fuse-exfat-1.2.3/ 0000775 0001750 0001750 00000000000 12635220207 010566 5 0000000 0000000 fuse-exfat-1.2.3/ChangeLog 0000664 0001750 0001750 00000013176 12635220142 012266 0000000 0000000 1.2.3 (2015-12-19)
* Fixed clusters loss when file renaming replaces target.
1.2.2 (2015-11-09)
* Improved reliability in case of a sudden unplug: FS will be in a clean state
after closing all files and performing sync(1).
* Fixed compilation on Debian GNU/kFreeBSD and GNU/Hurd platforms.
* Updated mount.exfat-fuse man page.
1.2.1 (2015-09-24)
* Fixed compatibility with Zalman VE-200: now newly created directories do not
have archive bit set.
* Fixed heap corruption: malformed FS can use invalid sector or cluster size.
* Fixed hang on mount: malformed FS can have cyclic references in the clusters
map.
1.2.0 (2015-08-26)
* Switched from SCons to autotools.
* Added musl libc support [Brendan Heading].
* Worked around "FS is larger than device" error for memory cards formatted by
Panasonic Lumix cameras.
* Worked around "unknown entry type 0xe1" error for memory cards formatted by
Sony cameras.
1.1.1 (2014-11-15)
* Fixed mkfs crash on some sectors-per-cluster (-s option) values.
1.1.0 (2014-07-08)
* Relicensed the project from GPLv3+ to GPLv2+.
* OpenBSD support [Helg Bredow].
* Improved I/O errors handling.
* Implemented fsync() and fsyncdir().
* Fixed crash on Mac OS X 10.5 caused by non-standard use of realpath(). Also
fixed TrueCrypt disks unmounting.
* Avoid extra erase on writes to the end of a file. This should improve linear
write speed.
* Allow arbitrary changing of lower 9 bits of mode. Allow owner/group changing
to the same owner/group. This fixes rsync.
* Fixed buffers overflows when handling lengthy file names.
* Fixed "real size does not equal to size" error on volumes with pagefile.sys.
* Fixed negative IUsed in "df -i" output.
1.0.1 (2013-02-02)
* Fixed unexpected removal of a directory if it is moved into itself.
* Fixed "Operation not permitted" error on reading an empty file.
1.0.0 (2013-01-19)
* Fixed crash when renaming a file within a single directory and a new name
differs only in case.
* Fixed clusters allocation: a cluster beyond valid clusters range could be
allocated.
* Fixed crash when a volume is unmounted while some files are open.
* SConscript now respects AR and RANLIB environment variables.
* Improved error handling.
Linux:
* Enabled big_writes. This improves write speed (larger block size means less
switches between kernel- and user-space).
* Do BLKROGET ioctl to make sure the device is not read-only: after
"blockdev --setro" kernel still allows to open the device in read-write mode
but fails writes.
OS X:
* Fixed OS X 10.8 support.
* Switched to 64-bit inode numbers (now Mac OS X 10.5 or later is required).
* Switched from unmaintained MacFUSE to OSXFUSE (http://osxfuse.github.com).
* Fixed device size detection. Now mkfs works.
* Workarounded some utilities failures due to missing chmod() support.
* Disabled (senseless) permission checks made by FUSE.
0.9.8 (2012-08-09)
* The mkfs utility can now create huge file systems (up to several exabytes).
* Fixed handling of characters beyond Basic Multilingual Plane.
* Echo messages to syslog only if stderr is not connected to a terminal.
0.9.7 (2012-03-08)
* Out-of-the-box FreeBSD support (via ublio library).
* Fixed "missing EOD entry" error (could happen while reading directory that
consists of several clusters).
* Fixed interpretation of minutes field in files timestamps (minutes could be
displayed incorrectly).
* Fixed mtime seconds field initialization for newly created file (mtime could
be 1 sec less than creation time).
* SConscript now respects CC, CCFLAGS and LDFLAGS environment variables.
0.9.6 (2012-01-14)
* Fixed write performance regression introduced in 0.9.4.
* Mount in read-only mode if the device is write-protected.
* Set ctime to mtime to ensure we don't break programs that rely on ctime
(e.g. rsync considered that all files are outdated) [Eldad Zack].
* Indicate that FS in not clean when it was not cleanly unmounted.
* Utilities are now compatible with GNU/Hurd.
* Fixed several memory leaks that could occur on error handling paths.
* Improved handling of corrupted file systems.
0.9.5 (2011-05-15)
* Fixed erasing of the root directory cluster when creating a new FS with
mkexfatfs. This bug could cause mkexfatfs to produce invalid FS.
* Utilities are not linked with libfuse anymore.
* Ensure that the path being opened is either a device or a regular file.
0.9.4 (2011-03-05)
* Introduced exfat-utils: dumpexfat, exfatfsck, mkexfatfs, exfatlabel.
* Fixed "Invalid argument" error while mounting a volume from a disk with sector size greater than 512 bytes.
* Wait for all data to be flushed to disk on unmount.
* Kernel cache is no longer flushed on open. This can slightly improve read performance by avoiding extra read requests from kernel to user-space.
* Allow to unmount volumes as user (fusermount -u) if they were mounted from the very same user [Tino Lange].
* Errors and warnings are now duplicated to syslog.
0.9.3 (2010-09-25)
* Directories now can shrink.
* Improved timestamps resolution from 2 sec to 1 sec.
* Fixed timestamps displaying under Mac OS X when compiled for i386 or ppc.
* Fixed FS size displaying for non-GNU systems.
0.9.2 (2010-07-24)
* Fixed a bug which could cause the whole directory to become unreadable after renaming a file in it.
* Support for Solaris and various *BSD [Albert Lee].
* Improved error handling on corrupted volumes.
* Improved allowed file name characters filter.
* Added man page.
0.9.1 (2010-06-12)
* Implemented automounting (util-linux-ng 2.18 or later is required).
* Fixed mounting when cluster bitmap is larger than expected.
* Fixed crash on statfs() when root directory contains error.
* Fixed bugs specific to big-endian machines.
* Other bugfixes.
0.9.0 (2010-03-21)
* Initial release.
fuse-exfat-1.2.3/depcomp 0000755 0001750 0001750 00000056016 12566530340 012076 0000000 0000000 #! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2013-05-30.07; # UTC
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva .
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by 'PROGRAMS ARGS'.
object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
# Get the directory component of the given path, and save it in the
# global variables '$dir'. Note that this directory component will
# be either empty or ending with a '/' character. This is deliberate.
set_dir_from ()
{
case $1 in
*/*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
*) dir=;;
esac
}
# Get the suffix-stripped basename of the given path, and save it the
# global variable '$base'.
set_base_from ()
{
base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
}
# If no dependency file was actually created by the compiler invocation,
# we still have to create a dummy depfile, to avoid errors with the
# Makefile "include basename.Plo" scheme.
make_dummy_depfile ()
{
echo "#dummy" > "$depfile"
}
# Factor out some common post-processing of the generated depfile.
# Requires the auxiliary global variable '$tmpdepfile' to be set.
aix_post_process_depfile ()
{
# If the compiler actually managed to produce a dependency file,
# post-process it.
if test -f "$tmpdepfile"; then
# Each line is of the form 'foo.o: dependency.h'.
# Do two passes, one to just change these to
# $object: dependency.h
# and one to simply output
# dependency.h:
# which is needed to avoid the deleted-header problem.
{ sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
} > "$depfile"
rm -f "$tmpdepfile"
else
make_dummy_depfile
fi
}
# A tabulation character.
tab=' '
# A newline character.
nl='
'
# Character ranges might be problematic outside the C locale.
# These definitions help.
upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
lower=abcdefghijklmnopqrstuvwxyz
digits=0123456789
alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Avoid interferences from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
# This is just like msvc7 but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvc7
fi
if test "$depmode" = xlc; then
# IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
gccflag=-qmakedep=gcc,-MF
depmode=gcc
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say). Also, it might not be
## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The second -e expression handles DOS-style file names with drive
# letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
| tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
aix_post_process_depfile
;;
tcc)
# tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
# FIXME: That version still under development at the moment of writing.
# Make that this statement remains true also for stable, released
# versions.
# It will wrap lines (doesn't matter whether long or short) with a
# trailing '\', as in:
#
# foo.o : \
# foo.c \
# foo.h \
#
# It will put a trailing '\' even on the last line, and will use leading
# spaces rather than leading tabs (at least since its commit 0394caf7
# "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
# We have to change lines of the first kind to '$object: \'.
sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
# And for each line of the second kind, we have to emit a 'dep.h:'
# dummy dependency, to avoid the deleted-header problem.
sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file. A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
# Portland's C compiler understands '-MD'.
# Will always output deps to 'file.d' where file is the root name of the
# source file under compilation, even if file resides in a subdirectory.
# The object file name does not affect the name of the '.d' file.
# pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
set_base_from "$source"
tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
lockdir=$base.d-lock
trap "
echo '$0: caught signal, cleaning up...' >&2
rmdir '$lockdir'
exit 1
" 1 2 13 15
numtries=100
i=$numtries
while test $i -gt 0; do
# mkdir is a portable test-and-set.
if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
rmdir "$lockdir"
break
else
# If the lock is being held by a different process, wait
# until the winning process is done or we timeout.
while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
fi
i=`expr $i - 1`
done
trap - 1 2 13 15
if test $i -le 0; then
echo "$0: failed to acquire lock after $numtries attempts" >&2
echo "$0: check lockdir '$lockdir'" >&2
exit 1
fi
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
# Libtool generates 2 separate objects for the 2 libraries. These
# two compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir$base.o.d # libtool 1.5
tmpdepfile2=$dir.libs/$base.o.d # Likewise.
tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
# Same post-processing that is required for AIX mode.
aix_post_process_depfile
;;
msvc7)
if test "$libtool" = yes; then
showIncludes=-Wc,-showIncludes
else
showIncludes=-showIncludes
fi
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The first sed program below extracts the file names and escapes
# backslashes for cygpath. The second sed program outputs the file
# name when reading, but also accumulates all include files in the
# hold buffer in order to output them again at the end. This only
# works with sed implementations that can handle large buffers.
sed < "$tmpdepfile" -n '
/^Note: including file: *\(.*\)/ {
s//\1/
s/\\/\\\\/g
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
s/.*/'"$tab"'/
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
msvc7msys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this sed invocation
# correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process the last invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed '1,2d' "$tmpdepfile" \
| tr ' ' "$nl" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E \
| sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
| sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
fuse-exfat-1.2.3/configure 0000775 0001750 0001750 00000515013 12635220205 012420 0000000 0000000 #! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69 for Free exFAT implementation 1.2.3.
#
# Report bugs to .
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='print -r --'
as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there. '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# Use a proper internal environment variable to ensure we don't fall
# into an infinite loop, continuously re-executing ourselves.
if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
_as_can_reexec=no; export _as_can_reexec;
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
as_fn_exit 255
fi
# We don't want this to propagate to other subprocesses.
{ _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else
case \`(set -o) 2>/dev/null\` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
"
as_required="as_fn_return () { (exit \$1); }
as_fn_success () { as_fn_return 0; }
as_fn_failure () { as_fn_return 1; }
as_fn_ret_success () { return 0; }
as_fn_ret_failure () { return 1; }
exitcode=0
as_fn_success || { exitcode=1; echo as_fn_success failed.; }
as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
else
exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1
test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
else
as_have_required=no
fi
if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
as_found=:
case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
# Try only shells that exist, to save several forks.
as_shell=$as_dir/$as_base
if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
{ $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
CONFIG_SHELL=$as_shell as_have_required=yes
if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
break 2
fi
fi
done;;
esac
as_found=false
done
$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
{ $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
CONFIG_SHELL=$SHELL as_have_required=yes
fi; }
IFS=$as_save_IFS
if test "x$CONFIG_SHELL" != x; then :
export CONFIG_SHELL
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
if test x$as_have_required = xno; then :
$as_echo "$0: This script requires a shell more modern than all"
$as_echo "$0: the shells that I found on your system."
if test x${ZSH_VERSION+set} = xset ; then
$as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
$as_echo "$0: be upgraded to zsh 4.3.4 or later."
else
$as_echo "$0: Please tell bug-autoconf@gnu.org and
$0: relan@users.noreply.github.com about your system,
$0: including any error possibly output before this
$0: message. Then install a modern shell, or manually run
$0: the script under such a shell if you do have one."
fi
exit 1
fi
fi
fi
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
## --------------------- ##
## M4sh Shell Functions. ##
## --------------------- ##
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
$as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
$as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
as_lineno_1=$LINENO as_lineno_1a=$LINENO
as_lineno_2=$LINENO as_lineno_2a=$LINENO
eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
# Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# If we had to re-execute with $CONFIG_SHELL, we're ensured to have
# already done that, so ensure we don't try to do so again and fall
# in an infinite loop. This has already happened in practice.
_as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
test -n "$DJDIR" || exec 7<&0 &1
# Name of the host.
# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='Free exFAT implementation'
PACKAGE_TARNAME='fuse-exfat'
PACKAGE_VERSION='1.2.3'
PACKAGE_STRING='Free exFAT implementation 1.2.3'
PACKAGE_BUGREPORT='relan@users.noreply.github.com'
PACKAGE_URL='https://github.com/relan/exfat'
ac_subst_vars='am__EXEEXT_FALSE
am__EXEEXT_TRUE
LTLIBOBJS
LIBOBJS
FUSE_LIBS
FUSE_CFLAGS
PKG_CONFIG_LIBDIR
PKG_CONFIG_PATH
PKG_CONFIG
ac_ct_AR
AR
RANLIB
am__fastdepCC_FALSE
am__fastdepCC_TRUE
CCDEPMODE
am__nodep
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
am__quote
am__include
DEPDIR
OBJEXT
EXEEXT
ac_ct_CC
CPPFLAGS
LDFLAGS
CFLAGS
CC
AM_BACKSLASH
AM_DEFAULT_VERBOSITY
AM_DEFAULT_V
AM_V
am__untar
am__tar
AMTAR
am__leading_dot
SET_MAKE
AWK
mkdir_p
MKDIR_P
INSTALL_STRIP_PROGRAM
STRIP
install_sh
MAKEINFO
AUTOHEADER
AUTOMAKE
AUTOCONF
ACLOCAL
VERSION
PACKAGE
CYGPATH_W
am__isrc
INSTALL_DATA
INSTALL_SCRIPT
INSTALL_PROGRAM
target_alias
host_alias
build_alias
LIBS
ECHO_T
ECHO_N
ECHO_C
DEFS
mandir
localedir
libdir
psdir
pdfdir
dvidir
htmldir
infodir
docdir
oldincludedir
includedir
localstatedir
sharedstatedir
sysconfdir
datadir
datarootdir
libexecdir
sbindir
bindir
program_transform_name
prefix
exec_prefix
PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_silent_rules
enable_dependency_tracking
enable_largefile
'
ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
FUSE_CFLAGS
FUSE_LIBS'
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
ac_unrecognized_opts=
ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE
# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'
ac_prev=
ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval $ac_prev=\$ac_option
ac_prev=
continue
fi
case $ac_option in
*=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
*=) ac_optarg= ;;
*) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case $ac_dashdash$ac_option in
--)
ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
-datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
| --dataroo | --dataro | --datar)
ac_prev=datarootdir ;;
-datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
| --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"enable_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval enable_$ac_useropt=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
-docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
docdir=$ac_optarg ;;
-dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
ac_prev=dvidir ;;
-dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"enable_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval enable_$ac_useropt=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
ac_prev=htmldir ;;
-htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
| --ht=*)
htmldir=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localedir | --localedir | --localedi | --localed | --locale)
ac_prev=localedir ;;
-localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
localedir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
ac_prev=pdfdir ;;
-pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
pdfdir=$ac_optarg ;;
-psdir | --psdir | --psdi | --psd | --ps)
ac_prev=psdir ;;
-psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
psdir=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"with_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval with_$ac_useropt=\$ac_optarg ;;
-without-* | --without-*)
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"with_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval with_$ac_useropt=no ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
-*) as_fn_error $? "unrecognized option: \`$ac_option'
Try \`$0 --help' for more information"
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
# Check all directory arguments for consistency.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir
do
eval ac_val=\$$ac_var
# Remove trailing slashes.
case $ac_val in
*/ )
ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
eval $ac_var=\$ac_val;;
esac
# Be sure to have absolute directory names.
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias
# FIXME: To remove some day.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
fi
ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-
test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
ac_confdir=`$as_dirname -- "$as_myself" ||
$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_myself" : 'X\(//\)[^/]' \| \
X"$as_myself" : 'X\(//\)$' \| \
X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_myself" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
eval ac_env_${ac_var}_set=\${${ac_var}+set}
eval ac_env_${ac_var}_value=\$${ac_var}
eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
eval ac_cv_env_${ac_var}_value=\$${ac_var}
done
#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
\`configure' configures Free exFAT implementation 1.2.3 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/fuse-exfat]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
_ACEOF
fi
if test -n "$ac_init_help"; then
case $ac_init_help in
short | recursive ) echo "Configuration of Free exFAT implementation 1.2.3:";;
esac
cat <<\_ACEOF
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
speeds up one-time build
--disable-largefile omit support for large files
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L if you have libraries in a
nonstandard directory
LIBS libraries to pass to the linker, e.g. -l
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if
you have headers in a nonstandard directory
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
directories to add to pkg-config's search path
PKG_CONFIG_LIBDIR
path overriding pkg-config's built-in search path
FUSE_CFLAGS C compiler flags for FUSE, overriding pkg-config
FUSE_LIBS linker flags for FUSE, overriding pkg-config
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to .
Free exFAT implementation home page: .
_ACEOF
ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
test -d "$ac_dir" ||
{ cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
cd "$ac_dir" || { ac_status=$?; continue; }
# Check for guested configure.
if test -f "$ac_srcdir/configure.gnu"; then
echo &&
$SHELL "$ac_srcdir/configure.gnu" --help=recursive
elif test -f "$ac_srcdir/configure"; then
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
Free exFAT implementation configure 1.2.3
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
## ------------------------ ##
## Autoconf initialization. ##
## ------------------------ ##
# ac_fn_c_try_compile LINENO
# --------------------------
# Try to compile conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_compile ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
rm -f conftest.$ac_objext
if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
cat conftest.er1 >&5
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then :
ac_retval=0
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_compile
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by Free exFAT implementation $as_me 1.2.3, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
_ASUNAME
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
$as_echo "PATH: $as_dir"
done
IFS=$as_save_IFS
} >&5
cat >&5 <<_ACEOF
## ----------- ##
## Core tests. ##
## ----------- ##
_ACEOF
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
for ac_arg
do
case $ac_arg in
-no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
*\'*)
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
2)
as_fn_append ac_configure_args1 " '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
case $ac_arg in
*=* | --config-cache | -C | -disable-* | --disable-* \
| -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
| -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
| -with-* | --with-* | -without-* | --without-* | --x)
case "$ac_configure_args0 " in
"$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
esac
;;
-* ) ac_must_keep_next=true ;;
esac
fi
as_fn_append ac_configure_args " '$ac_arg'"
;;
esac
done
done
{ ac_configure_args0=; unset ac_configure_args0;}
{ ac_configure_args1=; unset ac_configure_args1;}
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
echo
$as_echo "## ---------------- ##
## Cache variables. ##
## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
sed -n \
"s/'\''/'\''\\\\'\'''\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
;; #(
*)
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
)
echo
$as_echo "## ----------------- ##
## Output variables. ##
## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
$as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
$as_echo "## ------------------- ##
## File substitutions. ##
## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
$as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
if test -s confdefs.h; then
$as_echo "## ----------- ##
## confdefs.h. ##
## ----------- ##"
echo
cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
$as_echo "$as_me: caught signal $ac_signal"
$as_echo "$as_me: exit $exit_status"
} >&5
rm -f core *.core core.conftest.* &&
rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
$as_echo "/* confdefs.h */" > confdefs.h
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_URL "$PACKAGE_URL"
_ACEOF
# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
# We do not want a PATH search for config.site.
case $CONFIG_SITE in #((
-*) ac_site_file1=./$CONFIG_SITE;;
*/*) ac_site_file1=$CONFIG_SITE;;
*) ac_site_file1=./$CONFIG_SITE;;
esac
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
else
ac_site_file1=$ac_default_prefix/share/config.site
ac_site_file2=$ac_default_prefix/etc/config.site
fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file" \
|| { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "failed to load site script $ac_site_file
See \`config.log' for more details" "$LINENO" 5; }
fi
done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special files
# actually), so we avoid doing that. DJGPP emulates it as a regular file.
if test /dev/null != "$cache_file" && test -f "$cache_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
*) . "./$cache_file";;
esac
fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val=\$ac_cv_env_${ac_var}_value
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
# differences in whitespace do not lead to failure.
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
*\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
*) as_fn_append ac_configure_args " '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
## -------------------- ##
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
am__api_version='1.15'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f "$ac_dir/install.sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
if ${ac_cv_path_install+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
# Account for people who put trailing slashes in PATH elements.
case $as_dir/ in #((
./ | .// | /[cC]/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
elif test $ac_prog = install &&
grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# program-specific install script used by HP pwplus--don't use.
:
else
rm -rf conftest.one conftest.two conftest.dir
echo one > conftest.one
echo two > conftest.two
mkdir conftest.dir
if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
test -s conftest.one && test -s conftest.two &&
test -s conftest.dir/conftest.one &&
test -s conftest.dir/conftest.two
then
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
break 3
fi
fi
fi
done
done
;;
esac
done
IFS=$as_save_IFS
rm -rf conftest.one conftest.two conftest.dir
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. Don't cache a
# value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$*" != "X $srcdir/configure conftest.file" \
&& test "$*" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
alias in your environment" "$LINENO" 5
fi
if test "$2" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$2" = conftest.file
)
then
# Ok.
:
else
as_fn_error $? "newly created file is older than distributed files!
Check your system clock" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
rm -f conftest.file
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s&\$&$program_suffix&;$program_transform_name"
# Double any \ or $.
# By default was `s,x,x', remove it if useless.
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
*)
MISSING="\${SHELL} $am_aux_dir/missing" ;;
esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_STRIP" = x; then
STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
STRIP=$ac_ct_STRIP
fi
else
STRIP="$ac_cv_prog_STRIP"
fi
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
if ${ac_cv_path_mkdir+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
'mkdir (GNU coreutils) '* | \
'mkdir (coreutils) '* | \
'mkdir (fileutils) '4.1*)
ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
break 3;;
esac
done
done
done
IFS=$as_save_IFS
fi
test -d ./--version && rmdir ./--version
if test "${ac_cv_path_mkdir+set}" = set; then
MKDIR_P="$ac_cv_path_mkdir -p"
else
# As a last resort, use the slow shell script. Don't cache a
# value for MKDIR_P within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
MKDIR_P="$ac_install_sh -d"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
$as_echo "$AWK" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$AWK" && break
done
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
*)
eval ac_cv_prog_make_${ac_make}_set=no;;
esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
# Check whether --enable-silent-rules was given.
if test "${enable_silent_rules+set}" = set; then :
enableval=$enable_silent_rules;
fi
case $enable_silent_rules in # (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=1;;
esac
am_make=${MAKE-make}
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
if ${am_cv_make_support_nested_variables+:} false; then :
$as_echo_n "(cached) " >&6
else
if $as_echo 'TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
$as_echo "$am_cv_make_support_nested_variables" >&6; }
if test $am_cv_make_support_nested_variables = yes; then
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AM_BACKSLASH='\'
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
# Define the identity of the package.
PACKAGE='fuse-exfat'
VERSION='1.2.3'
cat >>confdefs.h <<_ACEOF
#define PACKAGE "$PACKAGE"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define VERSION "$VERSION"
_ACEOF
# Some tools Automake needs.
ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
mkdir_p='$(MKDIR_P)'
# We need awk for the "check" target (and possibly the TAP driver). The
# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar pax cpio none'
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard:
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: .
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
fi
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
for ac_prog in cl.exe
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
for ac_prog in cl.exe
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$ac_ct_CC" && break
done
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
fi
fi
test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "no acceptable C compiler found in \$PATH
See \`config.log' for more details" "$LINENO" 5; }
# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
for ac_option in --version -v -V -qversion; do
{ { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compiler $ac_option >&5") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
sed '10a\
... rest of stderr output deleted ...
10q' conftest.err >conftest.er1
cat conftest.er1 >&5
fi
rm -f conftest.er1 conftest.err
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
done
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
$as_echo_n "checking whether the C compiler works... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
# The possible output files:
ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
ac_rmfiles=
for ac_file in $ac_files
do
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
* ) ac_rmfiles="$ac_rmfiles $ac_file";;
esac
done
rm -f $ac_rmfiles
if { { ac_try="$ac_link_default"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link_default") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then :
# Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile. We should not override ac_cv_exeext if it was cached,
# so that the user can short-circuit this test for compilers unknown to
# Autoconf.
for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
then :; else
ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
fi
# We set ac_cv_exeext here because the later test for it is not
# safe: cross compilers may not add the suffix if given an `-o'
# argument, so we may need to know it at that point already.
# Even if this section looks crufty: it has the advantage of
# actually working.
break;;
* )
break;;
esac
done
test "$ac_cv_exeext" = no && ac_cv_exeext=
else
ac_file=''
fi
if test -z "$ac_file"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "C compiler cannot create executables
See \`config.log' for more details" "$LINENO" 5; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
$as_echo "$ac_file" >&6; }
ac_exeext=$ac_cv_exeext
rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then :
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
break;;
* ) break;;
esac
done
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
int
main ()
{
FILE *f = fopen ("conftest.out", "w");
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
ac_clean_files="$ac_clean_files conftest.out"
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
$as_echo_n "checking whether we are cross compiling... " >&6; }
if test "$cross_compiling" != yes; then
{ { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if { ac_try='./conftest$ac_cv_exeext'
{ { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details" "$LINENO" 5; }
fi
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }
rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
if ${ac_cv_objext+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then :
for ac_file in conftest.o conftest.obj conftest.*; do
test -f "$ac_file" || continue;
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of object files: cannot compile
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_compiler_gnu=yes
else
ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
$as_echo "$ac_cv_c_compiler_gnu" >&6; }
if test $ac_compiler_gnu = yes; then
GCC=yes
else
GCC=
fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
ac_cv_prog_cc_g=no
CFLAGS="-g"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_g=yes
else
CFLAGS=""
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
else
ac_c_werror_flag=$ac_save_c_werror_flag
CFLAGS="-g"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_g=yes
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_c_werror_flag=$ac_save_c_werror_flag
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
if ${ac_cv_prog_cc_c89+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
#include
struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
char **p;
int i;
{
return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
char *s;
va_list v;
va_start (v,p);
s = g (p, va_arg (v,int));
va_end (v);
return s;
}
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
as 'x'. The following induces an error, until -std is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
that's true only with -std. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
inside strings and character constants. */
#define FOO(x) 'x'
int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
int
main ()
{
return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
;
return 0;
}
_ACEOF
for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_c89=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext
test "x$ac_cv_prog_cc_c89" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
x)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
xno)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c89"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
if test "x$ac_cv_prog_cc_c89" != xno; then :
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
if ${am_cv_prog_cc_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
$as_echo "$am_cv_prog_cc_c_o" >&6; }
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
am__quote=
_am_result=GNU
;;
esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=.include
am__quote="\""
_am_result=BSD
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
$as_echo "$_am_result" >&6; }
rm -f confinc confmf
# Check whether --enable-dependency-tracking was given.
if test "${enable_dependency_tracking+set}" = set; then :
enableval=$enable_dependency_tracking;
fi
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
AMDEP_TRUE='#'
AMDEP_FALSE=
fi
depcc="$CC" am_compiler_list=
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
$as_echo_n "checking dependency style of $depcc... " >&6; }
if ${am_cv_CC_dependencies_compiler_type+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_CC_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
am__universal=false
case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_CC_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_CC_dependencies_compiler_type=none
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
am__fastdepCC_FALSE='#'
else
am__fastdepCC_TRUE='#'
am__fastdepCC_FALSE=
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
if ${ac_cv_prog_cc_c99+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c99=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
#include
#include
#include
#include
// Check varargs macros. These examples are taken from C99 6.10.3.5.
#define debug(...) fprintf (stderr, __VA_ARGS__)
#define showlist(...) puts (#__VA_ARGS__)
#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
static void
test_varargs_macros (void)
{
int x = 1234;
int y = 5678;
debug ("Flag");
debug ("X = %d\n", x);
showlist (The first, second, and third items.);
report (x>y, "x is %d but y is %d", x, y);
}
// Check long long types.
#define BIG64 18446744073709551615ull
#define BIG32 4294967295ul
#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
#if !BIG_OK
your preprocessor is broken;
#endif
#if BIG_OK
#else
your preprocessor is broken;
#endif
static long long int bignum = -9223372036854775807LL;
static unsigned long long int ubignum = BIG64;
struct incomplete_array
{
int datasize;
double data[];
};
struct named_init {
int number;
const wchar_t *name;
double average;
};
typedef const char *ccp;
static inline int
test_restrict (ccp restrict text)
{
// See if C++-style comments work.
// Iterate through items via the restricted pointer.
// Also check for declarations in for loops.
for (unsigned int i = 0; *(text+i) != '\0'; ++i)
continue;
return 0;
}
// Check varargs and va_copy.
static void
test_varargs (const char *format, ...)
{
va_list args;
va_start (args, format);
va_list args_copy;
va_copy (args_copy, args);
const char *str;
int number;
float fnumber;
while (*format)
{
switch (*format++)
{
case 's': // string
str = va_arg (args_copy, const char *);
break;
case 'd': // int
number = va_arg (args_copy, int);
break;
case 'f': // float
fnumber = va_arg (args_copy, double);
break;
default:
break;
}
}
va_end (args_copy);
va_end (args);
}
int
main ()
{
// Check bool.
_Bool success = false;
// Check restrict.
if (test_restrict ("String literal") == 0)
success = true;
char *restrict newvar = "Another string";
// Check varargs.
test_varargs ("s, d' f .", "string", 65, 34.234);
test_varargs_macros ();
// Check flexible array members.
struct incomplete_array *ia =
malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
ia->datasize = 10;
for (int i = 0; i < ia->datasize; ++i)
ia->data[i] = i * 1.234;
// Check named initializers.
struct named_init ni = {
.number = 34,
.name = L"Test wide string",
.average = 543.34343,
};
ni.number = 58;
int dynamic_array[ni.number];
dynamic_array[ni.number - 1] = 543;
// work around unused variable warnings
return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
|| dynamic_array[ni.number - 1] != 543);
;
return 0;
}
_ACEOF
for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99
do
CC="$ac_save_CC $ac_arg"
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_c99=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext
test "x$ac_cv_prog_cc_c99" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c99" in
x)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
xno)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c99"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
esac
if test "x$ac_cv_prog_cc_c99" != xno; then :
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
$as_echo "$RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_RANLIB"; then
ac_ct_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
$as_echo "$ac_ct_RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_RANLIB" = x; then
RANLIB=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
RANLIB=$ac_ct_RANLIB
fi
else
RANLIB="$ac_cv_prog_RANLIB"
fi
if test -n "$ac_tool_prefix"; then
for ac_prog in ar lib "link -lib"
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
$as_echo "$AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$AR" && break
done
fi
if test -z "$AR"; then
ac_ct_AR=$AR
for ac_prog in ar lib "link -lib"
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AR"; then
ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_AR="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
$as_echo "$ac_ct_AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$ac_ct_AR" && break
done
if test "x$ac_ct_AR" = x; then
AR="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
fi
: ${AR=ar}
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
$as_echo_n "checking the archiver ($AR) interface... " >&6; }
if ${am_cv_ar_interface+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
am_cv_ar_interface=ar
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int some_variable = 0;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
(eval $am_ar_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if test "$ac_status" -eq 0; then
am_cv_ar_interface=ar
else
am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
(eval $am_ar_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if test "$ac_status" -eq 0; then
am_cv_ar_interface=lib
else
am_cv_ar_interface=unknown
fi
fi
rm -f conftest.lib libconftest.a
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
$as_echo "$am_cv_ar_interface" >&6; }
case $am_cv_ar_interface in
ar)
;;
lib)
# Microsoft lib, so override with the ar-lib wrapper script.
# FIXME: It is wrong to rewrite AR.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__AR in this case,
# and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
# similar.
AR="$am_aux_dir/ar-lib $AR"
;;
unknown)
as_fn_error $? "could not determine $AR interface" "$LINENO" 5
;;
esac
# Check whether --enable-largefile was given.
if test "${enable_largefile+set}" = set; then :
enableval=$enable_largefile;
fi
if test "$enable_largefile" != no; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
if ${ac_cv_sys_largefile_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_sys_largefile_CC=no
if test "$GCC" != yes; then
ac_save_CC=$CC
while :; do
# IRIX 6.2 and later do not support large files by default,
# so use the C compiler's -n32 option if that helps.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
/* Check that off_t can represent 2**63 - 1 correctly.
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
break
fi
rm -f core conftest.err conftest.$ac_objext
CC="$CC -n32"
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_sys_largefile_CC=' -n32'; break
fi
rm -f core conftest.err conftest.$ac_objext
break
done
CC=$ac_save_CC
rm -f conftest.$ac_ext
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
$as_echo "$ac_cv_sys_largefile_CC" >&6; }
if test "$ac_cv_sys_largefile_CC" != no; then
CC=$CC$ac_cv_sys_largefile_CC
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
if ${ac_cv_sys_file_offset_bits+:} false; then :
$as_echo_n "(cached) " >&6
else
while :; do
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
/* Check that off_t can represent 2**63 - 1 correctly.
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_sys_file_offset_bits=no; break
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#define _FILE_OFFSET_BITS 64
#include
/* Check that off_t can represent 2**63 - 1 correctly.
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_sys_file_offset_bits=64; break
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_sys_file_offset_bits=unknown
break
done
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
case $ac_cv_sys_file_offset_bits in #(
no | unknown) ;;
*)
cat >>confdefs.h <<_ACEOF
#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
_ACEOF
;;
esac
rm -rf conftest*
if test $ac_cv_sys_file_offset_bits = unknown; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
if ${ac_cv_sys_large_files+:} false; then :
$as_echo_n "(cached) " >&6
else
while :; do
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
/* Check that off_t can represent 2**63 - 1 correctly.
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_sys_large_files=no; break
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#define _LARGE_FILES 1
#include
/* Check that off_t can represent 2**63 - 1 correctly.
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_sys_large_files=1; break
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_sys_large_files=unknown
break
done
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
$as_echo "$ac_cv_sys_large_files" >&6; }
case $ac_cv_sys_large_files in #(
no | unknown) ;;
*)
cat >>confdefs.h <<_ACEOF
#define _LARGE_FILES $ac_cv_sys_large_files
_ACEOF
;;
esac
rm -rf conftest*
fi
fi
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_path_PKG_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $PKG_CONFIG in
[\\/]* | ?:[\\/]*)
ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG
if test -n "$PKG_CONFIG"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
$as_echo "$PKG_CONFIG" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_path_PKG_CONFIG"; then
ac_pt_PKG_CONFIG=$PKG_CONFIG
# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $ac_pt_PKG_CONFIG in
[\\/]* | ?:[\\/]*)
ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
;;
esac
fi
ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
if test -n "$ac_pt_PKG_CONFIG"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
$as_echo "$ac_pt_PKG_CONFIG" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_pt_PKG_CONFIG" = x; then
PKG_CONFIG=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
PKG_CONFIG=$ac_pt_PKG_CONFIG
fi
else
PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
fi
fi
if test -n "$PKG_CONFIG"; then
_pkg_min_version=0.9.0
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
PKG_CONFIG=""
fi
fi
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FUSE" >&5
$as_echo_n "checking for FUSE... " >&6; }
if test -n "$FUSE_CFLAGS"; then
pkg_cv_FUSE_CFLAGS="$FUSE_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"fuse\""; } >&5
($PKG_CONFIG --exists --print-errors "fuse") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_FUSE_CFLAGS=`$PKG_CONFIG --cflags "fuse" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test -n "$FUSE_LIBS"; then
pkg_cv_FUSE_LIBS="$FUSE_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"fuse\""; } >&5
($PKG_CONFIG --exists --print-errors "fuse") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_FUSE_LIBS=`$PKG_CONFIG --libs "fuse" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test $pkg_failed = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
FUSE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "fuse" 2>&1`
else
FUSE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "fuse" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$FUSE_PKG_ERRORS" >&5
as_fn_error $? "Package requirements (fuse) were not met:
$FUSE_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables FUSE_CFLAGS
and FUSE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables FUSE_CFLAGS
and FUSE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see .
See \`config.log' for more details" "$LINENO" 5; }
else
FUSE_CFLAGS=$pkg_cv_FUSE_CFLAGS
FUSE_LIBS=$pkg_cv_FUSE_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
ac_config_headers="$ac_config_headers libexfat/config.h"
ac_config_files="$ac_config_files libexfat/Makefile fuse/Makefile Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems. If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
_ACEOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes: double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
) |
sed '
/^ac_cv_env_/b end
t clear
:clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
if test "x$cache_file" != "x/dev/null"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
if test ! -f "$cache_file" || test -h "$cache_file"; then
cat confcache >"$cache_file"
else
case $cache_file in #(
*/* | ?:*)
mv -f confcache "$cache_file"$$ &&
mv -f "$cache_file"$$ "$cache_file" ;; #(
*)
mv -f confcache "$cache_file" ;;
esac
fi
fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
$as_echo_n "checking that generated files are newer than configure... " >&6; }
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
$as_echo "done" >&6; }
if test -n "$EXEEXT"; then
am__EXEEXT_TRUE=
am__EXEEXT_FALSE='#'
else
am__EXEEXT_TRUE='#'
am__EXEEXT_FALSE=
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
as_fn_error $? "conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
as_write_fail=0
cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='print -r --'
as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there. '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
$as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
$as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
## ----------------------------------- ##
## Main body of $CONFIG_STATUS script. ##
## ----------------------------------- ##
_ASEOF
test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by Free exFAT implementation $as_me 1.2.3, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
on `(hostname || uname -n) 2>/dev/null | sed 1q`
"
_ACEOF
case $ac_config_files in *"
"*) set x $ac_config_files; shift; ac_config_files=$*;;
esac
case $ac_config_headers in *"
"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
esac
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
config_commands="$ac_config_commands"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
\`$as_me' instantiates files and other configuration actions
from templates according to the current configuration. Unless the files
and actions are specified as TAGs, all are instantiated by default.
Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
--config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
instantiate the configuration header FILE
Configuration files:
$config_files
Configuration headers:
$config_headers
Configuration commands:
$config_commands
Report bugs to .
Free exFAT implementation home page: ."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
Free exFAT implementation config.status 1.2.3
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
MKDIR_P='$MKDIR_P'
AWK='$AWK'
test -n "\$AWK" || AWK=awk
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
--*=)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=
ac_shift=:
;;
*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
--config | --confi | --conf | --con | --co | --c )
$as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
'') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append CONFIG_HEADERS " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
-*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
shift
done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
export CONFIG_SHELL
exec "\$@"
fi
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
$as_echo "$ac_log"
} >&5
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
# INIT-COMMANDS
#
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Handling of arguments.
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"libexfat/config.h") CONFIG_HEADERS="$CONFIG_HEADERS libexfat/config.h" ;;
"libexfat/Makefile") CONFIG_FILES="$CONFIG_FILES libexfat/Makefile" ;;
"fuse/Makefile") CONFIG_FILES="$CONFIG_FILES fuse/Makefile" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
tmp= ac_tmp=
trap 'exit_status=$?
: "${ac_tmp:=$tmp}"
{ test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then
ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
{
echo "cat >conf$$subs.awk <<_ACEOF" &&
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
s/^/S["/; s/!.*/"]=/
p
g
s/^[^!]*!//
:repl
t repl
s/'"$ac_delim"'$//
t delim
:nl
h
s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
n
b repl
:more1
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t nl
:delim
h
s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
b
:more2
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t delim
' >$CONFIG_STATUS || ac_write_fail=1
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = ""
}
{
line = $ 0
nfields = split(line, field, "@")
substed = 0
len = length(field[1])
for (i = 2; i < nfields; i++) {
key = field[i]
keylen = length(key)
if (S_is_set[key]) {
value = S[key]
line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
len += length(value) + length(field[++i])
substed = 1
} else
len += 1 + keylen
}
print line
}
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
|| as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
h
s///
s/^/:/
s/[ ]*$/:/
s/:\$(srcdir):/:/g
s/:\${srcdir}:/:/g
s/:@srcdir@:/:/g
s/^:*//
s/:*$//
x
s/\(=[ ]*\).*/\1/
G
s/\n//
s/^[^=]*=[ ]*$//
}'
fi
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"
# Set up the scripts for CONFIG_HEADERS section.
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF
# Transform confdefs.h into an awk script `defines.awk', embedded as
# here-document in config.status, that substitutes the proper values into
# config.h.in to produce config.h.
# Create a delimiter string that does not exist in confdefs.h, to ease
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
if test -z "$ac_tt"; then
break
elif $ac_last_try; then
as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
# For the awk script, D is an array of macro values keyed by name,
# likewise P contains macro parameters if any. Preserve backslash
# newline sequences.
ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
sed -n '
s/.\{148\}/&'"$ac_delim"'/g
t rset
:rset
s/^[ ]*#[ ]*define[ ][ ]*/ /
t def
d
:def
s/\\$//
t bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3"/p
s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
d
:bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3\\\\\\n"\\/p
t cont
s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
t cont
d
:cont
n
s/.\{148\}/&'"$ac_delim"'/g
t clear
:clear
s/\\$//
t bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/"/p
d
:bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
b cont
' >$CONFIG_STATUS || ac_write_fail=1
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
for (key in D) D_is_set[key] = 1
FS = ""
}
/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
line = \$ 0
split(line, arg, " ")
if (arg[1] == "#") {
defundef = arg[2]
mac1 = arg[3]
} else {
defundef = substr(arg[1], 2)
mac1 = arg[2]
}
split(mac1, mac2, "(") #)
macro = mac2[1]
prefix = substr(line, 1, index(line, defundef) - 1)
if (D_is_set[macro]) {
# Preserve the white space surrounding the "#".
print prefix "define", macro P[macro] D[macro]
next
} else {
# Replace #undef with comments. This is necessary, for example,
# in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
if (defundef == "undef") {
print "/*", prefix defundef, macro, "*/"
next
}
}
}
{ print }
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
shift
for ac_tag
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
:L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
ac_save_IFS=$IFS
IFS=:
set x $ac_tag
IFS=$ac_save_IFS
shift
ac_file=$1
shift
case $ac_mode in
:L) ac_source=$1;;
:[FH])
ac_file_inputs=
for ac_f
do
case $ac_f in
-) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
test -f "$ac_f" ||
case $ac_f in
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
configure_input='Generated from '`
$as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
case $configure_input in #(
*\&* | *\|* | *\\* )
ac_sed_conf_input=`$as_echo "$configure_input" |
sed 's/[\\\\&|]/\\\\&/g'`;; #(
*) ac_sed_conf_input=$configure_input;;
esac
case $ac_tag in
*:-:* | *:-) cat >"$ac_tmp/stdin" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
case $ac_mode in
:F)
#
# CONFIG_FILE
#
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
ac_MKDIR_P=$MKDIR_P
case $MKDIR_P in
[\\/$]* | ?:[\\/]* ) ;;
*/*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
p
q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
>$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
"$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&2;}
rm -f "$ac_tmp/stdin"
case $ac_file in
-) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
*) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
# CONFIG_HEADER
#
if test x"$ac_file" != x-; then
{
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
} >"$ac_tmp/config.h" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
mv "$ac_tmp/config.h" "$ac_file" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
|| as_fn_error $? "could not create -" "$LINENO" 5
fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$_am_arg" : 'X\(//\)[^/]' \| \
X"$_am_arg" : 'X\(//\)$' \| \
X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$_am_arg" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`/stamp-h$_am_stamp_count
;;
:C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
;;
esac
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
*\'*) eval set x "$CONFIG_FILES" ;;
*) set x $CONFIG_FILES ;;
esac
shift
for mf
do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
X"$file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir=$dirpart/$fdir; as_fn_mkdir_p
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
}
;;
esac
done # for ac_tag
as_fn_exit 0
_ACEOF
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
fuse-exfat-1.2.3/configure.ac 0000664 0001750 0001750 00000002347 12635220203 012776 0000000 0000000 #
# configure.ac (30.03.15)
# Autoconf source.
#
# Free exFAT implementation.
# Copyright (C) 2010-2015 Andrew Nayenko
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
AC_INIT([Free exFAT implementation],
[1.2.3],
[relan@users.noreply.github.com],
[fuse-exfat],
[https://github.com/relan/exfat])
AM_INIT_AUTOMAKE([1.11.2 -Wall -Werror foreign subdir-objects no-installman])
AC_PROG_CC
AC_PROG_CC_C99
AC_PROG_RANLIB
AM_PROG_AR
AC_SYS_LARGEFILE
PKG_CHECK_MODULES([FUSE], [fuse])
AC_CONFIG_HEADERS([libexfat/config.h])
AC_CONFIG_FILES([
libexfat/Makefile
fuse/Makefile
Makefile])
AC_OUTPUT
fuse-exfat-1.2.3/Makefile.am 0000664 0001750 0001750 00000001524 12635220203 012540 0000000 0000000 #
# Makefile.am (30.03.15)
# Automake source.
#
# Free exFAT implementation.
# Copyright (C) 2010-2015 Andrew Nayenko
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
SUBDIRS = libexfat fuse
fuse-exfat-1.2.3/compile 0000755 0001750 0001750 00000016245 12566530340 012077 0000000 0000000 #! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2012-10-14.11; # UTC
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# Written by Tom Tromey .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
fuse-exfat-1.2.3/install-sh 0000755 0001750 0001750 00000034523 12566530340 012524 0000000 0000000 #!/bin/sh
# install - install a program, script, or datafile
scriptversion=2013-12-25.23; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
tab=' '
nl='
'
IFS=" $tab$nl"
# Set DOITPROG to "echo" to test this script.
doit=${DOITPROG-}
doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t)
is_target_a_directory=always
dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
# We allow the use of options -d and -T together, by making -d
# take the precedence; this is for compatibility with GNU install.
if test -n "$dir_arg"; then
if test -n "$dst_arg"; then
echo "$0: target directory not allowed when installing a directory." >&2
exit 1
fi
fi
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
if test $# -gt 1 || test "$is_target_a_directory" = always; then
if test ! -d "$dst_arg"; then
echo "$0: $dst_arg: Is not a directory." >&2
exit 1
fi
fi
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test "$is_target_a_directory" = never; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
esac
oIFS=$IFS
IFS=/
set -f
set fnord $dstdir
shift
set +f
IFS=$oIFS
prefixes=
for d
do
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
fuse-exfat-1.2.3/missing 0000755 0001750 0001750 00000015330 12566530340 012112 0000000 0000000 #! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2013-10-28.13; # UTC
# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
case $1 in
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
Supported PROGRAM values:
aclocal autoconf autoheader autom4te automake makeinfo
bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to ."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
perl_URL=http://www.perl.org/
flex_URL=http://flex.sourceforge.net/
gnu_software_URL=http://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
fuse-exfat-1.2.3/libexfat/ 0000775 0001750 0001750 00000000000 12635220207 012364 5 0000000 0000000 fuse-exfat-1.2.3/libexfat/node.c 0000664 0001750 0001750 00000076313 12635220142 013405 0000000 0000000 /*
node.c (09.10.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
#include
#include
/* on-disk nodes iterator */
struct iterator
{
cluster_t cluster;
off_t offset;
int contiguous;
char* chunk;
};
struct exfat_node* exfat_get_node(struct exfat_node* node)
{
/* if we switch to multi-threaded mode we will need atomic
increment here and atomic decrement in exfat_put_node() */
node->references++;
return node;
}
void exfat_put_node(struct exfat* ef, struct exfat_node* node)
{
char buffer[UTF8_BYTES(EXFAT_NAME_MAX) + 1];
--node->references;
if (node->references < 0)
{
exfat_get_name(node, buffer, sizeof(buffer) - 1);
exfat_bug("reference counter of '%s' is below zero", buffer);
}
else if (node->references == 0 && node != ef->root)
{
if (node->flags & EXFAT_ATTRIB_DIRTY)
{
exfat_get_name(node, buffer, sizeof(buffer) - 1);
exfat_warn("dirty node '%s' with zero references", buffer);
}
}
}
/**
* This function must be called on rmdir and unlink (after the last
* exfat_put_node()) to free clusters.
*/
int exfat_cleanup_node(struct exfat* ef, struct exfat_node* node)
{
int rc = 0;
if (node->references != 0)
exfat_bug("unable to cleanup a node with %d references",
node->references);
if (node->flags & EXFAT_ATTRIB_UNLINKED)
{
/* free all clusters and node structure itself */
rc = exfat_truncate(ef, node, 0, true);
/* free the node even in case of error or its memory will be lost */
free(node);
}
return rc;
}
/**
* Cluster + offset from the beginning of the directory to absolute offset.
*/
static off_t co2o(struct exfat* ef, cluster_t cluster, off_t offset)
{
return exfat_c2o(ef, cluster) + offset % CLUSTER_SIZE(*ef->sb);
}
static int opendir(struct exfat* ef, const struct exfat_node* dir,
struct iterator* it)
{
if (!(dir->flags & EXFAT_ATTRIB_DIR))
exfat_bug("not a directory");
it->cluster = dir->start_cluster;
it->offset = 0;
it->contiguous = IS_CONTIGUOUS(*dir);
it->chunk = malloc(CLUSTER_SIZE(*ef->sb));
if (it->chunk == NULL)
{
exfat_error("out of memory");
return -ENOMEM;
}
if (exfat_pread(ef->dev, it->chunk, CLUSTER_SIZE(*ef->sb),
exfat_c2o(ef, it->cluster)) < 0)
{
exfat_error("failed to read directory cluster %#x", it->cluster);
return -EIO;
}
return 0;
}
static void closedir(struct iterator* it)
{
it->cluster = 0;
it->offset = 0;
it->contiguous = 0;
free(it->chunk);
it->chunk = NULL;
}
static bool fetch_next_entry(struct exfat* ef, const struct exfat_node* parent,
struct iterator* it)
{
/* move iterator to the next entry in the directory */
it->offset += sizeof(struct exfat_entry);
/* fetch the next cluster if needed */
if ((it->offset & (CLUSTER_SIZE(*ef->sb) - 1)) == 0)
{
/* reached the end of directory; the caller should check this
condition too */
if (it->offset >= parent->size)
return true;
it->cluster = exfat_next_cluster(ef, parent, it->cluster);
if (CLUSTER_INVALID(it->cluster))
{
exfat_error("invalid cluster 0x%x while reading directory",
it->cluster);
return false;
}
if (exfat_pread(ef->dev, it->chunk, CLUSTER_SIZE(*ef->sb),
exfat_c2o(ef, it->cluster)) < 0)
{
exfat_error("failed to read the next directory cluster %#x",
it->cluster);
return false;
}
}
return true;
}
static struct exfat_node* allocate_node(void)
{
struct exfat_node* node = malloc(sizeof(struct exfat_node));
if (node == NULL)
{
exfat_error("failed to allocate node");
return NULL;
}
memset(node, 0, sizeof(struct exfat_node));
return node;
}
static void init_node_meta1(struct exfat_node* node,
const struct exfat_entry_meta1* meta1)
{
node->flags = le16_to_cpu(meta1->attrib);
node->mtime = exfat_exfat2unix(meta1->mdate, meta1->mtime,
meta1->mtime_cs);
/* there is no centiseconds field for atime */
node->atime = exfat_exfat2unix(meta1->adate, meta1->atime, 0);
}
static void init_node_meta2(struct exfat_node* node,
const struct exfat_entry_meta2* meta2)
{
node->size = le64_to_cpu(meta2->size);
node->start_cluster = le32_to_cpu(meta2->start_cluster);
node->fptr_cluster = node->start_cluster;
if (meta2->flags & EXFAT_FLAG_CONTIGUOUS)
node->flags |= EXFAT_ATTRIB_CONTIGUOUS;
}
static const struct exfat_entry* get_entry_ptr(const struct exfat* ef,
const struct iterator* it)
{
return (const struct exfat_entry*)
(it->chunk + it->offset % CLUSTER_SIZE(*ef->sb));
}
static bool check_node(const struct exfat_node* node, uint16_t actual_checksum,
uint16_t reference_checksum, uint64_t valid_size)
{
char buffer[UTF8_BYTES(EXFAT_NAME_MAX) + 1];
/*
Validate checksum first. If it's invalid all other fields probably
contain just garbage.
*/
if (actual_checksum != reference_checksum)
{
exfat_get_name(node, buffer, sizeof(buffer) - 1);
exfat_error("'%s' has invalid checksum (%#hx != %#hx)", buffer,
actual_checksum, reference_checksum);
return false;
}
/*
exFAT does not support sparse files but allows files with uninitialized
clusters. For such files valid_size means initialized data size and
cannot be greater than file size. See SetFileValidData() function
description in MSDN.
*/
if (valid_size > node->size)
{
exfat_get_name(node, buffer, sizeof(buffer) - 1);
exfat_error("'%s' has valid size (%"PRIu64") greater than size "
"(%"PRIu64")", buffer, valid_size, node->size);
return false;
}
return true;
}
/*
* Reads one entry in directory at position pointed by iterator and fills
* node structure.
*/
static int readdir(struct exfat* ef, const struct exfat_node* parent,
struct exfat_node** node, struct iterator* it)
{
int rc = -EIO;
const struct exfat_entry* entry;
const struct exfat_entry_meta1* meta1;
const struct exfat_entry_meta2* meta2;
const struct exfat_entry_name* file_name;
const struct exfat_entry_upcase* upcase;
const struct exfat_entry_bitmap* bitmap;
const struct exfat_entry_label* label;
uint8_t continuations = 0;
le16_t* namep = NULL;
uint16_t reference_checksum = 0;
uint16_t actual_checksum = 0;
uint64_t valid_size = 0;
*node = NULL;
for (;;)
{
if (it->offset >= parent->size)
{
if (continuations != 0)
{
exfat_error("expected %hhu continuations", continuations);
goto error;
}
return -ENOENT; /* that's OK, means end of directory */
}
entry = get_entry_ptr(ef, it);
switch (entry->type)
{
case EXFAT_ENTRY_FILE:
if (continuations != 0)
{
exfat_error("expected %hhu continuations before new entry",
continuations);
goto error;
}
meta1 = (const struct exfat_entry_meta1*) entry;
continuations = meta1->continuations;
/* each file entry must have at least 2 continuations:
info and name */
if (continuations < 2)
{
exfat_error("too few continuations (%hhu)", continuations);
goto error;
}
if (continuations > 1 +
DIV_ROUND_UP(EXFAT_NAME_MAX, EXFAT_ENAME_MAX))
{
exfat_error("too many continuations (%hhu)", continuations);
goto error;
}
reference_checksum = le16_to_cpu(meta1->checksum);
actual_checksum = exfat_start_checksum(meta1);
*node = allocate_node();
if (*node == NULL)
{
rc = -ENOMEM;
goto error;
}
/* new node has zero reference counter */
(*node)->entry_cluster = it->cluster;
(*node)->entry_offset = it->offset;
init_node_meta1(*node, meta1);
namep = (*node)->name;
break;
case EXFAT_ENTRY_FILE_INFO:
if (continuations < 2)
{
exfat_error("unexpected continuation (%hhu)",
continuations);
goto error;
}
meta2 = (const struct exfat_entry_meta2*) entry;
if (meta2->flags & ~(EXFAT_FLAG_ALWAYS1 | EXFAT_FLAG_CONTIGUOUS))
{
exfat_error("unknown flags in meta2 (0x%hhx)", meta2->flags);
goto error;
}
init_node_meta2(*node, meta2);
actual_checksum = exfat_add_checksum(entry, actual_checksum);
valid_size = le64_to_cpu(meta2->valid_size);
/* empty files must be marked as non-contiguous */
if ((*node)->size == 0 && (meta2->flags & EXFAT_FLAG_CONTIGUOUS))
{
exfat_error("empty file marked as contiguous (0x%hhx)",
meta2->flags);
goto error;
}
/* directories must be aligned on at cluster boundary */
if (((*node)->flags & EXFAT_ATTRIB_DIR) &&
(*node)->size % CLUSTER_SIZE(*ef->sb) != 0)
{
exfat_error("directory has invalid size %"PRIu64" bytes",
(*node)->size);
goto error;
}
--continuations;
break;
case EXFAT_ENTRY_FILE_NAME:
if (continuations == 0)
{
exfat_error("unexpected continuation");
goto error;
}
file_name = (const struct exfat_entry_name*) entry;
actual_checksum = exfat_add_checksum(entry, actual_checksum);
memcpy(namep, file_name->name,
MIN(EXFAT_ENAME_MAX,
((*node)->name + EXFAT_NAME_MAX - namep)) *
sizeof(le16_t));
namep += EXFAT_ENAME_MAX;
if (--continuations == 0)
{
if (!check_node(*node, actual_checksum, reference_checksum,
valid_size))
goto error;
if (!fetch_next_entry(ef, parent, it))
goto error;
return 0; /* entry completed */
}
break;
case EXFAT_ENTRY_UPCASE:
if (ef->upcase != NULL)
break;
upcase = (const struct exfat_entry_upcase*) entry;
if (CLUSTER_INVALID(le32_to_cpu(upcase->start_cluster)))
{
exfat_error("invalid cluster 0x%x in upcase table",
le32_to_cpu(upcase->start_cluster));
goto error;
}
if (le64_to_cpu(upcase->size) == 0 ||
le64_to_cpu(upcase->size) > 0xffff * sizeof(uint16_t) ||
le64_to_cpu(upcase->size) % sizeof(uint16_t) != 0)
{
exfat_error("bad upcase table size (%"PRIu64" bytes)",
le64_to_cpu(upcase->size));
goto error;
}
ef->upcase = malloc(le64_to_cpu(upcase->size));
if (ef->upcase == NULL)
{
exfat_error("failed to allocate upcase table (%"PRIu64" bytes)",
le64_to_cpu(upcase->size));
rc = -ENOMEM;
goto error;
}
ef->upcase_chars = le64_to_cpu(upcase->size) / sizeof(le16_t);
if (exfat_pread(ef->dev, ef->upcase, le64_to_cpu(upcase->size),
exfat_c2o(ef, le32_to_cpu(upcase->start_cluster))) < 0)
{
exfat_error("failed to read upper case table "
"(%"PRIu64" bytes starting at cluster %#x)",
le64_to_cpu(upcase->size),
le32_to_cpu(upcase->start_cluster));
goto error;
}
break;
case EXFAT_ENTRY_BITMAP:
bitmap = (const struct exfat_entry_bitmap*) entry;
ef->cmap.start_cluster = le32_to_cpu(bitmap->start_cluster);
if (CLUSTER_INVALID(ef->cmap.start_cluster))
{
exfat_error("invalid cluster 0x%x in clusters bitmap",
ef->cmap.start_cluster);
goto error;
}
ef->cmap.size = le32_to_cpu(ef->sb->cluster_count) -
EXFAT_FIRST_DATA_CLUSTER;
if (le64_to_cpu(bitmap->size) < DIV_ROUND_UP(ef->cmap.size, 8))
{
exfat_error("invalid clusters bitmap size: %"PRIu64
" (expected at least %u)",
le64_to_cpu(bitmap->size),
DIV_ROUND_UP(ef->cmap.size, 8));
goto error;
}
/* FIXME bitmap can be rather big, up to 512 MB */
ef->cmap.chunk_size = ef->cmap.size;
ef->cmap.chunk = malloc(BMAP_SIZE(ef->cmap.chunk_size));
if (ef->cmap.chunk == NULL)
{
exfat_error("failed to allocate clusters bitmap chunk "
"(%"PRIu64" bytes)", le64_to_cpu(bitmap->size));
rc = -ENOMEM;
goto error;
}
if (exfat_pread(ef->dev, ef->cmap.chunk,
BMAP_SIZE(ef->cmap.chunk_size),
exfat_c2o(ef, ef->cmap.start_cluster)) < 0)
{
exfat_error("failed to read clusters bitmap "
"(%"PRIu64" bytes starting at cluster %#x)",
le64_to_cpu(bitmap->size), ef->cmap.start_cluster);
goto error;
}
break;
case EXFAT_ENTRY_LABEL:
label = (const struct exfat_entry_label*) entry;
if (label->length > EXFAT_ENAME_MAX)
{
exfat_error("too long label (%hhu chars)", label->length);
goto error;
}
if (utf16_to_utf8(ef->label, label->name,
sizeof(ef->label) - 1, EXFAT_ENAME_MAX) != 0)
goto error;
break;
default:
if (!(entry->type & EXFAT_ENTRY_VALID))
break; /* deleted entry, ignore it */
if (!(entry->type & EXFAT_ENTRY_OPTIONAL))
{
exfat_error("unknown entry type %#hhx", entry->type);
goto error;
}
/* optional entry, warn and skip */
exfat_warn("unknown entry type %#hhx", entry->type);
if (continuations == 0)
{
exfat_error("unexpected continuation");
goto error;
}
--continuations;
break;
}
if (!fetch_next_entry(ef, parent, it))
goto error;
}
/* we never reach here */
error:
free(*node);
*node = NULL;
return rc;
}
int exfat_cache_directory(struct exfat* ef, struct exfat_node* dir)
{
struct iterator it;
int rc;
struct exfat_node* node;
struct exfat_node* current = NULL;
if (dir->flags & EXFAT_ATTRIB_CACHED)
return 0; /* already cached */
rc = opendir(ef, dir, &it);
if (rc != 0)
return rc;
while ((rc = readdir(ef, dir, &node, &it)) == 0)
{
node->parent = dir;
if (current != NULL)
{
current->next = node;
node->prev = current;
}
else
dir->child = node;
current = node;
}
closedir(&it);
if (rc != -ENOENT)
{
/* rollback */
for (current = dir->child; current; current = node)
{
node = current->next;
free(current);
}
dir->child = NULL;
return rc;
}
dir->flags |= EXFAT_ATTRIB_CACHED;
return 0;
}
static void tree_attach(struct exfat_node* dir, struct exfat_node* node)
{
node->parent = dir;
if (dir->child)
{
dir->child->prev = node;
node->next = dir->child;
}
dir->child = node;
}
static void tree_detach(struct exfat_node* node)
{
if (node->prev)
node->prev->next = node->next;
else /* this is the first node in the list */
node->parent->child = node->next;
if (node->next)
node->next->prev = node->prev;
node->parent = NULL;
node->prev = NULL;
node->next = NULL;
}
static void reset_cache(struct exfat* ef, struct exfat_node* node)
{
char buffer[UTF8_BYTES(EXFAT_NAME_MAX) + 1];
while (node->child)
{
struct exfat_node* p = node->child;
reset_cache(ef, p);
tree_detach(p);
free(p);
}
node->flags &= ~EXFAT_ATTRIB_CACHED;
if (node->references != 0)
{
exfat_get_name(node, buffer, sizeof(buffer) - 1);
exfat_warn("non-zero reference counter (%d) for '%s'",
node->references, buffer);
}
if (node != ef->root && (node->flags & EXFAT_ATTRIB_DIRTY))
{
exfat_get_name(node, buffer, sizeof(buffer) - 1);
exfat_bug("node '%s' is dirty", buffer);
}
while (node->references)
exfat_put_node(ef, node);
}
void exfat_reset_cache(struct exfat* ef)
{
reset_cache(ef, ef->root);
}
static bool next_entry(struct exfat* ef, const struct exfat_node* parent,
cluster_t* cluster, off_t* offset)
{
*offset += sizeof(struct exfat_entry);
if (*offset % CLUSTER_SIZE(*ef->sb) == 0)
{
*cluster = exfat_next_cluster(ef, parent, *cluster);
if (CLUSTER_INVALID(*cluster))
{
exfat_error("invalid cluster %#x while getting next entry",
*cluster);
return false;
}
}
return true;
}
int exfat_flush_node(struct exfat* ef, struct exfat_node* node)
{
cluster_t cluster;
off_t offset;
off_t meta1_offset, meta2_offset;
struct exfat_entry_meta1 meta1;
struct exfat_entry_meta2 meta2;
if (!(node->flags & EXFAT_ATTRIB_DIRTY))
return 0; /* no need to flush */
if (ef->ro)
exfat_bug("unable to flush node to read-only FS");
if (node->parent == NULL)
return 0; /* do not flush unlinked node */
cluster = node->entry_cluster;
offset = node->entry_offset;
meta1_offset = co2o(ef, cluster, offset);
if (!next_entry(ef, node->parent, &cluster, &offset))
return -EIO;
meta2_offset = co2o(ef, cluster, offset);
if (exfat_pread(ef->dev, &meta1, sizeof(meta1), meta1_offset) < 0)
{
exfat_error("failed to read meta1 entry on flush");
return -EIO;
}
if (meta1.type != EXFAT_ENTRY_FILE)
exfat_bug("invalid type of meta1: 0x%hhx", meta1.type);
meta1.attrib = cpu_to_le16(node->flags);
exfat_unix2exfat(node->mtime, &meta1.mdate, &meta1.mtime, &meta1.mtime_cs);
exfat_unix2exfat(node->atime, &meta1.adate, &meta1.atime, NULL);
if (exfat_pread(ef->dev, &meta2, sizeof(meta2), meta2_offset) < 0)
{
exfat_error("failed to read meta2 entry on flush");
return -EIO;
}
if (meta2.type != EXFAT_ENTRY_FILE_INFO)
exfat_bug("invalid type of meta2: 0x%hhx", meta2.type);
meta2.size = meta2.valid_size = cpu_to_le64(node->size);
meta2.start_cluster = cpu_to_le32(node->start_cluster);
meta2.flags = EXFAT_FLAG_ALWAYS1;
/* empty files must not be marked as contiguous */
if (node->size != 0 && IS_CONTIGUOUS(*node))
meta2.flags |= EXFAT_FLAG_CONTIGUOUS;
/* name hash remains unchanged, no need to recalculate it */
meta1.checksum = exfat_calc_checksum(&meta1, &meta2, node->name);
if (exfat_pwrite(ef->dev, &meta1, sizeof(meta1), meta1_offset) < 0)
{
exfat_error("failed to write meta1 entry on flush");
return -EIO;
}
if (exfat_pwrite(ef->dev, &meta2, sizeof(meta2), meta2_offset) < 0)
{
exfat_error("failed to write meta2 entry on flush");
return -EIO;
}
node->flags &= ~EXFAT_ATTRIB_DIRTY;
return exfat_flush(ef);
}
static bool erase_entry(struct exfat* ef, struct exfat_node* node)
{
cluster_t cluster = node->entry_cluster;
off_t offset = node->entry_offset;
int name_entries = DIV_ROUND_UP(utf16_length(node->name), EXFAT_ENAME_MAX);
uint8_t entry_type;
entry_type = EXFAT_ENTRY_FILE & ~EXFAT_ENTRY_VALID;
if (exfat_pwrite(ef->dev, &entry_type, 1, co2o(ef, cluster, offset)) < 0)
{
exfat_error("failed to erase meta1 entry");
return false;
}
if (!next_entry(ef, node->parent, &cluster, &offset))
return false;
entry_type = EXFAT_ENTRY_FILE_INFO & ~EXFAT_ENTRY_VALID;
if (exfat_pwrite(ef->dev, &entry_type, 1, co2o(ef, cluster, offset)) < 0)
{
exfat_error("failed to erase meta2 entry");
return false;
}
while (name_entries--)
{
if (!next_entry(ef, node->parent, &cluster, &offset))
return false;
entry_type = EXFAT_ENTRY_FILE_NAME & ~EXFAT_ENTRY_VALID;
if (exfat_pwrite(ef->dev, &entry_type, 1,
co2o(ef, cluster, offset)) < 0)
{
exfat_error("failed to erase name entry");
return false;
}
}
return true;
}
static int shrink_directory(struct exfat* ef, struct exfat_node* dir,
off_t deleted_offset)
{
const struct exfat_node* node;
const struct exfat_node* last_node;
uint64_t entries = 0;
uint64_t new_size;
if (!(dir->flags & EXFAT_ATTRIB_DIR))
exfat_bug("attempted to shrink a file");
if (!(dir->flags & EXFAT_ATTRIB_CACHED))
exfat_bug("attempted to shrink uncached directory");
for (last_node = node = dir->child; node; node = node->next)
{
if (deleted_offset < node->entry_offset)
{
/* there are other entries after the removed one, no way to shrink
this directory */
return 0;
}
if (last_node->entry_offset < node->entry_offset)
last_node = node;
}
if (last_node)
{
/* offset of the last entry */
entries += last_node->entry_offset / sizeof(struct exfat_entry);
/* two subentries with meta info */
entries += 2;
/* subentries with file name */
entries += DIV_ROUND_UP(utf16_length(last_node->name),
EXFAT_ENAME_MAX);
}
new_size = DIV_ROUND_UP(entries * sizeof(struct exfat_entry),
CLUSTER_SIZE(*ef->sb)) * CLUSTER_SIZE(*ef->sb);
if (new_size == 0) /* directory always has at least 1 cluster */
new_size = CLUSTER_SIZE(*ef->sb);
if (new_size == dir->size)
return 0;
return exfat_truncate(ef, dir, new_size, true);
}
static int delete(struct exfat* ef, struct exfat_node* node)
{
struct exfat_node* parent = node->parent;
off_t deleted_offset = node->entry_offset;
int rc;
exfat_get_node(parent);
if (!erase_entry(ef, node))
{
exfat_put_node(ef, parent);
return -EIO;
}
exfat_update_mtime(parent);
tree_detach(node);
rc = shrink_directory(ef, parent, deleted_offset);
node->flags |= EXFAT_ATTRIB_UNLINKED;
if (rc != 0)
{
exfat_flush_node(ef, parent);
exfat_put_node(ef, parent);
return rc;
}
rc = exfat_flush_node(ef, parent);
exfat_put_node(ef, parent);
return rc;
}
int exfat_unlink(struct exfat* ef, struct exfat_node* node)
{
if (node->flags & EXFAT_ATTRIB_DIR)
return -EISDIR;
return delete(ef, node);
}
int exfat_rmdir(struct exfat* ef, struct exfat_node* node)
{
int rc;
if (!(node->flags & EXFAT_ATTRIB_DIR))
return -ENOTDIR;
/* check that directory is empty */
rc = exfat_cache_directory(ef, node);
if (rc != 0)
return rc;
if (node->child)
return -ENOTEMPTY;
return delete(ef, node);
}
static int grow_directory(struct exfat* ef, struct exfat_node* dir,
uint64_t asize, uint32_t difference)
{
return exfat_truncate(ef, dir,
DIV_ROUND_UP(asize + difference, CLUSTER_SIZE(*ef->sb))
* CLUSTER_SIZE(*ef->sb), true);
}
static int find_slot(struct exfat* ef, struct exfat_node* dir,
cluster_t* cluster, off_t* offset, int subentries)
{
struct iterator it;
int rc;
const struct exfat_entry* entry;
int contiguous = 0;
rc = opendir(ef, dir, &it);
if (rc != 0)
return rc;
for (;;)
{
if (contiguous == 0)
{
*cluster = it.cluster;
*offset = it.offset;
}
entry = get_entry_ptr(ef, &it);
if (entry->type & EXFAT_ENTRY_VALID)
contiguous = 0;
else
contiguous++;
if (contiguous == subentries)
break; /* suitable slot is found */
if (it.offset + sizeof(struct exfat_entry) >= dir->size)
{
rc = grow_directory(ef, dir, dir->size,
(subentries - contiguous) * sizeof(struct exfat_entry));
if (rc != 0)
{
closedir(&it);
return rc;
}
}
if (!fetch_next_entry(ef, dir, &it))
{
closedir(&it);
return -EIO;
}
}
closedir(&it);
return 0;
}
static int write_entry(struct exfat* ef, struct exfat_node* dir,
const le16_t* name, cluster_t cluster, off_t offset, uint16_t attrib)
{
struct exfat_node* node;
struct exfat_entry_meta1 meta1;
struct exfat_entry_meta2 meta2;
const size_t name_length = utf16_length(name);
const int name_entries = DIV_ROUND_UP(name_length, EXFAT_ENAME_MAX);
int i;
node = allocate_node();
if (node == NULL)
return -ENOMEM;
node->entry_cluster = cluster;
node->entry_offset = offset;
memcpy(node->name, name, name_length * sizeof(le16_t));
memset(&meta1, 0, sizeof(meta1));
meta1.type = EXFAT_ENTRY_FILE;
meta1.continuations = 1 + name_entries;
meta1.attrib = cpu_to_le16(attrib);
exfat_unix2exfat(time(NULL), &meta1.crdate, &meta1.crtime,
&meta1.crtime_cs);
meta1.adate = meta1.mdate = meta1.crdate;
meta1.atime = meta1.mtime = meta1.crtime;
meta1.mtime_cs = meta1.crtime_cs; /* there is no atime_cs */
memset(&meta2, 0, sizeof(meta2));
meta2.type = EXFAT_ENTRY_FILE_INFO;
meta2.flags = EXFAT_FLAG_ALWAYS1;
meta2.name_length = name_length;
meta2.name_hash = exfat_calc_name_hash(ef, node->name);
meta2.start_cluster = cpu_to_le32(EXFAT_CLUSTER_FREE);
meta1.checksum = exfat_calc_checksum(&meta1, &meta2, node->name);
if (exfat_pwrite(ef->dev, &meta1, sizeof(meta1),
co2o(ef, cluster, offset)) < 0)
{
exfat_error("failed to write meta1 entry");
return -EIO;
}
if (!next_entry(ef, dir, &cluster, &offset))
return -EIO;
if (exfat_pwrite(ef->dev, &meta2, sizeof(meta2),
co2o(ef, cluster, offset)) < 0)
{
exfat_error("failed to write meta2 entry");
return -EIO;
}
for (i = 0; i < name_entries; i++)
{
struct exfat_entry_name name_entry = {EXFAT_ENTRY_FILE_NAME, 0};
memcpy(name_entry.name, node->name + i * EXFAT_ENAME_MAX,
MIN(EXFAT_ENAME_MAX, EXFAT_NAME_MAX - i * EXFAT_ENAME_MAX) *
sizeof(le16_t));
if (!next_entry(ef, dir, &cluster, &offset))
return -EIO;
if (exfat_pwrite(ef->dev, &name_entry, sizeof(name_entry),
co2o(ef, cluster, offset)) < 0)
{
exfat_error("failed to write name entry");
return -EIO;
}
}
init_node_meta1(node, &meta1);
init_node_meta2(node, &meta2);
tree_attach(dir, node);
exfat_update_mtime(dir);
return 0;
}
static int create(struct exfat* ef, const char* path, uint16_t attrib)
{
struct exfat_node* dir;
struct exfat_node* existing;
cluster_t cluster = EXFAT_CLUSTER_BAD;
off_t offset = -1;
le16_t name[EXFAT_NAME_MAX + 1];
int rc;
rc = exfat_split(ef, &dir, &existing, name, path);
if (rc != 0)
return rc;
if (existing != NULL)
{
exfat_put_node(ef, existing);
exfat_put_node(ef, dir);
return -EEXIST;
}
rc = find_slot(ef, dir, &cluster, &offset,
2 + DIV_ROUND_UP(utf16_length(name), EXFAT_ENAME_MAX));
if (rc != 0)
{
exfat_put_node(ef, dir);
return rc;
}
rc = write_entry(ef, dir, name, cluster, offset, attrib);
if (rc != 0)
{
exfat_put_node(ef, dir);
return rc;
}
rc = exfat_flush_node(ef, dir);
exfat_put_node(ef, dir);
return rc;
}
int exfat_mknod(struct exfat* ef, const char* path)
{
return create(ef, path, EXFAT_ATTRIB_ARCH);
}
int exfat_mkdir(struct exfat* ef, const char* path)
{
int rc;
struct exfat_node* node;
rc = create(ef, path, EXFAT_ATTRIB_DIR);
if (rc != 0)
return rc;
rc = exfat_lookup(ef, &node, path);
if (rc != 0)
return 0;
/* directories always have at least one cluster */
rc = exfat_truncate(ef, node, CLUSTER_SIZE(*ef->sb), true);
if (rc != 0)
{
delete(ef, node);
exfat_put_node(ef, node);
return rc;
}
rc = exfat_flush_node(ef, node);
if (rc != 0)
{
delete(ef, node);
exfat_put_node(ef, node);
return rc;
}
exfat_put_node(ef, node);
return 0;
}
static int rename_entry(struct exfat* ef, struct exfat_node* dir,
struct exfat_node* node, const le16_t* name, cluster_t new_cluster,
off_t new_offset)
{
struct exfat_entry_meta1 meta1;
struct exfat_entry_meta2 meta2;
cluster_t old_cluster = node->entry_cluster;
off_t old_offset = node->entry_offset;
const size_t name_length = utf16_length(name);
const int name_entries = DIV_ROUND_UP(name_length, EXFAT_ENAME_MAX);
int i;
if (exfat_pread(ef->dev, &meta1, sizeof(meta1),
co2o(ef, old_cluster, old_offset)) < 0)
{
exfat_error("failed to read meta1 entry on rename");
return -EIO;
}
if (!next_entry(ef, node->parent, &old_cluster, &old_offset))
return -EIO;
if (exfat_pread(ef->dev, &meta2, sizeof(meta2),
co2o(ef, old_cluster, old_offset)) < 0)
{
exfat_error("failed to read meta2 entry on rename");
return -EIO;
}
meta1.continuations = 1 + name_entries;
meta2.name_hash = exfat_calc_name_hash(ef, name);
meta2.name_length = name_length;
meta1.checksum = exfat_calc_checksum(&meta1, &meta2, name);
if (!erase_entry(ef, node))
return -EIO;
node->entry_cluster = new_cluster;
node->entry_offset = new_offset;
if (exfat_pwrite(ef->dev, &meta1, sizeof(meta1),
co2o(ef, new_cluster, new_offset)) < 0)
{
exfat_error("failed to write meta1 entry on rename");
return -EIO;
}
if (!next_entry(ef, dir, &new_cluster, &new_offset))
return -EIO;
if (exfat_pwrite(ef->dev, &meta2, sizeof(meta2),
co2o(ef, new_cluster, new_offset)) < 0)
{
exfat_error("failed to write meta2 entry on rename");
return -EIO;
}
for (i = 0; i < name_entries; i++)
{
struct exfat_entry_name name_entry = {EXFAT_ENTRY_FILE_NAME, 0};
memcpy(name_entry.name, name + i * EXFAT_ENAME_MAX,
EXFAT_ENAME_MAX * sizeof(le16_t));
if (!next_entry(ef, dir, &new_cluster, &new_offset))
return -EIO;
if (exfat_pwrite(ef->dev, &name_entry, sizeof(name_entry),
co2o(ef, new_cluster, new_offset)) < 0)
{
exfat_error("failed to write name entry on rename");
return -EIO;
}
}
memcpy(node->name, name, (EXFAT_NAME_MAX + 1) * sizeof(le16_t));
tree_detach(node);
tree_attach(dir, node);
return 0;
}
int exfat_rename(struct exfat* ef, const char* old_path, const char* new_path)
{
struct exfat_node* node;
struct exfat_node* existing;
struct exfat_node* dir;
cluster_t cluster = EXFAT_CLUSTER_BAD;
off_t offset = -1;
le16_t name[EXFAT_NAME_MAX + 1];
int rc;
rc = exfat_lookup(ef, &node, old_path);
if (rc != 0)
return rc;
rc = exfat_split(ef, &dir, &existing, name, new_path);
if (rc != 0)
{
exfat_put_node(ef, node);
return rc;
}
/* check that target is not a subdirectory of the source */
if (node->flags & EXFAT_ATTRIB_DIR)
{
struct exfat_node* p;
for (p = dir; p; p = p->parent)
if (node == p)
{
if (existing != NULL)
exfat_put_node(ef, existing);
exfat_put_node(ef, dir);
exfat_put_node(ef, node);
return -EINVAL;
}
}
if (existing != NULL)
{
/* remove target if it's not the same node as source */
if (existing != node)
{
if (existing->flags & EXFAT_ATTRIB_DIR)
{
if (node->flags & EXFAT_ATTRIB_DIR)
rc = exfat_rmdir(ef, existing);
else
rc = -ENOTDIR;
}
else
{
if (!(node->flags & EXFAT_ATTRIB_DIR))
rc = exfat_unlink(ef, existing);
else
rc = -EISDIR;
}
exfat_put_node(ef, existing);
if (rc != 0)
{
/* free clusters even if something went wrong; overwise they
will be just lost */
exfat_cleanup_node(ef, existing);
exfat_put_node(ef, dir);
exfat_put_node(ef, node);
return rc;
}
rc = exfat_cleanup_node(ef, existing);
if (rc != 0)
{
exfat_put_node(ef, dir);
exfat_put_node(ef, node);
return rc;
}
}
else
exfat_put_node(ef, existing);
}
rc = find_slot(ef, dir, &cluster, &offset,
2 + DIV_ROUND_UP(utf16_length(name), EXFAT_ENAME_MAX));
if (rc != 0)
{
exfat_put_node(ef, dir);
exfat_put_node(ef, node);
return rc;
}
rc = rename_entry(ef, dir, node, name, cluster, offset);
exfat_put_node(ef, dir);
exfat_put_node(ef, node);
return rc;
}
void exfat_utimes(struct exfat_node* node, const struct timespec tv[2])
{
node->atime = tv[0].tv_sec;
node->mtime = tv[1].tv_sec;
node->flags |= EXFAT_ATTRIB_DIRTY;
}
void exfat_update_atime(struct exfat_node* node)
{
node->atime = time(NULL);
node->flags |= EXFAT_ATTRIB_DIRTY;
}
void exfat_update_mtime(struct exfat_node* node)
{
node->mtime = time(NULL);
node->flags |= EXFAT_ATTRIB_DIRTY;
}
const char* exfat_get_label(struct exfat* ef)
{
return ef->label;
}
static int find_label(struct exfat* ef, cluster_t* cluster, off_t* offset)
{
struct iterator it;
int rc;
rc = opendir(ef, ef->root, &it);
if (rc != 0)
return rc;
for (;;)
{
if (it.offset >= ef->root->size)
{
closedir(&it);
return -ENOENT;
}
if (get_entry_ptr(ef, &it)->type == EXFAT_ENTRY_LABEL)
{
*cluster = it.cluster;
*offset = it.offset;
closedir(&it);
return 0;
}
if (!fetch_next_entry(ef, ef->root, &it))
{
closedir(&it);
return -EIO;
}
}
}
int exfat_set_label(struct exfat* ef, const char* label)
{
le16_t label_utf16[EXFAT_ENAME_MAX + 1];
int rc;
cluster_t cluster;
off_t offset;
struct exfat_entry_label entry;
memset(label_utf16, 0, sizeof(label_utf16));
rc = utf8_to_utf16(label_utf16, label, EXFAT_ENAME_MAX, strlen(label));
if (rc != 0)
return rc;
rc = find_label(ef, &cluster, &offset);
if (rc == -ENOENT)
rc = find_slot(ef, ef->root, &cluster, &offset, 1);
if (rc != 0)
return rc;
entry.type = EXFAT_ENTRY_LABEL;
entry.length = utf16_length(label_utf16);
memcpy(entry.name, label_utf16, sizeof(entry.name));
if (entry.length == 0)
entry.type ^= EXFAT_ENTRY_VALID;
if (exfat_pwrite(ef->dev, &entry, sizeof(struct exfat_entry_label),
co2o(ef, cluster, offset)) < 0)
{
exfat_error("failed to write label entry");
return -EIO;
}
strcpy(ef->label, label);
return 0;
}
fuse-exfat-1.2.3/libexfat/exfatfs.h 0000664 0001750 0001750 00000013131 12622136464 014123 0000000 0000000 /*
exfatfs.h (29.08.09)
Definitions of structures and constants used in exFAT file system.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef EXFATFS_H_INCLUDED
#define EXFATFS_H_INCLUDED
#include "byteorder.h"
#include "compiler.h"
typedef uint32_t cluster_t; /* cluster number */
#define EXFAT_FIRST_DATA_CLUSTER 2
#define EXFAT_LAST_DATA_CLUSTER 0xfffffff6
#define EXFAT_CLUSTER_FREE 0 /* free cluster */
#define EXFAT_CLUSTER_BAD 0xfffffff7 /* cluster contains bad sector */
#define EXFAT_CLUSTER_END 0xffffffff /* final cluster of file or directory */
#define EXFAT_STATE_MOUNTED 2
struct exfat_super_block
{
uint8_t jump[3]; /* 0x00 jmp and nop instructions */
uint8_t oem_name[8]; /* 0x03 "EXFAT " */
uint8_t __unused1[53]; /* 0x0B always 0 */
le64_t sector_start; /* 0x40 partition first sector */
le64_t sector_count; /* 0x48 partition sectors count */
le32_t fat_sector_start; /* 0x50 FAT first sector */
le32_t fat_sector_count; /* 0x54 FAT sectors count */
le32_t cluster_sector_start; /* 0x58 first cluster sector */
le32_t cluster_count; /* 0x5C total clusters count */
le32_t rootdir_cluster; /* 0x60 first cluster of the root dir */
le32_t volume_serial; /* 0x64 volume serial number */
struct /* 0x68 FS version */
{
uint8_t minor;
uint8_t major;
}
version;
le16_t volume_state; /* 0x6A volume state flags */
uint8_t sector_bits; /* 0x6C sector size as (1 << n) */
uint8_t spc_bits; /* 0x6D sectors per cluster as (1 << n) */
uint8_t fat_count; /* 0x6E always 1 */
uint8_t drive_no; /* 0x6F always 0x80 */
uint8_t allocated_percent; /* 0x70 percentage of allocated space */
uint8_t __unused2[397]; /* 0x71 always 0 */
le16_t boot_signature; /* the value of 0xAA55 */
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_super_block) == 512);
#define EXFAT_ENTRY_VALID 0x80
#define EXFAT_ENTRY_CONTINUED 0x40
#define EXFAT_ENTRY_OPTIONAL 0x20
#define EXFAT_ENTRY_BITMAP (0x01 | EXFAT_ENTRY_VALID)
#define EXFAT_ENTRY_UPCASE (0x02 | EXFAT_ENTRY_VALID)
#define EXFAT_ENTRY_LABEL (0x03 | EXFAT_ENTRY_VALID)
#define EXFAT_ENTRY_FILE (0x05 | EXFAT_ENTRY_VALID)
#define EXFAT_ENTRY_FILE_INFO (0x00 | EXFAT_ENTRY_VALID | EXFAT_ENTRY_CONTINUED)
#define EXFAT_ENTRY_FILE_NAME (0x01 | EXFAT_ENTRY_VALID | EXFAT_ENTRY_CONTINUED)
struct exfat_entry /* common container for all entries */
{
uint8_t type; /* any of EXFAT_ENTRY_xxx */
uint8_t data[31];
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_entry) == 32);
#define EXFAT_ENAME_MAX 15
struct exfat_entry_bitmap /* allocated clusters bitmap */
{
uint8_t type; /* EXFAT_ENTRY_BITMAP */
uint8_t __unknown1[19];
le32_t start_cluster;
le64_t size; /* in bytes */
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_entry_bitmap) == 32);
struct exfat_entry_upcase /* upper case translation table */
{
uint8_t type; /* EXFAT_ENTRY_UPCASE */
uint8_t __unknown1[3];
le32_t checksum;
uint8_t __unknown2[12];
le32_t start_cluster;
le64_t size; /* in bytes */
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_entry_upcase) == 32);
struct exfat_entry_label /* volume label */
{
uint8_t type; /* EXFAT_ENTRY_LABEL */
uint8_t length; /* number of characters */
le16_t name[EXFAT_ENAME_MAX]; /* in UTF-16LE */
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_entry_label) == 32);
#define EXFAT_ATTRIB_RO 0x01
#define EXFAT_ATTRIB_HIDDEN 0x02
#define EXFAT_ATTRIB_SYSTEM 0x04
#define EXFAT_ATTRIB_VOLUME 0x08
#define EXFAT_ATTRIB_DIR 0x10
#define EXFAT_ATTRIB_ARCH 0x20
struct exfat_entry_meta1 /* file or directory info (part 1) */
{
uint8_t type; /* EXFAT_ENTRY_FILE */
uint8_t continuations;
le16_t checksum;
le16_t attrib; /* combination of EXFAT_ATTRIB_xxx */
le16_t __unknown1;
le16_t crtime, crdate; /* creation date and time */
le16_t mtime, mdate; /* latest modification date and time */
le16_t atime, adate; /* latest access date and time */
uint8_t crtime_cs; /* creation time in cs (centiseconds) */
uint8_t mtime_cs; /* latest modification time in cs */
uint8_t __unknown2[10];
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_entry_meta1) == 32);
#define EXFAT_FLAG_ALWAYS1 (1u << 0)
#define EXFAT_FLAG_CONTIGUOUS (1u << 1)
struct exfat_entry_meta2 /* file or directory info (part 2) */
{
uint8_t type; /* EXFAT_ENTRY_FILE_INFO */
uint8_t flags; /* combination of EXFAT_FLAG_xxx */
uint8_t __unknown1;
uint8_t name_length;
le16_t name_hash;
le16_t __unknown2;
le64_t valid_size; /* in bytes, less or equal to size */
uint8_t __unknown3[4];
le32_t start_cluster;
le64_t size; /* in bytes */
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_entry_meta2) == 32);
struct exfat_entry_name /* file or directory name */
{
uint8_t type; /* EXFAT_ENTRY_FILE_NAME */
uint8_t __unknown;
le16_t name[EXFAT_ENAME_MAX]; /* in UTF-16LE */
}
PACKED;
STATIC_ASSERT(sizeof(struct exfat_entry_name) == 32);
#endif /* ifndef EXFATFS_H_INCLUDED */
fuse-exfat-1.2.3/libexfat/Makefile.am 0000664 0001750 0001750 00000002017 12622136464 014347 0000000 0000000 #
# Makefile.am (30.03.15)
# Automake source.
#
# Free exFAT implementation.
# Copyright (C) 2010-2015 Andrew Nayenko
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
noinst_LIBRARIES = libexfat.a
libexfat_a_SOURCES = \
byteorder.h \
cluster.c \
compiler.h \
exfat.h \
exfatfs.h \
io.c \
log.c \
lookup.c \
mount.c \
node.c \
platform.h \
time.c \
utf.c \
utils.c
fuse-exfat-1.2.3/libexfat/utf.c 0000664 0001750 0001750 00000012717 12567304245 013267 0000000 0000000 /*
utf.c (13.09.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
static char* wchar_to_utf8(char* output, wchar_t wc, size_t outsize)
{
if (wc <= 0x7f)
{
if (outsize < 1)
return NULL;
*output++ = (char) wc;
}
else if (wc <= 0x7ff)
{
if (outsize < 2)
return NULL;
*output++ = 0xc0 | (wc >> 6);
*output++ = 0x80 | (wc & 0x3f);
}
else if (wc <= 0xffff)
{
if (outsize < 3)
return NULL;
*output++ = 0xe0 | (wc >> 12);
*output++ = 0x80 | ((wc >> 6) & 0x3f);
*output++ = 0x80 | (wc & 0x3f);
}
else if (wc <= 0x1fffff)
{
if (outsize < 4)
return NULL;
*output++ = 0xf0 | (wc >> 18);
*output++ = 0x80 | ((wc >> 12) & 0x3f);
*output++ = 0x80 | ((wc >> 6) & 0x3f);
*output++ = 0x80 | (wc & 0x3f);
}
else if (wc <= 0x3ffffff)
{
if (outsize < 5)
return NULL;
*output++ = 0xf8 | (wc >> 24);
*output++ = 0x80 | ((wc >> 18) & 0x3f);
*output++ = 0x80 | ((wc >> 12) & 0x3f);
*output++ = 0x80 | ((wc >> 6) & 0x3f);
*output++ = 0x80 | (wc & 0x3f);
}
else if (wc <= 0x7fffffff)
{
if (outsize < 6)
return NULL;
*output++ = 0xfc | (wc >> 30);
*output++ = 0x80 | ((wc >> 24) & 0x3f);
*output++ = 0x80 | ((wc >> 18) & 0x3f);
*output++ = 0x80 | ((wc >> 12) & 0x3f);
*output++ = 0x80 | ((wc >> 6) & 0x3f);
*output++ = 0x80 | (wc & 0x3f);
}
else
return NULL;
return output;
}
static const le16_t* utf16_to_wchar(const le16_t* input, wchar_t* wc,
size_t insize)
{
if ((le16_to_cpu(input[0]) & 0xfc00) == 0xd800)
{
if (insize < 2 || (le16_to_cpu(input[1]) & 0xfc00) != 0xdc00)
return NULL;
*wc = ((wchar_t) (le16_to_cpu(input[0]) & 0x3ff) << 10);
*wc |= (le16_to_cpu(input[1]) & 0x3ff);
*wc += 0x10000;
return input + 2;
}
else
{
*wc = le16_to_cpu(*input);
return input + 1;
}
}
int utf16_to_utf8(char* output, const le16_t* input, size_t outsize,
size_t insize)
{
const le16_t* inp = input;
char* outp = output;
wchar_t wc;
while (inp - input < insize && le16_to_cpu(*inp))
{
inp = utf16_to_wchar(inp, &wc, insize - (inp - input));
if (inp == NULL)
{
exfat_error("illegal UTF-16 sequence");
return -EILSEQ;
}
outp = wchar_to_utf8(outp, wc, outsize - (outp - output));
if (outp == NULL)
{
exfat_error("name is too long");
return -ENAMETOOLONG;
}
}
*outp = '\0';
return 0;
}
static const char* utf8_to_wchar(const char* input, wchar_t* wc,
size_t insize)
{
if ((input[0] & 0x80) == 0 && insize >= 1)
{
*wc = (wchar_t) input[0];
return input + 1;
}
if ((input[0] & 0xe0) == 0xc0 && insize >= 2)
{
*wc = (((wchar_t) input[0] & 0x1f) << 6) |
((wchar_t) input[1] & 0x3f);
return input + 2;
}
if ((input[0] & 0xf0) == 0xe0 && insize >= 3)
{
*wc = (((wchar_t) input[0] & 0x0f) << 12) |
(((wchar_t) input[1] & 0x3f) << 6) |
((wchar_t) input[2] & 0x3f);
return input + 3;
}
if ((input[0] & 0xf8) == 0xf0 && insize >= 4)
{
*wc = (((wchar_t) input[0] & 0x07) << 18) |
(((wchar_t) input[1] & 0x3f) << 12) |
(((wchar_t) input[2] & 0x3f) << 6) |
((wchar_t) input[3] & 0x3f);
return input + 4;
}
if ((input[0] & 0xfc) == 0xf8 && insize >= 5)
{
*wc = (((wchar_t) input[0] & 0x03) << 24) |
(((wchar_t) input[1] & 0x3f) << 18) |
(((wchar_t) input[2] & 0x3f) << 12) |
(((wchar_t) input[3] & 0x3f) << 6) |
((wchar_t) input[4] & 0x3f);
return input + 5;
}
if ((input[0] & 0xfe) == 0xfc && insize >= 6)
{
*wc = (((wchar_t) input[0] & 0x01) << 30) |
(((wchar_t) input[1] & 0x3f) << 24) |
(((wchar_t) input[2] & 0x3f) << 18) |
(((wchar_t) input[3] & 0x3f) << 12) |
(((wchar_t) input[4] & 0x3f) << 6) |
((wchar_t) input[5] & 0x3f);
return input + 6;
}
return NULL;
}
static le16_t* wchar_to_utf16(le16_t* output, wchar_t wc, size_t outsize)
{
if (wc <= 0xffff) /* if character is from BMP */
{
if (outsize == 0)
return NULL;
output[0] = cpu_to_le16(wc);
return output + 1;
}
if (outsize < 2)
return NULL;
wc -= 0x10000;
output[0] = cpu_to_le16(0xd800 | ((wc >> 10) & 0x3ff));
output[1] = cpu_to_le16(0xdc00 | (wc & 0x3ff));
return output + 2;
}
int utf8_to_utf16(le16_t* output, const char* input, size_t outsize,
size_t insize)
{
const char* inp = input;
le16_t* outp = output;
wchar_t wc;
while (inp - input < insize && *inp)
{
inp = utf8_to_wchar(inp, &wc, insize - (inp - input));
if (inp == NULL)
{
exfat_error("illegal UTF-8 sequence");
return -EILSEQ;
}
outp = wchar_to_utf16(outp, wc, outsize - (outp - output));
if (outp == NULL)
{
exfat_error("name is too long");
return -ENAMETOOLONG;
}
}
*outp = cpu_to_le16(0);
return 0;
}
size_t utf16_length(const le16_t* str)
{
size_t i = 0;
while (le16_to_cpu(str[i]))
i++;
return i;
}
fuse-exfat-1.2.3/libexfat/time.c 0000664 0001750 0001750 00000011523 12567304245 013421 0000000 0000000 /*
time.c (03.02.12)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
/* timezone offset from UTC in seconds; positive for western timezones,
negative for eastern ones */
static long exfat_timezone;
#define SEC_IN_MIN 60ll
#define SEC_IN_HOUR (60 * SEC_IN_MIN)
#define SEC_IN_DAY (24 * SEC_IN_HOUR)
#define SEC_IN_YEAR (365 * SEC_IN_DAY) /* not leap year */
/* Unix epoch started at 0:00:00 UTC 1 January 1970 */
#define UNIX_EPOCH_YEAR 1970
/* exFAT epoch started at 0:00:00 UTC 1 January 1980 */
#define EXFAT_EPOCH_YEAR 1980
/* number of years from Unix epoch to exFAT epoch */
#define EPOCH_DIFF_YEAR (EXFAT_EPOCH_YEAR - UNIX_EPOCH_YEAR)
/* number of days from Unix epoch to exFAT epoch (considering leap days) */
#define EPOCH_DIFF_DAYS (EPOCH_DIFF_YEAR * 365 + EPOCH_DIFF_YEAR / 4)
/* number of seconds from Unix epoch to exFAT epoch (considering leap days) */
#define EPOCH_DIFF_SEC (EPOCH_DIFF_DAYS * SEC_IN_DAY)
/* number of leap years passed from exFAT epoch to the specified year
(excluding the specified year itself) */
#define LEAP_YEARS(year) ((EXFAT_EPOCH_YEAR + (year) - 1) / 4 \
- (EXFAT_EPOCH_YEAR - 1) / 4)
/* checks whether the specified year is leap */
#define IS_LEAP_YEAR(year) ((EXFAT_EPOCH_YEAR + (year)) % 4 == 0)
static const time_t days_in_year[] =
{
/* Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec */
0, 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334
};
time_t exfat_exfat2unix(le16_t date, le16_t time, uint8_t centisec)
{
time_t unix_time = EPOCH_DIFF_SEC;
uint16_t ndate = le16_to_cpu(date);
uint16_t ntime = le16_to_cpu(time);
uint16_t day = ndate & 0x1f; /* 5 bits, 1-31 */
uint16_t month = ndate >> 5 & 0xf; /* 4 bits, 1-12 */
uint16_t year = ndate >> 9; /* 7 bits, 1-127 (+1980) */
uint16_t twosec = ntime & 0x1f; /* 5 bits, 0-29 (2 sec granularity) */
uint16_t min = ntime >> 5 & 0x3f; /* 6 bits, 0-59 */
uint16_t hour = ntime >> 11; /* 5 bits, 0-23 */
if (day == 0 || month == 0 || month > 12)
{
exfat_error("bad date %u-%02hu-%02hu",
year + EXFAT_EPOCH_YEAR, month, day);
return 0;
}
if (hour > 23 || min > 59 || twosec > 29)
{
exfat_error("bad time %hu:%02hu:%02u",
hour, min, twosec * 2);
return 0;
}
if (centisec > 199)
{
exfat_error("bad centiseconds count %hhu", centisec);
return 0;
}
/* every 4th year between 1904 and 2096 is leap */
unix_time += year * SEC_IN_YEAR + LEAP_YEARS(year) * SEC_IN_DAY;
unix_time += days_in_year[month] * SEC_IN_DAY;
/* if it's leap year and February has passed we should add 1 day */
if ((EXFAT_EPOCH_YEAR + year) % 4 == 0 && month > 2)
unix_time += SEC_IN_DAY;
unix_time += (day - 1) * SEC_IN_DAY;
unix_time += hour * SEC_IN_HOUR;
unix_time += min * SEC_IN_MIN;
/* exFAT represents time with 2 sec granularity */
unix_time += twosec * 2;
unix_time += centisec / 100;
/* exFAT stores timestamps in local time, so we correct it to UTC */
unix_time += exfat_timezone;
return unix_time;
}
void exfat_unix2exfat(time_t unix_time, le16_t* date, le16_t* time,
uint8_t* centisec)
{
time_t shift = EPOCH_DIFF_SEC + exfat_timezone;
uint16_t day, month, year;
uint16_t twosec, min, hour;
int days;
int i;
/* time before exFAT epoch cannot be represented */
if (unix_time < shift)
unix_time = shift;
unix_time -= shift;
days = unix_time / SEC_IN_DAY;
year = (4 * days) / (4 * 365 + 1);
days -= year * 365 + LEAP_YEARS(year);
month = 0;
for (i = 1; i <= 12; i++)
{
int leap_day = (IS_LEAP_YEAR(year) && i == 2);
int leap_sub = (IS_LEAP_YEAR(year) && i >= 3);
if (i == 12 || days - leap_sub < days_in_year[i + 1] + leap_day)
{
month = i;
days -= days_in_year[i] + leap_sub;
break;
}
}
day = days + 1;
hour = (unix_time % SEC_IN_DAY) / SEC_IN_HOUR;
min = (unix_time % SEC_IN_HOUR) / SEC_IN_MIN;
twosec = (unix_time % SEC_IN_MIN) / 2;
*date = cpu_to_le16(day | (month << 5) | (year << 9));
*time = cpu_to_le16(twosec | (min << 5) | (hour << 11));
if (centisec)
*centisec = (unix_time % 2) * 100;
}
void exfat_tzset(void)
{
time_t now;
tzset();
now = time(NULL);
exfat_timezone = mktime(gmtime(&now)) - now;
}
fuse-exfat-1.2.3/libexfat/byteorder.h 0000664 0001750 0001750 00000004351 12622136464 014466 0000000 0000000 /*
byteorder.h (12.01.10)
Endianness stuff. exFAT uses little-endian byte order.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef BYTEORDER_H_INCLUDED
#define BYTEORDER_H_INCLUDED
#include "platform.h"
#include
#include
typedef struct { uint16_t __u16; } le16_t;
typedef struct { uint32_t __u32; } le32_t;
typedef struct { uint64_t __u64; } le64_t;
#if EXFAT_BYTE_ORDER == EXFAT_LITTLE_ENDIAN
static inline uint16_t le16_to_cpu(le16_t v) { return v.__u16; }
static inline uint32_t le32_to_cpu(le32_t v) { return v.__u32; }
static inline uint64_t le64_to_cpu(le64_t v) { return v.__u64; }
static inline le16_t cpu_to_le16(uint16_t v) { le16_t t = {v}; return t; }
static inline le32_t cpu_to_le32(uint32_t v) { le32_t t = {v}; return t; }
static inline le64_t cpu_to_le64(uint64_t v) { le64_t t = {v}; return t; }
typedef size_t bitmap_t;
#elif EXFAT_BYTE_ORDER == EXFAT_BIG_ENDIAN
static inline uint16_t le16_to_cpu(le16_t v)
{ return exfat_bswap16(v.__u16); }
static inline uint32_t le32_to_cpu(le32_t v)
{ return exfat_bswap32(v.__u32); }
static inline uint64_t le64_to_cpu(le64_t v)
{ return exfat_bswap64(v.__u64); }
static inline le16_t cpu_to_le16(uint16_t v)
{ le16_t t = {exfat_bswap16(v)}; return t; }
static inline le32_t cpu_to_le32(uint32_t v)
{ le32_t t = {exfat_bswap32(v)}; return t; }
static inline le64_t cpu_to_le64(uint64_t v)
{ le64_t t = {exfat_bswap64(v)}; return t; }
typedef unsigned char bitmap_t;
#else
#error Wow! You have a PDP machine?!
#endif
#endif /* ifndef BYTEORDER_H_INCLUDED */
fuse-exfat-1.2.3/libexfat/utils.c 0000664 0001750 0001750 00000012336 12567304245 013626 0000000 0000000 /*
utils.c (04.09.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
#include
#include
void exfat_stat(const struct exfat* ef, const struct exfat_node* node,
struct stat* stbuf)
{
memset(stbuf, 0, sizeof(struct stat));
if (node->flags & EXFAT_ATTRIB_DIR)
stbuf->st_mode = S_IFDIR | (0777 & ~ef->dmask);
else
stbuf->st_mode = S_IFREG | (0777 & ~ef->fmask);
stbuf->st_nlink = 1;
stbuf->st_uid = ef->uid;
stbuf->st_gid = ef->gid;
stbuf->st_size = node->size;
stbuf->st_blocks = DIV_ROUND_UP(node->size, CLUSTER_SIZE(*ef->sb)) *
CLUSTER_SIZE(*ef->sb) / 512;
stbuf->st_mtime = node->mtime;
stbuf->st_atime = node->atime;
/* set ctime to mtime to ensure we don't break programs that rely on ctime
(e.g. rsync) */
stbuf->st_ctime = node->mtime;
}
void exfat_get_name(const struct exfat_node* node, char* buffer, size_t n)
{
if (utf16_to_utf8(buffer, node->name, n, EXFAT_NAME_MAX) != 0)
exfat_bug("failed to convert name to UTF-8");
}
uint16_t exfat_start_checksum(const struct exfat_entry_meta1* entry)
{
uint16_t sum = 0;
int i;
for (i = 0; i < sizeof(struct exfat_entry); i++)
if (i != 2 && i != 3) /* skip checksum field itself */
sum = ((sum << 15) | (sum >> 1)) + ((const uint8_t*) entry)[i];
return sum;
}
uint16_t exfat_add_checksum(const void* entry, uint16_t sum)
{
int i;
for (i = 0; i < sizeof(struct exfat_entry); i++)
sum = ((sum << 15) | (sum >> 1)) + ((const uint8_t*) entry)[i];
return sum;
}
le16_t exfat_calc_checksum(const struct exfat_entry_meta1* meta1,
const struct exfat_entry_meta2* meta2, const le16_t* name)
{
uint16_t checksum;
const int name_entries = DIV_ROUND_UP(utf16_length(name), EXFAT_ENAME_MAX);
int i;
checksum = exfat_start_checksum(meta1);
checksum = exfat_add_checksum(meta2, checksum);
for (i = 0; i < name_entries; i++)
{
struct exfat_entry_name name_entry = {EXFAT_ENTRY_FILE_NAME, 0};
memcpy(name_entry.name, name + i * EXFAT_ENAME_MAX,
MIN(EXFAT_ENAME_MAX, EXFAT_NAME_MAX - i * EXFAT_ENAME_MAX) *
sizeof(le16_t));
checksum = exfat_add_checksum(&name_entry, checksum);
}
return cpu_to_le16(checksum);
}
uint32_t exfat_vbr_start_checksum(const void* sector, size_t size)
{
size_t i;
uint32_t sum = 0;
for (i = 0; i < size; i++)
/* skip volume_state and allocated_percent fields */
if (i != 0x6a && i != 0x6b && i != 0x70)
sum = ((sum << 31) | (sum >> 1)) + ((const uint8_t*) sector)[i];
return sum;
}
uint32_t exfat_vbr_add_checksum(const void* sector, size_t size, uint32_t sum)
{
size_t i;
for (i = 0; i < size; i++)
sum = ((sum << 31) | (sum >> 1)) + ((const uint8_t*) sector)[i];
return sum;
}
le16_t exfat_calc_name_hash(const struct exfat* ef, const le16_t* name)
{
size_t i;
size_t length = utf16_length(name);
uint16_t hash = 0;
for (i = 0; i < length; i++)
{
uint16_t c = le16_to_cpu(name[i]);
/* convert to upper case */
if (c < ef->upcase_chars)
c = le16_to_cpu(ef->upcase[c]);
hash = ((hash << 15) | (hash >> 1)) + (c & 0xff);
hash = ((hash << 15) | (hash >> 1)) + (c >> 8);
}
return cpu_to_le16(hash);
}
void exfat_humanize_bytes(uint64_t value, struct exfat_human_bytes* hb)
{
size_t i;
/* 16 EB (minus 1 byte) is the largest size that can be represented by
uint64_t */
const char* units[] = {"bytes", "KB", "MB", "GB", "TB", "PB", "EB"};
uint64_t divisor = 1;
uint64_t temp = 0;
for (i = 0; ; i++, divisor *= 1024)
{
temp = (value + divisor / 2) / divisor;
if (temp == 0)
break;
if (temp / 1024 * 1024 == temp)
continue;
if (temp < 10240)
break;
}
hb->value = temp;
hb->unit = units[i];
}
void exfat_print_info(const struct exfat_super_block* sb,
uint32_t free_clusters)
{
struct exfat_human_bytes hb;
off_t total_space = le64_to_cpu(sb->sector_count) * SECTOR_SIZE(*sb);
off_t avail_space = (off_t) free_clusters * CLUSTER_SIZE(*sb);
printf("File system version %hhu.%hhu\n",
sb->version.major, sb->version.minor);
exfat_humanize_bytes(SECTOR_SIZE(*sb), &hb);
printf("Sector size %10"PRIu64" %s\n", hb.value, hb.unit);
exfat_humanize_bytes(CLUSTER_SIZE(*sb), &hb);
printf("Cluster size %10"PRIu64" %s\n", hb.value, hb.unit);
exfat_humanize_bytes(total_space, &hb);
printf("Volume size %10"PRIu64" %s\n", hb.value, hb.unit);
exfat_humanize_bytes(total_space - avail_space, &hb);
printf("Used space %10"PRIu64" %s\n", hb.value, hb.unit);
exfat_humanize_bytes(avail_space, &hb);
printf("Available space %10"PRIu64" %s\n", hb.value, hb.unit);
}
fuse-exfat-1.2.3/libexfat/compiler.h 0000664 0001750 0001750 00000003516 12567304245 014305 0000000 0000000 /*
compiler.h (09.06.13)
Compiler-specific definitions. Note that unknown compiler is not a
showstopper.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef COMPILER_H_INCLUDED
#define COMPILER_H_INCLUDED
#if __STDC_VERSION__ < 199901L
#error C99-compliant compiler is required
#endif
#if defined(__clang__)
#define PRINTF __attribute__((format(printf, 1, 2)))
#define NORETURN __attribute__((noreturn))
#define PACKED __attribute__((packed))
#if __has_extension(c_static_assert)
#define USE_C11_STATIC_ASSERT
#endif
#elif defined(__GNUC__)
#define PRINTF __attribute__((format(printf, 1, 2)))
#define NORETURN __attribute__((noreturn))
#define PACKED __attribute__((packed))
#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
#define USE_C11_STATIC_ASSERT
#endif
#else
#define PRINTF
#define NORETURN
#define PACKED
#endif
#ifdef USE_C11_STATIC_ASSERT
#define STATIC_ASSERT(cond) _Static_assert(cond, #cond)
#else
#define CONCAT2(a, b) a ## b
#define CONCAT1(a, b) CONCAT2(a, b)
#define STATIC_ASSERT(cond) \
extern void CONCAT1(static_assert, __LINE__)(int x[(cond) ? 1 : -1])
#endif
#endif /* ifndef COMPILER_H_INCLUDED */
fuse-exfat-1.2.3/libexfat/platform.h 0000664 0001750 0001750 00000004023 12622136464 014307 0000000 0000000 /*
platform.h (14.05.13)
OS-specific code (libc-specific in fact). Note that systems with the
same kernel can use different libc implementations.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef PLATFORM_H_INCLUDED
#define PLATFORM_H_INCLUDED
#if defined(__linux__) || defined(__GLIBC__) || defined(__GNU__)
#include
#include
#define exfat_bswap16(x) bswap_16(x)
#define exfat_bswap32(x) bswap_32(x)
#define exfat_bswap64(x) bswap_64(x)
#define EXFAT_BYTE_ORDER __BYTE_ORDER
#define EXFAT_LITTLE_ENDIAN __LITTLE_ENDIAN
#define EXFAT_BIG_ENDIAN __BIG_ENDIAN
#elif defined(__APPLE__)
#include
#include
#define exfat_bswap16(x) OSSwapInt16(x)
#define exfat_bswap32(x) OSSwapInt32(x)
#define exfat_bswap64(x) OSSwapInt64(x)
#define EXFAT_BYTE_ORDER BYTE_ORDER
#define EXFAT_LITTLE_ENDIAN LITTLE_ENDIAN
#define EXFAT_BIG_ENDIAN BIG_ENDIAN
#elif defined(__FreeBSD__) || defined(__DragonFlyBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
#include
#define exfat_bswap16(x) bswap16(x)
#define exfat_bswap32(x) bswap32(x)
#define exfat_bswap64(x) bswap64(x)
#define EXFAT_BYTE_ORDER _BYTE_ORDER
#define EXFAT_LITTLE_ENDIAN _LITTLE_ENDIAN
#define EXFAT_BIG_ENDIAN _BIG_ENDIAN
#else
#error Unknown platform
#endif
#endif /* ifndef PLATFORM_H_INCLUDED */
fuse-exfat-1.2.3/libexfat/lookup.c 0000664 0001750 0001750 00000011425 12567304245 013775 0000000 0000000 /*
lookup.c (02.09.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
#include
#include
int exfat_opendir(struct exfat* ef, struct exfat_node* dir,
struct exfat_iterator* it)
{
int rc;
exfat_get_node(dir);
it->parent = dir;
it->current = NULL;
rc = exfat_cache_directory(ef, dir);
if (rc != 0)
exfat_put_node(ef, dir);
return rc;
}
void exfat_closedir(struct exfat* ef, struct exfat_iterator* it)
{
exfat_put_node(ef, it->parent);
it->parent = NULL;
it->current = NULL;
}
struct exfat_node* exfat_readdir(struct exfat* ef, struct exfat_iterator* it)
{
if (it->current == NULL)
it->current = it->parent->child;
else
it->current = it->current->next;
if (it->current != NULL)
return exfat_get_node(it->current);
else
return NULL;
}
static int compare_char(struct exfat* ef, uint16_t a, uint16_t b)
{
if (a >= ef->upcase_chars || b >= ef->upcase_chars)
return (int) a - (int) b;
return (int) le16_to_cpu(ef->upcase[a]) - (int) le16_to_cpu(ef->upcase[b]);
}
static int compare_name(struct exfat* ef, const le16_t* a, const le16_t* b)
{
while (le16_to_cpu(*a) && le16_to_cpu(*b))
{
int rc = compare_char(ef, le16_to_cpu(*a), le16_to_cpu(*b));
if (rc != 0)
return rc;
a++;
b++;
}
return compare_char(ef, le16_to_cpu(*a), le16_to_cpu(*b));
}
static int lookup_name(struct exfat* ef, struct exfat_node* parent,
struct exfat_node** node, const char* name, size_t n)
{
struct exfat_iterator it;
le16_t buffer[EXFAT_NAME_MAX + 1];
int rc;
*node = NULL;
rc = utf8_to_utf16(buffer, name, EXFAT_NAME_MAX, n);
if (rc != 0)
return rc;
rc = exfat_opendir(ef, parent, &it);
if (rc != 0)
return rc;
while ((*node = exfat_readdir(ef, &it)))
{
if (compare_name(ef, buffer, (*node)->name) == 0)
{
exfat_closedir(ef, &it);
return 0;
}
exfat_put_node(ef, *node);
}
exfat_closedir(ef, &it);
return -ENOENT;
}
static size_t get_comp(const char* path, const char** comp)
{
const char* end;
*comp = path + strspn(path, "/"); /* skip leading slashes */
end = strchr(*comp, '/');
if (end == NULL)
return strlen(*comp);
else
return end - *comp;
}
int exfat_lookup(struct exfat* ef, struct exfat_node** node,
const char* path)
{
struct exfat_node* parent;
const char* p;
size_t n;
int rc;
/* start from the root directory */
parent = *node = exfat_get_node(ef->root);
for (p = path; (n = get_comp(p, &p)); p += n)
{
if (n == 1 && *p == '.') /* skip "." component */
continue;
rc = lookup_name(ef, parent, node, p, n);
if (rc != 0)
{
exfat_put_node(ef, parent);
return rc;
}
exfat_put_node(ef, parent);
parent = *node;
}
return 0;
}
static bool is_last_comp(const char* comp, size_t length)
{
const char* p = comp + length;
return get_comp(p, &p) == 0;
}
static bool is_allowed(const char* comp, size_t length)
{
size_t i;
for (i = 0; i < length; i++)
switch (comp[i])
{
case 0x01 ... 0x1f:
case '/':
case '\\':
case ':':
case '*':
case '?':
case '"':
case '<':
case '>':
case '|':
return false;
}
return true;
}
int exfat_split(struct exfat* ef, struct exfat_node** parent,
struct exfat_node** node, le16_t* name, const char* path)
{
const char* p;
size_t n;
int rc;
memset(name, 0, (EXFAT_NAME_MAX + 1) * sizeof(le16_t));
*parent = *node = exfat_get_node(ef->root);
for (p = path; (n = get_comp(p, &p)); p += n)
{
if (n == 1 && *p == '.')
continue;
if (is_last_comp(p, n))
{
if (!is_allowed(p, n))
{
/* contains characters that are not allowed */
exfat_put_node(ef, *parent);
return -ENOENT;
}
rc = utf8_to_utf16(name, p, EXFAT_NAME_MAX, n);
if (rc != 0)
{
exfat_put_node(ef, *parent);
return rc;
}
rc = lookup_name(ef, *parent, node, p, n);
if (rc != 0 && rc != -ENOENT)
{
exfat_put_node(ef, *parent);
return rc;
}
return 0;
}
rc = lookup_name(ef, *parent, node, p, n);
if (rc != 0)
{
exfat_put_node(ef, *parent);
return rc;
}
exfat_put_node(ef, *parent);
*parent = *node;
}
exfat_bug("impossible");
}
fuse-exfat-1.2.3/libexfat/log.c 0000664 0001750 0001750 00000004433 12567304245 013246 0000000 0000000 /*
log.c (02.09.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
#include
#include
int exfat_errors;
/*
* This message means an internal bug in exFAT implementation.
*/
void exfat_bug(const char* format, ...)
{
va_list ap, aq;
va_start(ap, format);
va_copy(aq, ap);
fflush(stdout);
fputs("BUG: ", stderr);
vfprintf(stderr, format, ap);
va_end(ap);
fputs(".\n", stderr);
if (!isatty(STDERR_FILENO))
vsyslog(LOG_CRIT, format, aq);
va_end(aq);
abort();
}
/*
* This message means an error in exFAT file system.
*/
void exfat_error(const char* format, ...)
{
va_list ap, aq;
exfat_errors++;
va_start(ap, format);
va_copy(aq, ap);
fflush(stdout);
fputs("ERROR: ", stderr);
vfprintf(stderr, format, ap);
va_end(ap);
fputs(".\n", stderr);
if (!isatty(STDERR_FILENO))
vsyslog(LOG_ERR, format, aq);
va_end(aq);
}
/*
* This message means that there is something unexpected in exFAT file system
* that can be a potential problem.
*/
void exfat_warn(const char* format, ...)
{
va_list ap, aq;
va_start(ap, format);
va_copy(aq, ap);
fflush(stdout);
fputs("WARN: ", stderr);
vfprintf(stderr, format, ap);
va_end(ap);
fputs(".\n", stderr);
if (!isatty(STDERR_FILENO))
vsyslog(LOG_WARNING, format, aq);
va_end(aq);
}
/*
* Just debug message. Disabled by default.
*/
void exfat_debug(const char* format, ...)
{
va_list ap;
fflush(stdout);
fputs("DEBUG: ", stderr);
va_start(ap, format);
vfprintf(stderr, format, ap);
va_end(ap);
fputs(".\n", stderr);
}
fuse-exfat-1.2.3/libexfat/io.c 0000664 0001750 0001750 00000022457 12635170574 013104 0000000 0000000 /*
io.c (02.09.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
#include
#include
#include
#include
#include
#include
#if defined(__APPLE__)
#include
#elif defined(__OpenBSD__)
#include
#include
#include
#include
#endif
#include
#ifdef USE_UBLIO
#include
#include
#endif
struct exfat_dev
{
int fd;
enum exfat_mode mode;
off_t size; /* in bytes */
#ifdef USE_UBLIO
off_t pos;
ublio_filehandle_t ufh;
#endif
};
static int open_ro(const char* spec)
{
return open(spec, O_RDONLY);
}
static int open_rw(const char* spec)
{
int fd = open(spec, O_RDWR);
#ifdef __linux__
int ro = 0;
/*
This ioctl is needed because after "blockdev --setro" kernel still
allows to open the device in read-write mode but fails writes.
*/
if (fd != -1 && ioctl(fd, BLKROGET, &ro) == 0 && ro)
{
close(fd);
errno = EROFS;
return -1;
}
#endif
return fd;
}
struct exfat_dev* exfat_open(const char* spec, enum exfat_mode mode)
{
struct exfat_dev* dev;
struct stat stbuf;
#ifdef USE_UBLIO
struct ublio_param up;
#endif
dev = malloc(sizeof(struct exfat_dev));
if (dev == NULL)
{
exfat_error("failed to allocate memory for device structure");
return NULL;
}
switch (mode)
{
case EXFAT_MODE_RO:
dev->fd = open_ro(spec);
if (dev->fd == -1)
{
free(dev);
exfat_error("failed to open '%s' in read-only mode: %s", spec,
strerror(errno));
return NULL;
}
dev->mode = EXFAT_MODE_RO;
break;
case EXFAT_MODE_RW:
dev->fd = open_rw(spec);
if (dev->fd == -1)
{
free(dev);
exfat_error("failed to open '%s' in read-write mode: %s", spec,
strerror(errno));
return NULL;
}
dev->mode = EXFAT_MODE_RW;
break;
case EXFAT_MODE_ANY:
dev->fd = open_rw(spec);
if (dev->fd != -1)
{
dev->mode = EXFAT_MODE_RW;
break;
}
dev->fd = open_ro(spec);
if (dev->fd != -1)
{
dev->mode = EXFAT_MODE_RO;
exfat_warn("'%s' is write-protected, mounting read-only", spec);
break;
}
free(dev);
exfat_error("failed to open '%s': %s", spec, strerror(errno));
return NULL;
}
if (fstat(dev->fd, &stbuf) != 0)
{
close(dev->fd);
free(dev);
exfat_error("failed to fstat '%s'", spec);
return NULL;
}
if (!S_ISBLK(stbuf.st_mode) &&
!S_ISCHR(stbuf.st_mode) &&
!S_ISREG(stbuf.st_mode))
{
close(dev->fd);
free(dev);
exfat_error("'%s' is neither a device, nor a regular file", spec);
return NULL;
}
#if defined(__APPLE__)
if (!S_ISREG(stbuf.st_mode))
{
uint32_t block_size = 0;
uint64_t blocks = 0;
if (ioctl(dev->fd, DKIOCGETBLOCKSIZE, &block_size) != 0)
{
close(dev->fd);
free(dev);
exfat_error("failed to get block size");
return NULL;
}
if (ioctl(dev->fd, DKIOCGETBLOCKCOUNT, &blocks) != 0)
{
close(dev->fd);
free(dev);
exfat_error("failed to get blocks count");
return NULL;
}
dev->size = blocks * block_size;
}
else
#elif defined(__OpenBSD__)
if (!S_ISREG(stbuf.st_mode))
{
struct disklabel lab;
struct partition* pp;
char* partition;
if (ioctl(dev->fd, DIOCGDINFO, &lab) == -1)
{
close(dev->fd);
free(dev);
exfat_error("failed to get disklabel");
return NULL;
}
/* Don't need to check that partition letter is valid as we won't get
this far otherwise. */
partition = strchr(spec, '\0') - 1;
pp = &(lab.d_partitions[*partition - 'a']);
dev->size = DL_GETPSIZE(pp) * lab.d_secsize;
if (pp->p_fstype != FS_NTFS)
exfat_warn("partition type is not 0x07 (NTFS/exFAT); "
"you can fix this with fdisk(8)");
}
else
#endif
{
/* works for Linux, FreeBSD, Solaris */
dev->size = exfat_seek(dev, 0, SEEK_END);
if (dev->size <= 0)
{
close(dev->fd);
free(dev);
exfat_error("failed to get size of '%s'", spec);
return NULL;
}
if (exfat_seek(dev, 0, SEEK_SET) == -1)
{
close(dev->fd);
free(dev);
exfat_error("failed to seek to the beginning of '%s'", spec);
return NULL;
}
}
#ifdef USE_UBLIO
memset(&up, 0, sizeof(struct ublio_param));
up.up_blocksize = 256 * 1024;
up.up_items = 64;
up.up_grace = 32;
up.up_priv = &dev->fd;
dev->pos = 0;
dev->ufh = ublio_open(&up);
if (dev->ufh == NULL)
{
close(dev->fd);
free(dev);
exfat_error("failed to initialize ublio");
return NULL;
}
#endif
return dev;
}
int exfat_close(struct exfat_dev* dev)
{
int rc = 0;
#ifdef USE_UBLIO
if (ublio_close(dev->ufh) != 0)
{
exfat_error("failed to close ublio");
rc = -EIO;
}
#endif
if (close(dev->fd) != 0)
{
exfat_error("failed to close device: %s", strerror(errno));
rc = -EIO;
}
free(dev);
return rc;
}
int exfat_fsync(struct exfat_dev* dev)
{
int rc = 0;
#ifdef USE_UBLIO
if (ublio_fsync(dev->ufh) != 0)
{
exfat_error("ublio fsync failed");
rc = -EIO;
}
#endif
if (fsync(dev->fd) != 0)
{
exfat_error("fsync failed: %s", strerror(errno));
rc = -EIO;
}
return rc;
}
enum exfat_mode exfat_get_mode(const struct exfat_dev* dev)
{
return dev->mode;
}
off_t exfat_get_size(const struct exfat_dev* dev)
{
return dev->size;
}
off_t exfat_seek(struct exfat_dev* dev, off_t offset, int whence)
{
#ifdef USE_UBLIO
/* XXX SEEK_CUR will be handled incorrectly */
return dev->pos = lseek(dev->fd, offset, whence);
#else
return lseek(dev->fd, offset, whence);
#endif
}
ssize_t exfat_read(struct exfat_dev* dev, void* buffer, size_t size)
{
#ifdef USE_UBLIO
ssize_t result = ublio_pread(dev->ufh, buffer, size, dev->pos);
if (result >= 0)
dev->pos += size;
return result;
#else
return read(dev->fd, buffer, size);
#endif
}
ssize_t exfat_write(struct exfat_dev* dev, const void* buffer, size_t size)
{
#ifdef USE_UBLIO
ssize_t result = ublio_pwrite(dev->ufh, buffer, size, dev->pos);
if (result >= 0)
dev->pos += size;
return result;
#else
return write(dev->fd, buffer, size);
#endif
}
ssize_t exfat_pread(struct exfat_dev* dev, void* buffer, size_t size,
off_t offset)
{
#ifdef USE_UBLIO
return ublio_pread(dev->ufh, buffer, size, offset);
#else
return pread(dev->fd, buffer, size, offset);
#endif
}
ssize_t exfat_pwrite(struct exfat_dev* dev, const void* buffer, size_t size,
off_t offset)
{
#ifdef USE_UBLIO
return ublio_pwrite(dev->ufh, buffer, size, offset);
#else
return pwrite(dev->fd, buffer, size, offset);
#endif
}
ssize_t exfat_generic_pread(const struct exfat* ef, struct exfat_node* node,
void* buffer, size_t size, off_t offset)
{
cluster_t cluster;
char* bufp = buffer;
off_t lsize, loffset, remainder;
if (offset >= node->size)
return 0;
if (size == 0)
return 0;
cluster = exfat_advance_cluster(ef, node, offset / CLUSTER_SIZE(*ef->sb));
if (CLUSTER_INVALID(cluster))
{
exfat_error("invalid cluster 0x%x while reading", cluster);
return -1;
}
loffset = offset % CLUSTER_SIZE(*ef->sb);
remainder = MIN(size, node->size - offset);
while (remainder > 0)
{
if (CLUSTER_INVALID(cluster))
{
exfat_error("invalid cluster 0x%x while reading", cluster);
return -1;
}
lsize = MIN(CLUSTER_SIZE(*ef->sb) - loffset, remainder);
if (exfat_pread(ef->dev, bufp, lsize,
exfat_c2o(ef, cluster) + loffset) < 0)
{
exfat_error("failed to read cluster %#x", cluster);
return -1;
}
bufp += lsize;
loffset = 0;
remainder -= lsize;
cluster = exfat_next_cluster(ef, node, cluster);
}
if (!ef->ro && !ef->noatime)
exfat_update_atime(node);
return MIN(size, node->size - offset) - remainder;
}
ssize_t exfat_generic_pwrite(struct exfat* ef, struct exfat_node* node,
const void* buffer, size_t size, off_t offset)
{
cluster_t cluster;
const char* bufp = buffer;
off_t lsize, loffset, remainder;
if (offset > node->size)
if (exfat_truncate(ef, node, offset, true) != 0)
return -1;
if (offset + size > node->size)
if (exfat_truncate(ef, node, offset + size, false) != 0)
return -1;
if (size == 0)
return 0;
cluster = exfat_advance_cluster(ef, node, offset / CLUSTER_SIZE(*ef->sb));
if (CLUSTER_INVALID(cluster))
{
exfat_error("invalid cluster 0x%x while writing", cluster);
return -1;
}
loffset = offset % CLUSTER_SIZE(*ef->sb);
remainder = size;
while (remainder > 0)
{
if (CLUSTER_INVALID(cluster))
{
exfat_error("invalid cluster 0x%x while writing", cluster);
return -1;
}
lsize = MIN(CLUSTER_SIZE(*ef->sb) - loffset, remainder);
if (exfat_pwrite(ef->dev, bufp, lsize,
exfat_c2o(ef, cluster) + loffset) < 0)
{
exfat_error("failed to write cluster %#x", cluster);
return -1;
}
bufp += lsize;
loffset = 0;
remainder -= lsize;
cluster = exfat_next_cluster(ef, node, cluster);
}
exfat_update_mtime(node);
return size - remainder;
}
fuse-exfat-1.2.3/libexfat/config.h.in 0000664 0001750 0001750 00000001644 12635220207 014334 0000000 0000000 /* libexfat/config.h.in. Generated from configure.ac by autoheader. */
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Version number of package */
#undef VERSION
/* Enable large inode numbers on Mac OS X 10.5. */
#ifndef _DARWIN_USE_64_BIT_INODE
# define _DARWIN_USE_64_BIT_INODE 1
#endif
/* Number of bits in a file offset, on hosts where this is settable. */
#undef _FILE_OFFSET_BITS
/* Define for large files, on AIX-style hosts. */
#undef _LARGE_FILES
fuse-exfat-1.2.3/libexfat/Makefile.in 0000664 0001750 0001750 00000043150 12635220206 014353 0000000 0000000 # Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Makefile.am (30.03.15)
# Automake source.
#
# Free exFAT implementation.
# Copyright (C) 2010-2015 Andrew Nayenko
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = libexfat
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
AM_V_AR = $(am__v_AR_@AM_V@)
am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
am__v_AR_0 = @echo " AR " $@;
am__v_AR_1 =
libexfat_a_AR = $(AR) $(ARFLAGS)
libexfat_a_LIBADD =
am_libexfat_a_OBJECTS = cluster.$(OBJEXT) io.$(OBJEXT) log.$(OBJEXT) \
lookup.$(OBJEXT) mount.$(OBJEXT) node.$(OBJEXT) time.$(OBJEXT) \
utf.$(OBJEXT) utils.$(OBJEXT)
libexfat_a_OBJECTS = $(am_libexfat_a_OBJECTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(libexfat_a_SOURCES)
DIST_SOURCES = $(libexfat_a_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EXEEXT = @EXEEXT@
FUSE_CFLAGS = @FUSE_CFLAGS@
FUSE_LIBS = @FUSE_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libexfat.a
libexfat_a_SOURCES = \
byteorder.h \
cluster.c \
compiler.h \
exfat.h \
exfatfs.h \
io.c \
log.c \
lookup.c \
mount.c \
node.c \
platform.h \
time.c \
utf.c \
utils.c
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libexfat/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign libexfat/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status libexfat/config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libexfat.a: $(libexfat_a_OBJECTS) $(libexfat_a_DEPENDENCIES) $(EXTRA_libexfat_a_DEPENDENCIES)
$(AM_V_at)-rm -f libexfat.a
$(AM_V_AR)$(libexfat_a_AR) libexfat.a $(libexfat_a_OBJECTS) $(libexfat_a_LIBADD)
$(AM_V_at)$(RANLIB) libexfat.a
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cluster.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/log.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lookup.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mount.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/node.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/time.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(LIBRARIES) config.h
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am:
.MAKE: all install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES cscopelist-am ctags ctags-am distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
fuse-exfat-1.2.3/libexfat/cluster.c 0000664 0001750 0001750 00000030050 12622136464 014136 0000000 0000000 /*
cluster.c (03.09.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
#include
#include
/*
* Sector to absolute offset.
*/
static off_t s2o(const struct exfat* ef, off_t sector)
{
return sector << ef->sb->sector_bits;
}
/*
* Cluster to sector.
*/
static off_t c2s(const struct exfat* ef, cluster_t cluster)
{
if (cluster < EXFAT_FIRST_DATA_CLUSTER)
exfat_bug("invalid cluster number %u", cluster);
return le32_to_cpu(ef->sb->cluster_sector_start) +
((off_t) (cluster - EXFAT_FIRST_DATA_CLUSTER) << ef->sb->spc_bits);
}
/*
* Cluster to absolute offset.
*/
off_t exfat_c2o(const struct exfat* ef, cluster_t cluster)
{
return s2o(ef, c2s(ef, cluster));
}
/*
* Sector to cluster.
*/
static cluster_t s2c(const struct exfat* ef, off_t sector)
{
return ((sector - le32_to_cpu(ef->sb->cluster_sector_start)) >>
ef->sb->spc_bits) + EXFAT_FIRST_DATA_CLUSTER;
}
/*
* Size in bytes to size in clusters (rounded upwards).
*/
static uint32_t bytes2clusters(const struct exfat* ef, uint64_t bytes)
{
uint64_t cluster_size = CLUSTER_SIZE(*ef->sb);
return (bytes + cluster_size - 1) / cluster_size;
}
cluster_t exfat_next_cluster(const struct exfat* ef,
const struct exfat_node* node, cluster_t cluster)
{
le32_t next;
off_t fat_offset;
if (cluster < EXFAT_FIRST_DATA_CLUSTER)
exfat_bug("bad cluster 0x%x", cluster);
if (IS_CONTIGUOUS(*node))
return cluster + 1;
fat_offset = s2o(ef, le32_to_cpu(ef->sb->fat_sector_start))
+ cluster * sizeof(cluster_t);
if (exfat_pread(ef->dev, &next, sizeof(next), fat_offset) < 0)
return EXFAT_CLUSTER_BAD; /* the caller should handle this and print
appropriate error message */
return le32_to_cpu(next);
}
cluster_t exfat_advance_cluster(const struct exfat* ef,
struct exfat_node* node, uint32_t count)
{
uint32_t i;
if (node->fptr_index > count)
{
node->fptr_index = 0;
node->fptr_cluster = node->start_cluster;
}
for (i = node->fptr_index; i < count; i++)
{
node->fptr_cluster = exfat_next_cluster(ef, node, node->fptr_cluster);
if (CLUSTER_INVALID(node->fptr_cluster))
break; /* the caller should handle this and print appropriate
error message */
}
node->fptr_index = count;
return node->fptr_cluster;
}
static cluster_t find_bit_and_set(bitmap_t* bitmap, size_t start, size_t end)
{
const size_t start_index = start / sizeof(bitmap_t) / 8;
const size_t end_index = DIV_ROUND_UP(end, sizeof(bitmap_t) * 8);
size_t i;
size_t start_bitindex;
size_t end_bitindex;
size_t c;
for (i = start_index; i < end_index; i++)
{
if (bitmap[i] == ~((bitmap_t) 0))
continue;
start_bitindex = MAX(i * sizeof(bitmap_t) * 8, start);
end_bitindex = MIN((i + 1) * sizeof(bitmap_t) * 8, end);
for (c = start_bitindex; c < end_bitindex; c++)
if (BMAP_GET(bitmap, c) == 0)
{
BMAP_SET(bitmap, c);
return c + EXFAT_FIRST_DATA_CLUSTER;
}
}
return EXFAT_CLUSTER_END;
}
static int flush_nodes(struct exfat* ef, struct exfat_node* node)
{
struct exfat_node* p;
for (p = node->child; p != NULL; p = p->next)
{
int rc = flush_nodes(ef, p);
if (rc != 0)
return rc;
}
return exfat_flush_node(ef, node);
}
int exfat_flush_nodes(struct exfat* ef)
{
return flush_nodes(ef, ef->root);
}
int exfat_flush(struct exfat* ef)
{
if (ef->cmap.dirty)
{
if (exfat_pwrite(ef->dev, ef->cmap.chunk,
BMAP_SIZE(ef->cmap.chunk_size),
exfat_c2o(ef, ef->cmap.start_cluster)) < 0)
{
exfat_error("failed to write clusters bitmap");
return -EIO;
}
ef->cmap.dirty = false;
}
return 0;
}
static bool set_next_cluster(const struct exfat* ef, bool contiguous,
cluster_t current, cluster_t next)
{
off_t fat_offset;
le32_t next_le32;
if (contiguous)
return true;
fat_offset = s2o(ef, le32_to_cpu(ef->sb->fat_sector_start))
+ current * sizeof(cluster_t);
next_le32 = cpu_to_le32(next);
if (exfat_pwrite(ef->dev, &next_le32, sizeof(next_le32), fat_offset) < 0)
{
exfat_error("failed to write the next cluster %#x after %#x", next,
current);
return false;
}
return true;
}
static cluster_t allocate_cluster(struct exfat* ef, cluster_t hint)
{
cluster_t cluster;
hint -= EXFAT_FIRST_DATA_CLUSTER;
if (hint >= ef->cmap.chunk_size)
hint = 0;
cluster = find_bit_and_set(ef->cmap.chunk, hint, ef->cmap.chunk_size);
if (cluster == EXFAT_CLUSTER_END)
cluster = find_bit_and_set(ef->cmap.chunk, 0, hint);
if (cluster == EXFAT_CLUSTER_END)
{
exfat_error("no free space left");
return EXFAT_CLUSTER_END;
}
ef->cmap.dirty = true;
return cluster;
}
static void free_cluster(struct exfat* ef, cluster_t cluster)
{
if (CLUSTER_INVALID(cluster))
exfat_bug("freeing invalid cluster 0x%x", cluster);
if (cluster - EXFAT_FIRST_DATA_CLUSTER >= ef->cmap.size)
exfat_bug("freeing non-existing cluster 0x%x (0x%x)", cluster,
ef->cmap.size);
BMAP_CLR(ef->cmap.chunk, cluster - EXFAT_FIRST_DATA_CLUSTER);
ef->cmap.dirty = true;
}
static bool make_noncontiguous(const struct exfat* ef, cluster_t first,
cluster_t last)
{
cluster_t c;
for (c = first; c < last; c++)
if (!set_next_cluster(ef, false, c, c + 1))
return false;
return true;
}
static int shrink_file(struct exfat* ef, struct exfat_node* node,
uint32_t current, uint32_t difference);
static int grow_file(struct exfat* ef, struct exfat_node* node,
uint32_t current, uint32_t difference)
{
cluster_t previous;
cluster_t next;
uint32_t allocated = 0;
if (difference == 0)
exfat_bug("zero clusters count passed");
if (node->start_cluster != EXFAT_CLUSTER_FREE)
{
/* get the last cluster of the file */
previous = exfat_advance_cluster(ef, node, current - 1);
if (CLUSTER_INVALID(previous))
{
exfat_error("invalid cluster 0x%x while growing", previous);
return -EIO;
}
}
else
{
if (node->fptr_index != 0)
exfat_bug("non-zero pointer index (%u)", node->fptr_index);
/* file does not have clusters (i.e. is empty), allocate
the first one for it */
previous = allocate_cluster(ef, 0);
if (CLUSTER_INVALID(previous))
return -ENOSPC;
node->fptr_cluster = node->start_cluster = previous;
allocated = 1;
/* file consists of only one cluster, so it's contiguous */
node->flags |= EXFAT_ATTRIB_CONTIGUOUS;
}
while (allocated < difference)
{
next = allocate_cluster(ef, previous + 1);
if (CLUSTER_INVALID(next))
{
if (allocated != 0)
shrink_file(ef, node, current + allocated, allocated);
return -ENOSPC;
}
if (next != previous - 1 && IS_CONTIGUOUS(*node))
{
/* it's a pity, but we are not able to keep the file contiguous
anymore */
if (!make_noncontiguous(ef, node->start_cluster, previous))
return -EIO;
node->flags &= ~EXFAT_ATTRIB_CONTIGUOUS;
node->flags |= EXFAT_ATTRIB_DIRTY;
}
if (!set_next_cluster(ef, IS_CONTIGUOUS(*node), previous, next))
return -EIO;
previous = next;
allocated++;
}
if (!set_next_cluster(ef, IS_CONTIGUOUS(*node), previous,
EXFAT_CLUSTER_END))
return -EIO;
return 0;
}
static int shrink_file(struct exfat* ef, struct exfat_node* node,
uint32_t current, uint32_t difference)
{
cluster_t previous;
cluster_t next;
if (difference == 0)
exfat_bug("zero difference passed");
if (node->start_cluster == EXFAT_CLUSTER_FREE)
exfat_bug("unable to shrink empty file (%u clusters)", current);
if (current < difference)
exfat_bug("file underflow (%u < %u)", current, difference);
/* crop the file */
if (current > difference)
{
cluster_t last = exfat_advance_cluster(ef, node,
current - difference - 1);
if (CLUSTER_INVALID(last))
{
exfat_error("invalid cluster 0x%x while shrinking", last);
return -EIO;
}
previous = exfat_next_cluster(ef, node, last);
if (!set_next_cluster(ef, IS_CONTIGUOUS(*node), last,
EXFAT_CLUSTER_END))
return -EIO;
}
else
{
previous = node->start_cluster;
node->start_cluster = EXFAT_CLUSTER_FREE;
node->flags |= EXFAT_ATTRIB_DIRTY;
}
node->fptr_index = 0;
node->fptr_cluster = node->start_cluster;
/* free remaining clusters */
while (difference--)
{
if (CLUSTER_INVALID(previous))
{
exfat_error("invalid cluster 0x%x while freeing after shrink",
previous);
return -EIO;
}
next = exfat_next_cluster(ef, node, previous);
if (!set_next_cluster(ef, IS_CONTIGUOUS(*node), previous,
EXFAT_CLUSTER_FREE))
return -EIO;
free_cluster(ef, previous);
previous = next;
}
return 0;
}
static bool erase_raw(struct exfat* ef, size_t size, off_t offset)
{
if (exfat_pwrite(ef->dev, ef->zero_cluster, size, offset) < 0)
{
exfat_error("failed to erase %zu bytes at %"PRId64, size, offset);
return false;
}
return true;
}
static int erase_range(struct exfat* ef, struct exfat_node* node,
uint64_t begin, uint64_t end)
{
uint64_t cluster_boundary;
cluster_t cluster;
if (begin >= end)
return 0;
cluster_boundary = (begin | (CLUSTER_SIZE(*ef->sb) - 1)) + 1;
cluster = exfat_advance_cluster(ef, node,
begin / CLUSTER_SIZE(*ef->sb));
if (CLUSTER_INVALID(cluster))
{
exfat_error("invalid cluster 0x%x while erasing", cluster);
return -EIO;
}
/* erase from the beginning to the closest cluster boundary */
if (!erase_raw(ef, MIN(cluster_boundary, end) - begin,
exfat_c2o(ef, cluster) + begin % CLUSTER_SIZE(*ef->sb)))
return -EIO;
/* erase whole clusters */
while (cluster_boundary < end)
{
cluster = exfat_next_cluster(ef, node, cluster);
/* the cluster cannot be invalid because we have just allocated it */
if (CLUSTER_INVALID(cluster))
exfat_bug("invalid cluster 0x%x after allocation", cluster);
if (!erase_raw(ef, CLUSTER_SIZE(*ef->sb), exfat_c2o(ef, cluster)))
return -EIO;
cluster_boundary += CLUSTER_SIZE(*ef->sb);
}
return 0;
}
int exfat_truncate(struct exfat* ef, struct exfat_node* node, uint64_t size,
bool erase)
{
uint32_t c1 = bytes2clusters(ef, node->size);
uint32_t c2 = bytes2clusters(ef, size);
int rc = 0;
if (node->references == 0 && node->parent)
exfat_bug("no references, node changes can be lost");
if (node->size == size)
return 0;
if (c1 < c2)
rc = grow_file(ef, node, c1, c2 - c1);
else if (c1 > c2)
rc = shrink_file(ef, node, c1, c1 - c2);
if (rc != 0)
return rc;
if (erase)
{
rc = erase_range(ef, node, node->size, size);
if (rc != 0)
return rc;
}
exfat_update_mtime(node);
node->size = size;
node->flags |= EXFAT_ATTRIB_DIRTY;
return 0;
}
uint32_t exfat_count_free_clusters(const struct exfat* ef)
{
uint32_t free_clusters = 0;
uint32_t i;
for (i = 0; i < ef->cmap.size; i++)
if (BMAP_GET(ef->cmap.chunk, i) == 0)
free_clusters++;
return free_clusters;
}
static int find_used_clusters(const struct exfat* ef,
cluster_t* a, cluster_t* b)
{
const cluster_t end = le32_to_cpu(ef->sb->cluster_count);
/* find first used cluster */
for (*a = *b + 1; *a < end; (*a)++)
if (BMAP_GET(ef->cmap.chunk, *a - EXFAT_FIRST_DATA_CLUSTER))
break;
if (*a >= end)
return 1;
/* find last contiguous used cluster */
for (*b = *a; *b < end; (*b)++)
if (BMAP_GET(ef->cmap.chunk, *b - EXFAT_FIRST_DATA_CLUSTER) == 0)
{
(*b)--;
break;
}
return 0;
}
int exfat_find_used_sectors(const struct exfat* ef, off_t* a, off_t* b)
{
cluster_t ca, cb;
if (*a == 0 && *b == 0)
ca = cb = EXFAT_FIRST_DATA_CLUSTER - 1;
else
{
ca = s2c(ef, *a);
cb = s2c(ef, *b);
}
if (find_used_clusters(ef, &ca, &cb) != 0)
return 1;
if (*a != 0 || *b != 0)
*a = c2s(ef, ca);
*b = c2s(ef, cb) + (CLUSTER_SIZE(*ef->sb) - 1) / SECTOR_SIZE(*ef->sb);
return 0;
}
fuse-exfat-1.2.3/libexfat/exfat.h 0000664 0001750 0001750 00000017433 12622136464 013603 0000000 0000000 /*
exfat.h (29.08.09)
Definitions of structures and constants used in exFAT file system
implementation.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef EXFAT_H_INCLUDED
#define EXFAT_H_INCLUDED
#include "config.h"
#include "compiler.h"
#include "exfatfs.h"
#include
#include
#include
#include
#include
#include
#define EXFAT_NAME_MAX 256
#define EXFAT_ATTRIB_CONTIGUOUS 0x10000
#define EXFAT_ATTRIB_CACHED 0x20000
#define EXFAT_ATTRIB_DIRTY 0x40000
#define EXFAT_ATTRIB_UNLINKED 0x80000
#define IS_CONTIGUOUS(node) (((node).flags & EXFAT_ATTRIB_CONTIGUOUS) != 0)
#define SECTOR_SIZE(sb) (1 << (sb).sector_bits)
#define CLUSTER_SIZE(sb) (SECTOR_SIZE(sb) << (sb).spc_bits)
#define CLUSTER_INVALID(c) \
((c) < EXFAT_FIRST_DATA_CLUSTER || (c) > EXFAT_LAST_DATA_CLUSTER)
#define MIN(a, b) ((a) < (b) ? (a) : (b))
#define MAX(a, b) ((a) > (b) ? (a) : (b))
#define DIV_ROUND_UP(x, d) (((x) + (d) - 1) / (d))
#define ROUND_UP(x, d) (DIV_ROUND_UP(x, d) * (d))
#define UTF8_BYTES(c) ((c) * 6) /* UTF-8 character can occupy up to 6 bytes */
#define BMAP_SIZE(count) (ROUND_UP(count, sizeof(bitmap_t) * 8) / 8)
#define BMAP_BLOCK(index) ((index) / sizeof(bitmap_t) / 8)
#define BMAP_MASK(index) ((bitmap_t) 1 << ((index) % (sizeof(bitmap_t) * 8)))
#define BMAP_GET(bitmap, index) \
((bitmap)[BMAP_BLOCK(index)] & BMAP_MASK(index))
#define BMAP_SET(bitmap, index) \
((bitmap)[BMAP_BLOCK(index)] |= BMAP_MASK(index))
#define BMAP_CLR(bitmap, index) \
((bitmap)[BMAP_BLOCK(index)] &= ~BMAP_MASK(index))
/* The size of off_t type must be 64 bits. File systems larger than 2 GB will
be corrupted with 32-bit off_t. */
STATIC_ASSERT(sizeof(off_t) == 8);
struct exfat_node
{
struct exfat_node* parent;
struct exfat_node* child;
struct exfat_node* next;
struct exfat_node* prev;
int references;
uint32_t fptr_index;
cluster_t fptr_cluster;
cluster_t entry_cluster;
off_t entry_offset;
cluster_t start_cluster;
int flags;
uint64_t size;
time_t mtime, atime;
le16_t name[EXFAT_NAME_MAX + 1];
};
enum exfat_mode
{
EXFAT_MODE_RO,
EXFAT_MODE_RW,
EXFAT_MODE_ANY,
};
struct exfat_dev;
struct exfat
{
struct exfat_dev* dev;
struct exfat_super_block* sb;
le16_t* upcase;
size_t upcase_chars;
struct exfat_node* root;
struct
{
cluster_t start_cluster;
uint32_t size; /* in bits */
bitmap_t* chunk;
uint32_t chunk_size; /* in bits */
bool dirty;
}
cmap;
char label[UTF8_BYTES(EXFAT_ENAME_MAX) + 1];
void* zero_cluster;
int dmask, fmask;
uid_t uid;
gid_t gid;
int ro;
bool noatime;
};
/* in-core nodes iterator */
struct exfat_iterator
{
struct exfat_node* parent;
struct exfat_node* current;
};
struct exfat_human_bytes
{
uint64_t value;
const char* unit;
};
extern int exfat_errors;
void exfat_bug(const char* format, ...) PRINTF NORETURN;
void exfat_error(const char* format, ...) PRINTF;
void exfat_warn(const char* format, ...) PRINTF;
void exfat_debug(const char* format, ...) PRINTF;
struct exfat_dev* exfat_open(const char* spec, enum exfat_mode mode);
int exfat_close(struct exfat_dev* dev);
int exfat_fsync(struct exfat_dev* dev);
enum exfat_mode exfat_get_mode(const struct exfat_dev* dev);
off_t exfat_get_size(const struct exfat_dev* dev);
off_t exfat_seek(struct exfat_dev* dev, off_t offset, int whence);
ssize_t exfat_read(struct exfat_dev* dev, void* buffer, size_t size);
ssize_t exfat_write(struct exfat_dev* dev, const void* buffer, size_t size);
ssize_t exfat_pread(struct exfat_dev* dev, void* buffer, size_t size,
off_t offset);
ssize_t exfat_pwrite(struct exfat_dev* dev, const void* buffer, size_t size,
off_t offset);
ssize_t exfat_generic_pread(const struct exfat* ef, struct exfat_node* node,
void* buffer, size_t size, off_t offset);
ssize_t exfat_generic_pwrite(struct exfat* ef, struct exfat_node* node,
const void* buffer, size_t size, off_t offset);
int exfat_opendir(struct exfat* ef, struct exfat_node* dir,
struct exfat_iterator* it);
void exfat_closedir(struct exfat* ef, struct exfat_iterator* it);
struct exfat_node* exfat_readdir(struct exfat* ef, struct exfat_iterator* it);
int exfat_lookup(struct exfat* ef, struct exfat_node** node,
const char* path);
int exfat_split(struct exfat* ef, struct exfat_node** parent,
struct exfat_node** node, le16_t* name, const char* path);
off_t exfat_c2o(const struct exfat* ef, cluster_t cluster);
cluster_t exfat_next_cluster(const struct exfat* ef,
const struct exfat_node* node, cluster_t cluster);
cluster_t exfat_advance_cluster(const struct exfat* ef,
struct exfat_node* node, uint32_t count);
int exfat_flush_nodes(struct exfat* ef);
int exfat_flush(struct exfat* ef);
int exfat_truncate(struct exfat* ef, struct exfat_node* node, uint64_t size,
bool erase);
uint32_t exfat_count_free_clusters(const struct exfat* ef);
int exfat_find_used_sectors(const struct exfat* ef, off_t* a, off_t* b);
void exfat_stat(const struct exfat* ef, const struct exfat_node* node,
struct stat* stbuf);
void exfat_get_name(const struct exfat_node* node, char* buffer, size_t n);
uint16_t exfat_start_checksum(const struct exfat_entry_meta1* entry);
uint16_t exfat_add_checksum(const void* entry, uint16_t sum);
le16_t exfat_calc_checksum(const struct exfat_entry_meta1* meta1,
const struct exfat_entry_meta2* meta2, const le16_t* name);
uint32_t exfat_vbr_start_checksum(const void* sector, size_t size);
uint32_t exfat_vbr_add_checksum(const void* sector, size_t size, uint32_t sum);
le16_t exfat_calc_name_hash(const struct exfat* ef, const le16_t* name);
void exfat_humanize_bytes(uint64_t value, struct exfat_human_bytes* hb);
void exfat_print_info(const struct exfat_super_block* sb,
uint32_t free_clusters);
int utf16_to_utf8(char* output, const le16_t* input, size_t outsize,
size_t insize);
int utf8_to_utf16(le16_t* output, const char* input, size_t outsize,
size_t insize);
size_t utf16_length(const le16_t* str);
struct exfat_node* exfat_get_node(struct exfat_node* node);
void exfat_put_node(struct exfat* ef, struct exfat_node* node);
int exfat_cleanup_node(struct exfat* ef, struct exfat_node* node);
int exfat_cache_directory(struct exfat* ef, struct exfat_node* dir);
void exfat_reset_cache(struct exfat* ef);
int exfat_flush_node(struct exfat* ef, struct exfat_node* node);
int exfat_unlink(struct exfat* ef, struct exfat_node* node);
int exfat_rmdir(struct exfat* ef, struct exfat_node* node);
int exfat_mknod(struct exfat* ef, const char* path);
int exfat_mkdir(struct exfat* ef, const char* path);
int exfat_rename(struct exfat* ef, const char* old_path, const char* new_path);
void exfat_utimes(struct exfat_node* node, const struct timespec tv[2]);
void exfat_update_atime(struct exfat_node* node);
void exfat_update_mtime(struct exfat_node* node);
const char* exfat_get_label(struct exfat* ef);
int exfat_set_label(struct exfat* ef, const char* label);
int exfat_mount(struct exfat* ef, const char* spec, const char* options);
void exfat_unmount(struct exfat* ef);
time_t exfat_exfat2unix(le16_t date, le16_t time, uint8_t centisec);
void exfat_unix2exfat(time_t unix_time, le16_t* date, le16_t* time,
uint8_t* centisec);
void exfat_tzset(void);
#endif /* ifndef EXFAT_H_INCLUDED */
fuse-exfat-1.2.3/libexfat/mount.c 0000664 0001750 0001750 00000023422 12624535421 013622 0000000 0000000 /*
mount.c (22.10.09)
exFAT file system implementation library.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "exfat.h"
#include
#include
#include
#include
#include
#include
static uint64_t rootdir_size(const struct exfat* ef)
{
uint32_t clusters = 0;
uint32_t clusters_max = le32_to_cpu(ef->sb->cluster_count);
cluster_t rootdir_cluster = le32_to_cpu(ef->sb->rootdir_cluster);
/* Iterate all clusters of the root directory to calculate its size.
It can't be contiguous because there is no flag to indicate this. */
do
{
if (clusters == clusters_max) /* infinite loop detected */
{
exfat_error("root directory cannot occupy all %d clusters",
clusters);
return 0;
}
if (CLUSTER_INVALID(rootdir_cluster))
{
exfat_error("bad cluster %#x while reading root directory",
rootdir_cluster);
return 0;
}
rootdir_cluster = exfat_next_cluster(ef, ef->root, rootdir_cluster);
clusters++;
}
while (rootdir_cluster != EXFAT_CLUSTER_END);
return (uint64_t) clusters * CLUSTER_SIZE(*ef->sb);
}
static const char* get_option(const char* options, const char* option_name)
{
const char* p;
size_t length = strlen(option_name);
for (p = strstr(options, option_name); p; p = strstr(p + 1, option_name))
if ((p == options || p[-1] == ',') && p[length] == '=')
return p + length + 1;
return NULL;
}
static int get_int_option(const char* options, const char* option_name,
int base, int default_value)
{
const char* p = get_option(options, option_name);
if (p == NULL)
return default_value;
return strtol(p, NULL, base);
}
static bool match_option(const char* options, const char* option_name)
{
const char* p;
size_t length = strlen(option_name);
for (p = strstr(options, option_name); p; p = strstr(p + 1, option_name))
if ((p == options || p[-1] == ',') &&
(p[length] == ',' || p[length] == '\0'))
return true;
return false;
}
static void parse_options(struct exfat* ef, const char* options)
{
int opt_umask;
opt_umask = get_int_option(options, "umask", 8, 0);
ef->dmask = get_int_option(options, "dmask", 8, opt_umask);
ef->fmask = get_int_option(options, "fmask", 8, opt_umask);
ef->uid = get_int_option(options, "uid", 10, geteuid());
ef->gid = get_int_option(options, "gid", 10, getegid());
ef->noatime = match_option(options, "noatime");
}
static bool verify_vbr_checksum(struct exfat_dev* dev, void* sector,
off_t sector_size)
{
uint32_t vbr_checksum;
int i;
if (exfat_pread(dev, sector, sector_size, 0) < 0)
{
exfat_error("failed to read boot sector");
return false;
}
vbr_checksum = exfat_vbr_start_checksum(sector, sector_size);
for (i = 1; i < 11; i++)
{
if (exfat_pread(dev, sector, sector_size, i * sector_size) < 0)
{
exfat_error("failed to read VBR sector");
return false;
}
vbr_checksum = exfat_vbr_add_checksum(sector, sector_size,
vbr_checksum);
}
if (exfat_pread(dev, sector, sector_size, i * sector_size) < 0)
{
exfat_error("failed to read VBR checksum sector");
return false;
}
for (i = 0; i < sector_size / sizeof(vbr_checksum); i++)
if (le32_to_cpu(((const le32_t*) sector)[i]) != vbr_checksum)
{
exfat_error("invalid VBR checksum 0x%x (expected 0x%x)",
le32_to_cpu(((const le32_t*) sector)[i]), vbr_checksum);
return false;
}
return true;
}
static int commit_super_block(const struct exfat* ef)
{
if (exfat_pwrite(ef->dev, ef->sb, sizeof(struct exfat_super_block), 0) < 0)
{
exfat_error("failed to write super block");
return 1;
}
return exfat_fsync(ef->dev);
}
static int prepare_super_block(const struct exfat* ef)
{
if (le16_to_cpu(ef->sb->volume_state) & EXFAT_STATE_MOUNTED)
exfat_warn("volume was not unmounted cleanly");
if (ef->ro)
return 0;
ef->sb->volume_state = cpu_to_le16(
le16_to_cpu(ef->sb->volume_state) | EXFAT_STATE_MOUNTED);
return commit_super_block(ef);
}
int exfat_mount(struct exfat* ef, const char* spec, const char* options)
{
int rc;
enum exfat_mode mode;
exfat_tzset();
memset(ef, 0, sizeof(struct exfat));
parse_options(ef, options);
if (match_option(options, "ro"))
mode = EXFAT_MODE_RO;
else if (match_option(options, "ro_fallback"))
mode = EXFAT_MODE_ANY;
else
mode = EXFAT_MODE_RW;
ef->dev = exfat_open(spec, mode);
if (ef->dev == NULL)
return -EIO;
if (exfat_get_mode(ef->dev) == EXFAT_MODE_RO)
{
if (mode == EXFAT_MODE_ANY)
ef->ro = -1;
else
ef->ro = 1;
}
ef->sb = malloc(sizeof(struct exfat_super_block));
if (ef->sb == NULL)
{
exfat_close(ef->dev);
exfat_error("failed to allocate memory for the super block");
return -ENOMEM;
}
memset(ef->sb, 0, sizeof(struct exfat_super_block));
if (exfat_pread(ef->dev, ef->sb, sizeof(struct exfat_super_block), 0) < 0)
{
exfat_close(ef->dev);
free(ef->sb);
exfat_error("failed to read boot sector");
return -EIO;
}
if (memcmp(ef->sb->oem_name, "EXFAT ", 8) != 0)
{
exfat_close(ef->dev);
free(ef->sb);
exfat_error("exFAT file system is not found");
return -EIO;
}
/* sector cannot be smaller than 512 bytes */
if (ef->sb->sector_bits < 9)
{
exfat_close(ef->dev);
exfat_error("too small sector size: 2^%hhd", ef->sb->sector_bits);
free(ef->sb);
return -EIO;
}
/* officially exFAT supports cluster size up to 32 MB */
if ((int) ef->sb->sector_bits + (int) ef->sb->spc_bits > 25)
{
exfat_close(ef->dev);
exfat_error("too big cluster size: 2^(%hhd+%hhd)",
ef->sb->sector_bits, ef->sb->spc_bits);
free(ef->sb);
return -EIO;
}
ef->zero_cluster = malloc(CLUSTER_SIZE(*ef->sb));
if (ef->zero_cluster == NULL)
{
exfat_close(ef->dev);
free(ef->sb);
exfat_error("failed to allocate zero sector");
return -ENOMEM;
}
/* use zero_cluster as a temporary buffer for VBR checksum verification */
if (!verify_vbr_checksum(ef->dev, ef->zero_cluster, SECTOR_SIZE(*ef->sb)))
{
free(ef->zero_cluster);
exfat_close(ef->dev);
free(ef->sb);
return -EIO;
}
memset(ef->zero_cluster, 0, CLUSTER_SIZE(*ef->sb));
if (ef->sb->version.major != 1 || ef->sb->version.minor != 0)
{
free(ef->zero_cluster);
exfat_close(ef->dev);
exfat_error("unsupported exFAT version: %hhu.%hhu",
ef->sb->version.major, ef->sb->version.minor);
free(ef->sb);
return -EIO;
}
if (ef->sb->fat_count != 1)
{
free(ef->zero_cluster);
exfat_close(ef->dev);
exfat_error("unsupported FAT count: %hhu", ef->sb->fat_count);
free(ef->sb);
return -EIO;
}
if (le64_to_cpu(ef->sb->sector_count) * SECTOR_SIZE(*ef->sb) >
exfat_get_size(ef->dev))
{
/* this can cause I/O errors later but we don't fail mounting to let
user rescue data */
exfat_warn("file system is larger than underlying device: "
"%"PRIu64" > %"PRIu64,
le64_to_cpu(ef->sb->sector_count) * SECTOR_SIZE(*ef->sb),
exfat_get_size(ef->dev));
}
ef->root = malloc(sizeof(struct exfat_node));
if (ef->root == NULL)
{
free(ef->zero_cluster);
exfat_close(ef->dev);
free(ef->sb);
exfat_error("failed to allocate root node");
return -ENOMEM;
}
memset(ef->root, 0, sizeof(struct exfat_node));
ef->root->flags = EXFAT_ATTRIB_DIR;
ef->root->start_cluster = le32_to_cpu(ef->sb->rootdir_cluster);
ef->root->fptr_cluster = ef->root->start_cluster;
ef->root->name[0] = cpu_to_le16('\0');
ef->root->size = rootdir_size(ef);
if (ef->root->size == 0)
{
free(ef->root);
free(ef->zero_cluster);
exfat_close(ef->dev);
free(ef->sb);
return -EIO;
}
/* exFAT does not have time attributes for the root directory */
ef->root->mtime = 0;
ef->root->atime = 0;
/* always keep at least 1 reference to the root node */
exfat_get_node(ef->root);
rc = exfat_cache_directory(ef, ef->root);
if (rc != 0)
goto error;
if (ef->upcase == NULL)
{
exfat_error("upcase table is not found");
goto error;
}
if (ef->cmap.chunk == NULL)
{
exfat_error("clusters bitmap is not found");
goto error;
}
if (prepare_super_block(ef) != 0)
goto error;
return 0;
error:
exfat_put_node(ef, ef->root);
exfat_reset_cache(ef);
free(ef->root);
free(ef->zero_cluster);
exfat_close(ef->dev);
free(ef->sb);
return -EIO;
}
static void finalize_super_block(struct exfat* ef)
{
if (ef->ro)
return;
ef->sb->volume_state = cpu_to_le16(
le16_to_cpu(ef->sb->volume_state) & ~EXFAT_STATE_MOUNTED);
/* Some implementations set the percentage of allocated space to 0xff
on FS creation and never update it. In this case leave it as is. */
if (ef->sb->allocated_percent != 0xff)
{
uint32_t free, total;
free = exfat_count_free_clusters(ef);
total = le32_to_cpu(ef->sb->cluster_count);
ef->sb->allocated_percent = ((total - free) * 100 + total / 2) / total;
}
commit_super_block(ef); /* ignore return code */
}
void exfat_unmount(struct exfat* ef)
{
exfat_flush_nodes(ef); /* ignore return code */
exfat_flush(ef); /* ignore return code */
exfat_put_node(ef, ef->root);
exfat_reset_cache(ef);
free(ef->root);
ef->root = NULL;
finalize_super_block(ef);
exfat_close(ef->dev); /* close descriptor immediately after fsync */
ef->dev = NULL;
free(ef->zero_cluster);
ef->zero_cluster = NULL;
free(ef->cmap.chunk);
ef->cmap.chunk = NULL;
free(ef->sb);
ef->sb = NULL;
free(ef->upcase);
ef->upcase = NULL;
ef->upcase_chars = 0;
}
fuse-exfat-1.2.3/aclocal.m4 0000664 0001750 0001750 00000145333 12635220205 012355 0000000 0000000 # generated automatically by aclocal 1.15 -*- Autoconf -*-
# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
# serial 1 (pkg-config-0.24)
#
# Copyright © 2004 Scott James Remnant .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# PKG_PROG_PKG_CONFIG([MIN-VERSION])
# ----------------------------------
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
fi
if test -n "$PKG_CONFIG"; then
_pkg_min_version=m4_default([$1], [0.9.0])
AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
PKG_CONFIG=""
fi
fi[]dnl
])# PKG_PROG_PKG_CONFIG
# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
#
# Check to see whether a particular set of modules exists. Similar
# to PKG_CHECK_MODULES(), but does not set variables or print errors.
#
# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
# only at the first occurence in configure.ac, so if the first place
# it's called might be skipped (such as if it is within an "if", you
# have to call PKG_CHECK_EXISTS manually
# --------------------------------------------------------------
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
m4_default([$2], [:])
m4_ifvaln([$3], [else
$3])dnl
fi])
# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
# ---------------------------------------------
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
elif test -n "$PKG_CONFIG"; then
PKG_CHECK_EXISTS([$3],
[pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes ],
[pkg_failed=yes])
else
pkg_failed=untried
fi[]dnl
])# _PKG_CONFIG
# _PKG_SHORT_ERRORS_SUPPORTED
# -----------------------------
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi[]dnl
])# _PKG_SHORT_ERRORS_SUPPORTED
# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
# [ACTION-IF-NOT-FOUND])
#
#
# Note that if there is a possibility the first call to
# PKG_CHECK_MODULES might not happen, you should be sure to include an
# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
#
#
# --------------------------------------------------------------
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
pkg_failed=no
AC_MSG_CHECKING([for $1])
_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])
m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
and $1[]_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.])
if test $pkg_failed = yes; then
AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
$1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
else
$1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
m4_default([$4], [AC_MSG_ERROR(
[Package requirements ($2) were not met:
$$1_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
_PKG_TEXT])[]dnl
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
_PKG_TEXT
To get pkg-config, see .])[]dnl
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
AC_MSG_RESULT([yes])
$3
fi[]dnl
])# PKG_CHECK_MODULES
# PKG_INSTALLDIR(DIRECTORY)
# -------------------------
# Substitutes the variable pkgconfigdir as the location where a module
# should install pkg-config .pc files. By default the directory is
# $libdir/pkgconfig, but the default can be changed by passing
# DIRECTORY. The user can override through the --with-pkgconfigdir
# parameter.
AC_DEFUN([PKG_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
m4_pushdef([pkg_description],
[pkg-config installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([pkgconfigdir],
[AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
[with_pkgconfigdir=]pkg_default)
AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
]) dnl PKG_INSTALLDIR
# PKG_NOARCH_INSTALLDIR(DIRECTORY)
# -------------------------
# Substitutes the variable noarch_pkgconfigdir as the location where a
# module should install arch-independent pkg-config .pc files. By
# default the directory is $datadir/pkgconfig, but the default can be
# changed by passing DIRECTORY. The user can override through the
# --with-noarch-pkgconfigdir parameter.
AC_DEFUN([PKG_NOARCH_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
m4_pushdef([pkg_description],
[pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([noarch-pkgconfigdir],
[AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
[with_noarch_pkgconfigdir=]pkg_default)
AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
]) dnl PKG_NOARCH_INSTALLDIR
# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# -------------------------------------------
# Retrieves the value of the pkg-config variable for the given module.
AC_DEFUN([PKG_CHECK_VAR],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
_PKG_CONFIG([$1], [variable="][$3]["], [$2])
AS_VAR_COPY([$1], [pkg_cv_][$1])
AS_VAR_IF([$1], [""], [$5], [$4])dnl
])# PKG_CHECK_VAR
# Copyright (C) 2002-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.15'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
m4_if([$1], [1.15], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too. Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.15])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# Copyright (C) 2011-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_AR([ACT-IF-FAIL])
# -------------------------
# Try to determine the archiver interface, and trigger the ar-lib wrapper
# if it is needed. If the detection of archiver interface fails, run
# ACT-IF-FAIL (default is to abort configure with a proper error message).
AC_DEFUN([AM_PROG_AR],
[AC_BEFORE([$0], [LT_INIT])dnl
AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl
AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([ar-lib])dnl
AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false])
: ${AR=ar}
AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface],
[AC_LANG_PUSH([C])
am_cv_ar_interface=ar
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])],
[am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([am_ar_try])
if test "$ac_status" -eq 0; then
am_cv_ar_interface=ar
else
am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([am_ar_try])
if test "$ac_status" -eq 0; then
am_cv_ar_interface=lib
else
am_cv_ar_interface=unknown
fi
fi
rm -f conftest.lib libconftest.a
])
AC_LANG_POP([C])])
case $am_cv_ar_interface in
ar)
;;
lib)
# Microsoft lib, so override with the ar-lib wrapper script.
# FIXME: It is wrong to rewrite AR.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__AR in this case,
# and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
# similar.
AR="$am_aux_dir/ar-lib $AR"
;;
unknown)
m4_default([$1],
[AC_MSG_ERROR([could not determine $AR interface])])
;;
esac
AC_SUBST([AR])dnl
])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ([2.52])dnl
m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
[$1], [CXX], [depcc="$CXX" am_compiler_list=],
[$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
[$1], [UPC], [depcc="$UPC" am_compiler_list=],
[$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
am__universal=false
m4_case([$1], [CC],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac],
[CXX],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac])
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
[--enable-dependency-tracking],
[do not reject slow dependency extractors])
AS_HELP_STRING(
[--disable-dependency-tracking],
[speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
*\'*) eval set x "$CONFIG_FILES" ;;
*) set x $CONFIG_FILES ;;
esac
shift
for mf
do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each '.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])
[_AM_PROG_CC_C_O
])
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
[$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
[ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
AM_MISSING_PROG([AUTOCONF], [autoconf])
AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
AM_MISSING_PROG([AUTOHEADER], [autoheader])
AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target (and possibly the TAP driver). The
# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES([CC])],
[m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES([CXX])],
[m4_define([AC_PROG_CXX],
m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES([OBJC])],
[m4_define([AC_PROG_OBJC],
m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
[_AM_DEPENDENCIES([OBJCXX])],
[m4_define([AC_PROG_OBJCXX],
m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
AC_REQUIRE([AM_SILENT_RULES])dnl
dnl The testsuite driver may need to know about EXEEXT, so add the
dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard:
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: .
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
fi
fi
dnl The trailing newline in this macro's definition is deliberate, for
dnl backward compatibility and to allow trailing 'dnl'-style comments
dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
AC_SUBST([install_sh])])
# Copyright (C) 2003-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
am__quote=
_am_result=GNU
;;
esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=.include
am__quote="\""
_am_result=BSD
;;
esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it is modern enough.
# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
*)
MISSING="\${SHELL} $am_aux_dir/missing" ;;
esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
AC_MSG_WARN(['missing' script is too old or missing])
fi
])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# --------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_CC_C_O
# ---------------
# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
# to automatically call this.
AC_DEFUN([_AM_PROG_CC_C_O],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([compile])dnl
AC_LANG_PUSH([C])dnl
AC_CACHE_CHECK(
[whether $CC understands -c and -o together],
[am_cv_prog_cc_c_o],
[AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i])
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
(exit $ac_status); }])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[[\\\"\#\$\&\'\`$am_lf]]*)
AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
*[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
if test "$[2]" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT([yes])
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
AC_CONFIG_COMMANDS_PRE(
[AC_MSG_CHECKING([that generated files are newer than configure])
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
AC_MSG_RESULT([done])])
rm -f conftest.file
])
# Copyright (C) 2009-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
# ("yes" being less verbose, "no" or empty being verbose).
AC_DEFUN([AM_SILENT_RULES],
[AC_ARG_ENABLE([silent-rules], [dnl
AS_HELP_STRING(
[--enable-silent-rules],
[less verbose build output (undo: "make V=1")])
AS_HELP_STRING(
[--disable-silent-rules],
[verbose build output (undo: "make V=0")])dnl
])
case $enable_silent_rules in @%:@ (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
esac
dnl
dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
dnl do not support nested variable expansions.
dnl See automake bug#9928 and bug#10237.
am_make=${MAKE-make}
AC_CACHE_CHECK([whether $am_make supports nested variables],
[am_cv_make_support_nested_variables],
[if AS_ECHO([['TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi])
if test $am_cv_make_support_nested_variables = yes; then
dnl Using '$V' instead of '$(V)' breaks IRIX make.
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AC_SUBST([AM_V])dnl
AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Copyright (C) 2006-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
m4_if([$1], [v7],
[am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
[m4_case([$1],
[ustar],
[# The POSIX 1988 'ustar' format is defined with fixed-size fields.
# There is notably a 21 bits limit for the UID and the GID. In fact,
# the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
# and bug#13588).
am_max_uid=2097151 # 2^21 - 1
am_max_gid=$am_max_uid
# The $UID and $GID variables are not portable, so we need to resort
# to the POSIX-mandated id(1) utility. Errors in the 'id' calls
# below are definitely unexpected, so allow the users to see them
# (that is, avoid stderr redirection).
am_uid=`id -u || echo unknown`
am_gid=`id -g || echo unknown`
AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
if test $am_uid -le $am_max_uid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi
AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
if test $am_gid -le $am_max_gid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi],
[pax],
[],
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Go ahead even if we have the value already cached. We do so because we
# need to set the values for the 'am__tar' and 'am__untar' variables.
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
for _am_tool in $_am_tools; do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar; do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works.
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar /dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
fuse-exfat-1.2.3/Makefile.in 0000664 0001750 0001750 00000060236 12635220206 012561 0000000 0000000 # Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Makefile.am (30.03.15)
# Automake source.
#
# Free exFAT implementation.
# Copyright (C) 2010-2015 Andrew Nayenko
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/libexfat/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in COPYING ChangeLog README \
ar-lib compile depcomp install-sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EXEEXT = @EXEEXT@
FUSE_CFLAGS = @FUSE_CFLAGS@
FUSE_LIBS = @FUSE_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = libexfat fuse
all: all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-generic distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-am uninstall uninstall-am
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
fuse-exfat-1.2.3/README 0000664 0001750 0001750 00000002743 12635220203 011370 0000000 0000000 About
-----
This project aims to provide a full-featured [exFAT][1] file system implementation for Unix-like systems. It consists of a [FUSE][2] module (fuse-exfat) and a set of utilities (exfat-utils).
Supported operating systems:
* GNU/Linux
* Mac OS X 10.5 or later
* FreeBSD
* OpenBSD
Most GNU/Linux distributions already have fuse-exfat and exfat-utils in their repositories, so you can just install and use them. The next chapter describes how to compile them from source.
Compiling
---------
To build this project under GNU/Linux you need to install the following packages:
* pkg-config
* fuse-devel (or libfuse-dev)
* gcc
* make
Get the source code, change directory and compile:
./configure --prefix=/usr
make
Then install driver and utilities:
sudo make install
You can remove them using this command:
sudo make uninstall
Mounting
--------
Modern GNU/Linux distributions will mount exFAT volumes automatically—util-linux-ng 2.18 (was renamed to util-linux in 2.19) is required for this. Anyway, you can mount manually (you will need root privileges):
sudo mount.exfat-fuse /dev/sdXn /mnt/exfat
where /dev/sdXn is the partition special file, /mnt/exfat is a mountpoint.
Feedback
--------
If you have any questions, issues, suggestions, bug reports, etc. please create an [issue][3]. Pull requests are also welcome!
[1]: http://en.wikipedia.org/wiki/ExFAT
[2]: http://en.wikipedia.org/wiki/Filesystem_in_Userspace
[3]: https://github.com/relan/exfat/issues
fuse-exfat-1.2.3/ar-lib 0000755 0001750 0001750 00000013302 12566530340 011604 0000000 0000000 #! /bin/sh
# Wrapper for Microsoft lib.exe
me=ar-lib
scriptversion=2012-03-01.08; # UTC
# Copyright (C) 2010-2014 Free Software Foundation, Inc.
# Written by Peter Rosin .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
# func_error message
func_error ()
{
echo "$me: $1" 1>&2
exit 1
}
file_conv=
# func_file_conv build_file
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv in
mingw)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin)
file=`cygpath -m "$file" || echo "$file"`
;;
wine)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_at_file at_file operation archive
# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
# for each of them.
# When interpreting the content of the @FILE, do NOT use func_file_conv,
# since the user would need to supply preconverted file names to
# binutils ar, at least for MinGW.
func_at_file ()
{
operation=$2
archive=$3
at_file_contents=`cat "$1"`
eval set x "$at_file_contents"
shift
for member
do
$AR -NOLOGO $operation:"$member" "$archive" || exit $?
done
}
case $1 in
'')
func_error "no command. Try '$0 --help' for more information."
;;
-h | --h*)
cat <&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
sbin_PROGRAMS = mount.exfat-fuse$(EXEEXT)
subdir = fuse
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/libexfat/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(sbindir)"
PROGRAMS = $(sbin_PROGRAMS)
am_mount_exfat_fuse_OBJECTS = mount_exfat_fuse-main.$(OBJEXT)
mount_exfat_fuse_OBJECTS = $(am_mount_exfat_fuse_OBJECTS)
am__DEPENDENCIES_1 =
mount_exfat_fuse_DEPENDENCIES = ../libexfat/libexfat.a \
$(am__DEPENDENCIES_1)
mount_exfat_fuse_LINK = $(CCLD) $(mount_exfat_fuse_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/libexfat
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(mount_exfat_fuse_SOURCES)
DIST_SOURCES = $(mount_exfat_fuse_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(dist_man8_MANS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__DIST_COMMON = $(dist_man8_MANS) $(srcdir)/Makefile.in \
$(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EXEEXT = @EXEEXT@
FUSE_CFLAGS = @FUSE_CFLAGS@
FUSE_LIBS = @FUSE_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
dist_man8_MANS = mount.exfat-fuse.8
mount_exfat_fuse_SOURCES = main.c
mount_exfat_fuse_CPPFLAGS = -I$(top_srcdir)/libexfat
mount_exfat_fuse_CFLAGS = $(FUSE_CFLAGS)
mount_exfat_fuse_LDADD = ../libexfat/libexfat.a $(FUSE_LIBS)
all: all-am
.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fuse/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign fuse/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-sbinPROGRAMS: $(sbin_PROGRAMS)
@$(NORMAL_INSTALL)
@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p \
; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n;h' \
-e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) files[d] = files[d] " " $$1; \
else { print "f", $$3 "/" $$4, $$1; } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
} \
; done
uninstall-sbinPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-e 's/$$/$(EXEEXT)/' \
`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(sbindir)" && rm -f $$files
clean-sbinPROGRAMS:
-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
mount.exfat-fuse$(EXEEXT): $(mount_exfat_fuse_OBJECTS) $(mount_exfat_fuse_DEPENDENCIES) $(EXTRA_mount_exfat_fuse_DEPENDENCIES)
@rm -f mount.exfat-fuse$(EXEEXT)
$(AM_V_CCLD)$(mount_exfat_fuse_LINK) $(mount_exfat_fuse_OBJECTS) $(mount_exfat_fuse_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mount_exfat_fuse-main.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
mount_exfat_fuse-main.o: main.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mount_exfat_fuse_CPPFLAGS) $(CPPFLAGS) $(mount_exfat_fuse_CFLAGS) $(CFLAGS) -MT mount_exfat_fuse-main.o -MD -MP -MF $(DEPDIR)/mount_exfat_fuse-main.Tpo -c -o mount_exfat_fuse-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mount_exfat_fuse-main.Tpo $(DEPDIR)/mount_exfat_fuse-main.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main.c' object='mount_exfat_fuse-main.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mount_exfat_fuse_CPPFLAGS) $(CPPFLAGS) $(mount_exfat_fuse_CFLAGS) $(CFLAGS) -c -o mount_exfat_fuse-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c
mount_exfat_fuse-main.obj: main.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mount_exfat_fuse_CPPFLAGS) $(CPPFLAGS) $(mount_exfat_fuse_CFLAGS) $(CFLAGS) -MT mount_exfat_fuse-main.obj -MD -MP -MF $(DEPDIR)/mount_exfat_fuse-main.Tpo -c -o mount_exfat_fuse-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mount_exfat_fuse-main.Tpo $(DEPDIR)/mount_exfat_fuse-main.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main.c' object='mount_exfat_fuse-main.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mount_exfat_fuse_CPPFLAGS) $(CPPFLAGS) $(mount_exfat_fuse_CFLAGS) $(CFLAGS) -c -o mount_exfat_fuse-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`
install-man8: $(dist_man8_MANS)
@$(NORMAL_INSTALL)
@list1='$(dist_man8_MANS)'; \
list2=''; \
test -n "$(man8dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.8[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
done; }
uninstall-man8:
@$(NORMAL_UNINSTALL)
@list='$(dist_man8_MANS)'; test -n "$(man8dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS)
installdirs:
for dir in "$(DESTDIR)$(sbindir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-sbinPROGRAMS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man: install-man8
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-sbinPROGRAMS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
uninstall-man: uninstall-man8
.MAKE: install-am install-exec-am install-strip uninstall-am
.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
clean-sbinPROGRAMS cscopelist-am ctags ctags-am distclean \
distclean-compile distclean-generic distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-exec-hook install-html \
install-html-am install-info install-info-am install-man \
install-man8 install-pdf install-pdf-am install-ps \
install-ps-am install-sbinPROGRAMS install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-hook uninstall-man uninstall-man8 \
uninstall-sbinPROGRAMS
.PRECIOUS: Makefile
install-exec-hook:
ln -sf $(sbin_PROGRAMS) $(DESTDIR)$(sbindir)/mount.exfat
uninstall-hook:
rm -f $(DESTDIR)$(sbindir)/mount.exfat
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
fuse-exfat-1.2.3/fuse/main.c 0000664 0001750 0001750 00000033717 12624535420 012557 0000000 0000000 /*
main.c (01.09.09)
FUSE-based exFAT implementation. Requires FUSE 2.6 or later.
Free exFAT implementation.
Copyright (C) 2010-2015 Andrew Nayenko
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include
#define FUSE_USE_VERSION 26
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#ifndef DEBUG
#define exfat_debug(format, ...)
#endif
#if !defined(FUSE_VERSION) || (FUSE_VERSION < 26)
#error FUSE 2.6 or later is required
#endif
const char* default_options = "ro_fallback,allow_other,blkdev,big_writes,"
"default_permissions";
struct exfat ef;
static struct exfat_node* get_node(const struct fuse_file_info* fi)
{
return (struct exfat_node*) (size_t) fi->fh;
}
static void set_node(struct fuse_file_info* fi, struct exfat_node* node)
{
fi->fh = (uint64_t) (size_t) node;
fi->keep_cache = 1;
}
static int fuse_exfat_getattr(const char* path, struct stat* stbuf)
{
struct exfat_node* node;
int rc;
exfat_debug("[%s] %s", __func__, path);
rc = exfat_lookup(&ef, &node, path);
if (rc != 0)
return rc;
exfat_stat(&ef, node, stbuf);
exfat_put_node(&ef, node);
return 0;
}
static int fuse_exfat_truncate(const char* path, off_t size)
{
struct exfat_node* node;
int rc;
exfat_debug("[%s] %s, %"PRId64, __func__, path, size);
rc = exfat_lookup(&ef, &node, path);
if (rc != 0)
return rc;
rc = exfat_truncate(&ef, node, size, true);
if (rc != 0)
{
exfat_flush_node(&ef, node); /* ignore return code */
exfat_put_node(&ef, node);
return rc;
}
rc = exfat_flush_node(&ef, node);
exfat_put_node(&ef, node);
return rc;
}
static int fuse_exfat_readdir(const char* path, void* buffer,
fuse_fill_dir_t filler, off_t offset, struct fuse_file_info* fi)
{
struct exfat_node* parent;
struct exfat_node* node;
struct exfat_iterator it;
int rc;
char name[UTF8_BYTES(EXFAT_NAME_MAX) + 1];
exfat_debug("[%s] %s", __func__, path);
rc = exfat_lookup(&ef, &parent, path);
if (rc != 0)
return rc;
if (!(parent->flags & EXFAT_ATTRIB_DIR))
{
exfat_put_node(&ef, parent);
exfat_error("'%s' is not a directory (0x%x)", path, parent->flags);
return -ENOTDIR;
}
filler(buffer, ".", NULL, 0);
filler(buffer, "..", NULL, 0);
rc = exfat_opendir(&ef, parent, &it);
if (rc != 0)
{
exfat_put_node(&ef, parent);
exfat_error("failed to open directory '%s'", path);
return rc;
}
while ((node = exfat_readdir(&ef, &it)))
{
exfat_get_name(node, name, sizeof(name) - 1);
exfat_debug("[%s] %s: %s, %"PRId64" bytes, cluster 0x%x", __func__,
name, IS_CONTIGUOUS(*node) ? "contiguous" : "fragmented",
node->size, node->start_cluster);
filler(buffer, name, NULL, 0);
exfat_put_node(&ef, node);
}
exfat_closedir(&ef, &it);
exfat_put_node(&ef, parent);
return 0;
}
static int fuse_exfat_open(const char* path, struct fuse_file_info* fi)
{
struct exfat_node* node;
int rc;
exfat_debug("[%s] %s", __func__, path);
rc = exfat_lookup(&ef, &node, path);
if (rc != 0)
return rc;
set_node(fi, node);
return 0;
}
static int fuse_exfat_create(const char* path, mode_t mode,
struct fuse_file_info* fi)
{
struct exfat_node* node;
int rc;
exfat_debug("[%s] %s 0%ho", __func__, path, mode);
rc = exfat_mknod(&ef, path);
if (rc != 0)
return rc;
rc = exfat_lookup(&ef, &node, path);
if (rc != 0)
return rc;
set_node(fi, node);
return 0;
}
static int fuse_exfat_release(const char* path, struct fuse_file_info* fi)
{
/*
This handler is called by FUSE on close() syscall. If the FUSE
implementation does not call flush handler, we will flush node here.
But in this case we will not be able to return an error to the caller.
See fuse_exfat_flush() below.
*/
exfat_debug("[%s] %s", __func__, path);
exfat_flush_node(&ef, get_node(fi));
exfat_put_node(&ef, get_node(fi));
return 0; /* FUSE ignores this return value */
}
static int fuse_exfat_flush(const char* path, struct fuse_file_info* fi)
{
/*
This handler may be called by FUSE on close() syscall. FUSE also deals
with removals of open files, so we don't free clusters on close but
only on rmdir and unlink. If the FUSE implementation does not call this
handler we will flush node on release. See fuse_exfat_relase() above.
*/
exfat_debug("[%s] %s", __func__, path);
return exfat_flush_node(&ef, get_node(fi));
}
static int fuse_exfat_fsync(const char* path, int datasync,
struct fuse_file_info *fi)
{
int rc;
exfat_debug("[%s] %s", __func__, path);
rc = exfat_flush_nodes(&ef);
if (rc != 0)
return rc;
rc = exfat_flush(&ef);
if (rc != 0)
return rc;
return exfat_fsync(ef.dev);
}
static int fuse_exfat_read(const char* path, char* buffer, size_t size,
off_t offset, struct fuse_file_info* fi)
{
ssize_t ret;
exfat_debug("[%s] %s (%zu bytes)", __func__, path, size);
ret = exfat_generic_pread(&ef, get_node(fi), buffer, size, offset);
if (ret < 0)
return -EIO;
return ret;
}
static int fuse_exfat_write(const char* path, const char* buffer, size_t size,
off_t offset, struct fuse_file_info* fi)
{
ssize_t ret;
exfat_debug("[%s] %s (%zu bytes)", __func__, path, size);
ret = exfat_generic_pwrite(&ef, get_node(fi), buffer, size, offset);
if (ret < 0)
return -EIO;
return ret;
}
static int fuse_exfat_unlink(const char* path)
{
struct exfat_node* node;
int rc;
exfat_debug("[%s] %s", __func__, path);
rc = exfat_lookup(&ef, &node, path);
if (rc != 0)
return rc;
rc = exfat_unlink(&ef, node);
exfat_put_node(&ef, node);
if (rc != 0)
return rc;
return exfat_cleanup_node(&ef, node);
}
static int fuse_exfat_rmdir(const char* path)
{
struct exfat_node* node;
int rc;
exfat_debug("[%s] %s", __func__, path);
rc = exfat_lookup(&ef, &node, path);
if (rc != 0)
return rc;
rc = exfat_rmdir(&ef, node);
exfat_put_node(&ef, node);
if (rc != 0)
return rc;
return exfat_cleanup_node(&ef, node);
}
static int fuse_exfat_mknod(const char* path, mode_t mode, dev_t dev)
{
exfat_debug("[%s] %s 0%ho", __func__, path, mode);
return exfat_mknod(&ef, path);
}
static int fuse_exfat_mkdir(const char* path, mode_t mode)
{
exfat_debug("[%s] %s 0%ho", __func__, path, mode);
return exfat_mkdir(&ef, path);
}
static int fuse_exfat_rename(const char* old_path, const char* new_path)
{
exfat_debug("[%s] %s => %s", __func__, old_path, new_path);
return exfat_rename(&ef, old_path, new_path);
}
static int fuse_exfat_utimens(const char* path, const struct timespec tv[2])
{
struct exfat_node* node;
int rc;
exfat_debug("[%s] %s", __func__, path);
rc = exfat_lookup(&ef, &node, path);
if (rc != 0)
return rc;
exfat_utimes(node, tv);
rc = exfat_flush_node(&ef, node);
exfat_put_node(&ef, node);
return rc;
}
static int fuse_exfat_chmod(const char* path, mode_t mode)
{
const mode_t VALID_MODE_MASK = S_IFREG | S_IFDIR |
S_IRWXU | S_IRWXG | S_IRWXO;
exfat_debug("[%s] %s 0%ho", __func__, path, mode);
if (mode & ~VALID_MODE_MASK)
return -EPERM;
return 0;
}
static int fuse_exfat_chown(const char* path, uid_t uid, gid_t gid)
{
exfat_debug("[%s] %s %u:%u", __func__, path, uid, gid);
if (uid != ef.uid || gid != ef.gid)
return -EPERM;
return 0;
}
static int fuse_exfat_statfs(const char* path, struct statvfs* sfs)
{
exfat_debug("[%s]", __func__);
sfs->f_bsize = CLUSTER_SIZE(*ef.sb);
sfs->f_frsize = CLUSTER_SIZE(*ef.sb);
sfs->f_blocks = le64_to_cpu(ef.sb->sector_count) >> ef.sb->spc_bits;
sfs->f_bavail = exfat_count_free_clusters(&ef);
sfs->f_bfree = sfs->f_bavail;
sfs->f_namemax = EXFAT_NAME_MAX;
/*
Below are fake values because in exFAT there is
a) no simple way to count files;
b) no such thing as inode;
So here we assume that inode = cluster.
*/
sfs->f_files = le32_to_cpu(ef.sb->cluster_count);
sfs->f_favail = sfs->f_bfree >> ef.sb->spc_bits;
sfs->f_ffree = sfs->f_bavail;
return 0;
}
static void* fuse_exfat_init(struct fuse_conn_info* fci)
{
exfat_debug("[%s]", __func__);
#ifdef FUSE_CAP_BIG_WRITES
fci->want |= FUSE_CAP_BIG_WRITES;
#endif
return NULL;
}
static void fuse_exfat_destroy(void* unused)
{
exfat_debug("[%s]", __func__);
exfat_unmount(&ef);
}
static void usage(const char* prog)
{
fprintf(stderr, "Usage: %s [-d] [-o options] [-V] \n", prog);
exit(1);
}
static struct fuse_operations fuse_exfat_ops =
{
.getattr = fuse_exfat_getattr,
.truncate = fuse_exfat_truncate,
.readdir = fuse_exfat_readdir,
.open = fuse_exfat_open,
.create = fuse_exfat_create,
.release = fuse_exfat_release,
.flush = fuse_exfat_flush,
.fsync = fuse_exfat_fsync,
.fsyncdir = fuse_exfat_fsync,
.read = fuse_exfat_read,
.write = fuse_exfat_write,
.unlink = fuse_exfat_unlink,
.rmdir = fuse_exfat_rmdir,
.mknod = fuse_exfat_mknod,
.mkdir = fuse_exfat_mkdir,
.rename = fuse_exfat_rename,
.utimens = fuse_exfat_utimens,
.chmod = fuse_exfat_chmod,
.chown = fuse_exfat_chown,
.statfs = fuse_exfat_statfs,
.init = fuse_exfat_init,
.destroy = fuse_exfat_destroy,
};
static char* add_option(char* options, const char* name, const char* value)
{
size_t size;
char* optionsf = options;
if (value)
size = strlen(options) + strlen(name) + strlen(value) + 3;
else
size = strlen(options) + strlen(name) + 2;
options = realloc(options, size);
if (options == NULL)
{
free(optionsf);
exfat_error("failed to reallocate options string");
return NULL;
}
strcat(options, ",");
strcat(options, name);
if (value)
{
strcat(options, "=");
strcat(options, value);
}
return options;
}
static char* add_user_option(char* options)
{
struct passwd* pw;
if (getuid() == 0)
return options;
pw = getpwuid(getuid());
if (pw == NULL || pw->pw_name == NULL)
{
free(options);
exfat_error("failed to determine username");
return NULL;
}
return add_option(options, "user", pw->pw_name);
}
static char* add_blksize_option(char* options, long cluster_size)
{
long page_size = sysconf(_SC_PAGESIZE);
char blksize[20];
if (page_size < 1)
page_size = 0x1000;
snprintf(blksize, sizeof(blksize), "%ld", MIN(page_size, cluster_size));
return add_option(options, "blksize", blksize);
}
static char* add_fuse_options(char* options, const char* spec)
{
options = add_option(options, "fsname", spec);
if (options == NULL)
return NULL;
options = add_user_option(options);
if (options == NULL)
return NULL;
options = add_blksize_option(options, CLUSTER_SIZE(*ef.sb));
if (options == NULL)
return NULL;
return options;
}
int main(int argc, char* argv[])
{
struct fuse_args mount_args = FUSE_ARGS_INIT(0, NULL);
struct fuse_args newfs_args = FUSE_ARGS_INIT(0, NULL);
const char* spec = NULL;
const char* mount_point = NULL;
char* mount_options;
int debug = 0;
struct fuse_chan* fc = NULL;
struct fuse* fh = NULL;
int opt;
printf("FUSE exfat %s\n", VERSION);
mount_options = strdup(default_options);
if (mount_options == NULL)
{
exfat_error("failed to allocate options string");
return 1;
}
while ((opt = getopt(argc, argv, "dno:Vv")) != -1)
{
switch (opt)
{
case 'd':
debug = 1;
break;
case 'n':
break;
case 'o':
mount_options = add_option(mount_options, optarg, NULL);
if (mount_options == NULL)
return 1;
break;
case 'V':
free(mount_options);
puts("Copyright (C) 2010-2015 Andrew Nayenko");
return 0;
case 'v':
break;
default:
free(mount_options);
usage(argv[0]);
break;
}
}
if (argc - optind != 2)
{
free(mount_options);
usage(argv[0]);
}
spec = argv[optind];
mount_point = argv[optind + 1];
if (exfat_mount(&ef, spec, mount_options) != 0)
{
free(mount_options);
return 1;
}
if (ef.ro == -1) /* read-only fallback was used */
{
mount_options = add_option(mount_options, "ro", NULL);
if (mount_options == NULL)
{
exfat_unmount(&ef);
return 1;
}
}
mount_options = add_fuse_options(mount_options, spec);
if (mount_options == NULL)
{
exfat_unmount(&ef);
return 1;
}
/* create arguments for fuse_mount() */
if (fuse_opt_add_arg(&mount_args, "exfat") != 0 ||
fuse_opt_add_arg(&mount_args, "-o") != 0 ||
fuse_opt_add_arg(&mount_args, mount_options) != 0)
{
exfat_unmount(&ef);
free(mount_options);
return 1;
}
free(mount_options);
/* create FUSE mount point */
fc = fuse_mount(mount_point, &mount_args);
fuse_opt_free_args(&mount_args);
if (fc == NULL)
{
exfat_unmount(&ef);
return 1;
}
/* create arguments for fuse_new() */
if (fuse_opt_add_arg(&newfs_args, "") != 0 ||
(debug && fuse_opt_add_arg(&newfs_args, "-d") != 0))
{
fuse_unmount(mount_point, fc);
exfat_unmount(&ef);
return 1;
}
/* create new FUSE file system */
fh = fuse_new(fc, &newfs_args, &fuse_exfat_ops,
sizeof(struct fuse_operations), NULL);
fuse_opt_free_args(&newfs_args);
if (fh == NULL)
{
fuse_unmount(mount_point, fc);
exfat_unmount(&ef);
return 1;
}
/* exit session on HUP, TERM and INT signals and ignore PIPE signal */
if (fuse_set_signal_handlers(fuse_get_session(fh)) != 0)
{
fuse_unmount(mount_point, fc);
fuse_destroy(fh);
exfat_unmount(&ef);
exfat_error("failed to set signal handlers");
return 1;
}
/* go to background (unless "-d" option is passed) and run FUSE
main loop */
if (fuse_daemonize(debug) == 0)
{
if (fuse_loop(fh) != 0)
exfat_error("FUSE loop failure");
}
else
exfat_error("failed to daemonize");
fuse_remove_signal_handlers(fuse_get_session(fh));
/* note that fuse_unmount() must be called BEFORE fuse_destroy() */
fuse_unmount(mount_point, fc);
fuse_destroy(fh);
return 0;
}
fuse-exfat-1.2.3/COPYING 0000664 0001750 0001750 00000043254 12566525370 011565 0000000 0000000 GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
Copyright (C)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.