flexloader-0.03/0000777000175000017500000000000010312355561010567 500000000000000flexloader-0.03/README0000644000175000017500000000144710312355445011372 00000000000000flexloader is a small utility to configure SRAM based ALTERA devices. It downloads a code to the device SRAM using an ALTERA ByteBlaster or a compatible JTAG programmer (see flexloader.png for a schematic). It dialogs with it through the parallel interface, using parport. Note that you should have access rights to the parallel port. It should support APEX20K, FLEX10K, FLEX6000 and ACEX1K families, though I only tested it on a FLEX10K10 device. It currently only supports files in raw binary format (.rbf), but others format such as HEX or TTF may be implemented later. It's use is very simple: flexloader /dev/parport0 code.rbf (on linux) flexloader /dev/ppi0 code.rbf (on freebsd) flexloader currently supports a few options switches, you can get them using: flexloader --help flexloader-0.03/configure.ac0000644000175000017500000000217710312354272012776 00000000000000dnl Process this file with autoconf to produce a configure script. dnl Initialization AC_INIT(Makefile.am) AM_CONFIG_HEADER(config.h) dnl Determine the host and build type. The target is always a PIC. AC_CANONICAL_HOST AM_INIT_AUTOMAKE(flexloader, 0.03) dnl Checks for programs. AC_PROG_CC AC_PROG_RANLIB AC_PROG_INSTALL dnl Checks for header files. AC_HEADER_STDC AC_CHECK_HEADERS(fcntl.h) dnl Linux kernel AC_CHECK_HEADERS(linux/ppdev.h) AC_CHECK_HEADERS(linux/parport.h) dnl FreeBSD kernel AC_CHECK_HEADERS(dev/ppbus/ppi.h) AC_CHECK_HEADERS(dev/ppbus/ppbconf.h) dnl Checks for typedefs, structures, and compiler characteristics. AC_C_CONST AC_STRUCT_TM # some extra flags CFLAGS="$CFLAGS -Wall -Werror-implicit-function-declaration " LDFLAGS="$LDFLAGS" # pass flags AC_SUBST(CFLAGS) AC_SUBST(LDFLAGS) dnl Substitute configuration variables AC_OUTPUT( Makefile \ doc/Makefile \ src/Makefile \ ) AC_MSG_RESULT([ fleur-$VERSION is now configured for $canonical_host_type Build: $build Host: $host Source directory: $srcdir Installation prefix: $prefix C compiler: $CC $CFLAGS ]) flexloader-0.03/aclocal.m40000644000175000017500000007546210312354310012350 00000000000000# generated automatically by aclocal 1.9.6 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.6])]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 7 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 3 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 12 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. # # We cannot accept any implementation of `mkdir' that recognizes `-p'. # Some implementations (such as Solaris 8's) are not thread-safe: if a # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' # concurrently, both version can detect that a/ is missing, but only # one can create it and the other will error out. Consequently we # restrict ourselves to GNU make (using the --version option ensures # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR flexloader-0.03/Makefile.am0000644000175000017500000000026710173564555012556 00000000000000SUBDIRS = doc src CLEANFILES = *~ EXTRA_DIST = autogen.sh \ debian \ AUTHORS \ COPYING \ ChangeLog \ INSTALL \ README \ TODO flexloader-0.03/Makefile.in0000644000175000017500000004420510312354312012546 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ TODO config.guess config.sub depcomp install-sh missing \ mkinstalldirs subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ SUBDIRS = doc src CLEANFILES = *~ EXTRA_DIST = autogen.sh \ debian \ AUTHORS \ COPYING \ ChangeLog \ INSTALL \ README \ TODO all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-recursive ctags \ ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \ dist-tarZ dist-zip distcheck distclean distclean-generic \ distclean-hdr distclean-recursive distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: flexloader-0.03/config.h.in0000644000175000017500000000370210312354322012522 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if you have the header file. */ #undef HAVE_DEV_PPBUS_PPBCONF_H /* Define to 1 if you have the header file. */ #undef HAVE_DEV_PPBUS_PPI_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_LINUX_PARPORT_H /* Define to 1 if you have the header file. */ #undef HAVE_LINUX_PPDEV_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME /* Version number of package */ #undef VERSION /* Define to empty if `const' does not conform to ANSI C. */ #undef const flexloader-0.03/configure0000755000175000017500000054366110312354313012423 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.59. # # Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` exec 6>&1 # # Initializations. # ac_default_prefix=/usr/local ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. # This variable seems obsolete. It should probably be removed, and # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME= PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= ac_unique_file="Makefile.am" # Factoring default headers for most tests. ac_includes_default="\ #include #if HAVE_SYS_TYPES_H # include #endif #if HAVE_SYS_STAT_H # include #endif #if STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #if HAVE_STRING_H # if !STDC_HEADERS && HAVE_MEMORY_H # include # endif # include #endif #if HAVE_STRINGS_H # include #endif #if HAVE_INTTYPES_H # include #else # if HAVE_STDINT_H # include # endif #endif #if HAVE_UNISTD_H # include #endif" ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE RANLIB ac_ct_RANLIB CPP EGREP LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/-/_/g'` eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` eval "$ac_envvar='$ac_optarg'" export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute paths. for ac_var in exec_prefix prefix do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias ac_cv_env_build_alias_set=${build_alias+set} ac_cv_env_build_alias_value=$build_alias ac_env_host_alias_set=${host_alias+set} ac_env_host_alias_value=$host_alias ac_cv_env_host_alias_set=${host_alias+set} ac_cv_env_host_alias_value=$host_alias ac_env_target_alias_set=${target_alias+set} ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias ac_env_CC_set=${CC+set} ac_env_CC_value=$CC ac_cv_env_CC_set=${CC+set} ac_cv_env_CC_value=$CC ac_env_CFLAGS_set=${CFLAGS+set} ac_env_CFLAGS_value=$CFLAGS ac_cv_env_CFLAGS_set=${CFLAGS+set} ac_cv_env_CFLAGS_value=$CFLAGS ac_env_LDFLAGS_set=${LDFLAGS+set} ac_env_LDFLAGS_value=$LDFLAGS ac_cv_env_LDFLAGS_set=${LDFLAGS+set} ac_cv_env_LDFLAGS_value=$LDFLAGS ac_env_CPPFLAGS_set=${CPPFLAGS+set} ac_env_CPPFLAGS_value=$CPPFLAGS ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} ac_cv_env_CPPFLAGS_value=$CPPFLAGS ac_env_CPP_set=${CPP+set} ac_env_CPP_value=$CPP ac_cv_env_CPP_set=${CPP+set} ac_cv_env_CPP_value=$CPP # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d $ac_dir || continue ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. if test -f $ac_srcdir/configure.gnu; then echo $SHELL $ac_srcdir/configure.gnu --help=recursive elif test -f $ac_srcdir/configure; then echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd "$ac_popdir" done fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF Copyright (C) 2003 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit 0 fi exec 5>config.log cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ _ACEOF { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` hostinfo = `(hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" # Get rid of the leading space. ac_sep=" " ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Be sure not to use single quotes in there, as some shells, # such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, { (set) 2>&1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------- ## ## Output files. ## ## ------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; *) . ./$cache_file;; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers config.h" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f $ac_dir/shtool; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} { (exit 1); exit 1; }; } fi ac_config_guess="$SHELL $ac_aux_dir/config.guess" ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # Make sure we can run config.sub. $ac_config_sub sun4 >/dev/null 2>&1 || { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 echo "$as_me: error: cannot run $ac_config_sub" >&2;} { (exit 1); exit 1; }; } echo "$as_me:$LINENO: checking build system type" >&5 echo $ECHO_N "checking build system type... $ECHO_C" >&6 if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_build_alias=$build_alias test -z "$ac_cv_build_alias" && ac_cv_build_alias=`$ac_config_guess` test -z "$ac_cv_build_alias" && { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: $ac_cv_build" >&5 echo "${ECHO_T}$ac_cv_build" >&6 build=$ac_cv_build build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$as_me:$LINENO: checking host system type" >&5 echo $ECHO_N "checking host system type... $ECHO_C" >&6 if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_host_alias=$host_alias test -z "$ac_cv_host_alias" && ac_cv_host_alias=$ac_cv_build_alias ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: $ac_cv_host" >&5 echo "${ECHO_T}$ac_cv_host" >&6 host=$ac_cv_host host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` am__api_version="1.9" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && program_transform_name="s,^,$program_prefix,;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$,$program_suffix,;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$AWK" && break done echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 SET_MAKE= else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=flexloader VERSION=0.03 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi STRIP=$ac_ct_STRIP else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$ac_ct_CC" && break done CC=$ac_ct_CC fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO:" \ "checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 (eval $ac_compiler -V &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Find the output, starting from the most likely. This scheme is # not robust to junk in `.', hence go to wildcards (a.*) only as a last # resort. # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= # b.out is created by i960 compilers. for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; conftest.$ac_ext ) # This is the source file. ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` # FIXME: I believe we export ac_cv_exeext for Libtool, # but it would be cool to find out if it's true. Does anybody # maintain Libtool? --akim. export ac_cv_exeext break;; * ) break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6 # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6 echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6 rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6 OBJEXT=$ac_cv_objext ac_objext=$OBJEXT echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS CFLAGS="-g" echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 if test "${ac_cv_prog_cc_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_stdc=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std1 is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std1. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF # Don't try gcc -ansi; that turns off useful extensions and # breaks some systems' header files. # AIX -qlanglvl=ansi # Ultrix and OSF/1 -std1 # HP-UX 10.20 and later -Ae # HP-UX older versions -Aa -D_HPUX_SOURCE # SVR4 -Xc -D__EXTENSIONS__ for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_stdc=$ac_arg break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext done rm -f conftest.$ac_ext conftest.$ac_objext CC=$ac_save_CC fi case "x$ac_cv_prog_cc_stdc" in x|xno) echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6 ;; *) echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 CC="$CC $ac_cv_prog_cc_stdc" ;; esac # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide # the declaration of exit, since it's the most demanding environment. cat >conftest.$ac_ext <<_ACEOF #ifndef __cplusplus choke me #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ 'extern "C" void exit (int);' \ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration #include int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 continue fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then echo '#ifdef __cplusplus' >>confdefs.h echo $ac_declaration >>confdefs.h echo '#endif' >>confdefs.h fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi echo "$as_me:$LINENO: result: $_am_result" >&5 echo "${ECHO_T}$_am_result" >&6 rm -f confinc confmf # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval="$enable_dependency_tracking" fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then echo "$as_me:$LINENO: result: $RANLIB" >&5 echo "${ECHO_T}$RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 echo "${ECHO_T}$ac_ct_RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi RANLIB=$ac_ct_RANLIB else RANLIB="$ac_cv_prog_RANLIB" fi # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi echo "$as_me:$LINENO: result: $CPP" >&5 echo "${ECHO_T}$CPP" >&6 ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking for egrep" >&5 echo $ECHO_N "checking for egrep... $ECHO_C" >&6 if test "${ac_cv_prog_egrep+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if echo a | (grep -E '(a|b)') >/dev/null 2>&1 then ac_cv_prog_egrep='grep -E' else ac_cv_prog_egrep='egrep' fi fi echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 echo "${ECHO_T}$ac_cv_prog_egrep" >&6 EGREP=$ac_cv_prog_egrep echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in fcntl.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in linux/ppdev.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in linux/parport.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dev/ppbus/ppi.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dev/ppbus/ppbconf.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 if test "${ac_cv_c_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset x; /* SunOS 4.1.1 cc rejects this. */ char const *const *ccp; char **p; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; ccp = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++ccp; p = (char**) ccp; ccp = (char const *const *) p; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; } #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_const=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_c_const=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 echo "${ECHO_T}$ac_cv_c_const" >&6 if test $ac_cv_c_const = no; then cat >>confdefs.h <<\_ACEOF #define const _ACEOF fi echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6 if test "${ac_cv_struct_tm+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { struct tm *tp; tp->tm_sec; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_struct_tm=time.h else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_struct_tm=sys/time.h fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 echo "${ECHO_T}$ac_cv_struct_tm" >&6 if test $ac_cv_struct_tm = sys/time.h; then cat >>confdefs.h <<\_ACEOF #define TM_IN_SYS_TIME 1 _ACEOF fi # some extra flags CFLAGS="$CFLAGS -Wall -Werror-implicit-function-declaration " LDFLAGS="$LDFLAGS" # pass flags ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. { (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | sed ' t clear : clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; }' fi DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_i=`echo "$ac_i" | sed 's/\$U\././;s/\.o$//;s/\.obj$//'` # 2. Add them. ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by $as_me, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 _ACEOF # Files that config.status was made for. if test -n "$ac_config_files"; then echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS fi if test -n "$ac_config_headers"; then echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS fi if test -n "$ac_config_links"; then echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS fi if test -n "$ac_config_commands"; then echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS fi cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir INSTALL="$INSTALL" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ac_shift=: ;; -*) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. ac_option=$1 ac_need_defaults=false;; esac case $ac_option in # Handling of the options. _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # INIT-COMMANDS section. # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason to put it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "\$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF s,@SHELL@,$SHELL,;t t s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@exec_prefix@,$exec_prefix,;t t s,@prefix@,$prefix,;t t s,@program_transform_name@,$program_transform_name,;t t s,@bindir@,$bindir,;t t s,@sbindir@,$sbindir,;t t s,@libexecdir@,$libexecdir,;t t s,@datadir@,$datadir,;t t s,@sysconfdir@,$sysconfdir,;t t s,@sharedstatedir@,$sharedstatedir,;t t s,@localstatedir@,$localstatedir,;t t s,@libdir@,$libdir,;t t s,@includedir@,$includedir,;t t s,@oldincludedir@,$oldincludedir,;t t s,@infodir@,$infodir,;t t s,@mandir@,$mandir,;t t s,@build_alias@,$build_alias,;t t s,@host_alias@,$host_alias,;t t s,@target_alias@,$target_alias,;t t s,@DEFS@,$DEFS,;t t s,@ECHO_C@,$ECHO_C,;t t s,@ECHO_N@,$ECHO_N,;t t s,@ECHO_T@,$ECHO_T,;t t s,@LIBS@,$LIBS,;t t s,@build@,$build,;t t s,@build_cpu@,$build_cpu,;t t s,@build_vendor@,$build_vendor,;t t s,@build_os@,$build_os,;t t s,@host@,$host,;t t s,@host_cpu@,$host_cpu,;t t s,@host_vendor@,$host_vendor,;t t s,@host_os@,$host_os,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@CYGPATH_W@,$CYGPATH_W,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t s,@ACLOCAL@,$ACLOCAL,;t t s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t s,@install_sh@,$install_sh,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t s,@mkdir_p@,$mkdir_p,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@am__leading_dot@,$am__leading_dot,;t t s,@AMTAR@,$AMTAR,;t t s,@am__tar@,$am__tar,;t t s,@am__untar@,$am__untar,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t s,@DEPDIR@,$DEPDIR,;t t s,@am__include@,$am__include,;t t s,@am__quote@,$am__quote,;t t s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t s,@CCDEPMODE@,$CCDEPMODE,;t t s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t s,@CPP@,$CPP,;t t s,@EGREP@,$EGREP,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_HEADER section. # # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } # Do quote $f, to prevent DOS paths from being IFS'd. echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. sed 's/[ ]*$//' $ac_file_inputs >$tmp/in _ACEOF # Transform confdefs.h into two sed scripts, `conftest.defines' and # `conftest.undefs', that substitutes the proper values into # config.h.in to produce config.h. The first handles `#define' # templates, and the second `#undef' templates. # And first: Protect against being on the right side of a sed subst in # config.status. Protect against being in an unquoted here document # in config.status. rm -f conftest.defines conftest.undefs # Using a here document instead of a string reduces the quoting nightmare. # Putting comments in sed scripts is not portable. # # `end' is used to avoid that the second main sed command (meant for # 0-ary CPP macros) applies to n-ary macro definitions. # See the Autoconf documentation for `clear'. cat >confdef2sed.sed <<\_ACEOF s/[\\&,]/\\&/g s,[\\$`],\\&,g t clear : clear s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp t end s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp : end _ACEOF # If some macros were called several times there might be several times # the same #defines, which is useless. Nevertheless, we may not want to # sort them, since we want the *last* AC-DEFINE to be honored. uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs rm -f confdef2sed.sed # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >>conftest.undefs <<\_ACEOF s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, _ACEOF # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.defines >/dev/null do # Write a limited-size here document to $tmp/defines.sed. echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#define' lines. echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/defines.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail rm -f conftest.defines mv conftest.tail conftest.defines done rm -f conftest.defines echo ' fi # grep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #undef templates' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.undefs >/dev/null do # Write a limited-size here document to $tmp/undefs.sed. echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#undef' echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/undefs.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail rm -f conftest.undefs mv conftest.tail conftest.undefs done rm -f conftest.undefs cat >>$CONFIG_STATUS <<\_ACEOF # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then echo "/* Generated by configure. */" >$tmp/config.h else echo "/* $ac_file. Generated by configure. */" >$tmp/config.h fi cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then if diff $ac_file $tmp/config.h >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file fi else cat $tmp/config.h rm -f $tmp/config.h fi # Compute $ac_file's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $ac_file | $ac_file:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X$ac_file : 'X\(//\)[^/]' \| \ X$ac_file : 'X\(//\)$' \| \ X$ac_file : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X$ac_file | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'`/stamp-h$_am_stamp_count done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`(dirname "$mf") 2>/dev/null || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`(dirname "$file") 2>/dev/null || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p $dirpart/$fdir else as_dir=$dirpart/$fdir as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi echo "$as_me:$LINENO: result: fleur-$VERSION is now configured for $canonical_host_type Build: $build Host: $host Source directory: $srcdir Installation prefix: $prefix C compiler: $CC $CFLAGS " >&5 echo "${ECHO_T} fleur-$VERSION is now configured for $canonical_host_type Build: $build Host: $host Source directory: $srcdir Installation prefix: $prefix C compiler: $CC $CFLAGS " >&6 flexloader-0.03/AUTHORS0000644000175000017500000000004610170324503011545 00000000000000Aurelien Jarno flexloader-0.03/COPYING0000644000175000017500000003543310170324475011550 00000000000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 675 Mass Ave, Cambridge, MA 02139, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS flexloader-0.03/ChangeLog0000644000175000017500000000052710312354220012250 0000000000000015/09/2005 - Version 0.03 * Added support for GNU/kFreeBSD and probably for FreeBSD. -- Aurelien Jarno 20/01/2005 - Version 0.02 * Minor fixes, mainly in documentation. -- Aurelien Jarno 09/01/2005 - Version 0.01 * Initial release. -- Aurelien Jarno flexloader-0.03/INSTALL0000644000175000017500000001547207757706270011565 00000000000000Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.in' is used to create `configure' by a program called `autoconf'. You only need `configure.in' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Type `make install' to install the programs and any data files and documentation. 4. You can remove the program binaries and object files from the source code directory by typing `make clean'. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are building compiler tools for cross-compiling, you can also use the `--target=TYPE' option to select the type of system they will produce code for and the `--build=TYPE' option to select the type of system on which you are compiling the package. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. flexloader-0.03/NEWS0000644000175000017500000000000010170230765011170 00000000000000flexloader-0.03/TODO0000644000175000017500000000011410170345542011167 00000000000000Support for input file in HEX format. Support for input file in TTF format. flexloader-0.03/config.guess0000755000175000017500000012247107757706270013052 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003 Free Software Foundation, Inc. timestamp='2003-10-07' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit 0 ;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; arc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; macppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme88k:OpenBSD:*:*) echo m88k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvmeppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; pmax:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sgi:OpenBSD:*:*) echo mipseb-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sun3:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit 0 ;; Alpha*:OpenVMS:*:*) echo alpha-hp-vms exit 0 ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit 0;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit 0 ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit 0 ;; DRS?6000:UNIX_SV:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7 && exit 0 ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit 0 ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit 0 ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit 0 ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c \ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ && exit 0 echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit 0 ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit 0 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit 0 ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit 0 ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then # avoid double evaluation of $set_cc_for_build test -n "$CC_FOR_BUILD" || eval $set_cc_for_build if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; *:UNICOS/mp:*:*) echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) # Determine whether the default compiler uses glibc. eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #if __GLIBC__ >= 2 LIBC=gnu #else LIBC= #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` # GNU/KFreeBSD systems have a "k" prefix to indicate we are using # FreeBSD's kernel, but not the complete OS. case ${LIBC} in gnu) kernel_only='k' ;; esac echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; x86:Interix*:[34]*) echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' exit 0 ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit 0 ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit 0 ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit 0 ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips64 #undef mips64el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mips64el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips64 #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit 0 ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit 0 ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit 0 ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit 0 ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit 0 ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit 0 ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit 0 ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit 0 ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit 0 ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #ifdef __INTEL_COMPILER LIBC=gnu #else LIBC=gnuaout #endif #endif #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit 0 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit 0 ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit 0 ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit 0 ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; i*86:*:5:[78]*) case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit 0 ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit 0 ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit 0 ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit 0 ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4.3${OS_REL} && exit 0 /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit 0 ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit 0 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit 0 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit 0 ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit 0 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit 0 ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit 0 ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit 0 ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit 0 ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) case `uname -p` in *86) UNAME_PROCESSOR=i686 ;; powerpc) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; NSR-[DGKLNPTVWY]:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit 0 ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit 0 ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit 0 ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit 0 ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit 0 ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit 0 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit 0 ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit 0 ;; *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; c34*) echo c34-convex-bsd exit 0 ;; c38*) echo c38-convex-bsd exit 0 ;; c4*) echo c4-convex-bsd exit 0 ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: flexloader-0.03/config.sub0000755000175000017500000007344207757706270012520 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003 Free Software Foundation, Inc. timestamp='2003-10-07' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit 0;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32r | m68000 | m68k | m88k | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64vr | mips64vrel \ | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | msp430 \ | ns16k | ns32k \ | openrisc | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xscale | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | m32r-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64vr-* | mips64vrel-* \ | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | msp430-* \ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ | xtensa-* \ | ymp-* \ | z8k-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; c90) basic_machine=c90-cray os=-unicos ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; mmix*) basic_machine=mmix-knuth os=-mmixware ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nv1) basic_machine=nv1-cray os=-unicosmp ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; or32 | or32-*) basic_machine=or32-unknown os=-coff ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sh64) basic_machine=sh64-unknown ;; sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -ptx*) vendor=sequent ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: flexloader-0.03/depcomp0000755000175000017500000003305207757706270012103 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects # Copyright 1999, 2000, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # `libtool' can also be set to `yes' or `no'. if test -z "$depfile"; then base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` dir=`echo "$object" | sed 's,/.*$,/,'` if test "$dir" = "$object"; then dir= fi # FIXME: should be _deps on DOS. depfile="$dir.deps/$base" fi tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test -f "$tmpdepfile"; then : else stripped=`echo "$stripped" | sed 's,^.*/,,'` tmpdepfile="$stripped.u" fi if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1="$dir.libs/$base.lo.d" tmpdepfile2="$dir.libs/$base.d" "$@" -Wc,-MD else tmpdepfile1="$dir$base.o.d" tmpdepfile2="$dir$base.d" "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi if test -f "$tmpdepfile1"; then tmpdepfile="$tmpdepfile1" else tmpdepfile="$tmpdepfile2" fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 flexloader-0.03/install-sh0000755000175000017500000001572207757706270012536 00000000000000#!/bin/sh # # install - install a program, script, or datafile # # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd=$cpprog shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd=$stripprog shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "$0: no input file specified" >&2 exit 1 else : fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d "$dst" ]; then instcmd=: chmodcmd="" else instcmd=$mkdirprog fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f "$src" ] || [ -d "$src" ] then : else echo "$0: $src does not exist" >&2 exit 1 fi if [ x"$dst" = x ] then echo "$0: no destination specified" >&2 exit 1 else : fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d "$dst" ] then dst=$dst/`basename "$src"` else : fi fi ## this sed command emulates the dirname command dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-$defaultIFS}" oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` IFS=$oIFS pathcomp='' while [ $# -ne 0 ] ; do pathcomp=$pathcomp$1 shift if [ ! -d "$pathcomp" ] ; then $mkdirprog "$pathcomp" else : fi pathcomp=$pathcomp/ done fi if [ x"$dir_arg" != x ] then $doit $instcmd "$dst" && if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename "$dst"` else dstfile=`basename "$dst" $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename "$dst"` else : fi # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up temp files at exit. trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 trap '(exit $?); exit' 1 2 13 15 # Move or copy the file name to the temp name $doit $instcmd "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && # Now remove or move aside any old file at destination location. We try this # two ways since rm can't unlink itself on some systems and the destination # file might be busy for other reasons. In this case, the final cleanup # might fail but the new file should still install successfully. { if [ -f "$dstdir/$dstfile" ] then $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || { echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 (exit 1); exit } else : fi } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" fi && # The final little trick to "correctly" pass the exit status to the exit trap. { (exit 0); exit } flexloader-0.03/missing0000755000175000017500000002403207757706270012123 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing 0.4 - GNU automake" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 flexloader-0.03/mkinstalldirs0000755000175000017500000000370407757706270013335 00000000000000#! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain errstatus=0 dirmode="" usage="\ Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." # process command line arguments while test $# -gt 0 ; do case $1 in -h | --help | --h*) # -h for help echo "$usage" 1>&2 exit 0 ;; -m) # -m PERM arg shift test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } dirmode=$1 shift ;; --) # stop option processing shift break ;; -*) # unknown option echo "$usage" 1>&2 exit 1 ;; *) # first non-opt arg break ;; esac done for file do if test -d "$file"; then shift else break fi done case $# in 0) exit 0 ;; esac case $dirmode in '') if mkdir -p -- . 2>/dev/null; then echo "mkdir -p -- $*" exec mkdir -p -- "$@" fi ;; *) if mkdir -m "$dirmode" -p -- . 2>/dev/null; then echo "mkdir -m $dirmode -p -- $*" exec mkdir -m "$dirmode" -p -- "$@" fi ;; esac for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case $pathcomp in -*) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr else if test ! -z "$dirmode"; then echo "chmod $dirmode $pathcomp" lasterr="" chmod "$dirmode" "$pathcomp" || lasterr=$? if test ! -z "$lasterr"; then errstatus=$lasterr fi fi fi fi pathcomp="$pathcomp/" done done exit $errstatus # Local Variables: # mode: shell-script # sh-indentation: 2 # End: # mkinstalldirs ends here flexloader-0.03/autogen.sh0000755000175000017500000000017510170325252012503 00000000000000#!/bin/sh aclocal \ && autoheader \ && autoconf \ && automake --add-missing --foreign --copy \ && ./configure $@ flexloader-0.03/debian/0000777000175000017500000000000010312355542012010 500000000000000flexloader-0.03/debian/changelog0000644000175000017500000000047010312355542013577 00000000000000flexloader (0.03-1) unstable; urgency=low * New upstream version. -- Aurelien Jarno Thu, 15 Sep 2005 22:36:40 +0200 flexloader (0.02-1) unstable; urgency=low * Initial Debian upload (closes: bug#291308). -- Aurelien Jarno Thu, 20 Jan 2004 00:16:08 +0100 flexloader-0.03/debian/compat0000644000175000017500000000000210074556510013125 000000000000004 flexloader-0.03/debian/control0000644000175000017500000000132410173564375013342 00000000000000Source: flexloader Section: electronics Priority: extra Maintainer: Aurelien Jarno Build-Depends: debhelper (>> 4.0.0), autotools-dev Standards-Version: 3.6.1 Package: flexloader Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: utility to configure SRAM based ALTERA devices flexloader is a small utility to configure SRAM based ALTERA devices. It downloads a code to the device SRAM using an ALTERA ByteBlaster or a compatible JTAG programmer. It dialogs with it through the parallel interface, using parport. . It supports APEX20K, FLEX10K, FLEX6000 and ACEX1K families. . Author: Aurelien Jarno Homepage: http://flexloader.aurel32.net flexloader-0.03/debian/copyright0000644000175000017500000000105110173570274013662 00000000000000This package was debianized by Aurelien Jarno on Thu, 20 Jan 2004 00:02:08 +0100. It was downloaded from http://flexloader.aurel32.net Upstream Author: Aurelien Jarno Copyright: Copyright (C) 2005 Aurelien Jarno License: "The code, documentation and schematics are copyright (C) 2005 Aurelien Jarno, and are distributed under the terms of the GNU General Public License version 2." On Debian systems, the complete text of the GNU General Public License can be found at /usr/share/common-licenses/GPL flexloader-0.03/debian/docs0000644000175000017500000000001410173565456012606 00000000000000README TODO flexloader-0.03/debian/rules0000755000175000017500000000401410173565564013017 00000000000000#!/usr/bin/make -f # Sample debian/rules that uses debhelper. # GNU copyright 1997 to 1999 by Joey Hess. # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 # These are used for cross-compiling and for saving the configure script # from having to guess our platform (since we know it already) DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS))) CFLAGS += -g endif ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) INSTALL_PROGRAM += -s endif build: build-stamp build-stamp: dh_testdir -test -r /usr/share/misc/config.sub && \ cp -f /usr/share/misc/config.sub admin/config.sub -test -r /usr/share/misc/config.guess && \ cp -f /usr/share/misc/config.guess admin/config.guess -chmod 755 configure ./configure \ --prefix=/usr \ --host=$(DEB_HOST_GNU_TYPE) \ --build=$(DEB_BUILD_GNU_TYPE) \ --mandir=\$${prefix}/share/man \ --infodir=\$${prefix}/share/info $(MAKE) touch build-stamp clean: debian-clean dh_clean debian-clean: dh_testdir -$(MAKE) distclean -rm -f *-stamp -rm -f admin/config.sub admin/config.guess install: build dh_testdir dh_testroot dh_clean -k dh_installdirs # Main install. $(MAKE) install DESTDIR=$(CURDIR)/debian/flexloader # Build architecture-independent files here. binary-indep: build install # We have nothing to do by default. # Build architecture-dependent files here. binary-arch: build install dh_testdir dh_testroot # dh_installdebconf dh_installdocs # dh_installexamples dh_installmenu # dh_installlogrotate # dh_installemacsen # dh_installpam # dh_installmime # dh_installinit # dh_installcron dh_installman # dh_installinfo dh_installchangelogs ChangeLog dh_link dh_strip dh_compress --exclude=.docbook dh_fixperms # dh_makeshlibs dh_installdeb # dh_perl dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb binary: binary-indep binary-arch .PHONY: build clean binary-indep binary-arch binary install configure flexloader-0.03/doc/0000777000175000017500000000000010312355561011334 500000000000000flexloader-0.03/doc/Makefile.am0000644000175000017500000000165210173563641013315 00000000000000# Makefile.am # Copyright (C) 2005 Aurelien Jarno # # This file is part of flexloader. # # flexloader is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # gputils is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with gputils; see the file COPYING. If not, write to # the Free Software Foundation, 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. CLEANFILES = *~ man_MANS = flexloader.1 doc_DATA = flexloader.png protocol.txt docdir = $(datadir)/doc/flexloader EXTRA_DIST = $(man_MANS) $(doc_DATA) flexloader-0.03/doc/Makefile.in0000644000175000017500000002647410312354311013322 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Makefile.am # Copyright (C) 2005 Aurelien Jarno # # This file is part of flexloader. # # flexloader is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # gputils is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with gputils; see the file COPYING. If not, write to # the Free Software Foundation, 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" NROFF = nroff MANS = $(man_MANS) am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; docDATA_INSTALL = $(INSTALL_DATA) DATA = $(doc_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ CLEANFILES = *~ man_MANS = flexloader.1 doc_DATA = flexloader.png protocol.txt docdir = $(datadir)/doc/flexloader EXTRA_DIST = $(man_MANS) $(doc_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh uninstall-info-am: install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done install-docDATA: $(doc_DATA) @$(NORMAL_INSTALL) test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)" @list='$(doc_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ done uninstall-docDATA: @$(NORMAL_UNINSTALL) @list='$(doc_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ rm -f "$(DESTDIR)$(docdir)/$$f"; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) $(DATA) installdirs: for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-docDATA install-man install-exec-am: install-info: install-info-am install-man: install-man1 installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-docDATA uninstall-info-am uninstall-man uninstall-man: uninstall-man1 .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-docDATA install-exec install-exec-am install-info \ install-info-am install-man install-man1 install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am uninstall uninstall-am uninstall-docDATA \ uninstall-info-am uninstall-man uninstall-man1 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: flexloader-0.03/doc/flexloader.10000644000175000017500000000456710173564451013500 00000000000000.\" Hey, EMACS: -*- nroff -*- .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .TH FLEXLOADER "1" "January 09, 2005" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME flexloader \- GPL utility to configure SRAM based ALTERA devices via the ALTERA ByteBlaster .SH SYNOPSIS .B flexloader .I [options] [parport_dev] [rbf_filename] .SH DESCRIPTION .B flexloader is a small utility to configure SRAM based ALTERA devices. It downloads a code to the device SRAM using the ALTERA ByteBlaster or compatible JTAG programmer. It dialogs with it through the parallel interface, using parport. Note that you should have access rights to the parallel port. It should support APEX20K, FLEX10K, FLEX6000 and ACEX1K families, though I only tested it on a FLEX10K10 device. It currently only support files in raw binary format (.rbf), but others format such as HEX or TTF may be implemented later. .SH OPTIONS .TP .B "\-d, \-\-debug" Print debug messages. .TP .B "\-q, \-\-quiet" Quiet mode, don't print any message, useful when called from scripts. .TP .B "\-v" Returns the program version. .TP .B "\-h, \-\-help" Print help screen .SH AUTHOR Aurelien Jarno . .SH COPYRIGHT Copyright (C) 2005 Aurelien Jarno This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. flexloader-0.03/doc/flexloader.png0000644000175000017500000001022510170347344014105 00000000000000PNG  IHDRh"PLTEٟbKGDH pHYs.$.$* tIME (ʄ[IDATxopiPa]61Ŋ/X]$V[,z!a>C[4Hk:(z؊% 7&9!xG=oD5O#/ULϑhU*8+3qq2"EQgVgZbXc&'VȰDHu H'j7g[lAGժ6rD$G*>;`Vh̙gc -sfܕ.6ż*﷈cXc&)V*ĶJPAڪXEW=jEE1G~mU~~wڪ`QBm'Zȯ@E*\luyb+G=E)ʑ4XQ: ٪ G6L,HKgSܡIZEThϪIo>F |VWlaWH;0W4/Sz_rcy;s7zWCQc{aDVEYHrb8[DRTl?^$޷-{uXOH_%֯OJ+(wEQyBtqq~:UWڹ~^cܼkwsnῊVy|i[ZZ#6M(m#n[y=!=8d'Xfd/ )%8`XTG~/ Z%hJ+Gѵ]9 q e.s~=3*[zYpg-9KѪcN"wډG"<!A D/:)tj'f,̪?՛UJJ$Dqb;&^ӉN/RMu^2\q:zw5G9J4N*%I9W/-WXcfh1ʓSxdMdHw";kk_ŧ +,9b/ G#R%~_tW¸%eG%ŷ1w#y#~ea%֑V“+d_>8wҢvea'vG*ih[O$D}T/ RTڪxtV(\" QuP,ϰRc^ 1#~w0"V(+[YuOể}QCVnrHr>"BJSʐ-wxU r މ@a2н-1ژy_N\d71fq\EE%ErĝY%k-7Q9~[pVfff\uAedRtŗ8A9Ѭ*)ANQ튯qNUzHT/ Ss1z?ԗ(QRLʜB-QY E-ּ'`UX!YMTuD\JL|6"/[',Vt/ Z[ѽ,rSVt/1E#ZW[eg+RdNszK#!9ڊr̍9󪼡D\ bNr#D1en\tOGΪ;w\GMwͷdA*WTϏ]D nj1lEnyW>9b7L𹕛EUY)),ylre]6C<#j@$zYP٪턕;N+[CWԈ {YĢMҧ~T2U ^V9sG^1"fpa;Xg,'*ֱEoђխj,A$T⊛Vd LgiVsĝtC\|DޗĜيU^"g5oDsǕ=ED=ED?ͮ7#[!qďE{XODo;37WEgyѢ}Bﲠć=h G2W/ zwPEn1O"6-H~9+Xst&F:cV'8('qOZel<,SDms`ƢGU8Y_ST\効zYqS<+d8YP>SH:jOE#BlN!ێʏb*XJZUŢ7^9f+KT*Z|u'2s#"[/,? W*}(2lUhVYb 1ǘ8tK9zYsۣ,Yua/e1h,M _b+;Z"wqk*b(GeEHNݗ㋣zY+We"-[@boCa2D-:bTwѝ@0Q[N 1_*4={bpB Q\4f6[cD?B# dyb+f^٣V%r0zvJeYE%dDn*S4~:skquUvl{4u 1 1GVMG"{wK9nw }q^ s6DhV- VM /r7ƨ(Hc$[WkedĻE2[C s1 @UGtqzj`U@$Wd8"X؛Fl& #Ehj@N5%Zj:U`>Rܯ׫JgJkOADHavm57#m'y kg5Rnvm5(jRvm5h$m ٵ1XbRkIE<}F5TW 6xc9l,1X("X(">fL\m8'IENDB`flexloader-0.03/doc/protocol.txt0000644000175000017500000000355610170350557013665 00000000000000PASSIVE SERIAL configuration mode --------------------------------- In PASSIVE SERIAL configuration mode, an external controller passes configuration data to one or more devices via a serial data stream. The hardware resources required by the controller to configure such devices are very reduced, involving ony five lines: two bi-directional lines (CONF_DONE and nSTATUS), and three device input lines (DATA, nCONFIG and DCLK). PS configureation mode can be used to configure merely one device or a chain of devices; int he last case, the nCEO output pin from the first device is cascaded into the nCE pin of the second device and so on. It is a three steps process: 1 - Start: the controller check that nSTATUS is high, put a zero on nCONFIG, waits until CONF_DONE and nSTATUS to go zero, then writes a one on nCONFIG and waits until the target device releases nSTATUS. 2 - Data transfer: after the configuration process has started, the controller places the configuration data one bit a time, generation DCLK positive edges to input this data in the target devices, with a clock frequency up to 16MHz. Following the falling edge of DCLK after all it configuration bits are received, the device just configured release CONF_DONE and pulls down it nCEO output. While loading data, the controller must check the nSTATUS line, which is pulled down by the device under configuration if it detects some error. This error detection capability is obtained through checksum information embedded with the configuration data. 3 - Initialization: after CONF_DONE goes high, DCLK must be clocked 40 additionnal times for APEX devices, and 10 times for FLEX devices to initialize the device, going into user mode. When multiple devices are configured, the wired-AND CONF_DONE line remains low until the last device is configured, therefore all devices go to initialization mode at the same time. flexloader-0.03/src/0000777000175000017500000000000010312355561011356 500000000000000flexloader-0.03/src/Makefile.am0000644000175000017500000000040310170352246013322 00000000000000CLEANFILES = *~ *.bb *.bbg bin_PROGRAMS = flexloader flexloader_SOURCES = byteblaster.h \ byteblaster.c \ flexloader.h \ flexloader.c \ main.h \ main.c flexloader-0.03/src/Makefile.in0000644000175000017500000003124310312354312013333 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = flexloader$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(bindir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_flexloader_OBJECTS = byteblaster.$(OBJEXT) flexloader.$(OBJEXT) \ main.$(OBJEXT) flexloader_OBJECTS = $(am_flexloader_OBJECTS) flexloader_LDADD = $(LDADD) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(flexloader_SOURCES) DIST_SOURCES = $(flexloader_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ CLEANFILES = *~ *.bb *.bbg flexloader_SOURCES = byteblaster.h \ byteblaster.c \ flexloader.h \ flexloader.c \ main.h \ main.c all: all-am .SUFFIXES: .SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) flexloader$(EXEEXT): $(flexloader_OBJECTS) $(flexloader_DEPENDENCIES) @rm -f flexloader$(EXEEXT) $(LINK) $(flexloader_LDFLAGS) $(flexloader_OBJECTS) $(flexloader_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/byteblaster.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flexloader.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-binPROGRAMS install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-info-am .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ clean-generic ctags distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-binPROGRAMS \ install-data install-data-am install-exec install-exec-am \ install-info install-info-am install-man install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-binPROGRAMS uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: flexloader-0.03/src/byteblaster.h0000644000175000017500000000272710170344302013764 00000000000000/*************************************************************************** byteblaster.c - Low-level functions to access the byteblaster ------------------------------------------------------------- begin : Sun Jan 09 2005 copyright : (C) 2005 by Aurelien Jarno email : aurelien@aurel32.net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ #ifndef BYTEBLASTER_H #define BYTEBLASTER_H #ifdef HAVE_CONFIG_H #include #endif /* Subroutines */ int open_byteblaster(char *devicename); void close_byteblaster(int device); void enable_byteblaster(int device, int value); void set_DCLK(int device, int value); void set_nCONFIG(int device, int value); void set_DATA0(int device, int value); int get_nSTATUS(int device); int get_CONF_DONE(int device); #endif flexloader-0.03/src/byteblaster.c0000644000175000017500000001312110312354003013742 00000000000000/*************************************************************************** byteblaster.c - Low-level functions to access the byteblaster ------------------------------------------------------------- begin : Sun Jan 09 2005 copyright : (C) 2005 by Aurelien Jarno email : aurelien@aurel32.net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ /* Application specific includes */ #include "byteblaster.h" #include "main.h" /* Standard includes */ #include #include #include #include #ifdef HAVE_LINUX_PPDEV_H # include #endif #ifdef HAVE_LINUX_PARPORT_H # include #endif #ifdef HAVE_DEV_PPBUS_PPI_H # include #endif #ifdef HAVE_DEV_PPBUS_PPBCONF_H # include # define PPRDATA PPIGDATA # define PPWDATA PPISDATA # define PPRSTATUS PPIGSTATUS # define PPWSTATUS PPISSTATUS # define PPRCONTROL PPIGCTRL # define PPWCONTROL PPISCTRL # define PARPORT_CONTROL_AUTOFD AUTOFEED # define PARPORT_STATUS_ACK nACK # define PARPORT_STATUS_SELECT SELECT # define PARPORT_STATUS_BUSY nBUSY #endif /*************************************************************************** * * * Private functions * * * ***************************************************************************/ static void out_data(int device, unsigned char mask, unsigned char val) { static unsigned char data = 0; data = (data & ~mask) | val; ioctl(device, PPWDATA, &data); } static void set_AUTOFEED(int device, int value) { unsigned char control; ioctl(device, PPRCONTROL, &control); control &= ~PARPORT_CONTROL_AUTOFD; if (value != 0) control |= PARPORT_CONTROL_AUTOFD; ioctl(device, PPWCONTROL, &control); usleep(100000); } static void set_D5(int device, int value) { /* D5 */ out_data(device, 0x20, (value != 0)? 0x20 : 0x00); } static int get_ACK(int device) { unsigned char status; ioctl(device, PPRSTATUS, &status); return (status & PARPORT_STATUS_ACK) == PARPORT_STATUS_ACK; } static int open_parport(char *device_name) { int dev; if (debug) printf("Opening %s\n", device_name); dev = open(device_name, O_RDWR); #ifdef PPCLAIM if (dev < 0) { if (!quiet) perror("open"); return -1; } if (ioctl(dev, PPCLAIM) < 0) { if (!quiet) perror("open"); perror("ioctl"); close(dev); return -1; } #endif return dev; } static void close_parport(int device) { if (device) { #ifdef PPRELEASE ioctl(device, PPRELEASE); #endif close(device); } } static int detect_byteblaster(int device) { if (debug) printf("Detecting byteblaster\n"); /* ACK and D5 are connected together */ if (debug) printf("Driving D5 low\n"); set_D5(device, 0); usleep(10000); if (get_ACK(device) == 1) { if (debug) fprintf(stderr, "ACK stuck high\n"); return -1; } if (debug) printf("Driving D5 high\n"); set_D5(device, 1); usleep(10000); if (get_ACK(device) == 0) { if (debug) fprintf(stderr, "ACK stuck low\n"); return -1; } if (debug) printf("Driving D5 low\n"); set_D5(device, 0); usleep(10000); if (get_ACK(device) == 1) { if (debug) fprintf(stderr, "ACK stuck high\n"); return -1; } return 0; } /*************************************************************************** * * * Public functions * * * ***************************************************************************/ int get_nSTATUS(int device) { unsigned char status; ioctl(device, PPRSTATUS, &status); return (status & PARPORT_STATUS_SELECT) == PARPORT_STATUS_SELECT; } int get_CONF_DONE(int device) { unsigned char status; ioctl(device, PPRSTATUS, &status); return (status & PARPORT_STATUS_BUSY) != PARPORT_STATUS_BUSY; } void set_DCLK(int device, int value) { /* D0 */ out_data(device, 0x01, (value != 0)? 0x01 : 0x00); } void set_nCONFIG(int device, int value) { /* D1 */ out_data(device, 0x02, (value != 0)? 0x02 : 0x00); } void set_DATA0(int device, int value) { /* D6 */ out_data(device, 0x40, (value != 0)? 0x40 : 0x00); } int open_byteblaster(char *devicename) { int dev; dev = open_parport(devicename); if (dev < 0 ) { if (!quiet) fprintf(stderr, "Can't open %s!\n", devicename); return -1; } if (detect_byteblaster(dev) < 0) { if (!quiet) fprintf(stderr, "Byteblaster not found on %s!\n", devicename); close_byteblaster(dev); return -1; } return dev; } void close_byteblaster(int device) { enable_byteblaster(device, 0); close_parport(device); } void enable_byteblaster(int device, int value) { set_AUTOFEED(device, value); } flexloader-0.03/src/flexloader.h0000644000175000017500000000233610170345017013571 00000000000000/*************************************************************************** flexloader.h - Routines to download code to an Altera FLEX FPGA --------------------------------------------------------------- begin : Sun Jan 09 2005 copyright : (C) 2005 by Aurelien Jarno email : aurelien@aurel32.net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ #ifndef FLEXLOADER_H #define FLEXLOADER_H #ifdef HAVE_CONFIG_H #include #endif /* Subroutines */ int flex_download_program(char *device, char *rbf_file); #endif flexloader-0.03/src/flexloader.c0000644000175000017500000001214610170357111013562 00000000000000/*************************************************************************** flexloader.c - Routines to download code to an Altera FLEX FPGA --------------------------------------------------------------- begin : Sun Jan 09 2004 copyright : (C) 2005 by Aurelien Jarno email : aurelien@aurel32.net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ /* Application specific includes */ #include "flexloader.h" #include "byteblaster.h" #include "main.h" /* Standard includes */ #include #include #include #include #include #include /*************************************************************************** * * * Declarations * * * ***************************************************************************/ #define TIMEOUT 500 /* ms */ /*************************************************************************** * * * Private functions * * * ***************************************************************************/ static int flex_config(int device) { int t; set_DCLK(device, 0); set_DATA0(device, 1); set_nCONFIG(device, 1); enable_byteblaster(device, 1); usleep(100000); if (debug) printf("Configuring FLEX\n"); for (t = TIMEOUT / 10 ; t > 0 ; t--) { if (get_nSTATUS(device) == 1) break; usleep(10000); } if (t == 0) { if (!quiet) fprintf(stderr, "nSTATUS != 1\n"); return -1; } set_nCONFIG(device, 0); for (t = TIMEOUT / 10 ; t > 0 ; t--) { if (get_nSTATUS(device) == 0) break; usleep(10000); } if (t == 0) { if (!quiet) fprintf(stderr, "nSTATUS != 0\n"); return -1; } for (t = TIMEOUT / 10 ; t > 0 ; t--) { if (get_CONF_DONE(device) == 0) break; usleep(10000); } if (t == 0) { if (!quiet) fprintf(stderr, "CONF_DONE != 0\n"); return -1; } set_nCONFIG(device, 1); for (t = TIMEOUT / 10 ; t > 0 ; t--) { if (get_nSTATUS(device) == 1) break; usleep(10000); } if (t == 0) { if (!quiet) fprintf(stderr, "nSTATUS != 1\n"); return -1; } usleep(40000); return 0; } static int flex_download(int device, int file) { int byte, bit; unsigned char data; if (debug) printf("Downloading code\n"); for(byte = 0 ; ; byte++) { if (debug) printf("Downloading byte %i\n", byte); if (read(file, &data, 1) != 1) { if (!quiet) fprintf(stderr, "Unexpected end of file\n"); return -1; } for (bit = 0 ; bit < 8 ; bit++) { set_DATA0(device, data & 0x01); set_DCLK(device, 1); set_DCLK(device, 0); data >>= 1; if (get_nSTATUS(device) == 0) { if (!quiet) fprintf(stderr, "Checksum error\n"); return -1; } if (get_CONF_DONE(device) == 1) { if (!quiet) printf("%i bytes downloaded\n", byte); return 0; } } } } static void flex_init(int device) { int i; if (debug) printf("Initializing FLEX\n"); /* more clocks required to initialize the device */ for (i = 0 ; i < 10 ; i++) { set_DCLK(device, 1); set_DCLK(device, 0); } } /*************************************************************************** * * * Public functions * * * ***************************************************************************/ int flex_download_program(char *device, char *rbf_file) { int fd; int byteblaster; if (debug) printf("Opening %s\n", rbf_file); fd = open(rbf_file, O_RDONLY); if (fd < 0) { if (!quiet) { perror("open"); fprintf(stderr, "Can't open %s!\n", rbf_file); } return -1; } byteblaster = open_byteblaster(device); if (byteblaster < 0) return -1; if (flex_config(byteblaster) < 0) { if (!quiet) fprintf(stderr, "Altera FLEX not found!\n"); return -1; } if (flex_download(byteblaster, fd) < 0) { if (!quiet) fprintf(stderr, "Download failed\n"); return -1; } flex_init(byteblaster); close_byteblaster(byteblaster); close(fd); return 0; } flexloader-0.03/src/main.h0000644000175000017500000000222310170332164012362 00000000000000/*************************************************************************** main.h - Main program --------------------- begin : Mon Nov 24 2003 copyright : (C) 2003 by Aurelien Jarno emails : aurelien@aurel32.net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ #ifndef MAIN_H #define MAIN_H #ifdef HAVE_CONFIG_H #include #endif /* Variables */ extern int debug; extern int quiet; #endif flexloader-0.03/src/main.c0000644000175000017500000000742210170357264012373 00000000000000/*************************************************************************** main.c - Main program --------------------- begin : Sun Jan 09 2005 copyright : (C) 2005 by Aurelien Jarno email : aurelien@aurel32.net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ /* Application specific includes */ #include "main.h" #include "flexloader.h" /* Standard includes */ #include #include #include #include #include #include #include #include #include /*************************************************************************** * * * Declarations * * * ***************************************************************************/ /* Variables */ int debug = 0; int quiet = 0; /*************************************************************************** * * * Functions * * * ***************************************************************************/ static void print_usage(void) { printf("Usage: "PACKAGE" parport_device rbf_file\n" "\n" "Valid options are:\n" " -d, --debug Print debug messages.\n" " -h, --help Print this message.\n" " -q, --quiet Don't print any message.\n" " -v, --version Display "PACKAGE" version number.\n" "\n"); } static void print_banner(void) { if (!quiet) { printf(PACKAGE" version "VERSION"\n"); printf("(C) 2005 Aurelien Jarno\n\n"); } } int main(int argc, char* argv[]) { int c; int lindex = 0; static struct option long_options[] = { {"debug", no_argument, NULL, 'd'}, {"help", no_argument, NULL, 'h'}, {"quiet", no_argument, NULL, 'q'}, {"version", no_argument, NULL, 'v'}, {0, 0, 0, 0} }; while ((c = getopt_long (argc, argv, "dhqv", long_options, &lindex)) != -1) { printf("%c\n",c); switch (c) { case 'd': debug = 1; break; case 'h': print_banner(); print_usage(); exit(EXIT_SUCCESS); break; case 'q': quiet = 1; break; case 'v': print_banner(); exit(EXIT_SUCCESS); break; default: print_banner(); print_usage(); exit(EXIT_FAILURE); break; } } print_banner(); if (argc - optind != 2) { print_usage(); exit(EXIT_FAILURE); } if (flex_download_program(argv[optind], argv[optind + 1]) != 0) { if (!quiet) printf("Code NOT downloaded to the FPGA\n\n"); } else { if (!quiet) printf("Code successfully downloaded to the FPGA\n\n"); } return EXIT_SUCCESS; }