fakesleep-0.1/0000775000175000017500000000000012211374774014531 5ustar firstvmfirstvm00000000000000fakesleep-0.1/doc/0000775000175000017500000000000012211374774015276 5ustar firstvmfirstvm00000000000000fakesleep-0.1/doc/index.rst0000664000175000017500000000003312211372562017124 0ustar firstvmfirstvm00000000000000.. include:: ../README.rst fakesleep-0.1/doc/make.bat0000664000175000017500000001506312211372523016676 0ustar firstvmfirstvm00000000000000@ECHO OFF REM Command file for Sphinx documentation if "%SPHINXBUILD%" == "" ( set SPHINXBUILD=sphinx-build ) set BUILDDIR=_build set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . set I18NSPHINXOPTS=%SPHINXOPTS% . if NOT "%PAPER%" == "" ( set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% ) if "%1" == "" goto help if "%1" == "help" ( :help echo.Please use `make ^` where ^ is one of echo. html to make standalone HTML files echo. dirhtml to make HTML files named index.html in directories echo. singlehtml to make a single large HTML file echo. pickle to make pickle files echo. json to make JSON files echo. htmlhelp to make HTML files and a HTML help project echo. qthelp to make HTML files and a qthelp project echo. devhelp to make HTML files and a Devhelp project echo. epub to make an epub echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter echo. text to make text files echo. man to make manual pages echo. texinfo to make Texinfo files echo. gettext to make PO message catalogs echo. changes to make an overview over all changed/added/deprecated items echo. xml to make Docutils-native XML files echo. pseudoxml to make pseudoxml-XML files for display purposes echo. linkcheck to check all external links for integrity echo. doctest to run all doctests embedded in the documentation if enabled goto end ) if "%1" == "clean" ( for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i del /q /s %BUILDDIR%\* goto end ) %SPHINXBUILD% 2> nul if errorlevel 9009 ( echo. echo.The 'sphinx-build' command was not found. Make sure you have Sphinx echo.installed, then set the SPHINXBUILD environment variable to point echo.to the full path of the 'sphinx-build' executable. Alternatively you echo.may add the Sphinx directory to PATH. echo. echo.If you don't have Sphinx installed, grab it from echo.http://sphinx-doc.org/ exit /b 1 ) if "%1" == "html" ( %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html if errorlevel 1 exit /b 1 echo. echo.Build finished. The HTML pages are in %BUILDDIR%/html. goto end ) if "%1" == "dirhtml" ( %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml if errorlevel 1 exit /b 1 echo. echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. goto end ) if "%1" == "singlehtml" ( %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml if errorlevel 1 exit /b 1 echo. echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. goto end ) if "%1" == "pickle" ( %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle if errorlevel 1 exit /b 1 echo. echo.Build finished; now you can process the pickle files. goto end ) if "%1" == "json" ( %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json if errorlevel 1 exit /b 1 echo. echo.Build finished; now you can process the JSON files. goto end ) if "%1" == "htmlhelp" ( %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp if errorlevel 1 exit /b 1 echo. echo.Build finished; now you can run HTML Help Workshop with the ^ .hhp project file in %BUILDDIR%/htmlhelp. goto end ) if "%1" == "qthelp" ( %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp if errorlevel 1 exit /b 1 echo. echo.Build finished; now you can run "qcollectiongenerator" with the ^ .qhcp project file in %BUILDDIR%/qthelp, like this: echo.^> qcollectiongenerator %BUILDDIR%\qthelp\fakesleep.qhcp echo.To view the help file: echo.^> assistant -collectionFile %BUILDDIR%\qthelp\fakesleep.ghc goto end ) if "%1" == "devhelp" ( %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp if errorlevel 1 exit /b 1 echo. echo.Build finished. goto end ) if "%1" == "epub" ( %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub if errorlevel 1 exit /b 1 echo. echo.Build finished. The epub file is in %BUILDDIR%/epub. goto end ) if "%1" == "latex" ( %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex if errorlevel 1 exit /b 1 echo. echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. goto end ) if "%1" == "latexpdf" ( %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex cd %BUILDDIR%/latex make all-pdf cd %BUILDDIR%/.. echo. echo.Build finished; the PDF files are in %BUILDDIR%/latex. goto end ) if "%1" == "latexpdfja" ( %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex cd %BUILDDIR%/latex make all-pdf-ja cd %BUILDDIR%/.. echo. echo.Build finished; the PDF files are in %BUILDDIR%/latex. goto end ) if "%1" == "text" ( %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text if errorlevel 1 exit /b 1 echo. echo.Build finished. The text files are in %BUILDDIR%/text. goto end ) if "%1" == "man" ( %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man if errorlevel 1 exit /b 1 echo. echo.Build finished. The manual pages are in %BUILDDIR%/man. goto end ) if "%1" == "texinfo" ( %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo if errorlevel 1 exit /b 1 echo. echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. goto end ) if "%1" == "gettext" ( %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale if errorlevel 1 exit /b 1 echo. echo.Build finished. The message catalogs are in %BUILDDIR%/locale. goto end ) if "%1" == "changes" ( %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes if errorlevel 1 exit /b 1 echo. echo.The overview file is in %BUILDDIR%/changes. goto end ) if "%1" == "linkcheck" ( %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck if errorlevel 1 exit /b 1 echo. echo.Link check complete; look for any errors in the above output ^ or in %BUILDDIR%/linkcheck/output.txt. goto end ) if "%1" == "doctest" ( %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest if errorlevel 1 exit /b 1 echo. echo.Testing of doctests in the sources finished, look at the ^ results in %BUILDDIR%/doctest/output.txt. goto end ) if "%1" == "xml" ( %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml if errorlevel 1 exit /b 1 echo. echo.Build finished. The XML files are in %BUILDDIR%/xml. goto end ) if "%1" == "pseudoxml" ( %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml if errorlevel 1 exit /b 1 echo. echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml. goto end ) :end fakesleep-0.1/doc/Makefile0000664000175000017500000001516612211372523016735 0ustar firstvmfirstvm00000000000000# Makefile for Sphinx documentation # # You can set these variables from the command line. SPHINXOPTS = SPHINXBUILD = sphinx-build PAPER = BUILDDIR = _build # User-friendly check for sphinx-build ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) $(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) endif # Internal variables. PAPEROPT_a4 = -D latex_paper_size=a4 PAPEROPT_letter = -D latex_paper_size=letter ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . # the i18n builder cannot share the environment and doctrees with the others I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . .PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext help: @echo "Please use \`make ' where is one of" @echo " html to make standalone HTML files" @echo " dirhtml to make HTML files named index.html in directories" @echo " singlehtml to make a single large HTML file" @echo " pickle to make pickle files" @echo " json to make JSON files" @echo " htmlhelp to make HTML files and a HTML help project" @echo " qthelp to make HTML files and a qthelp project" @echo " devhelp to make HTML files and a Devhelp project" @echo " epub to make an epub" @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" @echo " latexpdf to make LaTeX files and run them through pdflatex" @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" @echo " text to make text files" @echo " man to make manual pages" @echo " texinfo to make Texinfo files" @echo " info to make Texinfo files and run them through makeinfo" @echo " gettext to make PO message catalogs" @echo " changes to make an overview of all changed/added/deprecated items" @echo " xml to make Docutils-native XML files" @echo " pseudoxml to make pseudoxml-XML files for display purposes" @echo " linkcheck to check all external links for integrity" @echo " doctest to run all doctests embedded in the documentation (if enabled)" clean: rm -rf $(BUILDDIR)/* html: $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html @echo @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." dirhtml: $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml @echo @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." singlehtml: $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml @echo @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." pickle: $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle @echo @echo "Build finished; now you can process the pickle files." json: $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json @echo @echo "Build finished; now you can process the JSON files." htmlhelp: $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp @echo @echo "Build finished; now you can run HTML Help Workshop with the" \ ".hhp project file in $(BUILDDIR)/htmlhelp." qthelp: $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp @echo @echo "Build finished; now you can run "qcollectiongenerator" with the" \ ".qhcp project file in $(BUILDDIR)/qthelp, like this:" @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/fakesleep.qhcp" @echo "To view the help file:" @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/fakesleep.qhc" devhelp: $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp @echo @echo "Build finished." @echo "To view the help file:" @echo "# mkdir -p $$HOME/.local/share/devhelp/fakesleep" @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/fakesleep" @echo "# devhelp" epub: $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub @echo @echo "Build finished. The epub file is in $(BUILDDIR)/epub." latex: $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex @echo @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." @echo "Run \`make' in that directory to run these through (pdf)latex" \ "(use \`make latexpdf' here to do that automatically)." latexpdf: $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex @echo "Running LaTeX files through pdflatex..." $(MAKE) -C $(BUILDDIR)/latex all-pdf @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." latexpdfja: $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex @echo "Running LaTeX files through platex and dvipdfmx..." $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." text: $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text @echo @echo "Build finished. The text files are in $(BUILDDIR)/text." man: $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man @echo @echo "Build finished. The manual pages are in $(BUILDDIR)/man." texinfo: $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo @echo @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." @echo "Run \`make' in that directory to run these through makeinfo" \ "(use \`make info' here to do that automatically)." info: $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo @echo "Running Texinfo files through makeinfo..." make -C $(BUILDDIR)/texinfo info @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." gettext: $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale @echo @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." changes: $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes @echo @echo "The overview file is in $(BUILDDIR)/changes." linkcheck: $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck @echo @echo "Link check complete; look for any errors in the above output " \ "or in $(BUILDDIR)/linkcheck/output.txt." doctest: $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest @echo "Testing of doctests in the sources finished, look at the " \ "results in $(BUILDDIR)/doctest/output.txt." xml: $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml @echo @echo "Build finished. The XML files are in $(BUILDDIR)/xml." pseudoxml: $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml @echo @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." fakesleep-0.1/doc/conf.py0000664000175000017500000001737512211372523016600 0ustar firstvmfirstvm00000000000000# -*- coding: utf-8 -*- # # fakesleep documentation build configuration file, created by # sphinx-quickstart on Tue Sep 3 09:42:27 2013. # # This file is execfile()d with the current directory set to its containing dir. # # Note that not all possible configuration values are present in this # autogenerated file. # # All configuration values have a default; values that are commented out # serve to show the default. import sys, os # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. #sys.path.insert(0, os.path.abspath('.')) # -- General configuration ----------------------------------------------------- # If your documentation needs a minimal Sphinx version, state it here. #needs_sphinx = '1.0' # Add any Sphinx extension module names here, as strings. They can be extensions # coming with Sphinx (named 'sphinx.ext.*') or your custom ones. extensions = [] # Add any paths that contain templates here, relative to this directory. templates_path = ['_templates'] # The suffix of source filenames. source_suffix = '.rst' # The encoding of source files. #source_encoding = 'utf-8-sig' # The master toctree document. master_doc = 'index' # General information about the project. project = u'fakesleep' copyright = u'2013, Pete Fein' # The version info for the project you're documenting, acts as replacement for # |version| and |release|, also used in various other places throughout the # built documents. # # The short X.Y version. version = '0.1' # The full version, including alpha/beta/rc tags. release = '0.1' # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. #language = None # There are two options for replacing |today|: either, you set today to some # non-false value, then it is used: #today = '' # Else, today_fmt is used as the format for a strftime call. #today_fmt = '%B %d, %Y' # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. exclude_patterns = ['_build'] # The reST default role (used for this markup: `text`) to use for all documents. #default_role = None # If true, '()' will be appended to :func: etc. cross-reference text. #add_function_parentheses = True # If true, the current module name will be prepended to all description # unit titles (such as .. function::). #add_module_names = True # If true, sectionauthor and moduleauthor directives will be shown in the # output. They are ignored by default. #show_authors = False # The name of the Pygments (syntax highlighting) style to use. pygments_style = 'sphinx' # A list of ignored prefixes for module index sorting. #modindex_common_prefix = [] # If true, keep warnings as "system message" paragraphs in the built documents. #keep_warnings = False # -- Options for HTML output --------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. html_theme = 'default' # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. #html_theme_options = {} # Add any paths that contain custom themes here, relative to this directory. #html_theme_path = [] # The name for this set of Sphinx documents. If None, it defaults to # " v documentation". #html_title = None # A shorter title for the navigation bar. Default is the same as html_title. #html_short_title = None # The name of an image file (relative to this directory) to place at the top # of the sidebar. #html_logo = None # The name of an image file (within the static path) to use as favicon of the # docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 # pixels large. #html_favicon = None # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ['_static'] # If not '', a 'Last updated on:' timestamp is inserted at every page bottom, # using the given strftime format. #html_last_updated_fmt = '%b %d, %Y' # If true, SmartyPants will be used to convert quotes and dashes to # typographically correct entities. #html_use_smartypants = True # Custom sidebar templates, maps document names to template names. #html_sidebars = {} # Additional templates that should be rendered to pages, maps page names to # template names. #html_additional_pages = {} # If false, no module index is generated. #html_domain_indices = True # If false, no index is generated. #html_use_index = True # If true, the index is split into individual pages for each letter. #html_split_index = False # If true, links to the reST sources are added to the pages. #html_show_sourcelink = True # If true, "Created using Sphinx" is shown in the HTML footer. Default is True. #html_show_sphinx = True # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. #html_show_copyright = True # If true, an OpenSearch description file will be output, and all pages will # contain a tag referring to it. The value of this option must be the # base URL from which the finished HTML is served. #html_use_opensearch = '' # This is the file name suffix for HTML files (e.g. ".xhtml"). #html_file_suffix = None # Output file base name for HTML help builder. htmlhelp_basename = 'fakesleepdoc' # -- Options for LaTeX output -------------------------------------------------- latex_elements = { # The paper size ('letterpaper' or 'a4paper'). #'papersize': 'letterpaper', # The font size ('10pt', '11pt' or '12pt'). #'pointsize': '10pt', # Additional stuff for the LaTeX preamble. #'preamble': '', } # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, author, documentclass [howto/manual]). latex_documents = [ ('index', 'fakesleep.tex', u'fakesleep Documentation', u'Pete Fein', 'manual'), ] # The name of an image file (relative to this directory) to place at the top of # the title page. #latex_logo = None # For "manual" documents, if this is true, then toplevel headings are parts, # not chapters. #latex_use_parts = False # If true, show page references after internal links. #latex_show_pagerefs = False # If true, show URL addresses after external links. #latex_show_urls = False # Documents to append as an appendix to all manuals. #latex_appendices = [] # If false, no module index is generated. #latex_domain_indices = True # -- Options for manual page output -------------------------------------------- # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [ ('index', 'fakesleep', u'fakesleep Documentation', [u'Pete Fein'], 1) ] # If true, show URL addresses after external links. #man_show_urls = False # -- Options for Texinfo output ------------------------------------------------ # Grouping the document tree into Texinfo files. List of tuples # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ ('index', 'fakesleep', u'fakesleep Documentation', u'Pete Fein', 'fakesleep', 'One line description of project.', 'Miscellaneous'), ] # Documents to append as an appendix to all manuals. #texinfo_appendices = [] # If false, no module index is generated. #texinfo_domain_indices = True # How to display URL addresses: 'footnote', 'no', or 'inline'. #texinfo_show_urls = 'footnote' # If true, do not generate a @detailmenu in the "Top" node's menu. #texinfo_no_detailmenu = False fakesleep-0.1/LICENSE0000664000175000017500000000272112211366612015530 0ustar firstvmfirstvm00000000000000Copyright (c) 2013, Pete Fein All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the measure_it project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. fakesleep-0.1/fakesleep.py0000664000175000017500000000314112211370160017022 0ustar firstvmfirstvm00000000000000"""provides a fake sleep() for use in tests""" import time as time_mod originals = {name: getattr(time_mod, name) for name in ['time', 'sleep', 'gmtime', 'localtime', 'ctime', 'asctime', 'strftime']} epoch = None #: the fake current time def reset(seconds=None): """reset the global fake time to the real current time :arg float seconds: fake current time, in seconds since the epoch. If None, use the real current time. """ global epoch epoch = seconds if seconds is not None else originals['time']() reset() def time(): return epoch def sleep(seconds): global epoch epoch += seconds def gmtime(seconds=None): return originals['gmtime'](seconds if seconds is not None else epoch) def localtime(seconds=None): return originals['localtime'](seconds if seconds is not None else epoch) def ctime(seconds=None): return originals['ctime'](seconds if seconds is not None else epoch) def asctime(t=None): return originals['asctime'](t if t is not None else localtime()) def strftime(format, t=None): return originals['strftime'](format, t if t is not None else localtime()) def monkey_patch(): """monkey patch `time` module to use out versions""" reset() time_mod.time = time time_mod.sleep = sleep time_mod.gmtime = gmtime time_mod.localtime = localtime time_mod.ctime = ctime time_mod.asctime = asctime time_mod.strftime = strftime def monkey_restore(): """restore real versions. Inverse of `monkey_patch`""" for k, v in originals.items(): setattr(time_mod, k, v) global epoch epoch = Nonefakesleep-0.1/PKG-INFO0000664000175000017500000000273012211374774015630 0ustar firstvmfirstvm00000000000000Metadata-Version: 1.1 Name: fakesleep Version: 0.1 Summary: fake time.sleep() for use in tests Home-page: http://github.com/wearpants/fakesleep Author: Pete Fein Author-email: pete@wearpants.org License: BSD Description: fakesleep ========= fakesleep is a simple module for tests that use `time.sleep()`. Sleeping in tests is generally considered bad (as it makes tests run slow). Using sleep with `time.time()` can lead to spurious failures, as clock precision / interpeter overhead can cause small differences in reported times. But sometimes, you need `sleep()`. fakesleep provides a fake implementation of `time.sleep()` that doesn't actually sleep. It also guarrantees "correct" results for calls to `time.time()` and other time functions. Note that `datetime` functions are **not** faked. To install, simply call `fakesleep.monkey_patch()`. To restore the real versions, call `fakesleep.monkey_restore()`. :author: Pete Fein :license: BSD :versions: Python 2.7 & 3 :source: https://github.com/wearpants/fakesleep Platform: UNKNOWN Classifier: Programming Language :: Python :: 2 Classifier: Programming Language :: Python :: 3 Classifier: Development Status :: 5 - Production/Stable Classifier: Intended Audience :: Developers Classifier: License :: OSI Approved :: BSD License fakesleep-0.1/README.rst0000664000175000017500000000147112211372727016217 0ustar firstvmfirstvm00000000000000fakesleep ========= fakesleep is a simple module for tests that use `time.sleep()`. Sleeping in tests is generally considered bad (as it makes tests run slow). Using sleep with `time.time()` can lead to spurious failures, as clock precision / interpeter overhead can cause small differences in reported times. But sometimes, you need `sleep()`. fakesleep provides a fake implementation of `time.sleep()` that doesn't actually sleep. It also guarrantees "correct" results for calls to `time.time()` and other time functions. Note that `datetime` functions are **not** faked. To install, simply call `fakesleep.monkey_patch()`. To restore the real versions, call `fakesleep.monkey_restore()`. :author: Pete Fein :license: BSD :versions: Python 2.7 & 3 :source: https://github.com/wearpants/fakesleep fakesleep-0.1/setup.py0000664000175000017500000000120412211372301016220 0ustar firstvmfirstvm00000000000000#!/usr/bin/env python from distutils.core import setup setup(name='fakesleep', version="0.1", description='fake time.sleep() for use in tests', author='Pete Fein', author_email='pete@wearpants.org', url='http://github.com/wearpants/fakesleep', py_modules=['fakesleep'], license = "BSD", classifiers = [ "Programming Language :: Python :: 2", "Programming Language :: Python :: 3", "Development Status :: 5 - Production/Stable", "Intended Audience :: Developers", "License :: OSI Approved :: BSD License",], long_description=open('README.rst').read(), )