @a file_name!=file_name() || @a force) * --> @a file_name can be opened, enough space exists * * @post POST.is_modified()==false * @post POST.file_name()==@a file_name * @post (PRE.is_modified()==true || PRE.file_name()!=@ a file_name || @a froce) * --> a file @a file_name is created/overwritten with the entries * of this * * @throw Test_System_Exception if the preconditions are not met * (nothing changed -- however, the file @a file_name is an * undefined state) */ void save(::std::string const & file_name, bool const force); /** * @brief true if the set of entries has been modified by a call * to @ref set_entry * * @pre is_initialized()==true * * @throw if the precondition is not met. */ bool is_modified() const; /** * @brief the currently associated file_name. * * @pre is_initialized()==true * * @throw if the precondition is not met. */ ::std::string const & file_name() const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Implementation of the @ref Test_Data_Source interface * @{ */ public: /** * @brief returns true if the contained set of entries is in a * defined state. * * @throw never */ virtual bool is_initialized() const; /** * @brief true iff an entry with @a id exists. * * @pre is_initialized()==true * * @throw Test_System_Exception if the precondition is not met */ virtual bool exists_entry(::std::string const & id) const; /** * @brief retuns the entry with @a id * * @pre is_initialized()==true * @pre exists_entry(@a id)==true * * @throw Test_System_Exception if a precondition is not met */ virtual ::std::string const & get_entry(::std::string const & id) const; /** * @brief sets the string with @a id to @a value * * @pre is_initialized()==true * @post POST.get_entry(@a id)==@a value * @post POST.is_modified()==true * * @throw Test_System_Exception if the precondition is not met. */ virtual void set_entry(::std::string const & id, ::std::string const & value); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: bool m_initialized; ::std::string m_file_name; bool m_modified; Data_t m_data; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/file_test_data_source.t.cpp0000644000076500000240000002060511172433105025011 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/file_test_data_source.t.cpp * * @brief [LEVEL: alpha] testing @ref diagnostics::unittest::File_Test_Data_Source * * $Id: file_test_data_source.t.cpp,v 1.11 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart */ #include // tested component #include #include // test support #include #define NONEXISTINGTESTFILENAME "test/file_test_data_source.nonexisting.testfile" #define TESTFILENAME "test/file_test_data_source.testfile" #define TEST_COMPONENT_NAME File_Test_Data_Source #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief [PRO] fct/normal: testing the default-cstr. */ void creation(Test_Data & data) { File_Test_Data_Source s; TEST_ASSERT(s.is_initialized()==false); TEST_THROWING_BLOCK_ENTER; s.is_modified(); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; s.file_name(); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; s.exists_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; s.get_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; s.set_entry("x","y"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(s.is_initialized()==false); } /** * @brief [PRO] fct/normal: testing init */ void init(Test_Data & data) { File_Test_Data_Source s; TEST_ASSERT(s.is_initialized()==false); TEST_THROWING_BLOCK_ENTER; s.is_modified(); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); s.init(NONEXISTINGTESTFILENAME); TEST_ASSERT(s.is_initialized()==true); TEST_ASSERT(s.is_modified()==false); TEST_ASSERT(s.file_name()==NONEXISTINGTESTFILENAME); TEST_ASSERT(s.exists_entry("x")==false); TEST_THROWING_BLOCK_ENTER; s.get_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } /** * @brief [PRO] fct/normal: the methods of @ref Test_Data_Source * interface -- together with the is_modified() * * @attention: One property can only be tested in the conext of * save/load, namely the the interplay between set_entry and * is_modified in the context of an already loaded database. */ void exists_set_get_modified(Test_Data & data) { File_Test_Data_Source s; s.init(NONEXISTINGTESTFILENAME); TEST_ASSERT(s.is_modified()==false); TEST_ASSERT(s.exists_entry("x")==false); TEST_THROWING_BLOCK_ENTER; s.get_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(s.is_modified()==false); // set now s.set_entry("x","y"); TEST_ASSERT(s.is_modified()==true); TEST_ASSERT(s.get_entry("x")=="y"); TEST_THROWING_BLOCK_ENTER; s.get_entry("x1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // set another one s.set_entry("x1","y1"); TEST_ASSERT(s.is_modified()==true); TEST_ASSERT(s.get_entry("x")=="y"); TEST_ASSERT(s.get_entry("x1")=="y1"); TEST_THROWING_BLOCK_ENTER; s.get_entry("x2"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // overwrite s.set_entry("x","Y"); TEST_ASSERT(s.is_modified()==true); TEST_ASSERT(s.get_entry("x")=="Y"); TEST_ASSERT(s.get_entry("x1")=="y1"); TEST_THROWING_BLOCK_ENTER; s.get_entry("x2"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // reinit s.init(NONEXISTINGTESTFILENAME); TEST_ASSERT(s.is_modified()==false); TEST_THROWING_BLOCK_ENTER; s.get_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; s.get_entry("x1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } /** * @brief [PRO] fct/normal: saving and loading. This test generates * two files test/file_test_data_source.testfile{2|} -- but is * independent of whether these files exist or not. */ void save_load(Test_Data & data) { File_Test_Data_Source s; // loading non existing file TEST_THROWING_BLOCK_ENTER; s.load(NONEXISTINGTESTFILENAME); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // init s.init(TESTFILENAME); TEST_ASSERT(s.is_modified()==false); TEST_THROWING_BLOCK_ENTER; s.get_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // set now s.set_entry("x","y"); s.set_entry("x1","y1"); s.set_entry("x","Y"); TEST_ASSERT(s.is_modified()==true); s.save(TESTFILENAME); TEST_ASSERT(s.is_initialized()==true); TEST_ASSERT(s.is_modified()==false); TEST_ASSERT(s.file_name()==TESTFILENAME); // load into another source File_Test_Data_Source s2; s2.load(TESTFILENAME); TEST_ASSERT(s2.is_initialized()==true); TEST_ASSERT(s2.is_modified()==false); TEST_ASSERT(s2.file_name()==TESTFILENAME); TEST_ASSERT(s2.get_entry("x")=="Y"); TEST_ASSERT(s2.get_entry("x1")=="y1"); // overwrite -- no change -- still is_modified turns true s2.set_entry("x1","y1"); TEST_ASSERT(s2.get_entry("x1")=="y1"); TEST_ASSERT(s2.is_modified()==true); // save into another file s2.save(TESTFILENAME "2"); TEST_ASSERT(s2.is_initialized()==true); TEST_ASSERT(s2.is_modified()==false); TEST_ASSERT(s2.file_name()==TESTFILENAME "2"); // init to TESTFILENAME "2" ///////////////////////////////// s2.init(TESTFILENAME "2"); TEST_ASSERT(s2.is_initialized()==true); TEST_ASSERT(s2.is_modified()==false); TEST_ASSERT(s2.file_name()==TESTFILENAME "2"); // save to TESTFILENAME "2" -- NO FORCE s2.save(TESTFILENAME "2"); // load TESTFILENAME "2" and check that it did not change s2.load(TESTFILENAME "2"); TEST_ASSERT(s2.is_initialized()==true); TEST_ASSERT(s2.is_modified()==false); TEST_ASSERT(s2.file_name()==TESTFILENAME "2"); TEST_ASSERT(s2.get_entry("x")=="Y"); TEST_ASSERT(s2.get_entry("x1")=="y1"); // init to TESTFILENAME "2" ///////////////////////////////// s2.init(TESTFILENAME "2"); TEST_ASSERT(s2.is_initialized()==true); TEST_ASSERT(s2.is_modified()==false); TEST_ASSERT(s2.file_name()==TESTFILENAME "2"); // save to TESTFILENAME "2" -- WITH FORCE ////////////////// s2.save(TESTFILENAME "2",true); // load TESTFILENAME "2" and check that it did not change s2.load(TESTFILENAME "2"); TEST_ASSERT(s2.is_initialized()==true); TEST_ASSERT(s2.is_modified()==false); TEST_ASSERT(s2.file_name()==TESTFILENAME "2"); TEST_ASSERT(!s2.exists_entry("x")); TEST_ASSERT(!s2.exists_entry("x1")); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&creation,LEVEL_PROD); TEST_NORMAL_CASE(&init,LEVEL_PROD); TEST_NORMAL_CASE(&exists_set_get_modified,LEVEL_PROD); TEST_NORMAL_CASE(&save_load,LEVEL_PROD); File_Test_Data_Source* source(new File_Test_Data_Source); source->init(NONEXISTINGTESTFILENAME); TEST_NORMAL_CASE(Test_Data_Source_Compliance(source, new File_Test_Data_Source),LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/filter_test_data.cpp0000644000076500000240000000463111172433105023536 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/filter_test_data.cpp * @brief [LEVEL: beta] implementation of @ref diagnostics::unittest::Filter_Test_Data class * * $Id: filter_test_data.cpp,v 1.9 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Filter_Test_Data::~Filter_Test_Data() { } Filter_Test_Data::Filter_Test_Data() : m_prefix(""), m_backend(NULL) { } void Filter_Test_Data::attach(::std::string const & prefix, Test_Data * const test_data) { if(test_data==NULL) throw Test_System_Exception("test_data_source==NULL"); m_prefix=prefix; m_backend=test_data; } ::std::string const & Filter_Test_Data::get(::std::string const & id) const { if(m_backend==NULL) throw Test_System_Exception("test_data_source==NULL"); return m_backend->get(m_prefix+id); } bool Filter_Test_Data::compare(::std::string const & id,::std::string const & data) const { if(m_backend==NULL) throw Test_System_Exception("test_data_source==NULL"); return m_backend->compare(m_prefix+id,data); } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/filter_test_data.hpp0000644000076500000240000001106511172433105023542 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/filter_test_data.hpp * @brief [LEVEL: beta] @ref diagnostics::unittest::Filter_Test_Data class * * $Id: filter_test_data.hpp,v 1.9 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/filter_test_data.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__FILTER_TEST_DATA_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__FILTER_TEST_DATA_HPP__INCLUDE_GUARD // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Filter_Test_Data diagnostics/unittest/test_system/filter_test_data.hpp * * @brief A @ref Test_Data implementation which uses another @ref * Test_Data implementation as backend. The calls to @ref * Test_Data::get and @ref Test_Data::compare are delegated to the * backend, but all ids are prefixed with a configurable string. * * @nosubgrouping */ class Filter_Test_Data : public Test_Data { //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief the only way -- backend()==NULL, prefix()=="" * * @throw never */ Filter_Test_Data(); /** * @throw never */ virtual ~Filter_Test_Data(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Configuration * @{ */ public: /** * @brief attaches @a backend using a @a prefix to this -- NO * ownership transfer. * * Once a backend is attached to this, the @ref get and @ref * compare methods can be used. * * @pre @a backend!=NULL * @post POST.backend() == @a backend * @post POST.prefix() == @a prefix * * @throw Test_System_Exception if the precondition is not satisfied */ void attach(::std::string const & prefix, Test_Data * const backend); /** * @brief returns the currently attached backend. * * @throw never */ inline Test_Data * backend() const { return m_backend; } /** * @brief return the currently used prefix. * * @throw never */ inline ::std::string const & prefix() const { return m_prefix; } // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Implementation of the @ref Test_Data interface * @{ */ public: /** * @brief equivalent to backend().get(prefix()+id) * * @throw Test_System_Exception if the underlying backend throws it or * if @ref backend()==NULL * @throw Test_Exception if the underlying backend throws it */ virtual ::std::string const & get(::std::string const & id) const; /** * @brief equivalent to backend().compare(prefix()+id,data) * * @throw Test_System_Exception if the underlying backend throws it or * if @ref backend()==NULL * @throw Test_Exception if the underlying backend throws it */ virtual bool compare(::std::string const & id,::std::string const & data) const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::string m_prefix; Test_Data * m_backend; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/filter_test_data.t.cpp0000644000076500000240000001147511172433105024004 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/filter_test_data.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Filter_Test_Data * * $Id: filter_test_data.t.cpp,v 1.10 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include // test support #include #define TEST_COMPONENT_NAME Filter_Test_Data #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; void attaching(Test_Data & test_data) { Dummy_Test_Data data; Filter_Test_Data filter; TEST_ASSERT(filter.backend()==NULL); TEST_ASSERT(filter.prefix()==""); TEST_THROWING_BLOCK_ENTER; filter.get(""); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; filter.compare("1","2"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); filter.attach("",&data); TEST_ASSERT(filter.backend()==&data); TEST_ASSERT(filter.prefix()==""); filter.attach("1",&data); TEST_ASSERT(filter.backend()==&data); TEST_ASSERT(filter.prefix()=="1"); TEST_THROWING_BLOCK_ENTER; filter.attach("",NULL); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(filter.backend()==&data); TEST_ASSERT(filter.prefix()=="1"); } void zero_filtering(Test_Data & test_data) { Dummy_Test_Data data; Filter_Test_Data filter; filter.attach("",&data); typedef Dummy_Test_Data::Data_t::const_iterator Iter_t; Iter_t cur(data.data().begin()); Iter_t const end(data.data().end()); for(;cur!=end;++cur){ TEST_ASSERT(data.get(cur->first)==cur->second); TEST_ASSERT(data.get(cur->first)==filter.get(cur->first)); } TEST_THROWING_BLOCK_ENTER; data.get("NOT CONTAINED"); TEST_THROWING_BLOCK_EXIT(Test_Exception); TEST_THROWING_BLOCK_ENTER; filter.get("NOT CONTAINED"); TEST_THROWING_BLOCK_EXIT(Test_Exception); TEST_THROWING_BLOCK_ENTER; data.compare("NOT CONTAINED","x"); TEST_THROWING_BLOCK_EXIT(Test_Exception); TEST_THROWING_BLOCK_ENTER; filter.compare("NOT CONTAINED","x"); TEST_THROWING_BLOCK_EXIT(Test_Exception); } void filtering1(::std::string const & prefix, Test_Data & test_data) { typedef Dummy_Test_Data::Data_t::const_iterator Iter_t; Dummy_Test_Data data; Filter_Test_Data filter; filter.attach(prefix,&data); ::std::string result; Iter_t cur(data.data().begin()); Iter_t const end(data.data().end()); for(;cur!=end;++cur){ if(prefix.size()!=0) { if(cur->first.find(prefix)==0) { ::std::string suffix(cur->first); suffix.erase(0,prefix.size()); TEST_ASSERT(data.get(cur->first)==filter.get(suffix)); result+= filter.get(suffix) + "\n"; } } else { ::std::string suffix(cur->first); TEST_ASSERT(data.get(cur->first)==filter.get(suffix)); result+= filter.get(suffix) + "\n"; } } // if Dummy_Test_Data changed somehow TEST_ASSERT(test_data.compare("Filter: '"+prefix+"'",result)); } void filtering(Test_Data & test_data) { filtering1(::std::string(),test_data); filtering1("1",test_data); filtering1("10",test_data); filtering1("X",test_data); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&attaching,LEVEL_PROD); TEST_NORMAL_CASE(&zero_filtering,LEVEL_PROD); TEST_NORMAL_CASE(&filtering,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/interactive_test_data_adaptor.cpp0000644000076500000240000000677111172433105026307 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/interactive_test_data_adaptor.cpp * * @brief [LEVEL: beta] implementation of @ref * diagnostics::unittest::Interactive_Test_Data_Adaptor class * * $Id: interactive_test_data_adaptor.cpp,v 1.4 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Interactive_Test_Data_Adaptor::~Interactive_Test_Data_Adaptor() { } Interactive_Test_Data_Adaptor::Interactive_Test_Data_Adaptor() : m_test_data_source(NULL) { } Test_Data_Source* Interactive_Test_Data_Adaptor::backend() const { return m_test_data_source; } void Interactive_Test_Data_Adaptor::attach(Test_Data_Source * const test_data_source) { if(test_data_source==NULL) throw Test_System_Exception("test_data_source==NULL"); m_test_data_source=test_data_source; } ::std::string const & Interactive_Test_Data_Adaptor::get(::std::string const & id) const { if(m_test_data_source==NULL) throw Test_System_Exception("test_data_source==NULL"); if(m_test_data_source->exists_entry(id)) return m_test_data_source->get_entry(id); ::std::string initial; if(p_missing_test_data(id,initial)){ m_test_data_source->set_entry(id,initial); return m_test_data_source->get_entry(id); } throw Test_Exception("Entry with ID: "+id+" does not exist"); } bool Interactive_Test_Data_Adaptor::compare(::std::string const & id,::std::string const & data) const { if(m_test_data_source==NULL) throw Test_System_Exception("test_data_source==NULL"); ::std::string new_data(data); if(!m_test_data_source->exists_entry(id)) { if(p_missing_test_data(id,new_data)){ m_test_data_source->set_entry(id,new_data); return true; } throw Test_Exception("Entry with ID: "+id+" does not exist"); } else { ::std::string const & original(get(id)); if(original==data) return true; else { if(p_mismatching_test_data(id,original,new_data)){ m_test_data_source->set_entry(id,new_data); return true; } return false; } } } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/interactive_test_data_adaptor.hpp0000644000076500000240000001460011172433105026302 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/interactive_test_data_adaptor.hpp * * @brief [LEVEL: beta] @ref * diagnostics::unittest::Interactive_Test_Data_Adaptor class * * $Id: interactive_test_data_adaptor.hpp,v 1.7 2005/06/23 09:54:25 esdentem Exp $ * * @test none * * @todo add test * * @author Christian Schallhart */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__INTERACTIVE_TEST_DATA_ADAPTOR_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__INTERACTIVE_TEST_DATA_ADAPTOR_HPP__INCLUDE_GUARD // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Interactive_Test_Data_Adaptor diagnostics/unittest/test_system/interactive_test_data_adaptor.hpp * * @brief The Interactive_Test_Data_Adaptor adapts a @ref * Test_Data_Source to a @ref Test_Data such that in case of a mssing * entry or a missmatching entry in the @ref Test_Data_Source a * corresponding hook-method is called. * * @nosubgrouping */ class Interactive_Test_Data_Adaptor : public Test_Data_Adaptor { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Interactive_Test_Data_Adaptor Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: Interactive_Test_Data_Adaptor(Self const & other); Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief the only way of construction. backend()==NULL * * @throw never */ Interactive_Test_Data_Adaptor(); /** * @brief noop * * @throw never */ virtual ~Interactive_Test_Data_Adaptor(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Implementation of the @ref Test_Data_Adaptor Interface * (including the @ref Test_Data interface) * * @{ */ public: virtual void attach(Test_Data_Source * const test_data_source); virtual Test_Data_Source* backend() const; /** * @brief If backend().exists_entry(@a id)==false, p_missing_test_data(@a * id,data) with data="" is called. If it returns true, then a new * entry id,data (data possibly modified) is created. * * @pre backend()!=NULL * * @throw Test_System_Exception if backend()==NULL * @throw Test_Exception if the entry is missing and p_missing_test_data returns false */ virtual ::std::string const & get(::std::string const & id) const; /** * @brief checks backend().get_entry(@a id)== @a data -- if true, * true is returned. If false or the entry does not exist, * either p_missing_test_data or p_mismatching_test_data is called. * * If backend().exists_entry(@a id) and backend().get_entry(@a * id)==@a data, then true is returned. * * If backend().exists_entry(@a id)==false, then * p_missing_test_data(@a id, @a data) is called. If it returns * true, then an entry @a id, @a data (@a data possibly modified) is created. * Otherwise, Test_Exception is thrown. * * If backend().exists_entry(@a id)==true but * backend().get_entry(@a id)!= @a data, p_missing_test_data(@a * id, backend().get_entry(@a id), @ data) is invoked. If it * returns true, then the entry is changed to @a id, @a data (@a * data possibly modified). Otherwise, Test_Exception is thrown. * * @pre backend()!=NULL * * @throw Test_System_Exception if backend()==NULL * @throw Test_Exception if there is missing/mismatching and * uncorrected request (see above) */ virtual bool compare(::std::string const & id,::std::string const & data) const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Interaction Interface * @{ */ protected: /** * @brief If an entry in the testdata database is missing, this * method is called. @a id is the id of the missing data while @a * data is the proposed value. * * @return true if the @a id is a accepted with a possible * modified value @a data * * @throw never */ virtual bool p_missing_test_data(::std::string const & id, ::std::string & data) const =0; /** * @brief If an entry in the testdata database is not matched, * this method is called. @a id is the id of the mismatched data * while @a data is the old stored value. In @a new_data the newly * occurring data is stored. * * @return true if the @a id is a accepted with a possible * modified value @a new_data * * @throw never */ virtual bool p_mismatching_test_data(::std::string const & id, ::std::string const & data, ::std::string & new_data) const =0; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: Test_Data_Source * m_test_data_source; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/list_test_suite_traversal.cpp0000644000076500000240000000543611172433105025533 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/list_test_suite_traversal.cpp * * @brief [LEVEL: beta] Implementation of @ref diagnostics::unittest::List_Test_Suite_Traversal class * * $Id: list_test_suite_traversal.cpp,v 1.7 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; List_Test_Suite_Traversal::~List_Test_Suite_Traversal() { } List_Test_Suite_Traversal::List_Test_Suite_Traversal(Test_List_Results_t & results) : m_results(results) { } void List_Test_Suite_Traversal::visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level) { ::std::string test_case_path; Path_t::const_iterator current(path.begin()); Path_t::const_iterator const end(path.end()); // take care of empty name in the root suite. if(current->size()!=0) test_case_path+=DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR; for(;current!=end;++current) test_case_path+= (*current) + DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR; test_case_path+=test_case.name(); m_results.push_back(new Test_List_Result(test_case_path, test_case.timeout(), test_case.is_rerunable(), test_case.is_testable_at(LEVEL_PROD), test_case.is_testable_at(LEVEL_DEBUG), test_case.is_testable_at(LEVEL_AUDIT))); } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/list_test_suite_traversal.hpp0000644000076500000240000001037411172433105025535 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/list_test_suite_traversal.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::List_Test_Suite_Traversal class * * $Id: list_test_suite_traversal.hpp,v 1.12 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/list_test_suite_traversal.t.cpp * */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__LIST_TEST_SUITE_TRAVERSAL_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__LIST_TEST_SUITE_TRAVERSAL_HPP__INCLUDE_GUARD // used as base class #include // used in the interface by reference #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference // class Test_List_Result; /** * @class List_Test_Suite_Traversal diagnostics/unittest/test_system/list_test_suite_traversal.hpp * * @brief Provides a Traversal through a @ref Test_Suite which adds * @ref Test_List_Result to a vector which describe the visited * Test_Cases which match the mask and build-level. The path in each * Test_List_Result will can be used to match the corresponding @ref * Test_Case. * * In particular, if the traversed Test_Suite comes with an * empty-named root-Test_Suite, it is not reflected in the paths (it * is also ignored in the matching algorithm of @ref * Test_Suite_Traversal). * * @nosubgrouping */ class List_Test_Suite_Traversal : public Test_Suite_Traversal { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef List_Test_Suite_Traversal Self; public: typedef ::std::vector Test_List_Results_t; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief do nothing * * @throw never */ virtual ~List_Test_Suite_Traversal(); /** * @brief takes @a results -- this vector will be expanded each * time a call to traverse finds a matching @ref Test_Case. * * @throw never */ explicit List_Test_Suite_Traversal(Test_List_Results_t & results); private: /** * @brief not available */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Hooks * @{ */ protected: /** * @brief add to @ref m_results a new @ref Test_List_Result * corresponding to the visited @ref Test_Case * * @throw never */ virtual void visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: Test_List_Results_t & m_results; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/list_test_suite_traversal.t.cpp0000644000076500000240000001205611172433105025771 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/list_test_suite_traversal.t.cpp * * @brief [LEVEL: alpha] testing @ref diagnostics::unittest::List_Test_Suite_Traversal * * $Id: list_test_suite_traversal.t.cpp,v 1.13 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include #include // used components #include // test support #include #include #include #include #define TEST_COMPONENT_NAME List_Test_Suite_Traversal #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; void dump_simple_test_suite(Test_Data & test_data) { Test_Suite *s1(simple_test_suite()); TEST_ASSERT(test_data.compare("A",dump_test_suite(s1,"/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-S2-A",dump_test_suite(s1,"/*/S2/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-S3-A",dump_test_suite(s1,"/*/S3/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A-C1",dump_test_suite(s1,"/*/*/C1",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A-C2",dump_test_suite(s1,"/*/*/C2",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A-A",dump_test_suite(s1,"/*/*/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-C1",dump_test_suite(s1,"/*/C1",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A",dump_test_suite(s1,"/*/*",LEVEL_TEST))); delete s1; } void dump_simple_unnamed_test_suite(Test_Data & test_data) { Test_Suite *s1(simple_unnamed_test_suite()); TEST_ASSERT(test_data.compare("A",dump_test_suite(s1,"/*",LEVEL_TEST))); delete s1; } void dump_test_suite_all_test_case_variations(Test_Data & test_data) { Test_Suite *s1(test_suite_all_test_case_variations()); TEST_ASSERT(test_data.compare("A",dump_test_suite(s1,"/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-S2-A",dump_test_suite(s1,"/*/S2/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-S3-A",dump_test_suite(s1,"/*/S3/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A-name2",dump_test_suite(s1,"/*/*/name2",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A-name3",dump_test_suite(s1,"/*/*/name3",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A-A",dump_test_suite(s1,"/*/*/*",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-name2",dump_test_suite(s1,"/*/name2",LEVEL_TEST))); TEST_ASSERT(test_data.compare("A-A",dump_test_suite(s1,"/*/*",LEVEL_TEST))); delete s1; } void dump_and_traverse_simple_test_suite_twice(Test_Data & test_data) { Test_Suite *s1(simple_test_suite()); typedef ::diagnostics::unittest::List_Test_Suite_Traversal::Test_List_Results_t Results_t; Results_t results; ::diagnostics::unittest::List_Test_Suite_Traversal trav(results); trav.traverse(*s1,"/*",LEVEL_TEST); trav.traverse(*s1,"/*",LEVEL_TEST); Results_t::const_iterator cur(results.begin()); Results_t::const_iterator const end(results.end()); ::std::ostringstream stream; for(;cur!=end;++cur) { stream << **cur << '\n'; delete *cur; } TEST_ASSERT(test_data.compare("twice",stream.str())); delete s1; } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&dump_simple_test_suite,LEVEL_PROD); TEST_NORMAL_CASE(&dump_simple_unnamed_test_suite,LEVEL_PROD); TEST_NORMAL_CASE(&dump_test_suite_all_test_case_variations,LEVEL_PROD); TEST_NORMAL_CASE(&dump_and_traverse_simple_test_suite_twice,LEVEL_PROD); //TEST_ABNORMAL_CASE(Incorrect_Trace_Processing(),LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/Makefile.am0000644000076500000240000001170211335527772021565 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libtest_system.la libtest_system_la_SOURCES = current_test_logger.cpp file_test_data_source.cpp filter_test_data.cpp interactive_test_data_adaptor.cpp list_test_suite_traversal.cpp mutexed_test_data.cpp run_test_suite_traversal.cpp stream_test_data_adaptor.cpp stream_test_system.cpp test_data_adaptor.cpp test_data_source.cpp test_list_result.cpp test_logger.cpp test_run_result.cpp test_suite_traversal.cpp test_system.cpp pkginclude_HEADERS = current_test_logger.hpp file_test_data_source.hpp filter_test_data.hpp interactive_test_data_adaptor.hpp list_test_suite_traversal.hpp mutexed_test_data.hpp run_test_suite_traversal.hpp stream_test_data_adaptor.hpp stream_test_system.hpp test_data_adaptor.hpp test_data_adaptor.ts.hpp test_data_source.hpp test_data_source.ts.hpp test_list_result.hpp test_logger.hpp test_run_result.hpp test_suite_traversal.hpp test_system.hpp check_PROGRAMS = file_test_data_source filter_test_data list_test_suite_traversal stream_test_data_adaptor stream_test_system test_list_result test_logger test_run_result test_suite_traversal file_test_data_source_SOURCES = file_test_data_source.t.cpp # add additional objects required to build file_test_data_source here, like # file_test_data_source_LDADD = ../base/libbase.la libbla.la file_test_data_source_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la filter_test_data_SOURCES = filter_test_data.t.cpp # add additional objects required to build filter_test_data here, like # filter_test_data_LDADD = ../base/libbase.la libbla.la filter_test_data_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la list_test_suite_traversal_SOURCES = list_test_suite_traversal.t.cpp # add additional objects required to build list_test_suite_traversal here, like # list_test_suite_traversal_LDADD = ../base/libbase.la libbla.la list_test_suite_traversal_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la stream_test_data_adaptor_SOURCES = stream_test_data_adaptor.t.cpp # add additional objects required to build stream_test_data_adaptor here, like # stream_test_data_adaptor_LDADD = ../base/libbase.la libbla.la stream_test_data_adaptor_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la stream_test_system_SOURCES = stream_test_system.t.cpp # add additional objects required to build stream_test_system here, like # stream_test_system_LDADD = ../base/libbase.la libbla.la stream_test_system_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_list_result_SOURCES = test_list_result.t.cpp # add additional objects required to build test_list_result here, like # test_list_result_LDADD = ../base/libbase.la libbla.la test_list_result_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_logger_SOURCES = test_logger.t.cpp # add additional objects required to build test_logger here, like # test_logger_LDADD = ../base/libbase.la libbla.la test_logger_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_run_result_SOURCES = test_run_result.t.cpp # add additional objects required to build test_run_result here, like # test_run_result_LDADD = ../base/libbase.la libbla.la test_run_result_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_suite_traversal_SOURCES = test_suite_traversal.t.cpp # add additional objects required to build test_suite_traversal here, like # test_suite_traversal_LDADD = ../base/libbase.la libbla.la test_suite_traversal_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la include_diagnostics_unittest_test_systemdir = $(includedir)/diagnostics/unittest/test_system include_diagnostics_unittest_test_system_HEADERS = current_test_logger.hpp file_test_data_source.hpp filter_test_data.hpp interactive_test_data_adaptor.hpp list_test_suite_traversal.hpp mutexed_test_data.hpp run_test_suite_traversal.hpp stream_test_data_adaptor.hpp stream_test_system.hpp test_data_adaptor.hpp test_data_source.hpp test_list_result.hpp test_logger.hpp test_run_result.hpp test_suite_traversal.hpp test_system.hpp noinst_LTLIBRARIES += libtest_system_ts.la libtest_system_ts_la_SOURCES = test_data_adaptor.ts.cpp test_data_source.ts.cpp TESTS = file_test_data_source filter_test_data list_test_suite_traversal stream_test_data_adaptor stream_test_system test_list_result test_logger test_run_result test_suite_traversal diagnostics-0.3.3/diagnostics/unittest/test_system/Makefile.in0000644000076500000240000012522411567506172021601 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_unittest_test_system_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am check_PROGRAMS = file_test_data_source$(EXEEXT) \ filter_test_data$(EXEEXT) list_test_suite_traversal$(EXEEXT) \ stream_test_data_adaptor$(EXEEXT) stream_test_system$(EXEEXT) \ test_list_result$(EXEEXT) test_logger$(EXEEXT) \ test_run_result$(EXEEXT) test_suite_traversal$(EXEEXT) TESTS = file_test_data_source$(EXEEXT) filter_test_data$(EXEEXT) \ list_test_suite_traversal$(EXEEXT) \ stream_test_data_adaptor$(EXEEXT) stream_test_system$(EXEEXT) \ test_list_result$(EXEEXT) test_logger$(EXEEXT) \ test_run_result$(EXEEXT) test_suite_traversal$(EXEEXT) subdir = diagnostics/unittest/test_system ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libtest_system_la_LIBADD = am_libtest_system_la_OBJECTS = current_test_logger.lo \ file_test_data_source.lo filter_test_data.lo \ interactive_test_data_adaptor.lo list_test_suite_traversal.lo \ mutexed_test_data.lo run_test_suite_traversal.lo \ stream_test_data_adaptor.lo stream_test_system.lo \ test_data_adaptor.lo test_data_source.lo test_list_result.lo \ test_logger.lo test_run_result.lo test_suite_traversal.lo \ test_system.lo libtest_system_la_OBJECTS = $(am_libtest_system_la_OBJECTS) libtest_system_ts_la_LIBADD = am_libtest_system_ts_la_OBJECTS = test_data_adaptor.ts.lo \ test_data_source.ts.lo libtest_system_ts_la_OBJECTS = $(am_libtest_system_ts_la_OBJECTS) am_file_test_data_source_OBJECTS = file_test_data_source.t.$(OBJEXT) file_test_data_source_OBJECTS = $(am_file_test_data_source_OBJECTS) file_test_data_source_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_filter_test_data_OBJECTS = filter_test_data.t.$(OBJEXT) filter_test_data_OBJECTS = $(am_filter_test_data_OBJECTS) filter_test_data_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_list_test_suite_traversal_OBJECTS = \ list_test_suite_traversal.t.$(OBJEXT) list_test_suite_traversal_OBJECTS = \ $(am_list_test_suite_traversal_OBJECTS) list_test_suite_traversal_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_stream_test_data_adaptor_OBJECTS = \ stream_test_data_adaptor.t.$(OBJEXT) stream_test_data_adaptor_OBJECTS = \ $(am_stream_test_data_adaptor_OBJECTS) stream_test_data_adaptor_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_stream_test_system_OBJECTS = stream_test_system.t.$(OBJEXT) stream_test_system_OBJECTS = $(am_stream_test_system_OBJECTS) stream_test_system_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_test_list_result_OBJECTS = test_list_result.t.$(OBJEXT) test_list_result_OBJECTS = $(am_test_list_result_OBJECTS) test_list_result_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_test_logger_OBJECTS = test_logger.t.$(OBJEXT) test_logger_OBJECTS = $(am_test_logger_OBJECTS) test_logger_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_test_run_result_OBJECTS = test_run_result.t.$(OBJEXT) test_run_result_OBJECTS = $(am_test_run_result_OBJECTS) test_run_result_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la am_test_suite_traversal_OBJECTS = test_suite_traversal.t.$(OBJEXT) test_suite_traversal_OBJECTS = $(am_test_suite_traversal_OBJECTS) test_suite_traversal_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ libtest_system_ts.la ../../util/libutil_ts.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libtest_system_la_SOURCES) $(libtest_system_ts_la_SOURCES) \ $(file_test_data_source_SOURCES) $(filter_test_data_SOURCES) \ $(list_test_suite_traversal_SOURCES) \ $(stream_test_data_adaptor_SOURCES) \ $(stream_test_system_SOURCES) $(test_list_result_SOURCES) \ $(test_logger_SOURCES) $(test_run_result_SOURCES) \ $(test_suite_traversal_SOURCES) DIST_SOURCES = $(libtest_system_la_SOURCES) \ $(libtest_system_ts_la_SOURCES) \ $(file_test_data_source_SOURCES) $(filter_test_data_SOURCES) \ $(list_test_suite_traversal_SOURCES) \ $(stream_test_data_adaptor_SOURCES) \ $(stream_test_system_SOURCES) $(test_list_result_SOURCES) \ $(test_logger_SOURCES) $(test_run_result_SOURCES) \ $(test_suite_traversal_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = \ "$(DESTDIR)$(include_diagnostics_unittest_test_systemdir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_unittest_test_system_HEADERS) \ $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libtest_system.la libtest_system_ts.la libtest_system_la_SOURCES = current_test_logger.cpp file_test_data_source.cpp filter_test_data.cpp interactive_test_data_adaptor.cpp list_test_suite_traversal.cpp mutexed_test_data.cpp run_test_suite_traversal.cpp stream_test_data_adaptor.cpp stream_test_system.cpp test_data_adaptor.cpp test_data_source.cpp test_list_result.cpp test_logger.cpp test_run_result.cpp test_suite_traversal.cpp test_system.cpp pkginclude_HEADERS = current_test_logger.hpp file_test_data_source.hpp filter_test_data.hpp interactive_test_data_adaptor.hpp list_test_suite_traversal.hpp mutexed_test_data.hpp run_test_suite_traversal.hpp stream_test_data_adaptor.hpp stream_test_system.hpp test_data_adaptor.hpp test_data_adaptor.ts.hpp test_data_source.hpp test_data_source.ts.hpp test_list_result.hpp test_logger.hpp test_run_result.hpp test_suite_traversal.hpp test_system.hpp file_test_data_source_SOURCES = file_test_data_source.t.cpp # add additional objects required to build file_test_data_source here, like # file_test_data_source_LDADD = ../base/libbase.la libbla.la file_test_data_source_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la filter_test_data_SOURCES = filter_test_data.t.cpp # add additional objects required to build filter_test_data here, like # filter_test_data_LDADD = ../base/libbase.la libbla.la filter_test_data_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la list_test_suite_traversal_SOURCES = list_test_suite_traversal.t.cpp # add additional objects required to build list_test_suite_traversal here, like # list_test_suite_traversal_LDADD = ../base/libbase.la libbla.la list_test_suite_traversal_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la stream_test_data_adaptor_SOURCES = stream_test_data_adaptor.t.cpp # add additional objects required to build stream_test_data_adaptor here, like # stream_test_data_adaptor_LDADD = ../base/libbase.la libbla.la stream_test_data_adaptor_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la stream_test_system_SOURCES = stream_test_system.t.cpp # add additional objects required to build stream_test_system here, like # stream_test_system_LDADD = ../base/libbase.la libbla.la stream_test_system_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_list_result_SOURCES = test_list_result.t.cpp # add additional objects required to build test_list_result here, like # test_list_result_LDADD = ../base/libbase.la libbla.la test_list_result_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_logger_SOURCES = test_logger.t.cpp # add additional objects required to build test_logger here, like # test_logger_LDADD = ../base/libbase.la libbla.la test_logger_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_run_result_SOURCES = test_run_result.t.cpp # add additional objects required to build test_run_result here, like # test_run_result_LDADD = ../base/libbase.la libbla.la test_run_result_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la test_suite_traversal_SOURCES = test_suite_traversal.t.cpp # add additional objects required to build test_suite_traversal here, like # test_suite_traversal_LDADD = ../base/libbase.la libbla.la test_suite_traversal_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la libtest_system_ts.la ../../util/libutil_ts.la include_diagnostics_unittest_test_systemdir = $(includedir)/diagnostics/unittest/test_system include_diagnostics_unittest_test_system_HEADERS = current_test_logger.hpp file_test_data_source.hpp filter_test_data.hpp interactive_test_data_adaptor.hpp list_test_suite_traversal.hpp mutexed_test_data.hpp run_test_suite_traversal.hpp stream_test_data_adaptor.hpp stream_test_system.hpp test_data_adaptor.hpp test_data_source.hpp test_list_result.hpp test_logger.hpp test_run_result.hpp test_suite_traversal.hpp test_system.hpp libtest_system_ts_la_SOURCES = test_data_adaptor.ts.cpp test_data_source.ts.cpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/unittest/test_system/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/unittest/test_system/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libtest_system.la: $(libtest_system_la_OBJECTS) $(libtest_system_la_DEPENDENCIES) $(CXXLINK) $(libtest_system_la_OBJECTS) $(libtest_system_la_LIBADD) $(LIBS) libtest_system_ts.la: $(libtest_system_ts_la_OBJECTS) $(libtest_system_ts_la_DEPENDENCIES) $(CXXLINK) $(libtest_system_ts_la_OBJECTS) $(libtest_system_ts_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list file_test_data_source$(EXEEXT): $(file_test_data_source_OBJECTS) $(file_test_data_source_DEPENDENCIES) @rm -f file_test_data_source$(EXEEXT) $(CXXLINK) $(file_test_data_source_OBJECTS) $(file_test_data_source_LDADD) $(LIBS) filter_test_data$(EXEEXT): $(filter_test_data_OBJECTS) $(filter_test_data_DEPENDENCIES) @rm -f filter_test_data$(EXEEXT) $(CXXLINK) $(filter_test_data_OBJECTS) $(filter_test_data_LDADD) $(LIBS) list_test_suite_traversal$(EXEEXT): $(list_test_suite_traversal_OBJECTS) $(list_test_suite_traversal_DEPENDENCIES) @rm -f list_test_suite_traversal$(EXEEXT) $(CXXLINK) $(list_test_suite_traversal_OBJECTS) $(list_test_suite_traversal_LDADD) $(LIBS) stream_test_data_adaptor$(EXEEXT): $(stream_test_data_adaptor_OBJECTS) $(stream_test_data_adaptor_DEPENDENCIES) @rm -f stream_test_data_adaptor$(EXEEXT) $(CXXLINK) $(stream_test_data_adaptor_OBJECTS) $(stream_test_data_adaptor_LDADD) $(LIBS) stream_test_system$(EXEEXT): $(stream_test_system_OBJECTS) $(stream_test_system_DEPENDENCIES) @rm -f stream_test_system$(EXEEXT) $(CXXLINK) $(stream_test_system_OBJECTS) $(stream_test_system_LDADD) $(LIBS) test_list_result$(EXEEXT): $(test_list_result_OBJECTS) $(test_list_result_DEPENDENCIES) @rm -f test_list_result$(EXEEXT) $(CXXLINK) $(test_list_result_OBJECTS) $(test_list_result_LDADD) $(LIBS) test_logger$(EXEEXT): $(test_logger_OBJECTS) $(test_logger_DEPENDENCIES) @rm -f test_logger$(EXEEXT) $(CXXLINK) $(test_logger_OBJECTS) $(test_logger_LDADD) $(LIBS) test_run_result$(EXEEXT): $(test_run_result_OBJECTS) $(test_run_result_DEPENDENCIES) @rm -f test_run_result$(EXEEXT) $(CXXLINK) $(test_run_result_OBJECTS) $(test_run_result_LDADD) $(LIBS) test_suite_traversal$(EXEEXT): $(test_suite_traversal_OBJECTS) $(test_suite_traversal_DEPENDENCIES) @rm -f test_suite_traversal$(EXEEXT) $(CXXLINK) $(test_suite_traversal_OBJECTS) $(test_suite_traversal_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/current_test_logger.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_test_data_source.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_test_data_source.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filter_test_data.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filter_test_data.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/interactive_test_data_adaptor.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list_test_suite_traversal.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list_test_suite_traversal.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mutexed_test_data.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/run_test_suite_traversal.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test_data_adaptor.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test_data_adaptor.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test_system.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test_system.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_data_adaptor.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_data_adaptor.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_data_source.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_data_source.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_list_result.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_list_result.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_logger.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_logger.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_run_result.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_run_result.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_suite_traversal.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_suite_traversal.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_system.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_unittest_test_systemHEADERS: $(include_diagnostics_unittest_test_system_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_unittest_test_systemdir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_unittest_test_systemdir)" @list='$(include_diagnostics_unittest_test_system_HEADERS)'; test -n "$(include_diagnostics_unittest_test_systemdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_unittest_test_systemdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_unittest_test_systemdir)" || exit $$?; \ done uninstall-include_diagnostics_unittest_test_systemHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_unittest_test_system_HEADERS)'; test -n "$(include_diagnostics_unittest_test_systemdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_unittest_test_systemdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_unittest_test_systemdir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_unittest_test_systemdir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: \ install-include_diagnostics_unittest_test_systemHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: \ uninstall-include_diagnostics_unittest_test_systemHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am \ install-include_diagnostics_unittest_test_systemHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgincludeHEADERS install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_unittest_test_systemHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/unittest/test_system/mutexed_test_data.cpp0000644000076500000240000000472111172433105023724 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/mutexed_test_data.cpp * * @brief [LEVEL: beta] implementation of @ref * diagnostics::unittest::Mutexed_Test_Data class * * $Id: mutexed_test_data.cpp,v 1.6 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Mutexed_Test_Data::~Mutexed_Test_Data() { } Mutexed_Test_Data::Mutexed_Test_Data() : m_backend(NULL) { } void Mutexed_Test_Data::attach(Test_Data * const backend) { if(backend==NULL) throw Test_System_Exception("backend==NULL"); m_backend=backend; } ::std::string const & Mutexed_Test_Data::get(::std::string const & id) const { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); if(m_backend==NULL) throw Test_System_Exception("backend==NULL"); return m_backend->get(id); } bool Mutexed_Test_Data::compare(::std::string const & id,::std::string const & data) const { DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD(lock_guard); if(m_backend==NULL) throw Test_System_Exception("backend==NULL"); return m_backend->compare(id,data); } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/mutexed_test_data.hpp0000644000076500000240000001101611172433105023724 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/mutexed_test_data.hpp * * @brief [LEVEL: alpha] @ref diagnostics::unittest::Mutexed_Test_Data class * * $Id: mutexed_test_data.hpp,v 1.6 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @test none * * @todo add test */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__MUTEXED_TEST_DATA_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__MUTEXED_TEST_DATA_HPP__INCLUDE_GUARD // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Mutexed_Test_Data diagnostics/unittest/test_system/mutexed_test_data.hpp * * @brief A @ref diagnostics::unittest::Test_Data implementation which * uses another @ref diagnostics::unittest::Test_Data implementation * as backend. The calls to @ref diagnostics::unittest::Test_Data::get * and @ref diagnostics::unittest::Test_Data::compare are delegated to * the backend, but these calls are all mutexed using @ref * diagnostics::internal::Lock_Guard. * * @nosubgrouping */ class Mutexed_Test_Data : public Test_Data { //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief the only way -- backend()==NULL, prefix()=="" * * @throw never */ Mutexed_Test_Data(); /** * @throw never */ virtual ~Mutexed_Test_Data(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Configuration * @{ */ public: /** * @brief attaches @a backend to this -- NO ownership transfer. * * Once a backend is attached to this, the @ref get and @ref * compare methods can be used. * * @pre @a backend!=NULL * @post POST.backend() == @a backend * * @throw Test_System_Exception if the precondition is not met */ void attach(Test_Data * const backend); /** * @brief returns the currently attached backend. * * @throw never */ inline Test_Data * backend() const { return m_backend; } // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Implementation of the @ref Test_Data interface * @{ */ public: /** * @brief equivalent to backend().get(id) -- but the call is * guarded by @ref DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD. * * @throw Test_System_Exception if the underlying backend throws it or * if @ref backend()==NULL * @throw Test_Exception if the underlying backend throws it */ virtual ::std::string const & get(::std::string const & id) const; /** * @brief equivalent to backend().compare(id,data) -- but the call * is guarded by @ref DIAGNOSTICS_LOGGING_FACILITY_LOCK_GUARD. * * @throw Test_System_Exception if the underlying backend throws it or * if @ref backend()==NULL * @throw Test_Exception if the underlying backend throws it */ virtual bool compare(::std::string const & id,::std::string const & data) const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: Test_Data * m_backend; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/run_test_suite_traversal.cpp0000644000076500000240000001512111172433105025354 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/run_test_suite_traversal.cpp * * @brief [LEVEL: beta] Implementation @ref * diagnostics::unittest::Run_Test_Suite_Traversal class * * $Id: run_test_suite_traversal.cpp,v 1.22 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @todo test and document */ #include #include #include #include #include #include #include #include #include #include #include #include /** * @brief basis for all logging -- adds the empty string for basefile * and file and 0 for line and sends calls @ref * diagnostics::Logging_Facility::log. * * @param LEVEL must be of type @ref diagnostics::Level_t * @param TYPE must of type @ref diagnostics::Type_t * @param NR_WHAT must be convertible to int (numerical field which is uninterpreted by the frame) * @param STR_WHAT must be convertible to ::std::string (string field which is uninterpreted by the frame) */ #define DIAGNOSTICS_ANONYMOUS_LOG(LEVEL,TYPE,NR_WHAT,STR_WHAT) \ ::DIAGNOSTICS_NAMESPACE::Logging_Facility::log( \ (LEVEL), \ (TYPE), \ (NR_WHAT), \ (STR_WHAT), \ "", \ "", \ 0) DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Run_Test_Suite_Traversal::~Run_Test_Suite_Traversal() { } Run_Test_Suite_Traversal::Run_Test_Suite_Traversal(Level_t const build_level, Test_Data & test_data, Test_Run_Results_t & results) : m_build_level(build_level), m_test_data(test_data), m_results(results) { } /* void Run_Test_Suite_Traversal::enter_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level) { // creating the logger, storing it and placing it in the Current_Test_Logger. internal::Current_Test_Logger::set_logger(m_logger=new Test_Logger(m_build_level,m_build_level,m_results)); // registering the logger Logging_Config::register_logger(m_logger); } void Run_Test_Suite_Traversal::exit_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level, bool const exception_going_through) { // unregister the logger -- testing is done Logging_Config::unregister_logger(m_logger); // also remove it from the Current_Test_Logger -- to prevent incorrect usage. internal::Current_Test_Logger::set_logger(NULL); delete m_logger; } */ void Run_Test_Suite_Traversal::visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level) { ::std::string test_case_path; Path_t::const_iterator current(path.begin()); Path_t::const_iterator const end(path.end()); for(;current!=end;++current) test_case_path+= (*current) + DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR; test_case_path+=test_case.name(); ::std::string const test_data_filter(test_case_path+DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR); Filter_Test_Data filter_test_data; filter_test_data.attach(test_data_filter,&m_test_data); Mutexed_Test_Data test_data; test_data.attach(&filter_test_data); // determining the target_level, i.e., the lowest testable level. Level_t target_level(LEVEL_AUDIT); if(test_case.is_testable_at(LEVEL_DEBUG)) target_level=LEVEL_DEBUG; if(test_case.is_testable_at(LEVEL_PROD)) target_level=LEVEL_PROD; // creating the logger, storing it and placing it in the // Current_Test_Logger and registering it Test_Logger logger(m_build_level,target_level,m_results); internal::Current_Test_Logger::push_logger(&logger); DIAGNOSTICS_ANONYMOUS_LOG(LEVEL_TEST,TYPE_TESTCASE_ENTER,0,"CASE=\""+test_case_path+"\""); try { test_case.run(test_data); } catch(Test_System_Exception & e){ DIAGNOSTICS_ANONYMOUS_LOG(LEVEL_TEST,TYPE_TESTCASE_EXIT,0,"CASE=\""+test_case_path+"\""); internal::Current_Test_Logger::pop_logger(); throw; // ok, that's our problem -- handled at a higher level } catch(Exception & e) { // It is an error to end a test case with an exception. // We know the type, we report. DIAGNOSTICS_ANONYMOUS_LOG(LEVEL_TEST,TYPE_UNEXPECTED_EXCEPTION,0, "at the end of CASE=\"" + test_case_path + " EXCEPTION=\"" + e.name() + "\" WHAT=\"" + e.what() + "\""); } catch(::std::exception & e) { // It is an error to end a test case with an exception. // We know the type, we report. DIAGNOSTICS_ANONYMOUS_LOG(LEVEL_TEST,TYPE_UNEXPECTED_EXCEPTION,0, "at the end of CASE=\"" + test_case_path + " ::std::exception" + " WHAT=\"" + e.what() + "\""); } catch(...){ // It is an error to end a test case with an exception. // However, it some custom exception, we do not know about. DIAGNOSTICS_ANONYMOUS_LOG(LEVEL_TEST,TYPE_UNEXPECTED_EXCEPTION,0, "at the end of CASE=\"" + test_case_path+"\""); } DIAGNOSTICS_ANONYMOUS_LOG(LEVEL_TEST,TYPE_TESTCASE_EXIT,0,"CASE=\""+test_case_path+"\""); internal::Current_Test_Logger::pop_logger(); } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/run_test_suite_traversal.hpp0000644000076500000240000001001011172433105025351 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/run_test_suite_traversal.hpp * * @brief [LEVEL: beta] @ref * diagnostics::unittest::Run_Test_Suite_Traversal class * * $Id: run_test_suite_traversal.hpp,v 1.11 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @todo none * * @todo test */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__RUN_TEST_SUITE_TRAVERSAL_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__RUN_TEST_SUITE_TRAVERSAL_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference class Test_Data; // diagnostics/unittest/test_system/test_run_result.hpp // used in the interface by reference class Test_Run_Result; // used in the interface by reference // diagnostics/unittest/test_system/test_logger.hpp class Test_Logger; /** * @class Run_Test_Suite_Traversal * * @brief The Run_Test_Suite_Traversal executes each @ref Test_Case * which is mateched by traverse method of @ref * Test_Suite_Traversal. The @ref Test_Data, the build level and the * @ref Test_Run_Result of the exeucting traversal are given to the * traversal at construction time. * * @attention While the interface of the Run_Test_Suite_Traversal is * quite simple, it has to set up the test harness which is quite * complicated. To do so, it has to be a long distance friend of @ref * diagnostics::unittest::internal::Current_Test_Logger. * * @nosubgrouping */ class Run_Test_Suite_Traversal : public Test_Suite_Traversal { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Test_Suite_Traversal Super; typedef Run_Test_Suite_Traversal Self; public: typedef ::std::vector Test_Run_Results_t; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creagtion * @{ */ public: virtual ~Run_Test_Suite_Traversal(); Run_Test_Suite_Traversal(Level_t const build_level, Test_Data & test_data, Test_Run_Results_t & results); private: /** * @brief not available */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Hook Interface of Test_Suite_Traversal * @{ */ protected: virtual void visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level); //@} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: Level_t const m_build_level; Test_Data & m_test_data; Test_Run_Results_t & m_results; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/stream_test_data_adaptor.cpp0000644000076500000240000001655511172433105025266 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/stream_test_data_adaptor.cpp * * @brief [LEVEL: beta] implementation of @ref * diagnostics::unittest::Stream_Test_Data_Adaptor class * * $Id: stream_test_data_adaptor.cpp 861 2009-04-18 20:14:51Z tautschnig $ * * @author Christian Schallhart */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Stream_Test_Data_Adaptor::~Stream_Test_Data_Adaptor() { } Stream_Test_Data_Adaptor::Stream_Test_Data_Adaptor(::std::istream & input, ::std::ostream & output) : m_input(input), m_output(output), m_mode(MODE_INTERACTIVE) { } Stream_Test_Data_Adaptor::Mode_t Stream_Test_Data_Adaptor::mode() const { return m_mode; } void Stream_Test_Data_Adaptor::mode(Mode_t const mode) { m_mode=mode; } bool Stream_Test_Data_Adaptor::p_missing_test_data(::std::string const & id, ::std::string & data) const { if(m_mode==MODE_ACCEPT) return true; if(m_mode==MODE_REJECT) return false; m_output << "MISSING ENTRY: ID='" << id << "'\n" << "--------------------------------------------------------------------------------\n" << data << "\n" << "--------------------------------------------------------------------------------" << ::std::endl; m_output << "Possible entries:\n" << " 'a': Accept the difference and save.\n" << " 'r': Reject the difference and do not save.\n" << "Proceed? [a|r]: "; char c_prev, c = '\n'; bool first_run = true; for(;;){ c_prev = c; m_input.get(c); // Remove all the newline trash that may stick in the input stream if(first_run && c == '\n'){ m_input.get(c); first_run = false; }else if(first_run){ first_run = false; } if(m_input.eof()) break; if((c_prev=='\n') && (c=='A' || c=='a')){ if(m_input.get() == '\n'){ m_output << "Accepting. As soon as you quit data will be saved to the database." << ::std::endl; return true; } }else if((c_prev=='\n') && (c=='R' || c=='r')){ if(m_input.get() == '\n'){ m_output << "Rejecting. Data will not be saved to the database." << ::std::endl; return false; } }else if(c=='\n'){ m_output << "Possible entries:\n" << " 'a': Accept the difference and save.\n" << " 'r': Reject the difference and do not save.\n" << "Proceed? [a|r]: "; } } m_output << "This must not happen!" << ::std::endl; return false; } bool Stream_Test_Data_Adaptor::p_mismatching_test_data(::std::string const & id, ::std::string const & data, ::std::string & new_data) const { using ::diagnostics::internal::diff_text; if(m_mode==MODE_ACCEPT) return true; if(m_mode==MODE_REJECT) return false; char const * proceed_text( "Possible entries:\n" " 'a': Accept the difference and save.\n" " 'r': Reject the difference and do not save.\n" " 'o': Print the old output.\n" " 'n': Print the new output.\n" " 'd': Print the diff between the old and new output\n" "Proceed? [a|r|o|n|d]: " ); try { m_output << "MISSMATCHING ENTRY: ID='" << id << "'\n" << "Diff:\n" << "--------------------------------------------------------------------------------\n" << diff_text(data, new_data, true) << "\n" << "--------------------------------------------------------------------------------" << ::std::endl; m_output << proceed_text; } catch(::diagnostics::internal::Diff_Exception const& e) { m_output << "MISSMATCHING ENTRY: ID='" << id << "'\n" << e.what() << ::std::endl; } char c_prev, c = '\n'; bool first_run = true; for(;;){ c_prev = c; m_input.get(c); // Remove all the newline trash that may stick in the input stream if(first_run && c == '\n'){ m_input.get(c); first_run = false; }else if(first_run){ first_run = false; } if(m_input.eof()) break; if((c_prev=='\n') && (c=='A' || c=='a')){ if(m_input.get() == '\n'){ m_output << "Accepting. As soon as you quit data will be saved to the database." << ::std::endl; return true; } }else if((c_prev=='\n') && (c=='R' || c=='r')){ if(m_input.get() == '\n'){ m_output << "Rejecting. Data will not be saved to the database." << ::std::endl; return false; } }else if((c_prev=='\n') && (c=='O' || c=='o')){ c_prev = c; m_input.get(c); if(c == '\n'){ m_output << "MISSMATCHING ENTRY: ID='" << id << "'\n" << "Old output:\n" << "--------------------------------------------------------------------------------\n" << data << "\n" << "--------------------------------------------------------------------------------" << ::std::endl; m_output << proceed_text; } }else if((c_prev=='\n') && (c=='N' || c=='n')){ c_prev = c; m_input.get(c); if(c == '\n'){ m_output << "MISSMATCHING ENTRY: ID='" << id << "'\n" << "New output:\n" << "--------------------------------------------------------------------------------\n" << new_data << "\n" << "--------------------------------------------------------------------------------" << ::std::endl; m_output << proceed_text; } }else if((c_prev=='\n') && (c=='D' || c=='d')){ c_prev = c; m_input.get(c); if(c == '\n'){ try { m_output << "MISSMATCHING ENTRY: ID='" << id << "'\n" << "Diff:\n" << "--------------------------------------------------------------------------------\n" << diff_text(data, new_data, true) << "\n" << "--------------------------------------------------------------------------------" << ::std::endl; } catch(::diagnostics::internal::Diff_Exception const& e) { m_output << "MISSMATCHING ENTRY: ID='" << id << "'\n" << e.what() << ::std::endl; } m_output << proceed_text; } }else if(c=='\n'){ m_output << proceed_text; } } m_output << "This must not happen!" << ::std::endl; return false; } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/stream_test_data_adaptor.hpp0000644000076500000240000001303211172433105025256 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/stream_test_data_adaptor.hpp * * @brief [LEVEL: beta] @ref * diagnostics::unittest::Stream_Test_Data_Adaptor class * * $Id: stream_test_data_adaptor.hpp,v 1.6 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/stream_test_data_adaptor.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__STREAM_TEST_DATA_ADAPTOR_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__STREAM_TEST_DATA_ADAPTOR_HPP__INCLUDE_GUARD // used as base class #include // used by value in the interface #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Stream_Test_Data_Adaptor diagnostics/unittest/test_system/stream_test_data_adaptor.hpp * * @brief Adapts a @ref Test_Data_Source to a @ref Test_Data while * using stream-based user-interaction to optionally update the * testdata database in case of missing entries or mismachtes. The * user-interaction can be also switched off in order to silently * accept or reject any missing or mismachting entiries. * * @nosubgrouping */ class Stream_Test_Data_Adaptor : public Interactive_Test_Data_Adaptor { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Stream_Test_Data_Adaptor Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: Stream_Test_Data_Adaptor(Self const & other); Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief @a input is used for user input, @a output is used for * reporting to the user. * * @post @ref mode() == @ref MODE_INTERACTIVE * * @throw never */ Stream_Test_Data_Adaptor(::std::istream & input, ::std::ostream & output); /** * @brief noop * * @throw never */ virtual ~Stream_Test_Data_Adaptor(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Interactive/Noninteractive mode * @{ */ public: /** * @brief The interation mode of Stream_Test_Data_Adaptor. */ typedef enum { /** * @brief prompts the user in case of mismatching or missing entries */ MODE_INTERACTIVE=0, /** * @brief rejects all mismatching or mismatching entries silently */ MODE_REJECT=1, /** * @brief accepts all mismatching or mismatching entries silently */ MODE_ACCEPT=2 } Mode_t; /** * @brief returns the current interaction mode * * throw never */ Mode_t mode() const; /** * @brief set the interaction mode * * post mode()==@a val * * throw never */ void mode(Mode_t const val); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Interface of Interactive_Test_Data_Adaptor * @{ */ protected: /** * @brief If @ref mode()== @ref MODE_INTERACTIVE, the user is * asked whether to accept @a id / @a data as new entry (@a data * can be modified). Otherwise, it returns true (false) if * @ref mode()==@ref MODE_ACCEPT (@ref MODE_REJECT). * * @throw never */ virtual bool p_missing_test_data(::std::string const & id, ::std::string & data) const; /** * @brief If @ref mode()== @ref MODE_INTERACTIVE, the user is * asked whether to accept @a new_data as new value for @a id * instead of @a data. @a new_data can be modified too. Otherwise, * it returns true (false) if @ref mode()== @ref MODE_ACCEPT * (@ref MODE_REJECT). * * @throw never */ virtual bool p_mismatching_test_data(::std::string const & id, ::std::string const & data, ::std::string & new_data) const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name State * @{ */ private: ::std::istream & m_input; ::std::ostream & m_output; Mode_t m_mode; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/stream_test_data_adaptor.t.cpp0000644000076500000240000002402711172433105025521 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/stream_test_data_adaptor.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Interactive_Test_Data_Adaptor * * $Id: stream_test_data_adaptor.t.cpp,v 1.6 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * */ #include #include #include // test support #include #include #include #define TEST_COMPONENT_NAME Stream_Test_Data_Adaptor #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief Testing mode */ void mode(Test_Data & test_data) { Stream_Test_Data_Adaptor adaptor(::std::cin, ::std::cout); TEST_ASSERT(adaptor.backend()==NULL); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_INTERACTIVE); adaptor.mode(Stream_Test_Data_Adaptor::MODE_INTERACTIVE); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_INTERACTIVE); adaptor.mode(Stream_Test_Data_Adaptor::MODE_ACCEPT); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_ACCEPT); adaptor.mode(Stream_Test_Data_Adaptor::MODE_REJECT); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_REJECT); adaptor.mode(Stream_Test_Data_Adaptor::MODE_INTERACTIVE); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_INTERACTIVE); } /** * @brief Testing get and compare when mode()==MODE_REJECT */ void get_compare_mode_reject(Test_Data & test_data) { Dummy_Test_Data_Source source; Stream_Test_Data_Adaptor adaptor(::std::cin, ::std::cout); // switch into non-interactive mode TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_INTERACTIVE); adaptor.mode(Stream_Test_Data_Adaptor::MODE_REJECT); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_REJECT); // copy for later comparision Dummy_Test_Data_Source::Data_t const data(source.data()); // backend()==NULL after construction TEST_ASSERT(adaptor.backend()==NULL); // get throws if backend()==NULL TEST_THROWING_BLOCK_ENTER; adaptor.get("1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // compare throws if backend()==NULL TEST_THROWING_BLOCK_ENTER; adaptor.compare("1","XX"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // attach and check backend() adaptor.attach(&source); TEST_ASSERT(adaptor.backend()==&source); // get of an existing entry TEST_ASSERT(adaptor.get("1")=="A"); TEST_ASSERT(adaptor.get("2")=="B"); // get of an non-existing entry TEST_THROWING_BLOCK_ENTER; adaptor.get("DOES NOT EXIST"); TEST_THROWING_BLOCK_EXIT(Test_Exception); // compare of an existing entry TEST_ASSERT(adaptor.compare("1","A")); TEST_ASSERT(!adaptor.compare("1","XXX")); TEST_ASSERT(adaptor.compare("2","B")); TEST_ASSERT(!adaptor.compare("2","XXX")); // compare of an non-existing entry TEST_THROWING_BLOCK_ENTER; adaptor.compare("DOES NOT EXIST","bla"); TEST_THROWING_BLOCK_EXIT(Test_Exception); // compare data of Test_Data_Source TEST_ASSERT(data==source.data()); } /** * @brief Testing get and compare when mode()==MODE_ACCEPT */ void get_compare_mode_accept(Test_Data & test_data) { Dummy_Test_Data_Source source; Stream_Test_Data_Adaptor adaptor(::std::cin, ::std::cout); // copy for later comparision Dummy_Test_Data_Source::Data_t data(source.data()); // switch into non-interactive mode TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_INTERACTIVE); adaptor.mode(Stream_Test_Data_Adaptor::MODE_ACCEPT); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_ACCEPT); // backend()==NULL after construction TEST_ASSERT(adaptor.backend()==NULL); // get throws if backend()==NULL TEST_THROWING_BLOCK_ENTER; adaptor.get("1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // compare throws if backend()==NULL TEST_THROWING_BLOCK_ENTER; adaptor.compare("1","XX"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // attach and check backend() adaptor.attach(&source); TEST_ASSERT(adaptor.backend()==&source); // get of an existing entry TEST_ASSERT(adaptor.get("1")=="A"); TEST_ASSERT(adaptor.get("2")=="B"); // get of an non-existing entry adaptor.get("DOES NOT EXIST"); data["DOES NOT EXIST"]=""; TEST_ASSERT(data==source.data()); // compare of an existing entry TEST_ASSERT(adaptor.compare("1","A")); TEST_ASSERT(data==source.data()); TEST_ASSERT(adaptor.compare("1","XXX")); data["1"]="XXX"; TEST_ASSERT(data==source.data()); // compare of an existing entry TEST_ASSERT(adaptor.compare("2","B")); TEST_ASSERT(data==source.data()); TEST_ASSERT(adaptor.compare("2","XXX")); data["2"]="XXX"; TEST_ASSERT(data==source.data()); // compare of an non-existing entry adaptor.compare("DOES NOT EXIST YEY","bla"); data["DOES NOT EXIST YEY"]="bla"; TEST_ASSERT(data==source.data()); } /** * @brief Testing get and compare when mode()==MODE_INTERACTIVE */ void get_compare_mode_interactive(Test_Data & test_data) { // used to control the Stream_Test_Data_Adaptor in the interactive // mode. Each character represents a yes/no decision. The decision // points are marked with in-feed below. ::std::istringstream in("r\nr\nr\nr\na\nr\na\n"); ::std::ostringstream out; Dummy_Test_Data_Source source; Stream_Test_Data_Adaptor adaptor(in,out); TEST_ASSERT(adaptor.mode()==Stream_Test_Data_Adaptor::MODE_INTERACTIVE); // copy for later comparision Dummy_Test_Data_Source::Data_t data(source.data()); // backend()==NULL after construction TEST_ASSERT(adaptor.backend()==NULL); // get throws if backend()==NULL TEST_THROWING_BLOCK_ENTER; adaptor.get("1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // compare throws if backend()==NULL TEST_THROWING_BLOCK_ENTER; adaptor.compare("1","XX"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // attach and check backend() adaptor.attach(&source); TEST_ASSERT(adaptor.backend()==&source); // get of an existing entry TEST_ASSERT(adaptor.get("1")=="A"); TEST_ASSERT(adaptor.get("2")=="B"); // in-feed 1: n // get of an non-existing entry TEST_THROWING_BLOCK_ENTER; adaptor.get("DOES NOT EXIST"); TEST_THROWING_BLOCK_EXIT(Test_Exception); // in-feed 2: n // get of an non-existing entry TEST_THROWING_BLOCK_ENTER; adaptor.get("DOES NOT EXIST"); TEST_THROWING_BLOCK_EXIT(Test_Exception); // compare of an existing entry TEST_ASSERT(adaptor.compare("1","A")); TEST_ASSERT(adaptor.compare("2","B")); // in-feed 3: n // compare of an non-existing entry TEST_THROWING_BLOCK_ENTER; adaptor.compare("DOES NOT EXIST","bla"); TEST_THROWING_BLOCK_EXIT(Test_Exception); // in-feed 4: n // compare of an mismatching entry TEST_ASSERT(!adaptor.compare("1","AA")); // compare data of Test_Data_Source TEST_ASSERT(data==source.data()); // in-feed 5: y // get of an non-existing entry TEST_ASSERT(adaptor.get("DOES NOT EXIST YET")==""); // modify and compare data of Test_Data_Source data["DOES NOT EXIST YET"]=""; TEST_ASSERT(data==source.data()); // get of a now existing entry TEST_ASSERT(adaptor.get("DOES NOT EXIST YET")==""); // in-feed 6: n // compare of a mismatching entry TEST_ASSERT(!adaptor.compare("DOES NOT EXIST YET","bla")); // get of a now existing entry TEST_ASSERT(adaptor.get("DOES NOT EXIST YET")==""); // compare data of Test_Data_Source TEST_ASSERT(data==source.data()); // in-feed 7: y // compare of a mismatching entry TEST_ASSERT(adaptor.compare("DOES NOT EXIST YET","bla")); // modify and compare data of Test_Data_Source data["DOES NOT EXIST YET"]="bla"; TEST_ASSERT(data==source.data()); // get of a now existing entry TEST_ASSERT(adaptor.get("DOES NOT EXIST YET")=="bla"); // check end of input stream char c; in >> c; TEST_ASSERT(in.eof()); // check the output stream TEST_ASSERT(test_data.compare("output",out.str())); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(Test_Data_Adaptor_Compliance (new Stream_Test_Data_Adaptor(::std::cin,::std::cout)), LEVEL_PROD); TEST_NORMAL_CASE(&mode,LEVEL_PROD); TEST_NORMAL_CASE(&get_compare_mode_interactive,LEVEL_PROD); TEST_NORMAL_CASE(&get_compare_mode_reject,LEVEL_PROD); TEST_NORMAL_CASE(&get_compare_mode_accept,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/stream_test_system.cpp0000644000076500000240000004144411324436376024176 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/stream_test_system.cpp * * @brief [LEVEL: beta] implementation of @ref diagnostics::unittest::Stream_Test_System Class * * $Id: stream_test_system.cpp,v 1.12 2005/06/23 09:56:44 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; class Stream_Test_System_Implementation { public: Stream_Test_System_Implementation(Level_t const build_level, int const argc, char const * const * argv, ::std::string const & default_test_data_file_name, ::std::string const & default_result_log_file_name, ::std::istream & in, ::std::ostream & out); ~Stream_Test_System_Implementation(); void add(Test_Suite * const test_suite); void add(Test_Case * const test_case); int run(); void interactive_run(); private: int p_run(::std::string const & mask, Level_t const level); void p_list(::std::string const & mask, Level_t const level); ::std::string p_fraction_to_string(int const value, int const total); ::std::istream & m_in; ::std::ostream & m_out; Level_t m_build_level; int const m_argc; char const * const * const m_argv; ::std::string m_test_data_file_name; ::std::string m_result_log_file_name; Test_Suite m_test_suite; File_Test_Data_Source m_test_data_source; Stream_Test_Data_Adaptor m_interactive_test_data; ::std::ofstream m_log; }; Stream_Test_System_Implementation:: Stream_Test_System_Implementation(Level_t const build_level, int const argc, char const * const * argv, ::std::string const & default_test_data_file_name, ::std::string const & default_result_log_file_name, ::std::istream & in, ::std::ostream & out) : m_in(in), m_out(out), m_build_level(build_level), m_argc(argc), m_argv(argv), m_test_data_file_name(default_test_data_file_name), m_result_log_file_name(default_result_log_file_name), m_test_suite(""), m_interactive_test_data(m_in,m_out) { // checking build level ///////////////////////////////////////////// if(build_level>=LEVEL_TEST) throw Test_System_Exception(::std::string("Build_Level '") + level_to_string(build_level) + "' failed to one of PRO,DEB, or AUD"); // checking arguments /////////////////////////////////////////////// if(m_argc>1) { int cmd_offset(0); if(::std::strcmp(m_argv[1],"-h")) { if(!::std::strcmp(m_argv[1],"-i") || !::std::strcmp(m_argv[1],"-a") || !::std::strcmp(m_argv[1],"-r")){ cmd_offset=1; if(m_argc!=5) throw Test_System_Exception(::std::string(m_argv[1])+" requires list|run "); } if(!::std::strcmp(m_argv[1+cmd_offset],"list") || !::std::strcmp(m_argv[1+cmd_offset],"run")) { using ::diagnostics::internal::from_string; using ::diagnostics::internal::to_string; if(m_argc!=4+cmd_offset) throw Test_System_Exception(::std::string(m_argv[1+cmd_offset])+" requires "); if(!mask_adheres_convention(m_argv[2+cmd_offset])) throw Test_System_Exception(::std::string("Invalid mask '") + argv[2+cmd_offset] + "'"); int const level(from_string(m_argv[3+cmd_offset])); if(level<0 || level>LEVEL_TEST) throw Test_System_Exception (::std::string("Level '") + level_to_string(static_cast(level)) + "' (numerically: " + to_string(level) + ") failed to one of PRO,DEB,AUD, or TES"); } else throw Test_System_Exception(::std::string("unknown command: '")+m_argv[1+cmd_offset]+"'"); } } // opening the result log ///////////////////////////////////////////////////////////// m_log.open(default_result_log_file_name.c_str(),::std::ios::app); if(!m_log.good()) throw Test_System_Exception(::std::string("Could not open ") + m_result_log_file_name); // loading test_data ////////////////////////////////////////////// try { m_test_data_source.load(m_test_data_file_name); } catch(Test_System_Exception & e){ ::std::ifstream s(m_test_data_file_name.c_str()); if(s.good()) // the file exists but is not properly formated throw; m_test_data_source.init(m_test_data_file_name); // we save to check, whether we can write the file m_test_data_source.save(m_test_data_file_name,true); } m_interactive_test_data.attach(&m_test_data_source); } Stream_Test_System_Implementation::~Stream_Test_System_Implementation() { try { m_test_data_source.save(m_test_data_file_name); } catch(Test_System_Exception & e){ DIAGNOSTICS_PANIC_LOG("Exception while saving '" + m_test_data_file_name + "' failed: EXCEPTION=\"Test_System_Exception\" WHAT=\"" + e.what() + "\""); } catch(...){ DIAGNOSTICS_PANIC_LOG("Unknown exception while saving test data '" + m_test_data_file_name + "'. CHANGES MIGHT BE LOST"); } } void Stream_Test_System_Implementation::add(Test_Suite * const test_suite) { m_test_suite.add(test_suite); } void Stream_Test_System_Implementation::add(Test_Case * const test_case) { m_test_suite.add(test_case); } int Stream_Test_System_Implementation::p_run(::std::string const & mask, Level_t const level) { if(!mask_adheres_convention(mask)) throw Test_System_Exception("Invalid mask '" + mask + "'"); if(level>LEVEL_TEST) throw Test_System_Exception(::std::string("Level '") + level_to_string(level) + "' failed to one of PRO,DEB,AUD, or TES"); { ::std::ostringstream buffer; buffer << "\n********************************************************************************\n" << "Started RUN with mask " << mask << "\n and level " << level_to_string(level) << "\n with build Level " << level_to_string(m_build_level) << "\n in test application " << m_argv[0] << "\n--------------------------------------------------------------------------------\n"; m_out << buffer.str(); m_log << buffer.str(); } int failed(0); int invalid(0); int success(0); // uses the List_Test_Suite_Traversal to iterate through the test // cases AND the Run_Test_Suite_Traversal to execute these Test // Cases by case by case (Run_Test_Suite_Traversal could execute // them all in one traversal). // // However, if we would use Run_Test_Suite_Traversal to execute // all test cases in a single traversal, we would get the // Test_Run_Results when ALL test cases have been executed. To // give a more immediate feedback (precisely: after the execution // of each single test case), we use construction below. // // Performance at this level is not an issue. typedef List_Test_Suite_Traversal::Test_List_Results_t List_Results_t; List_Results_t list_results; typedef Run_Test_Suite_Traversal::Test_Run_Results_t Run_Results_t; Run_Results_t run_results; List_Test_Suite_Traversal list_traversal(list_results); Run_Test_Suite_Traversal run_traversal(m_build_level,m_interactive_test_data,run_results); list_traversal.traverse(m_test_suite,mask,level); List_Results_t::const_iterator current(list_results.begin()); List_Results_t::const_iterator const end(list_results.end()); for(;current!=end;++current){ run_traversal.traverse(m_test_suite,(*current)->test_case_path(),level); m_out << *run_results[0] << '\n'; m_log << *run_results[0] << '\n'; if(run_results[0]->invalidation_count()!=0) ++invalid; else if(run_results[0]->failure_count()!=0) ++failed; else ++success; delete run_results[0]; delete *current; run_results.clear(); } int const total(failed+invalid+success); { ::std::ostringstream buffer; buffer << "--------------------------------------------------------------------------------\n" << "Finished RUN with mask " << mask << "\n and level " << level_to_string(level) << "\n with build Level " << level_to_string(m_build_level) << "\n in test application " << m_argv[0] << "\nSUCCESS " << p_fraction_to_string(success,total) << "\nFAILURES " << p_fraction_to_string(failed,total) << "\nINVALIDATIONS " << p_fraction_to_string(invalid,total) << "\nTOTAL " << ::std::setw(3) << total << "\n********************************************************************************\n"; m_out << buffer.str() << ::std::endl; m_log << buffer.str() << ::std::endl; } return (failed!=0 ? Test_System::TEST_SYSTEM_RESULT_FAILURE : 0) + (invalid!=0 ? Test_System::TEST_SYSTEM_RESULT_INVALID : 0); } ::std::string Stream_Test_System_Implementation::p_fraction_to_string(int const value, int const total) { ::std::ostringstream buffer; buffer << ::std::setw(3) << value << " (" << ::std::setw(3) << static_cast((total!=0 ? ((100*(value))/total) : 100)) << "%)"; return buffer.str(); } void Stream_Test_System_Implementation::p_list(::std::string const & mask, Level_t const level) { if(!mask_adheres_convention(mask)) throw Test_System_Exception("Invalid mask '" + mask + "'"); if(level>LEVEL_TEST) throw Test_System_Exception(::std::string("Level '") + level_to_string(level) + "' failed to one of PRO,DEB,AUD, or TES"); { ::std::ostringstream buffer; buffer << "\n********************************************************************************\n" << "Started LIST with mask " << mask << " and level " << level_to_string(level) << "\n--------------------------------------------------------------------------------"; m_out << buffer.str() << ::std::endl; m_log << buffer.str() << ::std::endl; } typedef List_Test_Suite_Traversal::Test_List_Results_t Results_t; Results_t results; List_Test_Suite_Traversal traversal(results); traversal.traverse(m_test_suite,mask,level); Results_t::const_iterator current(results.begin()); Results_t::const_iterator const end(results.end()); for(;current!=end;++current) { m_out << **current << '\n'; m_log << **current << '\n'; delete *current; } { ::std::ostringstream buffer; buffer << "--------------------------------------------------------------------------------\n" << "Finished LIST with mask " << mask << " and level " << level_to_string(level) << "\nTOTAL " << results.size() << "\n********************************************************************************" << ::std::endl; m_out << buffer.str() << ::std::endl; m_log << buffer.str() << ::std::endl; } } int Stream_Test_System_Implementation::run() { using ::diagnostics::internal::from_string; // checks on the arguments are already done by the constructor if(m_argc==1) { interactive_run(); return 0; } else { m_interactive_test_data.mode(Stream_Test_Data_Adaptor::MODE_REJECT); if(!::std::strcmp(m_argv[1],"-h")) { m_out << "Diagnostics test suite" << ::std::endl << ::std::endl << " -h Print this help message" << ::std::endl << " -i Ask in case of new data" << ::std::endl << " -r Default to reject new data" << ::std::endl << " -a Default to accept new data" << ::std::endl << " command spec:" << ::std::endl << " run Run the tests of non-interactively" << ::std::endl << " list List the available tests matching from " << ::std::endl; return 0; } int cmd_offset(0); if(!::std::strcmp(m_argv[1],"-i")) { m_interactive_test_data.mode(Stream_Test_Data_Adaptor::MODE_INTERACTIVE); cmd_offset=1; } if(!::std::strcmp(m_argv[1],"-r")) { m_interactive_test_data.mode(Stream_Test_Data_Adaptor::MODE_REJECT); cmd_offset=1; } if(!::std::strcmp(m_argv[1],"-a")) { m_interactive_test_data.mode(Stream_Test_Data_Adaptor::MODE_ACCEPT); cmd_offset=1; } if(!::std::strcmp(m_argv[1+cmd_offset],"list")){ p_list(m_argv[2+cmd_offset],static_cast(from_string(m_argv[3+cmd_offset]))); return 0; } else // if(!::std::strcmp(m_argv[1+cmd_offset],"run")) return p_run(m_argv[2+cmd_offset],static_cast(from_string(m_argv[3+cmd_offset]))); } } void Stream_Test_System_Implementation::interactive_run() { m_out << "Test Data is taken from: " << m_test_data_file_name << "\nResult Log is writen to: " << m_result_log_file_name << "\nBuild Level : " << level_to_string(m_build_level) << ::std::endl; for(;;) try { ::std::string command; ::std::string mask; int level; m_out << "> "; m_in >> command; if(m_in.eof()) break; if(command=="interactive") { int value; m_in >> value; m_interactive_test_data.mode(static_cast(value)); } else if(command=="run") { m_in >> mask; m_in >> level; p_run(mask,static_cast(level)); } else if(command=="list") { m_in >> mask; m_in >> level; p_list(mask,static_cast(level)); } else if(command=="quit") break; else { m_out << "Commands: " << ::std::endl << "run " << ::std::endl << "list " << ::std::endl << "interactive " << ::std::endl << "quit" << ::std::endl; } } catch(Test_System_Exception & e) { m_out << "An Test_System_Exception occured: " << e.what() << '\n' << ::std::endl; } /// @todo clarify } //////////////////////////////////////////////////////////////////////////////// Stream_Test_System::Stream_Test_System(Level_t const build_level, int const argc, char const * const * argv, ::std::string const & default_test_data_file_name, ::std::string const & default_result_log_file_name, ::std::istream & in, ::std::ostream & out) : m_impl(new Stream_Test_System_Implementation(build_level, argc, argv, default_test_data_file_name, default_result_log_file_name, in, out)) { } Stream_Test_System::~Stream_Test_System() { delete m_impl; } void Stream_Test_System::add(Test_Suite * const test_suite) { m_impl->add(test_suite); } void Stream_Test_System::add(Test_Case * const test_case) { m_impl->add(test_case); } int Stream_Test_System::run() { return m_impl->run(); } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/stream_test_system.hpp0000644000076500000240000001543111172433105024164 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/stream_test_system.hpp * * @brief [LEVEL: beta] Stream_Test_System Class * * $Id: stream_test_system.hpp,v 1.5 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/stream_test_system.t.cpp * */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__STREAM_TEST_SYSTEM_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__STREAM_TEST_SYSTEM_HPP__INCLUDE_GUARD // used in the interface by value #include // used as base class #include // used in the interface by reference #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference class Stream_Test_System_Implementation; /** * @class Stream_Test_System diagnostics/unittest/test_system/stream_test_system.hpp * * @brief Uses cin/cout for communication with the user. * * If started without arguments, it enters a command-loop, accepting * threee commands: * @arg run 'mask' 'level' selects all Test_Cases which match the * 'mask' and the 'level' and executes them. * @arg list 'mask' 'level' selects all Test_Cases which match the 'mask' * and 'level' and lists them. * @arg quit terminates the session. * * If started with arguments, they have to match the format run 'mask' * 'level' or list 'mask' 'level' with the same meaning as in an * interactive session. * * By default, as @ref Test_Data_Source the file test.dat and as log * file result.log is taken. * * @nosubgrouping */ class Stream_Test_System : public Test_System { //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief Stream_Test_System is a @ref Test_System which is * intended for user-interactive testing. It takes the filename * for a default test database (@a default_test_data_file_name), * the current @a build_level, a number of arguments in terms of a * @a argc, @a argv pair, and three streams for user-interaction: * @a in for user input and @a out to prompt the user. In addition * a log file with name (@a default_test_data_file_name) is opened * for permanent logging. * * @pre @a build_level < @ref LEVEL_TEST * @pre @a argc / @a argv contain either nothing, or a * run-command, or a list-command: " run 'mask' 'level'" * or " list 'mask' 'level'" with * mask_adheres_convention('mask') and * 0<='level'<=LEVEL_TES=3. equals either "", "-i", * "-a", or "-r". "-i" for interactive mode, "-a" for accepting * mode, "-r" for rejecting mode. Default is rejecting mode. * @pre TEST_DATA_FILE_NAME is a test data file in proper format, * or does not exist but can be created * @pre RESULT_LOG_FILE_NAME can be opened for appending * * @note current TEST_DATA_FILE_NAME = @a default_test_data_file_name * and RESULT_LOG_FILE_NAME = @a default_result_log_file_name * but it is planed to make them subject to @a argc / @a argv * options. * * @throw Test_System_Exception */ Stream_Test_System(Level_t const build_level, int const argc, char const * const * argv, ::std::string const & default_test_data_file_name, ::std::string const & default_result_log_file_name, ::std::istream & in, ::std::ostream & out); /** * @brief Save the current test data into @a default_test_data_file_name. * * If this is not possible, @ref DIAGNOSTICS_PANIC_LOG is used for * reporting and the data is dropped silently. * * @throw never */ virtual ~Stream_Test_System(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: virtual void add(Test_Suite * const test_suite); virtual void add(Test_Case * const test_case); /** * @brief The main loop of the @ref Stream_Test_System is entered: * If argc/argv of the Constructor contained a "run 'mask' * 'level'" or a "list 'mask' 'level'" command, this command is * executed -- without interactions in case of missing or * mismatching Test_Data entries. Otherwise the user is prompted * for a commands. * * The commands: run and list as described above. And "interactive * '0/1/2'" to switch on the interactive mode, or to switch it off * while rejecting (1)/ accepting (2) all missing/mismatching * entries. In interactive mode, missing or mismatching entries * are resolved with user interaction. In non interactive mode, * the Test_Data is never modified (typically causing the * corresponding @ref Test_Case to fail) or always modified. * * @note Future enhancements of run: Changing the logfile and the * file with the test_data. Silent exeuction -- only log-output. * * @return if called interactively, the return value is * undefined. If called non-interactively, the return value is a * flag mask: TEST_SYSTEM_RESULT_FAILURE is present for test failures, * TEST_SYSTEM_RESULT_INVALID is present for invalid test runs. * * @throw never */ virtual int run(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Insulated State * @{ */ private: Stream_Test_System_Implementation * m_impl; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/stream_test_system.t.cpp0000644000076500000240000003616111172433105024424 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/stream_test_system.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Interactive_Test_Data_Adaptor * * $Id: stream_test_system.t.cpp,v 1.7 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @todo more tests * */ #include #include #include #include #include #include #include #include #define TEST_COMPONENT_NAME Stream_Test_System #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief Testing is_interactive and interactive */ void incorrect_construction(Test_Data & test_data) { char const * argv[5]; // a correct one to begin with { ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; Stream_Test_System s(LEVEL_PROD, 1, argv, "test/blub.dat", "test/result_log_file", in, out); } // wrong build level ////////////////////////////////////// TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; Stream_Test_System s(LEVEL_TEST, // <- 1, argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; Stream_Test_System s(LEVEL_SYSTEM, // <- 1, argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // invalid test_data file name /////////////////////////////////// TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; Stream_Test_System s(LEVEL_AUDIT, 1, argv, "A_DIRECTORY_THAT_DOES_NOT_EXIST/AND_A_FILE_YOU_CANNOT_OPEN", // <- "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // invalid result_log_file file name /////////////////////////////////// TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; Stream_Test_System s(LEVEL_AUDIT, 1, argv, "test/blub.dat", "A_DIRECTORY_THAT_DOES_NOT_EXIST/AND_A_FILE_YOU_CANNOT_OPEN", // <- in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // a working one { ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="run"; argv[2]="/*"; argv[3]="2"; Stream_Test_System s(LEVEL_AUDIT, 4, argv, "test/blub.dat", "test/result_log_file", in, out); } // wronge number of arguments ///////////////////////////////////////// TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="run"; argv[2]="/*"; argv[3]="2"; Stream_Test_System s(LEVEL_AUDIT, 2, // <- argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="run"; argv[2]="/*"; argv[3]="2"; Stream_Test_System s(LEVEL_AUDIT, 3, // <- argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // unknown argument ///////////////////////////////////////////////////// TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="run1"; // <- argv[2]="/*"; argv[3]="2"; Stream_Test_System s(LEVEL_AUDIT, 4, argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="bla"; // <- argv[2]="/*"; argv[3]="2"; Stream_Test_System s(LEVEL_AUDIT, 4, argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // invalid mask ////////////////////////////////////////////////// TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="run"; argv[2]="----"; // <- argv[3]="2"; Stream_Test_System s(LEVEL_AUDIT, 4, argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // invalid level for the command TEST_THROWING_BLOCK_ENTER; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="run"; argv[2]="/*"; argv[3]="10"; // <- Stream_Test_System s(LEVEL_AUDIT, 4, argv, "test/blub.dat", "test/result_log_file", in, out); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } void call_by_commandline_return_value(Test_Data & test_data, bool const invalid, bool const failure) { using ::diagnostics::unittest::testing::blind_test_run_result; char const * argv[5]; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]="run"; argv[2]="/*"; argv[3]="3"; ::std::string const test_data_key(::std::string(invalid ? "invalid " : "valid ")+ ::std::string(failure ? "failure " : "success")); Stream_Test_System s(LEVEL_DEBUG, 4, argv, "test/blub.dat", "test/result_log_file", in, out); Dummy_Test_Case * const tc1(new Dummy_Test_Case("test_case_1",3,true,true,true,true,invalid, failure)); Dummy_Test_Case * const tc2(new Dummy_Test_Case("test_case_2",3,true,true,true,true,invalid, failure)); s.add(tc1); s.add(tc2); int result; TEST_NO_IMPLICIT_LOGGING_ENTER; result=s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,1); TEST_ASSERT_RELATION(tc2->run_count(),==,1); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+test_data_key, blind_test_run_result(out.str()))); TEST_ASSERT_RELATION(result,==,(invalid ? Test_System::TEST_SYSTEM_RESULT_INVALID : (failure ? Test_System::TEST_SYSTEM_RESULT_FAILURE : 0))); } /** * @brief [PROD] Testing the return value of the run() method */ void calling_by_commandline_return_value(Test_Data & test_data) { call_by_commandline_return_value(test_data,false,false); call_by_commandline_return_value(test_data,false,true); call_by_commandline_return_value(test_data,true,false); call_by_commandline_return_value(test_data,true,true); } void call_by_commandline(Test_Data & test_data, ::std::string const & arg1, ::std::string const & arg2, ::std::string const & arg3, int const calls1, int const calls2) { using ::diagnostics::unittest::testing::blind_test_run_result; char const * argv[5]; ::std::istringstream in; ::std::ostringstream out; argv[0]="NAME"; argv[1]=arg1.c_str(); argv[2]=arg2.c_str(); argv[3]=arg3.c_str(); ::std::string const test_data_key(arg1+" "+arg2+" "+arg3); Stream_Test_System s(LEVEL_DEBUG, // test case 2 has target level DEBUG 4, argv, "test/blub.dat", "test/result_log_file", in, out); Dummy_Test_Case * const tc1(new Dummy_Test_Case("test_case_1",3,true,true,true,true)); Dummy_Test_Case * const tc2(new Dummy_Test_Case("test_case_2",3,true,false,true,true)); s.add(tc1); s.add(tc2); // one run TEST_NO_IMPLICIT_LOGGING_ENTER; s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,calls1); TEST_ASSERT_RELATION(tc2->run_count(),==,calls2); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+test_data_key, blind_test_run_result(out.str()))); // a second run TEST_NO_IMPLICIT_LOGGING_ENTER; s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,calls1*2); TEST_ASSERT_RELATION(tc2->run_count(),==,calls1*2); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+test_data_key+" repeated", blind_test_run_result(out.str()))); } /** * @brief [PROD] Testing the run() method when controlled by argc/argv */ void calling_by_commandline(Test_Data & test_data) { // note -- invalid arguments are already handled by // incorrect_construction call_by_commandline(test_data,"run","/*","3",1,1); call_by_commandline(test_data,"run","/*","1",1,1); call_by_commandline(test_data,"list","/*","3",0,0); call_by_commandline(test_data,"list","/*","2",0,0); call_by_commandline(test_data,"list","/*","1",0,0); call_by_commandline(test_data,"list","/*","0",0,0); call_by_commandline(test_data,"list","/test_case_1","3",0,0); call_by_commandline(test_data,"list","/test_case_1","2",0,0); call_by_commandline(test_data,"list","/test_case_1","1",0,0); call_by_commandline(test_data,"list","/test_case_1","0",0,0); call_by_commandline(test_data,"list","/test_case_2","3",0,0); call_by_commandline(test_data,"list","/test_case_2","2",0,0); call_by_commandline(test_data,"list","/test_case_2","1",0,0); call_by_commandline(test_data,"list","/test_case_2","0",0,0); call_by_commandline(test_data,"list","/noop","3",0,0); } /** * @brief [PROD] Testing the run() method when interactively */ void calling_by_interactively(Test_Data & test_data) { using ::diagnostics::unittest::testing::blind_test_run_result; char const * argv[1]; argv[0]="NAME"; { Dummy_Test_Case * const tc1(new Dummy_Test_Case("test_case_1",3,true,true,true,true)); Dummy_Test_Case * const tc2(new Dummy_Test_Case("test_case_2",3,true,false,true,true)); ::std::istringstream in("list /* 3\n" "run /* 3\n" "interactive 0\n" "interactive 1\n" "interactive 2\n" "run /test_case_1 0\n" "run /test_case_2 0\n" "run /* 0\n"); ::std::ostringstream out; Stream_Test_System s(LEVEL_DEBUG,1,argv,"test/blub.dat","test/result_log_file",in,out); s.add(tc1); s.add(tc2); TEST_NO_IMPLICIT_LOGGING_ENTER; s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,1+1+1); TEST_ASSERT_RELATION(tc2->run_count(),==,1+0+0); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+"interactive1", blind_test_run_result(out.str()))); } { Dummy_Test_Case * const tc1(new Dummy_Test_Case("test_case_1",3,true,true,true,true)); Dummy_Test_Case * const tc2(new Dummy_Test_Case("test_case_2",3,true,false,true,true)); ::std::istringstream in("list /* 3\n" "quit\n" "run /* 3\n"); ::std::ostringstream out; Stream_Test_System s(LEVEL_DEBUG,1,argv,"test/blub.dat","test/result_log_file",in,out); s.add(tc1); s.add(tc2); TEST_NO_IMPLICIT_LOGGING_ENTER; s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,0); TEST_ASSERT_RELATION(tc2->run_count(),==,0); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+"interactive2", blind_test_run_result(out.str()))); } { Dummy_Test_Case * const tc1(new Dummy_Test_Case("test_case_1",3,true,true,true,true)); Dummy_Test_Case * const tc2(new Dummy_Test_Case("test_case_2",3,true,false,true,true)); ::std::istringstream in("list /* 3\n" "thiscommanddoesnotexist\n" "run /* 3\n"); ::std::ostringstream out; Stream_Test_System s(LEVEL_DEBUG,1,argv,"test/blub.dat","test/result_log_file",in,out); s.add(tc1); s.add(tc2); TEST_NO_IMPLICIT_LOGGING_ENTER; s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,1); TEST_ASSERT_RELATION(tc2->run_count(),==,1); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+"interactive3", blind_test_run_result(out.str()))); } { Dummy_Test_Case * const tc1(new Dummy_Test_Case("test_case_1",3,true,true,true,true)); Dummy_Test_Case * const tc2(new Dummy_Test_Case("test_case_2",3,true,false,true,true)); ::std::istringstream in("list /* 3\n" "run /* 33\n" "run /* 3\n"); ::std::ostringstream out; Stream_Test_System s(LEVEL_DEBUG,1,argv,"test/blub.dat","test/result_log_file",in,out); s.add(tc1); s.add(tc2); TEST_NO_IMPLICIT_LOGGING_ENTER; s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,1); TEST_ASSERT_RELATION(tc2->run_count(),==,1); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+"interactive4", blind_test_run_result(out.str()))); } { Dummy_Test_Case * const tc1(new Dummy_Test_Case("test_case_1",3,true,true,true,true)); Dummy_Test_Case * const tc2(new Dummy_Test_Case("test_case_2",3,true,false,true,true)); ::std::istringstream in("list /* 3\n" "run /*h 3\n" "run /* 3\n"); ::std::ostringstream out; Stream_Test_System s(LEVEL_DEBUG,1,argv,"test/blub.dat","test/result_log_file",in,out); s.add(tc1); s.add(tc2); TEST_NO_IMPLICIT_LOGGING_ENTER; s.run(); TEST_NO_IMPLICIT_LOGGING_EXIT; TEST_ASSERT_RELATION(tc1->run_count(),==,1); TEST_ASSERT_RELATION(tc2->run_count(),==,1); TEST_ASSERT(test_data.compare(DIAGNOSTICS_COMPILATION_MODE_ID+"interactive5", blind_test_run_result(out.str()))); } } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&incorrect_construction,LEVEL_PROD); TEST_NORMAL_CASE(&calling_by_commandline,LEVEL_PROD); TEST_NORMAL_CASE(&calling_by_interactively,LEVEL_PROD); TEST_NORMAL_CASE(&calling_by_commandline_return_value,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_adaptor.cpp0000644000076500000240000000322311172433105023677 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_adaptor.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::Test_Data_Adaptor interface * * $Id: test_data_adaptor.cpp,v 1.5 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Data_Adaptor::~Test_Data_Adaptor() { } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_adaptor.hpp0000644000076500000240000000654311172433105023714 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_adaptor.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Data_Adaptor interface * * $Id: test_data_adaptor.hpp,v 1.11 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @test Interface Compliance Test-Suite: diagnostics/unittest/test_system/test_data_adaptor.ts.hpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_DATA_ADAPTOR_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_DATA_ADAPTOR_HPP__INCLUDE_GUARD // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference // class Test_Data_Source; /** * @class Test_Data_Adaptor diagnostics/unittest/test_system/test_data_adaptor.hpp * * @brief a Test_Data_Adaptor adapts a @ref Test_Data_Source to @ref * Test_Data interface. * * Different Test_Data_Adaptors correspond to different interactions * with the user of the unittest environment. For example, in a batch * run, the user might wish a read-only Test_Data interface, but in an * interactive run, the user might want to have manual control in case * of conflicts (a missing entry, or a mismatching entry). * * @nosubgrouping */ class Test_Data_Adaptor : public Test_Data { public: /** * @throw never */ virtual ~Test_Data_Adaptor(); //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: /** * @brief attaches @a test_data_source to the adaptor -- ownership is NOT changed. * * @post POST.backend() == @a backend * * @throw Test_System_Exception if test_data_source==NULL */ virtual void attach(Test_Data_Source * const backend) =0; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief returns the current backend. * * @throw never */ virtual Test_Data_Source* backend() const=0; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_adaptor.ts.cpp0000644000076500000240000000666711172433105024343 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_adaptor.ts.cpp * * @brief [LEVEL: beta] Implementation of the compliance test for * @ref diagnostics::unittest::Test_Data_Adaptor * * $Id: test_data_adaptor.ts.cpp,v 1.11 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include // used components #include #include // test support #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; Test_Data_Adaptor_Compliance::Test_Data_Adaptor_Compliance(Test_Data_Adaptor * const adaptor) : m_adaptor(adaptor) { } Test_Data_Adaptor_Compliance::Test_Data_Adaptor_Compliance(Self const & other) : m_adaptor(other.m_adaptor) { } Test_Data_Adaptor_Compliance & Test_Data_Adaptor_Compliance::operator=(Self const & other) { m_adaptor=other.m_adaptor; return *this; } void Test_Data_Adaptor_Compliance::operator()(Test_Data & test_data) const { Dummy_Test_Data_Source source; // copy for later comparision Dummy_Test_Data_Source::Data_t const data(source.data()); // backend()==NULL after construction TEST_ASSERT(m_adaptor->backend()==NULL); // get() throws if backend()==NULL TEST_THROWING_BLOCK_ENTER; m_adaptor->get("1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // attach(NULL) throws and does not change backend() TEST_THROWING_BLOCK_ENTER; m_adaptor->attach(NULL); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(m_adaptor->backend()==NULL); // attach(&source) --> backend()==&source and get does not throw m_adaptor->attach(&source); TEST_ASSERT(m_adaptor->backend()==&source); // attach(NULL) throws and does not change backend() TEST_THROWING_BLOCK_ENTER; m_adaptor->attach(NULL); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_ASSERT(m_adaptor->backend()==&source); // we can access the 1 TEST_ASSERT(m_adaptor->get("1")=="A"); // compare data of Test_Data_Source TEST_ASSERT(data==source.data()); } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_adaptor.ts.hpp0000644000076500000240000000471111172433105024334 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_adaptor.ts.hpp * * @brief [LEVEL: beta] compliance test for @ref * diagnostics::unittest::Test_Data_Adaptor * * $Id: test_data_adaptor.ts.hpp,v 1.6 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference // diagnostics/unittest/test_system/test_data_adaptor.hpp class Test_Data_Adaptor; // used in the interface by reference // diagnostics/unittest/test_data.hpp class Test_Data; TEST_NAMESPACE_BEGIN; /** * @brief Compliance test for @ref Test_Data_Adaptor */ class Test_Data_Adaptor_Compliance { private: typedef Test_Data_Adaptor_Compliance Self; public: /** * @brief does not take ownership of @a adaptor * * @pre @a adaptor.backend()==NULL */ Test_Data_Adaptor_Compliance(Test_Data_Adaptor * const adaptor); Test_Data_Adaptor_Compliance(Self const &); Self & operator=(Self const &); void operator()(Test_Data & test_data) const; private: Test_Data_Adaptor * m_adaptor; }; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_source.cpp0000644000076500000240000000321611172433105023547 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_source.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::Test_Data_Source interface * * $Id: test_data_source.cpp,v 1.5 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Data_Source::~Test_Data_Source() { } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_source.hpp0000644000076500000240000001012011172433105023544 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_source.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Data_Source * interface * * $Id: test_data_source.hpp,v 1.12 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @test Interface Compliance Test-Suite: diagnostics/unittest/test_system/test_data_source.ts.hpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_DATA_SOURCE_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_DATA_SOURCE_HPP__INCLUDE_GUARD #include #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Test_Data_Source diagnostics/unittest/test_system/test_data_source.hpp * * @brief a Test_Data_Source allows to maintain a map * ::std::string->::std::string as underlying database for a @ref * Test_Data implementation. However, the implementation details are * hidden and access is limited. * * There are only three access methods: @ref exists_entry checks * whether an entry exists, @ref get_entry returns an existing entry * and @ref set_entry sets a new entry or modifies an existing one. * * @nosubgrouping */ class Test_Data_Source { public: /** * @throw never */ virtual ~Test_Data_Source(); //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief returns true if the contained set of entries is in a * defined state. * * @throw never */ virtual bool is_initialized() const=0; /** * @brief true iff an entry with @a id exists. * * @pre is_initialized()==true * * @throw Test_System_Exception if is_initialized()==false */ virtual bool exists_entry(::std::string const & id) const =0; /** * @brief retuns the entry with @a id * * @pre is_initialized()==true * @pre exists_entry(@a id)==true * * @throw Test_System_Exception if a precondition is not met OR * the implementation is not able to serve the request for * whatever implementation-dependent reason (such as disk full) */ virtual ::std::string const & get_entry(::std::string const & id) const =0; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: /** * @brief sets the string with @a id to @a value * * @pre is_initialized()==true * * @throw Test_System_Exception if the precondition is not met OR * the implementation is not able to serve the request for whatever * implementation-dependent reason (such as disk full) */ virtual void set_entry(::std::string const & id, ::std::string const & value) =0; //@} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_source.ts.cpp0000644000076500000240000001005511172433105024173 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_source.ts.cpp * * @brief [LEVEL: beta] Implementation of the compliance test for * @ref diagnostics::unittest::Test_Data_Source * * $Id: test_data_source.ts.cpp,v 1.6 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; Test_Data_Source_Compliance::Test_Data_Source_Compliance(Test_Data_Source * const source_init, Test_Data_Source * const source) : m_source_init(source_init), m_source(source) { } Test_Data_Source_Compliance::Test_Data_Source_Compliance(Self const & other) : m_source_init(other.m_source_init), m_source(other.m_source) { } Test_Data_Source_Compliance & Test_Data_Source_Compliance::operator=(Self const & other) { m_source_init=other.m_source_init; m_source=other.m_source; return *this; } void Test_Data_Source_Compliance::operator()(Test_Data & test_data) const { //////////////////////////////////////////////////////////////////////////////// // uninitialized TEST_ASSERT(m_source->is_initialized()==false); TEST_THROWING_BLOCK_ENTER; m_source->exists_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; m_source->get_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; m_source->set_entry("x","y"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); //////////////////////////////////////////////////////////////////////////////// // initilized TEST_ASSERT(m_source_init->is_initialized()==true); TEST_ASSERT(m_source_init->exists_entry("x")==false); TEST_THROWING_BLOCK_ENTER; m_source_init->get_entry("x"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // set now m_source_init->set_entry("x","y"); TEST_ASSERT(m_source_init->get_entry("x")=="y"); TEST_THROWING_BLOCK_ENTER; m_source_init->get_entry("x1"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // set another one m_source_init->set_entry("x1","y1"); TEST_ASSERT(m_source_init->get_entry("x")=="y"); TEST_ASSERT(m_source_init->get_entry("x1")=="y1"); TEST_THROWING_BLOCK_ENTER; m_source_init->get_entry("x2"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // overwrite m_source_init->set_entry("x","Y"); TEST_ASSERT(m_source_init->get_entry("x")=="Y"); TEST_ASSERT(m_source_init->get_entry("x1")=="y1"); TEST_THROWING_BLOCK_ENTER; m_source_init->get_entry("x2"); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_data_source.ts.hpp0000644000076500000240000000517611172433105024210 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_data_source.ts.hpp * * @brief [LEVEL: beta] compliance test for @ref * diagnostics::unittest::Test_Data_Source * * $Id: test_data_source.ts.hpp,v 1.5 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference // diagnostics/unittest/test_system/test_data_source.hpp class Test_Data_Source; // used in the interface by reference // diagnostics/unittest/test_data.hpp class Test_Data; TEST_NAMESPACE_BEGIN; /** * @brief Compliance test for @ref Test_Data_Source */ class Test_Data_Source_Compliance { private: typedef Test_Data_Source_Compliance Self; public: /** * @brief does not take ownership of @a source * * @pre @a source.is_initialized()==false * @pre @a source_init.is_initialized()==true * @pre forall A @a source_init.exists_entry(A)==false */ Test_Data_Source_Compliance(Test_Data_Source * const source_init, Test_Data_Source * const source); Test_Data_Source_Compliance(Self const &); Self & operator=(Self const &); void operator()(Test_Data & test_data) const; private: Test_Data_Source * m_source_init; Test_Data_Source * m_source; }; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_list_result.cpp0000644000076500000240000000734111172433105023632 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_list_result.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::Test_List_Result class * * $Id: test_list_result.cpp,v 1.7 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_List_Result::Test_List_Result(::std::string const & path, int const timeout, bool const is_rerunable, bool const is_testable_at_prod, bool const is_testable_at_debug, bool const is_testable_at_audit) : m_test_case_path(path), m_timeout(timeout), m_is_rerunable(is_rerunable), m_levels((is_testable_at_prod ? (1<, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_list_result.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_List_Result class * * $Id: test_list_result.hpp,v 1.13 2005/06/23 09:54:26 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/test_list_result.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_LIST_RESULT_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_LIST_RESULT_HPP__INCLUDE_GUARD #include // used in the interface by value #include // used in the interface by reference #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Test_List_Result diagnostics/unittest/test_system/test_list_result.hpp * * @brief a Test_List_Result represents the data on a single Test_Case * generated by a @ref List_Test_Suite_Traversal. * * @nosubgrouping */ class Test_List_Result { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Test_List_Result Self; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: Test_List_Result(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief assembly-cstr * * @pre @ref path_adheres_convention(@a path)==true * @pre timeout>=0 * * @throw Test_System_Exception the preconditions are not met */ Test_List_Result(::std::string const & path, int const timeout, bool const is_rerunable, bool const is_testable_at_prod, bool const is_testable_at_debug, bool const is_testable_at_audit ); /** * @throw never */ Test_List_Result(Self const & other); /** * @throw never */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Comparision * @{ */ public: /** * @throw never */ bool operator==(Self const & r) const; /** * @throw never */ inline bool operator!=(Self const & r) const { return !operator==(r); } // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief a path to the @ref Test_Case (if generated by @ref * List_Test_Suite_Traversal, then it is the complete path wrt. * the @ref Test_Suite used as argument in the @ref * List_Test_Suite_Traversal::traverse call). * * @throw never */ inline ::std::string const & test_case_path() const { return m_test_case_path; } /** * @brief the timeout of the @ref Test_Case (HYBRID: 0 means no timeout at all) * * @throw never */ inline int timeout() const { return m_timeout; } /** * @brief whether the @ref Test_Case can be run twice within the same process * * @throw never */ inline bool is_rerunable() const { return m_is_rerunable; } /** * @brief whether the @ref Test_Case is supposed to succeed at build level @a level. * * @pre @a level != @ref LEVEL_TEST * * @throw @ref Test_System_Exception if the precondition is not met */ bool is_testable_at(Level_t const level) const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: ::std::string m_test_case_path; int m_timeout; bool m_is_rerunable; int m_levels; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; /** * @brief prints a @ref diagnostics::unittest::Test_List_Result in one line (no new line) * * @throw never */ ::std::ostream & operator<<(::std::ostream & stream, ::diagnostics::unittest::Test_List_Result const & r); #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_list_result.t.cpp0000644000076500000240000001260111172433105024067 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_list_result.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Test_List_Result * * $Id: test_list_result.t.cpp,v 1.11 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include // used components #include #define TEST_COMPONENT_NAME Test_List_Result #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief [PRO] fct/abnormal: is_testable_at with LEVEL_TEST */ void is_testable_at(Test_Data & test_data) { using ::diagnostics::internal::to_string; // cstr Test_List_Result t("/path",2,true,true,true,false); TEST_ASSERT(t.is_testable_at(LEVEL_PROD)==true); TEST_ASSERT(t.is_testable_at(LEVEL_DEBUG)==true); TEST_ASSERT(t.is_testable_at(LEVEL_AUDIT)==false); TEST_THROWING_BLOCK_ENTER; t.is_testable_at(LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } /** * @brief [PRO] fct/abnormal: assembly-cstr */ void assembly_cstr(Test_Data & test_data) { TEST_THROWING_BLOCK_ENTER; Test_List_Result t("path",2,true,true,true,true); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); Test_List_Result t("/path",0,true,true,true,true); TEST_THROWING_BLOCK_ENTER; Test_List_Result t("/path",-1,true,true,true,true); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } /** * @brief [PRO] fct/normal: all cstrs, assignment, comparision */ void cstr_copy_assign_compare(Test_Data & test_data) { using ::diagnostics::internal::to_string; // cstr Test_List_Result t("/path",2,true,true,true,true); TEST_ASSERT(t.test_case_path()=="/path"); TEST_ASSERT(t.timeout()==2); TEST_ASSERT(t.is_rerunable()==true); TEST_ASSERT(test_data.compare("t",to_string(t))); // self cmp and assign TEST_ASSERT(t==t); t=t; TEST_ASSERT(t.test_case_path()=="/path"); TEST_ASSERT(t.timeout()==2); TEST_ASSERT(t.is_rerunable()==true); TEST_ASSERT(test_data.compare("t",to_string(t))); // cstr Test_List_Result t2("/path1",0,false,true,true,true); TEST_ASSERT(t2.test_case_path()=="/path1"); TEST_ASSERT(t2.timeout()==0); TEST_ASSERT(t2.is_rerunable()==false); TEST_ASSERT(test_data.compare("t2",to_string(t2))); // self cmp and assign TEST_ASSERT(t2==t2); t2=t2; TEST_ASSERT(t2.test_case_path()=="/path1"); TEST_ASSERT(t2.timeout()==0); TEST_ASSERT(t2.is_rerunable()==false); TEST_ASSERT(test_data.compare("t2",to_string(t2))); // default cstr Test_List_Result t3("/path1",0,false,true,false,true); TEST_ASSERT(test_data.compare("t3",to_string(t3))); // self cmp and assign TEST_ASSERT(t3==t3); t3=t3; TEST_ASSERT(test_data.compare("t3",to_string(t3))); // all different TEST_ASSERT(t!=t2); TEST_ASSERT(t!=t3); TEST_ASSERT(t2!=t3); // assign t3=t; TEST_ASSERT(t==t3); TEST_ASSERT(t!=t2); TEST_ASSERT(t2!=t3); TEST_ASSERT(test_data.compare("t",to_string(t3))); // copy cstr Test_List_Result t4(t3); TEST_ASSERT(test_data.compare("t",to_string(t4))); TEST_ASSERT(t4==t3); } /** * @brief [PRO] fct/normal: assembly cstr with all combination of is_testable_at */ void all_combinations(Test_Data & test_data) { int i; for(i=0;i<8;++i) { Test_List_Result t("/path",2,true,i&(1<(i&(1<(i&(1<(i&(1<, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_logger.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::Test_Logger Class * * $Id: test_logger.cpp,v 1.15 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include // for DIAGNOSTICS_PANIC_LOG #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Logger::Test_Logger(Level_t const build_level, Level_t const target_level, Test_Run_Results_t & test_run_results) : m_build_level(build_level), m_target_level(target_level), m_test_run_results(test_run_results) { if(build_level==LEVEL_TEST) throw Test_System_Exception("build_level!=LEVEL_TEST failed"); if(target_level==LEVEL_TEST) throw Test_System_Exception("target_level!=LEVEL_TEST failed"); if(build_level==LEVEL_SYSTEM) throw Test_System_Exception("build_level!=LEVEL_SYSTEM failed"); if(target_level==LEVEL_SYSTEM) throw Test_System_Exception("target_level!=LEVEL_SYSTEM failed"); if(build_level=target_level"); } Test_Logger::~Test_Logger() { } Test_Logger::Abstract_State_t Test_Logger::abstract_state() const { if(m_test_run_results.size()==0) return STATE_PASSIVE; return (m_test_run_results.back()->abstract_state()==Test_Run_Result::STATE_INCOMPLETE) ? STATE_ACTIVE : STATE_PASSIVE; } void Test_Logger::log(Record const & record) { using ::diagnostics::internal::to_string; if(m_test_run_results.size()==0) { if(record.type()==TYPE_TESTCASE_ENTER) { m_test_run_results.push_back(new Test_Run_Result(m_build_level,m_target_level)); m_test_run_results.back()->add_record(record); } else if(record.type()==TYPE_TESTCASE_EXIT) DIAGNOSTICS_PANIC_LOG("TYPE_TESTCASE_EXIT without TYPE_TESTCASE_ENTER: " + to_string(record)); return; } switch(m_test_run_results.back()->abstract_state()){ case Test_Run_Result::STATE_COMPLETE: if(record.type()==TYPE_TESTCASE_ENTER) { m_test_run_results.push_back(new Test_Run_Result(m_build_level,m_target_level)); m_test_run_results.back()->add_record(record); } else if(record.type()==TYPE_TESTCASE_EXIT) DIAGNOSTICS_PANIC_LOG("TYPE_TESTCASE_EXIT without TYPE_TESTCASE_ENTER: " + to_string(record)); break; case Test_Run_Result::STATE_INCOMPLETE: if(record.level()==LEVEL_TEST || record.type()==TYPE_FAILED_ASSERTION || record.type()==TYPE_UNEXPECTED_EXCEPTION || (record.type()==TYPE_FAILED_CHECK && record.level()>m_target_level)) { try{ m_test_run_results.back()->add_record(record); } catch(Test_System_Exception & e){ DIAGNOSTICS_PANIC_LOG(::std::string("excep.name=\"") + e.name()+"\" execp.what=\""+e.what()+"\""); } catch(...){ DIAGNOSTICS_PANIC_LOG("Unknown Exception"); } } break; case Test_Run_Result::STATE_EMPTY: DIAGNOSTICS_PANIC_LOG("empty TEST_RUN_RESULT -- should never happen: " + to_string(record)); break; } } void Test_Logger::close() { } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_logger.hpp0000644000076500000240000002207411172433105022545 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_logger.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Logger Class * * $Id: test_logger.hpp,v 1.12 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/test_logger.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_LOGGER_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_LOGGER_HPP__INCLUDE_GUARD #include // used as base class #include // used in the interface by value #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in ther interface by reference // diagnostics/unittest/test_system/test_run_result.hpp class Test_Run_Result; /** * @class Test_Logger diagnostics/unittest/test_system/test_logger.hpp * * This class is used to fill a vector of Test_Run_Results. For each * @ref Test_Case which is executed while this logger is registered * (via @ref Logging_Config::register_logger), a @ref Test_Run_Result * is added to the vector of Test_Run_Results. All records which * appear between a @ref TYPE_TESTCASE_ENTER and a @ref * TYPE_TESTCASE_EXIT and which are either of @ref * TYPE_FAILED_ASSERTION or at @ref LEVEL_TEST are fed into the * corresponding @ref Test_Run_Result. Also, we feed those records of * type @ref TYPE_FAILED_CHECK into the @ref Test_Run_Result, which * come with a level larger than the target_level. * * In other words, once a @ref TYPE_TESTCASE_ENTER occurs, the logger * becomes active (@ref STATE_ACTIVE) until a @ref TYPE_TESTCASE_EXIT * occurs to bring the logger back into a passive state (@ref STATE_PASSIVE). * * Each such @ref Test_Run_Result is initialized with build-level of * the test-code (which must be supplied to the logger in its * constructor). * * @nosubgrouping */ class Test_Logger : public Logger { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ public: typedef Test_Logger Self; typedef ::std::vector Test_Run_Results_t; /** * @brief Abstract State of this class. */ typedef enum { /** * @brief the logger is currently recording, i.e., storing the * incoming records into a corresponding @ref Test_Run_Result. */ STATE_ACTIVE, /** * @brief the logger does not record at the moment, i.e., it * drops all incoming records. */ STATE_PASSIVE } Abstract_State_t; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief Assembly-Cstr: @a build_level, the @a target_level and * the vector of Test_Run_Results to be filled by the logger. * * The @a build_level is compilation/link-level of the test-code * itself -- this level is stored in each @ref Test_Run_Result * since a Test_Case can behave differently under different * build_levels, in fact, in higher build_levels we employ checks * which can not afforded in production code. Therefore, the code * behaves differently, and consequently, it has to be tested at * all levels. * * The @a target_level is lowest build-level for which a Test_Case * should work correctly. If a Test_Case is targeted for @ref * LEVEL_PROD, it should work properly in @ref LEVEL_DEBUG and in * @ref LEVEL_AUDIT -- however, in none of these three levels, a * check or assertion of @ref LEVEL_AUDIT or @ref LEVEL_DEBUG * should be triggered. * * The converse is not true: A Test targeted for @ref LEVEL_DEBUG * might validate the additional checks of the LEVEL_DEBUG, and * therefore would not succeed if built and executed at level * LEVEL_PROD. * * @pre @a build_level != @ref LEVEL_TEST * @pre @a build_level != @ref LEVEL_SYSTEM * @pre @a target_level != @ref LEVEL_TEST * @pre @a target_level != @ref LEVEL_SYSTEM * @pre @a build_level >= @a target_level * * @throw Test_System_Exception if the precondtion is not met */ Test_Logger(Level_t const build_level, Level_t const target_level, Test_Run_Results_t & test_run_results); /** * @brief do nothing * * @throw never */ virtual ~Test_Logger(); private: /** * @brief not available */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief the abstract state of the instance * * @throw never */ Abstract_State_t abstract_state() const; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: /** * @brief dispatching the records to the @ref Test_Run_Result * * This method uses @ref DIAGNOSTICS_PANIC_LOG to report problems * -- thus it never throws. For each complete execution of a @ref * Test_Case (defined to start with a @ref TYPE_TESTCASE_ENTER and * to finish with a @ref TYPE_TESTCASE_EXIT) it opens a @ref * Test_Run_Result and feeds all records belonging to the * execution of this Test_Case into the corresponding * Test_Run_Result. * * @attention In the following postcondition we present all valid * transitions. If none of the above implicants is met, a message * is written to the @ref DIAGNOSTICS_PANIC_LOG -- and the record * is ignored. * * @note if @a record.level()== @ref LEVEL_SYSTEM then the * internal @ref Test_Run_Result will ignore the record. However, * we do not check, since @ref LEVEL_SYSTEM messages occur at a * low rate. * * @post (PRE.abstract_state() == @ref STATE_PASSIVE * && @a record.type() == @ref TYPE_TESTCASE_ENTER) * --> POST.abstract_state()== @ref STATE_ACTIVE * [a new Test_Run_Result is opened and the current @a record is added to it] * * @post (PRE.abstract_state() == @ref STATE_ACTIVE * && @a record.type() == @ref TYPE_TESTCASE_EXIT) * --> POST.abstract_state()== @ref STATE_PASSIVE * [the current @a record is added to the current @ref Test_Run_Result, * then the @ref Test_Run_Result is closed] * * @post (PRE.abstract_state() == @ref STATE_PASSIVE * && @a record.type() != TYPE_TESTCASE_*) * --> POST.abstract_state()== @ref STATE_PASSIVE * * @post (PRE.abstract_state() == @ref STATE_ACTIVE * && @a record.type() != TYPE_TESTCASE_*) * --> POST.abstract_state()== @ref STATE_ACTIVE * [@a record is added to the current Test_Run_Result, iff * record.level() == @ref LEVEL_TEST * || record.type() == @ref TYPE_FAILED_ASSERTION * || record.type() == @ref TYPE_UNEXPECTED_EXCEPTION * || (record.type() == @ref TYPE_FAILED_CHECK * && record.level()> PRE.m_target_level] * * * @throw never */ virtual void log(Record const & record); /** * @brief closing -- do nothing * * @note In the current usage, the Test_Logger is not receiving * this message, since it is unregistered after testing. However, * if it ever happens, it will do exactly nothing. * * @throw never */ virtual void close(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: Level_t const m_build_level; Level_t const m_target_level; Test_Run_Results_t & m_test_run_results; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_logger.t.cpp0000644000076500000240000005254711172433105023012 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_logger.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Test_Logger * * $Id: test_logger.t.cpp,v 1.11 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include // test support #include #include #define TEST_COMPONENT_NAME Test_Logger #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; //////////////////////////////////////////////////////////////////////////////// /** * @brief [PRO] fct/abnormal: constructing a Test_Logger with @ref LEVEL_TEST. */ void wrong_build_level(Test_Data & test_data) { Test_Logger::Test_Run_Results_t results; TEST_THROWING_BLOCK_ENTER; Test_Logger logger(LEVEL_TEST,LEVEL_TEST,results); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Logger logger(LEVEL_AUDIT,LEVEL_TEST,results); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Logger logger(LEVEL_TEST,LEVEL_AUDIT,results); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Logger logger(LEVEL_DEBUG,LEVEL_AUDIT,results); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Logger logger(LEVEL_PROD,LEVEL_AUDIT,results); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Logger logger(LEVEL_PROD,LEVEL_DEBUG,results); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } //////////////////////////////////////////////////////////////////////////////// /** * @brief [PRO] fct/normal: constructing a Test_Logger with a correct build-level */ void correct_build_levels(Test_Data & test_data) { Test_Logger::Test_Run_Results_t results; Test_Logger logger1(LEVEL_AUDIT,LEVEL_PROD,results); Test_Logger logger2(LEVEL_DEBUG,LEVEL_PROD,results); Test_Logger logger3(LEVEL_PROD, LEVEL_PROD,results); Test_Logger logger4(LEVEL_AUDIT,LEVEL_DEBUG,results); Test_Logger logger5(LEVEL_DEBUG,LEVEL_DEBUG,results); Test_Logger logger6(LEVEL_AUDIT,LEVEL_AUDIT,results); } //////////////////////////////////////////////////////////////////////////////// /** * @brief [PRO] fct/abnormal: just a plain @ref TYPE_TESTCASE_EXIT -- * produces @ref DIAGNOSTICS_PANIC_LOG */ void record_sequence_plain_exit(Test_Data & test_data) { Test_Logger::Test_Run_Results_t results; Test_Logger logger(LEVEL_AUDIT,LEVEL_AUDIT,results); // passive? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); // no results? TEST_ASSERT(results.size()==0); // TYPE_TESTCASE_EXIT -- INVALID -- causes PANIC LOG logger.log(CSTR_RECORD("panic 1",LEVEL_TEST,TYPE_TESTCASE_EXIT)); // passive? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); // no results? TEST_ASSERT(results.size()==0); } //////////////////////////////////////////////////////////////////////////////// /** * @brief [PRO] fct/abnormal: a @ref TYPE_TESTCASE_ENTER twice -- * produces @ref DIAGNOSTICS_PANIC_LOG */ void record_sequence_double_enter(Test_Data & test_data) { Test_Logger::Test_Run_Results_t results; Test_Logger logger(LEVEL_PROD,LEVEL_PROD,results); // passive? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); // no results? TEST_ASSERT(results.size()==0); // TYPE_TESTCASE_ENTER logger.log(CSTR_RECORD("ok",LEVEL_TEST,TYPE_TESTCASE_ENTER)); // active? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_ACTIVE); // one result? TEST_ASSERT(results.size()==1); // get if for later comparison Test_Run_Result const result(*(results[0])); // result incomplete? TEST_ASSERT(result.abstract_state()==Test_Run_Result::STATE_INCOMPLETE); // TYPE_TESTCASE_ENTER -- INVALID -- causes PANIC LOG logger.log(CSTR_RECORD("panic 2",LEVEL_TEST,TYPE_TESTCASE_ENTER)); // active? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_ACTIVE); // one result? TEST_ASSERT(results.size()==1); // no change in the Test_Run_Result? TEST_ASSERT(*(results[0])==result); } //////////////////////////////////////////////////////////////////////////////// /** * @brief [PRO] fct/normal: a @ref TYPE_TESTCASE_ENTER, a @ref * TYPE_TESTCASE_EXIT and a @ref TYPE_TESTCASE_ENTER */ void record_sequence_enter_exit_enter(Test_Data & test_data) { Test_Logger::Test_Run_Results_t results; Test_Logger logger(LEVEL_AUDIT,LEVEL_AUDIT,results); // passive? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); // no results? TEST_ASSERT(results.size()==0); // TYPE_TESTCASE_ENTER logger.log(CSTR_RECORD("ok",LEVEL_TEST,TYPE_TESTCASE_ENTER)); // active? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_ACTIVE); // one result? TEST_ASSERT(results.size()==1); // result incomplete? TEST_ASSERT(results[0]->abstract_state()==Test_Run_Result::STATE_INCOMPLETE); // TYPE_TESTCASE_EXIT logger.log(CSTR_RECORD("ok",LEVEL_TEST,TYPE_TESTCASE_EXIT)); // passive? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); // one result? TEST_ASSERT(results.size()==1); // result complete? TEST_ASSERT(results[0]->abstract_state()==Test_Run_Result::STATE_COMPLETE); Test_Run_Result const result(*(results[0])); // TYPE_TESTCASE_ENTER logger.log(CSTR_RECORD("ok",LEVEL_TEST,TYPE_TESTCASE_ENTER)); // active? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_ACTIVE); // one result? TEST_ASSERT(results.size()==2); // result incomplete? TEST_ASSERT(results[1]->abstract_state()==Test_Run_Result::STATE_INCOMPLETE); // first result unchanged? TEST_ASSERT(*(results[0])==result); } //////////////////////////////////////////////////////////////////////////////// /** * @brief helper to compare record sequences fed into the logger and * the corresponding result. */ void cmp_records(Test_Run_Result::Records_t const & orig, Test_Run_Result::Records_t const & copy, Level_t const level) { typedef Test_Run_Result::Records_t::const_iterator Const_Iterator_t; Const_Iterator_t cur(orig.begin()); Const_Iterator_t const end(orig.end()); Const_Iterator_t cur2(copy.begin()); Const_Iterator_t const end2(copy.end()); for(;cur!=end;++cur) { if(cur->type()==TYPE_LOG_OPEN) continue; if(cur->type()==TYPE_LOG_CLOSE) continue; if(cur->type()==TYPE_FAILED_ASSERTION) { TEST_ASSERT(*cur==*cur2++); } else if(cur->type()==TYPE_UNEXPECTED_EXCEPTION) { TEST_ASSERT(*cur==*cur2++); } else if(cur->level()==LEVEL_TEST) { TEST_ASSERT(*cur==*cur2++); } else if(cur->type()==TYPE_FAILED_CHECK){ if(cur->level()>level) { TEST_ASSERT(*cur==*cur2++); } } } TEST_ASSERT(cur2==end2); } //////////////////////////////////////////////////////////////////////////////// /** * @brief helper to check the passive state of a Test_Logger * * @arg checks whether the logger is in STATE_PASSIVE and the * results vector has size 1 * @arg sends in all level/type combinations to be ignored in STATE_PASSIVE * @arg checks whether the logger is in STATE_PASSIVE */ void check_passive(Test_Logger & logger) { #define CHECK_PASSIVE_LOGGING_I(TYPE) do { \ logger.log(CSTR_RECORD("ignored",LEVEL_PROD,TYPE)); \ TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); \ logger.log(CSTR_RECORD("ignored",LEVEL_DEBUG,TYPE)); \ TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); \ logger.log(CSTR_RECORD("ignored",LEVEL_AUDIT,TYPE)); \ TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); \ logger.log(CSTR_RECORD("ignored",LEVEL_TEST,TYPE)); \ TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); } while(false) #define CHECK_PASSIVE_LOGGING do {\ CHECK_PASSIVE_LOGGING_I(TYPE_BLOCK_ENTER); \ CHECK_PASSIVE_LOGGING_I(TYPE_BLOCK_EXIT); \ CHECK_PASSIVE_LOGGING_I(TYPE_PROCEDURE_ENTER); \ CHECK_PASSIVE_LOGGING_I(TYPE_PROCEDURE_EXIT); \ CHECK_PASSIVE_LOGGING_I(TYPE_METHOD_ENTER); \ CHECK_PASSIVE_LOGGING_I(TYPE_METHOD_EXIT); \ CHECK_PASSIVE_LOGGING_I(TYPE_TRACE); \ CHECK_PASSIVE_LOGGING_I(TYPE_TRACE_BINARY); \ CHECK_PASSIVE_LOGGING_I(TYPE_FAILED_CHECK); \ CHECK_PASSIVE_LOGGING_I(TYPE_UNEXPECTED_EXCEPTION); \ CHECK_PASSIVE_LOGGING_I(TYPE_WRONG_EXCEPTION); \ CHECK_PASSIVE_LOGGING_I(TYPE_MISSING_EXCEPTION); \ CHECK_PASSIVE_LOGGING_I(TYPE_LOG_OPEN); \ CHECK_PASSIVE_LOGGING_I(TYPE_LOG_CLOSE); } while(false) // passive? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); // check the passive behavior CHECK_PASSIVE_LOGGING; // still passive? TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); #undef CHECK_PASSIVE_LOGGING #undef CHECK_PASSIVE_LOGGING_I } //////////////////////////////////////////////////////////////////////////////// /** * @brief [PRO] fct/normal: correct traces and their evaluation. Note * that this test is only checking with traces that contain a single * execution. * * The given Record_Vector class must produce a single Test_Case * execution, starting with an @ref TYPE_TESTCASE_ENTER and ending * with a @ref TYPE_TESTCASE_EXIT. The following steps are executed * for target_level in {LEVEL_PROD, LEVEL_DEBUG, LEVEL_AUDIT) * * @arg A constructs a logger with build_level==LEVEL_AUDIT * target_level and an empty results vector (check whether the vector * remains empty) * @arg B check_passive * @arg C logs the original records except the last one and checks after * each logged record whether the logger is in STATE_ACTIVE * @arg D logs the last record and check for STATE_PASSIVE and the results vector has size 1 * @arg E checks the records in the result -- whether the right subset * has been logged or not. * @arg F checks the derived state of the @ref Test_Run_Result and for * current build-level in the Test_Run_Result * @arg B (since the execution is finished by copying the last record) * @arg E-F (since B-D could have changed the state) * @arg G check whether there is exactly one result * @arg H close logger * @arg G * @arg E-F */ class Correct_Trace_Processing { Record_Vector * const m_record_vector; public: typedef Test_Run_Result::Records_t Records_t; typedef Records_t::const_iterator Const_Iterator_t; Correct_Trace_Processing(Record_Vector * const r) : m_record_vector(r) { } Correct_Trace_Processing(Correct_Trace_Processing const & other) : m_record_vector(other.m_record_vector->clone()) { } ~Correct_Trace_Processing() { delete m_record_vector; } void operator()(Test_Data & test_data) const; private: void feed(Records_t const & orig,Test_Data & test_data,Level_t const target_level) const; }; void Correct_Trace_Processing::operator()(Test_Data & test_data) const { Records_t const records(m_record_vector->records()); feed(records,test_data,LEVEL_PROD); feed(records,test_data,LEVEL_DEBUG); feed(records,test_data,LEVEL_AUDIT); } void Correct_Trace_Processing::feed(Records_t const & orig,Test_Data & test_data,Level_t const target_level) const { Test_Logger::Test_Run_Results_t results; // A constructs a logger with LEVEL_AUDIT and an empty results vector // (check whether the vector remains empty) Test_Logger logger(LEVEL_AUDIT,target_level,results); TEST_ASSERT(results.size()==0); // B check_passive check_passive(logger); // C logs the original records except the last one and checks after // each logged record whether the logger is in STATE_ACTIVE and the // results vector has size 1 Const_Iterator_t cur(orig.begin()); Const_Iterator_t const end(orig.end()-1); for(;cur!=end;++cur) { logger.log(*cur); // check incomplete state TEST_ASSERT(results.size()==1); TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_ACTIVE); } // D logs the last record and check for STATE_PASSIVE and the results vector has size 1 logger.log(*cur); TEST_ASSERT(results.size()==1); TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_PASSIVE); // E checks the records in the result -- whether the right subset // has been logged or not. cmp_records(orig,results[0]->records(),target_level); // F checks the derived state of the @ref Test_Run_Result and for // LEVEL_AUDIT in the Test_Run_Result m_record_vector->check(*(results[0]),true,target_level); TEST_ASSERT(results[0]->build_level()==LEVEL_AUDIT); // B check_passive(logger); // E cmp_records(orig,results[0]->records(),target_level); // F m_record_vector->check(*(results[0]),true,target_level); TEST_ASSERT(results[0]->build_level()==LEVEL_AUDIT); // G check whether there is exactly one result TEST_ASSERT(results.size()==1); // H close logger logger.close(); // G TEST_ASSERT(results.size()==1); // E cmp_records(orig,results[0]->records(),target_level); // F m_record_vector->check(*(results[0]),true,target_level); TEST_ASSERT(results[0]->build_level()==LEVEL_AUDIT); } //////////////////////////////////////////////////////////////////////////////// /** * @brief [PRO] fct/normal: multiple correct traces and their * evaluation. 8 traces are fed into a single logger and their * evaluation is checked. * * * The following sequence is repeated for each build-level and for * each tested Record_Vector -- for each valid * build-level/target-level combination a new Test_Logger is used -- * the same Test_Run_Result vector is used all the time. * * @arg A check whether logger is passive check_passive(logger); * @arg B logs the original records except the last one and checks after * each logged record whether the logger is in STATE_ACTIVE and the * results vector has original size+1 * @arg C logs the last record and checks that the results vector has original size+1 * @arg A check_passive * @arg D checks the records in the result -- whether the right subset * has been logged or not. * @arg E checks the derived state of the @ref Test_Run_Result and for * LEVEL_DEBUG in the Test_Run_Result * * Finally, the number of results is checked for. */ class Multiple_Traces_Processing { public: typedef Test_Logger::Test_Run_Results_t Test_Run_Results_t; typedef Test_Run_Result::Records_t Records_t; typedef Records_t::const_iterator Const_Iterator_t; Multiple_Traces_Processing() { } void operator()(Test_Data & test_data) const; private: void feed(Test_Run_Results_t & results, Test_Logger &logger, Record_Vector & orig_rv, Test_Data & test_data, Level_t const build_level, Level_t const target_level) const; }; void Multiple_Traces_Processing::operator()(Test_Data & test_data) const { Test_Logger::Test_Run_Results_t results; typedef ::std::vector RV_t; typedef RV_t::const_iterator RV_Iter_t; RV_t rvs; rvs.push_back(new Empty_Trace_0sec_0usec()); rvs.push_back(new Empty_Trace_1sec_1usec_No_Carry()); rvs.push_back(new Empty_Trace_1sec_1usec_With_Carry()); rvs.push_back(new Trace_With_One_Failure()); rvs.push_back(new Trace_With_One_Invalidation()); rvs.push_back(new Trace_With_One_Failed_Check()); rvs.push_back(new Trace_With_All_Level_Type_Combinations()); rvs.push_back(new Trace_With_All_Level_Type_Combinations_Times_2()); RV_Iter_t cur(rvs.begin()); RV_Iter_t const end(rvs.end()); TEST_ASSERT(results.size()==0); Test_Logger logger(LEVEL_PROD,LEVEL_PROD,results); TEST_ASSERT(results.size()==0); for(;cur!=end;++cur) feed(results,logger,**cur,test_data,LEVEL_PROD,LEVEL_PROD); TEST_ASSERT(results.size()==8); Test_Logger logger2(LEVEL_DEBUG,LEVEL_PROD,results); TEST_ASSERT(results.size()==8); for(cur=rvs.begin();cur!=end;++cur) feed(results,logger2,**cur,test_data,LEVEL_DEBUG,LEVEL_PROD); TEST_ASSERT(results.size()==16); Test_Logger logger3(LEVEL_DEBUG,LEVEL_DEBUG,results); TEST_ASSERT(results.size()==16); for(cur=rvs.begin();cur!=end;++cur) feed(results,logger3,**cur,test_data,LEVEL_DEBUG,LEVEL_DEBUG); TEST_ASSERT(results.size()==24); Test_Logger logger4(LEVEL_AUDIT,LEVEL_AUDIT,results); TEST_ASSERT(results.size()==24); for(cur=rvs.begin();cur!=end;++cur) feed(results,logger4,**cur,test_data,LEVEL_AUDIT,LEVEL_AUDIT); TEST_ASSERT(results.size()==32); Test_Logger logger5(LEVEL_AUDIT,LEVEL_DEBUG,results); TEST_ASSERT(results.size()==32); for(cur=rvs.begin();cur!=end;++cur) feed(results,logger5,**cur,test_data,LEVEL_AUDIT,LEVEL_DEBUG); TEST_ASSERT(results.size()==40); Test_Logger logger6(LEVEL_AUDIT,LEVEL_PROD,results); TEST_ASSERT(results.size()==40); for(cur=rvs.begin();cur!=end;++cur) feed(results,logger6,**cur,test_data,LEVEL_AUDIT,LEVEL_PROD); TEST_ASSERT(results.size()==48); } void Multiple_Traces_Processing::feed(Test_Run_Results_t & results, Test_Logger &logger, Record_Vector & orig_rv, Test_Data & test_data, Level_t const build_level, Level_t const target_level) const { Records_t orig(orig_rv.records()); // store size int const size(results.size()); // A check whether logger is passive check_passive(logger); // B logs the original records except the last one and checks after // each logged record whether the logger is in STATE_ACTIVE and the // results vector has original size+1 Const_Iterator_t cur(orig.begin()); Const_Iterator_t const end(orig.end()-1); for(;cur!=end;++cur) { logger.log(*cur); // check incomplete state TEST_ASSERT(static_cast(results.size())==size+1); TEST_ASSERT(logger.abstract_state()==Test_Logger::STATE_ACTIVE); } // C logs the last record and checks that the results vector has original size+1 logger.log(*cur); TEST_ASSERT(static_cast(results.size())==size+1); // A check_passive check_passive(logger); // D checks the records in the result -- whether the right subset // has been logged or not. cmp_records(orig,results[size]->records(),target_level); // E checks the derived state of the @ref Test_Run_Result and for // build_level in the Test_Run_Result orig_rv.check(*(results[size]),true,target_level); TEST_ASSERT(results[size]->build_level()==build_level); } /** * @brief [PRO] impl: The implementation for deciding whether to log * a TYPE_FAILED_CHECK breaks down if the following two assertions are * not met. */ void level_odering(Test_Data &) { TEST_ASSERT(LEVEL_PROD, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_run_result.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::Test_Run_Result class * * $Id: test_run_result.cpp,v 1.13 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include UNNAMED_NAMESPACE_BEGIN; void check_levels(::diagnostics::Level_t const build_level, ::diagnostics::Level_t const target_level) { using namespace diagnostics; using namespace unittest; if(build_level==LEVEL_TEST) throw Test_System_Exception("LEVEL_TEST is not a valid build level"); if(target_level==LEVEL_TEST) throw Test_System_Exception("LEVEL_TEST is not a valid target level"); if(build_level==LEVEL_SYSTEM) throw Test_System_Exception("LEVEL_SYSTEM is not a valid build level"); if(target_level==LEVEL_SYSTEM) throw Test_System_Exception("LEVEL_SYSTEM is not a valid target level"); if(target_level>build_level) throw Test_System_Exception("Build_Level must greater or equal than the target_level"); } UNNAMED_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Run_Result::Test_Run_Result(Level_t const build_level, Level_t const target_level, Records_t const & records) : m_abstract_state(STATE_EMPTY), m_failure_count(0), m_invalidation_count(0), m_build_level(build_level), m_target_level(target_level), m_records() #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , m_sec(0), m_usec(0) #endif { check_levels(m_build_level,m_target_level); Records_t::const_iterator cur(records.begin()); Records_t::const_iterator const end(records.end()); for(;cur!=end;++cur) add_record(*cur); } Test_Run_Result::Test_Run_Result(Level_t const build_level, Level_t const target_level) : m_abstract_state(STATE_EMPTY), m_failure_count(0), m_invalidation_count(0), m_build_level(build_level), m_target_level(target_level), m_records() #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , m_sec(0), m_usec(0) #endif { check_levels(m_build_level,m_target_level); } Test_Run_Result::Test_Run_Result(Self const & other) : m_abstract_state(other.m_abstract_state), m_failure_count(other.m_failure_count), m_invalidation_count(other.m_invalidation_count), m_build_level(other.m_build_level), m_target_level(other.m_target_level), m_records(other.m_records) #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , m_sec(other.m_sec), m_usec(other.m_usec) #endif { } Test_Run_Result & Test_Run_Result::operator=(Self const & other) { m_abstract_state=other.m_abstract_state; m_failure_count=other.m_failure_count; m_invalidation_count=other.m_invalidation_count; m_build_level=other.m_build_level; m_target_level=other.m_target_level; m_records=other.m_records; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 m_sec=other.m_sec; m_usec=other.m_usec; #endif return *this; } bool Test_Run_Result::operator==(Self const & other) const { return m_build_level==other.m_build_level && m_target_level==other.m_target_level && m_records==other.m_records; // all other fields can be derived from these three fields } void Test_Run_Result::add_record(Record const & record) { using ::diagnostics::internal::to_string; if(record.level()==LEVEL_SYSTEM) return; switch(record.type()){ case TYPE_TESTCASE_ENTER: if(m_abstract_state==STATE_EMPTY) { m_records.push_back(record); m_abstract_state=STATE_INCOMPLETE; } else throw Test_System_Exception("Recursive Test_Case: " + to_string(record)); break; case TYPE_TESTCASE_EXIT: if(m_abstract_state==STATE_INCOMPLETE) { m_records.push_back(record); m_abstract_state=STATE_COMPLETE; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 m_sec=record.sec(); m_usec=record.usec(); if(m_usec>=m_records[0].usec()) { m_sec-=m_records[0].sec(); m_usec-=m_records[0].usec(); } else { m_sec-=m_records[0].sec()+1; m_usec=1000*1000-m_records[0].usec()+m_usec; } #endif } else if(m_abstract_state==STATE_EMPTY) throw Test_System_Exception("Trace empty" + to_string(record)); else throw Test_System_Exception("Trace already complete " + to_string(record)); break; case TYPE_FAILED_CHECK: if(m_abstract_state==STATE_INCOMPLETE) { m_records.push_back(record); if(record.level()==LEVEL_TEST) ++m_invalidation_count; else if(record.level()>m_target_level) ++m_failure_count; } else if(m_abstract_state==STATE_EMPTY) throw Test_System_Exception("Trace empty" + to_string(record)); else throw Test_System_Exception("Trace already complete " + to_string(record)); break; case TYPE_FAILED_ASSERTION: case TYPE_UNEXPECTED_EXCEPTION: if(m_abstract_state==STATE_INCOMPLETE) { m_records.push_back(record); ++m_failure_count; } else if(m_abstract_state==STATE_EMPTY) throw Test_System_Exception("Trace empty" + to_string(record)); else throw Test_System_Exception("Trace already complete " + to_string(record)); break; case TYPE_WRONG_EXCEPTION: case TYPE_MISSING_EXCEPTION: if(m_abstract_state==STATE_INCOMPLETE) { m_records.push_back(record); if(record.level()==LEVEL_TEST) ++m_failure_count; } else if(m_abstract_state==STATE_EMPTY) throw Test_System_Exception("Trace empty" + to_string(record)); else throw Test_System_Exception("Trace already complete " + to_string(record)); break; case TYPE_TRACE_BINARY: case TYPE_TRACE: case TYPE_METHOD_ENTER: case TYPE_BLOCK_ENTER: case TYPE_PROCEDURE_ENTER: case TYPE_PROCEDURE_EXIT: case TYPE_BLOCK_EXIT: case TYPE_METHOD_EXIT: if(m_abstract_state==STATE_INCOMPLETE) m_records.push_back(record); else if(m_abstract_state==STATE_EMPTY) throw Test_System_Exception("Trace empty" + to_string(record)); else throw Test_System_Exception("Trace already complete " + to_string(record)); break; case TYPE_LOG_OPEN: case TYPE_LOG_CLOSE: break; } } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; ::std::ostream & operator<<(::std::ostream & stream, ::diagnostics::unittest::Test_Run_Result const & r) { using namespace diagnostics; using namespace unittest; if(r.abstract_state()==Test_Run_Result::STATE_EMPTY) return stream << "Test_Run_Result: STATE_EMPTY (build: " << level_to_string(r.build_level()) << " target: " << level_to_string(r.target_level()) << ")\n"; typedef Test_Run_Result::Records_t Records_t; Records_t const & records(r.records()); Records_t::const_iterator cur_rec(records.begin()); Records_t::const_iterator const end_rec(records.end()); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 stream << "Test_Run_Result [" << cur_rec->hostname() << " " << cur_rec->pid() << "/" << cur_rec->tid() << "]: " << cur_rec->str_what() << " (build: " << level_to_string(r.build_level()) << " target: " << level_to_string(r.target_level()); if(r.abstract_state()==Test_Run_Result::STATE_COMPLETE) { stream << ") in "; /** * @todo couldn't get fixed -- I have to look up the lib source */ stream.setf(::std::ostream::fixed, ::std::ostream::floatfield) ; stream << (r.sec() + r.usec()/1000000.0); stream.setf(::std::ostream::fmtflags(0), ::std::ostream::floatfield) ; stream << " secs\n"; } else stream << ") STATE_INCOMPLETE\n"; #else stream << "Test_Run_Result: " << cur_rec->str_what() << " (build: " << level_to_string(r.build_level()) << " target: " << level_to_string(r.target_level()) << (r.abstract_state()==Test_Run_Result::STATE_COMPLETE ? ")\n" : ") STATE_INCOMPLETE\n"); #endif int indentation(2); for(++cur_rec;cur_rec!=end_rec;++cur_rec){ switch(cur_rec->type()){ case TYPE_TESTCASE_ENTER: stream << "TESTCASE: " << cur_rec->str_what() << '\n'; break; case TYPE_TESTCASE_EXIT: if(r.invalidation_count()!=0) { stream << "INVALID: " << r.invalidation_count() << " invalidation(s) counted (" << r.failure_count() << " failure(s) occured, too)\n\n"; } else if(r.failure_count()!=0) { stream << "FAILED: " << r.failure_count() << " failure(s) counted.\n\n"; } else stream << "SUCCEEDED\n\n"; break; case TYPE_FAILED_CHECK: for(int i=0;ilevel()==LEVEL_TEST ? "FAILED_CHECK (INVALIDATION) [" : (cur_rec->level()>r.target_level() ? "FAILED CHECK (FAILURE) [" : "failed_check [")) << level_to_string(cur_rec->level()) << "]: " << cur_rec->str_what() << " [" << cur_rec->base_file_name() << " " << cur_rec->file_name() << " " << cur_rec->line() << "]\n"; break; case TYPE_FAILED_ASSERTION: for(int i=0;ilevel()) << "]: " << cur_rec->str_what() << " [" << cur_rec->base_file_name() << " " << cur_rec->file_name() << " " << cur_rec->line() << "]\n"; break; case TYPE_UNEXPECTED_EXCEPTION: for(int i=0;ilevel()) << "]: " << cur_rec->str_what() << " [" << cur_rec->base_file_name() << " " << cur_rec->file_name() << " " << cur_rec->line() << "]\n"; break; case TYPE_WRONG_EXCEPTION: for(int i=0;ilevel()==LEVEL_TEST ? "WRONG_EXCEPTION [": "wrong_exception [") << level_to_string(cur_rec->level()) << "]: " << cur_rec->str_what() << " [" << cur_rec->base_file_name() << " " << cur_rec->file_name() << " " << cur_rec->line() << "]\n"; break; case TYPE_MISSING_EXCEPTION: for(int i=0;ilevel()==LEVEL_TEST ? "MISSING_EXCEPTION [": "missing_exception [") << level_to_string(cur_rec->level()) << "]: " << cur_rec->str_what() << " [" << cur_rec->base_file_name() << " " << cur_rec->file_name() << " " << cur_rec->line() << "]\n"; break; case TYPE_TRACE_BINARY: for(int i=0;ilevel()) << "]\n"; break; case TYPE_TRACE: for(int i=0;ilevel()) << "]: " << cur_rec->str_what() << '\n'; break; case TYPE_METHOD_ENTER: case TYPE_BLOCK_ENTER: case TYPE_PROCEDURE_ENTER: for(int i=0;itype()) << " [" << level_to_string(cur_rec->level()) << "]: " << cur_rec->str_what() << '\n'; indentation+=2; break; case TYPE_PROCEDURE_EXIT: case TYPE_BLOCK_EXIT: case TYPE_METHOD_EXIT: indentation-=2; for(int i=0;itype()) << " [" << level_to_string(cur_rec->level()) << "]: " << cur_rec->str_what() << '\n'; break; case TYPE_LOG_OPEN: case TYPE_LOG_CLOSE: break; } // swtich } // records return stream; } // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_run_result.hpp0000644000076500000240000002377711172433105023503 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_run_result.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_Run_Result * class * * $Id: test_run_result.hpp,v 1.20 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/test_run_result.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_RUN_RESULT_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_RUN_RESULT_HPP__INCLUDE_GUARD #include // used in the interface by reference // used in the implementation by value #include // used in the interface by reference #include // used in the interface by reference // used in the implementation by value #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Test_Run_Result diagnostics/unittest/test_system/test_run_result.hpp * * @brief a Test_Run_Result represents the data on a single run of a * single Test_Case generated by a @ref Run_Test_Suite_Traversal. * This class embodies the testing policy, i.e., which execution of a * @ref Test_Case is considered successful, failed or invalid. * * @nosubgrouping */ class Test_Run_Result { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Test_Run_Result Self; public: /** * @brief the state of the result... */ typedef enum { /** * @brief no records are there, i.e., records().size()==0 */ STATE_EMPTY, /** * @brief records are there -- but the TYPE_TESTCASE_EXIT is missing */ STATE_INCOMPLETE, /** * @brief a complete execution execution trace is stored in this */ STATE_COMPLETE } Abstract_state_t; typedef ::std::vector Records_t; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Disabled Creation * @{ */ private: Test_Run_Result(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief Cstr starting with @ref STATE_EMPTY * * @throw Test_System_Exception if the precondition is not met * * @pre @a build_level != @ref LEVEL_TEST * @pre @a target_level != @ref LEVEL_TEST * @pre @a build_level != @ref LEVEL_SYSTEM * @pre @a target_level != @ref LEVEL_SYSTEM * @pre @a target_level <= build_level * * @post build_level() == @a build_level * @post target_level() == @a target_level * @post abstract_state() == @ref STATE_EMPTY */ Test_Run_Result(Level_t const build_level, Level_t const target_level); /** * @brief to build a Test_Run_Result from scratch * * @throw Test_System_Exception if the preconditions are not met * * @pre @a build_level != @ref LEVEL_TEST * @pre @a target_level != @ref LEVEL_TEST * @pre @a build_level != @ref LEVEL_SYSTEM * @pre @a target_level != @ref LEVEL_SYSTEM * @pre @a target_level <= build_level * @pre @a records is valid the sense that copying record by * record from the beginning to end with add_record succeeds. * * @post build_level() == @a build_level * @post target_level() == @a target_level * @post records() == @a records * @post all other fields are set according to records(). */ Test_Run_Result(Level_t const build_level, Level_t const target_level, Records_t const & records); /** * @throw never */ Test_Run_Result(Self const & other); /** * @throw never */ Self & operator=(Self const & other); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Comparision * @{ */ public: /** * @throw never */ bool operator==(Self const & r) const; /** * @throw never */ inline bool operator!=(Self const & r) const { return !operator==(r); } // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Accessors * @{ */ public: /** * @brief the build level of the executed @ref Test_Case * * @throw never */ inline Level_t build_level() const { return m_build_level; } /** * @brief the target level of the executed @ref Test_Case * * @throw never */ inline Level_t target_level() const { return m_target_level; } /** * @brief whether there occured invalidations, i.e., whether it * could be executed in a conclusive way yielding a failure or * success (e.g., an execution of a @ref Test_Case is invalid, if * it could access files it would have required). * * @throw never */ inline int invalidation_count() const { return m_invalidation_count; } /** * @brief the number of failures which occured during the * execution of the @ref Test_Case. * * @throw never */ inline int failure_count() const { return m_failure_count; } /** * @brief returns the current abstract_state * * @throw never */ inline Abstract_state_t abstract_state() const { return m_abstract_state; } /** * @brief the records which were collected during the execution of * the @ref Test_Case. * * @throw never */ inline Records_t const & records() const { return m_records; } #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 /** * @brief the runtime of the execution (seconds) -- only defined * if abstract_state() == @ref STATE_COMPLETE * * @throw never */ inline Sec_t sec() const { return m_sec; } /** * @brief the runtime of the execution (microseconds) -- only * defined if abstract_state() == @ref STATE_COMPLETE * * @throw never */ inline Usec_t usec() const { return m_usec; } #endif // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: /** * @brief adds a @ref Record to the sequence of @ref records(). * * @throw Test_System_Exception if the new record is not a valid * continuation of the @ref records(), i.e., if one of the * preconditions is not met. * * @attention records of @ref TYPE_LOG_OPEN, @ref TYPE_LOG_CLOSE * and of @ref LEVEL_SYSTEM are completely ignored! * * For all OTHER types, the following rules apply: * * @pre abstract_state () == @ref STATE_EMPTY <--> @a record.type() == @ref TYPE_TESTCASE_ENTER * @pre @a record.type() != @ref TYPE_TESTCASE_ENTER --> abstract_state() == @ref STATE_INCOMPLETE * * @post PRE.records().push_back(@a record) == POST.records() * @post @a record.type() == @ref TYPE_TESTCASE_ENTER --> POST.abstract_state() == @ref STATE_INCOMPLETE * @post @a record.type() == @ref TYPE_TESTCASE_EXIT --> POST.abstract_state() == @ref STATE_COMPLETE * @post @a record.type() == @ref TYPE_FAILED_ASSERTION --> PRE.failure_count()+1 == POST.failure_count() * @post @a record.type() == @ref TYPE_UNEXPECTED_EXCEPTION --> PRE.failure_count()+1 == POST.failure_count() * @post @a record.type() == @ref TYPE_FAILED_CHECK && @a record.level() == @ref LEVEL_TEST --> * PRE.invalidation_count()+1 == POST.invalidation_count() * @post @a record.type() == @ref TYPE_WRONG_EXCEPTION && @a record.level() == @ref LEVEL_TEST --> * PRE.failure_count()+1 == POST.failure_count() * @post @a record.type() == @ref TYPE_WRONG_EXCEPTION && @a record.level() == @ref LEVEL_TEST --> * PRE.failure_count()+1 == POST.failure_count() * @post @a record.type() == @ref TYPE_FAILED_CHECK && @a record.level() > target_level() * && @a record.level() != @ref LEVEL_TEST --> * PRE.failure_count()+1 == POST.failure_count() */ void add_record(Record const & record); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated State * @{ */ private: Abstract_state_t m_abstract_state; int m_failure_count; int m_invalidation_count; Level_t m_build_level; Level_t m_target_level; Records_t m_records; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 Sec_t m_sec; Usec_t m_usec; #endif // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; /** * @brief prints a @ref diagnostics::unittest::Test_Run_Result into an stream (multiline * output, tailing newline added) */ ::std::ostream & operator<<(::std::ostream & stream, ::diagnostics::unittest::Test_Run_Result const & r); #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_run_result.t.cpp0000644000076500000240000005677111172433105023740 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_run_result.t.cpp * * @brief [LEVEL: beta] testing @ref diagnostics::unittest::Test_Run_Result * * $Id: test_run_result.t.cpp,v 1.18 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart * * @todo add a sane comparison test */ #include // used components #include #include #include // test support #include #include #include #include #define TEST_COMPONENT_NAME Test_Run_Result #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; /** * @brief [PRO] fct/abnormal: invalid build_level and target_level, with NO records */ void invalid_cstr(Test_Data & test_data) { typedef Test_Run_Result::Records_t Records_t; // LEVEL_TEST TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_TEST,LEVEL_DEBUG); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_DEBUG,LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_TEST,LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // LEVEL_SYSTEM TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_SYSTEM,LEVEL_DEBUG); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_DEBUG,LEVEL_SYSTEM); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_SYSTEM,LEVEL_SYSTEM); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // lower build_level than target_level TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_PROD,LEVEL_DEBUG); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_PROD,LEVEL_AUDIT); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_DEBUG,LEVEL_AUDIT); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // LEVEL_TEST TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_TEST,LEVEL_DEBUG,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_DEBUG,LEVEL_TEST,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_TEST,LEVEL_TEST,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // LEVEL_TEST TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_SYSTEM,LEVEL_DEBUG,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_DEBUG,LEVEL_SYSTEM,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_SYSTEM,LEVEL_SYSTEM,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // lower build_level than target_level TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_PROD,LEVEL_DEBUG,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_PROD,LEVEL_AUDIT,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; Test_Run_Result r1(LEVEL_DEBUG,LEVEL_AUDIT,Records_t()); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } /** * @brief [PRO] fct/normal: all cstrs, assignment, comparision, with NO records */ void cstr_copy_assign_compare_recordless(Test_Data & test_data) { using ::diagnostics::internal::to_string; typedef Test_Run_Result::Records_t Records_t; // Test_Run_Result(Level_t,Level_t) Test_Run_Result r1(LEVEL_PROD,LEVEL_PROD); TEST_ASSERT(r1.build_level()==LEVEL_PROD); TEST_ASSERT(r1.target_level()==LEVEL_PROD); TEST_ASSERT(r1.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(r1.failure_count()==0); TEST_ASSERT(r1.invalidation_count()==0); TEST_ASSERT(r1.records().size()==0); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r1))); // self cmp and assign TEST_ASSERT(r1==r1); r1=r1; TEST_ASSERT(r1.build_level()==LEVEL_PROD); TEST_ASSERT(r1.target_level()==LEVEL_PROD); TEST_ASSERT(r1.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(r1.failure_count()==0); TEST_ASSERT(r1.invalidation_count()==0); TEST_ASSERT(r1.records().size()==0); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r1))); // Test_Run_Result(Level_t,Level_t) Test_Run_Result r2(LEVEL_DEBUG,LEVEL_PROD); TEST_ASSERT(r2.build_level()==LEVEL_DEBUG); TEST_ASSERT(r2.target_level()==LEVEL_PROD); TEST_ASSERT(r2.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(r2.failure_count()==0); TEST_ASSERT(r2.invalidation_count()==0); TEST_ASSERT(r2.records().size()==0); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r2",to_string(r2))); // self cmp and assign TEST_ASSERT(r2==r2); r2=r2; TEST_ASSERT(r2.build_level()==LEVEL_DEBUG); TEST_ASSERT(r2.target_level()==LEVEL_PROD); TEST_ASSERT(r2.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(r2.failure_count()==0); TEST_ASSERT(r2.invalidation_count()==0); TEST_ASSERT(r2.records().size()==0); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r2",to_string(r2))); TEST_ASSERT(r1!=r2); // Test_Run_Result(level,records) Test_Run_Result r3(LEVEL_AUDIT,LEVEL_DEBUG,Records_t()); TEST_ASSERT(r3.build_level()==LEVEL_AUDIT); TEST_ASSERT(r3.target_level()==LEVEL_DEBUG); TEST_ASSERT(r3.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(r3.failure_count()==0); TEST_ASSERT(r3.invalidation_count()==0); TEST_ASSERT(r3.records().size()==0); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r3",to_string(r3))); // self cmp and assign TEST_ASSERT(r3==r3); r3=r3; TEST_ASSERT(r3.build_level()==LEVEL_AUDIT); TEST_ASSERT(r3.target_level()==LEVEL_DEBUG); TEST_ASSERT(r3.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(r3.failure_count()==0); TEST_ASSERT(r3.invalidation_count()==0); TEST_ASSERT(r3.records().size()==0); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r3",to_string(r3))); TEST_ASSERT(r1!=r3); TEST_ASSERT(r2!=r3); // copy constr Test_Run_Result r4(r3); TEST_ASSERT(r4.build_level()==LEVEL_AUDIT); TEST_ASSERT(r4.target_level()==LEVEL_DEBUG); TEST_ASSERT(r4.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(r4.failure_count()==0); TEST_ASSERT(r4.invalidation_count()==0); TEST_ASSERT(r4.records().size()==0); TEST_ASSERT(r4==r3); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r3",to_string(r4))); // assign TEST_ASSERT(r1!=r3); r1=r3; TEST_ASSERT(r1==r3); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r3",to_string(r1))); } /** * @brief [PRO] fct/normal: cstrs with records, assignment, comparision, with records */ void cstr_copy_assign_compare_with_records(Test_Data & test_data) { using ::diagnostics::internal::to_string; typedef Test_Run_Result::Records_t Records_t; // Test_Run_Result(level,records) Test_Run_Result r0(LEVEL_PROD,LEVEL_PROD,Empty_Trace_1sec_1usec_No_Carry().records()); TEST_ASSERT(r0.build_level()==LEVEL_PROD); TEST_ASSERT(r0.target_level()==LEVEL_PROD); Empty_Trace_1sec_1usec_No_Carry().check(r0,false,LEVEL_PROD); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r0",to_string(r0))); // self cmp and assign TEST_ASSERT(r0==r0); r0=r0; TEST_ASSERT(r0.build_level()==LEVEL_PROD); TEST_ASSERT(r0.target_level()==LEVEL_PROD); Empty_Trace_1sec_1usec_No_Carry().check(r0,false,LEVEL_PROD); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r0",to_string(r0))); // Test_Run_Result(level,records) Test_Run_Result r1(LEVEL_AUDIT,LEVEL_DEBUG,Empty_Trace_0sec_0usec().records()); TEST_ASSERT(r1.build_level()==LEVEL_AUDIT); TEST_ASSERT(r1.target_level()==LEVEL_DEBUG); Empty_Trace_0sec_0usec().check(r1,false,LEVEL_DEBUG); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r1))); // self cmp and assign TEST_ASSERT(r1==r1); r1=r1; TEST_ASSERT(r1.build_level()==LEVEL_AUDIT); TEST_ASSERT(r1.target_level()==LEVEL_DEBUG); Empty_Trace_0sec_0usec().check(r1,false,LEVEL_DEBUG); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r1))); // copy constr Test_Run_Result r2(r1); TEST_ASSERT(r2.build_level()==LEVEL_AUDIT); TEST_ASSERT(r2.target_level()==LEVEL_DEBUG); Empty_Trace_0sec_0usec().check(r2,false,LEVEL_DEBUG); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r2))); TEST_ASSERT(r2==r2); TEST_ASSERT(r1==r2); // assign Test_Run_Result r3(LEVEL_DEBUG,LEVEL_DEBUG); TEST_ASSERT(r3!=r2); r3=r2; TEST_ASSERT(r2==r3); Empty_Trace_0sec_0usec().check(r3,false,LEVEL_DEBUG); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r1",to_string(r3))); // different level, different records... TEST_ASSERT(r0.records()!=r1.records()); TEST_ASSERT(r0.build_level()!=r1.build_level()); TEST_ASSERT(r0!=r1); TEST_ASSERT(r0!=r3); r3=r0; TEST_ASSERT(r0==r3); TEST_ASSERT(test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"r0",to_string(r3))); Empty_Trace_1sec_1usec_No_Carry().check(r3,false,LEVEL_PROD); } /** * @brief [PRO] fct/normal: correct traces and their evaluation * * Copies the vector of Records m_record_vector->records() as a whole * and pice by pice. Checks in both cases operator<<, whether the * right set of Records has been copied, whether the final result is * correct (m_record_vector->check), and whether it is impossible to * prolong the sequence after the closing of the Test_Case. The whole * test is repeated for all three possible target_levels. * * Checks again the copy cstr and assignment. */ class Correct_Trace_Processing { Record_Vector * const m_record_vector; public: typedef Test_Run_Result::Records_t Records_t; typedef Records_t::const_iterator Const_Iterator_t; Correct_Trace_Processing(Record_Vector * const r) : m_record_vector(r) { } Correct_Trace_Processing(Correct_Trace_Processing const & other) : m_record_vector(other.m_record_vector->clone()) { } ~Correct_Trace_Processing() { delete m_record_vector; } void operator()(Test_Data & test_data) const; private: void copy_as_whole(Records_t const & orig,Test_Data & test_data,Level_t const target_level) const; void manual_copy(Records_t const & orig,Test_Data & test_data,Level_t const target_level) const; void check_impossible_adding(Type_t const type, Test_Run_Result & result) const; void cmp_records_and_completion(Records_t const & orig, Test_Run_Result & result) const; void cmp_records(Records_t const & orig, Records_t const & copy) const; }; void Correct_Trace_Processing::operator()(Test_Data & test_data) const { Records_t const records(m_record_vector->records()); copy_as_whole(records,test_data,LEVEL_AUDIT); manual_copy(records,test_data,LEVEL_AUDIT); copy_as_whole(records,test_data,LEVEL_DEBUG); manual_copy(records,test_data,LEVEL_DEBUG); copy_as_whole(records,test_data,LEVEL_PROD); manual_copy(records,test_data,LEVEL_PROD); } void Correct_Trace_Processing::copy_as_whole(Records_t const & orig,Test_Data & test_data,Level_t const target_level) const { // copy as whole here Test_Run_Result result(LEVEL_AUDIT,target_level,orig); // check the level TEST_ASSERT(result.build_level()==LEVEL_AUDIT); TEST_ASSERT(result.target_level()==target_level); // check the operator<< TEST_ASSERT( test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"result-" + ::std::string(level_to_string(target_level)), ::diagnostics::internal::to_string(result))); // check the records iteself cmp_records_and_completion(orig,result); // copy cstr Test_Run_Result result1(result); TEST_ASSERT(result==result1); cmp_records_and_completion(orig,result1); // assignment Test_Run_Result result2(LEVEL_AUDIT,LEVEL_AUDIT); TEST_ASSERT(result!=result2); result2=result; TEST_ASSERT(result==result2); cmp_records_and_completion(orig,result2); } void Correct_Trace_Processing::manual_copy(Records_t const & orig,Test_Data & test_data,Level_t const target_level) const { // empty copy Test_Run_Result result(LEVEL_AUDIT,target_level); // check the level TEST_ASSERT(result.build_level()==LEVEL_AUDIT); TEST_ASSERT(result.target_level()==target_level); // really empty? TEST_ASSERT(result.abstract_state()==Test_Run_Result::STATE_EMPTY); // do a manual copy just leaving out the last record Const_Iterator_t cur(orig.begin()); Const_Iterator_t const end(orig.end()-1); for(;cur!=end;++cur) { result.add_record(*cur); // check incomplete state TEST_ASSERT(result.abstract_state()==Test_Run_Result::STATE_INCOMPLETE); } // add last (check for completion (if complete) is in cmp_records_and_completion... by m_record_vector->check) result.add_record(*cur); // check operator<< TEST_ASSERT( test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"result-" + ::std::string(level_to_string(target_level)), ::diagnostics::internal::to_string(result))); // check the records itself cmp_records_and_completion(orig,result); } void Correct_Trace_Processing::check_impossible_adding(Type_t const type, Test_Run_Result & result) const { TEST_THROWING_BLOCK_ENTER; result.add_record(CSTR_RECORD("invalid add",LEVEL_PROD,type)); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; result.add_record(CSTR_RECORD("invalid add",LEVEL_DEBUG,type)); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; result.add_record(CSTR_RECORD("invalid add",LEVEL_AUDIT,type)); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; result.add_record(CSTR_RECORD("invalid add",LEVEL_TEST,type)); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); result.add_record(CSTR_RECORD("ignored",LEVEL_SYSTEM,type)); } void Correct_Trace_Processing::cmp_records_and_completion(Records_t const & orig, Test_Run_Result & result) const { // check the records iteself cmp_records(orig,result.records()); // check the derived variables m_record_vector->check(result,false,result.target_level()); // check whether TYPE_LOG_OPEN and TYPE_LOG_CLOSE are really ignored result.add_record(CSTR_RECORD("ignored",LEVEL_PROD,TYPE_LOG_OPEN)); result.add_record(CSTR_RECORD("ignored",LEVEL_PROD,TYPE_LOG_CLOSE)); result.add_record(CSTR_RECORD("ignored",LEVEL_DEBUG,TYPE_LOG_OPEN)); result.add_record(CSTR_RECORD("ignored",LEVEL_DEBUG,TYPE_LOG_CLOSE)); result.add_record(CSTR_RECORD("ignored",LEVEL_AUDIT,TYPE_LOG_OPEN)); result.add_record(CSTR_RECORD("ignored",LEVEL_AUDIT,TYPE_LOG_CLOSE)); result.add_record(CSTR_RECORD("ignored",LEVEL_TEST,TYPE_LOG_OPEN)); result.add_record(CSTR_RECORD("ignored",LEVEL_TEST,TYPE_LOG_CLOSE)); check_impossible_adding(TYPE_BLOCK_ENTER,result); check_impossible_adding(TYPE_BLOCK_EXIT,result); check_impossible_adding(TYPE_PROCEDURE_ENTER,result); check_impossible_adding(TYPE_PROCEDURE_EXIT,result); check_impossible_adding(TYPE_METHOD_ENTER,result); check_impossible_adding(TYPE_METHOD_EXIT,result); check_impossible_adding(TYPE_TRACE,result); check_impossible_adding(TYPE_TRACE_BINARY,result); check_impossible_adding(TYPE_FAILED_CHECK,result); check_impossible_adding(TYPE_UNEXPECTED_EXCEPTION,result); check_impossible_adding(TYPE_WRONG_EXCEPTION,result); check_impossible_adding(TYPE_MISSING_EXCEPTION,result); check_impossible_adding(TYPE_TESTCASE_ENTER,result); check_impossible_adding(TYPE_TESTCASE_EXIT,result); // check the records again cmp_records(orig,result.records()); // check the derived variables m_record_vector->check(result,false,result.target_level()); } void Correct_Trace_Processing::cmp_records(Records_t const & orig, Records_t const & copy) const { Const_Iterator_t cur(orig.begin()); Const_Iterator_t const end(orig.end()); Const_Iterator_t cur2(copy.begin()); Const_Iterator_t const end2(copy.end()); for(;cur!=end;++cur) { if(cur->type()==TYPE_LOG_OPEN) continue; if(cur->type()==TYPE_LOG_CLOSE) continue; TEST_ASSERT(*cur==*cur2++); } TEST_ASSERT(cur2==end2); } /** * @brief [PRO] fct/abnormal: incorrect traces and their evaluation * * Copies the vector of Records m_record_vector->records() as a whole and pice by * pice. When copied as whole, it is only checked that * Test_System_Exception is thrown. * * When copied pice by pice, all records but the last must be * successfully copied. The last one must cause an error. Then, it is * checked that the final result is correct (m_record_vector->check), * and that the right set of records has been copied. This is only * done for target_level @ref LEVEL_PROD. */ class Incorrect_Trace_Processing { Record_Vector * const m_record_vector; public: typedef Test_Run_Result::Records_t Records_t; typedef Records_t::const_iterator Const_Iterator_t; Incorrect_Trace_Processing(Record_Vector * const r) : m_record_vector(r) { } Incorrect_Trace_Processing(Incorrect_Trace_Processing const & other) : m_record_vector(other.m_record_vector->clone()) { } ~Incorrect_Trace_Processing() { delete m_record_vector; } void operator()(Test_Data & test_data) const; private: void copy_as_whole(Records_t const & orig,Test_Data & test_data) const; void manual_copy(Records_t const & orig,Test_Data & test_data) const; void check_result(Records_t const & orig, Test_Run_Result const & result) const; }; void Incorrect_Trace_Processing::operator()(Test_Data & test_data) const { Records_t const records(m_record_vector->records()); copy_as_whole(records,test_data); manual_copy(records,test_data); } void Incorrect_Trace_Processing::copy_as_whole(Records_t const & orig,Test_Data & test_data) const { // copy as whole here TEST_THROWING_BLOCK_ENTER; Test_Run_Result result(LEVEL_PROD,LEVEL_PROD,orig); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } void Incorrect_Trace_Processing::manual_copy(Records_t const & orig,Test_Data & test_data) const { // empty copy Test_Run_Result result(LEVEL_PROD,LEVEL_PROD); // check the level TEST_ASSERT(result.build_level()==LEVEL_PROD); TEST_ASSERT(result.target_level()==LEVEL_PROD); // really empty? TEST_ASSERT(result.abstract_state()==Test_Run_Result::STATE_EMPTY); // do a manual copy just leaving out the last record Const_Iterator_t cur(orig.begin()); Const_Iterator_t const end(orig.end()-1); for(;cur!=end;++cur) { result.add_record(*cur); // check (in)complete state TEST_ASSERT(result.abstract_state()== (cur->type()==TYPE_TESTCASE_EXIT ? Test_Run_Result::STATE_COMPLETE : Test_Run_Result::STATE_INCOMPLETE)); } // add last -- must fail TEST_THROWING_BLOCK_ENTER; result.add_record(*cur); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); // check operator<< TEST_ASSERT( test_data.compare (DIAGNOSTICS_COMPILATION_MODE_ID+"result", ::diagnostics::internal::to_string(result))); // check the records itself check_result(orig,result); } void Incorrect_Trace_Processing::check_result(Records_t const & orig, Test_Run_Result const & result) const { Const_Iterator_t cur(orig.begin()); Const_Iterator_t const end(orig.end()-1); // NOT the last one Const_Iterator_t cur2(result.records().begin()); Const_Iterator_t const end2(result.records().end()); for(;cur!=end;++cur) { if(cur->type()==TYPE_LOG_OPEN) continue; if(cur->type()==TYPE_LOG_CLOSE) continue; TEST_ASSERT(*cur==*cur2++); } TEST_ASSERT(cur2==end2); m_record_vector->check(result,false,LEVEL_PROD); } /** * @brief [PRO] impl: The implementation for deciding whether the * target_level and the build_level are in the correct relationship to * each other depends on the following ordering. */ void level_odering(Test_Data &) { TEST_ASSERT(LEVEL_PROD, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_suite_traversal.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::Test_Suite_Traversal middle-class * * $Id: test_suite_traversal.cpp,v 1.9 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart */ #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_Suite_Traversal::Test_Suite_Traversal() { } Test_Suite_Traversal::~Test_Suite_Traversal() { } void Test_Suite_Traversal::traverse(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level) { if(!mask_adheres_convention(mask)) throw Test_System_Exception("Invalid mask '" + mask + "'"); //// must begin with a '/' (DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR) //if(mask.find(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR)!=0) // throw Test_System_Exception("The mask must start with a '" // DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR "'"); //// is not allowed to conatain '//' (DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR) //if(mask.find(DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR)!= ::std::string::npos) // throw Test_System_Exception("The mask is not allowed to contain a '" // DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR "'"); // //// is not allowed to contain a CASE_SEPERATOR directly followed by another one. //// at the moment, that's the same as the previous check -- but who knows.... the future. //if(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR != // DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR) // if(mask.find(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR // DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR)!= ::std::string::npos) // throw Test_System_Exception("The mask is not allowed to contain a '" // DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR // "' direclty followed by another one"); Path_t path; enter_hook(test_suite,mask,level); try { p_traverse(test_suite,mask,path,level); } catch(...) { exit_hook(test_suite,mask,level,true); throw; } exit_hook(test_suite,mask,level,false); } void Test_Suite_Traversal::p_traverse(Test_Suite const & test_suite, ::std::string mask, Path_t & path, Level_t const level) { if(test_suite.name().size()!=0) { // test_suite has a name if(mask.find(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK)==0) { // there is an asterisk for this level if(mask.size()!=sizeof(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK)-1) { // asterisk is only for this level -- mask has to change mask.erase(0,sizeof(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK)-1); } } else { // there is not asterisk for this level ::std::string const prefix(DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR+test_suite.name()); if(mask.find(prefix)==0) { // the name of the suite is matched mask.erase(0,prefix.size()); } else return; } } visit_hook(test_suite,path,level); path.push_back(test_suite.name()); { Test_Suite::Test_Cases_t::const_iterator current(test_suite.test_cases().begin()); Test_Suite::Test_Cases_t::const_iterator const end(test_suite.test_cases().end()); for(;current!=end;++current) p_traverse(**current,mask,path,level); } { Test_Suite::Test_Suites_t::const_iterator current(test_suite.test_suites().begin()); Test_Suite::Test_Suites_t::const_iterator const end(test_suite.test_suites().end()); for(;current!=end;++current) p_traverse(**current,mask,path,level); } path.pop_back(); leave_hook(test_suite,path,level); } void Test_Suite_Traversal::p_traverse(Test_Case const & test_case, ::std::string const & mask, Path_t const & path, Level_t const level) { // order is essential in this test. is_testable_at(LEVEL_TEST) throws! if(level!=LEVEL_TEST && !test_case.is_testable_at(level)) return; // asterisk or name matches if(mask==DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_ASTERISK || mask==DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR+test_case.name()) visit_hook(test_case,path,level); } void Test_Suite_Traversal::enter_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level) { } void Test_Suite_Traversal::exit_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level, bool const exception_going_through) { } void Test_Suite_Traversal::visit_hook(Test_Suite const & test_suite, Path_t const & path, Level_t const level) { } void Test_Suite_Traversal::leave_hook(Test_Suite const & test_suite, Path_t const & path, Level_t const level) { } void Test_Suite_Traversal::visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level) { } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_suite_traversal.hpp0000644000076500000240000002136111172433105024500 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_suite_traversal.hpp * * @brief [LEVEL: beta] @ref * diagnostics::unittest::Test_Suite_Traversal middle-class * * $Id: test_suite_traversal.hpp,v 1.18 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart * * @test diagnostics/unittest/test_system/test_suite_traversal.t.cpp */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_SUITE_TRAVERSAL_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_SUITE_TRAVERSAL_HPP__INCLUDE_GUARD #include // used in the interface by value #include // used in the interface by reference #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference // class Test_Suite; // used in the interface by reference // class Test_Case; /** * @class Test_Suite_Traversal diagnostics/unittest/test_system/test_suite_traversal.hpp * * @brief Provides a Traversal through a @ref Test_Suite, whereby it * is possible to select Test_Suites and Test_Cases which are going to * be visited by a string mask and the build-level they are supposed * to work at (LEVEL_TEST matches all). Concrete Traversals must * implement the hook methods. * * The traversal order is as follows: * @arg visit_hook /S1 * @arg visit_hook /S1/C1 * @arg visit_hook /S1/S2 * @arg visit_hook /S1/S2/C1 * @arg visit_hook /S1/S2/C2 * @arg leave_hook /S1/S2 * @arg visit_hook /S1/S3 * @arg visit_hook /S1/S3/C1 * @arg visit_hook /S1/S3/C2 * @arg leave_hook /S1/S3 * @arg leave_hook /S1 * where S* are suites and C* are cases -- and the suites and cases have * been ADDED in this ORDER, i.e., S2 before S3, the C1s before C2s. * * In general, the mask is of the form * /X_1/X_2/.../X_n. Each X_i is a string, if X_i=="*" then it matches * any string. If X_i!="*" then it has to match exactly the name of * the corresponding suite or case. If X_n=="*" then whole * corresponding subtree is matched. For example, the mask /A (we use * A for * to avoid problems with the C++ preprocessor) matches * everything. The mask /A/S3/A would give the following trace: * @arg visit_hook /S1 * @arg visit_hook /S1/S3 * @arg visit_hook /S1/S3/C1 * @arg visit_hook /S1/S3/C2 * @arg leave_hook /S1/S3 * @arg leave_hook /S1 * * @note There exist nameless Test_Suites. However, they can only be * the root of a Test_Suite-Tree. In such a case, the first element in * the path is an empty string. * * @nosubgrouping */ class Test_Suite_Traversal { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ private: typedef Test_Suite_Traversal Self; public: typedef ::std::vector< ::std::string> Path_t; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief do nothing * * @throw never */ virtual ~Test_Suite_Traversal(); protected: /** * @brief Only used as a base class. * * @throw never */ Test_Suite_Traversal(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: /** * @brief Traverse the @a test_suite and visit all Test_Suites and Test_Cases which * have a path that matches the @a mask and which are testable at @a level. * * @pre @ref ::diagnostics::mask_adheres_convention (mask)==true * * @throw anything (because of the called hooks) * @throw Test_System_Exception if the precondition is not met. */ void traverse(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Hooks * @{ */ protected: /** * @brief Called direclty after entering @ref traverse [default: * noop] * * The parameters are excatly the same as in for traverse -- they * are handed through. * * @throw anything */ virtual void enter_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level); /** * @brief Called as last hook of a @ref traverse invocation * [default: noop] * * The parameters are excatly the same as in for traverse -- they * are handed through. @a exception_going_through==true if * exit_hook is called from an exception handler. * * @throw anything */ virtual void exit_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level, bool const exception_going_through); /** * @brief Called when a @ref Test_Suite is entered for the first * time [default: noop] * * No hook for any @ref Test_Suite or @ref Test_Case which is * contained in the currently visited Test_Suite has been called * before. * * A @ref Test_Suite is visited iff its path is matched by the * mask. * * @param test_suite the visited @ref Test_Suite * @param path the names of the Test_Suites along the path to the * current one (does not include the name of the current * Test_Suite). * @param level the build-level we are searching for * * @throw anything */ virtual void visit_hook(Test_Suite const & test_suite, Path_t const & path, Level_t const level); /** * @brief Called when a @ref Test_Suite is completely processed * [default: noop] * * The hooks for every @ref Test_Suite or @ref Test_Case which are * contained in the currently visited Test_Suite have been called * before. * * The meaning and values of the parameters match exactly the * parameters of the corresponding @ref visit_hook invocation. * * @throw anything */ virtual void leave_hook(Test_Suite const & test_suite, Path_t const & path, Level_t const level); /** * @brief Called when a @ref Test_Case is visited [default: noop] * * A @ref Test_Case is only visited iff * @arg @a level == @ref LEVEL_TEST or if * test_case.is_testable_at(level) == true. * @arg its path is matched by the mask * * @param test_case the visited @ref Test_Case * @param path the names of the Test_Suites along the path to the * current one (does not include the name of the current * Test_Case). * @param level the build-level we are searching for * * @throw anything */ virtual void visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Encapsulated Modifiers * @{ */ private: /** * @brief traverese a @ref Test_Suite -- decide whether to go on * recursively, and whether to visit * * @throw anything */ void p_traverse(Test_Suite const & test_suite, ::std::string mask, Path_t & path, Level_t const level); /** * @brief traverse a @ref Test_Case -- decide whether to visit * * @throw anything */ void p_traverse(Test_Case const & test_case, ::std::string const & mask, Path_t const & path, Level_t const level); // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_suite_traversal.t.cpp0000644000076500000240000002145311172433105024737 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_suite_traversal.t.cpp * * @brief [LEVEL: beta] testing @ref * diagnostics::unittest::Test_Suite_Traversal * * $Id: test_suite_traversal.t.cpp,v 1.13 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart */ #include #include // used components #include #include // test support #include #include #include #define TEST_COMPONENT_NAME Test_Suite_Traversal #define TEST_COMPONENT_NAMESPACE diagnostics::unittest DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; void check_visit(Test_Data & test_data, Test_Suite & suite, ::std::string mask, Level_t const level) { ::std::ostringstream stream; Dummy_Test_Suite_Traversal traversal(stream); traversal.traverse(suite,mask,level); ::std::string::size_type const npos(::std::string::npos); ::std::string::size_type f; for(f=mask.find('/');f!=npos;f=mask.find('/')) mask[f]='-'; for(f=mask.find('*');f!=npos;f=mask.find('*')) mask[f]='A'; TEST_ASSERT(test_data.compare(::std::string(level_to_string(level)) + "::" + mask,stream.str())); } void dump_simple_test_suite(Test_Data & test_data) { Test_Suite *s1(simple_test_suite()); check_visit(test_data,*s1,"/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/S2/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/S3/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/*/C1",LEVEL_TEST); check_visit(test_data,*s1,"/*/*/C2",LEVEL_TEST); check_visit(test_data,*s1,"/*/*/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/C1",LEVEL_TEST); check_visit(test_data,*s1,"/*/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/*/*/*",LEVEL_TEST); delete s1; } void dump_simple_unnamed_test_suite(Test_Data & test_data) { Test_Suite *s1(simple_unnamed_test_suite()); check_visit(test_data,*s1,"/*",LEVEL_TEST); check_visit(test_data,*s1,"/S2/*",LEVEL_TEST); check_visit(test_data,*s1,"/S3/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/C1",LEVEL_TEST); check_visit(test_data,*s1,"/*/C2",LEVEL_TEST); check_visit(test_data,*s1,"/*/*",LEVEL_TEST); check_visit(test_data,*s1,"/C1",LEVEL_TEST); delete s1; } void dump_test_suite_all_test_case_variations(Test_Data & test_data) { Test_Suite *s1(test_suite_all_test_case_variations()); check_visit(test_data,*s1,"/*",LEVEL_TEST); check_visit(test_data,*s1,"/*",LEVEL_AUDIT); check_visit(test_data,*s1,"/*",LEVEL_DEBUG); check_visit(test_data,*s1,"/*",LEVEL_PROD); check_visit(test_data,*s1,"/*/S2/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/S2/*",LEVEL_AUDIT); check_visit(test_data,*s1,"/*/S2/*",LEVEL_DEBUG); check_visit(test_data,*s1,"/*/S2/*",LEVEL_PROD); check_visit(test_data,*s1,"/*/S3/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/S3/*",LEVEL_AUDIT); check_visit(test_data,*s1,"/*/S3/*",LEVEL_DEBUG); check_visit(test_data,*s1,"/*/S3/*",LEVEL_PROD); check_visit(test_data,*s1,"/*/*/name1",LEVEL_TEST); check_visit(test_data,*s1,"/*/*/name1",LEVEL_AUDIT); check_visit(test_data,*s1,"/*/*/name1",LEVEL_DEBUG); check_visit(test_data,*s1,"/*/*/name1",LEVEL_PROD); check_visit(test_data,*s1,"/*/*/name2",LEVEL_TEST); check_visit(test_data,*s1,"/*/*/name2",LEVEL_AUDIT); check_visit(test_data,*s1,"/*/*/name2",LEVEL_DEBUG); check_visit(test_data,*s1,"/*/*/name2",LEVEL_PROD); check_visit(test_data,*s1,"/*/*/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/*/*",LEVEL_AUDIT); check_visit(test_data,*s1,"/*/*/*",LEVEL_DEBUG); check_visit(test_data,*s1,"/*/*/*",LEVEL_PROD); check_visit(test_data,*s1,"/*/name1",LEVEL_TEST); check_visit(test_data,*s1,"/*/name1",LEVEL_AUDIT); check_visit(test_data,*s1,"/*/name1",LEVEL_DEBUG); check_visit(test_data,*s1,"/*/name1",LEVEL_PROD); check_visit(test_data,*s1,"/*/*",LEVEL_TEST); check_visit(test_data,*s1,"/*/*",LEVEL_AUDIT); check_visit(test_data,*s1,"/*/*",LEVEL_DEBUG); check_visit(test_data,*s1,"/*/*",LEVEL_PROD); delete s1; } void empty_suite(Test_Data & test_data) { ::std::ostringstream stream; Dummy_Test_Suite_Traversal traversal(stream); Test_Suite s1("S1"); check_visit(test_data,s1,"/*",LEVEL_TEST); check_visit(test_data,s1,"/*",LEVEL_AUDIT); check_visit(test_data,s1,"/*",LEVEL_DEBUG); check_visit(test_data,s1,"/*",LEVEL_PROD); check_visit(test_data,s1,"/S1/*",LEVEL_TEST); check_visit(test_data,s1,"/S1/S2/*",LEVEL_TEST); check_visit(test_data,s1,"/*/*/*",LEVEL_TEST); } class Throwing_Test_Suite_Traversal : public Test_Suite_Traversal { public: Throwing_Test_Suite_Traversal() : m_exception_going_through(false) { } bool exception_going_through() const { return m_exception_going_through; } protected: virtual void visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level) { throw 5; } virtual void exit_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level, bool const exception_going_through) { m_exception_going_through=exception_going_through; } private: bool m_exception_going_through; }; void throwing_test_suite_traversal(Test_Data & test_data) { Throwing_Test_Suite_Traversal traversal; Test_Suite *s1(simple_unnamed_test_suite()); TEST_ASSERT(traversal.exception_going_through()==false); traversal.traverse(*s1,"/NOTHING",LEVEL_TEST); TEST_ASSERT(traversal.exception_going_through()==false); TEST_THROWING_BLOCK_ENTER; traversal.traverse(*s1,"/*",LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(int); TEST_ASSERT(traversal.exception_going_through()==true); } void incorrect_masks(Test_Data & test_data) { ::std::ostringstream stream; Dummy_Test_Suite_Traversal traversal(stream); Test_Suite suite("S1"); TEST_THROWING_BLOCK_ENTER; traversal.traverse(suite,"a",LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; traversal.traverse(suite,DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR,LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; traversal.traverse(suite,"a" DIAGNOSTICS_UNITTEST_TEST_DATA_NAME_SEPARATOR,LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; traversal.traverse(suite, DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR, LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); TEST_THROWING_BLOCK_ENTER; traversal.traverse(suite, DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR "a" DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR DIAGNOSTICS_UNITTEST_TEST_CASE_NAME_SEPARATOR, LEVEL_TEST); TEST_THROWING_BLOCK_EXIT(Test_System_Exception); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&dump_simple_unnamed_test_suite,LEVEL_PROD); TEST_NORMAL_CASE(&dump_simple_test_suite,LEVEL_PROD); TEST_NORMAL_CASE(&dump_test_suite_all_test_case_variations,LEVEL_PROD); TEST_NORMAL_CASE(&empty_suite,LEVEL_PROD); TEST_NORMAL_CASE(&throwing_test_suite_traversal,LEVEL_PROD); TEST_ABNORMAL_CASE(&incorrect_masks,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_system.cpp0000644000076500000240000000316111172433105022601 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_system.cpp * * @brief [LEVEL: beta] Implementation of @ref * diagnostics::unittest::Test_System interface * * $Id: test_system.cpp,v 1.5 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_System::~Test_System() { } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system/test_system.hpp0000644000076500000240000001021311172433105022602 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system/test_system.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_System * interface * * $Id: test_system.hpp,v 1.8 2005/06/23 09:54:27 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_SYSTEM_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM__TEST_SYSTEM_HPP__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; // used in the interface by reference // class Test_Suite; // used in the interface by reference // class Test_Case; /** * @class Test_System diagnostics/unittest/test_system/test_system.hpp * * @brief Provides the abstraction for the unittest enviroment -- with * this interface at hand, Test_Cases and Test_Suites can be added and * finally they all can be tested by calling @ref run. * * @nosubgrouping */ class Test_System { //////////////////////////////////////////////////////////////////////////////// /** * @name Types * @{ */ public: /** * @brief The result of run -- used as bitmask */ enum { /** * @brief a test failure occured */ TEST_SYSTEM_RESULT_FAILURE=1, /** * @brief a test could not be executed and driven to a * conclusion, e.g., a test input file was missing */ TEST_SYSTEM_RESULT_INVALID=2 }; // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Creation * @{ */ public: /** * @brief do nothing * * @throw never */ virtual ~Test_System(); // @} //////////////////////////////////////////////////////////////////////////////// /** * @name Modifiers * @{ */ public: /** * @brief adding a @ref Test_Suite * * @pre @a test_suite != NULL * @pre @a test_suite->name() != "" * @pre there is no other already added Test_Suite with the same name * * @throw Test_System_Exception if a precondition is not met */ virtual void add(Test_Suite * const test_suite) =0; /** * @brief adding a @ref Test_Case * * @pre @a test_case != NULL * @pre @a test_case->name() != "" * @pre there is no other already added Test_Case with the same name * * @throw Test_System_Exception if a precondition is not met */ virtual void add(Test_Case * const test_case) =0; /** * @brief starting the Test_System -- depending on the concrete * Test_System, the added Test_Cases and Test_Suites will be * executed, interactively or non-interactively. * * @return a bit mask describing the error state. * * @throw Test_System_Exception (implementation dependent -- any * internal error) */ virtual int run() =0; // @} }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system_exception.cpp0000644000076500000240000000340511172433106022276 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system_exception.cpp * * @brief [LEVEL: beta] implementation of @ref * diagnostics::unittest::Test_System_Exception class * * $Id: test_exception.cpp,v 1.8 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; Test_System_Exception::~Test_System_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } char const * Test_System_Exception::name() const { return "Test_System_Exception"; } UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/test_system_exception.hpp0000644000076500000240000000511311172433106022301 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/test_system_exception.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Test_System_Exception * * $Id: test_exception.hpp,v 1.11 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UNITTEST__TEST_SYSTEM_EXCEPTION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TEST_SYSTEM_EXCEPTION_HPP__INCLUDE_GUARD #include // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; /** * @class Test_System_Exception diagnostics/unittest/test_exception.hpp * * @brief Thrown if the test system detects detects an internal error or if * the client tries to tries to initialize a components of the test system in * an erroneous way. * * For example, if a @ref Test_Case tries to get a string from @ref Test_Data * but the underlying @ref Test_Data is not initialized yet. * * @nosubgrouping */ class Test_System_Exception : public Std_Exception { public: /** * @throw never */ inline Test_System_Exception(::std::string const & what) : Std_Exception(what) { } /** * @throw never */ virtual ~Test_System_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; /** * @throw never */ virtual char const * name() const; }; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest/testing_namespaces.hpp0000644000076500000240000000464611172433106021526 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest/testing_namespaces.hpp * @brief [LEVEL: beta] the namespaces for test code * * $Id: testing_namespaces.hpp,v 1.4 2005/06/23 09:54:25 esdentem Exp $ * * @author Christian Schallhart */ #ifndef DIAGNOSTICS__UNITTEST__TESTING_NAMESPACES_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST__TESTING_NAMESPACES_HPP__INCLUDE_GUARD #ifndef TEST_NAMESPACE /** * @brief general namespace for test-code: to be nested in the * namespace which contains the tested code */ # define TEST_NAMESPACE testing # define TEST_NAMESPACE_BEGIN namespace TEST_NAMESPACE { void dummy_for_semicolon_do_not_use() # define TEST_NAMESPACE_END } void dummy_for_semicolon_do_not_use() #endif #define TEST_INTERNAL_CONCAT_1(A,B) A ## B #define TEST_INTERNAL_CONCAT(A,B) TEST_INTERNAL_CONCAT_1(A,B) /** * @brief the namespace for the test-code of a single component: to be * nested in the namespace which contains all the test code for a * given tested namespace. */ #define TEST_COMPONENT_TEST_NAMESPACE TEST_INTERNAL_CONCAT(COMPONENT_,TEST_COMPONENT_NAME) #define TEST_COMPONENT_TEST_NAMESPACE_BEGIN namespace TEST_COMPONENT_TEST_NAMESPACE { void dummy_for_semicolon_do_not_use() #define TEST_COMPONENT_TEST_NAMESPACE_END } void dummy_for_semicolon_do_not_use() #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/unittest.hpp0000644000076500000240000000371211172433107015644 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/unittest.hpp * * $Id: unittest.hpp,v 1.12 2005/06/23 09:54:19 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] Use-Case: The include-files for building test suites * and executing them. * * All headers which are necessary to build a unittest are included by * this header. Do not use this header in production code, i.e., code * which should be tested but which is not the testing code. */ #ifndef DIAGNOSTICS__UNITTEST_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UNITTEST_HPP__INCLUDE_GUARD #include #include #include #include #include #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/0000755000076500000240000000000011567507572014326 500000000000000diagnostics-0.3.3/diagnostics/util/assert_record.ts.hpp0000644000076500000240000000446011172433107020227 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/assert_record.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief @ref TEST_ASSERT_RECORD and @ref TEST_ASSERT_RECORD1 * * @test none */ #ifndef DIAGNOSTICS__UTIL__ASSERT_RECORD_TS___INCLUDE_GUARD #define DIAGNOSTICS__UTIL__ASSERT_RECORD_TS___INCLUDE_GUARD #include #define TEST_ASSERT_RECORD(LEVEL,TYPE,NR_WHAT,STR_WHAT,BASE,FILE,LINE) do {\ TEST_ASSERT_RELATION(current->level(),==,(LEVEL)); \ TEST_ASSERT_RELATION(current->type(),==,(TYPE)); \ TEST_ASSERT_RELATION(current->nr_what(),==,(NR_WHAT)); \ TEST_ASSERT_RELATION(current->str_what(),==,(STR_WHAT)); \ TEST_ASSERT_RELATION(current->base_file_name(),==,(BASE)); \ TEST_ASSERT_RELATION(current->file_name(),==,(FILE)); \ TEST_ASSERT_RELATION(current->line(),==,(LINE)); } while(false) #define TEST_ASSERT_RECORD1(LEVEL,TYPE,NR_WHAT,STR_WHAT) do {\ TEST_ASSERT_RELATION(current->level(),==,(LEVEL)); \ TEST_ASSERT_RELATION(current->type(),==,(TYPE)); \ TEST_ASSERT_RELATION(current->nr_what(),==,(NR_WHAT)); \ TEST_ASSERT_RELATION(current->str_what(),==,(STR_WHAT)); } while(false) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/blind_test_run_result.ts.cpp0000644000076500000240000000476611513034153022002 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/blind_test_run_result.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] implementation of @ref ::diagnostics::unittest::testing::blind_test_run_result * * @test none */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; ::std::string blind_test_run_result(::std::string const & in) { ::std::string result; char const * const search_string("Test_Run_Result "); int const search_string_len(::std::strlen(search_string)); ::std::string::size_type last_pos(0); ::std::string::size_type pos(in.find(search_string)); for(;pos!= ::std::string::npos; pos=in.find(search_string,last_pos)){ pos+=search_string_len; result.append("XX"); result.append(in,last_pos,pos-last_pos); // copying everything up to "Test_Run_Result " last_pos=in.find("]:",pos)+2; // jumping post "[host pid/tid]:" pos=in.find(" in ",last_pos)+4; // spawning the copy area to the " in " result.append("XX"); result.append(in,last_pos,pos-last_pos); last_pos=in.find("secs",pos)+4; // jumping post the "xxx secs" } result.append("XX"); result.append(in,last_pos,in.size()-last_pos); return result; } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/blind_test_run_result.ts.hpp0000644000076500000240000000451111172433107021776 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/blind_test_run_result.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::unittest::testing::blind_test_run_result * * @test none */ #ifndef DIAGNOSTICS__UTIL__BLIND_TEST_RUN_RESULT_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__BLIND_TEST_RUN_RESULT_TS_HPP__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; /** * @brief takes a string which contains the output of zero or more * Test_Run_Result (generated with operator<<) and returns a string * which with the same content except that all system and exeuction * particularities are removed, i.e., no hostname, pid, tid, or timing * informaion is left. * * @attention this procedure is not intelligent. To help in case of * trouble, each cut-point is marked by an XX. * * @attention assumes that the Test_Run_Result contains only the @ref * TYPE_TESTCASE_ENTER and @ref TYPE_TESTCASE_EXIT @ref Record s. */ ::std::string blind_test_run_result(::std::string const & in); TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/compilation_mode.ts.hpp0000644000076500000240000000467711172433107020724 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/compilation_mode.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref DIAGNOSTICS_COMPILATION_MODE_ID is a * string which uniquley identifies the current compilation mode * (which switches are on and off). This is used to test diagnostics * with different compilation switches. * * @test none */ #ifndef DIAGNOSTICS_UTIL_COMPILATION_MODE_TS__INCLUDE_GUARD #define DIAGNOSTICS_UTIL_COMPILATION_MODE_TS__INCLUDE_GUARD // for @ref DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED #include // for @ref ::diagnostics::testing::Dummy_Values_For_Tid_Pid and // @ref ::diagnostics::testing::Dummy_Values_For_Tid_Tid #include #include /** * @brief used to generate different test data ids for different buid styles */ #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # define DIAGNOSTICS_COMPILATION_MODE_ID (::std::string("sys")+ \ (::diagnostics::testing::Dummy_Values_For_Pid::is_pointer ? "p" : "i")+ \ (::diagnostics::testing::Dummy_Values_For_Tid::is_pointer ? "p" : "i") ) #else # define DIAGNOSTICS_COMPILATION_MODE_ID (::std::string("nosys")) #endif #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff.cpp0000644000076500000240000000403111172433107015640 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff.cpp * * @brief [LEVEL: alpha] Implementation of @ref * diagnostics::internal::diff_text * * $Id: diff.cpp 861 2009-04-18 20:14:51Z tautschnig $ * * @author Piotr Esden-Tempski */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; void diff_text(::std::string const & texta, ::std::string const & textb, ::std::string & result, bool const use_color){ Diff_Generator dg; dg.texta(texta); dg.textb(textb); dg.diff_text(result, use_color); } ::std::string diff_text(::std::string const & texta, ::std::string const & textb, bool const use_color){ ::std::string result; diff_text(texta, textb, result, use_color); return result; // one extra copy } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff.hpp0000644000076500000240000000432111172433107015647 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff.hpp * * @brief [LEVEL: alpha] @ref diagnostics::internal::diff_text * * This component contains interfaces for diffing strings. Currently, * there are only methods for generating a string which describes the * diff in a human-readable form. * * $Id: diff.hpp 861 2009-04-18 20:14:51Z tautschnig $ * * @author Piotr Esden-Tempski * * @test diagnostics/util/diff.t.cpp */ #ifndef DIAGNOSTICS__UTIL__DIFF_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DIFF_HPP__INCLUDE_GUARD #include // used by reference in the interface #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @brief * * @todo document */ void diff_text(::std::string const & texta, ::std::string const & textb, ::std::string & result, bool const use_color); /** * @brief * * @todo document */ ::std::string diff_text(::std::string const & texta, ::std::string const & textb, bool const use_color); INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff.t.cpp0000644000076500000240000000713411172433107016111 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff.t.cpp * * @brief [LEVEL: alpha] testing @ref diagnostics::internal::diff_text * * $Id: diff.t.cpp 861 2009-04-18 20:14:51Z tautschnig $ * * @author Piotr Esden-Tempski */ #include #include // used components #include #define TEST_COMPONENT_NAME diff #define TEST_COMPONENT_NAMESPACE diagnostics::internal DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; /** * @brief [PRO] fct/normal: test the call by value interface */ void diff_call_by_value(Test_Data & test_data) { ::std::string result; diff_text("Blubb\nBlubber", "Blubb\nbalub\nBlubber", result, true); TEST_ASSERT(test_data.compare("one line added",result)); } /** * @brief [PRO] fct/normal: test the return value interface */ void diff_return_value(Test_Data & test_data) { TEST_ASSERT(test_data.compare("one line added", diff_text("Blubb\nBlubber", "Blubb\nbalub\nBlubber", true))); } /** * @brief [PRO] fct/normal: test proper operation of diff */ void diff_functional_test(Test_Data & test_data) { TEST_ASSERT(test_data.compare("diff_test_simple", diff_text("A", "AA", true))); TEST_ASSERT(test_data.compare("diff_test_from_fortas", diff_text( "No source files available\n" "syntax error, unexpected $end, expecting TOK_PATH or TOK_C_IDENT; type \"help\" to get usage information\n" "file line 1 column 66: failed to find symbol `c::y'\n" "Type checking failed\n" "Path is feasible, e.g., main::argc=2\n" "Path is infeasible\n" "Path is feasible, e.g., main::argc=2\n" "Bye.\n", "No source files available\n" "syntax error, unexpected $end, expecting TOK_PATH or TOK_C_IDENT; type \"help\" to get usage information\n" "Path is infeasible\n" "Path is infeasible\n" "Path is infeasible\n" "Path is infeasible\n" "Bye.\n", true))); TEST_ASSERT(test_data.compare("diff_test_simple2", diff_text("Row1\nRow2\nRow3\nRow4", "RowX\nRowX\nRow1\nRow2\nRow3\nRow4",true))); } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&diff_call_by_value,LEVEL_PROD); TEST_NORMAL_CASE(&diff_return_value,LEVEL_PROD); TEST_NORMAL_CASE(&diff_functional_test,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff_exception.cpp0000644000076500000240000000330611172433107017722 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff_exception.cpp * * @brief [LEVEL: beta] implementation of @ref * diagnostics::unittest::Diff_Exception * * $Id: test_exception.cpp,v 1.8 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart */ #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; Diff_Exception::~Diff_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL { } char const * Diff_Exception::name() const { return "Diff_Exception"; } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff_exception.hpp0000644000076500000240000000446511172433107017736 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff_exception.hpp * * @brief [LEVEL: beta] @ref diagnostics::unittest::Diff_Exception * * $Id: test_exception.hpp,v 1.11 2005/06/23 09:54:24 esdentem Exp $ * * @author Christian Schallhart * * @test none */ #ifndef DIAGNOSTICS__UTIL__DIFF_EXCEPTION_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DIFF_EXCEPTION_HPP__INCLUDE_GUARD #include // used as base class #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @class Diff_Exception diagnostics/util/diff_exception.hpp * * @brief Thrown if the diff generator is unable to generate a diff output * (e.g., due to resource limits). * * @nosubgrouping */ class Diff_Exception : public Std_Exception { public: /** * @throw never */ inline Diff_Exception(::std::string const & what) : Std_Exception(what) { } /** * @throw never */ virtual ~Diff_Exception() DIAGNOSTICS_EXCEPTIONS_THROW_DECL; /** * @throw never */ virtual char const * name() const; }; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff_generator.cpp0000644000076500000240000002470211172433107017715 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff_generator.cpp * * @brief [LEVEL: alpha] Implementation of @ref * diagnostics::internal::Diff_Generator * * $Id: diff_generator.cpp 861 2009-04-18 20:14:51Z tautschnig $ * * @author Michael Tautschnig, Piotr Esden-Tempski */ #include #include #include #include /* * This is a hack: diagnostics is not allowed to log itself. * For debugging, we used the following macros, which worked fine -- * but this construction is not guaranteed to work again. * * DO NOT EVER USE THIS IN A PRODUCTION BUILD! */ #if 0 # include # include # define DIFF_GENERATOR_AUDIT 1 # define DIFF_GENERATOR_AUDIT_BLOCK_GUARD(TXT) DIAGNOSTICS_AUDIT_BLOCK_GUARD(TXT) # define DIFF_GENERATOR_AUDIT_TRACE(TXT) DIAGNOSTICS_AUDIT_TRACE(TXT) #else # define DIFF_GENERATOR_AUDIT 0 # define DIFF_GENERATOR_AUDIT_BLOCK_GUARD(TXT) # define DIFF_GENERATOR_AUDIT_TRACE(TXT) #endif DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; Diff_Generator::Diff_Generator() : m_diff_done(false) { DIFF_GENERATOR_AUDIT_BLOCK_GUARD("Diff_Generator"); } Diff_Generator::~Diff_Generator() { DIFF_GENERATOR_AUDIT_BLOCK_GUARD("~Diff_Generator"); } /* Interface methods */ void Diff_Generator::texta(::std::string const & texta) { DIFF_GENERATOR_AUDIT_BLOCK_GUARD("texta"); m_diff_done=false; /* Preparing texta */ m_vtexta.clear(); m_hasha.clear(); p_split_hash(m_vtexta, m_hasha, texta); } void Diff_Generator::textb(::std::string const & textb) { DIFF_GENERATOR_AUDIT_BLOCK_GUARD("textb"); m_diff_done=false; /* Preparing textb */ m_vtextb.clear(); m_hashb.clear(); p_split_hash(m_vtextb, m_hashb, textb); } /* Private methods */ /* Splitting the input text around '\n' and * generating hashes for every line using * hashpjw algorithm by P. J. Weinberg */ void Diff_Generator::p_split_hash(VText_t & vtext, Hash_t & hashmap, ::std::string const &text) { DIFF_GENERATOR_AUDIT_BLOCK_GUARD("p_split_hash"); unsigned long int h(0), g; unsigned long int const hash_prime(211); ::std::string::const_iterator begin(text.begin()); ::std::string::const_iterator const end(text.end()); ::std::string line; // If text is empty leave vtext and hashmap empty DIFF_GENERATOR_AUDIT_TRACE("check if input empty"); if(text.empty()){ return; } // insert a blank line at the beginning to simplify the LCSS code vtext.push_back("\n"); hashmap.push_back(0); // @todo slow loop -- improve DIFF_GENERATOR_AUDIT_TRACE("main loop"); for(;begin!=end;++begin) { if(*begin=='\n'){ DIFF_GENERATOR_AUDIT_TRACE("adding line: \"" + line + "\""); // insert a new string vtext.push_back(line + '\n'); line.clear(); // insert string hashvalue and reset hash algorithm hashmap.push_back(h%hash_prime); h = 0; }else{ line += *begin; // hash calculation h = (h << 4) + *begin; if((g=h&0xF0000000)){ h ^= g>>24; h ^= g; } } } if(!line.empty()) // in case of a missing final newline { // add a newline vtext.push_back(line + '\n'); hashmap.push_back(h%hash_prime); } } /* Use Largest Common Subsequence algorithm to create a diff */ void Diff_Generator::p_do_diff() { DIFF_GENERATOR_AUDIT_BLOCK_GUARD("p_do_diff"); if(m_diff_done) return; // reset data immediately m_diff_tupel.clear(); // at the end of this procedure, the diff will be done m_diff_done=true; // in either case, m_diff_tupel must be empty: // m_diff_tupel contains matches and in these two cases, // there are no matches. if(m_vtexta.size() == 0) return; if(m_vtextb.size() == 0) return; // LCSS matrix // this may overflow, do some checking ... int const mva_b( ::log( static_cast(m_vtexta.size()) ) / ::log(2.0) ); int const mvb_b( ::log( static_cast(m_vtextb.size()) ) / ::log(2.0) ); if( mva_b + mvb_b + 1 > static_cast< int >( sizeof( int ) * 8 ) ) throw Diff_Exception( "Text too large for diff" ); if( m_vtexta.size() > static_cast< ::std::vector::size_type >( ::std::numeric_limits< int >::max() ) ) throw Diff_Exception( "Text too large for diff" ); if( m_vtextb.size() > static_cast< ::std::vector::size_type >( ::std::numeric_limits< int >::max() ) ) throw Diff_Exception( "Text too large for diff" ); ::std::vector< int > lcss_matrix( m_vtexta.size() * m_vtextb.size() ); int const row_length( m_vtexta.size() ); int const col_count( m_vtextb.size() ); // LCSS -- fill the matrix for( int i = 0; i < row_length; ++i ) for( int j = 0; j < col_count; ++j ) if( m_hasha[ i ] == m_hashb[ j ] && m_vtexta[ i ] == m_vtextb[ j ] ) { lcss_matrix[ i + j*row_length ] = 1; if( j > 0 && i > 0 ) lcss_matrix[ i + j*row_length ] += lcss_matrix[ (i-1) + (j-1)*row_length ]; } else { lcss_matrix[ i + j*row_length ] = 0; if( j > 0 ) lcss_matrix[ i + j*row_length ] = lcss_matrix[ i + (j-1)*row_length ]; if( i > 0 ) lcss_matrix[ i + j*row_length ] = ::std::max( lcss_matrix[ i + j*row_length ], lcss_matrix[ (i-1) + j*row_length ] ); } #if DIFF_GENERATOR_AUDIT for( int j = 0; j < col_count; ++j ) { for( int i = 0; i < row_length; ++i ) ::std::cerr << lcss_matrix[ i + j*row_length ] << "\t"; ::std::cerr << ::std::endl; } #endif // LCSS -- backtracking // note that the order in case of multiple possible matches of the // if-clauses is important to provide a convenient ordering of - and + lines // (- goes before +) // note that 0,0 will not be pushed, thus the initial blank lines of m_texta // and m_vtextb will not be printed later on int i( m_vtexta.size() - 1 ), j( m_vtextb.size() - 1 ); while( i > 0 || j > 0 ) { // find next step if( i == 0 ) { m_diff_tupel.push_back(Match_t(-1, j)); --j; } else if( j == 0 ) { m_diff_tupel.push_back(Match_t(i, -1)); --i; } else { if( m_hasha[ i ] == m_hashb[ j ] && m_vtexta[ i ] == m_vtextb[ j ] ) { m_diff_tupel.push_back(Match_t(i, j)); --j; --i; } else if( lcss_matrix[ i + (j-1)*row_length ] < lcss_matrix[ i + j*row_length ] ) { m_diff_tupel.push_back(Match_t(i, -1)); --i; } else // yields going vertically after horizontal steps when done in-order later on { m_diff_tupel.push_back(Match_t(-1, j)); --j; } } #if DIFF_GENERATOR_AUDIT ::std::cerr << "Added " << m_diff_tupel.back().first << " " << m_diff_tupel.back().second << ::std::endl; #endif } } void Diff_Generator::diff_text(::std::string & diff_text, bool const use_color) { DIFF_GENERATOR_AUDIT_BLOCK_GUARD("diff_text"); p_do_diff(); diff_text = ""; // actually we could use a const_reverse_iterator here, but some gcc // versions do not support this // (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=11729) VText_t::const_iterator vta_iter( m_vtexta.empty() ? m_vtexta.begin() : ++(m_vtexta.begin()) ); VText_t::const_iterator vtb_iter( m_vtextb.empty() ? m_vtextb.begin() : ++(m_vtextb.begin()) ); for( ::std::vector< Match_t >::reverse_iterator iter( m_diff_tupel.rbegin() ); iter != m_diff_tupel.rend(); ++iter ) { if( iter->first != -1 && iter->second != -1 ) { p_append_composed_line(diff_text, ' ', *vta_iter, use_color); ++vta_iter; ++vtb_iter; } else if( iter->first != -1 ) { p_append_composed_line(diff_text, '-', *vta_iter, use_color); ++vta_iter; } else { p_append_composed_line(diff_text, '+', *vtb_iter, use_color); ++vtb_iter; } } // print remaining lines for(; vta_iter != m_vtexta.end(); ++vta_iter ) p_append_composed_line(diff_text, '-', *vta_iter, use_color); for(; vtb_iter != m_vtextb.end(); ++vtb_iter ) p_append_composed_line(diff_text, '+', *vtb_iter, use_color); } void Diff_Generator::p_append_composed_line(::std::string &target, char prefix, ::std::string const &line, bool const use_color) { char const * const ansi_red = "\033[31m"; char const * const ansi_green = "\033[32m"; char const * const ansi_reset = "\033[0m"; char prefixs[2]; prefixs[0] = prefix; prefixs[1] = '\0'; DIFF_GENERATOR_AUDIT_TRACE(::std::string("p_append_composed_line: \"") + prefixs + line + "\""); if(use_color){ switch(prefix){ case '+': target += ansi_green; target += prefixs + line + ansi_reset; break; case '-': target += ansi_red; target += prefixs + line + ansi_reset; break; case ' ': target += prefixs + line; break; } }else{ target += prefixs + line; } } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff_generator.hpp0000644000076500000240000000560011172433107017716 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff_generator.hpp * * @brief [LEVEL: alpha] @ref diagnostics::internal::Diff_Generator * implements a diff algorithm. * * $Id: diff_generator.hpp 861 2009-04-18 20:14:51Z tautschnig $ * * @author Piotr Esden-Tempski * * @test diagnostics/util/diff_generator.t.cpp */ #ifndef DIAGNOSTICS__UTIL__DIFF_GENERATOR_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DIFF_GENERATOR_HPP__INCLUDE_GUARD #include // Needed for the interface #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; /** * @class Diff_Generator diagnostics/util/diff_generator.hpp * * @brief * * @nosubgrouping * * @todo document */ class Diff_Generator { public: Diff_Generator(); ~Diff_Generator(); void texta(::std::string const & texta); void textb(::std::string const & textb); void diff_text(::std::string & diff_text, bool const use_color); private: typedef ::std::vector< ::std::string> VText_t; typedef ::std::vector Hash_t; typedef ::std::pair Match_t; typedef ::std::vector VMatch_t; VText_t m_vtexta; VText_t m_vtextb; Hash_t m_hasha; Hash_t m_hashb; bool m_diff_done; VMatch_t m_diff_tupel; /* the diff algorithm itself */ void p_do_diff(); /* helper functions */ static void p_split_hash(VText_t & vtext, Hash_t & hashmap, ::std::string const & text); static void p_append_composed_line(::std::string & target, char prefix, ::std::string const & line, bool const use_color); }; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/diff_generator.t.cpp0000644000076500000240000002425011172433107020155 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/diff_generator.t.cpp * * @brief [LEVEL: alpha] testing @ref diagnostics::internal::Diff_Generator * * $Id: diff_generator.t.cpp 861 2009-04-18 20:14:51Z tautschnig $ * * @author Piotr Esden-Tempski */ #include #include #include // used components #include #define TEST_COMPONENT_NAME diff_generator #define TEST_COMPONENT_NAMESPACE diagnostics::internal DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; TEST_COMPONENT_TEST_NAMESPACE_BEGIN; using namespace unittest; /** * @brief [PRO] fct/normal: testing what happens when we do not initialize * text[a|b] but want a result */ void no_init(Test_Data & test_data) { // color { Diff_Generator dg; ::std::string result; dg.diff_text(result, true); TEST_ASSERT(test_data.compare("color",result)); } // no color { Diff_Generator dg; ::std::string result; dg.diff_text(result, false); TEST_ASSERT(test_data.compare("no color",result)); } } /** * @brief [PRO] fct/normal: testing what happens when we initialize text[a|b] * with empty strings */ void init_empty(Test_Data & test_data) { // color { Diff_Generator dg; ::std::string result; dg.texta(""); dg.textb(""); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("color",result)); } // no color { Diff_Generator dg; ::std::string result; dg.texta(""); dg.textb(""); dg.diff_text(result, false); TEST_ASSERT(test_data.compare("no color",result)); } } /** * @brief [PRO] fct/normal: testing one line diffs */ void one_line(Test_Data & test_data) { // match // color { Diff_Generator dg; ::std::string result; dg.texta("This is a very intelligent text!"); dg.textb("This is a very intelligent text!"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("match color",result)); } // no color { Diff_Generator dg; ::std::string result; dg.texta("This is a very intelligent text!"); dg.textb("This is a very intelligent text!"); dg.diff_text(result, false); TEST_ASSERT(test_data.compare("match no color",result)); } // delete // color { Diff_Generator dg; ::std::string result; dg.texta("This is a very intelligent text!"); dg.textb(""); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("delete color",result)); } // no color { Diff_Generator dg; ::std::string result; dg.texta("This is a very intelligent text!"); dg.textb(""); dg.diff_text(result, false); TEST_ASSERT(test_data.compare("delete no color",result)); } // add // color { Diff_Generator dg; ::std::string result; dg.texta(""); dg.textb("This is a very intelligent text!"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("add color",result)); } // no color { Diff_Generator dg; ::std::string result; dg.texta(""); dg.textb("This is a very intelligent text!"); dg.diff_text(result, false); TEST_ASSERT(test_data.compare("add no color",result)); } } /** * @brief [PRO] fct/normal: testing multiple calls of the same diff class * instance */ void multi_call(Test_Data & test_data) { Diff_Generator dg; ::std::string result; dg.texta(""); dg.textb("This is a very intelligent text!"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("color",result)); dg.diff_text(result, false); TEST_ASSERT(test_data.compare("no color",result)); dg.texta("This is a very intelligent text!"); dg.textb(""); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("changed color",result)); dg.diff_text(result, false); TEST_ASSERT(test_data.compare("changed no color",result)); } /** * @brief [PRO] fct/normal: testing mult line diffs */ void multi_line(Test_Data & test_data) { // TEST_MEMORY_LOG_ENTER; TEST_MEMORY_BALANCE_ENTER(TYPE_TRACE); Diff_Generator dg; ::std::string result; // equal dg.texta("Row1\nRow2\nRow3\nRow4"); dg.textb("Row1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("match",result)); // added dg.texta("Row1\nRow2\nRow3\nRow4"); dg.textb("RowX\nRowX\nRow1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block added beginning",result)); dg.texta("Row1\nRow2\nRow3\nRow4"); dg.textb("Row1\nRow2\nRowX\nRowX\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block added center",result)); dg.texta("Row1\nRow2\nRow3\nRow4"); dg.textb("Row1\nRow2\nRow3\nRow4\nRowX\nRowX"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block added end",result)); // deleted dg.texta("RowX\nRowX\nRow1\nRow2\nRow3\nRow4"); dg.textb("Row1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block deleted beginning",result)); dg.texta("Row1\nRow2\nRowX\nRowX\nRow3\nRow4"); dg.textb("Row1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block deleted center",result)); dg.texta("Row1\nRow2\nRow3\nRow4\nRowX\nRowX"); dg.textb("Row1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block deleted end",result)); // changed dg.texta("RowX\nRowX\nRow1\nRow2\nRow3\nRow4"); dg.textb("RowY\nRowY\nRow1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed beginning",result)); dg.texta("Row1\nRow2\nRowX\nRowX\nRow3\nRow4"); dg.textb("Row1\nRow2\nRowY\nRowY\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed center",result)); dg.texta("Row1\nRow2\nRow3\nRow4\nRowX\nRowX"); dg.textb("Row1\nRow2\nRow3\nRow4\nRowY\nRowY"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed end",result)); // changed+added dg.texta("RowX\nRowX\nRow1\nRow2\nRow3\nRow4"); dg.textb("RowY\nRowY\nRowY\nRow1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed+added beginning",result)); dg.texta("Row1\nRow2\nRowX\nRowX\nRow3\nRow4"); dg.textb("Row1\nRow2\nRowY\nRowY\nRowY\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed+added center",result)); dg.texta("Row1\nRow2\nRow3\nRow4\nRowX\nRowX"); dg.textb("Row1\nRow2\nRow3\nRow4\nRowY\nRowY\nRowY"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed+added end",result)); // changed+deleted dg.texta("RowX\nRowX\nRowX\nRow1\nRow2\nRow3\nRow4"); dg.textb("RowY\nRowY\nRow1\nRow2\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed+deleted beginning",result)); dg.texta("Row1\nRow2\nRowX\nRowX\nRowX\nRow3\nRow4"); dg.textb("Row1\nRow2\nRowY\nRowY\nRow3\nRow4"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed+deleted center",result)); dg.texta("Row1\nRow2\nRow3\nRow4\nRowX\nRowX\nRowX"); dg.textb("Row1\nRow2\nRow3\nRow4\nRowY\nRowY"); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("block changed+deleted end",result)); TEST_MEMORY_BALANCE_EXIT; // TEST_MEMORY_LOG_EXIT; } /** * @brief [PRO] fct/normal: testing big diffs, simulating real diff */ void big_data(Test_Data & test_data) { // TEST_MEMORY_LOG_ENTER; TEST_MEMORY_BALANCE_ENTER(TYPE_TRACE); int i; Diff_Generator dg; ::std::string inputa; ::std::string inputb; ::std::string result; for(i=0; i<1000; i++)inputa += "A line\n"; inputb = inputa; dg.texta(inputa); dg.textb(inputb); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("equal",result)); inputb = "Blubbering ;)\n"; for(i=0; i<99; i++) inputb += "A line\n"; for(i=0; i<100; i++) inputb += "A different line\n"; for(i=0; i<100; i++) inputb += "A line\n"; for(i=0; i<300; i++) inputb += "A another different line\n"; for(i=0; i<150; i++) inputb += "A line\n"; inputb += "A single line added\n"; for(i=0; i<150; i++) inputb += "A line\n"; for(i=0; i<100; i++) inputb += "another lines changed\n"; dg.texta(inputa); dg.textb(inputb); dg.diff_text(result, true); TEST_ASSERT(test_data.compare("differ",result)); TEST_MEMORY_BALANCE_EXIT; // TEST_MEMORY_LOG_EXIT; } TEST_COMPONENT_TEST_NAMESPACE_END; TEST_NAMESPACE_END; INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; TEST_SUITE_BEGIN; TEST_NORMAL_CASE(&no_init,LEVEL_PROD); TEST_NORMAL_CASE(&init_empty,LEVEL_PROD); TEST_NORMAL_CASE(&one_line,LEVEL_PROD); TEST_NORMAL_CASE(&multi_call,LEVEL_PROD); TEST_NORMAL_CASE(&multi_line,LEVEL_PROD); TEST_NORMAL_CASE(&big_data,LEVEL_PROD); TEST_SUITE_END; STREAM_TEST_SYSTEM_MAIN; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_logger.ts.cpp0000644000076500000240000000333011172433107020050 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_logger.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::testing::Dummy_Logger */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; Dummy_Logger::Dummy_Logger() : m_records(), m_is_closed(0) { } void Dummy_Logger::log(Record const & record) { m_records.push_back(record); } void Dummy_Logger::close() { ++m_is_closed; } TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_logger.ts.hpp0000644000076500000240000000377311172433107020070 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_logger.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: alpha] @ref ::diagnostics::testing::Dummy_Logger * * @test none */ #ifndef DIAGNOSTICS__UTIL__DUMMY_LOGGER_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DUMMY_LOGGER_TS_HPP__INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; class Dummy_Logger : public Logger { public: typedef ::std::vector Records_t; Dummy_Logger(); virtual void log(Record const & record); virtual void close(); Records_t & records() { return m_records; } int & is_closed() { return m_is_closed; } private: Records_t m_records; int m_is_closed; }; TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_test_case.ts.cpp0000644000076500000240000000517011335632121020545 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_case.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] */ #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; Dummy_Test_Case::Dummy_Test_Case(::std::string const & name, int const timeout, bool const is_rerunable, bool const testable_at_prod, bool const testable_at_debug, bool const testable_at_audit, bool const invalid, bool const failure) : Super(name, timeout, is_rerunable, testable_at_prod, testable_at_debug, testable_at_audit), m_run_count(0), m_invalid(invalid), m_failure(failure) { } void Dummy_Test_Case::run(::diagnostics::unittest::Test_Data & test_data) const { ++m_run_count; TEST_TRACE((m_invalid ? "invalid" : "valid")); TEST_TRACE((m_failure ? "failure" : "success")); if(m_failure) DIAGNOSTICS_BASE_ASSERT(::diagnostics::LEVEL_TEST, 0,"Dummy_Test_Case which should fail",false, ((void)0)); if(m_invalid) DIAGNOSTICS_BASE_CHECK(::diagnostics::LEVEL_TEST, 0,"Dummy_Test_Case which should be invalid",false, ((void)0)); } Stupid_Test_Case::Stupid_Test_Case(::std::string const & name) : Super(name,0,true,true,true,true) { } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_test_case.ts.hpp0000644000076500000240000000510211172433107020547 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_case.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref * ::diagnostics::unittest::testing::Dummy_Test_Case and @ref * ::diagnostics::unittest::testing::Stupid_Test_Case * * @test none */ #ifndef DIAGNOSTICS__UTIL__DUMMY_TEST_CASE_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DUMMY_TEST_CASE_TS_HPP__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; class Dummy_Test_Case : public ::diagnostics::unittest::Std_Test_Case { typedef ::diagnostics::unittest::Std_Test_Case Super; public: Dummy_Test_Case(::std::string const & name, int const timeout, bool const is_rerunable, bool const testable_at_prod, bool const testable_at_debug, bool const testable_at_audit, bool const invalid=false, bool const failure=false); virtual void run(::diagnostics::unittest::Test_Data & test_data) const; inline int run_count() { return m_run_count; } private: mutable int m_run_count; bool const m_invalid; bool const m_failure; }; class Stupid_Test_Case : public Dummy_Test_Case { typedef Dummy_Test_Case Super; public: Stupid_Test_Case(::std::string const & name); }; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_test_data.ts.cpp0000644000076500000240000000461111172433107020544 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_data.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; Dummy_Test_Data::Dummy_Test_Data() { // be aware: Test_Cases depend on exactly this content... m_data["1"]="A"; m_data["2"]="B"; m_data["3"]="C"; m_data["4"]="D"; m_data["01"]="0A"; m_data["02"]="0B"; m_data["03"]="0C"; m_data["04"]="0D"; m_data["101"]="10A"; m_data["102"]="10B"; m_data["103"]="10C"; m_data["104"]="10D"; } ::std::string const & Dummy_Test_Data::get(::std::string const & id) const { Data_t::const_iterator iter(m_data.find(id)); if(iter==m_data.end()) throw Test_Exception("could not find id '" + id + "'"); return iter->second; } bool Dummy_Test_Data::compare(::std::string const & id,::std::string const & data) const { Data_t::const_iterator iter(m_data.find(id)); if(iter==m_data.end()) throw Test_Exception("could not find id '" + id + "'"); return iter->second==data; } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_test_data.ts.hpp0000644000076500000240000000415011172433107020547 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_data.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::unittest::testing::Dummy_Test_Data * * @test none */ #ifndef DIAGNOSTICS__UTIL__DUMMY_TEST_DATA_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DUMMY_TEST_DATA_TS_HPP__INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; class Dummy_Test_Data : public Test_Data { public: Dummy_Test_Data(); virtual ::std::string const & get(::std::string const & id) const; virtual bool compare(::std::string const & id,::std::string const & data) const; typedef ::std::map< ::std::string, ::std::string> Data_t; inline Data_t & data() { return m_data; } private: Data_t m_data; }; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_test_data_source.ts.cpp0000644000076500000240000000477111172433107022133 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_data_source.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] */ #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; bool Dummy_Test_Data_Source::is_initialized() const { return true; } Dummy_Test_Data_Source::Dummy_Test_Data_Source() { // be aware: Test_Cases depend on exactly this content... m_data["1"]="A"; m_data["2"]="B"; m_data["3"]="C"; m_data["4"]="D"; m_data["01"]="0A"; m_data["02"]="0B"; m_data["03"]="0C"; m_data["04"]="0D"; m_data["101"]="10A"; m_data["102"]="10B"; m_data["103"]="10C"; m_data["104"]="10D"; } bool Dummy_Test_Data_Source::exists_entry(::std::string const & id) const { return m_data.find(id)!=m_data.end(); } ::std::string const & Dummy_Test_Data_Source::get_entry(::std::string const & id) const { Data_t::const_iterator iter(m_data.find(id)); if(iter==m_data.end()) throw Test_System_Exception("could not find id '" + id + "'"); return iter->second; } void Dummy_Test_Data_Source::set_entry(::std::string const & id,::std::string const & data) { m_data[id]=data; } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_test_data_source.ts.hpp0000644000076500000240000000442211172433107022131 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_data_source.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::unittest::testing::Dummy_Test_Data_Source * * @test none */ #ifndef DIAGNOSTICS__UTIL__DUMMY_TEST_DATA_SOURCE_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DUMMY_TEST_DATA_SOURCE_TS_HPP__INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; class Dummy_Test_Data_Source : public Test_Data_Source { public: Dummy_Test_Data_Source(); virtual bool is_initialized() const; virtual bool exists_entry(::std::string const & id) const; virtual ::std::string const & get_entry(::std::string const & id) const; virtual void set_entry(::std::string const & id, ::std::string const & data); typedef ::std::map< ::std::string, ::std::string> Data_t; inline Data_t & data() { return m_data; } private: Data_t m_data; }; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_test_suite_traversal.ts.cpp0000644000076500000240000000743111172433107023052 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_suite_traversal.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] */ #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; Dummy_Test_Suite_Traversal::Dummy_Test_Suite_Traversal(::std::ostream & stream) : m_stream(stream) { } void Dummy_Test_Suite_Traversal::traverse(Test_Suite const & test_suite, ::std::string mask, Level_t const level) { m_indent=0; Super::traverse(test_suite,mask,level); } void Dummy_Test_Suite_Traversal::enter_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level) { m_stream << "ENTER: " << mask << " " << level_to_string(level) << ::std::endl; } void Dummy_Test_Suite_Traversal::exit_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level, bool const exception_going_through) { m_stream << "EXIT: " << mask << " " << level_to_string(level) << (exception_going_through ? " EXCEP" : " no EXCEP") << ::std::endl; } void Dummy_Test_Suite_Traversal::visit_hook(Test_Suite const & test_suite, Path_t const & path, Level_t const level) { m_stream << level_to_string(level) << ' '; for(int i=0;i, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_test_suite_traversal.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::unittest::testing::Dummy_Test_Suite_Traversal * * @test none */ #ifndef DIAGNOSTICS__UTIL__DUMMY_TEST_SUITE_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DUMMY_TEST_SUITE_TS_HPP__INCLUDE_GUARD #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; class Dummy_Test_Suite_Traversal : public ::diagnostics::unittest::Test_Suite_Traversal { typedef ::diagnostics::unittest::Test_Suite_Traversal Super; typedef ::diagnostics::unittest::Test_Suite Test_Suite; typedef ::diagnostics::unittest::Test_Case Test_Case; typedef ::diagnostics::Level_t Level_t; public: Dummy_Test_Suite_Traversal(::std::ostream & stream); void traverse(Test_Suite const & test_suite, ::std::string mask, Level_t const level); protected: virtual void enter_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level); virtual void exit_hook(Test_Suite const & test_suite, ::std::string const & mask, Level_t const level, bool const exception_going_through); virtual void visit_hook(Test_Suite const & test_suite, Path_t const & path, Level_t const level); virtual void leave_hook(Test_Suite const & test_suite, Path_t const & path, Level_t const level); virtual void visit_hook(Test_Case const & test_case, Path_t const & path, Level_t const level); private: ::std::ostream & m_stream; int m_indent; }; TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dummy_values_for_tid_pid.ts.hpp0000644000076500000240000000775211172433107022453 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dummy_values_for_tid_pid.ts.hpp * * $Id: dummy_values_for_tid_pid.ts.hpp,v 1.4 2005/06/23 09:54:30 esdentem Exp $ * * @author Christian Schallhart * * @brief Defines @ref * ::diagnostics::testing::Dummy_Values_For_Tid and @ref * ::diagnostics::testing::Dummy_Values_For_Pid. Both * classes define three dummy values for testing. This construction * became necessary, since some platforms use integers while others * use pointers for Tids. I added Pids since I want to handle them * symmetrically to Tids. * * @note DOCUMENTED * * @test * * @todo */ #ifndef DIAGNOSTICS__SOURCE__UTIL__DUMMY_VALUES_FOR_TID_PID_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__SOURCE__UTIL__DUMMY_VALUES_FOR_TID_PID_TS_HPP__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 INTERNAL_NAMESPACE_BEGIN; template struct Is_Pointer { enum { value=0 };}; template struct Is_Pointer { enum { value=1 };}; template struct If_Then_Else { typedef A Type_t; }; template struct If_Then_Else { typedef B Type_t; }; template struct Dummy_Values_Pointer_Base { static T const value1; static T const value2; static T const value3; }; template T const Dummy_Values_Pointer_Base::value1=NULL; template T const Dummy_Values_Pointer_Base::value2=0x00FF00FF; template T const Dummy_Values_Pointer_Base::value3=0xFF00FF00; template struct Dummy_Values_Integer_Base { static T const value1; static T const value2; static T const value3; }; template T const Dummy_Values_Integer_Base::value1=0; template T const Dummy_Values_Integer_Base::value2=10; template T const Dummy_Values_Integer_Base::value3=100; template struct Dummy_Values : public If_Then_Else< Is_Pointer::value, Dummy_Values_Pointer_Base, Dummy_Values_Integer_Base > :: Type_t { static bool const is_pointer=Is_Pointer::value; }; INTERNAL_NAMESPACE_END; /** * @brief Defines three memebers: value1, value2, and value3 of type * @ref ::diagnostics::Tid_t. They are dummy values for testing. The * member is_pointer is set to true, if Tid_t is a pointer and false * otherwise. */ typedef internal::Dummy_Values Dummy_Values_For_Tid; /** * @brief Defines three memebers: value1, value2, and value3 of type * @ref ::diagnostics::Pid_t. They are dummy values for testing. The * member is_pointer is set to true, if Pid_t is a pointer and false * otherwise. */ typedef internal::Dummy_Values Dummy_Values_For_Pid; #endif TEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dump_test_suite.ts.cpp0000644000076500000240000000440711172433107020601 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dump_test_suite.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] */ #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; ::std::string dump_test_suite(::diagnostics::unittest::Test_Suite * test_suite, ::std::string const & mask, ::diagnostics::Level_t const level) { typedef ::diagnostics::unittest::List_Test_Suite_Traversal::Test_List_Results_t Results_t; Results_t results; ::diagnostics::unittest::List_Test_Suite_Traversal trav(results); trav.traverse(*test_suite,mask,level); Results_t::const_iterator cur(results.begin()); Results_t::const_iterator const end(results.end()); ::std::ostringstream stream; for(;cur!=end;++cur) { stream << **cur << '\n'; delete *cur; } return stream.str(); } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/dump_test_suite.ts.hpp0000644000076500000240000000354311172433107020606 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/dump_test_suite.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::unittest::testing::dump_test_suite * * @test none */ #ifndef DIAGNOSTICS__UTIL__DUMP_TEST_SUITE_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__DUMP_TEST_SUITE_TS_HPP__INCLUDE_GUARD #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; ::std::string dump_test_suite(::diagnostics::unittest::Test_Suite * test_suite, ::std::string const & mask, ::diagnostics::Level_t const level); TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/from_string.hpp0000644000076500000240000000353011172433107017271 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/from_string.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::internal::from_string -- is * only used internally. Do not use directly. * * @test none */ #ifndef DIAGNOSTICS__UTIL__FROM_STRING_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__FROM_STRING_HPP__INCLUDE_GUARD #include // used in the implementation by value #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; template T from_string(::std::string const & s) { T t; ::std::istringstream is(s); is >> t; return t; } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/Makefile.am0000644000076500000240000000373511335527772016307 00000000000000# This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. include $(top_srcdir)/model.am # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libutil.la libutil_la_SOURCES = diff.cpp diff_generator.cpp marshaling.cpp diff_exception.cpp pkginclude_HEADERS = assert_record.ts.hpp blind_test_run_result.ts.hpp compilation_mode.ts.hpp diff.hpp diff_generator.hpp dummy_logger.ts.hpp dummy_test_case.ts.hpp dummy_test_data.ts.hpp dummy_test_data_source.ts.hpp dummy_test_suite_traversal.ts.hpp dummy_values_for_tid_pid.ts.hpp dump_test_suite.ts.hpp from_string.hpp marshaling.hpp preprocessor.hpp record_vectors.ts.hpp test_suites.ts.hpp to_string.hpp diff_exception.hpp check_PROGRAMS = diff diff_generator diff_SOURCES = diff.t.cpp # add additional objects required to build diff here, like # diff_LDADD = ../base/libbase.la libbla.la diff_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la libutil_ts.la diff_generator_SOURCES = diff_generator.t.cpp # add additional objects required to build diff_generator here, like # diff_generator_LDADD = ../base/libbase.la libbla.la diff_generator_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la libutil_ts.la include_diagnostics_utildir = $(includedir)/diagnostics/util include_diagnostics_util_HEADERS = diff.hpp diff_exception.hpp diff_generator.hpp from_string.hpp marshaling.hpp preprocessor.hpp to_string.hpp noinst_LTLIBRARIES += libutil_ts.la libutil_ts_la_SOURCES = blind_test_run_result.ts.cpp dummy_logger.ts.cpp dummy_test_case.ts.cpp dummy_test_data_source.ts.cpp dummy_test_data.ts.cpp dummy_test_suite_traversal.ts.cpp dump_test_suite.ts.cpp record_vectors.ts.cpp test_suites.ts.cpp TESTS = diff diff_generator diagnostics-0.3.3/diagnostics/util/Makefile.in0000644000076500000240000010364211567506172016314 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_diagnostics_util_HEADERS) \ $(pkginclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/model.am check_PROGRAMS = diff$(EXEEXT) diff_generator$(EXEEXT) TESTS = diff$(EXEEXT) diff_generator$(EXEEXT) subdir = diagnostics/util ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libutil_la_LIBADD = am_libutil_la_OBJECTS = diff.lo diff_generator.lo marshaling.lo \ diff_exception.lo libutil_la_OBJECTS = $(am_libutil_la_OBJECTS) libutil_ts_la_LIBADD = am_libutil_ts_la_OBJECTS = blind_test_run_result.ts.lo \ dummy_logger.ts.lo dummy_test_case.ts.lo \ dummy_test_data_source.ts.lo dummy_test_data.ts.lo \ dummy_test_suite_traversal.ts.lo dump_test_suite.ts.lo \ record_vectors.ts.lo test_suites.ts.lo libutil_ts_la_OBJECTS = $(am_libutil_ts_la_OBJECTS) am_diff_OBJECTS = diff.t.$(OBJEXT) diff_OBJECTS = $(am_diff_OBJECTS) diff_DEPENDENCIES = $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la libutil_ts.la am_diff_generator_OBJECTS = diff_generator.t.$(OBJEXT) diff_generator_OBJECTS = $(am_diff_generator_OBJECTS) diff_generator_DEPENDENCIES = \ $(top_builddir)/diagnostics/libdiagnostics.la \ ../unittest/test_system/libtest_system_ts.la libutil_ts.la DEFAULT_INCLUDES = depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libutil_la_SOURCES) $(libutil_ts_la_SOURCES) \ $(diff_SOURCES) $(diff_generator_SOURCES) DIST_SOURCES = $(libutil_la_SOURCES) $(libutil_ts_la_SOURCES) \ $(diff_SOURCES) $(diff_generator_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(include_diagnostics_utildir)" \ "$(DESTDIR)$(pkgincludedir)" HEADERS = $(include_diagnostics_util_HEADERS) $(pkginclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # This Makefile.am is maintained by config/update_makefiles, modifications may # get lost. You need only change and maintain the "SUBDIRS =" line and possibly # some LDADD for test cases, as directed by comments in case a test case is # detected. # Add all desired subdirectories here, like # SUBDIRS = dir1 dir2 dirX SUBDIRS = noinst_LTLIBRARIES = libutil.la libutil_ts.la libutil_la_SOURCES = diff.cpp diff_generator.cpp marshaling.cpp diff_exception.cpp pkginclude_HEADERS = assert_record.ts.hpp blind_test_run_result.ts.hpp compilation_mode.ts.hpp diff.hpp diff_generator.hpp dummy_logger.ts.hpp dummy_test_case.ts.hpp dummy_test_data.ts.hpp dummy_test_data_source.ts.hpp dummy_test_suite_traversal.ts.hpp dummy_values_for_tid_pid.ts.hpp dump_test_suite.ts.hpp from_string.hpp marshaling.hpp preprocessor.hpp record_vectors.ts.hpp test_suites.ts.hpp to_string.hpp diff_exception.hpp diff_SOURCES = diff.t.cpp # add additional objects required to build diff here, like # diff_LDADD = ../base/libbase.la libbla.la diff_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la libutil_ts.la diff_generator_SOURCES = diff_generator.t.cpp # add additional objects required to build diff_generator here, like # diff_generator_LDADD = ../base/libbase.la libbla.la diff_generator_LDADD = $(top_builddir)/diagnostics/libdiagnostics.la ../unittest/test_system/libtest_system_ts.la libutil_ts.la include_diagnostics_utildir = $(includedir)/diagnostics/util include_diagnostics_util_HEADERS = diff.hpp diff_exception.hpp diff_generator.hpp from_string.hpp marshaling.hpp preprocessor.hpp to_string.hpp libutil_ts_la_SOURCES = blind_test_run_result.ts.cpp dummy_logger.ts.cpp dummy_test_case.ts.cpp dummy_test_data_source.ts.cpp dummy_test_data.ts.cpp dummy_test_suite_traversal.ts.cpp dump_test_suite.ts.cpp record_vectors.ts.cpp test_suites.ts.cpp all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu diagnostics/util/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu diagnostics/util/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libutil.la: $(libutil_la_OBJECTS) $(libutil_la_DEPENDENCIES) $(CXXLINK) $(libutil_la_OBJECTS) $(libutil_la_LIBADD) $(LIBS) libutil_ts.la: $(libutil_ts_la_OBJECTS) $(libutil_ts_la_DEPENDENCIES) $(CXXLINK) $(libutil_ts_la_OBJECTS) $(libutil_ts_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list diff$(EXEEXT): $(diff_OBJECTS) $(diff_DEPENDENCIES) @rm -f diff$(EXEEXT) $(CXXLINK) $(diff_OBJECTS) $(diff_LDADD) $(LIBS) diff_generator$(EXEEXT): $(diff_generator_OBJECTS) $(diff_generator_DEPENDENCIES) @rm -f diff_generator$(EXEEXT) $(CXXLINK) $(diff_generator_OBJECTS) $(diff_generator_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blind_test_run_result.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diff.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diff.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diff_exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diff_generator.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diff_generator.t.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy_logger.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy_test_case.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy_test_data.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy_test_data_source.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy_test_suite_traversal.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dump_test_suite.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/marshaling.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/record_vectors.ts.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_suites.ts.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-include_diagnostics_utilHEADERS: $(include_diagnostics_util_HEADERS) @$(NORMAL_INSTALL) test -z "$(include_diagnostics_utildir)" || $(MKDIR_P) "$(DESTDIR)$(include_diagnostics_utildir)" @list='$(include_diagnostics_util_HEADERS)'; test -n "$(include_diagnostics_utildir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(include_diagnostics_utildir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(include_diagnostics_utildir)" || exit $$?; \ done uninstall-include_diagnostics_utilHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_diagnostics_util_HEADERS)'; test -n "$(include_diagnostics_utildir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(include_diagnostics_utildir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(include_diagnostics_utildir)" && rm -f $$files install-pkgincludeHEADERS: $(pkginclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ done uninstall-pkgincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(include_diagnostics_utildir)" "$(DESTDIR)$(pkgincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-include_diagnostics_utilHEADERS \ install-pkgincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-include_diagnostics_utilHEADERS \ uninstall-pkgincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ check-am ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-include_diagnostics_utilHEADERS \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgincludeHEADERS install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-include_diagnostics_utilHEADERS \ uninstall-pkgincludeHEADERS vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/diagnostics/util/marshaling.cpp0000644000076500000240000000733711335631677017106 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/marshaling.cpp * * $Id$ * * @author Christian Schallhart * * @brief implementation of read/write methods */ #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; bool read(::std::istream & stream, unsigned long & target) { unsigned char target_buf[4]; stream.read(reinterpret_cast(target_buf),4); target =static_cast(target_buf[0]) +static_cast(target_buf[1])*256 +static_cast(target_buf[2])*256*256 +static_cast(target_buf[3])*256*256*256; return stream.good(); } void write(::std::ostream & stream, unsigned long source) { unsigned char source_buf[4]; source_buf[0]=static_cast(source & 255); source>>=8; source_buf[1]=static_cast(source & 255); source>>=8; source_buf[2]=static_cast(source & 255); source>>=8; source_buf[3]=static_cast(source); stream.write(reinterpret_cast(source_buf),4); } bool read(::std::istream & stream, ::std::string & target) { // read length unsigned long length; if(!read(stream,length)) return false; // read data char * const target_buffer(new char[length]); stream.read(target_buffer,length); if(!stream.good()) { delete target_buffer; return false; } // convert target= ::std::string(target_buffer,length); delete target_buffer; return true; } void write(::std::ostream & stream, ::std::string const & source) { write(stream,static_cast(source.size())); stream.write(source.data(),static_cast< ::std::streamsize>(source.size())); } bool read(::std::istream & stream, ::std::map< ::std::string, ::std::string> & target) { unsigned long size; if(!read(stream,size)) return false; unsigned long i; for(i=0;i id_value_pair; if(!read(stream,id_value_pair.first)) return false; if(!read(stream,id_value_pair.second)) return false; target.insert(id_value_pair); } return true; } void write(::std::ostream & stream, ::std::map< ::std::string, ::std::string> const & source) { typedef ::std::map< ::std::string, ::std::string> data_t; data_t::const_iterator current(source.begin()); data_t::const_iterator const end(source.end()); write(stream,static_cast(source.size())); for(;current!=end;++current){ write(stream,current->first); write(stream,current->second); } } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/marshaling.hpp0000644000076500000240000000455411172433107017074 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/marshaling.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::internal::read and @ref * ::diagnostics::internal::write -- is only used internally. Do not * use directly. This methods are used to read and write some data * structures platform-independently. * * @test none */ #ifndef DIAGNOSTICS__UTIL__MARSHALING_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__MARSHALING_HPP__INCLUDE_GUARD #include // used in the interface by reference #include // used in the interface by reference #include // used in the interface by reference #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; bool read(::std::istream & stream, unsigned long & target); void write(::std::ostream & stream, unsigned long source); bool read(::std::istream & stream, ::std::string & target); void write(::std::ostream & stream, ::std::string const & source); bool read(::std::istream & stream, ::std::map< ::std::string, ::std::string> & target); void write(::std::ostream & stream, ::std::map< ::std::string, ::std::string> const & source); INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/preprocessor.hpp0000644000076500000240000000365411172433107017475 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/preprocessor.hpp * * $Id: util.hpp,v 1.5 2005/06/23 09:54:23 esdentem Exp $ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref DIAGNOSTICS_BASE_CONCAT and @ref * DIAGNOSTICS_BASE_STRINGIZE * * @test none */ #ifndef DIAGNOSTICS__UTIL__PREPROCESSOR__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__PREPROCESSOR__INCLUDE_GUARD #define DIAGNOSTICS_INTERNAL_BASE_CONCAT(A,B) A ## B /** * @brief evaluabes @a A and @a B and concats the respective results */ #define DIAGNOSTICS_BASE_CONCAT(A,B) DIAGNOSTICS_INTERNAL_BASE_CONCAT(A,B) #define DIAGNOSTICS_INTERNAL_BASE_STRINGIZE(A) #A /** * @brief evaluates @a A and transforms the result into a string */ #define DIAGNOSTICS_BASE_STRINGIZE(A) DIAGNOSTICS_INTERNAL_BASE_STRINGIZE(A) #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/record_vectors.ts.cpp0000644000076500000240000004735711172433107020422 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/record_vectors.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] */ #include #include #define PUSH_RECORD(STR_WHAT,LEVEL,TYPE) result.push_back(CSTR_RECORD(STR_WHAT,LEVEL,TYPE)) DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; #define PUSH_RECORD(STR_WHAT,LEVEL,TYPE) result.push_back(CSTR_RECORD(STR_WHAT,LEVEL,TYPE)) //////////////////////////////////////////////////////////////////////////////// Record_Vector* Empty_Trace_0sec_0usec::clone() const { return new Empty_Trace_0sec_0usec; } ::std::vector< ::diagnostics::Record> Empty_Trace_0sec_0usec::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("empty_test_case_0sec_0usec",LEVEL_TEST,TYPE_TESTCASE_ENTER); PUSH_RECORD("empty_test_case_0sec_0usec",LEVEL_TEST,TYPE_TESTCASE_EXIT); return result; } void Empty_Trace_0sec_0usec::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==0); TEST_ASSERT(t.invalidation_count()==0); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==0); TEST_ASSERT(t.usec()==0); #endif TEST_ASSERT(t.records().size()==2); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Empty_Trace_1sec_1usec_No_Carry::clone() const { return new Empty_Trace_1sec_1usec_No_Carry; } ::std::vector< ::diagnostics::Record> Empty_Trace_1sec_1usec_No_Carry::records() { using namespace diagnostics; ::std::vector result; result.push_back(Record(LEVEL_TEST, TYPE_TESTCASE_ENTER, 0, "empty_test_case_1sec_1usec_no_carry","base","file",1 #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 , \ ::diagnostics::testing::Dummy_Values_For_Pid::value2,\ ::diagnostics::testing::Dummy_Values_For_Tid::value3,\ 1000,10000,"host" #endif )); result.push_back(Record(LEVEL_TEST, TYPE_TESTCASE_EXIT, 0, "empty_test_case_1sec_1usec_no_carry","base","file",1 #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 ,\ ::diagnostics::testing::Dummy_Values_For_Pid::value2,\ ::diagnostics::testing::Dummy_Values_For_Tid::value3,\ 1001,10001, "host" #endif )); return result; } void Empty_Trace_1sec_1usec_No_Carry::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==0); TEST_ASSERT(t.invalidation_count()==0); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==1); TEST_ASSERT(t.usec()==1); #endif TEST_ASSERT(t.records().size()==2); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Empty_Trace_1sec_1usec_With_Carry::clone() const { return new Empty_Trace_1sec_1usec_With_Carry; } ::std::vector< ::diagnostics::Record> Empty_Trace_1sec_1usec_With_Carry::records() { using namespace diagnostics; ::std::vector result; result.push_back(Record(LEVEL_TEST, TYPE_TESTCASE_ENTER, 0, "empty_test_case_1sec_1usec_with_carry","base","file",1 #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 ,\ ::diagnostics::testing::Dummy_Values_For_Pid::value2,\ ::diagnostics::testing::Dummy_Values_For_Tid::value3,\ 1001,1000*1000-1,"host" #endif )); result.push_back(Record(LEVEL_TEST, TYPE_TESTCASE_EXIT, 0, "empty_test_case_1sec_1usec_with_carry","base","file",1 #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 ,\ ::diagnostics::testing::Dummy_Values_For_Pid::value2,\ ::diagnostics::testing::Dummy_Values_For_Tid::value3,\ 1003,0,"host" #endif )); return result; } void Empty_Trace_1sec_1usec_With_Carry::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==0); TEST_ASSERT(t.invalidation_count()==0); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==1); TEST_ASSERT(t.usec()==1); #endif TEST_ASSERT(t.records().size()==2); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_One_Failure::clone() const { return new Trace_With_One_Failure; } ::std::vector< ::diagnostics::Record> Trace_With_One_Failure::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("trace_with_one_failure",LEVEL_TEST,TYPE_TESTCASE_ENTER); PUSH_RECORD("failure",LEVEL_TEST,TYPE_FAILED_ASSERTION); PUSH_RECORD("trace_with_one_failure",LEVEL_TEST,TYPE_TESTCASE_EXIT); return result; } void Trace_With_One_Failure::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==1); TEST_ASSERT(t.invalidation_count()==0); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==0); TEST_ASSERT(t.usec()==0); #endif TEST_ASSERT(t.records().size()==3); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_One_Invalidation::clone() const { return new Trace_With_One_Invalidation; } ::std::vector< ::diagnostics::Record> Trace_With_One_Invalidation::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("trace_with_one_failure",LEVEL_TEST,TYPE_TESTCASE_ENTER); PUSH_RECORD("failed check -- invalidation",LEVEL_TEST,TYPE_FAILED_CHECK); PUSH_RECORD("trace_with_one_failure",LEVEL_TEST,TYPE_TESTCASE_EXIT); return result; } void Trace_With_One_Invalidation::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==0); TEST_ASSERT(t.invalidation_count()==1); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==0); TEST_ASSERT(t.usec()==0); #endif TEST_ASSERT(t.records().size()==3); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_One_Failed_Check::clone() const { return new Trace_With_One_Failed_Check; } ::std::vector< ::diagnostics::Record> Trace_With_One_Failed_Check::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("trace_with_one_failure",LEVEL_TEST,TYPE_TESTCASE_ENTER); PUSH_RECORD("failed check",LEVEL_AUDIT,TYPE_FAILED_CHECK); PUSH_RECORD("trace_with_one_failure",LEVEL_TEST,TYPE_TESTCASE_EXIT); return result; } void Trace_With_One_Failed_Check::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==(target_level==LEVEL_AUDIT ? 0 : 1)); TEST_ASSERT(t.invalidation_count()==0); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==0); TEST_ASSERT(t.usec()==0); #endif TEST_ASSERT(t.records().size()== (logging ? (target_level!=LEVEL_AUDIT ? 3 : 2) : 3)); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_All_Level_Type_Combinations::clone() const { return new Trace_With_All_Level_Type_Combinations; } ::std::vector< ::diagnostics::Record> Trace_With_All_Level_Type_Combinations::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("trace_with_all_level_type_combinations",LEVEL_TEST,TYPE_TESTCASE_ENTER); inner_records(result); PUSH_RECORD("trace_with_all_level_type_combinations",LEVEL_TEST,TYPE_TESTCASE_EXIT); return result; } void Trace_With_All_Level_Type_Combinations::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==(target_level==LEVEL_AUDIT ? 10 : (target_level==LEVEL_DEBUG ? 11 : 12))); TEST_ASSERT(t.invalidation_count()==1); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==0); TEST_ASSERT(t.usec()==0); #endif int level_ajust=0; // LEVEL_AUDIT if(target_level==LEVEL_DEBUG) level_ajust=1; else if(target_level==LEVEL_PROD) level_ajust=2; TEST_ASSERT(static_cast(t.records().size())== (logging ? (19+2+level_ajust) : (13*4+2))); } void Trace_With_All_Level_Type_Combinations::inner_records(::std::vector< ::diagnostics::Record> & result) { using namespace diagnostics; // reporting problems PUSH_RECORD("failed check",LEVEL_AUDIT,TYPE_FAILED_CHECK); PUSH_RECORD("failed check",LEVEL_DEBUG,TYPE_FAILED_CHECK); PUSH_RECORD("failed check",LEVEL_PROD,TYPE_FAILED_CHECK); PUSH_RECORD("failed check -- INVALIDATION",LEVEL_TEST,TYPE_FAILED_CHECK); PUSH_RECORD("failed assertion -- FAILURE",LEVEL_AUDIT,TYPE_FAILED_ASSERTION); PUSH_RECORD("failed assertion -- FAILURE",LEVEL_DEBUG,TYPE_FAILED_ASSERTION); PUSH_RECORD("failed assertion -- FAILURE",LEVEL_PROD,TYPE_FAILED_ASSERTION); PUSH_RECORD("failed assertion -- FAILURE",LEVEL_TEST,TYPE_FAILED_ASSERTION); PUSH_RECORD("unexpected exception -- FAILURE",LEVEL_AUDIT,TYPE_UNEXPECTED_EXCEPTION); PUSH_RECORD("unexpected exception -- FAILURE",LEVEL_DEBUG,TYPE_UNEXPECTED_EXCEPTION); PUSH_RECORD("unexpected exception -- FAILURE",LEVEL_PROD,TYPE_UNEXPECTED_EXCEPTION); PUSH_RECORD("unexpected exception -- FAILURE",LEVEL_TEST,TYPE_UNEXPECTED_EXCEPTION); PUSH_RECORD("wrong exception",LEVEL_AUDIT,TYPE_WRONG_EXCEPTION); PUSH_RECORD("wrong exception",LEVEL_DEBUG,TYPE_WRONG_EXCEPTION); PUSH_RECORD("wrong exception",LEVEL_PROD,TYPE_WRONG_EXCEPTION); PUSH_RECORD("wrong exception -- FAILURE",LEVEL_TEST,TYPE_WRONG_EXCEPTION); PUSH_RECORD("missing exception",LEVEL_AUDIT,TYPE_MISSING_EXCEPTION); PUSH_RECORD("missing exception",LEVEL_DEBUG,TYPE_MISSING_EXCEPTION); PUSH_RECORD("missing exception",LEVEL_PROD,TYPE_MISSING_EXCEPTION); PUSH_RECORD("missing exception -- FAILURE",LEVEL_TEST,TYPE_MISSING_EXCEPTION); // just traces PUSH_RECORD("TYPE_TRACE_BINARY",LEVEL_AUDIT,TYPE_TRACE_BINARY); PUSH_RECORD("TYPE_TRACE_BINARY",LEVEL_DEBUG,TYPE_TRACE_BINARY); PUSH_RECORD("TYPE_TRACE_BINARY",LEVEL_PROD,TYPE_TRACE_BINARY); PUSH_RECORD("TYPE_TRACE_BINARY",LEVEL_TEST,TYPE_TRACE_BINARY); PUSH_RECORD("TYPE_TRACE",LEVEL_AUDIT,TYPE_TRACE); PUSH_RECORD("TYPE_TRACE",LEVEL_DEBUG,TYPE_TRACE); PUSH_RECORD("TYPE_TRACE",LEVEL_PROD,TYPE_TRACE); PUSH_RECORD("TYPE_TRACE",LEVEL_TEST,TYPE_TRACE); // blocks PUSH_RECORD("TYPE_METHOD_ENTER",LEVEL_AUDIT,TYPE_METHOD_ENTER); PUSH_RECORD("TYPE_METHOD_ENTER",LEVEL_DEBUG,TYPE_METHOD_ENTER); PUSH_RECORD("TYPE_METHOD_ENTER",LEVEL_PROD,TYPE_METHOD_ENTER); PUSH_RECORD("TYPE_METHOD_ENTER",LEVEL_TEST,TYPE_METHOD_ENTER); PUSH_RECORD("TYPE_METHOD_EXIT",LEVEL_TEST,TYPE_METHOD_EXIT); PUSH_RECORD("TYPE_METHOD_EXIT",LEVEL_PROD,TYPE_METHOD_EXIT); PUSH_RECORD("TYPE_METHOD_EXIT",LEVEL_DEBUG,TYPE_METHOD_EXIT); PUSH_RECORD("TYPE_METHOD_EXIT",LEVEL_AUDIT,TYPE_METHOD_EXIT); PUSH_RECORD("TYPE_BLOCK_ENTER",LEVEL_AUDIT,TYPE_BLOCK_ENTER); PUSH_RECORD("TYPE_BLOCK_ENTER",LEVEL_DEBUG,TYPE_BLOCK_ENTER); PUSH_RECORD("TYPE_BLOCK_ENTER",LEVEL_PROD,TYPE_BLOCK_ENTER); PUSH_RECORD("TYPE_BLOCK_ENTER",LEVEL_TEST,TYPE_BLOCK_ENTER); PUSH_RECORD("TYPE_BLOCK_EXIT",LEVEL_TEST,TYPE_BLOCK_EXIT); PUSH_RECORD("TYPE_BLOCK_EXIT",LEVEL_PROD,TYPE_BLOCK_EXIT); PUSH_RECORD("TYPE_BLOCK_EXIT",LEVEL_DEBUG,TYPE_BLOCK_EXIT); PUSH_RECORD("TYPE_BLOCK_EXIT",LEVEL_AUDIT,TYPE_BLOCK_EXIT); PUSH_RECORD("TYPE_PROCEDURE_ENTER",LEVEL_AUDIT,TYPE_PROCEDURE_ENTER); PUSH_RECORD("TYPE_PROCEDURE_ENTER",LEVEL_DEBUG,TYPE_PROCEDURE_ENTER); PUSH_RECORD("TYPE_PROCEDURE_ENTER",LEVEL_PROD,TYPE_PROCEDURE_ENTER); PUSH_RECORD("TYPE_PROCEDURE_ENTER",LEVEL_TEST,TYPE_PROCEDURE_ENTER); PUSH_RECORD("TYPE_PROCEDURE_EXIT",LEVEL_TEST,TYPE_PROCEDURE_EXIT); PUSH_RECORD("TYPE_PROCEDURE_EXIT",LEVEL_PROD,TYPE_PROCEDURE_EXIT); PUSH_RECORD("TYPE_PROCEDURE_EXIT",LEVEL_DEBUG,TYPE_PROCEDURE_EXIT); PUSH_RECORD("TYPE_PROCEDURE_EXIT",LEVEL_AUDIT,TYPE_PROCEDURE_EXIT); PUSH_RECORD("TYPE_LOG_OPEN",LEVEL_AUDIT,TYPE_LOG_OPEN); PUSH_RECORD("TYPE_LOG_OPEN",LEVEL_DEBUG,TYPE_LOG_OPEN); PUSH_RECORD("TYPE_LOG_OPEN",LEVEL_PROD,TYPE_LOG_OPEN); PUSH_RECORD("TYPE_LOG_OPEN",LEVEL_TEST,TYPE_LOG_OPEN); PUSH_RECORD("TYPE_LOG_CLOSE",LEVEL_TEST,TYPE_LOG_CLOSE); PUSH_RECORD("TYPE_LOG_CLOSE",LEVEL_PROD,TYPE_LOG_CLOSE); PUSH_RECORD("TYPE_LOG_CLOSE",LEVEL_DEBUG,TYPE_LOG_CLOSE); PUSH_RECORD("TYPE_LOG_CLOSE",LEVEL_AUDIT,TYPE_LOG_CLOSE); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_All_Level_Type_Combinations_Times_2::clone() const { return new Trace_With_All_Level_Type_Combinations_Times_2; } ::std::vector< ::diagnostics::Record> Trace_With_All_Level_Type_Combinations_Times_2::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("trace_with_all_level_type_combinations_times_2",LEVEL_TEST,TYPE_TESTCASE_ENTER); Trace_With_All_Level_Type_Combinations::inner_records(result); Trace_With_All_Level_Type_Combinations::inner_records(result); PUSH_RECORD("trace_with_all_level_type_combinations_times_2",LEVEL_TEST,TYPE_TESTCASE_EXIT); return result; } void Trace_With_All_Level_Type_Combinations_Times_2::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==(target_level==LEVEL_AUDIT ? 10 : (target_level==LEVEL_DEBUG ? 11 : 12))*2); TEST_ASSERT(t.invalidation_count()==1*2); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==0); TEST_ASSERT(t.usec()==0); #endif int level_ajust=0; // LEVEL_AUDIT if(target_level==LEVEL_DEBUG) level_ajust=2; else if(target_level==LEVEL_PROD) level_ajust=4; TEST_ASSERT(static_cast(t.records().size())== (logging ? (38+2+level_ajust) : ((13*4)*2+2))); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_Two_Test_Case_Enter_Msgs::clone() const { return new Trace_With_Two_Test_Case_Enter_Msgs; } ::std::vector< ::diagnostics::Record> Trace_With_Two_Test_Case_Enter_Msgs::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("trace_with_two_test_case_enter_msgs",LEVEL_TEST,TYPE_TESTCASE_ENTER); PUSH_RECORD("some trace",LEVEL_TEST,TYPE_TRACE); PUSH_RECORD("trace_with_two_test_case_enter_msgs",LEVEL_TEST,TYPE_TESTCASE_ENTER); return result; } void Trace_With_Two_Test_Case_Enter_Msgs::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_INCOMPLETE); TEST_ASSERT(t.failure_count()==0); TEST_ASSERT(t.invalidation_count()==0); TEST_ASSERT(t.records().size()==2); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_No_Test_Case_Enter::clone() const { return new Trace_With_No_Test_Case_Enter; } ::std::vector< ::diagnostics::Record> Trace_With_No_Test_Case_Enter::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("some trace",LEVEL_TEST,TYPE_TRACE); return result; } void Trace_With_No_Test_Case_Enter::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_EMPTY); TEST_ASSERT(t.failure_count()==0); TEST_ASSERT(t.invalidation_count()==0); TEST_ASSERT(t.records().size()==0); } //////////////////////////////////////////////////////////////////////////////// Record_Vector* Trace_With_Two_Test_Case_Exits::clone() const { return new Trace_With_Two_Test_Case_Exits; } ::std::vector< ::diagnostics::Record> Trace_With_Two_Test_Case_Exits::records() { using namespace diagnostics; ::std::vector result; PUSH_RECORD("trace_with_all_level_type_combinations",LEVEL_TEST,TYPE_TESTCASE_ENTER); Trace_With_All_Level_Type_Combinations::inner_records(result); PUSH_RECORD("trace_with_all_level_type_combinations",LEVEL_TEST,TYPE_TESTCASE_EXIT); PUSH_RECORD("trace_with_all_level_type_combinations",LEVEL_TEST,TYPE_TESTCASE_EXIT); return result; } void Trace_With_Two_Test_Case_Exits::check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level) { using namespace diagnostics; using namespace unittest; TEST_ASSERT(t.abstract_state()==Test_Run_Result::STATE_COMPLETE); TEST_ASSERT(t.failure_count()==(target_level==LEVEL_AUDIT ? 10 : (target_level==LEVEL_DEBUG ? 11 : 12))); TEST_ASSERT(t.invalidation_count()==1); #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 TEST_ASSERT(t.sec()==0); TEST_ASSERT(t.usec()==0); #endif TEST_ASSERT(t.records().size()==(logging ? 19 : (13*4+2))); } TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/record_vectors.ts.hpp0000644000076500000240000001710111172433107020407 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/record_vectors.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] various sequences of @ref * ::diagnostics::Record s to test unittesting. * * @test none */ #ifndef DIAGNOSTICS__UTIL__RECORD_VECTORS_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__RECORD_VECTORS_TS_HPP__INCLUDE_GUARD #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; struct Record_Vector { /** * @brief returns a vector of Records. These Records are used by * other tests as sample sequences of logged records. */ virtual ::std::vector< ::diagnostics::Record> records()=0; /** * @brief checks whether a @ref Test_Run_Result @a t contains the * correct results under the assumption that it has been fed with * the records from @ref records(). @a logging has to be set to * true, iff the record sequence was filtered by a @ref * Test_Logger. @a target_level must be set to the used * target_level, i.e., it has to be equal @a t.target_level. This * is legacy, the redudency might be removed in the future. */ virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level)=0; virtual ~Record_Vector() {} virtual Record_Vector* clone() const=0; }; #if DIAGNOSTICS_SWITCH_SYSTEM_CALLS_ENABLED == 1 # define CSTR_RECORD(STR_WHAT,LEVEL,TYPE) \ Record(LEVEL, \ TYPE, \ 0, \ STR_WHAT,"base","file",1, \ ::diagnostics::testing::Dummy_Values_For_Pid::value2,\ ::diagnostics::testing::Dummy_Values_For_Tid::value3,\ 1000,10000,"host" \ ) #else # define CSTR_RECORD(STR_WHAT,LEVEL,TYPE) \ Record(LEVEL, \ TYPE, \ 0, \ STR_WHAT,"base","file",1 \ ) #endif struct Empty_Trace_0sec_0usec : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Empty_Trace_1sec_1usec_No_Carry : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Empty_Trace_1sec_1usec_With_Carry : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_One_Failure : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_One_Invalidation : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_One_Failed_Check : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_All_Level_Type_Combinations : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); static void inner_records(::std::vector< ::diagnostics::Record> & result); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_All_Level_Type_Combinations_Times_2 : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_Two_Test_Case_Enter_Msgs : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_No_Test_Case_Enter : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; //////////////////////////////////////////////////////////////////////////////// struct Trace_With_Two_Test_Case_Exits : public Record_Vector { virtual Record_Vector* clone() const; virtual ::std::vector< ::diagnostics::Record> records(); virtual void check(::diagnostics::unittest::Test_Run_Result const & t, bool const logging, Level_t const target_level); }; #undef PUSH_RECORD TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/test_suites.ts.cpp0000644000076500000240000000667111172433107017744 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/test_suites.ts.cpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] */ #include #include #include #include #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; TEST_NAMESPACE_BEGIN; ::diagnostics::unittest::Test_Suite * simple_test_suite() { using namespace diagnostics::unittest; Test_Suite *s1(new Test_Suite("S1")); s1->add(new Stupid_Test_Case("C1")); s1->add(new Stupid_Test_Case("C2")); Test_Suite * s2(new Test_Suite("S2")); s2->add(new Stupid_Test_Case("C1")); s2->add(new Stupid_Test_Case("C2")); Test_Suite * s3(new Test_Suite("S3")); s3->add(new Stupid_Test_Case("C1")); s3->add(new Stupid_Test_Case("C2")); s1->add(s2); s1->add(s3); return s1; } ::diagnostics::unittest::Test_Suite * simple_unnamed_test_suite() { using namespace diagnostics::unittest; Test_Suite *s1(new Test_Suite("")); s1->add(new Stupid_Test_Case("C1")); s1->add(new Stupid_Test_Case("C2")); Test_Suite * s2(new Test_Suite("S2")); s2->add(new Stupid_Test_Case("C1")); s2->add(new Stupid_Test_Case("C2")); Test_Suite * s3(new Test_Suite("S3")); s3->add(new Stupid_Test_Case("C1")); s3->add(new Stupid_Test_Case("C2")); s1->add(s2); s1->add(s3); return s1; } ::diagnostics::unittest::Test_Suite * test_suite_all_test_case_variations() { using namespace diagnostics::internal; using namespace diagnostics; using namespace unittest; Test_Suite *s1(new Test_Suite("S1")); Test_Suite *s2(new Test_Suite("S2")); Test_Suite *s3(new Test_Suite("S3")); s1->add(s2); s1->add(s3); int i; for(i=0;i<8;++i) { s1->add(new Dummy_Test_Case("name"+to_string(i),1,true,i&(1<add(new Dummy_Test_Case("name"+to_string(i),2,false,i&(1<add(new Dummy_Test_Case("name"+to_string(i),3,true,i&(1<, * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/test_suites.ts.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: alpha] various @ref ::diagnostics::unittest::Test_Suite s for testing * * @test none */ #ifndef DIAGNOSTICS__UTIL__TEST_SUITES_TS_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__TEST_SUITES_TS_HPP__INCLUDE_GUARD #include DIAGNOSTICS_NAMESPACE_BEGIN; UNITTEST_NAMESPACE_BEGIN; class Test_Suite; TEST_NAMESPACE_BEGIN; ::diagnostics::unittest::Test_Suite * simple_test_suite(); ::diagnostics::unittest::Test_Suite * simple_unnamed_test_suite(); ::diagnostics::unittest::Test_Suite * test_suite_all_test_case_variations(); TEST_NAMESPACE_END; UNITTEST_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/diagnostics/util/to_string.hpp0000644000076500000240000000615511172433107016756 00000000000000/* * Diagnostics - a unified framework for code annotation, logging, * program monitoring, and unit-testing. * * Copyright (C) 2009 Christian Schallhart , * Michael Tautschnig * 2008 model.in.tum.de group, FORSYTE group * 2006-2007 model.in.tum.de group * 2002-2005 Christian Schallhart * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file diagnostics/util/to_string.hpp * * $Id$ * * @author Christian Schallhart * * @brief [LEVEL: beta] @ref ::diagnostics::internal::to_string -- is * only used internally but must be available in the interface for * some inlined code. Do not use directly. * * @todo make available as part of the interface * * @test none */ #ifndef DIAGNOSTICS__UTIL__TO_STRING_HPP__INCLUDE_GUARD #define DIAGNOSTICS__UTIL__TO_STRING_HPP__INCLUDE_GUARD #include // used in the implementation by value #include DIAGNOSTICS_NAMESPACE_BEGIN; INTERNAL_NAMESPACE_BEGIN; template ::std::string to_string(T const & t) { ::std::ostringstream os; os << t; return os.str(); } template ::std::string to_string(T0 const & t0, T1 const & t1) { ::std::ostringstream os; os << t0 << t1; return os.str(); } template ::std::string to_string(T0 const & t0, T1 const & t1, T2 const & t2) { ::std::ostringstream os; os << t0 << t1 << t2; return os.str(); } template ::std::string to_string(T0 const & t0, T1 const & t1, T2 const & t2, T3 const & t3) { ::std::ostringstream os; os << t0 << t1 << t2 << t3; return os.str(); } template ::std::string to_string(T0 const & t0, T1 const & t1, T2 const & t2, T3 const & t3, T4 const & t4) { ::std::ostringstream os; os << t0 << t1 << t2 << t3 << t4; return os.str(); } template ::std::string to_string(T0 const & t0, T1 const & t1, T2 const & t2, T3 const & t3, T4 const & t4, T5 const & t5) { ::std::ostringstream os; os << t0 << t1 << t2 << t3 << t4 << t5; return os.str(); } INTERNAL_NAMESPACE_END; DIAGNOSTICS_NAMESPACE_END; #endif // vim:ts=4:sw=4 diagnostics-0.3.3/doxygen.am0000644000076500000240000001117510553745655012763 00000000000000# Copyright (C) 2004 Oren Ben-Kiki # This file is distributed under the same terms as the Automake macro files. # Generate automatic documentation using Doxygen. Goals and variables values # are controlled by the various DX_COND_??? conditionals set by autoconf. # # The provided goals are: # doxygen-doc: Generate all doxygen documentation. # doxygen-run: Run doxygen, which will generate some of the documentation # (HTML, CHM, CHI, MAN, RTF, XML) but will not do the post # processing required for the rest of it (PS, PDF, and some MAN). # doxygen-man: Rename some doxygen generated man pages. # doxygen-ps: Generate doxygen PostScript documentation. # doxygen-pdf: Generate doxygen PDF documentation. # # Note that by default these are not integrated into the automake goals. If # doxygen is used to generate man pages, you can achieve this integration by # setting man3_MANS to the list of man pages generated and then adding the # dependency: # # $(man3_MANS): doxygen-doc # # This will cause make to run doxygen and generate all the documentation. # # The following variable is intended for use in Makefile.am: # # DX_CLEANFILES = everything to clean. # # This is usually added to MOSTLYCLEANFILES. ## --------------------------------- ## ## Format-independent Doxygen rules. ## ## --------------------------------- ## if DX_COND_doc ## ------------------------------- ## ## Rules specific for HTML output. ## ## ------------------------------- ## if DX_COND_html DX_CLEAN_HTML = @DX_DOCDIR@/html endif DX_COND_html ## ------------------------------ ## ## Rules specific for CHM output. ## ## ------------------------------ ## if DX_COND_chm DX_CLEAN_CHM = @DX_DOCDIR@/chm if DX_COND_chi DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi endif DX_COND_chi endif DX_COND_chm ## ------------------------------ ## ## Rules specific for MAN output. ## ## ------------------------------ ## if DX_COND_man DX_CLEAN_MAN = @DX_DOCDIR@/man endif DX_COND_man ## ------------------------------ ## ## Rules specific for RTF output. ## ## ------------------------------ ## if DX_COND_rtf DX_CLEAN_RTF = @DX_DOCDIR@/rtf endif DX_COND_rtf ## ------------------------------ ## ## Rules specific for XML output. ## ## ------------------------------ ## if DX_COND_xml DX_CLEAN_XML = @DX_DOCDIR@/xml endif DX_COND_xml ## ----------------------------- ## ## Rules specific for PS output. ## ## ----------------------------- ## if DX_COND_ps DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps DX_PS_GOAL = doxygen-ps doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag cd @DX_DOCDIR@/latex; \ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ $(DX_LATEX) refman.tex; \ $(MAKEINDEX_PATH) refman.idx; \ $(DX_LATEX) refman.tex; \ countdown=5; \ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ refman.log > /dev/null 2>&1 \ && test $$countdown -gt 0; do \ $(DX_LATEX) refman.tex; \ countdown=`expr $$countdown - 1`; \ done; \ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi endif DX_COND_ps ## ------------------------------ ## ## Rules specific for PDF output. ## ## ------------------------------ ## if DX_COND_pdf DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf DX_PDF_GOAL = doxygen-pdf doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag cd @DX_DOCDIR@/latex; \ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ $(DX_PDFLATEX) refman.tex; \ $(DX_MAKEINDEX) refman.idx; \ $(DX_PDFLATEX) refman.tex; \ countdown=5; \ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ refman.log > /dev/null 2>&1 \ && test $$countdown -gt 0; do \ $(DX_PDFLATEX) refman.tex; \ countdown=`expr $$countdown - 1`; \ done; \ mv refman.pdf ../@PACKAGE@.pdf endif DX_COND_pdf ## ------------------------------------------------- ## ## Rules specific for LaTeX (shared for PS and PDF). ## ## ------------------------------------------------- ## if DX_COND_latex DX_CLEAN_LATEX = @DX_DOCDIR@/latex endif DX_COND_latex .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) rm -rf @DX_DOCDIR@ $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) DX_CLEANFILES = \ @DX_DOCDIR@/@PACKAGE@.tag \ -r \ $(DX_CLEAN_HTML) \ $(DX_CLEAN_CHM) \ $(DX_CLEAN_CHI) \ $(DX_CLEAN_MAN) \ $(DX_CLEAN_RTF) \ $(DX_CLEAN_XML) \ $(DX_CLEAN_PS) \ $(DX_CLEAN_PDF) \ $(DX_CLEAN_LATEX) endif DX_COND_doc diagnostics-0.3.3/INSTALL0000644000076500000240000003633211567506172012015 00000000000000Installation Instructions ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind. Basic Installation ================== Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for instructions specific to this package. Some packages provide this `INSTALL' file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. Running `configure' might take a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the `make install' phase executed with root privileges. 5. Optionally, type `make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior `make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 7. Often, you can also type `make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. 8. Some packages, particularly those that use Automake, provide `make distcheck', which can by used by developers to test that all other targets like `make install' and `make uninstall' work correctly. This target is generally not run by end users. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. This is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or "universal" binaries--by specifying multiple `-arch' options to the compiler but only a single `-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CPP="gcc -E" CXXCPP="g++ -E" This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the `lipo' tool if you have problems. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of `${prefix}', so that specifying just `--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the correct locations to `configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the `make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each affected directory. For example, `make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of `${prefix}'. Any directories that were specified during `configure', but not in terms of `${prefix}', must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool. The second method involves providing the `DESTDIR' variable. For example, `make install DESTDIR=/alternate/directory' will prepend `/alternate/directory' before all installation names. The approach of `DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of `${prefix}' at `configure' time. Optional Features ================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the execution of `make' will be. For these packages, running `./configure --enable-silent-rules' sets the default to minimal output, which can be overridden with `make V=1'; while running `./configure --disable-silent-rules' sets the default to verbose, which can be overridden with `make V=0'. Particular systems ================== On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try ./configure CC="cc" and if that doesn't work, try ./configure CC="cc -nodtk" On Solaris, don't put `/usr/ucb' early in your `PATH'. This directory contains several dysfunctional programs; working variants of these programs are available in `/usr/bin'. So, if you need `/usr/ucb' in your `PATH', put it _after_ `/usr/bin'. On Haiku, software installed for all users goes in `/boot/common', not `/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for `CONFIG_SHELL' due to an Autoconf bug. Until the bug is fixed you can use this workaround: CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of all of the options to `configure', and exit. `--help=short' `--help=recursive' Print a summary of the options unique to this package's `configure', and exit. The `short' variant lists options used only in the top level, while the `recursive' variant lists options also present in any nested packages. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--prefix=DIR' Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. `--no-create' `-n' Run the configure checks, but stop before creating any output files. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. diagnostics-0.3.3/m4/0000755000076500000240000000000011567507566011365 500000000000000diagnostics-0.3.3/m4/ac_archive.m40000644000076500000240000000664310553745655013641 00000000000000dnl see http://autoconf-archive.cryp.to/ax_prefix_config_h.html AC_DEFUN([AX_PREFIX_CONFIG_H],[AC_REQUIRE([AC_CONFIG_HEADER]) AC_CONFIG_COMMANDS([ifelse($1,,$PACKAGE-config.h,$1)],[dnl AS_VAR_PUSHDEF([_OUT],[ac_prefix_conf_OUT])dnl AS_VAR_PUSHDEF([_DEF],[ac_prefix_conf_DEF])dnl AS_VAR_PUSHDEF([_PKG],[ac_prefix_conf_PKG])dnl AS_VAR_PUSHDEF([_LOW],[ac_prefix_conf_LOW])dnl AS_VAR_PUSHDEF([_UPP],[ac_prefix_conf_UPP])dnl AS_VAR_PUSHDEF([_INP],[ac_prefix_conf_INP])dnl m4_pushdef([_script],[conftest.prefix])dnl m4_pushdef([_symbol],[m4_cr_Letters[]m4_cr_digits[]_])dnl _OUT=`printf '%s\n' ifelse($1, , $PACKAGE-config.h, $1)` _DEF=`printf '%s\n' _$_OUT | sed -e "y:m4_cr_letters:m4_cr_LETTERS[]:" -e "s/@<:@^m4_cr_Letters@:>@/_/g"` _PKG=`printf '%s\n' ifelse($2, , $PACKAGE, $2)` _LOW=`printf '%s\n' _$_PKG | sed -e "y:m4_cr_LETTERS-:m4_cr_letters[]_:"` _UPP=`printf '%s\n' $_PKG | sed -e "y:m4_cr_letters-:m4_cr_LETTERS[]_:" -e "/^@<:@m4_cr_digits@:>@/s/^/_/"` _INP=`printf '%s\n' "ifelse($3,,,$3)" | sed -e 's/ *//'` if test ".$_INP" = "."; then for ac_file in : $CONFIG_HEADERS; do test "_$ac_file" = _: && continue case "$ac_file" in *.h) _INP=$ac_file ;; *) esac test ".$_INP" != "." && break done fi if test ".$_INP" = "."; then case "$_OUT" in */*) _INP=`basename "$_OUT"` ;; *-*) _INP=`printf '%s\n' "$_OUT" | sed -e "s/@<:@_symbol@:>@*-//"` ;; *) _INP=config.h ;; esac fi if test -z "$_PKG" ; then AC_MSG_ERROR([no prefix for _PREFIX_PKG_CONFIG_H]) else if test ! -f "$_INP" ; then if test -f "$srcdir/$_INP" ; then _INP="$srcdir/$_INP" fi fi AC_MSG_NOTICE(creating $_OUT - prefix $_UPP for $_INP defines) if test -f $_INP ; then printf '%s\n' "s/@%:@undef *\\(@<:@m4_cr_LETTERS[]_@:>@\\)/@%:@undef $_UPP""_\\1/" > _script printf '%s\n' "s/@%:@undef *\\(@<:@m4_cr_letters@:>@\\)/@%:@undef $_LOW""_\\1/" >> _script printf '%s\n' "s/@%:@def[]ine *\\(@<:@m4_cr_LETTERS[]_@:>@@<:@_symbol@:>@*\\)\\(.*\\)/@%:@ifndef $_UPP""_\\1 \\" >> _script printf '%s\n' "@%:@def[]ine $_UPP""_\\1 \\2 \\" >> _script printf '%s\n' "@%:@endif/" >>_script printf '%s\n' "s/@%:@def[]ine *\\(@<:@m4_cr_letters@:>@@<:@_symbol@:>@*\\)\\(.*\\)/@%:@ifndef $_LOW""_\\1 \\" >> _script printf '%s\n' "@%:@define $_LOW""_\\1 \\2 \\" >> _script printf '%s\n' "@%:@endif/" >> _script # now executing _script on _DEF input to create _OUT output file printf '%s\n' "@%:@ifndef $_DEF" >$tmp/pconfig.h printf '%s\n' "@%:@def[]ine $_DEF 1" >>$tmp/pconfig.h printf '%s\n' ' ' >>$tmp/pconfig.h printf '%s\n' /'*' $_OUT. Generated automatically at end of configure. '*'/ >>$tmp/pconfig.h sed -f _script $_INP >>$tmp/pconfig.h printf '%s\n' ' ' >>$tmp/pconfig.h printf '%s\n' '/* once:' $_DEF '*/' >>$tmp/pconfig.h printf '%s\n' "@%:@endif" >>$tmp/pconfig.h if cmp -s $_OUT $tmp/pconfig.h 2>/dev/null; then AC_MSG_NOTICE([$_OUT is unchanged]) else ac_dir=`AS_DIRNAME(["$_OUT"])` AS_MKDIR_P(["$ac_dir"]) rm -f "$_OUT" mv $tmp/pconfig.h "$_OUT" fi cp _script _configs.sed else AC_MSG_ERROR([input file $_INP does not exist - skip generating $_OUT]) fi rm -f conftest.* fi m4_popdef([_symbol])dnl m4_popdef([_script])dnl AS_VAR_POPDEF([_INP])dnl AS_VAR_POPDEF([_UPP])dnl AS_VAR_POPDEF([_LOW])dnl AS_VAR_POPDEF([_PKG])dnl AS_VAR_POPDEF([_DEF])dnl AS_VAR_POPDEF([_OUT])dnl ],[PACKAGE="$PACKAGE"])]) diagnostics-0.3.3/m4/ac_doxygen.m40000644000076500000240000002641410553745655013673 00000000000000# This file is part of Autoconf. -*- Autoconf -*- # Copyright (C) 2004 Oren Ben-Kiki # This file is distributed under the same terms as the Autoconf macro files. # Generate automatic documentation using Doxygen. Works in concert with the # aminclude.m4 file and a compatible doxygen configuration file. Defines the # following public macros: # # DX_???_FEATURE(ON|OFF) - control the default setting fo a Doxygen feature. # Supported features are 'DOXYGEN' itself, 'DOT' for generating graphics, # 'HTML' for plain HTML, 'CHM' for compressed HTML help (for MS users), 'CHI' # for generating a seperate .chi file by the .chm file, and 'MAN', 'RTF', # 'XML', 'PDF' and 'PS' for the appropriate output formats. The environment # variable DOXYGEN_PAPER_SIZE may be specified to override the default 'a4wide' # paper size. # # By default, HTML, PDF and PS documentation is generated as this seems to be # the most popular and portable combination. MAN pages created by Doxygen are # usually problematic, though by picking an appropriate subset and doing some # massaging they might be better than nothing. CHM and RTF are specific for MS # (note that you can't generate both HTML and CHM at the same time). The XML is # rather useless unless you apply specialized post-processing to it. # # The macro mainly controls the default state of the feature. The use can # override the default by specifying --enable or --disable. The macros ensure # that contradictory flags are not given (e.g., --enable-doxygen-html and # --enable-doxygen-chm, --enable-doxygen-anything with --disable-doxygen, etc.) # Finally, each feature will be automatically disabled (with a warning) if the # required programs are missing. # # Once all the feature defaults have been specified, call DX_INIT_DOXYGEN with # the following parameters: a one-word name for the project for use as a # filename base etc., an optional configuration file name (the default is # 'Doxyfile', the same as Doxygen's default), and an optional output directory # name (the default is 'doxygen-doc'). ## ----------## ## Defaults. ## ## ----------## DX_ENV="" AC_DEFUN([DX_FEATURE_doc], ON) AC_DEFUN([DX_FEATURE_dot], ON) AC_DEFUN([DX_FEATURE_man], OFF) AC_DEFUN([DX_FEATURE_html], ON) AC_DEFUN([DX_FEATURE_chm], OFF) AC_DEFUN([DX_FEATURE_chi], OFF) AC_DEFUN([DX_FEATURE_rtf], OFF) AC_DEFUN([DX_FEATURE_xml], OFF) AC_DEFUN([DX_FEATURE_pdf], ON) AC_DEFUN([DX_FEATURE_ps], ON) ## --------------- ## ## Private macros. ## ## --------------- ## # DX_ENV_APPEND(VARIABLE, VALUE) # ------------------------------ # Append VARIABLE="VALUE" to DX_ENV for invoking doxygen. AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])]) # DX_DIRNAME_EXPR # --------------- # Expand into a shell expression prints the directory part of a path. AC_DEFUN([DX_DIRNAME_EXPR], [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']]) # DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF) # ------------------------------------- # Expands according to the M4 (static) status of the feature. AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])]) # DX_REQUIRE_PROG(VARIABLE, PROGRAM) # ---------------------------------- # Require the specified program to be found for the DX_CURRENT_FEATURE to work. AC_DEFUN([DX_REQUIRE_PROG], [ AC_PATH_TOOL([$1], [$2]) if test "$DX_FLAG_[]DX_CURRENT_FEATURE$$1" = 1; then AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION]) AC_SUBST([DX_FLAG_]DX_CURRENT_FEATURE, 0) fi ]) # DX_TEST_FEATURE(FEATURE) # ------------------------ # Expand to a shell expression testing whether the feature is active. AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1]) # DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE) # ------------------------------------------------- # Verify that a required features has the right state before trying to turn on # the DX_CURRENT_FEATURE. AC_DEFUN([DX_CHECK_DEPEND], [ test "$DX_FLAG_$1" = "$2" \ || AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1, requires, contradicts) doxygen-DX_CURRENT_FEATURE]) ]) # DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE) # ---------------------------------------------------------- # Turn off the DX_CURRENT_FEATURE if the required feature is off. AC_DEFUN([DX_CLEAR_DEPEND], [ test "$DX_FLAG_$1" = "$2" || AC_SUBST([DX_FLAG_]DX_CURRENT_FEATURE, 0) ]) # DX_FEATURE_ARG(FEATURE, DESCRIPTION, # CHECK_DEPEND, CLEAR_DEPEND, # REQUIRE, DO-IF-ON, DO-IF-OFF) # -------------------------------------------- # Parse the command-line option controlling a feature. CHECK_DEPEND is called # if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND), # otherwise CLEAR_DEPEND is called to turn off the default state if a required # feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional # requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and # DO-IF-ON or DO-IF-OFF are called according to the final state of the feature. AC_DEFUN([DX_ARG_ABLE], [ AC_DEFUN([DX_CURRENT_FEATURE], [$1]) AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2]) AC_ARG_ENABLE(doxygen-$1, [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1], [--enable-doxygen-$1]), DX_IF_FEATURE([$1], [don't $2], [$2]))], [ case "$enableval" in #( y|Y|yes|Yes|YES) AC_SUBST([DX_FLAG_$1], 1) $3 ;; #( n|N|no|No|NO) AC_SUBST([DX_FLAG_$1], 0) ;; #( *) AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1]) ;; esac ], [ AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)]) $4 ]) if DX_TEST_FEATURE([$1]); then $5 : fi if DX_TEST_FEATURE([$1]); then AM_CONDITIONAL(DX_COND_$1, :) $6 : else AM_CONDITIONAL(DX_COND_$1, false) $7 : fi ]) ## -------------- ## ## Public macros. ## ## -------------- ## # DX_XXX_FEATURE(DEFAULT_STATE) # ----------------------------- AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])]) AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])]) AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])]) AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])]) AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])]) AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])]) AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])]) AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])]) # DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR]) # --------------------------------------------------------- # PROJECT also serves as the base name for the documentation files. # The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc". AC_DEFUN([DX_INIT_DOXYGEN], [ # Files: AC_SUBST([DX_PROJECT], [$1]) AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])]) AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])]) # Environment variables used inside doxygen.cfg: DX_ENV_APPEND(SRCDIR, $srcdir) DX_ENV_APPEND(PROJECT, $DX_PROJECT) DX_ENV_APPEND(DOCDIR, $DX_DOCDIR) DX_ENV_APPEND(VERSION, $PACKAGE_VERSION) # Doxygen itself: DX_ARG_ABLE(doc, [generate any doxygen documentation], [], [], [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen) DX_REQUIRE_PROG([DX_PERL], perl)], [DX_ENV_APPEND(PERL_PATH, $DX_PERL)]) # Dot for graphics: DX_ARG_ABLE(dot, [generate graphics for doxygen documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_DOT], dot)], [DX_ENV_APPEND(HAVE_DOT, YES) DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])], [DX_ENV_APPEND(HAVE_DOT, NO)]) # Man pages generation: DX_ARG_ABLE(man, [generate doxygen manual pages], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_MAN, YES)], [DX_ENV_APPEND(GENERATE_MAN, NO)]) # RTF file generation: DX_ARG_ABLE(rtf, [generate doxygen RTF documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_RTF, YES)], [DX_ENV_APPEND(GENERATE_RTF, NO)]) # XML file generation: DX_ARG_ABLE(xml, [generate doxygen XML documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_XML, YES)], [DX_ENV_APPEND(GENERATE_XML, NO)]) # (Compressed) HTML help generation: DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_HHC], hhc)], [DX_ENV_APPEND(HHC_PATH, $DX_HHC) DX_ENV_APPEND(GENERATE_HTML, YES) DX_ENV_APPEND(GENERATE_HTMLHELP, YES)], [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)]) # Seperate CHI file generation. DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file], [DX_CHECK_DEPEND(chm, 1)], [DX_CLEAR_DEPEND(chm, 1)], [], [DX_ENV_APPEND(GENERATE_CHI, YES)], [DX_ENV_APPEND(GENERATE_CHI, NO)]) # Plain HTML pages generation: DX_ARG_ABLE(html, [generate doxygen plain HTML documentation], [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)], [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)], [], [DX_ENV_APPEND(GENERATE_HTML, YES)], [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)]) # PostScript file generation: DX_ARG_ABLE(ps, [generate doxygen PostScript documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_LATEX], latex) DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) DX_REQUIRE_PROG([DX_DVIPS], dvips) DX_REQUIRE_PROG([DX_EGREP], egrep)]) # PDF file generation: DX_ARG_ABLE(pdf, [generate doxygen PDF documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex) DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) DX_REQUIRE_PROG([DX_EGREP], egrep)]) # LaTeX generation for PS and/or PDF: if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then AM_CONDITIONAL(DX_COND_latex, :) DX_ENV_APPEND(GENERATE_LATEX, YES) else AM_CONDITIONAL(DX_COND_latex, false) DX_ENV_APPEND(GENERATE_LATEX, NO) fi # Paper size for PS and/or PDF: AC_ARG_VAR(DOXYGEN_PAPER_SIZE, [a4wide (default), a4, letter, legal or executive]) case "$DOXYGEN_PAPER_SIZE" in #( "") AC_SUBST(DOXYGEN_PAPER_SIZE, "") ;; #( a4wide|a4|letter|legal|executive) DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE) ;; #( *) AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE']) ;; esac #For debugging: #echo DX_FLAG_doc=$DX_FLAG_doc #echo DX_FLAG_dot=$DX_FLAG_dot #echo DX_FLAG_man=$DX_FLAG_man #echo DX_FLAG_html=$DX_FLAG_html #echo DX_FLAG_chm=$DX_FLAG_chm #echo DX_FLAG_chi=$DX_FLAG_chi #echo DX_FLAG_rtf=$DX_FLAG_rtf #echo DX_FLAG_xml=$DX_FLAG_xml #echo DX_FLAG_pdf=$DX_FLAG_pdf #echo DX_FLAG_ps=$DX_FLAG_ps #echo DX_ENV=$DX_ENV ]) diagnostics-0.3.3/m4/argz.m40000644000076500000240000000507111567507572012512 00000000000000# Portability macros for glibc argz. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2006, 2007 Free Software Foundation, Inc. # Written by Gary V. Vaughan # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 argz.m4 AC_DEFUN([gl_FUNC_ARGZ], [gl_PREREQ_ARGZ AC_CHECK_HEADERS([argz.h], [], [], [AC_INCLUDES_DEFAULT]) AC_CHECK_TYPES([error_t], [], [AC_DEFINE([error_t], [int], [Define to a type to use for `error_t' if it is not otherwise available.]) AC_DEFINE([__error_t_defined], [1], [Define so that glibc/gnulib argp.h does not typedef error_t.])], [#if defined(HAVE_ARGZ_H) # include #endif]) ARGZ_H= AC_CHECK_FUNCS([argz_add argz_append argz_count argz_create_sep argz_insert \ argz_next argz_stringify], [], [ARGZ_H=argz.h; AC_LIBOBJ([argz])]) dnl if have system argz functions, allow forced use of dnl libltdl-supplied implementation (and default to do so dnl on "known bad" systems). Could use a runtime check, but dnl (a) detecting malloc issues is notoriously unreliable dnl (b) only known system that declares argz functions, dnl provides them, yet they are broken, is cygwin dnl releases prior to 16-Mar-2007 (1.5.24 and earlier) dnl So, it's more straightforward simply to special case dnl this for known bad systems. AS_IF([test -z "$ARGZ_H"], [AC_CACHE_CHECK( [if argz actually works], [lt_cv_sys_argz_works], [[case $host_os in #( *cygwin*) lt_cv_sys_argz_works=no if test "$cross_compiling" != no; then lt_cv_sys_argz_works="guessing no" else lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/' save_IFS=$IFS IFS=-. set x `uname -r | sed -e "$lt_sed_extract_leading_digits"` IFS=$save_IFS lt_os_major=${2-0} lt_os_minor=${3-0} lt_os_micro=${4-0} if test "$lt_os_major" -gt 1 \ || { test "$lt_os_major" -eq 1 \ && { test "$lt_os_minor" -gt 5 \ || { test "$lt_os_minor" -eq 5 \ && test "$lt_os_micro" -gt 24; }; }; }; then lt_cv_sys_argz_works=yes fi fi ;; #( *) lt_cv_sys_argz_works=yes ;; esac]]) AS_IF([test "$lt_cv_sys_argz_works" = yes], [AC_DEFINE([HAVE_WORKING_ARGZ], 1, [This value is set to 1 to indicate that the system argz facility works])], [ARGZ_H=argz.h AC_LIBOBJ([argz])])]) AC_SUBST([ARGZ_H]) ]) # Prerequisites of lib/argz.c. AC_DEFUN([gl_PREREQ_ARGZ], [:]) diagnostics-0.3.3/m4/libtool.m40000644000076500000240000104474111567507572013223 00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010 Free Software Foundation, # Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010 Free Software Foundation, # Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 57 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # `#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test $lt_write_fail = 0 && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2010 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_REPLACE_SHELLFNS mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES # -------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test "$lt_cv_ld_force_load" = "yes"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script which will find a shell with a builtin # printf (which we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case "$ECHO" in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified).], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([${with_sysroot}]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[123]]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; haiku*) version_type=linux need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd*) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ F* | *Sun*Fortran*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS="$save_LDFLAGS"]) if test "$lt_cv_irix_exported_symbol" = yes; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], [[If ld is used when linking, flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) # ------------------------------------------------------ # In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and # '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. m4_defun([_LT_PROG_FUNCTION_REPLACE], [dnl { sed -e '/^$1 ()$/,/^} # $1 /c\ $1 ()\ {\ m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) } # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: ]) # _LT_PROG_REPLACE_SHELLFNS # ------------------------- # Replace existing portable implementations of several shell functions with # equivalent extended shell implementations where those features are available.. m4_defun([_LT_PROG_REPLACE_SHELLFNS], [if test x"$xsi_shell" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"}]) _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl func_split_long_opt_name=${1%%=*} func_split_long_opt_arg=${1#*=}]) _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) fi if test x"$lt_shell_append" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl func_quote_for_eval "${2}" dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) fi ]) # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine which file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS diagnostics-0.3.3/m4/ltdl.m40000644000076500000240000006423711567507572012517 00000000000000# ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*- # # Copyright (C) 1999-2006, 2007, 2008 Free Software Foundation, Inc. # Written by Thomas Tanner, 1999 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 18 LTDL_INIT # LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE]) # ------------------------------------------ # DIRECTORY contains the libltdl sources. It is okay to call this # function multiple times, as long as the same DIRECTORY is always given. AC_DEFUN([LT_CONFIG_LTDL_DIR], [AC_BEFORE([$0], [LTDL_INIT]) _$0($*) ])# LT_CONFIG_LTDL_DIR # We break this out into a separate macro, so that we can call it safely # internally without being caught accidentally by the sed scan in libtoolize. m4_defun([_LT_CONFIG_LTDL_DIR], [dnl remove trailing slashes m4_pushdef([_ARG_DIR], m4_bpatsubst([$1], [/*$])) m4_case(_LTDL_DIR, [], [dnl only set lt_ltdl_dir if _ARG_DIR is not simply `.' m4_if(_ARG_DIR, [.], [], [m4_define([_LTDL_DIR], _ARG_DIR) _LT_SHELL_INIT([lt_ltdl_dir=']_ARG_DIR['])])], [m4_if(_ARG_DIR, _LTDL_DIR, [], [m4_fatal([multiple libltdl directories: `]_LTDL_DIR[', `]_ARG_DIR['])])]) m4_popdef([_ARG_DIR]) ])# _LT_CONFIG_LTDL_DIR # Initialise: m4_define([_LTDL_DIR], []) # _LT_BUILD_PREFIX # ---------------- # If Autoconf is new enough, expand to `${top_build_prefix}', otherwise # to `${top_builddir}/'. m4_define([_LT_BUILD_PREFIX], [m4_ifdef([AC_AUTOCONF_VERSION], [m4_if(m4_version_compare(m4_defn([AC_AUTOCONF_VERSION]), [2.62]), [-1], [m4_ifdef([_AC_HAVE_TOP_BUILD_PREFIX], [${top_build_prefix}], [${top_builddir}/])], [${top_build_prefix}])], [${top_builddir}/])[]dnl ]) # LTDL_CONVENIENCE # ---------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-convenience to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called here. LIBLTDL will be prefixed with # '${top_build_prefix}' if available, otherwise with '${top_builddir}/', # and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single # quotes!). If your package is not flat and you're not using automake, # define top_build_prefix, top_builddir, and top_srcdir appropriately # in your Makefiles. AC_DEFUN([LTDL_CONVENIENCE], [AC_BEFORE([$0], [LTDL_INIT])dnl dnl Although the argument is deprecated and no longer documented, dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one dnl here make sure it is the same as any other declaration of libltdl's dnl location! This also ensures lt_ltdl_dir is set when configure.ac is dnl not yet using an explicit LT_CONFIG_LTDL_DIR. m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl _$0() ])# LTDL_CONVENIENCE # AC_LIBLTDL_CONVENIENCE accepted a directory argument in older libtools, # now we have LT_CONFIG_LTDL_DIR: AU_DEFUN([AC_LIBLTDL_CONVENIENCE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) _LTDL_CONVENIENCE]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBLTDL_CONVENIENCE], []) # _LTDL_CONVENIENCE # ----------------- # Code shared by LTDL_CONVENIENCE and LTDL_INIT([convenience]). m4_defun([_LTDL_CONVENIENCE], [case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la" LTDLDEPS=$LIBLTDL LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}" AC_SUBST([LIBLTDL]) AC_SUBST([LTDLDEPS]) AC_SUBST([LTDLINCL]) # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" AC_SUBST([INCLTDL]) ])# _LTDL_CONVENIENCE # LTDL_INSTALLABLE # ---------------- # sets LIBLTDL to the link flags for the libltdl installable library # and LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-install to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called from here. If an installed libltdl # is not found, LIBLTDL will be prefixed with '${top_build_prefix}' if # available, otherwise with '${top_builddir}/', and LTDLINCL will be # prefixed with '${top_srcdir}/' (note the single quotes!). If your # package is not flat and you're not using automake, define top_build_prefix, # top_builddir, and top_srcdir appropriately in your Makefiles. # In the future, this macro may have to be called after LT_INIT. AC_DEFUN([LTDL_INSTALLABLE], [AC_BEFORE([$0], [LTDL_INIT])dnl dnl Although the argument is deprecated and no longer documented, dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one dnl here make sure it is the same as any other declaration of libltdl's dnl location! This also ensures lt_ltdl_dir is set when configure.ac is dnl not yet using an explicit LT_CONFIG_LTDL_DIR. m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl _$0() ])# LTDL_INSTALLABLE # AC_LIBLTDL_INSTALLABLE accepted a directory argument in older libtools, # now we have LT_CONFIG_LTDL_DIR: AU_DEFUN([AC_LIBLTDL_INSTALLABLE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) _LTDL_INSTALLABLE]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBLTDL_INSTALLABLE], []) # _LTDL_INSTALLABLE # ----------------- # Code shared by LTDL_INSTALLABLE and LTDL_INIT([installable]). m4_defun([_LTDL_INSTALLABLE], [if test -f $prefix/lib/libltdl.la; then lt_save_LDFLAGS="$LDFLAGS" LDFLAGS="-L$prefix/lib $LDFLAGS" AC_CHECK_LIB([ltdl], [lt_dlinit], [lt_lib_ltdl=yes]) LDFLAGS="$lt_save_LDFLAGS" if test x"${lt_lib_ltdl-no}" = xyes; then if test x"$enable_ltdl_install" != xyes; then # Don't overwrite $prefix/lib/libltdl.la without --enable-ltdl-install AC_MSG_WARN([not overwriting libltdl at $prefix, force with `--enable-ltdl-install']) enable_ltdl_install=no fi elif test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) fi fi # If configure.ac declared an installable ltdl, and the user didn't override # with --disable-ltdl-install, we will install the shipped libltdl. case $enable_ltdl_install in no) ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" LTDLDEPS= LTDLINCL= ;; *) enable_ltdl_install=yes ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdl.la" LTDLDEPS=$LIBLTDL LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}" ;; esac AC_SUBST([LIBLTDL]) AC_SUBST([LTDLDEPS]) AC_SUBST([LTDLINCL]) # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" AC_SUBST([INCLTDL]) ])# LTDL_INSTALLABLE # _LTDL_MODE_DISPATCH # ------------------- m4_define([_LTDL_MODE_DISPATCH], [dnl If _LTDL_DIR is `.', then we are configuring libltdl itself: m4_if(_LTDL_DIR, [], [], dnl if _LTDL_MODE was not set already, the default value is `subproject': [m4_case(m4_default(_LTDL_MODE, [subproject]), [subproject], [AC_CONFIG_SUBDIRS(_LTDL_DIR) _LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"])], [nonrecursive], [_LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"; lt_libobj_prefix="$lt_ltdl_dir/"])], [recursive], [], [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])dnl dnl Be careful not to expand twice: m4_define([$0], []) ])# _LTDL_MODE_DISPATCH # _LT_LIBOBJ(MODULE_NAME) # ----------------------- # Like AC_LIBOBJ, except that MODULE_NAME goes into _LT_LIBOBJS instead # of into LIBOBJS. AC_DEFUN([_LT_LIBOBJ], [ m4_pattern_allow([^_LT_LIBOBJS$]) _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext" ])# _LT_LIBOBJS # LTDL_INIT([OPTIONS]) # -------------------- # Clients of libltdl can use this macro to allow the installer to # choose between a shipped copy of the ltdl sources or a preinstalled # version of the library. If the shipped ltdl sources are not in a # subdirectory named libltdl, the directory name must be given by # LT_CONFIG_LTDL_DIR. AC_DEFUN([LTDL_INIT], [dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) dnl We need to keep our own list of libobjs separate from our parent project, dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while dnl we look for our own LIBOBJs. m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ])) m4_pushdef([AC_LIBSOURCES]) dnl If not otherwise defined, default to the 1.5.x compatible subproject mode: m4_if(_LTDL_MODE, [], [m4_define([_LTDL_MODE], m4_default([$2], [subproject])) m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])], [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])]) AC_ARG_WITH([included_ltdl], [AS_HELP_STRING([--with-included-ltdl], [use the GNU ltdl sources included here])]) if test "x$with_included_ltdl" != xyes; then # We are not being forced to use the included libltdl sources, so # decide whether there is a useful installed version we can use. AC_CHECK_HEADER([ltdl.h], [AC_CHECK_DECL([lt_dlinterface_register], [AC_CHECK_LIB([ltdl], [lt_dladvise_preload], [with_included_ltdl=no], [with_included_ltdl=yes])], [with_included_ltdl=yes], [AC_INCLUDES_DEFAULT #include ])], [with_included_ltdl=yes], [AC_INCLUDES_DEFAULT] ) fi dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE dnl was called yet, then for old times' sake, we assume libltdl is in an dnl eponymous directory: AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])]) AC_ARG_WITH([ltdl_include], [AS_HELP_STRING([--with-ltdl-include=DIR], [use the ltdl headers installed in DIR])]) if test -n "$with_ltdl_include"; then if test -f "$with_ltdl_include/ltdl.h"; then : else AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include']) fi else with_ltdl_include=no fi AC_ARG_WITH([ltdl_lib], [AS_HELP_STRING([--with-ltdl-lib=DIR], [use the libltdl.la installed in DIR])]) if test -n "$with_ltdl_lib"; then if test -f "$with_ltdl_lib/libltdl.la"; then : else AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib']) fi else with_ltdl_lib=no fi case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in ,yes,no,no,) m4_case(m4_default(_LTDL_TYPE, [convenience]), [convenience], [_LTDL_CONVENIENCE], [installable], [_LTDL_INSTALLABLE], [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)]) ;; ,no,no,no,) # If the included ltdl is not to be used, then use the # preinstalled libltdl we found. AC_DEFINE([HAVE_LTDL], [1], [Define this if a modern libltdl is already installed]) LIBLTDL=-lltdl LTDLDEPS= LTDLINCL= ;; ,no*,no,*) AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together]) ;; *) with_included_ltdl=no LIBLTDL="-L$with_ltdl_lib -lltdl" LTDLDEPS= LTDLINCL="-I$with_ltdl_include" ;; esac INCLTDL="$LTDLINCL" # Report our decision... AC_MSG_CHECKING([where to find libltdl headers]) AC_MSG_RESULT([$LTDLINCL]) AC_MSG_CHECKING([where to find libltdl library]) AC_MSG_RESULT([$LIBLTDL]) _LTDL_SETUP dnl restore autoconf definition. m4_popdef([AC_LIBOBJ]) m4_popdef([AC_LIBSOURCES]) AC_CONFIG_COMMANDS_PRE([ _ltdl_libobjs= _ltdl_ltlibobjs= if test -n "$_LT_LIBOBJS"; then # Remove the extension. _lt_sed_drop_objext='s/\.o$//;s/\.obj$//' for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext" _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo" done fi AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs]) AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs]) ]) # Only expand once: m4_define([LTDL_INIT]) ])# LTDL_INIT # Old names: AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)]) AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)]) AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIB_LTDL], []) dnl AC_DEFUN([AC_WITH_LTDL], []) dnl AC_DEFUN([LT_WITH_LTDL], []) # _LTDL_SETUP # ----------- # Perform all the checks necessary for compilation of the ltdl objects # -- including compiler checks and header checks. This is a public # interface mainly for the benefit of libltdl's own configure.ac, most # other users should call LTDL_INIT instead. AC_DEFUN([_LTDL_SETUP], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_SYS_MODULE_EXT])dnl AC_REQUIRE([LT_SYS_MODULE_PATH])dnl AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl AC_REQUIRE([LT_LIB_DLLOAD])dnl AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl AC_REQUIRE([gl_FUNC_ARGZ])dnl m4_require([_LT_CHECK_OBJDIR])dnl m4_require([_LT_HEADER_DLFCN])dnl m4_require([_LT_CHECK_DLPREOPEN])dnl m4_require([_LT_DECL_SED])dnl dnl Don't require this, or it will be expanded earlier than the code dnl that sets the variables it relies on: _LT_ENABLE_INSTALL dnl _LTDL_MODE specific code must be called at least once: _LTDL_MODE_DISPATCH # In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS # the user used. This is so that ltdl.h can pick up the parent projects # config.h file, The first file in AC_CONFIG_HEADERS must contain the # definitions required by ltdl.c. # FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility). AC_CONFIG_COMMANDS_PRE([dnl m4_pattern_allow([^LT_CONFIG_H$])dnl m4_ifset([AH_HEADER], [LT_CONFIG_H=AH_HEADER], [m4_ifset([AC_LIST_HEADERS], [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[ ]]*,,;s,[[ :]].*$,,'`], [])])]) AC_SUBST([LT_CONFIG_H]) AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h], [], [], [AC_INCLUDES_DEFAULT]) AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])]) AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])]) m4_pattern_allow([LT_LIBEXT])dnl AC_DEFINE_UNQUOTED([LT_LIBEXT],["$libext"],[The archive extension]) name= eval "lt_libprefix=\"$libname_spec\"" m4_pattern_allow([LT_LIBPREFIX])dnl AC_DEFINE_UNQUOTED([LT_LIBPREFIX],["$lt_libprefix"],[The archive prefix]) name=ltdl eval "LTDLOPEN=\"$libname_spec\"" AC_SUBST([LTDLOPEN]) ])# _LTDL_SETUP # _LT_ENABLE_INSTALL # ------------------ m4_define([_LT_ENABLE_INSTALL], [AC_ARG_ENABLE([ltdl-install], [AS_HELP_STRING([--enable-ltdl-install], [install libltdl])]) case ,${enable_ltdl_install},${enable_ltdl_convenience} in *yes*) ;; *) enable_ltdl_convenience=yes ;; esac m4_ifdef([AM_CONDITIONAL], [AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno) AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)]) ])# _LT_ENABLE_INSTALL # LT_SYS_DLOPEN_DEPLIBS # --------------------- AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_CACHE_CHECK([whether deplibs are loaded by dlopen], [lt_cv_sys_dlopen_deplibs], [# PORTME does your system automatically load deplibs for dlopen? # or its logical equivalent (e.g. shl_load for HP-UX < 11) # For now, we just catch OSes we know something about -- in the # future, we'll try test this programmatically. lt_cv_sys_dlopen_deplibs=unknown case $host_os in aix3*|aix4.1.*|aix4.2.*) # Unknown whether this is true for these versions of AIX, but # we want this `case' here to explicitly catch those versions. lt_cv_sys_dlopen_deplibs=unknown ;; aix[[4-9]]*) lt_cv_sys_dlopen_deplibs=yes ;; amigaos*) case $host_cpu in powerpc) lt_cv_sys_dlopen_deplibs=no ;; esac ;; darwin*) # Assuming the user has installed a libdl from somewhere, this is true # If you are looking for one http://www.opendarwin.org/projects/dlcompat lt_cv_sys_dlopen_deplibs=yes ;; freebsd* | dragonfly*) lt_cv_sys_dlopen_deplibs=yes ;; gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu) # GNU and its variants, using gnu ld.so (Glibc) lt_cv_sys_dlopen_deplibs=yes ;; hpux10*|hpux11*) lt_cv_sys_dlopen_deplibs=yes ;; interix*) lt_cv_sys_dlopen_deplibs=yes ;; irix[[12345]]*|irix6.[[01]]*) # Catch all versions of IRIX before 6.2, and indicate that we don't # know how it worked for any of those versions. lt_cv_sys_dlopen_deplibs=unknown ;; irix*) # The case above catches anything before 6.2, and it's known that # at 6.2 and later dlopen does load deplibs. lt_cv_sys_dlopen_deplibs=yes ;; netbsd*) lt_cv_sys_dlopen_deplibs=yes ;; openbsd*) lt_cv_sys_dlopen_deplibs=yes ;; osf[[1234]]*) # dlopen did load deplibs (at least at 4.x), but until the 5.x series, # it did *not* use an RPATH in a shared library to find objects the # library depends on, so we explicitly say `no'. lt_cv_sys_dlopen_deplibs=no ;; osf5.0|osf5.0a|osf5.1) # dlopen *does* load deplibs and with the right loader patch applied # it even uses RPATH in a shared library to search for shared objects # that the library depends on, but there's no easy way to know if that # patch is installed. Since this is the case, all we can really # say is unknown -- it depends on the patch being installed. If # it is, this changes to `yes'. Without it, it would be `no'. lt_cv_sys_dlopen_deplibs=unknown ;; osf*) # the two cases above should catch all versions of osf <= 5.1. Read # the comments above for what we know about them. # At > 5.1, deplibs are loaded *and* any RPATH in a shared library # is used to find them so we can finally say `yes'. lt_cv_sys_dlopen_deplibs=yes ;; qnx*) lt_cv_sys_dlopen_deplibs=yes ;; solaris*) lt_cv_sys_dlopen_deplibs=yes ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) libltdl_cv_sys_dlopen_deplibs=yes ;; esac ]) if test "$lt_cv_sys_dlopen_deplibs" != yes; then AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1], [Define if the OS needs help to load dependent libraries for dlopen().]) fi ])# LT_SYS_DLOPEN_DEPLIBS # Old name: AU_ALIAS([AC_LTDL_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], []) # LT_SYS_MODULE_EXT # ----------------- AC_DEFUN([LT_SYS_MODULE_EXT], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl AC_CACHE_CHECK([which extension is used for runtime loadable modules], [libltdl_cv_shlibext], [ module=yes eval libltdl_cv_shlibext=$shrext_cmds ]) if test -n "$libltdl_cv_shlibext"; then m4_pattern_allow([LT_MODULE_EXT])dnl AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"], [Define to the extension used for runtime loadable modules, say, ".so".]) fi ])# LT_SYS_MODULE_EXT # Old name: AU_ALIAS([AC_LTDL_SHLIBEXT], [LT_SYS_MODULE_EXT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_SHLIBEXT], []) # LT_SYS_MODULE_PATH # ------------------ AC_DEFUN([LT_SYS_MODULE_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl AC_CACHE_CHECK([which variable specifies run-time module search path], [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"]) if test -n "$lt_cv_module_path_var"; then m4_pattern_allow([LT_MODULE_PATH_VAR])dnl AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"], [Define to the name of the environment variable that determines the run-time module search path.]) fi ])# LT_SYS_MODULE_PATH # Old name: AU_ALIAS([AC_LTDL_SHLIBPATH], [LT_SYS_MODULE_PATH]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_SHLIBPATH], []) # LT_SYS_DLSEARCH_PATH # -------------------- AC_DEFUN([LT_SYS_DLSEARCH_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl AC_CACHE_CHECK([for the default library search path], [lt_cv_sys_dlsearch_path], [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"]) if test -n "$lt_cv_sys_dlsearch_path"; then sys_dlsearch_path= for dir in $lt_cv_sys_dlsearch_path; do if test -z "$sys_dlsearch_path"; then sys_dlsearch_path="$dir" else sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir" fi done m4_pattern_allow([LT_DLSEARCH_PATH])dnl AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"], [Define to the system default library search path.]) fi ])# LT_SYS_DLSEARCH_PATH # Old name: AU_ALIAS([AC_LTDL_SYSSEARCHPATH], [LT_SYS_DLSEARCH_PATH]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_SYSSEARCHPATH], []) # _LT_CHECK_DLPREOPEN # ------------------- m4_defun([_LT_CHECK_DLPREOPEN], [m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen], [libltdl_cv_preloaded_symbols], [if test -n "$lt_cv_sys_global_symbol_pipe"; then libltdl_cv_preloaded_symbols=yes else libltdl_cv_preloaded_symbols=no fi ]) if test x"$libltdl_cv_preloaded_symbols" = xyes; then AC_DEFINE([HAVE_PRELOADED_SYMBOLS], [1], [Define if libtool can extract symbol lists from object files.]) fi ])# _LT_CHECK_DLPREOPEN # LT_LIB_DLLOAD # ------------- AC_DEFUN([LT_LIB_DLLOAD], [m4_pattern_allow([^LT_DLLOADERS$]) LT_DLLOADERS= AC_SUBST([LT_DLLOADERS]) AC_LANG_PUSH([C]) LIBADD_DLOPEN= AC_SEARCH_LIBS([dlopen], [dl], [AC_DEFINE([HAVE_LIBDL], [1], [Define if you have the libdl library or equivalent.]) if test "$ac_cv_search_dlopen" != "none required" ; then LIBADD_DLOPEN="-ldl" fi libltdl_cv_lib_dl_dlopen="yes" LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H # include #endif ]], [[dlopen(0, 0);]])], [AC_DEFINE([HAVE_LIBDL], [1], [Define if you have the libdl library or equivalent.]) libltdl_cv_func_dlopen="yes" LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], [AC_CHECK_LIB([svld], [dlopen], [AC_DEFINE([HAVE_LIBDL], [1], [Define if you have the libdl library or equivalent.]) LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes" LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])]) if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes then lt_save_LIBS="$LIBS" LIBS="$LIBS $LIBADD_DLOPEN" AC_CHECK_FUNCS([dlerror]) LIBS="$lt_save_LIBS" fi AC_SUBST([LIBADD_DLOPEN]) LIBADD_SHL_LOAD= AC_CHECK_FUNC([shl_load], [AC_DEFINE([HAVE_SHL_LOAD], [1], [Define if you have the shl_load function.]) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"], [AC_CHECK_LIB([dld], [shl_load], [AC_DEFINE([HAVE_SHL_LOAD], [1], [Define if you have the shl_load function.]) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la" LIBADD_SHL_LOAD="-ldld"])]) AC_SUBST([LIBADD_SHL_LOAD]) case $host_os in darwin[[1567]].*) # We only want this for pre-Mac OS X 10.4. AC_CHECK_FUNC([_dyld_func_lookup], [AC_DEFINE([HAVE_DYLD], [1], [Define if you have the _dyld_func_lookup function.]) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"]) ;; beos*) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la" ;; cygwin* | mingw* | os2* | pw32*) AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include ]]) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la" ;; esac AC_CHECK_LIB([dld], [dld_link], [AC_DEFINE([HAVE_DLD], [1], [Define if you have the GNU dld library.]) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"]) AC_SUBST([LIBADD_DLD_LINK]) m4_pattern_allow([^LT_DLPREOPEN$]) LT_DLPREOPEN= if test -n "$LT_DLLOADERS" then for lt_loader in $LT_DLLOADERS; do LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader " done AC_DEFINE([HAVE_LIBDLLOADER], [1], [Define if libdlloader will be built on this platform]) fi AC_SUBST([LT_DLPREOPEN]) dnl This isn't used anymore, but set it for backwards compatibility LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD" AC_SUBST([LIBADD_DL]) AC_LANG_POP ])# LT_LIB_DLLOAD # Old name: AU_ALIAS([AC_LTDL_DLLIB], [LT_LIB_DLLOAD]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_DLLIB], []) # LT_SYS_SYMBOL_USCORE # -------------------- # does the compiler prefix global symbols with an underscore? AC_DEFUN([LT_SYS_SYMBOL_USCORE], [m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl AC_CACHE_CHECK([for _ prefix in compiled symbols], [lt_cv_sys_symbol_underscore], [lt_cv_sys_symbol_underscore=no cat > conftest.$ac_ext <<_LT_EOF void nm_test_func(){} int main(){nm_test_func;return 0;} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. ac_nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then # See whether the symbols have a leading underscore. if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then lt_cv_sys_symbol_underscore=yes else if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then : else echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD fi fi else echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.c >&AS_MESSAGE_LOG_FD fi rm -rf conftest* ]) sys_symbol_underscore=$lt_cv_sys_symbol_underscore AC_SUBST([sys_symbol_underscore]) ])# LT_SYS_SYMBOL_USCORE # Old name: AU_ALIAS([AC_LTDL_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_SYMBOL_USCORE], []) # LT_FUNC_DLSYM_USCORE # -------------------- AC_DEFUN([LT_FUNC_DLSYM_USCORE], [AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl if test x"$lt_cv_sys_symbol_underscore" = xyes; then if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then AC_CACHE_CHECK([whether we have to add an underscore for dlsym], [libltdl_cv_need_uscore], [libltdl_cv_need_uscore=unknown save_LIBS="$LIBS" LIBS="$LIBS $LIBADD_DLOPEN" _LT_TRY_DLOPEN_SELF( [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes], [], [libltdl_cv_need_uscore=cross]) LIBS="$save_LIBS" ]) fi fi if test x"$libltdl_cv_need_uscore" = xyes; then AC_DEFINE([NEED_USCORE], [1], [Define if dlsym() requires a leading underscore in symbol names.]) fi ])# LT_FUNC_DLSYM_USCORE # Old name: AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], []) diagnostics-0.3.3/m4/ltoptions.m40000644000076500000240000002725611567507572013613 00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, # Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 7 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) diagnostics-0.3.3/m4/ltsugar.m40000644000076500000240000001042411567507572013226 00000000000000# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) diagnostics-0.3.3/m4/ltversion.m40000644000076500000240000000125611567507572013575 00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 3293 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4]) m4_define([LT_PACKAGE_REVISION], [1.3293]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4' macro_revision='1.3293' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) diagnostics-0.3.3/m4/lt~obsolete.m40000644000076500000240000001375611567507572014132 00000000000000# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diagnostics-0.3.3/Makefile.am0000644000076500000240000000320711335527773013016 00000000000000include $(top_srcdir)/model.am # add further subdirectories here SUBDIRS = . diagnostics # just a hint for autoproject # _SOURCES = model.am ChangeLog NEWS README ACLOCAL_AMFLAGS = -I m4 include $(top_srcdir)/doxygen.am AUX_DIST = $(ac_aux_dir)/config.guess $(ac_aux_dir)/config.sub $(ac_aux_dir)/install-sh $(ac_aux_dir)/ltmain.sh $(ac_aux_dir)/missing $(ac_aux_dir)/depcomp m4/libtool.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4 m4/ltdl.m4 m4/argz.m4 EXTRA_DIST = $(DX_CONFIG) debian test/test.dat config/runtest.sh MAINTAINERCLEANFILES += aclocal.m4 configure config.h.in $(AUX_DIST) # add features.h here, like # DISTCLEANFILES = config.h.in~ _configs.sed shared/config/features.h DISTCLEANFILES = config.h.in~ _configs.sed diagnostics/features.hpp \ test/blub.dat test/file_test_data_source.testfile test/file_test_data_source.testfile2 \ test/diagnostic.log test/file_logger.log test/result.log test/result_log_file maintainer-clean-local: $(RM) -rf $(DX_DOCDIR) $(RM) -rf build/audit/* build/debug/* -dh_clean rm -f config.guess config.sub build-stamp debian/substvars dist-hook: (cd $(distdir) && mkdir -p $(ac_aux_dir)) for file in $(AUX_DIST) $(AUX_DIST_EXTRA) ; do cp $$file $(distdir)/$$file ; done rm -rf `find $(distdir)/debian -name .svn` rm -f $(distdir)/diagnostics/features.hpp # add the source directories here, like # $(top_srcdir)/config/update-makefiles @enable_install_headers@ @disable_update_makefiles@ main/ shared/ all-local: if test -f $(top_srcdir)/config/update-makefiles ; then \ $(top_srcdir)/config/update-makefiles @enable_install_headers@ @disable_update_makefiles@ diagnostics/ ; fi diagnostics-0.3.3/Makefile.in0000644000076500000240000010105511567506172013024 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright (C) 2004 Oren Ben-Kiki # This file is distributed under the same terms as the Automake macro files. # Generate automatic documentation using Doxygen. Goals and variables values # are controlled by the various DX_COND_??? conditionals set by autoconf. # # The provided goals are: # doxygen-doc: Generate all doxygen documentation. # doxygen-run: Run doxygen, which will generate some of the documentation # (HTML, CHM, CHI, MAN, RTF, XML) but will not do the post # processing required for the rest of it (PS, PDF, and some MAN). # doxygen-man: Rename some doxygen generated man pages. # doxygen-ps: Generate doxygen PostScript documentation. # doxygen-pdf: Generate doxygen PDF documentation. # # Note that by default these are not integrated into the automake goals. If # doxygen is used to generate man pages, you can achieve this integration by # setting man3_MANS to the list of man pages generated and then adding the # dependency: # # $(man3_MANS): doxygen-doc # # This will cause make to run doxygen and generate all the documentation. # # The following variable is intended for use in Makefile.am: # # DX_CLEANFILES = everything to clean. # # This is usually added to MOSTLYCLEANFILES. pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/configure $(top_srcdir)/doxygen.am \ $(top_srcdir)/model.am AUTHORS COPYING ChangeLog INSTALL NEWS \ TODO config/config.guess config/config.sub config/depcomp \ config/install-sh config/ltmain.sh config/missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_archive.m4 \ $(top_srcdir)/m4/ac_doxygen.m4 $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print VPATH = ACE_CFLAGS = @ACE_CFLAGS@ ACE_LIBS = @ACE_LIBS@ ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARGZ_H = @ARGZ_H@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIAGNOSTICSLEVEL = @DIAGNOSTICSLEVEL@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INCLTDL = @INCLTDL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBADD_DL = @LIBADD_DL@ LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ LIBADD_DLOPEN = @LIBADD_DLOPEN@ LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ LIBLTDL = @LIBLTDL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTDLDEPS = @LTDLDEPS@ LTDLINCL = @LTDLINCL@ LTDLOPEN = @LTDLOPEN@ LTLIBOBJS = @LTLIBOBJS@ LT_CONFIG_H = @LT_CONFIG_H@ LT_DLLOADERS = @LT_DLLOADERS@ LT_DLPREOPEN = @LT_DLPREOPEN@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG = @PKGCONFIG@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_aux_dir = @ac_aux_dir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ disable_update_makefiles = @disable_update_makefiles@ docdir = @docdir@ dvidir = @dvidir@ enable_install_headers = @enable_install_headers@ enable_stacktrace = @enable_stacktrace@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ ltdl_LIBOBJS = @ltdl_LIBOBJS@ ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sys_symbol_underscore = @sys_symbol_underscore@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) MAINTAINERCLEANFILES = Makefile.in aclocal.m4 configure config.h.in \ $(AUX_DIST) MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) # add further subdirectories here SUBDIRS = . diagnostics # just a hint for autoproject # _SOURCES = model.am ChangeLog NEWS README ACLOCAL_AMFLAGS = -I m4 @DX_COND_doc_TRUE@@DX_COND_html_TRUE@DX_CLEAN_HTML = @DX_DOCDIR@/html @DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHM = @DX_DOCDIR@/chm @DX_COND_chi_TRUE@@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi @DX_COND_doc_TRUE@@DX_COND_man_TRUE@DX_CLEAN_MAN = @DX_DOCDIR@/man @DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@DX_CLEAN_RTF = @DX_DOCDIR@/rtf @DX_COND_doc_TRUE@@DX_COND_xml_TRUE@DX_CLEAN_XML = @DX_DOCDIR@/xml @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_PS_GOAL = doxygen-ps @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_PDF_GOAL = doxygen-pdf @DX_COND_doc_TRUE@@DX_COND_latex_TRUE@DX_CLEAN_LATEX = @DX_DOCDIR@/latex @DX_COND_doc_TRUE@DX_CLEANFILES = \ @DX_COND_doc_TRUE@ @DX_DOCDIR@/@PACKAGE@.tag \ @DX_COND_doc_TRUE@ -r \ @DX_COND_doc_TRUE@ $(DX_CLEAN_HTML) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_CHM) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_CHI) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_MAN) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_RTF) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_XML) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_PS) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_PDF) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_LATEX) AUX_DIST = $(ac_aux_dir)/config.guess $(ac_aux_dir)/config.sub $(ac_aux_dir)/install-sh $(ac_aux_dir)/ltmain.sh $(ac_aux_dir)/missing $(ac_aux_dir)/depcomp m4/libtool.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4 m4/ltdl.m4 m4/argz.m4 EXTRA_DIST = $(DX_CONFIG) debian test/test.dat config/runtest.sh # add features.h here, like # DISTCLEANFILES = config.h.in~ _configs.sed shared/config/features.h DISTCLEANFILES = config.h.in~ _configs.sed diagnostics/features.hpp \ test/blub.dat test/file_test_data_source.testfile test/file_test_data_source.testfile2 \ test/diagnostic.log test/file_logger.log test/result.log test/result_log_file all: $(BUILT_SOURCES) config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/model.am $(top_srcdir)/doxygen.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile config.h all-local installdirs: installdirs-recursive installdirs-am: install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ ctags-recursive install install-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am all-local am--refresh check check-am clean \ clean-generic clean-libtool ctags ctags-recursive dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzma dist-shar \ dist-tarZ dist-xz dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic \ maintainer-clean-local mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ cd @DX_DOCDIR@/latex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(MAKEINDEX_PATH) refman.idx; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=5; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ refman.log > /dev/null 2>&1 \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ && test $$countdown -gt 0; do \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=`expr $$countdown - 1`; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ done; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ cd @DX_DOCDIR@/latex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_MAKEINDEX) refman.idx; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=5; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ refman.log > /dev/null 2>&1 \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ && test $$countdown -gt 0; do \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=`expr $$countdown - 1`; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ done; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ mv refman.pdf ../@PACKAGE@.pdf @DX_COND_doc_TRUE@.PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) @DX_COND_doc_TRUE@ rm -rf @DX_DOCDIR@ @DX_COND_doc_TRUE@ $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) maintainer-clean-local: $(RM) -rf $(DX_DOCDIR) $(RM) -rf build/audit/* build/debug/* -dh_clean rm -f config.guess config.sub build-stamp debian/substvars dist-hook: (cd $(distdir) && mkdir -p $(ac_aux_dir)) for file in $(AUX_DIST) $(AUX_DIST_EXTRA) ; do cp $$file $(distdir)/$$file ; done rm -rf `find $(distdir)/debian -name .svn` rm -f $(distdir)/diagnostics/features.hpp # add the source directories here, like # $(top_srcdir)/config/update-makefiles @enable_install_headers@ @disable_update_makefiles@ main/ shared/ all-local: if test -f $(top_srcdir)/config/update-makefiles ; then \ $(top_srcdir)/config/update-makefiles @enable_install_headers@ @disable_update_makefiles@ diagnostics/ ; fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diagnostics-0.3.3/model.am0000644000076500000240000000354711335527773012410 00000000000000VPATH = vpath %.cpp $(srcdir) vpath %.cc $(srcdir) vpath %.c $(srcdir) vpath %.hpp $(srcdir) vpath %.hh $(srcdir) vpath %.h $(srcdir) DIAGNOSTICSLEVEL ?= @DIAGNOSTICSLEVEL@ TESTS_ENVIRONMENT = $(top_srcdir)/config/runtest.sh $(top_srcdir) $(DIAGNOSTICSLEVEL) AM_CPPFLAGS = -I$(top_srcdir) -DDEBUG__LEVEL__=$(DIAGNOSTICSLEVEL) $(top_builddir)/diagnostics/libdiagnostics.la: cd $(top_builddir)/diagnostics ; $(MAKE) $(AM_MAKEFLAGS) MAINTAINERCLEANFILES = Makefile.in MOSTLYCLEANFILES = diag_stamp_* level_suffix = $(strip $(DIAGNOSTICSLEVEL:-1=_1)) BUILT_SOURCES = diag_stamp_$(level_suffix) diag_stamp_$(level_suffix): -rm -f *.$(OBJEXT) *.lo *.la -rm -f diag_stamp_* touch diag_stamp_$(level_suffix) debug audit debug-check audit-check: CXXFLAGS += -g debug audit debug-check audit-check: test -f $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'`/Makefile || \ ( debug_num=1 ; audit_num=2 ; \ mkdir -p $(top_srcdir)/build ; \ mkdir -p $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ cd $(top_srcdir) ; test -f config.status && mv config.status config.status.top || : ; \ cd build/`echo $@ | @AWK@ -F- '{print $$1}'` ; \ mode_num=`echo $@ | gawk -F- '{print $$1}'`_num ; \ ../../configure --disable-update-makefiles DIAGNOSTICSLEVEL=$${!mode_num} ; \ cd ../../ ; test -f config.status.top && mv config.status.top config.status || : ) cd $(top_srcdir)/build/`echo $@ | @AWK@ -F- '{print $$1}'``pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) CXXFLAGS="$(CXXFLAGS)" `echo $@ | @AWK@ -F- '{print $$2}'` prod prod-check: test -f $(top_srcdir)/Makefile || \ ( cd $(top_srcdir) ; ./configure --disable-update-makefiles DIAGNOSTICSLEVEL=0 ) cd $(top_srcdir)/`pwd | sed "s|^\`cd $(top_builddir) > /dev/null; pwd\`||"` && \ $(MAKE) $(AM_MAKEFLAGS) `echo $@ | @AWK@ -F- '{print $$2}'` diagnostics-0.3.3/NEWS0000644000076500000240000000000010553745655011447 00000000000000diagnostics-0.3.3/README0000644000076500000240000000050510553745655011642 00000000000000Build instructions ================== Run ./build_all Once this has been run, a complete cleanup is done by make maintainer-clean Then, build_all must be run again. Otherwise, a simple make rebuilds all outdated parts. The documentation may be built using make doxygen-doc and is then found in doc/dx/ diagnostics-0.3.3/test/0000755000076500000240000000000011567507566012024 500000000000000diagnostics-0.3.3/test/test.dat0000644000076500000240000067130311377500566013417 00000000000000cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc2/Filter_Test_Data/fct/normal/filtering//Filter: ''$0A 0B 0C 0D A 10A 10B 10C 10D B C D 3/Filter_Test_Data/fct/normal/filtering//Filter: '1'A 10A 10B 10C 10D 4/Filter_Test_Data/fct/normal/filtering//Filter: '10'10A 10B 10C 10D 3/Filter_Test_Data/fct/normal/filtering//Filter: 'X'7/Level/fct/normal/test_level_to_string//all conversionsPRO DEB AUD TES SYS UNK V/List_Test_Suite_Traversal/fct/normal/dump_and_traverse_simple_test_suite_twice//twice 0 REPEAT AUD DEB PRO /S1/C1 0 REPEAT AUD DEB PRO /S1/C2 0 REPEAT AUD DEB PRO /S1/S2/C1 0 REPEAT AUD DEB PRO /S1/S2/C2 0 REPEAT AUD DEB PRO /S1/S3/C1 0 REPEAT AUD DEB PRO /S1/S3/C2 0 REPEAT AUD DEB PRO /S1/C1 0 REPEAT AUD DEB PRO /S1/C2 0 REPEAT AUD DEB PRO /S1/S2/C1 0 REPEAT AUD DEB PRO /S1/S2/C2 0 REPEAT AUD DEB PRO /S1/S3/C1 0 REPEAT AUD DEB PRO /S1/S3/C2 ?/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A 0 REPEAT AUD DEB PRO /S1/C1 0 REPEAT AUD DEB PRO /S1/C2 0 REPEAT AUD DEB PRO /S1/S2/C1 0 REPEAT AUD DEB PRO /S1/S2/C2 0 REPEAT AUD DEB PRO /S1/S3/C1 0 REPEAT AUD DEB PRO /S1/S3/C2 A/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A-A 0 REPEAT AUD DEB PRO /S1/C1 0 REPEAT AUD DEB PRO /S1/C2 0 REPEAT AUD DEB PRO /S1/S2/C1 0 REPEAT AUD DEB PRO /S1/S2/C2 0 REPEAT AUD DEB PRO /S1/S3/C1 0 REPEAT AUD DEB PRO /S1/S3/C2 C/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A-A-A 0 REPEAT AUD DEB PRO /S1/S2/C1 0 REPEAT AUD DEB PRO /S1/S2/C2 0 REPEAT AUD DEB PRO /S1/S3/C1 0 REPEAT AUD DEB PRO /S1/S3/C2 D/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A-A-C1D 0 REPEAT AUD DEB PRO /S1/S2/C1 0 REPEAT AUD DEB PRO /S1/S3/C1 D/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A-A-C2D 0 REPEAT AUD DEB PRO /S1/S2/C2 0 REPEAT AUD DEB PRO /S1/S3/C2 B/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A-C1 0 REPEAT AUD DEB PRO /S1/C1 D/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A-S2-AD 0 REPEAT AUD DEB PRO /S1/S2/C1 0 REPEAT AUD DEB PRO /S1/S2/C2 D/List_Test_Suite_Traversal/fct/normal/dump_simple_test_suite//A-S3-AD 0 REPEAT AUD DEB PRO /S1/S3/C1 0 REPEAT AUD DEB PRO /S1/S3/C2 G/List_Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//A 0 REPEAT AUD DEB PRO /C1 0 REPEAT AUD DEB PRO /C2 0 REPEAT AUD DEB PRO /S2/C1 0 REPEAT AUD DEB PRO /S2/C2 0 REPEAT AUD DEB PRO /S3/C1 0 REPEAT AUD DEB PRO /S3/C2 Q/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A` 1 REPEAT /S1/name0 1 REPEAT PRO /S1/name1 1 REPEAT DEB /S1/name2 1 REPEAT DEB PRO /S1/name3 1 REPEAT AUD /S1/name4 1 REPEAT AUD PRO /S1/name5 1 REPEAT AUD DEB /S1/name6 1 REPEAT AUD DEB PRO /S1/name7 2 SINGLE /S1/S2/name0 2 SINGLE PRO /S1/S2/name1 2 SINGLE DEB /S1/S2/name2 2 SINGLE DEB PRO /S1/S2/name3 2 SINGLE AUD /S1/S2/name4 2 SINGLE AUD PRO /S1/S2/name5 2 SINGLE AUD DEB /S1/S2/name6 2 SINGLE AUD DEB PRO /S1/S2/name7 3 REPEAT /S1/S3/name0 3 REPEAT PRO /S1/S3/name1 3 REPEAT DEB /S1/S3/name2 3 REPEAT DEB PRO /S1/S3/name3 3 REPEAT AUD /S1/S3/name4 3 REPEAT AUD PRO /S1/S3/name5 3 REPEAT AUD DEB /S1/S3/name6 3 REPEAT AUD DEB PRO /S1/S3/name7 S/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A-A` 1 REPEAT /S1/name0 1 REPEAT PRO /S1/name1 1 REPEAT DEB /S1/name2 1 REPEAT DEB PRO /S1/name3 1 REPEAT AUD /S1/name4 1 REPEAT AUD PRO /S1/name5 1 REPEAT AUD DEB /S1/name6 1 REPEAT AUD DEB PRO /S1/name7 2 SINGLE /S1/S2/name0 2 SINGLE PRO /S1/S2/name1 2 SINGLE DEB /S1/S2/name2 2 SINGLE DEB PRO /S1/S2/name3 2 SINGLE AUD /S1/S2/name4 2 SINGLE AUD PRO /S1/S2/name5 2 SINGLE AUD DEB /S1/S2/name6 2 SINGLE AUD DEB PRO /S1/S2/name7 3 REPEAT /S1/S3/name0 3 REPEAT PRO /S1/S3/name1 3 REPEAT DEB /S1/S3/name2 3 REPEAT DEB PRO /S1/S3/name3 3 REPEAT AUD /S1/S3/name4 3 REPEAT AUD PRO /S1/S3/name5 3 REPEAT AUD DEB /S1/S3/name6 3 REPEAT AUD DEB PRO /S1/S3/name7 U/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A-A-AP 2 SINGLE /S1/S2/name0 2 SINGLE PRO /S1/S2/name1 2 SINGLE DEB /S1/S2/name2 2 SINGLE DEB PRO /S1/S2/name3 2 SINGLE AUD /S1/S2/name4 2 SINGLE AUD PRO /S1/S2/name5 2 SINGLE AUD DEB /S1/S2/name6 2 SINGLE AUD DEB PRO /S1/S2/name7 3 REPEAT /S1/S3/name0 3 REPEAT PRO /S1/S3/name1 3 REPEAT DEB /S1/S3/name2 3 REPEAT DEB PRO /S1/S3/name3 3 REPEAT AUD /S1/S3/name4 3 REPEAT AUD PRO /S1/S3/name5 3 REPEAT AUD DEB /S1/S3/name6 3 REPEAT AUD DEB PRO /S1/S3/name7 Y/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A-A-name2J 2 SINGLE DEB /S1/S2/name2 3 REPEAT DEB /S1/S3/name2 Y/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A-A-name3J 2 SINGLE DEB PRO /S1/S2/name3 3 REPEAT DEB PRO /S1/S3/name3 V/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A-S2-A( 2 SINGLE /S1/S2/name0 2 SINGLE PRO /S1/S2/name1 2 SINGLE DEB /S1/S2/name2 2 SINGLE DEB PRO /S1/S2/name3 2 SINGLE AUD /S1/S2/name4 2 SINGLE AUD PRO /S1/S2/name5 2 SINGLE AUD DEB /S1/S2/name6 2 SINGLE AUD DEB PRO /S1/S2/name7 V/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A-S3-A( 3 REPEAT /S1/S3/name0 3 REPEAT PRO /S1/S3/name1 3 REPEAT DEB /S1/S3/name2 3 REPEAT DEB PRO /S1/S3/name3 3 REPEAT AUD /S1/S3/name4 3 REPEAT AUD PRO /S1/S3/name5 3 REPEAT AUD DEB /S1/S3/name6 3 REPEAT AUD DEB PRO /S1/S3/name7 W/List_Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//A-name2" 1 REPEAT DEB /S1/name2 +/Record/fct/normal/stream_operator//nosysr1(TES testcase_enter 0 what [base file 1] +/Record/fct/normal/stream_operator//nosysr2*AUD testcase_exit 1 what1 [base1 file1 2] +/Record/fct/normal/stream_operator//sysiir17TES testcase_enter 0 what [base file 1] 10/100/4-5 host+/Record/fct/normal/stream_operator//sysiir2:AUD testcase_exit 1 what1 [base1 file1 2] 100/10/5-6 host1I/Stream_Test_Data_Adaptor/fct/normal/get_compare_mode_interactive//output MISSING ENTRY: ID='DOES NOT EXIST' -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Possible entries: 'a': Accept the difference and save. 'r': Reject the difference and do not save. Proceed? [a|r]: Rejecting. Data will not be saved to the database. MISSING ENTRY: ID='DOES NOT EXIST' -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Possible entries: 'a': Accept the difference and save. 'r': Reject the difference and do not save. Proceed? [a|r]: Rejecting. Data will not be saved to the database. MISSING ENTRY: ID='DOES NOT EXIST' -------------------------------------------------------------------------------- bla -------------------------------------------------------------------------------- Possible entries: 'a': Accept the difference and save. 'r': Reject the difference and do not save. Proceed? [a|r]: Rejecting. Data will not be saved to the database. MISSMATCHING ENTRY: ID='1' Diff: -------------------------------------------------------------------------------- -A +AA  -------------------------------------------------------------------------------- Possible entries: 'a': Accept the difference and save. 'r': Reject the difference and do not save. 'o': Print the old output. 'n': Print the new output. 'd': Print the diff between the old and new output Proceed? [a|r|o|n|d]: Rejecting. Data will not be saved to the database. MISSING ENTRY: ID='DOES NOT EXIST YET' -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Possible entries: 'a': Accept the difference and save. 'r': Reject the difference and do not save. Proceed? [a|r]: Accepting. As soon as you quit data will be saved to the database. MISSMATCHING ENTRY: ID='DOES NOT EXIST YET' Diff: -------------------------------------------------------------------------------- +bla  -------------------------------------------------------------------------------- Possible entries: 'a': Accept the difference and save. 'r': Reject the difference and do not save. 'o': Print the old output. 'n': Print the new output. 'd': Print the diff between the old and new output Proceed? [a|r|o|n|d]: Rejecting. Data will not be saved to the database. MISSMATCHING ENTRY: ID='DOES NOT EXIST YET' Diff: -------------------------------------------------------------------------------- +bla  -------------------------------------------------------------------------------- Possible entries: 'a': Accept the difference and save. 'r': Reject the difference and do not save. 'o': Print the old output. 'n': Print the new output. 'd': Print the diff between the old and new output Proceed? [a|r|o|n|d]: Accepting. As soon as you quit data will be saved to the database. E/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 0XX ******************************************************************************** Started LIST with mask /* and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /* and level PRO TOTAL 1 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 0 repeatedXX ******************************************************************************** Started LIST with mask /* and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /* and level PRO TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /* and level PRO TOTAL 1 ******************************************************************************** E/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 1XX ******************************************************************************** Started LIST with mask /* and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level DEB TOTAL 2 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 1 repeatedXX ******************************************************************************** Started LIST with mask /* and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level DEB TOTAL 2 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level DEB TOTAL 2 ******************************************************************************** E/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 2XX ******************************************************************************** Started LIST with mask /* and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level AUD TOTAL 2 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 2 repeatedXX ******************************************************************************** Started LIST with mask /* and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level AUD TOTAL 2 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level AUD TOTAL 2 ******************************************************************************** E/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 3XX ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /* 3 repeatedXX ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** H/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /noop 3XX ******************************************************************************** Started LIST with mask /noop and level TES -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /noop and level TES TOTAL 0 ******************************************************************************** Q/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /noop 3 repeated\XX ******************************************************************************** Started LIST with mask /noop and level TES -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /noop and level TES TOTAL 0 ******************************************************************************** ******************************************************************************** Started LIST with mask /noop and level TES -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /noop and level TES TOTAL 0 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 0XX ******************************************************************************** Started LIST with mask /test_case_1 and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level PRO TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 0 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level PRO TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level PRO TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 1XX ******************************************************************************** Started LIST with mask /test_case_1 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level DEB TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 1 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level DEB TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level DEB TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 2XX ******************************************************************************** Started LIST with mask /test_case_1 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level AUD TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 2 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level AUD TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level AUD TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 3XX ******************************************************************************** Started LIST with mask /test_case_1 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level TES TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_1 3 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level TES TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level TES TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 0XX ******************************************************************************** Started LIST with mask /test_case_2 and level PRO -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level PRO TOTAL 0 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 0 repeatedxXX ******************************************************************************** Started LIST with mask /test_case_2 and level PRO -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level PRO TOTAL 0 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level PRO -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level PRO TOTAL 0 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 1XX ******************************************************************************** Started LIST with mask /test_case_2 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level DEB TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 1 repeatedXX ******************************************************************************** Started LIST with mask /test_case_2 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level DEB TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level DEB TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 2XX ******************************************************************************** Started LIST with mask /test_case_2 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level AUD TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 2 repeatedXX ******************************************************************************** Started LIST with mask /test_case_2 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level AUD TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level AUD TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 3XX ******************************************************************************** Started LIST with mask /test_case_2 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level TES TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//nosyslist /test_case_2 3 repeatedXX ******************************************************************************** Started LIST with mask /test_case_2 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level TES TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level TES TOTAL 1 ******************************************************************************** D/Stream_Test_System/fct/normal/calling_by_commandline//nosysrun /* 1eXX ******************************************************************************** Started RUN with mask /* and level DEB with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level DEB with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** M/Stream_Test_System/fct/normal/calling_by_commandline//nosysrun /* 1 repeatedXX ******************************************************************************** Started RUN with mask /* and level DEB with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level DEB with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** ******************************************************************************** Started RUN with mask /* and level DEB with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level DEB with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** D/Stream_Test_System/fct/normal/calling_by_commandline//nosysrun /* 3eXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** M/Stream_Test_System/fct/normal/calling_by_commandline//nosysrun /* 3 repeatedXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** E/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 0XX ******************************************************************************** Started LIST with mask /* and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /* and level PRO TOTAL 1 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 0 repeatedXX ******************************************************************************** Started LIST with mask /* and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /* and level PRO TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /* and level PRO TOTAL 1 ******************************************************************************** E/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 1XX ******************************************************************************** Started LIST with mask /* and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level DEB TOTAL 2 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 1 repeatedXX ******************************************************************************** Started LIST with mask /* and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level DEB TOTAL 2 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level DEB TOTAL 2 ******************************************************************************** E/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 2XX ******************************************************************************** Started LIST with mask /* and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level AUD TOTAL 2 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 2 repeatedXX ******************************************************************************** Started LIST with mask /* and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level AUD TOTAL 2 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level AUD TOTAL 2 ******************************************************************************** E/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 3XX ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** N/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /* 3 repeatedXX ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** H/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /noop 3XX ******************************************************************************** Started LIST with mask /noop and level TES -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /noop and level TES TOTAL 0 ******************************************************************************** Q/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /noop 3 repeated\XX ******************************************************************************** Started LIST with mask /noop and level TES -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /noop and level TES TOTAL 0 ******************************************************************************** ******************************************************************************** Started LIST with mask /noop and level TES -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /noop and level TES TOTAL 0 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 0XX ******************************************************************************** Started LIST with mask /test_case_1 and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level PRO TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 0 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level PRO TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level PRO -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level PRO TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 1XX ******************************************************************************** Started LIST with mask /test_case_1 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level DEB TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 1 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level DEB TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level DEB TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 2XX ******************************************************************************** Started LIST with mask /test_case_1 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level AUD TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 2 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level AUD TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level AUD TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 3XX ******************************************************************************** Started LIST with mask /test_case_1 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level TES TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_1 3 repeatedXX ******************************************************************************** Started LIST with mask /test_case_1 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level TES TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_1 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_1 and level TES TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 0XX ******************************************************************************** Started LIST with mask /test_case_2 and level PRO -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level PRO TOTAL 0 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 0 repeatedxXX ******************************************************************************** Started LIST with mask /test_case_2 and level PRO -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level PRO TOTAL 0 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level PRO -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level PRO TOTAL 0 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 1XX ******************************************************************************** Started LIST with mask /test_case_2 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level DEB TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 1 repeatedXX ******************************************************************************** Started LIST with mask /test_case_2 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level DEB TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level DEB -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level DEB TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 2XX ******************************************************************************** Started LIST with mask /test_case_2 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level AUD TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 2 repeatedXX ******************************************************************************** Started LIST with mask /test_case_2 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level AUD TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level AUD -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level AUD TOTAL 1 ******************************************************************************** O/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 3XX ******************************************************************************** Started LIST with mask /test_case_2 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level TES TOTAL 1 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline//sysiilist /test_case_2 3 repeatedXX ******************************************************************************** Started LIST with mask /test_case_2 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level TES TOTAL 1 ******************************************************************************** ******************************************************************************** Started LIST with mask /test_case_2 and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /test_case_2 and level TES TOTAL 1 ******************************************************************************** D/Stream_Test_System/fct/normal/calling_by_commandline//sysiirun /* 1uXX ******************************************************************************** Started RUN with mask /* and level DEB with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level DEB with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** M/Stream_Test_System/fct/normal/calling_by_commandline//sysiirun /* 1 repeatedXX ******************************************************************************** Started RUN with mask /* and level DEB with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level DEB with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** ******************************************************************************** Started RUN with mask /* and level DEB with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level DEB with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** D/Stream_Test_System/fct/normal/calling_by_commandline//sysiirun /* 3uXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** M/Stream_Test_System/fct/normal/calling_by_commandline//sysiirun /* 3 repeatedXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** Y/Stream_Test_System/fct/normal/calling_by_commandline_return_value//nosysinvalid failure XX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: invalid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (1 failure(s) occured, too) Test_Run_Result: CASE="/test_case_2" (build: DEB target: PRO) trace [TES]: invalid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (1 failure(s) occured, too) -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 0 ( 0%) FAILURES 0 ( 0%) INVALIDATIONS 2 (100%) TOTAL 2 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline_return_value//nosysinvalid successXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: invalid trace [TES]: success FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) Test_Run_Result: CASE="/test_case_2" (build: DEB target: PRO) trace [TES]: invalid trace [TES]: success FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 0 ( 0%) FAILURES 0 ( 0%) INVALIDATIONS 2 (100%) TOTAL 2 ******************************************************************************** W/Stream_Test_System/fct/normal/calling_by_commandline_return_value//nosysvalid failure kXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED: 1 failure(s) counted. Test_Run_Result: CASE="/test_case_2" (build: DEB target: PRO) trace [TES]: valid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED: 1 failure(s) counted. -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 0 ( 0%) FAILURES 2 (100%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** V/Stream_Test_System/fct/normal/calling_by_commandline_return_value//nosysvalid successeXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** Y/Stream_Test_System/fct/normal/calling_by_commandline_return_value//sysiiinvalid failure XX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: invalid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (1 failure(s) occured, too) Test_Run_Result XX CASE="/test_case_2" (build: DEB target: PRO) in XX trace [TES]: invalid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (1 failure(s) occured, too) -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 0 ( 0%) FAILURES 0 ( 0%) INVALIDATIONS 2 (100%) TOTAL 2 ******************************************************************************** X/Stream_Test_System/fct/normal/calling_by_commandline_return_value//sysiiinvalid successXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: invalid trace [TES]: success FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) Test_Run_Result XX CASE="/test_case_2" (build: DEB target: PRO) in XX trace [TES]: invalid trace [TES]: success FAILED_CHECK (INVALIDATION) [TES]: Dummy_Test_Case which should be invalid [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 78] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 0 ( 0%) FAILURES 0 ( 0%) INVALIDATIONS 2 (100%) TOTAL 2 ******************************************************************************** W/Stream_Test_System/fct/normal/calling_by_commandline_return_value//sysiivalid failure {XX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED: 1 failure(s) counted. Test_Run_Result XX CASE="/test_case_2" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: failure FAILED_ASSERTION [TES]: Dummy_Test_Case which should fail [dummy_test_case.ts.cpp dummy_test_case.ts.cpp 73] FAILED: 1 failure(s) counted. -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 0 ( 0%) FAILURES 2 (100%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** V/Stream_Test_System/fct/normal/calling_by_commandline_return_value//sysiivalid successuXX ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** J/Stream_Test_System/fct/normal/calling_by_interactively//nosysinteractive1SXXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > > > > ******************************************************************************** Started RUN with mask /test_case_1 and level PRO with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /test_case_1 and level PRO with build Level DEB in test application NAME SUCCESS 1 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 1 ******************************************************************************** > ******************************************************************************** Started RUN with mask /test_case_2 and level PRO with build Level DEB in test application NAME -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished RUN with mask /test_case_2 and level PRO with build Level DEB in test application NAME SUCCESS 0 (100%) FAILURES 0 (100%) INVALIDATIONS 0 (100%) TOTAL 0 ******************************************************************************** > ******************************************************************************** Started RUN with mask /* and level PRO with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level PRO with build Level DEB in test application NAME SUCCESS 1 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 1 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//nosysinteractive2iXXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//nosysinteractive3XXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > Commands: run list interactive quit > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//nosysinteractive4$XXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > An Test_System_Exception occured: Level 'UNK' failed to one of PRO,DEB,AUD, or TES > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//nosysinteractive5XXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > An Test_System_Exception occured: Invalid mask '/*h' > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result: CASE="/test_case_1" (build: DEB target: PRO) trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result: CASE="/test_case_2" (build: DEB target: DEB) trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//sysiiinteractive1sXXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > > > > ******************************************************************************** Started RUN with mask /test_case_1 and level PRO with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /test_case_1 and level PRO with build Level DEB in test application NAME SUCCESS 1 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 1 ******************************************************************************** > ******************************************************************************** Started RUN with mask /test_case_2 and level PRO with build Level DEB in test application NAME -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Finished RUN with mask /test_case_2 and level PRO with build Level DEB in test application NAME SUCCESS 0 (100%) FAILURES 0 (100%) INVALIDATIONS 0 (100%) TOTAL 0 ******************************************************************************** > ******************************************************************************** Started RUN with mask /* and level PRO with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level PRO with build Level DEB in test application NAME SUCCESS 1 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 1 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//sysiiinteractive2iXXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//sysiiinteractive3*XXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > Commands: run list interactive quit > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//sysiiinteractive44XXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > An Test_System_Exception occured: Level 'UNK' failed to one of PRO,DEB,AUD, or TES > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > J/Stream_Test_System/fct/normal/calling_by_interactively//sysiiinteractive5XXTest Data is taken from: test/blub.dat Result Log is writen to: test/result_log_file Build Level : DEB > ******************************************************************************** Started LIST with mask /* and level TES -------------------------------------------------------------------------------- 3 REPEAT AUD DEB PRO /test_case_1 3 REPEAT AUD DEB /test_case_2 -------------------------------------------------------------------------------- Finished LIST with mask /* and level TES TOTAL 2 ******************************************************************************** > An Test_System_Exception occured: Invalid mask '/*h' > ******************************************************************************** Started RUN with mask /* and level TES with build Level DEB in test application NAME -------------------------------------------------------------------------------- Test_Run_Result XX CASE="/test_case_1" (build: DEB target: PRO) in XX trace [TES]: valid trace [TES]: success SUCCEEDED Test_Run_Result XX CASE="/test_case_2" (build: DEB target: DEB) in XX trace [TES]: valid trace [TES]: success SUCCEEDED -------------------------------------------------------------------------------- Finished RUN with mask /* and level TES with build Level DEB in test application NAME SUCCESS 2 (100%) FAILURES 0 ( 0%) INVALIDATIONS 0 ( 0%) TOTAL 2 ******************************************************************************** > D/Test_Case_Cstr/fct/abnormal/erronous_composition_attempts//list_all 3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(1) 3 REPEAT AUD /test_suite/fct/normal/Test_Function_Object(2) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) 3 REPEAT AUD /test_suite/fct/abnormal/Test_Function_Object(5) 10 REPEAT PRO /test_suite/nonfct/Test_Function_Object(6) 7/Test_Case_Cstr/fct/normal/normal_composition//list_all 3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(1) 3 REPEAT AUD /test_suite/fct/normal/Test_Function_Object(2) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) 3 REPEAT AUD /test_suite/fct/abnormal/Test_Function_Object(5) 10 REPEAT PRO /test_suite/nonfct/Test_Function_Object(6) @/Test_Case_Cstr/fct/normal/normal_composition//list_all_expanded 3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(1) 3 REPEAT AUD /test_suite/fct/normal/Test_Function_Object(2) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(6) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) 3 REPEAT AUD /test_suite/fct/abnormal/Test_Function_Object(5) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(0) 10 REPEAT PRO /test_suite/nonfct/Test_Function_Object(6) 0 REPEAT PRO /test_suite/nonfct/Test_Function_Object(3) 9/Test_Case_Cstr/fct/normal/normal_composition//list_audit 3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(1) 3 REPEAT AUD /test_suite/fct/normal/Test_Function_Object(2) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) 3 REPEAT AUD /test_suite/fct/abnormal/Test_Function_Object(5) 9/Test_Case_Cstr/fct/normal/normal_composition//list_debug  3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(1) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) 7/Test_Case_Cstr/fct/normal/normal_composition//list_fct 3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(1) 3 REPEAT AUD /test_suite/fct/normal/Test_Function_Object(2) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) 3 REPEAT AUD /test_suite/fct/abnormal/Test_Function_Object(5) @/Test_Case_Cstr/fct/normal/normal_composition//list_fct_abnormal 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) 3 REPEAT AUD /test_suite/fct/abnormal/Test_Function_Object(5) D/Test_Case_Cstr/fct/normal/normal_composition//list_fct_abnormal_deb 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 3 REPEAT AUD DEB /test_suite/fct/abnormal/Test_Function_Object(4) >/Test_Case_Cstr/fct/normal/normal_composition//list_fct_normal 3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB /test_suite/fct/normal/Test_Function_Object(1) 3 REPEAT AUD /test_suite/fct/normal/Test_Function_Object(2) :/Test_Case_Cstr/fct/normal/normal_composition//list_nonfctC 10 REPEAT PRO /test_suite/nonfct/Test_Function_Object(6) >/Test_Case_Cstr/fct/normal/normal_composition//list_nonfct_deb8/Test_Case_Cstr/fct/normal/normal_composition//list_prod 3 REPEAT AUD DEB PRO /test_suite/fct/normal/Test_Function_Object(0) 3 REPEAT AUD DEB PRO /test_suite/fct/abnormal/Test_Function_Object(3) 10 REPEAT PRO /test_suite/nonfct/Test_Function_Object(6) 8/Test_List_Result/fct/normal/cstr_copy_assign_compare//t 2 REPEAT AUD DEB PRO /path9/Test_List_Result/fct/normal/cstr_copy_assign_compare//t2 0 SINGLE AUD DEB PRO /path19/Test_List_Result/fct/normal/cstr_copy_assign_compare//t3 0 SINGLE AUD PRO /path1j/Test_Run_Result/fct/abnormal/Incorrect_Trace_Processing(new Trace_With_No_Test_Case_Enter())//nosysresult6Test_Run_Result: STATE_EMPTY (build: PRO target: PRO) j/Test_Run_Result/fct/abnormal/Incorrect_Trace_Processing(new Trace_With_No_Test_Case_Enter())//sysiiresult6Test_Run_Result: STATE_EMPTY (build: PRO target: PRO) p/Test_Run_Result/fct/abnormal/Incorrect_Trace_Processing(new Trace_With_Two_Test_Case_Enter_Msgs())//nosysresultyTest_Run_Result: trace_with_two_test_case_enter_msgs (build: PRO target: PRO) STATE_INCOMPLETE trace [TES]: some trace p/Test_Run_Result/fct/abnormal/Incorrect_Trace_Processing(new Trace_With_Two_Test_Case_Enter_Msgs())//sysiiresultTest_Run_Result [host 10/100]: trace_with_two_test_case_enter_msgs (build: PRO target: PRO) STATE_INCOMPLETE trace [TES]: some trace k/Test_Run_Result/fct/abnormal/Incorrect_Trace_Processing(new Trace_With_Two_Test_Case_Exits())//nosysresults Test_Run_Result: trace_with_all_level_type_combinations (build: PRO target: PRO) FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (12 failure(s) occured, too) k/Test_Run_Result/fct/abnormal/Incorrect_Trace_Processing(new Trace_With_Two_Test_Case_Exits())//sysiiresult Test_Run_Result [host 10/100]: trace_with_all_level_type_combinations (build: PRO target: PRO) in 0.000000 secs FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (12 failure(s) occured, too) c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_0sec_0usec())//nosysresult-AUDPTest_Run_Result: empty_test_case_0sec_0usec (build: AUD target: AUD) SUCCEEDED c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_0sec_0usec())//nosysresult-DEBPTest_Run_Result: empty_test_case_0sec_0usec (build: AUD target: DEB) SUCCEEDED c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_0sec_0usec())//nosysresult-PROPTest_Run_Result: empty_test_case_0sec_0usec (build: AUD target: PRO) SUCCEEDED c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_0sec_0usec())//sysiiresult-AUDoTest_Run_Result [host 10/100]: empty_test_case_0sec_0usec (build: AUD target: AUD) in 0.000000 secs SUCCEEDED c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_0sec_0usec())//sysiiresult-DEBoTest_Run_Result [host 10/100]: empty_test_case_0sec_0usec (build: AUD target: DEB) in 0.000000 secs SUCCEEDED c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_0sec_0usec())//sysiiresult-PROoTest_Run_Result [host 10/100]: empty_test_case_0sec_0usec (build: AUD target: PRO) in 0.000000 secs SUCCEEDED l/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_No_Carry())//nosysresult-AUDYTest_Run_Result: empty_test_case_1sec_1usec_no_carry (build: AUD target: AUD) SUCCEEDED l/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_No_Carry())//nosysresult-DEBYTest_Run_Result: empty_test_case_1sec_1usec_no_carry (build: AUD target: DEB) SUCCEEDED l/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_No_Carry())//nosysresult-PROYTest_Run_Result: empty_test_case_1sec_1usec_no_carry (build: AUD target: PRO) SUCCEEDED l/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_No_Carry())//sysiiresult-AUDxTest_Run_Result [host 10/100]: empty_test_case_1sec_1usec_no_carry (build: AUD target: AUD) in 1.000001 secs SUCCEEDED l/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_No_Carry())//sysiiresult-DEBxTest_Run_Result [host 10/100]: empty_test_case_1sec_1usec_no_carry (build: AUD target: DEB) in 1.000001 secs SUCCEEDED l/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_No_Carry())//sysiiresult-PROxTest_Run_Result [host 10/100]: empty_test_case_1sec_1usec_no_carry (build: AUD target: PRO) in 1.000001 secs SUCCEEDED n/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_With_Carry())//nosysresult-AUD[Test_Run_Result: empty_test_case_1sec_1usec_with_carry (build: AUD target: AUD) SUCCEEDED n/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_With_Carry())//nosysresult-DEB[Test_Run_Result: empty_test_case_1sec_1usec_with_carry (build: AUD target: DEB) SUCCEEDED n/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_With_Carry())//nosysresult-PRO[Test_Run_Result: empty_test_case_1sec_1usec_with_carry (build: AUD target: PRO) SUCCEEDED n/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_With_Carry())//sysiiresult-AUDzTest_Run_Result [host 10/100]: empty_test_case_1sec_1usec_with_carry (build: AUD target: AUD) in 1.000001 secs SUCCEEDED n/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_With_Carry())//sysiiresult-DEBzTest_Run_Result [host 10/100]: empty_test_case_1sec_1usec_with_carry (build: AUD target: DEB) in 1.000001 secs SUCCEEDED n/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Empty_Trace_1sec_1usec_With_Carry())//sysiiresult-PROzTest_Run_Result [host 10/100]: empty_test_case_1sec_1usec_with_carry (build: AUD target: PRO) in 1.000001 secs SUCCEEDED s/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations())//nosysresult-AUD_ Test_Run_Result: trace_with_all_level_type_combinations (build: AUD target: AUD) failed_check [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (10 failure(s) occured, too) s/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations())//nosysresult-DEBi Test_Run_Result: trace_with_all_level_type_combinations (build: AUD target: DEB) FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (11 failure(s) occured, too) s/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations())//nosysresult-PROs Test_Run_Result: trace_with_all_level_type_combinations (build: AUD target: PRO) FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (12 failure(s) occured, too) s/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations())//sysiiresult-AUD~ Test_Run_Result [host 10/100]: trace_with_all_level_type_combinations (build: AUD target: AUD) in 0.000000 secs failed_check [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (10 failure(s) occured, too) s/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations())//sysiiresult-DEB Test_Run_Result [host 10/100]: trace_with_all_level_type_combinations (build: AUD target: DEB) in 0.000000 secs FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (11 failure(s) occured, too) s/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations())//sysiiresult-PRO Test_Run_Result [host 10/100]: trace_with_all_level_type_combinations (build: AUD target: PRO) in 0.000000 secs FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 1 invalidation(s) counted (12 failure(s) occured, too) {/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations_Times_2())//nosysresult-AUD4Test_Run_Result: trace_with_all_level_type_combinations_times_2 (build: AUD target: AUD) failed_check [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT failed_check [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 2 invalidation(s) counted (20 failure(s) occured, too) {/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations_Times_2())//nosysresult-DEBHTest_Run_Result: trace_with_all_level_type_combinations_times_2 (build: AUD target: DEB) FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 2 invalidation(s) counted (22 failure(s) occured, too) {/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations_Times_2())//nosysresult-PRO\Test_Run_Result: trace_with_all_level_type_combinations_times_2 (build: AUD target: PRO) FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 2 invalidation(s) counted (24 failure(s) occured, too) {/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations_Times_2())//sysiiresult-AUDSTest_Run_Result [host 10/100]: trace_with_all_level_type_combinations_times_2 (build: AUD target: AUD) in 0.000000 secs failed_check [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT failed_check [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 2 invalidation(s) counted (20 failure(s) occured, too) {/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations_Times_2())//sysiiresult-DEBgTest_Run_Result [host 10/100]: trace_with_all_level_type_combinations_times_2 (build: AUD target: DEB) in 0.000000 secs FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] failed_check [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 2 invalidation(s) counted (22 failure(s) occured, too) {/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_All_Level_Type_Combinations_Times_2())//sysiiresult-PRO{Test_Run_Result [host 10/100]: trace_with_all_level_type_combinations_times_2 (build: AUD target: PRO) in 0.000000 secs FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED CHECK (FAILURE) [DEB]: failed check [base file 1] failed_check [PRO]: failed check [base file 1] FAILED_CHECK (INVALIDATION) [TES]: failed check -- INVALIDATION [base file 1] FAILED_ASSERTION [AUD]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [DEB]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [PRO]: failed assertion -- FAILURE [base file 1] FAILED_ASSERTION [TES]: failed assertion -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [AUD]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [DEB]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [PRO]: unexpected exception -- FAILURE [base file 1] UNEXPECTED_EXCEPTION [TES]: unexpected exception -- FAILURE [base file 1] wrong_exception [AUD]: wrong exception [base file 1] wrong_exception [DEB]: wrong exception [base file 1] wrong_exception [PRO]: wrong exception [base file 1] WRONG_EXCEPTION [TES]: wrong exception -- FAILURE [base file 1] missing_exception [AUD]: missing exception [base file 1] missing_exception [DEB]: missing exception [base file 1] missing_exception [PRO]: missing exception [base file 1] MISSING_EXCEPTION [TES]: missing exception -- FAILURE [base file 1] trace_binary [AUD] trace_binary [DEB] trace_binary [PRO] trace_binary [TES] trace [AUD]: TYPE_TRACE trace [DEB]: TYPE_TRACE trace [PRO]: TYPE_TRACE trace [TES]: TYPE_TRACE method_enter [AUD]: TYPE_METHOD_ENTER method_enter [DEB]: TYPE_METHOD_ENTER method_enter [PRO]: TYPE_METHOD_ENTER method_enter [TES]: TYPE_METHOD_ENTER method_exit [TES]: TYPE_METHOD_EXIT method_exit [PRO]: TYPE_METHOD_EXIT method_exit [DEB]: TYPE_METHOD_EXIT method_exit [AUD]: TYPE_METHOD_EXIT block_enter [AUD]: TYPE_BLOCK_ENTER block_enter [DEB]: TYPE_BLOCK_ENTER block_enter [PRO]: TYPE_BLOCK_ENTER block_enter [TES]: TYPE_BLOCK_ENTER block_exit [TES]: TYPE_BLOCK_EXIT block_exit [PRO]: TYPE_BLOCK_EXIT block_exit [DEB]: TYPE_BLOCK_EXIT block_exit [AUD]: TYPE_BLOCK_EXIT procedure_enter [AUD]: TYPE_PROCEDURE_ENTER procedure_enter [DEB]: TYPE_PROCEDURE_ENTER procedure_enter [PRO]: TYPE_PROCEDURE_ENTER procedure_enter [TES]: TYPE_PROCEDURE_ENTER procedure_exit [TES]: TYPE_PROCEDURE_EXIT procedure_exit [PRO]: TYPE_PROCEDURE_EXIT procedure_exit [DEB]: TYPE_PROCEDURE_EXIT procedure_exit [AUD]: TYPE_PROCEDURE_EXIT INVALID: 2 invalidation(s) counted (24 failure(s) occured, too) h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failed_Check())//nosysresult-AUD}Test_Run_Result: trace_with_one_failure (build: AUD target: AUD) failed_check [AUD]: failed check [base file 1] SUCCEEDED h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failed_Check())//nosysresult-DEBTest_Run_Result: trace_with_one_failure (build: AUD target: DEB) FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED: 1 failure(s) counted. h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failed_Check())//nosysresult-PROTest_Run_Result: trace_with_one_failure (build: AUD target: PRO) FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED: 1 failure(s) counted. h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failed_Check())//sysiiresult-AUDTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: AUD) in 0.000000 secs failed_check [AUD]: failed check [base file 1] SUCCEEDED h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failed_Check())//sysiiresult-DEBTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: DEB) in 0.000000 secs FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED: 1 failure(s) counted. h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failed_Check())//sysiiresult-PROTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: PRO) in 0.000000 secs FAILED CHECK (FAILURE) [AUD]: failed check [base file 1] FAILED: 1 failure(s) counted. c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failure())//nosysresult-AUDTest_Run_Result: trace_with_one_failure (build: AUD target: AUD) FAILED_ASSERTION [TES]: failure [base file 1] FAILED: 1 failure(s) counted. c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failure())//nosysresult-DEBTest_Run_Result: trace_with_one_failure (build: AUD target: DEB) FAILED_ASSERTION [TES]: failure [base file 1] FAILED: 1 failure(s) counted. c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failure())//nosysresult-PROTest_Run_Result: trace_with_one_failure (build: AUD target: PRO) FAILED_ASSERTION [TES]: failure [base file 1] FAILED: 1 failure(s) counted. c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failure())//sysiiresult-AUDTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: AUD) in 0.000000 secs FAILED_ASSERTION [TES]: failure [base file 1] FAILED: 1 failure(s) counted. c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failure())//sysiiresult-DEBTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: DEB) in 0.000000 secs FAILED_ASSERTION [TES]: failure [base file 1] FAILED: 1 failure(s) counted. c/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Failure())//sysiiresult-PROTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: PRO) in 0.000000 secs FAILED_ASSERTION [TES]: failure [base file 1] FAILED: 1 failure(s) counted. h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Invalidation())//nosysresult-AUDTest_Run_Result: trace_with_one_failure (build: AUD target: AUD) FAILED_CHECK (INVALIDATION) [TES]: failed check -- invalidation [base file 1] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Invalidation())//nosysresult-DEBTest_Run_Result: trace_with_one_failure (build: AUD target: DEB) FAILED_CHECK (INVALIDATION) [TES]: failed check -- invalidation [base file 1] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Invalidation())//nosysresult-PROTest_Run_Result: trace_with_one_failure (build: AUD target: PRO) FAILED_CHECK (INVALIDATION) [TES]: failed check -- invalidation [base file 1] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Invalidation())//sysiiresult-AUDTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: AUD) in 0.000000 secs FAILED_CHECK (INVALIDATION) [TES]: failed check -- invalidation [base file 1] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Invalidation())//sysiiresult-DEBTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: DEB) in 0.000000 secs FAILED_CHECK (INVALIDATION) [TES]: failed check -- invalidation [base file 1] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) h/Test_Run_Result/fct/normal/Correct_Trace_Processing(new Trace_With_One_Invalidation())//sysiiresult-PROTest_Run_Result [host 10/100]: trace_with_one_failure (build: AUD target: PRO) in 0.000000 secs FAILED_CHECK (INVALIDATION) [TES]: failed check -- invalidation [base file 1] INVALID: 1 invalidation(s) counted (0 failure(s) occured, too) H/Test_Run_Result/fct/normal/cstr_copy_assign_compare_recordless//nosysr16Test_Run_Result: STATE_EMPTY (build: PRO target: PRO) H/Test_Run_Result/fct/normal/cstr_copy_assign_compare_recordless//nosysr26Test_Run_Result: STATE_EMPTY (build: DEB target: PRO) H/Test_Run_Result/fct/normal/cstr_copy_assign_compare_recordless//nosysr36Test_Run_Result: STATE_EMPTY (build: AUD target: DEB) H/Test_Run_Result/fct/normal/cstr_copy_assign_compare_recordless//sysiir16Test_Run_Result: STATE_EMPTY (build: PRO target: PRO) H/Test_Run_Result/fct/normal/cstr_copy_assign_compare_recordless//sysiir26Test_Run_Result: STATE_EMPTY (build: DEB target: PRO) H/Test_Run_Result/fct/normal/cstr_copy_assign_compare_recordless//sysiir36Test_Run_Result: STATE_EMPTY (build: AUD target: DEB) J/Test_Run_Result/fct/normal/cstr_copy_assign_compare_with_records//nosysr0YTest_Run_Result: empty_test_case_1sec_1usec_no_carry (build: PRO target: PRO) SUCCEEDED J/Test_Run_Result/fct/normal/cstr_copy_assign_compare_with_records//nosysr1PTest_Run_Result: empty_test_case_0sec_0usec (build: AUD target: DEB) SUCCEEDED J/Test_Run_Result/fct/normal/cstr_copy_assign_compare_with_records//sysiir0xTest_Run_Result [host 10/100]: empty_test_case_1sec_1usec_no_carry (build: PRO target: PRO) in 1.000001 secs SUCCEEDED J/Test_Run_Result/fct/normal/cstr_copy_assign_compare_with_records//sysiir1oTest_Run_Result [host 10/100]: empty_test_case_0sec_0usec (build: AUD target: DEB) in 0.000000 secs SUCCEEDED @/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A`ENTER: /* TES TES VISIT_SUITE: /S1 TES VISIT_CASE: /S1/C1 TES VISIT_CASE: /S1/C2 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/C1 TES VISIT_CASE: /S1/S2/C2 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/C1 TES VISIT_CASE: /S1/S3/C2 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /* TES no EXCEP B/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-AdENTER: /*/* TES TES VISIT_SUITE: /S1 TES VISIT_CASE: /S1/C1 TES VISIT_CASE: /S1/C2 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/C1 TES VISIT_CASE: /S1/S2/C2 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/C1 TES VISIT_CASE: /S1/S3/C2 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/* TES no EXCEP D/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-A-A6ENTER: /*/*/* TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/C1 TES VISIT_CASE: /S1/S2/C2 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/C1 TES VISIT_CASE: /S1/S3/C2 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/*/* TES no EXCEP F/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-A-A-AENTER: /*/*/*/* TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/*/*/* TES no EXCEP E/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-A-C1ENTER: /*/*/C1 TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/C1 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/C1 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/*/C1 TES no EXCEP E/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-A-C2ENTER: /*/*/C2 TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/C2 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/C2 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/*/C2 TES no EXCEP C/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-C1mENTER: /*/C1 TES TES VISIT_SUITE: /S1 TES VISIT_CASE: /S1/C1 TES LEAVE_SUITE: /S1 EXIT: /*/C1 TES no EXCEP E/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-S2-AENTER: /*/S2/* TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/C1 TES VISIT_CASE: /S1/S2/C2 TES LEAVE_SUITE: /S1/S2 TES LEAVE_SUITE: /S1 EXIT: /*/S2/* TES no EXCEP E/Test_Suite_Traversal/fct/normal/dump_simple_test_suite//TES::-A-S3-AENTER: /*/S3/* TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/C1 TES VISIT_CASE: /S1/S3/C2 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/S3/* TES no EXCEP H/Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//TES::-AHENTER: /* TES TES VISIT_SUITE: / TES VISIT_CASE: //C1 TES VISIT_CASE: //C2 TES VISIT_SUITE: //S2 TES VISIT_CASE: //S2/C1 TES VISIT_CASE: //S2/C2 TES LEAVE_SUITE: //S2 TES VISIT_SUITE: //S3 TES VISIT_CASE: //S3/C1 TES VISIT_CASE: //S3/C2 TES LEAVE_SUITE: //S3 TES LEAVE_SUITE: / EXIT: /* TES no EXCEP J/Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//TES::-A-AENTER: /*/* TES TES VISIT_SUITE: / TES VISIT_SUITE: //S2 TES VISIT_CASE: //S2/C1 TES VISIT_CASE: //S2/C2 TES LEAVE_SUITE: //S2 TES VISIT_SUITE: //S3 TES VISIT_CASE: //S3/C1 TES VISIT_CASE: //S3/C2 TES LEAVE_SUITE: //S3 TES LEAVE_SUITE: / EXIT: /*/* TES no EXCEP K/Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//TES::-A-C1ENTER: /*/C1 TES TES VISIT_SUITE: / TES VISIT_SUITE: //S2 TES VISIT_CASE: //S2/C1 TES LEAVE_SUITE: //S2 TES VISIT_SUITE: //S3 TES VISIT_CASE: //S3/C1 TES LEAVE_SUITE: //S3 TES LEAVE_SUITE: / EXIT: /*/C1 TES no EXCEP K/Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//TES::-A-C2ENTER: /*/C2 TES TES VISIT_SUITE: / TES VISIT_SUITE: //S2 TES VISIT_CASE: //S2/C2 TES LEAVE_SUITE: //S2 TES VISIT_SUITE: //S3 TES VISIT_CASE: //S3/C2 TES LEAVE_SUITE: //S3 TES LEAVE_SUITE: / EXIT: /*/C2 TES no EXCEP I/Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//TES::-C1cENTER: /C1 TES TES VISIT_SUITE: / TES VISIT_CASE: //C1 TES LEAVE_SUITE: / EXIT: /C1 TES no EXCEP K/Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//TES::-S2-AENTER: /S2/* TES TES VISIT_SUITE: / TES VISIT_SUITE: //S2 TES VISIT_CASE: //S2/C1 TES VISIT_CASE: //S2/C2 TES LEAVE_SUITE: //S2 TES LEAVE_SUITE: / EXIT: /S2/* TES no EXCEP K/Test_Suite_Traversal/fct/normal/dump_simple_unnamed_test_suite//TES::-S3-AENTER: /S3/* TES TES VISIT_SUITE: / TES VISIT_SUITE: //S3 TES VISIT_CASE: //S3/C1 TES VISIT_CASE: //S3/C2 TES LEAVE_SUITE: //S3 TES LEAVE_SUITE: / EXIT: /S3/* TES no EXCEP R/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A.ENTER: /* AUD AUD VISIT_SUITE: /S1 AUD VISIT_CASE: /S1/name4 AUD VISIT_CASE: /S1/name5 AUD VISIT_CASE: /S1/name6 AUD VISIT_CASE: /S1/name7 AUD VISIT_SUITE: /S1/S2 AUD VISIT_CASE: /S1/S2/name4 AUD VISIT_CASE: /S1/S2/name5 AUD VISIT_CASE: /S1/S2/name6 AUD VISIT_CASE: /S1/S2/name7 AUD LEAVE_SUITE: /S1/S2 AUD VISIT_SUITE: /S1/S3 AUD VISIT_CASE: /S1/S3/name4 AUD VISIT_CASE: /S1/S3/name5 AUD VISIT_CASE: /S1/S3/name6 AUD VISIT_CASE: /S1/S3/name7 AUD LEAVE_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1 EXIT: /* AUD no EXCEP T/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A-A2ENTER: /*/* AUD AUD VISIT_SUITE: /S1 AUD VISIT_CASE: /S1/name4 AUD VISIT_CASE: /S1/name5 AUD VISIT_CASE: /S1/name6 AUD VISIT_CASE: /S1/name7 AUD VISIT_SUITE: /S1/S2 AUD VISIT_CASE: /S1/S2/name4 AUD VISIT_CASE: /S1/S2/name5 AUD VISIT_CASE: /S1/S2/name6 AUD VISIT_CASE: /S1/S2/name7 AUD LEAVE_SUITE: /S1/S2 AUD VISIT_SUITE: /S1/S3 AUD VISIT_CASE: /S1/S3/name4 AUD VISIT_CASE: /S1/S3/name5 AUD VISIT_CASE: /S1/S3/name6 AUD VISIT_CASE: /S1/S3/name7 AUD LEAVE_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1 EXIT: /*/* AUD no EXCEP V/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A-A-AENTER: /*/*/* AUD AUD VISIT_SUITE: /S1 AUD VISIT_SUITE: /S1/S2 AUD VISIT_CASE: /S1/S2/name4 AUD VISIT_CASE: /S1/S2/name5 AUD VISIT_CASE: /S1/S2/name6 AUD VISIT_CASE: /S1/S2/name7 AUD LEAVE_SUITE: /S1/S2 AUD VISIT_SUITE: /S1/S3 AUD VISIT_CASE: /S1/S3/name4 AUD VISIT_CASE: /S1/S3/name5 AUD VISIT_CASE: /S1/S3/name6 AUD VISIT_CASE: /S1/S3/name7 AUD LEAVE_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1 EXIT: /*/*/* AUD no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A-A-name1ENTER: /*/*/name1 AUD AUD VISIT_SUITE: /S1 AUD VISIT_SUITE: /S1/S2 AUD LEAVE_SUITE: /S1/S2 AUD VISIT_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1 EXIT: /*/*/name1 AUD no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A-A-name2ENTER: /*/*/name2 AUD AUD VISIT_SUITE: /S1 AUD VISIT_SUITE: /S1/S2 AUD LEAVE_SUITE: /S1/S2 AUD VISIT_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1 EXIT: /*/*/name2 AUD no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A-S2-AENTER: /*/S2/* AUD AUD VISIT_SUITE: /S1 AUD VISIT_SUITE: /S1/S2 AUD VISIT_CASE: /S1/S2/name4 AUD VISIT_CASE: /S1/S2/name5 AUD VISIT_CASE: /S1/S2/name6 AUD VISIT_CASE: /S1/S2/name7 AUD LEAVE_SUITE: /S1/S2 AUD LEAVE_SUITE: /S1 EXIT: /*/S2/* AUD no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A-S3-AENTER: /*/S3/* AUD AUD VISIT_SUITE: /S1 AUD VISIT_SUITE: /S1/S3 AUD VISIT_CASE: /S1/S3/name4 AUD VISIT_CASE: /S1/S3/name5 AUD VISIT_CASE: /S1/S3/name6 AUD VISIT_CASE: /S1/S3/name7 AUD LEAVE_SUITE: /S1/S3 AUD LEAVE_SUITE: /S1 EXIT: /*/S3/* AUD no EXCEP X/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//AUD::-A-name1ZENTER: /*/name1 AUD AUD VISIT_SUITE: /S1 AUD LEAVE_SUITE: /S1 EXIT: /*/name1 AUD no EXCEP R/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A.ENTER: /* DEB DEB VISIT_SUITE: /S1 DEB VISIT_CASE: /S1/name2 DEB VISIT_CASE: /S1/name3 DEB VISIT_CASE: /S1/name6 DEB VISIT_CASE: /S1/name7 DEB VISIT_SUITE: /S1/S2 DEB VISIT_CASE: /S1/S2/name2 DEB VISIT_CASE: /S1/S2/name3 DEB VISIT_CASE: /S1/S2/name6 DEB VISIT_CASE: /S1/S2/name7 DEB LEAVE_SUITE: /S1/S2 DEB VISIT_SUITE: /S1/S3 DEB VISIT_CASE: /S1/S3/name2 DEB VISIT_CASE: /S1/S3/name3 DEB VISIT_CASE: /S1/S3/name6 DEB VISIT_CASE: /S1/S3/name7 DEB LEAVE_SUITE: /S1/S3 DEB LEAVE_SUITE: /S1 EXIT: /* DEB no EXCEP T/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A-A2ENTER: /*/* DEB DEB VISIT_SUITE: /S1 DEB VISIT_CASE: /S1/name2 DEB VISIT_CASE: /S1/name3 DEB VISIT_CASE: /S1/name6 DEB VISIT_CASE: /S1/name7 DEB VISIT_SUITE: /S1/S2 DEB VISIT_CASE: /S1/S2/name2 DEB VISIT_CASE: /S1/S2/name3 DEB VISIT_CASE: /S1/S2/name6 DEB VISIT_CASE: /S1/S2/name7 DEB LEAVE_SUITE: /S1/S2 DEB VISIT_SUITE: /S1/S3 DEB VISIT_CASE: /S1/S3/name2 DEB VISIT_CASE: /S1/S3/name3 DEB VISIT_CASE: /S1/S3/name6 DEB VISIT_CASE: /S1/S3/name7 DEB LEAVE_SUITE: /S1/S3 DEB LEAVE_SUITE: /S1 EXIT: /*/* DEB no EXCEP V/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A-A-AENTER: /*/*/* DEB DEB VISIT_SUITE: /S1 DEB VISIT_SUITE: /S1/S2 DEB VISIT_CASE: /S1/S2/name2 DEB VISIT_CASE: /S1/S2/name3 DEB VISIT_CASE: /S1/S2/name6 DEB VISIT_CASE: /S1/S2/name7 DEB LEAVE_SUITE: /S1/S2 DEB VISIT_SUITE: /S1/S3 DEB VISIT_CASE: /S1/S3/name2 DEB VISIT_CASE: /S1/S3/name3 DEB VISIT_CASE: /S1/S3/name6 DEB VISIT_CASE: /S1/S3/name7 DEB LEAVE_SUITE: /S1/S3 DEB LEAVE_SUITE: /S1 EXIT: /*/*/* DEB no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A-A-name1ENTER: /*/*/name1 DEB DEB VISIT_SUITE: /S1 DEB VISIT_SUITE: /S1/S2 DEB LEAVE_SUITE: /S1/S2 DEB VISIT_SUITE: /S1/S3 DEB LEAVE_SUITE: /S1/S3 DEB LEAVE_SUITE: /S1 EXIT: /*/*/name1 DEB no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A-A-name2ENTER: /*/*/name2 DEB DEB VISIT_SUITE: /S1 DEB VISIT_SUITE: /S1/S2 DEB VISIT_CASE: /S1/S2/name2 DEB LEAVE_SUITE: /S1/S2 DEB VISIT_SUITE: /S1/S3 DEB VISIT_CASE: /S1/S3/name2 DEB LEAVE_SUITE: /S1/S3 DEB LEAVE_SUITE: /S1 EXIT: /*/*/name2 DEB no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A-S2-AENTER: /*/S2/* DEB DEB VISIT_SUITE: /S1 DEB VISIT_SUITE: /S1/S2 DEB VISIT_CASE: /S1/S2/name2 DEB VISIT_CASE: /S1/S2/name3 DEB VISIT_CASE: /S1/S2/name6 DEB VISIT_CASE: /S1/S2/name7 DEB LEAVE_SUITE: /S1/S2 DEB LEAVE_SUITE: /S1 EXIT: /*/S2/* DEB no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A-S3-AENTER: /*/S3/* DEB DEB VISIT_SUITE: /S1 DEB VISIT_SUITE: /S1/S3 DEB VISIT_CASE: /S1/S3/name2 DEB VISIT_CASE: /S1/S3/name3 DEB VISIT_CASE: /S1/S3/name6 DEB VISIT_CASE: /S1/S3/name7 DEB LEAVE_SUITE: /S1/S3 DEB LEAVE_SUITE: /S1 EXIT: /*/S3/* DEB no EXCEP X/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//DEB::-A-name1ZENTER: /*/name1 DEB DEB VISIT_SUITE: /S1 DEB LEAVE_SUITE: /S1 EXIT: /*/name1 DEB no EXCEP R/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A.ENTER: /* PRO PRO VISIT_SUITE: /S1 PRO VISIT_CASE: /S1/name1 PRO VISIT_CASE: /S1/name3 PRO VISIT_CASE: /S1/name5 PRO VISIT_CASE: /S1/name7 PRO VISIT_SUITE: /S1/S2 PRO VISIT_CASE: /S1/S2/name1 PRO VISIT_CASE: /S1/S2/name3 PRO VISIT_CASE: /S1/S2/name5 PRO VISIT_CASE: /S1/S2/name7 PRO LEAVE_SUITE: /S1/S2 PRO VISIT_SUITE: /S1/S3 PRO VISIT_CASE: /S1/S3/name1 PRO VISIT_CASE: /S1/S3/name3 PRO VISIT_CASE: /S1/S3/name5 PRO VISIT_CASE: /S1/S3/name7 PRO LEAVE_SUITE: /S1/S3 PRO LEAVE_SUITE: /S1 EXIT: /* PRO no EXCEP T/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A-A2ENTER: /*/* PRO PRO VISIT_SUITE: /S1 PRO VISIT_CASE: /S1/name1 PRO VISIT_CASE: /S1/name3 PRO VISIT_CASE: /S1/name5 PRO VISIT_CASE: /S1/name7 PRO VISIT_SUITE: /S1/S2 PRO VISIT_CASE: /S1/S2/name1 PRO VISIT_CASE: /S1/S2/name3 PRO VISIT_CASE: /S1/S2/name5 PRO VISIT_CASE: /S1/S2/name7 PRO LEAVE_SUITE: /S1/S2 PRO VISIT_SUITE: /S1/S3 PRO VISIT_CASE: /S1/S3/name1 PRO VISIT_CASE: /S1/S3/name3 PRO VISIT_CASE: /S1/S3/name5 PRO VISIT_CASE: /S1/S3/name7 PRO LEAVE_SUITE: /S1/S3 PRO LEAVE_SUITE: /S1 EXIT: /*/* PRO no EXCEP V/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A-A-AENTER: /*/*/* PRO PRO VISIT_SUITE: /S1 PRO VISIT_SUITE: /S1/S2 PRO VISIT_CASE: /S1/S2/name1 PRO VISIT_CASE: /S1/S2/name3 PRO VISIT_CASE: /S1/S2/name5 PRO VISIT_CASE: /S1/S2/name7 PRO LEAVE_SUITE: /S1/S2 PRO VISIT_SUITE: /S1/S3 PRO VISIT_CASE: /S1/S3/name1 PRO VISIT_CASE: /S1/S3/name3 PRO VISIT_CASE: /S1/S3/name5 PRO VISIT_CASE: /S1/S3/name7 PRO LEAVE_SUITE: /S1/S3 PRO LEAVE_SUITE: /S1 EXIT: /*/*/* PRO no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A-A-name1ENTER: /*/*/name1 PRO PRO VISIT_SUITE: /S1 PRO VISIT_SUITE: /S1/S2 PRO VISIT_CASE: /S1/S2/name1 PRO LEAVE_SUITE: /S1/S2 PRO VISIT_SUITE: /S1/S3 PRO VISIT_CASE: /S1/S3/name1 PRO LEAVE_SUITE: /S1/S3 PRO LEAVE_SUITE: /S1 EXIT: /*/*/name1 PRO no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A-A-name2ENTER: /*/*/name2 PRO PRO VISIT_SUITE: /S1 PRO VISIT_SUITE: /S1/S2 PRO LEAVE_SUITE: /S1/S2 PRO VISIT_SUITE: /S1/S3 PRO LEAVE_SUITE: /S1/S3 PRO LEAVE_SUITE: /S1 EXIT: /*/*/name2 PRO no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A-S2-AENTER: /*/S2/* PRO PRO VISIT_SUITE: /S1 PRO VISIT_SUITE: /S1/S2 PRO VISIT_CASE: /S1/S2/name1 PRO VISIT_CASE: /S1/S2/name3 PRO VISIT_CASE: /S1/S2/name5 PRO VISIT_CASE: /S1/S2/name7 PRO LEAVE_SUITE: /S1/S2 PRO LEAVE_SUITE: /S1 EXIT: /*/S2/* PRO no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A-S3-AENTER: /*/S3/* PRO PRO VISIT_SUITE: /S1 PRO VISIT_SUITE: /S1/S3 PRO VISIT_CASE: /S1/S3/name1 PRO VISIT_CASE: /S1/S3/name3 PRO VISIT_CASE: /S1/S3/name5 PRO VISIT_CASE: /S1/S3/name7 PRO LEAVE_SUITE: /S1/S3 PRO LEAVE_SUITE: /S1 EXIT: /*/S3/* PRO no EXCEP X/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//PRO::-A-name1vENTER: /*/name1 PRO PRO VISIT_SUITE: /S1 PRO VISIT_CASE: /S1/name1 PRO LEAVE_SUITE: /S1 EXIT: /*/name1 PRO no EXCEP R/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-AENTER: /* TES TES VISIT_SUITE: /S1 TES VISIT_CASE: /S1/name0 TES VISIT_CASE: /S1/name1 TES VISIT_CASE: /S1/name2 TES VISIT_CASE: /S1/name3 TES VISIT_CASE: /S1/name4 TES VISIT_CASE: /S1/name5 TES VISIT_CASE: /S1/name6 TES VISIT_CASE: /S1/name7 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/name0 TES VISIT_CASE: /S1/S2/name1 TES VISIT_CASE: /S1/S2/name2 TES VISIT_CASE: /S1/S2/name3 TES VISIT_CASE: /S1/S2/name4 TES VISIT_CASE: /S1/S2/name5 TES VISIT_CASE: /S1/S2/name6 TES VISIT_CASE: /S1/S2/name7 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/name0 TES VISIT_CASE: /S1/S3/name1 TES VISIT_CASE: /S1/S3/name2 TES VISIT_CASE: /S1/S3/name3 TES VISIT_CASE: /S1/S3/name4 TES VISIT_CASE: /S1/S3/name5 TES VISIT_CASE: /S1/S3/name6 TES VISIT_CASE: /S1/S3/name7 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /* TES no EXCEP T/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-A-AENTER: /*/* TES TES VISIT_SUITE: /S1 TES VISIT_CASE: /S1/name0 TES VISIT_CASE: /S1/name1 TES VISIT_CASE: /S1/name2 TES VISIT_CASE: /S1/name3 TES VISIT_CASE: /S1/name4 TES VISIT_CASE: /S1/name5 TES VISIT_CASE: /S1/name6 TES VISIT_CASE: /S1/name7 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/name0 TES VISIT_CASE: /S1/S2/name1 TES VISIT_CASE: /S1/S2/name2 TES VISIT_CASE: /S1/S2/name3 TES VISIT_CASE: /S1/S2/name4 TES VISIT_CASE: /S1/S2/name5 TES VISIT_CASE: /S1/S2/name6 TES VISIT_CASE: /S1/S2/name7 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/name0 TES VISIT_CASE: /S1/S3/name1 TES VISIT_CASE: /S1/S3/name2 TES VISIT_CASE: /S1/S3/name3 TES VISIT_CASE: /S1/S3/name4 TES VISIT_CASE: /S1/S3/name5 TES VISIT_CASE: /S1/S3/name6 TES VISIT_CASE: /S1/S3/name7 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/* TES no EXCEP V/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-A-A-AENTER: /*/*/* TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/name0 TES VISIT_CASE: /S1/S2/name1 TES VISIT_CASE: /S1/S2/name2 TES VISIT_CASE: /S1/S2/name3 TES VISIT_CASE: /S1/S2/name4 TES VISIT_CASE: /S1/S2/name5 TES VISIT_CASE: /S1/S2/name6 TES VISIT_CASE: /S1/S2/name7 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/name0 TES VISIT_CASE: /S1/S3/name1 TES VISIT_CASE: /S1/S3/name2 TES VISIT_CASE: /S1/S3/name3 TES VISIT_CASE: /S1/S3/name4 TES VISIT_CASE: /S1/S3/name5 TES VISIT_CASE: /S1/S3/name6 TES VISIT_CASE: /S1/S3/name7 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/*/* TES no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-A-A-name1ENTER: /*/*/name1 TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/name1 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/name1 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/*/name1 TES no EXCEP Z/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-A-A-name2ENTER: /*/*/name2 TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/name2 TES LEAVE_SUITE: /S1/S2 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/name2 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/*/name2 TES no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-A-S2-AENTER: /*/S2/* TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S2 TES VISIT_CASE: /S1/S2/name0 TES VISIT_CASE: /S1/S2/name1 TES VISIT_CASE: /S1/S2/name2 TES VISIT_CASE: /S1/S2/name3 TES VISIT_CASE: /S1/S2/name4 TES VISIT_CASE: /S1/S2/name5 TES VISIT_CASE: /S1/S2/name6 TES VISIT_CASE: /S1/S2/name7 TES LEAVE_SUITE: /S1/S2 TES LEAVE_SUITE: /S1 EXIT: /*/S2/* TES no EXCEP W/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-A-S3-AENTER: /*/S3/* TES TES VISIT_SUITE: /S1 TES VISIT_SUITE: /S1/S3 TES VISIT_CASE: /S1/S3/name0 TES VISIT_CASE: /S1/S3/name1 TES VISIT_CASE: /S1/S3/name2 TES VISIT_CASE: /S1/S3/name3 TES VISIT_CASE: /S1/S3/name4 TES VISIT_CASE: /S1/S3/name5 TES VISIT_CASE: /S1/S3/name6 TES VISIT_CASE: /S1/S3/name7 TES LEAVE_SUITE: /S1/S3 TES LEAVE_SUITE: /S1 EXIT: /*/S3/* TES no EXCEP X/Test_Suite_Traversal/fct/normal/dump_test_suite_all_test_case_variations//TES::-A-name1vENTER: /*/name1 TES TES VISIT_SUITE: /S1 TES VISIT_CASE: /S1/name1 TES LEAVE_SUITE: /S1 EXIT: /*/name1 TES no EXCEP 5/Test_Suite_Traversal/fct/normal/empty_suite//AUD::-ANENTER: /* AUD AUD VISIT_SUITE: /S1 AUD LEAVE_SUITE: /S1 EXIT: /* AUD no EXCEP 5/Test_Suite_Traversal/fct/normal/empty_suite//DEB::-ANENTER: /* DEB DEB VISIT_SUITE: /S1 DEB LEAVE_SUITE: /S1 EXIT: /* DEB no EXCEP 5/Test_Suite_Traversal/fct/normal/empty_suite//PRO::-ANENTER: /* PRO PRO VISIT_SUITE: /S1 PRO LEAVE_SUITE: /S1 EXIT: /* PRO no EXCEP 5/Test_Suite_Traversal/fct/normal/empty_suite//TES::-ANENTER: /* TES TES VISIT_SUITE: /S1 TES LEAVE_SUITE: /S1 EXIT: /* TES no EXCEP 9/Test_Suite_Traversal/fct/normal/empty_suite//TES::-A-A-AVENTER: /*/*/* TES TES VISIT_SUITE: /S1 TES LEAVE_SUITE: /S1 EXIT: /*/*/* TES no EXCEP 8/Test_Suite_Traversal/fct/normal/empty_suite//TES::-S1-ATENTER: /S1/* TES TES VISIT_SUITE: /S1 TES LEAVE_SUITE: /S1 EXIT: /S1/* TES no EXCEP ;/Test_Suite_Traversal/fct/normal/empty_suite//TES::-S1-S2-AZENTER: /S1/S2/* TES TES VISIT_SUITE: /S1 TES LEAVE_SUITE: /S1 EXIT: /S1/S2/* TES no EXCEP 5/Type/fct/normal/test_type_to_string//all conversionsblock_enter block_exit procedure_enter procedure_exit method_enter method_exit trace trace_binary failed_assertion failed_check unexpected_exception wrong_exception missing_exception testcase_enter testcase_exit log_open log_close UNKNOWN 3/diff/fct/normal/diff_call_by_value//one line added Blubb +balub  Blubber </diff/fct/normal/diff_functional_test//diff_test_from_fortas No source files available syntax error, unexpected $end, expecting TOK_PATH or TOK_C_IDENT; type "help" to get usage information -file line 1 column 66: failed to find symbol `c::y' -Type checking failed -Path is feasible, e.g., main::argc=2  Path is infeasible -Path is feasible, e.g., main::argc=2 +Path is infeasible +Path is infeasible +Path is infeasible  Bye. 7/diff/fct/normal/diff_functional_test//diff_test_simple-A +AA 8/diff/fct/normal/diff_functional_test//diff_test_simple26+RowX +RowX  Row1 Row2 Row3 Row4 2/diff/fct/normal/diff_return_value//one line added Blubb +balub  Blubber +/diff_generator/fct/normal/big_data//differ#q-A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line -A line +Blubbering ;)  A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line +A different line  A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line +A another different line  A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line +A single line added  A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed +another lines changed */diff_generator/fct/normal/big_data//equal@ A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line A line ,/diff_generator/fct/normal/init_empty//color//diff_generator/fct/normal/init_empty//no color4/diff_generator/fct/normal/multi_call//changed color+-This is a very intelligent text! 7/diff_generator/fct/normal/multi_call//changed no color"-This is a very intelligent text! ,/diff_generator/fct/normal/multi_call//color++This is a very intelligent text! //diff_generator/fct/normal/multi_call//no color"+This is a very intelligent text! </diff_generator/fct/normal/multi_line//block added beginning6+RowX +RowX  Row1 Row2 Row3 Row4 9/diff_generator/fct/normal/multi_line//block added center6 Row1 Row2 +RowX +RowX  Row3 Row4 6/diff_generator/fct/normal/multi_line//block added end6 Row1 Row2 Row3 Row4 +RowX +RowX >/diff_generator/fct/normal/multi_line//block changed beginningT-RowX -RowX +RowY +RowY  Row1 Row2 Row3 Row4 ;/diff_generator/fct/normal/multi_line//block changed centerT Row1 Row2 -RowX -RowX +RowY +RowY  Row3 Row4 8/diff_generator/fct/normal/multi_line//block changed endT Row1 Row2 Row3 Row4 -RowX -RowX +RowY +RowY D/diff_generator/fct/normal/multi_line//block changed+added beginningc-RowX -RowX +RowY +RowY +RowY  Row1 Row2 Row3 Row4 A/diff_generator/fct/normal/multi_line//block changed+added centerc Row1 Row2 -RowX -RowX +RowY +RowY +RowY  Row3 Row4 >/diff_generator/fct/normal/multi_line//block changed+added endc Row1 Row2 Row3 Row4 -RowX -RowX +RowY +RowY +RowY F/diff_generator/fct/normal/multi_line//block changed+deleted beginningc-RowX -RowX -RowX +RowY +RowY  Row1 Row2 Row3 Row4 C/diff_generator/fct/normal/multi_line//block changed+deleted centerc Row1 Row2 -RowX -RowX -RowX +RowY +RowY  Row3 Row4 @/diff_generator/fct/normal/multi_line//block changed+deleted endc Row1 Row2 Row3 Row4 -RowX -RowX -RowX +RowY +RowY >/diff_generator/fct/normal/multi_line//block deleted beginning6-RowX -RowX  Row1 Row2 Row3 Row4 ;/diff_generator/fct/normal/multi_line//block deleted center6 Row1 Row2 -RowX -RowX  Row3 Row4 8/diff_generator/fct/normal/multi_line//block deleted end6 Row1 Row2 Row3 Row4 -RowX -RowX ,/diff_generator/fct/normal/multi_line//match Row1 Row2 Row3 Row4 )/diff_generator/fct/normal/no_init//color,/diff_generator/fct/normal/no_init//no color./diff_generator/fct/normal/one_line//add color++This is a very intelligent text! 1/diff_generator/fct/normal/one_line//add no color"+This is a very intelligent text! 1/diff_generator/fct/normal/one_line//delete color+-This is a very intelligent text! 4/diff_generator/fct/normal/one_line//delete no color"-This is a very intelligent text! 0/diff_generator/fct/normal/one_line//match color" This is a very intelligent text! 3/diff_generator/fct/normal/one_line//match no color" This is a very intelligent text! diagnostics-0.3.3/TODO0000644000076500000240000000022311112144336011424 00000000000000 GT01 evaluate *_RELATION only once: use a template function to evaluate the arguments, and call the BASE_ASSSERT from within there